郑津洋

期刊论文

1. Xinyi Jiang, Chutian Shen, Baihui Xing, Juan Shang, Zhengli Hua, Jinyang Zheng (2026). The different hydrogen diffusion behaviors in α and γ of duplex stainless steel studied by in-situ scanning Kelvin probe force microscopy. International journal of hydrogen energy.DOI
2. Jinyang Zheng, Xizheng Wang, Ruizhe Gao, Hai Tang, Haotian Wei, Baihui Xing, Zhengli Hua (2026). Research on the fatigue crack growth rate model for X80 pipeline steel in a hydrogen environment. International journal of hydrogen energy.DOI
3. Chen Lu, Peng Cai, Zhen-Quan Zhang, Ruiming Zhang, Zheng-Li Hua, Jinyang Zheng (2026). Study on shock wave and spontaneously combusting flame produced by high-pressure hydrogen release through C-scored rupture disk. Combustion and Flame.DOI
4. Haoshen Yu, Bei Li, Bing Han, Yan Liu, Xingtao Dai, Jun Hu, Jinyang Zheng, Linzhi Zou (2026). Explosive shock effects of type III hydrogen storage tank (70 MPa) with protective barriers: Full-scale explosion tests and fluid-solid coupling analysis. Chemical engineering research & design.DOI
5. Kai Ma, Ruiming Zhang, Chen Lu, Jiangchuan Hu, Yu Huang, Taotao Li, Jinyang Zheng (2026). A quantitative method for determining hydrogen distribution at fatigue crack tips in austenitic stainless steel by SKPFM/TDS. Corrosion Science.DOI
6. Jiangchuan Hu, Kai Ma, Zhen-Quan Zhang, Wenzhu Peng, Jinyang Zheng (2026). Multi-constraint structural optimization design method for large-capacity Type III hydrogen cylinders with steel liners in long-tube trailers. International journal of hydrogen energy.DOI
7. Xin Liu, Kaiyu Zhang, Wanliang Zhang, Jinrong Wu, K. K. Wu, Chengshuang Zhou, Lin Zhang, Jinyang Zheng (2026). Texture and nano-precipitates synergistically suppress hydrogen embrittlement susceptibility in titanium-free maraging steel. Corrosion Science.DOI
8. 王柯卿，何宇航，戚亮亮，施建峰，郑津洋（2025）. O型密封圈在液化石油气环境下老化性能研究与寿命预测. 《压力容器先进技术——第十一届全国压力容器学术会议论文集（下）》.DOI
9. 马利，郑津洋（2025）. 碳纤维全缠绕高压气瓶细观缺陷的行为响应与检测评价方法. 《压力容器先进技术——第十一届全国压力容器学术会议论文集（下）》.DOI
10. 张睿明，陆晨，彭文珠，管俊豪，马凯，郑津洋（2025）. 自增强对铬钼钢储氢容器疲劳寿命的影响. 《压力容器先进技术——第十一届全国压力容器学术会议论文集(上)》.
11. 花争立，高睿哲，邢百汇，尚娟，郑津洋，彭文珠，赵益明（2025）. 氢气管道发展现状及挑战：从材料、设计以及完整性角度（英文）. Journal of Zhejiang University-Science A.
12. Yifan Li, Huiming Ding, Wenzhu Peng, Zhengli Hua, Jinyang Zheng (2025). Residual burst pressure prediction of COPVs after long-term seawater immersion subjected to internal pressure. Composites Part B: Engineering.DOI
13. Zhengli Hua, Ruizhe Gao, Baihui Xing, Juan Shang, Jinyang Zheng, Wenzhu Peng, Yiming Zhao (2025). State-of-the-art and knowledge gaps in gaseous hydrogen pipelines: from the perspective of materials, design, and integrity management. Journal of Zhejiang University: Science A.DOI
14. Zheng-Li Hua, Wei Gao, Shuanghe Chi, Xizheng Wang, Jinyang Zheng (2025). Development status and challenges of high-pressure gaseous hydrogen storage vessels and cylinders in China. Renewable & Sustainable Energy Reviews.DOI
15. Guilong Liu, Bei Li, Siwei Tao, Xin Jin, Donglei Sun, Jun Hu, Jinyang Zheng (2025). Full-scale explosion experiment and overpressure prediction method for 70 MPa hydrogen fuel cell vehicle tank under standard fire test. International journal of hydrogen energy.DOI
16. Jinyang Zheng (2025). Introduction to the hydrogen industry special issue. Clean Energy.DOI
17. Zhen-Quan Zhang, Kai Ma, Le-Yao Li, Wenzhu Peng, Jinyang Zheng (2025). Study on the quenching strategies for seamless hydrogen storage vessels made of Cr–Mo steel. International journal of hydrogen energy.DOI
18. Jian-Feng Shi, Qi Chen, Sohail Yasin, Miaomiao Yang, Zhipeng Qi, Jinyang Zheng, Wenzhu Peng (2025). Impact of different metal supports on high-pressure hydrogen permeation measurement in rubber materials. Measurement.DOI
19. Jiangchuan Hu, Kai Ma, Zhen-Quan Zhang, Ruiming Zhang, Jinyang Zheng (2025). Machine learning-based prediction of hydrogen-assisted fatigue crack growth rate in Cr–Mo steel. International journal of hydrogen energy.DOI
20. Kai Ma, Ruiming Zhang, Chen Lu, Wenzhu Peng, Jinyang Zheng (2025). Phase field model for hydrogen-assisted fatigue crack growth considering dynamic hydrogen adsorption behavior. Theoretical and applied fracture mechanics (Print).DOI
21. Ye Zhang, Wanliang Zhang, Wanliang Zhang, Wanliang Zhang, Kaiyu Zhang, Kaiyu Zhang, Xin Liu, Zheye Liu, Zhiyuan Feng, Yuxiao, Chengshuang Zhou, Lin Zhang, Jinyang Zheng (2025). Crystallographic engineering of AlN films via N2/(Ar + N2) modulation: achieving hydrogen-resistant stability in high-pressure hydrogen systems. Materials Letters.DOI
22. Chengshuang Zhou, Changcheng Jiang, Huijie Chen, Yuchen Xie, Yin Lv, Yubin Shen, Kaiyu Zhang, Lin Zhang, Jinyang Zheng (2025). Effect of heat treatment temperature on the hydrogen barrier properties of oxide films on the surface of X52 pipeline steel. Corrosion Science.DOI
23. Wanliang Zhang, Jun Wang, Kaiyu Zhang, Ziyan Shen, Wenli Zhang, Ye Zhang, Zhitao Wu, Chengshuang Zhou, Zhang Lin, Jinyang Zheng (2025). Polycrystalline FeCrAl thin films used as high-pressure hydrogen environment strain gauges: Low zero-drift, creep, high sensitivity. International Journal of Hydrogen Energy.DOI
24. 宗鑫伟，施建峰，邓贵德，刘应华，程光旭，陈学东，范志超，徐双庆，贾国栋，郑津洋（2024）. 2024年ASME PVP会议简介. 《压力容器》.
25. 张盛，郑津洋，戴剑锋，王昕，李浩然（2024）. 可再生能源大规模制氢及储氢系统研究进展. 《太阳能学报》.
26. 叶盛，李克明，郑津洋，孙珊（2024）. 内压碟形封头屈曲压力计算新公式（英文）. Journal of Zhejiang University-Science A.
27. Sheng Zhang, Bo Li, Dongjie Xu, Jinyang Zheng (2024). Capacity optimization of a large-scale photovoltaic power generation system coupled with hydrogen production and storage based on economic analysis. Journal of Physics: Conference Series.DOI
28. Jinyang Zheng, Jiangchuan Hu, Kai Ma, Yiming Zhao, Ruiming Zhang, C. Gu, Zhengli Hua (2024). Study on low cycle fatigue properties of Cr-Mo steel in 50 MPa gaseous hydrogen. International journal of hydrogen energy.DOI
29. Li Yang, Guining Shao, Xinyu Zheng, Yansong Jia, Yanghong Xia, Yuhai Dou, Ming Yang Huang, Chaohua Gu, Jian-Feng Shi, Jinyang Zheng, Shi Xue Dou (2024). Cutting-edge advances in pressurized electrocatalytic reactors. eScience.DOI
30. Li Ma, Changcheng Liu, Jiulin Han, Ange Wen, Baoqing Liu, Jinyang Zheng (2024). Delamination defects in composite hydrogen storage cylinders: CT scanning and shearography measurement. International Journal of Hydrogen Energy.DOI
31. Chengshuang Zhou, Changcheng Jiang, Yan Jin, Hongbin Zhou, Qingxiong Qiu, Yuqing Hu, Yuchen Xie, Lin Zhang, Jinyang Zheng (2024). The regulation of dislocation and precipitated phase improving hydrogen embrittlement resistance of pipeline steel in high pressure hydrogen environment. International Journal of Fatigue.DOI
32. Tao Shen, Keming Li, Jinyang Zheng (2024). Method for Shape Imperfection Control in Buckling of Ellipsoidal Heads Using a 3D Laser Scanner.DOI
33. Li Ma, Kaidi Ying, Changcheng Liu, Ange Wen, Shoulong Wang, Baoqing Liu, Jinyang Zheng (2024). Experimental and numerical investigation of radial displacement of COPV using CT and FPP method. International Journal of Hydrogen Energy.DOI
34. 郑津洋，何云堂，侯永平，李翔，李涛，苏智阳（2023）. 《燃料电池电动汽车安全全球技术法规》二阶段解读——系列四：火烧试验. 《中国汽车(中英文对照)》.
35. 郑津洋，何云堂，魏蔚，侯永平，苏智阳（2023）. 《燃料电池电动汽车安全全球技术法规》二阶段解读——系列五:液氢储存系统. 《中国汽车(中英文对照)》.
36. 郑津洋，何云堂，侯永平，胡军，李翔，苏智阳（2023）. 《燃料电池电动汽车安全全球技术法规》二阶段解读——系列三:储氢系统. 《中国汽车(中英文对照)》.
37. 郑津洋，何云堂，侯永平，邢晓明，苏智阳（2023）. 《燃料电池电动汽车安全全球技术法规》二阶段解读——系列二:碰撞安全. 《中国汽车(中英文对照)》.
38. 郑津洋，何云堂，侯永平，李普明，孙北，苏智阳（2023）. 《燃料电池电动汽车安全全球技术法规》二阶段解读——系列一：整体情况. 《中国汽车(中英文对照)》.
39. Ruiming Zhang, Kai Ma, Wenzhu Peng, Jinyang Zheng (2023). Effects of hydrogen pressure on hydrogen-assisted fatigue crack growth of Cr-Mo steel. Theoretical and applied fracture mechanics (Print).DOI
40. Yifan Li, Qinan Li, Wenzhu Peng, Zheng-Li Hua, Jinyang Zheng (2023). A comparative analysis of the regulations, codes and standards for on-board high-pressure hydrogen storage cylinders. International journal of hydrogen energy.DOI
41. Ruiming Zhang, Chen Lu, Kai Ma, Wenzhu Peng, Jinyang Zheng (2023). Modelling of hydrogen distribution at the fatigue crack tip of austenitic stainless steels in internal and external hydrogen tests. International journal of hydrogen energy.DOI
42. Chen Lu, Ruiming Zhang, Jinyang Zheng, Kai Ma, Qinan Li (2023). Numerical study on the effects of rupture disk opening manner on high-pressure hydrogen release and spontaneous ignition. International journal of hydrogen energy.DOI
43. Juan Shang, Zhengli Hua, Baihui Xing, Haotian Wei, Jinyang Zheng (2023). Enhanced hydrogen embrittlement of steel by the premature hydrogen dissociation with the increasing inert gas pressure in hydrogen-containing mixtures. Acta Materialia.DOI
44. Danqing Ying, Kaiyu Zhang, Qihang Zhou, Hangli Qian, Yuhang Li, Chengshuang Zhou, Lin Zhang, Jinyang Zheng (2023). The oxygen-rich nanoparticles optimized by heat treatment enhance the corrosion resistance in selective laser melted 304L stainless steel. Materials Letters.DOI
45. Ange Wen, Li Ma, Jinyang Zheng (2023). A novel modeling and virtual testing method of hydrogen storage COPV considering stochastic wrinkle defects. International Journal of Hydrogen Energy.DOI
46. Chengshuang Zhou, Fangyue Wu, Dan Tang, Zebing Zhang, Lin Zhang, Lin Zhang, Jinyang Zheng (2023). Effect of subcritical-temperature heat treatment on corrosion of SLM SS316L with different process parameters. Corrosion Science.DOI
47. 杜忠明，郑津洋，戴剑锋，施建峰，花争立，李博，张彤枫，侯孟婧（2022）. 我国绿氢供应体系建设思考与建议. 《中国工程科学》, Vol. 24, No. 6.下载原文
48. 郑津洋，马凯，叶盛，顾超华，花争立，彭文珠（2022）. 我国氢能高压储运设备发展现状及挑战. 《压力容器》.
49. 申川川，马利，文安戈，郭静，郑津洋（2022）. 纤维增强树脂复合材料中的褶皱缺陷：分散性与虚拟测试. 《复合材料学报》.
50. 马利，文安戈，申川川，郭静，郑津洋（2022）. 纤维增强树脂复合材料中的褶皱缺陷：微应力无损检测. 《复合材料学报》.
51. 李逸凡，李奇楠，杨苗苗，郑津洋，花争立（2022）. 氢燃料电池汽车全球技术法规第二阶段火烧试验方法研究. 《太阳能学报》.
52. Chengshuang Zhou, Dan Tang, Kaiyu Zhang, Fangyue Wu, Ping Lin, Yan Jin, Lin Zhang, Jinyang Zheng (2022). Effect of manganese content on the hydrogen embrittlement of twinning-induced plasticity (TWIP) steels under hydrogen charging and hydrogen environment. Materials Science and Engineering A.DOI
53. Yuanjian Hong, Chengshuang Zhou, Stefan Wagner, Sabine Schlabach, Astrid Pundt, Lin Zhang, Jinyang Zheng (2022). Strain-induced twins and martensite: Effects on hydrogen embrittlement of selective laser melted (SLM) 316 L stainless steel. Corrosion Science.DOI
54. Chengshuang Zhou, Yanmin He, Jiehao Jiang, Kaiyu Zhang, Dan Tang, Haohao Zhu, Juan Shang, Guomin Sun, Meng Wang, Lin Zhang, Min Wu, Jinyang Zheng (2022). Hydrogen uptake induced by CO2 enhances hydrogen embrittlement of iron in hydrogen blended natural gas. Corrosion Science.DOI
55. Haohao Zhu, Qiuli Pan, Kaiyu Zhang, Chengshuang Zhou, Wanliang Zhang, Yujie Yao, Danqing Ying, Yanmin He, Jinyang Zheng, Lin Zhang (2022). The difference in fatigue crack growth induced by internal and external hydrogen in selective laser melted 304L stainless steel. International Journal of Fatigue.DOI
56. 方海清，施建峰，郑津洋（2021）. 考虑声衰减和声频散的聚乙烯超声相控阵缺陷检测仿真模型. 《第十届全国压力容器学术会议》.DOI
57. 杜洋，郑津洋，马利（2021）. 内爆炸下管道裂纹渐进式动态扩展机制研究. 《压力容器先进技术——第十届全国压力容器学术会议论文集（上）》.DOI
58. 李克明，郑津洋，张泽坤，孙国有，顾超华（2021）. 内压椭圆形封头弹塑性设计方法. 《压力容器先进技术——第十届全国压力容器学术会议论文集（上）》.DOI
59. 郝春永，王栋亮，郑津洋，徐平，顾超华（2021）. 铝内胆复合材料储氢瓶爆破压力与疲劳寿命关系研究. 《工程设计学报》.
60. 尚娟，鲁仰辉，郑津洋，孙晨，花争立，于文涛，张一苇（2021）. 掺氢天然气管道输送研究进展和挑战. 《化工进展》.DOI
61. 施建峰，冯颖，陶杨吉，郑津洋，梁琳（2021）. 聚乙烯管道无损检测技术标准进展. 《压力容器》.
62. 郑津洋，王振宇，陆群杰，刘宝庆，李克明，吴英哲，徐平（2021）. 奥氏体不锈钢深冷容器疲劳设计曲线探讨. 《压力容器》.
63. 施建峰，胡安琪，郑津洋（2021）. 聚乙烯管材标准发展现状分析. 《中国塑料》.DOI
64. 刘建虎，李功洲，郑津洋，刘玉涛，何广利，周向荣，李磊祚，陈霖新（2021）. 加氢站等级划分原则的研究. 《煤气与热力》.DOI
65. 张雯丽，张万亮，李雨杭，周成双，张凯宇，郑津洋，张林（2021）. 高压氢环境专用薄膜应变片的设计制备及性能测试. 《传感技术学报》.
66. 吴英哲，赵钦宇，甘智华，郑津洋，顾超华，匡继勇，刘宝庆（2021）. 材料低温力学性能测试技术研究进展. 《低温工程》.
67. Haohao Zhu, Kaiyu Zhang, Wanliang Zhang, Yujie Yao, Danqing Ying, Chengshuang Zhou, Jinyang Zheng, Lin Zhang (2021). The evolution of oxygen-rich nanoparticle and its effect on the mechanical property in selective laser melted 304L stainless steel. Materials Science and Engineering A.DOI
68. Kai Ma, Wenzhu Peng, Jinyang Zheng, Chaohua Gu, Ruimin Zhang, Yayu Liu, Zhengli Hua (2021). Study on fracture strain of Cr–Mo steel in high pressure hydrogen. International Journal of Hydrogen Energy.DOI
69. Yuanjian Hong, Chengshuang Zhou, Yuanyuan Zheng, Lin Zhang, Jinyang Zheng (2021). The Room Temperature Creep of Selective Laser Melted 316L Stainless Steel Investigated by Nanoindentation. Journal of Materials Engineering and Performance.DOI
70. Zhitao Wu, Kaiyu Zhang, Chengshuang Zhou, Zhengrong Zhou, Wenli Zhang, Fan Bao, Jinyang Zheng, Lin Zhang (2021). Warm deformation enhances strength and inhibits hydrogen induced fatigue crack growth in metastable 304 and 316 austenitic stainless steels. Materials Science and Engineering A.DOI
71. Jun Liu, Huaqing Ma, Shuiying Zheng, Zhixin Zhang, Jinyang Zheng, Yongzhi Zhao (2021). Numerical investigation on temperature-rise of on-bus gaseous hydrogen storage cylinder with different thickness of liner and wrapping material. International Journal of Hydrogen Energy.DOI
72. Juan Shang, J.Z. Wang, W.F. Chen, Hanqing Wei, Jinyang Zheng, Zhengli Hua, L. Zhang, Chao Gu (2021). Different effects of pure hydrogen vs. hydrogen/natural gas mixture on fracture toughness degradation of two carbon steels. Materials Letters.DOI
73. Zhengrong Zhou, Kaiyu Zhang, Yuanjian Hong, Haohao Zhu, Wanliang Zhang, Yanmin He, Chengshuang Zhou, Jinyang Zheng, Lin Zhang (2021). The dependence of hydrogen embrittlement on hydrogen transport in selective laser melted 304L stainless steel. International Journal of Hydrogen Energy.DOI
74. Huimin Tao, Shasha Lv, Chengshuang Zhou, Kaiyu Zhang, Yuanjian Hong, Jinyang Zheng, Lin Zhang (2021). Microstructure Evolution and Corrosion Behavior of Deformed Austenitic Stainless Steel Manufactured by Selective Laser Melting. Journal of Materials Engineering and Performance.DOI
75. Qunjie Lu, Jinyang Zheng, Gai Huang, Yingzhe Wu, Huiming Ding, Yibo Wang (2021). Research on Light-Weighting Mechanism of Pressure Strengthening for Austenitic Stainless Steels Cryogenic Vessels. Journal of Pressure Vessel Technology.DOI
76. Dongliang Wang, Binbin Liao, Chunyong Hao, Ange Wen, Jinyang Zheng, Peng Jiang, Chaohua Gu, Ping Xu, Qianghua Huang (2021). Acoustic emission characteristics of used 70 MPa type IV hydrogen storage tanks during hydrostatic burst tests. International Journal of Hydrogen Energy.DOI
77. 施建峰，陶杨吉，安成名，方海清，郑津洋（2020）. 聚乙烯燃气管道超声相控阵检测工程应用案例分析. 《压力容器》.
78. 刘自亮，熊思江，郑津洋，张银广，花争立，顾超华（2020）. 氢气管道与天然气管道的对比分析. 《压力容器》.
79. 郑津洋，胡军，韩武林，花争立，叶盛（2020）. 中国氢能承压设备风险分析和对策的几点思考. 《压力容器》.
80. 刘自亮，熊思江，郑津洋，张银广，花争立，顾超华（2020）. 埋地输氢管道在走滑断层作用下的失效分析. 《压力容器》.
81. 郑津洋（2020）. 高安全低成本大容量高压储氢. 《浙江大学学报(工学版)》.
82. 王一博，丁会明，郑津洋，陆群杰，王振宇，徐平，陈志伟（2020）. 预应变亚稳态奥氏体不锈钢(S30408)深冷低周疲劳性能. 《浙江大学学报(工学版)》.
83. 郑津洋，刘自亮，花争立，顾超华，王赓，陈霖新，张一苇，朱盛依，韩武林（2020）. 氢安全研究现状及面临的挑战. 《安全与环境学报》.DOI
84. 胡安琪，于发，杨若冰，施建峰，崔莹，郑津洋（2020）. 核电厂聚乙烯管道设计方法及标准简介. 《中国塑料》.DOI
85. Qunjie Lu, Jinyang Zheng, Gai Huang, Keming Li, Huiming Ding, Zhenyu Wang, Shaoan Cheng (2020). Enhancing combined cryogenic mechanical properties of metastable austenitic stainless steel by warm forming. Journal of Materials Processing Technology.DOI
86. Huimin Tao, Chengshuang Zhou, Yuanjian Hong, Kaiyu Zhang, Lin Zhang, Jinyang Zheng (2020). Abnormal Evolution of Pitting Behavior of Warmly Pre-Strained Austenitic Stainless Steels. Journal of Materials Engineering and Performance.DOI
87. Jinyang Zheng, Ya Dong Hu (2020). INVESTIGATION OF BURST FAILURE OF A THICK-WALLED SPHERICAL VESSEL WITH PLASTIC ORTHOTROPY UNDER INTERNAL AND EXTERNAL PRESSURES. Journal of Applied Mechanics and Technical Physics.DOI
88. Yue Zhang, Jianfeng Shi, Jinyang Zheng (2020). A method of fracture toughness JIC measurement based on digital image correlation and acoustic emission technique. Materials & Design.DOI
89. Chengshuang Zhou, Jing Wang, Shiyin Hu, Huimin Tao, Bei Fang, Li Long, Jinyang Zheng, Lin Zhang (2020). Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel After Heat Treatment. Journal of The Electrochemical Society.DOI
90. Yuanjian Hong, Chengshuang Zhou, Yuanyuan Zheng, Lin Zhang, Jinyang Zheng (2020). The cellular boundary with high density of dislocations governed the strengthening mechanism in selective laser melted 316L stainless steel. Materials Science and Engineering A.DOI
91. Jinyang Zheng, Zekun Zhang, Keming Li, Yehong Yu, Chaohua Gu (2020). A simple formula for prediction of plastic collapse pressure of steel ellipsoidal heads under internal pressure. Thin-Walled Structures.DOI
92. Juan Shang, Weifeng Chen, Jinyang Zheng, Zhengli Hua, Lin Zhang, Chengshuang Zhou, Chaohua Gu (2020). Enhanced hydrogen embrittlement of low-carbon steel to natural gas/hydrogen mixtures. Scripta Materialia.DOI
93. Jianjun Ye, Zhenhua Zhao, Jinyang Zheng, Shehab Salem, Jiangcun Yu, Junxu Cui, Xiaoyi Jiao (2020). Transient Flow Characteristic of High-Pressure Hydrogen Gas in Check Valve during the Opening Process. Energies.DOI
94. Jinyang Zheng, Yehong Yu, Yehong Chen, Keming Li, Zekun Zhang, Wenzhu Peng, Chaohua Gu, Ping Xu (2020). Comparison of Ellipsoidal and Equivalent Torispherical Heads Under Internal Pressure: Buckling, Plastic Collapse and Design Rules. Journal of Pressure Vessel Technology.DOI
95. Jianfeng Shi, Yangji Tao, Weican Guo, Jinyang Zheng (2020). CNN Based Defect Recognition Model for Phased Array Ultrasonic Testing Images of Electrofusion Joints.DOI
96. Keming Li, Jinyang Zheng, Zekun Zhang, Chaohua Gu, Ping Xu (2020). A New Method for Preventing Plastic Collapse of Ellipsoidal Head Under Internal Pressure. Volume 1: Codes and Standards.DOI
97. Huimin Tao, Chengshuang Zhou, Yuanjian Hong, Yuanyuan Zheng, Kaiyu Zhang, Jinyang Zheng, Lin Zhang (2020). Influence of Warm Predeformation Temperature on the Corrosion Property of Type 304 Austenitic Stainless Steel. Journal of Materials Engineering and Performance.DOI
98. Yuanyuan Zheng, Ping Yu, Kaiyu Zhang, Mao Wen, Jinyang Zheng, Chengshuang Zhou, Lin Zhang (2020). Coupling effect of grain boundary and hydrogen segregation on dislocation nucleation in bi-crystal nickel. International Journal of Hydrogen Energy.DOI
99. Kai Ma, Jinyang Zheng, Zhengli Hua, Chaohua Gu, Ruiming Zhang, Yayu Liu (2020). Hydrogen assisted fatigue life of Cr–Mo steel pressure vessel with coplanar cracks based on fatigue crack growth analysis. International Journal of Hydrogen Energy.DOI
100. Yang Du, Fan Zhou, Wei Hu, Libo Zheng, Li Ma, Jinyang Zheng (2020). Incremental dynamic crack propagation of pipe subjected to internal gaseous detonation. International Journal of Impact Engineering.DOI
101. Zhitao Wu, Kaiyu Zhang, Yuanjian Hong, Chengshuang Zhou, Jinyang Zheng, Lin Zhang (2020). The dependence of fatigue crack growth on hydrogen in warm-rolled 316 austenitic stainless steel. International Journal of Hydrogen Energy.DOI
102. Juan Shang, Jinyang Zheng, Zhengli Hua, Yanhua Li, Chaohua Gu, Tiancheng Cui, Bo Meng (2020). Effects of stress concentration on the mechanical properties of X70 in high-pressure hydrogen-containing gas mixtures. International Journal of Hydrogen Energy.DOI
103. Chengshuang Zhou, Bei Fang, Jing Wang, Shiyin Hu, Baoguo Ye, Yanming He, Jinyang Zheng, Lin Zhang (2020). Effect of interaction between corrosion film and H 2 S/CO 2 partial pressure ratio on the hydrogen permeation in X80 pipeline steel. Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control.DOI
104. Yang Du, Fan Zhou, Libo Zheng, Wei Hu, Binbin Liao, Li Ma, Jinyang Zheng (2020). Comparison of mode-Ⅰ crack propagation of tube subjected to internal hydrogen static and detonation loading. International Journal of Hydrogen Energy.DOI
105. Huiming Ding, Yingzhe Wu, Qunjie Lu, Jinyang Zheng (2020). A method for calculating low-temperature stress-strain curves of austenitic stainless steels. Cryogenics.DOI
106. Gai Huang, Jinyang Zheng, Bo Meng, Zhengli Hua, Qunjie Lu, Xiongying Li, Ping Xu (2020). Mechanical Properties of X70 Welded Joint in High-Pressure Natural Gas/Hydrogen Mixtures. Journal of Materials Engineering and Performance.DOI
107. 胡安琪，聂新宇，姚登樽，陈贤朋，郑津洋，施建峰（2019）. 聚乙烯燃气管道电熔接头熔区应力分析. 《压力容器》.
108. 陈志伟，李涛，杨国义，郑津洋（2019）. GB/T 34019—2017《超高压容器》标准分析. 《压力容器》.
109. 周成双，张林，郑津洋（2019）. 预应变对亚稳奥氏体不锈钢的氢脆行为的影响. 《第十届全国腐蚀大会摘要集》.DOI
110. 顾超华，朱盛依，郑津洋，李炎华，张林，骆承法，花争立（2019）. 基于扫描开尔文探针力显微镜的金属中局部氢分布测试方法研究. 《表面技术》.DOI
111. 廖斌斌，周建武，林渊，贾利勇，王栋亮，花争立，郑津洋，顾超华（2019）. CFRP层合板低速冲击响应及损伤特性研究. 《高压物理学报》.
112. Chengshuang Zhou, Shiyin Hu, Qiaoying Shi, Huimin Tao, Yangyang Song, Jinyang Zheng, Peng Xu, Lin Zhang (2019). Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing. Corrosion Science.DOI
113. Yuanyuan Zheng, Lin Zhang, Qiaoying Shi, Chengshuang Zhou, Jinyang Zheng (2019). Effects of hydrogen on the mechanical response of X80 pipeline steel subject to high strain rate tensile tests. Fatigue & Fracture of Engineering Materials & Structures.DOI
114. Chuanchuan Shen, Li Ma, Ping Xu, Jinyang Zheng (2019). Virtual testing of mechanical response of composite plates with normally distributed wrinkles. Composite Structures.DOI
115. Chengshuang Zhou, Yangyang Song, Qiaoying Shi, Shiyin Hu, Jinyang Zheng, Peng Xu, Lin Zhang (2019). Effect of pre-strain on hydrogen embrittlement of metastable austenitic stainless steel under different hydrogen conditions. International Journal of Hydrogen Energy.DOI
116. Keyang Li, Jinyang Zheng, Z. Zhang, Chao Gu, Ping Xu, Z. Chen (2019). A new formula to predict buckling pressure of steel ellipsoidal head under internal pressure. Thin-Walled Structures.DOI
117. Shasha Lv, Huimin Tao, Yuanjian Hong, Yuanyuan Zheng, Chengshuang Zhou, Jinyang Zheng, Lin Zhang (2019). Surface treatment and corrosion behavior of 316L stainless steel fabricated by selective laser melting. Materials Research Express.DOI
118. Sheng Ye, Jinyang Zheng, Ting Yu, Chaohua Gu, Zhengli Hua (2019). Light Weight Design of Multi-Layered Steel Vessels for High-Pressure Hydrogen Storage.DOI
119. Jinyang Zheng, Keming Li, Yehong Yu, Zekun Zhang, Wenzhu Peng, Chaohua Gu, Ping Xu (2019). Comparison of Ellipsoidal and Equivalent Torispherical Heads Under Internal Pressure: Buckling, Plastic Collapse and Design Rules. Volume 1: Codes and Standards.DOI
120. Weican Guo, Yangji Tao, Jianfeng Shi, Cunjian Miao, Haijian Zhong, Jinyang Zheng (2019). Development of Chinese Standard on Ultrasonic Inspection for Electrofusion Joint of Polyethylene Pipe. Volume 1: Codes and Standards.DOI
121. Zhiwei Chen, Tao Li, Yang Guo-yi, Jinyang Zheng, Guide Deng (2019). Technical Progress in Chinese Standard of Ultra-High Pressure Vessels. Volume 1: Codes and Standards.DOI
122. Ke Bo, Jinyang Zheng, Chunlin Gu, Baodi Zhao, Qianghua Huang, Binbin Liao (2019). Experimental Studies on Discharge Characteristics of the Typical Thermally-Activated Pressure Relief Device Used for High-Pressure Hydrogen Storage Cylinder in Different Fire Conditions.DOI
123. Gai Huang, Jinyang Zheng, Zhengli Hua, Binbin Liao (2019). An Introduction to China National Standard for On-Board High-Pressure Hydrogen Storage Cylinders. Volume 1: Codes and Standards.DOI
124. Huiming Ding, Yingzhe Wu, Qunjie Lu, Yibo Wang, Jinyang Zheng, Ping Xu (2019). A modified stress-strain relation for austenitic stainless steels at cryogenic temperatures. Cryogenics.DOI
125. Jinyang Zheng, Qunjie Lu, Yingzhe Wu, Xiao jie Zhang, Huiming Ding, Peizi Hui, Qingqing Li (2019). Research on Forming Temperature of Metastable Austenitic Stainless Steel Head Based on Strain-Induced Martensitic Transformation. Journal of Pressure Vessel Technology.DOI
126. Dongliang Wang, Binbin Liao, Jinyang Zheng, Gai Huang, Zhengli Hua, Chaohua Gu, Ping Xu (2019). Development of regulations, codes and standards on composite tanks for on-board gaseous hydrogen storage. International Journal of Hydrogen Energy.DOI
127. Huimin Tao, Chengshuang Zhou, Yuanyuan Zheng, Yuanjian Hong, Jinyang Zheng, Lin Zhang (2019). Anomalous evolution of corrosion behaviour of warm-rolled type 304 austenitic stainless steel. Corrosion Science.DOI
128. Yuanjian Hong, Chengshuang Zhou, Yuanyuan Zheng, Lin Zhang, Jinyang Zheng, Xingyang Chen (2019). Dependence of strain rate on hydrogen-induced hardening of austenitic stainless steel investigated by nanoindentation. International Journal of Hydrogen Energy.DOI
129. Binbin Liao, D.L. Wang, M. Hamdi, Jinyang Zheng, Peng Jiang, Chao Gu, Weirong Hong (2019). Acoustic emission-based damage characterization of 70 MPa type IV hydrogen composite pressure vessels during hydraulic tests. International Journal of Hydrogen Energy.DOI
130. Zhengli Hua, Shengyi Zhu, Juan Shang, Guangxu Cheng, Yanchen Yao, Jinyang Zheng (2019). Scanning Kelvin probe force microscopy study on hydrogen distribution in austenitic stainless steel after martensitic transformation. Materials Letters.DOI
131. Yuanjian Hong, Chengshuang Zhou, Yuanyuan Zheng, Jinyang Zheng, Lin Zhang, Xingyang Chen (2019). Hydrogen effect on nanoindentation creep of austenitic stainless steel: A comparative study between primary creep stage and steady-state creep stage. International Journal of Hydrogen Energy.DOI
132. 郑津洋，马凯，周伟明，胡军，顾超华，花争立（2018）. 加氢站用高压储氢容器. 《压力容器》.
133. 叶建军，郑津洋，丁会明，段鹏，刘文武（2018）. 基于互联网信息技术的深冷容器应变强化控制系统. 《压力容器》.
134. 丁会明，吴英哲，郑津洋，陈朝晖，尹立军（2018）. S30408焊接接头低温力学性能试验. 《浙江大学学报(工学版)》.
135. 秦胤康，施建峰，侯东圣，郑津洋，郭伟灿（2018）. 核电站用PE-HD管水压试验压力变化规律研究. 《中国塑料》.
136. Xingyang Chen, Linlin Ma, Chengshuang Zhou, Yuanjian Hong, Huimin Tao, Jinyang Zheng, Lin Zhang (2018). Improved resistance to hydrogen environment embrittlement of warm-deformed 304 austenitic stainless steel in high-pressure hydrogen atmosphere. Corrosion Science.DOI
137. Huimin Tao, Yuanjian Hong, Xingyang Chen, Chengshuang Zhou, Jinyang Zheng, Lin Zhang (2018). Hydrogen Effect on the Fatigue Crack Growth in Austenitic Stainless Steel Investigated by a New Method Based on Nanohardness Distribution. Journal of Materials Engineering and Performance.DOI
138. Yuanjian Hong, Chengshuang Zhou, Yuanyuan Zheng, Lin Zhang, Jinyang Zheng, Xingyang Chen (2018). Effect of hydrogen and strain rate on nanoindentation creep of austenitic stainless steel. International Journal of Hydrogen Energy.DOI
139. Zhengli Hua, Shengyi Zhu, Bai An, Takashi Iijima, Chaohua Gu, Jinyang Zheng (2018). The finding of hydrogen trapping at phase boundary in austenitic stainless steel by scanning Kelvin probe force microscopy. Scripta Materialia.DOI
140. Yuanjian Hong, Chengshuang Zhou, Yuanyuan Zheng, Lin Zhang, Jinyang Zheng, Xingyang Chen, Bai An (2018). Formation of strain-induced martensite in selective laser melting austenitic stainless steel. Materials Science and Engineering A.DOI
141. Yang Du, Fan Zhou, Li Ma, Jinyang Zheng, Changhang Xu, Guoming Chen (2018). Dynamic fracture response of pre-flawed elbow pipe subjected to internal hydrogen-oxygen detonation. International Journal of Hydrogen Energy.DOI
142. Wenmin Qu, Chaohua Gu, Jinyang Zheng, Yongzhi Zhao, Zhengli Hua (2018). Effect of plastic deformation at room temperature on hydrogen diffusion of S30408. International Journal of Hydrogen Energy.DOI
143. Linlin Ma, Chengshuang Zhou, Xingyang Chen, Yuanjian Hong, Jinyang Zheng, Lin Zhang (2018). Effect of nitrogen on nanomechanical behavior of austenitic stainless steel investigated by nanoindentation. Materials Research Express.DOI
144. Xuedong Chen, Zhichao Fan, Yongdong Chen, Xiaohu Zhang, Jun Cui, Jinyang Zheng, Binan Shou (2018). Development of Lightweight Design and Manufacture of Heavy-Duty Pressure Vessels in China.DOI
145. Yue Zhang, Jianfeng Shi, Jinyang Zheng (2018). Study of Mode I-II Mixed Crack Propagation in Electrofusion Joint of Polyethylene Pipe.DOI
146. Yingzhe Wu, Huaijian Xu, Qunjie Lu, Jinyang Zheng, Ping Xu (2018). Low-Cycled Fatigue Life of S30408 Stainless Steel at Liquid-Nitrogen Temperature.DOI
147. Qunjie Lu, Gai Huang, Yingzhe Wu, Huiming Ding, Jinyang Zheng (2018). Light-Weight Mechanism of Pressure Strengthening of Cryogenic Vessels From Austenitic Stainless Steel.DOI
148. Qi He, Zhengli Hua, Jinyang Zheng (2018). Study on Hydrogen Compatibility of S31603 Weld Joints in 98MPa Gaseous Hydrogen.DOI
149. Chuanchuan Shen, Li Ma, Gai Huang, Yingzhe Wu, Jinyang Zheng, Yan Liu, Jun Biao Hu (2018). Consequence assessment of high-pressure hydrogen storage tank rupture during fire test. Journal of Loss Prevention in the Process Industries.DOI
150. Jinyang Zheng, Yue Zhang, Dongsheng Hou, Yinkang Qin, Weican Guo, Chuck Zhang, Jianfeng Shi (2018). A review of nondestructive examination technology for polyethylene pipe in nuclear power plant. Frontiers of Mechanical Engineering.DOI
151. Yuanyuan Zheng, Chengshuang Zhou, Yuanjian Hong, Jinyang Zheng, Lin Zhang (2018). Evolution behavior of nanohardness after thermal-aging and hydrogen-charging on austenite and strain-induced martensite in pre-strained austenitic stainless steel. Materials Research Express.DOI
152. Huiming Ding, Yingzhe Wu, Qunjie Lu, Ping Xu, Jinyang Zheng, Lijun Wei (2018). Tensile properties and impact toughness of S30408 stainless steel and its welded joints at cryogenic temperatures. Cryogenics.DOI
153. Jinyang Zheng, Xiangyu Shu, Yingzhe Wu, Huaijian Xu, Qunjie Lu, Binbin Liao, Binfeng Zhang (2018). Investigation on the plastic deformation during the stamping of ellipsoidal heads for pressure vessels. Thin-Walled Structures.DOI
154. Xingyang Chen, Chengshuang Zhou, Jinyang Zheng, Lin Zhang (2018). Effects of α′ martensite and deformation twin on hydrogen-assisted fatigue crack growth in cold/warm-rolled type 304 stainless steel. International Journal of Hydrogen Energy.DOI
155. Jinyang Zheng, Keyang Li, Shengan Liu, Ge H, Zekun Zhang, Chao Gu, Haifeng Qian, Zhengli Hua (2018). Effect of shape imperfection on the buckling of large-scale thin-walled ellipsoidal head in steel nuclear containment. Thin-Walled Structures.DOI
156. 屈文敏，花争立，李雄鹰，顾超华，郑津洋，赵永志（2017）. 热脱附谱技术在储氢容器材料氢陷阱研究中的应用研究进展. 《化工进展》.DOI
157. 廖斌斌，郑津洋，顾超华（2017）. 基于多尺度模型的复合材料气瓶低速冲击渐进失效分析方法. 《第九届全国压力容器学术会议》.
158. 江城伟，郑津洋，惠培子（2017）. 基于三维激光扫描的应变强化压力容器形状变化试验研究. 《第九届全国压力容器学术会议》.
159. 侯东圣，秦胤康，郑津洋（2017）. 核电聚乙烯管电熔接头相控阵超声检测声场的数值模拟. 《第九届全国压力容器学术会议》.
160. 张泽坤，惠培子，郑津洋（2017）. 应变强化圆筒容器外压屈曲试验研究. 《第九届全国压力容器学术会议》.
161. 张捷，聂新宇，徐平，侯东圣，施建峰，郑津洋（2017）. 模拟海洋复杂载荷条件复合管道性能测试装备. 《压力容器》.
162. 聂新宇，鲁顺利，施建峰，郑津洋（2017）. 聚乙烯管接头特征线弹性模量的微米压痕表征. 《压力容器》.
163. 马利，申川川，张安达，郑津洋（2017）. 纤维增强复合材料结构动力响应的虚拟测试方法. 《第三届中国国际复合材料科技大会摘要集-分会场31-35》.
164. 张帆，郑津洋，马利（2017）. 内压作用下的航空轮胎爆破碎片动力响应. 《航空学报》.
165. 杜洋，马利，郑津洋，张帆，张安达（2017）. 考虑流固耦合的管道爆炸后果预测与分析. 《浙江大学学报(工学版)》.
166. 王赓，郑津洋，蒋利军，陈健，韩武林，陈霖新（2017）. 中国氢能发展的思考. 《科技导报》.
167. 郑津洋，崔天成，顾超华，张鑫，付海龙（2017）. 高压氢气对6061铝合金力学性能的影响. 《高压物理学报》.
168. Xingyang Chen, Chengshuang Zhou, Xiao Hui Cai, Jinyang Zheng, Lin Zhang (2017). Effects of External Hydrogen on Hydrogen Transportation and Distribution Around the Fatigue Crack Tip in Type 304 Stainless Steel. Journal of Materials Engineering and Performance.DOI
169. Bai An, Zhengli Hua, Takashi Iijima, Chaohua Gu, Jinyang Zheng, Christopher W. San Marchi (2017). Scanning Kelvin Probe Force Microscopy Study of Hydrogen Distribution and Evolution in Duplex Stainless Steel.DOI
170. Xiongying Li, Tiancheng Cui, Yongzhi Zhao, Jinyang Zheng, Ping Xu (2017). Penetration of Hydrogen Into Alpha-Fe: A Molecular Dynamics Study.DOI
171. Chilou Zhou, Jinyang Zheng, Chaohua Gu, Yongzhi Zhao, Pengfei Liu (2017). Sealing performance analysis of rubber O-ring in high-pressure gaseous hydrogen based on finite element method. International Journal of Hydrogen Energy.DOI
172. Zhengli Hua, Xin Zhang, Jinyang Zheng, Chaohua Gu, Tiancheng Cui, Yongzhi Zhao, Wenzhu Peng (2017). Hydrogen-enhanced fatigue life analysis of Cr–Mo steel high-pressure vessels. International Journal of Hydrogen Energy.DOI
173. Miguel J. Maes, Larry Starritt, Jinyang Zheng, Kesheng Ou, Jay O. Keller (2017). IPHE regulations codes and standards working group – Type IV COPV round robin testing. International Journal of Hydrogen Energy.DOI
174. Yuanjian Hong, Chengshuang Zhou, Yuanyuan Zheng, Lin Zhang, Jinyang Zheng, Bai An, Xingyang Chen, Xuehan Wang (2017). Hydrogen effect on the deformation evolution process in situ detected by nanoindentation continuous stiffness measurement. Materials Characterization.DOI
175. Zhengli Hua, Bai An, Takashi Iijima, Chaohua Gu, Jinyang Zheng (2017). The finding of crystallographic orientation dependence of hydrogen diffusion in austenitic stainless steel by scanning Kelvin probe force microscopy. Scripta Materialia.DOI
176. 赵永志，张鑫，郑津洋，顾超华，张林（2016）. 掺氢天然气管道输送安全技术. 《化工机械》.
177. 黄其忠，郑津洋，胡军，任明法，张靖（2016）. 复合材料气瓶的多轴疲劳寿命预测研究. 《复合材料科学与工程》.
178. 韩勇，陈兴阳，周成双，郑津洋，赵永志，张林，张凤华（2016）. 极端临氢环境金属材料力学性能数据库开发及应用. 《科技导报》.
179. 马利，郑津洋（2016）. 大型抗爆装备的极限载荷分析方法. 《第十八届全国疲劳与断裂学术会议》.
180. 张小平，李克明，顾超华，孙国有，郑津洋（2016）. 水压下大应变测试密封技术研究. 《轻工机械》.
181. 惠培子，王珂，郑津洋，顾小东，叶勇（2016）. S30408标准椭圆形封头冷冲压塑性变形分布预测. 《轻工机械》.
182. T. C. Cui, Pengfei Liu, Jinyang Zheng, Chao Gu (2016). Finite Element Analysis of Hydrogen Transport in Steel Pressure Vessel at High Temperature. Journal of Failure Analysis and Prevention.DOI
183. Yang Du, Fan Zhang, Anda Zhang, Li Ma, Jinyang Zheng (2016). Consequences assessment of explosions in pipes using coupled FEM-SPH method. Journal of Loss Prevention in the Process Industries.DOI
184. Keming Li, Jinyang Zheng, Zekun Zhang (2016). Experimental Investigation on Buckling of Steel Nuclear Containment With Elliptical Head.DOI
185. Jinyang Zheng, Qi Chang He, Chaohua Gu, Yongzhi Zhao, Zhengli Hua, Keming Li, Chilou Zhou, Sijia Zhong, Chunhua Wei, Yimin Zhang (2016). High Pressure 98 MPa Multifunctional Steel Layered Vessels for Stationary Hydrogen Storage.DOI
186. Lin Zhang, Jinyang Zheng, Bai An, Chengshuang Zhou (2016). Hydrogen Desorption From 6061 Aluminum Alloy During Deformation Detected by a New Apparatus.DOI
187. Chengshuang Zhou, Yuanjian Hong, Lin Zhang, Bai An, Jinyang Zheng, Xingyang Chen (2016). Abnormal effect of nitrogen on hydrogen gas embrittlement of austenitic stainless steels at low temperatures. International Journal of Hydrogen Energy.DOI
188. Bo Meng, Chaohua Gu, Lin Zhang, Chengshuang Zhou, Xiongying Li, Yongzhi Zhao, Jinyang Zheng, Xingyang Chen, Yong Kui Han (2016). Hydrogen effects on X80 pipeline steel in high-pressure natural gas/hydrogen mixtures. International Journal of Hydrogen Energy.DOI
189. Jinxing Guo, Lijing Xing, Zhengli Hua, Chaohua Gu, Jinyang Zheng (2016). Optimization of compressed hydrogen gas cycling test system based on multi-stage storage and self-pressurized method. International Journal of Hydrogen Energy.DOI
190. Yang Du, Li Ma, Jinyang Zheng, Fan Zhang, Anda Zhang (2016). Numerical prediction on dynamic fracture of tubes subjected to internal gaseous detonation. Engineering Failure Analysis.DOI
191. Chengshuang Zhou, Qiuyan Huang, Qiang Guo, Jinyang Zheng, Xingyang Chen, Jun Zhu, Lin Zhang (2016). Sulphide stress cracking behaviour of the dissimilar metal welded joint of X60 pipeline steel and Inconel 625 alloy. Corrosion Science.DOI
192. T. C. Cui, Pengfei Liu, Jinyang Zheng, Chao Gu (2016). Finite Element Analysis of Hydrogen Transport in Steel Pressure Vessel at Room Temperature. Journal of Failure Analysis and Prevention.DOI
193. Xingyang Chen, Chengshuang Zhou, Bai An, Jinyang Zheng, Lin Zhang (2016). An apparatus for detecting hydrogen desorption from metals during deformation. Vacuum.DOI
194. Jinyang Zheng, Xin Zhang, Ping Xu, Chaohua Gu, Bing Wu, Yongping Hou (2016). Standardized equation for hydrogen gas compressibility factor for fuel consumption applications. International Journal of Hydrogen Energy.DOI
195. 张俊峰，欧可升，郑津洋，赵永志，陈霖新，王赓（2015）. 我国首部氢系统安全国家标准简介. 《化工机械》.
196. 赵永志，蒙波，陈霖新，王赓，郑津洋，顾超华，张鑫，张俊峰（2015）. 氢能源的利用现状分析. 《化工进展》.
197. 陈希，郑津洋，缪存坚，高晓哲，惠培子，丁会明（2015）. 应变强化后容器的外压屈曲分析. 《压力容器》.
198. 李青青，缪存坚，晓风清，张潇，郑津洋（2015）. 奥氏体不锈钢压力容器应变强化若干问题探讨. 《中国特种设备安全》.
199. 李静媛，赵永志，郑津洋（2015）. 加氢站高压氢气泄漏爆炸事故模拟及分析. 《浙江大学学报(工学版)》.
200. 郑津洋（2015）. 过程设备设计. 《化学工业出版社》.
201. 郑津洋，周池楼，顾超华，李智远，赵永志，徐平，张林，刘鹏飞（2015）. 高压氢气环境材料耐久性试验装置的研究. 《太阳能学报》.
202. 李青青，郑津洋，张潇，缪存坚，高晓哲，马利（2015）. 应变强化奥氏体不锈钢液态二氧化碳储罐强度裕度研究. 《轻工机械》.
203. Dongsheng Hou, Weican Guo, Jinyang Zheng (2015). A Method of Automatic Defect Recognition for Phased Array Ultrasonic Inspection of Polythene Electro-Fusion Joints.DOI
204. Xiaoming Miao, Jianfeng Shi, Jinyang Zheng (2015). A Method of Ultrasonic Phased Array Inspection of Middle-High Pressure Plastic Pipe Reinforced by Cross Helically Wound Steel Wires Electro-Fusion Joint.DOI
205. Terry A. Johnson, Radoslav Bozinoski, Jianjun Ye, George B. Sartor, Jinyang Zheng, Jian Yang (2015). Thermal model development and validation for rapid filling of high pressure hydrogen tanks. International Journal of Hydrogen Energy.DOI
206. Kesheng Ou, Jinyang Zheng, Wulie Luo, X.F. Li, He Song Hu, Jingbiao Yang, Jinyang Zheng (2015). Heat and Mechanical Response Analysis of Composite Compressed Natural Gas Cylinders at Vehicle Fire Scenario. Procedia Engineering.DOI
207. 施建峰，钱海洋，范志超，郑津洋（2014）. 2014年ASME PVP会议简介. 《压力容器》.
208. 侯东圣，郑津洋，施建峰，郭伟灿，苗晓明（2014）. 核电站用HDPE管电熔接头的超声检测技术介绍. 《压力容器的创新设计——第九届全国压力容器设计学术会议暨第八届压力容器分会设计委员会委员会议论文集》.
209. 李涛，陈志伟，张涛，郑津洋，寿比南，杨国义（2014）. 基于失效模式的超高压容器设计方法介绍. 《压力容器的创新设计——第九届全国压力容器设计学术会议暨第八届压力容器分会设计委员会委员会议论文集》.
210. 叶建军，郑津洋，张潇，缪存坚，段鹏（2014）. 多任务深冷容器应变强化控制系统研制. 《压力容器的创新设计——第九届全国压力容器设计学术会议暨第八届压力容器分会设计委员会委员会议论文集》.
211. 郑津洋，李静媛，黄强华，欧可升，赵永志，刘鹏飞（2014）. 车用高压燃料气瓶技术发展趋势和我国面临的挑战. 《压力容器》.
212. 郑津洋，王珂，黄泽，缪存坚，马利，顾超华，徐平（2014）. 液氮温度下奥氏体不锈钢强度试验研究. 《压力容器》.
213. 刘威，李涛，郑津洋，陈志伟，杨国义，寿比南，郭伟灿（2014）. 超高压容器规范标准最新进展. 《压力容器》.
214. 张颖，高晓哲，张滨，宋竹满，郑津洋，张广平（2014）. 变形温度对应变强化深冷容器用S30408不锈钢组织结构演化的影响. 《材料研究学报》.
215. 欧可升，郑津洋，花争立，毛宗强（2014）. 国际氢安全领域研究热点及最新进展——记第五届国际氢安全会议(ICHS 2013). 《中外能源》.
216. 郑津洋，鲁顺利，马津津，施建峰（2014）. 占压下埋地聚乙烯管力学响应的数值模拟. 《中国塑料》.
217. 孙晓燕，郑津洋，Dryver R.Huston，秦权，王海龙（2014）. 损伤识别在车用储氢容器模态试验中的应用. 《振动、测试与诊断》.
218. 郑津洋，欧可升，花争立，徐平，何云堂，赵永志，胡军，韩冰（2014）. 车用高压储氢气瓶局部火烧试验方法研究. 《太阳能学报》.
219. Weican Guo, Jianfeng Shi, Jinyang Zheng, Zhongqiang Liu (2014). Research on Ultrasonic Testing for Electro-Fusion Joint of Reinforced Thermoplastic Pipes.DOI
220. Shuqi Zheng, Chengshuang Zhou, Xingyang Chen, Lin Zhang, Jinyang Zheng, Yongzhi Zhao (2014). Dependence of the abnormal protective property on the corrosion product film formed on H2S-adjacent API-X52 pipeline steel. International Journal of Hydrogen Energy.DOI
221. Lin Zhang, Zhiyuan Li, Jinyang Zheng, Yongzhi Zhao, Ping Xu, Chilou Zhou, Chengshuang Zhou, Xingyang Chen (2014). Dependence of hydrogen embrittlement on hydrogen in the surface layer in type 304 stainless steel. International Journal of Hydrogen Energy.DOI
222. Jinyang Zheng, Lei Zhao, Kesheng Ou, Jinxing Guo, Ping Xu, Yongzhi Zhao, Lin Zhang (2014). Queuing-based approach for optimal dispenser allocation to hydrogen refueling stations. International Journal of Hydrogen Energy.DOI
223. Jinxing Guo, Jian Yang, Yongzhi Zhao, Xiangmin Pan, Li‐Fang Zhang, Lei Zhao, Jinyang Zheng (2014). Investigations on temperature variation within a type III cylinder during the hydrogen gas cycling test. International Journal of Hydrogen Energy.DOI
224. 盛水平，韩树新，郑津洋，李伟忠，毛黎辉，周宁，刘延雷，陈海云，唐晓晖（2013）. 两种常用铝制压力容器强度安全裕度研究. 《压力容器》.
225. 晓风清，缪存坚，郑津洋（2013）. 奥氏体不锈钢制深冷容器应变强化过程蠕变规律研究. 《压力容器先进技术——第八届全国压力容器学术会议论文集》.
226. 郑津洋，赵永志，刘鹏飞，马利，施建峰，缪存坚（2013）. 压力容器面临的机遇和发展趋势. 《压力容器先进技术——第八届全国压力容器学术会议论文集》.
227. 辛健，马利，胡洋，郑津洋，杨健（2013）. 内爆载荷作用下不锈钢圆柱壳的断裂失效分析. 《压力容器》.
228. 郑津洋，高晓哲，寿比南，周伟明，陈朝晖，缪存坚，黄泽，马利，朱晓波（2013）. 奥氏体不锈钢制深冷容器室温应变强化技术常见问题探讨. 《压力容器》.
229. 黄泽，缪存坚，李涛，高晓哲，朱晓波，郑津洋，马利（2013）. 预拉伸奥氏体不锈钢常温拉伸力学性能试验研究. 《压力容器》.
230. 施建峰，郭伟灿，师俊，钟思嘉，郑津洋（2013）. 聚乙烯及其复合管道安全检测与评价方法. 《化工学报》.
231. 郑津洋，周池楼，徐平，花争立，赵永志，李智远，刘贤信，张林（2013）. 高压氢环境材料耐久性测试装置的研究进展. 《太阳能学报》.
232. 郑津洋，黄泽，缪存坚，高晓哲，朱晓波，舒翔宇，晓风清，马利（2013）. 不同控制模式对单轴拉伸试验结果的影响. 《浙江大学学报(工学版)》.
233. 赵永志，花争立，欧可升，周池楼，郑津洋（2013）. 车载低温高压复合储氢技术研究现状与挑战. 《太阳能学报》.
234. Xiangyu Shu, Jinyang Zheng, Binan Shou (2013). Experimental Investigation on Minimum Design Metal Temperature of Q345R Steel.DOI
235. Jinyang Zheng, Dongsheng Hou, Jun Feng Shi, Shunli Lu, Jianfeng Shi, Ping Xu (2013). A New Method for Measuring the Bond Strength of Electrofusion Joint.DOI
236. Jinyang Zheng, Jinxing Guo, Jian Yang, Yongzhi Zhao, Lei Zhao, Xiangmin Pan, Jianxin Ma, Lifang Zhang (2013). Experimental and numerical study on temperature rise within a 70 MPa type III cylinder during fast refueling. International Journal of Hydrogen Energy.DOI
237. Jinyang Zheng, Kesheng Ou, Zhengli Hua, Yongzhi Zhao, Ping Xu, Jun Liang Hu, Bing Han (2013). Experimental and numerical investigation of localized fire test for high-pressure hydrogen storage tanks. International Journal of Hydrogen Energy.DOI
238. Wenkai Wang, S. Zhang, Yang Jian-guo, Jinyang Zheng, Xianting Ding, M. Chou, P. Tang, Xuehua Zhan (2013). Effects of Distribution Channel Dimensions on Flow Distribution and Pressure Drop in a Plate‐Fin Heat Exchanger. Chemical Engineering & Technology.DOI
239. Lin Zhang, Zhiyuan Li, Jinyang Zheng, Yongzhi Zhao, Ping Xu, Chilou Zhou, Xiao Li (2013). Effect of strain-induced martensite on hydrogen embrittlement of austenitic stainless steels investigated by combined tension and hydrogen release methods. International Journal of Hydrogen Energy.DOI
240. Lin Zhang, Zhiyuan Li, Jinyang Zheng, Yongzhi Zhao, Ping Xu, Xianxin Liu, Chilou Zhou, Xiao Li (2013). Influence of low temperature prestrain on hydrogen gas embrittlement of metastable austenitic stainless steels. International Journal of Hydrogen Energy.DOI
241. Cunjian Miao, Jinyang Zheng, Xiaozhe Gao, Ze Huang, Abin Guo, Duyi Ye, Li Ma (2013). Investigation of low-cycle fatigue behavior of austenitic stainless steel for cold-stretched pressure vessels. Journal of Zhejiang University. Science A.DOI
242. 朱晓波，缪存坚，黄泽，高晓哲，郭阿宾，郑津洋（2012）. 应变强化奥氏体不锈钢弯曲压头直径研究. 《压力容器》.
243. 黄泽，郑津洋，刘鹏飞，缪存坚，施建峰（2012）. 内压圆筒厚度计算公式分析讨论. 《压力容器》.
244. 唐晓晖，郑津洋，施建峰（2012）. 欧盟简单压力容器指令最新动向. 《压力容器》.
245. 刘延雷，郑津洋，韦新华，韩树新，赵永志（2012）. 复合材料氢气瓶快充过程温升控制方法研究. 《太阳能学报》.
246. 刘岩，郑津洋，胡军（2012）. 车载高压氢瓶火烧试验及不同充装介质数值比较研究. 《高校化学工程学报》.
247. 何云堂，郑津洋，欧可升（2012）. 联合国氢燃料电池汽车全球技术法规(英文). China Standardization.
248. 舒翔宇，郑津洋，寿比南，缪存坚，黄泽，郭阿宾（2012）. 应变强化奥氏体不锈钢焊接接头冲击试验研究. 《浙江大学学报(工学版)》.
249. 马利，胡洋，辛健，郑津洋，邓贵德，陈勇军（2012）. 圆柱形爆炸容器绝热剪切瞬态失效过程. 《爆炸与冲击》.
250. L. Zhang, Mao Wen, Zhiyang Li, Jinyang Zheng, X. X. Liu, Yongzhi Zhao, Chilou Zhou (2012). Materials Safety for Hydrogen Gas Embrittlement of Metals in High-Pressure Hydrogen Storage for Fuel Cell Vehicles. Volume 1: Codes and Standards.DOI
251. Sijia Zhong, Jianfeng Shi, Weican Guo, Jinyang Zheng (2012). Investigation on the Allowable Temperature During Electrofusion Welding of Polyethylene Pipe.DOI
252. Jinyang Zheng, Xianxin Liu, Ping Xu, Pengfei Liu, Chunhua Wei, Xiaoru Ye (2012). Stationary Flat Steel Ribbon Wound Vessels for Storage of High Pressure Hydrogen. Volume 1: Codes and Standards.DOI
253. Jianjun Ye, Jian Yang, Jinyang Zheng, Xianting Ding, Ieong Wong, Weizhong Li, Cong Chen (2012). Thermal transpiration effect on the mass transfer and flow behaviors of the pressure-driven hydrogen gas flow. International Journal of Hydrogen Energy.DOI
254. Jinyang Zheng, Kesheng Ou, Haiyan Bie, Ping Xu, Yongzhi Zhao, Xianxin Liu, Yuntang He (2012). Heat transfer analysis of high-pressure hydrogen storage tanks subjected to localized fire. International Journal of Hydrogen Energy.DOI
255. Pengfei Liu, J.K. Chu, Sijia Hou, Ping Xu, Jinyang Zheng (2012). Numerical simulation and optimal design for composite high-pressure hydrogen storage vessel: A review. Renewable and Sustainable Energy Reviews.DOI
256. 杨铁成，陈学东，郑津洋，陈志平（2011）. 2011年美国ASME压力容器与管道会议(PVP 2011)简介. 《压力容器》.
257. 刘延雷，郑津洋，韩树新，赵永志，刘格思（2011）. 天然气气瓶快充过程温升数值模拟研究. 《高校化学工程学报》.
258. Jianjun Ye, Jian Yang, Jinyang Zheng, Xianting Ding, Ieong Wong, Weizhong Li, Cong Chen (2011). A multi-scale flow analysis in hydrogen separation membranes using a coupled DSMC-SPH method. International Journal of Hydrogen Energy.DOI
259. Jinyang Zheng, Xianxin Liu, Ping Xu, Pengfei Liu, Yongzhi Zhao, Jian Yang (2011). Development of high pressure gaseous hydrogen storage technologies. International Journal of Hydrogen Energy.DOI
260. Cunjian Miao, Jinyang Zheng, Li Ma, Duyi Ye (2011). Investigation on Fatigue Properties of Cold Stretched Austenitic Stainless Steel. Volume 1: Codes and Standards.DOI
261. Jinyang Zheng, Abin Guo, Cunjian Miao, Ping Xu, Jian Hui Yang, Jianjun Ye, Li Ma, Linlin Wu, Guoyi Yang (2011). Cold Stretching of Cryogenic Pressure Vessels From Austenitic Stainless Steels. Volume 1: Codes and Standards.DOI
262. 郑津洋，郭阿宾，缪存坚，马利，吴琳琳（2010）. 奥氏体不锈钢深冷容器室温应变强化技术. 《压力容器》.
263. 马利，胡洋，郑津洋，邓贵德，陈勇军（2010）. 圆柱形爆炸容器在冲击载荷下的失效模式变迁. 《第七届全国压力容器设计学术会议暨第七届中国机械工程学会压力容器分会设计委员会委员会议》.
264. 周宁，郑津洋，盛水平，韩树新，陈海云，刘延雷，缪存坚（2010）. 铜制压力容器轻量化研究. 《压力容器》.
265. 郑津洋，郝宇杰，陈学东，陈志平，施建峰（2010）. 美国机械工程师协会2010年压力容器与管道会议简介. 《压力容器》.
266. 李翔，郑津洋，施建峰，秦永泉，王飞，郝宇杰，邵泰清，邵汉增，李广忠，何晓莲（2010）. 钢丝缠绕增强塑料复合管蠕变行为研究. 《压力容器》.
267. 郑津洋，施建峰，师俊，徐成，饶静（2010）. 聚乙烯管国家标准中关键测试指标有效性的讨论. 《压力容器设计技术研究——第七届全国压力容器设计学术会议暨第七届中国机械工程学会压力容器分会设计委员会委员会议论文集》.
268. 刘鹏飞，周池楼，储进科，郑津洋（2010）. 复合材料储氢容器渐进失效分析. 《压力容器设计技术研究——第七届全国压力容器设计学术会议暨第七届中国机械工程学会压力容器分会设计委员会委员会议论文集》.
269. 张伯君，郑津洋，马利，饶静（2010）. 大直径双锥密封结构设计. 《压力容器设计技术研究——第七届全国压力容器设计学术会议暨第七届中国机械工程学会压力容器分会设计委员会委员会议论文集》.
270. Lei Zhao, Yanlei Liu, Jian Yang, Yongzhi Zhao, Jinyang Zheng, Haiyan Bie, Xianxin Liu (2010). Numerical simulation of temperature rise within hydrogen vehicle cylinder during refueling. International Journal of Hydrogen Energy.DOI
271. Xiuyang Li, Jinyang Zheng, Jianfeng Shi, Yi-Di Li, Ping Xu (2010). Experimental Investigation on Buckling of Plastic Pipe Reinforced by Winding Steel Wires Under External Pressure. Journal of Thermoplastic Composite Materials.DOI
272. Pengfei Liu, Jinyang Zheng (2010). Finite Element Analysis of Tensile Behavior of Ductile Steel with Defects. Journal of Failure Analysis and Prevention.DOI
273. Cunjian Miao, Yaxian Li, Jinyang Zheng (2010). Effect of Strain Rate on the Deformation-Induced Martensite Transformation and Mechanical Behavior of Austenitic Stainless Steels for Cold Stretched Pressure Vessels. ASME Pressure Vessels and Piping Conference (PVP).DOI
274. Jinyang Zheng, Yongquan Qin, Jianfeng Shi, Weican Guo, Hui Wang, Fei Wang (2010). Classification of Defects in Fusion Joints of Polyethylene Pipes. ASME Pressure Vessels and Piping Conference (PVP).DOI
275. 郑津洋，缪存坚，寿比南（2009）. 轻型化——压力容器的发展方向. 《压力容器》.
276. 郑津洋，吴琳琳，寿比南，谢铁军，陈朝晖（2009）. 《固定式压力容器安全技术监察规程》压力容器分类. 《第七届全国压力容器学术会议》.
277. 施建峰，郑津洋，郭伟灿，李翔，秦永泉，王非（2009）. 聚乙烯管道电熔接头冷焊的判定方法. 《第七届全国压力容器学术会议》.
278. 郑津洋（2009）. 极端承压设备. 《压力容器先进技术——第七届全国压力容器学术会议论文集》.
279. 胡八一，周刚，郑津洋，谷岩，董奇（2009）. 爆炸容器研究及应用最新进展评述. 《压力容器先进技术——第七届全国压力容器学术会议论文集》.
280. 邓贵德，郑津洋，陈勇军，马利，赵隆茂，孙亮（2009）. 小倾角离散多层爆炸容器失效模式研究. 《压力容器先进技术——第七届全国压力容器学术会议论文集》.
281. 董奇，郑津洋，胡八一（2009）. 壳体中的轴对称模态和非轴对称模态. 《压力容器先进技术——第七届全国压力容器学术会议论文集》.
282. 刘贤信，郑津洋，徐平，魏春华，叶晓茹（2009）. 固定式高压储氢用钢带错绕式容器. 《压力容器先进技术——第七届全国压力容器学术会议论文集》.
283. 郭伟灿，郑津洋，丁守宝，施建峰，石平，秦永泉（2009）. 聚乙烯电熔接头表面不规则对超声相控阵检测的影响分析. 《压力容器》.
284. Pengfei Liu, Jinyang Zheng, B.J. Zhang, P. Shi (2009). Failure analysis of natural gas buried X65 steel pipeline under deflection load using finite element method. Materials & Design (1980-2015).DOI
285. Honggang Chen, Jinyang Zheng, Ping Xu, Lei Li, Yanlei Liu, Haiyan Bie (2009). Study on real-gas equations of high pressure hydrogen. International Journal of Hydrogen Energy.DOI
286. Jian Yang, Jianjun Ye, Jinyang Zheng, Ieong Wong, Yanbao Ma, Chik Lam, Shmuel Link (2009). Improving DSMC with New Pressure Boundary Conditions for Heat and Mass Transfer of Microchannel Flows. Nanoscale and Microscale Thermophysical Engineering.DOI
287. Jinyang Zheng, Jianjun Ye, Jian Yang, Ping Tang, Lei Zhao, Maradee Kern (2009). An optimized control method for a high utilization ratio and fast filling speed in hydrogen refueling stations. International Journal of Hydrogen Energy.DOI
288. Ping Xu, Jinyang Zheng, P. F. Liu (2009). Finite element analysis of burst pressure of composite hydrogen storage vessels. Materials & Design (1980-2015).DOI
289. Xiang Li, Jinyang Zheng, Fengjian Shi, Yongquan Qin, Ping Xu (2009). Buckling Analysis of Plastic Pipe Reinforced by Cross-Winding Steel Wire Under Bending.DOI
290. Jinyang Zheng, Honggang Chen, Ping Xu, Yongzhi Zhao, Lifang Zhang, Yanlei Liu (2009). Experimental Investigation on Flow Characteristics of Hydrogen in Pipelines. Volume 1: Codes and Standards.DOI
291. Shuiping Sheng, Shuxin Han, Jinyang Zheng, Yongjian Gao, Ning Zhou (2009). Non-Linear Numerical Analysis of Large-Sized Double-Cone Sealing Process. Volume 1: Codes and Standards.DOI
292. Jianfeng Shi, Jinyang Zheng, Weican Guo, Ping Xu, Yongquan Qin, Shangzhi Zuo (2009). A Model for Predicting Temperature of Electrofusion Joints for Polyethylene Pipes. Journal of Pressure Vessel Technology.DOI
293. P. Tang, Jian Yang, Jinyang Zheng, C. K. Lam, Ieong Wong, S. Z. He (2009). Predicting Erosion-Corrosion Induced by the Interactions Between Multiphase Flow and Structure in Piping System. Journal of Pressure Vessel Technology.DOI
294. 马利，郑津洋，寿比南，缪存坚，施才兴，秦永泉，吴琳琳，杨进，方圆（2008）. 奥氏体不锈钢制压力容器强度裕度研究. 《压力容器》.
295. 张正潮，刘富君，郑津洋，郭小联，朱国辉，徐铭泽（2008）. 当量屈服强度法在双层管液压成形中的应用. 《压力容器》.
296. 郑津洋，施建峰（2008）. 2008年ASME PVP会议简介. 《压力容器》.
297. 徐平，刘鹏飞，刘延雷，郑津洋，赵永志，陈虹港，别海燕（2008）. 高压储氢罐不同位置泄漏扩散的数值模拟研究. 《高校化学工程学报》.
298. 韩树新，盛水平，郑津洋，高永建，周宁（2008）. 大型双锥密封过程非线性数值分析. 《压力容器》.
299. Jinyang Zheng, Yu-Bin Lu, Li Xiang, Xiufeng Lin, Yan-Cong Zhu, Ping Xu, Defu Chen, Xiao-Liang He, Tai-Yuan Shao (2008). Experimental Investigation on Mechanical Properties of Plastic Pipes Reinforced by Cross Helically Steel Wires.DOI
300. Ping Xu, Jinyang Zheng, Pengfei Liu, Rui Chen, Fangming Kai, Lei Li (2008). Risk identification and control of stationary high-pressure hydrogen storage vessels. Journal of Loss Prevention in the Process Industries.DOI
301. Pengfei Liu, Ping Xu, Shuxin Han, Jinyang Zheng (2008). Optimal design of pressure vessel using an improved genetic algorithm. Journal of Zhejiang University. Science A.DOI
302. Pengfei Liu, Jinyang Zheng, Li Ma, Cunjian Miao, Linlin Wu (2008). Calculations of plastic collapse load of pressure vessel using FEA. Journal of Zhejiang University. Science A.DOI
303. Duyi Ye, Jinyang Zheng (2008). A Model for the Determination of Residual Fatigue Life of a Nickel-Based Superalloy. Journal of Engineering Materials and Technology.DOI
304. Jinyang Zheng, Yongjian Gao, Xiang Li, Xiufeng Lin, Yubin Lu, Yancong Zhu (2008). Investigation on short-term burst pressure of plastic pipes reinforced by cross helically wound steel wires. Journal of Zhejiang University. Science A.DOI
305. Jinyang Zheng, Lei Li, Rui‐Pin Chen, Ping Xu, Fangming Kai (2008). High Pressure Steel Storage Vessels Used in Hydrogen Refueling Station. Journal of Pressure Vessel Technology.DOI
306. Honggang Chen, Jinyang Zheng, Yanlei Liu, Ping Xu, Lei Li, Pengfei Liu, Haiyan Bie (2008). Optimization of Hydrogen Utilization Ratio in Hydrogen Filling Stations. Volume 1: Codes and Standards.DOI
307. J. J. Ye, Yang Jian-guo, P. Tang, Jinyang Zheng, W. Z. Li, C. K. Lam, M. McKenna, Y. B. (2008). Using Improved DSMC Method in Simulating for the Heat and Mass Transfer in Microchannels. Volume 10: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A, B, and C.DOI
308. Xiang Li, Jinyang Zheng, Yaxian Li, Ping Xu, Chunying Zheng, Taiqing Shao, Hangzeng Shao, Defu Chen, Guangzhong Li, Xiaolian He (2008). Long-Term Stress Analysis of Plastic Pipe Reinforced by Cross-Winding Steel Wire.DOI
309. Li Ma, Jinyang Zheng, Cunjian Miao, Yongquan Qin, Shuxin Han, Shuiping Sheng, Caixing Shi (2008). Analysis of Strength Margins for Austenitic Stainless Steel Pressure Vessels. Volume 1: Codes and Standards.DOI
310. Li Ma, Jinyang Zheng, Cunjian Miao, Yongquan Qin, Shuiping Sheng, Shuxin Han, Caixing Shi (2008). Nonlinear Analysis of Pressure Strengthening for Austenitic Stainless Steel Pressure Vessel.DOI
311. Fujun Liu, Jinyang Zheng, Shoubao Ding, Xiaolian Guo (2008). Theoretical Analysis and Numerical Simulation on the Hydraulic Expansion of Double-Layered Tubes.DOI
312. Xin Ma, Zhongpei Ning, Honggang Chen, Jinyang Zheng (2008). Modeling and Optimization of Ultra High Pressure Vessel With Self-Protective Flat Steel Ribbons Wound and Tooth-Locked Quick-Actuating End Closure.DOI
313. Xin Ma, Jinyang Zheng, Zhongpei Ning, Honggang Chen (2008). Investigation on the Strength of Ultra High Pressure Vessel Cylinder With Self-Protective Flat Steel Ribbons Wound.DOI
314. 郑津洋，别海燕，徐平，刘鹏飞，陈虹港，Dryver Huston（2007）. 车用纤维全缠绕高压储氢气瓶标准研究. 《压力容器》.
315. 杜伟，刘鹏飞，郑津洋，钱增友，谢铕鑫，王儒涛（2007）. 矩形蒸汽灭菌器强度数值模拟与试验研究. 《压力容器》.
316. 郑津洋，陈虹港，马歆（2007）. 《超高压容器安全技术监察规程》若干问题说明. 《压力容器》.
317. 王卉，郑津洋，郭伟灿，方晓斌，丁良玉，寇官祥，Hyeon Jae SHIN，施建峰（2007）. 聚乙烯管道电熔焊接接头的超声检测. 《压力容器》.
318. 郑津洋（2007）. “对欧盟标准EN13445基于应力分类法分析设计的理解”一文的几点商榷意见. 《压力容器》.
319. J. J. Ye, Yang Jian-guo, Jinyang Zheng, W. Z. Li, shu he, Yongbin Ma (2007). New Treatment of Pressure Boundary Conditions for DSMC Method in Micro-Channel Flow Simulations.DOI
320. Yanlei Liu, Jinyang Zheng (2007). Numerical Simulation of the Diffusion of Natural Gas Due to Pipeline Failure.DOI
321. Jianjun Ye, Jian Hui Yang, Jinyang Zheng, Jie Sheng, Guofu Ou (2007). Microscale Numerical Simulation on Dynamic Damage for the Deflagrated Pressure Vessels.DOI
322. 刘富君，郑津洋，郭小联，朱国辉，徐铭泽（2006）. 双层管液压胀合过程的试验研究. 《压力容器》.
323. 郑津洋，李翔，朱彦聪，林秀峰，卢玉斌，刘鹏飞（2006）. 钢丝缠绕增强塑料(PE)复合管研究进展. 《2006年中国机械工程学会年会暨中国工程院机械与运载工程学部首届年会论文集》.
324. 苏文献，叶立，郑津洋，开方明，黄为民（2006）. 齿啮式快开压力容器塑性载荷的5%最大主应变方法. 《石油化工设备》.
325. 苏文献，郑津洋，开方明，叶立，黄为民（2006）. 齿啮式快开压力容器整体有限元塑性载荷分析. 《压力容器》.
326. 刘延雷，戴光，郑津洋（2006）. 漏磁检测管道裂纹的有限元分析与试验研究. 《压力容器》.
327. 方晓斌，郑津洋，郭伟灿，石平，陈虹港（2006）. 超高压容器和管道周向超声检测(二). 《压力容器》.
328. 郭伟灿，郑津洋，虞雪芬，方晓斌，王卉，钱青江（2006）. 超高压容器和管道周向超声检测(一). 《压力容器》.
329. 李翔，张庆锋，谢禹钧，郑津洋（2006）. 发生桩基沉降在役压力管道的断裂失效风险分析. 《压力容器》.
330. 田锦邦，赵隆茂，郑津洋（2006）. 双层扁平绕带式压力容器的刚塑性动力响应分析. 《爆炸与冲击》.
331. Pengfei Liu, Jinyang Zheng (2006). A Monte Carlo finite element simulation of damage and failure in SiC/Ti–Al composites. Materials Science and Engineering A.DOI
332. 卢玉斌，马歆，方晓斌，陈志伟，郑津洋，邱水录（2005）. 塑料基金属复合管研究进展. 《化工机械》.
333. 苏文献，叶立，郑津洋，开方明（2005）. 防止承压设备总体塑性变形的5%最大主应变准则. 《压力容器》.
334. 郑津洋，陈瑞，李磊，张立芳，俞群，徐平，开方明，朱国辉，叶晓茹，魏春华，楼桦东，朱玉娟（2005）. 多功能全多层高压氢气储罐. 《压力容器》.
335. 马歆，郑津洋，陈西南，孙国有（2005）. 轻型薄壁箱形结构耐压强度研究. 《压力容器》.
336. 陈志伟，寿比南，郑津洋（2005）. 大型多鞍座卧式容器设计方法分析. 《压力容器》.
337. 陈勇军，朱劲松，孙国有，邓贵德，郑津洋（2005）. 动载荷作用下区分厚壁圆筒和薄壁圆筒的一个准则. 《压力容器》.
338. 刘汇源，陈学东，郑津洋，刘扬（2005）. 石化企业承压设备安全阀失效模式及失效原因. 《压力容器》.
339. 刘仲强，徐平，孙国有，郑津洋，陈虹港，邓贵德（2005）. 现有城市燃气管线接纳天然气能力的研究. 《化工机械》.
340. 郭伟灿，郑津洋，方晓斌，马夏康，马歆，陈虹港，程茂（2005）. 内外径之比小于0.8筒形锻界周向超声检测. 《第六届全国压力容器学术会议》.
341. 郑津洋，开方明，方晓斌，孙国有（2005）. 压力危险与承压设备法规标准. 《第六届全国压力容器学术会议》.
342. 马歆，郑津洋，陈西南，孙国有（2005）. 轻型薄壁箱形结构耐压强度的数值模拟与试验研究. 《第六届全国压力容器学术会议》.
343. 马歆，郑津洋（2004）. 注剂式带压密封夹具设计新方法. 《化工机械》.
344. 郑津洋，开方明，刘仲强，陈长聘，马夏康（2004）. 轻质高压储氢容器. 《化工学报》.
345. Fujun Liu, Jinyang Zheng, Ping Xu, XU Ming-ze, Guohui Zhu (2004). Forming mechanism of double-layered tubes by internal hydraulic expansion. International Journal of Pressure Vessels and Piping.DOI
346. Jinyang Zheng, Ping Xu, Q Fu, Rusi P. Taleyarkhan, S H Kim (2004). Elastic stress waves of cylindrical rods subjected to rapid energy deposition. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
347. 郑津洋，开方明，陈西南，石平（2003）. 欧盟标准EN13445简介及其与我国压力容器标准的比较. 《压力容器》.
348. 郑津洋，苏文献，徐平，刘爱平（2003）. 基于整体有限元应力分析的齿啮式快开压力容器设计. 《压力容器》.
349. 刘富君，郑津洋，戴光（2003）. 立式储罐罐底腐蚀状态声发射检测的实验研究. 《压力容器》.
350. 郑津洋，苏文献（2003）. 欧盟压力容器分析设计标准. 《品牌与标准化》.
351. Xiaochun Wang, Jinyang Zheng (2003). Safety Assessment of the Junction Between a Thick Pressure Vessel Shell and a Thinner Hemispherical Head.DOI
352. 傅强，陈志平，郑津洋（2002）. 弹性基础上大型石油储罐的应力分析. 《化工机械》.
353. 郑津洋，朱国辉 朱立 郑津洋 郑传祥 陈志平 吴红梅（2001）. 钢复合结构压力容器技术. 《中国工程科学》, Vol. 3, No. 7.下载原文
354. 孙国有，王晓春，吴立军，郑津洋（2001）. 压力容器中倾斜裂纹的失效分析方法. 《浙江大学学报(工学版)》.
355. 孙国有，吴立军，王晓春，郑津洋，杨铁成（2001）. 倾斜裂纹的韧性断裂与安全分析方法. 《第五届全国压力容器学术会议》.
356. 孙国有，肖芬，郑津洋（2001）. 双O形圈自紧式密封结构的分析与设计. 《压力容器》.
357. 刘爱萍，陈志平，郑津洋（2001）. 矩形大开孔的补强结构设计. 《压力容器》.
358. 郑津洋，陈志平，孙国有（2001）. 压力容器设计技术进展及我国应采取的对策. 《石油机械》.
359. Jinyang Zheng, Guangming Sun, Zheng Chen, Ping Xu, A Liu, Y Liu (2001). Unique design of the junction between a thick pressure vessel shell and a thinner hemispherical head. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
360. 陈志平，李晓红，郑津洋，孙国有（2000）. ABS工程塑料管爆破压力测试研究. 《化工机械》.
361. 郑津洋，孙国有，徐平，陈志平，陈纯，黄开杰，易海洋（1999）. 带有厚度与筒体不相等半球形封头热套高压容器强度研究. 《压力容器》.
362. 郑津洋，李初排（1999）. 我国三个主要钢制压力容器标准之间的关系. 《石油机械》.
363. Jinyang Zheng, Ping Xu, L Q Wang, Guopeng Zhu (1999). A more accurate method for predicting the stresses in a flat steel ribbon wound pressure vessel. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
364. 朱瑞林，郑津洋，朱国辉（1998）. 关于折边锥形封头设计问题的研究. 《化工机械》.
365. 郑津洋（1998）. 压力容器设计技术进展. 《石油化工设备》.
366. Jinyang Zheng, Guangming Sun, L.Q. Wang (1998). A review of development in layered vessels using flat-ribbon-wound cylindrical shells. International Journal of Pressure Vessels and Piping.DOI
367. Jinyang Zheng (1998). New Method for Design of Flat Steel Ribbon-Wound Pressure Vessels. Journal of Pressure Vessel Technology.DOI
368. Jinyang Zheng, Ping Xu, C Chen (1998). Investigation on bursting pressure of flat steel ribbon wound pressure vessels. International Journal of Pressure Vessels and Piping.DOI
369. 郑津洋（1997）. 快速开关盖式压力容器(二). 《化工装备技术》.
370. 郑津洋，孙国有（1997）. 电解槽端压板的结构改进及强度分析. 《化工机械》.
371. 郑津洋（1997）. 快速开关盖式压力容器(四). 《化工装备技术》.
372. 郑津洋（1997）. 快速开关盖式压力容器(三). 《化工装备技术》.
373. 郑津洋（1997）. 快速开关盖式压力容器(一). 《化工装备技术》.
374. 郑津洋，朱国辉（1997）. BC95-378《扁平钢带倾角错绕式压力容器》标准总体思路. 《中国特种设备安全》.
375. 黄载生，郑津洋，陈冰冰，郑醒尘（1997）. 新结构超高压容器的强度及实验研究. 《压力容器》.
376. 郑津洋（1997）. BC95-378《扁平绕带式压力容器设计》述评. 《化工机械》.
377. 郑津洋，候灿明（1996）. 压力容器在食品加工中的应用（二）. 《化工装备技术》.
378. 郑津洋，侯灿明（1996）. 压力容器在食品加工中的应用（一）. 《化工装备技术》.
379. 朱国辉，郑津洋，黄载生，郑传祥，吴红梅（1995）. 扁平绕带式压力容器的设计理论与发展分析. 《化工设备与管道》.
380. 吴红梅，朱国辉，郑津洋，黄载生（1995）. 扁平绕带式压力容器参数合理设计. 《压力容器》.
381. 郑津洋（1995）. 新型高压密封装置的优化设计. 《化工机械》.
382. J．P．凯尼格，郑津洋（1994）. 型槽绕带式压力容器的制造和操作经验. 《化工生产与技术》.
383. 郑津洋，朱国辉，黄载生（1993）. 扁平绕带式压力容器的设计、制造和检验(二). 《化工装备技术》.
384. 郑津洋，朱国辉，黄载生（1993）. 扁平绕带式压力容器的设计、制造和检验(三). 《化工装备技术》.
385. 吕考佳，郑津洋，朱国辉，黄载生（1993）. 绕带式压力容器优化设计分析. 《化工装备技术》.
386. 郑津洋，朱国辉，王乐勤，黄载生（1993）. 新型绕带式压力容器的设计准则. 《浙江大学学报(工学版)》.
387. 郑津洋，朱国辉，黄载生（1992）. 扁平绕带式压力容器的设计、制造和检验(一). 《化工装备技术》.
388. 郑津洋，朱国辉，黄载生（1991）. 绕带式压力容器采用适应性随机搜索法的优化设计(Ⅰ). 《浙江大学学报(工学版)》.
389. 郑津洋，朱国辉，黄载生（1991）. 超高压容器的典型事故案例和对策分析. 《压力容器》.

预印本

1. Chengshuang Zhou, Hongbin Zhou, Yan Jin, Qian Liu, Yuchen Xie, Lin Zhang, Jinyang Zheng (2024). Influence of Co2 Partial Pressure and Carbon Content on the Hydrogen Embrittlement Behavior of Low Carbon Steel in High-Pressure Hydrogen Atmosphere. SSRN Electronic Journal.DOI
2. Chengshuang Zhou, Hongbin Zhou, Yan Jin, Qian Liu, Yuchen Xie, Lin Zhang, Jinyang Zheng (2024). The Influence of Co2 on Hydrogen Embrittlement of Pure Iron and Low Carbon Steel in a High-Pressure Hydrogen Environment. SSRN Electronic Journal.DOI

书籍章节

1. Jinyang Zheng, Keming Li (2021). Buckling of Ellipsoidal Heads. Springer eBooks.DOI
2. Jinyang Zheng, Keming Li (2021). Plastic Collapse of Ellipsoidal Heads. Springer eBooks.DOI
3. Jinyang Zheng, Keming Li (2021). Control of Fabrication Quality of Ellipsoidal Heads. Springer eBooks.DOI
4. Jinyang Zheng, Keming Li (2021). Introduction. Springer eBooks.DOI