胡茂良｜哈尔滨理工大学｜学者主页

2026

微量稀土Y对AlCrMo0.5NbV体系难熔高熵合金组织和性能的影响

汪天天，蒋文韬，姜博，王晔，朱冬冬，许红雨，胡茂良

《铸造》

2026

AZ91D镁合金差速器支架近液相线挤压铸造浇排系统优化

徐阳，赵春芳，刘佳伟，周乐峰，胡茂良，吉泽升

《铸造工程》

2026

Enhanced corrosion resistance of A356 aluminum alloy via shot peening surface modification

Naizhi Liu, Bo Jiang, 钦传光, Maoliang Hu, Hongyu Xu, Ye Wang

Surfaces and Interfaces

DOI

2026

Synergistic grain refinement of Al-Si alloys: Ce-driven interfacial electronic reconstruction and temperature-tailored V2Al20Ce/VB2 evolution

Jiawei Liu, Maoliang Hu, Rui Gao, Hongyu Xu, Ye Wang, Bo Jiang

Journal of Alloys and Compounds

DOI

2026

High Wear-resistant APC/7075Al composites fabricated via hydrothermal carbonization coating of powders and vacuum hot-press sintering

Hongyu Xu, Zhizhao Zhang, Tiexin Liu, Bo Jiang, Ye Wang, Maoliang Hu, Xiaochen Zhang

Materials Letters

DOI

2026

Tailoring intermetallic anisotropy in AZ91 alloy via Y/La co-addition: A dual-site occupancy mechanism

Rui Gao, Maoliang Hu, Jiawei Liu, Ye Wang, Bo Jiang, Hongyu Xu

Journal of Magnesium and Alloys

DOI

2026

Thermal conductivity variation of ADC12 alloy driven by microstructure characteristics

Xu Liu, Bo Jiang, Yu Guo, Hongyu Xu, Maoliang Hu, Yue Wang

China Foundry

DOI

2026

First-principles study of intermetallic compounds in Al–Si alloys: electronic structure and thermal transport properties

Guangpu Zhu, Yu Guo, Bo Jiang, Xun Zhang, Hongyu Xu, Yue Wang, Maoliang Hu

Physica Scripta

DOI

2026

Atomic-scale interfacial engineering of MgAl2O4 in GdB2C2/6061Al composites for synergistic enhancement of strength-ductility and neutron shielding performance

Qian Shi, Tao Bo, Maoliang Hu, Pengxing Cui, Hao Wang, Yong Sun, Xiaobing Zhou

Journal of Alloys and Compounds

DOI

2026

A novel neutron-shielding GdB6/7075Al composite with MgO-modified interface for spent fuel containment applications

Pengxing Cui, Qian Shi, Guoqing Wang, Maoliang Hu, Hao Wang, Yong Sun, Xiaobing Zhou

Radiation Physics and Chemistry

DOI

2026

Recycling of Al/Ti machining chips into a novel Al–5Ti–0.25C–4Sr master alloy for synergistic refinement and modification of A356 alloy

Guo Yu, Maoliang Hu, Fei Wang, Bo Jiang, Hongyu Xu, Ye Wang, Zesheng Ji

Materials Science and Technology

DOI

2026

The Effect of Al Content on the Microstructure and Mechanical Properties of Mg-6Gd-3Y Alloy

Xu Zhao, Maoliang Hu, Songling Zhang, Ye Wang, Hongyu Xu, Bo Jiang, Pengxing Cui

International Journal of Metalcasting

DOI

2026

Deep cryogenic rolling-induced microstructural evolution and simultaneous enhancement of mechanical properties and electrical conductivity in Al-Mg-Si-0.2La alloy

Hongyu Xu, Han Yu, Haifeng Jia, Mingliang Li, Bo Jiang, YE WANG, Maoliang Hu, Zesheng Ji, Xiaochen Zhang

Journal of Alloys and Compounds

DOI

2026

Simultaneously improving thermal conductivity and mechanical properties of Al-Si alloys: Based on the influence of microscopic defects and second phase

Xu Liu, Bo Jiang, Yu Guo, Pengshuai Pan, Hongyu Xu, Yue Wang, Maoliang Hu

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2026

Effect of ADC12/A356 alloy chips mixing ratio on microstructure and properties of solid-state recycled aluminum alloys

Chenlong Wang, Yu Guo, Bo Jiang, Hongyu Xu, Maoliang Hu, Ye Wang

Materials Letters

DOI

2026

Microstructural Evolution and Simultaneous Enhancement of Mechanical and Tribological Properties in Low‐Mass‐Fraction B 4 C/7075 Al Composites

Hongyu Xu, Rui Zhou, Bo Jiang, Ye Wang, Maoliang Hu, Zesheng Ji, Xiaochen Zhang

Advanced Engineering Materials

DOI

2025

再生屑料制备Al-Ti-B-Ce晶粒细化剂及其细化效果

叶翔，赵春芳，余果，刘桐，王飞，胡茂良，吉泽升

《材料热处理学报》

2025

Synergistic strengthening-toughening of in-situ (TiAl3+TiC)/Al composites via TiAl3 fragmentation and TiC-induced α-Al grain refinement

Fei Wang, Maoliang Hu, Bo Jiang, Qingyu Ran, Ye Wang, Hongyu Xu, Zesheng Ji

Materials Science and Engineering A

DOI

2025

Effects of Semi-Solid Isothermal Heat Treatment on the Tribological Behavior of Al-15%Mg2Si-5%TiB2 Composites

Bin Zhang, Bo Jiang, Ye Wang, Hongyu Xu, Maoliang Hu, Yu Guo, Zesheng Ji

Journal of Materials Engineering and Performance

DOI

2025

Insights into the strengthening mechanism of L12-TiAl3/Al (010) interfaces from first-principles calculations

Fei Wang, Maoliang Hu, Bo Jiang, Hongyu Xu, Ye Wang, Zesheng Ji

Applied Surface Science

DOI

2025

Newly discovered members of TiAl3 morphology and their growth theories

Fei Wang, Maoliang Hu, Bo Jiang, Qian Shi, Pengxing Cui, Ye Wang, Hongyu Xu, Zesheng Ji

Intermetallics

DOI

2025

Effect of hydrothermal temperature on microstructure, mechanical and tribological properties of APC/A6061 laminated composites fabricated via HTCAP-VHPS process

Hang Zhao, Hongyu Xu, Bin Gao, Bo Jiang, Ye Wang, Maoliang Hu, Zesheng Ji

Materials Today Communications

DOI

2025

Interface Structure and Strengthening Mechanism of AZ91 Alloy Reinforced by MgO-Coated Graphene Nanoplatelets

Xue Tian, Hongyu Xu, Dihui Song, Bo Jiang, Ye Wang, Maoliang Hu, Zesheng Ji

Journal of Materials Engineering and Performance

DOI

2025

Effect of La content on microstructure, tensile properties, and electrical conductivity of cast Al-Mg-Si-xLa alloys

Hongyu Xu, Hai-feng Jia, Zesheng Ji, Mingliang Li, Yu Han, Bo Jiang, Ye Wang, Maoliang Hu

China Foundry

DOI

2025

Population dynamics behaviors of TiC and their effect on grain refinement in Al–Ti–C refiners: Growth, agglomeration, nucleation and precipitation

Fei Wang, Maoliang Hu, Qian Shi, Bo Jiang, Ye Wang, Hongyu Xu, Zesheng Ji

Journal of Materials Research and Technology

DOI

2024

浇注温度对近液相线挤压铸造AZ91D镁合金组织及性能的影响

赵春芳，马光全，颜泽华，胡茂良，吉泽升

《特种铸造及有色合金》

2024

添加碳粉对AZ91镁合金微观组织与力学性能的影响

王殿君，胡茂良，张明秋，王洪英，张吉生，高恩达

《热加工工艺》

2024

铝板水热碳吸附工艺制备APC/Al层状复合材料的显微组织、力学性能和摩擦学性能（英文）

陈奕涵，许红雨，姜博，王晔，胡茂良，吉泽升

Transactions of Nonferrous Metals Society of China

2024

La/Nd比对AZ91-RE合金显微组织和拉伸性能的影响（英文）

崔鹏星，胡茂良，吉泽升，王晔，郭宇，许红雨

Transactions of Nonferrous Metals Society of China

2024

Mechanism of Iron-rich Compound Modification and Purification in Recycled AlSi10MgFe Alloy with Manganese

Bo Jiang, Qin Chuangang, Yang Wanting, Yefei Wang, Hongyu Xu, Maoliang Hu, Guo Hao Yu, Zesheng Ji

International Journal of Metalcasting

DOI

2024

Refining mechanism of primary Mg2Si and wear resistance in Al-15 %Mg2Si composites by TiB2 particles addition

Xinwei Yang, Bo Jiang, Ye Wang, Hongyu Xu, Maoliang Hu, Yu Guo

Materials Letters

DOI

2024

Evolution of (Ti, V) Compounds in the Al-Ti-V-B System and the Refinement Performance Thereof

Qingyu Ran, Maoliang Hu, Tong Liu, Fei Wang, Bo Jiang, Hongyu Xu, Ye Wang, Zesheng Ji

JOM

DOI

2024

Study on hot deformation behavior and dynamic recrystallization mechanism of recycled Al–Zn–Mg–Cu alloy

Chuan-guang Qin, Bo Jiang, Maoliang Hu, Ye Wang, Hongyu Xu, Yu Guo, Zesheng Ji

Journal of Materials Research and Technology

DOI

2024

Microstructural evolution mechanism and mechanical properties of La and Gd on AZ91 alloy: Experiments and first-principles calculations

Songling Zhang, Maoliang Hu, Ye Wang, Pengxing Cui, Hongyu Xu, Bo Jiang

Journal of Alloys and Compounds

DOI

2024

First-principles study of Ti adsorption on Al4C3 (0001) surface

Fei Wang, Maoliang Hu, Bo Jiang, Pengxing Cui, Hongyu Xu, Ye Wang, Zesheng Ji

Applied Surface Science

DOI

2024

Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg–Al–Zn Alloy Prepared by Solid‐State Recycling of Mixed Waste Chips

Shuang Lei, Hongyu Xu, Bo Jiang, Ye Wang, Maoliang Hu, Zesheng Ji

Advanced Engineering Materials

DOI

2024

Effect of the TiB2 content on the mechanical and tribological properties of TiB2/AZ91 composites fabricated by vacuum hot-press sintering process incorporating vacuum ball milling

Xin Sui, Hongyu Xu, Bo Jiang, Ye Wang, Maoliang Hu, Zesheng Ji

Materials Today Communications

DOI

2024

Effect of La/Nd ratio on microstructure and tensile properties of AZ91-RE alloys

Pengxing Cui, Maoliang Hu, Zesheng Ji, Ye Wang, Yu GUO, Hongyu Xu

Transactions of Nonferrous Metals Society of China

DOI

2024

Solid-State Synthesis of SiC Particle-Reinforced AZ91D Composites: Microstructure and Reinforcement Mechanisms

Qian Shi, Pengxing Cui, Maoliang Hu, Fei Wang, Hongyu Xu, Xiaobing Zhou

Metals

DOI

2024

Efficient modification eutectic Si of Al-10Si alloy with Mg-Gd master alloy addition

Bo Jiang, Bo Jiang, Bin Jiang, Bin Jiang, Wanting Yang, Ye Wang, Hongyu Xu, Maoliang Hu, Yu Guo

Materials Letters

DOI

2024

Microstructure, mechanical and tribological properties of APC/Al laminated composites prepared by hydrothermal carbon adsorption on plates

Yihan Chen, Hongyu Xu, Bo JIANG, Ye Wang, Maoliang Hu, Zesheng Ji

Transactions of Nonferrous Metals Society of China

DOI

2023

Al对AlxMo0.5NbTiVSi0.2高熵合金组织和性能影响

王晔，汪天天，蒋文韬，姜博，朱冬冬，胡茂良

《特种铸造及有色合金》

DOI

2023

废料回炉比对AlSi10MgFe合金组织及性能的影响

袁际滨，姜博，杨婉婷，吉泽升，胡茂良，王晔，王云龙，张永冰

《特种铸造及有色合金》

2023

复杂结构ADC12铝合金汽车支架挤压铸造工艺参数优化

朴俊杰，姜博，胡茂良，王晔，吉泽升，SUGIYAMA Sumio，许红雨，王云龙，张永冰

《精密成形工程》

2023

Effect of modification and subsequent heat treatment on thermal and mechanical properties of near-eutectic Al-Si-Fe-Mg alloys

Ye Wang, Jinlin Li, Yu Guo, Bo Jiang, Maoliang Hu, Zesheng Ji

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering

DOI

2023

Effect of Cryorolling on Microstructure, Conductivities, and Mechanical Properties of a Cast Near-Eutectic Al-Si-Fe-Mg Alloy

Pengshuai Pan, Bo Jiang, Yu Guo, Ye Wang, Hongyu Xu, Maoliang Hu

Journal of Materials Engineering and Performance

DOI

2023

A Novel Al-Ti-C-B-Ce Alloy Preparation Process and Its Refinement Effect to A356 Alloy

Tong Liu, Maoliang Hu, Qingyu Ran, Bo Jiang, Zesheng Ji, Xiaobing Zhou

JOM

DOI

2023

Study of Microstructure and Mechanical Properties of Short Carbon Fibers Reinforced Mg Matrix Composites Fabricated by Hot Extrusion

Zhao Yang, Hongyu Xu, Bo Jiang, Ye Wang, Maoliang Hu, Zesheng Ji

Transactions of the Indian Institute of Metals

DOI

2023

Synthesis of Al-5Ti-1B-1Ce alloy from remelted chips and its refinement effect

Tong Liu, Maoliang Hu, Xujun Li, Junjie Piao

Materials Letters

DOI

2023

Design a novel APC/A6061 laminated composite with high wear resistance

Hongyu Xu, Yihan Chen, Tiexin Liu, Hang Zhao, Ye Wang, Maoliang Hu, Zesheng Ji

Materials Letters

DOI

2023

Comparison between spark plasma sintering and hot extrusion for solid-state recycling of Al-Si-Cu-Fe alloy chips

Ye Wang, Xiuyu Gao, Bo Jiang, Dongdong Zhu, Maoliang Hu, Wentao Jiang

Kovove Materialy-Metallic Materials

DOI

2023

Effect of Near-Liquidus Squeeze Casting Pressure on Microstructure and Mechanical Property of AZ91D Alloy Differential Support

Chunfang Zhao, Guangquan Ma, Tong Liu, Maoliang Hu, Zesheng Ji

Materials

DOI

2023

Effect of high pressure on solidification microstructure evolution of near-eutectic Al-11.5Si-0.5Fe-0.2 Mg alloy

Ye Wang, Haosheng Huang, Bo Jiang, Dongdong Zhu, Duo Dong, Maoliang Hu

Materials Chemistry and Physics

DOI

2023

Effect of aging treatment on properties of Al–Si alloy solidified at high-pressure

Haosheng Huang, Bo Jiang, Wentao Jiang, Ye Wang, Dongdong Zhu, Maoliang Hu

Materials Science and Technology

DOI

2022

大壁厚差铝合金发动机支架挤压铸造工艺优化

李锦东，吉泽升，何维明，姜博，胡茂良，宋伟生，王云龙，张永冰

《特种铸造及有色合金》

2022

Effect of CeO2 on Al–Ti–C and matrix conversion between TiC and α-Al orientation relationship

Tong Liu, Maoliang Hu, Fei Wang, Bo Jiang, Zesheng Ji

Journal of Materials Science

DOI

2022

Effect of La/Nd ratio on precipitation kinetics and tensile properties of squeeze-cast Mg-Al-Zn-La-Nd alloys

Pengxing Cui, Maoliang Hu, Zesheng Ji, Hongyu Xu, Xun Zhang, Tongrui Zhang

Materials Today Communications

DOI

2022

Design and preparation of aluminum alloy with high thermal conductivity based on CALPHAD and first-principles calculation

Ye Wang, Huijun Kang, Yu Guo, Hongtao Chen, Maoliang Hu, Zesheng Ji

China Foundry

DOI

2022

Microstructure of Al–Ti–C master alloy triggered by rare-earth Ce

Fei Wang, Maoliang Hu, Tong Liu, Bo Jiang, Zesheng Ji

Journal of materials research/Pratt's guide to venture capital sources

DOI

2022

Erratum: Effect of isothermal process parameters on semi-solid microstructure of chip-based Al–Cu–Mn–Ti alloy prepared by SIMA method

Ye Wang, Maoliang Hu, Hongyu Xu, Zesheng Ji, Xuefeng Wen, Xiaodong Liu

Modern Physics Letters B

DOI

2022

Effect of La/Nd Ratio on the Microstructure and Corrosion Behaviors of Squeeze-Cast Mg–Al–Zn–La–Nd Alloys

Pengxing Cui, Maoliang Hu, Zesheng Ji, Hongyu Xu, Naizhi Liu, Zhehua Yan

International Journal of Metalcasting

DOI

2022

Influence of trace amount chromium on microstructure and corrosion behavior of A356-5vol.%TiB2 alloy

Naizhi Liu, Bo Jiang, Ye Wang, Zesheng Ji, Maoliang Hu, Hongyu Xu

Materials Letters

DOI

2021

挤压铸件不同部位和壁厚的组织及溶质分布

张永冰，吉泽升，汪胜，胡茂良，姜博，宋伟生

《特种铸造及有色合金》

DOI

2021

Al-5Ti-0.25C合金制备工艺及其细化效果研究

杨何，胡茂良，刘桐，周雨晴，卢凯，杨兴飞，吉泽升

《精密成形工程》

2021

Microstructure evolution, thermal conductivity and mechanical properties of hot-rolling Al–Si–Fe–Mg alloy under different reductions

Yu Guo, Ye Wang, Bo Jiang, Hongtao Chen, Hongyu Xu, Maoliang Hu, Zesheng Ji

Modern Physics Letters B

DOI

2021

Preparation Process and Phase Transformation of Al-5Ti-0.25C Master Alloy Adopting Ti Machining Chips

Sanbo Li, Chunfang Zhao, Fei Wang, Maoliang Hu, Zesheng Ji, Sumio Sugiyama

Materials

DOI

2021

Microstructure, mechanical and tribological properties of (APC+B4C)/Al hybrid composites prepared by hydrothermal carbonized deposition on chips

Yingjie He, Hongyu Xu, Bo Jiang, Zesheng Ji, Maoliang Hu

Journal of Alloys and Compounds

DOI

2021

Fabrication of Al–Ti–B Grain Refiner Using Machining Ti Chips, Reaction Mechanisms and Grain Refinement Performance in Pure Al

Maoliang Hu, Fei Wang, Bo Jiang, Hua Sheng Wang, Yile Liu, Zesheng Ji

Metals and Materials International

DOI

2021

Microstructure and mechanical properties of AlCrFeCoNi high-entropy alloy particle reinforced Mg-9Al-1Zn matrix composites

Yongsheng Chen, Zesheng Ji, Maoliang Hu, Hongyu Xu, Guangjie Feng

International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)

DOI

2021

Simulations of Multiple Grains Growth of Mg–Al Alloy Semisolid Structure by Phase-Field-Lattice Boltzmann Simulation

Xun Zhang, Ye Wang, Zesheng Ji, Hongyu Xu, Maoliang Hu, Pengxing Cui

Metallurgical and Materials Transactions B

DOI

2021

Fabrication of Al-5Ti-1B master alloy using machining Ti chips and dissolution kinetics of Ti chips

Fei Wang, Maoliang Hu, Bo Jiang, Zesheng Ji

Materials Letters

DOI

2020

钛屑再生制备Al-Ti-B细化剂及其晶粒细化行为的研究

刘怡乐，胡茂良，吉泽升，许红雨，王晔

《材料科学与工艺》

2020

Dynamic recrystallization behavior and mechanical properties of bimodal scale Al2O3 reinforced AZ31 composites by soild state synthesis

Maoliang Hu, Shuaihu Wei, Qian Shi, Zesheng Ji, Hongyu Xu, Ye Wang

Journal of Magnesium and Alloys

DOI

2020

Effect of glucose concentrations on wear resistance of Al/APC composites prepared by hydrothermal carbonized deposition on chips

Yingjie He, Hongyu Xu, Maoliang Hu, Bo Jiang, Zesheng Ji

Journal of Material Science and Technology

DOI

2020

Effect of isothermal process parameters on semi-solid microstructure of chip-based Al–Cu–Mn–Ti alloy prepared by SIMA method

Ye Wang, Maoliang Hu, Hongyu Xu, Zesheng Ji, Xuefeng Wen, Xiaodong Liu

Modern Physics Letters B

DOI

2020

Evaluation of stabilities and thermophysical properties of Si-Sr intermetallics based on first-principles analysis

Yu Guo, Ye Wang, Hongtao Chen, Hongyu Xu, Maoliang Hu, Zesheng Ji

Results in Physics

DOI

2020

Effect of stirring rate on grain morphology of Mg-Al alloy semi-solid structure by phase field lattice Boltzmann simulation

Xun Zhang, Ye Wang, Dong-Rong Liu, Zesheng Ji, Hongyu Xu, Maoliang Hu, Pengxing Cui

Journal of Crystal Growth

DOI

2020

Effect of short carbon fiber content on SCFs/AZ31 composite microstructure and mechanical properties

Hongyu Xu, Yang Zhao, Maoliang Hu, Zesheng Ji

Results in Physics

DOI

2020

Effect of near-liquidus squeeze casting temperature on microstructure and mechanical property of AZ91D alloy differential support

Chunfang Zhao, Hongyu Xu, Zesheng Ji, Wei Liu, Maoliang Hu, Bo Jiang

Materials Letters

DOI

2020

Effect of La/Nd ratio on microstructure and mechanical properties of as-cast AZ91-xLa/Nd alloy

Pengxing Cui, Maoliang Hu, Zesheng Ji, Hongyu Xu, Xun Zhang, Meng Liu

Materials Research Express

DOI

2019

固溶时间对ADC12铝合金挤压铸造组织及力学性能的影响

姜博，吉泽升，胡茂良，张永冰，王云龙，王绍著

《中国有色金属学报》

DOI

2019

热挤压法制备双尺寸Al2O3/AZ31镁基复合材料的组织与性能

施倩，胡茂良，王飞，王旭忠

《材料热处理学报》

DOI

2019

多道次热挤压制备Al2O3/AZ31复合材料的微观组织与力学性能

魏帅虎，胡茂良，吉泽升，许红雨，王晔

《材料工程》

2019

镁含量对挤压铸造Al-10Si-2.5Cu-xMg合金显微组织及力学性能的影响

徐松，吉泽升，许红雨，胡茂良，王晔，张永冰

《金属热处理》

DOI

2019

固相合成制备短碳纤维增强镁基复合材料的结构与性能

杨钊，许红雨，胡茂良，吉泽升

《哈尔滨理工大学学报》

DOI

2019

多道次固相合成AZ91D-Nd合金的组织演变规律及力学性能

王殿君，胡茂良，吉泽升，许红雨，王晔

《中国有色金属学报》

DOI

2019

固相合成法制备Al2O3亚微米颗粒增强AZ31复合材料及强化机理

胡茂良，魏帅虎，吉泽升，许红雨，王晔

《中国有色金属学报》

DOI

2019

Microstructure and mechanical properties of Al2O3/AZ31 composites prepared by multi-pass hot extrusion

WEI Shuai-hu, Maoliang Hu, Zesheng Ji, Xu Hongyu, Yefei Wang

DOAJ (DOAJ: Directory of Open Access Journals)

DOI

2019

Effect of Mg addition on microstructure and mechanical properties of Al-Si-Cu-Fe alloy with squeeze casting

Bo Jiang, Song Xu, Hongyu Xu, Maoliang Hu, Yingjie He, Zesheng Ji

Materials Research Express

DOI

2019

Microstructure evolution and hot extrusion behavior of AZ31-Nd magnesium alloy adopting AZ31 chips and Mg-Nd chips

Dianjun Wang, Maoliang Hu, Sumio Sugiyama, Zesheng Ji, Hongyu Xu, Ye Wang

Results in Physics

DOI

2019

Investigation of the Microstructure and Mechanical Properties of AZ31/Graphene Composite Fabricated by Semi-solid Isothermal Treatment and Hot Extrusion

Yang Zhao, Hongyu Xu, Ye Wang, Maoliang Hu, Zesheng Ji

JOM

DOI

2019

Influence of reheating temperature on the microstructures and tensile properties of a short-carbon-fiber-reinforced magnesium matrix composite

Yang Zhao, Hongyu Xu, Yefei Wang, Maoliang Hu, Zesheng Ji

Materials Research Express

DOI

2019

Anisotropic elasticity, electronic structure and thermodynamic properties of Al-Fe-Si intermetallic compounds from first principles calculations

Yu Guo, Ye Wang, Hongtao Chen, Hongyu Xu, Maoliang Hu, Zesheng Ji

Solid State Communications

DOI

2019

Transformation of Fe-rich intermetallic phases and eutectic Si morphology in Al–Si–Cu–Fe cast alloy with solution treatment

Bo Jiang, Zesheng Ji, Hongyu Xu, Maoliang Hu, Yongbing Zhang, Shaozhu Wang

Materials Research Express

DOI

2018

A Study of the Mechanical and Thermal Characteristics of an Al-Si-Fe Alloy Fabricated by Rolling and Heat Treatment

Yu Guo, Ye Wang, Jieren Yang, Hongyu Xu, Maoliang Hu, Zesheng Ji

Metals

DOI

2018

A novel modifier on eutectic Si and mechanical properties of Al-Si alloy

Bo Jiang, Zesheng Ji, Maoliang Hu, Hongyu Xu, Song Xu

Materials Letters

DOI

2018

Enhanced mechanical properties of a chip-based Al-Si-Cu-Fe alloy with an in-situ emulsion decomposition recycled by solid-state processing

Ye Wang, Hongyu Xu, Maoliang Hu, Sumio Sugiyama, Zesheng Ji

Results in Physics

DOI

2018

Microstructure and mechanical properties of ADC12/6063-T6 aluminum alloy butt joint achieved by metal inert gas groove welding

Ye Wang, Mi Zhao, Hongyu Xu, Maoliang Hu, Zesheng Ji

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2018

First-principles study on stability, electronic, mechanical and thermodynamic properties of Al-Cu-RE ternary compounds

Yu Guo, Ye Wang, Hongtao Chen, Hongyu Xu, Maoliang Hu, Zesheng Ji

Solid State Communications

DOI

2018

Evaluation of microstructure and properties of AZ31/Al 2 O 3 composites prepared by solid-phase synthesis

Shuaihu Wei, Maoliang Hu, Zesheng Ji, Hongyu Xu, Ye Wang

Materials Science and Technology

DOI

2018

Microstructures and mechanical properties of SCF/AZ31B composites fabricated by multi-times hot-extrusion

Yang Zhao, Hongyu Xu, Ye Wang, Maoliang Hu, Zesheng Ji

Results in Physics

DOI

2017

Mg-Gd-Y-Zn-Zr合金冲击断裂机理研究

胡茂良，朱瑶，王渠东，吉泽升，许红雨，王晔

《哈尔滨工程大学学报》

2017

Microstructure and mechanical properties of AZ31-Ce prepared by multipass solid-phase synthesis

Yao Min Zhu, Maoliang Hu, Dianjun Wang, Hongyu Xu, Ye Wang, Zesheng Ji

Materials Science and Technology

DOI

2016

铝合金CSP工艺设计及品质优化

文学峰，王晔，牛连杰，许红雨，胡茂良，衫山澄雄，吉泽升

《特种铸造及有色合金》

DOI

2016

Mg-Gd-Y-Zr活塞微观组织及力学性能研究

胡茂良，吉泽升，王渠东，朱瑶，许红雨

《精密成形工程》

2016

固相再生Mg-Nd-Zn-Zr镁合金的时效强化

文丽华，吉泽升，许红雨，王宝芹，宁慧燕，翁江翔，胡茂良

《中国有色金属学报》

2016

Mg-10Y-4Gd-1.5Zn-0.4Zr合金的摩擦磨损行为（英文）

胡茂良，王渠东，吉泽升，许红雨，辛明德，马国睿

Transactions of Nonferrous Metals Society of China

2016

Wear behavior of Mg–10Y–4Gd–1.5Zn–0.4Zr alloy

Maoliang Hu, Qudong Wang, Zesheng Ji, Hongyu Xu, Minyan Xin, Guorui Ma

Transactions of Nonferrous Metals Society of China

DOI

2015

近液相线挤压铸造工艺对ADC12铝合金支架显微组织和力学性能的影响

王绍著，赵密，胡茂良，吉泽升，李欣，王云龙，Sumio SUGIYAMA，Jun YANAGIMOTO

《中国有色金属学报》

2015

固相合成道次对ZM6-Ce镁合金组织和性能的影响

文丽华，吉泽升，宁慧燕，毕凤阳，胡茂良

《稀有金属材料与工程》

2015

Mg-Gd-Y-Zn-Zr合金活塞成形工艺研究

胡茂良，王渠东，吉泽升，许红雨，辛明德，马国睿

《特种铸造及有色合金》

2014

除气剂及铬块尺寸对熔配法制备AlCr3中间合金组织的影响

胡茂良，吉泽升，许红雨

《轻合金加工技术》

2014

Segregation behavior of ADC12 alloy differential support formed by near-liquidus squeeze casting

Shaozhu Wang, Zesheng Ji, Sumio Sugiyama, Maoliang Hu

Materials & Design (1980-2015)

DOI

2014

Microstructure and mechanical properties of Mg–3.0Nd–0.4Zn–0.4Zr magnesium alloy

Wen Li, Zesheng Ji, Maoliang Hu, Huiyan Ning

Journal of Magnesium and Alloys

DOI

2013

Morphology of oxide and interface structure in AZ31B magnesium alloy prepared by solid state recycling

Zesheng Ji, S Y Wu, H B Li, Maoliang Hu, Meiping Wu

Materials Science and Technology

DOI

2012

AZ91D镁合金屑的固相再生(英文)

胡茂良，吉泽升，陈晓瑜，王渠东，丁文江

Transactions of Nonferrous Metals Society of China

2012

热压制工艺回收AZ91D镁合金屑的半固态组织演变(英文)

许红雨，吉泽升，胡茂良，王振宇

Transactions of Nonferrous Metals Society of China

2012

Mg-11Y-5Gd-2Zn镁合金干滑动的摩擦磨损行为(英文)

胡茂良，王渠东，李程，丁文江

Transactions of Nonferrous Metals Society of China

2012

Microstructure evolution of hot pressed AZ91D alloy chips reheated to semi-solid state

Hongyu Xu, Zesheng Ji, Maoliang Hu, Zhenyu Wang

Transactions of Nonferrous Metals Society of China

DOI

2012

Solid-state recycling of AZ91D magnesium alloy chips

Maoliang Hu, Zesheng Ji, Xiaoyu Chen, Qudong Wang, Wenjiang Ding

Transactions of Nonferrous Metals Society of China

DOI

2012

Semi-solid microstructure of AZ91D magnesium alloy recycled from waste chips during heat treatment

Hongyu Xu, Zesheng Ji, Maoliang Hu

International Forum on Strategic Technology

DOI

2012

Dry sliding wear behavior of cast Mg–11Y–5Gd–2Zn magnesium alloy

Maoliang Hu, Qudong Wang, Cheng Li, Wenjiang Ding

Transactions of Nonferrous Metals Society of China

DOI

2012

Dry sliding wear behaviour of Mg–10Gd–3Y–0.4Zr alloy

Maoliang Hu, Qudong Wang, Changjiang Chen, Dongdi Yin, Wenjiang Ding, Zesheng Ji

Materials & Design (1980-2015)

DOI

2011

Al-Si-Cu压铸铝合金的耐腐蚀性能

张莉，王渠东，胡茂良，丁文江

《特种铸造及有色合金》

2011

新型钛-硼晶粒细化剂对ADC12铝合金组织和性能的影响

胡茂良，吉泽升，张忠凯，张盛田

《轻合金加工技术》

2011

热挤压AZ91D镁合金边角料组织和性能的研究

胡茂良，吉泽升，陈晓瑜，王渠东

《材料工程》

2011

固相再生AZ91D镁合金边角料的低温力学性能(英文)

李冬华，胡茂良，王海波，赵望安

Transactions of Nonferrous Metals Society of China

2011

Evolution of the semi-solid microstructure of ADC12 alloy in a modified SIMA process

Zhenyu Wang, Zesheng Ji, Maoliang Hu, Hongyu Xu

Materials Characterization

DOI

2011

Low temperature mechanical property of AZ91D magnesium alloy fabricated by solid recycling process from recycled scraps

Donghua Li, Maoliang Hu, Haibo Wang, Wang-an ZHAO

Transactions of Nonferrous Metals Society of China

DOI

2010

Microstructure and mechanical properties of AZ31B magnesium alloy prepared by solid-state recycling process from chips

Shuyan Wu, Zesheng Ji, Shoufan Rong, Maoliang Hu

Transactions of Nonferrous Metals Society of China

DOI

2010

Effect of extrusion ratio on microstructure and mechanical properties of AZ91D magnesium alloy recycled from scraps by hot extrusion

Maoliang Hu, Zesheng Ji, Xiaoyu Chen

Transactions of Nonferrous Metals Society of China

DOI

2010

Microstructure of AZ91D magnesium alloy semi-solid billets prepared by SIMA method from chips

Hongyu Xu, Zesheng Ji, Maoliang Hu, Zhenyu Wang

Transactions of Nonferrous Metals Society of China

DOI

2008

固相再生AZ91D镁合金组织结构及性能研究

胡茂良

《哈尔滨理工大学》

2007

镁合金固相合成和回收的研究进展

陈晓瑜，吉泽升，胡茂良

《轻合金加工技术》

2007

Formation process of AZ31B semi-solid microstructures through strain-induced melt activation method

Zesheng Ji, Maoliang Hu, Sumio Sugiyama, Jun Yanagimoto

Materials Characterization

DOI

2007

Effect of chip size on mechanical property and microstructure of AZ91D magnesium alloy prepared by solid state recycling

Maoliang Hu, Zesheng Ji, Xiaoyu Chen, Zhenkao Zhang

Materials Characterization

DOI

2007

Development and prospect of solid-state recycling by hot extrusion from magnesium alloy machined chips

Maoliang Hu

Light Alloy Fabrication Technology

2006

挤压铸造工艺对汽车空调器摇盘组织和性能的影响

胡茂良，赵密，吉泽升，孙光滨，朴永吉

《中国有色金属学报》

2006

固相合成AZ91D镁合金的组织和性能

吉泽升，陈晓瑜，胡茂良，S.Sumio，杨续跃

《中国有色金属学报》

2006

Effect of squeezing casting technology on structures and properties of air-conditioner swaying tray of automobile

Maoliang Hu

2005

冷轧工艺对1050H19空调箔微观结构及深冲性能的影响

吉泽升，王涛，胡茂良，Yanagimoto Jun，Sigiyama Sumio

《中国有色金属学报》

2005

汽车空调器摇盘挤压铸造模具设计及工艺研究

胡茂良，赵密，吉泽升，朴永吉，孙光滨

《特种铸造及有色合金》

DOI

2004

镁基复合材料国内外研究现状及展望

胡茂良，吉泽升，宋润宾，郑小平

《轻合金加工技术》

精选作品

期刊论文

微量稀土Y对AlCrMo0.5NbV体系难熔高熵合金组织和性能的影响

AZ91D镁合金差速器支架近液相线挤压铸造浇排系统优化

Enhanced corrosion resistance of A356 aluminum alloy via shot peening surface modification

Synergistic grain refinement of Al-Si alloys: Ce-driven interfacial electronic reconstruction and temperature-tailored V2Al20Ce/VB2 evolution

High Wear-resistant APC/7075Al composites fabricated via hydrothermal carbonization coating of powders and vacuum hot-press sintering

Tailoring intermetallic anisotropy in AZ91 alloy via Y/La co-addition: A dual-site occupancy mechanism

Thermal conductivity variation of ADC12 alloy driven by microstructure characteristics

First-principles study of intermetallic compounds in Al–Si alloys: electronic structure and thermal transport properties

Atomic-scale interfacial engineering of MgAl2O4 in GdB2C2/6061Al composites for synergistic enhancement of strength-ductility and neutron shielding performance

A novel neutron-shielding GdB6/7075Al composite with MgO-modified interface for spent fuel containment applications

Recycling of Al/Ti machining chips into a novel Al–5Ti–0.25C–4Sr master alloy for synergistic refinement and modification of A356 alloy

The Effect of Al Content on the Microstructure and Mechanical Properties of Mg-6Gd-3Y Alloy

Deep cryogenic rolling-induced microstructural evolution and simultaneous enhancement of mechanical properties and electrical conductivity in Al-Mg-Si-0.2La alloy

Simultaneously improving thermal conductivity and mechanical properties of Al-Si alloys: Based on the influence of microscopic defects and second phase

Effect of ADC12/A356 alloy chips mixing ratio on microstructure and properties of solid-state recycled aluminum alloys

Microstructural Evolution and Simultaneous Enhancement of Mechanical and Tribological Properties in Low‐Mass‐Fraction B 4 C/7075 Al Composites

再生屑料制备Al-Ti-B-Ce晶粒细化剂及其细化效果

Synergistic strengthening-toughening of in-situ (TiAl3+TiC)/Al composites via TiAl3 fragmentation and TiC-induced α-Al grain refinement

Effects of Semi-Solid Isothermal Heat Treatment on the Tribological Behavior of Al-15%Mg2Si-5%TiB2 Composites

Insights into the strengthening mechanism of L12-TiAl3/Al (010) interfaces from first-principles calculations

Newly discovered members of TiAl3 morphology and their growth theories

Effect of hydrothermal temperature on microstructure, mechanical and tribological properties of APC/A6061 laminated composites fabricated via HTCAP-VHPS process

Interface Structure and Strengthening Mechanism of AZ91 Alloy Reinforced by MgO-Coated Graphene Nanoplatelets

Effect of La content on microstructure, tensile properties, and electrical conductivity of cast Al-Mg-Si-xLa alloys

Population dynamics behaviors of TiC and their effect on grain refinement in Al–Ti–C refiners: Growth, agglomeration, nucleation and precipitation

浇注温度对近液相线挤压铸造AZ91D镁合金组织及性能的影响

添加碳粉对AZ91镁合金微观组织与力学性能的影响

铝板水热碳吸附工艺制备APC/Al层状复合材料的显微组织、力学性能和摩擦学性能（英文）

La/Nd比对AZ91-RE合金显微组织和拉伸性能的影响（英文）

Mechanism of Iron-rich Compound Modification and Purification in Recycled AlSi10MgFe Alloy with Manganese

Refining mechanism of primary Mg2Si and wear resistance in Al-15 %Mg2Si composites by TiB2 particles addition

Evolution of (Ti, V) Compounds in the Al-Ti-V-B System and the Refinement Performance Thereof

Study on hot deformation behavior and dynamic recrystallization mechanism of recycled Al–Zn–Mg–Cu alloy

Microstructural evolution mechanism and mechanical properties of La and Gd on AZ91 alloy: Experiments and first-principles calculations

First-principles study of Ti adsorption on Al4C3 (0001) surface

Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg–Al–Zn Alloy Prepared by Solid‐State Recycling of Mixed Waste Chips

Effect of the TiB2 content on the mechanical and tribological properties of TiB2/AZ91 composites fabricated by vacuum hot-press sintering process incorporating vacuum ball milling

Effect of La/Nd ratio on microstructure and tensile properties of AZ91-RE alloys

Solid-State Synthesis of SiC Particle-Reinforced AZ91D Composites: Microstructure and Reinforcement Mechanisms

Efficient modification eutectic Si of Al-10Si alloy with Mg-Gd master alloy addition

Microstructure, mechanical and tribological properties of APC/Al laminated composites prepared by hydrothermal carbon adsorption on plates

Al对AlxMo0.5NbTiVSi0.2高熵合金组织和性能影响

废料回炉比对AlSi10MgFe合金组织及性能的影响

复杂结构ADC12铝合金汽车支架挤压铸造工艺参数优化

Effect of modification and subsequent heat treatment on thermal and mechanical properties of near-eutectic Al-Si-Fe-Mg alloys

Effect of Cryorolling on Microstructure, Conductivities, and Mechanical Properties of a Cast Near-Eutectic Al-Si-Fe-Mg Alloy

A Novel Al-Ti-C-B-Ce Alloy Preparation Process and Its Refinement Effect to A356 Alloy

Study of Microstructure and Mechanical Properties of Short Carbon Fibers Reinforced Mg Matrix Composites Fabricated by Hot Extrusion

Synthesis of Al-5Ti-1B-1Ce alloy from remelted chips and its refinement effect

Design a novel APC/A6061 laminated composite with high wear resistance

Comparison between spark plasma sintering and hot extrusion for solid-state recycling of Al-Si-Cu-Fe alloy chips

Effect of Near-Liquidus Squeeze Casting Pressure on Microstructure and Mechanical Property of AZ91D Alloy Differential Support

Effect of high pressure on solidification microstructure evolution of near-eutectic Al-11.5Si-0.5Fe-0.2 Mg alloy

Effect of aging treatment on properties of Al–Si alloy solidified at high-pressure

大壁厚差铝合金发动机支架挤压铸造工艺优化

Effect of CeO2 on Al–Ti–C and matrix conversion between TiC and α-Al orientation relationship

Effect of La/Nd ratio on precipitation kinetics and tensile properties of squeeze-cast Mg-Al-Zn-La-Nd alloys

Design and preparation of aluminum alloy with high thermal conductivity based on CALPHAD and first-principles calculation

Microstructure of Al–Ti–C master alloy triggered by rare-earth Ce

Erratum: Effect of isothermal process parameters on semi-solid microstructure of chip-based Al–Cu–Mn–Ti alloy prepared by SIMA method

Effect of La/Nd Ratio on the Microstructure and Corrosion Behaviors of Squeeze-Cast Mg–Al–Zn–La–Nd Alloys

Influence of trace amount chromium on microstructure and corrosion behavior of A356-5vol.%TiB2 alloy

挤压铸件不同部位和壁厚的组织及溶质分布

Al-5Ti-0.25C合金制备工艺及其细化效果研究

Microstructure evolution, thermal conductivity and mechanical properties of hot-rolling Al–Si–Fe–Mg alloy under different reductions

Preparation Process and Phase Transformation of Al-5Ti-0.25C Master Alloy Adopting Ti Machining Chips

Microstructure, mechanical and tribological properties of (APC+B4C)/Al hybrid composites prepared by hydrothermal carbonized deposition on chips

Fabrication of Al–Ti–B Grain Refiner Using Machining Ti Chips, Reaction Mechanisms and Grain Refinement Performance in Pure Al

Microstructure and mechanical properties of AlCrFeCoNi high-entropy alloy particle reinforced Mg-9Al-1Zn matrix composites

Simulations of Multiple Grains Growth of Mg–Al Alloy Semisolid Structure by Phase-Field-Lattice Boltzmann Simulation

Fabrication of Al-5Ti-1B master alloy using machining Ti chips and dissolution kinetics of Ti chips

钛屑再生制备Al-Ti-B细化剂及其晶粒细化行为的研究

Dynamic recrystallization behavior and mechanical properties of bimodal scale Al2O3 reinforced AZ31 composites by soild state synthesis

Effect of glucose concentrations on wear resistance of Al/APC composites prepared by hydrothermal carbonized deposition on chips

Effect of isothermal process parameters on semi-solid microstructure of chip-based Al–Cu–Mn–Ti alloy prepared by SIMA method

Evaluation of stabilities and thermophysical properties of Si-Sr intermetallics based on first-principles analysis

Effect of stirring rate on grain morphology of Mg-Al alloy semi-solid structure by phase field lattice Boltzmann simulation

Effect of short carbon fiber content on SCFs/AZ31 composite microstructure and mechanical properties