孙振忠

2026

Role of non-equilibrium solidification effects in tuning martensitic transformation of laser powder bed fusion-fabricated NiTi shape memory alloys

Materials Science & Engineering: A

DOI

2026

External magnetic fields tailor grain texture in laser powder bed fusion fabricated 316 L alloys

Journal of Materials Research and Technology

DOI

2026

Effect of C and Mn co-segregation at bcc-Fe grain boundaries: First-principles calculations and 3D-APT analysis

Computational materials science

DOI

2026

Synergistic strengthening from chemical and dislocation cellular structures in LPBF-fabricated concentrated solid-solution alloys

Journal of Materials Research and Technology

DOI

2026

Effect of rhenium (Re) addition on the microstructure evolution, electrical conductivity and tensile properties of Al–Mg–Si alloy

Archives of Civil and Mechanical Engineering

DOI

2026

The effect of rhenium (Re) on the microstructure evolution and tensile strength of the as-annealed Al–Cu–Mg cold rolled sheet during isothermal annealing at 320 °C

Materials Science & Engineering: A

DOI

2026

A novel strengthening mechanism in Al-Mg alloys induced by Fe addition revealed by in-situ high energy X-ray diffraction

Materials Science and Engineering A

DOI

2026

Deformation behavior of an Al-Zn-Mg-Cu alloy studied by in-situ synchrotron X-ray and neutron diffraction

Materials Science and Engineering A

DOI

2026

Revealing the deformation mechanisms in Al-Mg alloys with different Fe contents by synchrotron X-ray and finite element simulation

Journal of Alloys and Compounds

DOI

2026

In situ foaming-reaction fabrication of gas-permeable 18Ni300 maraging mold steel using laser powder bed fusion

Rapid Prototyping Journal

DOI

2026

High-temperature tribological performance of SiC p /Al composite

Journal of Asian Ceramic Societies

DOI

2025

课程思政教学方法探究——以“工程化学”课程为例

《教育教学论坛》

DOI

2025

移动型3-UPU并联机构工作空间范围和精度的相关因素分析

《现代制造技术与装备》

DOI

2025

时效处理对铸态Co-28Cr合金组织和性能的影响

《稀有金属》

DOI

2025

工程材料及成形技术基础

《机械工业出版社》

2025

Dispersion spectrum and transient responses of guided waves in graphene platelet reinforced piezoelectric polymer composite plates

Aerospace Science and Technology

DOI

2025

First-principles study on the effect of Ce on segregation behavior of bcc-Fe grain boundaries in low-carbon low-alloy steel

Journal of Materials Research and Technology

DOI

2025

Influence of microstructural heterogeneity on the plastic strain localisation in selective laser melted 18Ni-300 maraging steel

International journal of plasticity

DOI

2025

Effect of Ce on the microstructure, mechanical properties and dislocation state in low-carbon low-alloy steels

Materials Science & Engineering: A

DOI

2025

Developing a novel austenitic stainless steel with high yield strength and coefficient of thermal expansion

Materials Research Letters

DOI

2025

Influence of Magnetron Sputtering Parameters on Speckle Characteristics for Application in Microscale DIC of Maraging Steel

Materials Science Forum

DOI

2025

Multiscale study of the microstructure and strengthening mechanism of an Al-Si-Fe alloys using synchrotron X-ray

Vacuum

DOI

2025

Effect of Mn on the primary Fe-rich phases formation and thermal conductivity of Al-3Fe alloys

Journal of Alloys and Compounds

DOI

2025

Achieved strength-ductility simultaneous enhancement of FSPed Al-Cu alloys via Zr addition revealed by synchrotron X-ray diffraction and tomography

Materials Science and Engineering A

DOI

2025

Comparative analysis of processing technology on the deformation behavior of Al alloys studied by synchrotron X-ray diffraction and tomography

International Journal of Plasticity

DOI

2024

面向区域制造业高端转型的东莞理工学院先进制造学院(长安)校企合作课程开发实践

《东莞理工学院学报》

2024

微量Ce添加对Al-Si-Fe铝合金微观组织及导热性能的影响

《铸造技术》

2024

难熔高熵合金力学性能的研究进展

《粉末冶金工业》

2024

CoCrFeNi系高熵合金的力学性能研究现状

《热加工工艺》

2024

The effects of specimens geometry on solidification conditions and microstructure formation in laser powder bed fusion fabricated Ti‒6Al‒4V alloys

Journal of Materials Research and Technology

DOI

2024

Effect of Si on the deformation behavior of retained austenite and annealed martensite in medium Mn steels

Materials Science & Engineering: A

DOI

2024

Effect of total iron and silicon contents and homogenization on the microstructure and performance of 6201 Al–Mg–Si ingots

Archives of Civil and Mechanical Engineering

DOI

2024

Carbon Fiber Breakage Mechanism in Aluminum (Al)/Carbon Fibers (CFs) Composite Sheet during Accumulative Roll Bonding (ARB) Process

Journal of Wuhan University of Technology-Mater. Sci. Ed.

DOI

2024

Comparative study of as-annealed pure Al and Al–Te: An insight into texture-electrical/mechanical property correlations

Journal of Alloys and Compounds

DOI

2024

Effect of heat treatment on the deformation behavior of an Al–Cu alloy studied by in-situ synchrotron X-ray diffraction

Materials Science and Engineering A

DOI

2024

Tailoring thermal conductivity and microstructure of Al–Fe alloys by addition of Sc2O3 and variable cooling rates

Journal of Materials Research and Technology

DOI

2024

Insight into the Fe-rich phases strengthening mechanisms of non-heat-treatable Al-Mg-Mn-Fe-Cu alloys

Journal of Material Science and Technology

DOI

2024

Cover Picture: Materials and Corrosion. 4/2024

Materials and Corrosion

DOI

2024

Corrosion resistance and mechanism of high‐entropy alloys: A review

Materials and Corrosion

DOI

2024

Effect of Ti content on the microstructure and mechanical properties of TixZrNbMoV lightweight refractory high-entropy alloys

International Journal of Refractory Metals and Hard Materials

DOI

2023

卓越工程师理念下机械专业学位研究生培养模式的探索与实践

《华东科技》

2023

Investigating the influence of Si on dynamic recrystallization during hot deformation behavior of ultra-high-strength lightweight steel

Journal of Materials Research and Technology

DOI

2023

Contribution of the Fe-rich phase particles to the high temperature mechanical behaviour of an Al-Cu-Fe alloy

Journal of Alloys and Compounds

DOI

2023

Effects of Fe and Cr on the microstructure and mechanical properties of FexCr72−xNi14Al14 high-entropy alloys

Journal of Alloys and Compounds

DOI

2023

Effect of ultrasonic melt processing and cooling rate on microstructure evolution of Al–Cu–Mn–Mg–Fe–Si alloy

Journal of Materials Research and Technology

DOI

2023

Microstructure and mechanical properties of Zr46Cu46Al8 bulk metallic glass after annealing treatment

Journal of Non-Crystalline Solids

DOI

2023

Evolution of B19’ phase during annealing and its influence on the mechanical properties of Zr45Cu45Al10 metallic glass composites

Intermetallics

DOI

2023

New insight of texture and microstructure evolution, and the connections between with tensile performance in as-annealed Al-Cu-Mg-Zr sheet

Journal of Alloys and Compounds

DOI

2023

Effect of Ultrasonic Treatment and Squeeze Casting on the Microstructural Refinement of Al–Cu–Mn Alloys

International Journal of Metalcasting

DOI

2023

Zero thermal expansion and high Young's modulus in Ti-Nb achieved by concurrent α″iso and ω precipitation

Scripta Materialia

DOI

2023

Influence of Fe-rich phases and precipitates on the mechanical behaviour of Al-Cu-Mn-Fe-Sc-Zr alloys studied by synchrotron X-ray and neutron

Journal of Material Science and Technology

DOI

2023

Influence of non-equilibrium solidification of melt pools and annealing on microstructure formation and mechanical properties of laser powder bed fusion-built Ti–6Al–4V alloys

Materials Science and Engineering A

DOI

2023

Effect of Si on the dislocation state within martensite of ultra-high strength hot-rolled medium Mn steel with good ductility

Materials Science and Engineering A

DOI

2022

基于316L激光选区嫁接成型18Ni300的工艺与性能研究

《机电工程技术》

2022

工程材料及成型技术课程思政的发掘与融合

《高教学刊》

2022

SLM成形参数对18Ni-300模具钢致密度的影响

Laser & Optoelectronics Progress

DOI

2022

A new hot-rolled lightweight steel with ultra-high strength and good ductility designed by dislocation character and transformation strain

Scripta Materialia

DOI

2022

In-situ synchrotron X-ray radiography study of primary Fe-rich phases growth in Al-Fe( Cu) alloys

Materials Characterization

DOI

2022

Optimization of Selective Laser Melting Process Parameters Via Taguchi's Methods and Gray Relational Analysis for 3D Printing of 18Ni‐300 Maraging Steel

steel research international

DOI

2022

Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys

Ultrasonics Sonochemistry

DOI

2022

Uncovering electromigration effect on densification during electrical field assisted sintering

Journal of Materials Processing Technology

DOI

2021

以科技竞赛为依托的车辆工程专业教学改革的探讨

《科技风》

DOI

2021

扫描间隙对激光粉床熔融GH4169合金微观组织及硬度的影响

《精密成形工程》

2021

Interplay of microstructure and mechanical properties of WC-6Co cemented carbides by hot oscillating pressing method

Ceramics International

DOI

2021

Revealing the Influence of Fe on Fe-Rich Phases Formation and Mechanical Properties of Cast Al-Mg-Mn-Fe Alloys

Social Science Research Network

DOI

2021

Interaction of austenite reversion with precipitation/dissolution during aging in a medium Mn steel alloyed with Cu, Ni and Al

Materials Characterization

DOI

2021

Correction to: Microstructure Evolution in Additively Manufactured Steel Molds: A Review

Journal of materials engineering and performance (Print)

DOI

2021

Analysis of precipitation characteristics of TiC at different quenching and partitioning temperatures and its effect on the mechanical properties

DOI

2021

Microstructure Evolution in Additively Manufactured Steel Molds: A Review

Journal of materials engineering and performance (Print)

DOI

2021

Revealing the Nucleation and Growth Mechanisms of Fe-Rich Phases in Al-Cu-Fe(-Si) Alloys Under the Influence of Al-Ti-B

Intermetallics

DOI

2021

Nano-precipitation leading to linear zero thermal expansion over a wide temperature range in Ti22Nb

DOI

2021

Nucleation and growth of Fe-rich phases in Al-5Ti-1B modified Al-Fe alloys investigated using synchrotron X-ray imaging and electron microscopy

Journal of Materials Science & Technology

DOI

2021

Continuous texture evolution during staged solid solution of Al‐Cu‐Mg and the influence on fatigue resistance

DOI

2021

Insights of texture and microstructure evolution in the short time annealing of Al-Cu-Mg alloy at large temperature range

DOI

2021

Novel Ta46.5W35Co18.5 thin film metallic glass with excellent corrosion resistance, high hardness and good thermal stability

Journal of Alloys and Compounds

DOI

2021

Pronounced β-relaxation in plastic FeNi-based bulk metallic glasses and its structural origin

Intermetallics

DOI

2020

现代产业学院多方协同育人模式探索与实践——以东莞理工学院先进制造学院(长安)为例

《东莞理工学院学报》

DOI

2020

3D打印手机保护壳自动化生产线的开发

《机电工程技术》

2020

大科学装置样品环境设备的研究进展

《机电工程技术》

2020

基于声音信号的微型电机故障诊断方法研究

《机床与液压》

2020

基于双赛制机器人教学在工程训练课程中的改革实践

《教育现代化》

DOI

2020

基于组合矩和随机森林的转子轴心轨迹识别

《机床与液压》

2020

Micromechanical Behavior of Transformation‐Induced Plasticity‐Assisted Annealed Martensitic Steel Using In Situ Neutron Diffraction

Steel Research International

DOI

2020

Effect of multiphase microstructure on fatigue crack propagation behavior in TRIP-assisted steels

DOI

2020

Texture evolution in hot-rolled Al–Cu–Mg sheets using orientation streamline approach and texture index

DOI

2020

Optimization of process parameters using the Grey-Taguchi method and experimental validation in TRIP-assisted steel

Materials Science & Engineering: A

DOI

2020

Multiscale characterization of the nucleation and 3D structure of Al3Sc phases using electron microscopy and synchrotron X-ray tomography

Materials Characterization

DOI

2020

Multi-joint Industrial Robot Fault Identification using Deep Sparse Auto-Encoder Network with Attitude Data

Prognostics and Health Management Conference (PHM)

DOI

2020

Intelligent Fault Diagnosis of Delta 3D Printers Using Local Support Vector Machine by a Cheap Attitude Multi-sensor

Prognostics and Health Management Conference (PHM)

DOI

2020

Preparation, microstructure, and microhardness of selective laser-melted W–3Ta sample

Journal of materials research/Pratt's guide to venture capital sources

DOI

2020

A robust dynamic scheduling approach based on release time series forecasting for the steelmaking-continuous casting production

Applied Soft Computing

DOI

2019

面向高素质应用型工科人才培养的地方高校“校政企协”协同育人模式探索与实践

《教育现代化》

DOI

2019

现代产业学院协同共建的新模式——以东莞理工学院先进制造学院(长安)为例

《高等工程教育研究》

2019

3D characterization of the primary Al$_3$Sc phases in an Al-Sc alloy using Synchrotron X-ray tomography and electron microscopy

2019

Effect of Compound Fields of Ultrasonic Vibration and Applied Pressure on the 3D Microstructure and Tensile Properties of Recycled Al-Cu-Mn-Fe-Si Alloys

Materials

DOI

2019

Micro-mechanism of texture evolution during isochronal annealing of as-annealed hot rolled Al-Cu-Mg sheet

Materials & Design (1980-2015)

DOI

2019

Finite element analysis of thermal behavior and experimental investigation of Ti6Al4V in selective laser melting

Optik

DOI

2019

Densification, Microstructure and Properties of 90W-7Ni-3Fe Fabricated by Selective Laser Melting

Metals

DOI

2019

Evolution of functional properties realized by increasing laser scanning speed for the selective laser melting fabricated NiTi alloy

Journal of Alloys and Compounds

DOI

2019

Deep Hybrid State Network With Feature Reinforcement for Intelligent Fault Diagnosis of Delta 3-D Printers

IEEE Transactions on Industrial Informatics

DOI

2019

A Novel Sparse Echo Autoencoder Network for Data-Driven Fault Diagnosis of Delta 3-D Printers

IEEE Transactions on Instrumentation and Measurement

DOI

2018

Manufacturing Quality Prediction Using Intelligent Learning Approaches: A Comparative Study

Sustainability，Vol. 10, No. 1

DOI

2018

3D characterization of ultrasonic melt processing on the microstructural refinement of Al Cu alloys using synchrotron X-ray tomography

Materials Characterization

DOI

2018

Dynamic condition monitoring for 3D printers by using error fusion of multiple sparse auto-encoders

Computers in Industry

DOI

2018

An Adaptive Genetic Algorithm for Solving Practical Scheduling with Maintenance Plan and Different Accessibility Relations in Steel Plants

Prognostics and System Health Management Conference

DOI

2018

Robust Dynamic Scheduling with Uncertain Release Time for the Steelmaking-Continuous Casting Production

International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC)

DOI

2018

Variable neighborhood search for integrated determination of charge batching and casting start time in steel plants

Journal of Intelligent & Fuzzy Systems

DOI

2018

A comparison of dimension reduction techniques for support vector machine modeling of multi-parameter manufacturing quality prediction

Journal of Intelligent Manufacturing

DOI

2018

Practical Production Scheduling for Hot Metal Pretreatment-Steelmaking-Continuous Casting Process Involving Preventive Maintenance Consideration

IEEE Access

DOI

2017

工艺参数对激光3D智能打印效果的分析研究

《激光杂志》

2017

弹簧钢51CrV4中微量元素耦合热力学分析及其热处理行为

《热加工工艺》

2017

铸坯到轧材的表面缺陷演变行为研究

《失效分析与预防》

2017

Manufacturing Quality Prediction Based on Two-Step Feature Learning Approach

International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC)

DOI

2017

Modeling and Optimization Algorithm for the Integrated Charge Batching and Casting Start Time Determining Problem

International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC)

DOI

2017

Deep neural network for manufacturing quality prediction

Prognostics and System Health Management Conference

DOI

2016

自扶正四刃剪切工具设计

《东莞理工学院学报》

2016

多孔镁骨植入体三维建模及力学性能有限元分析

《机电工程技术》

2016

基于Moldex3D的塑胶模具随形冷却水道优化设计

《机电工程技术》

2016

Hybrid Optimization Algorithm of Particle Swarm Optimization and Cuckoo Search for Preventive Maintenance Period Optimization

Discrete Dynamics in Nature and Society

DOI

2016

An Approach for Integrated Analysis of Human Factors in Remote Handling Maintenance

Science and Technology of Nuclear Installations

DOI

2015

遥控维护条件下管道夹取技术研究

《东莞理工学院学报》

2015

基于自适应变异粒子群优化算法的产品装配序列规划

《组合机床与自动化加工技术》

2015

CSNS靶站水化学实验平台研制

《化学工程与装备》

2015

面向现代制造业的金工实习研究和实践

《中国现代教育装备》

2015

基于卓越工程师培养目标和“学习产出”(OBE)教学模式的机械设计课程群的建设与改革

《教育教学论坛》

2015

Improved Cat Swarm Optimization Algorithm for Assembly Sequence Planning

The Open Automation and Control Systems Journal

DOI

2015

An Improved Shuffled Frog Leaping Algorithm for Assembly Sequence Planning of Remote Handling Maintenance in Radioactive Environment

Science and Technology of Nuclear Installations

DOI

2015

Multilayered Pipe Cutting Test for Remote Handling Maintenance

Science and Technology of Nuclear Installations

DOI

2014

基于混合蛙跳算法的复杂产品装配序列规划

《计算机集成制造系统》

DOI

2014

Research on bolt assemble/disassemble operation for hotcell remote handling maintenance

Advances in engineering research/Advances in Engineering Research

DOI

2013

遥控维护任务空间的立体视觉系统标定

《东莞理工学院学报》

2013

设备e-维护知识网络模型

《计算机集成制造系统》

2013

遥控维护条件下冷却管道剪切试验

《东莞理工学院学报》

2013

泡沫铝三明治板冲压成形数值模拟分析

《东莞理工学院学报》

2013

冲击作用下伪弹性形状记忆合金梁的数值模拟研究

《东莞理工学院学报》

2013

虚拟现实技术在热室遥控维护中的应用研究

《机械制造与自动化》

2013

Numerical Simulation Analysis on Stamping of Foam Aluminum Sandwich Panels

Journal of Dongguan University of Technology

2013

Numerical Study on Pseudo-Elastic Shape Memory Alloy Beam Under Impact

Journal of Dongguan University of Technology

2012

泡沫铝金属材料两种制备工艺的探讨

《热加工工艺》

2012

面向卓越工程师的企业工程实践培养模式

《实验室研究与探索》

2012

热室遥控交换装置的结构设计与优化分析

《机电工程技术》

2011

泡沫金属材料的特种加工工艺

《现代制造工程》

2011

基于Mach3软件的经济型五轴雕刻机开发

《装备制造技术》

2011

泡沫铝塑性成形加工技术研究

《轻合金加工技术》

2011

泡沫铝芯填充合金的制造工艺技术研究

《热加工工艺》

2011

覆盖件面畸变缺陷形成机理研究

《机械科学与技术》

2011

三维锡膏测厚误差补偿系统的研究

《机电工程技术》

2011

Special processing technology of foam metal materials

Modern Manufacturing Engineering

2011

Research on plastic forming process of foam aluminum material

Light Alloy Fabrication Technology

2011

Development of a Five-axes Eengraving Machine based on Mach3 Software

Equipment Manufacturing Technology

2010

泡沫铝三明治板材U型弯曲成形变压边力控制研究

《锻压技术》

2010

泡沫铝芯三明治板材U型弯曲成形试验研究

《精密成形工程》

2010

网络化CAD/CAM职业技能认证实践

《机械管理开发》

DOI

2010

金工实习教学项目工程化研究

《中国现代教育装备》

2010

Study on variable blank holderforce control in foam aluminum sandwich panel U-bending

Duanya jishu

2010

Practice on Vocational Skills Certification of Networked CAD/CAM

Mechanical Management and Development

2009

SolidWorks软件在机械类专业金工实习中的应用

《机械》

2009

局部加压工艺对面畸变控制的机理研究

《热加工工艺》

2009

金工实习中消失模铸造的基本技术要求

《中国教育技术装备》

2009

The application of SolidWorks in the metalworking practice of mechanical specialty

Modern Machinery

2008

汽车覆盖件成形中的面畸变及其工程控制

《锻压装备与制造技术》

2007

薄板件任意点法向力学参数测量仪误差建模与仿真

《机械工程师》

2007

Experimental study on controlling technique of surface deflection

Journal of Materials Processing Technology

DOI

2007

Error Model and Simulation to Arbitrary Point of Sheet Metal in Normal Mechanical Parameter Measurement Instrument

Mechanical Engineer

2005

冲压模具的参数化设计

《制造技术与机床》

2005

柱面扁壳形状不良的实验研究

《哈尔滨工业大学学报》

2004

应用韧性断裂准则预测盒形件拉深成形极限

《哈尔滨工业大学学报》

2001

机械式旋切机盘状凸轮进给机构设计研究

《机械工程师》

2001

硬质合金地板刀的研制

《现代制造工程》

DOI

2000

基于参数化注射模具结构CAD图形库系统

《哈尔滨工业大学学报》

2025

3d Microstructure, Thermal Conductivity and Mechanical Properties of Al-Si-Fe Alloys with Trace CE

SSRN Electronic Journal

DOI

2024

Achieving the Superior Corrosion Resistance of a Co-Free Hea By Tuning B2 Phase

SSRN Electronic Journal

DOI

2024

Effect of Cooling Rate and Fe Content on Microstructure Evolution of Al-Cu-Mn-Mg-Fe-Si Alloys Characterized by Synchrotron X-Ray Imaging

SSRN Electronic Journal

DOI