柴天佑

期刊论文

1. 郭策，张亚军，贾瑶，郑锐，柴天佑（2026）. 复杂给矿过程信号补偿法驱动的智能PI控制. 《控制理论与应用》.
2. 黄晓迪，王广博，李前胜，姜彦辰，王永富，柴天佑（2026）. 面向分段计划负荷的耦合配烧优化模型与硫分约束界调整. 《自动化学报》.
3. 孙洪硕，张亚军，刘宁，郭策，柴天佑，张金强（2026）. 数据驱动的非线性系统混合智能建模方法. 《控制理论与应用》.
4. 李玉超，赵亮，贾瑶，张亚军，柴天佑（2026）. 端边云协同的苛性比值智能预报方法. 《控制工程》.DOI
5. 洪宇，周平，姜午恺，柴天佑（2026）. CDIM:一种基于视觉转换器与无监督域适应的跨域工况识别方法. 《中国科学:信息科学》.
6. Ning Liu, Yajun Zhang, Yousheng Li, Hongwei Liu, Zhuqing Wang, Zhenfei Xiao, Tianyou Chai (2026). Data-driven anti-windup adaptive PID control without persistent excitation. Control Engineering Practice.DOI
7. Shengbo Hong, Wen Yu, Tianyou Chai (2026). Interactive explainability in data-driven modeling: A neural-network-centric survey. Neurocomputing.DOI
8. Yaxin Wang, Danwei Zhang, Han‐Xiong Li, Tianyou Chai (2026). Adaptive Sensor Fault-Tolerant Control for Distributed Parameter Systems. IEEE Transactions on Cybernetics.DOI
9. Meng Yuan, Ye Wang, Chris G. Manzie, Zhezhuang Xu, Tianyou Chai (2026). Contouring Error-Bounded Control for Biaxial Switched Linear Systems. IEEE Transactions on Systems Man and Cybernetics Systems.DOI
10. Danya Xu, Mingwei Jia, Tao Chen, Yi Liu, Dongyue Chen, Tianyou Chai, Tao Yang (2026). Federated Open-Set Fault Diagnosis for Unknown Bearing Fault Detection. Mechanical Systems and Signal Processing.DOI
11. Rui Gao, Guang‐Hong Yang, Tianyou Chai (2026). Quality evaluation-based resilient distributed state estimation over time-varying networks via multi-hop communication. Automatica.DOI
12. Bo Peng, Huiyuan Shi, Tianyou Chai, Chengli Su, Ping Li (2026). Improved Predictive Functional Control Based on Unmodeled Dynamics Compensation for Ethylene Cracking Furnace. IEEE Transactions on Industrial Electronics.DOI
13. Haixiu Xie, Jin‐Xi Zhang, Tianyou Chai, Zhongmei Li (2026). Distributed Robust Output-Constrained Control of Unknown Nonlinear Multiagent Systems Under Switching Topologies. IEEE Transactions on Signal and Information Processing over Networks.DOI
14. Hongwei Liu, Ning Liu, Wen Yu, Xiaoou Li, Yuan Li, Yao Jia, Tianyou Chai (2026). PID-Optimized Deep Learning for Adaptive Time–Frequency Forecasting in Dynamic Systems: Coal Calorific Value Prediction. IEEE Transactions on Cybernetics.DOI
15. Sungwook HONG, Wen Yu, Tianyou Chai (2026). Data-Driven Hierarchical Decision-Making Modeling for Complex Industrial Processes. IEEE Transactions on Automation Science and Engineering.DOI
16. Yousheng Li, Wen Yu, Xiaoou Li, Hongwei Liu, Yao Jia, Tianyou Chai (2026). Trend-Aware Dynamic Fusion of Regression and Classification for Supernatant Interface Prediction in Industrial Thickening Systems. IEEE/ASME Transactions on Mechatronics.DOI
17. Sitong Liu, Masoud Davari, Weinan Gao, Omar Qasem, Tianyou Chai (2026). Adaptive Optimal Output Regulation Based on Adaptive Dynamic Programming and Output-Feedback Hybrid Iteration: Theory and Applications Across Diverse Time Scales From PMDC Motor Drives to IBR-Based Microgrids. IEEE Transactions on Industrial Electronics.DOI
18. Ce Guo, Yajun Zhang, Rui Zheng, Yao Jia, Ning Liu, Tianyou Chai (2026). Signal-Compensated PI Control Based on Concurrent-Learning-Driven Optimal Tuning Parameters for Complex Ore Feeding Processes. IEEE/ASME Transactions on Mechatronics.DOI
19. Xiao-Ke Tong, Jin‐Xi Zhang, Tianyou Chai (2026). Fault-Tolerant Prescribed Performance Control of Block-Triangular Nonlinear Systems With Coupled Sensor Faults. IEEE Transactions on Industrial Electronics.DOI
20. Meng Yuan, Tianyou Chai (2026). Contouring Error Bounded Control for Biaxial Systems With Structural Flexibility and Input Delay. IEEE Transactions on Industrial Electronics.DOI
21. 柴天佑，郑锐，贾瑶，黄新宇，宋延杰（2025）. 软件定义智能控制系统未来发展展望. 《东北大学学报(自然科学版)》.
22. 孙洪硕，张丹威，徐泉，柴天佑（2025）. 参数寻优自适应重构特征的高压辊磨机运行故障诊断. 《东北大学学报(自然科学版)》.
23. 孙洪硕，张亚军，刘宁，郭策，柴天佑，张金强（2025）. 基于信号补偿与强化学习的赤铁矿再磨压力智能PI控制. 《控制与决策》.
24. 柴天佑，郑锐，贾瑶，黄新宇，郑秀萍，李智（2025）. 软件定义智能控制系统. 《自动化学报》.
25. 柴天佑，郑锐，邢方新，贾瑶，郑秀萍（2025）. 工业过程控制智能化及未来发展展望. 《中国科学:信息科学》.
26. Weinan Gao, Nairong Qiao, Tianyou Chai (2025). String-Stable Controller Design for Nonlinear Vehicular Platoons. 《第36届中国过程控制会议论文集（下）》.DOI
27. 朱国瑞，朱景安，李远征，杨涛，曾志刚，柴天佑（2025）. 高比例新能源供电工业园区生产-供能一体化调度研究. 《中国科学:技术科学》.
28. 柴天佑（2025）. 工业智能：工业绿色化转型的变革性技术. 《中国工业和信息化》.DOI
29. Kunpeng Zhang, Lei Xu, Xinlei Yi, Ming Cao, Karl Henrik Johansson, Tianyou Chai, Tao Yang (2025). Distributed Constrained Online Nonconvex Optimization with Compressed Communication. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
30. Si Wu, Tengfei Liu, Jinliang Ding, Yuzhe Li, Tianyou Chai, Zhong‐Ping Jiang (2025). Safe Output-Feedback Control for a Class of Linear Systems with Multiple Output Constraints. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
31. Sungwook HONG, Wen Yu, Tianyou Chai (2025). A Human-in-the-Loop Framework for Interactive and Explainable Data-Driven Modeling. IEEE Transactions on Emerging Topics in Computational Intelligence.DOI
32. Yuxiang Hu, Shaowen Lu, Chaozhong Guo, Jihong Yan, Bin Jiang, Tianyou Chai (2025). Detection and Identification of Sensor and Actuator Faults in Multiagent Systems: An Attack-Immune Sensor/Actuator Fault Decoupling Observer. IEEE Transactions on Reliability.DOI
33. Xianyao Han, Wen Yu, Yao Jia, Tianyou Chai (2025). Multirate Industrial Process Forecasting With Hybrid Deep Learning and Adaptive Filtering. IEEE Transactions on Neural Networks and Learning Systems.DOI
34. Yuxiang Hu, Xuewu Dai, Jinliang Ding, Tianyou Chai (2025). Fixed-Time Sensor Fault Detection Observer With Actuator Fault Decoupling for Attack-Free Consensus Systems. IEEE Transactions on Control of Network Systems.DOI
35. Hanyuan Jiang, Long Bai, Tao Yang, Tianyou Chai (2025). Intelligent fault diagnosis method for bearings based on WSVM-CNN. Journal of Control and Decision.DOI
36. Jiajun Kang, Xuewu Dai, Yuxiang Hu, Peng Yue, Hui Zhao, Dongliang Cui, Tianyou Chai (2025). Iterative Learning Model Predictive Control for Robust Rescheduling of Intercity Express Trains. IEEE Transactions on Intelligent Transportation Systems.DOI
37. Kai-Di Xu, Jin‐Xi Zhang, Tianyou Chai, Zhongmei Li (2025). Low-Complexity Fault-Tolerant Prescribed Performance Control of Unknown Nonlinear Systems With Deferred Actuator Replacement. IEEE Transactions on Systems Man and Cybernetics Systems.DOI
38. Cui Wei, Zhengyi Li, Ye‐Hwa Chen, Jun Hui Fu, Tianyou Chai (2025). Dyadic Control for Formation Maintenance and Collision Avoidance in Cooperative Road Transportation Systems. IEEE Transactions on Intelligent Transportation Systems.DOI
39. Jie Huang, Gaochang Wu, Jingxin Zhang, Tianyou Chai (2025). Edge-Aware Transformer for Adhesion Object Segmentation in XRT-Based Ore Presorting. IEEE/ASME Transactions on Mechatronics.DOI
40. Kunpeng Zhang, Lei Xu, Xinlei Yi, Guanghui Wen, Lihua Xie, Tianyou Chai, Tao Yang (2025). One-Point Sampling for Distributed Bandit Convex Optimization With Time-Varying Constraints. IEEE Transactions on Control of Network Systems.DOI
41. Xiaoyang Sun, Ping Zhou, Tianyou Chai (2025). Entropy optimization based linear compensation for performance enhancement of NMPC and its applications. Journal of the Franklin Institute.DOI
42. Tianyou Chai, Siyu Cheng (2025). Intelligent Operational Decision-Making in Industrial Process: Development and Prospects. Engineering.DOI
43. Haixiu Xie, Jin‐Xi Zhang, Tianyou Chai (2025). Adaptive tracking control of uncertain strict-feedback systems with tight self-adjustable performance guarantees. Science China Information Sciences.DOI
44. Suting Gao, Wen Yu, Tianyou Chai (2025). A Novel Semisupervised Approach for Caustic Concentration Prediction in Alumina Production. IEEE Transactions on Industrial Informatics.DOI
45. Jin-Zi Yang, Jin‐Xi Zhang, Tianyou Chai (2025). Prescribed Performance Control of Nonlinear Systems With Unknown Sign-Switching Virtual Control Coefficients. IEEE/CAA Journal of Automatica Sinica.DOI
46. Yi Jiang, Tao Yang, Weinan Gao, Jin Chu Wu, Tianyou Chai, Frank L. Lewis (2025). Off-Policy Reinforcement Learning for $H_\infty$ Control of Linear Discrete-Time Systems With Network-Induced Dropouts. IEEE Transactions on Automatic Control.DOI
47. Xue Liang, Weinan Gao, Chuan Hu, Tianyou Chai (2025). Cooperative Adaptive Cruise Control of Connected and Autonomous Vehicles via Hybrid Iteration. IEEE Transactions on Vehicular Technology.DOI
48. Tianyou Chai, Fangxin Xing, Rui Zheng, Yao Jia, Yanjie Song (2025). An Anti-Latency Intelligent Control for 5G Wireless Networks Based on End-Edge-Cloud Collaboration. IEEE Journal on Selected Areas in Communications.DOI
49. Haixiu Xie, Jin‐Xi Zhang, Tianyou Chai (2025). Low-Complexity Distributed Prescribed Performance Control of Unknown Nonlinear Multiagent Systems Under Switching Topologies. IEEE Transactions on Cybernetics.DOI
50. Guorui Zhu, Jingan Zhu, Yuanzheng Li, Tao Yang, Zhigang Zeng, Tianyou Chai (2025). Integrated production-energy dispatch in renewable-rich industrial parks. Scientia Sinica Technologica.DOI
51. Rui Gao, Tianyou Chai (2025). A Decomposition-Based Approach to Byzantine-Resilient Distributed State Estimation. Chinese Control and Decision Conference (CCDC).DOI
52. Kunpeng Zhang, Xinlei Yi, Guanghui Wen, Ming Cao, Karl Henrik Johansson, Tianyou Chai, Tao Yang (2025). Distributed Event-Triggered Bandit Convex Optimization With Time-Varying Constraints. IEEE Transactions on Control of Network Systems.DOI
53. Jin-Zi Yang, Jin‐Xi Zhang, Tianyou Chai (2025). Output-Feedback Proportional-Integral Fuzzy Control of Unknown Nonlinear Systems With Prescribed Performance. IEEE Transactions on Fuzzy Systems.DOI
54. Lei Xu, Xinlei Yi, Yang Shi, Karl Henrik Johansson, Tianyou Chai, Tao Yang (2025). Distributed Optimization With Compressed Communication. Elsevier eBooks.DOI
55. Ning Liu, Tianyou Chai, Yajun Zhang, Weinan Gao (2025). Data-driven optimal tuning of PID controller parameters. Science China Information Sciences.DOI
56. Jin‐Xi Zhang, Jinliang Ding, Tianyou Chai (2025). Cyclic Performance Monitoring-Based Fault-Tolerant Funnel Control of Unknown Nonlinear Systems With Actuator Failures. IEEE Transactions on Automatic Control.DOI
57. Yuxiang Hu, Xuewu Dai, Peng Yue, Jinliang Ding, Tianyou Chai (2025). OD-TGCN: An Observer-Driven Temporal Graph Convolutional Network for Early Fault Detection of Control Systems. IEEE Transactions on Circuits and Systems I Regular Papers.DOI
58. Xinlei Yi, Xiuxian Li, Tao Yang, Lihua Xie, Yiguang Hong, Tianyou Chai, Karl Henrik Johansson (2025). Distributed Online Convex Optimization With Time-Varying Constraints: Tighter Cumulative Constraint Violation Bounds Under Slater's Condition. IEEE Transactions on Automatic Control.DOI
59. Qiang Liu, Li Hua Wen, Gaochang Wu, Tianyou Chai, S. Joe Qin (2025). Data-Driven Closed-Loop Process Fault Diagnosis With Enhanced Fault Dynamics. IEEE Transactions on Industrial Electronics.DOI
60. Benyi Jiang, Ping Zhou, Xiaoyang Sun, Tianyou Chai (2025). Intelligent recognition of steel plate surface defect based on deep convolutional GAN. Neural Computing and Applications.DOI
61. Yu Zhang, Ping Zhou, Ruiyao Zhang, Shaowen Lu, Tianyou Chai (2025). Semi-supervised concept drift detection and adaptation based on conformal martingale framework. Journal of Process Control.DOI
62. Lei Xu, Danya Xu, Xinlei Yi, Chao Deng, Tianyou Chai, Tao Yang (2025). Decentralized Federated Learning Algorithm Under Adversary Eavesdropping. IEEE/CAA Journal of Automatica Sinica.DOI
63. Weinan Gao, Zhong‐Ping Jiang, Tianyou Chai (2025). Resilient Control Under Denial-of-Service and Uncertainty: An Adaptive Dynamic Programming Approach. IEEE Transactions on Automatic Control.DOI
64. Jin‐Xi Zhang, Yun-Qi Liu, Tianyou Chai (2025). Singularity-Free Low-Complexity Fault-Tolerant Prescribed Performance Control for Spacecraft Attitude Stabilization. IEEE Transactions on Automation Science and Engineering.DOI
65. Jin‐Xi Zhang, Wei-Li Qi, Tianyou Chai (2025). Constrained Tracking Control of MIMO Nonlinear Systems With Discontinuous References and Unknown Dynamics. IEEE Transactions on Automation Science and Engineering.DOI
66. Liyi Yu, Wen Yu, Yao Jia, Tianyou Chai (2025). Real-Time Caustic Ratio Prediction in Alumina Digestion Process for Closed-Loop Operation: A Cloud-Edge Deep Learning Approach. IEEE Transactions on Automation Science and Engineering.DOI
67. Danwei Zhang, Wen Yu, Quan Xu, Tianyou Chai (2025). Spatio-Temporal Attention Adversarial Autoencoders for Enhanced Anomaly Detection in High-Pressure Grinding Rolls. IEEE Transactions on Industrial Informatics.DOI
68. Guojie Li, Ping Zhou, Yuyang Zhou, Tianyou Chai (2025). Virtual Error-Based Data-Driven P-Type Adaptive Predictive Control and Its Applications. IEEE Transactions on Automation Science and Engineering.DOI
69. Ping Zhou, Benyi Jiang, Yu Zhang, Tianyou Chai (2025). Intelligent Working Conditions Recognition Method and Application Incorporating Semi-Supervised Learning With Multilevel Information Fusion. IEEE Transactions on Instrumentation and Measurement.DOI
70. Yuying Wang, Ping Zhou, Tianyou Chai (2025). An Adaptive Auxiliary Phase Switching Multi-Task Collaborative Constrained Multi-Objective Optimization Algorithm. IEEE Transactions on Evolutionary Computation.DOI
71. 肖振飞，刘宁，张亚军，柴天佑（2024）. 基于参数优化和补偿信号的非线性广义预测控制方法. 《中国科学:信息科学》.
72. 张晋熙，柴天佑，王良勇（2024）. 时延非线性系统无模型预设性能控制. 《自动化学报》.DOI
73. 柴天佑（2024）. 工业智能助力实现“双碳”目标. 《中国科学基金》.
74. 柴天佑，钱锋，管晓宏，丁进良，堵威，徐占伯，杨涛，刘克，何杰，宋苏，赵瑞珍，王志衡，刘屿（2024）. 面向双碳目标的自动化和智能化理论与技术. 《中国科学基金》.
75. Li-Yi Yu, Wen Yu, Si-Yu Cheng, Yao Jia, Tianyou Chai (2024). Real-Time Caustic Ratio Control in Alumina Digestion Using Deep Reinforcement Learning. 2024 6th International Conference on Industrial Artificial Intelligence (IAI).DOI
76. Yapeng Zhang, Gao-Chang Wu, Tianyou Chai (2024). Large-Scale Pre-Training Improves Anomaly Detection in Fused Magnesium Smelting Process. 2024 6th International Conference on Industrial Artificial Intelligence (IAI).DOI
77. Jin‐Xi Zhang, Tianyou Chai (2024). Fault-tolerant control of wheeled mobile robots with prescribed trajectory tracking performance. Journal of Automation and Intelligence.DOI
78. Liyi Yu, Wen Yu, Jia Yao, Tianyou Chai (2024). Intelligent operational control method integrating human expertise and real-time data for alumina digestion process. Control Engineering Practice.DOI
79. Ping Zhou, Peng Zhao, Zihui Ou, Tianyou Chai (2024). Stacked semi-supervised autoencoder-regularized RVFLNs for reliable prediction of molten iron quality in blast furnace. Neural Computing and Applications.DOI
80. Danwei Zhang, Hongshuo Sun, Wen Yu, Quan Xu, Tianyou Chai (2024). A Coattention Enhanced Multimodal Feature Fusion With Inner Feature for Anomaly Detection. IEEE/ASME Transactions on Mechatronics.DOI
81. Liyi Yu, Wen Yu, Yao Jia, Tianyou Chai (2024). Deep Learning Framework for Collaborative Variable Time Delay Estimation and Uncertainty Quantification in Industrial Quality Prediction. IEEE Transactions on Industrial Informatics.DOI
82. Amir Afshari, Mohammad Raeispour, Masoud Davari, Weinan Gao, Frede Blaabjerg, Tianyou Chai (2024). Finite-Rate Distributed Secondary Control Over Digital Communication Networks Using an Event-Triggered Quantized Algorithm for Islanded Modern Microgrids Utilizing Inverter-Based Resources. IEEE Transactions on Industrial Informatics.DOI
83. Danya Xu, Yi Liu, Guanghui Wen, Yaochu Jin, Tianyou Chai, Tao Yang (2024). DeFedTL: A Decentralized Federated Transfer Learning Method for Fault Diagnosis. IEEE Transactions on Industrial Informatics.DOI
84. Suting Gao, Wen Yu, Tianyou Chai (2024). Semi-Supervised Caustic Concentration Prediction in Alumina Production with Transformers. Proceedings of the Annual Conference of the IEEE Industrial Electronics Society.DOI
85. Shengbo Hong, Wen Yu, Yingqin Zhu, Tianyou Chai, Qingda Chen, Yao Jia (2024). Evolving Neural Networks for Bi-Level Human Decision-Making Prediction in Mineral Processing. Proceedings of the Annual Conference of the IEEE Industrial Electronics Society.DOI
86. Weinan Gao, Tianyou Chai, Nairong Qiao, Yiheng Liu (2024). String Stable Platooning Control based on Adaptive Dynamic Programming. CAA International Conference on Vehicular Control and Intelligence (CVCI).DOI
87. Kesheng Zhang, Wen Yu, Tianyou Chai (2024). Dual-Scale Attributed Graph Transformer for Extracting Spatial-Temporal Features With Applications in Quality Index Prediction. IEEE Transactions on Emerging Topics in Computational Intelligence.DOI
88. Jinna Li, Lin Yuan, Weiran Cheng, Tianyou Chai, Frank L. Lewis (2024). Reinforcement Learning for Synchronization of Heterogeneous Multiagent Systems by Improved Q -Functions. IEEE Transactions on Cybernetics.DOI
89. Jin‐Xi Zhang, Tianyou Chai (2024). Robust Prescribed Performance Control of Nonlinear Systems With Unknown Odd Powers. IEEE Transactions on Cybernetics.DOI
90. Masoud Davari, Jianguo Zhao, Chunyu Yang, Weinan Gao, Tianyou Chai (2024). Reinforcement Learning to Stabilize Singularly Perturbed DC-Side Dynamics of Grid-Connected Voltage-Source Converters in Modern AC–DC Grids Using Singular Perturbation Theory and Adaptive Dynamic Programming. IEEE Transactions on Industrial Electronics.DOI
91. Jin‐Xi Zhang, Tianyou Chai (2024). Robust Tracking Control of Unknown Nonlinear Systems With Discontinuous References Under Output Constraints. IEEE Transactions on Systems Man and Cybernetics Systems.DOI
92. Jin‐Xi Zhang, Enyuan Cui, Tianyou Chai (2024). Robust Fault-Tolerant Dynamic Positioning of Marine Surface Vessels With Prescribed Performance. IEEE Transactions on Intelligent Transportation Systems.DOI
93. Jiayue Sun, Zhiming Xu, Huaguang Zhang, Tianyou Chai, Shiyang Wang (2024). Adaptive Distributed Control of Nonlinear Multiagent Systems With Event-Triggered for Communication Faults and Dead-Zone Inputs. IEEE Transactions on Cybernetics.DOI
94. Yi Jiang, Tianyou Chai, Guanrong Chen (2024). Output Feedback-Based Adaptive Optimal Output Regulation for Continuous-Time Strict-Feedback Nonlinear Systems. IEEE Transactions on Automatic Control.DOI
95. Jin-Zi Yang, Jin‐Xi Zhang, Tianyou Chai (2024). Low-Complexity Decentralized Output-Feedback Fault-Tolerant Control of General Unknown Interconnected Nonlinear Systems. IEEE Transactions on Automation Science and Engineering.DOI
96. Weinan Gao, Zhong-Ping Jiang, Tianyou Chai (2024). Bridging the Gap Between Reinforcement Learning and Nonlinear Output-Feedback Control. 《第43届中国控制会议论文集（5）》.DOI
97. Zeli Zhao, Jinliang Ding, Jin‐Xi Zhang, Yang Shi, Tianyou Chai (2024). Distributed Optimal Resource Allocation for High-Order Nonlinear Multiagent Systems Over Unbalanced Digraphs. IEEE Transactions on Control of Network Systems.DOI
98. Xianyao Han, Wen Yu, Yao Jia, Tianyou Chai (2024). Feed Concentration Forecasting Using Closed-Loop Input Error and Deep Learning. IEEE Transactions on Industrial Informatics.DOI
99. Kesheng Zhang, Wen Yu, Yao Jia, Tianyou Chai (2024). Comprehensive Production Index Prediction Using Dual-Scale Deep Learning in Mineral Processing. IEEE Transactions on Neural Networks and Learning Systems.DOI
100. Wenqian Xue, Bosen Lian, Yusuf Kartal, Jialu Fan, Tianyou Chai, Frank L. Lewis (2024). Model-Free Inverse H-Infinity Control for Imitation Learning. IEEE Transactions on Automation Science and Engineering.DOI
101. Zhian Jia, Dongliang Cui, Xuewu Dai, Zhi‐Wei Liu, Shuxin Liu, Tianyou Chai (2024). Low Overhead Minimum Variance Time Synchronization for Time-Sensitive Wireless Sensor Networks. IEEE Transactions on Automation Science and Engineering.DOI
102. Ran Chen, Yuzhe Li, Tianyou Chai (2024). Multi-Objective Derivative-Free Optimization Based on Hessian-Aware Gaussian Smoothing Method.DOI
103. Lei Xu, Xinlei Yi, Jiayue Sun, Guanghui Wen, Tianyou Chai, Tao Yang (2024). Compressed Distributed Zeroth-Order Gradient Tracking for Nonconvex Optimization.DOI
104. Kunpeng Zhang, Xinlei Yi, Yuzhe Li, Ming Cao, Tianyou Chai, Tao Yang (2024). Distributed online constrained convex optimization with event-triggered communication. European Journal of Control.DOI
105. Cui Wei, Ye‐Hwa Chen, Tianyou Chai, Jun Hui Fu (2024). Agile Formation Control for Intelligent Swarm Systems With Guaranteed Collision Avoidance. IEEE Transactions on Intelligent Transportation Systems.DOI
106. Tianyou Chai, Zheng Zhou, Siyu Cheng, Yao Jia, Yanjie Song (2024). Industrial Metaverse-Based Intelligent PID Optimal Tuning System for Complex Industrial Processes. IEEE Transactions on Cybernetics.DOI
107. Huan Li, Jun Hui Fu, Tianyou Chai (2024). Hybrid Intelligent Optimization of Nonlinear Switched Systems With Guaranteed Feasibility. IEEE Transactions on Artificial Intelligence.DOI
108. Jun Hui Fu, Yanhui Liu, Rolf Findeisen, Tianyou Chai (2024). Model Predictive Control With Guaranteed Feasibility of Inequality Path Constraints. IEEE Transactions on Cybernetics.DOI
109. Jiajun Kang, Dongliang Cui, Xuewu Dai, Hui Zhao, Yuxiang Hu, Tianyou Chai (2024). State-Space Modeling and Feedback Control for Real-Time Automatic Train Timetable Rescheduling of Intercity HSRs. IEEE Transactions on Intelligent Transportation Systems.DOI
110. Haofeng Wu, Qingda Chen, Jiaxin Chen, Yaochu Jin, Jinliang Ding, Xingyi Zhang, Tianyou Chai (2024). A Multistage Expensive Constrained Multiobjective Optimization Algorithm Based on Ensemble Infill Criterion. IEEE Transactions on Evolutionary Computation.DOI
111. Tongkang Zhang, Jinliang Ding, Cheng Zeng, Kaifeng Guan, Ye Liu, Chunhui Zhao, Tianyou Chai (2024). iHPPPVis: Interactive Visual Analytics Approach for Production Performance Monitoring of Heavy-Plate Production Process. IEEE Transactions on Cybernetics.DOI
112. Danya Xu, Mingwei Jia, Tao Chen, Yi Liu, Tianyou Chai, Tao Yang (2024). Decentralized federated domain generalization with cluster alignment for fault diagnosis. Control Engineering Practice.DOI
113. Lei Xu, Xinlei Yi, Chao Deng, Yang Shi, Tianyou Chai, Tao Yang (2024). Quantized Zeroth-Order Gradient Tracking Algorithm for Distributed Nonconvex Optimization Under Polyak–Łojasiewicz Condition. IEEE Transactions on Cybernetics.DOI
114. Ran Chen, Yuzhe Li, Xi‐Ming Sun, Tianyou Chai (2024). Multiobjective Optimization for Turbofan Engine Using Gradient-Free Method. IEEE Transactions on Systems Man and Cybernetics Systems.DOI
115. Jiaxin Chen, Jinliang Ding, Ke Li, Kay Chen Tan, Tianyou Chai (2024). A Knee Point Driven Evolutionary Algorithm for Multiobjective Bilevel Optimization. IEEE Transactions on Cybernetics.DOI
116. Kesheng Zhang, Quan Xu, Changxin Liu, Tianyou Chai (2024). Intelligent decision-making system for mineral processing production indices based on digital twin interactive visualization. Journal of Visualization.DOI
117. Ruonan Yuan, Zhi‐Liang Zhao, Sen Chen, Tianyou Chai (2024). Sampled‐data‐based disturbance compensation distributed optimization control for a class of multi‐agent systems. International Journal of Robust and Nonlinear Control.DOI
118. Haofeng Wu, Qingda Chen, Yaochu Jin, Jinliang Ding, Tianyou Chai (2024). A Surrogate-Assisted Expensive Constrained Multi-Objective Optimization Algorithm Based on Adaptive Switching of Acquisition Functions. IEEE Transactions on Emerging Topics in Computational Intelligence.DOI
119. Ling Yi, Jinliang Ding, Changxin Liu, Tianyou Chai (2024). Fast Sensitivity-Analysis-Based Online Self-Organizing Broad Learning System. IEEE Transactions on Industrial Informatics.DOI
120. Zeli Zhao, Jinliang Ding, Jin‐Xi Zhang, Tianyou Chai (2024). Distributed Optimal Resource Allocation With Local Feasibility Constraints for High-Order Multiagent Systems. IEEE Transactions on Control of Network Systems.DOI
121. Jin‐Xi Zhang, Jinliang Ding, Tianyou Chai (2024). Fault-Tolerant Prescribed Performance Control of Wheeled Mobile Robots: A Mixed-Gain Adaption Approach. IEEE Transactions on Automatic Control.DOI
122. Ran Chen, Yuzhe Li, Tianyou Chai (2024). Risk-Constrained MPC With Application in Safety-Critical Control of Turbofan Engines. IEEE Transactions on Automation Science and Engineering.DOI
123. Ping Zhou, Shuai Zhang, Tianyou Chai (2024). Adaptive Constraint Penalty-Based Multiobjective Operation Optimization of an Industrial Dynamic System With Complex Multiconstraint. IEEE Transactions on Cybernetics.DOI
124. 柴天佑（2023）. 《控制工程》创刊30周年专刊序. 《控制工程》.
125. 柴天佑，周正，郑锐，刘宁，贾瑶（2023）. 端边云协同的PID整定智能系统. 《自动化学报》.DOI
126. 柴天佑（2023）. 《自动化学报》创刊60周年专刊序. 《自动化学报》.DOI
127. 高伟男，杨涛，柴天佑（2023）. 基于自适应动态规划和梯度下降法的自适应最优输出调节. 《控制与决策》.DOI
128. 柴天佑，程思宇，李平，贾瑶，郑锐（2023）. 端边云协同的复杂工业过程运行控制智能系统. 《控制与决策》.DOI
129. 高愫婷，柴天佑（2023）. 端边云协同的氧化铝生产过程苛性碱浓度智能预报方法. 《自动化学报》.DOI
130. 刘宁，柴天佑（2023）. PID控制器参数的优化整定方法. 《自动化学报》.DOI
131. 柴天佑（2023）. 工业人工智能与工业互联网协同实现生产过程智能化及其未来展望. 《控制工程》.
132. 代学武，贾志安，崔东亮，柴天佑（2023）. 基于扩展PI抗扰补偿器的高精度时间同步控制. 《自动化学报》.DOI
133. 李智，郑广智，张敏喆，柴天佑（2023）. 基于“端——边—云”协同架构的垂直行业工业互联网应用范式：以化纤工业智能体为例. 《新型工业化》.
134. 张菁雯，柴天佑，李慷（2023）. 电熔镁砂生产用电需量多步智能预报方法. 《自动化学报》.DOI
135. Tianyou Chai, Mingyu Li, Zheng Zhou, Siyu Cheng, Yao Jia, Zhiwei Wu（2023）. 重大耗能设备低碳运行智能控制方法（英文）. Engineering.
136. Jinxi Zhang, Tianyou Chai, Yangquan Chen (2023). Decentralized Model-Free Prescribed Performance Control for Interconnected Systems. 《第35届中国控制与决策会议论文集（1）》.DOI
137. Weizhou Wang, Tianyou Chai, Hong Wang, Zhiwei Wu (2023). Signal-Compensation-Based Adaptive PID Control for Fused Magnesia Smelting Processes. IEEE transactions on industrial electronics (1982. Print).DOI
138. Chun Li, Jinliang Ding, Frank L. Lewis, Tianyou Chai (2023). Error-based adaptive optimal tracking control of nonlinear discrete-time systems. Science China Information Sciences.DOI
139. Zhengyan Qin, Tengfei Liu, Tao Liu, Zhong‐Ping Jiang, Tianyou Chai (2023). Distributed Feedback Optimization of Nonlinear Uncertain Systems Subject to Inequality Constraints. IEEE Transactions on Automatic Control.DOI
140. Chao Deng, Lei Xu, Tao Yang, Dong Yue, Tianyou Chai (2023). Distributed Cooperative Optimization for Nonlinear Heterogeneous MASs Under Intermittent Communication. IEEE Transactions on Automatic Control.DOI
141. Lei Xu, Xinlei Yi, Yang Shi, Karl Henrik Johansson, Tianyou Chai, Tao Yang (2023). Distributed Nonconvex Optimization With Event-Triggered Communication. IEEE Transactions on Automatic Control.DOI
142. Zhi Li, Danya Xu, Yuzhe Li, Tianyou Chai, Tao Yang (2023). OSVAE-GAN: Orthogonal Self-Attention Variational Autoencoder Generative Adversarial Networks for Time Series Anomaly Detection. IEEE Symposium Series on Computational Intelligence (SSCI).DOI
143. Shuangqing Wang, Jianbo Yu, Zhi Li, Tianyou Chai (2023). Semisupervised Classification With Sequence Gaussian Mixture Variational Autoencoder. IEEE Transactions on Industrial Electronics.DOI
144. Yue Liu, Ping Zhou, Xiaoyang Sun, Tianyou Chai (2023). Optimal Tracking Control of Blast Furnace Molten Iron Quality Based on Krotov's Method and Nonlinear Subspace Identification. IEEE Transactions on Industrial Electronics.DOI
145. Chaoyao Wen, Ping Zhou, Wei Dai, Liang Dong, Tianyou Chai (2023). Online Sequential Sparse Robust Neural Networks With Random Weights for Imperfect Industrial Streaming Data Modeling. IEEE Transactions on Automation Science and Engineering.DOI
146. Yi Jiang, Weinan Gao, Ci Chen, Tianyou Chai, Frank L. Lewis (2023). Adaptive Optimal Control of Linear Discrete-Time Networked Control Systems with Two-Channel Stochastic Dropouts. SIAM Journal on Control and Optimization.DOI
147. Antonis I. G. Vardulakis, Aristotelis Yannakoudakis, Cui Wei, Tianyou Chai (2023). On proper and stable stabilising controllers for a class of linear multivariable systems. International Journal of Control.DOI
148. Yuanzheng Li, Chaofan Yu, Mohammad Shahidehpour, Tao Yang, Zhigang Zeng, Tianyou Chai (2023). Deep Reinforcement Learning for Smart Grid Operations: Algorithms, Applications, and Prospects. Proceedings of the IEEE.DOI
149. Yuxiang Hu, Xuewu Dai, Dongliang Cui, Tianyou Chai (2023). Detection and Identification of Cyberattacks and Physical Faults in Multi-Agent Systems: A Distributed Disturbance Decoupling Observer. IEEE Transactions on Industrial Informatics.DOI
150. Tianyou Chai, Mingyu Li, Zheng Zhou, Siyu Cheng, Yao Jia, Zhiwei Wu (2023). An Intelligent Control Method for the Low-Carbon Operation of Energy-Intensive Equipment. Engineering.DOI
151. Ruiyao Zhang, Ping Zhou, Tianyou Chai (2023). Improved Copula-based conformal prediction for uncertainty quantification of multi-output regression. Journal of Process Control.DOI
152. Yuheng Liu, Tianyou Chai (2023). Demand Peak Forecasting of the Fused Magnesia Furnace Group With Model Prediction and Adaptive Deep Learning. IEEE Transactions on Neural Networks and Learning Systems.DOI
153. Kailai Gao, Cuie Yang, Jinliang Ding, Kay Chen Tan, Tianyou Chai (2023). Distributed Knowledge Transfer for Evolutionary Multitask Multimodal Optimization. IEEE Transactions on Evolutionary Computation.DOI
154. Jinna Li, Hao Nie, Tianyou Chai, Frank L. Lewis (2023). Reinforcement learning for optimal tracking of large-scale systems with multitime scales. Science China Information Sciences.DOI
155. Kunpeng Zhang, Lei Xu, Xinlei Yi, Zhengtao Ding, Karl Henrik Johansson, Tianyou Chai, Tao Yang (2023). Predefined-time distributed multiobjective optimization for network resource allocation. Science China Information Sciences.DOI
156. Jin‐Xi Zhang, Tianyou Chai (2023). Global Prescribed Performance Control of Unknown Strict-Feedback Systems With Quantized References. IEEE Transactions on Systems Man and Cybernetics Systems.DOI
157. Ping Zhou, Hongpeng Li, Tianyou Chai (2023). SPEA2 based on grid density search and elite guidance for multi-objective operation optimization of wastewater treatment process. Applied Soft Computing.DOI
158. Yongfu Wang, Bingxin Ma, Dianhui Wang, Tianyou Chai (2023). Event-Triggered Prespecified Performance Control for Steer-by-Wire Systems With Input Nonlinearity. IEEE Transactions on Intelligent Transportation Systems.DOI
159. Cui Wei, Antonis I. G. Vardulakis, Tianyou Chai (2023). Stabilization of the Pendubot: a polynomial matrix approach. IMA Journal of Mathematical Control and Information.DOI
160. Weiwei Cao, Ran Chen, Mingxin Kang, Yuzhe Li, Tianyou Chai (2023). Signal Compensation Control With DDPG-Based Tuning Strategy for Electronic Throttle System. IEEE Transactions on Industrial Electronics.DOI
161. Ping Zhou, Benhua Gao, Chunhui Zhao, Tianyou Chai (2023). Heterogeneous data-driven measurement method for FeO content of sinter based on deep learning and tensor decomposition. Control Engineering Practice.DOI
162. Wenqian Xue, Bosen Lian, Jialu Fan, Tianyou Chai, Frank L. Lewis (2023). Inverse Reinforcement Learning for Trajectory Imitation Using Static Output Feedback Control. IEEE Transactions on Cybernetics.DOI
163. Ran Chen, Jingjiang Yu, Zhengen Zhao, Yuzhe Li, Jun Hui Fu, Tianyou Chai (2023). Multiobjective Bayesian Optimization for Aeroengine Using Multiple Information Sources. IEEE Transactions on Industrial Informatics.DOI
164. Qingda Chen, Jinliang Ding, Gary G. Yen, Shengxiang Yang, Tianyou Chai (2023). Multipopulation Evolution-Based Dynamic Constrained Multiobjective Optimization Under Diverse Changing Environments. IEEE Transactions on Evolutionary Computation.DOI
165. Yunlong Wang, Yan Liu, Yongfu Wang, Tianyou Chai (2023). Neural Output Feedback Control of Automobile Steer-by-Wire System With Predefined Performance and Composite Learning. IEEE Transactions on Vehicular Technology.DOI
166. 姜艺，范家璐，柴天佑（2022）. 数据驱动的保证收敛速率最优输出调节. 《自动化学报》.DOI
167. 柴天佑，刘强，丁进良，卢绍文，宋延杰，张艺洁（2022）. 工业互联网驱动的流程工业智能优化制造新模式研究展望. 《中国科学:技术科学》.
168. 王懋譞，王永富，柴天佑，张晓宇（2022）. 基于权重因子自校正的主蒸汽温度外挂广义预测串级控制. 《自动化学报》.DOI
169. 贾瑶，李帅，柴天佑（2022）. 金矿生产全流程控制系统设计与实现. 《控制工程》.
170. 姚慧颖，赵志良，陈森，柴天佑（2022）. 非线性多输入多输出连续时间系统基于历史采样数据的不确定性因素补偿控制. 《中国科学:信息科学》.
171. Hui-Ying Yao, Zhi-liang Zhao, Sen Chen, Tianyou Chai（2022）. ; (B18) 我们可以得到式 (49) 成立 . Sampled-data-based uncertainty compensation control for a.
172. Shuai Zhang, P. Zhou, Yongfang Xie, Tianyou Chai (2022). Improved model-free adaptive predictive control method for direct data-driven control of a wastewater treatment process with high performance. Journal of Process Control.DOI
173. P. Zhou, Xuan Wang, Tianyou Chai (2022). Multiobjective Operation Optimization of Wastewater Treatment Process Based on Reinforcement Self-Learning and Knowledge Guidance. IEEE Transactions on Cybernetics.DOI
174. P. Zhou, Benhua Gao, Shu Wang, Tianyou Chai (2022). Identification of Abnormal Conditions for Fused Magnesium Melting Process Based on Deep Learning and Multisource Information Fusion. IEEE transactions on industrial electronics (1982. Print).DOI
175. Zhuo Liu, Tianyou Chai, Jian Tang, Wen Yu (2022). Heterogeneous selective ensemble learning model for mill load parameters forecasting by using multiscale mechanical frequency spectrum. Soft Computing - A Fusion of Foundations, Methodologies and Applications.DOI
176. Yao Yao, Jinliang Ding, Chunhui Zhao, Yonggang Wang, Tianyou Chai (2022). Data-driven constrained reinforcement learning for optimal control of a multistage evaporation process. Control Engineering Practice.DOI
177. Xinlei Yi, Xiuxian Li, Tao Yang, Lihua Xie, Tianyou Chai, Karl Henrik Johansson (2022). Regret and Cumulative Constraint Violation Analysis for Distributed Online Constrained Convex Optimization. IEEE Transactions on Automatic Control.DOI
178. Jin‐Xi Zhang, Tao Yang, Tianyou Chai (2022). Neural Network Control of Underactuated Surface Vehicles With Prescribed Trajectory Tracking Performance. IEEE Transactions on Neural Networks and Learning Systems.DOI
179. Yi Jiang, Weinan Gao, Jin Chu Wu, Tianyou Chai, Frank L. Lewis (2022). Reinforcement learning and cooperative H ∞ output regulation of linear continuous-time multi-agent systems. Automatica.DOI
180. Bosen Lian, Vrushabh S. Donge, Frank L. Lewis, Tianyou Chai, Ali Davoudi (2022). Inverse Reinforcement Learning Control for Linear Multiplayer Games. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
181. Xinlei Yi, Shengjun Zhang, Tao Yang, Tianyou Chai, Karl Henrik Johansson (2022). Communication Compression for Distributed Nonconvex Optimization. IEEE Transactions on Automatic Control.DOI
182. Jin‐Xi Zhang, Tianyou Chai (2022). Model-Free Fault-Tolerant Control of Feedback Linearizable Systems Under Multiple Faults. China Automation Congress (CAC).DOI
183. Jun Hui Fu, Chensong Li, Yabing Huang, Yuzhe Li, Tianyou Chai (2022). Invariance Principles for Nonlinear Discrete-Time Switched Systems and Its Application to Output Synchronization of Dynamical Networks. IEEE Transactions on Cybernetics.DOI
184. Jinna Li, Lin Yuan, Tianyou Chai, Frank L. Lewis (2022). Consensus of Nonlinear Multiagent Systems With Uncertainties Using Reinforcement Learning Based Sliding Mode Control. IEEE Transactions on Circuits and Systems I Regular Papers.DOI
185. Ziquan Yu, Youmin M. Zhang, Bin Jiang, Chun‐Yi Su, Jun Hui Fu, Ying Jin, Tianyou Chai (2022). Refined Fractional-Order Fault-Tolerant Coordinated Tracking Control of Networked Fixed-Wing UAVs Against Faults and Communication Delays via Double Recurrent Perturbation FNNs. IEEE Transactions on Cybernetics.DOI
186. Cui Wei, Pedro Albertos, Tianyou Chai (2022). Linear Algebra Based Swing-Up Control of the Pendubot. International Conference on Industrial Artificial Intelligence (IAI).DOI
187. Mingyu Li, Jingwen Zhang, Tianyou Chai (2022). Deep Learning Assisted Online Multi-Step Demand Forecasting of Fused Magnesia Smelting Processes. International Conference on Industrial Artificial Intelligence (IAI).DOI
188. Bosen Lian, Wenqian Xue, Frank L. Lewis, Tianyou Chai (2022). Inverse reinforcement learning for multi-player noncooperative apprentice games. Automatica.DOI
189. Chun Li, Jinliang Ding, Frank L. Lewis, Tianyou Chai (2022). Model-Free Q-Learning for the Tracking Problem of Linear Discrete-Time Systems. IEEE Transactions on Neural Networks and Learning Systems.DOI
190. Xuewu Dai, Yuxiang Hu, Dongliang Cui, Tianyou Chai (2022). A Disturbance Decoupling Generalized Proportional–Integral Observer Design for Robust Sensor Fault Detection. IEEE Transactions on Industrial Electronics.DOI
191. Yuzhe Li, Yake Yang, Tianyou Chai, Tongwen Chen (2022). Stochastic detection against deception attacks in CPS: Performance evaluation and game-theoretic analysis. Automatica.DOI
192. Xinlei Yi, Shengjun Zhang, Tao Yang, Tianyou Chai, Karl Henrik Johansson (2022). Sublinear and Linear Convergence of Modified ADMM for Distributed Nonconvex Optimization. IEEE Transactions on Control of Network Systems.DOI
193. Bosen Lian, Frank L. Lewis, Gary A. Hewer, Katia Estabridis, Tianyou Chai (2022). Online Learning of Minmax Solutions for Distributed Estimation and Tracking Control of Sensor Networks in Graphical Games. IEEE Transactions on Control of Network Systems.DOI
194. Xinlei Yi, Shengjun Zhang, Tao Yang, Tianyou Chai, Karl Henrik Johansson (2022). A Primal-Dual SGD Algorithm for Distributed Nonconvex Optimization. IEEE/CAA Journal of Automatica Sinica.DOI
195. Yi Jiang, Dawei Shi, Jialu Fan, Tianyou Chai, Tongwen Chen (2022). Event-Triggered Model Reference Adaptive Control for Linear Partially Time-Variant Continuous-Time Systems With Nonlinear Parametric Uncertainty. IEEE Transactions on Automatic Control.DOI
196. Jun Fu, Zixiao Ma, Yue Fu, Tianyou Chai (2021). Hybrid adaptive control of nonlinear systems with non-Lipschitz nonlinearities. Systems & Control Letters, Vol. 156.DOI
197. 杨涛，易新蕾，卢绍文，Karl H.Johansson，柴天佑（2021）. 工业人工智能驱动的流程工业智能制造. Engineering.
198. 刘卓，汤健，柴天佑，余文（2021）. 基于多模态特征子集选择性集成建模的磨机负荷参数预测方法. 《自动化学报》.DOI
199. 李臻，范家璐，姜艺，柴天佑（2021）. 一种基于Off-Policy的无模型输出数据反馈H∞控制方法. 《自动化学报》.DOI
200. Qingda Chen, Jinliang Ding, Shengxiang Yang, Tianyou Chai (2021). Constrained Operational Optimization of a Distillation Unit in Refineries With Varying Feedstock Properties. 《第32届中国过程控制会议(CPCC2021)》.DOI
201. 陈庆达，丁进良，柴天佑（2021）. 变进料性质下蒸馏装置运行约束优化方法. 《2021中国自动化大会论文集》.DOI
202. Xue Xu, Jinliang Ding, Qiang Liu, Tianyou Chai (2021). A Novel Multimanifold Joint Projections Model for Multimode Process Monitoring. IEEE Transactions on Industrial Informatics.DOI
203. Yi Jiang, Yao Jia, Jialu Fan, Tianyou Chai (2021). Compensation-Signal-Based Dual-Rate Operational Feedback Decoupling Control for Flotation Processes. IEEE transactions on industrial electronics (1982. Print).DOI
204. Zhi-liang Zhao, Tianyou Chai, Cui Wei, Dong-Xu Liu, Teng-Fei Liu, Zhong-Ping Jiang (2021). Compensation-signal-driven control for a class of nonlinear uncertain systems. at - Automatisierungstechnik.DOI
205. Tao Yang, Xin-Lei Yi, Shao-Wen Lu, K. Johansson, Tianyou Chai (2021). Intelligent Manufacturing for the Process Industry Driven by Industrial Artificial Intelligence. Engineering.DOI
206. P. Zhou, Ruiyao Zhang, Jin Xie, Ji-Ping Liu, Hong Wang, Tianyou Chai (2021). Data-Driven Monitoring and Diagnosing of Abnormal Furnace Conditions in Blast Furnace Ironmaking: An Integrated PCA-ICA Method. IEEE transactions on industrial electronics (1982. Print).DOI
207. Xing-Long Lu, M. Krstić, Tianyou Chai, Jun Fu (2021). Hardware-in-the-Loop Multiobjective Extremum-Seeking Control of Mineral Grinding. IEEE Transactions on Control Systems Technology.DOI
208. P. Zhou, Weiqi Chen, Cheng-Ming Yi, Zhaohui Jiang, Tao Yang, Tianyou Chai (2021). Fast just-in-time-learning recursive multi-output LSSVR for quality prediction and control of multivariable dynamic systems. Engineering applications of artificial intelligence.DOI
209. P. Zhou, Shuai Zhang, L. Wen, Jun Fu, Tianyou Chai, Hong Wang (2021). Kalman Filter-Based Data-Driven Robust Model-Free Adaptive Predictive Control of a Complicated Industrial Process. IEEE Transactions on Automation Science and Engineering.DOI
210. Tianyou Chai, Jingwen Zhang, Tao Yang (2021). Demand Forecasting of the Fused Magnesia Smelting Process With System Identification and Deep Learning. IEEE Transactions on Industrial Informatics.DOI
211. Jinna Li, Zhenfei Xiao, Jialu Fan, Tianyou Chai, Frank L. Lewis (2021). Off-policy Q-learning: Solving Nash equilibrium of multi-player games with network-induced delay and unmeasured state. Automatica.DOI
212. Bosen Lian, Wenqian Xue, Frank L. Lewis, Tianyou Chai, Ali Davoudi (2021). Inverse Reinforcement Learning for Multi-player Apprentice Games in Continuous-Time Nonlinear Systems. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
213. Hui Zhao, Xuewu Dai, Lei Ding, Dongliang Cui, Jinliang Ding, Tianyou Chai (2021). Resilient Cooperative Control for High-Speed Trains Under Denial-of-Service Attacks. IEEE Transactions on Vehicular Technology.DOI
214. Li Zhang, Jialu Fan, Wenqian Xue, Victor G. Lopez, Jinna Li, Tianyou Chai, Frank L. Lewis (2021). Data-Driven H ∞ Optimal Output Feedback Control for Linear Discrete-Time Systems Based on Off-Policy Q -Learning. IEEE Transactions on Neural Networks and Learning Systems.DOI
215. Bosen Lian, Wenqian Xue, Frank L. Lewis, Tianyou Chai (2021). Inverse Reinforcement Learning for Adversarial Apprentice Games. IEEE Transactions on Neural Networks and Learning Systems.DOI
216. Jian Rong, Ping Zhou, Ziwen Zhang, Ruiyao Zhang, Tianyou Chai (2021). Quality-related process monitoring of ironmaking blast furnace based on improved kernel orthogonal projection to latent structures. Control Engineering Practice.DOI
217. Wenqian Xue, Bosen Lian, Jialu Fan, Patrik Kolaric, Tianyou Chai, Frank L. Lewis (2021). Inverse Reinforcement Q-Learning Through Expert Imitation for Discrete-Time Systems. IEEE Transactions on Neural Networks and Learning Systems.DOI
218. Xinlei Yi, Shengjun Zhang, Tao Yang, Tianyou Chai, Karl Henrik Johansson (2021). Linear Convergence of First- and Zeroth-Order Primal–Dual Algorithms for Distributed Nonconvex Optimization. IEEE Transactions on Automatic Control.DOI
219. Bosen Lian, Wenqian Xue, Frank L. Lewis, Tianyou Chai (2021). Robust Inverse Q -Learning for Continuous-Time Linear Systems in Adversarial Environments. IEEE Transactions on Cybernetics.DOI
220. Dan Ma, Jie Chen, Tianyou Chai (2021). Role of Integral Control for Enlarging Second-Order Delay Consensus Margin Under PID Protocols: None. IEEE Transactions on Cybernetics.DOI
221. Bosen Lian, Frank L. Lewis, Gary A. Hewer, Katia Estabridis, Tianyou Chai (2021). Robustness Analysis of Distributed Kalman Filter for Estimation in Sensor Networks. IEEE Transactions on Cybernetics.DOI
222. 于力一，贾瑶，柴天佑（2020）. 基于规则推理的氧化铝蒸发过程智能设定控制. 《第31届中国过程控制会议（CPCC 2020）》.DOI
223. 张亚军，魏萃，柴天佑，卢绍文，崔东亮（2020）. 未建模动态增量补偿驱动的非线性PID控制及应用. 《自动化学报》.DOI
224. 乔景慧，李岭，柴天佑（2020）. 基于多模型切换的生料分解率设定模型. 《控制工程》.DOI
225. 易诚明，周平，柴天佑（2020）. 基于即时学习的高炉炼铁过程数据驱动自适应预测控制. 《控制理论与应用》.
226. 张亚军，牛宏，柴天佑（2020）. 数据与未建模动态驱动的非线性PID切换控制. 《控制理论与应用》.
227. 柴天佑（2020）. 工业人工智能发展方向. 《自动化学报》.DOI
228. 杨涛，柴天佑（2020）. 分布式协同优化的研究现状与展望. 《中国科学:技术科学》.
229. 范家璐，宋延杰，杨涛，柴天佑（2020）. 依托引智基地培养具有跨学科研究能力的创新型工程科技人才. 《高等工程教育研究》.
230. Gaochang Wu, Tianyou Chai, Zhiwei Wu (2020). Abnormal Condition Prediction via Adaptive Deep Learning for Fused Magnesium Furnaces.
231. P. Zhou, Wen-Peng Li, Hong Wang, Ming-Jie Li, Tianyou Chai (2020). Robust Online Sequential RVFLNs for Data Modeling of Dynamic Time-Varying Systems With Application of an Ironmaking Blast Furnace. IEEE Transactions on Cybernetics.DOI
232. Yuyang Zhou, Aiping Wang, P. Zhou, Hong Wang, Tianyou Chai (2020). Dynamic performance enhancement for nonlinear stochastic systems using RBF driven nonlinear compensation with extended Kalman filter. at - Automatisierungstechnik.DOI
233. Nianzu Zheng, Jinliang Ding, Tianyou Chai (2020). DMGAN: Adversarial Learning-Based Decision Making for Human-Level Plant-Wide Operation of Process Industries Under Uncertainties. IEEE Transactions on Neural Networks and Learning Systems.DOI
234. Lanhao Wang, Tianyou Chai (2020). Signal Compensation Based Adaptive Cascade Control for Regrinding Processes. IEEE transactions on industrial electronics (1982. Print).DOI
235. Wenqian Xue, Jialu Fan, V. Lopez, Jin-Na Li, Yi Jiang, Tianyou Chai, F. Lewis (2020). New Methods for Optimal Operational Control of Industrial Processes Using Reinforcement Learning on Two Time Scales. IEEE Transactions on Industrial Informatics.DOI
236. Wei Dai, Lingzhi Zhang, Jun Fu, Tianyou Chai, Xiao-Ping Ma (2020). Model-data-based switching adaptive control for dense medium separation in coal beneficiation.DOI
237. Shao-Wen Lu, Tianyou Chai (2020). Mesoscale Particle Size Predictive Model for Operational Optimal Control of Bauxite Ore Grinding Process. IEEE Transactions on Industrial Informatics.DOI
238. Zhuo Liu, Tianyou Chai, Jian Tang, Wen Yu (2020). Signal Analysis of Mill Shell Vibration Based on Variational Modal Decomposition. 《第三十九届中国控制会议论文集（2）》.DOI
239. P. Zhou, Jin Xie, Wen-Peng Li, Hong Wang, Tianyou Chai (2020). Robust neural networks with random weights based on generalized M-estimation and PLS for imperfect industrial data modeling.DOI
240. Yao Jia, Tianyou Chai, Hong Wang, Chun-Yi Su (2020). A signal compensation based cascaded PI control for an industrial heat exchange system.DOI
241. P. Zhou, Ruiyao Zhang, Meng-Yu Liang, Jun Fu, Hong Wang, Tianyou Chai (2020). Fault identification for quality monitoring of molten iron in blast furnace ironmaking based on KPLS with improved contribution rate.DOI
242. Wei Dai, Lingzhi Zhang, Jun Fu, Tianyou Chai, Xiao-Ping Ma (2020). Dual-Rate Adaptive Optimal Tracking Control for Dense Medium Separation Process Using Neural Networks. IEEE Transactions on Neural Networks and Learning Systems.DOI
243. Xinlei Yi, Shengjun Zhang, Tao Yang, Tianyou Chai, Karl Henrik Johansson (2020). Linear Convergence for Distributed Optimization Without Strong Convexity. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
244. Antonis I. G. Vardulakis, Aristotelis Yannakoudakis, Cui Wei, Tianyou Chai (2020). Denominator Assignment, Invariants, and Canonical Forms Under Dynamic Feedback Compensation in Linear Multivariable Nonsquare Systems. IEEE Transactions on Automatic Control.DOI
245. Dan Ma, Jianqi Chen, Renquan Lu, Jie Chen, Tianyou Chai (2020). Delay Consensus Margin of First-Order Multiagent Systems With Undirected Graphs and PD Protocols. IEEE Transactions on Automatic Control.DOI
246. Xinlei Yi, Xiuxian Li, Tao Yang, Lihua Xie, Tianyou Chai, Karl Henrik Johansson (2020). Distributed Bandit Online Convex Optimization With Time-Varying Coupled Inequality Constraints. IEEE Transactions on Automatic Control.DOI
247. Xinlei Yi, Xiuxian Li, Tao Yang, Lihua Xie, Tianyou Chai, Karl Henrik Johansson (2020). A Distributed Primal-Dual Algorithm for Bandit Online Convex Optimization with Time-Varying Coupled Inequality Constraints. Proceedings of the ... American Control Conference/Proceedings of the American Control Conference.DOI
248. Ruijuan Chen, Tao Yang, Tianyou Chai (2020). Distributed accelerated optimization algorithms: Insights from an ODE. Science China Technological Sciences.DOI
249. Tianyou Chai, Tao Yang (2020). Research status and prospects of distributed collaborative optimization. Scientia Sinica Technologica.DOI
250. Xinlei Yi, Shengjun Zhang, Tao Yang, Tianyou Chai, Karl Henrik Johansson (2020). Exponential Convergence for Distributed Optimization Under the Restricted Secant Inequality Condition. IFAC-PapersOnLine.DOI
251. Jingwen Zhang, Kang Li, Tianyou Chai (2020). Demand Forecasting of a Fused Magnesia Smelting Process Based on LSTM and FRA. Communications in computer and information science.DOI
252. 刘炜，庞新富，俞胜平，柴天佑（2019）. 炼钢-连铸过程钢水存储设备脱碳钢包选配方法. 《系统工程理论与实践》, Vol. 39, No. 12.下载原文
253. 柴天佑，赵广立（2019）. 工业制造须发展工业人工智能. 《中国科学报》.
254. 代伟，李德鹏，陈其鑫，柴天佑（2019）. 基于鲁棒随机配置网络的赤铁矿磨矿过程数据驱动粒度估计（英文）. Journal of Central South University.
255. 柴天佑（2019）. 创新型自动化工程科技人才培养模式研究与实践. 《高等工程教育研究》.
256. 姜艺，范家璐，贾瑶，柴天佑（2019）. 数据驱动的浮选过程运行反馈解耦控制方法. 《自动化学报》.DOI
257. 魏萃，柴天佑，贾瑶，王良勇（2019）. 补偿信号法驱动的Pendubot自适应平衡控制. 《自动化学报》.DOI
258. 吴高昌，刘强，柴天佑，秦泗钊（2019）. 基于时序图像深度学习的电熔镁炉异常工况诊断. 《自动化学报》.DOI
259. 刘卓，柴天佑，汤健（2019）. 基于多尺度振动和振声频谱特征自适应提取与选择的磨机负荷参数软测量. 《控制与决策》.DOI
260. 吴倩，范家璐，姜艺，柴天佑（2019）. 无线网络环境下数据驱动混合选别浓密过程双率控制方法. 《自动化学报》.DOI
261. 罗刚，王永富，柴天佑，张化锴（2019）. 基于区间二型模糊摩擦补偿的鲁棒自适应控制. 《自动化学报》.DOI
262. 王永富，马冰心，柴天佑，张晓宇（2019）. PEMFC空气供给系统的二型自适应模糊建模与过氧比控制. 《自动化学报》.DOI
263. 刘炜，庞新富，柴天佑（2019）. 炼钢-精炼-连铸脱磷钢包调度算法研究. 《控制工程》.
264. 戴鹏，周平，梁延灼，柴天佑（2019）. 基于多输出最小二乘支持向量回归建模的自适应非线性预测控制及应用. 《控制理论与应用》.
265. 代伟，王献伟，路兴龙，柴天佑（2019）. 基于案例推理增强学习的磨矿过程设定值优化. 《控制理论与应用》.
266. 乔景慧，柴天佑（2019）. 数据与模型驱动的水泥生料分解率软测量模型. 《自动化学报》.DOI
267. 蒋兰，张亚军，柴天佑（2019）. 一类带信号补偿驱动的非线性解耦控制方法. 《第30届中国过程控制会议（CPCC 2019）摘要集》.
268. 王懋譞，王永富，柴天佑，张晓宇（2019）. 基于权重因子自校正的主汽温度外挂广义预测串级控制. 《第30届中国过程控制会议（CPCC 2019）摘要集》.
269. 王兰豪，柴天佑，贾瑶（2019）. 再磨过程的基于信号补偿法的自适应串级控制. 《第30届中国过程控制会议（CPCC 2019）摘要集》.
270. 赵亮，卢绍文，张亚军，柴天佑，赵楷文，于力一（2019）. 基于平滑交替辨识的氧化铝蒸发过程碱液浓度在线预报方法. 《第30届中国过程控制会议（CPCC 2019）摘要集》.
271. 高愫婷，胡佳浩，贾瑶，柴天佑（2019）. 氧化铝溶出过程苛性比值预测方法综述. 《第30届中国过程控制会议（CPCC 2019）摘要集》.
272. 代伟，胡金成，程玉虎，王雪松，柴天佑（2019）. 基于随机权神经网络的在线自适应半监督学习算法及其在工业过程产品质量评价中的应用（英文）. Journal of Central South University.
273. 柴天佑，赵广立（2019）. 制造流程智能化让机器进入决策层. 《中国科学报》.
274. 柴天佑（2019）. 大数据与制造流程知识自动化发展战略研究.
275. Yi Jiang, Jialu Fan, Tianyou Chai, F. Lewis (2019). Dual-Rate Operational Optimal Control for Flotation Industrial Process With Unknown Operational Model. IEEE transactions on industrial electronics (1982. Print).DOI
276. Jinliang Ding, Cuie Yang, Q. Xiao, Tianyou Chai, Yaochu Jin (2019). Dynamic Evolutionary Multiobjective Optimization for Raw Ore Allocation in Mineral Processing. IEEE Transactions on Emerging Topics in Computational Intelligence.DOI
277. Jie Yang, Tianyou Chai, C. Luo, Wen Yu (2019). Intelligent Demand Forecasting of Smelting Process Using Data-Driven and Mechanism Model. IEEE transactions on industrial electronics (1982. Print).DOI
278. P. Zhou, Yue-Xiang Jiang, Chaoyao Wen, Tianyou Chai (2019). Data modeling for quality prediction using improved orthogonal incremental random vector functional-link networks. Neurocomputing.DOI
279. Dan Guo, Zhiwei Wu, Tianyou Chai, Jie Yang, Jinliang Ding (2019). Prediction method for energy consumption per ton of fused magnesium furnaces using data driven and mechanism model. Control Theory and Technology.DOI
280. Cuie Yang, Jinliang Ding, Yaochu Jin, Chengzhi Wang, Tianyou Chai (2019). Multitasking Multiobjective Evolutionary Operational Indices Optimization of Beneficiation Processes. IEEE Transactions on Automation Science and Engineering.DOI
281. Jin-Na Li, Jinliang Ding, Tianyou Chai, F. Lewis (2019). Nonzero-Sum Game Reinforcement Learning for Performance Optimization in Large-Scale Industrial Processes. IEEE Transactions on Cybernetics.DOI
282. Ming-Jie Li, P. Zhou, Hong Wang, Tianyou Chai (2019). Geometric Analysis Based Double Closed-Loop Iterative Learning Control of Output PDF Shaping of Fiber Length Distribution in Refining Process. IEEE transactions on industrial electronics (1982. Print).DOI
283. Wei Dai, De-Peng Li, Qi-xin Chen, Tianyou Chai (2019). Data driven particle size estimation of hematite grinding process using stochastic configuration network with robust technique. Journal of Central South University.DOI
284. Jinghui Qiao, Xiao-Wei Zhao, Tianyou Chai (2019). Soft Measurement Model of Raw Meal Decomposition Ratio Based on Data Driven for Raw Meal Calcination Process. Cybersecurity and Cyberforensics Conference.DOI
285. Wei Dai, De-Peng Li, P. Zhou, Tianyou Chai (2019). Stochastic configuration networks with block increments for data modeling in process industries. Information Sciences.DOI
286. Wei Dai, Jin-Cheng Hu, Yuhu Cheng, Xuesong Wang, Tianyou Chai (2019). RVFLN-based online adaptive semi-supervised learning algorithm with application to product quality estimation of industrial processes. Journal of Central South University.DOI
287. Xing-Long Lu, Bahare Kiumarsi, Tianyou Chai, Yi Jiang, F. Lewis (2019). Operational Control of Mineral Grinding Processes Using Adaptive Dynamic Programming and Reference Governor. IEEE Transactions on Industrial Informatics.DOI
288. 柴天佑，丁进良（2018）. 流程工业智能优化制造. 《中国工程科学》, Vol. 20, No. 4.下载原文
289. 柴天佑（2018）. 制造流程智能化对人工智能的挑战. 《中国科学基金》.
290. 吴飞，阳春华，兰旭光，丁进良，郑南宁，桂卫华，高文，柴天佑，钱锋，李德毅，潘云鹤，韩军伟，付俊，刘克，宋苏，吴国政（2018）. 人工智能的回顾与展望. 《中国科学基金》.
291. 刘炜，柴天佑（2018）. 基于规则学习的炼钢-连铸钢包选配方法. 《东北大学学报(自然科学版)》.
292. 柴天佑，丁进良，徐泉，岳恒（2018）. 基于物联网的选矿制造执行系统技术. 《物联网学报》.
293. 王琳岩，李健，贾瑶，柴天佑（2018）. 混合选别浓密过程双速率智能切换控制. 《自动化学报》.DOI
294. 汤健，乔俊飞，柴天佑，刘卓，吴志伟（2018）. 基于虚拟样本生成技术的多组分机械信号建模. 《自动化学报》.DOI
295. 柴天佑（2018）. 自动化科学与技术发展方向. 《自动化学报》.DOI
296. 程盟盟，李鹏琦，卢绍文，柴天佑（2018）. 实时图像驱动的电熔镁炉虚拟可视化监控系统. 《控制工程》.
297. 周平，张丽，李温鹏，戴鹏，柴天佑（2018）. 集成自编码与PCA的高炉多元铁水质量随机权神经网络建模. 《自动化学报》.DOI
298. 丁进良，杨翠娥，陈远东，柴天佑（2018）. 复杂工业过程智能优化决策系统的现状与展望. 《自动化学报》.DOI
299. 杨杰，柴天佑，张亚军，吴志伟（2018）. 数据与模型驱动的电熔镁群炉需量预报方法. 《自动化学报》.DOI
300. 杨天皓，李健，贾瑶，刘腾飞，柴天佑（2018）. 虚拟未建模动态补偿驱动的双率自适应控制. 《自动化学报》.DOI
301. 冉振莉，徐泉，吴志伟，刘文庆，王良勇，刘长鑫，柴天佑（2018）. 基于工业云的电熔镁炉监控系统与关键技术. 《计算机集成制造系统》.
302. 刘业峰，柴天佑（2018）. 钕铁硼企业生产工单组炉的最佳优先和变邻域搜索算法. 《化工学报》.
303. 王维洲，吴志伟，柴天佑（2018）. 电熔镁砂熔炼过程带输出补偿的PID控制. 《自动化学报》.DOI
304. Ya-Jun Zhang, Yao Jia, Tianyou Chai, Dian-Hui Wang, Wei Dai, Jun Fu (2018). Data-Driven PID Controller and Its Application to Pulp Neutralization Process. IEEE Transactions on Control Systems Technology.DOI
305. Yi Jiang, Jialu Fan, Tianyou Chai, Jin-Na Li, F. Lewis (2018). Data-Driven Flotation Industrial Process Operational Optimal Control Based on Reinforcement Learning. IEEE Transactions on Industrial Informatics.DOI
306. Linyan Wang, Yao Jia, Tianyou Chai, Wen-Fang Xie (2018). Dual-Rate Adaptive Control for Mixed Separation Thickening Process Using Compensation Signal Based Approach. IEEE transactions on industrial electronics (1982. Print).DOI
307. Tianyou Chai, Jinliang Ding (2018). Smart and Optimal Manufacturing for Process Industry.DOI
308. Wei Liu, Xin-Fu Pang, Sheng-Ping Yu, Cong-Xin Li, Tianyou Chai (2018). Steelmaking-Casting of Molten Steel by Decarburization Ladle Matching.DOI
309. Zhiwei Wu, Teng-Fei Liu, Zhong-Ping Jiang, Tianyou Chai, Li-Na Zhang (2018). Nonlinear Control Tools for Fused Magnesium Furnaces: Design and Implementation. IEEE transactions on industrial electronics (1982. Print).DOI
310. Jian Tang, Junfei Qiao, Zhiwei Wu, Tianyou Chai, Jian Zhang, Wen Yu (2018). Vibration and acoustic frequency spectra for industrial process modeling using selective fusion multi-condition samples and multi-source features.DOI
311. Jian Tang, Junfei Qiao, Jian Zhang, Zhiwei Wu, Tianyou Chai, Wen Yu (2018). Combinatorial optimization of input features and learning parameters for decorrelated neural network ensemble-based soft measuring model. Neurocomputing.DOI
312. P. Zhou, Dong-Wei Guo, Hong Wang, Tianyou Chai (2018). Data-Driven Robust M-LS-SVR-Based NARX Modeling for Estimation and Control of Molten Iron Quality Indices in Blast Furnace Ironmaking. IEEE Transactions on Neural Networks and Learning Systems.DOI
313. P. Zhou, Chenyu Wang, Ming-Jie Li, Hong Wang, Yong-Jian Wu, Tianyou Chai (2018). Modeling error PDF optimization based wavelet neural network modeling of dynamic system and its application in blast furnace ironmaking. Neurocomputing.DOI
314. L. Wen, P. Zhou, Hong Wang, Tianyou Chai (2018). Model Free Adaptive Predictive Control of Multivariate Molten Iron Quality in Blast Furnace Ironmaking. IEEE Conference on Decision and Control.DOI
315. Ya-Jun Zhang, Tianyou Chai, Dian-Hui Wang, Xin-Kai Chen (2018). Virtual Unmodeled Dynamics Modeling for Nonlinear Multivariable Adaptive Control With Decoupling Design. IEEE Transactions on Systems, Man & Cybernetics. Systems.DOI
316. Yuyang Zhou, Qichun Zhang, Hong Wang, P. Zhou, Tianyou Chai (2018). EKF-Based Enhanced Performance Controller Design for Nonlinear Stochastic Systems. IEEE Transactions on Automatic Control.DOI
317. Jinghui Qiao, Ling Li, Tianyou Chai (2018). Temperature Control of Abnormal Condition Integrated with Fuzzy Improved ELMAN Network and Q Learning for Raw Meal Calcination Process. Cybersecurity and Cyberforensics Conference.DOI
318. P. Zhou, Dong-Wei Guo, Tianyou Chai (2018). Data-driven predictive control of molten iron quality in blast furnace ironmaking using multi-output LS-SVR based inverse system identification. Neurocomputing.DOI
319. Ya-Jun Zhang, Tianyou Chai, Hong Wang, Dian-Hui Wang, Xin-Kai Chen (2018). Nonlinear Decoupling Control With ANFIS-Based Unmodeled Dynamics Compensation for a Class of Complex Industrial Processes. IEEE Transactions on Neural Networks and Learning Systems.DOI
320. Jin-Na Li, Tianyou Chai, F. Lewis, Jialu Fan, Z. Ding, Jinliang Ding (2018). Off-Policy Q-Learning: Set-Point Design for Optimizing Dual-Rate Rougher Flotation Operational Processes. IEEE transactions on industrial electronics (1982. Print).DOI
321. Sheng-Ping Yu, Ying Tang, Tianyou Chai, Qiang Liu, Ye-Feng Liu (2018). Scheduling Method for Steelmaking and Continuous Casting Production Based on Heuristic Algorithm and Variable Neighborhood Search Algorithm. IEEE Conference on Decision and Control.DOI
322. 丁进良，杨翠娥，柴天佑（2017）. 数据驱动选矿过程优化研究进展. Engineering.
323. 刘昊，丁进良，杨翠娥，柴天佑（2017）. 基于择优学习策略的差分进化算法. 《上海交通大学学报》.
324. 柴天佑，王伟（2017）. 中国过程控制会议30周年专刊序言. 《自动化学报》.DOI
325. 侯一鸣，徐泉，李亚杰，王良勇，刘长鑫，柴天佑（2017）. 基于物联网和工业云的选矿设备状态监控系统. 《计算机集成制造系统》.
326. 王兰豪，贾瑶，柴天佑（2017）. 再磨过程的泵池液位和给矿压力双速率区间控制. 《自动化学报》.DOI
327. 张亚军，柴天佑，杨杰（2017）. 一类非线性离散时间动态系统的交替辨识算法及应用. 《自动化学报》.DOI
328. 乔景慧，王世杰，柴天佑（2017）. 基于协调机制的温度智能切换控制. 《控制工程》.
329. 王琳岩，贾瑶，柴天佑（2017）. 基于信号法的混合选别浓密过程双率自适应控制. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年摘要集》.
330. 刘长鑫，丁进良，柴天佑（2017）. 工业生产全流程运行性能监控评价指标设计与应用. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年》.
331. 丁进良，杨翠娥，陈立鹏，柴天佑（2017）. 基于参考点预测的动态多目标优化算法. 《自动化学报》.DOI
332. 李温鹏，周平，柴天佑（2017）. 基于Gaussian分布加权M估计的高炉炼铁过程鲁棒RVFLNs建模. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年》.
333. 周平，戴鹏，梁延灼，柴天佑（2017）. 基于多输出LS-SVR建模的数据驱动非线性自适应预测控制及应用. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年》.
334. 刘谱，张晓玲，代学武，李健，丁进良，柴天佑（2017）. 工业互联网体系架构研究综述及展望. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年摘要集》.
335. 代伟，王献伟，路兴龙，柴天佑（2017）. 基于案例推理增强学习的磨矿过程设定值优化方法. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年摘要集》.
336. 王维洲，吴志伟，柴天佑（2017）. 补偿信号驱动的电熔镁炉熔炼过程PID控制. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年摘要集》.
337. Jun Fu, Zixiao Ma, Tianyou Chai, Tai-Fang Li (2017). Optimal switching control of wind turbine systems via combining multiple models and neural networks. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年》.
338. Jiping Liu, Ping Zhou, Tianyou Chai (2017). Fault Identification Method Based on KPLS Robust Reconstruction Error and Its Application in Fuel-ratio Monitoring of Blast Furnace. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年》.
339. Wei Dai, Qixin Chen, Xiaoping Ma, Tianyou Chai (2017). Particle Size Estimate of Grinding Processes using Robust Regularized RVFLN. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年》.
340. Jian Tang, Junfei Qiao, Tianyou Chai, Zhuo Liu, Xiaojie Zhou (2017). Dual-layer Multi-scale Latent Structure Selective Ensemble Algorithm Based on Adaptive Multi-kernel Selection for Mill Load Parameters forecasting. 《第28届中国过程控制会议（CPCC 2017）暨纪念中国过程控制会议30周年》.
341. Wei Dai, Fei Chu, Chun-Yu Yang, Ying Chen, Tianyou Chai (2017). Software platform for optimal setting control of complex industrial processes. American Control Conference.DOI
342. Wei Dai, Qi-xin Chen, Fei Chu, Xiao-Ping Ma, Tianyou Chai (2017). Robust Regularized Random Vector Functional Link Network and Its Industrial Application. IEEE Access.DOI
343. Yonggang Wang, Yu Bai, Nan-Nan Zhang, Jun Fu, Tianyou Chai, Zai Piao (2017). Nonlinear adaptive decoupling control for the forced-circulation evaporation process. Cybersecurity and Cyberforensics Conference.DOI
344. Jinghui Qiao, Tianyou Chai (2017). RMDR optimal setting based on multi-model for raw meal calcination process. Cybersecurity and Cyberforensics Conference.DOI
345. Qiang Liu, S. Qin, Tianyou Chai (2017). Unevenly Sampled Dynamic Data Modeling and Monitoring With an Industrial Application. IEEE Transactions on Industrial Informatics.DOI
346. Tianyou Chai, Yao Jia, Hong Wang, Chun-Yi Su (2017). Dual Rate Adaptive Control for an Industrial Heat Supply Process Using Signal Compensation Approach.DOI
347. Jinliang Ding, Cuie Yang, Tianyou Chai (2017). Recent Progress on Data-Based Optimization for Mineral Processing Plants.DOI
348. Tianyou Chai, Zhiwei Wu, Hong Wang (2017). A CPS Based Optimal Operational Control System for Fused Magnesium Furnace.DOI
349. P. Zhou, Dai-qiang Peng, He-Da Song, Tianyou Chai (2017). Data-driven recursive subspace identification based online modelling for prediction and control of molten iron quality in blast furnace ironmaking.DOI
350. P. Zhou, Youbin Lv, Hong Wang, Tianyou Chai (2017). Data-Driven Robust RVFLNs Modeling of a Blast Furnace Iron-Making Process Using Cauchy Distribution Weighted M-Estimation. IEEE transactions on industrial electronics (1982. Print).DOI
351. P. Zhou, He-Da Song, Hong Wang, Tianyou Chai (2017). Data-Driven Nonlinear Subspace Modeling for Prediction and Control of Molten Iron Quality Indices in Blast Furnace Ironmaking. IEEE Transactions on Control Systems Technology.DOI
352. Yao Jia, Tianyou Chai (2017). A Data-Driven Dual-Rate Control Method for a Heat Exchanging Process. IEEE transactions on industrial electronics (1982. Print).DOI
353. P. Zhou, Ming-Jie Li, Dong-Wei Guo, Hong Wang, Tianyou Chai (2017). Modeling for output fiber length distribution of refining process using wavelet neural networks trained by NSGA II and gradient based two-stage hybrid algorithm. Neurocomputing.DOI
354. Chengzhi Wang, Jinliang Ding, Ran Cheng, Chang-Xin Liu, Tianyou Chai (2017). Data-Driven Surrogate-Assisted Multi-Objective Optimization of Complex Beneficiation Operational Process.DOI
355. Jian Tang, Jian Zhang, Zhiwei Wu, Zhuo Liu, Tianyou Chai, Wen Yu (2017). Modeling collinear data using double-layer GA-based selective ensemble kernel partial least squares algorithm. Neurocomputing.DOI
356. Wei Dai, Gang Huang, Fei Chu, Tianyou Chai (2017). Configurable Platform for Optimal-Setting Control of Grinding Processes. IEEE Access.DOI
357. Jian Tang, Junfei Qiao, Zhuo Liu, Tianyou Chai, Wen Yu (2017). Modeling mill load parameter based on LASSO using multi-scale high dimensional frequency spectra data1. International Conference on Informatics and Analytics.DOI
358. Jin-Na Li, Bahare Kiumarsi, Tianyou Chai, F. Lewis, Jialu Fan (2017). Off-Policy Reinforcement Learning: Optimal Operational Control for Two-Time-Scale Industrial Processes. IEEE Transactions on Cybernetics.DOI
359. Ya-Jun Zhang, Tianyou Chai, Dian-Hui Wang (2017). An Alternating Identification Algorithm for a Class of Nonlinear Dynamical Systems. IEEE Transactions on Neural Networks and Learning Systems.DOI
360. Qichun Zhang, Jinglin Zhou, Hong Wang, Tianyou Chai (2017). Output Feedback Stabilization for a Class of Multi-Variable Bilinear Stochastic Systems With Stochastic Coupling Attenuation. IEEE Transactions on Automatic Control.DOI
361. Tianyou Chai, Bazmi Husain, Han Ding, Kai Wollenweber, Yuming Zhang, Wen J. Li, Hesheng Wang, Aaron T. Ohta, Guanglie Zhang, Biao Zhang, Zhi Jun Han, Lianqing Liu, Heping Chen (2017). Conf Info. IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems.DOI
362. 柴天佑（2016）. 智能制造与智能优化制造. 《2016国家智能制造论坛》.
363. 刘业峰，柴天佑（2016）. 烧结钕铁硼成型生产计划编制的混合优化算法. 《南京理工大学学报》.
364. 李金娜，高溪泽，柴天佑，范家璐（2016）. 数据驱动的工业过程运行优化控制. 《控制理论与应用》.
365. 俞胜平，柴天佑（2016）. 炼钢–连铸生产启发式调度方法. 《控制理论与应用》.
366. 张丽，周平，柴天佑（2016）. 高炉多元铁水质量ARMA建模:基于Autoencoder与PCA的改进随机权神经网络方法(实际论文题目:数据驱动高炉多元铁水质量非线性动态建模). 《第27届中国过程控制会议（CPCC2016）》.
367. 周平，李瑞峰，郭东伟，王宏，柴天佑（2016）. 高炉炼铁过程多元铁水质量指标多输出支持向量回归建模. 《控制理论与应用》.
368. 杨天皓，贾瑶，刘腾飞，柴天佑（2016）. 工业换热过程虚拟未建模动态补偿驱动的双率自适应控制. 《第27届中国过程控制会议（CPCC2016）》.
369. 柴天佑（2016）. 自适应控制 = Adaptive control. 《清华大学出版社》.
370. 贾瑶，柴天佑（2016）. 汽水板式换热过程区间串级智能控制方法. 《自动化学报》.
371. 张亚军，柴天佑，史晓斌（2016）. 未建模动态驱动的水箱液位系统非线性PID控制. 《第27届中国过程控制会议（CPCC2016）》.
372. 高论，肖琼，刘长鑫，丁进良，柴天佑（2016）. 基于智能移动终端和云计算的选矿生产指标优化决策系统. 《计算机集成制造系统》.
373. 柴天佑（2016）. 工业过程控制系统研究现状与发展方向. 《中国科学:信息科学》.
374. 范家璐，姜艺，柴天佑（2016）. 无线网络环境下工业过程运行反馈控制方法. 《自动化学报》.DOI
375. 俞胜平，柴天佑（2016）. 开工时间延迟下的炼钢–连铸生产重调度方法. 《自动化学报》.DOI
376. 杜如珍，周平，王宏，柴天佑（2016）. 高浓磨输出纤维形态分布双闭环迭代学习控制. 《第27届中国过程控制会议（CPCC2016）摘要集》.
377. 黄文强，吴志伟，柴天佑（2016）. 电熔镁炉专用嵌入式控制器监控软件. 《第27届中国过程控制会议（CPCC2016）摘要集》.
378. 汤健，柴天佑，刘卓，吴志伟，周晓杰（2016）. 基于虚拟样本生成技术的磨机负荷参数软测量. 《第27届中国过程控制会议（CPCC2016）摘要集》.
379. 宋贺达，周平，王宏，柴天佑（2016）. 高炉炼铁过程多元铁水质量非线性子空间建模及应用. 《自动化学报》.DOI
380. 汤健，柴天佑，刘卓，余文，周晓杰（2016）. 基于更新样本智能识别算法的自适应集成建模. 《自动化学报》.DOI
381. Jian Tang, Tianyou Chai, Dianhui Wang, Zhuo Liu, Liu Gang (2016). Optimal Selection and Analysis of Learning Parameters for Regularized Random Weights Neural Networks. 《第27届中国过程控制会议（CPCC2016）摘要集》.
382. Jian Tang, Zhuo Liu, Meiying Jia, Tianyou Chai, Xiao-Jie Zhou (2016). Multi-scale Frequency Spectra Kernel Latent Feature Extraction based on Mutual Information for Modeling Mill load Parameters. Chinese Control and Decision Conference.DOI
383. Jinghui Qiao, Tianyou Chai (2016). Intelligence-based pressure switching control for clinker cooling process with grate cooler. Chinese Control and Decision Conference.DOI
384. Ye-Feng Liu, Tianyou Chai (2016). Research methods review of magnetic materials multi-process coordination production planning and scheduling. International Conference on Control, Automation, Robotics and Vision.DOI
385. Dan Guo, Tianyou Chai, Jinliang Ding, Yaochu Jin (2016). Small data driven evolutionary multi-objective optimization of fused magnesium furnaces. IEEE Symposium Series on Computational Intelligence.DOI
386. P. Zhou, Shao-Wen Lu, Meng Yuan, Tianyou Chai (2016). Survey on higher-level advanced control for grinding circuits operation.DOI
387. Xing-Long Lu, Bahare Kiumarsi, Tianyou Chai, Frank L. Lewis (2016). Data-driven optimal control of operational indices for a class of industrial processes.DOI
388. Ye-Feng Liu, Tianyou Chai（2016）. 焼結-の生産計画作成のためのハイブリッド最適化アルゴリズムを開発した。【JST・京大機械翻訳】.
389. Jian Tang, Zhuo Liu, Jian Zhang, Zhiwei Wu, Tianyou Chai, Wen Yu（2016）. 産業機械装置の多成分非定常信号のためのカーネル潜在特徴適応抽出と選択法【Powered by NICT】.
390. Jian Tang, Tianyou Chai, Zhiwei Wu, Zhuo Liu, Wen Yu (2016). Selective ensemble kernel partial least squares method based on dual layer genetic algorithm optimization with its application. World Congress on Intelligent Control and Automation.DOI
391. Wei Dai, P. Zhou, Da-yong Zhao, Shao-Wen Lu, Tianyou Chai (2016). Hardware-in-the-loop simulation platform for supervisory control of mineral grinding process.DOI
392. Jinliang Ding, H. Modares, Tianyou Chai, F. Lewis (2016). Data-Based Multiobjective Plant-Wide Performance Optimization of Industrial Processes Under Dynamic Environments. IEEE Transactions on Industrial Informatics.DOI
393. Lun Gao, Qiong Xiao, Chang-Xin Liu, Jinliang Ding, Tianyou Chai（2016）. 知的移動端末とクラウドコンピューティングに基づく選鉱生産指標最適化意思決定システム【JST・京大機械翻訳】.
394. Jinliang Ding, Yong D. Song, Tianyou Chai, J. Sarangapani, F. Lewis (2016). Guest Editorial [Special Issue: Data-driven Control, and Data-Based System Modelling, Monitoring, and Control].DOI
395. Jian Tang, Zhuo Liu, Jian Zhang, Zhiwei Wu, Tianyou Chai, Wen Yu (2016). Kernel latent features adaptive extraction and selection method for multi-component non-stationary signal of industrial mechanical device. Neurocomputing.DOI
396. Ye-Feng Liu, Tianyou Chai（2016）. 磁性材料プロセス配位生産計画とスケジューリングの研究方法レビュー【Powered by NICT】.
397. Jian Tang, Tianyou Chai, S. Qin, Zhuo Liu, Wen Yu (2016). Feature selection based on concurrent projection to latent structures for high dimensional spectra data. International Conference on Informatics and Analytics.DOI
398. Sheng-Ping Yu, Tianyou Chai, Ying Tang (2016). An Effective Heuristic Rescheduling Method for Steelmaking and Continuous Casting Production Process With Multirefining Modes. IEEE Transactions on Systems, Man, and Cybernetics: Systems.DOI
399. Tong Wang, Jian-Bin Qiu, Shen Yin, Hui-Jun Gao, Jialu Fan, Tianyou Chai (2016). Performance-Based Adaptive Fuzzy Tracking Control for Networked Industrial Processes. IEEE Transactions on Cybernetics.DOI
400. Jian Tang, Tianyou Chai, Wen Yu, Zhuo Liu, Xiao-Jie Zhou (2016). A Comparative Study That Measures Ball Mill Load Parameters Through Different Single-Scale and Multiscale Frequency Spectra-Based Approaches. IEEE Transactions on Industrial Informatics.DOI
401. Ying Zheng, S. Qin, Tianyou Chai (2016). Fault Detection of Multimode Processes Using Concurrent Projection to Latent Structures.DOI
402. Jian Tang, Tianyou Chai, Zhuo Liu, Wen Yu, Xiao-Jie Zhou（2016）. 更新サンプルの知的認識アルゴリズムに基づく適応統合モデリング【JST・京大機械翻訳】.
403. Li Zhang, P. Zhou, He-Da Song, Meng Yuan, Tianyou Chai (2016). Multivariable Dynamic Modeling for Molten Iron Quality Using Incremental Random Vector Functional-link Networks.DOI
404. Jian Tang, Wen Yu, Tianyou Chai, Zhuo Liu, Xiao-Jie Zhou (2016). Selective ensemble modeling load parameters of ball mill based on multi-scale frequency spectral features and sphere criterion.DOI
405. Ning Sheng, Qiang Liu, S. Qin, Tianyou Chai (2016). Comprehensive monitoring of nonlinear processes based on concurrent kernel projection to latent structures. IEEE Transactions on Automation Science and Engineering.DOI
406. Tianyou Chai, Yao Jia, Haibo Li, Hong Wang (2016). An intelligent switching control for a mixed separation thickener process.DOI
407. Jinliang Ding, Tianyou Chai, Hong-Feng Wang, Junwei Wang, Xiu-Ping Zheng (2016). An intelligent factory-wide optimal operation system for continuous production process. Enterprise Information Systems.DOI
408. Jie Yang, Tianyou Chai (2016). Data-driven demand forecasting method for fused magnesium furnaces. World Congress on Intelligent Control and Automation.DOI
409. Yefeng Liu, Quan-Ke Pan, Tianyou Chai (2015). Magnetic Material Group Furnace Problem Modeling and the Specialization of the Genetic Algorithm. Ieee Transactions On Engineering Management, Vol. 62, No. 10.DOI
410. 汤健，柴天佑，刘卓，余文（2015）. 基于非线性频谱潜在特征选择性集成建模的球磨机负荷参数预测（英文）. Chinese Journal of Chemical Engineering.
411. 王永刚，庞新富，朴在林，方晶晶，付俊，柴天佑（2015）. 强制循环蒸发系统的智能PID解耦控制（英文）. Chinese Journal of Chemical Engineering.
412. 刘卓，柴天佑，汤健（2015）. 一种多尺度球磨机筒体振动频谱分析与建模方法. 《东北大学学报(自然科学版)》.
413. 马天牧，罗小川，柴天佑（2015）. 多目标中间包计划模型及混合优化算法. 《系统工程学报》.
414. 范家璐，张也维，柴天佑（2015）. 一类工业过程运行反馈优化控制方法. 《自动化学报》.DOI
415. 张亚军，柴天佑（2015）. 一类非线性离散时间动态系统的交替辨识算法. 《第26届中国过程控制会议（CPCC2015）》.
416. 片锦香，朱云龙，刘金鑫，柴天佑（2015）. 结合BFO及CBR的层流冷却水量优化设定方法. 《仪器仪表学报》.DOI
417. 富月，柴天佑（2015）. 具有未知动态的线性系统二人零和博弈问题在线学习方案. 《控制理论与应用》.
418. 贾瑶，吴永建，代伟，张立岩，柴天佑（2015）. 矿浆中和过程区间串级智能控制方法. 《第26届中国过程控制会议（CPCC2015）》.
419. 陈立鹏，丁进良，杨翠娥，柴天佑（2015）. 基于Pareto前沿预测的动态多目标优化算法. 《第26届中国过程控制会议（CPCC2015）》.
420. 刘卓，柴天佑，余文，汤健（2015）. 基于模糊推理的磨机负荷参数选择性集成软测量模型. 《第26届中国过程控制会议（CPCC2015）》.
421. 刘业峰，刘惠鑫，柴天佑（2015）. 烧结钕铁硼成型生产计划编制的混合优化方法. 《第26届中国过程控制会议（CPCC2015）》.
422. 付俊，柴天佑，苏春翌，谢文芳（2015）. 一类非线性系统的自适应输出跟踪控制（英文）. 《控制工程》.
423. 乔景慧，柴天佑（2015）. 改进ELMAN网络的Q学习温度切换控制. 《控制理论与应用》.
424. 汤健，柴天佑，丛秋梅，刘卓，余文（2015）. 选择性融合多尺度筒体振动频谱的磨机负荷参数建模. 《控制理论与应用》.
425. Jinghui Qiao, Tianyou Chai (2015). Quality index modeling based on mechanism and multirate sampled-data in cement raw meal calcination process. Chinese Control and Decision Conference.DOI
426. Jian Tang, Tianyou Chai, Wen Yu, Zhuo Liu, Xiaojie Zhou (2015). Dual-layer selective ensemble modeling approach based on mechanical vibration and acoustic signals and its application in predicting load parameters of ball mill. 《第26届中国过程控制会议（CPCC2015）》.
427. Naiqiang Li, Ping Zhou, Hong Wang, Zicheng Zhao, Ruzhen Du, Tianyou Chai (2015). Stochastic Dynamic System Modeling of High Concentration Refining System Based on Stochastic Distribution and Wavelet Neural Network. 《第26届中国过程控制会议（CPCC2015）》.
428. Wei Liu, Wei Dai, Yefeng Liu, Liangliang Sun, Tianyou Chai (2015). Research on Reduction Section Temperature Soft Sensor Model of Hematite-Ore-Beneficiation Shaft Furnace Roasting Process with Compressed Sensing Sampling. 《第26届中国过程控制会议（CPCC2015）》.
429. Jinghui Qiao, Tianyou Chai (2015). Intelligent Control Simulation Platform Based on Cyber Physical System for Cement Raw Meal Calcination Process. 《第26届中国过程控制会议（CPCC2015）论文集》.
430. Jian Tang, Tianyou Chai, Zhuo Liu, Wen Yu (2015). Selective ensemble modeling based on nonlinear frequency spectral feature extraction for predicting load parameter in ball mills.DOI
431. Yonggang Wang, Xin-Fu Pang, Zai Piao, Jing-Jing Fang, Jun Fu, Tianyou Chai (2015). Intelligent decoupling PID control for the forced-circulation evaporation system.DOI
432. Jinghui Qiao, Tianyou Chai (2015). Modeling and Parameter Identification of Raw Meal Calcination Process. IEEE/ASME transactions on mechatronics.DOI
433. Wei Dai, Qiang Liu, Tianyou Chai (2015). Particle size estimate of grinding processes using random vector functional link networks with improved robustness. Neurocomputing.DOI
434. Jian Tang, Meiying Jia, Zhuo Liu, Tianyou Chai, Wen Yu (2015). Modeling high dimensional frequency spectral data based on virtual sample generation technique. 2015 IEEE International Conference on Information and Automation.DOI
435. Zhang-Xing Liu, Lun Gao, Jinliang Ding, Tianyou Chai (2015). Multi-dressing production targets and cloud-based mobile terminal system and method for optimizing decisions.
436. Jialu Fan, Lei Wang, Tianyou Chai (2015). Wireless network based operational optimization and control for a class of industrial processes. Asian Control Conference.DOI
437. Yao Jia, Tianyou Chai, Hong Wang (2015). An Intelligent Control Strategy for the Intervals of Temperature in a Plate Heat Exchanger.DOI
438. Meng Yuan, P. Zhou, Ming-Liang Li, Rui-Feng Li, Hong Wang, Tianyou Chai (2015). Intelligent multivariable modeling of blast furnace molten iron quality based on dynamic AGA-ANN and PCA.DOI
439. Zhuo Liu, Tianyou Chai, Wen Yu, Jian Tang (2015). Multi-frequency signal modeling using empirical mode decomposition and PCA with application to mill load estimation. Neurocomputing.DOI
440. Wei Dai, Tianyou Chai, Simon X. Yang (2015). Data-Driven Optimization Control for Safety Operation of Hematite Grinding Process. IEEE transactions on industrial electronics (1982. Print).DOI
441. Jinliang Ding, Tianyou Chai, Wei-Jian Cheng, Xiu-Ping Zheng (2015). Data-based multiple-model prediction of the production rate for hematite ore beneficiation process.DOI
442. Gang Li, Tao Yuan, S. Qin, Tianyou Chai (2015). Dynamic time warping based causality analysis for root-cause diagnosis of nonstationary fault processes.DOI
443. Zhiwei Wu, Yong-Jian Wu, Tianyou Chai, Jing Sun (2015). Data-Driven Abnormal Condition Identification and Self-Healing Control System for Fused Magnesium Furnace. IEEE transactions on industrial electronics (1982. Print).DOI
444. Tianyou Chai (2015). Intelligent feedback control for operation of complex industrial processes. International Conference on Advanced Mechatronic Systems.DOI
445. K. Mao, Quan-Ke Pan, Tianyou Chai, P. Luh (2015). An Effective Subgradient Method for Scheduling a Steelmaking-Continuous Casting Process. IEEE Transactions on Automation Science and Engineering.DOI
446. Tianyou Chai, Xin-Kai Chen, Ya-Jun Zhang (2015). A New Control Scheme for a Class of Nonaffine Nonlinear Input Output Discrtet-Time Systems.
447. Dian-Hui Wang, Wen Yu, Tianyou Chai (2015). Guest Editorial: Special issue on computational intelligence for industrial data processing and analysis. Neurocomputing.DOI
448. P. Zhou, Meng Yuan, Hong Wang, Tianyou Chai (2015). Data-Driven Dynamic Modeling for Prediction of Molten Iron Silicon Content Using ELM with Self-Feedback.DOI
449. P. Zhou, Meng Yuan, Hong Wang, Zhuo Wang, Tianyou Chai (2015). Multivariable dynamic modeling for molten iron quality using online sequential random vector functional-link networks with self-feedback connections. Information Sciences.DOI
450. Kun Mao, Quan-ke Pan, Xinfu Pang, Tianyou Chai (2014). A novel Lagrangian relaxation approach for a hybrid flowshop scheduling problem in the steelmaking-continuous casting process. European Journal Of Operational Research, Vol. 236, No. 1.DOI
451. 崔文娟，王良勇，柴天佑（2014）. 基于数据驱动和虚拟未建模动态补偿的一类欠驱动机械系统的平衡控制. 《第25届中国过程控制会议论文集》.
452. 贾瑶，张立岩，柴天佑（2014）. 矿浆中和过程中基于模型预估模糊自适应控制. 《东北大学学报(自然科学版)》.
453. 孔维健，柴天佑，丁进良，吴志伟（2014）. 镁砂熔炼过程全厂电能分配实时多目标优化方法研究. 《自动化学报》.
454. 汤健，柴天佑，刘卓，余文，赵立杰（2014）. 基于选择性融合多尺度筒体振动频谱的磨机负荷参数建模. 《第25届中国过程控制会议》.
455. 周平，柴天佑（2014）. 模型驱动的冶金磨矿过程运行控制研究综述. 《第25届中国过程控制会议》.
456. 庞新富，潘全科，高亮，俞胜平，柴天佑（2014）. 某一转炉或精炼炉故障下炼钢-连铸生产重调度方法及应用. 《第25届中国过程控制会议》.
457. 吴永建，张超群，岳恒，张杰卿，柴天佑（2014）. 流程工业中设备逻辑控制程序测试平台的建立. 《第25届中国过程控制会议》.
458. 周平，柴天佑（2014）. 典型赤铁矿磨矿过程智能运行反馈控制. 《控制理论与应用》.
459. 李海波，柴天佑，赵大勇（2014）. 混合选别浓密机底流矿浆浓度和流量区间智能切换控制方法. 《自动化学报》.
460. 代伟，柴天佑（2014）. 数据驱动的复杂磨矿过程运行优化控制方法. 《自动化学报》.
461. 汤健，柴天佑，丛秋梅，苑明哲，赵立杰，刘卓，余文（2014）. 基于EMD和选择性集成学习算法的磨机负荷参数软测量. 《自动化学报》.
462. 贾瑶，岳恒，柴天佑（2014）. 高压酸浸过程多工况切换控制方法. 《控制理论与应用》.
463. 刘业峰，潘全科，柴天佑（2014）. 改进遗传算法在磁性材料组炉优化问题中的应用. 《控制理论与应用》.
464. 刘长鑫，丁进良，姜波，柴天佑（2014）. 选矿过程精矿品位自适应在线支持向量预测方法. 《控制理论与应用》.
465. Jinghui Qiao, Tianyou Chai (2014). Conditions identification model based on LLNFM and RBR in cement raw meal calcination process. Chinese Control and Decision Conference.DOI
466. Kun Mao, Quan-Ke Pan, Tianyou Chai, Junqing Li (2014). Production scheduling of a steelmaking-continuous casting process with different refining routes via Lagrangian relaxation approach. 《第25届中国过程控制会议》.
467. Shao-Wen Lu, P. Zhou, Tianyou Chai, Wei Dai (2014). Modeling and Simulation of Whole Ball Mill Grinding Plant for Integrated Control. IEEE Transactions on Automation Science and Engineering.DOI
468. Jinliang Ding, Liang Zhao, Chang-Xin Liu, Tianyou Chai (2014). GA-based principal component selection for production performance estimation in mineral processing. Computers & electrical engineering.DOI
469. Tianyou Chai, Haibo Li, Hong Wang (2014). An Intelligent Switching Control for the Intervals of Concentration and Flow-rate of Underflow Slurry in a Mixed Separation Thickener.DOI
470. Tianyou Chai, Jinliang Ding, Gang Yu, Hong Wang (2014). Integrated Optimization for the Automation Systems of Mineral Processing. IEEE Transactions on Automation Science and Engineering.DOI
471. Tianyou Chai, Hong Wang, S. Qin, Tongwen Chen, Sirish L. Shah (2014). Guest Editorial Integrated Optimization of Industrial Automation. IEEE Transactions on Automation Science and Engineering.DOI
472. Fangzhou Liu, Hui-Jun Gao, Jian-Bin Qiu, Shen Yin, Jialu Fan, Tianyou Chai (2014). Networked Multirate Output Feedback Control for Setpoints Compensation and Its Application to Rougher Flotation Process. IEEE transactions on industrial electronics (1982. Print).DOI
473. Gang Li, S. Qin, Tianyou Chai (2014). Multi-directional reconstruction based contributions for root-cause diagnosis of dynamic processes. American Control Conference.DOI
474. Tian-Mu Ma, Xiao-Chuan Luo, Tianyou Chai (2014). Modeling and hybrid optimization of batching planning system for steelmaking-continuous casting process. IEEE/CAA Journal of Automatica Sinica.DOI
475. Zhi Li, Chun-Yi Su, Tianyou Chai (2014). Compensation of Hysteresis Nonlinearity in Magnetostrictive Actuators With Inverse Multiplicative Structure for Preisach Model. IEEE Transactions on Automation Science and Engineering.DOI
476. Tianyou Chai, S. Qin, Hong Wang (2014). Optimal operational control for complex industrial processes. Annual Reviews in Control.DOI
477. Chang-Xin Liu, Jinliang Ding, Tianyou Chai (2014). Robust prediction for quality of industrial processes. International Conference on Informatics and Analytics.DOI
478. P. Zhou, Shao-Wen Lu, Tianyou Chai (2014). Data-Driven Soft-Sensor Modeling for Product Quality Estimation Using Case-Based Reasoning and Fuzzy-Similarity Rough Sets. IEEE Transactions on Automation Science and Engineering.DOI
479. Deyin Xia, Tianyou Chai, Liangyong Wang (2014). Fuzzy Neural-Network Friction Compensation-Based Singularity Avoidance Energy Swing-Up to Nonequilibrium Unstable Position Control of Pendubot. IEEE Transactions on Control Systems Technology.DOI
480. P. Zhou, Wei Dai, Tianyou Chai (2014). Multivariable Disturbance Observer Based Advanced Feedback Control Design and Its Application to a Grinding Circuit. IEEE Transactions on Control Systems Technology.DOI
481. Xing-Long Lu, Qiang Liu, Tianyou Chai, S. Qin (2014). Data-Driven Fault Diagnosis of Shaft Furnace Roasting Processes Using Reconstruction and Reconstruction-Based Contribution Approaches.DOI
482. Da-yong Zhao, Tianyou Chai (2014). Fuzzy Switching Control for Sump Level Interval and Hydrocyclone Pressure in Regrinding Process: Fuzzy Switching Control for Sump Level Interval and Hydrocyclone Pressure in Regrinding Process.DOI
483. Deyin Xia, Liangyong Wang, Tianyou Chai (2014). Neural-Network-Friction Compensation-Based Energy Swing-Up Control of Pendubot. IEEE transactions on industrial electronics (1982. Print).DOI
484. Da-yong Zhao, Tianyou Chai, Hong Wang, Jun Fu (2014). Hybrid intelligent control for regrinding process in hematite beneficiation.DOI
485. Tong Wang, Jian-Bin Qiu, Hui-Jun Gao, Jialu Fan, Tianyou Chai (2014). Multirate output feedback control for complex industrial processes in double-layer network environment with RBF performance index. Proceeding of the 11th World Congress on Intelligent Control and Automation.DOI
486. Jian Tang, Y. Kan, Zhuo Liu, Tianyou Chai (2014). Modeling load parameters of ball mill using frequency spectral features based on Hilbert vibration decomposition. International Conference on Informatics and Analytics.DOI
487. Jian Tang, Wen Yu, Tianyou Chai, Zhuo Liu (2014). Modeling parameters of mill load based on dual layer selective ensemble learning strategy. Proceeding of the 11th World Congress on Intelligent Control and Automation.DOI
488. Zhijun Li, Hang Su, Hong-Bing Zhang, Chun-Yi Su, Tianyou Chai (2014). Barrier Lyapunov Based Control of dual-arm exoskeleton robots performing asymmetric bimanual tasks. Proceedings of the 2014 International Conference on Advanced Mechatronic Systems.DOI
489. Wei-Jian Kong, Tianyou Chai, Jinliang Ding, Sheng-Xiang Yang (2014). Multifurnace Optimization in Electric Smelting Plants by Load Scheduling and Control. IEEE Transactions on Automation Science and Engineering.DOI
490. Chang-Xin Liu, Jinliang Ding, A. Toprac, Tianyou Chai (2014). Data-based adaptive online prediction model for plant-wide production indices. Knowledge and Information Systems.DOI
491. Ye-Feng Liu, Quan-Ke Pan, Tianyou Chai (2014). Design and development of optimization software of magnetic multi-process coordination production planning based on benefit. Proceeding of the 11th World Congress on Intelligent Control and Automation.DOI
492. Jian Tang, Tianyou Chai, Wen Yu, Li-Jie Zhao (2014). On-line KPLS Algorithm with Application to Ensemble Modeling Parameters of Mill Load: On-line KPLS Algorithm with Application to Ensemble Modeling Parameters of Mill Load.DOI
493. K. Mao, Quan-Ke Pan, Xin-Fu Pang, Tianyou Chai (2014). An effective Lagrangian relaxation approach for rescheduling a steelmaking-continuous casting process.DOI
494. Zhijun Li, Shuming Deng, Chun-Yi Su, Tianyou Chai, Chenguang Yang, Jun Fu (2014). Decentralized control of multiple cooperative manipulators with impedance interaction using fuzzy systems. International Conference on Informatics and Analytics.DOI
495. Ya-Jun Zhang, Tianyou Chai, Jing Sun, Xin-Kai Chen, Hong Wang (2014). A Novel Estimation Algorithm Based on Data and Low-Order Models for Virtual Unmodeled Dynamics. IEEE Transactions on Neural Networks and Learning Systems.DOI
496. Ya-Jun Zhang, Tianyou Chai (2014). Experimental and comparative studies of unmodeled dynamics estimation algorithm. Proceeding of the 11th World Congress on Intelligent Control and Automation.DOI
497. Jinghui Qiao, Tianyou Chai, Hong Wang (2014). Intelligent Setting Control for Clinker Calcination Process.DOI
498. Tengfei Liu, Zhong‐Ping Jiang, Tianyou Chai (2014). Distributed nonlinear control of multi-agent systems with switching topologies. IEEE International Conference on Information and Automation (ICIA).DOI
499. Qiang Liu, S. Joe Qin, Tianyou Chai (2014). Quality-Relevant Monitoring and Diagnosis with Dynamic Concurrent Projection to Latent Structures. IFAC Proceedings Volumes.DOI
500. JIA Yao, Dai Wei, YUE Heng, Chai Tian-you (2014). Multi-variable Control for HPAL Using Nonlinear Multivariable Decoupling PID Control based on Predictive Model. IFAC Proceedings Volumes.DOI
501. 赵立杰，柴天佑，袁德成，刁晓坤（2013）. 增强操作工况识别可靠性的概率PLS-ELM方法. 《浙江大学学报(工学版)》.
502. 黄辉，罗小川，郑秉霖，柴天佑（2013）. 炼铁-炼钢区间铁水重调度方法及其应用. 《系统工程学报》.
503. 马天牧，罗小川，柴天佑（2013）. 考虑转炉容量和宽度的炉次计划混合优化方法. 《系统工程学报》.
504. 刘业峰，徐冠群，潘全科，柴天佑（2013）. 磁性材料成型烧结生产调度优化方法及应用. 《浙江大学学报(工学版)》.
505. 王永刚，庞新富，李海波，柴天佑（2013）. 氧化铝蒸发过程的混合智能优化设定控制. 《化工学报》.
506. 王永刚，李海波，柴天佑（2013）. 强制循环蒸发器的非线性解耦控制. 《化工学报》.
507. 汤健，柴天佑，余文，赵立杰（2013）. 在线KPLS建模方法及在磨机负荷参数集成建模中的应用. 《自动化学报》.
508. 白锐，佟绍成，柴天佑（2013）. 氧化铝生料浆制备过程的智能优化控制方法. 《控制与决策》.
509. 代伟，周平，柴天佑（2013）. 运行优化控制集成系统优化设定软件平台的研究与开发. 《计算机集成制造系统》.
510. 片锦香，柴天佑，李界家（2013）. 变结构PI迭代学习及在层流冷却过程中的应用. 《仪器仪表学报》.
511. 吴志伟，柴天佑，吴永建（2013）. 电熔镁砂产品单吨能耗混合预报模型. 《自动化学报》.
512. 白锐，佟绍成，柴天佑（2013）. 连续退火机组张紧辊带钢张力的建模及解耦控制. 《控制理论与应用》.
513. 柴天佑（2013）. 复杂工业过程运行优化与反馈控制. 《自动化学报》.
514. 柴天佑，李少远，王宏（2013）. 网络信息模式下复杂工业过程建模与控制. 《自动化学报》.
515. 赵大勇，柴天佑（2013）. 再磨过程泵池液位区间与给矿压力模糊切换控制. 《自动化学报》.
516. 李海波，柴天佑，岳恒（2013）. 浮选过程自动控制系统. 《控制工程》.
517. 刘业峰，潘全科，柴天佑（2013）. 烧结钕铁硼甩带生产计划编制方法及应用. 《控制工程》.
518. 丛秋梅，苑明哲，柴天佑，王宏（2013）. 带有工况中心修正的多模型在线建模. 《控制理论与应用》.
519. P. Zhou, Tianyou Chai, Jing Sun (2013). Intelligence-Based Supervisory Control for Optimal Operation of a DCS-Controlled Grinding System. IEEE Transactions on Control Systems Technology.DOI
520. Jinliang Ding, Hong Wang, Chunbo Liu, Tianyou Chai (2013). A multiobjective operational optimization approach for iron ore beneficiation process. Proceedings of the 2013 International Conference on Advanced Mechatronic Systems.DOI
521. Jinghui Qiao, Han Zhang, Tianyou Chai (2013). An intelligent temperature switching control for cement raw meal calcination process. 2013 10th IEEE International Conference on Control and Automation (ICCA).DOI
522. Xubin Sun, Jinliang Ding, Hong Wang, Tianyou Chai, Hairong Dong (2013). Iterative learning based particle size distribution control in grinding process using output PDF method. 2013 10th IEEE International Conference on Control and Automation (ICCA).DOI
523. Yong-Fu Wang, Dian-Hui Wang, Tianyou Chai (2013). Active control of friction self-excited vibration using neuro-fuzzy and data mining techniques. Expert systems with applications.DOI
524. Zhi Li, Chun-Yi Su, Tianyou Chai, Ying Feng (2013). Prescribed Adaptive Control of a Class of Nonlinear System with Asymmetric Hysteresis.DOI
525. Tianyou Chai, Yaochu Jin, B. Sendhoff (2013). Evolutionary Complex Engineering Optimization: Opportunities and Challenges [Guest Editorial].DOI
526. Yonggang Wang, Tianyou Chai, Jun Fu, Jing Sun, Hong Wang (2013). Adaptive Decoupling Switching Control of the Forced-Circulation Evaporation System Using Neural Networks. IEEE Transactions on Control Systems Technology.DOI
527. Ya-Jun Zhang, Tianyou Chai, Hong Wang, Xin-Kai Chen, Chun-Yi Su (2013). An Improved Estimation Method for Unmodeled Dynamics Based on ANFIS and Its Application to Controller Design. IEEE transactions on fuzzy systems.DOI
528. Jian Tang, Tianyou Chai, Wen Yu, Li-Jie Zhao (2013). Modeling Load Parameters of Ball Mill in Grinding Process Based on Selective Ensemble Multisensor Information. IEEE Transactions on Automation Science and Engineering.DOI
529. Wei-Jian Kong, Tianyou Chai, Sheng-Xiang Yang, Jinliang Ding (2013). A hybrid evolutionary multiobjective optimization strategy for the dynamic power supply problem in magnesia grain manufacturing. Applied Soft Computing.DOI
530. Tianyou Chai, Lin Zhao, Jian-Bin Qiu, Fangzhou Liu, Jialu Fan (2013). Integrated Network-Based Model Predictive Control for Setpoints Compensation in Industrial Processes. IEEE Transactions on Industrial Informatics.DOI
531. Gang Yu, Tianyou Chai, Xiao-Chuan Luo (2013). Two-Level Production Plan Decomposition Based on a Hybrid MOEA for Mineral Processing. IEEE Transactions on Automation Science and Engineering.DOI
532. Chun-Yu Yang, Qing-Ling Zhang, Tianyou Chai (2013). Nonlinear observers for a class of nonlinear descriptor systems.DOI
533. Wei-Jian Kong, Jinliang Ding, Tianyou Chai, Xiu-Ping Zheng, Sheng-Xiang Yang (2013). A multiobjective particle swarm optimization algorithm for load scheduling in electric smelting furnaces. IEEE Symposium on Computational Intelligence for Engineering Solutions.DOI
534. Yue Fu, Tianyou Chai (2013). Self-Tuning Control With a Filter and a Neural Compensator for a Class of Nonlinear Systems. IEEE Transactions on Neural Networks and Learning Systems.DOI
535. Jun Fu, Tianyou Chai, Chun-Yi Su, Ying Jin, Ying Jin (2013). Technical communique: Motion/force tracking control of nonholonomic mechanical systems via combining cascaded design and backstepping.DOI
536. Haibo Li, Tianyou Chai, Jun Fu, Hong Wang (2013). Adaptive Decoupling Control of Pulp Levels in Flotation Cells.DOI
537. Yue Fu, Tianyou Chai (2013). Technical communique: Robust adaptive regulation of discrete time nonlinear systems with arbitrary nonlinearities.DOI
538. Shen Yin, Fangzhou Liu, Hui-Jun Gao, Jian-Bin Qiu, Tianyou Chai, Jialu Fan, H. Karimi (2013). Setpoints compensation in industrial processes via multirate output feedback control. Asian Control Conference.DOI
539. Qiang Liu, S. Qin, Tianyou Chai (2013). Decentralized Fault Diagnosis of Continuous Annealing Processes Based on Multilevel PCA. IEEE Transactions on Automation Science and Engineering.DOI
540. Liang-Liang Sun, Tianyou Chai (2013). Application of Mix Optimization Scheduling Approach for Steelmaking Continuous Casting Process Based on Actual Steelmaking Industry.
541. Wei-Tao Li, Dian-Hui Wang, Tianyou Chai (2013). Burning state recognition of rotary kiln using ELMs with heterogeneous features. Neurocomputing.DOI
542. Jinliang Ding, Hou-Quan Wang, Rei Nie, Tianyou Chai (2013). Multiobjective optimization for planning of mineral processing under varied equipment capability. Proceedings of the 2013 International Conference on Advanced Mechatronic Systems.DOI
543. Da-yong Zhao, Tianyou Chai (2013). Intelligent optimal control system for ball mill grinding process. Journal of Control Theory and Applications.DOI
544. Zheng Fang, Jie Yang, Tao Shifei, Zhiwei Wu, Chai Tian-you (2013). A Real-Time Embedded Control System for Electro-Fused Magnesia Furnace. Journal of Control Science and Engineering.DOI
545. Chai Tian-you (2013). Research and development of optimal-setting software platform based on optimal operational control integrated system.
546. 庞新富，俞胜平，罗小川，潘全科，柴天佑（2012）. 混合Jobshop炼钢-连铸重调度方法及其应用. 《系统工程理论与实践》, Vol. 32, No. 4.下载原文
547. 代伟，周平，柴天佑（2012）. 强磁选过程优化运行的智能设定控制方法. 《东北大学学报(自然科学版)》.
548. 代伟，董翠连，周平，柴天佑（2012）. 基于.NET组件技术的强磁选过程智能优化设定控制系统开发. 《东南大学学报(自然科学版)》.
549. 柴天佑（2012）. 发展高端自动化软件势在必行. 《中国经济和信息化》.
550. 周平，向波，柴天佑（2012）. 基于改进DOB的矿物研磨过程最优运行先进反馈控制(英文). Chinese Journal of Chemical Engineering.
551. 黄辉，柴天佑，郑秉霖，李子阳，许雯，周维（2012）. 铁水调度仿真系统的设计与实现. 《系统仿真学报》.DOI
552. 王魏，柴天佑（2012）. 基于稳定学习的碳酸碱浓度模糊建模. 《清华大学学报(自然科学版)》.
553. 李海波，郑秀萍，柴天佑（2012）. 浮选过程混合智能优化设定控制方法. 《东北大学学报(自然科学版)》.
554. 汤健，柴天佑，赵立杰，岳恒，郑秀萍（2012）. 基于振动频谱的磨矿过程球磨机负荷参数集成建模方法. 《控制理论与应用》.
555. 陈友文，柴天佑（2012）. 加热炉生产数据预处理策略研究. 《控制理论与应用》.
556. 丁进良，陈小品，柴天佑，谷德昊（2012）. 面向全流程优化的选矿过程仿真系统研发. 《控制工程》.
557. 张亚军，柴天佑，王宏，牛宏（2012）. 基于未建模动态补偿的一类MIMO非线性系统的自适应广义预测解耦切换控制(英文). 《控制理论与应用》.
558. 周平，代伟，柴天佑（2012）. 竖炉焙烧过程运行优化控制系统的开发及实验研究. 《控制理论与应用》.
559. 片锦香，柴天佑，李界家（2012）. 案例推理及迭代学习在层流冷却控制中的应用. 《自动化学报》.
560. 侯俊，王良勇，柴天佑，方正（2012）. 基于T-S模糊的欠驱动机械臂的平衡控制. 《控制工程》.
561. 片锦香，柴天佑，李界家（2012）. 规则与数据驱动的层流冷却过程带钢卷取温度模型. 《自动化学报》.
562. 吴志伟，方正，柴天佑，张新海，王超（2012）. 电熔镁炉嵌入式专用控制器及其控制方法研究. 《仪器仪表学报》.
563. 赵进慧，柴天佑，周平（2012）. 改进的膜计算仿生优化算法及在汽油调和中的应用. 《化工学报》.
564. 李海波，柴天佑，岳恒（2012）. 浮选工艺指标KPCA-ELM软测量模型及应用. 《化工学报》.
565. 赵立杰，袁德成，柴天佑（2012）. 基于多分类概率极限学习机的污水处理过程操作工况识别. 《化工学报》.
566. 汤健，柴天佑，赵立杰，岳恒，郑秀萍（2012）. 融合时/频信息的磨矿过程磨机负荷软测量. 《控制理论与应用》.
567. 汤健，赵立杰，柴天佑，岳恒（2012）. 基于振动频谱的磨机负荷在线软测量建模. 《信息与控制》.
568. 王魏，柴天佑，赵立杰（2012）. 带有稳定学习的递归神经网络动态偏最小二乘建模. 《控制理论与应用》.
569. Jian Tang, Tianyou Chai, Wen Yu, Li-Jie Zhao (2012). Feature extraction and selection based on vibration spectrum with application to estimating the load parameters of ball mill in grinding process.DOI
570. Zhi Li, Ying Feng, Tianyou Chai, Jun Fu, Chun-Yi Su (2012). Modeling and compensation of asymmetric hysteresis nonlinearity for magnetostrictive actuators with an asymmetric shifted Prandtl-Ishlinskii model. American Control Conference.DOI
571. P. Zhou, Bo Xiang, Tianyou Chai (2012). Improved Disturbance Observer (DOB) Based Advanced Feedback Control for Optimal Operation of a Mineral Grinding Process.DOI
572. Jinliang Ding, Tianyou Chai, Hong Wang, Xin-Kai Chen (2012). Knowledge-Based Global Operation of Mineral Processing Under Uncertainty. IEEE Transactions on Industrial Informatics.DOI
573. Liangyong Wang, Tianyou Chai, Chun-Yu Yang (2012). Neural-Network-Based Contouring Control for Robotic Manipulators in Operational Space. IEEE Transactions on Control Systems Technology.DOI
574. Ye-Feng Liu, Tianyou Chai, S. Qin, Quan-Ke Pan, Sheng-Xiang Yang (2012). Improved genetic algorithm for magnetic material two-stage multi-product production scheduling: A case study. IEEE Conference on Decision and Control.DOI
575. Li-Jie Zhao, Tianyou Chai, Xiao-Kun Diao, De-Cheng Yuan (2012). Multi-class Classification with One-Against-One Using Probabilistic Extreme Learning Machine. International Symposium on Neural Networks.DOI
576. P. Zhou, Shao-Wen Lu, Wei Dai, Tianyou Chai (2012). Improved disturbance observer design and its application. Chinese Control and Decision Conference.DOI
577. Aijun Yan, Tianyou Chai, Wen Yu, Zhe Xu (2012). Multi-objective evaluation-based hybrid intelligent control optimization for shaft furnace roasting process.DOI
578. Li-Jie Zhao, Dian-Hui Wang, Tianyou Chai (2012). Estimation of effluent quality using PLS-based extreme learning machines. Neural computing & applications (Print).DOI
579. Jinghui Qiao, Tianyou Chai (2012). Intelligent switching control for cement raw meal calcination process. Proceedings of the 10th World Congress on Intelligent Control and Automation.DOI
580. Haibo Li, Tianyou Chai, Liyan Zhang (2012). Hybrid intelligent optimal control for flotation processes. American Control Conference.DOI
581. P. Zhou, Tianyou Chai, Jin-Hui Zhao (2012). DOB Design for Nonminimum-Phase Delay Systems and Its Application in Multivariable MPC Control. IEEE Transactions on Circuits and Systems - II - Express Briefs.DOI
582. Jian Tang, Dian-Hui Wang, Tianyou Chai (2012). Predicting mill load using partial least squares and extreme learning machines. Soft Computing - A Fusion of Foundations, Methodologies and Applications.DOI
583. Chai Tian-you (2012). Identification of wastewater operational conditions based on multi-classification probabilistic extreme learning machine.
584. Jian Tang, Tianyou Chai, Li-Jie Zhao, Wen Yu, Heng Yue (2012). Soft sensor for parameters of mill load based on multi-spectral segments PLS sub-models and on-line adaptive weighted fusion algorithm. Neurocomputing.DOI
585. Wei Wang, Tianyou Chai, Wen Yu, Hong Wang, Chun-Yi Su (2012). Modeling Component Concentrations of Sodium Aluminate Solution Via Hammerstein Recurrent Neural Networks. IEEE Transactions on Control Systems Technology.DOI
586. Wei-Tao Li, Dian-Hui Wang, Tianyou Chai (2012). Flame Image-Based Burning State Recognition for Sintering Process of Rotary Kiln Using Heterogeneous Features and Fuzzy Integral. IEEE Transactions on Industrial Informatics.DOI
587. Jian Tang, Li-Jie Zhao, Yi-miao Li, Tianyou Chai, S. Qin (2012). Feature Selection of Frequency Spectrum for Modeling Difficulty to Measure Process Parameters. International Symposium on Neural Networks.DOI
588. Jinliang Ding, Tianyou Chai, P. Afshar, Hong Wang (2012). MLP-based nonlinear modelling for energy saving in forming section of paper machines. Proceedings of the 10th World Congress on Intelligent Control and Automation.DOI
589. Li-Jie Zhao, Tianyou Chai, De-Cheng Yuan (2012). Selective ensemble extreme learning machine modeling of effluent quality in wastewater treatment plants. International Journal of Automation and Computing.DOI
590. Yue Fu, Tianyou Chai (2012). Robust self‐tuning PI decoupling control of uncertain multivariable systems.DOI
591. Jinxiang Pian, Tianyou Chai, Jie-Jia Li (2012). Rule and Data Driven Strip Coiling Temperature Model in Laminar Cooling Process.DOI
592. Yu Zhao, Zhijie Sun, S. Qin, Tianyou Chai (2012). Non-stationary Kalman filter parametrization of subspace models with applications to MPC. American Control Conference.DOI
593. Qiang Liu, Tianyou Chai, S. Qin (2012). Fault diagnosis of continuous annealing processes using a reconstruction-based method.DOI
594. Zhi Li, Tianyou Chai, Ying Feng, Chun-Yi Su (2012). Modeling of rate-dependent asymmetric hysteresis nonlinearity for magnetostrictive actuators. 2012 IEEE International Conference on Information and Automation.DOI
595. P. Zhou, Bo Xiang, Jun Fu, Tianyou Chai (2012). Model approximation of multiple delay transfer function models using multiple-point step response fitting.DOI
596. Jinghui Qiao, Tianyou Chai (2012). Soft measurement model and its application in raw meal calcination process.DOI
597. Yue Fu, Tianyou Chai, Jun Fu (2012). Robust adaptive decoupling control based on a reduced order model. American Control Conference.DOI
598. Li-Jie Zhao, Jian Tang, Tianyou Chai (2012). Modeling Spectral Data Based on Mutual Information and Kernel Extreme Learning Machines. International Symposium on Neural Networks.DOI
599. Jian Tang, Wen Yu, Tianyou Chai, Li-Jie Zhao (2012). On-line principal component analysis with application to process modeling. Neurocomputing.DOI
600. Jian Tang, Li-Jie Zhao, J. Long, Tianyou Chai, Wen Yu (2012). Selective Ensemble Modeling Parameters of Mill Load Based on Shell Vibration Signal. International Symposium on Neural Networks.DOI
601. Jinxiang Pian, Tianyou Chai, Jie-Jia Li (2012). Application of Case-based Reasoning and Iterative Learning to Laminar Cooling Process Control.DOI
602. Gui-hua Xing, Jinliang Ding, Tianyou Chai, P. Afshar, Hong Wang (2012). Hybrid intelligent parameter estimation based on grey case-based reasoning for laminar cooling process. Engineering applications of artificial intelligence.DOI
603. Yajun Wang, Tianyou Chai, Jun Hui Fu, Yumei Zhang, Y. Fu (2012). Adaptive decoupling switching control based on generalised predictive control. IET Control Theory and Applications.DOI
604. Tianyou Chai (2012). Optimal Operational Control for Complex Industrial Processes. IFAC Proceedings Volumes.DOI
605. Hongbo Liu, LI Shao-yuan, Chai Tian-you (2012). Intelligent coordinated control of power-plant main steam pressure and power output. Journal of Systems Engineering and Electronics.
606. Chai Tian-you (2012). Hybrid Intelligent Optimal Control in Flotation Processes. Journal of Northeastern University.
607. Chai Tian-you (2012). Preprocessing of operation data in heating furnace. Control theory & applications.
608. Chai Tian-you (2012). Hybrid Intelligent Setting Control for Optimal Operation of Intensity Magnetic Separation Process. Journal of Northeastern University.
609. 俞胜平，庞新富，柴天佑，郑秉霖（2011）. 炼钢连铸生产模式及优化调度模型. 《系统工程理论与实践》, Vol. 31, No. 11.下载原文
610. 马天牧，柴天佑，郑秉霖（2011）. 基于宽度柔性的连浇组批计划模型及算法. 《系统仿真学报》.DOI
611. 吴永建，吴志伟，岳恒，柴天佑（2011）. 电熔镁炉半实物仿真实验系统. 《2011年中国智能自动化学术会议论文集（第一分册）》.
612. 孔维健，柴天佑，丁进良（2011）. 电熔镁砂企业生产计划多目标优化. 《上海交通大学学报》.
613. 刘如九，张振山，郭朝晖，柴天佑（2011）. 板坯连铸二次冷却过程动态交互式仿真系统. 《系统仿真学报》.
614. 屠乃威，黄辉，罗小川，柴天佑（2011）. 热轧批量计划模型及其混合求解算法. 《系统工程学报》.
615. 王秀英，柴天佑，郑秉霖（2011）. 炼钢-连铸调度模型参数优化设定方法. 《系统工程学报》.
616. Liang-Liang Sun, Wei Liu, Tianyou Chai (2011). Tool sequence optimization based on three logical modes of robot control via CPLEX optimization.DOI
617. 李善强，石宇静，柴天佑，陈东彦（2011）. 强制循环蒸发系统的智能解耦控制. 《电机与控制学报》.
618. 王魏，赵立杰，柴天佑（2011）. 基于改进Fast-MCD的稳健数据预处理方法. 《东北大学学报(自然科学版)》.
619. 李帷韬，周晓杰，柴天佑（2011）. 基于Gabor滤波器和潜在语义分析的烧成状态识别. 《浙江大学学报(工学版)》.
620. 屠乃威，罗小川，柴天佑（2011）. 基于蚁群优化算法的步进式加热炉调度. 《东北大学学报(自然科学版)》.
621. 李帷韬，周晓杰，柴天佑（2011）. 基于火焰图像的回转窑烧成状态识别方法研究. 《仪器仪表学报》.DOI
622. 陈友文，柴天佑（2011）. 基于蚁群算法的加热炉作业计划研究与应用. 《控制与决策》.DOI
623. 吴志伟，柴天佑，付俊，闫占伟（2011）. 电熔镁炉熔炼过程的智能设定值控制. 《控制与决策》.DOI
624. 吴志伟，吴永建，柴天佑（2011）. 基于同步扰动随机逼近算法的电熔镁炉智能控制系统. 《上海交通大学学报》.
625. 王永刚，柴天佑（2011）. 强制循环蒸发系统的非线性自适应解耦PID控制. 《控制理论与应用》.
626. 姜慧研，柴天佑（2011）. 基于可信间隔的特征选择方法研究. 《控制与决策》.
627. 王永富，王殿辉，柴天佑（2011）. 基于状态估计的摩擦模糊建模与鲁棒自适应控制. 《自动化学报》.
628. 柴天佑，张亚军（2011）. 基于未建模动态补偿的非线性自适应切换控制方法. 《自动化学报》.
629. 黄肖玲，柴天佑（2011）. 复杂生产过程计划调度级联模型在选矿MES中的应用研究. 《自动化学报》.
630. 李健，岳恒，郭向红，柴天佑（2011）. 铝酸钠叶滤过程控制仿真实验平台. 《化工学报》.
631. 乔景慧，周晓杰，柴天佑，郑秀萍（2011）. 水泥熟料生产过程生料分解率软测量模型. 《控制工程》.
632. 陈友文，柴天佑（2011）. 蓄热式加热炉的空燃比控制. 《控制工程》.
633. 赵大勇，柴天佑，付俊，岳恒（2011）. 旋流器分级过程的智能控制. 《东北大学学报(自然科学版)》.
634. 赵立杰，汤健，柴天佑（2011）. 基于选择性极限学习机集成的磨机负荷软测量. 《浙江大学学报(工学版)》.
635. 周平，柴天佑（2011）. 多变量解耦控制的工业过程运行层次控制方法. 《控制理论与应用》.
636. 乔景慧，周晓杰，柴天佑（2011）. 水泥生料预分解过程智能优化设定控制. 《控制理论与应用》.
637. 李洁，柴天佑，宫经宽（2011）. 基于交叉熵算法的PID控制器设计. 《控制与决策》.DOI
638. Tianyou Chai, Jinliang Ding, Hong Wang (2011). Multi-objective Hybrid Intelligent Optimization of Operational Indices for Industrial Processes and Application.DOI
639. Li-Jie Zhao, Dong Yan, Maolin Wang, Jian Tang, Tianyou Chai (2011). Recognition of Mill Load with KPCA and KNN Based on Shell Vibration Signals. 2011 3rd International Workshop on Intelligent Systems and Applications.DOI
640. Jian Tang, Li-Jie Zhao, Wen Yu, Tianyou Chai, Heng Yue (2011). Modified recursive partial least squares algorithm with application to modeling parameters of ball mill load. Proceedings of the 30th Chinese Control Conference.
641. Rui Bai, Tianyou Chai (2011). HYBRID INTELLIGENT OPTIMAL-SETTING CONTROL WITH MULTI-OBJECTIVES OF THE RAW SLURRY BLENDING PROCESS IN THE ALUMINA PRODUCTION.
642. Jian Tang, Tianyou Chai, Heng Yue (2011). Platform for Operational Optimal, Process Modelling and Controlling Education of Complex Industrial Process.DOI
643. Yong-Fu Wang, Dian-Hui Wang, Tianyou Chai (2011). State Estimate-based Friction Fuzzy Modeling and robust Adaptive Control.DOI
644. Ya-Jun Zhang, Tianyou Chai, Hong Wang (2011). A Nonlinear Control Method Based on ANFIS and Multiple Models for a Class of SISO Nonlinear Systems and Its Application. IEEE Transactions on Neural Networks.DOI
645. Tianyou Chai, Hong Wang (2011). Quality Monitoring and Control via Advanced Actuators and Sensors — An Introduction.DOI
646. Y.-Q. Wang, Dian-Hui Wang, Tianyou Chai (2011). Active control of friction-induced self-excited vibration using adaptive fuzzy systems.DOI
647. Yong-Fu Wang, Dian-Hui Wang, Tianyou Chai (2011). Analysis and adaptive active control of friction-induced limit cycle.DOI
648. Wei Wang, Wen Yu, Li-Jie Zhao, Tianyou Chai (2011). PCA and neural networks-based soft sensing strategy with application in sodium aluminate solution. Journal of experimental and theoretical artificial intelligence (Print).DOI
649. Nai-Wei Tu, Xiao-Chuan Luo, Tianyou Chai (2011). Two-stage Method for Solving Large-scale Hot Rolling Planning Problem in Steel Production.DOI
650. Yue Fu, Tianyou Chai (2011). Indirect self-tuning control using multiple models for non-affine nonlinear systems. International Journal of Control.DOI
651. Jinliang Ding, Tianyou Chai, Hong Wang (2011). Offline Modeling for Product Quality Prediction of Mineral Processing Using Modeling Error PDF Shaping and Entropy Minimization. IEEE Transactions on Neural Networks.DOI
652. Jian Tang, Li-Jie Zhao, Heng Yue, Tianyou Chai, Wen Yu (2011). Spectral Kernel Principal Component Selection Based on Empirical Mode Decomposition and Genetic Algorithm for Modeling Parameters of Ball Mill Load. 2011 Fourth International Conference on Intelligent Computation Technology and Automation.DOI
653. Wei-Jian Cheng, Jinliang Ding, Wei-Jian Kong, Tianyou Chai, S. Qin (2011). An adaptive chaotic PSO for parameter optimization and feature extraction of LS-SVM based modelling. Proceedings of the 2011 American Control Conference.DOI
654. Tianyou Chai, Lianfei Zhai, Heng Yue (2011). Multiple models and neural networks based decoupling control of ball mill coal-pulverizing systems.DOI
655. Yonggang Wang, Tianyou Chai, Jun Fu, Jing Sun (2011). Adaptive decoupling control of the forced-circulation evaporation system using neural networks and multiple models. Proceedings of the 2011 American Control Conference.DOI
656. Qiang Liu, Tianyou Chai, S. Qin (2011). Fault Diagnosis of Continuous Annealing Processes Using Reconstruction-based Block Contribution.DOI
657. Ye-Feng Liu, Tianyou Chai, Feng Zhao, Binglin Zheng (2011). Simulation research of magnetic multi-process production plan based on multi-model coordination. World Congress on Intelligent Control and Automation.DOI
658. Jinghui Qiao, Tianyou Chai, Hong Wang (2011). Intelligent setting control of raw meal calcination proces. IEEE Conference on Decision and Control and European Control Conference.DOI
659. R. Tan, Shuoyu Wang, Yin-Lai Jiang, K. Ishida, Tianyou Chai, M. Fujie (2011). Adaptive controller for omni-directional walker: Improvement of dynamic model. IEEE International Conference on Mechatronics and Automation.DOI
660. Wei Liu, Liang-Liang Sun, Jinliang Ding, Tianyou Chai (2011). Study on Ladle Schedule of Steel Making Process Using Heuristic Scheduling Algorithm.DOI
661. Gang Yu, Tianyou Chai, Xiao-Chuan Luo (2011). Multiobjective Production Planning Optimization Using Hybrid Evolutionary Algorithms for Mineral Processing. IEEE Transactions on Evolutionary Computation.DOI
662. Li-Jie Zhao, De-Cheng Yuan, Jian Tang, Wei Wang, Tianyou Chai (2011). Nonlinear Robust PLS Modeling of Wastewater Effluent Quality Indices. Journal of Software.DOI
663. Tianyou Chai, Zhongsheng Hou, F. Lewis, A. Hussain, Dongbin Zhao (2011). Guest Editorial Data-Based Control, Modeling, and Optimization. IEEE Transactions on Neural Networks.DOI
664. Wei-Tao Li, Xiao-Jie Zhou, Tianyou Chai (2011). “Bag of visual words” and latent semantic analysis-based burning state recognition for rotary kiln sintering process. Chinese Control and Decision Conference.DOI
665. P. Zhou, Tianyou Chai (2011). Grinding circuit control: A hierarchical approach using extended 2-DOF decoupling and model approximation.DOI
666. W. Liu, Liang-Liang Sun, Heng Yue, Tianyou Chai (2011). Steel-making Schedule of Mixed Whole/Half Charging Plan Based on Locked-Path Heuristic Policy.DOI
667. Yue Fu, Tianyou Chai (2011). Robust self-tuning PID-like control with a filter for a class of discrete time systems. IEEE Conference on Decision and Control and European Control Conference.DOI
668. Chai Tian-you (2011). Air-fuel Ratio Control of Regenerative Heating Furnaces. Control Engineering of China.
669. Chun-Yu Yang, Qing-Ling Zhang, Jing Sun, Tianyou Chai (2011). Lur'e Lyapunov Function and Absolute Stability Criterion for Lur'e Singularly Perturbed Systems. IEEE Transactions on Automatic Control.DOI
670. Jian Tang, Li-Jie Zhao, Jun-Long Zhou, Heng Yue, Tianyou Chai (2011). Corrigendum to “Experimental analysis of wet mill load based on vibration signals of laboratory scale ball mill shell” [Miner. Eng. 23 (2010) 720–730].DOI
671. Liang-Liang Sun, Wei Liu, P. Luh, Tianyou Chai, Binglin Zheng (2011). An Effective Approach for the Scheduling of Steel-making and Continuous Casting System with Stochastic Processing Requirements.DOI
672. Tianyou Chai (2011). Hybrid intelligence optimal control for operation of complex industrial processes. International Symposium on Advanced Control of Industrial Processes.
673. Hui Huang, Tianyou Chai, Xiao-Chuan Luo, Binglin Zheng, Hong Wang (2011). Two-stage method and application for molten iron scheduling problem between iron-making plants and steel-making plants.DOI
674. Liang-Liang Sun, Wei Liu, Tianyou Chai, Hong Wang, Binglin Zheng (2011). Crane Scheduling of Steel-Making and Continuous Casting Process Using the Mixed-Timed Petri Net Modelling Via CPLEX Optimization.DOI
675. Yong-Fu Wang, Dian-Hui Wang, Tianyou Chai (2011). Extraction and Adaptation of Fuzzy Rules for Friction Modeling and Control Compensation. IEEE transactions on fuzzy systems.DOI
676. Jian Tang, Tianyou Chai, Wen Yu, Li-Jie Zhao, S. Qin (2011). KPCA based multi-spectral segments feature extraction and GA based Combinatorial optimization for frequency spectrum data modeling. IEEE Conference on Decision and Control and European Control Conference.DOI
677. Wei Wang, Tianyou Chai, Li-Jie Zhao, Sichen Qin (2011). Soft sensing of sodium aluminate solution component concentrations via on-line clustering and fuzzy modeling. Proceedings of the 2011 American Control Conference.DOI
678. Tianyou Chai, Jinliang Ding, Feng-Hua Wu (2011). Hybrid intelligent control for optimal operation of shaft furnace roasting process.DOI
679. Tianyou Chai, Ya-Jun Zhang, Hong Wang, Chun-Yi Su, Jing Sun (2011). Data-Based Virtual Unmodeled Dynamics Driven Multivariable Nonlinear Adaptive Switching Control. IEEE Transactions on Neural Networks.DOI
680. Wei-Tao Li, Kezhi Mao, Tianyou Chai, Hong Zhang, Hong Wang (2011). Gabor filter and eigen-flame image-based burning state recognition for sintering process of rotary kiln. IEEE Conference on Decision and Control and European Control Conference.DOI
681. Qiang Liu, Tianyou Chai, Hong Wang, S. Qin (2011). Data-Based Hybrid Tension Estimation and Fault Diagnosis of Cold Rolling Continuous Annealing Processes. IEEE Transactions on Neural Networks.DOI
682. Sheng-Ping Yu, Tianyou Chai, Hong Wang, Xin-Fu Pang, Binglin Zheng (2011). Dynamic Optimal Scheduling Method and Its Application for Converter Fault in Steelmaking and Continuous Casting Production Process.DOI
683. Yingwei Zhang, Tianyou Chai, Zhiming Li, Chunyu Yang (2011). Modeling and Monitoring of Dynamic Processes. IEEE Transactions on Neural Networks and Learning Systems.DOI
684. Jian Tang, Lijie Zhao, Heng Yue, Wen Yu, Tianyou Chai (2011). Vibration Analysis Based on Empirical Mode Decomposition and Partial Least Square. Procedia Engineering.DOI
685. Li Zhao, D.C. Yuan, Tianyou Chai, Jian Tang (2011). KPCA and ELM ensemble modeling of wastewater effluent quality indices. Procedia Engineering.DOI
686. Chai Tian-you (2011). Gabor filter and latent semantic analysi based burning state recognition. Journal of Zhejiang University(Engineering Science).DOI
687. Chai Tian-you (2011). Hierarchical control approach for industrial process operation based on multivariable decoupling control. Control theory & applications.
688. Chai Tian-you (2011). Scheduling of Walking Beam Reheating Furnaces Based on Ant Colony Optimization Algorithm. Journal of Northeastern University.
689. Chai Tian-you (2011). Intelligent optimal-setting control for cement raw meal pre-calcining process. Control theory & applications.
690. Chai Tian-you (2011). Research and application based on ant colony algorithm for heating furnace scheduling. Kongzhi yu juece.
691. Chai Tian-you (2011). Nonlinear adaptive decoupling PID control for the forced-circulation evaporation system. Control theory & applications.
692. 石宇静，王永刚，柴天佑（2010）. 强制循环蒸发系统的多模型预测解耦控制. 《系统工程理论与实践》, No. 1.下载原文
693. 汤健，赵立杰，岳恒，柴天佑（2010）. 基于遗传算法-偏最小二乘进行谱特征选择的磨机负荷软测量方法. 《第二十九届中国控制会议论文集》.
694. 汤健，赵立杰，岳恒，柴天佑（2010）. 湿式球磨机筒体振动信号分析及负荷软测量. 《东北大学学报(自然科学版)》.
695. 张立岩，柴天佑（2010）. 氧化铝回转窑制粉系统磨机负荷的智能控制. 《控制理论与应用》.
696. 丛秋梅，赵立杰，柴天佑（2010）. 一类污水处理过程水质多模型在线软测量方法. 《东北大学学报(自然科学版)》.
697. 孙亮亮，刘炜，柴天佑（2010）. 基于深度优先搜索算法的连铸过程调度方法的研究. 《控制理论与应用》.
698. 孔维健，丁进良，柴天佑（2010）. 高维多目标进化算法研究综述. 《控制与决策》.DOI
699. 王永富，王殿辉，柴天佑（2010）. 基于数据挖掘与系统理论建立摩擦模糊模型与控制补偿. 《自动化学报》.
700. 汤健，郑秀萍，赵立杰，岳恒，柴天佑（2010）. 基于频域特征提取与信息融合的磨机负荷软测量. 《仪器仪表学报》.
701. 汤健，赵立杰，岳恒，柴天佑（2010）. 基于多源数据特征融合的球磨机负荷软测量. 《浙江大学学报(工学版)》.
702. 方正，梁宵，周晓杰，柴天佑（2010）. 内嵌脚本的组态软件策略模块设计与实现. 《控制工程》.
703. 汤健，赵立杰，岳恒，柴天佑（2010）. 磨机负荷检测方法研究综述. 《控制工程》.
704. 刘炜，孙亮亮，俞胜平，柴天佑（2010）. 炼钢-连铸动画仿真系统设计与开发. 《控制工程》.
705. 王永刚，柴天佑（2010）. 蒸发过程的非线性控制仿真研究. 《控制工程》.
706. 王魏，赵立杰，岳恒，柴天佑（2010）. 铝酸钠溶液组分浓度在线分析仪的研制. 《控制工程》.
707. 周平，柴天佑（2010）. 磨矿过程产品粒度软测量的比较研究. 《东北大学学报(自然科学版)》.
708. 黄辉，柴天佑，郑秉霖，罗小川，张红（2010）. 面向铁钢对应的两级案例推理铁水动态调度系统. 《化工学报》.
709. 张亚军，柴天佑，富月（2010）. 基于ANFIS与多模型的一类非线性系统的自适应控制方法. 《化工学报》.
710. 俞胜平，柴天佑，郑秉霖（2010）. 炼钢连铸混合智能优化调度方法及应用. 《系统工程学报》.
711. 丛秋梅，柴天佑，余文（2010）. 带有稳定学习算法的小波神经网络及应用. 《东北大学学报(自然科学版)》.
712. 王永富，王殿辉，柴天佑（2010）. 一个具有完备性和鲁棒性的模糊规则提取算法. 《自动化学报》.
713. 白锐，佟绍成，柴天佑（2010）. 从数据中提取生料浆配料过程运行控制的模糊规则. 《控制与决策》.
714. 刘强，柴天佑，秦泗钊，赵立杰（2010）. 基于数据和知识的工业过程监视及故障诊断综述. 《控制与决策》.
715. P. Afshar, Hong Wang, Tianyou Chai (2010). iDCS: A multi-agent architecture for modelling manufacturing systems. World Congress on Intelligent Control and Automation.DOI
716. Hui Huang, Wen Xu, Wei Zhou, Binglin Zheng, Tianyou Chai (2010). Research on molten iron logistics balance model in iron-steel correspondence scheduling. World Congress on Intelligent Control and Automation.DOI
717. Qiu-Mei Cong, Tianyou Chai, Wen-Yu Liu (2010). Wavelet neural networks with stable learning algorithm and its application.
718. P. Zhou, Tianyou Chai, Yanlin Wu (2010). A simple method for L2 approximation of unstable and nonminimum-phase systems. Chinese Control and Decision Conference.DOI
719. Bai-Lin Rui, S. Tong, Jian Zhang, Tianyou Chai (2010). Optimal operation control of the raw slurry blending process using the case-based reasoning and neural network.DOI
720. Jian Tang, Wen Yu, Li-Jie Zhao, Heng Yue, Tianyou Chai (2010). Modeling of operating parameters for wet ball mill by modified GA-KPLS. Third International Workshop on Advanced Computational Intelligence.DOI
721. Li-Jie Zhao, Jian Tang, Heng Yue, Tianyou Chai (2010). Notice of RetractionBased on Spectral Information Fusion Soft Senser Modeling of Wet Ball Mill Load. American Control Conference.DOI
722. Jun Hou, Liangyong Wang, Tianyou Chai, Zheng Fang, Mingkun Gao (2010). Neutral network compensator based cascade control for ball and beam system. World Congress on Intelligent Control and Automation.DOI
723. Jian Tang, Li-Jie Zhao, Heng Yue, Tianyou Chai (2010). Soft Sensor method of mill load for grinding process based on GA-PLS from spectral data using feature selection. Proceedings of the 29th Chinese Control Conference.
724. Yong-Fu Wang, Dian-Hui Wang, Tianyou Chai (2010). Extraction of Fuzzy Rules with Completeness and Robustness: Extraction of Fuzzy Rules with Completeness and Robustness.DOI
725. Wei-Jian Kong, Wei-Jian Cheng, Jinliang Ding, Tianyou Chai (2010). A Reliable and Efficient Hybrid PSO for Parameters Optimization of LS-SVM in Production Rate Prediction. International Symposium on Computational Intelligence and Design.DOI
726. Jinxiang Pian, Xiu-Ping Zheng, Tianyou Chai, Zheng Fang, Yong-Jian Wu (2010). Intelligent control method for the laminar cooling process of hot rolled strip. World Congress on Intelligent Control and Automation.DOI
727. You-Wen Chen, Tianyou Chai (2010). A model for steel billet temperature of prediction of heating furnace. Proceedings of the 29th Chinese Control Conference.
728. Liyan Zhang, Tianyou Chai, Hong Wang (2010). An intelligent mill load switching control of pulverizing system for an alumina sintering process. IEEE Conference on Decision and Control.DOI
729. Yingwei Zhang, Hongxiao Zhou, S. Qin, Tianyou Chai (2010). Decentralized Fault Diagnosis of Large-Scale Processes Using Multiblock Kernel Partial Least Squares. IEEE Transactions on Industrial Informatics.DOI
730. Jian Tang, Li-Jie Zhao, Jun-Long Zhou, Heng Yue, Tianyou Chai (2010). Experimental analysis of wet mill load based on vibration signals of laboratory-scale ball mill shell.DOI
731. Jian Tang, Li-Jie Zhao, Wen Yu, Heng Yue, Tianyou Chai (2010). Soft Sensor Modeling of Ball Mill Load via Principal Component Analysis and Support Vector Machines.DOI
732. Ya-Jun Zhang, Tianyou Chai, Hong Wang, Jun Fu (2010). Generalized predictive control method for a class of nonlinear systems using ANFIS and multiple models. IEEE Conference on Decision and Control.DOI
733. P. Afshar, A. Nobakhti, Hong Wang, Tianyou Chai (2010). Multi-objective minimum entropy controller design for stochastic processes. Proceedings of the 2010 American Control Conference.DOI
734. Jinglin Zhou, Donghua Zhou, Hong Wang, Lei Guo, Tianyou Chai (2010). Distribution function tracking filter design using hybrid characteristic functions. at - Automatisierungstechnik.DOI
735. Li-Jie Zhao, Hui Xiao, Xiao-Kun Diao, Tianyou Chai (2010). Notice of RetractionNonlinear dynamic soft senser modeling of wastewater treatment effluent quality. American Control Conference.DOI
736. Ming-Hao Tan, Shujiang Li, Tianyou Chai (2010). Model software package development for laminar cooling process in hot mill.DOI
737. Jian Tang, Li-Jie Zhao, Heng Yue, Tianyou Chai, Wen Yu (2010). On-line soft sensor based on RPCA and LSSVR for mill load parameters. IEEE International Conference on Progress in Informatics and Computing.DOI
738. Jinghui Qiao, Zheng Fang, Tianyou Chai (2010). LS-SVR-Based Soft Sensor Model for Cement Clinker Calcination Process. International Conference on Measuring Technology and Mechatronics Automation.DOI
739. Chun-Yu Yang, Qing-Ling Zhang, Tianyou Chai, Jinliang Ding (2010). Stability and strong passivity of nonlinear descriptor systems. IEEE Conference on Decision and Control.DOI
740. Wei Wang, Li-Jie Zhao, Tianyou Chai (2010). Notice of Retraction Robust kernel PLS based soft sensing for component concentrations in sodium aluminate solution.DOI
741. Wei Wang, Li-Jie Zhao, Tianyou Chai, Wen Yu (2010). Estimation of component concentrations of sodium aluminate solution via PLS and Hammerstein recurrent neural networks. Third International Workshop on Advanced Computational Intelligence.DOI
742. Ya-Jun Zhang, Tianyou Chai, Hong Wang, Jun Fu (2010). A nonlinear switching control method for a class of non-minimum-phase nonlinear systems. IEEE Conference on Decision and Control.DOI
743. Jinghui Qiao, Tianyou Chai, Zheng Fang, Xiao-Jie Zhou (2010). Fuzzy neural network integrated with PCA and its application in raw meal grinding process. Chinese Control and Decision Conference.DOI
744. Ya-Jun Zhang, Tianyou Chai, Hong Wang, Jun Fu, Liyan Zhang, Yonggang Wang (2010). An Adaptive Generalized Predictive Control Method for Nonlinear Systems Based on ANFIS and Multiple Models. IEEE transactions on fuzzy systems.DOI
745. Liang-Liang Sun, W. Liu, Baoxing Xu, Tianyou Chai (2010). The scheduling of steel-making and continuous casting process using branch and cut method via CPLEX optimization. International Conference on Computer Sciences and Convergence Information Technology.DOI
746. You-Wen Chen, Jie-Qing Zhang, Tianyou Chai, Jun Fu, Jinliang Ding (2010). Hybrid intelligent control of heating furnaces for steel rolling process. World Congress on Intelligent Control and Automation.DOI
747. Yong-Fu Wang, Tianyou Chai, Yi-Min Zhang (2010). State observer-based adaptive fuzzy output-feedback control for a class of uncertain nonlinear systems. Information Sciences.DOI
748. Jinghui Qiao, Tianyou Chai, Jie-Qing Zhang, Xiu-Ping Zheng, Zheng Fang (2010). Hybrid intelligent control of raw meal silo weight with time delay in raw meal supply process. World Congress on Intelligent Control and Automation.DOI
749. Jinliang Ding, Tianyou Chai, Hong Wang (2010). Dynamic prediction model for mixed concentrate grade of mineral processing plant. IEEE Conference on Decision and Control.DOI
750. Li-Jie Zhao, Jian Tang, Wen Yu, Heng Yue, Tianyou Chai (2010). Modelling of mill load for wet ball mill via GA and SVM based on spectral feature. International Conference on Bio-Inspired Computing: Theories and Applications.DOI
751. Zeng-Xian Geng, Linghang Meng, Zhi-Jiang Ye, Heng Yue, Tianyou Chai (2010). Research and application of intelligent control software for flotation reagent process. World Congress on Intelligent Control and Automation.DOI
752. Liang-Liang Sun, Tianyou Chai, P. Luh (2010). Scheduling of steel-making and continuous casting system using the surrogate subgradient algorithm for lagrangian relaxation. IEEE International Conference on Automation Science and Engineering.DOI
753. Nai-Wei Tu, Xiao-Chuan Luo, Hui Huang, Tianyou Chai, Binglin Zheng (2010). Method for hot rolling planning considering material requirements of downstream production lines. World Congress on Intelligent Control and Automation.DOI
754. Feng-Hua Wu, Tianyou Chai (2010). Soft sensing method for magnetic tube recovery ratio via fuzzy systems and neural networks. Neurocomputing.DOI
755. Jian Tang, Xiu-Ping Zheng, Tianyou Chai, Heng Yue, Li-Jie Zhao (2010). Multi-source data fusion soft-sensor method for ball mill operating parameters based on transformation of radial basis function. World Congress on Intelligent Control and Automation.DOI
756. You-Wen Chen, Tianyou Chai (2010). Hybrid intelligent pre-processing system of parameters in heating furnace control. 2010 Sixth International Conference on Natural Computation.DOI
757. W. Liu, Liang-Liang Sun, Yu Qi, Binglin Zheng, Tianyou Chai (2010). Study on dynamic scheduling stimulation of steelmaking and continuous casting. World Congress on Intelligent Control and Automation.DOI
758. Qiang Liu, Tianyou Chai, Hong Wang, S. Qin (2010). Tension soft sensor of continuous annealing lines using cascade frequency domain observer with combined PCA and neural networks error compensation. IEEE Conference on Decision and Control.DOI
759. Wei-Jian Kong, Jinliang Ding, Tianyou Chai, Jing Sun (2010). Large-dimensional multi-objective evolutionary algorithms based on improved average ranking. IEEE Conference on Decision and Control.DOI
760. Da-yong Zhao, Tianyou Chai, Jun Fu, Hong Wang (2010). Hybrid intelligent control for a closed-circuit grinding process. IEEE Conference on Decision and Control.DOI
761. Sheng-Xiang Yang, Dingwei Wang, Tianyou Chai, G. Kendall (2010). An improved constraint satisfaction adaptive neural network for job-shop scheduling. Journal of Scheduling.DOI
762. Li Pan, Sheng-Ping Yu, Binglin Zheng, Tianyou Chai (2010). Cast Batch Planning for Steelmaking and Continuous Casting Based on Ant Colony Algorithm. International Symposium on Computational Intelligence and Design.DOI
763. Qiu-Mei Cong, Wen Yu, Tianyou Chai (2010). Cascade Process Modeling with Mechanism-Based Hierarchical Neural Networks. International Journal of Neural Systems.DOI
764. W. Liu, Sheng-Ping Yu, Xin-Fu Pang, Binglin Zheng, Tianyou Chai (2010). Study on Scheduling of Steelmaking Continuous Casting and Mould Casting. International Conference on Electrical and Control Engineering.DOI
765. W. Liu, Sheng-Ping Yu, Xin-Fu Pang, Binglin Zheng, Tianyou Chai (2010). Study on Dynamic Scheduling of Steelmaking Continuous Casting and Mould Casting. International Conference on Electrical and Control Engineering.DOI
766. Zhiwei Wu, Tianyou Chai, Jun Fu, Jing Sun (2010). Hybrid intelligent optimal control of fused magnesium furnaces. IEEE Conference on Decision and Control.DOI
767. Yong-Fu Wang, Dian-Hui Wang, Tianyou Chai, Yi-Min Zhang (2010). ROBUST ADAPTIVE FUZZY TRACKING CONTROL WITH TWO ERRORS OF UNCERTAIN NONLINEAR SYSTEMS.
768. Xiu-Ying Wang, Tianyou Chai, Binglin Zheng, Hong Wang (2010). Two-stage optimized scheduling method and application for steelmaking and continuous casting. Proceedings of the 2010 American Control Conference.DOI
769. Xiuying Wang, Tianyou Chai, Binglin Zheng, Shengping Yu, Xiaochuan Luo (2010). Intelligent optimization scheduling of steelmaking and continuous casting production and its application. World Congress on Intelligent Control and Automation.DOI
770. Chai Tian-you (2010). Optimal rescheduling method for steelmaking-continuous casting. Journal of systems engineering.
771. Chai Tian-you (2010). Analysis of Vibration Signal of Wet Ball Mill Shell and Soft Sensoring for Mill Load. Journal of Northeastern University.
772. Chai Tian-you (2010). Research and Application on Temperature Control of Industry Heating Furnace. Gangtie yanjiu xuebao.
773. Chai Tian-you (2010). Oriented-service Simulation Platform for Iron & Steel Production Planning. Jisuanji fangzhen.
774. Chai Tian-you (2010). Design and Development of Steelmaking-Continuous Casting Animated Simulation System. Control Engineering of China.
775. Chai Tian-you (2010). Design and Implementation of Script Embedded Strategy Module in Configuration Software. Control Engineering of China.
776. Chai Tian-you (2010). On Nonlinear Control of Evaporation Process via Simulation. Control Engineering of China.
777. Chai Tian-you (2010). Scheduling continuous casting process by in-depth priority search algorithm. Control theory & applications.
778. Chai Tian-you (2010). Process Modeling Oriented Production Planning and Scheduling Simulation System for Mineral Processing. Jisuanji fangzhen.
779. Chai Tian-you (2010). On-line Component Concentrations Analyzer in Sodium Aluminate Solution. Control Engineering of China.
780. Chai Tian-you (2010). Temperature Control of Regenerative Heating Furnace Based on Double-Crossing Clipping PID-RBR. Journal of Northeastern University.
781. Chai Tian-you (2010). Comparative Study on Soft-Sensor of Grinding Particle Size. Journal of Northeastern University.
782. Chai Tian-you (2010). Multivariable Modeling Based on Dynamic Fuzzy PLS and Its Application. Jisuanji fangzhen.
783. Tianyou Chai, Zeng-Xian Geng, Heng Yue, Hong Wang, Chun-Yi Su (2009). A hybrid intelligent optimal control method for complex flotation process. International Journal Of Systems Science, Vol. 400, No. 9.DOI
784. 白锐，柴天佑，周俊武（2009）. 生料浆配料过程磨机负荷的混合智能控制. 《信息与控制》.
785. 王良勇，柴天佑（2009）. 带有神经网络补偿的机械手PD控制. 《中国电机工程学报》.
786. 黄辉，屠乃威，马天牧，郑秉霖，柴天佑（2009）. 基于VRP的模铸组炉问题模型及其蚁群算法. 《2009中国控制与决策会议》.
787. 吴永建，张晶，张莉，岳恒，柴天佑（2009）. 电熔镁炉电极调节系统的混合建模. 《PCC2009-第20届中国过程控制会议》.
788. 赵大勇，丁进良，周平，柴天佑（2009）. 磨矿过程智能运行优化控制. 《PCC2009-第20届中国过程控制会议》.
789. 周平，柴天佑，陈通文（2009）. 工业过程运行的解耦内模控制方法. 《自动化学报》.
790. 王良勇，柴天佑，方正（2009）. 考虑驱动系统动态的机械手神经网络控制及应用. 《自动化学报》.
791. 黄肖玲，柴天佑（2009）. 粒子群优化算法在大型选矿企业原料采购计划中的应用. 《自动化学报》.
792. 俞胜平，庞新富，柴天佑，郑秉霖（2009）. 加工时间不确定的炼钢连铸生产调度问题研究. 《控制与决策》.
793. 白锐，柴天佑（2009）. 基于数据融合与案例推理的球磨机负荷优化控制. 《化工学报》.
794. 俞胜平，王秀英，郑秉霖，柴天佑（2009）. 基于变约束规划模型的炼钢连铸动态调度. 《控制理论与应用》.
795. 丛秋梅，柴天佑，余文（2009）. 污水处理过程的递阶神经网络建模. 《控制理论与应用》.
796. 翟廉飞，柴天佑（2009）. 一类非线性离散系统的神经网络自适应控制. 《东北大学学报(自然科学版)》.
797. 吴志伟，吴永建，柴天佑，张莉（2009）. 一种基于规则推理的电熔镁炉智能控制系统. 《东北大学学报(自然科学版)》.
798. 片锦香，柴天佑（2009）. 热轧带钢层流冷却过程混合智能控制方法. 《东北大学学报(自然科学版)》.
799. 翟廉飞，柴天佑（2009）. 三角形式非线性离散系统自适应神经网络控制. 《东北大学学报(自然科学版)》.
800. 赵大勇，柴天佑（2009）. 自适应内模控制方法在磨矿过程中的应用. 《控制工程》.
801. 张君，岳恒，柴天佑（2009）. 钢球磨煤机制粉过程的混合智能建模. 《控制工程》.
802. 杨新，马恩杰，柴天佑（2009）. 选矿过程工艺指标确定方法及应用. 《控制工程》.
803. 白锐，柴天佑（2009）. 基于PSO算法的生料浆配料过程的优化控制. 《控制工程》.
804. 杨新，余刚，柴天佑（2009）. 粗糙集理论在选矿生产成本分析中的应用. 《控制工程》.
805. 柴天佑，刘德荣（2009）. 基于数据的控制、决策、调度与故障诊断. 《自动化学报》.
806. 王宏，柴天佑，丁进良，布朗·马丁（2009）. 数据驱动的故障诊断与容错控制:进展与可能的新方向(英文). 《自动化学报》.
807. 富月，柴天佑（2009）. 全局稳定的非线性间接自校正控制算法. 《PCC2009—第20届中国过程控制会议论文集》.
808. 乔景慧，柴天佑，岳恒（2009）. 基于灰色预测模型的回转窑熟料烧结智能优化控制. 《PCC2009—第20届中国过程控制会议论文集》.
809. 柴天佑（2009）. 生产制造全流程优化控制对控制与优化理论方法的挑战. 《自动化学报》.
810. 翟廉飞，柴天佑，葛树志（2009）. 纯反馈非线性离散系统的自适应神经网络控制. 《控制与决策》.DOI
811. 刘业峰，余刚，郑秉霖，柴天佑（2009）. 基于PCA-GA-BP的选矿工序生产指标预报模型研究. 《2009中国控制与决策会议论文集（2）》.
812. Xiao-Dong Liu, W. Pedrycz, Tianyou Chai, Ming-Li Song (2009). The Development of Fuzzy Rough Sets with the Use of Structures and Algebras of Axiomatic Fuzzy Sets. IEEE Transactions on Knowledge and Data Engineering.DOI
813. Qiang Liu, Tianyou Chai, Li-Jie Zhao, Yingwei Zhang, Shuran Zhang (2009). Modeling and gain scheduling adaptive control of tension control system for continuous annealing process. IEEE Conference on Decision and Control.DOI
814. Ya-Jun Zhang, Tianyou Chai, H. Niu, Ji-zhang Zuo (2009). Nonlinear adaptive generalized predictive control method based on ANFIS and switching control. IEEE Conference on Decision and Control.DOI
815. Liangyong Wang, Tianyou Chai, Zheng Fang (2009). Neural-network-based two-loop control of robotic manipulators including actuator dynamics in task space.DOI
816. Yue Fu, Tianyou Chai (2009). Intelligent Decoupling Control of Nonlinear Multivariable Systems and its Application to a Wind Tunnel System. IEEE Transactions on Control Systems Technology.DOI
817. Yonggang Wang, Tianyou Chai, Lianfei Zhai (2009). Nonlinear multiple models adaptive decoupling PID control based on generalized predictive control. Asian Control Conference.
818. P. Zhou, Tianyou Chai, Tongxin Chen (2009). Decoupling Internal Model Control Method for Operation of Industrial Process: Decoupling Internal Model Control Method for Operation of Industrial Process.DOI
819. Zheng Fang, Yanhua Fu, Tianyou Chai (2009). A low-cost modular robot for research and education of control systems, mechatronics and robotics. IEEE Conference on Industrial Electronics and Applications.DOI
820. P. Zhou, Tianyou Chai, Hong Wang (2009). Intelligent Optimal-Setting Control for Grinding Circuits of Mineral Processing Process. IEEE Transactions on Automation Science and Engineering.DOI
821. Yong-Fu Wang, Dian-Hui Wang, Tianyou Chai (2009). Modeling and control compensation of nonlinear friction using adaptive fuzzy systems.DOI
822. Liangyong Wang, Tianyou Chai, Lianfei Zhai (2009). Neural-Network-Based Terminal Sliding-Mode Control of Robotic Manipulators Including Actuator Dynamics. IEEE transactions on industrial electronics (1982. Print).DOI
823. Nai-Wei Tu, Hui Huang, Tian-Mu Ma, Binglin Zheng, Tianyou Chai (2009). Model and algorithm of integrated lot planning for steelmaking-continous casting-hot rolling. Chinese Control and Decision Conference.DOI
824. Li Li, Xiao-Dong Liu, Tianyou Chai (2009). New approaches on Hinfinity control of T-S fuzzy systems with interval time-varying delay. Fuzzy Sets Syst..DOI
825. Ye-Feng Liu, Gang Yu, Binglin Zheng, Tianyou Chai (2009). Production indices prediction model of ore dressing process based on PCA-GA-BP neural network. Chinese Control and Decision Conference.DOI
826. Yue Fu, Tianyou Chai, Hong Wang (2009). Stable multiple model adaptive control of nonlinear multivariable discrete-time systems. American Control Conference.DOI
827. Tianyou Chai (2009). Optimal operation and feedback control for complex industrial process. International Conference on Networking, Sensing and Control.DOI
828. Xubin Sun, Jinliang Ding, Tianyou Chai, Hong Wang (2009). Neural Networks Based Probability Density Function Control for Stochastic Systems.DOI
829. Chenguang Yang, Tianyou Chai, Lianfei Zhai, S. Ge, Tong-Heng Lee (2009). Semi-parametric adaptive control of discrete-time nonlinear systems. 2009 IEEE International Conference on Automation and Logistics.DOI
830. Yue Fu, Tianyou Chai (2009). Indirect self-tuning control of a nonlinear non-minimum phase system. IEEE Conference on Decision and Control.DOI
831. Sheng-Ping Yu, Rui-Xia Lv, Binglin Zheng, Tianyou Chai (2009). Simulation system for logistics in steelmaking process based on Flexsim. Chinese Control and Decision Conference.DOI
832. P. Zhou, Tianyou Chai, Qiang Liu, Hong Wang, Chun-Yi Su (2009). Frequency-domain weighted RLS model reduction for complex SISO linear system. American Control Conference.DOI
833. Yong-Jian Wu, Zhiwei Wu, Bin Dong, Li Zhang, Tianyou Chai (2009). The hybrid intelligent control for the fused magnesia production. IEEE Conference on Decision and Control.DOI
834. Ya-Jun Zhang, Tianyou Chai, Yue Fu, H. Niu (2009). Nonlinear adaptive control method based on ANFIS and multiple models. IEEE Conference on Decision and Control.DOI
835. Qiu-Mei Cong, Wen Yu, Tianyou Chai (2009). Hierarchical neural network model for water quality prediction in wastewater treatment plants.DOI
836. Chai Tian-you (2009). Application of Rough Set to Analysis of Mineral Processing Product Cost. Control Engineering of China.
837. Lei Guo, Liping Yin, Hong Wang, Tianyou Chai (2009). Entropy Optimization Filtering for Fault Isolation of Nonlinear Non-Gaussian Stochastic Systems. IEEE Transactions on Automatic Control.DOI
838. Jinliang Ding, Qi Chen, Tianyou Chai, Hong Wang, Chun-Yi Su (2009). Data mining based feedback regulation in operation of hematite ore mineral processing plant. American Control Conference.DOI
839. Tianyou Chai (2009). Plant-Wide Production Processes: Challenges on Optimal Control.DOI
840. Chun-Yu Yang, Qing-Ling Zhang, Tianyou Chai (2009). Observer design for a class of nonlinear descriptor systems. IEEE Conference on Decision and Control.DOI
841. Hong Wang, Tianyou Chai, Jinliang Ding, Martin Brown (2009). Data Driven Fault Diagnosis and Fault Tolerant Control: Some Advances and Possible New Directions.DOI
842. P. Afshar, Hong Wang, Tianyou Chai (2009). An ILC-Based Adaptive Control for General Stochastic Systems With Strictly Decreasing Entropy. IEEE Transactions on Neural Networks.DOI
843. Wei Wang, Li-Jie Zhao, Tianyou Chai (2009). Multivariable nonlinear dynamic modeling based on DPLS and Hammerstein model and its application. IEEE Conference on Decision and Control.DOI
844. Liyan Zhang, Heng Yue, Tianyou Chai (2009). The intelligent setting control of the mill load in pulverizing system for an alumina sintering process. IEEE Conference on Decision and Control.DOI
845. Wei-Tao Li, Kezhi Mao, Xiao-Jie Zhou, Tianyou Chai, Hong Zhang (2009). Eigen-flame image-based robust recognition of burning states for sintering process control of rotary kiln. IEEE Conference on Decision and Control.DOI
846. Ying Feng, C. Rabbath, Tianyou Chai, Chun-Yi Su (2009). Robust adaptive control of systems with hysteretic nonlinearities: A Duhem hysteresis modelling approach. IEEE Region 8 Conference AFRICON.DOI
847. Zheng Fang, Yu-Cheng Qi, Qichun Zhang, Tianyou Chai (2009). Design and implementation of a low cost dsp based rapid control prototyping system. IEEE Conference on Industrial Electronics and Applications.DOI
848. Rui Bai, Shaocheng Tong, Tianyou Chai (2009). Intelligent prediction method of technical indices in the industrial process and its application. IEEE Conference on Decision and Control.DOI
849. Tianyou Chai, Liyan Zhang, Chun-Yi Su, Hong Wang (2009). An Intelligent Mill Load Switching Control of the Pulverizing System for an Alumina Sintering Process. IEEE Transactions on Control Systems Technology.DOI
850. Yu-Jing Shi, Tianyou Chai, Hong Wang, Chun-Yi Su (2009). Delay-dependent robust model predictive control for time-delay systems with input constraints. American Control Conference.DOI
851. Bai Rui, Tong Shaocheng, Jian Zhang, Chai Tian-you (2009). Prediction model of quality indices based-on RBF neural network in the raw slurry blending process. IEEE International Conference on Automation and Logistics (ICAL).DOI
852. Rujiu Liu, Zhenshan Zhang, Chai Tian-you (2009). A dynamic simulation system for secondary cooling process in continuous slab casting.DOI
853. Huang Hui, Naiwei Tu, Tianmu Ma, Binglin Zheng, Chai Tian-you (2009). Vehicle routing problem based model and ant colony optimization algorithm for group charge problem of ingot casting. Chinese Control and Decision Conference (CCDC).DOI
854. Chai Tian-you (2009). Optimization control of ball mill load in blending process with data fusion and case-based reasoning.
855. Chai Tian-you (2009). Hybrid Intelligent Control Method for Laminar Cooling Process of Hot Rolled Strip. Journal of Northeastern University.
856. Chai Tian-you (2009). Adaptive Neural Network Control for a Class of Nonlinear Discrete-Time Systems. Journal of Northeastern University.
857. Chai Tian-you (2009). Adaptive Internal Model Control Method and Its Application to Grinding Process. Control Engineering of China.
858. Chai Tian-you (2009). Optimization Control of the Raw Slurry Blending Process Based on the PSO Algorithm. Control Engineering of China.
859. Chai Tian-you (2009). Simulation Platform for Optimal Operation and Control of Roasting Process in Shaft Furnace. Journal of Northeastern University.
860. Chai Tian-you (2009). Distributed Simulation Platform for Decoupling Control of Evaporation Process. Jisuanji fangzhen.
861. Chai Tian-you (2009). Approach for Determining Technical Indices in Mineral Process and its Applications. Control Engineering of China.
862. Chai Tian-you (2009). Adaptive Neural Network Control of Discrete-Time Nonlinear Systems with Triangular-Form. Journal of Northeastern University.
863. Chai Tian-you (2009). Design and Development of Charge Plan Simulation System for Steelmaking. Jisuanji fangzhen.
864. Chai Tian-you (2009). Hybrid Intelligent Modeling of Ball Mill Coal Pulverizing Process. Control Engineering of China.
865. 耿增显，柴天佑（2008）. 基于LS-SVM的浮选过程工艺技术指标软测量. 《系统仿真学报》.DOI
866. 孙鹏，柴天佑，周晓杰，岳恒（2008）. 氧化铝回转窑烧成带火焰图像识别系统. 《化工学报》.
867. 片锦香，柴天佑（2008）. 层流冷却过程混合智能参数辨识. 《控制理论与应用》.
868. 严爱军，柴天佑，王普（2008）. 基于参量预报的磁选管回收率智能优化控制. 《控制理论与应用》.
869. 周平，柴天佑（2008）. 磨矿过程磨机负荷的智能监测与控制. 《控制理论与应用》.
870. 严爱军，柴天佑，王普（2008）. 基于案例推理的竖炉故障预报系统. 《控制与决策》.
871. 耿增显，柴天佑，岳恒（2008）. 浮选药剂智能优化设定控制方法的研究. 《仪器仪表学报》.DOI
872. 严爱军，柴天佑，高学金，王普（2008）. 燃烧过程空燃比的智能控制方法. 《北京工业大学学报》.
873. 姜慧研，王晓丹，周晓杰，柴天佑（2008）. 基于SVR的回转窑烧成带温度软测量方法的研究. 《系统仿真学报》.DOI
874. 王永刚，柴天佑（2008）. 蒸发过程的非线性模型预测控制. 《东北大学学报(自然科学版)》.
875. 周平，岳恒，郑秀萍，柴天佑（2008）. 磨矿过程的多变量模糊监督控制. 《控制与决策》.DOI
876. 王永富，赵宏，刘积仁，柴天佑（2008）. 基于模糊辨识的混合鲁棒自适应控制. 《系统仿真学报》.
877. 贾佳，潘莉，屠乃威，郑秉霖，柴天佑（2008）. 热轧批量计划多目标智能优化编制新方法. 《控制工程》.
878. 白锐，柴天佑（2008）. 生料浆配料过程的优化设定软件. 《控制工程》.
879. 耿增显，柴天佑，岳恒（2008）. 浓密机生产过程综合自动化系统. 《控制工程》.
880. 刘金鑫，柴天佑，白锐（2008）. 赤铁矿强磁选过程综合自动化系统. 《控制工程》.
881. 张天霄，王永富，柴天佑（2008）. 基于RBF神经网络的摩擦补偿建模与控制. 《控制工程》.
882. 刘玉平，翟廉飞，柴天佑（2008）. 基于神经网络和多模型的非线性自适应PID控制及应用. 《化工学报》.
883. 吴永建，张莉，岳恒，柴天佑（2008）. 基于案例推理的电熔镁炉智能优化控制. 《化工学报》.
884. 黄辉，马天牧，郑秉霖，柴天佑（2008）. 炼钢MES计划调度一体化. 《自动化仪表》.
885. 柴天佑，丁进良，王宏，苏春翌（2008）. 复杂工业过程运行的混合智能优化控制方法. 《自动化学报》.
886. 白锐，柴天佑（2008）. 碱赤泥浆流量的非线性智能PID控制. 《控制理论与应用》.
887. 石宇静，柴天佑（2008）. 基于神经网络与多模型的非线性自适应广义预测解耦控制. 《控制理论与应用》.
888. Lianfei Zhai, Chenguang Yang, S. Ge, Tianyou Chai, Tong-Heng Lee (2008). Direct Adaptive NN Control of MIMO Nonlinear Discrete-Time Systems using Discrete Nussbaum Gain.DOI
889. Chenguang Yang, S. Ge, C. Xiang, Tianyou Chai, Tong H. Lee (2008). Output Feedback NN Control for Two Classes of Discrete-Time Systems With Unknown Control Directions in a Unified Approach. IEEE Transactions on Neural Networks.DOI
890. Hui-yan Jiang, Yan Huo, Xiao-Jie Zhou, Tianyou Chai (2008). Optimization Approach of Sintering Feature Parameter Based on Fuzzy SVM. 2008 International Symposiums on Information Processing.DOI
891. Xiao-Jie Zhou, Heng Yue, Tianyou Chai (2008). Reinforcement Learning-Based Supervisory Control Strategy for a Rotary Kiln Process.DOI
892. Jinliang Ding, Chang-Xin Liu, M. Wen, Tianyou Chai (2008). Case-Based Decision Making Model for Supervisory Control of Ore Roasting Process. International Symposium on Neural Networks.DOI
893. P. Zhou, Tianyou Chai, Hong Wang, Chun-Yi Su (2008). Multivariable decoupling internal model control for grinding circuit. American Control Conference.DOI
894. Feng-Hua Wu, Tianyou Chai, Wen Yu (2008). Fuzzy mechanistic model with neural compensation for Estimation of shaft furnace's product quality.DOI
895. Jin-Xin Liu, Jin-Ling Liu, Jinliang Ding, Tianyou Chai (2008). Intelligent control for operation of iron ore magnetic separating process. World Congress on Intelligent Control and Automation.DOI
896. Jinghui Qiao, Xiao-Jie Zhou, Xiu-Ping Zheng, Heng Yue, Tianyou Chai (2008). Intelligent control method of clinker grid type cooling machine cooling procedure.
897. Yu-Jing Shi, Tianyou Chai, Heng Yue (2008). Robust One-step Model Predictive Control for Discrete Time-delay Systems.DOI
898. Yue Fu, Tianyou Chai, Heng Yue (2008). Intelligent control using multiple models and neural networks.DOI
899. Yonggang Wang, Jinliang Ding, Tianyou Chai (2008). Soft-sensor for alkaline solution concentration of evaporation process. World Congress on Intelligent Control and Automation.DOI
900. Bin Dong, Li Zhang, Yong-Jian Wu, Jian Feng, Tianyou Chai (2008). The fuzzy control research on electrodes of electrical-fused magnesia furnace. Chinese Control and Decision Conference.DOI
901. Lianfei Zhai, Tianyou Chai, Chenguang Yang, S. Ge, Tong-Heng Lee (2008). Stable adaptive neural network control of MIMO nonaffine nonlinear discrete-time systems. IEEE Conference on Decision and Control.DOI
902. Chai Tian-you (2008). New Method of Multi-objective Intelligent Optimization for Hot Rolling Batch Planning. Control Engineering of China.
903. Jinxiang Pian, Tianyou Chai, Ming-Hao Tan (2008). Hybrid intelligent parameter identification of the laminar cooling process for hot strip. World Congress on Intelligent Control and Automation.DOI
904. Wen-Jun Jia, Tianyou Chai, Wen Yu (2008). A novel hybrid neural network for modeling rare-earth extraction process.DOI
905. Yong-Fu Wang, Hong Zhao, Ji-Ren Liu, Tianyou Chai (2008). Application of multi-task design method based on linux for PET real-time control. World Congress on Intelligent Control and Automation.DOI
906. Tianyou Chai, Jinliang Ding, Feng-Hua Wu (2008). Hybrid Intelligent Control for Optimal Operation of Shaft Furnace Process.DOI
907. Rui Bai, En-Jie Ma, Tianyou Chai (2008). Estimation for the mill load state with data fusion in the blending process. Chinese Control and Decision Conference.DOI
908. Zeng-Xian Geng, Tianyou Chai, Heng Yue, Hong Wang, Chun-Yi Su (2008). Intelligent Control for Flotation Process.DOI
909. Aijun Yan, Tianyou Chai, Feng-Hua Wu, Pu Wang (2008). Hybrid intelligent control of combustion process for ore-roasting furnace.DOI
910. Rui Bai, Tianyou Chai, En-Jie Ma (2008). Optimizing operation control system for the blending process in alumina production. World Congress on Intelligent Control and Automation.DOI
911. Chenguang Yang, Lianfei Zhai, S. Ge, Tianyou Chai, Tong-Heng Lee (2008). Adaptive model reference control of a class of MIMO discrete-time systems with compensation of nonparametric uncertainty. American Control Conference.DOI
912. Zeng-Xian Geng, Tianyou Chai, Heng Yue (2008). A method of hybrid intelligent optimal setting control for flotation process. World Congress on Intelligent Control and Automation.DOI
913. Hui-yan Jiang, Yan Huo, Xiao-Jie Zhou, Tianyou Chai (2008). Abnormal State Diagnosis of Sintering Image Based on SVM. International Congress on Image and Signal Processing.DOI
914. Hui-yan Jiang, Yan Huo, Xiao-Jie Zhou, Tianyou Chai (2008). State recognition of rotary kiln sintering based on genetic algorithm and neural network. Chinese Control and Decision Conference.DOI
915. Xin-Fu Pang, Sheng-Ping Yu, Binglin Zheng, Tianyou Chai (2008). Complete Modification Rescheduling Method and Its Application for Steelmaking and Continuous Casting.DOI
916. Yongfu Wang, Hong Zhao, Jiren Liu, Tianyou Chai (2008). Fuzzy modeling method based on data mining. World Congress on Intelligent Control and Automation.DOI
917. Qiumei Cong, Tianyou Chai, Wen Yu (2008). Cascade Process Modeling with Mechanism-Based Hierarchical Neural Networks. IFAC Proceedings Volumes.DOI
918. Huiyan Jiang, Xiaojie Zhou, Chai Tian-you (2008). An prediction approach of sintering state in rotary kiln based on image analysis. Chinese Control and Decision Conference (CCDC).DOI
919. Chai Tian-you (2008). Intelligent monitoring and control of mill load for grinding processes. Control theory & applications.
920. Chai Tian-you (2008). Study on Soft Sensor for Temperature of Burning Zone Based on SVR. Jisuanji fangzhen.
921. Chai Tian-you (2008). FCM Segmentation for Flame Image of Rotary Kiln Based on Texture Coarseness. Jisuanji fangzhen.
922. Chai Tian-you (2008). Distributed Simulation Platform for Optimizing Control of Mineral Grinding Process. Jisuanji fangzhen.
923. Chai Tian-you (2008). Soft Sensor of Technical Indices Based on LS-SVM for Flotation Process. Jisuanji fangzhen.
924. Chai Tian-you (2008). Intelligently Optimal Index Setting for Flotation Process by CBR. Journal of Northeastern University.
925. Chai Tian-you (2008). Nonlinear adaptive PID control using neural networks and multiple models and its application. Journal of Chemical Industry and Engineering.
926. Aijun Yan, Xuejin Gao, Pu Wang, Chai Tian-you (2008). Product quality-oriented intelligent evaluation system. World Congress on Intelligent Control and Automation.DOI
927. Chai Tian-you (2008). Application of PSO to Multimodel Self-Tuning Dynamic Matrix Control. Journal of Northeastern University.
928. Chai Tian-you (2008). Hybrid Robust Adaptive Control Based on Fuzzy Identification. Jisuanji fangzhen.
929. Chai Tian-you (2008). Optimal Setting Software for Blending Process of Raw Slurry. Control Engineering of China.
930. Chai Tian-you (2008). Object-Oriented Application of Image Processing System in Complex Industrial Process. Journal of Northeastern University.
931. Chai Tian-you (2008). Nonlinear Model Predictive Control of Evaporation Process. Journal of Northeastern University.
932. Chai Tian-you (2008). Study on Simulation Model of Ball Mill Outlet Temperature with Delay Compensation. Jisuanji fangzhen.
933. Chai Tian-you (2008). Compensating Modeling and Control of Friction Based on RBF Neural Network. Control Engineering of China.
934. Chai Tian-you (2008). Method and Realization of Optimization Setting Control for High Intensity Magnetic Separating Process of Metallurgy Industry. Jisuanji fangzhen.
935. Chai Tian-you (2008). Nonlinear adaptive decoupling generalized predictive control using neural networks and multiple models. Control theory & applications.
936. Heng Yue, Han-Xiong Li, Tianyou Chai (2007). Direct neural network-based self-tuning control for a class of nonlinear systems. International Journal Of Systems Science, Vol. 380, No. 8.DOI
937. 周平，柴天佑（2007）. 基于案例推理的磨矿粒度软测量及其软件实现. 《系统仿真学报》.
938. 张海军，岳恒，柴天佑，崔宇（2007）. 基于小波分解的非线性系统多模型自适应控制. 《计算机仿真》.
939. 王伟，柴天佑（2007）. 第六届全球智能控制与自动化大会概况. 《控制工程》.
940. 柴天佑（2007）. 节能降耗设计、制造、管理一体化MES发展趋势. 《机械设计与制造工程》.
941. 柴天佑，褚建，本刊编辑部，崔荣会，白云川，刘萍，李俊俊，钱敏瑾，孟捷（2007）. 在线管理节能增效 MES惠及中国制造. 《机械设计与制造工程》.
942. 白锐，柴天佑，马恩杰（2007）. 生料浆配料过程综合自动化系统. 《系统仿真学报》.
943. 贾文君，柴天佑（2007）. 稀土串级萃取分离过程元素组分含量的多模型软测量. 《控制理论与应用》.
944. 郭广，白锐，柴天佑（2007）. 烧结法配料过程计算机控制系统. 《控制工程》.
945. 铁鸣，柴天佑，岳恒，张振山，郑秀萍（2007）. 冷连轧动态过程混合智能建模方法. 《自动化学报》.DOI
946. 马恩杰，柴天佑（2007）. 基于粒子群算法的选矿日综合生产指标优化分解方法. 《计算机集成制造系统》.DOI
947. 石宇静，柴天佑（2007）. 基于神经网络与多模型的非线性自适应广义预测控制. 《自动化学报》.
948. 张立岩，岳恒，张君，丁进良，柴天佑（2007）. 基于最小二乘-支持向量机的制粉过程煤粉细度软测量模型. 《清华大学学报(自然科学版)》.
949. Tianyou Chai, Feng-Hua Wu, Jinliang Ding, Chun-Yi Su (2007). Intelligent work-situation fault diagnosis and fault-tolerant system for the shaft-furnace roasting process.DOI
950. Tianyou Chai, Jin-Xin Liu, Jinliang Ding, Chun-Yi Su (2007). Hybrid Intelligent Optimising Control for High-Intensity Magnetic Separating Process of Hematite Ore.DOI
951. Jinxiang Pian, Tianyou Chai, Hong Wang, Chun-Yi Su (2007). Hybrid Intelligent Forecasting Method of the Laminar Cooling Process for Hot Strip. American Control Conference.DOI
952. Yue Fu, Tianyou Chai, Chun-Yi Su, Hong Wang (2007). Intelligent decoupling control of nonlinear multivariable systems. IEEE Conference on Decision and Control.DOI
953. Chai Tian-you (2007). Dynamic Scheduling Method and Its Application for Steelmaking and Continuous Casting. Journal of Petrochemical Universities.
954. Xiao-Dong Liu, Wei Wang, Tianyou Chai, Wan-Quan Liu (2007). Approaches to the representations and logic operations of fuzzy concepts in the framework of axiomatic fuzzy set theory II. Information Sciences.DOI
955. Xiaodong Liu, Tianyou Chai, Wei Wang, Wan-Quan Liu (2007). Approaches to the representations and logic operations of fuzzy concepts in the framework of axiomatic fuzzy set theory I. Information Sciences.DOI
956. Zhi-Wei Gao, Hong Wang, Tianyou Chai (2007). A robust fault detection filtering for stochastic distribution systems via descriptor estimator and parametric gain design.DOI
957. Chai Tian-you (2007). Soft-sensor of element component content based on multiple models for the rare earth cascade extraction process. Control theory & applications.
958. Xiao-Jie Zhou, Tianyou Chai (2007). Pattern-based Hybrid Intelligent Control for Rotary Kiln Process. International Conference on Computability and Complexity in Analysis.DOI
959. Hui-Jun Gao, Tongwen Chen, Tianyou Chai (2007). Passivity and Passification for Networked Control Systems. SIAM Journal of Control and Optimization.DOI
960. P. Zhou, Jinliang Ding, Tianyou Chai, Hong Wang, Chun-Yi Su (2007). An intelligent approach for supervisory control of grinding product particle size. IEEE Conference on Decision and Control.DOI
961. Xiu-Ying Wang, Tianyou Chai, Jinfei Sun (2007). A Model Embedded the Intelligent Scheduling System for Steelmaking Production Process. International Conference on Innovative Computing, Information and Control.DOI
962. Rui Bai, Tianyou Chai, En-Jie Ma (2007). A Novel Approach for Extraction of Fuzzy Rules Using the Neuro-fuzzy Network and Its Application in the Blending Process of Raw Slurry. International Symposium on Neural Networks.DOI
963. Huaguang Zhang, Dedong Yang, Tianyou Chai (2007). Guaranteed Cost Networked Control for T–S Fuzzy Systems With Time Delays. IEEE Transactions on Systems Man and Cybernetics Part C (Applications and Reviews).DOI
964. Jinliang Ding, Yang Cao, Tianyou Chai, Hong Wang (2007). Interactive Software Platform of Intelligent Supervisory Control for the Mineral Grinding Process. International Conference on Computability and Complexity in Analysis.DOI
965. Lianfei Zhai, Tianyou Chai, S. Ge (2007). Stable Adaptive Neural Network Control of Nonaffine Nonlinear Discrete-Time Systems and Application. 2007 IEEE 22nd International Symposium on Intelligent Control.DOI
966. Chai Tian-you (2007). Product Quality Monitoring System for Roasting Process of Shaft Furnace. Journal of Northeastern University.
967. Yue Fu, Tianyou Chai (2007). Neural-Network-Based Nonlinear Adaptive Dynamical Decoupling Control. IEEE Transactions on Neural Networks.DOI
968. Yue Fu, Tianyou Chai (2007). Nonlinear multivariable adaptive control using multiple models and neural networks. at - Automatisierungstechnik.DOI
969. Tianyou Chai (2007). A Hybrid Intelligent Optimal Control Method for the Whole Production Line and Applications. IEEE International Conference on Integration Technology.DOI
970. Aijun Yan, Chai Tian-you, Pu Wang (2007). Intelligent Hybrid Prediction Method of Reducing Zone Temperature in Shaft Furnace. IEEE Conference on Industrial Electronics and Applications (ICIEA).DOI
971. Chai Tian-you (2007). Hybrid Intelligent Modeling and Simulation for Ore Grinding and Classification Process. Journal of Northeastern University.
972. Chai Tian-you (2007). Modeling and Simulation for Strip Tension in Continuous Annealing Process. Jisuanji fangzhen.
973. Chai Tian-you (2007). Pulverized coal particle size soft sensor based on the least squares support vector machines algorithm. Journal of Tsinghua University(Science and Technology).
974. Chai Tian-you (2007). Intelligent Control Setting with CBR for Ore Grinding-Classification System. Journal of Northeastern University.
975. Chai Tian-you (2007). A Case-Based Reasoning Soft-Sensor for Particle Size of Grinding Process and Its Software Development. Jisuanji fangzhen.
976. Chai Tian-you (2007). Multiple Models Adaptive Dynamic Matrix Control Based on PSO Online Optimization. Jisuanji fangzhen.
977. Chai Tian-you (2007). Optimization decomposition methods based on particle swarm algorithm for daily global production indices of mineral process.
978. Chai Tian-you (2007). Simulation System for Intelligent Optimal Control of Rare Earth Cascade Extraction Separation Process. Jisuanji fangzhen.
979. Chai Tian-you (2007). Design of Virtual Object of Tandem Cold Rolling Simulation System. Journal of Northeastern University.
980. 贾文君，柴天佑（2006）. 稀土串级萃取分离过程的双线性模型及其参数辨识. 《控制理论与应用》.
981. 富月，柴天佑（2006）. 一类非线性非最小相位系统的直接自适应控制. 《控制理论与应用》.
982. 陈友文，曹桂松，柴天佑（2006）. 板坯加热炉炉温控制策略的研究. 《自动化博览》.
983. 吴永建，周晓杰，柴天佑，岳恒（2006）. 氧化铝熟料烧结回转窑智能控制系统设计与应用. 《华东理工大学学报(自然科学版)》.
984. 吴峰华，丁进良，岳恒，柴天佑（2006）. 竖炉焙烧过程智能故障诊断系统. 《南京航空航天大学学报(自然科学版)》.
985. 周平，岳恒，赵大勇，柴天佑（2006）. 基于案例推理的软测量方法及在磨矿过程中的应用. 《控制与决策》.
986. 王永富，柴天佑（2006）. 机器人关节摩擦的自适应模糊补偿建模与控制. 《仪器仪表学报》.
987. 王秀英，柴天佑，郑秉霖（2006）. 炼钢-连铸智能调度软件的开发及应用. 《计算机集成制造系统》.
988. 周平，丁进良，岳恒，柴天佑（2006）. 基于相似粗糙集的案例特征权值确定新方法. 《信息与控制》.
989. 丁进良，岳恒，齐玉涛，柴天佑，郑秀萍（2006）. 基于遗传算法的磨矿粒度神经网络软测量. 《仪器仪表学报》.DOI
990. 富月，柴天佑，岳恒（2006）. 一类非线性多变量系统的多模型自适应解耦控制. 《控制与决策》.DOI
991. 岳恒，张海军，柴天佑（2006）. 基于混合粒子群算法的RBF神经网络参数优化. 《控制工程》.
992. 周平，丁进良，赵大勇，柴天佑（2006）. 实现粒度指标的磨矿过程智能优化控制系统. 《控制工程》.
993. 王永富，柴天佑（2006）. 自适应模糊控制理论的研究综述. 《控制工程》.
994. 严爱军，丁进良，柴天佑（2006）. 竖炉焙烧过程综合自动化系统. 《控制工程》.
995. 王伟，柴天佑（2006）. 工业中应用的控制技术发展新动向. 《控制工程》.
996. 陈友文，孟庆国，柴天佑（2006）. 中板加热炉综合自动化系统. 《第十一届全国自动化应用技术学术交流会论文集》.
997. 马恩杰，丁进良，柴天佑（2006）. 选矿企业关键生产指标优化技术概述. 《全国炼钢连铸过程自动化技术交流会论文集》.
998. 严爱军，柴天佑，岳恒（2006）. 竖炉焙烧过程的多变量智能优化控制. 《自动化学报》.
999. Tianyou Chai (2006). A hybrid intelligent optimal control method for the whole production line and applications. International Symposium on Mechatronics and its Applications.DOI
1000. Yong-Fu Wang, Hong Zhao, Ji-Ren Liu, Tianyou Chai (2006). Robust Adaptive Fuzzy Control for a Class of Nonlinear Systems. World Congress on Intelligent Control and Automation.DOI
1001. Jinliang Ding, P. Zhou, Chang-Xin Liu, Tianyou Chai (2006). Hybrid Intelligent System for Supervisory Control of Mineral Grinding Process. Sixth International Conference on Intelligent Systems Design and Applications.DOI
1002. Ming-Hao Tan, Shujiang Li, Tianyou Chai (2006). Hybrid Intelligent Control Strategy of the Laminar Cooling Process. International Symposium on Neural Networks.DOI
1003. Yue Fu, Tianyou Chai, Hong Wang (2006). Nonlinear indirect adaptive decoupling control based on neural networks and multiple models. American Control Conference.DOI
1004. Lianfei Zhai, Tianyou Chai (2006). Nonlinear decoupling PID control using neural networks and multiple models.DOI
1005. Pei-Chang Wang, Jinliang Ding, Tianyou Chai (2006). Intelligent Control for Ore-distributing Process. World Congress on Intelligent Control and Automation.DOI
1006. Lei Guo, Hong Wang, Tianyou Chai (2006). Fault detection for non-linear non-Gaussian stochastic systems using entropy optimization principle.DOI
1007. Da-yong Zhao, Tianyou Chai, Heng Yue, P. Zhou (2006). Intelligent method with case-based reasoning for setpoints optimization and its application. International Symposium on Instrumentation and Control Technology.DOI
1008. P. Zhou, Tianyou Chai, Heng Yue, Jinliang Ding, Da-yong Zhao (2006). Intelligent Optimal Control of Grinding Circuits for Optimization of Particle Size Index. World Congress on Intelligent Control and Automation.DOI
1009. Ming-Hao Tan, Shujiang Li, Jinxiang Pian, Tianyou Chai (2006). Case-Based Modeling of the Laminar Cooling Process in a Hot Rolling Mill.DOI
1010. Lianfei Zhai, Tianyou Chai (2006). Intelligent Decoupling PID Control of a Class of Complex Industrial Processes. World Congress on Intelligent Control and Automation.DOI
1011. Xiao-Dong Liu, Tianyou Chai, Wei Wang (2006). AFS FUZZY LOGIC SYSTEM AND ITS APPLICATIONS TO MODEL AND CONTROL.
1012. Xiao-Jie Zhou, Heng Yue, Tianyou Chai, Binhao Fang (2006). Supervisory Control for Rotary Kiln Temperature Based on Reinforcement Learning.DOI
1013. Li-Jie Zhao, Tianyou Chai, Qiu-Mei Cong (2006). Hybrid Dynamic Model of Anoxic-Aeration Biological Wastewater Treatment Plant. World Congress on Intelligent Control and Automation.DOI
1014. Zheng-Jun Yu, Tianyou Chai (2006). Supervisory Control for Co-inject Hot Metal Desulfuration Processes. World Congress on Intelligent Control and Automation.DOI
1015. Yue Fu, Tianyou Chai (2006). Direct Adaptive Decoupling Control of Nonlinear Systems Based on Neural Networks and Multiple Models. World Congress on Intelligent Control and Automation.DOI
1016. Xiaodong Liu, Tianyou Chai, Wei Wang, Wan-Quan Liu (2006). of fuzzy concepts in the framework of axiomatic.
1017. Wen-Jun Jia, Tianyou Chai, Hui Yang (2006). A Hybrid Intelligent Soft-Sensor Method for the Rare Earth Cascade Extraction Process. World Congress on Intelligent Control and Automation.DOI
1018. Li-Jie Zhao, Tianyou Chai, Qiu-Mei Cong (2006). Operating Condition Recognition of Pre-denitrification Bioprocess Using Robust EMPCA and FCM. World Congress on Intelligent Control and Automation.DOI
1019. Ming-Hao Tan, Xue-Jun Zong, Heng Yue, Jinxiang Pian, Tianyou Chai (2006). Laminar Cooling Process Model Development Using RBF Networks. International Symposium on Neural Networks.DOI
1020. Huaguang Zhang, Wei Huang, Zhi-Liang Wang, Tianyou Chai (2006). Adaptive synchronization between two different chaotic systems with unknown parameters.DOI
1021. H. Yue, Hong Wang, Jin-Fang Zhang, Tianyou Chai (2006). Tracking performance comparison for different strategies in output PDF control. American Control Conference.DOI
1022. Xiu-Ying Wang, Sheng-Ping Yu, Binglin Zheng, Tianyou Chai (2006). Intelligent Scheduling System of Steelmaking and Continuous Casting Based On ERP/MES/PCS. World Congress on Intelligent Control and Automation.DOI
1023. Xiaoling Huang, Xiuquan Chen, Tianyou Chai (2006). Research and Application of the MES for Realizing Optimization of Production Indexes of Mineral Processing. World Congress on Intelligent Control and Automation.DOI
1024. Erbin Ma, Tianyou Chai, R. Bai (2006). The Optimization Methods Based on Non-dominated Sorting Genetic Algorithm for Scheduling of Material Flow in Mineral Process.DOI
1025. Xiuying Wang, Jinfei Sun, Yang Ai-guang, Tianyou Chai (2006). The Design and Development of A Scheduling System for Steelmaking and Continuous Casting based on Component Technology. International Conference on Intelligent Systems Design and Applications (ISDA).DOI
1026. Yongjian Wu, Tan Minghao, Zhou Xiaojie, Chai Tian-you (2006). The Design and Application of Hybrid Intelligent Control System for Rotary Kiln Process in Alumina Production. Chinese Control Conference (CCC).DOI
1027. Chai Tian-you (2006). Present Status and Future Developments of Adaptive Fuzzy Control. Control Engineering of China.
1028. Chai Tian-you (2006). Bilinear model of rare earth cascade extraction process and its parameter identification. Control theory & applications.
1029. Chai Tian-you (2006). Strategic Study of RBF Neural Network Parameter Optimization. Control Engineering of China.
1030. Chai Tian-you (2006). Intelligent Optimizing Control System of Grinding Process for Particle Size Index. Control Engineering of China.
1031. Chai Tian-you (2006). Engineering implement of dynamic subsystem in steelmaking and continuous casting scheduling system. Metallurgical Industry Automation.
1032. Wenjun Jia, Tianyou Chai, Hong Wang, Chun‐Yi Su (2006). Multiple Bilinear Models Based Soft-Sensor for Rare Earth Cascade Extraction Processes. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
1033. 马天牧，张蕾，胡国奋，郑秉霖，柴天佑（2005）. 冶铸轧一体化批量计划编制新技术. 《控制工程》.
1034. 柴天佑（2005）. 实现综合生产指标优化的工业过程智能综合自动化系统. 《05'中国自动化产业高峰会议暨中国企业自动化和信息化建设论坛论文集》.
1035. 佟绍成，柴天佑（2005）. 一类MIMO非线性系统的自适应模糊输出反馈控制. 《电子学报》.
1036. 赵大勇，岳恒，周平，柴天佑（2005）. 基于智能优化控制的磨矿过程综合自动化系统. 《第16届中国过程控制学术年会暨第4届全国故障诊断与安全性学术会议论文集》.
1037. 严爱军，柴天佑（2005）. 竖炉燃烧室温度的智能控制方法及应用. 《第16届中国过程控制学术年会暨第4届全国故障诊断与安全性学术会议论文集》.
1038. 庞新富，俞胜平，刘炜，郑秉霖，柴天佑（2005）. 炼钢连铸动态智能调度系统的研究与开发. 《控制工程》.
1039. 王秀英，郑秉霖，柴天佑（2005）. 面向MES的炼钢-连铸协同调度系统. 《控制工程》.
1040. 柴天佑，杨辉，张肃宇，李健（2005）. 稀土萃取分离过程综合自动化系统. 《控制工程》.
1041. 王霞，李健，张肃宇，柴天佑（2005）. 稀土萃取过程智能控制系统. 《有色冶金设计与研究》.
1042. 谭明皓，柴天佑（2005）. 层流冷却过程喷水系统的智能设定方法. 《控制与决策》.DOI
1043. 严爱军，柴天佑（2005）. 磁选管回收率智能混合预报方法. 《信息与控制》.
1044. 赵立杰，柴天佑，黄肖玲（2005）. 城市污水处理过程综合自动化系统及其应用. 《计算机集成制造系统》.
1045. 严爱军，岳恒，赵大勇，柴天佑（2005）. 一类复杂工业过程的智能预报模型及其应用. 《控制与决策》.
1046. 王永富，柴天佑，迟瑛，佟绍成（2005）. 基于观测器的一类非线性系统的自适应模糊控制. 《控制理论与应用》.
1047. 杨辉，柴天佑（2005）. 稀土萃取分离过程的优化设定控制. 《控制与决策》.
1048. 柴天佑（2005）. 科研、开发、应共促MES发展. 《机械设计与制造工程》.
1049. 柴天佑（2005）. 集成创新发展中国的自动化技术及产业. 《机械设计与制造工程》.
1050. 谭明皓，柴天佑（2005）. 基于案例推理的层流冷却过程建模. 《控制理论与应用》.
1051. 柴天佑，郑秉霖，胡毅，黄肖玲（2005）. 制造执行系统的研究现状和发展趋势. 《控制工程》.
1052. Hui Yang, Chong-Hui Song, Chun-Yan Yang, Tianyou Chai (2005). Component Content Soft-Sensor Based on Adaptive Fuzzy System in Rare-Earth Countercurrent Extraction Process. International Conference on Fuzzy Systems and Knowledge Discovery.DOI
1053. Xiao-Dong Liu, Wei Wang, Tianyou Chai (2005). The fuzzy clustering analysis based on AFS theory. IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics).DOI
1054. Chong-Hui Song, Shu-Chen Yang, Hui Yang, Huaguang Zhang, Tianyou Chai (2005). A Dual-Mode Fuzzy Model Predictive Control Scheme for Unknown Continuous Nonlinear System. International Conference on Fuzzy Systems and Knowledge Discovery.DOI
1055. Xin Wang, Shaoyuan Li, Wen-Jian Cai, Heng Yue, Xiao-Jie Zhou, Tianyou Chai (2005). Multi-model direct adaptive decoupling control with application to the wind tunnel system. ISA transactions.DOI
1056. Chong-Hui Song, Tianyou Chai (2005). Comment on "Discrete-time optimal fuzzy controller design: global concept approach". IEEE transactions on fuzzy systems.DOI
1057. Lianfei Zhai, Tianyou Chai, Yu-Jing Shi (2005). Nonlinear Multivariable Decoupling PID Control Using Neural Networks. International Conference on Neural Networks and Brain.DOI
1058. Tianyou Chai, Jinliang Ding, Da-yong Zhao, Aijun Yan (2005). INTEGRATED AUTOMATION SYSTEM OF MINERALS PROCESSING AND ITS APPLICATIONS.DOI
1059. Qiu-Mei Cong, Tianyou Chai (2005). Effluent COD of SBR Process Prediction Model Based on Fuzzy-Neural Network. International Conference on Neural Networks and Brain.DOI
1060. Yong-Fu Wang, Hong Zhao, Ji-Ren Liu, Tianyou Chai (2005). Fuzzy modeling method based on data mining. World Congress on Intelligent Control and Automation.DOI
1061. Li-Jie Zhao, Tianyou Chai (2005). Wastewater BOD Forecasting Model for Optimal Operation Using Robust Time-Delay Neural Network. International Symposium on Neural Networks.DOI
1062. Hui Yang, Chun-Yan Yang, Chong-Hui Song, Tianyou Chai (2005). Intelligent Optimal Control in Rare-Earth Countercurrent Extraction Process via Soft-Sensor. International Conference on Computing, Networking and Communications.DOI
1063. Li-Jie Zhao, Tianyou Chai, Qiu-Mei Cong (2005). EVENT-DRIVEN OPERATION PROCESS MONITORING OF SBR WASTEWATER PROCESS.DOI
1064. Ming Tie, Heng Yue, Tianyou Chai (2005). A Hybrid Intelligent Soft-Sensor Model for Dynamic Particle Size Estimation in Grinding Circuits. International Symposium on Neural Networks.DOI
1065. Yong-Fu Wang, Tianyou Chai, Li-Jie Zhao, Ming Tie (2005). Compensating Modeling and Control for Friction Using RBF Adaptive Neural Networks. International Symposium on Neural Networks.DOI
1066. Hui-Ying Li, Xin-Fu Pang, Binglin Zheng, Tianyou Chai (2005). THE ARCHITECTURE OF MANUFACTURING EXECUTION SYSTEM IN IRON & STEEL ENTERPRISE.DOI
1067. Yong-Fu Wang, Tianyou Chai (2005). Output-feedback control of uncertain nonlinear systems using adaptive fuzzy observer. Proceedings of the 2005, American Control Conference, 2005..DOI
1068. Tianyou Chai, Heng Yue, Lianfei Zhai (2005). INTELLIGENT DECOUPLING CONTROL SYSTEM OF COMPLEX INDUSTRIAL PROCESS AND APPLICATION.DOI
1069. Chai Tian-you (2005). Modeling of the laminar cooling process with case-based reasoning. Control theory & applications.
1070. Chai Tian-you, Xin Wang, Yue Heng (2005). Multivariable intelligent decoupling control and its applications. World Congress on Intelligent Control and Automation.DOI
1071. Lijie Zhao, Tianyou Chai, Qiumei Cong (2005). Multivariate statistical modeling and monitoring of SBR wastewater treatment using double moving window MPCA.DOI
1072. Huiying Li, Yi Cheng Hu, Tianyou Chai (2005). The study on integration of production command system in JG.DOI
1073. Xiaoling Huang, Wei Liu, Chunguang Chang, Tianyou Chai (2005). Production index setting of ore concentration material consumption by case-based reasoning.DOI
1074. Xiaoling Huang, Yangang Chu, Yi Cheng Hu, Tianyou Chai (2005). PRODUCTION PROCESS MANAGEMENT SYSTEM FOR PRODUCTION INDICES OPTIMIZATION OF MINERAL PROCESSING. IFAC Proceedings Volumes.DOI
1075. Chai Tian-you (2005). ADAPTIVE FUZZY CONTROL METHOD FOR DYNAMIC FRICTION COMPENSATION. Proceedings of the CSEE.
1076. Aijun Yan, Fenghua Wu, Chai Tian-you (2005). FAULT DIAGNOSIS EXPERT SYSTEM USING NEURAL NETWORKS FOR ROASTING PROCESS. IFAC Proceedings Volumes.DOI
1077. Chai Tian-you (2005). Adaptive Fuzzy Output Feedback Control for A Class of Nonlinear MIMO Systems. Acta Simulata Systematica Sinica.
1078. Chai Tian-you (2005). Intelligent Control System in Rare-Earth Extraction Process. Nonferrous Metals Engineering & Research.
1079. Chai Tian-you (2005). Intelligent Prediction Model for a Class of Complex Industrial Process and Its Application. Kongzhi yu juece.
1080. Chai Tian-you (2005). Research and Development of Steelmaking and Continuous Casting Dynamic Intelligence Scheduling System. Control Engineering of China.
1081. Chai Tian-you (2005). Adaptive Fuzzy Output Feedback Control for A Class of MIMO Nonlinear Systems. Dianzi xuebao.
1082. Chai Tian-you, Yang Hui (2005). Optimizing Control Parameter Settings in RE Extraction/Separation Process by CBR. Journal of Northeastern University.
1083. 王永富，柴天佑，岳恒（2004）. 机器人角速度两种软测量方法的PD控制对比. 《东北大学学报(自然科学版)》.
1084. 宋崇辉，王永富，柴天佑（2004）. 离散非线性系统模糊双模预测控制算法. 《东北大学学报(自然科学版)》.
1085. 刘威，李小平，毛慧欧，柴天佑（2004）. 基于实数编码遗传算法的神经网络成本预测模型及其应用. 《控制理论与应用》.
1086. 宋崇辉，柴天佑（2004）. 一类具有稳定性的广义预测控制算法. 《自动化学报》.
1087. 刘红波，李少远，柴天佑（2004）. 一种基于工况分解的热工过程非线性控制模型建立方法及应用. 《控制理论与应用》.
1088. 杨辉，张肃宇，李健，柴天佑（2004）. 应用软测量技术实现稀土萃取分离过程的优化控制. 《吉林大学学报(工学版)》.
1089. 黄肖玲，赵立杰，李慧莹，柴天佑（2004）. 基于四维一体的调度系统研究及在选矿厂的应用. 《控制与决策》.
1090. 刘威，王冠，柴天佑，苗忠国（2004）. 钢铁企业生产过程动态成本控制模式研究. 《控制工程》.
1091. 佟绍成，柴天佑（2004）. 非线性系统的直接自适应输出反馈监督模糊控制. 《控制与决策》.
1092. 赵立杰，柴天佑，王纲（2004）. 多元统计性能监视和故障诊断技术研究进展. 《信息与控制》.
1093. 刘威，张陶红，柴天佑（2004）. 基于神经网络的动态成本分析. 《信息与控制》.
1094. 王冠，史大为，郑秀萍，柴天佑（2004）. 冶金工业过程动态成本控制系统及应用研究. 《信息与控制》.
1095. 刘威，李慧莹，柴天佑（2004）. 基于模糊聚类RBF神经网络的生产指标预报模型. 《系统仿真学报》.DOI
1096. 杨辉，柴天佑（2004）. 稀土分离过程综合自动化系统研究. 《稀有金属》.
1097. 刘威，柴天佑（2004）. 智能推理技术在选矿物耗控制中的应用研究. 《计算机集成制造系统》.
1098. 黄肖玲，初延刚，李慧莹，柴天佑（2004）. 选矿制造执行系统的研究与应用. 《计算机集成制造系统》.
1099. Li-Jie Zhao, Tianyou Chai (2004). Adaptive moving window MPCA for online batch monitoring. Asian Control Conference.
1100. Jin-Xue Xu, Xiangdong Wang, Tianyou Chai, D. Tan (2004). The analysis of the convergence speed for an iterative learning scheme. ICARCV 2004 8th Control, Automation, Robotics and Vision Conference, 2004..DOI
1101. Xin Wang, Zhongjie Wang, Shaoyuan Li, Tianyou Chai (2004). Multiple models adaptive decoupling controller applied to the wind tunnel system. Fifth World Congress on Intelligent Control and Automation (IEEE Cat. No.04EX788).DOI
1102. Tianyou Chai, Wei Liu (2004). Production Cost Control Architecture for Iron & Steel Enterprise.
1103. Yong-Fu Wang, Xiaoling Huang, Li-Jie Zhao, Tianyou Chai (2004). Friction compensating modeling and control based on adaptive fuzzy system. ICARCV 2004 8th Control, Automation, Robotics and Vision Conference, 2004..DOI
1104. Yong-Fu Wang, Tianyou Chai (2004). Compensating modeling and control for friction using adaptive fuzzy system. IEEE Conference on Decision and Control.DOI
1105. Yong-Fu Wang, Xiaoling Huang, Li-Jie Zhao, Tianyou Chai (2004). Observer-based robust adaptive fuzzy tracking control in robot arms. ICARCV 2004 8th Control, Automation, Robotics and Vision Conference, 2004..DOI
1106. Zhongjie Wang, Qidi Wu, Tianyou Chai (2004). Optimal-setting control for complicated industrial processes and its application study.DOI
1107. Jin-Xue Xu, Lili Sun, Tianyou Chai, D. Tan (2004). High-order open and closed loop iterative learning control scheme with initial state learning. ICARCV 2004 8th Control, Automation, Robotics and Vision Conference, 2004..DOI
1108. Xiaoling Huang, Yong-Fu Wang, Li-Jie Zhao, Tianyou Chai (2004). Contemporary integrated manufacturing system based on ERP/MES/PCS in ore dressing. ICARCV 2004 8th Control, Automation, Robotics and Vision Conference, 2004..DOI
1109. Xiaoling Huang, Kunyuan Hu, Huiying Li, Tianyou Chai (2004). Mathematical programming model and algorithms for production planning with considering slab matching. International Conference on Machine Learning and Cybernetics.DOI
1110. Chai Tian-you (2004). Production Indices Forecasting Model Based on Fuzzy Cluster RBF Neural Network. Acta Simulata Systematica Sinica.
1111. Chai Tian-you (2004). Optimal control of rare earth countercurrent extraction process based on soft-sensor. Journal of Jilin University of Technology.
1112. Chai Tian-you (2004). Neural network cost prediction model based on real-coded genetic algorithm and its application. Control theory & applications.
1113. Chai Tian-you (2004). Research on Dynamic Cost Control System in Metallurgical Industry Production and Its Application. Information and Computation.
1114. Chai Tian-you (2004). Study of schedule system based on integrative four-dimension and application in ore-dressing process. Kongzhi yu juece.
1115. Chai Tian-you (2004). Dual-Mode Predictive Control Scheme for Nonlinear Discrete Systems Using Fuzzy System. Journal of Northeastern University.
1116. 赵立杰，柴天佑，王军延（2003）. 基于最小窗口MPCA的间歇过程实时监视和故障诊断软件. 《中南大学学报(自然科学版)》.
1117. 杨辉，谭明皓，柴天佑（2003）. 基于神经网络的多元稀土萃取组分含量的软测量. 《中国稀土学报》.
1118. 王冠，郑秀萍，张陶红，柴天佑（2003）. 氧化铝生产过程的MES体系结构. 《中南大学学报(自然科学版)》.
1119. 柴天佑（2003）. 流程工业信息化的发展状况及对策. 《机械设计与制造工程》.
1120. 柴天佑，丁进良，严爱军，赵大勇（2003）. 选矿生产过程综合自动化系统. 《首届全国有色金属自动化技术与应用学术年会论文集》.
1121. 杨辉，柴天佑（2003）. 串级萃取分离组分含量软测量及应用. 《首届全国有色金属自动化技术与应用学术年会》.
1122. 刘红波，李少远，柴天佑（2003）. 协调控制系统多变量PID控制器的自整定方法. 《自动化仪表》.
1123. 刘红波，李少远，柴天佑（2003）. 一种基于模糊切换的模糊复合控制器及其应用. 《控制与决策》.
1124. 王昕，岳恒，柴天佑（2003）. 一类非最小相位系统的多变量多模型解耦控制器. 《控制与决策》.
1125. 刘威，初延刚，柴天佑（2003）. 基于MES的动态成本控制系统设计及其应用. 《东北大学学报(自然科学版)》.
1126. 谢书明，陶钧，柴天佑（2003）. 基于神经网络的转炉炼钢终点控制. 《控制理论与应用》.
1127. 郑秀萍，王冠，柴天佑（2003）. 氧化铝生产过程综合自动化系统体系结构. 《东北大学学报(自然科学版)》.
1128. 柴天佑，李小平，周晓杰，初延刚，张杰卿（2003）. 基于三层结构的金矿企业现代集成制造系统. 《控制工程》.
1129. 陶文华，岳恒，柴天佑，李平（2003）. 钢球磨中储式制粉系统的建模与控制. 《控制工程》.
1130. 谢书明，陶钧，柴天佑（2003）. 转炉炼钢终点磷的智能预报. 《控制理论与应用》.
1131. Hongbo Liu, Shaoyuan Li, Tianyou Chai (2003). Intelligent decoupling control of power plant main steam pressure and power output.DOI
1132. Tianyou Chai (2003). Integrated Automation System for Minerals Processing 1.DOI
1133. Hongbo Liu, Shaoyuan Li, Tianyou Chai (2003). Control of power-plant main steam pressure and power output based on fuzzy reasoning and auto-tuning. The 12th IEEE International Conference on Fuzzy Systems, 2003. FUZZ '03..DOI
1134. Yong-Fu Wang, Tianyou Chai, S. Tong (2003). Adaptive observer for a class of nonlinear uncertain systems based on fuzzy basis functions. Proceedings of the 2003 International Conference on Machine Learning and Cybernetics (IEEE Cat. No.03EX693).DOI
1135. Chai Tian-you (2003). Study of integrated production control system in iron and steel enterprise. Kongzhi yu juece.
1136. 郭戈，王伟，柴天佑（2002）. 基于神经网络的铸坯凝固过程自适应控制. 《兰州理工大学学报》.
1137. 郭戈，王伟，柴天佑（2002）. 连铸过程自动化技术综述. 《冶金自动化》.
1138. 郭戈，王伟，柴天佑（2002）. 结晶器液位控制系统的设计与实现(英文). 《控制理论与应用》.
1139. 郭戈，王伟，柴天佑（2002）. 连铸过程中几个关键环节的设计与实现. 《自动化学报》.DOI
1140. 孟涛，岳恒，柴天佑（2002）. 大型火力发电厂监控系统的研发与应用. 《控制工程》.
1141. 柴天佑，金以慧，任德祥，邵惠鹤，钱积新，李平，桂卫华，郑秉霖（2002）. 基于三层结构的流程工业现代集成制造系统. 《控制工程》.
1142. 张承进，潘学军，柴天佑（2002）. 时变系统带δ-修正算法的直接自适应控制. 《山东电机工程学会第九届优秀学术论文集》.
1143. 郭戈，柴天佑（2002）. 一种悬臂板预测控制策略. 《中国电机工程学报》.
1144. 王昕，岳恒，柴天佑（2002）. 基于多模型切换的多变量直接自适应控制器. 《东北大学学报(自然科学版)》.
1145. Zheng-Jun Yu, Tianyou Chai, Xue-Bo Chen (2002). Intelligent control method and application of hot metal desulfuration processes.DOI
1146. Xiao-Nan Li, Tianyou Chai, Zhang-Xiong Yu, Hua-Fu Li (2002). DYNAMIC COST CONTROL METHOD IN PRODUCTION PROCESS AND ITS APPLICATION.DOI
1147. Tianyou Chai, Ming-Hao Tan, Xiao-Yang Chen, Han-Xiong Li (2002). INTELLIGENT OPTIMIZATION CONTROL FOR LAMINAR COOLING.DOI
1148. Tianyou Chai, Hui-Ying Li, Xiao-Jie Zhou, Xiao-Ping Li, Zhang-Xiong Yu, Xiao-Gang Wang (2002). THE STUDY AND APPLICATION OF GOLD MINE INTEGRATED AUTOMATION SYSTEM.DOI
1149. Xin Wang, Heng Yue, Tianyou Chai (2002). Multivariable direct adaptive pole placement feedforward decoupling controller using multiple models. Proceedings of the 4th World Congress on Intelligent Control and Automation (Cat. No.02EX527).DOI
1150. Xiangting Qin, K.Y. Zhu, Tianyou Chai (2002). Robust adaptive decoupling design for generalized predictive control with neural network. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
1151. Qionghai Dai, Zhaongtao, Tianyou Chai, Shao Cheng (2002). Robust direct adaptive control based on dynamic neural networks. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
1152. Z. Ma, Tianyou Chai (2002). An logical multivariable robust self-tuning decoupling direct algorithm. Proceedings of the IEEE Conference on Decision & Control, including the Symposium on Adaptive Processes.DOI
1153. Qingguo Li, Tong Shaocheng, Chai Tian-you (2002). H/sup ∞/ tracking of unknown nonlinear systems using neural network. IEEE International Symposium on Intelligent Control.DOI
1154. Tong Shaocheng, Qingguo Li, Chai Tian-you (2002). Fuzzy indirect adaptive control and robustness analysis for unknown multivariable nonlinear systems.DOI
1155. Chai Tian-you, Wang Xin, Yue Heng (2002). Multivariable intelligent decoupling control and its applications. World Congress on Intelligent Control and Automation.DOI
1156. Jun Tao, Wang Xin, Chai Tian-you, Shuming Xie (2002). INTELLIGENT CONTROL METHOD and APPLICATION for BOF STEELMAKING PROCESS. IFAC Proceedings Volumes.DOI
1157. Chai Tian-you, LI Hui-ying, Zhangxiong Yu, Li Huafu (2002). THE INTEGRATED AUTOMATION SYSTEM OF IRON & STEEL ENTERPRISE. IFAC Proceedings Volumes.DOI
1158. Tong Shaocheng, Qingguo Li, Chai Tianyou (2002). Direct adaptive fuzzy control for unknown multivariable nonlinear systems with fuzzy logic.DOI
1159. Liu Hongbo, Chai Tianyou, Fengchun Sun (2002). An artificial intelligence control policy and its application to the technological process of formaldehyde.DOI
1160. 张晶涛，钱晓龙，王伟，张莉，柴天佑（2001）. 步进式加热炉燃烧控制的新方法. 《控制与决策》.DOI
1161. 陶钧，柴天佑，李小平，郑万，刘万善，黎军保（2001）. 转炉炼钢智能控制方法及应用. 《控制理论与应用》.
1162. 余章雄，李慧莹，柴天佑，郑秀萍，李晓楠，李华甫（2001）. 邯钢计算机集成制造系统的设计与实施. 《控制理论与应用》.
1163. 郭戈，王伟，柴天佑（2001）. 连铸结晶器液位预测控制. 《控制理论与应用》.
1164. 关守平，柴天佑，高军（2001）. 中厚钢板加速冷却过程混合式优化控制模型的研究. 《控制理论与应用》.
1165. 谢书明，孙廷玉，柴天佑，陶钧（2001）. 转炉炼钢智能动态终点控制(英文). 《控制理论与应用》.
1166. 郭戈，王伟，柴天佑（2001）. 线性系统零极点及其分布. 《信息与控制》.
1167. 谢书明，柴天佑，陶钧（2001）. 一种转炉炼钢动态终点预报的新方法. 《自动化学报》.DOI
1168. 徐喆，胡琦泉，柴天佑，陈常嘉（2001）. 一种H∞推理控制器. 《自动化学报》.DOI
1169. 柴天佑（2001）. 基于ERP／MES／PCS三级结构的金矿企业现代化集成制造系统. 《第二十届中国控制会议论文集（上）》.
1170. 谭明皓，柴天佑，袁德成（2001）. 一类非线性系统的随机闭环自适应预测控制. 《第二十届中国控制会议论文集（上）》.
1171. 张振山，柴天佑，李小平，邓长辉，宋贤武（2001）. 棒材连轧机立式活套的多变量自适应解耦控制. 《自动化学报》.
1172. 王昕，岳恒，柴天佑，李小平（2001）. 基于多模型切换的多变量直接自适应极点配置控制器. 《控制理论与应用》.
1173. 宋崇辉，柴天佑（2001）. 一类模糊系统的分解性质和稳定性分析. 《控制理论与应用》.
1174. Shou-Ping Guan, Tianyou Chai, Jun Gao (2001). The Optimal Model of Hybrid Control for the Laminar Cooling Process of Hot Rolled Slab.
1175. Shu-Ming Xie, Tianyou Chai (2001). BOF Intelligent Dynamic Endpoint Control.
1176. Chai Tian-you (2001). A Hierarchical Modeling Method. Acta Simulata Systematica Sinica.
1177. 荣莉，柴天佑，钱晓龙（2000）. 加热炉过程控制技术的新策略——智能控制. 《控制与决策》.DOI
1178. 雷建和，张晶明，王广义，余章雄，柴天佑（2000）. VISUAL BASIC环境中PLC和上位机的通信实现. 《测控技术》.
1179. 刘红波，柴天佑，张晶涛，曹方，李健（2000）. 一种新的鲁棒串级控制系统及其应用. 《仪器仪表学报》.
1180. 徐喆，胡琦泉，柴天佑，陈常嘉（2000）. 新的鲁棒推理控制系统设计方法(英文). 《控制理论与应用》.
1181. 柴天佑，荣莉，马庆云（2000）. 智能控制技术在我国轧钢炉窑控制中的应用. 《冶金自动化》.
1182. 陶钧，谢书明，柴天佑（2000）. 基于遗传算法和径向基函数神经网络的转炉炼钢模型. 《系统仿真学报》.
1183. 柴天佑，王笑波（2000）. RBF神经网络在加速冷却控制系统中的应用. 《自动化学报》.
1184. 佟绍成，李庆国，柴天佑（2000）. 基于神经网络的一类非线性系统自适应输出跟踪. 《自动化学报》.
1185. 乔俊飞，王笑波，柴天佑（2000）. 带材板形的一种复合控制方法(英文). 《控制理论与应用》.
1186. 王伟，张晶涛，柴天佑（2000）. PID参数先进整定方法综述. 《自动化学报》.
1187. 柴天佑，王中杰，张莉（2000）. 加热炉的炉温优化设定模型. 《自动化学报》.
1188. 于政军，柴天佑，陈雪波（2000）. 智能控制技术在烧结球团焙烧过程优化控制中的应用. 《第十九届中国控制会议论文集（二）》.
1189. 荣莉，柴天佑，马庆云（2000）. 基于Elman型回归神经网络的空燃配比优化控制. 《信息与控制》.
1190. 郑秀萍，吴川，李慧莹，柴天佑（2000）. 火电厂经济运行计算机管理系统. 《控制工程》.
1191. 王仲初，柴天佑（2000）. 中厚板水幕分组冷却的最优前馈控制算法. 《控制工程》.
1192. 佟绍成，柴天佑（2000）. 一类多变量非线性动态系统的鲁棒自适应模糊控制. 《自动化学报》.DOI
1193. 柴天佑（2000）. 新世纪工业自动化展望. 《群言》.
1194. Rui-Jun Zhu, Qingwei Chen, Wei-Li Hu, Zhong Chen, Tianyou Chai (2000). Memoryless robust control of a class of nonlinear uncertain time-delay system in large-domain. Proceedings of the 3rd World Congress on Intelligent Control and Automation (Cat. No.00EX393).DOI
1195. Zhong-Chun Wang, Tianyou Chai (2000). The preset algorithm of the controlled cooling system with grouped water-curtain for plate. Proceedings of the 3rd World Congress on Intelligent Control and Automation (Cat. No.00EX393).DOI
1196. Junfei Qiao, Xiaobo Wang, Tianyou Chai (2000). A Compound Control Method for Strip Shape.
1197. 柴天佑，王伟，邵诚（1999）. 勇于探索建设一流学科. 《学位与研究生教育》, No. 6.下载原文
1198. 张振山，柴天佑，白彬彬，邓长辉，杨欣，张耀斌，宋贤武（1999）. 棒材连轧机立式活套的调试与控制. 《控制工程》.
1199. 刘向杰，周孝信，柴天佑（1999）. 模糊控制研究的现状与新发展. 《信息与控制》.
1200. 柴天佑，谢书明，杜斌，任德祥（1999）. 基于RBF神经网络的转炉炼钢终点预报. 《中国有色金属学报》.
1201. 李昇平，柴天佑（1999）. 一种自适应鲁棒控制方法及其闭环稳定性分析. 《自动化学报》.
1202. 徐喆，柴天佑（1999）. 一种多率自校正GLQG推理控制器. 《控制与决策》.
1203. 王中杰，柴天佑，邵诚（1999）. 加热炉多模式动态优化控制策略. 《控制与决策》.
1204. 范颖晖，陈善本，张福恩，柴天佑（1999）. 区域极点约束下的具L2有界不确定性系统鲁棒优化设计问题. 《信息与控制》.
1205. 高宪文，李树江，柴天佑（1999）. 超高功率直流电弧炉的建模与智能复合控制(英文). 《控制理论与应用》.
1206. 朱瑞军，柴天佑，伏静丹（1999）. 基于神经网络的不确定非线性系统的鲁棒控制. 《控制与决策》.
1207. 赵欣宇，柴天佑，赵振宁，赵新力（1999）. 火电厂经济运行系统开发与应用的研究. 《计算机集成制造系统》.
1208. 李昇平，谢媛芳，柴天佑（1999）. 递推l1鲁棒辨识方法研究. 《控制理论与应用》.
1209. 佟绍成，柴天佑，邵诚（1999）. 一类大系统的间接自适应分散模糊控制. 《自动化学报》.DOI
1210. Shu-Ming Xie, Tianyou Chai (1999). Prediction of BOF Endpoint Temperature and Carbon Content.DOI
1211. Shaocheng Tong, Qing-Guo Li, Tianyou Chai (1999). Fuzzy adaptive control for a class of nonlinear systems. Fuzzy Sets Syst..DOI
1212. Jingtao Zhang, Wei Wang, Tianyou Chai, Fang Cao (1999). Intelligent Fuzzy Control of the Power Plant Boiler Water Level 1.DOI
1213. Zhongjie Wang, C. Shao, Tianyou Chai (1999). Application of multivariable technique in temperature control of reheating furnaces. Proceedings of the 1999 IEEE International Conference on Control Applications (Cat. No.99CH36328).DOI
1214. Tianyou Chai, Heng Yue, Yan Bai (1999). Intelligent Control of Coal-Pulverizing Systems With Ball-Tube Mill.DOI
1215. Wei-Hua Wang, C. Soh, Tianyou Chai (1999). Robust tracking for MIMO nonlinear time-dependent mismatched uncertain systems: non-adaptive versus adaptive control.DOI
1216. J. Jiya, C. Shao, Tianyou Chai (1999). Neural network based adaptive predictive control algorithm of nonlinear non-minimum phase systems. Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).DOI
1217. Dai Qionghai, Wu Hongwei, Sun Fuxin, Li Yanda, Wen Wang, Tianyou Chai (1999). Robust adaptive tracking for nonlinear systems using dynamic neural networks.DOI
1218. J. Jiya, C. Shao, Tianyou Chai (1999). Design of an adaptive control of bilinear system with guaranteed stability. International Journal of Systems Science.DOI
1219. Shaocheng Tong, Tianyou Chai (1999). Properties of multivariable fuzzy controller under Gödel's implication. Fuzzy Sets Syst..DOI
1220. J. Jiya, C. Shao, Tianyou Chai (1999). Comparison of PID and PPI Design Techniques for a Process with Time Delay.DOI
1221. Zhongjie Wang, Tianyou Chai, Shou-Ping Guan, C. Shao (1999). Hybrid optimization setpoint strategy for slab reheating furnace temperature. Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251).DOI
1222. Shengping Li, Tianyou Chai (1999). On continuity property of ℓ 1 optimization design in general case.DOI
1223. K. Zhu, X. Qin, Tianyou Chai (1999). A new decoupling design of self‐tuning multivariable generalized predictive control.DOI
1224. Tianyou Chai, Shaocheng Tong (1999). Fuzzy direct adaptive control for a class of nonlinear systems. Fuzzy Sets Syst..DOI
1225. Shaocheng Tong, Tianyou Chai (1999). Direct adaptive control and robust analysis for unknown multivariable nonlinear systems with fuzzy logic systems. Fuzzy Sets Syst..DOI
1226. Junfei Qiao, Xiaobo Wang, Ge Guo, Tianyou Chai (1999). A Feedforward-cascade Strip Shape Control Method.DOI
1227. Tianyou Chai, Xinyu Zhao, Xinli Zhao (1999). A 2-dimensional architecture for process industry. IFAC Proceedings Volumes.DOI
1228. 张承进，潘学军，柴天佑（1998）. 一类线性时变系统的间接自适应控制. 《控制与决策》.DOI
1229. 张承进，潘学军，柴天佑（1998）. 时变系统带δ-修正算法的直接自适应控制. 《控制与决策》.DOI
1230. 李平，柴天佑（1998）. ι1优化设计的连续性分析（英文）. 《控制理论与应用》.
1231. 潘学军，柴天佑（1998）. 二机架冷连轧机厚度的模糊控制. 《自动化与仪器仪表》.
1232. 寇新民，罗公亮，柴天佑（1998）. 动态过程辨识的一种BP鲁棒算法. 《控制理论与应用》.
1233. 郭戈，王伟，柴天佑（1998）. 一种鲁棒预测控制方法及其在连铸中的应用. 《钢铁研究学报》.
1234. 谢书明，王仲初，柴天佑（1998）. 模糊控制在转炉炼钢中的应用. 《1998年中国控制会议》.
1235. 刘向杰，夏靖波，柴天佑（1998）. 一类基于正态分布隶属函数的模糊控制策略研究. 《控制与决策》.
1236. 李树江，高宪文，柴天佑（1998）. 智能控制及其在电弧炉除尘系统中的应用. 《控制与决策》.
1237. 朱瑞军，柴天佑，伏静丹，胡维礼（1998）. 基于动态神经网络的非线性系统鲁棒观测器设计. 《信息与控制》.
1238. 张承进，潘学军，柴天佑（1998）. 一种新的时变系统极点配置自适应控制方法. 《控制理论与应用》.
1239. 牛培峰，孙健，柴天佑（1998）. 采用国产75t/h循环流化床锅炉的单元机组汽压自适应控制系统. 《控制理论与应用》.
1240. 李庆国，冯玉珠，佟绍成，柴天佑（1998）. 基于神经网络的非线性系统故障检测及容错控制方法. 《信息与控制》.
1241. 郭戈，乔俊飞，王伟，柴天佑（1998）. 基于模糊神经网络的一种漏钢预报方法. 《控制理论与应用》.
1242. 岳恒，柴天佑，邵诚（1998）. 一类非最小相位非线性系统的神经网络自适应控制策略. 《信息与控制》.
1243. 谢书明，柴天佑（1998）. 一种参数自适应模糊PID控制器. 《信息与控制》.
1244. 周永，戴琼海，柴天佑，虞和济（1998）. 基于动态神经网的鲁棒直接自适应控制. 《信息与控制》.
1245. 赵欣宇，柴天佑，赵新力（1998）. CIMS与CIPS体系结构对比分析的研究. 《信息与控制》.
1246. 郭戈，乔俊飞，王伟，柴天佑（1998）. 基于模糊模式识别的漏钢预报. 《信息与控制》.
1247. 柴天佑，王伟（1998）. 推理控制综述. 《信息与控制》.
1248. 高宪文，柴天佑，顾冬雷，成洪飞（1998）. 超高功率直流电弧炉炼钢过程控制级的仿真研究. 《信息与控制》.
1249. 刘向杰，柴天佑（1998）. 锅炉汽包水位系统的仿人智能控制策略. 《信息与控制》.
1250. 李树江，高宪文，柴天佑（1998）. 模糊串级控制及其在精炼炉吹氩系统中应用. 《信息与控制》.
1251. 李界家，柴天佑（1998）. 辨识及故障检测技术在铝电解生产过程中的应用. 《自动化学报》.
1252. 王中杰，余章雄，柴天佑（1998）. 智能控制综述. 《控制工程》.
1253. 朱瑞军，柴天佑（1998）. 一类不确定非线性系统鲁棒自适应观测器设计的新方法. 《自动化学报》.DOI
1254. 刘向杰，柴天佑，刘红波（1998）. 动力锅炉燃烧系统的模糊控制策略. 《自动化学报》.
1255. 刘向杰，柴天佑，张焕水（1998）. 三维模糊控制器的结构研究. 《自动化学报》.DOI
1256. 佟绍成，徐为民，柴天佑（1998）. 关于多变量非线性系统的自适应模糊控制. 《自动化学报》.
1257. 乔俊飞，郭戈，柴天佑，王伟（1998）. 神经网络在板形检测中的应用. 《中国有色金属学报》.
1258. 张国山，柴天佑，顾兴源（1998）. 使用多控制器结构的可靠镇定. 《自动化学报》.DOI
1259. 乔俊飞，郭戈，柴天佑（1998）. 带材板形自适应控制. 《东北大学学报(自然科学版)》.
1260. Heng Yue, Tianyou Chai (1998). Adaptive decoupling control of multivariable nonlinear non-minimum phase systems using neural networks. Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).DOI
1261. Guoshan Zhang, Shi-Lian Yu, Tianyou Chai (1998). Reduced-Order Observer's Design and Parameterization for Singular Systems.DOI
1262. Tianyou Chai, Sbouping Guan (1998). Object-Oriented Integrated Control Technology of Complex Industrial Processes.DOI
1263. J. Jiya, C. Shao, Tianyou Chai (1998). Design of an Adaptive Bilinear Control Algorithm for a Class of Combustion Process.DOI
1264. Junfei Qiao, Ge Guo, Tianyou Chai, C. Shao (1998). A new method of flatness control in cold rolling process. Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).DOI
1265. Shaocheng Tong, Tianyou Chai (1998). Fuzzy indirect adaptive control for a class of decentralized nonlinear systems. International Journal of Systems Science.DOI
1266. Kou Xinmin, Chai Tian-you (1998). A Robust Back Propagation Algorithm for Identification of Dynamical Systems. Control theory & applications.
1267. Huan-Shui Zhang, Tianyou Chai, Xiangjie Liu (1998). A Unified Approach to Optimal State Estimation for Stochastic Singular Systems. at - Automatisierungstechnik.DOI
1268. Shou-Ping Guan, Xiaobo Wang, Tianyou Chai (1998). An expert controller for the laminar cooling process of hot rolled slab. Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).DOI
1269. Chengjin Zhang, Tianyou Chai (1998). A new robust adaptive control algorithm for linear time-varying plants. International Journal of Systems Science.DOI
1270. W. H. Wang, CHEONG BOON SOH, Tianyou Chai (1998). Robust Output Tracking for MIMO Nonlinear Time-Varying Mismatched Uncertain Systems Via Hybrid Control Strategy. Dynamics and Control.DOI
1271. C.-J. Zhang, Cheng Shao, Tianyou Chai (1998). Indirect adaptive control for a classof linear time-varying plants. IEE Proceedings - Control Theory and Applications.DOI
1272. Peifeng Niu, Chai Tian-you (1998). The Steam Pressure Self-Adaptive Control System of a Monoblock with Home-Made 75t/h CFBB. Control theory & applications.
1273. 潘学军，柴天佑（1997）. 模糊控制在冷轧厚度控制中的应用. 《1997中国控制与决策学术年会论文集》.
1274. 白焰，柴天佑（1997）. 一种新的二阶神经元网络模型及其学习算法. 《1997中国控制与决策学术年会论文集》.
1275. 寇新民，柴天佑（1997）. 连续铸造中一种漏钢预报的神经元网络方法. 《1997中国控制与决策学术年会论文集》.
1276. 张承进，柴天佑（1997）. 一类连续时变系统的间接鲁棒自适应控制. 《1997年中国控制会议》.
1277. 石鸿雁，柴天佑（1997）. 目标规划在钢铁企业生产计划辅助决策模型中的应用. 《1997中国控制与决策学术年会论文集》.
1278. 余文，Ｍ．ＤｅｌａＳｅｎ，柴天佑（1997）. 具有任意非线性输入的鲁棒模型参考自适应控制. 《自动化学报》.
1279. 张焕水，柴天佑（1997）. 广义离散随机线性系统最优递推预报方法及其渐近稳定性. 《自动化学报》.
1280. 李树江，高宪文，柴天佑（1997）. 神经网络在钢包精炼炉配料中应用. 《1997年中国控制会议论文集》.
1281. 柴天佑，张贵军（1997）. 基于给定的相角裕度和幅值裕度的PID参数自整定新方法. 《自动化学报》.
1282. 马孜，范俭，柴天佑（1997）. 具有超稳定结构的鲁棒自适应控制器. 《自动化学报》.
1283. 王伟，郭戈，柴天佑，寇新民（1997）. 连铸过程的建模与控制. 《控制与决策》.DOI
1284. 张焕水，柴天佑（1997）. 广义离散随机线性系统最优滤波·预报和平滑估计的统一格式. 《控制理论与应用》.
1285. 张国山，柴天佑，顾兴源（1997）. 一般动态系统降阶观测器的设计及参数化表示. 《控制理论与应用》.
1286. 佟绍成，柴天佑（1997）. 一类非线性系统的自适应模型控制. 《控制与决策》.
1287. 吴黎明，柴天佑（1997）. 一类非线性离散时间系统的神经网络解耦策略. 《自动化学报》.DOI
1288. 康子博，柴天佑，尹英杰，藤井省三（1997）. SCARA型机械手的鲁棒防振控制. 《控制与决策》.
1289. 郭戈，王伟，柴天佑（1997）. 一种模糊方法在结晶器液位控制中的应用. 《1997中国控制与决策学术年会》.
1290. 徐为民，邵诚，柴天佑（1997）. 一种工业机器手的自适应阻抗控制方法. 《控制与决策》.
1291. 张贵军，柴天佑，余文（1997）. 一种多变量自校正前馈解耦PID控制器及其应用. 《控制与决策》.
1292. 张焕水，柴天佑，何乐亮（1997）. 离散随机线性系统最优滤波、预报和平滑估计的一种统一方法. 《控制与决策》.
1293. 关守平，柴天佑，王笑波（1997）. 实时专家系统中的时限推理问题. 《信息与控制》.
1294. 王殿辉，柴天佑（1997）. 基于ANN模型的非线性自校正预测控制器. 《自动化学报》.DOI
1295. 牛培峰，孙键，柴天佑（1997）. 国产 75t/h 循环流化床锅炉燃烧智能控制系统. 《发电设备》.
1296. 寇新民，柴天佑（1997）. 一种大样本的鲁棒光滑前向网络训练算法. 《信息与控制》.
1297. 佟绍成，柴天佑（1997）. 一种非线性系统的模糊自适应控制. 《信息与控制》.
1298. 佟绍成，柴天佑（1997）. 一类大系统的直接自适应分散模糊控制. 《控制与决策》.
1299. 张承进，柴天佑（1997）. 一种新的线性时变系统鲁棒自适应控制算法. 《控制与决策》.
1300. 徐为民，柴天佑，阎宝岑（1997）. 一种基于操作空间的操作器分散自适应控制方法. 《机器人》.
1301. Xiangjie Liu, Tianyou Chai (1997). A weighted algorithm of fuzzy logic strategy on water level control of steam generator. Proceedings of the 36th IEEE Conference on Decision and Control.DOI
1302. Xiangjie Liu, Huan-Shui Zhang, Tianyou Chai (1997). Structure analysis of three-dimensional fuzzy controller and its relationship to PID controller. Proceedings of the 36th IEEE Conference on Decision and Control.DOI
1303. Shou-Ping Guan, Xiaobo Wang, Tianyou Chai, Xiao-Gang Wang (1997). The Slab Accelerating Cooling System Control Model and Its Application Study.DOI
1304. Qing-Guo Li, Shaocheng Tong, Tianyou Chai (1997). Adaptive control of nonlinear uncertain systems using neural network. European Control Conference.DOI
1305. Cheng-Jin Zhang, Tianyou Chai (1997). A new pole-placement adaptive control scheme for time-varying plants. Proceedings of the 36th IEEE Conference on Decision and Control.DOI
1306. Xiangjie Liu, Tianyou Chai (1997). A class of neural-fuzzy controller and its application in AC speed adjustment with varying frequency. Proceedings of the 36th IEEE Conference on Decision and Control.DOI
1307. Huan-Shui Zhang, Xiangjie Liu, Tianyou Chai (1997). A new method for optimal deconvolution. IEEE Transactions on Signal Processing.DOI
1308. Wei-Min Xu, Tianyou Chai (1997). Learning force/motion control for constrained robot manipulators. European Control Conference.DOI
1309. Heng Yue, Tianyou Chai, C. Shao (1997). Adaptive control of nonlinear non-minimum phase systems using neural networks. Proceedings of the 36th IEEE Conference on Decision and Control.DOI
1310. Ge Guo, Junfei Qiao, Wei Wang, Tianyou Chai (1997). A Fuzzy Leakage Alarm Method of Liquid Steel.DOI
1311. Wei-Min Xu, C. Shao, Tianyou Chai (1997). Learning control for a class of constrained mechanical systems with uncertain disturbances. Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).DOI
1312. Shujiang Li, Xianwen Gao, Tianyou Chai, Xiao-Gang Wang (1997). Neural Network Techniques and Its Applications in Ladle Furnace Burden.DOI
1313. Shujiang Li, Xianwen Gao, Tianyou Chai (1997). Fuzzy neural network compound control and its applications for dust trap of electric arc furnace. IEEE International Conference on Intelligent Processing Systems.DOI
1314. Z. Kang, Yingjie Yin, S. Fujii, Tianyou Chai (1997). Gain-scheduling H/sub /spl infin// vibration control for SCARA type robot manipulators via LMIs. Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).DOI
1315. Yingxu Yang, Tianyou Chai (1997). Soft sensing based on artificial neural network. Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).DOI
1316. Rui-Jun Zhu, Tianyou Chai, C. Shao (1997). Robust nonlinear adaptive observer design using dynamic recurrent neural networks. Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).DOI
1317. Xiangjie Liu, Tianyou Chai (1997). Fuzzy logic strategy on boiler control problem. Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).DOI
1318. Shaocheng Tong, Tianyou Chai, Qing-Guo Li (1997). Fuzzy Direct Adaptive Control for a Class of Decentralized Nonlinear Systems. Cybernetics and systems.DOI
1319. Wei-Min Xu, Tianyou Chai, C. Shao (1997). Force and contact transient control for robot manipulators with robustness enhancement. Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).DOI
1320. Shaocheng Tong, Tianyou Chai, Hua-Guang Zhang (1997). Notes on multivariable fuzzy controller under Gödel's implication. Fuzzy Sets Syst..DOI
1321. Xianwen Gao, Shujiang Li, Tianyou Chai (1997). Implicit PID self-tuning controller and its applications. IEEE International Conference on Intelligent Processing Systems.DOI
1322. Z. Kang, Tianyou Chai, K. Oshima, J.-M. Yang, S. Fujii (1997). ROBUST VIBRATION CONTROL FOR SCARA-TYPE ROBOT MANIPULATORS.DOI
1323. Gui-Jun Zhang, Tianyou Chai, C. Shao (1997). A synthetic approach for control of intermittent wind tunnel. Proceedings of the 1997 American Control Conference (Cat. No.97CH36041).DOI
1324. Xu Pan, Tianyou Chai (1997). Application of Fuzzy Logic on Flatness Control of Cold Rolling Mill.DOI
1325. Xianwen Gao, Shujiang Li, Tianyou Chai, Xiao-Gang Wang (1997). Intelligent Compound Control of Direct Current Electric Arc Furnace.DOI
1326. Wei-Hua Wang, C. Soh, Tianyou Chai (1997). Robust stabilization of mimo nonlinear time-varying mismatched uncertain systems. at - Automatisierungstechnik.DOI
1327. K.Y. Zhu, Xiangting Qin, Tianyou Chai (1997). A new robust non-linear self-tuning predictive control using neural networks. Proceedings of the Institution of Mechanical Engineers Part I Journal of Systems and Control Engineering.DOI
1328. Qingguo Li, Tong Shaocheng, Chai Tianyou (1997). Robust control of nonlinear uncertain systems under generalized matching conditions using neuro-compensator. Proceedings of the ... American Control Conference/Proceedings of the American Control Conference.DOI
1329. 张承进，柴天佑（1996）. 非最小相位开环不稳定时变系统的稳定自适应控制. 《1996中国控制与决策学术年会》.
1330. 戴琼海，柴天佑，张涛，朱瑞军，邵诚（1996）. 一类未知多变量非线性系统的动态神经网络自适应控制. 《信息与控制》.
1331. 张贵军，柴天佑（1996）. 一种设计智能控制器切换阈值和控制律的相平面法. 《1996年中国控制会议论文集》.
1332. 李树江，刘向杰，柴天佑（1996）. 模糊控制在三相异步电动机轻载降压节能中的应用. 《信息与控制》.
1333. 王一平，戴琼海，柴天佑（1996）. 动态神经元网络的直接自适应控制与应用. 《辽宁工程技术大学学报(自然科学版)》.
1334. Wen-Shyong Yu, Tianyou Chai, Yi Yuan (1996). Centrifuges Rotor Adaptive Control Using Support Stiffness Change and Decreased Vibration Force Technique.DOI
1335. Huan-Shui Zhang, Tianyou Chai, Xiangjie Liu (1996). A Unified Approach to Optimal Estimation for Stochastic Singular System.DOI
1336. Gui-Jun Zhang, C. Shao, Tianyou Chai (1996). A new method for independently tuning PID parameters. Proceedings of 35th IEEE Conference on Decision and Control.DOI
1337. Wen-Shyong Yu, Tianyou Chai, Yi Yuan (1996). Decreased vibration control for centrifuges: A new adaptive hybrid control technique.DOI
1338. Wei-Min Xu, C. Shao, Tianyou Chai (1996). An adaptive impedance controller for robot manipulators in task space. Proceedings of 35th IEEE Conference on Decision and Control.DOI
1339. Shujiang Li, Xianwen Gao, Tianyou Chai (1996). The application of compound fuzzy control in the power-saving of motor. Proceedings of 35th IEEE Conference on Decision and Control.DOI
1340. Kezhi Mao, Tianyou Chai (1996). Model predictive control algorithmsfor systems with slowsampled outputs. IEE Proceedings - Control Theory and Applications.DOI
1341. 张向彤，曾培祥，柴天佑（1995）. 模糊控制在水幕冷却供水控制系统中的应用. 《1995年中国控制会议》.
1342. 关守平，柴天佑（1995）. 数字网络模式匹配推理算法. 《计算机科学》.
1343. 张化光，杨英旭，柴天佑（1995）. 多变量模糊控制的展望. 《1995中国控制与决策学术年会》.
1344. Dian-Hui Wang, Tianyou Chai (1995). A self-tuning fuzzy controller via fuzzy inference network. Proceedings of 1995 IEEE International Conference on Fuzzy Systems..DOI
1345. Shoulie Xie, Tianyou Chai (1995). A modified discrete time model reference adaptive control scheme for transient performance improvement. Proceedings of 1995 34th IEEE Conference on Decision and Control.DOI
1346. Tao Zhang, Tianyou Chai, Yuan Li (1995). A Current Intelligent Controller and its Application in Industrial Control.DOI
1347. Shou-Ping Guan, Tianyou Chai (1995). A Kind of Fast Uncertain Reasoning Algorithm in the Digital Network for Real-Time Expert System.DOI
1348. Z.-H. Li, C. Wen, C. Soh, Tianyou Chai (1995). Robustness of Krstić's New Adaptive Control Scheme.DOI
1349. Dian-Hui Wang, Tianyou Chai (1995). Neural-net based multi-steps nonlinear adaptive model predictive controller design. American Control Conference.DOI
1350. Tianyou Chai, Wei-Hua Wang (1995). Robust Output Tracking for Mismatched Uncertain Systems – A Hybrid Approach.DOI
1351. Dian-Hui Wang, Tianyou Chai, L. Xia (1995). Adaptive fuzzy neural controller design. American Control Conference.DOI
1352. Li-Min Wu, Tianyou Chai (1995). Decoupling of a class of nonlinear discrete time systems using neural networks. American Control Conference.DOI
1353. Wen-Shyong Yu, Tianyou Chai (1995). Robustness and transient performance of adaptive decoupler for a class of multivariable systems.DOI
1354. Zhonghua Li, Tianyou Chai, Cheong-Boon Soh, Changyun Wen (1995). Adaptive robust control of nonlinear uncertain systems. International Journal of Systems Science.DOI
1355. 余文，柴天佑（1994）. 多变量前馈自校正PID控制器. 《1994中国控制与决策学术年会》.
1356. 关守平，柴天佑（1994）. 应用智能技术的电厂计算机集散控制系统. 《控制工程》.
1357. 王殿辉，柴天佑（1994）. 非线性系统自适应控制的Fuzzy神经网络方法. 《1994年中国控制会议论文集》.
1358. 王殿辉，柴天佑，张化光（1994）. 多变量模糊推理系统的神经网络实现. 《1994中国控制与决策学术年会论文集》.
1359. 马孜，刘星浦，柴天佑，唐海燕（1994）. 逻辑型鲁棒自校正前馈控制直接算法. 《1994中国控制与决策学术年会论文集》.
1360. 张国山，柴天佑，顾兴源（1994）. 分散控制系统的可靠镇定. 《1994中国控制与决策学术年会论文集》.
1361. Dian-Hui Wang, Tianyou Chai (1994). Multivariable adaptive control of unknown nonlinear dynamic systems using neural networks. Proceedings of 1994 33rd IEEE Conference on Decision and Control.DOI
1362. Li-Min Wu, Tianyou Chai (1994). A Training Strategy for Adaptive Optimal Neural Controllers.DOI
1363. Wen-Shyong Yu, Tianyou Chai, Xing-Yuan Gu (1994). Self-tuning feedforward PID controller. Proceedings of 1994 33rd IEEE Conference on Decision and Control.DOI
1364. Tianyou Chai, Tao Zhang (1994). A new model reference robust adaptive controller in the presence of unmodeled dynamics and bounded disturbances. Automatica.DOI
1365. 柴天佑，张奎刚（1993）. 具有降阶模型的多变量鲁棒自适应前馈控制器. 《控制理论与应用》.
1366. 马孜，柴天佑（1993）. 多变量鲁棒自校正解耦间接算法. 《信息与控制》.
1367. 毛可智，柴天佑（1993）. 一种能有效克服不可测干扰的自适应推理控制策略. 《信息与控制》.
1368. 马孜，柴天佑，金丰（1993）. 具有加权项在线选择的广义自校正前馈控制器. 《控制与决策》.
1369. 苏克，王洁，柴天佑（1993）. 一种隐式极点配置自校正控制器及其应用. 《1993中国控制与决策学术年会论文集》.
1370. 王殿辉，张化光，柴天佑（1993）. 多变量Fuzzy自适应控制——算法结构的研究. 《1993中国控制与决策学术年会论文集》.
1371. 马孜，柴天佑（1993）. 多变量鲁棒自校正解耦直接算法. 《控制与决策》.
1372. 张化光，柴天佑，陈来九，吕剑虹（1993）. 多变量模糊自校正控制器及其应用. 《控制理论与应用》.
1373. 柴天佑（1993）. 隐式多变量广义自校正控制器. 《自动化学报》.
1374. Zhong-Hua Li, Tianyou Chai (1993). Adaptive robust tracking for nonlinear uncertain systems. Proceedings of 32nd IEEE Conference on Decision and Control.DOI
1375. Tianyou Chai, Xin-Zheng Li (1993). Global Convergent Inferential Self-Tuning Control Algorithm.DOI
1376. Chai Tian-you (1993). MULTIVARIABLE ROBUST SELF-TUNING DECOUPLING INDIRECT ALGORITHM. Information and Computation.
1377. 柴天佑（1992）. 一种直接多变量自适应解耦控制算法. 《信息与控制》.
1378. 柴天佑，王纲（1992）. 精馏塔的自适应解耦控制. 《控制理论与应用》.
1379. 柴天佑，郑立新（1992）. 多变量极点配置自适应动态解耦控制器. 《信息与控制》.
1380. 杨晓峰，柴天佑，张涛（1992）. 一种神经网络自适应控制方法. 《1992年控制理论及其应用年会论文集（上）》.
1381. 柴天佑（1991）. 第29届IEEE决策与控制会议简况. 《控制与决策》.
1382. 柴天佑（1991）. 多变量间接自适应控制算法及全局收敛性分析. 《东北大学学报(自然科学版)》.
1383. 何顺军，柴天佑（1991）. 一种具有整体性的随机多变量自适应控制器. 《1991年控制理论及其应用年会论文集（下）》.
1384. 柴天佑（1991）. 多变量间接自适应解耦控制算法. 《自动化学报》.
1385. 柴天佑（1991）. 具有在线选择加权项的隐式自校正控制器. 《控制理论与应用》.
1386. 柴天佑（1991）. 具有强相容参数估计的多变量自校正前馈控制器. 《自动化学报》.DOI
1387. 柴天佑，何向红（1990）. 一种新的随机多变量自适应极点配置控制器. 《信息与控制》.
1388. 柴天佑（1990）. 基于CARIMA模型的全局收敛的多变量随机自适应控制算法(英文). 《控制理论与应用》.
1389. 柴天佑，马孜（1990）. 广义自校正控制器及其在飞行高度控制中的应用. 《信息与控制》.
1390. 柴天佑（1990）. 一种新的间接自适应前馈控制算法及其应用. 《自动化学报》.DOI
1391. Tianyou Chai, Zi Ma (1990). A Multivariable Self-tuning Decoupling Controller with Consistent Parameter Estimates.DOI
1392. 柴天佑（1989）. 具有一般交互矩阵的多变量系统的随机直接自适应控制. 《自动化学报》.DOI
1393. 柴天佑（1989）. 多变量自校正解耦控制器的全局收敛性分析. 《自动化学报》.
1394. 柴天佑（1989）. 一种多变量隐式极点配置自校正控制器及其应用. 《自动化学报》.
1395. 柴天佑（1989）. 自适应控制算法统一格式的稳定性和收敛性. 《控制与决策》.
1396. 柴天佑（1989）. 一类全局收敛的多变量自校正控制器. 《控制理论与应用》.
1397. 柴天佑（1988）. 一种新的自校正前馈控制器. 《控制理论与应用》.
1398. 柴天佑（1988）. 自校正控制非最小相位的电加热系统. 《信息与控制》.
1399. Tianyou Chai (1988). A self-tuning decoupling controller for a class of multivariable systems and global convergence analysis.DOI
1400. 柴天佑，郎世俊（1987）. 一种简单的多变量自校正控制器及其在电加热炉上的应用. 《控制理论与应用》.
1401. 柴天佑（1987）. 自适应控制算法的统一格式. 《控制与决策》.
1402. 柴天佑（1987）. 第一届国际工业应用数学会议和第十六届IASTED辨识、建模和仿真国际学术会议简介. 《控制与决策》.DOI
1403. 柴天佑（1986）. 国际自控联第七届数字计算机在过程控制中应用学术会议介绍. 《控制与决策》.
1404. 柴天佑，郎世俊（1986）. 解谐最小方差自校正前馈控制器及其应用. 《控制与决策》.DOI
1405. 柴天佑，郎世俊，顾兴源（1986）. 多变量自校正前馈控制器及其应用. 《自动化学报》.DOI
1406. 柴天佑，郎世俊（1986）. 一种新的多变量自校正控制算法及其应用. 《信息与控制》.
1407. 柴天佑（1986）. 第五届全美控制会议观感. 《控制与决策》.
1408. Shi-Jun Lang, Xing-Yuan Gu, Tianyou Chai (1985). A SELF-TUNING FEEDFORWARD CONTROLLER FOR MIMO DISCRETE TIME SYSTEMS.DOI