朱洪涛

2026

High-viscosity droplet formation and spreading in piezoelectric jet dispensing: a numerical and experimental study

Applied Thermal Engineering

DOI

2026

Ultra-high-frequency and high-speed piezoelectric inkjet printing via pressure wave phase modulation

The International Journal of Advanced Manufacturing Technology

DOI

2026

Motion analysis and parameter regulation of the needle in a piezoelectric jet dispensing valve: a fluid-structure interaction and multibody dynamics approach

Measurement Science and Technology

DOI

2026

Long-distance piezoelectric drop-on-demand inkjet printing based on multi-waveform superposition

Physics of Fluids

DOI

2026

Micro-mechanisms of abrasive air jet micro-texturing on cast iron

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2026

Towards high-performance abrasive waterjet milling of nickel-based superalloys: current progress, limitations and future research opportunities

Archives of Civil and Mechanical Engineering

DOI

2025

磨料水射流抛光熔石英玻璃的多目标参数优化（英文）

《中国光学(中英文)》

2025

A multiscale thermodynamic modeling approach for controllable laser processing fabrication of superhydrophobic micro-nano structures

Applied Surface Science

DOI

2025

Improving tribological performance of cast iron surfaces with circular array textures machined by abrasive air jet

Surface Topography Metrology and Properties

DOI

2025

A high-performance longitudinal–bending ultrasonic vibration horn: structural innovation and dynamic testing

Ultrasonics

DOI

2025

Wet etching after femtosecond laser machining for efficient fabrication of consistent inverted pyramid microstructures on monocrystalline silicon surfaces

Precision Engineering

DOI

2025

Friction-reducing and wear-resistant micro-textures on cast iron via shape-controlled maskless abrasive air jet machining

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2025

The evolution mechanism of femtosecond laser-induced periodic structure on monocrystalline silicon with scanning rate and the associated material rearrangement process

Materials Science in Semiconductor Processing

DOI

2025

Numerical analysis of ultrahigh velocity impact of micro abrasive particles on C /SiC composites

Composite Structures

DOI

2025

Laser-Based Two-Step Fabrication Method of Near-Damage-Free Controllably Superhydrophobic Antireflection Micronano Structures of Monocrystalline Silicon

Langmuir

DOI

2024

A novel assessment study of surface integrity for nickel-based superalloy milled by abrasive waterjet considering the abrasive embedding

The International Journal of Advanced Manufacturing Technology

DOI

2024

Modeling and optimizing of laser-assisted waterjet process parameters for near-damage-free micromachining of monocrystalline silicon

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2023

A novel quantitative analysis approach for hole surface damage of ceramic matrix composites machined by abrasive waterjet

Journal of Manufacturing Processes

DOI

2023

Array structure of monocrystalline silicon surface processed by femtosecond laser machining assisted with anisotropic chemical etching

Optics & Laser Technology

DOI

2023

Experimental study on the machining performance of nickel-based superalloy GH4169 milled by AWJ

The International Journal of Advanced Manufacturing Technology

DOI

2023

Design and fabrication of new oblique gradient cemented carbide tool material for inhibiting the initiation of thermal crack

International Journal of Refractory Metals and Hard Materials

DOI

2023

High-efficiency abrasive water jet milling of aspheric RB-SiC surface based on BP neural network depth control models

The International Journal of Advanced Manufacturing Technology

DOI

2022

Mechanism analysis and modeling of surface roughness for CeO2 slurry-enhanced grinding BK7 optics

The International Journal of Advanced Manufacturing Technology

DOI

2021

基于材料阳极极化特性的电解磨削液研究

《工具技术》

2021

Hole characteristics and surface damage formation mechanisms of Cf/SiC composites machined by abrasive waterjet

Ceramics International

DOI

2021

Damage study of fiber-reinforced composites drilled by abrasive waterjet —challenges and opportunities

The International Journal of Advanced Manufacturing Technology

DOI

2021

On-machine precision truing of ultrathin arc-shaped diamond wheels for grinding aspherical microstructure arrays

Precision Engineering

DOI

2021

The mechanisms of high-efficiency grinding for micro/meso-structural arrays on ceramic moulds through an innovative wheel truing technology

Ceramics International

DOI

2021

Fabrication of high-aspect-ratio grooves with high surface quality by using femtosecond laser

Industrial Lubrication and Tribology

DOI

2021

The research of tool wear criterion in micro cutting using the elastic recovery ratio of high-strength elastic alloy 3J33B

The International Journal of Advanced Manufacturing Technology

DOI

2021

Material removal mechanisms of ceramics turned by abrasive waterjet (AWJ) using a novel approach

Ceramics International

DOI

2020

磨料水射流切割高强钢材料的去除率实验研究

《工具技术》

2020

微小盲孔动压磨料流体研抛加工区域仿真研究

《工具技术》

2020

Wear patterns and mechanisms of sialon ceramic end-milling tool during high speed machining of nickel-based superalloy

Ceramics International

DOI

2020

Friction and cutting characteristics of micro-textured diamond tools fabricated with femtosecond laser

Tribology International

DOI

2020

Corrigendum to “Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates” [Int. J. Mach. Tool Manufact. 79 (2014) 1–16]

International Journal of Machine Tools and Manufacture

DOI

2020

Evolution of micro/nano-structural arrays on crystalline silicon carbide by femtosecond laser ablation

Materials Science in Semiconductor Processing

DOI

2020

Machinability investigations on high-speed drilling of aluminum reinforced with silicon carbide metal matrix composites

The International Journal of Advanced Manufacturing Technology

DOI

2020

Grinding performance and tribological behavior in solid lubricant assisted grinding of glass-ceramics

Journal of Manufacturing Processes

DOI

2020

Preparation and Application of a Novel Water-Based Viscoelastic Polishing Fluid for Abrasive Flow Machining

Procedia CIRP

DOI

2019

超声振动辅助铣磨加工工艺对Cf/SiC复合材料加工表面质量的影响

《工具技术》

2019

铍青铜微细切削性能研究

《工具技术》

2019

Al2O3基陶瓷刀具干切削淬硬钢H13时的加工表面质量研究

《工具技术》

2019

Determination of the minimum chip thickness and the effect of the plowing depth on the residual stress field in micro-cutting of 18 Ni maraging steel

The International Journal of Advanced Manufacturing Technology

DOI

2019

Influence of novel sintering process on the densification and microstructures of ceramic composite materials

Ceramics International

DOI

2019

Nanomechanical characterization of RB-SiC ceramics based on nanoindentation and modelling of the ground surface roughness

Ceramics International

DOI

2019

Removal mechanism and surface quality of crystal semiconductor materials in scratching tests with Berkovich indenter

Materials Science in Semiconductor Processing

DOI

2019

Fabrication of TiC-TiB 2 composite ceramic tool and its cutting performance in turning austenitic stainless steel

Advances in Applied Ceramics Structural Functional and Bioceramics

DOI

2019

Estimation of tool life and cutting burr in high speed milling of the compacted graphite iron by DE based adaptive neuro-fuzzy inference system

Mechanical sciences

DOI

2019

On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel

The International Journal of Advanced Manufacturing Technology

DOI

2019

Investigation on residual scratch depth and material removal rate of scratching machining single crystal silicon with Berkovich indenter

Materials Science in Semiconductor Processing

DOI

2019

Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material

International Journal of Mechanical Sciences

DOI

2019

Effect of Ni on mechanical behavior of Al2O3/(W,Ti)C ceramic tool materials at ambient and elevated temperatures

Materials Research Express

DOI

2019

Investigation on chip formation and surface integrity in micro end milling of maraging steel

The International Journal of Advanced Manufacturing Technology

DOI

2018

Dynamic response of ceramic material subjected to impact of hard particle

Materials Research Express

DOI

2018

Meshfree analysis on dynamic behavior of hard brittle material in abrasive flow machining

The International Journal of Advanced Manufacturing Technology

DOI

2018

A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel

The International Journal of Advanced Manufacturing Technology

DOI

2018

Micromachining of 4H-SiC using femtosecond laser

Ceramics International

DOI

2018

Numerical study on flow characteristics and impact erosion in ultrasonic assisted waterjet machining

The International Journal of Advanced Manufacturing Technology

DOI

2018

Material removal of single crystal 4H-SiC wafers in hybrid laser-waterjet micromachining process

Materials Science in Semiconductor Processing

DOI

2018

Investigation on flow field of ultrasonic-assisted abrasive waterjet using CFD with discrete phase model

The International Journal of Advanced Manufacturing Technology

DOI

2017

An experimental investigation on laser assisted waterjet micro-milling of silicon nitride ceramics

Ceramics International

DOI

2017

Experimental study of surface integrity and fatigue life in the face milling of inconel 718

Frontiers of Mechanical Engineering

DOI

2017

Investigation on critical crack-free cutting depth for single crystal silicon slicing with fixed abrasive wire saw based on the scratching machining experiments

Materials Science in Semiconductor Processing

DOI

2017

Investigation on erosion mechanism in ultrasonic assisted abrasive waterjet machining

The International Journal of Advanced Manufacturing Technology

DOI

2017

A novel technique for dressing metal-bonded diamond grinding wheel with abrasive waterjet and touch truing

The International Journal of Advanced Manufacturing Technology

DOI

2017

Investigation and modelling of hybrid laser-waterjet micromachining of single crystal SiC wafers using response surface methodology

Materials Science in Semiconductor Processing

DOI

2017

Controlled material removal mode and depth of micro cracks in precision grinding of fused silica – A theoretical model and experimental verification

Ceramics International

DOI

2017

Elastic stress field model and micro-crack evolution for isotropic brittle materials during single grit scratching

Ceramics International

DOI

2017

Experimental study on pulsation behavior of the ultrasonic vibration-assisted abrasive waterjet

The International Journal of Advanced Manufacturing Technology

DOI

2016

石英玻璃的热辅助高效塑性域干磨削

《光学精密工程》

2016

Investigation on Material Response to Ultrahigh Velocity Impact on Ceramics by Micro Particle

Tribology Letters

DOI

2016

Crack-free ductile mode grinding of fused silica under controllable dry grinding conditions

International Journal of Machine Tools and Manufacture

DOI

2016

An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining

Precision Engineering

DOI

2016

A 3D simulation of the fluid field at the jet impinging zone in ultrasonic-assisted abrasive waterjet polishing

The International Journal of Advanced Manufacturing Technology

DOI

2016

Radial-mode abrasive waterjet turning of short carbon–fiber-reinforced plastics

Machining Science and Technology

DOI

2016

Prediction model of depth of penetration for alumina ceramics turned by abrasive waterjet—finite element method and experimental study

The International Journal of Advanced Manufacturing Technology

DOI

2015

Cutting performance and life prediction of an Al2O3/TiC micro–nano-composite ceramic tool when machining austenitic stainless steel

Ceramics International

DOI

2015

FEM analysis on the abrasive erosion process in ultrasonic-assisted abrasive waterjet machining

The International Journal of Advanced Manufacturing Technology

DOI

2015

A research on ultrasonic-assisted abrasive waterjet polishing of hard-brittle materials

The International Journal of Advanced Manufacturing Technology

DOI

2014

Effects of metal phases and carbides on the microstructure and mechanical properties of Ti(C,N)-based cermets cutting tool materials

Materials Science and Engineering A

DOI

2014

Dressing of diamond grinding wheels by abrasive water jet for freeform optical surface grinding

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE

DOI

2014

A new method to evaluate the machinability of difficult-to-cut materials

The International Journal of Advanced Manufacturing Technology

DOI

2014

Effects of sintering processes on the mechanical properties and microstructure of Ti(C,N)-based cermet cutting tool materials

International Journal of Refractory Metals and Hard Materials

DOI

2014

Microstructure and mechanical properties of hot pressed TiB2–SiC composite ceramic tool materials at room and elevated temperatures

Materials Science and Engineering A

DOI

2014

Optimization of machining parameters in the abrasive waterjet turning of alumina ceramic based on the response surface methodology

The International Journal of Advanced Manufacturing Technology

DOI

2014

Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken design

Ceramics International

DOI

2014

Heating and material removal process in hybrid laser-waterjet ablation of silicon substrates

International Journal of Machine Tools and Manufacture

DOI

2014

STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TiB2MATRIX TOOL MATERIALS

Machining Science and Technology

DOI

2014

Material removal analysis in the radial-mode abrasive waterjet turning of ceramic materials

International Journal of Abrasive Technology

DOI

2013

Numerical simulation ultrahigh waterjet (WJ) flow field with the high-frequency velocity vibration at the nozzle inlet

The International Journal of Advanced Manufacturing Technology

DOI

2013

Dynamic fatigue behavior of Al2O3/TiC micro–nano-composite ceramic tool materials at ambient and high temperatures

Materials Science and Engineering A

DOI

2013

On ultrahigh velocity micro-particle impact on steels – A multiple impact study

Wear

DOI

2013

Effects of particulate metallic phase on microstructure and mechanical properties of carbide reinforced alumina ceramic tool materials

Ceramics International

DOI

2013

Microstructure and mechanical properties of TiB2–SiC ceramic composites by Reactive Hot Pressing

International Journal of Refractory Metals and Hard Materials

DOI

2013

Study on the synthesis and growth mechanisms of the refractory ZrC whiskers

International Journal of Refractory Metals and Hard Materials

DOI

2013

A study on in-situ synthesis of TiB2–SiC ceramic composites by reactive hot pressing

Ceramics International

DOI

2013

On ultrahigh velocity micro-particle impact on steels—A single impact study

Wear

DOI

2013

Dynamic behavior and a modified Johnson–Cook constitutive model of Inconel 718 at high strain rate and elevated temperature

Materials Science and Engineering A

DOI

2013

An investigation into the radial-mode abrasive waterjet turning process on high tensile steels

International Journal of Mechanical Sciences

DOI

2013

High temperature mechanical properties of Al2O3/TiC micro–nano-composite ceramic tool materials

Ceramics International

DOI

2013

Study of the mechanical properties, strengthening and toughening mechanisms of Al2O3/TiC micro-nano-composite ceramic tool material

Materials Science and Engineering A

DOI

2013

In situ synthesis of ZrB2–ZrCx ceramic tool materials toughened by elongated ZrB2 grains

Materials & Design (1980-2015)

DOI

2013

Numerical simulation of multiphase flow field in abrasive waterjet machining

International Journal of Abrasive Technology

DOI

2012

单相Al2O3陶瓷刀具材料的界面分子动力学模拟模型

《工具技术》

2012

三维三相纳米陶瓷刀具材料微观组织的相场法模拟

《工具技术》

2012

Preparation and characterization of Al2O3/TiC micro–nano-composite ceramic tool materials

Ceramics International

DOI

2012

Study on in-situ synthesis of ZrB2 whiskers in ZrB2–ZrC matrix powder for ceramic cutting tools

International Journal of Refractory Metals and Hard Materials

DOI

2012

Three-dimensional simulation of microstructure evolution for three-phase nano-composite ceramic tool materials

Computational Materials Science

DOI

2012

Preparation of in-situ growth TaC whiskers toughening Al2O3 ceramic matrix composite

International Journal of Refractory Metals and Hard Materials

DOI

2012

A study on in situ growth of TaC whiskers in Al2O3 matrix powder for ceramic cutting tools

Materials Research Bulletin

DOI

2012

An investigation of hybrid laser–waterjet ablation of silicon substrates

International Journal of Machine Tools and Manufacture

DOI

2012

Study on the Microstructure and Mechanical Properties of TiB2-Ti(C,N) Composite Ceramic Tool Materials

Advanced materials research

DOI

2011

Crack propagation simulation in microstructure of ceramic tool materials

Computational Materials Science

DOI

2011

Three dimensional simulation of microstructure evolution for ceramic tool materials

Computational Materials Science

DOI

2011

CUTTING PERFORMANCE AND WEAR MECHANISM OF Si3N4-BASED NANOCOMPOSITE CERAMIC CUTTING TOOL IN MACHINING OF CAST IRON

Machining Science and Technology

DOI

2011

An Experimental Study on Rough Ball-End Milling of T10A Steel

Advanced materials research

DOI

2010

高压磨料水射流加工中材料去除机理研究

《金刚石与磨料磨具工程》

2010

A Study on the Abrasive Waterjet Milling Mechanisms of Ceramic Materials

Key engineering materials

DOI

2007

精密磨料水射流加工硬脆材料冲蚀机理及抛光技术研究

《山东大学》

2007

磨料水射流抛光技术的研究现状

《工具技术》

2026

Material Removal Mechanisms and Process-Parameter Effects in Abrasive Water Jet Polishing of SLM 316L Stainless Steel

SSRN Electronic Journal

DOI

2025

Numerical investigation of erosive wear considering surface degradation using coupled CFD-DEM and a bond model

arXiv preprint

2022

Mechanism analysis and modelling of surface roughness for CeO2 slurry assisted grinding of BK7 optics considering both particle size and mass fraction

Research Square

DOI