闻邦椿

期刊论文

1. 许卓，于翔川，许沛尧，孙宪超，顾大卫，李晖，闻邦椿（2026）. 螺栓连接纤维增强薄壁锥-柱组合壳的固有特性分析. 《振动工程学报》.
2. 许卓，姚楠，顾大卫，谭大鹏，李晖，闻邦椿（2026）. 填充泡沫全复合蜂窝芯层三明治结构非线性阻尼特性研究. 《机械工程学报》.
3. Qian Zhao, Yu Li, Xu Wu, Jing Yuan, Huiming Jiang, Hongliang Yao, Bangchun Wen (2026). A novel semi-active control method for flexible manipulator’s residual vibration based on a parallel magnetorheological damping structure. Mechanical systems and signal processing.DOI
4. Weiwei Wang, Hui Ma, Xu-Min Guo, Xiaochi Qu, Ruixin Zhang, Bangchun Wen (2026). Frequency veering in spatial fluid-conveying pipe systems: unified ANCF modeling and experimental validation. Mechanical systems and signal processing.DOI
5. Dawei Gu, Xiang-chuan Yu, Zhuo Xu, Ye Tian, Shaojun Xie, Zi-Chen Qi, Guang Zhang, Bingbin Zhu, Hui Li, Dapeng Tan, Baisong Pan, Bangchun Wen (2026). Investigation of the natural frequency behavior of fiber-reinforced composite thin-walled conical-cylindrical shells subjected to partial bolt loosening. Mechanics based design of structures and machines.DOI
6. Wei Xu, Jiaqi Wang, Qi Xu, Heng Zhang, Hongliang Yao, Bangchun Wen (2026). Nonlinear dynamics and stability of metamaterial rotor/seal system. Advances in Mechanical Engineering.DOI
7. Jichuan Cao, Hui Li, Jintong Han, Xinyu Cui, 闫海乐, Bo Yang, Zeng Lin, Feng Zhao, Wei Sun, Bangchun Wen (2026). Frequency splitting and vibration evaluation of braided composite toroidal-cylindrical shell with soft coating. Applied Mathematics and Mechanics.DOI
8. Jichuan Cao, Hui Li, Jintong Han, Xinyu Cui, 闫海乐, Bo Yang, Zeng Lin, Feng Zhao, Wei Sun, Bangchun Wen (2026). Unified high-order shear deformation modeling and vibration analysis of arbitrarily spatially shaped braided shells with graded coatings. Thin-Walled Structures.DOI
9. 刘桂珍，陈光，胡春玉，袁聪聪，闻邦椿（2025）. 支座质量变化下的松动故障转子非线性分析. 《中国工程机械学报》.DOI
10. 许卓，初晨，许沛尧，李晖，孙鹏尧，郑利胜，顾大卫，胡长城，张铭芮，闻邦椿（2025）. 全复合蜂窝夹芯板动态特性分析. 《振动工程学报》.
11. Weijiao Chen, Xiaochi Qu, Ruixin Zhang, Xu-Min Guo, Hui Ma, Bangchun Wen (2025). Nonlinear stress analysis of aero-engine pipeline based on semi-analytical method. Applied Mathematics and Mechanics.DOI
12. Weiwei Wang, Hong Guan, Hui Ma, Haozhe Wang, Qin-Qin Mu, Yao Zeng, Yanyan Chen, Bangchun Wen (2025). Dynamic stress analysis of a disc considering actual crack paths: Experiment and simulation. Mechanical systems and signal processing.DOI
13. Dawei Gu, Bo Chen, Jing-Ming Wan, Shaojun Xie, L. Zheng, Zhuo Xu, Pei-Yao Xu, Hui Li, Baisong Pan, Dapeng Tan, Bangchun Wen (2025). Nonlinear Dynamic Modeling of Fiber-Reinforced Composite Truncated Conical Shell with Large Deformation: A Theoretical and Experimental Study. International Journal of Structural Stability and Dynamics.DOI
14. Pei-Yao Xu, Yao Yang, Hui Li, Zhuo Xu, Xiang-Ping Wang, Qing-Kai Han, Bangchun Wen (2025). Free vibration characteristics analysis of rotating composite fiber-reinforced honeycomb cylindrical shells with arbitrary boundary conditions. Composite structures.DOI
15. Dawei Gu, Sai Wu, Zhuo Xu, Ye Tian, Shaojun Xie, Zi-Chen Qi, Guang Zhang, L. Zheng, Bingbin Zhu, Baisong Pan, Bangchun Wen (2025). A vibration analysis model for carbon nanotube reinforced composite conical shells. Mechanics based design of structures and machines.DOI
16. Qian Zhao, Xu-ping Wu, Jing Yuan, Huiming Jiang, Hongliang Yao, Bangchun Wen (2025). Semi-active vibration suppression mechanism of space flexible manipulator based on a variable damping element. International Journal of Structural Stability and Dynamics.DOI
17. Xiang-chuan Yu, Zhuo Xu, Hui Li, Kai Sun, Peiyao Xu, Yan Zhou, Da-wei Gu, Qingkai Han, Bangchun Wen (2025). Nonlinear vibration analysis of fiber-reinforced thin-walled conical-cylindrical bolt-coupled shells with partially attached constrained layer damping. Composite Structures.DOI
18. Hong Guan, Hui Ma, Tianrui Yang, Yanyan Chen, Yao Zeng, Qinqin Mu, Bangchun Wen (2025). Dynamic modeling of a fully flexible rotor-stator system with bolt joint and rubbing-induced nonlinear vibration. Applied Mathematics and Mechanics.DOI
19. Zhaoning Sun, Bangchun Wen (2025). Comparative investigation of the contact coated rough surface coatings using the indentation and flattened methods. Mechanics Research Communications.DOI
20. Hong Guan, X.M. Ding, Hui Ma, Bangchun Wen, Sainan Zhou, Qinqin Mu, Yao Zeng, Yanyan Chen (2025). Dynamic characteristics of rotor system with initial bending induced by the misaligned four-point contact ball bearing. Mechanism and Machine Theory.DOI
21. Wenchao Hu, Xueliang Zhang, Siyuan Yi, Ruoqing Zhang, Wenxin Wang, Bangchun Wen (2025). Special self-balancing behavior in a self-synchronous system with both vibration utilization and vibration suppression functions. Journal of Sound and Vibration.DOI
22. Qingzhao Zhou, Bangchun Wen (2025). High Cycle Fatigue Damage Monitoring Based on Bhattacharyya Coefficient of Acoustic Emission. Russian Journal of Nondestructive Testing.DOI
23. Chen Chen, Xueliang Zhang, Wenchao Hu, Yudong Peng, Bangchun Wen (2025). Sommerfeld effect and synchronization characteristics of two linear oscillators in a circular pipeline considering energy transfer. Archives of Civil and Mechanical Engineering.DOI
24. Hong Guan, Hui Ma, Xi Chen, Qinqin Mu, Yao Zeng, Yanyan Chen, Bangchun Wen, Xumin Guo (2025). Nonlinear vibration of rotor-bearing system considering base-motion and bearing-misalignment. Mechanism and Machine Theory.DOI
25. 徐宏阳，赵翔，马辉，罗忠，韩清凯，闻邦椿（2024）. 含外圈剥落和不对中的齿轮-转子-轴承系统振动分析（英文）. Journal of Central South University.
26. 许卓，许沛尧，初晨，姚楠，李晖，顾大卫，李鹤，闻邦椿（2024）. 基于多层次迭代修正的纤维增强复合薄壁截顶圆锥壳振动响应分析. 《复合材料学报》.
27. 许卓，许沛尧，郑利胜，李晖，李鹤，顾大卫，何明阳，韩清凯，闻邦椿（2024）. 纤维增强截顶圆锥壳固有特性计算及分析. 《航空动力学报》.
28. 王立博，胡晓岳，戴智含，李晖，吴海宏，韩清凯，闻邦椿（2024）. 嵌入流变弹性体智能格栅单元的复材三明治板弯曲特性研究. 《航空动力学报》.
29. Weijiao Chen, Ziwei Guo, Shuo Chen, Yiming Cao, Xu-Min Guo, Hui Ma, Bangchun Wen (2024). Semi-analytic modeling and experimental verification of arbitrary aero-engine complex spatial pipeline. Applied Mathematical Modelling.DOI
30. Qingzhao Zhou, Hui Ma, Mingyu Liu, Xiaopeng Li, Bangchun Wen (2024). Fatigue damage identification based on Kullback-Leibler relative entropy for raw acoustic emission waveform. Mechanical systems and signal processing.DOI
31. Xu-Min Guo, Hui Ma, Han Ge, Shuo Chen, Bangchun Wen (2024). Vibration transmission characteristics analysis of a flexible casing-multiple pipes system. Mechanical systems and signal processing.DOI
32. Qian-Sheng Tang, Chao-Feng Li, Bangchun Wen (2024). Vibration behaviors of cylindrical shell with bolted joint effects: An experimental study. Advances in Mechanical Engineering.DOI
33. Song-tao Zhao, Ming Liu, Hui Ma, Hong Guan, Shan Chang, Xinxin Ma, Bangchun Wen (2024). Effect of SFD on rubbing-induced vibration characteristics in dual-rotor-blade-casing system. Meccanica (Milano. Print).DOI
34. Jin-Song Zhao, Xiaoxuan Gong, Chunyu Zhao, Mengtao Xu, Chang Liu, Bangchun Wen (2024). Investigations on contact characteristics of ball screw considering flexible deformation of screw and nut. Nonlinear dynamics.DOI
35. Ruyu Jia, Hui Li, Jin-Xin Dou, Hongliang Yao, Bangchun Wen (2024). Low-frequency forbidden band characteristics of metamaterials based on combined resonant units. Journal of Vibration and Control.DOI
36. Xu Zhuo, Xiang-chuan Yu, Hui Li, Xu Pei-yao, Gu Da-wei, Qingkai Han, Bangchun Wen (2024). Nonlinear vibration characteristics of fiber-reinforced composite thin-walled conical-cylindrical coupled shells under partial bolt looseness. Thin-Walled Structures.DOI
37. Chen Chen, Xueliang Zhang, Wenchao Hu, Ming Li, Bangchun Wen (2024). Synchronous Coupling Characteristics of a Dual Vibrator-Driven Vibration System with Two Internal Degrees of Freedom. Arabian Journal for Science and Engineering.DOI
38. Zhuo Xu, Nan Yao, Hui Li, Hui Li, Chen Chu, Xian-chao Sun, Da-wei Gu, He Li, He Li, Qingkai Han, Bangchun Wen (2024). The analysis and prediction of nonlinear damping characteristics of partially filled all-composite honeycomb-core sandwich panels. Thin-Walled Structures.DOI
39. Zhuo Xu, Chu Chen, Hui Li, Xu Pei-yao, Sun Peng-yao, Zhang Yong-feng, Gu Da-wei, Qingkai Han, Bangchun Wen (2024). Nonlinear Vibration Characteristics of All-Composite Honeycomb-Core Sandwich Panel: Theoretical and Experimental Investigation. International Journal of Structural Stability and Dynamics.DOI
40. Zhuo Xu, Xiang-chuan Yu, Hui Li, Peiyao Xu, Xian-Chao Sun, Yongfeng Zhang, Da-Wei Gu, Qingkai Han, Bangchun Wen (2024). The Vibration Characteristics Analysis of Fiber-Reinforced Thin-Walled Conical–Cylindrical Composite Shells with Artificial Spring Technique. International Journal of Structural Stability and Dynamics.DOI
41. Zhuo Xu, Xiang-chuan Yu, Hui Li, Peiyao Xu, Xian-chao Sun, Yongfeng Zhang, Da-wei Gu, Qingkai Han, Bangchun Wen (2024). A mathematical model for analyzing the vibration characteristics of fiber-reinforced thin-walled conical-cylinder composite shells with local bolt missing by the artificial spring method. Applied Mathematical Modelling.DOI
42. Wenchao Hu, Zhuangzhuang Cheng, Xueliang Zhang, Jiaxin Zhang, Bangchun Wen (2024). Self-balance characteristics of the vibrating system with four split-driving vibrators. Nonlinear Dynamics.DOI
43. Zhuo Xu, Nan Yao, Hui Li, Chu Chen, Yongfeng Zhang, Da-Wei Gu, He Li, Qingkai Han, Bangchun Wen (2024). Research on the Damping Characteristics of Partially Filled All-Composite Honeycomb-Core Sandwich Panel. International Journal of Structural Stability and Dynamics.DOI
44. Hongyang Xu, Xiang Min Zhao, Hui Ma, Zhong Luo, Qingkai Han, Bangchun Wen (2024). Erratum to: Vibration analysis of a gear-rotor-bearing system with outerring spalling and misalignment. Journal of Central South University.DOI
45. Chen Chen, Xueliang Zhang, Wenchao Hu, Ziqian Li, Shiju Cui, Bangchun Wen (2024). Synchronous stability and self-balancing behavior of a three-body vibrating system driven by four vibrators. Archives of Civil and Mechanical Engineering.DOI
46. Wenchao Hu, Xueliang Zhang, Chen Chen, Zhenbiao Zhang, Bangchun Wen (2024). Self-balancing characteristics of a vibrating system with four reverse internal-driving degrees of freedom. Mechanical Systems and Signal Processing.DOI
47. Hongyang Xu, Xiang Min Zhao, Hui Ma, Zhong Luo, Qingkai Han, Bangchun Wen (2024). Vibration analysis of a gear-rotor-bearing system with outer-ring spalling and misalignment. Journal of Central South University.DOI
48. Yunnan Teng, Bangchun Wen, Liyang Xie (2024). Simulation Analysis on Dynamic Characteristics of Vibration Pile System. Mechanisms and machine science.DOI
49. 金业壮，许卓，邓奕辰，李晖，闻邦椿（2023）. 航空发动机典型振动故障分析软件开发及应用. 《机床与液压》.
50. 王鹏飞，杨阳，徐宏阳，马辉，韩清凯，罗忠，闻邦椿（2023）. 滚动轴承静态和动态不对中对转子系统非线性振动特性的影响（英文）. Journal of Central South University.
51. 罗忠，于冰，孙新宇，闻邦椿（2023）. 薄壁碳纤维管的低能冲击损伤识别方法. 《第十五届全国振动理论及应用学术会议摘要集》.DOI
52. 许卓，徐鹤松，李晖，王相平，张海洋，刘洋，孙伟，马辉，赵丙峰，韩清凯，贾璞，周晋，闻邦椿（2023）. 基础随机激励下纤维增强复合薄板振动疲劳寿命预报. 《航空动力学报》.
53. 陈晨，张学良，胡文超，闻邦椿（2023）. 三个直线运动机械振子的自平衡特性分析. 《第15届全国转子动力学学术大会摘要集》.DOI
54. 胡文超，张学良，陈晨，闻邦椿（2023）. 四机同向驱动五质体机械系统的稳定性及自抑振特性研究. 《第15届全国转子动力学学术大会摘要集》.DOI
55. 郭旭民，马辉，刘坤，闻邦椿（2023）. 考虑参数不确定性的卡箍-管路系统流固耦合振动机理研究. 《第15届全国转子动力学学术大会摘要集》.DOI
56. 汪博，孙伟，马辉，韩清凯，闻邦椿（2023）. 考虑残余内应力的跨尺度材料跳跃结构细观建模及力学参数辨识. 《第15届全国转子动力学学术大会（ROTDYN2023）》.DOI
57. 张恒，许琦，康健，姚红良，闻邦椿（2023）. 耗散弹性超材料转子/密封系统非线性动力学及失稳振动抑制. 《第十五届全国振动理论及应用学术会议（NVTA2023）》.DOI
58. Xu-Min Guo, Jin Zeng, Hui Ma, Shi-Yu Liu, Zhong Luo, Chao-Feng Li, Qing-Kai Han, Bangchun Wen (2023). Semi-analytical modeling and experimental verification of a flexible varying section disk–blades system with elastic supports. Thin-walled structures.DOI
59. Weijiao Chen, Yiming Cao, Xu-Min Guo, Hui Ma, Bangchun Wen, Bo Wang (2023). Semi-analytical dynamic modeling and fluid-structure interaction analysis of L-shaped pipeline. Thin-walled structures.DOI
60. Zhenmin Li, Xueliang Zhang, Weihao Chen, Wei Zhang, C. Li, Xiaobo Wang, Bangchun Wen (2023). Synchronization and stability characteristics of a double-pendulum coupling vibrating system driven by two vibrators. Nonlinear dynamics.DOI
61. Pengfei Wang, Hong-Yang Xu, Hui-Yong Ma, Yang Yang, Qingkai Han, Bangchun Wen, Xiaopeng Li (2023). Nonlinear response of rotor system with bearing dynamic misalignment. Mechanics based design of structures and machines.DOI
62. Weijiao Chen, Yiming Cao, Shuo Chen, Xu-Min Guo, Hui Ma, Bangchun Wen (2023). Semi-analytical dynamic modeling of parallel pipeline considering soft nonlinearity of clamp: A simulation and experimental study. Mechanical systems and signal processing.DOI
63. Zhao-Ning Sun, Bangchun Wen, Xiaopeng Li (2023). A finite element model of the elastic planar and spherical contact with hard and soft coatings. Proceedings of the Institution of mechanical engineers. Part C, journal of mechanical engineering science.DOI
64. Fanjie Li, Xiaopeng Li, Jiahao Li, Hui Ma, Bangchun Wen (2023). Mathematical modeling and dynamic analysis of insulated bearing-steel pedestal system under shaft current damage. Mechanics based design of structures and machines.DOI
65. Chen Chen, Xueliang Zhang, Wenchao Hu, Bangchun Wen (2023). Self-balancing characteristics of three self-synchronous linear motion mechanical oscillators. Structures.DOI
66. Hong-Yang Xu, Pengfei Wang, Hui-Yong Ma, Yang Yang, Xiaopeng Li, Zhong Luo, Qing-Kai Han, Bangchun Wen (2023). Dynamic behaviors and contact characteristics of ball bearings in a multi-supported rotor system under the effects of 3D clearance fit. Mechanical systems and signal processing.DOI
67. Xu-Min Guo, Peixin Gao, Hui Ma, Hui Li, B. Wang, Qing-Kai Han, Bangchun Wen (2023). Vibration characteristics analysis of fluid-conveying pipes concurrently subjected to base excitation and pulsation excitation. Mechanical systems and signal processing.DOI
68. Qi Xu, Yongshuai Lv, Zi-Liang Liu, Hongliang Yao, Bangchun Wen (2023). Vibration characteristics of multi-acoustic metamaterials rotor with geometrical nonlinearity. Nonlinear dynamics.DOI
69. Qian-Sheng Tang, Houxin She, Chao-Feng Li, Bangchun Wen (2023). Influence of Non-uniform Parameter of Bolt Joint on Complexity of Frequency Characteristics of Cylindrical Shell. Chinese Journal of Mechanical Engineering.DOI
70. Chao-Feng Li, Wei Chu, Zi-Jian Zhang, Bangchun Wen (2023). Experimental Study on Disturbance Problem Control of Pendulum Oscillation by Using Moving Mass. Social Science Research Network.DOI
71. Pengfei Wang, Yang Yang, Baogang Wen, Hui-Yong Ma, Qing-Kai Han, Zhong Luo, Xiaopeng Li, Bangchun Wen (2023). Numerical and experimental analysis of vibration characteristics of spindle system under bearing assembly errors. Mechanics based design of structures and machines.DOI
72. Jinsong Zhao, Chunyu Zhao, Zhi-Yuan Jiang, Chang Liu, Mengtao Xu, Bangchun Wen (2023). Static model and reliability analysis of double nut ball screw considering screw bending. Tribology International.DOI
73. Pengfei Wang, Xiang Zhao, Yang Yang, Hui-Yong Ma, Qing-Kai Han, Zhong Luo, Xiaopeng Li, Bangchun Wen (2023). Dynamic modeling and analysis of two-span rotor-pedestal system with bearing tilt and extended defect: simulation and experiment. Applied Mathematical Modelling.DOI
74. Yang Yang, Hui Liu, Hui-Yong Ma, Pengfei Wang, Qing-Kai Han, Bangchun Wen (2023). Experimental study on vibration characteristics due to cage damage of deep groove ball bearing. Tribology International.DOI
75. Qi Xu, Jingqiao Wang, Yongshuai Lv, Hongliang Yao, Bangchun Wen (2023). Vibration characteristics of linear and nonlinear dissipative elastic metamaterials rotor with geometrical nonlinearity. International Journal of Non-Linear Mechanics.DOI
76. Wenchao Hu, Xueliang Zhang, Chen Chen, Ziqian Li, Jiaxin Zhang, Bangchun Wen (2023). Theoretical and numerical studies on stability of multiple eccentric rotors uniformly distributed along the circumference of two rigid bodies. Mechanics Based Design of Structures and Machines.DOI
77. Wenchao Hu, Xueliang Zhang, Chen Chen, Wei Zhang, Bangchun Wen (2023). Stability and Sommerfeld effect in a multi-resonant types vibrating system with isolated rigid frame driven by four exciters. Mechanical Systems and Signal Processing.DOI
78. Hongyang Xu, Hui Ma, Baogang Wen, Yang Yang, Xiaopeng Li, Zhong Luo, Qingkai Han, Bangchun Wen (2023). Dynamic characteristics of spindle-bearing with tilted pedestal and clearance fit. International Journal of Mechanical Sciences.DOI
79. Pengfei Wang, Yang Yang, Hongyang Xu, Hui Ma, Qingkai Han, Zhong Luo, Bangchun Wen (2023). Effect of static and dynamic misalignment of rolling bearing on nonlinear vibration characteristics of rotor system. Journal of Central South University.DOI
80. Yongchao Zhang, Jinchen Ji, Zhaohui Ren, Qing Ni, Bangchun Wen (2023). Multi-sensor open-set cross-domain intelligent diagnostics for rotating machinery under variable operating conditions. Mechanical Systems and Signal Processing.DOI
81. 刘桂珍，马晓君，李小海，袁聪聪，闻邦椿（2022）. 偏心量影响下的松动故障转子非线性分析. 《中国工程机械学报》.
82. 刘子良，简霄翎，姚红良，闻邦椿（2022）. 基于差分进化法的三要素吸振器参数设计. 《中国工程机械学报》.
83. Fanjie Li, Xiaopeng Li, Xingchao Qu, Hui Ma, Bangchun Wen (2022). Nonlinear characteristic analysis of shaft-bearing-pedestal system considering damage of cylindrical roller bearing. International Journal of Non-Linear Mechanics.DOI
84. Weijiao Chen, Yiming Cao, Xu-Min Guo, Hui Ma, Bangchun Wen, B. Wang (2022). Nonlinear vibration analysis of pipeline considering the effects of soft nonlinear clamp. Applied Mathematics and Mechanics.DOI
85. Xu-Min Guo, Yiming Cao, Hui Ma, Hui Li, B. Wang, Qing-Kai Han, Bangchun Wen (2022). Vibration analysis for a parallel fluid-filled pipelines-casing model considering casing flexibility. International Journal of Mechanical Sciences.DOI
86. Hong-Zheng Han, Kaigang Yuan, Hui Ma, Zhike Peng, Zhanwei Li, Song-tao Zhao, Bangchun Wen (2022). Mesh characteristic analysis and dynamic simulation of spur gear pair considering corner contact and tooth broken fault. Engineering Failure Analysis.DOI
87. Fanjie Li, Xiaopeng Li, Baitao Li, Hui Ma, Bangchun Wen (2022). Nonlinear dynamic modeling and vibration analysis of bearing system considering shaft current damage. Mechanics based design of structures and machines.DOI
88. Xueliang Zhang, Zhenmin Li, Wenchao Hu, Bangchun Wen (2022). Synchronization and Stability of a Nonlinear Vibrating Mechanical System Characterized by Asymmetrical Piecewise Linearity. Chinese Journal of Mechanical Engineering.DOI
89. Zhenmin Li, Xueliang Zhang, Weihao Chen, Bangchun Wen (2022). Synchronization characteristics of two vibrator-driven pendulums. Alexandria Engineering Journal.DOI
90. Yunnan Teng, Quan Xing Wen, Liyang Xie, Bangchun Wen (2022). Study on Vibration Friction Reducing Mechanism of Materials. Mathematics.DOI
91. Jingxin Dou, Bangchun Wen (2022). An Adaptive Robust Attitude Tracking Control of Quadrotor UAV with the Modified Rodrigues Parameter. Measurement and Control.DOI
92. Hongyang Xu, Pengfei Wang, Yang Yang, Hui Ma, Zhong Luo, Qingkai Han, Bangchun Wen (2022). Effects of supporting stiffness of deep groove ball bearings with raceway misalignment on vibration behaviors of a gear-rotor system. Mechanism and Machine Theory.DOI
93. Xumin Guo, Chunliang Xiao, Hui Ma, Hui Li, Xufang Zhang, Bangchun Wen (2022). Improved frequency modeling and solution for parallel liquid-filled pipes considering both fluid-structure interaction and structural coupling. Applied Mathematics and Mechanics.DOI
94. Pengfei Wang, Yang Yang, Hui Ma, Hongyang Xu, Xu Li, Zhong Luo, Bangchun Wen (2022). Vibration characteristics of rotor-bearing system with angular misalignment and cage fracture: Simulation and experiment. Mechanical Systems and Signal Processing.DOI
95. Hongyang Xu, Yang Yang, Hui Ma, Zhong Luo, Xiaopeng Li, Qingkai Han, Bangchun Wen (2022). Vibration characteristics of bearing-rotor systems with inner ring dynamic misalignment. International Journal of Mechanical Sciences.DOI
96. Zhenmin Li, Weihao Chen, Wei Zhang, Xueliang Zhang, Bangchun Wen (2022). Theoretical, numerical, and experimental study on the synchronization in a vibrator–pendulum coupling system. Archives of Civil and Mechanical Engineering.DOI
97. Dawei Gu, Juqian Zhang, Quanhui Wu, Pengfei Shen, Baisong Pan, Bangchun Wen (2022). Synchronization of an Exciter and Three Cylindrical Rollers with Different Dry Friction via Dynamic Coupling. Applied Sciences.DOI
98. Dongyang Shang, Xiaopeng Li, Meng Yin, Fanjie Li, Bangchun Wen (2022). Rotation Angle Control Strategy for Telescopic Flexible Manipulator Based on a Combination of Fuzzy Adjustment and RBF Neural Network. Chinese Journal of Mechanical Engineering.DOI
99. Chang Liu, Chunyu Zhao, Bangchun Wen (2022). Dynamics analysis on the MDOF model of ball screw feed system considering the assembly error of guide rails. Mechanical Systems and Signal Processing.DOI
100. Qian Zhao, Jie Liu, Jing Ping Yuan, Huiming Jiang, Linxing Gao, Jun Zhu, Hongliang Yao, Bangchun Wen (2022). Dynamic Response Analysis of Dual-Rotor System with Rubbing Fault by Dimension Reduction Incremental Harmonic Balance Method. International Journal of Structural Stability and Dynamics.DOI
101. Zhenmin Li, Wei Zhang, Wei-Hao Chen, Xueliang Zhang, Chao Li, Bangchun Wen (2022). Special Motion Characteristics of a Vibrating System with a Main Working Rigid Frame Driven by the Pendulum Bob. Journal of Vibration Engineering & Technologies.DOI
102. Xueliang Zhang, Wei Zhang, Weihao Chen, Wenchao Hu, Xu Zhang, Bangchun Wen (2022). Synchronization behaviors of a vibrating mechanical system with adjustable frequencies and motion trajectories. Journal of low frequency noise, vibration and active control.DOI
103. Xueliang Zhang, Wei Zhang, Wei Zhang, Weihao Chen, Xu Zhang, Xu Zhang, Zhihui Wang, Bangchun Wen (2022). Theoretical, Numerical and Experimental Studies on Times–Frequency Synchronization of the Three Exciters Based on the Asymptotic Method. Journal of Vibration Engineering & Technologies.DOI
104. 刘桂珍，袁聪聪，陈正道，于影，闻邦椿（2021）. 激励频率影响下的松动故障转子非线性分析. 《中国工程机械学报》.DOI
105. 李凡杰，李小彭，沃旭，闻邦椿（2021）. 混联汽车悬架系统减振性能分析与优化. 《东北大学学报(自然科学版)》.
106. 闻邦椿（2021）. 全局形态应用型方法论的体系、规则及应用. 《沈阳建筑大学学报(社会科学版)》.
107. 刘桂珍，于影，马晓君，李小海，闻邦椿（2021）. 裂纹角影响下的裂纹转子非线性分析. 《中国工程机械学报》.DOI
108. 李晖，王东升，祖旭东，王洪斌，王相平，韩清凯，闻邦椿（2021）. 涂覆聚脲涂层的纤维增强树脂基复合材料板减振抗冲击性能研究. 《中国科学:技术科学》.
109. 李晖，王昕彤，韩清凯，王相平，闻邦椿，Sung Kyu Ha，Zhongwei Guan（2021）. 基于磁流变弹性体的多功能格栅复合材料三明治板主动振动控制研究. 《第十四届全国振动理论及应用学术会议(NVTA2021)摘要集》.DOI
110. 闻邦椿（2021）. 走好创新路 获取丰收果. 《矿山机械》.DOI
111. 佘厚鑫，李朝峰，闻邦椿（2021）. 柔性叶片-轮盘-转轴系统的耦合振动特性研究. 《第十八届全国非线性振动暨第十五届全国非线性动力学和运动稳定性学术会议（NVND2021）》.DOI
112. 李晖，吕海宇，罗忠，孙伟，韩清凯，秦朝烨，闻邦椿（2021）. 热环境下纤维增强复合圆柱壳非线性振动模型. 《第十八届全国非线性振动暨第十五届全国非线性动力学和运动稳定性学术会议（NVND2021）》.DOI
113. Xumin Guo, Yiming Cao, Hui Ma, Chunliang Xiao, Bangchun Wen (2021). Dynamic analysis of an L-shaped liquid-filled pipe with interval uncertainty. International Journal of Mechanical Sciences.DOI
114. Xueliang Zhang, Xu Zhang, Chen Zhang, Xu Zhang, Chen Zhang, Zhihui Wang, Bangchun Wen (2021). Multiple-frequency synchronization of the four exciters in a far super-resonant vibrating system with an isolation frame. Journal of low frequency noise, vibration and active control.DOI
115. Xueliang Zhang, Xueliang Zhang, Xu Zhang, Xu Zhang, Wenchao Hu, Wei Zhang, Weihao Chen, Zhihui Wang, Bangchun Wen (2021). Theoretical, numerical and experimental studies on multi-cycle synchronization of two pairs of reversed rotating exciters. Mechanical Systems and Signal Processing.DOI
116. Hui Li, Dongsheng Wang, Xudong Zu, Hongbin Wang, Xiangping Wang, Qingkai Han, Bangchun Wen (2021). Research on vibration and impact-resistant performances of fiber reinforced resin matrix composite plates with polyurea coating. Scientia Sinica Technologica.DOI
117. Xueliang Zhang, Wenchao Hu, Zhiguo Gao, Yunshan Liu, Bangchun Wen (2021). Composite synchronization on two pairs of vibrators in a far super-resonant vibrating system with the single rigid frame. Journal of low frequency noise, vibration and active control.DOI
118. Xueliang Zhang, Hongliang Yue, Zhenmin Li, Wenchao Hu, Jinlin Xu, Bangchun Wen (2021). Stability Characteristics of a Vibrating System with Double Rigid Frames Driven by Four Co-Rotating Coupling Vibrators. International Journal of Structural Stability and Dynamics.DOI
119. Chang Liu, Chunyu Zhao, Bangchun Wen (2021). Investigation on coupled vibration of machine tool table system with position deviations. The International Journal of Advanced Manufacturing Technology.DOI
120. Xumin Guo, Kaixuan Ni, Hui Ma, Jin Zeng, Zelong Wang, Bangchun Wen (2021). Dynamic response analysis of shrouded blades under impact-friction considering the influence of passive blade vibration. Journal of Sound and Vibration.DOI
121. Xueliang Zhang, Wenchao Hu, Wei Zhang, Weihao Chen, Hongliang Yue, Bangchun Wen (2021). Theoretical and Numerical Studies on Vibratory Synchronization Transmission of a Vibrating Mechanical System Driven by Single Motor Considering Sliding Dry Friction. IEEE Access.DOI
122. 姜世杰，杨松，闻邦椿，战明（2020）. 高速列车外流场气动噪声的特性研究. 《东北大学学报(自然科学版)》.
123. 闻邦椿（2020）. 机械设计手册 单行本 润滑 密封.
124. 闻邦椿（2020）. 机械设计手册 单行本 疲劳强度设计 机械可靠性设计.
125. 闻邦椿（2020）. 机械设计手册 单行本 机械系统的振动设计及噪声控制.
126. 闻邦椿（2020）. 机械设计手册 单行本 机架、箱体与导轨.
127. 闻邦椿（2020）. 机械设计手册 单行本 齿轮传动.
128. 闻邦椿（2020）. 现代机械设计手册 单行本 常用设计资料和数据.
129. 闻邦椿（2020）. 人人都可挖掘的巨大潜能——谈科学方法论的应用效果. 《机械设计与制造》.DOI
130. 李小彭，杨泽敏，潘五九，王琳琳，徐金池，闻邦椿（2020）. 接触式机械密封端面的分形磨损模型. 《振动、测试与诊断》.DOI
131. 姜世杰，杨松，张博宏，闻邦椿（2020）. 高速列车头车气动噪声的控制方法研究. 《机械设计与制造》.DOI
132. 闻邦椿（2020）. 机械设计手册 单行本 智能设计 仿生机械设计. 《机械工业出版社》.
133. 姜世杰，张一晗，史银芳，闻邦椿（2020）. 离心压缩机叶轮振动特性实验研究与仿真分析. 《机械设计与制造》.DOI
134. 李小彭，尚东阳，李凡杰，闻邦椿（2020）. 输电线巡检机器人位姿变化的柔性关节控制策略. 《东北大学学报(自然科学版)》.
135. 闻邦椿（2020）. 机械设计手册 单行本 机械系统概念设计.
136. 闻邦椿（2020）. 机械设计手册 单行本 机器人与机器人装备.
137. 李晖，吕海宇，李则霖，周娜，闻邦椿（2020）. 热环境下纤维增强树脂复合薄壁圆柱壳的强迫振动响应. 《复合材料学报》.DOI
138. 闻邦椿（2020）. 机械设计手册：单行本. 轴 弹簧. 《机械工业出版社》.
139. 闻邦椿（2020）. 技术哲学方法论 体系和原理 程序和方法.
140. 闻邦椿（2020）. 机械设计手册 单行本 数字化设计.
141. 闻邦椿（2020）. 机械设计手册 单行本 联轴器、离合器与制动器.
142. 闻邦椿（2020）. 机械设计手册：单行本. 滚动轴承. 《机械工业出版社》.
143. 闻邦椿（2020）. 机械设计手册 单行本 机电一体化技术及设计.
144. 卢泽宸，张宝，陈晔，闻邦椿，赵春雨（2020）. 机床平面度检测机构设计及时空映射算法研究. 《组合机床与自动化加工技术》.
145. 闻邦椿（2020）. 机械设计手册：单行本. 数控技术. 《机械工业出版社》.
146. 徐忠浩，李晖，罗忠，韩清凯，闻邦椿（2020）. 螺栓松动边界下纤维增强复合薄板的振动测试方法. 《应用力学学报》.
147. Xu-Min Guo, Jin Zeng, Hui Ma, Chenguang Zhao, Lin Qu, Bangchun Wen (2020). Dynamic characteristics of a shrouded blade with impact and friction. Frontiers of Mechanical Engineering.DOI
148. Hongliang Yao, Yanbo Cao, Qin Zhang, Bangchun Wen (2020). Application of Nonlinear Energy Sink for Rotor System Vibration Suppression. Journal of Mechanical Engineering.DOI
149. H. Li, X. Liang, W. Wang, Z. Xu, Bangchun Wen (2020). A Lumped Parameter Model of a Fibre-Reinforced Composite Plate with Temperature Dependence Based on Thermal Vibration Measurements.DOI
150. Kun-Peng Xu, Bo Wang, Zixu Zhao, Fengjuan Zhao, Xiang-Xi Kong, Bangchun Wen (2020). The influence of rolling bearing parameters on the nonlinear dynamic response and cutting stability of high-speed spindle systems.DOI
151. Xueliang Zhang, Xu Zhang, Chen Zhang, Xu Zhang, Chen Zhang, Zhihui Wang, Bangchun Wen (2020). Double and triple-frequency synchronization and their stable states of the two co-rotating exciters in a vibrating mechanical system. Mechanical Systems and Signal Processing.DOI
152. Qian Zhao, Jing Ping Yuan, Huiming Jiang, Hongliang Yao, Bangchun Wen (2020). Vibration control of a rotor system by shear thickening fluid dampers. Journal of Sound and Vibration.DOI
153. Houxin She, Chaofeng Li, Qiansheng Tang, Bangchun Wen (2020). Veering and merging analysis of nonlinear resonance frequencies of an assembly bladed disk system. Journal of Sound and Vibration.DOI
154. Xiangxi Kong, Chong Zhou, Bangchun Wen (2020). Composite synchronization of four exciters driven by induction motors in a vibration system. Meccanica.DOI
155. Xueliang Zhang, Dawei Gu, Hongliang Yue, Ming Li, Bangchun Wen (2020). Synchronization and stability of a far-resonant vibrating system with three rollers driven by two vibrators. Applied Mathematical Modelling.DOI
156. Yanbo Cao, Hongliang Yao, Qiufeng Li, Peiran Yang, Bangchun Wen (2020). Vibration mitigation and dynamics of a rotor-blade system with an attached nonlinear energy sink. International Journal of Non-Linear Mechanics.DOI
157. Chenguang Zhao, Jin Zeng, Hui Ma, Kaixuan Ni, Bangchun Wen (2020). Dynamic analysis of cracked rotating blade using cracked beam element. Results in Physics.DOI
158. Qiansheng Tang, Chaofeng Li, Houxin She, Bangchun Wen (2020). Analysis of frequency and mode shape of rotating-flexible disk-drum coupled structure with non-continuous connections. International Journal of Mechanical Sciences.DOI
159. Yunshan Liu, Feng Shang, Zhuo Xu, Bangchun Wen (2020). Study on natural characteristics of fiber metal laminates thin plates under cantilever boundary. Journal of Vibroengineering.DOI
160. Xueliang Zhang, Zhenmin Li, Ming Li, Dawei Gu, Bangchun Wen (2020). Theory, numeric, and experiment studies on stability of two homodromy vibrators in a vibrating system with double rigid frames. Journal of Vibration and Control.DOI
161. Xueliang Zhang, Zhenmin Li, Ming Li, Bangchun Wen (2020). Stability and Sommerfeld Effect of a Vibrating System With Two Vibrators Driven Separately by Induction Motors. IEEE/ASME Transactions on Mechatronics.DOI
162. Yanbo Cao, Hongliang Yao, Han Jin-chao, Zhiao Li, Bangchun Wen (2020). Application of non-smooth NES in vibration suppression of rotor-blade systems. Applied Mathematical Modelling.DOI
163. Houxin She, Chaofeng Li, Qiansheng Tang, Bangchun Wen (2020). Effects of blade’s interconnection on the modal characteristics of a shaft-disk-blade system. Mechanical Systems and Signal Processing.DOI
164. Chang Liu, Chunyu Zhao, Xianli Meng, Bangchun Wen (2020). Static load distribution analysis of ball screws with nut position variation. Mechanism and Machine Theory.DOI
165. Jin Zeng, Chenguang Zhao, Hui Ma, Bangchun Wen (2020). Dynamic modeling and coupling characteristics of rotating inclined beams with twisted-shape sections. Frontiers of Mechanical Engineering.DOI
166. Xueliang Zhang, Hongliang Yue, Zhenmin Li, Jinlin Xu, Bangchun Wen (2020). Stability and coupling dynamic characteristics of a vibrating system with one internal degree of freedom and two vibrators. Mechanical Systems and Signal Processing.DOI
167. Zhuo Xu, Zhijiang Gao, Siqi Zhao, Yongfeng Zhang, Bangchun Wen (2020). A nonlinear vibration model of fiber metal laminated thin plate with amplitude dependent property. Applied Acoustics.DOI
168. Houxin She, Chaofeng Li, Qiansheng Tang, Bangchun Wen (2020). Nonlinear Vibration Analysis of a Rotating Disk-Beam System Subjected to Dry Friction. Shock and Vibration.DOI
169. Yunshan Liu, Xueliang Zhang, Dawei Gu, Lei Jia, Bangchun Wen (2020). Synchronization of a Dual-Mass Vibrating System with Two Exciters. Shock and Vibration.DOI
170. Xiaopeng Li, Dongyang Shang, Renzhen Chen, Bangchun Wen (2020). Control Strategy of Flexible Load Servo Drive System Based on Manipulator Position and Position Transformation. Journal of Mechanical Engineering.DOI
171. 李朕均，赵春雨，闻邦椿，卢泽宸（2019）. 数控机床进给系统热源发热率辨识与热误差预测. 《东北大学学报(自然科学版)》.
172. 闻邦椿（2019）. 科技哲学研究方法论探析. 《科学出版社》.
173. 李晖，吴怀帅，张体南，闻邦椿（2019）. 热环境对基础激励作用下纤维增强树脂基复合薄板振动特性的影响. 《复合材料学报》.DOI
174. 刘子良，张钦，太兴宇，许琦，姚红良，闻邦椿（2019）. 天棚型转子动力吸振器的参数优化. 《风机技术》.DOI
175. 刘畅，赵春雨，韩彦龙，闻邦椿（2019）. 滚珠丝杠螺母副载荷分布的计算方法. 《东北大学学报(自然科学版)》.
176. 刘云山，顾大卫，张居乾，张学良，闻邦椿（2019）. 三激振器振动系统的振动同步传动. 《振动、测试与诊断》.DOI
177. 姜世杰，史银芳，SIYAJEU Yannick，闻邦椿（2019）. FDM薄板振动特性的理论与实验研究. 《东北大学学报(自然科学版)》.
178. 张宝，赵春雨，闻邦椿（2019）. 机床动态切削力测定试验与时间序列模型预测. 《东北大学学报(自然科学版)》.
179. 姚红良，李文龙，闻邦椿（2019）. 超声悬浮及转子振动抑制理论与实验研究. 《动力学与控制学报》.
180. 李小彭，徐金池，潘五九，牟佳信，王琳琳，杨泽敏，闻邦椿（2019）. 含齿面分形啮合刚度的齿轮传动系统动力学. 《哈尔滨工业大学学报》.
181. 姚红良，李文龙，刘帅，闻邦椿（2019）. 超声挤压轴承-转子系统动力学特性研究. 《动力学与控制学报》.
182. 李晖，吴腾飞，李则霖，孙伟，闻邦椿（2019）. 基于非接触激振-测振一体化技术的纤维增强复合材料参数辨识研究. 《工程力学》.
183. 马辉，崔璨，曾劲，闻邦椿（2019）. 考虑弹性支承的旋转凸肩叶片动力学特性分析. 《东北大学学报(自然科学版)》.
184. 刘云山，李勤良，闻邦椿（2019）. 离心脱水机试验台的动力学特性. 《中国工程机械学报》.
185. Houxin She, Chao-Feng Li, Qian-Sheng Tang, Hui Ma, Bangchun Wen (2019). Computation and investigation of mode characteristics in nonlinear system with tuned/mistuned contact interface. Frontiers of Mechanical Engineering.DOI
186. Yi-Fan Huangfu, Kangkang Chen, Hui Ma, Xu Li, Xi Yu, Bai-Shun Zhao, Bangchun Wen (2019). Investigation on meshing and dynamic characteristics of spur gears with tip relief under wear fault. Science China Technological Sciences.DOI
187. Yu-Fei Zhang, Jin-Tang Liu, Bangchun Wen (2019). Nonlinear Dynamical Responses of Rotary Cylindrical Shells with Internal Resonance. Acta Mechanica Solida Sinica.DOI
188. Zhuo Xu, Hui Li, Wenyu Wang, Yuan-Ning Liu, Bangchun Wen (2019). Inverse identification of mechanical parameters of fiber metal laminates. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
189. Zhuo Xu, Hui Li, Wenyu Wang, Bangchun Wen (2019). The analysis of vibration characteristics of fiber metal laminated thin plate with partial constrained layer damping patches treatment. Meccanica.DOI
190. Chaofeng Li, Zijian Zhang, Zixuan Zhang, Bangchun Wen (2019). Experimental study of rapid oscillation suppression of a pendulum on the basis of intermittent mass motion. Journal of Vibration and Control.DOI
191. Houxin She, Chaofeng Li, Qiansheng Tang, Bangchun Wen (2019). Influence mechanism of disk position and flexibility on natural frequencies and critical speeds of a shaft-disk-blade unit. Journal of Sound and Vibration.DOI
192. Hongliang Yao, Yuwei Wang, Linqing Xie, Bangchun Wen (2019). Bi-stable buckled beam nonlinear energy sink applied to rotor system. Mechanical Systems and Signal Processing.DOI
193. Kun Yu, Hui Ma, Jin Zeng, Hongzheng Han, Hongfei Li, Bangchun Wen (2019). Frobenius and nuclear hybrid norm penalized robust principal component analysis for transient impulsive feature detection of rolling bearings. ISA Transactions.DOI
194. Xumin Guo, Jin Zeng, Hui Ma, Chenguang Zhao, Xi Yu, Bangchun Wen (2019). A dynamic model for simulating rubbing between blade and flexible casing. Journal of Sound and Vibration.DOI
195. Chaofeng Li, Peiyong Li, Zixuan Zhang, Bangchun Wen (2019). Optimal locations of discontinuous piezoelectric laminated cylindrical shell with point supported elastic boundary conditions for vibration control. Composite Structures.DOI
196. Jin Zeng, Chenguang Zhao, Hui Ma, Kun Yu, Bangchun Wen (2019). Rubbing dynamic characteristics of the blisk-casing system with elastic supports. Aerospace Science and Technology.DOI
197. Hui Li, Pengcheng Xue, Wanchong Rong, Xiaopeng Li, Bangchun Wen (2019). Identification of mechanical parameters of fiber-reinforced composites by frequency response function approximation method. Science Progress.DOI
198. Hongliang Yao, Yanbo Cao, Yuwei Wang, Bangchun Wen (2019). A tri-stable nonlinear energy sink with piecewise stiffness. Journal of Sound and Vibration.DOI
199. Jin Zeng, Hui Ma, Kun Yu, Xumin Guo, Bangchun Wen (2019). Rubbing response comparisons between single blade and flexible ring using different rubbing force models. International Journal of Mechanical Sciences.DOI
200. Hongliang Yao, Yuwei Wang, Yanbo Cao, Bangchun Wen (2019). Multi-stable nonlinear energy sink for rotor system. International Journal of Non-Linear Mechanics.DOI
201. Fan Yuchuan, Chunyu Zhao, Yu Hongye, Bangchun Wen (2019). Dynamic load identification algorithm based on Newmark- β and self-filtering. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
202. Hui Li, Tinan Zhang, Zelin Li, Bangchun Wen, Zhongwei Guan (2019). Modeling of the nonlinear dynamic degradation characteristics of fiber-reinforced composite thin plates in thermal environment. Nonlinear Dynamics.DOI
203. Bao Zhang, Chunyu Zhao, Duo Xu, Bangchun Wen (2019). Simulation analysis and experimental verification of 2-D shape and position error on-line detection for turning workpiece. Measurement.DOI
204. Jin Zeng, Hui Ma, Kun Yu, Zhitao Xu, Bangchun Wen (2019). Coupled flapwise-chordwise-axial-torsional dynamic responses of rotating pre-twisted and inclined cantilever beams subject to the base excitation. Applied Mathematics and Mechanics.DOI
205. Peiyong Li, Chaofeng Li, Ruihuan Qiao, Bangchun Wen (2019). Sensitivity on the non-continuous supported laminated cylindrical shell to boundary conditions and lamination schemes. Archive of Applied Mechanics.DOI
206. Kun Yu, Hui Ma, Hongzheng Han, Jin Zeng, Hongfei Li, Xu Li, Zhitao Xu, Bangchun Wen (2019). Second order multi-synchrosqueezing transform for rub-impact detection of rotor systems. Mechanism and Machine Theory.DOI
207. Juqian Zhang, Zhaohui Ren, Chao Deng, Bangchun Wen (2019). Adaptive fuzzy global sliding mode control for trajectory tracking of quadrotor UAVs. Nonlinear Dynamics.DOI
208. Dawei Gu, Xueliang Zhang, Juqian Zhang, Yunshan Liu, Bangchun Wen (2019). Synchronization and coupling dynamic characteristics of an exciter and two cylindrical rollers in a vibrating system. Journal of Sound and Vibration.DOI
209. Kangkang Chen, Yifan Huangfu, Hui Ma, Zhitao Xu, Xu Li, Bangchun Wen (2019). Calculation of mesh stiffness of spur gears considering complex foundation types and crack propagation paths. Mechanical Systems and Signal Processing.DOI
210. Jianwei Huang, Pengfei Deng, He Li, Bangchun Wen (2019). Stability analysis for milling system with variable pitch cutters under variable speed. Journal of Vibroengineering.DOI
211. Chaofeng Li, Qiansheng Tang, Xi Chenyang, Bingfu Zhong, Bangchun Wen (2019). Coupling vibration behaviors of drum-disk-shaft structures with elastic connection. International Journal of Mechanical Sciences.DOI
212. Dawei Gu, Juqian Zhang, Bangchun Wen, Xueliang Zhang, Yunshan Liu (2019). Theoretical and experimental investigation on controlled synchronization of four co-rotating coupled exciters driven by induction motors in a vibrating system. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
213. Hongliang Yao, Yanbo Cao, Zhiyu Ding, Bangchun Wen (2019). Using grounded nonlinear energy sinks to suppress lateral vibration in rotor systems. Mechanical Systems and Signal Processing.DOI
214. Bingqiang Li, Hui Ma, Xi Yu, Jin Zeng, Xumin Guo, Bangchun Wen (2019). Nonlinear vibration and dynamic stability analysis of rotor-blade system with nonlinear supports. Archive of Applied Mechanics.DOI
215. Xueliang Zhang, Zhihui Wang, Jinlin Xu, Bangchun Wen (2019). Investigations on stability of the synchronous states for three homodromy exciters in the vibrating system with double resonant types. Journal of low frequency noise, vibration and active control.DOI
216. Kun Yu, Hui Ma, Jin Zeng, Hongfei Li, Bangchun Wen (2019). An amplitude weak component detection technique based on normalized time-frequency coefficients and multi-synchrosqueezing operation. Measurement Science and Technology.DOI
217. Hui Li, Pengcheng Xue, Tinan Zhang, Bangchun Wen (2019). Nonlinear vibration study of fiber-reinforced composite thin plate with strain-dependent property based on strain energy density function method. Mechanics of Advanced Materials and Structures.DOI
218. Juqian Zhang, Dawei Gu, Chao Deng, Bangchun Wen (2019). Robust and Adaptive Backstepping Control for Hexacopter UAVs. IEEE Access.DOI
219. Qi Xu, Junkai Niu, Hongliang Yao, Lichao Zhao, Bangchun Wen (2019). Nonlinear dynamic behavior and stability of a rotor/seal system with the dynamic vibration absorber. Advances in Mechanical Engineering.DOI
220. Xueliang Zhang, Zhiguo Gao, Hongliang Yue, Shiju Cui, Bangchun Wen (2019). Stability of a Multiple Rigid Frames Vibrating System Driven by Two Unbalanced Rotors Rotating in Opposite Directions. IEEE Access.DOI
221. Xueliang Zhang, Zhihui Wang, Yunpeng Zhu, Jinlin Xu, Bangchun Wen (2019). Synchronization and Stability of Two Pairs of Reversed Rotating Exciters Mounted on Two Different Rigid Frames. IEEE Access.DOI
222. Chaofeng Li, Tao Li, Ruihuan Qiao, Bangchun Wen (2019). Study on the Damping Mechanism of the Shrouded Blade considering Contact Features. Shock and Vibration.DOI
223. Shijie Jiang, Yang Song, Bohong Zhang, Bangchun Wen (2019). Experimental and Numerical Investigation on the External Aerodynamic Noise of High-Speed Train. Sound&Vibration.DOI
224. Qi Xu, Yuanqing Luo, Hongliang Yao, Lichao Zhao, Bangchun Wen (2019). Eliminating the Fluid‐Induced Vibration and Improving the Stability of the Rotor/Seal System Using the Inerter‐Based Dynamic Vibration Absorber. Shock and Vibration.DOI
225. 许琦，姚红良，刘子良，闻邦椿（2018）. 动力吸振器对转子系统气流激振稳定性影响分析. 《动力学与控制学报》.
226. 李晖，梁晓龙，常永乐，闻邦椿（2018）. 纤维增强复合薄板非线性内共振表征测试方法研究. 《工程力学》.
227. 刘云山，张学良，闻邦椿（2018）. 双机驱动双质体近共振同步运动. 《机械设计与研究》.
228. 刘子良，许琦，李文龙，姚红良，闻邦椿（2018）. 一种转子动力吸振器的参数优化方法. 《航空动力学报》.
229. 李晖，牛义，梁晓龙，闻邦椿（2018）. 基于非线性压缩变换的纤维增强复合薄板非线性阻尼的时域测试方法. 《航空动力学报》.
230. 王天任，孙宏浩，李鹤，闻邦椿（2018）. 罗茨真空泵转子系统动力学建模. 《机械设计与制造》.
231. 谢方涛，崔璨，马辉，闻邦椿（2018）. 一种求解干摩擦带冠叶片动力学响应的方法. 《振动工程学报》.
232. Qian-Sheng Tang, Chao-Feng Li, Houxin She, Bangchun Wen (2018). Modeling and dynamic analysis of bolted joined cylindrical shell. Nonlinear dynamics.DOI
233. Hui Li, Peng-Cheng Xue, Z. Guan, Qing-Kai Han, Bangchun Wen (2018). A new nonlinear vibration model of fiber-reinforced composite thin plate with amplitude-dependent property. Nonlinear dynamics.DOI
234. Hongliang Yao, Yanbo Cao, Shijia Zhang, Bangchun Wen (2018). A novel energy sink with piecewise linear stiffness. Nonlinear dynamics.DOI
235. Xiang-Xi Kong, C. Chen, Bangchun Wen (2018). Dynamic and stability analysis of the vibratory feeder and parts considering interactions in the hop and the hop-sliding regimes. Nonlinear dynamics.DOI
236. Chao-Feng Li, Pei-Yong Li, Bing-Fu Zhong, Bangchun Wen (2018). Geometrically nonlinear vibration of laminated composite cylindrical thin shells with non-continuous elastic boundary conditions. Nonlinear dynamics.DOI
237. Hongliang Yao, Tongzhao Wang, Bangchun Wen, Baijun Qiu (2018). A tunable dynamic vibration absorber for unbalanced rotor system. Journal of Mechanical Science and Technology.DOI
238. Lei Jia, Juqian Zhang, Laihong Zhou, Bangchun Wen (2018). Multifrequency-controlled synchronization of three eccentric rotors driven by induction motors in the same direction. Journal of low frequency noise, vibration and active control.DOI
239. Juqian Zhang, Dawei Gu, Zhaohui Ren, Bangchun Wen (2018). Robust trajectory tracking controller for quadrotor helicopter based on a novel composite control scheme. Aerospace Science and Technology.DOI
240. Qiansheng Tang, Chaofeng Li, Houxin She, Bangchun Wen (2018). Nonlinear response analysis of bolted joined cylindrical-cylindrical shell with general boundary condition. Journal of Sound and Vibration.DOI
241. Kangkang Chen, Hui Ma, Linyang Che, Zhanwei Li, Bangchun Wen (2018). Comparison of meshing characteristics of helical gears with spalling fault using analytical and finite-element methods. Mechanical Systems and Signal Processing.DOI
242. Chaofeng Li, Qiansheng Tang, Houxin She, Bangchun Wen (2018). Natural Characteristic of Thin-Wall Pipe under Uniformly Distributed Pressure. Chinese Journal of Mechanical Engineering.DOI
243. Chaofeng Li, Houxin She, Qiansheng Tang, Bangchun Wen (2018). The coupling vibration characteristics of a flexible shaft-disk-blades system with mistuned features. Applied Mathematical Modelling.DOI
244. Chaofeng Li, Houxin She, Qiansheng Tang, Bangchun Wen (2018). Erratum: Research on the FE and semi-analytical solution with the blade-casing rub-impact dynamical system. Journal of Vibroengineering.DOI
245. Chaofeng Li, Houxin She, Shuhua Yang, Hexing Yu, Bangchun Wen (2018). Erratum: Local vibration characteristics of rotating blades induced by moving rub impact loads. Journal of Vibroengineering.DOI
246. Juqian Zhang, Yuru Shi, Yong Qiang Wu, Bangchun Wen (2018). Nonlinear Hybrid Controller Design for Perturbed Quadrotor Robot by Uncertainties. International Journal of Precision Engineering and Manufacturing.DOI
247. Hui Li, WU Huai-shuai, Tinan Zhang, Bangchun Wen, Zhongwei Guan (2018). A nonlinear dynamic model of fiber-reinforced composite thin plate with temperature dependence in thermal environment. Composites Part B Engineering.DOI
248. Hui Li, Yongle Chang, Zhonghao Xu, Qingyu Zhu, Bangchun Wen (2018). Modal shape measurement of fiber-reinforced composite plate with high efficiency and precision based on laser linear scanning method. Measurement and Control.DOI
249. Laihong Zhou, Juqian Zhang, Jingxin Dou, Bangchun Wen (2018). A fuzzy adaptive backstepping control based on mass observer for trajectory tracking of a quadrotor UAV. International Journal of Adaptive Control and Signal Processing.DOI
250. Jin Zeng, Kangkang Chen, Hui Ma, Tiantang Duan, Bangchun Wen (2018). Vibration response analysis of a cracked rotating compressor blade during run-up process. Mechanical Systems and Signal Processing.DOI
251. Yifan Huangfu, Kangkang Chen, Hui Ma, Linyang Che, Zhanwei Li, Bangchun Wen (2018). Deformation and meshing stiffness analysis of cracked helical gear pairs. Engineering Failure Analysis.DOI
252. Bingqiang Li, Hui Ma, Jin Zeng, Xumin Guo, Bangchun Wen (2018). Rotating blade-casing rubbing simulation considering casing flexibility. International Journal of Mechanical Sciences.DOI
253. Yan‐Ning Sun, Hui Ma, Yifan Huangfu, Kangkang Chen, Linyang Che, Bangchun Wen (2018). A revised time-varying mesh stiffness model of spur gear pairs with tooth modifications. Mechanism and Machine Theory.DOI
254. Hui Ma, Tong Yang, Shiyu Liu, Qi Sun, Bangchun Wen (2018). Effects of Twist Angle on Rubbing Induced Vibration Responses of Blade. Mechanisms and machine science.DOI
255. Shihua Zhou, Yiming Li, Zhaohui Ren, Guiqiu Song, Bangchun Wen (2018). Nonlinear dynamic analysis of a unilateral vibration vehicle system with structural nonlinearity under harmonic excitation. Mechanical Systems and Signal Processing.DOI
256. Qiansheng Tang, Chaofeng Li, Houxin She, Bangchun Wen (2018). Vibration analysis of bolted joined cylindrical-cylindrical shell structure under general connection condition. Applied Acoustics.DOI
257. Jianwei Huang, Ao Zhang, Hongyuan Sun, Shengwen Shi, He Li, Bangchun Wen (2018). Bifurcation and Stability Analyses on Stick-Slip Vibrations of Deep Hole Drilling with State-Dependent Delay. Applied Sciences.DOI
258. Xiangxi Kong, Bangchun Wen (2018). Composite synchronization of a four eccentric rotors driven vibration system with a mass-spring rigid base. Journal of Sound and Vibration.DOI
259. Houxin She, Chaofeng Li, Qiansheng Tang, Bangchun Wen (2018). The investigation of the coupled vibration in a flexible-disk blades system considering the influence of shaft bending vibration. Mechanical Systems and Signal Processing.DOI
260. Dawei Gu, Bangchun Wen, Juqian Zhang (2018). Vibratory synchronization transmission of two cylindrical rollers in a super-resonant vibrating system with symmetrical structure. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
261. Hui Li, Zhengxue Zhou, Hai Ying Sun, Wei Sun, Bangchun Wen (2018). Theoretical Study on the Influence of Hard Coating on Vibration Characteristics of Fiber-Reinforced Composite Thin Shell. Coatings.DOI
262. Qi Sun, Hui Ma, Yunpeng Zhu, Qingkai Han, Bangchun Wen (2018). Comparison of rubbing induced vibration responses using varying-thickness-twisted shell and solid-element blade models. Mechanical Systems and Signal Processing.DOI
263. Chaofeng Li, Zengchuang Shen, Bingfu Zhong, Bangchun Wen (2018). Study on the Nonlinear Characteristics of a Rotating Flexible Blade with Dovetail Interface Feature. Shock and Vibration.DOI
264. Lei Jia, Xiangxi Kong, Juqian Zhang, Yunshan Liu, Bangchun Wen (2018). Multiple‐Frequency Controlled Synchronization of Two Homodromy Eccentric Rotors in a Vibratory System. Shock and Vibration.DOI
265. Qi Xu, Junkai Niu, Hongliang Yao, Lichao Zhao, Bangchun Wen (2018). Fluid‐Induced Vibration Elimination of a Rotor/Seal System with the Dynamic Vibration Absorber. Shock and Vibration.DOI
266. Shijie Jiang, Song Yang, Dan Wu, Bangchun Wen (2018). PREDICTION AND VALIDATION FOR THE AERODYNAMIC NOISE OF HIGH-SPEED TRAIN POWER CAR. Transport Problems.DOI
267. Hui Li, Haitao Luo, Sun We, Bangchun Wen (2018). The Influence of Elastic Boundary on Modal Parameters of Thin Cylindrical Shell. The International Journal of Acoustics and Vibration.DOI
268. 陈晓哲，闻邦椿，李凌轩（2017）. 空间单质体双机同轴线振动系统的自同步特性. 《振动工程学报》.
269. 潘五九，李小彭，李木岩，王雪，高建卓，闻邦椿（2017）. 机械结合面切向接触刚度的三维分形理论建模. 《振动工程学报》.
270. 姚红良，王重阳，陈子冬，闻邦椿（2017）. 转子系统永磁变刚度抑振及吸振研究. 《机械工程学报》.
271. 马辉，孙帆，殷帆丽，王迪，闻邦椿（2017）. 基于悬臂板理论的旋转叶片-机匣振动响应分析. 《振动工程学报》.
272. 李小彭，李加胜，李木岩，闻邦椿（2017）. 机动飞行中转子轴承系统新型碰摩的动力学行为. 《东北大学学报(自然科学版)》.
273. 张学良，闻邦椿，赵春雨（2017）. 双机及多机驱动振动系统同步理论的研究. 《机械工程学报》.
274. 闻邦椿，刘树英，郑玲（2017）. 系统化设计的理论和方法. 《机械设计与研究》.
275. 杨波，夏岩，李鹤，闻邦椿（2017）. TBM推进系统动力学特性分析. 《哈尔滨工程大学学报》.
276. 李晖，常永乐，韩清凯，闻邦椿（2017）. 纤维增强复合薄板非线性振动特性表征测试研究. 《中国力学大会-2017暨庆祝中国力学学会成立60周年大会论文集（A）》.
277. 谢方涛，崔璨，马辉，闻邦椿（2017）. 一种求解扭形带冠叶片干摩擦动力学响应方法. 《第十二届全国振动理论及应用学术会议论文集》.
278. 周来宏，窦景欣，张居乾，闻邦椿（2017）. 基于改进直线涡元诱导速度模型的旋翼自由尾迹计算方法. 《动力学与控制学报》.
279. 李晖，牛义，常永乐，闻邦椿（2017）. 基于半理论法预测基础激励下纤维增强悬臂梁结构应变能. 《航空动力学报》.
280. 张楠，邱燕超，张学良，闻邦椿（2017）. 软式非线性同步振动沉桩系统的动力学分析. 《振动、测试与诊断》.
281. Qi-Bin Wang, Zhanwei Li, Hui Ma, Bangchun Wen (2017). Effects of different coupling models of a helical gear system on vibration characteristics. Journal of Mechanical Science and Technology.DOI
282. Meng-Jiao Feng, Hui Ma, Zhanwei Li, Qi-Bin Wang, Bangchun Wen (2017). An improved analytical method for calculating time-varying mesh stiffness of helical gears. Meccanica (Milano. Print).DOI
283. Chao-Feng Li, Houxin She, Qian-Sheng Tang, Bangchun Wen (2017). The effect of blade vibration on the nonlinear characteristics of rotor–bearing system supported by nonlinear suspension. Nonlinear dynamics.DOI
284. Shihua Zhou, Guiqiu Song, Maojun Sun, Zhaohui Ren, Bangchun Wen (2017). Dynamic interaction of monowheel inclined vehicle-vibration platform coupled system with quadratic and cubic nonlinearities. Journal of Sound and Vibration.DOI
285. Xiangxi Kong, Changzheng Chen, Bangchun Wen (2017). Composite synchronization of three eccentric rotors driven by induction motors in a vibrating system. Mechanical Systems and Signal Processing.DOI
286. Jingxin Dou, Qiansheng Tang, Laihong Zhou, Bangchun Wen (2017). An adaptive sliding mode controller based on global asymptotic convergent observer for attitude tracking of quadrotor unmanned aerial vehicles. Advances in Mechanical Engineering.DOI
287. Juqian Zhang, Laihong Zhou, Cunxu Li, Bangchun Wen (2017). Binary observers based control for quadrotor unmanned aerial vehicle with disturbances and measurement delay. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
288. Wang Zhong, Qi Hua Xu, Ziliang Liu, Hongliang Yao, Bangchun Wen (2017). Research on local rub fault transfer mechanism in rotor system. Journal of Vibroengineering.DOI
289. Zhanwei Li, Hui Ma, Mengjiao Feng, Yunpeng Zhu, Bangchun Wen (2017). Meshing characteristics of spur gear pair under different crack types. Engineering Failure Analysis.DOI
290. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2017). Vibratory synchronization transmission of a cylindrical roller in a vibrating mechanical system excited by two exciters. Mechanical Systems and Signal Processing.DOI
291. Wensheng Zhang, Hui Ma, Jin Zeng, Shuang Wu, Bangchun Wen (2017). Vibration responses analysis of an elastic-support cantilever beam with crack and offset boundary. Mechanical Systems and Signal Processing.DOI
292. Fangtao Xie, Hui Ma, Can Cui, Bangchun Wen (2017). Vibration response comparison of twisted shrouded blades using different impact models. Journal of Sound and Vibration.DOI
293. Shihua Zhou, Guiqiu Song, Zhaohui Ren, Bangchun Wen (2017). Nonlinear dynamic analysis of a parametrically excited vehicle–bridge interaction system. Nonlinear Dynamics.DOI
294. Chunyu Zhao, Bin He, Junjiang Liu, Yanlong Han, Bangchun Wen (2017). Design method of dynamic parameters of a self-synchronization vibrating system with dual mass. Proceedings of the Institution of Mechanical Engineers Part K Journal of Multi-body Dynamics.DOI
295. Jin Zeng, Hui Ma, Wensheng Zhang, Bangchun Wen (2017). Dynamic characteristic analysis of cracked cantilever beams under different crack types. Engineering Failure Analysis.DOI
296. Hongliang Yao, Dasheng Zheng, Bangchun Wen (2017). Magnetic Nonlinear Energy Sink for Vibration Attenuation of Unbalanced Rotor System. Shock and Vibration.DOI
297. Chaofeng Li, Hou-xin She, Wen Liu, Bangchun Wen (2017). The Influence of Shaft’s Bending on the Coupling Vibration of a Flexible Blade‐Rotor System. Mathematical Problems in Engineering.DOI
298. Hui Li, Yi Niu, Chao Mu, Bangchun Wen (2017). Identification of Loss Factor of Fiber-Reinforced Composite Based on Complex Modulus Method. Shock and Vibration.DOI
299. 薛鹏程，李晖，常永乐，闻邦椿（2016）. 悬臂边界下纤维增强复合薄板固有频率计算及验证. 《航空动力学报》.
300. 宋雪萍，刘元伟，刘宇，陈亚哲，闻邦椿（2016）. 双圆弧齿轮转子系统的动态特性分析. 《机械设计》.
301. 贺斌，赵春雨，韩彦龙，闻邦椿（2016）. 双质体振动系统的动力学参数设计方法. 《东北大学学报(自然科学版)》.
302. 唐千升，李朝峰，闻邦椿（2016）. 带有支承间隙的压力管道振动非线性动力学行为研究. 《振动工程学报》.
303. 魏文鹏，李朝峰，王姝宁，闻邦椿（2016）. 液压减震器热力学特性研究. 《机械设计与制造》.
304. 李朝峰，刘文，佘厚鑫，闻邦椿（2016）. 弹性叶片-轮盘-转轴系统的耦合振动特性. 《振动工程学报》.
305. 贺斌，赵春雨，闻邦椿（2016）. 双质体自同步振动系统的动力学耦合特性分析. 《振动工程学报》.
306. 刘杨，李炎臻，太兴宇，董丽媛，闻邦椿（2016）. 转子-滑动轴承系统松动-碰摩耦合故障分析. 《振动工程学报》.
307. Hui Ma, Fanli Yin, X. Tai, D. Wang, Bangchun Wen (2016). Vibration response analysis caused by rubbing between rotating blade and casing. Journal of Mechanical Science and Technology.DOI
308. Hui Ma, Meng-Jiao Feng, Zhanwei Li, Ran-Jiao Feng, Bangchun Wen (2016). Time-varying mesh characteristics of a spur gear pair considering the tip-fillet and friction. Meccanica (Milano. Print).DOI
309. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2016). Theoretical study on synchronization of two exciters in a nonlinear vibrating system with multiple resonant types. Nonlinear dynamics.DOI
310. Shihua Zhou, Guiqiu Song, Zhaohui Ren, Bangchun Wen (2016). Nonlinear analysis of a parametrically excited beam with intermediate support by using Multi-dimensional incremental harmonic balance method. Chaos Solitons & Fractals.DOI
311. Shihua Zhou, Guiqiu Song, Rongpeng Wang, Zhaohui Ren, Bangchun Wen (2016). Nonlinear dynamic analysis for coupled vehicle-bridge vibration system on nonlinear foundation. Mechanical Systems and Signal Processing.DOI
312. Jing Fei Jiang, Shuying Liu, Bangchun Wen (2016). DYNAMICS ANALYSIS, SELECTION AND CALCULATION ON THE PARAMETERS OF A ROTARY VIBRATING SCREEN. Transactions of the Canadian Society for Mechanical Engineering.DOI
313. Hui Ma, Mengjiao Feng, Ranjiao Feng, Jin Zeng, Bangchun Wen (2016). Mesh characteristic and vibration response comprison for geared systems with crack and spalling faults using different modelling method. Prognostics and System Health Management Conference.DOI
314. Xueliang Zhang, Jinlin Xu, Chunyu Zhao, Bangchun Wen (2016). SYNCHRONIZATION OF DUAL HOMODROMY ROTORS WITH ECCENTRIC MASSES IN A NONLINEAR VIBRATING SYSTEM. Transactions of the Canadian Society for Mechanical Engineering.DOI
315. Jianwei Huang, He Li, Ping HAN, Bangchun Wen (2016). Milling Stability Analysis Based on Chebyshev Segmentation. Journal of Physics Conference Series.DOI
316. Xiaozhe Chen, Xiangxi Kong, Yunshan Liu, Bangchun Wen (2016). Synchronization and coupling dynamic characteristics of a dual-rotors exciter. Journal of Vibroengineering.DOI
317. Bin He, Chunyu Zhao, Haiyang Wang, Xuede Chang, Bangchun Wen (2016). Dynamics of synchronization for four hydraulic motors in a vibrating pile driver system. Advances in Mechanical Engineering.DOI
318. Bin He, Chunyu Zhao, Jie Ren, Bangchun Wen (2016). Synchronization for a vibrating system with octa-motors drives on an isolation frame. Journal of Vibroengineering.DOI
319. Hui Ma, Fangtao Xie, Haiqiang Nai, Bangchun Wen (2016). Vibration characteristics analysis of rotating shrouded blades with impacts. Journal of Sound and Vibration.DOI
320. Hui Li, Jia Cheng, Wei Sun, Bangchun Wen (2016). Experimental study on the influence of modal parameters of thin cylindrical shell coated with constrained layer damping. Journal of Vibroengineering.DOI
321. Hui Ma, Zhanwei Li, Mengjiao Feng, Ranjiao Feng, Bangchun Wen (2016). Time-varying mesh stiffness calculation of spur gears with spalling defect. Engineering Failure Analysis.DOI
322. Xiaozhe Chen, Xiangxi Kong, Jingxin Dou, Yunshan Liu, Bangchun Wen (2016). Numerical and experimental investigation on self-synchronization of two eccentric rotors in the vibration system. Journal of Vibroengineering.DOI
323. Xiangxi Kong, Xueliang Zhang, Xiaozhe Chen, Bangchun Wen, Bo Wang (2016). Phase and speed synchronization control of four eccentric rotors driven by induction motors in a linear vibratory feeder with unknown time-varying load torques using adaptive sliding mode control algorithm. Journal of Sound and Vibration.DOI
324. Qian Cheng Zhao, Ziliang Liu, Yonghui He, Hongliang Yao, Bangchun Wen (2016). Dynamic stress prediction method for rubbing blades. Journal of Vibroengineering.DOI
325. Hui Ma, Yang Lu, Zhiyuan Wu, Xingyu Tai, Bangchun Wen (2016). Vibration response analysis of a rotational shaft–disk–blade system with blade-tip rubbing. International Journal of Mechanical Sciences.DOI
326. Xiaozhe Chen, Xiangxi Kong, Xueliang Zhang, Lingxuan Li, Bangchun Wen (2016). On the Synchronization of Two Eccentric Rotors with Common Rotational Axis: Theory and Experiment. Shock and Vibration.DOI
327. Hongliang Yao, Zidong Chen, Bangchun Wen (2016). Dynamic Vibration Absorber with Negative Stiffness for Rotor System. Shock and Vibration.DOI
328. Qiansheng Tang, Chaofeng Li, Bangchun Wen (2016). Analysis on Forced Vibration of Thin-Wall Cylindrical Shell with Nonlinear Boundary Condition. Shock and Vibration.DOI
329. Hui Li, Mingwei Zhu, Zhuo Xu, Zhuo Wang, Bangchun Wen (2016). The Influence on Modal Parameters of Thin Cylindrical Shell under Bolt Looseness Boundary. Shock and Vibration.DOI
330. Chaofeng Li, Qiansheng Tang, Bangchun Wen (2016). Nonlinear Dynamic Behavior Analysis of Pressure Thin-Wall Pipe Segment with Supported Clearance at Both Ends. Mathematical Problems in Engineering.DOI
331. 闻邦椿（2015）. 机械设计手册 单行本 减速器和变速器.
332. 闻邦椿（2015）. 机械设计手册：单行本. 气压传动与控制. 《机械工业出版社》.
333. 李朝峰，周世华，任翔，闻邦椿（2015）. 含有失谐特征的叶片-转盘-转轴转子系统动态特性. 《航空动力学报》.
334. 闻邦椿（2015）. 机械设计手册 单行本 机械工程材料.
335. 赵晓清，徐玉秀，梁晓玉，杨文平，闻邦椿（2015）. 基于振动相关信息融合的行星齿轮传动系统故障诊断. 《机械强度》.
336. 姚红良，王重阳，王帆，闻邦椿（2015）. 多频激励局部非线性系统响应求解的降维增量谐波平衡法. 《振动工程学报》.
337. 许琦，吴昊，赵立超，姚红良，闻邦椿（2015）. 多跨转子系统耦合故障定量诊断方法. 《振动工程学报》.
338. 任朝晖，谢吉祥，周世华，闻邦椿（2015）. 斜齿轮-转子-轴承弯扭轴耦合振动特性分析. 《机械工程学报》.
339. 汪博，孙伟，闻邦椿（2015）. 高转速对电主轴系统动力学特性的影响分析. 《工程力学》.
340. 赵春雨，赵乾斌，贺斌，闻邦椿（2015）. 三质体振动机动力学参数对其性能的影响分析. 《振动与冲击》.
341. 梁晓玉，徐玉秀，邢钢，闻邦椿（2015）. 行星齿轮传动系统复杂微弱故障的非线性特性. 《机械科学与技术》.
342. 马辉，王迪，太兴宇，能海强，闻邦椿（2015）. 碰摩作用下盘片榫连结构接触特性的响应分析. 《航空动力学报》.
343. 马辉，吴志渊，太兴宇，闻邦椿（2015）. 含碰摩故障的转子-盘片-机匣系统动力学特性分析. 《航空动力学报》.
344. 闻邦椿（2015）. 机械设计手册 单行本 工业机器人与数控技术.
345. Hui Ma, Ran-Jiao Feng, Xuedong Pang, Rongze Song, Bangchun Wen (2015). Effects of tooth crack on vibration responses of a profile shifted gear rotor system. Journal of Mechanical Science and Technology.DOI
346. Chao-Feng Li, Houxin She, Qian-Sheng Tang, Bangchun Wen (2015). Research on the FE and semi-analytical solution with the blade-casing rub-impact dynamical system. Journal of Vibroengineering.DOI
347. Hui Ma, Fanli Yin, Yuzhu Guo, X. Tai, Bangchun Wen (2015). A review on dynamic characteristics of blade–casing rubbing. Nonlinear dynamics.DOI
348. Qian Zhao, Hongliang Yao, Qi Xu, Bangchun Wen (2015). Prediction method for steady-state response of local rubbing blade-rotor systems. Journal of Mechanical Science and Technology.DOI
349. Shihua Zhou, Guiqiu Song, Zhaohui Ren, Bangchun Wen (2015). Nonlinear dynamic analysis of coupled gear-rotor-bearing system with the effect of internal and external excitations. Chinese Journal of Mechanical Engineering.DOI
350. Hongliang Yao, Qian Zhao, Hao Wu, Bangchun Wen (2015). Vibration control of rotor system by ultrasonic excited limiter. Journal of Mechanical Science and Technology.DOI
351. He Li, Dan Liu, Lai Jiang, Chunyu Zhao, Bangchun Wen (2015). Self-synchronization theory of dual motor driven vibration system with two-stage vibration isolation frame. Applied Mathematics and Mechanics.DOI
352. Hui Ma, Xueling Wang, Heqiang Niu, Bangchun Wen (2015). Oil-film instability simulation in an overhung rotor system with flexible coupling misalignment. Archive of applied mechanics (1991).DOI
353. Xueliang Zhang, Xiang-Xi Kong, Bangchun Wen, Chunyu Zhao (2015). Numerical and experimental study on synchronization of two exciters in a nonlinear vibrating system with multiple resonant types. Nonlinear dynamics.DOI
354. Hui Ma, Jin Zeng, Zi–Qiang Lang, Long Zhang, Yuzhu Guo, Bangchun Wen (2015). Analysis of the dynamic characteristics of a slant-cracked cantilever beam. Mechanical Systems and Signal Processing.DOI
355. Hui Ma, Fanli Yin, Zhiyuan Wu, Xingyu Tai, Bangchun Wen (2015). Nonlinear vibration response analysis of a rotor-blade system with blade-tip rubbing. Nonlinear Dynamics.DOI
356. Hui Ma, Jin Zeng, Ranjiao Feng, Xu Pang, Bangchun Wen (2015). An improved analytical method for mesh stiffness calculation of spur gears with tip relief. Mechanism and Machine Theory.DOI
357. Xiangxi Kong, Xueliang Zhang, Xiaozhe Chen, Bangchun Wen, Bo Wang (2015). Synchronization analysis and control of three eccentric rotors in a vibrating system using adaptive sliding mode control algorithm. Mechanical Systems and Signal Processing.DOI
358. Hui Ma, Xu Pang, Ranjiao Feng, Bangchun Wen (2015). Evaluation of optimum profile modification curves of profile shifted spur gears based on vibration responses. Mechanical Systems and Signal Processing.DOI
359. Xiangxi Kong, Xiaozhe Chen, Jingxin Dou, Xueliang Zhang, Bangchun Wen (2015). Controlled synchronization of two nonidentical homodromy coupling exciters driven by inductor motors in a vibratory system. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
360. Hui Ma, Yang Lu, Zhiyuan Wu, Xingyu Tai, Hui Li, Bangchun Wen (2015). A new dynamic model of rotor–blade systems. Journal of Sound and Vibration.DOI
361. Ye Li, He Li, Xiaopeng Wei, Bangchun Wen (2015). Verification of self-synchronism of a nonlinear oscillatory system with double homodromy rotors. IEEE International Conference on Mechatronics and Automation (ICMA).DOI
362. Hui Li, Hui Li, Gang Xue, Yang Zhou, He Li, Li He, Bangchun Wen (2015). Receptance coupling for frequency response prediction of cylindrical workpiece in CNC lathe. Journal of Vibroengineering.DOI
363. Hui Ma, Xu Pang, Ranjiao Feng, Jin Zeng, Bangchun Wen (2015). Improved time-varying mesh stiffness model of cracked spur gears. Engineering Failure Analysis.DOI
364. Hui Ma, Jin Zeng, Ranjiao Feng, Xu Pang, Qibin Wang, Bangchun Wen (2015). Review on dynamics of cracked gear systems. Engineering Failure Analysis.DOI
365. Zhaohui Ren, Shihua Zhou, E Chunhui, Ming Gong, Bin Li, Bangchun Wen (2015). Crack fault diagnosis of rotor systems using wavelet transforms. Computers & Electrical Engineering.DOI
366. Hui Ma, Di Wang, Xingyu Tai, Bangchun Wen (2015). Vibration response analysis of blade-disk dovetail structure under blade tip rubbing condition. Journal of Vibration and Control.DOI
367. Hui Ma, Xu Pang, Jin Zeng, Qibin Wang, Bangchun Wen (2015). Effects of gear crack propagation paths on vibration responses of the perforated gear system. Mechanical Systems and Signal Processing.DOI
368. Xiangxi Kong, Wei Sun, Bo Wang, Bangchun Wen (2015). Dynamic and stability analysis of the linear guide with time-varying, piecewise-nonlinear stiffness by multi-term incremental harmonic balance method. Journal of Sound and Vibration.DOI
369. Liu Yang, Jingxin Dou, Bangchun Wen (2015). Identification technique of misalignment-rubbing coupling fault in dual-disk rotor system supported by rolling bearing. Journal of Vibroengineering.DOI
370. He Li, Dan Liu, Ye Li, Chunyu Zhao, Bangchun Wen (2015). The self-synchronous theory of a dual-motor driven vibration mechanism without shimmy. Archive of Applied Mechanics.DOI
371. Shihua Zhou, Zhaohui Ren, Guiqiu Song, Bangchun Wen (2015). Dynamic Characteristics Analysis of the Coupled Lateral-Torsional Vibration with Spur Gear System. International Journal of Rotating Machinery.DOI
372. 周世华，李朝峰，王开宇，闻邦椿（2014）. 风电齿轮箱传动系统的动力学建模. 《东北大学学报(自然科学版)》.
373. 李朝峰，周世华，刘文明，任朝晖，闻邦椿（2014）. 齿轮-转子-滚动轴承传动系统的弯扭耦合振动. 《航空动力学报》.
374. 李小彭，梁亚敏，郭浩，鞠行，闻邦椿（2014）. 结合面广义间隙的等效模型研究. 《振动工程学报》.
375. Chao-Feng Li, Houxin She, Shuhua Yang, Hexing Yu, Bangchun Wen (2014). Local vibration characteristics of rotating blades induced by moving rub-impact loads. Journal of Vibroengineering.DOI
376. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2014). Vibratory synchronization transmission of two exciters in a super-resonant vibrating system. Journal of Mechanical Science and Technology.DOI
377. X. Tai, Hui Ma, Fu-Hao Liu, Yang Liu, Bangchun Wen (2014). Stability and steady-state response analysis of a single rub-impact rotor system. Archive of applied mechanics (1991).DOI
378. Chao-Feng Li, Shihua Zhou, Shi-Jie Jiang, Hexing Yu, Bangchun Wen (2014). Investigation on the stability of periodic motions of a flexible rotor-bearing system with two unbalanced disks. Journal of Mechanical Science and Technology.DOI
379. Shihua Zhou, Jie Liu, Chaofeng Li, Bangchun Wen (2014). Nonlinear behavior of a spur gear pair transmission system with backlash. Journal of Vibroengineering.DOI
380. Hui Ma, Xu Pang, Qibin Wang, Rongze Song, Bangchun Wen (2014). Commentary on effects of tip relief on vibration responses of a geared rotor system. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
381. Hui Ma, Xu Pang, Ranjiao Feng, Rongze Song, Bangchun Wen (2014). Fault features analysis of cracked gear considering the effects of the extended tooth contact. Engineering Failure Analysis.DOI
382. Hui Ma, Qianbin Zhao, Xueyan Zhao, Qingkai Han, Bangchun Wen (2014). Dynamic characteristics analysis of a rotor–stator system under different rubbing forms. Applied Mathematical Modelling.DOI
383. Hui Ma, Xingyu Tai, Qingkai Han, Zhiyuan Wu, Di Wang, Bangchun Wen (2014). A revised model for rubbing between rotating blade and elastic casing. Journal of Sound and Vibration.DOI
384. Chaofeng Li, Shihua Zhou, Jie Liu, Bangchun Wen (2014). Coupled lateral-torsional-axial vibrations of a helical gear-rotor-bearing system. Acta Mechanica Sinica.DOI
385. Hui Ma, Zhiyuan Wu, Xingyu Tai, Bangchun Wen (2014). Dynamic characteristics analysis of a rotor system with two types of limiters. International Journal of Mechanical Sciences.DOI
386. Xiangxi Kong, Xueliang Zhang, Qinliang Li, Bangchun Wen (2014). Dynamical analysis of vibratory feeder and feeding parts considering interactions by an improved increment harmonic balance method. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
387. Zhaohui Ren, Shihua Zhou, Chaofeng Li, Bangchun Wen (2014). Dynamic characteristics of multi-degrees of freedom system rotor-bearing system with coupling faults of rub-impact and crack. Chinese Journal of Mechanical Engineering.DOI
388. Qi Xu, Qian Zhao, Hongliang Yao, Bangchun Wen (2014). Application of fuzzy random finite element method on rotor dynamics. Journal of Vibroengineering.DOI
389. Hui Ma, Rongze Song, Xu Pang, Bangchun Wen (2014). Time-varying mesh stiffness calculation of cracked spur gears. Engineering Failure Analysis.DOI
390. Bo Wang, Wei Sun, Kunpeng Xu, Junyong Zhang, Bangchun Wen (2014). The finite element modeling and stability prediction of high-speed spindle system dynamics with spindle-holder-tool joints. Journal of Vibroengineering.DOI
391. Yang Liu, Qinliang Li, Hongliang Yao, Bangchun Wen (2014). Study on the extraction method of transverse open crack’s information. Journal of Vibroengineering.DOI
392. Chaofeng Li, Shihua Zhou, Shuhua Yang, Xiang Ren, Bangchun Wen (2014). Dynamic Characteristics of Blade-Disk-Rotor System with Structural Mistuned Features. The Open Mechanical Engineering Journal.DOI
393. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2014). Experimental investigation on synchronization of three co-rotating non-identical coupled exciters driven by three motors. Journal of Sound and Vibration.DOI
394. Hui Ma, Rongze Song, Xu Pang, Bangchun Wen (2014). Fault Feature Analysis of a Cracked Gear Coupled Rotor System. Mathematical Problems in Engineering.DOI
395. Bo Wang, Wei Sun, Kunpeng Xu, Junyong Zhang, Bangchun Wen (2014). The Nonlinear Stability Prediction and FEM Modeling of High-Speed Spindle System with Joints Dynamic Characteristics. Shock and Vibration.DOI
396. Hongliang Yao, Qian Zhao, Qi Hua Xu, Bangchun Wen (2014). Comparison of Common Methods in Dynamic Response Predictions of Rotor Systems with Malfunctions. International Journal of Rotating Machinery.DOI
397. He Li, Shuo Li, Meiling Shao, Jinghong Ling, Chunyu Zhao, Bangchun Wen (2014). Analysis of the stability of intermittent cut with energy lost. International Journal of Materials and Product Technology.DOI
398. 刘丽群，刘挺，闻邦椿（2013）. 松动发展过程中转子碰摩动力学特性分析. 《中国工程机械学报》.
399. 刘杨，太兴宇，马辉，闻邦椿（2013）. 双盘三支撑转子轴承系统松动-碰摩耦合故障分析. 《航空动力学报》.
400. 马辉，太兴宇，李焕军，闻邦椿（2013）. 旋转叶片-机匣碰摩模型及试验研究综述. 《航空动力学报》.
401. 孙伟，孔祥希，汪博，闻邦椿（2013）. 直线滚动导轨动力学精细有限元建模. 《重庆大学学报》.
402. 寇海江，袁惠群，闻邦椿，吴文波（2013）. 中心刚体-旋转悬臂板耦合系统碰摩动力特性解析法研究. 《固体力学学报》.
403. 姚红良，韩清凯，闻邦椿（2013）. 多自由度局部非线性系统分析的降维增量谐波平衡法. 《第十四届全国非线性振动暨第十一届全国非线性动力学和运动稳定性学术会议》.
404. 滕云楠，谢里阳，闻邦椿（2013）. 振动沉桩系统动力学特性及运动仿真分析. 《技术融合创新·可靠服务企业·安全产品制胜——2013年全国机械行业可靠性技术学术交流会暨第四届可靠性工程分会第五次全体委员大会论文集》.
405. 孙伟，孔祥希，汪博，闻邦椿（2013）. 直线滚动导轨的Hertz接触建模及接触刚度的理论求解. 《工程力学》.
406. 马辉，汪博，太兴宇，闻邦椿（2013）. 基于接触分析的转定子系统整周碰摩故障模拟. 《工程力学》.
407. 李小彭，鞠行，赵光辉，梁亚敏，闻邦椿（2013）. 考虑摩擦因素的结合面切向接触刚度分形预估模型及其仿真分析. 《摩擦学学报(中英文)》.
408. 刘杨，太兴宇，陈亚哲，马辉，闻邦椿（2013）. 非线性油膜力作用下的碰摩转子系统动力学分析. 《机械设计与制造》.
409. 马辉，太兴宇，牛和强，闻邦椿（2013）. 转定子静态不对中条件下碰摩故障仿真. 《振动工程学报》.
410. 马辉，李辉，唐玉生，闻邦椿（2013）. 两种不同载荷形式下转子系统油膜失稳的数值研究. 《振动工程学报》.
411. 李勤良，赵斌，魏小鹏，闻邦椿（2013）. 基于双质体振动的卧式离心脱水机动力学分析. 《东北大学学报(自然科学版)》.
412. 刘杨，太兴宇，赵倩，闻邦椿（2013）. 转子系统不对中-碰摩耦合故障的动力学特性. 《东北大学学报(自然科学版)》.
413. 许琦，刘子良，姚红良，闻邦椿（2013）. 多跨转子系统不平衡动力学匹配. 《东北大学学报(自然科学版)》.
414. 姬彦巧，赵长宽，姚红良，闻邦椿（2013）. 多学科设计优化流程研究综述. 《制造业自动化》.
415. Chao-Feng Li, Hexing Yu, Shihua Zhou, Bangchun Wen (2013). Simulations and experimental investigation on motion stability of a flexible rotor-bearing system with a transverse crack. Chinese Journal of Mechanical Engineering.DOI
416. He Li, Guangying Song, Junfeng Hou, Shuo Li, Bangchun Wen (2013). A stability analysis of turning process considering the workpiece as a Timoshenko beam. Journal of Vibroengineering.DOI
417. Yang Liu, Xingyu Tai, Qinliang Li, Li-Yuan Dong, Bangchun Wen (2013). Characteristic analysis of looseness-rubbing coupling fault in dual-disk rotor system. Journal of Vibroengineering.DOI
418. Hui Ma, Hui Li, Heqiang Niu, Rongze Song, Bangchun Wen (2013). Numerical and experimental analysis of the first-and second-mode instability in a rotor-bearing system. Archive of Applied Mechanics.DOI
419. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2013). Vibratory synchronization and coupling dynamic characteristics of multiple unbalanced rotors on a mass-spring rigid base. International Journal of Non-Linear Mechanics.DOI
420. Chunyu Zhao, Xiaopeng Li, Feng Wen, Xiaobin Gu, Bangchun Wen (2013). Evaluation of Estimation Models for Multiaxial Fatigue Life. steel research international.DOI
421. Hui Ma, Jian Jun Yang, Rongze Song, Suyan Zhang, Bangchun Wen (2013). Effects of tip relief on vibration responses of a geared rotor system. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
422. Hui Ma, Hui Li, Heqiang Niu, Rongze Song, Bangchun Wen (2013). Nonlinear dynamic analysis of a rotor-bearing-seal system under two loading conditions. Journal of Sound and Vibration.DOI
423. Hui Ma, Hui Li, Xueyan Zhao, Heqiang Niu, Bangchun Wen (2013). Effects of eccentric phase difference between two discs on oil-film instability in a rotor–bearing system. Mechanical Systems and Signal Processing.DOI
424. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2013). Theoretical, numerical and experimental study on synchronization of three identical exciters in a vibrating system. Chinese Journal of Mechanical Engineering.DOI
425. Yang Liu, Xingyu Tai, Qian Zhao, Bangchun Wen (2013). Study on dynamical characteristics of misalign-rubbing coupling fault dual-disk rotor-bearing system. Journal of Vibroengineering.DOI
426. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2013). Synchronization of three non-identical coupled exciters with the same rotating directions in a far-resonant vibrating system. Journal of Sound and Vibration.DOI
427. Xueliang Zhang, Chun-Yu Zhao, Bangchun Wen (2013). Theoretical and Experimental Study on Synchronization of the Two Homodromy Exciters in a Non-Resonant Vibrating System. Shock and Vibration.DOI
428. Bangchun Wen (2013). Looseness-rubbing coupling fault of dual-disk three-support rotor-bearing system. Journal of Aerospace Power.
429. Bangchun Wen (2013). Literature Review on Vibration Mechanism and Fault Diagnosis of the Pipe System of Aero-engine. Machine Tool & Hydraulics.
430. Bangchun Wen (2013). Dynamic Characteristics of Misalignment-Rubbing Coupling Fault for Rotor System. Journal of Northeastern University.
431. Bangchun Wen (2013). Simulation and Experiment Research on the Second Order Oil-film Instability Fault in a Rotor System.
432. Bangchun Wen (2013). Nonlinear Analysis for Rotor System Unsteady Oil Film Force. Machine Tool & Hydraulics.
433. Bangchun Wen (2013). Unbalance Dynamic Matching of Multi-span Rotor System. Journal of Northeastern University.
434. Guizhen Liu, Ying Kin Yu, Bangchun Wen (2013). Nonlinear Analysis of Rotor-stator-bearing System Unsteady Oil Film Force. International Conference on Computer Science and Electronics Engineering (ICCSEE).DOI
435. Bangchun Wen (2013). CONTACT MODELING AND ANALYTICAL SOLUTION OF CONTACT STIFFNESS BY HERTZ THEORY FOR THE LINEAR ROLLING GUIDE SYSTEM. Engineering Mechanics.
436. Bangchun Wen (2013). Systematized Design Theory and Method of Products Based on Scientific Development Outlook. Journal of Mechanical Engineering.DOI
437. Ma Hui, Bo Wang, Xingyu Tai, Bangchun Wen (2013). FULL RUBBING SIMULATION OF A ROTOR-STATOR SYSTEM BASED ON CONTACT ANALYSIS. Engineering Mechanics.
438. Bangchun Wen (2013). Dynamic Analysis of Rubbing Rotor System Supported on Non-Linear Oil Film Bearings. Machinery Design and Manufacture.
439. Bangchun Wen (2013). Influence of Root Connecting Stiffness on Vibration Responses of Rotating Blades. Journal of Northeastern University.
440. Bangchun Wen (2013). Comparison of Two Modeling Methods for Rotor System with Local Thermal Bending. Journal of Northeastern University.
441. Bangchun Wen (2013). Lateral stiffness calculation method study on diaphragm coupling. Chinese journal of construction machinery.
442. Bangchun Wen (2013). Dynamic Characteristics of Dual-Rotor Multi-disks-Rotor System. Journal of Northeastern University.
443. Bangchun Wen (2013). A precise finite element modeling approach for analyzing linear rolling guideway dynamics. Journal of Chongqing University. English Edition.
444. 太兴宇，马辉，谭祯，闻邦椿（2012）. 脉冲力加载下的叶片-机匣动力学特性研究. 《东北大学学报(自然科学版)》.
445. 王得刚，姚红良，冯霏，闻邦椿（2012）. 自同步振动系统的动力学耦合特性及实验. 《振动、测试与诊断》.
446. 刘桂珍，刘杨，陈亚哲，闻邦椿（2012）. 转子轴承系统油膜力特征的非线性动力学分析. 《中国工程机械学报》.
447. 马辉，太兴宇，汪博，闻邦椿（2012）. 松动—碰摩耦合故障转子系统动力学特性分析. 《机械工程学报》.
448. 辛丽丽，闻邦椿（2012）. 考虑物料摩擦的振动输送系统动力学分析. 《振动、测试与诊断》.
449. 尤小梅，陆扬，马星国，闻邦椿（2012）. 2K-H行星传动系统动态可视化研究. 《振动、测试与诊断》.
450. Hongliang Yao, Qingkai Han, Ling-Xuan Li, Bangchun Wen (2012). Detection of rubbing location in rotor system by super-harmonic responses. Journal of Mechanical Science and Technology.DOI
451. Hui Ma, Chaoyang Shi, Qingkai Han, Bangchun Wen (2012). Fixed-point rubbing fault characteristic analysis of a rotor system based on contact theory. Mechanical Systems and Signal Processing.DOI
452. Xueliang Zhang, Bangchun Wen, Chunyu Zhao (2012). Synchronization of three homodromy coupled exciters in a non-resonant vibrating system of plane motion. Acta Mechanica Sinica.DOI
453. Bangchun Wen (2012). Research on Dynamic Characteristics of Rotating Blades Under Aerodynamic Forces. Journal of Northeastern University.
454. Bangchun Wen (2012). Method for Detecting Rubbing Fault in Rotor System Based on Harmonic Components.
455. Bangchun Wen (2012). Self-Synchronization of Two Identical Exciters in a Resonant Vibrating System. Journal of Northeastern University.
456. Bangchun Wen (2012). Slow and sudden variations of misalignment angles for flexible coupling-rotor system. Chinese journal of construction machinery.
457. Bangchun Wen (2012). Comparative Analysis of Dynamics Characteristics for Static and Operation State of High-speed Spindle System.
458. Bangchun Wen (2012). Effect of Fluid Parameters on Vibration Characteristics of Hydraulic Pipe of Aero-engine. Journal of Northeastern University.
459. Xiaomei You, Lei Meng, Bangchun Wen (2012). Structural Innovation Design of the Compressor Impeller.DOI
460. Bangchun Wen (2012). Dynamic Characteristic Analysis of a Rotor System With Pedestal Looseness Under Two Load Cases. Proceedings of the CSEE.
461. Bangchun Wen (2012). Dynamic Characteristic Analysis of a Rotor System with Pedestal Looseness Coupled Rub-impact Fault.
462. Bangchun Wen (2012). Fractal Prediction Model for Tangential Contact Damping of Joint Surface Considering Friction Factors and Its Simulation.
463. Bangchun Wen (2012). Inherent characteristic solution of motorized spindle based on receptance coupling substructure analysis.
464. Bangchun Wen (2012). Dynamic simulation of a vibratory pile driving process. Zhendong yu chongji.
465. 姚红良，韩清凯，冯霏，闻邦椿（2011）. 多自由度局部非线性系统频域响应及局部非线性位置的辨识方法. 《第十三届全国非线性振动暨第十届全国非线性动力学和运动稳定性学术会议》.
466. 李朝峰，戴继双，闻邦椿（2011）. 油膜支撑双盘转子-轴承系统周期运动稳定性与分岔. 《力学学报》.
467. 李小彭，聂巍，赵志杰，闻邦椿（2011）. 直线导轨副动态特性的试验研究及有限元分析. 《组合机床与自动化加工技术》.
468. 姚红良，韩清凯，冯霏，闻邦椿（2011）. 多自由度局部非线性系统频域响应及非线性位置的辨识方法. 《动力学与控制学报》.
469. 孙伟，鲁明，汪博，闻邦椿（2011）. 直线滚动导轨动力学特性分析方法研究. 《制造技术与机床》.
470. 张杰，李晖，李鹤，闻邦椿（2011）. 某型机床动态特性试验分析. 《机械动力学理论及其应用》.
471. 孙伟，汪博，闻邦椿（2011）. 直线滚动导轨结合部动力学特性测试及参数识别. 《东北大学学报(自然科学版)》.
472. 李小彭，赵志杰，聂慧凡，闻邦椿（2011）. 某型数控车床床身的模态分析与结构优化. 《东北大学学报(自然科学版)》.
473. Hongliang Yao, Hong-Bing Ma, Q. Han, Bangchun Wen (2011). Model-Based Fault Diagnosis Approach for Rotor System with Unidentified Supporting Parameters.DOI
474. Feng Liang, Bangchun Wen (2011). Forced vibrations with internal resonance of a pipe conveying fluid under external periodic excitation. Acta Mechanica Solida Sinica.DOI
475. Hui Ma, Xueyan Zhao, Yunnan Teng, Bangchun Wen (2011). Analysis of Dynamic Characteristics for a Rotor System with Pedestal Looseness. Shock and Vibration.DOI
476. Chunyu Zhao, Qinghua Zhao, Yimin Daniel Zhang, Bangchun Wen (2011). Synchronization of two non-identical coupled exciters in a non-resonant vibrating system of plane motion. Journal of Mechanical Science and Technology.DOI
477. Chunyu Zhao, Qinghua Zhao, Zhaomin Gong, Bangchun Wen (2011). Synchronization of Two Self-Synchronous Vibrating Machines on an Isolation Frame. Shock and Vibration.DOI
478. Zhaohui Ren, Qinghua Zhao, Chunyu Zhao, Bangchun Wen (2011). Synchronization of Two Asymmetric Exciters in a Vibrating System. Shock and Vibration.DOI
479. Bangchun Wen (2011). Research on analysis method of dynamics characteristics for linear rolling guide. Manufacturing Technology & Machine Tool.
480. Bangchun Wen (2011). Modal Analysis and Optimization of the Bed Structure of a CNC Machine Tool. Journal of Northeastern University.
481. Bangchun Wen (2011). Uncertainty Analysis of Reliability for Crane Brake. Journal of Northeastern University.
482. Bangchun Wen (2011). Dynamics Characteristics Testing and Parameter Identification for Joints of Linear Rolling Guideway. Journal of Northeastern University.
483. Qingkai Han, Xueyan Zhao, Xingxiu Li, Bangchun Wen (2011). Bifurcations of a Controlled Two-Bar Linkage Motion with Considering Viscous Frictions. Shock and Vibration.DOI
484. Yuegang Luo, Bin Wu, Xiaopeng Li, Bangchun Wen (2011). Study on Generalized Evaluation of Product Quality Based on Integrated Neural Networks. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
485. He Li, Wenbo Fan, Bangchun Wen (2011). Study on Friction Characteristics between Two Bodies under Vibration Working Case. Communications in computer and information science.DOI
486. Bangchun Wen (2011). Development trend of product design theory and method and modern design of products. Journal of Mechanical & Electrical Engineering.
487. Bangchun Wen (2011). Experiment and Finite Element Analysis on DynamicCharacteristics of the Linear Rolling Guide Pair. Modular Machine Tool & Automatic Manufacturing Technique.
488. Bangchun Wen (2011). Research on the Inherent Characteristics of Rotor System with Speed Increasing Gear. Journal of Northeastern University.
489. Bangchun Wen (2011). Wavelet Ridge Determination of Chaotic Motion Characteristics. Journal of Northeastern University.
490. 姚红良，李祥松，王得刚，闻邦椿（2010）. 模糊随机有限元在转子动力学分析中的应用. 《应用力学学报》.
491. 刘金堂，杨晓东，张宇飞，闻邦椿（2010）. 轴向变速运动正交各向异性板的动态稳定性. 《应用力学学报》.
492. 李朝峰，任朝晖，刘杰，闻邦椿（2010）. 多自由度转子-轴承系统周期运动分岔及稳定性研究. 《应用力学学报》.
493. 尤小梅，孟磊，李凌轩，闻邦椿（2010）. 压缩机叶轮部装结构力学性能研究. 《东北大学学报(自然科学版)》.
494. 滕云楠，曾庆辉，姚红良，闻邦椿（2010）. 振动摩擦机理及其非线性动力学特性. 《摩擦学学报(中英文)》.
495. 梁峰，金基铎，杨晓东，闻邦椿（2010）. 弹性地基上输流管道的静态和动态稳定性研究. 《工程力学》.
496. 马辉，太兴宇，孙健，闻邦椿（2010）. 柔性转子系统油膜自激振动试验研究. 《第9届全国转子动力学学术讨论会ROTDYN'2010》.
497. 李朝峰，孙伟，闻邦椿（2010）. 两处碰摩高维转子系统的周期运动稳定性分析. 《第9届全国转子动力学学术讨论会ROTDYN'2010》.
498. 任云鹏，韩清凯，张天侠，闻邦椿（2010）. 基于虚拟样机技术的锻造操作机的动力学仿真. 《东北大学学报(自然科学版)》.
499. 滕云楠，李小彭，杨铎，闻邦椿（2010）. 基于振动沉桩机的振动摩擦系统动力学分析. 《东北大学学报(自然科学版)》.
500. 刘杨，刘挺，冯霏，闻邦椿（2010）. 基于传递矩阵法的振动压实系统动力学分析. 《东北大学学报(自然科学版)》.
501. 姚红良，陈亚哲，韩清凯，闻邦椿（2010）. 模糊随机结构转子系统的稳定性分析. 《第9届全国转子动力学学术讨论会ROTDYN'2010论文集》.
502. 闻邦椿（2010）. 机械设计手册. 第5卷, 机电一体化与控制技术. 《机械工业出版社》.
503. Xiujuan Liu, Chunguang Wang, Chunyu Zhao, Bangchun Wen (2010). Observation and control of phase difference for a vibratory machine of plane motion. International Conference on Computer, Mechatronics, Control and Electronic Engineering.DOI
504. Yimin Zhang, Xiangdong He, Zhou Yang, Qiaoling Liu, Bangchun Wen (2010). Reliability-based sensitivity of mechanical components with arbitrary distribution parameters. Journal of Mechanical Science and Technology.DOI
505. Fumao Wang, Jingyu He, Dongjing Li, Bangchun Wen, Changguo Wang (2010). Study on the power flow transmission characteristics of Roots blower.DOI
506. Qingkai Han, Lina Hao, Hao Zhang, Bangchun Wen (2010). Achievement of chaotic synchronization trajectories of master–slave manipulators with feedback control strategy. Acta Mechanica Sinica.DOI
507. Qingkai Han, Xiaoyu Sun, Xiaoguang Yang, Bangchun Wen (2010). External synchronization of two dynamical systems with uncertain parameters. Science China Technological Sciences.DOI
508. Yuegang Luo, Songhe Zhang, Bin Wu, Bangchun Wen (2010). Stability of Periodic Motion of Nonlinear Elastics Rotor-Bearing System with Coupling Faults of Pedestal Looseness and Rub-Impact. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
509. Chunyu Zhao, Bangchun Wen, Xueliang Zhang (2010). Synchronization of the four identical unbalanced rotors in a vibrating system of plane motion. Science China Technological Sciences.DOI
510. Bangchun Wen (2010). Dynamic Simulation of Forging Manipulator Based on Virtual Prototyping. Journal of Northeastern University.
511. Bangchun Wen (2010). Mechanism of Vibration Friction and Its Non-linear Dynamic Characteristics. Tribology.
512. Qingkai Han, Xueyan Zhao, Xiaoguang Yang, Bangchun Wen (2010). Periodic and Chaotic Motions of a Two‐Bar Linkage with OPCL Controller. Mathematical Problems in Engineering.DOI
513. Bangchun Wen (2010). Analysis on stiffness of rotor system with a switching crack. Zhendong yu chongji.
514. Bangchun Wen (2010). Optimal control for nonlinear vehicle suspension frames. Chinese journal of construction machinery.
515. Bangchun Wen (2010). Dynamic Analysis Based on Transfer Matrix for Vibration-Compaction System. Journal of Northeastern University.
516. Yuegang Luo, Songhe Zhang, Bangchun Wen, Jane W. Z. Lu, Andrew Y. T. Leung, Vai Pan Iu, Kai Meng Mok (2010). Nonlinear Characteristics of Coupling Faults Rotor-bearing System with Slowly Varying Mass. AIP conference proceedings.DOI
517. Bangchun Wen (2010). The dynamic analysis on the rotor system of roots blower. Machinery Design and Manufacture.
518. Bangchun Wen (2010). Application of TRIZ in Micropole Silence Cover Design of Compressor. Machine Tool & Hydraulics.
519. Bangchun Wen (2010). Synthesis on harmonic product design using hierarchical grey model. Chinese journal of construction machinery.
520. Bangchun Wen (2010). Research on Resonance Characteristics of Nonlinear Suspension System of Motor Vehicles. Journal of Northeastern University.
521. Bangchun Wen (2010). Bifurcation and Stability of the Flexible Rotor-bearing System with Rub-impact by a Continuum Model.
522. Bangchun Wen (2010). Control study and simulation analysis of vibration system driven by two motors. Computer Engineering and Applications Journal.
523. 尤小梅，孟磊，闻邦椿（2009）. 面向工艺性能的叶轮部装结构优化. 《机床与液压》.
524. 王正浩，袁惠群，李东，闻邦椿（2009）. 弹性转子系统动力学行为. 《东北大学学报(自然科学版)》.
525. 王正浩，袁惠群，闻邦椿（2009）. 弹性机匣-滚动轴承双盘碰摩转子系统动力学特性. 《振动工程学报》.
526. 滕云楠，孙伟，任朝晖，闻邦椿（2009）. 振动沉桩摩擦系统慢变过程的非线性动力学特性研究. 《第九届真空冶金与表面工程学术会议论文摘要集》.
527. 李朝峰，李小彭，马辉，闻邦椿（2009）. 非线性连续转子轴承系统碰摩故障动力学行为研究. 《振动工程学报》.
528. 王正浩，袁惠群，闻邦椿（2009）. 弹性转子实验台的响应分析. 《力学与实践》.
529. 李朝峰，孙伟，王得刚，闻邦椿（2009）. 两类转子-轴承系统模型非线性特性研究. 《中国机械工程》.
530. 马辉，陈雪莲，滕云楠，闻邦椿（2009）. 转子系统碰摩故障分岔特性的实验研究. 《仪器仪表学报》.DOI
531. 张义民，苏长青，闻邦椿（2009）. 转子系统的频率可靠性分析. 《振动工程学报》.
532. 包日东，龚斌，闻邦椿（2009）. 输流管道混沌运动的凹槽滤波反馈控制研究. 《应用力学学报》.
533. 刘杰，张新敏，李朝峰，闻邦椿（2009）. 基于小波分析的车辆平顺性试验研究. 《组合机床与自动化加工技术》.
534. 韩清凯，张红军，黄振东，闻邦椿（2009）. 基于Kalman滤波的机械系统微弱突变振动信号的检测方法. 《第十二届全国非线性振动暨第九届全国非线性动力学和运动稳定性学术会议》.
535. 罗跃纲，张松鹤，吴斌，闻邦椿（2009）. 转子系统裂纹故障诊断研究. 《第十二届全国非线性振动暨第九届全国非线性动力学和运动稳定性学术会议》.
536. 马辉，孙伟，任朝晖，闻邦椿（2009）. 多盘悬臂转子系统支座松动故障研究. 《航空动力学报》.
537. 赵春雨，王得刚，张昊，李洁，闻邦椿（2009）. 同向回转双机驱动振动系统的频率俘获. 《应用力学学报》.
538. 包日东，金志浩，闻邦椿（2009）. 端部约束悬臂输流管道的动力学特性. 《工程力学》.
539. 王得刚，郭凯，赵春雨，闻邦椿（2009）. 自同步振动机的动力学分析及控制研究. 《机械制造》.
540. Bangchun Wen (2009). Literature review on hysteretic models for nonlinear vibration systems.
541. Bangchun Wen (2009). Mechanism study on raising petroleum production via seismic waves. Chinese journal of construction machinery.
542. Bangchun Wen (2009). Modeling and Modal Analysis of Rotor of the Rolling Piston Type Rotary Compressor. Machinery & Electronics.
543. Bangchun Wen (2009). Optimal Design of Vibration System Driven by Dual-motor Based on Phase Difference Control. Machine Tool & Hydraulics.
544. Bangchun Wen (2009). Investigation into noise analysis and reduction for rolling rotor compressors. Chinese journal of construction machinery.
545. Bangchun Wen (2009). Self-synchronization Theory of a Vibrating System with Two-motor Drives Rotating in Opposite Directions.
546. Bangchun Wen (2009). Application of an Improved Fuzzy AHP Method in the Synthesis Design. Machinery & Electronics.
547. Bangchun Wen (2009). FEM-based Study on Dynamic Behavior of Nonlinear Rotor System. Journal of Northeastern University.
548. Bangchun Wen (2009). A Survey on Intelligent Optimization Design Method for Modern Machinery Product. Machine Tool & Hydraulics.
549. Bangchun Wen (2009). ANALYSIS OF RESPONSE OF ELASTIC ROTOR EXPERIMENTAL TABLE. Lixue yu shijian.
550. Bangchun Wen (2009). Study on dynamic responses of submarine fluid conveying pipeline under eddy stimulation. Dizhen gongcheng yu gongcheng zhendong.
551. Bangchun Wen (2009). Dynamic Behavior of Elastic Rotor System. Journal of Northeastern University.
552. Qingkai Han, Shuai Zhang, Yong Yang, Yanhuai Qu, Bangchun Wen (2009). Distinction of two different nonstationary signals with Hilbert-Huang transform. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
553. Wei Sun, Qingkai Han, Hui Ma, Bangchun Wen (2009). Analyzing kinematics of 3-TPT parallel machine tool by opening visual simulation system. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
554. Qingkai Han, Hongliang Yao, Bangchun Wen (2009). Parameter identifications for a rotor system based on its finite element model and with varying speeds. Acta Mechanica Sinica.DOI
555. Chunyu Zhao, Hongtao Zhu, Yimin Daniel Zhang, Bangchun Wen (2009). Synchronization of two coupled exciters in a vibrating system of spatial motion. Acta Mechanica Sinica.DOI
556. Hui Ma, Wei Sun, Zhaohui Ren, Bangchun Wen (2009). Feature Extraction of Rotor Systems with Coupling Fault with Crack and Rub-Impact. International Congress on Image and Signal Processing (CISP).DOI
557. Qingkai Han, XIAOYU SUN, Xiaoguang Yang, Bangchun Wen (2009). EXTERNAL SYNCHRONIZATION OF A HYSTERETIC SYSTEM WITH A DUFFING SYSTEM BY FEEDBACK CONTROL STRATEGY. International Journal of Structural Stability and Dynamics.DOI
558. Yimin Zhang, Xianzhen Huang, Xufang Zhang, Xiangdong He, Bangchun Wen (2009). System reliability analysis for kinematic performance of planar mechanisms. Chinese Science Bulletin.DOI
559. Degang Wang, Chunyu Zhao, Zhaohui Ren, Bangchun Wen (2009). Control research and optimization design of self-synchronous vibrating machine. Frontiers of Mechanical Engineering in China.DOI
560. Chunyu Zhao, Hongtao Zhu, Ruizi Wang, Bangchun Wen (2009). Synchronization of Two Non-Identical Coupled Exciters in a Non-Resonant Vibrating System of Linear Motion. Part I: Theoretical Analysis. Shock and Vibration.DOI
561. Chunyu Zhao, Hongtao Zhu, Tianju Bai, Bangchun Wen (2009). Synchronization of Two Non-Identical Coupled Exciters in a Non-Resonant Vibrating System of Linear Motion. Part II: Numeric Analysis. Shock and Vibration.DOI
562. Xiaomei You, MA Xing-guo, Bangchun Wen (2009). Analysis on Dynamic Characteristics of Internal Combustion Engine Crankshaft System. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
563. Bangchun Wen (2009). Research on pedestal looseness fault of multi-disc over-hung rotor system. Journal of Aerospace Power.
564. Bangchun Wen (2009). DYNAMICAL BEHAVIORS OF RESTRAINED CANTILEVER PIPE CONVEYING FLUID. Engineering Mechanics.
565. Bangchun Wen (2009). The nonlinear dynamic behavior of a rotor-bearing system with rub-impact by a continuous model.
566. Wei Sun, Hui Ma, Chaofeng Li, Bangchun Wen (2009). Study on Parametric Modeling Based on Visual Optimization Design of Mechanical Product. International Conference on Intelligent Computation Technology and Automation.DOI
567. Bangchun Wen (2009). Dynamic characteristics and limited span analysis of submarine pipeline under different supporting conditions. Dizhen gongcheng yu gongcheng zhendong.
568. Bangchun Wen (2009). Multilayer(3L/8D) design planning oriented to mechanical product.
569. Bangchun Wen (2009). A Novel Method for Locating Rub-Impacts in Rotor Systems Using a Nonlinear Output Frequency Response Functions. Keji daobao.
570. Ya-Zhe Chen, Yang Liu, Ting Liu, Bangchun Wen (2009). Comprehensive Evaluation for Product Quality Generalized Based on Fuzzy Analytic Hierarchy Process. International Conference on Intelligent Computation Technology and Automation.DOI
571. Yuegang Luo, Yuanhu Du, Zhaohui Ren, Bangchun Wen (2009). Nonlinear Characteristics of Rub-Impact Rotor-Bearing System with Slowly Varying Mass. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
572. Hui Ma, Wei Sun, Zhaohui Ren, Bangchun Wen (2009). Feature Analysis of Oil-Film Instability Fault Based on Time-Frequency Methods in Rotor Systems. International Conference on Intelligent Computation Technology and Automation.DOI
573. Bangchun Wen (2009). Natural frequency reliability analysis of rotor system.
574. Bangchun Wen (2009). Research on reliability-based robust design of mechanical system with correlated failure modes. Journal of Engineering Design.
575. Bangchun Wen (2009). Modes in operational modal analysis. Zhendong yu chongji.
576. Hui Ma, Wei Sun, Jishuang Dai, Bangchun Wen, Zongyan Wang (2009). Fault Feature Analysis of Rotor System With Looseness Fault.DOI
577. Chaofeng Li, Zhaohui Ren, Xiaopeng Li, Bangchun Wen (2009). Nonlinear Dynamics Characteristic of Rotor-Bearing System by a Finite Element Model.DOI
578. Xiaomei You, Bangchun Wen, Lei Meng (2009). FEA on Frictional Contact Problem of Assembly Structure of the Impeller. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
579. Yuegang Luo, Songhe Zhang, Zhaohui Ren, Bangchun Wen (2009). Dynamic Characteristics of Nonlinear Elastics Rotor-Bearing System With Coupling Faults of Pedestal Looseness and Rub-Impact.DOI
580. 罗跃纲，闻邦椿（2008）. 双跨转子—轴承系统裂纹—碰摩耦合故障的稳定性. 《机械工程学报》.
581. 罗跃纲，张松鹤，杜元虎，闻邦椿（2008）. 转子系统碰摩故障诊断研究. 《第八届全国转子动力学学术讨论会》.
582. 韩清凯，赵雪彦，闻邦椿（2008）. 利用改进的OPCL控制实现二连杆机构的同步运动. 《第八届全国动力学与控制学术会议》.
583. 韩清凯，赵雪彦，闻邦椿（2008）. 利用模型参考自适应控制二连杆机构的同步运动. 《第二届全国动力学与控制青年学者研讨会》.
584. 闻邦椿（2008）. “工程非线性振动”的研究的若干进展及展望. 《第八届全国动力学与控制学术会议》.
585. 张义民，贺向东，李鹤，闻邦椿（2008）. 具有随机路径的振动传递路径系统的随机响应分析. 《计算力学学报》.
586. 金文，陈长征，金志浩，龚斌，闻邦椿（2008）. 声发射源识别中的三比值特征提取方法研究. 《仪器仪表学报》.
587. 包日东，闻邦椿（2008）. 地震载荷作用下液化土中输流管道动态响应研究. 《工程力学》.
588. 张楠，侯晓林，闻邦椿（2008）. 超声振动特性在磨削加工系统中的应用. 《工具技术》.
589. 包日东，闻邦椿（2008）. 水下悬跨输流管道动力稳定性的DQ解法. 《应用力学学报》.
590. 辛丽丽，梁继辉，闻邦椿（2008）. 振动压实系统的非线性动力学分析. 《机械科学与技术》.
591. 辛丽丽，梁继辉，闻邦椿（2008）. 振动轮跳振现象的振动压路机系统的动力学特性分析. 《中国工程机械学报》.
592. 孙伟，马辉，李小彭，闻邦椿（2008）. 面向制造系统的可视化仿真技术研究. 《组合机床与自动化加工技术》.
593. 尤小梅，马星国，闻邦椿（2008）. 某型军用V8发动机曲轴的动态强度分析. 《组合机床与自动化加工技术》.
594. 王黎，韩磊，韩清凯，张天侠，王学军，闻邦椿（2008）. 各向异性支承的分布质量转子系统的稳定性分析. 《机械设计》.
595. 毛居全，姚红良，闻邦椿（2008）. 质量慢变碰摩故障转子系统动力学诊断研究. 《机械制造》.
596. 韩清凯，陈希红，姚红良，孙伟，闻邦椿（2008）. 弹性支承转子系统频率俘获的仿真分析. 《第八届全国转子动力学学术讨论会论文集》.
597. 姚红良，韩清凯，孙伟，闻邦椿（2008）. 基于EMD分析的慢变转子系统故障诊断方法研究. 《第八届全国转子动力学学术讨论会论文集》.
598. 尤小梅，闻邦椿，孟磊（2008）. 压缩机叶轮动力学可视化分析. 《风机技术》.
599. 王得刚，李朝峰，姚红良，闻邦椿（2008）. 基于车身有限元分析的汽车NVH研究. 《机械与电子》.
600. Fumao Wang, Yijie Cui, He Li, Bangchun Wen, Bisheng Chen (2008). A vibration testing system for a roots blower rotor based on a virtual instrument. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
601. Qingkai Han, Xueyan Zhao, Bangchun Wen (2008). Synchronization motions of a two-link mechanism with an improved OPCL method. Applied Mathematics and Mechanics.DOI
602. Zhihao Jin, Bin Gong, Wen Jin, Bangchun Wen (2008). Analysis of Acoustic Emission Signals from Stainless Steel with Different Wavelet Bases.DOI
603. Hui Ma, Tao Yu, Qingkai Han, Yimin Zhang, Bangchun Wen, Chen Xuelian (2008). Time–frequency features of two types of coupled rub-impact faults in rotor systems. Journal of Sound and Vibration.DOI
604. Bangchun Wen (2008). Recent development of vibration utilization engineering. Frontiers of Mechanical Engineering in China.DOI
605. Bangchun Wen (2008). RESEARCH ON ROTOR DYNAMICS WITH SUDDEN CHANGE OF MASS AND EXCITATION MAGNITUDE. Zhendong yu chongji.
606. Bangchun Wen (2008). Study of Car’s NVH Performance Based on Finite Element Analysis of Car-body. Machinery & Electronics.
607. Bangchun Wen (2008). Study on seismic response of buried pipeline in liquefied soil. Dizhen gongcheng yu gongcheng zhendong.
608. Yuegang Luo, Songhe Zhang, Xiaodong Liu, Bangchun Wen (2008). Integrated Genetic Neural Networks and Its Application in Fault Diagnosis. International Conference on Natural Computation (ICNC).DOI
609. Bangchun Wen (2008). ANALYSIS OF NONLINEAR DYNAMIC CHARACTERISTICS OF COMMONLY SUPPORTED FLUID CONVEYING PIPE. Zhendong yu chongji.
610. Bangchun Wen (2008). Frequency-based capture control on revertible dual-motor-driven vibration system. Chinese journal of construction machinery.
611. Bangchun Wen (2008). Study on Parameterized Simulation Process for Complicated Mechanism Design. Journal of Northeastern University.
612. Bangchun Wen (2008). Study and Application of Generalized Quality Evaluation of Products by Combination Weights and Fuzzy Matter Element. Journal of Northeastern University.
613. Wei Sun, Qingkai Han, Xiaopeng Li, Bangchun Wen (2008). Research on Parametric Simulation Technology Based on Complicated Mechanism Design.DOI
614. Bangchun Wen (2008). PREDICTING CHAOTIC MOTION OF A TWO END-FIXED FLUID CONVEYING PIPE. Zhendong yu chongji.
615. Bangchun Wen (2008). Some thinking on the developing strategy of machinery science. Hebei ke-ji daxue xuebao.
616. Bangchun Wen (2008). ROTOR DYNAMICS WITH SUDDEN CHANGE OF STIFFNESS AND DAMPING. Zhendong yu chongji.
617. Bangchun Wen (2008). Design and dynamics analysis of a new type of vibration pile driver and drawer. Machinery Design and Manufacture.
618. Bangchun Wen (2008). Simulation and experiment study for the dynamic characteristics of automobile engine hydraulic mount based on the key chart theory. Machinery Design and Manufacture.
619. Bangchun Wen (2008). Study on the Key Techniques of Finite Element Preprocessing Based on HyperMesh. Machine Tool & Hydraulics.
620. Bangchun Wen (2008). 7D Planning of Product Design and 1+3+X Integrated Design Method Based on System Engineering. Journal of Northeastern University.
621. Bangchun Wen (2008). Visualized optimization design method on vibratory machinery. Chinese journal of construction machinery.
622. Bangchun Wen (2008). Study on the Feature Recognition of Acoustic Emission Signals from the Rubbing Fault of Rotor.
623. Bangchun Wen (2008). Parameter Contribution Analysis of Vibration Transfer Paths Based on Sensitivity. Chinese Journal of Mechanical Engineering.
624. Bangchun Wen (2008). Application of TRIZ to Innovative Design of Rolling Piston Type Rotary Compressor. Machinery & Electronics.
625. Bangchun Wen (2008). Research on Visual Simulation Technology Based on Manufacturing System. Modular Machine Tool & Automatic Manufacturing Technique.
626. Bangchun Wen (2008). Intelligent Optimization Design for Up-to-Date Machine Products and Its Application. Journal of Northeastern University.
627. Bangchun Wen (2008). Functional optimization design on rolling rotors compressor. Chinese journal of construction machinery.
628. Bangchun Wen (2008). Numerical simulation and analysis on crankshaft systems. Chinese journal of construction machinery.
629. Bangchun Wen (2008). Analysis of non-stationary vibrations of a high pressure boiler pump. Machinery Design and Manufacture.
630. Bangchun Wen (2008). BIFURCATION AND CHAOTIC RESPONSE OF RESTRAINED CANTILEVER PIPE WITH CONVEYED FLUID. Zhendong yu chongji.
631. Bangchun Wen (2008). Random response analysis of vibration transfer path systems with uncertain paths. Jisuan lixue xuebao.
632. Bangchun Wen (2008). Numerical Simulation and Experimental Research on Pedestal Looseness of a Rotor. Machinery & Electronics.
633. 李强，高耀东，闻邦椿，韩清凯（2007）. 40t钢水包倾翻特性的有限元分析. 《东北大学学报(自然科学版)》.
634. 张义民，宿苏英，李鹤，闻邦椿（2007）. 随机连续梁弯曲振动系统的频率可靠性分析. 《应用力学学报》.
635. 姚红良，王月，李小彭，闻邦椿（2007）. 耦合故障转子系统中裂纹信息的诊断. 《应用力学学报》.
636. 龚斌，金志浩，齐辉，闻邦椿（2007）. 无须测量声速的声发射源定位方法研究. 《仪器仪表学报》.DOI
637. 闻邦椿（2007）. “振动利用工程”学科近期的发展. 《振动工程学报》.
638. 于涛，韩清凯，李善达，闻邦椿，张竹青（2007）. 双悬臂转子系统动力学特性及不平衡响应分析. 《振动、测试与诊断》.
639. 李朝峰，刘杰，毛居全，闻邦椿（2007）. 大型复杂机械节点导入建模及有限元分析. 《农业机械学报》.
640. 张义民，刘巧伶，闻邦椿（2007）. 旋转机械系统碰摩故障的失效灵敏度研究. 《振动工程学报》.
641. 包日东，闻邦椿（2007）. 分析两端扭转弹簧约束下简支输流管道的动力特性. 《动力学与控制学报》.
642. 孙伟，刘杰，李小彭，闻邦椿（2007）. 机械产品设计质量评价及评价系统的开发. 《机械设计》.
643. 韩清凯，韩磊，闻邦椿（2007）. 各向异性支承的分布质量轴系的稳定性分析. 《第十一届全国非线性振动学术会议暨第八届全国非线性动力学和运动稳定性学术会议》.
644. 闻邦椿（2007）. 非线性振动的工程应用. 《第十一届全国非线性振动学术会议暨第八届全国非线性动力学和运动稳定性学术会议论文集》.
645. 张义民，贺向东，刘巧伶，闻邦椿（2007）. 任意分布参数的梁结构刚度可靠性灵敏度分析. 《计算力学学报》.
646. 贺向东，张义民，刘巧伶，闻邦椿（2007）. 非正态分布参数的梁结构的刚度可靠性稳健设计. 《固体力学学报》.
647. 贺向东，张义民，闻邦椿（2007）. 不完全概率信息的压杆稳定可靠性鲁棒设计. 《航空动力学报》.
648. 罗跃纲，闻邦椿（2007）. 双跨转子系统裂纹-松动耦合故障的非线性响应. 《航空动力学报》.
649. 包日东，闻邦椿（2007）. 分析弹性支承输流管道的失稳临界流速. 《力学与实践》.
650. 张楠，侯晓林，刘树英，闻邦椿（2007）. 基于虚拟样机技术的节肢振动筛动力学仿真. 《机械与电子》.
651. 张楠，王磊，闻邦椿（2007）. 基于FEM的节肢振动筛动力学特性分析. 《机械制造》.
652. 闻邦椿，贺向东 张义民 薛玉春 闻邦椿（2007）. 压杆稳定可靠性优化设计. 《中国工程科学》, Vol. 9, No. 5.下载原文
653. Yunpeng Ren, Chongshao Lu, Qingkai Han, Tianxia Zhang, Bangchun Wen (2007). Simulated comparison on kinematics properties of two typical mechanisms of forging manipulator. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
654. Qingkai Han, Li Wang, Yunpeng Ren, Tianxia Zhang, Bangchun Wen (2007). A CAN bus based control system for a joint modular robot. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
655. Li Wang, Qingkai Han, Mo Zhang, Tianxia Zhang, Bangchun Wen (2007). An embedded intelligent monitoring system for rotating machiney vibrations. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
656. Li‐Xin Guo, Ming Zhang, Zhaowen Wang, Yi-Min Zhang, Bangchun Wen, Jinli Li (2007). Influence of anteroposterior shifting of trunk mass centroid on vibrational configuration of human spine. Computers in Biology and Medicine.DOI
657. Chunyu Zhao, Zhaohui Ren, Xiaohong Zhou, Bangchun Wen (2007). The Online Monitoring of the Dynamic Characteristics for an Induction Motor and Gearbox Transmission System.DOI
658. Wen Jin, Changzheng Chen, Zhihao Jin, Bin Gong, Bangchun Wen (2007). An Improved Recognition Approach of Acoustic Emission Sources Based on Matter Element. Springer eBooks.DOI
659. Yuegang Luo, Zhaohui Ren, Hui Ma, Tao Yu, Bangchun Wen (2007). Stability of periodic motion on the rotor-bearing system with coupling faults of crack and rub-impact. Journal of Mechanical Science and Technology.DOI
660. Yimin Zhang, Qiaoling Liu, Bangchun Wen (2007). Reliability sensitivity of multi-degree-of-freedom uncertain nonlinear systems with independent failure modes. Journal of Mechanical Science and Technology.DOI
661. He Li, Shuying Liu, Feng Wen, Bangchun Wen (2007). Study on dynamic of giant magnetostrictive material transducer with spring of nonlinear stiffness. Journal of Mechanical Science and Technology.DOI
662. Chunyu Zhao, Qinglei Chi, Lei Wang, Bangchun Wen (2007). A Model Predictive Control of a Grain Dryer with Four Stages Based on Recurrent Fuzzy Neural Network. Lecture notes in computer science.DOI
663. Bangchun Wen (2007). Generalized Evaluation Based on AHP/Grey Theory for Product Quality. Journal of Northeastern University.
664. He Li, Yimin Zhang, Bangchun Wen, Feng Wen (2007). Gear Wearing Faults Diagnosis Using Order Tracking.DOI
665. Bangchun Wen (2007). ON THE BIFURCATION AND STABILITY OF PERIODIC MOTION OF ROTOR-BEARING SYSTEMS WITH CRACK AND PEDESTAL LOOSENESS FAULT. Zhendong yu chongji.
666. Bangchun Wen (2007). STABILITY OF TWO-SPAN ROTOR-BEARING SYSTEM WITH PEDESTAL LOOSENESS FAULT. Zhendong yu chongji.
667. Bangchun Wen (2007). DYNAMIC RESPONSE ANALYSIS OF SUBMARINE FREE SPANNING PIPELINE. Zhendong yu chongji.
668. Bangchun Wen (2007). Recent development of the course "vibratory utilization engineering".
669. Qingkai Han, Li Wang, Hongliang Yao, Bangchun Wen (2007). Simulation and Experiment Analyses on Resonance for a Rotor System With Elastic Supports.DOI
670. Bangchun Wen (2007). Nonlinear responses of two-span rotor-bearing system with coupling faults of crack and pedestal looseness. Journal of Aerospace Power.
671. Bangchun Wen (2007). Effects of Exciter Parameters on Self-Synchronous Vibration System. Journal of Northeastern University.
672. Bangchun Wen (2007). Stable Reliability Sensitivity Design of Compressive Bar With Non-Normal Distribution Parameters. Journal of Astronautics.
673. Bangchun Wen (2007). Matter-element Analysis Method of Multiple Fault Diagnosis for Gas Turbines. Proceedings of the CSEE.
674. Bangchun Wen (2007). Design quality evaluation of mechanical products and development research of evaluation system. Journal of Machine Design.
675. Xiaopeng Li, Hui Ma, Guiqiu Song, Bangchun Wen (2007). Research on Coupling Faults With Oil-Film Instability and Bearing Rub-Impact Based on Reassigned Wavelet Scalogram.DOI
676. Yuegang Luo, Songhe Zhang, Feng Wen, Bangchun Wen (2007). Bifurcation and Chaos Behavior of Rotor-Bearing System With Crack and Pedestal Looseness Faults.DOI
677. Bangchun Wen (2007). Reliability-robust design of compressive bar under incomplete probability information. Journal of Aerospace Power.
678. Bangchun Wen (2007). Reliability-based robust design of compressive bar. Structure & Environment Engineering.
679. Bangchun Wen (2007). Parameterized design of parallel movement machine tools based on SolidWorks. Journal of Machine Design.
680. Bangchun Wen (2007). Differential Quadrature Method to Analyze Stability of Elastically-Supported Fluid Conveying Pipelines. Journal of Northeastern University.
681. Bangchun Wen (2007). Study on Visual Optimization Design for Modern Machinery. Journal of Northeastern University.
682. Bangchun Wen (2007). Vibration analysis of a self-synchronization system with dual rotors.
683. Bangchun Wen (2007). Influence of Technical Innovation on Industrial Revolution from Vibration Utilization Development. Modern Manufacturing Technology and Equipment.
684. Bangchun Wen (2007). Design of Reliability Sensitivity for Automobile Back-Axle Housing With Non-Normal Distribution Parameters. Mie of China.
685. 陈宏，张晓伟，宋雪萍，闻邦椿（2006）. 考虑密封的悬臂转子系统的裂纹故障分析. 《应用力学学报》.
686. 张义民，闻邦椿（2006）. 自分汽车可靠性设计. 《机械工业标准化与质量》.
687. 包日东，刘刚，龚斌，闻邦椿（2006）. 气液两相管流水力瞬变的数值计算及实验研究. 《应用力学学报》.
688. 鲍文博，闻邦椿（2006）. 一类强非线性振动系统的改进能量解析法. 《工程力学》.
689. 徐玉秀，胡海岩，闻邦椿（2006）. 杜芬方程的1/3纯亚谐解及过渡过程的分形特征研究. 《应用数学和力学》.
690. 罗跃纲，杜元虎，闻邦椿（2006）. 非线性弹性转子系统动力特性分析. 《机械设计与研究》.
691. 张义民，刘巧伶，李鹤，闻邦椿（2006）. 转子-定子系统碰摩可靠性灵敏度研究. 《航空动力学报》.
692. 姚红良，李鹤，李小彭，闻邦椿（2006）. 裂纹碰摩耦合故障转子系统诊断分析. 《振动工程学报》.
693. 吴敬东，刘长春，王宗勇，闻邦椿（2006）. 非对称转子系统的碰摩运动研究. 《振动工程学报》.
694. 宋雪萍，李朝峰，马辉，闻邦椿（2006）. 基于小波分析的旋转机械故障诊断技术及其试验研究. 《中国机械工程》.
695. 袁惠群，吴英祥，李东，闻邦椿（2006）. 滑动轴承-转子-定子系统耦合故障的非线性动力学特性. 《东北大学学报(自然科学版)》.
696. 孙伟，于涛，马辉，闻邦椿（2006）. 基于VB和Matrix VB的振动筛动力学计算系统. 《机械与电子》.
697. 赵春雨，路忠良，姚红良，闻邦椿（2006）. 刚性转子系统的碰摩与油膜非线性动力学耦合. 《东北大学学报(自然科学版)》.
698. 罗跃纲，王培昌，闻邦椿（2006）. 双跨转子-轴承系统裂纹-碰摩故障的非线性响应研究. 《工程力学》.
699. 张靖，闻邦椿（2006）. 支座松动转子系统的振动特性分析. 《机械设计》.
700. 李朝峰，刘杰，纪盛青，王瑾珲，闻邦椿（2006）. 动力学可视化在大型振动机械中的应用. 《机械与电子》.
701. 张义民，贺向东，刘巧伶，闻邦椿（2006）. 任意分布参数的钢板弹簧的可靠性优化设计. 《机械设计》.
702. Yuxiu Xu, Haiyan Hu, Bangchun Wen (2006). 1/3 Pure sub-harmonic solution and fractal characteristic of transient process for Duffing’s equation. Applied Mathematics and Mechanics.DOI
703. Hong Chen, Bangchun Wen, He Li, Xiaowei Zhang (2006). Dynamics analysis of a cracked dual-disk over-hung rotor-bearing system. Frontiers of Mechanical Engineering in China.DOI
704. Tao Yu, Qingkai Han, Zhaoye Qin, Bangchun Wen (2006). Identification of Crack Location and Depth in Rotating Machinery Based on Artificial Neural Network. Lecture notes in computer science.DOI
705. Song Wei-gang, Bangchun Wen, Huijuan Liu (2006). Simulation Research on Dynamics of Belt Conveyor System.DOI
706. Bangchun Wen (2006). Nonlinear Dynamic Coupling of Impact/Rub and Oil Film for a Rigid Rotor in Short Journal Bearings. Journal of Northeastern University.
707. Bangchun Wen (2006). Diagnoses of coupling fault of crack and rub-impact in rotor systems.
708. Bangchun Wen (2006). Unbalance response characteristics of distributed multi-mass rotor system. Machinery Design and Manufacture.
709. Bangchun Wen (2006). Reliability optimization design of steel plate spring with arbitrary distributed parameters. Journal of Machine Design.
710. Qingkai Han, Li Wang, Hongliang Yao, Zhaohui Ren, Bangchun Wen (2006). Dynamic Analysis of a Four-Span Rotor System With Nonlinear Oil-Films.DOI
711. Bangchun Wen (2006). The Application of Kaiser Effect in the Defect Assessment of Pressure Vessels. Nondestructive Testing.
712. Bangchun Wen (2006). Application of Three-in-One Design Criterion in Overall Evaluation of Product Quality. Journal of Northeastern University.
713. Bangchun Wen (2006). Research on visual simulation of automobile gearbox assembling line. Journal of Engineering Design.
714. Bangchun Wen (2006). Stability and reliability optimization of arbitrarily-distributed parameters for compression bars. Chinese journal of construction machinery.
715. Bangchun Wen (2006). Adaptive Fuzzy PID Temperature Control of Flash Dryer. Control Engineering of China.
716. Bangchun Wen (2006). Stable reliability-based sensitivity design of compressive bar. Journal of Engineering Design.
717. Bangchun Wen (2006). FAULT DIAGNOSIS TECHNIQUE OF ROTATING MACHINE BASED ON CHMM. Chinese Journal of Mechanical Engineering.
718. Bangchun Wen (2006). STUDY ON NONLINEAR RESPONSE OF TWO-SPAN ROTOR-BEARING SYSTEM WITH COUPLING FAULTS OF CRACK AND RUB-IMPACT. Engineering Mechanics.
719. Bangchun Wen (2006). Stochastic Response to Impact/Rub Acted on Rotor-Stator Box System in Rotary Machine. Journal of Northeastern University.
720. Bangchun Wen (2006). Image Orientation Recognition Based on Hidden Markov Model. Journal of Northeastern University.
721. Bangchun Wen (2006). Precise Diagnosis of Rotor Rubbing Fault Based on Modal Expansion and Harmonic Decomposition. Journal of Northeastern University.
722. Bangchun Wen (2006). The computation and analysis of the vibration characteristic of the rotor blades for some type low compressor. Machinery Design and Manufacture.
723. Bangchun Wen (2006). MODIFIED ENERGY METHOD FOR A CLASS OF STRONGLY NONLINEAR VIBRATION SYSTEM. Engineering Mechanics.
724. Bangchun Wen (2006). Dynamic Solving System for Vibrating Screen Based on VB and MatrixVB. Machinery & Electronics.
725. 陈宏，李鹤，张晓伟，闻邦椿（2005）. 双盘悬臂裂纹转子-轴承系统的动力学分析. 《振动工程学报》.
726. 朱启兵，刘杰，李允公，闻邦椿（2005）. 基于结构风险最小化原则的奇异值分解降噪研究. 《振动工程学报》.
727. 徐玉秀，钟建军，闻邦椿（2005）. 旋转机械动态特性的分形特征及故障诊断. 《机械工程学报》.
728. 张晓伟，姚红良，李小彭，闻邦椿（2005）. 基于“三化”综合设计方法的振动机械设计. 《机械设计》.
729. 金基铎，邹光胜，闻邦椿（2005）. 参-强激励联合作用下输流管的分岔和混沌行为研究. 《应用力学学报》.
730. 吴敬东，刘长春，朱诚实，闻邦椿（2005）. 非线性转子-机匣系统的分岔行为研究. 《力学与实践》.
731. 陈宏，张晓伟，李小彭，闻邦椿（2005）. 不对称润滑对碰摩转子-轴承系统的动力学影响. 《振动、测试与诊断》.
732. 鲍文博，徐金花，陈四利，闻邦椿（2005）. 动力基础系统非线性力学模型. 《地震工程与工程振动》.
733. 王宗勇，吴敬东，闻邦椿（2005）. 质量慢变转子系统的松动与碰摩故障研究. 《振动工程学报》.
734. Qingpeng Han, Li Wang, Ping Wang, Bangchun Wen (2005). Synthesized quantitative assessment of human mental fatigue with EEG and HRV. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
735. Li Wang, Qingpeng Han, Ping Wang, Bangchun Wen (2005). Wavelet package frequency-band energy ratios of human EEG signals in sleeping. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
736. Yimin Zhang, Xiangdong He, Qiaoling Liu, Bangchun Wen (2005). Robust Reliability Design of Banjo Flange With Arbitrary Distribution Parameters. Journal of Pressure Vessel Technology.DOI
737. Bangchun Wen (2005). Catastrophe in Fault Developing Process of Rotor System. Journal of Northeastern University.
738. Bangchun Wen (2005). Assessment Based on Nonlinear Parameters of EEG α Waves for Human-Body Fatigues. Journal of Northeastern University.
739. Changli Liu, Yimin Zhang, Qing Kai Han, Bangchun Wen (2005). Experimental Research on Nonlinear Vibration Characteristics of Rotor Bearing System With Coupling Fault of Rub-Impact and Oil Whirl.DOI
740. Bangchun Wen (2005). Characteristics of Bending-Torsional Coupled Vibrations of Gear Shafting. Journal of Northeastern University.
741. Huagang Sun, Huiqun Yuan, Bangchun Wen (2005). The Characteristic Experiment Analysis of the Giant Magnetostrictive Actuator.DOI
742. Bangchun Wen (2005). RESEARCH ON THE BIFURCATION BEHAVIORS OF A NONLINEAR ROTOR-BOX SYSTEM. Lixue yu shijian.
743. Bangchun Wen (2005). Numerical Analysis Method for Investigating the Multiple Attractors Phenomenon and its Realization. Journal of Anhui University of Technology.
744. Bangchun Wen (2005). Vibration Characteristic of a Rotor-Bearing System with Pedestal Looseness and Rub-Impact. Mechanical Science and Technology.
745. Bangchun Wen, Luo Yue-gang (2005). Nonlinear Response and Chaos of Two-Span Rotor-Bearing System with Crack Fault. Journal of Northeastern University.
746. Bangchun Wen (2005). Vibration machinery design based on the method of “three-transformation” synthetic design. Journal of Machine Design.
747. 张晓伟，姚红良，陈宏，闻邦椿（2004）. 基于Taylor变换法的转子系统非线性动力学特性. 《东北大学学报(自然科学版)》.
748. 陈宏，宋明凯，张晓伟，闻邦椿（2004）. 不同润滑油黏度对碰摩转子-轴承系统动力学行为的影响. 《东北大学学报(自然科学版)》.
749. 李振平，张金换，金志浩，闻邦椿（2004）. 碰摩转子—轴承系统非线性动力学行为研究. 《航空动力学报》.
750. 邹光胜，金基铎，闻邦椿（2004）. Melnikov方法在输流管混沌运动研究中的应用. 《力学与实践》.
751. 金志浩，王关晴，刘洁，闻邦椿（2004）. 波纹板内流体流动特性的数值模拟. 《水动力学研究与进展A辑》.
752. 张靖，闻邦椿（2004）. 带有两端支座松动故障的转子系统的振动分析. 《应用力学学报》.
753. 刘长利，姚红良，李鹤，闻邦椿（2004）. 碰摩裂纹转子轴承系统的周期运动稳定性及实验研究. 《应用力学学报》.
754. 闻邦椿（2004）. 故障旋转机械非线性动力学的理论与试验. 《科学出版社》.
755. 曹宗杰，闻邦椿，匡震帮（2004）. 智能结构不确定参数系统振动控制及其摄动分析. 《航空学报》.
756. 张义民，付立英，闻邦椿（2004）. 单自由度随机滞回系统的振动响应分析. 《振动工程学报》.
757. 刘长利，姚红良，罗跃纲，闻邦椿（2004）. 松动碰摩转子轴承系统周期运动稳定性研究. 《振动工程学报》.
758. 闻邦椿，张义民 贺向东 刘巧伶 闻邦椿（2004）. 汽车零部件的可靠性稳健优化设计——理论部分. 《中国工程科学》, Vol. 6, No. 3.下载原文
759. 闻邦椿，张义民 刘巧伶 闻邦椿（2004）. 不完全概率信息的车辆常用弹簧的可靠性灵敏度设计. 《中国工程科学》, Vol. 6, No. 1.下载原文
760. 闻邦椿，沈志云 葛昌纯 甘子钊 杨叔子 熊有伦 闻邦椿 宋玉泉 汪耕 刘宝珺 经福谦 朱静 周国治 李依依 王崇愚（2004）. 在我国建设世界上第一条高温超导磁悬浮列车试运行线的建议. 《中国科学院院刊》, Vol. 19, No. 1.下载原文
761. Bangchun Wen (2004). Rub-Impact Analysis of Rotor System with Slow-Varying Mass. Journal of Northeastern University.
762. Bangchun Wen (2004). Transient Transfer Matrix Method for Complicated Rotor Systems with Rub-Impact Fault. Journal of Northeastern University.
763. Bangchun Wen, Yungong Li (2004). Torsional Vibration Characteristics of Gear System with a Cracked Shaft. Journal of Northeastern University.
764. Bangchun Wen (2004). Transient Response of the Starting Rotor System with the Fault of Pedestal Looseness. 《国际设备工程与管理：英文版》.
765. Bangchun Wen (2004). Reliability and Sensitivity Designs of Vehicle Semiaxle with Non-normal Distribution Parameters. Acta Armamentarll The Volume of Tank, Armored Vehicle and Engine.
766. Bangchun Wen (2004). A ROAD NAVIGATION METHOD BASED ON IMAGE LOCAL SINGULAR VALUE VECTOR AND BP NEURAL NETWORK CLASSIFIER. Robot.
767. Bangchun Wen (2004). Identification and Simulation of Systematic Parameters in House of Quality Modeling. Information and Computation.
768. Bangchun Wen (2004). Model of Dryer HOQ Templet Automatic Generation Based on RBF-ANN. Journal of Northeastern University.
769. Bangchun Wen (2004). Taylor Transform Method for Nonlinear Dynamic Characteristics of Rotor System. Journal of Northeastern University.
770. 罗跃纲，曾海泉，李振平，闻邦椿（2003）. 基础松动-碰摩转子系统的混沌特性研究. 《振动工程学报》.
771. 张义民，刘巧伶，闻邦椿（2003）. 质量偏心旋转机械转子-机匣系统碰摩的失效研究. 《振动工程学报》.
772. 刘杰，李永强，李允公，闻邦椿（2003）. 波动时效机理的动力学研究. 《振动利用技术的若干研究与进展——第二届全国“振动利用工程”学术会议论文集》.
773. 李永强，刘杰，郭星辉，闻邦椿（2003）. 大型压力容器波动时效机理的动力学. 《东北大学学报(自然科学版)》.
774. 张义民，刘巧伶，闻邦椿（2003）. 单自由度非线性随机参数振动系统的可靠性灵敏度分析. 《固体力学学报》.
775. 刘长利，张修丽，闻邦椿（2003）. 松动裂纹转子轴承系统周期运动稳定性研究. 《2003大型发电机组振动和转子动力学学术会议》.
776. 张靖，高淑杰，闻邦椿（2003）. 转子-轴承系统松动-碰摩故障研究. 《2003大型发电机组振动和转子动力学学术会议》.
777. 罗跃纲，姚红良，金志浩，闻邦椿（2003）. 非线性刚度转子系统动力学特性的理论分析. 《振动利用技术的若干研究与进展——第二届全国“振动利用工程”学术会议论文集》.
778. 罗跃纲，金志浩，刘长利，闻邦椿（2003）. 带有裂纹的碰摩转子-轴承系统的非线性特性. 《2003大型发电机组振动和转子动力学学术会议》.
779. 李振平，罗跃纲，姚红良，闻邦椿（2003）. 具有裂纹-碰摩耦合故障转子-轴承系统的动力学研究. 《应用力学学报》.
780. 鲍文博，闻邦椿（2003）. 一类强非线性机械基础系统的亚谐振动解析解. 《应用力学学报》.
781. 张义民，刘巧玲，闻邦椿（2003）. 一般实矩阵特征值问题的多维灵敏度分析. 《应用力学学报》.
782. 李鹤，闻邦椿，应怀樵（2003）. 蛙式夯土机的非线性动力学行为分析. 《第二届全国“振动利用工程”学术会议》.
783. 李振平，金志浩，徐培民，闻邦椿（2003）. 含横向裂纹的弹性转子-轴承系统的动力学研究. 《振动工程学报》.
784. 韩清凯，于涛，杜戊，宫照民，闻邦椿（2003）. 六杆并联机器人模态实验与动力学特性分析. 《振动工程学报》.
785. 张义民，刘巧伶，闻邦椿（2003）. 随机连续杆纵向振动系统的频率可靠性分析. 《力学与实践》.
786. 张义民，刘巧伶，闻邦椿（2003）. 非线性随机系统的独立失效模式可靠性灵敏度. 《力学学报》.
787. 李以农，郑玲，闻邦椿（2003）. 螺栓接头非线性模型及其波能耗散. 《振动工程学报》.
788. Y.M. Zhang, Qiaoling Liu, Bangchun Wen (2003). Practical reliability-based design of gear pairs. Mechanism and Machine Theory.DOI
789. Yimin Zhang, Bangchun Wen, Qiaoling Liu (2003). Uncertain Responses of Rotor-Stator Systems with Rubbing. JSME International Journal Series C.DOI
790. Bangchun Wen (2003). The Probability Thick-Layer Screening Method and Its Application. Coal Preparation.DOI
791. Bangchun Wen (2003). Experimental Analysis on Vibration of Rotor System with Oil-Film Instability Fault. Journal of Northeastern University.
792. Bangchun Wen (2003). Experimental Investigation on Nonlinear Vibration Characteristics of Rotor-Bearing System with Rub-Impact Fault. Journal of Northeastern University.
793. Bangchun Wen (2003). On the Pedestal Looseness of Dynamic Oil Film-Rotor System. Journal of Northeastern University.
794. 杨积东，徐培民，闻邦椿（2002）. 裂纹转子分叉、混沌行为研究中的映射延拓综合法. 《应用力学学报》.
795. 袁惠群，王德友，闻邦椿（2002）. 某发动机转子-机匣系统局部碰摩的混沌运动研究. 《工程力学》.
796. 李以农，郑 玲，闻邦椿（2002）. 基于压电阻抗的结构缺陷评价方法的实验研究. 《力学与实践》.
797. 张义民，闻邦椿，刘巧伶（2002）. 转子-机匣系统碰摩的灵敏度研究. 《机械设计》.
798. 杨积东，徐培民，闻邦椿（2002）. 开闭裂纹挠性转子动特性研究. 《振动工程学报》.
799. 严世榕，S.K.Tso，闻邦椿（2002）. 爬墙式机器人安全系统的动力学变结构控制研究. 《机器人》.
800. 杨积东，徐培民，闻邦椿（2002）. 裂纹转子分岔、混沌行为研究. 《固体力学学报》.
801. 李振平，罗跃纲，姚红良，闻邦椿（2002）. 转子系统支承松动的非线性动力学及故障特征. 《东北大学学报(自然科学版)》.
802. 张义民，闻邦椿，刘巧伶（2002）. 碰摩转子系统的灵敏度分析. 《机械设计与研究》.
803. 张义民，闻邦椿（2002）. 具有独立失效模式的多自由度非线性振动系统的可靠性分析. 《航空学报》.
804. 闻邦椿，张义民 贺向东 闻邦椿（2002）. 螺旋管簧的可靠性优化设计. 《中国工程科学》, Vol. 4, No. 5.下载原文
805. Chunyu Zhao, Qingkai Han, Bangchun Wen (2002). Self-organizing fuzzy controller for synchronization of two motor axes. World Congress on Intelligent Control and Automation.DOI
806. Yimin Zhang, Qiaoling Liu, Bangchun Wen (2002). Quasi-Failure Analysis on Resonant Demolition of Random Structural Systems. AIAA Journal.DOI
807. Yimin Zhang, Bangchun Wen, Qiaoling Liu (2002). SENSITIVITY ANALYSIS OF ROTOR–STATOR SYSTEMS WITH RUBBING*. Mechanics of Structures and Machines.DOI
808. Zheng Ling, Bangchun Wen (2002). EXPERIMENTAL RESEARCH ONEVALUATING STRUCTUREDAMAGE WITH PIEZOELECTRICDYNAMIC IMPEDANCE. Lixue yu shijian.
809. 赵春雨，闻邦椿，赵广耀（2001）. 同向回转双机传动振动系统相位差的模糊监督控制. 《振动工程学报》.
810. 何勍，闻邦椿（2001）. 超声塑性加工系统的非线性动力学模型. 《辽宁工业大学学报(自然科学版)》.
811. 严世榕，刘梅，闻邦椿（2001）. 双容器提升系统在加速过程中的动力学控制研究. 《振动工程学报》.
812. 李以农，郑玲，闻邦椿（2001）. 波能耗散的结构阻尼损耗因子度量方法. 《应用力学学报》.
813. 徐培民，杨积东，闻邦椿（2001）. 离散频谱分析中两邻近谱峰参数的识别. 《振动工程学报》.
814. 袁惠群，闻邦椿（2001）. 转子—机匣局部碰摩的分叉与混沌行为分析. 《应用力学学报》.
815. 严世榕，闻邦椿（2001）. 单容器提升系统动力学的变结构控制研究. 《冶金设备》.
816. 曹宗杰，闻邦椿，陈塑寰（2001）. 智能结构振动控制中压电传感器与执行器位置的拓扑优化. 《振动工程学报》.
817. Yimin Zhang, Qiaoling Liu, Bangchun Wen (2001). Dynamic Research of a Nonlinear Stochastic Vibratory Machine. Shock and Vibration.DOI
818. Yimin Zhang, Bangchun Wen, Andrew Y. T. Leung (2001). Reliability Analysis for Rotor Rubbing. Journal of vibration and acoustics.DOI
819. 闻邦椿，李以农，何京力（2000）. 波及波能利用技术的最新发展. 《振动工程学报》.
820. 宋占伟，闻邦椿，于秀敏，诸文农（2000）. 装载机铲装过程电子控制模型研究. 《第一届国际机械工程学术会议论文集》.
821. 李鸿光，闻邦椿（2000）. 具有间隙和振动边界的自激振动系统的非线性振动. 《振动工程学报》.
822. 闻邦椿（2000）. 高等转子动力学 理论技术与应用.
823. 严世榕，闻邦椿（2000）. 摊铺机压实机构的一种动力学模型及其运动分析. 《建筑机械》.
824. 曹宗杰，闻邦椿，徐培民（2000）. 基于SQCE方法对主臂含纵向闭合裂纹塔机结构强度的研究. 《第一届国际机械工程学术会议》.
825. 严世榕，闻邦椿（2000）. 振动压路机跳起现象动力学分析. 《建设机械技术与管理》.
826. 严世榕，闻邦椿（2000）. 沥青混凝土摊铺机压实机构非线性动力学仿真. 《建筑机械化》.
827. 熊万里，闻邦椿，段志善（2000）. 自同步振动及振动同步传动的机电耦合机理. 《振动工程学报》.
828. 熊万里，段志善，闻邦椿（2000）. 用机电耦合模型研究转子系统的非平稳过程. 《应用力学学报》.
829. 严世榕，闻邦椿（2000）. 振动压路机的一种非线性动力学特性研究. 《福州大学学报(自然科学版)》.
830. 严世榕，闻邦椿，宫照民，乐启炽（2000）. 摊铺机压实机构的一种非线性动力学理论研究. 《中国公路学报》.
831. 宫照民，韩清凯，闻邦椿，徐天宁（2000）. 摊铺机振捣器-介质系统的运动规律和动力学特性研究. 《筑路机械与施工机械化》.
832. 李以农，郑玲，闻邦椿（2000）. 利用波动信息识别结构缺陷的研究. 《第一届国际机械工程学术会议论文集》.
833. Hongguang Li, Bangchun Wen, Jianwu Zhang (2000). Asymptotic Method and Numerical Analysis for Self‐Excited Vibration in Rolling Mill with Clearance. Shock and Vibration.DOI
834. Yinong Li, Ling Zheng, Bangchun Wen (2000). Study of Dynamic Characteristics of Slow‐Changing Process. Shock and Vibration.DOI
835. 李鸿光，杨文平，闻邦椿（1999）. 消除初轧机系统自激振动的理论分析. 《力学与实践》.
836. 张义民，闻邦椿（1999）. 非线性随机振动机的动力学研究. 《工程力学》.
837. 严世榕，闻邦椿（1999）. 考虑塑性变形的振动压路机非线性动力学仿真. 《筑路机械与施工机械化》.
838. 严世榕，闻邦椿（1999）. 振动压路机的一种非线性动力学仿真. 《建筑机械》.
839. 严世榕，闻邦椿（1999）. 加速过程箕斗提升设备机电系统动力学分析. 《中国有色金属学报》.
840. 宫照民，韩清凯，闻邦椿（1999）. 物料非线性惯性力对不对称式振动离心机动力学特性的影响. 《矿山机械》.
841. 魏海燕，冯升华，闻邦椿（1999）. 惯性圆锥破碎机物料参振系统动力学分析. 《矿山机械》.
842. 严世榕，闻邦椿，宫照民，徐天宁，孔庆华，陶永生（1999）. 沥青混凝土摊铺机熨平机构的动力学实验研究. 《福州大学学报(自然科学版)》.
843. 马治国，闻邦椿，颜云辉（1999）. 智能结构中压电材料厚度的设计. 《机械设计》.
844. 熊万里，闻邦椿（1999）. 振动机械起动过程中的迟滞共振原因分析. 《力学与实践》.
845. 韩清凯，闻邦椿（1998）. 一种不对称滞回受迫振动系统及其分析. 《振动工程学报》.
846. 张义民，闻邦椿，刘巧伶（1998）. 动力响应灵敏度分析中的长期项消除. 《振动工程学报》.
847. 严世榕，闻邦椿（1998）. 竖井提升钢丝绳容器系统在提升过程中的动力学仿真. 《中国有色金属学报》.
848. 严世榕，闻邦椿（1998）. 竖井提升容器在提升过程中的动力学分析及计算机仿真. 《矿山机械》.
849. 严世榕，闻邦椿（1998）. 矿井提升系统的动力学研究. 《金属矿山》.
850. 严世榕，闻邦椿（1998）. 斜井提升钢丝绳地辊系统的力学分析与优化问题. 《矿山机械》.
851. 韩清凯，刘树英，宫照民，闻邦椿（1998）. 具有非线性惯性力的多自由度机械振动系统的动力学分析和应用. 《矿山机械》.
852. Yimin Zhang, Bangchun Wen, Qiaoling Liu (1998). First passage of uncertain single degree-of-freedom nonlinear oscillators. Computer Methods in Applied Mechanics and Engineering.DOI
853. Bangchun Wen, Yimin Zhang, Qiaoling Liu (1998). Response of Uncertain Nonlinear Vibration Systems with 2D Matrix Functions. Nonlinear Dynamics.DOI
854. 闻邦椿（1997）. 总结经验　精益求精　争创学报优质高交的新水平——祝贺《振动工程学报》创刊十周年. 《振动工程学报》.
855. 闻邦椿，赵春雨，范俭（1997）. 机械系统同步理论的应用与发展. 《振动工程学报》.
856. 文成秀，姚玉玺，闻邦椿，聂义勇（1997）. 动力系统的点映射—胞映射综合法. 《振动工程学报》.
857. Hongyi Liu, Bangchun Wen (1997). Force distribution for the legs of a quadruped walking vehicle. Journal of Robotic Systems.DOI
858. Tianxia Zhang, Bangchun Wen, Fan Jian (1997). Study on Synchronization of Two Eccentric Rotors Driven by Hydraulic Motors in One Vibrating System. Shock and Vibration.DOI
859. 刘树英，袁艺，闻邦椿（1996）. 考虑物料作用力的大倾角振动输送机的动力学分析. 《东北大学学报(自然科学版)》.
860. 文成秀，姚玉玺，闻邦椿（1989）. 用胞变换法分析分段线性系统周期运动稳定性. 《振动工程学报》.
861. 段志善，闻邦椿（1988）. 一种新的时间序列AR模型结构判定方法. 《振动工程学报》.DOI
862. 段志善，闻邦椿（1985）. 蛙式打夯机的非线性动力学分析和偏心转子合理转速的确定. 《工程机械》.
863. 闻邦椿（1975）. 共振运输机与共振筛的动力学特性及改善其工作性能的措施. 《起重运输机械》.
864. 闻邦椿. 机械设计手册 第6版 第4卷. 《机械工业出版社》.

书籍章节

1. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Theory of Vibration Utilization Technology and Equipment Technological Process. Springer eBooks.DOI
2. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Utilization of Wave and Wave Energy. Springer eBooks.DOI
3. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Utilization of Nonlinear Vibration. Springer eBooks.DOI
4. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Linear and Pseudo Linear Vibration. Springer eBooks.DOI
5. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Some Important Results in Vibration and Wave Utilization Engineering Fields. Springer eBooks.DOI
6. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Formation and Development of Vibration Utilization Engineering. Springer eBooks.DOI
7. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Utilization of Vibrating Phenomena and Patterns in Nature and Society. Springer eBooks.DOI
8. Ting Han, Zhanxun Dong, Yajun Li, Xihui Liu, Xinguo Ming, Bangchun Wen, Binshi Xu, Xiangyang Xin, Chengqi Xue, Kejun Zhang, Zhilei Xu, Yanmin Zhang, Xu Jiang (2020). Strengthening the Basic Research of Innovative Design and the Construction of Common Key Technology Platform. Springer tracts in mechanical engineering.DOI
9. Hongliang Yao, Yang Liu, Zhaohui Ren, Bangchun Wen, Chaofeng Li (2015). Research on Dynamic Modeling and Analysis of the Coupled Planetary Gear and Rotor System. Mechanisms and machine science.DOI
10. Hui Ma, Zhiyuan Wu, Xingyu Tai, Chaofeng Li, Bangchun Wen (2015). Nonlinear Behavior Analysis Caused by Blade Tip Rubbing in a Rotor-Disk-Blade System. Mechanisms and machine science.DOI
11. Qingkai Han, Zhiwei Zhang, Changli Liu, Bangchun Wen (2009). Periodic Motion Stability of a Dual-Disk Rotor System with Rub-Impact at Fixed Limiter. Lecture notes in applied and computational mechanics.DOI

书籍

1. Bangchun Wen, XianLi Huang, Yinong Li, Yimin Zhang (2022). Vibration Utilization Engineering. Springer eBooks.DOI