吴茵｜长沙理工大学｜学者主页

2026

A review of recent advances in ceramic 3D printing technologies

Liu-Yang Duan, Mingyu Bai, Na Xiao, Li Zhang, Hong-Yan Wang, Yin Wu, Binghui Dong, Wenhui Tang, Yong-Hui Li, Zhen Zhang, Wuyi Ming

Journal of Manufacturing Processes

DOI

2026

Processing and applications of glass-ceramics: A comparative review of traditional and non-traditional techniques

Wenbin He, Yin Wu, Binghui Dong, Hong-Yan Wang, Wenhui Tang, Yong-Hui Li, Mingyu Bai, Chun-Meng Chen, Wuyi Ming

Ceramics International

DOI

2026

A review of numerical models for electrical discharge machining transport phenomena

Binghui Dong, Chuan-Yan Chen, Zhen Zhang, Wen-Bin He, Yong-Hui Li, Hong-Yan Wang, Yin Wu, Wenhui Tang, Mingyu Bai, Wuyi Ming

International Journal of Heat and Mass Transfer

DOI

2025

A systematic review of precision mechanical machining processes for monocrystalline silicon based on modeling and simulation

Hong-Yan Wang, Mingyu Bai, Yin Wu, Jinguang Du, Yong Zhang, Wuyi Ming

The International Journal of Advanced Manufacturing Technology

DOI

2013

Application of Doping Ceramics via Infiltration on Translucent Alumina Ceramics: Application of Doping Ceramics via Infiltration on Translucent Alumina Ceramics

Guanwei Liu, Zhi-Peng Xie, Yin Wu

DOI

2012

Fabrication of translucent alumina ceramics from pre-sintered bodies infiltrated with sintering additive precursor solutions

Guanwei Liu, Zhi-Peng Xie, Wei Liu, Lixia Cheng, Yin Wu

DOI

2011

Surface Modification Mechanism of Stearic Acid to Zirconia Powders Induced by Ball Milling for Water-Based Injection Molding

Wei Liu, Zhi-Peng Xie, X. Yang, Yin Wu, C. Jia, Tie-Zhu Bo, Lin-Lin Wang

DOI

2011

Fabrication of ZrO2–CoAl2O4 Composite by Injection Molding and Solution Infiltration

Guanwei Liu, Zhi-Peng Xie, Wei Wang, Yin Wu

DOI

2011

Research Progress of Manipulating Composition and Properties of Ceramics via Liquid Precursor Infiltration Technique: Research Progress of Manipulating Composition and Properties of Ceramics via Liquid Precursor Infiltration Technique

Guanwei Liu, Zhi-Peng Xie, Yin Wu

DOI

2011

Fabrication and mechanical properties of homogeneous zirconia toughened alumina ceramics via cyclic solution infiltration and in situ precipitation

Guanwei Liu, Zhi-Peng Xie, Yin Wu

DOI

2010

苎麻增强聚醚砜复合材料的制备及摩擦学性能研究

吴茵，龙春光

《工程塑料应用》

2010

Effectively Inhibiting Abnormal Grain Growth of Alumina in ZTA with Low‐Content Fine‐Sized ZrO2 Inclusions Introduced by Infiltration and In Situ Precipitation

Guanwei Liu, Zhi-Peng Xie, Yin Wu

DOI

2010

Bonding Strength Between Zirconia Core and Different Veneering Ceramics

Yi-Wen Hu, Xin Zhang, Yin Wu, Wenjie Si

DOI

2010

Crystal Phase Formation and Mechanical Properties of Lithium Disilicate Glass-Ceramics for Dental Restoration

Xin Zhang, Yi-Wen Hu, Yin Wu, Wenjie Si

DOI

2009

Method for preparing black zirconia ceramics at low temperature

Wenjie Si, Yin Wu

2008

Kinetics for Supercritical CO2 Debinding of Injection Molded ZrO2

Yin Wu, Wenjie Si, H. Miao

DOI

2007

Ekonol/G/MoS2/POM复合材料的磨损机理研究

吴茵，陈建兵，周拥仔，龙春光

《食品与机械》

2007

聚苯酯对Ekonol/POM复合材料力学性能的影响

吴茵，陈曙光，陈建兵，华熳煜，龙春光

《长沙大学学报》

2007

不同加载条件对聚甲醛复合材料的摩擦学性能影响

吴茵

《湖南有色金属》

2007

A New Dewaxing Method and its Effect on the Properties of Low-Pressure Injection Molded Ceramics

Yin Wu, Wenjie Si, H. Miao

DOI

2006

聚甲醛复合材料在不同载荷和转速下的摩擦学特性

吴茵，华熳煜，龙春光

《润滑与密封》

2006

聚甲醛复合材料的结晶性

戴春霞，陈建兵，吴茵，华熳煜，龙春光

《高分子材料科学与工程》

2006

机械设计课程设计的改革探索

吴茵，龙春光，华熳煜

《长沙大学学报》

2005

聚甲醛多元复合材料的力学性能和承载能力

龙春光，吴茵，华熳煜

《功能材料》

2005

不同载荷下Ekonol/G/MoS2/PEEK复合材料的摩擦学性能

龙春光，吴茵，华熳煜，戴春霞

《机械工程材料》

2003

SUPERCRITICAL CARBON DIOXIDE DEWAXING FOR LOW-PRESSURE INJECTION MOLDING OF CERAMICS

Yin Wu

2001

因果图在液压传动系统故障诊断中的应用

吴茵

《长沙理工大学学报(自然科学版)》

2001

Formation of aluminum nitride clusters by cyclic vapor–solid process

Yin Wu, W. Miao, Heping Zhou

DOI

2000

Growth of aluminium nitride whiskers by sublimation-recrystallization method

Heping Zhou, Hao Chen, Yao-Cheng Liu, Yin Wu

DOI

2000

Improving thermal conductivity of aluminum nitride ceramics by refining microstructure

Yao-Cheng Liu, Heping Zhou, Yin Wu, Liang Qiao

DOI

2000

Characterization of shock waves treated aluminum nitride powder and its potential for low-temperature sintering

Yin Wu, W. Miao, Heping Zhou, W. Han, Honglu Xue

DOI

2000

Microstructure and dielectric dispersion of low-temperature sintered AlN

Z. Fang, Yao-Cheng Liu, Yin Wu, Heping Zhou

DOI

1999

Effects of binary additives B2O3–Y2O3 on the microstructure and thermal conductivity of aluminum nitride ceramics

Heping Zhou, Yao-Cheng Liu, W. Miao, Yin Wu

DOI

1999

Low-Temperature Sintering of Aluminum Nitride with YF3–CaF2 Binary Additive

Yao-Cheng Liu, Heping Zhou, Liang Qiao, Yin Wu

DOI

1999

Morphologies and growth mechanisms of aluminum nitride whiskers synthesized by carbothermal reduction

R. Fu, Heping Zhou, Chen Lu, Yin Wu

DOI

1999

Synthesis of aluminum nitride fibres from aluminum silicate fibres by carbothermal reduction method

R. Fu, Heping Zhou, Lu Chen, Yin Wu

DOI

1998

Microstructure of low-temperature sintered AlN

Yao-Cheng Liu, Yin Wu, Heping Zhou

DOI

1998

FABRICATION PROCESS AND GROWTH MECHANISM OF AIN WHISKERS BY CARBON THERMAL REDUCTION METHOD

Heping Zhou, Hao Chen, Yin Wu, W. Miao, Beliing

1998

Characteristics of Low-Temperature Sintering of Shocked Aluminium Nitride Powder

Yin Wu, W. Han

1998

Structure characteristics of AlN whiskers fabricated by the carbo-thermal reduction method

Heping Zhou, Hao Chen, Yin Wu, W. Miao, Xi Liu

DOI

1997

Low temperature co-fired AlN multilayer substrates

W. Miao, Yin Wu, Heping Zhou

DOI

1997

Low-temperature sintering of A1N ceramics with shock wave treated powder

W. Miao, Yin Wu, Heping Zhou, W. Han, Fang-Yun Ru

DOI

1997

Morphologies and growth mechanisms of aluminium nitride whiskers

W. Miao, Yin Wu, Heping Zhou

DOI

1995

Method for manufacturing high-heat conductivity aluminium nitride ceramics

Heping Zhou, Yin Wu, Wei-Guo Mou, Yao-Cheng Liu, Fu-Min Ren

精选作品

期刊论文

A review of recent advances in ceramic 3D printing technologies

Processing and applications of glass-ceramics: A comparative review of traditional and non-traditional techniques

A review of numerical models for electrical discharge machining transport phenomena

A systematic review of precision mechanical machining processes for monocrystalline silicon based on modeling and simulation

Application of Doping Ceramics via Infiltration on Translucent Alumina Ceramics: Application of Doping Ceramics via Infiltration on Translucent Alumina Ceramics

Fabrication of translucent alumina ceramics from pre-sintered bodies infiltrated with sintering additive precursor solutions

Surface Modification Mechanism of Stearic Acid to Zirconia Powders Induced by Ball Milling for Water-Based Injection Molding

Fabrication of ZrO2–CoAl2O4 Composite by Injection Molding and Solution Infiltration

Research Progress of Manipulating Composition and Properties of Ceramics via Liquid Precursor Infiltration Technique: Research Progress of Manipulating Composition and Properties of Ceramics via Liquid Precursor Infiltration Technique

Fabrication and mechanical properties of homogeneous zirconia toughened alumina ceramics via cyclic solution infiltration and in situ precipitation

苎麻增强聚醚砜复合材料的制备及摩擦学性能研究

Effectively Inhibiting Abnormal Grain Growth of Alumina in ZTA with Low‐Content Fine‐Sized ZrO2 Inclusions Introduced by Infiltration and In Situ Precipitation

Bonding Strength Between Zirconia Core and Different Veneering Ceramics

Crystal Phase Formation and Mechanical Properties of Lithium Disilicate Glass-Ceramics for Dental Restoration

Method for preparing black zirconia ceramics at low temperature

Kinetics for Supercritical CO2 Debinding of Injection Molded ZrO2

Ekonol/G/MoS2/POM复合材料的磨损机理研究

聚苯酯对Ekonol/POM复合材料力学性能的影响

不同加载条件对聚甲醛复合材料的摩擦学性能影响

A New Dewaxing Method and its Effect on the Properties of Low-Pressure Injection Molded Ceramics

聚甲醛复合材料在不同载荷和转速下的摩擦学特性

聚甲醛复合材料的结晶性

机械设计课程设计的改革探索

聚甲醛多元复合材料的力学性能和承载能力

不同载荷下Ekonol/G/MoS2/PEEK复合材料的摩擦学性能

SUPERCRITICAL CARBON DIOXIDE DEWAXING FOR LOW-PRESSURE INJECTION MOLDING OF CERAMICS

因果图在液压传动系统故障诊断中的应用

Formation of aluminum nitride clusters by cyclic vapor–solid process

Growth of aluminium nitride whiskers by sublimation-recrystallization method

Improving thermal conductivity of aluminum nitride ceramics by refining microstructure

Characterization of shock waves treated aluminum nitride powder and its potential for low-temperature sintering

Microstructure and dielectric dispersion of low-temperature sintered AlN

Effects of binary additives B2O3–Y2O3 on the microstructure and thermal conductivity of aluminum nitride ceramics

Low-Temperature Sintering of Aluminum Nitride with YF3–CaF2 Binary Additive

Morphologies and growth mechanisms of aluminum nitride whiskers synthesized by carbothermal reduction

Synthesis of aluminum nitride fibres from aluminum silicate fibres by carbothermal reduction method

Microstructure of low-temperature sintered AlN

FABRICATION PROCESS AND GROWTH MECHANISM OF AIN WHISKERS BY CARBON THERMAL REDUCTION METHOD

Characteristics of Low-Temperature Sintering of Shocked Aluminium Nitride Powder

Structure characteristics of AlN whiskers fabricated by the carbo-thermal reduction method

Low temperature co-fired AlN multilayer substrates

Low-temperature sintering of A1N ceramics with shock wave treated powder

Morphologies and growth mechanisms of aluminium nitride whiskers

Method for manufacturing high-heat conductivity aluminium nitride ceramics

会议论文

机械原理与机械设计课程一体化反向设计研究

研究方向