顾伯勤

期刊论文

1. 宇晓明，沈超，马志刚，张斌，邵春雷，顾澄，聂佳伟，顾伯勤（2024）. 基于密封特性的弹簧金属C形环结构参数优化. 《润滑与密封》.
2. 张鹏高，顾伯勤，周剑锋，魏龙，冯秀（2022）. 磁流体润滑螺旋槽机械密封环角变形计算. 《南京工业大学学报(自然科学版)》.
3. 沈超，张斌，邵春雷，顾伯勤，宇晓明，邓文飞（2022）. 双波纹自密封复合垫片结构优化及密封特性研究. 《压力容器》.
4. 宇晓明，张斌，顾伯勤（2021）. 短纤维增强橡胶密封复合材料界面疲劳损伤行为. 《高分子材料科学与工程》.DOI
5. 李坤，顾伯勤，王成（2021）. 基于分子动力学的密封材料界面结合能研究. 《合成橡胶工业》.DOI
6. 姚炳洋，张斌，周剑锋，冯修成，邵春雷，顾伯勤（2021）. 非石棉密封垫片泄漏率预测及缺陷分析. 《石油化工设备》.
7. Kun Li, Haojie Sha, Boqin Gu (2021). Investigation of the diffusion and permeation of several media molecules in nano‐sealing composites using molecular dynamics simulation. Micro & Nano Letters.DOI
8. Xiaoming Yu, Bin Zhang, Boqin Gu (2021). Creep and Stress Relaxation Performance of Rubber Matrix Sealing Composites after Fatigue Loading. Fibers and Polymers.DOI
9. Xiaoming Yu, Bin Zhang, Boqin Gu (2021). Fatigue Behavior of Aramid Fiber Reinforced Rubber Matrix Sealing Composites. Fibers and Polymers.DOI
10. Xiaoming Yu, Bin Zhang, Boqin Gu (2020). Interfacial fatigue damage behavior of fiber reinforced rubber—A combined experimental and cohesive zone model approach. Polymer Engineering and Science.DOI
11. 孔慈宇，陈春辉，张斌，焦洪宇，陶晓辉，顾伯勤（2019）. 管法兰用柔性石墨金属齿形垫泄漏率及其预测模型. 《压力容器》.
12. 陶家辉，顾伯勤，陈立立，周剑锋（2019）. TA2拉压力学性能不对称性及应变速率敏感性. 《稀有金属材料与工程》.
13. Kun Li, Boqin Gu (2019). Molecular dynamic simulations investigating the wetting and interfacial properties of acrylonitrile nanodroplets in contact with variously functionalized graphene sheets. Chemical Physics Letters.DOI
14. Lili Chen, Boqin Gu, Jianfeng Zhou, Jiahui Tao (2019). Study of the Effectiveness of the RVEs for Random Short Fiber Reinforced Elastomer Composites. Fibers and Polymers.DOI
15. Penggao Zhang, Boqin Gu, Jianfeng Zhou, Wei Long (2019). Coupled heat transfer characteristics in a spiral groove mechanical seal lubricated by magnetic fluid. Industrial Lubrication and Tribology.DOI
16. Lili Chen, Boqin Gu, Jianfeng Zhou (2019). Development of the RSA method for random short fiber reinforced elastomer composites with large fiber aspect ratios. Materials Research Express.DOI
17. Lili Chen, Boqin Gu, Jiahui Tao, Jianfeng Zhou (2019). The average response and isotropy of 3D representative volume elements for random distributed short fibers reinforced elastomer. Composite Structures.DOI
18. 张梦园，顾伯勤，陶家辉（2018）. 工业纯钛TA2的室温压缩蠕变预测模型. 《机械工程材料》.
19. 张梦园，顾伯勤，陶家辉（2018）. 密封材料工业纯钛TA2中低温压缩蠕变行为. 《南京工业大学学报(自然科学版)》.
20. Xiu Feng, Boqin Gu, Penggao Zhang (2018). Prediction of Leakage Rates Through Sealing Connections with Metallic Gaskets. IOP Conference Series Earth and Environmental Science.DOI
21. Penggao Zhang, Boqin Gu, Jianfeng Zhou, Long Wei (2018). On hydrodynamic lubrication characteristics of ferrofluid film in a spiral groove mechanical seal. Industrial Lubrication and Tribology.DOI
22. 李坤，顾伯勤，朱万富（2017）. 多壁碳纳米管/丁腈橡胶密封复合材料的力学行为及其界面性能研究. 《化工新型材料》.
23. Bin Zhang, Xiaoming Yu, Boqin Gu (2017). A generalized self-consistent model for interfacial debonding behavior of fiber reinforced rubber matrix sealing composites. Journal of Shanghai Jiaotong University (Science).DOI
24. Wenjie Cheng, Boqin Gu, Chunlei Shao, Yi Wang (2017). Hydraulic characteristics of molten salt pump transporting solid-liquid two-phase medium. Nuclear Engineering and Design.DOI
25. Wenjie Cheng, Boqin Gu, Chunlei Shao (2017). A numerical study on the steady flow in molten salt pump under various conditions for improved hydraulic performance. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
26. Kun Li, Boqin Gu (2017). Molecular dynamics investigation of the physisorption and interfacial characteristics of NBR chains on carbon nanotubes with different characteristics. AIP Advances.DOI
27. Bin Zhang, Xiaoming Yu, Boqin Gu (2017). Modeling and experimental validation of interfacial fatigue damage in fiber‐reinforced rubber composites. Polymer Engineering and Science.DOI
28. Kun Li, Boqin Gu (2017). Influence of different functionalization on mechanical and interface behavior of MWCNTs/NBR sealing composites. Materials Research Express.DOI
29. Bin Zhang, Xiaoming Yu, Boqin Gu (2017). An improved shear lag model for predicting stress distribution in hybrid fiber reinforced rubber composites. Fibers and Polymers.DOI
30. Kun Li, GU Bo-qin, Wanfu Zhu (2017). Molecular dynamics simulation aiming at interfacial characteristics of polymer chains on nanotubes with different layers. AIP conference proceedings.DOI
31. 姜剑，顾伯勤，张斌，宇晓明，陈立立（2016）. 大变形条件下短纤维增强橡胶基复合材料的力学行为. 《南京工业大学学报(自然科学版)》.
32. 张斌，宇晓明，顾伯勤（2016）. 海泡石增强橡胶密封复合材料横向压缩性能的细观力学模型. 《高分子材料科学与工程》.
33. 陈立立，顾伯勤，张斌，宇晓明，姜剑（2016）. 芳纶纤维表面涂层制备及其黏弹性表征. 《南京工业大学学报(自然科学版)》.
34. 王宜，顾伯勤，邵春雷（2016）. 基于Lagrange算法的熔盐泵叶轮内稀疏颗粒的跟随性分析. 《南京工业大学学报(自然科学版)》.
35. 邵春雷，顾伯勤，周剑锋，程文洁（2016）. 熔盐泵外特性及内部流动的试验及数值模拟. 《航空动力学报》.
36. Lili Chen, Boqin Gu (2016). Predicting fatigue damage in interphase of short fiber reinforced rubber composites under transverse load. Polymer Composites.DOI
37. Kun Li, Boqin Gu, Wanfu Zhu (2016). Numerical Calculation of Energy Between the Sealing Materials and Sepiolite Crystal on the Different Directions. International Conference on Advanced Materials and Computer Science (ICAMCS).DOI
38. 张莹，顾伯勤，张斌，宇晓明（2015）. 短碳纤维增强橡胶基密封复合材料的热残余应力数值分析. 《南京工业大学学报(自然科学版)》.
39. 张斌，顾伯勤，宇晓明（2015）. 大模量比短纤维增强复合材料应力分布预测. 《南京工业大学学报(自然科学版)》.
40. 宇晓明，顾伯勤，张斌，陈立立，姜剑（2015）. 短纤维端部形状对其增强复合材料应力分布的影响. 《南京工业大学学报(自然科学版)》.
41. 张斌，顾伯勤，宇晓明（2015）. 短纤维增强橡胶密封复合材料纵向拉伸模量的预测方法. 《上海交通大学学报》.
42. 程文洁，顾伯勤，邵春雷（2015）. 不同黏度下熔盐泵非定常流动的数值分析. 《南京工业大学学报(自然科学版)》.
43. 郝英杰，顾伯勤，邵春雷（2015）. 叶轮切割方式对离心泵外特性和压力脉动的影响. 《南京工业大学学报(自然科学版)》.
44. 王慧娟，顾伯勤（2015）. 改良双锥密封结构及其设计方法. 《南京工业大学学报(自然科学版)》.
45. Xiaoming Yu, Boqin Gu, Bin Zhang (2015). Modeling and experimental validation of transverse compressive behavior of sepiolite reinforced rubber composites. Fibers and Polymers.DOI
46. Xiaoming Yu, Boqin Gu, Bin Zhang (2015). Effects of the short‐fiber tip geometry and interphase properties on the interfacial debonding behavior of rubber matrix composites. Journal of Applied Polymer Science.DOI
47. Bin Zhang, Xiaoming Yu, Boqin Gu (2015). Micromechanical modeling of large deformation in sepiolite reinforced rubber sealing composites under transverse tension. Polymer Composites.DOI
48. Chunlei Shao, Jianfeng Zhou, Boqin Gu, Wenjie Cheng (2015). Experimental Investigation of the Full Flow Field in a Molten Salt Pump by Particle Image Velocimetry. Journal of Fluids Engineering.DOI
49. Xiaoming Yu, Boqin Gu, Bin Zhang, Lili Chen, Jiahui Tao (2015). Interphase effect on the interfacial debonding behavior in short-fiber-reinforced rubber composites.DOI
50. 吴登科，顾伯勤（2014）. 交变载荷作用下纤维增强密封复合材料界面脱黏研究. 《复合材料科学与工程》.
51. 魏龙，顾伯勤，刘其和，张鹏高，房桂芳（2014）. 接触式机械密封端面平均温度耦合计算方法. 《化工学报》.
52. 陈瑶，顾伯勤，周剑锋，吴士伟（2014）. 正弦型波纹管强化传热机制的数值分析. 《南京工业大学学报(自然科学版)》.
53. 校岑，顾伯勤，邵春雷（2014）. 熔盐密度对熔盐泵性能的影响. 《轻工机械》.
54. 孙振国，顾伯勤（2014）. 基于紧密性的法兰模糊可靠性优化设计方法. 《石油化工设备》.
55. 孙振国，顾伯勤（2014）. 螺栓法兰连接模糊可靠性数值计算方法. 《化工机械》.
56. 奚童，顾伯勤，邵春雷（2014）. 基于速度系数法的熔盐离心泵叶轮优化设计. 《电子测试》.
57. Xiaoming Yu, Boqin Gu, Bin Zhang (2014). Effects of short fiber tip geometry and inhomogeneous interphase on the stress distribution of rubber matrix sealing composites. Journal of Applied Polymer Science.DOI
58. Bin Zhang, Boqin Gu, Xiaoming Yu (2014). Failure behavior of resorcinol–formaldehyde latex coated aramid short‐fiber‐reinforced rubber sealing under transverse tension. Journal of Applied Polymer Science.DOI
59. 魏龙，顾伯勤，刘其和，张鹏高，房桂芳（2013）. 机械密封摩擦副端面接触分形模型的修正. 《化工学报》.
60. 魏龙，顾伯勤，张鹏高，房桂芳（2013）. 接触式机械密封端面磨合过程平均膜厚预测. 《化工学报》.
61. 孙振国，顾伯勤（2013）. 高温密封垫片加速寿命试验方法. 《压力容器先进技术——第八届全国压力容器学术会议论文集》.
62. 江振兴，顾伯勤，邵春雷（2013）. 基于现有蜗壳的高效低噪叶轮设计及数值分析. 《南京工业大学学报(自然科学版)》.
63. 周永璋，娄菲菲，朱启武，何莲，顾伯勤（2013）. 油罐沉积水中几种离子浓度对孔蚀的影响. 《南京工业大学学报(自然科学版)》.
64. 谢小敏，顾伯勤（2013）. 焊制斜三通应力的有限元分析. 《轻工机械》.
65. 郑赟，顾伯勤，邵春雷（2013）. 离心泵转子-轴承系统临界转速的数值研究. 《煤矿机械》.
66. 谢小敏，顾伯勤（2013）. 热管换热器模拟重要参数的选择. 《轻工机械》.
67. 秦留军，顾伯勤（2013）. 喷丸强化在改善螺栓抗疲劳性能中的应用. 《润滑与密封》.
68. 周剑锋，陈瑶，顾伯勤（2013）. 矩形管壳式换热器节点温度的计算方法. 《压力容器先进技术——第八届全国压力容器学术会议》.
69. 宇晓明，邵春雷，顾伯勤（2013）. 叶轮切割方式对IS 100-65-200型离心泵性能的影响. 《南京工业大学学报(自然科学版)》.
70. 杨栋君，顾伯勤（2013）. 不同金属骨架变形特性对柔性石墨复合垫片力学性能的影响. 《南京工业大学学报(自然科学版)》.
71. Boqin Gu (2013). Calculation of Certain Important Parameters in Simulation of Heat Pipe Exchanger. Light Industry Machinery.
72. Boqin Gu (2013). Effects of deformation characteristics of metal frameworks on mechanical performance of corrugated gaskets composited with flexible graphite. Journal of Nanjing University of Technology.
73. Boqin Gu (2013). Effects of impeller cutting ways on performances of IS 100-65-200 type centrifugal pump. Journal of Nanjing University of Technology.
74. 魏龙，顾伯勤，张鹏高，房桂芳（2012）. 机械密封磨合过程端面接触特性. 《化工学报》.
75. 刘麟，顾伯勤，李传文（2012）. 垫片外缘最大应力对螺栓法兰连接结构泄漏率影响. 《机械设计与制造》.
76. 李传江，顾伯勤，黄星路（2012）. 横向压缩载荷下短纤维复合材料细观力学分析. 《南京工业大学学报(自然科学版)》.
77. 江见福，顾伯勤，邵春雷（2012）. 多级泵内部流动分析及其性能预测. 《南京工业大学学报(自然科学版)》.
78. 魏龙，顾伯勤，张鹏高（2012）. 接触式机械密封端面磨损预测. 《南京工业大学学报(自然科学版)》.
79. 刘麟，顾伯勤（2012）. 外弯矩和元件蠕变对螺栓法兰连接力学性能的影响. 《润滑与密封》.
80. 朱大胜，顾伯勤（2011）. 非石棉密封复合材料混料机的研制及其混料工艺关键技术分析. 《机床与液压》.
81. 黄星路，孙开俊，顾伯勤，邵春雷，周剑锋（2011）. 非石棉短纤维增强橡胶基密封复合材料的力学设计. 《中国科技论文》.
82. 冯军军，刘麟，顾伯勤（2011）. 外弯矩和蠕变对螺栓法兰连接紧密性的影响. 《机械设计与制造》.
83. 孙开俊，顾伯勤，周剑锋，黄星路（2011）. 单向短纤维增强复合材料纵向弹性模量预测. 《南京工业大学学报(自然科学版)》.
84. 黄星路，朱大胜，顾伯勤（2011）. 短纤维增强橡胶基密封复合材料横向拉伸强度的预测. 《中国科技论文》.
85. 孙开俊，顾伯勤，周剑锋，黄星路（2011）. 单向短纤维增强复合材料应力传递模型及其细观力学分析. 《材料导报》.
86. 刘麟，顾伯勤，孙振国，袁惠新（2011）. 密封垫片高温综合性能试验机的研制. 《润滑与密封》.
87. 孙振国，顾伯勤（2011）. 非金属垫片螺栓法兰连接寿命评价. 《润滑与密封》.
88. 黄星路，刘麟，孙振国，顾伯勤（2011）. 高温球阀阀芯阀座表面处理及其性能评价. 《金属热处理》.
89. 董金善，袁士豪，顾伯勤，周剑锋（2011）. 高压超临界萃取装置的模糊PID控制方法. 《控制工程》.
90. 占龙杨，顾伯勤，邵春雷（2011）. 基于遗传算法的多泵系统优化运行研究. 《煤矿机械》.
91. 冯秀，顾伯勤（2011）. 螺栓法兰金属垫片连接结构的紧密性分析方法. 《润滑与密封》.
92. Boqin Gu (2011). Effect of external bending moment and creep on fluid machinery with bolted flanged connections. Machinery Design and Manufacture.
93. Jianfeng Zhou, GU Bo-qin, Chunlei Shao (2011). Boundary velocity slip of pressure driven liquid flow in a micron pipe. Chinese Science Bulletin.DOI
94. GU Bo-qin (2011). Development of the Mixer and Analysis of the Key Technologies of the Mixing Process for Sealing Composite Reinforced with Non-asbestos Fiber. Machine Tool & Hydraulics.
95. 冯秀，顾伯勤（2010）. 金属垫片密封连接的泄漏率计算. 《化工学报》.
96. 魏龙，顾伯勤，冯飞，冯秀（2010）. 接触式机械密封端面微凸体变形特性研究. 《排灌机械工程学报》.
97. 张耀丰，朱大胜，顾伯勤（2010）. 短纤维增强橡胶基密封复合材料纵向拉伸模量的研究. 《润滑与密封》.
98. 魏龙，顾伯勤，孙见君，冯飞，冯秀（2010）. 机械密封摩擦副端面分形维数的优化. 《化工学报》.
99. 朱文杰，顾伯勤，邵春雷，黄星路，朱瑞松，戴玉林（2010）. 基于计算流体动力学的离心泵空化性能研究. 《煤矿机械》.
100. 郭翔，邵春雷，朱瑞松，戴玉林，黄星路，顾伯勤（2010）. 离心泵内部定常流动的数值模拟. 《煤矿机械》.
101. 刘麟，黄星路，顾伯勤（2010）. 基于非线性垫片径向应力分布的螺栓法兰连接泄漏率预测方法. 《润滑与密封》.
102. 孙振国，顾伯勤，黄星路（2010）. 螺栓法兰连接模糊故障树分析. 《南京工业大学学报(自然科学版)》.
103. 孙见君，何小元，魏龙，冯秀，顾伯勤（2010）. 接触式机械密封端面经济加工分形维数. 《摩擦学学报(中英文)》.
104. 刘麟，顾伯勤（2010）. 螺栓法兰连接中非线性垫片径向应力的解析计算方法. 《核动力工程》.
105. 宦月庆，邵春雷，黄星路，朱瑞松，戴玉林，顾伯勤（2010）. 中比转数离心泵内部流场的三维数值模拟. 《南京工业大学学报(自然科学版)》.
106. 张耀丰，梁鹏，顾伯勤（2010）. 慢应变拉伸速率和H2S,Cl-及H+浓度对08Cr2AlMo钢应力腐蚀开裂的影响. 《压力容器》.
107. 朱瑞松，周寒秋，黄星路，顾伯勤，刘麟（2010）. 金属椭圆环垫压缩回弹特性的数值分析. 《压力容器》.
108. 邵春雷，顾伯勤，黄星路，周剑锋（2010）. 低比转速泵叶轮流道内部流动的PIV试验. 《航空动力学报》.
109. 冯军军，刘麟，顾伯勤（2010）. 基于ABAQUS的承受外弯矩作用的螺栓法兰连接的参数化研究. 《润滑与密封》.
110. Lin Liu, Boqin Gu (2010). Analytical method of nonlinear gasket contact stress along width direction on bolted flanged connections. Hedongli gongcheng.
111. Boqin Gu (2010). Leakage rate calculation of metallic gasket connections.
112. Jianfeng Zhou, Chunlei Shao, GU Bo-qin (2010). Molecular group dynamics study on slip flow of thin fluid film based on the Hamaker hypotheses. Science China Technological Sciences.DOI
113. 朱大胜，顾伯勤，陈晔（2009）. 含粘弹性界面相短纤维/弹性体复合材料的纤维临界长径比数学模型. 《航空材料学报》.
114. 朱大胜，顾伯勤，陈晔（2009）. 非石棉密封复合材料压延机的研制及其压延工艺关键技术. 《机床与液压》.
115. 孙宝寿，陈哲，吴真繁，顾伯勤，黄筱调（2009）. 薄壁注塑件翘曲影响因素分析及优化研究进展. 《机械制造》.
116. 朱大胜，顾伯勤，陈晔（2009）. 纤维增强弹性体基复合材料单纤维拔出试验细观力学分析. 《工程力学》.
117. 周永璋，韩栋樑，曾建民，魏无际，顾伯勤（2009）. 影响油罐沉积水腐蚀行为的因素. 《腐蚀科学与防护技术》.
118. Liujuan Zhu, Wen-Zhong Cai, Boqin Gu, Shan‐Tung Tu (2009). TUNNELING PERCOLATION MODEL OF THE ELECTRICAL CONDUCTIVITY OF PARTICULATE NANOCOMPOSITES. Modern Physics Letters B.DOI
119. Long Wei, Boqin Gu, Xiu Feng, Fei Feng, Jian Long Huang (2009). Fractal Characteristics of End Faces of Carbon-Graphite Seal Rings. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
120. Yuyan Li, Boqin Gu (2009). Research on Lifetime Distribution for Nonmetallic Gasket Sealing. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
121. Zhenguo Sun, Boqin Gu (2009). Effect of External Bending Moment and Creep on Sealing Behavior of Bolted Flanged Connections. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
122. Kaijun Sun, Boqin Gu, Jianfeng Zhou (2009). Study on Fiber Orientation of Short-Fiber-Reinforced Rubber Matrix Sealing Composites Based on Digital Image Processing. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
123. Lin Liu, Boqin Gu (2009). Analytical Method of Gasket Stress on Bolted Flanged Connections in Consideration of External Bending Moments and Elements Creep. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
124. Boqin Gu (2009). Controllability of Spiral Groove Mechanical Seal. Chinese Journal of Mechanical Engineering.
125. Boqin Gu (2009). Abrasive resistance of sprayed Al_2O_3-TiO_2 and WC-Co coatings on high temperature ball valve. Journal of Nanjing University of Technology.
126. Boqin Gu (2009). Automation design method for quick closure structure for supercritical extraction kettle. Journal of Nanjing University of Technology.
127. 孙宝寿，钟皓东，顾伯勤，黄筱调（2008）. 基于MPI的注塑成型熔接痕分析及优化. 《机械设计与制造》.
128. 孙见君，顾伯勤，魏龙，冯秀，刘其和（2008）. 接触式机械密封寿命预测方法. 《化工学报》.
129. 汪世益，黄筱调，顾伯勤（2008）. 进给系统轴承预紧与丝杆拉伸装配的关键技术参数. 《机械工程师》.
130. 孙开俊，顾伯勤，朱大胜，周剑锋，陈晔（2008）. 面向使用性能的非石棉密封复合材料设计方法. 《润滑与密封》.
131. 朱大胜，顾伯勤，陈晔（2008）. 短纤维增强橡胶基密封复合材料细观结构参数及其界面力学行为研究. 《润滑与密封》.
132. 孙宝寿，邓益民，顾伯勤，黄筱调（2008）. 基于DOE的注塑成型工艺参数优化. 《机械制造》.
133. Liujuan Zhu, Wen-Zhong Cai, Shan‐Tung Tu, Boqin Gu (2008). Microstructure-based Computer Simulation and Mechanical Modeling of Particle-reinforced Composites.DOI
134. Long Wei, Boqin Gu, Xiu Feng, Jian‐Jun Sun (2008). Experimental research on friction factor of end faces of contacting mechanical seals. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
135. Boqin Gu, Jianfeng Zhou, Ye Chen, Jianjun Sun (2008). Frictional heat transfer regularity of the fluid film in mechanical seals. Science China Technological Sciences.DOI
136. Boqin Gu (2008). Influence of Micro Perturbation on Performance of Liquid Spiral Groove Mechanical Seal. Tribology.
137. Boqin Gu (2008). Research on Multiple Stresses Accelerate Life Test Spectrum with Multiple Stresses for Gasketed Sealing. Pressure vessel Technology.
138. Boqin Gu (2008). Safety Assessment of Bolted Flanged Connections Subjected to Supplementary Loads Based on Finite Element Method. Pipeline Technique and Equipment.
139. Boqin Gu (2008). Design of Quick Opening Seal Connection for Supercritical Extraction Kettle. Pressure vessel Technology.
140. Boqin Gu (2008). Study on Generation Development and Influence Factors of Air-core in Hydrocyclone. Coal Mine Machinery.
141. 汪明笑，陈晔，顾伯勤（2007）. 表面处理对玻纤/碳纤增强橡胶基密封复合材料性能的影响. 《南京工业大学学报(自然科学版)》.
142. 王敏，陈晔，顾伯勤（2007）. 芳纶-玻纤混杂纤维增强橡胶基密封复合材料制备工艺研究. 《润滑与密封》.
143. 朱大胜，顾伯勤，陈晔（2007）. 短纤维增强弹性体复合材料应力分布及传递细观力学模型(英文). Proceedings of The Fifth International Conference on Physical and Numerical Simulation of Materials Processing.
144. Boqin Gu, Ye Chen, Zhu Dasheng (2007). Prediction of Leakage Rates Through Sealing Connections with Nonmetallic Gaskets. Chinese Journal of Chemical Engineering.DOI
145. Jianfeng Zhou, Boqin Gu, Ye Chen (2007). An Improved Design of Spiral Groove Mechanical Seal. Chinese Journal of Chemical Engineering.DOI
146. Boqin Gu (2007). Study on Fractal Behaviors of Surface Topography of Mechanical Seals. Petro-chemical Equipment.
147. Boqin Gu (2007). Coupling Analysis of Frictional Heat of Fluid Film and Thermal Deformation of Mechanical Seal End Faces. Hedongli gongcheng.
148. Boqin Gu (2007). Effect of fiber surface pretreatment on the performances of carbon/glass hybrid fiber reinforced sealing composite materials. Journal of Nanjing University of Technology.
149. Boqin Gu (2007). INVESTIGATION INTO EFFECT OF SPRING PRESSURE ON PERFORMANCE OF BALANCED MECHANICAL SEALS.
150. Boqin Gu (2007). CHARACTERISTCS OF FLUID FILM IN OPTIMIZED SPIRAL GROOVE MECHANICAL SEAL.
151. 陈晔，顾伯勤，于涛（2006）. 橡胶基密封复合材料中混杂纤维增强效应的研究. 《润滑与密封》.
152. 陈晔，顾伯勤，于涛（2006）. 芳纶-预氧化丝混杂纤维增强橡胶基密封复合材料的配方设计及优化. 《润滑与密封》.
153. 周剑锋，顾伯勤（2006）. 机械密封环端面热变形的分析与BP网络预测. 《化工学报》.
154. 冯秀，顾伯勤（2006）. 金属垫片密封表面形貌的分形表征. 《化工学报》.
155. 孙见君，顾伯勤，魏龙（2006）. 基于分形理论的接触式机械密封泄漏模型. 《化工学报》.
156. Boqin Gu, Xinglu Huang (2006). Investigation of leak detection method by means of measuring the pressure increment in vacuum. Vacuum.DOI
157. Boqin Gu (2006). HEAT-TRANSFER CHARACTER ANALYSIS OF RINGS OF MECHANICAL SEAL. Chinese Journal of Mechanical Engineering.
158. Boqin Gu (2006). Analysis of thermal deformation of end face of mechanical seal ring and forecast based on BP ANN. Journal of Chemical Industry and Engineering.
159. Boqin Gu (2006). Fractal characterization of seal surface topography of metallic gaskets. Journal of Chemical Industry and Engineering.
160. Boqin Gu (2006). Lifetime Prediction of Mechanical Seal Based on Artificial Neural Networks. Fluid Machinery.
161. 蒋小文，顾伯勤（2005）. 螺旋槽干气密封端面间气膜特性. 《化工学报》.
162. 顾伯勤，蒋小文，孙见君，陈晔（2003）. 机械密封技术最新进展. 《化工进展》.
163. 涂善东，王正东，顾伯勤（2003）. 新世纪的化工机械技术展望. 《化工进展》.

书籍章节

1. Boqin Gu, Ye Chen, Jianfeng Zhou (2011). Design, Manufacture and Performance Evaluation of Non-Asbestos Sealing Composites. InTech eBooks.DOI
2. Ye Chen, Boqin Gu (2006). Study on the Criterion of In-plane Instability of Non-reinforced U-shaped Bellows. Springer eBooks.DOI