Zhongliang Shu, Jianling Liu, Tao Zhou, Peng Dong, Chang-Li Ma, Tai-Sen Zuo, Chang-Shu Xiang, Yu Guo, Chao Chen, Kechao Zhou (2026). Size Evolution of Multimodal Nanoprecipitates and Synergistic Strength-Conductivity Mechanisms in LPBF-processed Cu-Cr-Nb Alloys. Materials Science & Engineering: A.DOI
Yuhang Shi, Wanyi Yang, Yi-Di Li, Dan Li, Zhaowen Geng, Xiaolong Ma, Yun-Ping Li, Kechao Zhou, Miao Song (2026). Interface formation and evolution mechanisms in Al/Ti dissimilar material via additive friction stir deposition. Materials Characterization.DOI
Wanyi Yang, Zhaowen Geng, Junjie Li, Peng-Da Niu, Yuhang Shi, Dan Li, Qin Zhang, Jun-Yang He, Rui-di Li, Kechao Zhou, Miao Song (2026). Microcrack Toughening Enabled by Lattice Reorientation with Weak Crystallographic Orientation Correlation. Scripta Materialia.DOI
Dan Li, Yaoqin Gan, Feng Li, Chao Chen, Jianling Liu, Zhaowen Geng, Miao Song, Taomei Zhang, Xiao-Bo Min, Kechao Zhou (2026). The dual role of Mg in LPBF-processed high-strength AlMnScZr alloys: strengthening and thermal softening mechanisms. Virtual and Physical Prototyping.DOI
Zhongliang Shu, Jianling Liu, Peng Pan, Qin Zhang, Peng Dong, Chang-Li Ma, Tai-Sen Zuo, Chao Chen, Kechao Zhou (2026). Remarkable high-temperature softening resistance of a Cu-Cr-Nb alloy by solubilizing Ta in the Cr2Nb Laves phase. Scripta Materialia.DOI
Taomei Zhang, Fengfan Li, Zhongliang Shu, Hui Chen, Dan Li, Chao Chen, Kechao Zhou (2026). Cobalt-mediated mechanical properties in as-deposited Ti alloys: From solid solution to eutectoid strengthening. Materials Science & Engineering: A.DOI
Hui Chen, Taomei Zhang, Zhi-Jie Ke, Shi-Chao Liu, Min Liu, Dan Li, Chao Chen, Kechao Zhou (2026). Comparative study of selective laser melted and spark plasma sintered Ti-6Al-4V with LaB6 addition. Journal of Materials Research and Technology.DOI
Jianling Liu, Dan Li, Yunhe Zhou, Hui-Wen Xiong, Chao Chen, Kechao Zhou (2026). Microstructure refinement in TiC-ZrC-Ni cermets induced by phase separation of carbide solid solution. Ceramics International.DOI
Ziyan Zhang, Yi Gao, Jin-juan Cheng, Dan Xie, Chao-Qiang Liu, Kechao Zhou, Xueping Gan (2026). Sliding wear map and wear mechanisms of Cu-15Ni-8Sn-MoS2 self-lubricating composites under oil lubrication. Wear.DOI
Yi Gao, Ziyan Zhang, Tingting Zhang, Xianwei Zhang, Chao-Qiang Liu, Kechao Zhou, Xueping Gan (2026). Similar tribological behavior of Cu-15Ni-8Sn alloys with different hardness due to sliding wear-induced nanolayer. Wear.DOI
Yixin An, Miao Song, Junyang He, Jiayu Pan, Haikun Xu, Xiaoyong Zhang, Kechao Zhou, Bingfeng Wang (2026). Interfacial Segregation-Driven Machine Learning: Discovery of Synergistic Strength-Ductility-High Resistivity in Titanium Alloys. Acta Materialia.DOI
Xiang Wang, Jinjie Dou, Zejun Deng, Kechao Zhou, Qiuping Wei, Li Ma (2026). Reaction kinetics and mass transfer synergistically enhanced the electrochemical oxidation performance of porous SiC/Ta/BDD electrodes in a flow-through reactor. Journal of Hazardous Materials.DOI
Zhen Cao, Xingtao Zhang, Shuhua Gao, Huiwen Xiong, Lei Zhang, Kechao Zhou (2026). Research progress on corrosion mechanism and evaluation methods of inert anode materials in aluminum electrolysis. Review of Materials Research.DOI
Mengxiong Chen, Huiwen Xiong, Lei Zhang, Jianpeng Zou, Kechao Zhou (2026). Optimizing rheology and suppressing powder–binder separation in highly filled suspension flows: Role of interfacial compatibility and solid loading. Physics of Fluids.DOI
Wentao Hu, Zengkai Jiao, Kaitang Huang, Long Zhang, Changyu Yin, Yangfan Liao, Hongtao Yu, Haiyun Yang, Yonggang Wang, Li Ma, Qiuping Wei, Kechao Zhou (2026). The balance of thermal conductivity and stability of diamond/Cu composites through interfacial design of Cr–CuCr dual coatings. Journal of Materials Research and Technology.DOI
Yang Fu, Decai Ouyang, Mengxiong Chen, Heng Zou, Huiwen Xiong, Xiao Kang, Lei Zhang, Kechao Zhou (2026). Multi-material additive manufacturing of metallic lattices/cermet inert anode: synergy of conductivity and corrosion resistance. Journal of Manufacturing Processes.DOI
Peng Pan, Xu Deng, Yiming Dong, Yufeng Zheng, J A Liu, Zhongliang Shu, Qin Zhang, Chao Chen, Kechao Zhou (2026). Tailoring twin-induced bimodal heterostructures via moderate rotary swaging for enhanced strain hardening in degradable Zinc and its alloys. Scripta Materialia.DOI
Kunjie Wang, Kening Chen, Junyang He, Xiaoyong Zhang, Kechao Zhou (2026). Unexpected uniform TiB precipitation in an as-cast Ti-Al-B alloy enabling simultaneous enhancement of strength and ductility. Materialia.DOI
Xiang Wang, Jinjie Dou, Zejun Deng, Guoling Peng, Kechao Zhou, Qiuping Wei, Li Ma (2026). The pore structure regulation targeting the co-enhanced kinetics and mass transfer for improving electrochemical oxidation performance. Chemical Engineering Journal.DOI
Qianqian Xu, Yimeng He, Xinke Hu, Kangyi Xiao, Peiqiong Zhou, Senfeng Zhao, Kechao Zhou, Dou Zhang, Yan Zhang (2026). Floatable porous BCZT@TPU piezocatalytic gels for water purification and hydrogen evolution. Chemical Communications.DOI
Hao Wu, Haichao Li, Zejun Deng, Jie Wang, Rongkai Ge, Yi-jia, Kechao Zhou, Quiping Wei, Li Ma (2026). High-temperature oxygen plasma etching for enhancing the electrochemical oxidation performance of boron-doped diamond electrodes. Diamond and Related Materials.DOI
Zhan-he LIU, Kechao Zhou, Kaihua Shi, Xiaozan Wu, He Xiao, Chao-qun PENG, Ri-chu WANG, Xiao-feng WANG (2026). Additive manufacturing techniques for WC-Co cemented carbides: Principle, progress, and perspective. Transactions of Nonferrous Metals Society of China.DOI
Yaoqin Gan, Dan Li, Jianling Liu, Junjie Long, Chao Chen, Kechao Zhou (2025). Gradient Structure Formation and Strengthening Mechanisms in Laser-Remelted Er/Zr Micro-alloyed Al-6Ni alloys. Materials Science & Engineering: A.DOI
Wanyi Yang, Hui Sheng, Z. Gen, Yuhang Shi, Peng-Da Niu, Rui-Di Li, Xiao-Long Ma, Yanxia Liu, Gang Zhou, Kechao Zhou, Miao Song (2025). Phase transformation induced by severe gradient shear deformation in an Al0.1CoCrFeNi alloy. Materials Characterization.DOI
Yaoqin Gan, Dan Li, Jianling Liu, Ziwei Yang, Rou Ding, Yiyou Wu, Chao Chen, Kechao Zhou (2025). Mechanical properties and electrical conductivity of heat-resistant eutectic aluminum alloys: A comparative study of Al-Al11Ce3 and Al-Al3Ni eutectics. Materials Science and Technology.DOI
Yu Guo, Huixia Li, Xin Bi, Yicheng Bai, Jianling Liu, Chao Chen, Kechao Zhou (2025). Mechanical and Fatigue Performance of Porous Tantalum Scaffolds with Composite Pore Structures Fabricated via Electron Beam Powder Bed Fusion. Advanced Engineering Materials.DOI
Dan Li, Zhaowen Geng, Chen Hui, Yaoqin Gan, Jiaqi Zhang, Peng Pan, Zhongliang Shu, Xianglong Li, Chao Chen, Jianling Liu, Miao Song, Kechao Zhou (2025). Remarkable Enhancement of Strength and Thermal Stability of an Additively Manufactured Al–Mn–Sc–Zr Alloy by Fe Addition. Journal of Alloys and Compounds.DOI
Zi-Yan Zhang, Yi Gao, Jin-juan Cheng, Xueping Gan, Chao-Qiang Liu, Kechao Zhou (2025). Reduction in Coefficient of Thermal Expansion of Cu‐Based Self‐Lubricating Composites without Decreasing Wear Resistance by the Addition of Ni50Fe. Advanced Engineering Materials.DOI
Di Wu, Yuzhou Xia, Jiahan Song, Wei-Ming Bai, Yao-Rui Ma, Jiyang Yan, Jiang Wang, Mao-Hua Rong, Changrong Zhou, Ligang Zhang, Ke-Chao Zhou, Jiaming Zhu, Bingjie Zhang, Libin Liu, Guang-Hui Rao, Tianlong Zhang (2025). Design of high yield strength stress-induced martensite titanium through cooling-induced martensite strengthening. Scripta Materialia.DOI
Mengxiong Chen, Decai Ouyang, Yang Fu, Heng Zou, Huiwen Xiong, Lei Zhang, Kechao Zhou (2025). A combined plastic shaping method for powder metallurgy complex multi-material structures. Materials Horizons.DOI
周科朝，杨秀烨，安益昕，何俊阳，汪冰峰，张晓泳（2024）. 钛合金高通量实验技术进展综述（英文）. Transactions of Nonferrous Metals Society of China.
Dan Li, Yiyou Wu, Miao Song, Chao Chen, Kechao Zhou (2024). High-throughput synthesis of binary Al–Mn alloys by directed energy deposition with improved accuracy of composition adjustment. Journal of Materials Science.DOI
Zhaowen Geng, Chao Chen, Miao Song, Jinru Luo, Jiaxuan Chen, Rui-di Li, Kechao Zhou (2024). High strength Al0.7CoCrFeNi2.4 hypereutectic high entropy alloy fabricated by laser powder bed fusion via triple-nanoprecipitation. Journal of Materials Science & Technology.DOI
Jiaqi Zhang, Chao Chen, Guohua Wang, Zhaowen Geng, Dan Li, Yi-Ping Wu, Kechao Zhou (2024). Mechanical behaviors of tantalum scaffolds with node optimization fabricated by laser powder bed fusion. International Journal of Refractory Metals and Hard Materials.DOI
Peng Pan, Chao Chen, Guohua Wang, Kao Ning, Zhongliang Shu, Jiaqi Zhang, Taomei Zhang, Dan Li, Luyao Gao, Zhaowen Geng, Li Song, Weimin Zou, Yingzhe Zhang, Jianling Liu, Kechao Zhou (2024). The dependence of Zener-Hollomon parameter on softening behavior and dynamic recrystallization mechanism of a biodegradable Zn-Cu-Mg alloy. International journal of plasticity.DOI
Yi-Ping Wu, Guohua Wang, Taomei Zhang, Dan Li, Jiaqi Zhang, Shijie Liu, Chao Chen, Kechao Zhou (2024). Effect of CH4 on plasma spheroidization of tantalum powder. Powder Technology.DOI
Jinyang Ge, Shuangxi Shi, Xiaodong Zhan, Miao Song, Xiao-Yong Zhang, Kechao Zhou (2024). Advancing fracture toughness in high-strength TC18 Alloy by optimizing the forging process. Materials Science & Engineering: A.DOI
Jiaxuan Chen, Chao-Qiang Liu, Dan Li, Peng-Da Niu, Xiao-Yong Zhang, Xiao-Long Ma, Yunqiang Zhao, Chuansheng Chen, Kechao Zhou, Miao Song (2024). TEM analysis of quasi in-situ formed tensile and fatigue cracks in a dual-phase Ti alloy. Scripta Materialia.DOI
Taomei Zhang, Chao Chen, Rui-di Li, Kechao Zhou (2024). Effect of Cr content on the microstructure and mechanical properties of Ti–Cr alloys manufactured by laser directed energy deposition. Materials Science & Engineering: A.DOI
Zhaowen Geng, Zhongliang Shu, Chao Chen, Jinru Luo, Miao Song, Rui-di Li, Kechao Zhou (2024). Co-existence of nanoprecipitates with solute nitrogen evades the strength-ductility trade-off in metastable high entropy alloy. Materials Research Letters.DOI
Yafang Zhang, Xiao-Jun Zhao, Sai-Nan Liu, Wei Li, Kechao Zhou, Lairong Xiao, Miao Song, Zhen-Yang Cai (2024). Thermal stabilizing and toughening of a dual-phase Nb alloy by tuning stabilizing element C in Nb-BCC. Journal of Materials Science & Technology.DOI
Zhaowen Geng, Jianling Liu, Dan Li, Xianglong Li, Zhongliang Shu, Jiaqi Zhang, Chao Chen, Jinru Luo, Miao Song, Rui-di Li, Kechao Zhou (2024). Achieving high ductility in Fe45Mn35Co10Cr10 metastable high entropy alloy by constructing chemical boundary with stacking fault energy heterogeneity. Materials Science & Engineering: A.DOI
Taomei Zhang, Chao Chen, Rui-di Li, Kechao Zhou (2024). Achieving Strong and Ductile Ti-9Cr alloy with Deformable TiCr2 Nano-particles by Direct Energy Deposition. Materialia.DOI
Jiaqi Zhang, Chao Chen, Dan Li, Zhaowen Geng, Peng Pan, Guo-hua Wang, Kechao Zhou, Jianling Liu (2024). Effect of energy density on microstructure and mechanical properties of Ta−33Ti alloy prepared via laser powder bed fusion. Transactions of Nonferrous Metals Society of China.DOI
Zi-Yan Zhang, Yi Gao, Jin-juan Cheng, Xueping Gan, Chao-Qiang Liu, Kechao Zhou (2024). Microstructures and properties of Cu/50 vol.% MoS2 composites prepared with Cu-coated MoS2 powders and sintered at different temperatures. Tribology International.DOI
Zi-Yan Zhang, Yi Gao, Jin-juan Cheng, Xueping Gan, Chao-Qiang Liu, Kechao Zhou (2024). Development of Cu-15Ni-8Sn/MoS2 self-lubricating composites with desirable mechanical and friction properties. Wear.DOI
Yi Gao, Zi-Yan Zhang, Jin-juan Cheng, Chao-Qiang Liu, Kechao Zhou, Xueping Gan (2024). Low-temperature oxidation behaviors of Cu-15Ni-8Sn alloy in different aging conditions. Materials Characterization.DOI
Chunhong Xiao, Bin Hu, Jinyang Ge, Bin Kong, Deng Luo, Xiao-Yong Zhang, Ke-Chao Zhou (2024). Revealing the Effect of α’ Decomposition on Microstructure Evolution and Mechanical Properties in Ti80 Alloy. Materials.DOI
Huimin Li, Yan Zhang, Mingyang Yan, Yuan Liu, Miao Jia, Shan Xiang, Hanyu Gong, Qianqian Xu, Xi Yuan, Kechao Zhou, Dou Zhang (2024). High-performance triboelectric nanogenerator based on high-permittivity BaZr0.2Ti0.8O3 nanowires with enhanced surface potential. Ceramics International.DOI
Jinyang Ge, Shuangxi Shi, Xiaodong Zhan, Jing Wang, Miao Song, Xiaoyong Zhang, Kechao Zhou (2024). Effect of α configuration on recrystallization uniformity and grain refinement of TC18 alloy during thermomechanical treatment. Journal of Alloys and Compounds.DOI
Heng Zou, Mengxiong Chen, Yang Fu, Huiwen Xiong, Lei Zhang, Kechao Zhou (2024). Microstructure and mechanical properties of complex-shaped 7075 aluminium alloy prepared using modified polyoxymethylene-based feedstock. Transactions of Nonferrous Metals Society of China.DOI
Ruizhi Yu, Zejun Deng, Sharel Peisan E, Lingcong Meng, Run Wang, Yijia Wang, Haichao Li, Xiang Wang, Kechao Zhou, Li Ma, Quiping Wei (2024). Highly specific and sensitive quantification of uric acid in sweat using a dual boron-doped diamond electrode. Sensors and Actuators B Chemical.DOI
Qianqian Xu, Miao Jia, Peiqiong Zhou, Yan Zhang, Wei Guo, Senfeng Zhao, Hanmin Zeng, Jianxun Zhang, Mingyang Yan, Shumiao Jiang, Kechao Zhou, Dou Zhang, Chris Bowen (2024). High‐Performance Ultrasensitive Flexible Piezoelectric Thin Film Sensors via a Cost‐Effective Transfer Strategy. Advanced Functional Materials.DOI
Kechao Zhou, Xiu-ye YANG, Yeong-Guk An, Junyang He, Bingfeng Wang, Xiaoyong Zhang (2024). A review on advances of high-throughput experimental technology for titanium alloys. Transactions of Nonferrous Metals Society of China.DOI
Miao Song, Dingri Zhang, Dan Leng, Jaewon Lee, Ziang Yang, Jiaxuan Chen, Dan Li, Lei Wang, Gang Zhou, Rui Yang, Kechao Zhou (2024). In situ atomic observations of aggregation growth and evolution of penta-twinned gold nanocrystals. Nature Communications.DOI
Guoqiang Shang, Xueping Gan, Xinnan Wang, Jinyang Ge, Chao Li, Zhishou Zhu, Xiaoyong Zhang, Kechao Zhou (2024). Effect of Cooling Rate on α Variant Selection and Microstructure Evolution in TB17 Titanium Alloy. Materials.DOI
Yong He, Huiwen Xiong, Kechao Zhou, Xiao Kang, Lei Zhang (2024). Enhanced thermal insulation and corrosion resistance in Ni-Fe cermet through incorporation of high-entropy spinel oxides. Corrosion Science.DOI
Jinzhu Zou, Miao Song, Xuefan Zhou, Wenchao Chi, Tongxin Wei, Kechao Zhou, Dou Zhang, Shujun J. Zhang (2024). Enhancing piezoelectric coefficient and thermal stability in lead-free piezoceramics: insights at the atomic-scale. Nature Communications.DOI
Xiang Wang, Jinjie Dou, Zejun Deng, Mingchen Gong, Kechao Zhou, Li Ma, Qiuping Wei (2024). Three-dimensional porous SiC/BDD electrode with long-term robustness and enhanced electrochemical degradation performance for refractory organic pollutants. Chemical Engineering Journal.DOI
Zhiyuan Jia, Xueyan Song, Sen Xiang Yang, Xiaoyong Zhang, Kechao Zhou (2024). Developing novel Ti-Nb-Zr-Mo-Sn-O biomedical titanium alloys with high strength and low modulus through high-throughput experiments. Materials Letters.DOI
Fu Yang, Mengxiong Chen, Heng Zou, Huiwen Xiong, Xiao Kang, Lei Zhang, Kechao Zhou (2024). Towards high-density and thick-walled NiFe2O4-based cermet by ceramic injection molding using spherical composite powder. Ceramics International.DOI
Heng Zou, Yi Sun, Mengxiong Chen, Yuan Ying Jiang, Fu Yang, Huiwen Xiong, Lei Zhang, Kechao Zhou (2024). Microstructure and mechanical property of high-density 7075 Al alloy by compression molding of POM-based feedstock. Journal of Materials Research and Technology.DOI
Mengxiong Chen, Zhonghua Yi, Huiwen Xiong, Heng Zou, Xiao Kang, Lei Zhang, Jianpeng Zou, Kechao Zhou (2024). Efficient catalytic debinding feedstock design for material extrusion additive manufacturing of low warpage and high-density titanium alloy. Applied Materials Today.DOI
Yi SUN, Zhonghuai Yi, Ting SHEN, Huiwen Xiong, Xiao Kang, Lei Zhang, Kechao Zhou (2024). Microstructure and mechanical properties of 7075 aluminum alloy prepared by metal fused deposition modeling. Transactions of Nonferrous Metals Society of China.DOI
Yi Sun, Heng Zou, Zhonghuai Yi, Huiwen Xiong, Xiao Kang, Lei Zhang, Kechao Zhou (2024). Material extrusion of high-density SiCp/7075Al composite via a high nitrogen-flowing assisted sintering. Materials Characterization.DOI
Zhonghuai Yi, Ting Shen, Huiwen Xiong, Xiao Kang, Lei Zhang, Kechao Zhou (2024). Strong and densified 3D metal-ceramic composite with strengthened layer structure by material extrusion additive manufacturing. Additive manufacturing.DOI
Ting Shen, Zhonghuai Yi, Huiwen Xiong, Luanluan Jia, Zhiyou Li, Lei Zhang, Kechao Zhou (2024). Large-scale NiFe2O4-based cermets prepared by composite extrusion modelling: From high-qualified composite feedstock to dense sintered microstructure. Ceramics International.DOI
Qianqian Xu, Yong Tao, Zhenxing Wang, Hanmin Zeng, Junxiao Yang, Yuan Li, Senfeng Zhao, Peiyuan Tang, Jianxun Zhang, Mingyang Yan, Qingping Wang, Kechao Zhou, Dou Zhang, Hui Jun Xie, Yan Zhang, Chris Bowen (2024). Highly Flexible, High‐Performance, and Stretchable Piezoelectric Sensor Based on a Hierarchical Droplet‐Shaped Ceramics with Enhanced Damage Tolerance. Advanced Materials.DOI
Fu Yang, Heng Zou, Xiao Kang, Huiwen Xiong, Lei Zhang, Kechao Zhou (2024). Plastic shaping of NiFe 2 O 4 ‐based cermets using granular feedstock: microstructure and mechanical properties. International Journal of Applied Ceramic Technology.DOI
Mengxiong Chen, Huiwen Xiong, Yang Fu, Heng Zou, Xiao Kang, Lei Zhang, Kechao Zhou (2024). Fabrication of large cross-section Ti–6Al–4V alloy using EBS-modified POM-based feedstock. Powder Technology.DOI
郭瑜，陈超，潘彦明，汪强兵，吴琛，周科朝（2023）. 孔结构对电子束粉末床熔融多孔钽支架变形行为及力学性能的影响（英文）. Transactions of Nonferrous Metals Society of China.
Yu Guo, Chao Chen, Yanfei Pan, Qiang-bing Wang, Chen Wu, Kechao Zhou (2023). Influence of pore structures on deformation behavior and mechanical properties of porous tantalum scaffolds fabricated by electron beam powder bed fusion. Transactions of Nonferrous Metals Society of China.DOI
Jing-Bo Liu, De-Kuan Wang, Bo Liu, Ning Li, Luxin Liang, Chao Chen, Kechao Zhou, Ian Baker, Hong Wu (2023). Microstructural evolution, mechanical properties and corrosion mechanisms of additively manufactured biodegradable Zn-Cu alloys. Journal of Materials Science & Technology.DOI
Li-Guo Xu, Shuangxi Shi, Bin Kong, Deng Luo, Xiao-yong Zhang, Ke-Chao Zhou (2023). Static Globularization Behavior and Artificial Neural Network Modeling during Post-Annealing of Wedge-Shaped Hot-Rolled Ti-55511 Alloy. Materials.DOI
Yanjing Su, Ming Yang, Wei-Li Zhu, Ke-Chao Zhou, D. Xue, Hong Wang, Jianxin Xie (2023). Development of Key Technologies for Intelligent Research and Development of New Materials. Chinese Journal of Engineering Science.DOI
Zeng-Kai Jiao, Long Zhang, Ze-Jun Deng, Haichao Li, Xiang Wang, Yuan Gang, Yi-Jia Wang, Li Ma, Ke-Chao Zhou, Qiu-Ping Wei (2023). Highly conductive diamond skeleton reinforced Cu-matrix composites for high-efficiency thermal management. Applications of Surface Science.DOI
Shiyan Zhu, Chengpeng Zhu, Deng Luo, Xiao-yong Zhang, Ke-Chao Zhou (2023). Development of a Low-Density and High-Strength Titanium Alloy. Metals.DOI
Di Wu, Mengyuan Hao, Tianlong Zhang, Zhen Wang, Jiang Wang, Guang-Hui Rao, Li-Gang Zhang, Chaoyi Ding, Ke-Chao Zhou, Li-Bin Liu, Dong Wang, Yun-Zhi Wang (2023). Heterostructures Enhance Simultaneously Strength and Ductility of a Commercial Titanium Alloy. Acta Materialia.DOI
Jin Ge, X. Zhan, Chao Li, Xiao-yong Zhang, Ke-Chao Zhou (2023). Dynamic Spheroidization Mechanism and Its Orientation Dependence of Ti-6Al-2Mo-2V-1Fe Alloy during Subtransus Hot Deformation. Materials.DOI
Y. An, Ke-Chao Zhou, Shaohong Wei, Shiyan Zhu, Yechen Deng, Yangzhihong Xiao, Xiao-yong Zhang, Yubin Ke, Bing-Feng Wang (2023). High throughput construction for the deformation mechanism diagram and dynamic recrystallization of a bimodal‐sized particle‐reinforced Ti‐2.5Zr‐2Al‐1(Si,C) titanium alloy. Materials Genome Engineering Advances.DOI
Jingjing Ye, Hanyu Gong, Yan Zhang, Qianqian Xu, Xiang Zhou, Mingyang Yan, Di Zhai, Kechao Zhou, Dou Zhang, Chris Bowen (2023). Piezoelectric ceramics with hierarchical macro- and micro-pore channels for sensing applications. Additive manufacturing.DOI
Hui MING, Chengpeng Zhu, Xueyan Song, Xiaoyong Zhang, Kechao Zhou (2023). Microstructure evolution and mechanical properties of Ti-1023 alloy during β slow cooling process. Transactions of Nonferrous Metals Society of China.DOI
Yong He, Lei Zhang, Huiwen Xiong, Kechao Zhou, Xiao Kang (2023). The selective site occupation, structural and thermal stability of high entropy (CoCrFeMnNi)3O4 spinel. Journal of Alloys and Compounds.DOI
Wanlin Yang, Zejun Deng, Libin Liu, Kechao Zhou, Sharel Peisan E, Lingcong Meng, Li Ma, Qiuping Wei (2023). Co-generation of hydroxyl and sulfate radicals via homogeneous and heterogeneous bi-catalysis with the EO-PS-EF tri-coupling system for efficient removal of refractory organic pollutants. Water Research.DOI
Mengxiong Chen, Huiwen Xiong, Lei Zhang, Xiao Kang, Zhiyou Li, Kechao Zhou (2023). Complex-shaped TiC/Ti(C,N)-based cermet prepared via rheological press molding using highly-filled granular feedstock. International Journal of Refractory Metals and Hard Materials.DOI
Jingbo Liu, Luxin Liang, Бо Лю, Qingge Wang, Chao Chen, Kechao Zhou, Ning Li, Hong Peng Wu (2023). Microstructure and mechanical properties of biodegradable Zn-2Cu-0.1Ti alloy for orthopedic applications. Materials Letters.DOI
Jun He, Yanwei Zhang, Kechao Zhou, Haitang Yang, Heng Luo, Yang Li (2023). A hierarchical SiCnw@SiC aerogel decorated with Ni-capped carbon nanotubes toward high-performance electromagnetic wave absorber. Results in Physics.DOI
C.M. Liu, Zong-Yu Xie, Xiaoyong Zhang, Hong-ge YAN, Kechao Zhou, Min Jung Song (2023). Mechanical properties and deformation behaviors of Ti-5Al-5Mo-1Fe-1Cr alloy with duplex and single-phase microstructures. Transactions of Nonferrous Metals Society of China.DOI
Yu Xiang Guo, Chao Chen, Weiwei He, Yuankui Cao, Hongtao Xing, Hang Fang, Chen Wu, Kechao Zhou (2023). Compressive fatigue behavior of graded tantalum scaffolds produced by electron beam powder bed fusion. Journal of Materials Research and Technology.DOI
Ziwei Yang, Chao Chen, Dan Li, Yiyou Wu, Zhaowen Geng, Vladimir Gennadievich Konakov, Kechao Zhou (2023). An additively manufactured heat-resistant Al-Ce-Sc-Zr alloy: Microstructure, mechanical properties and thermal stability. Materials Science and Engineering A.DOI
Feng Li, Zhicheng Li, Chenglu Tang, Lijun Zhang, Qiyang Tan, Chao Chen, Mingxing Zhang, Kechao Zhou (2023). Design high-strength Al–Mg–Si alloy fabricated by laser powder bed fusion: Cracking suppression and strengthening mechanism. Materials Science and Engineering A.DOI
Dan Li, Yiyou Wu, Zhaowen Geng, Jiaqi Zhang, Chao Chen, Xiaochun Liu, Yang Liu, Kechao Zhou (2023). High strength Al−Mg−Sc−Zr alloy with heterogeneous grain structure and intragranular precipitation produced by laser powder bed fusion. Journal of Alloys and Compounds.DOI
Wei Chen, Qi-feng Li, Li-Bo Zhou, W. Qiu, Yan-Jie Ren, Cong Li, Jian Chen, Yongcheng Lin, Ke-Chao Zhou (2022). Oxidation mechanism of a near β-Ti alloy. Materials & Design.DOI
Zeng-Kai Jiao, Hui-jun Kang, Bo Zhou, Aolong Kang, Xi Wang, Haichao Li, Zhi-ming Yu, Li Ma, Ke-Chao Zhou, Qiu-Ping Wei (2022). Research progress of diamond/aluminum composite interface design. Functional Diamond.DOI
Chao-Qiang Liu, Xingye Hu, Lin Qi, Houwen Chen, Zhiqiao Li, Xiao-yong Zhang, Hongge Yan, Ke-Chao Zhou, M. Song, Yun-Zhi Wang, J. Nie (2022). Unusual precipitation induced by solute segregation in coherent twin boundary in titanium alloys. Acta Materialia.DOI
Ruitong Zhu, Zihua Zhao, Jun Cao, Haichao Li, Li Ma, Kechao Zhou, Zhiming Yu, Qiuping Wei (2022). Effect of Pt-Ni deposition sequence on the bimetal-modified boron-doped diamond on catalytic performance for glucose oxidation in neutral media. Journal of Electroanalytical Chemistry.DOI
Hao Zhang, Bingqiang Wei, Xiaoqin Ou, Song Ni, Kechao Zhou, Min Jung Song (2022). Dislocation induced FCC twinning at the HCP/FCC interfaces in a deformed Ti-5at.%Al alloy: Experiments and simulations. Journal of Physics and Chemistry of Solids.DOI
Mingyang Yan, Shengwen Liu, Qianqian Xu, Zhida Xiao, Xi Yuan, Kechao Zhou, Dou Zhang, Qingping Wang, Chris Bowen, Junwen Zhong, Yan Zhang (2022). Enhanced energy harvesting performance in lead-free multi-layer piezoelectric composites with a highly aligned pore structure. Nano Energy.DOI
Jingguang Du, Yaojia Ren, Mingming Zhang, Luxin Liang, Chao Chen, Kechao Zhou, Xinyan Liu, Feng Hua Xu, Ian A. Baker, Hong Peng Wu (2022). Improving the microstructure and mechanical properties of laser powder bed fusion-fabricated tantalum by high laser energy density. Materials Letters.DOI
Xin Hu, Qi Lin, Chaoqiang Liu, Houwen Chen, Xiaoyong Zhang, Hongge Yan, Kechao Zhou, Min Jung Song (2022). Formation mechanism of stacking faults within α′′ martensite in Ti-7 wt%Mo alloy. Journal of Alloys and Compounds.DOI
Yu Xiang Guo, Chao Chen, Qiangbing Wang, Yuankui Cao, Chen Wu, Kechao Zhou (2022). Microstructural evolution and mechanical behavior of additively manufactured tantalum produced by electron beam powder bed fusion. International Journal of Refractory Metals and Hard Materials.DOI
Rou Ding, Junwang Deng, Xiaochun Liu, Yiyou Wu, Zhaowen Geng, Dan Li, Taomei Zhang, Chao Chen, Kechao Zhou (2022). Enhanced mechanical properties and thermal stability in additively manufactured Al-Ni alloy by Sc addition. Journal of Alloys and Compounds.DOI
Yan Chun Zhao, Qianqian Xu, Xuefan Zhou, Mingyang Yan, Hanyu Gong, Xi Yuan, Hang Luo, Kechao Zhou, Dou Zhang, Chris Bowen, Yan Zhang (2022). Enhanced photo-piezo-catalytic properties of Co-doped Ba0.85Ca0.15Zr0.1(Ti1-xCox)0.9 ferroelectric ceramics for dye degradation. Ceramics International.DOI
Xiang Yang Zhou, Kechao Zhou, Dou Zhang, Chris Bowen, Qingping Wang, Junwen Zhong, Yan Zhang (2022). Perspective on Porous Piezoelectric Ceramics to Control Internal Stress. Nanoenergy Advances.DOI
Bensheng Wei, Yan Cherng Lin, Zaiwang Huang, Lan Huang, Kechao Zhou, Longfei Zhang, Lijun Zhang (2022). A novel Re-free Ni-based single-crystal superalloy with enhanced creep resistance and microstructure stability. Acta Materialia.DOI
Hualong Huang, Taomei Zhang, Chao Chen, Seyed Reza Elmi Hosseini, Jiaqi Zhang, Kechao Zhou (2022). Anisotropy in the Tensile Properties of a Selective Laser Melted Ti-5Al-5Mo-5V-1Cr-1Fe Alloy during Aging Treatment. Materials.DOI
Wei Chen, Qifeng Li, Libo Zhou, Cong Li, Wei Qiu, Jian Chen, Yongcheng Lin, Kechao Zhou (2022). Limit of cold deformation in a near β-Ti alloy: role of α′ phases on the failure of β phase during cold rolling. Journal of Materials Research and Technology.DOI
Chengpeng Zhu, Xiaoyong Zhang, Chao Li, Chaoqiang Liu, Kechao Zhou (2022). A strengthening strategy for metastable β titanium alloys: Synergy effect of primary α phase and β phase stability. Materials Science and Engineering A.DOI
Yu Xiang Guo, Chao Chen, Liming Tan, Qiangbing Wang, Yan-ming PAN, Hao Zhu, Kechao Zhou, Chen Wu (2022). The role of pore structures on the fatigue properties of additively manufactured porous tantalum scaffolds produced by electron beam powder bed fusion. Journal of Materials Research and Technology.DOI
Haichao Li, Guoshuai Liu, Bo Zhou, Zejun Deng, Yijia Wang, Li Ma, Zhiming Yu, Kechao Zhou, Qiuping Wei (2022). Periodic porous 3D boron-doped diamond electrode for enhanced perfluorooctanoic acid degradation. Separation and Purification Technology.DOI
Mang Ni, Chao Chen, Ruifeng Xu, Seyed Reza Elmi Hosseini, Ruidi Li, Xiaoyong Zhang, Kechao Zhou (2022). Microstructure and mechanical properties of additive manufactured Inconel 718 alloy strengthened by oxide dispersion with 0.3 wt% Sc addition. Journal of Alloys and Compounds.DOI
Zhaowen Geng, Chao Chen, Ruidi Li, Jinru Luo, Kechao Zhou (2022). Composition inhomogeneity reduces cracking susceptibility in additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy produced by laser powder bed fusion. Additive manufacturing.DOI
Shuangxi Shi, Jinyang Ge, Y.C. Lin, Xiaoyong Zhang, Kechao Zhou (2022). High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in β phase region. Materials Science and Engineering A.DOI
Ruifeng Xu, Zhaowen Geng, Yiyou Wu, Chao Chen, Mang Ni, Dan Li, Taomei Zhang, Hongtao Huang, Feng Liu, Ruidi Li, Kechao Zhou (2022). Microstructure and mechanical properties of in-situ oxide-dispersion-strengthened NiCrFeY alloy produced by laser powder bed fusion. Advanced Powder Materials.DOI
Haichao Li, Zejun Deng, Zengkai Jiao, Ruitong Zhu, Li Ma, Kechao Zhou, Zhiming Yu, Qiuping Wei (2022). Engineering a Au-NPs/Nafion modified nanoporous diamond sensing interface for reliable voltammetric quantification of dopamine in human serum. Chemical Engineering Journal.DOI
Dan Xie, Xueping Gan, Huiwen Xiong, Zhiyou Li, Kechao Zhou (2022). Nano TiC modified Ti(C,N)-based cermets with weakened rim-binder interfaces. Materials Science and Engineering A.DOI
Wanlin Yang, Zejun Deng, Yijia Wang, Li Ma, Kechao Zhou, Libin Liu, Qiuping Wei (2022). Porous boron-doped diamond for efficient electrocatalytic elimination of azo dye Orange G. Separation and Purification Technology.DOI
Zeyu Fu, Aimin Pang, Heng Luo, Kechao Zhou, Haitang Yang (2022). Research progress of ceramic matrix composites for high temperature stealth technology based on multi-scale collaborative design. Journal of Materials Research and Technology.DOI
Zhongwang Wang, Xiaochi Liu, Xuefan Zhou, Yahua Yuan, Kechao Zhou, Dou Zhang, Hang Luo, Jian Ping Sun (2022). Reconfigurable Quasi‐Nonvolatile Memory/Subthermionic FET Functions in Ferroelectric–2D Semiconductor vdW Architectures (Adv. Mater. 15/2022). Advanced Materials.DOI
Haoyang Li, Taomei Zhang, Dan Li, Yiyou Wu, Zhaowen Geng, Chao Chen, Xiaoyong Zhang, Kechao Zhou (2022). Microstructural evolution and mechanical properties of eutectoid Ti–7Ni alloy produced by electron beam powder bed fusion. Intermetallics.DOI
Zengkai Jiao, Songbo Li, Kechao Zhou, Shengyou Bao, Yanglei Yu, Huiyuan Kang, Aolong Kang, Zhiming Yu, Li Ma, Quiping Wei (2022). Application of multi-scale pore regulation for high thermal conductivity foam reinforcements in energy storage. Composites Part A Applied Science and Manufacturing.DOI
Zhongwang Wang, Xiaochi Liu, Xuefan Zhou, Yahua Yuan, Kechao Zhou, Dou Zhang, Hang Luo, Jian Colin Sun (2022). Reconfigurable Quasi‐Nonvolatile Memory/Subthermionic FET Functions in Ferroelectric–2D Semiconductor vdW Architectures. Advanced Materials.DOI
Feng Li, Taomei Zhang, Yiyou Wu, Chao Chen, Kechao Zhou (2022). Microstructure, mechanical properties, and crack formation of aluminum alloy 6063 produced via laser powder bed fusion. Journal of Materials Science.DOI
Y. H. Yang, Qian Lei, P. Zhang, W. Y. Wang, X. K. Zhang, Yun Li, Kechao Zhou, Zhen Li (2022). Stabilization of L12 structured Cr3Cu precipitates in a Cu-4.06Cr-1.25Nb alloy with high high-temperature strength. Materials Research Letters.DOI
Dan Xie, Kepeng Shang, Zhonghuai Yi, Huiwen Xiong, Zhiyou Li, Xueping Gan, Kechao Zhou (2022). Submicron Ti(C,N)-based cermets with improved microstructure using high-energy milled and subsequent heat-treated ultrafine Ti(C,N) powders. Ceramics International.DOI
Taomei Zhang, Hualong Huang, Seyed Reza Elmi Hosseini, Wei Chen, Feng Li, Chao Chen, Kechao Zhou (2022). Obtaining heterogeneous α laths in selective laser melted Ti–5Al–5Mo–5V–1Cr–1Fe alloy with high strength and ductility. Materials Science and Engineering A.DOI
何克准，李群，刘胜胆，张新明，周科朝（2021）. 预拉伸对高强Al-Zn-Mg-Cu-Zr合金板材淬火敏感性效应的影响（英文）. Journal of Central South University.
史双喜，刘秀生，张晓泳，周科朝（2021）. 基于SCA与BPANN模型的近βTi-55511合金热压缩流变行为对比（英文）. Transactions of Nonferrous Metals Society of China.
Yinxiang Bao, Baiyun Huang, Kechao Zhou, James I. Roscow, Eleanor Roake, Margaret A. Hopkins, Dou Zhang, Yan Zhang, Chris Bowen (2021). Hierarchically structured lead-free barium strontium titanate for low-grade thermal energy harvesting. Ceramics International.DOI
Xinchi Chen, Xiaoyong Zhang, Chao Chen, Kechao Zhou (2021). Mechanical Response and Deformation Mechanisms of TB17 Titanium Alloy at High Strain Rates. Processes.DOI
Chengpeng Zhu, Chao Li, Di Wu, Wan Ye, Shuangxi Shi, Hui Ming, Xiaoyong Zhang, Kechao Zhou (2021). A titanium alloys design method based on high-throughput experiments and machine learning. Journal of Materials Research and Technology.DOI
Hande Wang, Jinyang Ge, Xiaoyong Zhang, Chao Chen, Kechao Zhou (2021). Investigation of the Dynamic Recovery and Recrystallization of Near-β Titanium Alloy Ti-55511 during Two-Pass Hot Compression. Metals.DOI
Yi Hui Guo, Shaohong Wei, Sheng Li Yang, Yubin Ke, Xiaoyong Zhang, Kechao Zhou (2021). Precipitation Behavior of ω Phase and ω→α Transformation in Near β Ti-5Al-5Mo-5V-1Cr-1Fe Alloy during Aging Process. Metals.DOI
Yonghong Chen, Lu Wang, Leyang Liu, Lin Tang, Xi Yuan, Haiyan Chen, Kechao Zhou, Dou Zhang (2021). Thickness-dependent ferroelectric properties of HfO2/ZrO2 nanolaminates using atomic layer deposition. Journal of Materials Science.DOI
Yinghao Chen, Xiaolei Gao, Guoshuai Liu, Ruitong Zhu, Wanlin Yang, Zhishen Li, Fangmu Liu, Kechao Zhou, Zhiming Yu, Qiuping Wei, Li Ma (2021). Correlation of the role of boron concentration on the microstructure and electrochemical properties of diamond electrodes. Functional Diamond.DOI
Siyu Zhang, Jingzhe Wang, Lan Huang, Shesh K. Srivatsa, Kechao Zhou, Zaiwang Huang, Liang Jiang (2021). Correction of flow stress data due to non-homogeneous deformation and thermal conditions during hot compression testing of a polycrystalline nickel-base superalloy. Journal of Materials Science.DOI
Guo Ru, Hang Luo, Xuefan Zhou, Zhida Xiao, Haoran Xie, Yuan Liu, Kechao Zhou, Zhonghui Shen, Long‐Qing Chen, Dou Zhang (2021). Ultrahigh energy density of poly(vinylidene fluoride) from synergistically improved dielectric constant and withstand voltage by tuning the crystallization behavior. Journal of Materials Chemistry A.DOI
Yong He, Kechao Zhou, Yan Zhang, Huiwen Xiong, Lei Zhang (2021). Recent progress of inert anodes for carbon-free aluminium electrolysis: a review and outlook. Journal of Materials Chemistry A.DOI
Yan Zhang, Thuy‐Phuong T. Pham, Nguyen Phuc Hoang Duy, Eleanor Roake, Hamideh Khanbareh, Margaret A. Hopkins, Xuefan Zhou, Dou Zhang, Kechao Zhou, Chris Bowen (2021). Polarisation tuneable piezo-catalytic activity of Nb-doped PZT with low Curie temperature for efficient CO 2 reduction and H 2 generation. Nanoscale Advances.DOI
Hanyu Gong, Lu Wang, Kechao Zhou, Dou Zhang, Yan Zhang, Vana Adamaki, Aleksandrs Sergejevs, Chris Bowen (2021). Improved photocatalytic performance of gradient reduced TiO2 ceramics with aligned pore channels. Advanced Powder Materials.DOI
Yiyou Wu, Taomei Zhang, Chao Chen, Seyed Reza Elmi Hosseini, Xiaoyong Zhang, Kechao Zhou (2021). Microstructure and mechanical property evolution of additive manufactured eutectic Al-2Fe alloy during solidification and aging. Journal of Alloys and Compounds.DOI
Bensheng Wei, Longfei Zhang, Lan Huang, Kechao Zhou, Zaiwang Huang (2021). Nanomechanical properties of a nickel-base single-crystal superalloy up to 700°C. Philosophical Magazine Letters.DOI
Mingyang Yan, Shengwen Liu, Zhida Xiao, Xi Yuan, Di Zhai, Kechao Zhou, Dou Zhang, Guodong Zhang, Chris Bowen, Yan Zhang (2021). Evaluation of the pore morphologies for piezoelectric energy harvesting application. Ceramics International.DOI
Taomei Zhang, Chao Chen, Jing Dong, Yiyou Wu, Qian Hu, Ting Lei, Pengfei Lei, Kechao Zhou (2021). Microstructure and biocompatibility of porous-Ta/Ti-6Al-4 V component produced by laser powder bed fusion for orthopedic implants. Materials Characterization.DOI
Qi Di Zhao, Xueping Gan, Chaoqiang Liu, Huiwen Xiong, Kechao Zhou (2021). Mechanical behavior and microstructure of 3D-printed carbon nanotubes-reinforced Cu composite. Diamond and Related Materials.DOI
Hao Zhang, Xiaoqin Ou, Xiaoyong Zhang, Hongge Yan, Kechao Zhou, Min Jung Song (2021). Effects of Al on crack propagation in titanium alloys and the governing toughening mechanism. Mechanics of Materials.DOI
Zejun Deng, Hangyu Long, Yijia Wang, Zhiming Yu, Li Ma, Kechao Zhou, Qiuping Wei (2021). Template-free synthesis of millimeter-scale carbon nanorod arrays on boron-doped diamond with superior glucose sensing performance. Applied Surface Science.DOI
Fangmu Liu, Zejun Deng, Dongtian Miao, Weipeng Chen, Yijia Wang, Kechao Zhou, Li Ma, Qiuping Wei (2021). A highly stable microporous boron-doped diamond electrode etched by oxygen plasma for enhanced electrochemical ozone generation. Journal of environmental chemical engineering.DOI
Dongtian Miao, Zhishen Li, Yinghao Chen, Guoshuai Liu, Zejun Deng, Yanglei Yu, Songbo Li, Kechao Zhou, Li Ma, Qiuping Wei (2021). Preparation of macro-porous 3D boron-doped diamond electrode with surface micro structure regulation to enhance electrochemical degradation performance. Chemical Engineering Journal.DOI
Kezhun He, Qun Li, Shengdan Liu, Xinming Zhang, Kechao Zhou (2021). Influence of pre-stretching on quench sensitive effect of high-strength Al−Zn−Mg−Cu-Zr alloy sheet. Journal of Central South University.DOI
Wanlin Yang, Jilin Tan, Yinhao Chen, Zhishen Li, Fangmu Liu, Hangyu Long, Qiuping Wei, Libin Liu, Li Ma, Kechao Zhou, Zhiming Yu (2021). Relationship between substrate type and BDD electrode structure, performance and antibiotic tetracycline mineralization. Journal of Alloys and Compounds.DOI
Ting Shen, Huiwen Xiong, Zhiyou Li, Lei Zhang, Kechao Zhou (2021). Fused deposition fabrication of high-quality zirconia ceramics using granular feedstock. Ceramics International.DOI
Haichao Li, Wanlin Yang, Li Ma, Guoshuai Liu, Yue Yu, Jun Cao, Ruitong Zhu, Weipeng Chen, Zhiming Yu, Hangyu Long, Kechao Zhou, Qiuping Wei (2021). 3D-printed highly ordered Ti networks-based boron-doped diamond: An unprecedented robust electrochemical oxidation anode for decomposition of refractory organics. Chemical Engineering Journal.DOI
Chengpeng Zhu, Genshen Peng, Y.C. Lin, Xiaoyong Zhang, Chaoqiang Liu, Kechao Zhou (2021). Effects of Mo and Cr contents on microstructures and mechanical properties of near β-Ti alloy. Materials Science and Engineering A.DOI
Qianqian Xu, Xinyu Gao, Senfeng Zhao, You‐Nian Liu, Dou Zhang, Kechao Zhou, Hamideh Khanbareh, Wansong Chen, Yan Zhang, Chris Bowen (2021). Bio‐Piezoelectric Platforms: Construction of Bio‐Piezoelectric Platforms: From Structures and Synthesis to Applications (Adv. Mater. 27/2021). Advanced Materials.DOI
Mingyang Yan, Junwen Zhong, Shengwen Liu, Zhida Xiao, Xi Yuan, Di Zhai, Kechao Zhou, Zhaoyang Li, Dou Zhang, Chris Bowen, Yan Zhang (2021). Flexible pillar-base structured piezocomposite with aligned porosity for piezoelectric energy harvesting. Nano Energy.DOI
Feng Li, Taomei Zhang, Chao Chen, Xiaochun Liu, Kechao Zhou (2021). Constructing an ultrahard layer on the surface of Ti3AlC2 ceramics via electron beam surface remelting. Materials Letters.DOI
Pengfei Lei, Qian Hu, Taomei Zhang, Ting Lei, Yihe Hu, Chao Chen, Kechao Zhou (2021). Porous tantalum structure integrated on Ti6Al4V base by Laser Powder Bed Fusion for enhanced bony-ingrowth implants: In vitro and in vivo validation. Bioactive Materials.DOI
Junwang Deng, Chao Chen, Xiaochun Liu, Yunping Li, Kechao Zhou, Shengmin Guo (2021). A high-strength heat-resistant Al−5.7Ni eutectic alloy with spherical Al3Ni nano-particles by selective laser melting. Scripta Materialia.DOI
Shuangxi Shi, Xiu-sheng LIU, Xiaoyong Zhang, Kechao Zhou (2021). Comparison of flow behaviors of near beta Ti-55511 alloy during hot compression based on SCA and BPANN models. Transactions of Nonferrous Metals Society of China.DOI
Hualong Huang, Dan Li, Chao Chen, Ruidi Li, Xiaoyong Zhang, Shichao Liu, Kechao Zhou (2021). Selective laser melted near-beta titanium alloy Ti-5Al-5Mo-5V-1Cr-1Fe: Microstructure and mechanical properties. Journal of Central South University.DOI
Chuying Yu, Giuseppe Viola, Dou Zhang, Zaira Stroscio, Zimeng Hu, Eskilla Venkata Ramana, Salvatore Grasso, Rory M. Wilson, Kechao Zhou, Nicola Bonini, Andrew Dominic Fortes, Isaac Abrahams, Haixue Yan (2021). Structural Evolution in BiNbO4. Inorganic Chemistry.DOI
Qianqian Xu, Xinyu Gao, Senfeng Zhao, You‐Nian Liu, Dou Zhang, Kechao Zhou, Hamideh Khanbareh, Wansong Chen, Yan Zhang, Chris Bowen (2021). Construction of Bio‐Piezoelectric Platforms: From Structures and Synthesis to Applications. Advanced Materials.DOI
Kezhun He, Zimeng Tan, Xiuyuan Zheng, X M Zhang, Kechao Zhou (2021). Microstructure and Mechanical Properties of DC Cast 7065 Aluminum Alloy. Journal of Physics Conference Series.DOI
Hongli Zhou, Xiaofeng Wang, Xiaofeng Wang, Chaoqun Peng, Xinyu Wang, Kechao Zhou (2021). Principles of Dispersing Powders for 3D Printing. Colloids and Interfaces.DOI
Dan Li, Hualong Huang, Chao Chen, Shichao Liu, Xiaochun Liu, Xiaoyong Zhang, Kechao Zhou (2021). Additive manufacturing of high strength near β titanium alloy Ti-55511 by engineering nanoscale secondary α laths via in-situ heat treatment. Materials Science and Engineering A.DOI
Lianzhong Zhao, Xiaofeng Wang, Huiwen Xiong, Kechao Zhou, Dou Zhang (2021). Optimized preceramic polymer for 3D structured ceramics via fused deposition modeling. Journal of the European Ceramic Society.DOI
Hao Wan, Wei Ma, Kechao Zhou, Yijun Cao, Xiaohe Liu, Renzhi Ma (2021). Advanced silicon nanostructures derived from natural silicate minerals for energy storage and conversion. Green Energy & Environment.DOI
Kezhun He, Zimeng Tan, Xu Zheng, Xinming Zhang, Biao Chen, Kechao Zhou (2021). Flow Stress Behavior and Microstructural Evolution of DC Cast 7065 Aluminum Alloy During Hot Compression Deformation. Journal of Physics Conference Series.DOI
Kezhun He, Zimeng Tan, Xu Zheng, Xinming Zhang, Biao Chen, Kechao Zhou (2021). Development of processing maps for DC cast 7065 aluminum alloy. Journal of Physics Conference Series.DOI
成金娟，甘雪萍，李周，雷前，周科朝（2020）. Cu-15Ni-8Sn合金在油润滑条件下与轴承钢滑动磨损行为的磨损图（英文）. Journal of Central South University.
孙阳，王艳，李云，周科朝，张雷（2020）. 球形石墨增强银-石墨复合材料的摩擦学行为（英文）. Transactions of Nonferrous Metals Society of China.
Dan Xie, Huiwen Xiong, Yuxue Wu, Xueping Gan, Zhiyou Li, Kechao Zhou (2020). Dense TiN‐Ni cermets with improved sinterability, microstructure, and mechanical properties using Ni‐coated TiN powders. International Journal of Applied Ceramic Technology.DOI
Jing Dong, Shichao Liu, Hui Chen, Dan Li, Taomei Zhang, Chao Chen, Kechao Zhou (2020). Effect of atmosphere on the microstructure and properties of additively manufactured tungsten. Materials Science and Technology.DOI
Haichao Li, Yaohua Guo, Sichao Zeng, Qiuping Wei, Sharel Peisan E, Ruitong Zhu, Jun Cao, Li Ma, Kechao Zhou, Lingcong Meng (2020). High-sensitivity, selective determination of dopamine using bimetallic nanoparticles modified boron-doped diamond electrode with anodic polarization treatment. Journal of Materials Science.DOI
Di Wu, Libin Liu, Ligang Zhang, Wanlin Wang, Kechao Zhou (2020). Tensile deformation mechanism and micro-void nucleation of Ti-55531 alloy with bimodal microstructure. Journal of Materials Research and Technology.DOI
Yongpeng Lei, Qichen Wang, Shengjie Peng, Seeram Ramakrishna, Dou Zhang, Kechao Zhou (2020). Electrospun Inorganic Nanofibers for Oxygen Electrocatalysis: Design, Fabrication, and Progress. Advanced Energy Materials.DOI
Jinjuan Cheng, Mincong Mao, Xueping Gan, Qian Lei, Zhou Li, Kechao Zhou (2020). Microstructures, mechanical properties, and grease-lubricated sliding wear behavior of Cu-15Ni-8Sn-0.8Nb alloy with high strength and toughness. Friction.DOI
Di Wu, Libin Liu, Lijun Zeng, Wenguang Zhu, Wanlin Wang, Xiaoyong Zhang, Junfeng Hou, Baoliang Liu, Jiafeng Lei, Kechao Zhou (2020). Designing high-strength titanium alloy using pseudo-spinodal mechanism through diffusion multiple experiment and CALPHAD calculation. Journal of Material Science and Technology.DOI
Junwang Deng, Chao Chen, Wei Zhang, Yunping Li, Ruidi Li, Kechao Zhou (2020). Densification, Microstructure, and Mechanical Properties of Additively Manufactured 2124 Al–Cu Alloy by Selective Laser Melting. Materials.DOI
Ting Liu, Dongtian Miao, Guoshuai Liu, Qiuping Wei, Kechao Zhou, Zhiming Yu, Li Ma (2020). A novel gradient current density output mode for effective electrochemical oxidative degradation of dye wastewater by boron-doped diamond (BDD) anode. Water Science & Technology.DOI
Ying Yang, Zhonggen Dong, Min Li, Lihong Liu, Hang Luo, Pu Wang, Dou Zhang, Xinghua Yang, Kechao Zhou, Shaorong Lei (2020). Graphene Oxide/Copper Nanoderivatives-Modified Chitosan/Hyaluronic Acid Dressings for Facilitating Wound Healing in Infected Full-Thickness Skin Defects. International Journal of Nanomedicine.DOI
Zhenyu Wang, Libin Liu, Di Wu, Ligang Zhang, Wanlin Wang, Kechao Zhou (2020). α″ phase-assisted nucleation to obtain ultrafine α precipitates for designing high-strength near-β titanium alloys. Transactions of Nonferrous Metals Society of China.DOI
Haichao Li, Jun Cao, Qiuping Wei, Li Ma, Kechao Zhou, Zhiming Yu, Sichao Zeng, Ruitong Zhu, Wanlin Yang, Cheng‐Te Lin, Lingcong Meng (2020). Antifouling nanoporous diamond membrane for enhanced detection of dopamine in human serum. Journal of Materials Science.DOI
Ru Guo, Hang Luo, Mingyang Yan, Xuefan Zhou, Kechao Zhou, Dou Zhang (2020). Significantly enhanced breakdown strength and energy density in sandwich-structured nanocomposites with low-level BaTiO3 nanowires. Nano Energy.DOI
Huiwen Xiong, Lianzhong Zhao, Hehao Chen, Hang Luo, Xi Yuan, Kechao Zhou, Dou Zhang (2020). Building SiC-based composites from polycarbosilane-derived 3D-SiC scaffolds via polymer impregnation and pyrolysis (PIP). Journal of the European Ceramic Society.DOI
Wei Chen, Chao Li, Kang-Tun Feng, Y.C. Lin, Xiaoyong Zhang, Chao Chen, Kechao Zhou (2020). Strengthening of a Near β-Ti Alloy through β Grain Refinement and Stress-Induced α Precipitation. Materials.DOI
Wei Chen, Sheng Li Yang, Y.C. Lin, Chao Chen, Xiaoyong Zhang, Kechao Zhou (2020). Multi-scale characterization of deformation features and precipitation behavior in a near β-Ti alloy. Materials Characterization.DOI
Haichao Li, Kechao Zhou, Jun Cao, Qiuping Wei, Cheng‐Te Lin, Enhui Pei, Li Ma, Naixiu Hu, Yaohua Guo, Zejun Deng, Zhiming Yu, Sichao Zeng, Wanlin Yang, Lingcong Meng (2020). A novel modification to boron-doped diamond electrode for enhanced, selective detection of dopamine in human serum. Carbon.DOI
Qi Di Zhao, Qian Lei, Xueping Gan, Long Zhang, Kechao Zhou (2020). Effects of the partially-unzipped carbon nanotubes on the microstructure and properties of CuCr matrix composites. Diamond and Related Materials.DOI
Weipeng Chen, Wei Li, Fangmu Liu, Dongtian Miao, Li Ma, Xiaolei Gao, Qiuping Wei, Kechao Zhou, Zhiming Yu, Yanglei Yu (2020). Microstructure of boron doped diamond electrodes and studies on its basic electrochemical characteristics and applicability of dye degradation. Journal of environmental chemical engineering.DOI
Wei Chen, Sheng Li Yang, Y.C. Lin, Shuangxi Shi, Chao Chen, Xiaoyong Zhang, Kechao Zhou (2020). Cyclic deformation responses in α-phase of a lamellar near β-Ti alloy. Materials Science and Engineering A.DOI
Yang Sun, Yan Wang, Yun Li, Kechao Zhou, Lei Zhang (2020). Tribological behaviors of Ag−graphite composites reinforced with spherical graphite. Transactions of Nonferrous Metals Society of China.DOI
Naixiu Hu, Haichao Li, Qiuping Wei, Kechao Zhou, Wei Zhu, Long Zhang, Songbo Li, Wentao Ye, Zengkai Jiao, Jingting Luo, Li Ma, Qingwei Yan, Cheng‐Te Lin (2020). Continuous diamond-carbon nanotube foams as rapid heat conduction channels in composite phase change materials based on the stable hierarchical structure. Composites Part B Engineering.DOI
Wei Chen, Xiaoyong Zhang, Y.C. Lin, Kechao Zhou (2020). Study on Grain Refinement Mechanisms and Mechanical Properties of bi-Modal Ti-55511 Titanium Alloy during Hot Rolling. Materials.DOI
Jiaxuan Pu, Jun Cao, Li Ma, Kechao Zhou, Zhiming Yu, Dengfeng Yin, Qiuping Wei (2020). Novel three-dimensional Mo2C/carbon nanotubes composites for hydrogen evolution reaction. Materials Letters.DOI
Guo-Dong Pang, Y.C. Lin, Yu‐Qiang Jiang, Xiaoyong Zhang, Xingang Liu, Yiwei Xiao, Kechao Zhou (2020). Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation. Materials Characterization.DOI
Jun Cao, Haichao Li, Ruitong Zhu, Li Ma, Kechao Zhou, Qiuping Wei, Fenghua Luo (2020). Improved hydrogen generation via a urea-assisted method over 3D hierarchical NiMo-based composite microrod arrays. Journal of Alloys and Compounds.DOI
Qi Di Zhao, Yichun Liu, Qian Lei, Wanyu Li, Xueping Gan, Kechao Zhou (2020). Enhanced mechanical properties of alloyed copper matrix composites reinforced with partially-unzipped carbon nanotubes. Materials Science and Engineering A.DOI
Yiwei Xiao, Y.C. Lin, Yu‐Qiang Jiang, Xiaoyong Zhang, Guo-Dong Pang, Dan Wang, Kechao Zhou (2020). A dislocation density-based model and processing maps of Ti-55511 alloy with bimodal microstructures during hot compression in α+β region. Materials Science and Engineering A.DOI
Dou Zhang, Shaofeng Zhang, Xi Yuan, Xuefan Zhou, He Qi, Mingyang Yan, Zhongna Yan, Kechao Zhou (2020). Enhanced piezoelectric properties in textured NaNbO3–BaTiO3–SrZrO3 ceramics by templated grain growth. Journal of Alloys and Compounds.DOI
Shenglin Chu, Gang Liu, Huiwen Xiong, Zhiyou Li, Kechao Zhou (2020). High-quality Ti(C,N)-based cermets via solid-state nitrogen-pressure sintering: Influence of the sintering atmosphere. International Journal of Refractory Metals and Hard Materials.DOI
Dou Zhang, Xuefan Zhou, James I. Roscow, Kechao Zhou, Lu Wang, Hang Luo, Chris Bowen (2020). Author Correction: Significantly Enhanced Energy Storage Density by Modulating the Aspect Ratio of BaTiO3 Nanofibers. Scientific Reports.DOI
Qiuping Wei, Guoshuai Liu, Chengwu Zhu, Bo Zhou, Ruiqiong Mei, Li Ma, Long Zhang, Wanlin Yang, Wentao Ye, Kechao Zhou, Zhiming Yu (2020). Ordered structures with functional units (OSFU) enabled highly robust diamond anode for electrochemical decomposing of organic pollutants. Chemical Engineering Journal.DOI
Wei Li, Guoshuai Liu, Dongtian Miao, Zhishen Li, Yinghao Chen, Xiaolei Gao, Ting Liu, Qiuping Wei, Li Ma, Kechao Zhou, Zhiming Yu (2020). Electrochemical oxidation of Reactive Blue 19 on boron-doped diamond anode with different supporting electrolyte. Journal of environmental chemical engineering.DOI
Huiwen Xiong, Shenglin Chu, Pengfei Lei, Zhiyou Li, Kechao Zhou (2020). Ti(C,N)-based cermets containing uniformly dispersed ultrafine rimless grains: Effect of VC additions on the microstructure and mechanical properties. Ceramics International.DOI
Wei Chen, Yuhong Lin, Xiaoyong Zhang, Kechao Zhou (2020). Balancing strength and ductility by controllable heat-treatment twinning in a near β-Ti alloy. Journal of Materials Research and Technology.DOI
Biao Deng, Qiuping Wei, Mingkun Yi, Yijie Luo, Liang Li, Kechao Zhou, Li Ma (2020). Coupling Effects of CH4/H2/Ar Gas Ratios and Hot Filament-Substrate Distance on the Growth of Nanocrystalline Diamond. Journal of Superhard Materials.DOI
Wengkai Deng, Dong Zhang, Hongyu Wu, Zaiwang Huang, Kechao Zhou, Liang Jiang (2020). Prediction of yield strength in a polycrystalline nickel base superalloy during interrupt cooling. Scripta Materialia.DOI
Y.C. Lin, Yiwei Xiao, Yu‐Qiang Jiang, Guo-Dong Pang, Hong-Bin Li, Xiaoyong Zhang, Kechao Zhou (2020). Spheroidization and dynamic recrystallization mechanisms of Ti-55511 alloy with bimodal microstructures during hot compression in α+β region. Materials Science and Engineering A.DOI
Shengyou Bao, Qiuping Wei, Jun Cao, Haichao Li, Li Ma, Junjie An, Cheng‐Te Lin, Jingting Luo, Kechao Zhou (2020). Hydrophilic modification of carbon nanotube to prepare a novel porous copper network-carbon nanotube/erythritol composite phase change material. Composite Interfaces.DOI
Dongtian Miao, Ting Liu, Yanglei Yu, Songbo Li, Guoshuai Liu, Yinghao Chen, Qiuping Wei, Kechao Zhou, Zhiming Yu, Li Ma (2020). Study on degradation performance and stability of high temperature etching boron-doped diamond electrode. Applied Surface Science.DOI
Dongtian Miao, Guoshuai Liu, Qiuping Wei, Naixiu Hu, Kuangzhi Zheng, Chengwu Zhu, Ting Liu, Kechao Zhou, Zhiming Yu, Li Ma (2020). Electro-activated persulfate oxidation of malachite green by boron-doped diamond (BDD) anode: effect of degradation process parameters. Water Science & Technology.DOI
Yan Zhang, Margaret A. Hopkins, David J. Liptrot, Hamideh Khanbareh, Pim Groen, Xuefan Zhou, Dou Zhang, Yinxiang Bao, Kechao Zhou, Chris Bowen, David R. Carbery (2020). Harnessing Plasticity in an Amine‐Borane as a Piezoelectric and Pyroelectric Flexible Film. Angewandte Chemie.DOI
Jinjuan Cheng, Xueping Gan, Zhou Li, Qian Lei, Kechao Zhou (2020). Wear map for sliding wear behavior of Cu-15Ni-8Sn alloy against bearing steel under oil-lubricated condition. Journal of Central South University.DOI
Yijie Luo, Li Ma, Liang Li, Yubo Chen, Kechao Zhou, Mingkun Yi, Biao Deng, Haohui Yang, Xin Tao Xia, Tengyu Hua, Dengfeng Yin, Qiuping Wei (2020). Effect of bottom micro-crystalline diamond (MCD) layer and top nano-crystalline diamond (NCD) layer onto the tribological behavior of (MCD/NCD) bilayer film. Materials Research Express.DOI
Xi Yuan, Xiaoyu Wang, Mingyang Yan, Feng Gao, Shaofeng Zhang, Kechao Zhou, Xiaobo Ji, Dou Zhang (2020). Effects of composite layer thickness and driving conditions on the actuating performance of shear piezoelectric fiber composite. Measurement.DOI
Yilin Wang, Xiaobin Li, Qiusheng Zhou, Biao Wang, Tiangui Qi, Guihua Liu, Zhihong Peng, Kechao Zhou (2020). Observation of sodium titanate and sodium aluminate silicate hydrate layers on diaspore particles in high-temperature Bayer digestion. Hydrometallurgy.DOI
Wei Chen, Hande Wang, Y.C. Lin, Xiaoyong Zhang, Chao Chen, Yaping Lv, Kechao Zhou (2020). The dynamic responses of lamellar and equiaxed near β-Ti alloys subjected to multi-pass cross rolling. Journal of Material Science and Technology.DOI
Jinjuan Cheng, Xueping Gan, Qian Lei, Mincong Mao, Zhou Li, Kechao Zhou (2020). Tribological Behaviors of an Ultrahigh Strength Cu–15Ni–8Sn–0.2Y Alloy Sliding Against TC6 Titanium Alloy in Deionized Water and Seawater. Tribology Letters.DOI
Sichao Zeng, Qiuping Wei, Hangyu Long, Lingcong Meng, Li Ma, Jun Cao, Haichao Li, Zhiming Yu, Cheng‐Te Lin, Kechao Zhou, Enhui Pei (2020). Annealing temperature regulating the dispersity and composition of nickel-carbon nanoparticles for enhanced glucose sensing. Journal of Electroanalytical Chemistry.DOI
Qi Di Zhao, Xueping Gan, Qian Lei, Wanyu Li, Kechao Zhou (2020). Enhanced the strength and ductility of the partially unzipped carbon nanotubes reinforced CuCr matrix composites via optimization of the interface structure. Composite Interfaces.DOI
Haiyan Chen, Yonghong Chen, Lin Tang, Hang Luo, Kechao Zhou, Xi Yuan, Dou Zhang (2020). Obvious ferroelectricity in undoped HfO 2 films by chemical solution deposition. Journal of Materials Chemistry C.DOI
Yupeng Ma, Hang Luo, Xuefan Zhou, Ru Guo, Feng Dang, Kechao Zhou, Dou Zhang (2020). Suppressed polarization by epitaxial growth of SrTiO 3 on BaTiO 3 nanoparticles for high discharged energy density and efficiency nanocomposites. Nanoscale.DOI
Jun Cao, Xiaobin Chen, Haichao Li, Jiaxuan Pu, Limei Liu, Li Ma, Kechao Zhou, Zejie Zhang, Qiuping Wei, Fenghua Luo (2020). A Co/CoO hybrid rooted on carbon cloth as an efficient electrocatalyst for the hydrogen evolution reaction in alkaline solution. Sustainable Energy & Fuels.DOI
Jun Cao, Zejie Zhang, Haichao Li, Ruitong Zhu, Songbo Li, Li Ma, Kechao Zhou, Qiuping Wei, Fenghua Luo (2020). Facile preparation of nickel hydroxide nanoplates on nickel foam for high performance hydrogen generation. Sustainable Energy & Fuels.DOI
王艳，张雷，翟洪飞，高红霞，周科朝（2019）. Cu-15Ni-8Sn/石墨复合材料在海水、去离子水和干摩擦中的摩擦学行为研究（英文）. Journal of Central South University.
Chen-Hong Liu, Xue-Ping Gan, Kechao Zhou (2019). Microstructure and properties of open‐cell Ni–Sn–P alloy foams prepared by electroless plating. Materials and Corrosion.DOI
Yujuan Huang, Huiwen Xiong, Jinzhu Zou, Kechao Zhou, Dou Zhang (2019). Ultralight porous SiC with attracting strength: Freeze casting of polycarbosilane/SiCp/camphene-based suspensions. Ceramics International.DOI
Ru Guo, James I. Roscow, Chris Bowen, Hang Luo, Yujuan Huang, Yupeng Ma, Kechao Zhou, Dou Zhang (2019). Significantly enhanced permittivity and energy density in dielectric composites with aligned BaTiO 3 lamellar structures. Journal of Materials Chemistry A.DOI
Jinjuan Cheng, Zheming Wang, Xueping Gan, Qian Lei, Li Zhou, Kechao Zhou (2019). Corrosion and corrosive‐wear behaviors of a high strength and toughness Cu–15Ni–8Sn alloy in seawater. Materials and Corrosion.DOI
Liang Li, Qiuping Wei, Li Ma, Yijie Luo, Kechao Zhou, Mingkun Yi, Biao Deng, Yubo Chen (2019). Preparation of cemented carbide diamond films by gaseous boronizing pretreatment combines with self-assembly seeding process. International Journal of Refractory Metals and Hard Materials.DOI
Huiwen Xiong, Hehao Chen, Zhaoke Chen, Xiang Xiong, Dou Zhang, Kechao Zhou (2019). 3D-SiC decorated with SiC whiskers: Chemical vapor infiltration on the porous 3D-SiC lattices derived from polycarbosilane-based suspensions. Ceramics International.DOI
Fuwen Chen, Guanglong Xu, Kechao Zhou, Hui Chang, Yuwen Cui (2019). Isochronal and isothermal phase transformation in β + αacicular Ti–55531. Journal of Materials Science.DOI
Huiwen Xiong, Dan Xie, Jinjuan Chen, Shenglin Chu, Xueping Gan, Zhiyou Li, Kechao Zhou (2019). Ti(C,N)‐based cermets with strengthened interfaces: Roles of secondary cubic carbides. Journal of the American Ceramic Society.DOI
Hongling Zhang, Xiaoyong Zhang, Zhishou Zhu, Chao Li, Kechao Zhou (2019). Characterization of a new type grain boundary phase in near-β titanium alloys. Scripta Materialia.DOI
Mingyang Yan, Xi Yuan, Yan Zhang, Shaofeng Zhang, Xiaoyu Wang, Feng Gao, Kechao Zhou, Dou Zhang (2019). Investigation of shear piezoelectric fiber composite for flexible sensor application. Smart Materials and Structures.DOI
Wei Chen, Yaping Lv, Hande Wang, Xiaoyong Zhang, Chao Chen, Y.C. Lin, Kechao Zhou (2019). On the {101‾1} twin-accommodated mechanisms in equiaxed near β-Ti alloys operating by unidirectional and cross rolling. Materials Science and Engineering A.DOI
Xueping Gan, Dan Xie, Qiu-Ming Yang, Kechao Zhou, Huiwen Xiong (2019). Ti(C, N)-based cermets by vacuum sintering using Commercial Composite powders: Morphology evolution, Composition and related properties. Vacuum.DOI
Min Liu, Shichao Liu, Wei Qiu Chen, Chao Chen, Yaping Lv, Xiaoyong Zhang, Pengfei Lei, Yongcheng Lin, Kechao Zhou (2019). Effect of trace lanthanum hexaboride on the phase, grain structure, and texture of electron beam melted Ti-6Al-4V. Additive manufacturing.DOI
Ying Yang, Lihong Liu, Hang Luo, Dou Zhang, Shaorong Lei, Kechao Zhou (2019). Dual-Purpose Magnesium-Incorporated Titanium Nanotubes for Combating Bacterial Infection and Ameliorating Osteolysis to Realize Better Osseointegration. ACS Biomaterials Science & Engineering.DOI
Jun Cao, Haichao Li, Jiaxuan Pu, Sichao Zeng, Limei Liu, Long Zhang, Fenghua Luo, Li Ma, Kechao Zhou, Qiuping Wei (2019). Hierarchical NiMo alloy microtubes on nickel foam as an efficient electrocatalyst for hydrogen evolution reaction. International Journal of Hydrogen Energy.DOI
Long Zhang, Qiuping Wei, Junjie An, Li Ma, Kechao Zhou, Wentao Ye, Zhiming Yu, Xueping Gan, Cheng‐Te Lin, Jingting Luo (2019). Construction of 3D interconnected diamond networks in Al-matrix composite for high-efficiency thermal management. Chemical Engineering Journal.DOI
Y.C. Lin, Guo-Dong Pang, Yu‐Qiang Jiang, Xingang Liu, Xiaoyong Zhang, Chao Chen, Kechao Zhou (2019). Hot compressive deformation behavior and microstructure evolution of a Ti-55511 alloy with basket-weave microstructures. Vacuum.DOI
Huiwen Xiong, Lianzhong Zhao, Hehao Chen, Xiaofeng Wang, Kechao Zhou, Dou Zhang (2019). 3D SiC containing uniformly dispersed, aligned SiC whiskers: Printability, microstructure and mechanical properties. Journal of Alloys and Compounds.DOI
Yilin Wang, Xiaobin Li, Qiusheng Zhou, Tiangui Qi, Guihua Liu, Zhihong Peng, Kechao Zhou (2019). Effects of Si-bearing minerals on the conversion of hematite into magnetite during reductive Bayer digestion. Hydrometallurgy.DOI
Hongyu Wu, Dong Zhang, Biaobiao Yang, Chao Chen, Yunping Li, Kechao Zhou, Liang Jiang, Ruiping Liu (2019). Microstructural evolution and defect formation in a powder metallurgy nickel-based superalloy processed by selective laser melting. Journal of Material Science and Technology.DOI
Xiaofan Cheng, Shichao Liu, Chao Chen, Wei Chen, Min Liu, Ruidi Li, Xiaoyong Zhang, Kechao Zhou (2019). Microstructure and mechanical properties of additive manufactured porous Ti–33Nb–4Sn scaffolds for orthopaedic applications. Journal of Materials Science Materials in Medicine.DOI
Yue Yuan, Xueping Gan, Yuanteng Lai, Qi Di Zhao, Kechao Zhou (2019). Microstructure and properties of graphite/copper composites fabricated with Cu-Ni double-layer coated graphite powders. Composite Interfaces.DOI
Qi Di Zhao, Xueping Gan, Kechao Zhou (2019). Enhanced properties of carbon nanotube-graphite hybrid-reinforced Cu matrix composites via optimization of the preparation technology and interface structure. Powder Technology.DOI
Shiqiang Chen, Xueping Gan, Qi Di Zhao, Jinjuan Cheng, Kechao Zhou (2019). Properties and microstructure of nickel/graphite composites fabricated by electroless nickel plating and spark plasma sintering. Composite Interfaces.DOI
Gengming Zhang, Shichao Liu, Chao Chen, Xiaoyong Zhang, Xueping Gan, Qian Lei, Zhou Li, Kechao Zhou (2019). Effect of heat treatment on microstructure and mechanical properties of a selective laser melted Cu–15Ni–8Sn alloy. Materials Science and Engineering A.DOI
Jinjuan Cheng, Shizhong Zhang, Xueping Gan, Li Zhou, Kechao Zhou (2019). Wear Regime and Wear Mechanism Map for Spark-Plasma-Sintered Cu-15Ni-8Sn-0.2Nb Alloy under Oil Lubrication. Journal of Materials Engineering and Performance.DOI
Xiangming Xu, Xiaobin Li, Qiusheng Zhou, Tiangui Qi, Kechao Zhou, Guihua Liu, Zhihong Peng (2019). Equilibrium WO3 concentration in the Ca2+-(NH4)2CO3-(NH4)2WO4-NH3-H2O system. Chemical Engineering Science.DOI
Wei Chen, Yaping Lv, Xiaoyong Zhang, Chao Chen, Y.C. Lin, Kechao Zhou (2019). Comparing the evolution and deformation mechanisms of lamellar and equiaxed microstructures in near β-Ti alloys during hot deformation. Materials Science and Engineering A.DOI
Y.C. Lin, Jian Huang, Dao‐Guang He, Xiaoyong Zhang, Qiao Wu, Lihua Wang, Chao Chen, Kechao Zhou (2019). Phase transformation and dynamic recrystallization behaviors in a Ti55511 titanium alloy during hot compression. Journal of Alloys and Compounds.DOI
Xiaoyu Wang, Xi Yuan, Mingliang Wu, Feng Gao, Xuemei Yan, Kechao Zhou, Dou Zhang (2019). Effect of Epoxy Resin on the Actuating Performance of Piezoelectric Fiber Composites. Sensors.DOI
Can Li, Ting Kai Zhao, Qiuping Wei, Zejun Deng, Hangyu Long, Kuangzhi Zheng, Haichao Li, Yaohua Guo, Zhiming Yu, Li Ma, Kechao Zhou, Nan Huang, Cheng‐Te Lin (2019). The effect of heat treatment time on the carbon-coated nickel nanoparticles modified boron-doped diamond composite electrode for non-enzymatic glucose sensing. Journal of Electroanalytical Chemistry.DOI
Xuelei Ren, Zeyu Bian, Youneng Xie, Li Ma, Qiuping Wei, Jun Zuo, Xiyang Wang, Zhiming Yu, Kechao Zhou, Lei Zhang (2019). Fabrication and biological evaluation of titanium surfaces with multistage storage space for potential biomedical application. Materials Research Express.DOI
Zhenzhi Gong, Naixiu Hu, Wentao Ye, Kuangzhi Zheng, Can Li, Li Ma, Qiuping Wei, Zhiming Yu, Kechao Zhou, Nan Huang, Cheng‐Te Lin, Jingting Luo (2019). High-performance non-enzymatic glucose sensor based on Ni/Cu/boron-doped diamond electrode. Journal of Electroanalytical Chemistry.DOI
Mingkun Yi, Biao Deng, He Xiao, Qiuping Wei, Li Ma, Kechao Zhou, Yijie Luo, Liang Li, Lei Zhang, Zhiming Yu (2019). Gaseous boronizing pretreatment for the deposition of nanocrystalline diamond films on cemented carbide substrates. Materials Research Express.DOI
Xuelei Ren, Hekang Zhu, Na Liu, Qiuping Wei, Jiaxuan Pu, Li Ma, Yijia Wang, Youneng Xie, Bingqiang Wei, Zhiming Yu, Kechao Zhou (2019). Hydrogenated diamond-like carbon film prepared by RF bias assisting magnetron sputtering. Materials Research Express.DOI
Shaojun Li, Yaping Lv, Xiaoyong Zhang, Chao Chen, Kechao Zhou (2019). Twinning and its effect on the evolution of acicular α in Ti–5Al–5Mo–5V–3Cr–1Zr. Materials Science and Technology.DOI
Wei Zhu, Naixiu Hu, Quiping Wei, Long Zhang, Haichao Li, Jingting Luo, Cheng‐Te Lin, Li Ma, Kechao Zhou, Zhiming Yu (2019). Carbon nanotube-Cu foam hybrid reinforcements in composite phase change materials with enhanced thermal conductivity. Materials & Design.DOI
Qian-Wei Wang, Y.C. Lin, Yu‐Qiang Jiang, Xingang Liu, Xiaoyong Zhang, Dongdong Chen, Chao Chen, Kechao Zhou (2019). Precipitation behavior of a β-quenched Ti-5Al-5Mo-5V-1Cr-1Fe alloy during high-temperature compression. Materials Characterization.DOI
Jun Jiang, Ruidi Li, Tiechui Yuan, Pengda Niu, Chao Chen, Kechao Zhou (2019). Microstructural evolution and wear performance of the high-entropy FeMnCoCr alloy/TiC/CaF2 self-lubricating composite coatings on copper prepared by laser cladding for continuous casting mold. Journal of materials research/Pratt's guide to venture capital sources.DOI
Huiwen Xiong, Hehao Chen, Lianzhong Zhao, Yujuan Huang, Kechao Zhou, Dou Zhang (2019). SiCw/SiCp reinforced 3D-SiC ceramics using direct ink writing of polycarbosilane-based solution: Microstructure, composition and mechanical properties. Journal of the European Ceramic Society.DOI
Mang Ni, Shichao Liu, Chao Chen, Ruidi Li, Xiaoyong Zhang, Kechao Zhou (2019). Effect of heat treatment on the microstructural evolution of a precipitation-hardened superalloy produced by selective laser melting. Materials Science and Engineering A.DOI
Mang Ni, Chao Chen, Xiaojun Wang, Pengwei Wang, Ruidi Li, Xiaoyong Zhang, Kechao Zhou (2019). Corrigendum to: “Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing” [Mater. Sci. Eng. A 701 (2017) 344–351]. Materials Science and Engineering A.DOI
Liguo Zu, Jiahuan He, Xinli Liu, Lei Zhang, Kechao Zhou (2019). Effect of pore orientation on the catalytic performance of porous NiMo electrode for hydrogen evolution in alkaline solutions. International Journal of Hydrogen Energy.DOI
Yilin Wang, Xiaobin Li, Biao Wang, Qiusheng Zhou, Tiangui Qi, Guihua Liu, Zhihong Peng, Kechao Zhou (2019). Interactions of iron and titanium-bearing minerals under high-temperature Bayer digestion conditions. Hydrometallurgy.DOI
Ruiqiong Mei, Qiuping Wei, Chengwu Zhu, Wentao Ye, Bo Zhou, Li Ma, Zhiming Yu, Kechao Zhou (2019). 3D macroporous boron-doped diamond electrode with interconnected liquid flow channels: A high-efficiency electrochemical degradation of RB-19 dye wastewater under low current. Applied Catalysis B: Environmental.DOI
Hang Luo, Xuefan Zhou, Christopher Ellingford, Yan Zhang, Sheng Chen, Kechao Zhou, Dou Zhang, Chris Bowen, Chaoying Wan (2019). Interface design for high energy density polymer nanocomposites. Chemical Society Reviews.DOI
Zhongna Yan, Dou Zhang, Xuefan Zhou, He Qi, Hang Luo, Kechao Zhou, Isaac Abrahams, Haixue Yan (2019). Silver niobate based lead-free ceramics with high energy storage density. Journal of Materials Chemistry A.DOI
Qichen Wang, Ke Ye, Liang Xu, Wei Gang Hu, Yongpeng Lei, Yi Zhang, Yin Chen, Kechao Zhou, Jun Jiang, Jean‐Marie Basset, Dingsheng S. Wang, Yadong Li (2019). Carbon nanotube-encapsulated cobalt for oxygen reduction: integration of space confinement and N-doping. Chemical Communications.DOI
Kuangzhi Zheng, Hangyu Longn, Qiuping Wei, Li Ma, Leilei Qiao, Can Li, Lingcong Meng, Cheng‐Te Lin, Yunlu Jiang, Ting Kai Zhao, Kechao Zhou (2019). Non-Enzymatic Glucose Sensor Based on Hierarchical Au/Ni/Boron-Doped Diamond Heterostructure Electrode for Improving Performances. Journal of The Electrochemical Society.DOI
Guang-Wei Peng, Xueping Gan, Zhou Li, Kechao Zhou (2018). First-principles study of the (Cu x Ni1 − x )3Sn precipitations with different structures in Cu–Ni–Sn alloys. Chinese Physics B.DOI
Xiangming Xu, Kechao Zhou, Xiaobin Li, Qiusheng Zhou, Tiangui Qi, Guihua Liu, Zhihong Peng (2018). Leaching of synthetic Ca3WO6 with ammoniacal ammonium carbonate solution under atmospheric pressure: A fundamental study. Hydrometallurgy.DOI
Wei Chen, Chao Li, Xiaoyong Zhang, Chao Chen, Y.C. Lin, Kechao Zhou (2018). Deformation-induced variations in microstructure evolution and mechanical properties of bi-modal Ti-55511 titanium alloy. Journal of Alloys and Compounds.DOI
Huiwen Xiong, Yu Wen, Zhiyou Li, Kechao Zhou (2018). Dual‐grained (Ti, W)C–Ni cermets by two‐step carbonization: Hot isotropic press sintering of NiTiW alloys and colloidal graphite. Journal of the American Ceramic Society.DOI
Lu Wang, Hang Luo, Xuefan Zhou, Xi Yuan, Kechao Zhou, Dou Zhang (2018). Sandwich-structured all-organic composites with high breakdown strength and high dielectric constant for film capacitor. Composites Part A Applied Science and Manufacturing.DOI
Naixiu Hu, Yijia Wang, Jiaxin Li, Qiuping Wei, Yunlu Jiang, Li Ma, Zhiming Yu, Kechao Zhou, Hangyu Long (2018). Manipulation of nanostructured carbon films as field emitters in an electric-and-magnetic-field-assisted chemical vapor deposition process. Surface and Coatings Technology.DOI
Jingjing Liao, Dou Zhang, Xuewen Wu, Hang Luo, Kechao Zhou, Bo Su (2018). Preparation of high strength zirconia by epoxy gel-casting using hydantion epoxy resin as a gelling agent. Materials Science and Engineering C.DOI
Jinjuan Cheng, Xueping Gan, Shiqiang Chen, Yuanteng Lai, Huiwen Xiong, Kechao Zhou (2018). Properties and microstructure of copper/nickel-iron-coated graphite composites prepared by electroless plating and spark plasma sintering. Powder Technology.DOI
Xiaoyong Zhang, Yaping Mei, Yaping Lv, Chao Chen, Kechao Zhou (2018). Anisotropy of the Microstructure and Tensile Properties in Ti-5Al-5Mo-5V-1Cr-1Fe near β Titanium Alloy during Hot Rolling and Heat Treatment. Metals.DOI
Lin Tang, Chao Chen, Anqi Wei, Kun Li, Dou Zhang, Kechao Zhou (2018). Regulating crystal structure and ferroelectricity in Sr doped HfO2 thin films fabricated by metallo-organic decomposition. Ceramics International.DOI
Xuefan Zhou, Lu Wang, Guoliang Xue, Kechao Zhou, Hang Luo, Dou Zhang (2018). Improved dielectric constant and energy density of P(VDF-HFP) composites using NBT-xST (x=0, 0.10, 0.26) whiskers. Journal of Advanced Dielectrics.DOI
Long Zhang, Kechao Zhou, Quiping Wei, Li Ma, Wentao Ye, Haichao Li, Bo Zhou, Zhiming Yu, Cheng‐Te Lin, Jingting Luo, Xueping Gan (2018). Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage. Applied Energy.DOI
Y.C. Lin, Yi Ping Tang, Xiaoyong Zhang, Chao Chen, Hui Yang, Kechao Zhou (2018). Effects of solution temperature and cooling rate on microstructure and micro-hardness of a hot compressed Ti-6Al-4V alloy. Vacuum.DOI
Yuxue Wu, Huiwen Xiong, Xueping Gan, Zhiyou Li, Kechao Zhou (2018). Microstructure and mechanical properties of TiN‐based cermet reinforced by Cr 3 C 2 addition. International Journal of Applied Ceramic Technology.DOI
Zuojun Li, Jingjing Sun, Yixian Huang, Yanhua Liu, Jieni Xu, Yichao Chen, Lei Liang, Jiang Li, Qiongfeng Liao, Song Li, Kechao Zhou (2018). A Nanomicellar Prodrug Carrier Based on Ibuprofen-Conjugated Polymer for Co-delivery of Doxorubicin. Frontiers in Pharmacology.DOI
Yupeng Ma, Hang Luo, Ru Guo, Kechao Zhou, Dou Zhang (2018). Enhanced performance in multilayer-structured nanocomposites using BaTiO3 and Ba0.8Sr0.2TiO3 decorated graphene hybrids. Ceramics International.DOI
Hehao Chen, Xiaofeng Wang, Fengdan Xue, Yujuan Huang, Kechao Zhou, Dou Zhang (2018). 3D printing of SiC ceramic: Direct ink writing with a solution of preceramic polymers. Journal of the European Ceramic Society.DOI
Yaping Lv, Shaojun Li, Xiaoyong Zhang, Chao Chen, Kechao Zhou (2018). Effects of strain rate on grain boundary evolution in Ti-55531 alloy. Materials Science and Technology.DOI
Chengwu Zhu, Chuqi Jiang, Shou Chen, Ruiqiong Mei, Xin Wang, Jun Cao, Li Ma, Bo Zhou, Qiuping Wei, Guangqi Ouyang, Zhiming Yu, Kechao Zhou (2018). Ultrasound enhanced electrochemical oxidation of Alizarin Red S on boron doped diamond(BDD) anode:Effect of degradation process parameters. Chemosphere.DOI
Shaojun Li, Yaping Lv, Xiaoyong Zhang, Kechao Zhou (2018). Relationship between Flow Behavior and Microstructure Evolution during Isothermal Compression of near β Titanium Alloy Ti-55531 with Acicular Starting Microstructure. Metals.DOI
Wentao Ye, Qiuping Wei, Long Zhang, Haichao Li, Jingting Luo, Li Ma, Zejun Deng, Cheng‐Te Lin, Kechao Zhou (2018). Macroporous diamond foam: A novel design of 3D interconnected heat conduction network for thermal management. Materials & Design.DOI
Lu Wang, Hang Luo, Xuefan Zhou, Anqi Wei, Kechao Zhou, Zhuo Chen, Dou Zhang (2018). Enhanced permittivity and energy density of P(VDF-HFP)-based capacitor using core-shell structured BaTiO3@TiO2 fillers. Ionics.DOI
Xin Yuan, Yi Kang, Jun Zuo, Youneng Xie, Li Ma, Xuelei Ren, Zeyu Bian, Qiuping Wei, Kechao Zhou, Xiyang Wang, Zhiming Yu (2018). Micro/nano hierarchical structured titanium treated by NH4OH/H2O2 for enhancing cell response. PLoS ONE.DOI
Wei Chen, Chao Chen, Xuhui Zi, Xiaofan Cheng, Xiaoyong Zhang, Yong Cheng Lin, Kechao Zhou (2018). Controlling the microstructure and mechanical properties of a metastable β titanium alloy by selective laser melting. Materials Science and Engineering A.DOI
Hang Luo, Zhong Wu, Xuefan Zhou, Zhongna Yan, Kechao Zhou, Dou Zhang (2018). Enhanced performance of P(VDF-HFP) composites using two-dimensional BaTiO3 platelets and graphene hybrids. Composites Science and Technology.DOI
Gengming Zhang, Chao Chen, Xiaojun Wang, Pengwei Wang, Xiaoyong Zhang, Xueping Gan, Kechao Zhou (2018). Additive manufacturing of fine-structured copper alloy by selective laser melting of pre-alloyed Cu-15Ni-8Sn powder. The International Journal of Advanced Manufacturing Technology.DOI
Ruidi Li, Pengda Niu, Tiechui Yuan, Peng Jun Cao, Chao Chen, Kechao Zhou (2018). Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical property. Journal of Alloys and Compounds.DOI
Xuguang Lv, Hang Luo, Sheng Chen, Xianghui Han, Chao Ma, Xuefan Zhou, Weiwei Liu, Zhong Wu, Kechao Zhou, Dou Zhang (2018). BaTiO3 platelets and poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) hybrid composites for energy storage application. Mechanical Systems and Signal Processing.DOI
Yongfeng Song, Xuhui Zi, Yingdong Fu, Xiongbing Li, Chao Chen, Kechao Zhou (2018). Nondestructive testing of additively manufactured material based on ultrasonic scattering measurement. Measurement.DOI
Jinkun Xiao, Wei Zhang, Li-Ming Liu, Xueping Gan, Kechao Zhou, Chao Zhang (2018). Microstructure and tribological properties of plasma sprayed Cu-15Ni-8Sn coatings. Surface and Coatings Technology.DOI
Fengdan Xue, Kechao Zhou, Ning Wu, Hang Luo, Xiaofeng Wang, Xuefan Zhou, Zhongna Yan, Isaac Abrahams, Dou Zhang (2018). Porous SiC ceramics with dendritic pore structures by freeze casting from chemical cross-linked polycarbosilane. Ceramics International.DOI
Ru Guo, Hang Luo, Weiwei Liu, Xuefan Zhou, Lin Tang, Kechao Zhou, Dou Zhang (2018). High energy density in PVDF nanocomposites using an optimized nanowire array. Physical Chemistry Chemical Physics.DOI
Liangjian Chen, Tian CHEN, Jun Cao, Beilei Liu, Chunsheng Shao, Kechao Zhou, Dou Zhang (2018). Effect of Tb/Mg doping on composition and physical properties of hydroxyapatite nanoparticles for gene vector application. Transactions of Nonferrous Metals Society of China.DOI
Yi Kang, Xuelei Ren, Xin Yuan, Li Ma, Youneng Xie, Zeyu Bian, Jun Zuo, Xiyang Wang, Zhiming Yu, Kechao Zhou, Qiuping Wei (2018). The Effects of Combined Micron‐Scale Surface and Different Nanoscale Features on Cell Response. Advances in Materials Science and Engineering.DOI
Lu Wang, Kong Wen-Jie, LUO Hang, ZHOU Xue-Fan, Kechao Zhou, ZHANG Dou (2018). Dielectric and Energy Storage Property of Dielectric Nanocomposites with BaTiO3 Nanofibers. Journal of Inorganic Materials.DOI
Shizhong Zhang, Xueping Gan, Jinjuan Cheng, Yexin Jiang, Zhou Li, Kechao Zhou (2017). Effect of applied load on transition behavior of wear mechanism in Cu−15Ni−8Sn alloy under oil lubrication. Journal of Central South University.DOI
欧阳亦，甘雪萍，张世忠，李周，周科朝，姜业欣，张县委（2017）. 粉末冶金法结合热挤压制备Cu-15Ni-8Sn-0.3Nb合金的时效硬化行为与显微组织（英文）. Transactions of Nonferrous Metals Society of China.
王国慧，付华，周科朝，赵颜忠，朱晒红（2017）. 纳米针状表面改性的仿生多孔钛植入体及体外成骨性能（英文）. Transactions of Nonferrous Metals Society of China.
Dou Zhang, Weiwei Liu, Ru Guo, Kechao Zhou, Hang Luo (2017). High Discharge Energy Density at Low Electric Field Using an Aligned Titanium Dioxide/Lead Zirconate Titanate Nanowire Array. Advanced Science.DOI
Xuhui Zi, Chao Chen, Xiaojun Wang, Pengwei Wang, Xiaoyong Zhang, Kechao Zhou (2017). Spheroidisation of tungsten powder by radio frequency plasma for selective laser melting. Materials Science and Technology.DOI
Chuying Yu, Giuseppe Viola, Dou Zhang, Kechao Zhou, Vladimı́r Koval, Amit Mahajan, Rory M. Wilson, Nadezda V. Tarakina, Isaac Abrahams, Haixue Yan (2017). Phase evolution and electrical behaviour of samarium-substituted bismuth ferrite ceramics. Journal of the European Ceramic Society.DOI
Liguo Zu, Ji‐Si Wu, Xinli Liu, Lei Zhang, Kechao Zhou (2017). Porous NiCu alloy with tailored pore structure and mechanical property fabricated by freezing casting. Materials Research Express.DOI
Huiwen Xiong, Yuxue Wu, Zhiyou Li, Xueping Gan, Kechao Zhou, Liyuan Chai (2017). Comparison of Ti(C, N)-based cermets by vacuum and gas-pressure sintering: Microstructure and mechanical properties. Ceramics International.DOI
Huiwen Xiong, Yu Xiang Guo, Zhiyou Li, Kechao Zhou (2017). New production of (Ti, W)C-based cermets toughened by in-situ formed WC and twinned (Ti, W)C platelets: Carbonization of the Nix(Ti0.6, W0.4)4C-type η phases. Journal of Alloys and Compounds.DOI
Anqi Wei, Chao Chen, Lin Tang, Kechao Zhou, Dou Zhang (2017). Chemical solution deposition of ferroelectric Sr:HfO2 film from inorganic salt precursors. Journal of Alloys and Compounds.DOI
Siyao Xie, Ruidi Li, Tiechui Yuan, Chao Chen, Kechao Zhou, Bo Song, Yusheng Shi (2017). Laser cladding assisted by friction stir processing for preparation of deformed crack-free Ni-Cr-Fe coating with nanostructure. Optics & Laser Technology.DOI
Yunlu Jiang, Zejun Deng, Bo Zhou, Qiuping Wei, Hangyu Long, Yijia Wang, Jiaxin Li, Naixiu Hu, Li Ma, Cheng‐Te Lin, Zhiming Yu, Kechao Zhou (2017). Nickel-induced transformation of diamond into graphite and carbon nanotubes and the electron field emission properties of resulting composite films. Applied Surface Science.DOI
Shenghua Deng, Ruidi Li, Tiechui Yuan, Siyao Xie, Mei Zhang, Kechao Zhou, Peng Jun Cao (2017). Direct current-enhanced densification kinetics during spark plasma sintering of tungsten powder. Scripta Materialia.DOI
Yi Ouyang, Xueping Gan, Shizhong Zhang, Zhou Li, Kechao Zhou, Yexin Jiang, Xianwei Zhang (2017). Age-hardening behavior and microstructure of Cu-15Ni-8Sn-0.3Nb alloy prepared by powder metallurgy and hot extrusion. Transactions of Nonferrous Metals Society of China.DOI
Guohui Wang, Hua FU, Yanzhong Zhao, Kechao Zhou, Shaihong Zhu (2017). Bone integration properties of antibacterial biomimetic porous titanium implants. Transactions of Nonferrous Metals Society of China.DOI
Dou Zhang, Chao Ma, Xuefan Zhou, Sheng Chen, Hang Luo, Chris Bowen, Kechao Zhou (2017). High Performance Capacitors Using BaTiO3 Nanowires Engineered by Rigid Liquid-crystalline Polymers. The Journal of Physical Chemistry C.DOI
Mavlanjan Rahman, Kechao Zhou, Yao-zhuang Nie, Guang‐hua Guo (2017). Electronic structure and magnetism of layered compounds SrBO2 (B = Ni, Co, Mn): A theoretical investigation. Solid State Communications.DOI
Guohui Wang, Hua FU, Kechao Zhou, Yanzhong Zhao, Shaihong Zhu (2017). Nanospike surface-modified bionic porous titanium implant and in vitro osteogenic performance. Transactions of Nonferrous Metals Society of China.DOI
Yi Ouyang, Xueping Gan, Zhou Li, Kechao Zhou, Shizhong Zhang, Yexin Jiang, Xianwei Zhang (2017). Microstructure evolution of a Cu-15Ni-8Sn-0.8Nb alloy during prior deformation and aging treatment. Materials Science and Engineering A.DOI
Qiao Huang, Hang Luo, Chao Chen, Kechao Zhou, Dou Zhang (2017). Improved energy density and dielectric properties of P(VDF-HFP) composites with TiO2 nanowire clusters. Journal of Electroceramics.DOI
Yu Liu, Yongfeng Song, Xiongbing Li, Chao Chen, Kechao Zhou (2017). Evaluating the reinforcement content and elastic properties of Mg-based composites using dual-mode ultrasonic velocities. Ultrasonics.DOI
Mang Ni, Chao Chen, Xiaojun Wang, Pengwei Wang, Ruidi Li, Xiaoyong Zhang, Kechao Zhou (2017). Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing. Materials Science and Engineering A.DOI
Yijia Wang, Qiuping Wei, Zhiming Yu, Hangyu Long, Zejun Deng, Youneng Xie, Jiaxin Li, Cheng‐Te Lin, Li Ma, Kechao Zhou (2017). Field emission properties of the caterpillar-like structural carbon film grown by magnetic and electric fields coupling HFCVD. Applied Surface Science.DOI
Ruidi Li, Minbo Wang, Tiechui Yuan, Bo Song, Chao Chen, Kechao Zhou, Peng Jun Cao (2017). Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties. Powder Technology.DOI
Jiaxin Li, Yijia Wang, Qiuping Wei, Youneng Xie, Hangyu Long, Zejun Deng, Li Ma, Zhiming Yu, Yunlu Jiang, Naixiu Hu, Kechao Zhou (2017). Plasma-enhanced synthesis of carbon nanocone arrays by magnetic and electric fields coupling HFCVD. Surface and Coatings Technology.DOI
Yaping Lv, Shaojun Li, Xiaoyong Zhang, Zhiyou Li, Kechao Zhou (2017). Modeling and Finite Element Analysis for the Dynamic Recrystallization Behavior of Ti-5Al-5Mo-5V-3Cr-1Zr Near β Titanium Alloy During Hot Deformation. High Temperature Materials and Processes.DOI
Fuwen Chen, Guanglong Xu, Xiaoyong Zhang, Kechao Zhou (2017). Isothermal kinetics of β ↔ α transformation in Ti-55531 alloy influenced by phase composition and microstructure. Materials & Design.DOI
Chao Jiang, Xuefan Zhou, Kechao Zhou, Mingliang Wu, Dou Zhang (2017). Synthesis of Na0.5Bi0.5TiO3 whiskers and their nanoscale piezoelectricity. Ceramics International.DOI
Guang-Wei Peng, Xueping Gan, Yexin Jiang, Zhou Li, Kechao Zhou (2017). Effect of dynamic strain aging on the deformation behavior and microstructure of Cu-15Ni-8Sn alloy. Journal of Alloys and Compounds.DOI
Zhiqiang Hu, Zejun Deng, Qiuping Wei, Ting Kai Zhao, Yijia Wang, Zhiming Yu, Li Ma, Kechao Zhou (2017). Roles of Al-doped ZnO (AZO) modification layer on improving electrochemical performance of LiNi1/3Co1/3Mn1/3O2 thin film cathode. Ionics.DOI
Xi Yuan, Song He Zhu, Xian‐Fang Li, Chao Chen, Kechao Zhou, Dou Zhang (2017). Mechanical performance of piezoelectric fiber composites and electroelastic field concentration near the electrode edges. Materials & Design.DOI
Xi Yuan, Ziqi Chen, Mingliang Wu, Hang Luo, Chao Chen, Kechao Zhou, Dou Zhang (2017). A novel thickness polarized d15 shear piezoelectric fiber composites. Sensors and Actuators A Physical.DOI
Dou Zhang, Weiwei Liu, Lin Tang, Kechao Zhou, Hang Luo (2017). High performance capacitors via aligned TiO2 nanowire array. Applied Physics Letters.DOI
Huiwen Xiong, Zhiyou Li, Xueping Gan, Liyuan Chai, Kechao Zhou (2017). High-energy ball-milling combined with annealing of TiC powders and its influence on the microstructure and mechanical properties of the TiC-based cermets. Materials Science and Engineering A.DOI
Dou Zhang, Xuefan Zhou, James I. Roscow, Kechao Zhou, Lu Wang, Hang Luo, Chris Bowen (2017). Significantly Enhanced Energy Storage Density by Modulating the Aspect Ratio of BaTiO3 Nanofibers. Scientific Reports.DOI
Mingliang Wu, Xi Yuan, Hang Luo, Haiyan Chen, Chao Chen, Kechao Zhou, Dou Zhang (2017). Enhanced actuation performance of piezoelectric fiber composites induced by incorporated BaTiO 3 nanoparticles in epoxy resin. Physics Letters A.DOI
Chao Chen, Yan Zhang, Jing Cheng Zeng, Fuqiang Zhang, Kechao Zhou, Chris Bowen, Dou Zhang (2017). Aligned macroporous TiO2/chitosan/reduced graphene oxide (rGO) composites for photocatalytic applications. Applied Surface Science.DOI
Fuwen Chen, Guanglong Xu, Xiaoyong Zhang, Kechao Zhou, Yuwen Cui (2017). Effect of α morphology on the diffusional β ↔ α transformation in Ti–55531 during continuous heating: Dissection by dilatometer test, microstructure observation and calculation. Journal of Alloys and Compounds.DOI
Hang Luo, James I. Roscow, Xuefan Zhou, Sheng Chen, Xianghui Han, Kechao Zhou, Dou Zhang, Chris Bowen (2017). Ultra-high discharged energy density capacitor using high aspect ratio Na 0.5 Bi 0.5 TiO 3 nanofibers. Journal of Materials Chemistry A.DOI
Jingjing Liao, Hehao Chen, Hang Luo, Xiaofeng Wang, Kechao Zhou, Dou Zhang (2017). Direct ink writing of zirconia three-dimensional structures. Journal of Materials Chemistry C.DOI
Mavlanjan Rahman, Kechao Zhou, Qinglin Xia, Yao-zhuang Nie, Guang‐hua Guo (2017). Spin-dependent transport properties of zigzag phosphorene nanoribbons with oxygen-saturated edges. Physical Chemistry Chemical Physics.DOI
Na Liu, Hekang Zhu, Qiuping Wei, Hangyu Long, Zejun Deng, Zhiming Yu, Youneng Xie, Jian Wang, Li Ma, Kechao Zhou (2017). A Niobium and Nitrogen Co-Doped DLC Film Electrode and Its Electrochemical Properties. Journal of The Electrochemical Society.DOI
Chao Jiang, Dou Zhang, Kechao Zhou, Haixue Yan, Hangfeng Zhang, Isaac Abrahams (2017). Topochemical transformation of two-dimensional single crystalline Na 0.5 Bi 0.5 TiO 3 –BaTiO 3 platelets from Na 0.5 Bi 4.5 Ti 4 O 15 precursors and their piezoelectricity. Journal of Materials Chemistry A.DOI
王立鹏，张涛，张雷，吴集思，王艳，周科朝（2016）. 泡沫铜/聚酰亚胺互穿型复合材料的制备及其热稳定性和力学与摩擦性能（英文）. Transactions of Nonferrous Metals Society of China.
Ke-Chao Zhou, Li Ma, Qiu-Ping Wei, Zhi-ming Yu, Long Zhang, Wen-Tao Ye, Yue-Feng Zhang (2016). Different-dimensionality high-heat-conductivity material enhanced and polymer based composite and preparation method thereof.
Ke-Chao Zhou, Li Ma, Qiu-Ping Wei, Zhi-ming Yu, Long Zhang, Wen-Tao Ye, Yue-Feng Zhang (2016). Composite enhanced through coupling of flaky and linear thermal conductive materials and preparation method.
Li Ma, Qiu-Ping Wei, Ke-Chao Zhou, Zhi-ming Yu, Zhi-you Li, Long Zhang, Wen-Tao Ye (2016). Superhigh-thermal-conductivity continuous diamond skeleton reinforced composite material and preparation method.
Leiming Yan, Ji‐Si Wu, Lei Zhang, Xinli Liu, Kechao Zhou, Bo Su (2016). Pore structures and mechanical properties of porous titanium scaffolds by bidirectional freeze casting. Materials Science and Engineering C.DOI
Qiao Huang, Hang Luo, Chao Chen, Xuefan Zhou, Kechao Zhou, Dou Zhang (2016). Enhanced energy density in P(VDF-HFP) nanocomposites with gradient dielectric fillers and interfacial polarization. Journal of Alloys and Compounds.DOI
Wen‐jie Yang, Jie Guo, Jing Li, Gang Zhang, Liu‐qing He, Kechao Zhou (2016). A self‐repairing cermet anode: Preparation and corrosion behavior of (Cu–Ni–Fe)/NiFe 2 O 4 cermet with synergistic action. Journal of the American Ceramic Society.DOI
Jinkun Xiao, Li-Ming Liu, Chao Zhang, Lei Zhang, Kechao Zhou (2016). Sliding electrical contact behavior of brass fiber brush against coin-silver and Au plating. Wear.DOI
Wenmiao Zeng, Xueping Gan, Zhiyou Li, Kechao Zhou (2016). Effect of TiC addition on the microstructure and mechanical properties of TiN-based cermets. Ceramics International.DOI
Wenmiao Zeng, Xueping Gan, Zhiyou Li, Kechao Zhou (2016). Effect of WC addition on the microstructure and mechanical properties of TiN-based cermets. Ceramics International.DOI
Rui Shi Xie, Xiao‐Feng Wang, Guowen Peng, Tian Xie, Dou Zhang, Kechao Zhou, Guoji Huang, Guoping Wang, Hongqing Wang (2016). A modified gelcasting approach to fabricate microscale randomized 1–3 piezoelectric arrays. Ceramics International.DOI
Xuefan Zhou, Chao Jiang, Hang Luo, Chao Chen, Kechao Zhou, Dou Zhang (2016). Enhanced piezoresponse and electric field induced relaxor-ferroelectric phase transition in NBT-0.06BT ceramic prepared from hydrothermally synthesized nanoparticles. Ceramics International.DOI
Chao Chen, Anqi Wei, Yanhong Li, Kechao Zhou, Dou Zhang (2016). Improved tunable properties of Co doped Ba0.8Sr0.2TiO3 thin films prepared by sol-gel method. Journal of Alloys and Compounds.DOI
Li-peng WANG, Tao Zhang, Lei Zhang, Ji‐Si Wu, Yan Wang, Kechao Zhou (2016). Thermostability, mechanical and tribological behaviors of polyimide matrix composites interpenetrated with foamed copper. Transactions of Nonferrous Metals Society of China.DOI
Jian Wang, Xueping Gan, Zhiyou Li, Kechao Zhou (2016). Microstructure and gas sensing property of porous spherical In2O3 particles prepared by hydrothermal method. Powder Technology.DOI
Fuwen Chen, Guanglong Xu, Xiaoyong Zhang, Kechao Zhou (2016). Exploring the Phase Transformation in β-Quenched Ti-55531 Alloy During Continuous Heating via Dilatometric Measurement, Microstructure Characterization, and Diffusion Analysis. Metallurgical and Materials Transactions A.DOI
Qiyao Xiao, Kechao Zhou, Chao Chen, Mingxiang Jiang, Yan Zhang, Hang Luo, Dou Zhang (2016). Hollow and porous hydroxyapatite microspheres prepared with an O/W emulsion by spray freezing method. Materials Science and Engineering C.DOI
Lejun Zhou, Wanlin Wang, Kechao Zhou (2016). A Study of the Heat Transfer Behavior of Mold Fluxes with Different Amounts of Al2O3. Metals.DOI
Xiujuan Lin, Shifeng Huang, Kechao Zhou, Dou Zhang (2016). The influence of structural parameters on the actuation performance of piezoelectric fiber composites. Materials & Design.DOI
Hang Luo, Kechao Zhou, Chris Bowen, Fuqiang Zhang, Anqi Wei, Zhong Wu, Chao Chen, Dou Zhang (2016). Building Hierarchical Interfaces Using BaSrTiO3 Nanocuboid Dotted Graphene Sheets in an Optimized Percolative Nanocomposite with Outstanding Dielectric Properties. Advanced Materials Interfaces.DOI
Wenmiao Zeng, Xueping Gan, Zhiyou Li, Kechao Zhou (2016). The preparation of silicon nitride ceramics by gelcasting and pressureless sintering. Ceramics International.DOI
Li Ma, Long Zhang, Pengyu Zhao, Naixiu Hu, Zhenzhi Gong, Wentao Ye, Quiping Wei, Kechao Zhou, Zhiming Yu, Yuefeng Zhang (2016). A new design of composites for thermal management: Aluminium reinforced with continuous CVD diamond coated W spiral wires. Materials & Design.DOI
Hang Luo, Zhong Wu, Chao Chen, Chao Ma, Kechao Zhou, Dou Zhang (2016). Methoxypolyethylene glycol functionalized carbon nanotube composites with high permittivity and low dielectric loss. Composites Part A Applied Science and Manufacturing.DOI
Chunfang Feng, Yan Wang, Chen Wu, Lei Zhang, Kechao Zhou (2016). The Mechanical Mixed Layer and Its Role in Cu-15Ni-8Sn/Graphite Composites. Tribology Transactions.DOI
Jianming Ruan, Hailin Yang, Xiaojun Weng, Jinglei Miao, Kechao Zhou (2016). Preparation and characterization of biomedical highly porous Ti–Nb alloy. Journal of Materials Science Materials in Medicine.DOI
Chao Jiang, Xuefan Zhou, Kechao Zhou, Chao Chen, Hang Luo, Xi Yuan, Dou Zhang (2016). Grain oriented Na 0.5 Bi 0.5 TiO 3 -BaTiO 3 ceramics with giant strain response derived from single-crystalline Na 0.5 Bi 0.5 TiO 3 -BaTiO 3 templates. Journal of the European Ceramic Society.DOI
Wei Ma, Renzhi Ma, Jinghua Wu, Pengzhan Sun, Xiaohe Liu, Kechao Zhou, Takayoshi Sasaki (2016). Development of efficient electrocatalysts via molecular hybridization of NiMn layered double hydroxide nanosheets and graphene. Nanoscale.DOI
Chao Jiang, Dou Zhang, Kechao Zhou, Xuefan Zhou, Hang Luo, Isaac Abrahams (2016). Significantly enhanced energy storage density of sandwich-structured (Na 0.5 Bi 0.5 ) 0.93 Ba 0.07 TiO 3 /P(VDF–HFP) composites induced by PVP-modified two-dimensional platelets. Journal of Materials Chemistry A.DOI
Xuefan Zhou, Chao Jiang, Chao Chen, Hang Luo, Kechao Zhou, Dou Zhang (2016). Morphology control and piezoelectric response of Na 0.5 Bi 0.5 TiO 3 synthesized via a hydrothermal method. CrystEngComm.DOI
谢鑫林，张雷，肖金坤，钱志源，张涛，周科朝（2015）. AuAgCu电刷与Au镀层的滑动电接触性能（英文）. Transactions of Nonferrous Metals Society of China.
马莉，张龙，李小斌，李志友，周科朝（2015）. NiFe2O4尖晶石涂层用纳米Ni-Fe合金的电沉积制备与表征（英文）. Transactions of Nonferrous Metals Society of China.
Li Ma, Tong Chang, Xiaobing Li, Zhiyou Li, Dou Zhang, Kechao Zhou (2015). Cathodic electrophoretic deposition of α-Fe2O3 coating. Journal of Central South University.DOI
李景夫，张雷，肖金坤，周科朝（2015）. 石墨烯和石墨增强铜基复合材料的摩擦磨损性能（英文）. Transactions of Nonferrous Metals Society of China.
Li Ma, Qiu-Ping Wei, Ke-Chao Zhou, Zhi-ming Yu, Zhi-you Li (2015). Metal-based composite material enhanced by three-dimensional networked diamond framework as well as preparation method.
Beilei Liu, Liangjian Chen, Chunsheng Shao, Fuqiang Zhang, Kechao Zhou, Jun Cao, Dou Zhang (2015). Improved osteoblasts growth on osteomimetic hydroxyapatite/BaTiO3 composites with aligned lamellar porous structure. Materials Science and Engineering C.DOI
Jingfu Li, Lei Zhang, Jinkun Xiao, Kechao Zhou (2015). Sliding wear behavior of copper-based composites reinforced with graphene nanosheets and graphite. Transactions of Nonferrous Metals Society of China.DOI
Chen Wu, Yan Wang, Lei Zhang, Chunfang Feng, Kechao Zhou (2015). The Effect of Hot Extrusion on Mechanical and Tribological Behavior of Ag-Cu/MoS2Composites. Tribology Transactions.DOI
Huiwen Xiong, Yu Xiang Guo, Yu Wen, Yaping Lv, Zhiyou Li, Kechao Zhou (2015). Large-scale synthesis of TiC whiskers by carbothermal reduction with microcrystalline cellulose as the carbon source. Journal of Crystal Growth.DOI
Yan Wang, Lei Zhang, Jinkun Xiao, Wu Chen, Chunfang Feng, Xueping Gan, Kechao Zhou (2015). The tribo-corrosion behavior of Cu-9wt% Ni-6wt% Sn alloy. Tribology International.DOI
Xinlin Xie, Lei Zhang, Jinkun Xiao, Zhi-yuan QIAN, Tao Zhang, Kechao Zhou (2015). Sliding electrical contact behavior of AuAgCu brush on Au plating. Transactions of Nonferrous Metals Society of China.DOI
Ruidi Li, Tiechui Yuan, Xiaojun Liu, Kechao Zhou (2015). Enhanced atomic diffusion of Fe–Al diffusion couple during spark plasma sintering. Scripta Materialia.DOI
Kechao Zhou, Hai‐Long Pei, Jinkun Xiao, Lei Zhang (2015). Micro‐scratch behavior of WC particle‐reinforced copper matrix composites. Rare Metals.DOI
Chao Chen, Hourong Zhuang, Xiaona Zhu, Kechao Zhou, Dou Zhang (2015). Enhancement of relaxor properties by Nb doping in Ba0.8Sr0.12Ca0.08TiO3 lead-free ferroelectric ceramics. Ceramics International.DOI
Hang Luo, Dou Zhang, Chao Jiang, Xi Yuan, Chao Chen, Kechao Zhou (2015). Improved Dielectric Properties and Energy Storage Density of Poly(vinylidene fluoride-co-hexafluoropropylene) Nanocomposite with Hydantoin Epoxy Resin Coated BaTiO3. ACS Applied Materials & Interfaces.DOI
Lejun Zhou, Wanlin Wang, Kechao Zhou (2015). Effect of Al2O3 on the Crystallization of Mold Flux for Casting High Al Steel. Metallurgical and Materials Transactions E.DOI
Huiwen Xiong, Zhiyou Li, Kechao Zhou (2015). Synthesis and Growth Mechanism of TiC Whiskers by Carbothermal Reduction of Titania/Microcrystalline Cellulose. Journal of the American Ceramic Society.DOI
Kaihua Shi, Kechao Zhou, Zhiyou Li, Dou Zhang, Xiuqi Zan (2015). Microstructure and formation process of Ni-pool defect in WC–8Ni cemented carbides. Transactions of Nonferrous Metals Society of China.DOI
Xingxing Wang, Bingchu Yang, Kechao Zhou, Dou Zhang, Zhiyou Li, Conghua Zhou (2015). Ordered porous TiO2 films obtained by freezing and the application in dye sensitized solar cells. Current Applied Physics.DOI
Chao Jiang, Kechao Zhou, Xuefan Zhou, Zhiyou Li, Dou Zhang (2015). Synthesis and characterization of Na0.5Bi0.5TiO3 platelets with preferred orientation using Aurivillius precursors. Ceramics International.DOI
Guohui Wang, Yanzhong Zhao, Juan Tan, Shaihong Zhu, Kechao Zhou (2015). Arginine functionalized hydroxyapatite nanoparticles and its bioactivity for gene delivery. Transactions of Nonferrous Metals Society of China.DOI
Jing Wang, Suping Huang, Kun HU, Kechao Zhou, Hong Yuan Sun (2015). Effect of cetyltrimethylammonium bromide on morphology and porous structure of mesoporous hydroxyapatite. Transactions of Nonferrous Metals Society of China.DOI
Chao Chen, Hourong Zhuang, Xiaona Zhu, Dou Zhang, Kechao Zhou, Haixue Yan (2015). Effect of Ca substitution sites on dielectric properties and relaxor behavior of Ca doped barium strontium titanate ceramics. Journal of Materials Science Materials in Electronics.DOI
Wei Ma, Renzhi Ma, Chengxiang Wang, Jianbo Liang, Xiaohe Liu, Kechao Zhou, Takayoshi Sasaki (2015). A Superlattice of Alternately Stacked Ni–Fe Hydroxide Nanosheets and Graphene for Efficient Splitting of Water. ACS Nano.DOI
Kaihua Shi, Kechao Zhou, Zhiyou Li, Xiuqi Zan, Kailin Dong, Qing Jiang (2015). Microstructure and properties of ultrafine WC–Co–VC cemented carbides with different Co contents. Rare Metals.DOI
Hang Luo, Dou Zhang, Lu Wang, Chao Chen, Jing Zhou, Kechao Zhou (2015). Highly enhanced dielectric strength and energy storage density in hydantoin@BaTiO 3 –P(VDF-HFP) composites with a sandwich-structure. RSC Advances.DOI
Lejun Zhou, Wanlin Wang, Juan Wei, Kechao Zhou (2015). Melting and Heat Transfer Behavior of Fluorine-Free Mold Fluxes for Casting Medium Carbon Steels. ISIJ International.DOI
Lejun Zhou, Wanlin Wang, Kechao Zhou (2015). Viscosity and Crystallization Behavior of F-free Mold Flux for Casting Medium Carbon Steels. ISIJ International.DOI
Hang Luo, Chao Chen, Kechao Zhou, Xuefan Zhou, Zhong Wu, Dou Zhang (2015). Enhancement of dielectric properties and energy storage density in poly(vinylidene fluoride-co-hexafluoropropylene) by relaxor ferroelectric ceramics. RSC Advances.DOI
Li Ma, Long Zhang, Xiaobing Li, Zhiyou Li, Kechao Zhou (2015). Fabrication and characterization of electrodeposited nanocrystalline Ni–Fe alloys for NiFe2O4 spinel coatings. Transactions of Nonferrous Metals Society of China.DOI
Luying Luo, Chao Chen, Hang Luo, Ye Zhang, Kechao Zhou, Dou Zhang (2015). The effects of precursors on the morphology and microstructure of potassium sodium niobate nanorods synthesized by molten salt synthesis. CrystEngComm.DOI
Haiyan Chen, Lin Xiu-juan, Ziqi Chen, Kechao Zhou, ZHANG Dou (2015). Influence of TiO$lt;inf$gt;2$lt;/inf$gt; Content on the Tensile and Actuation Properties of Piezoelectric Fiber Composites. Journal of Inorganic Materials.DOI
Kechao Zhou, Jinkun Xiao, Lei Zhang, Xinlin Xie, Zhiyou Li (2014). Tribological behavior of brass fiber brush against copper, brass, coin-silver and steel. Wear.DOI
Song He Zhu, Dou Zhang, Kechao Zhou, Xian‐Fang Li (2014). Effects of nonhomogeneity on singular electroelastic field near electrodes for a functionally graded piezoelectric material. European Journal of Mechanics - A/Solids.DOI
Kaihua Shi, Kechao Zhou, Z.-Y. Li, Xiangting Liu, X.-Q. Zan (2014). Effect of Cryogenic Treatment on Thermal Behavior of WC-9Ni-xCeO2Cemented Carbides. Materials and Manufacturing Processes.DOI
Xiujuan Lin, Haiyan Chen, Chao Jiang, Kechao Zhou, Dou Zhang (2014). Effect of electrode finger width on the strain and stress distributions in macro fiber composites. International Journal of Applied Electromagnetics and Mechanics.DOI
Min Yu, Kechao Zhou, Zhiyou Li, Dou Zhang (2014). Preparation, characterization and in vitro gentamicin release of porous HA microspheres. Materials Science and Engineering C.DOI
Qiuping Wei, Xiong-wei ZHANG, Liu Dan-ying, Jie Li, Kechao Zhou, Dou Zhang, Zhiming Yu (2014). Effects of sputtering pressure on nanostructure and nanomechanical properties of AlN films prepared by RF reactive sputtering. Transactions of Nonferrous Metals Society of China.DOI
Ruidi Li, Tiechui Yuan, Zili Qiu, Kechao Zhou, Jinglong Li (2014). Nanostructured Co–Cr–Fe alloy surface layer fabricated by combination of laser clad and friction stir processing. Surface and Coatings Technology.DOI
Peng Fei Huang, Pengfei Rong, Albert J. Jin, Xuefeng Yan, Molly Gu Zhang, Jing Lin, Hao Hu, Zhe Wang, Xuyi Yue, Wanwan Li, Gang Niu, Wenbin Zeng, Wei Wang, Kechao Zhou, Xiaoyuan Chen (2014). Dye‐Loaded Ferritin Nanocages for Multimodal Imaging and Photothermal Therapy. Advanced Materials.DOI
Kaihua Shi, Kechao Zhou, Zhiyou Li, Xiuqi Zan (2014). Optimization of Initial WC Grain-Size Distribution in WC-6Ni Cemented Carbides. Journal of Materials Engineering and Performance.DOI
Huiquan Cao, Zhiyuan Qian, Lei Zhang, Jinkun Xiao, Kechao Zhou (2014). Tribological Behavior of Cu Matrix Composites Containing Graphite and Tungsten Disulfide. Tribology Transactions.DOI
Rui Xie, Zhao Yang, Kechao Zhou, Dou Zhang, Yu Wang, Helen Lai Wah Chan (2014). Fabrication of Fine‐Scale 1–3 Piezoelectric Arrays by Aqueous Gelcasting. Journal of the American Ceramic Society.DOI
Min Yu, Kechao Zhou, Fuqiang Zhang, Dou Zhang (2014). Porous HA microspheres as drug delivery: Effects of porosity and pore structure on drug loading and in vitro release. Ceramics International.DOI
Ke Wang, Xueping Gan, Zhiyou Li, Dou Zhang, Kechao Zhou (2014). Rheological properties of ITO slurries prepared from nano-powders for gelcasting process. Ceramics International.DOI
Lei Liu, Pingge He, Kechao Zhou, Tengfei Chen (2014). Microwave absorption properties of carbon fibers with carbon coils of different morphologies (double microcoils and single nanocoils) grown on them. Journal of Materials Science.DOI
Jing Cheng Zeng, Yan Zhang, Kechao Zhou, Dou Zhang (2014). Effects of alcohol additives on pore structure and morphology of freeze-cast ceramics. Transactions of Nonferrous Metals Society of China.DOI
Yan Zhang, Liangjian Chen, Jing Cheng Zeng, Kechao Zhou, Dou Zhang (2014). Aligned porous barium titanate/hydroxyapatite composites with high piezoelectric coefficients for bone tissue engineering. Materials Science and Engineering C.DOI
Zhang Ye, Yun Jiang, Xiujuan Lin, Rui Xie, Kechao Zhou, Tim W Button, Dou Zhang (2014). Fine‐Scaled Piezoelectric Ceramic/Polymer 2‐2 Composites for High‐Frequency Transducer. Journal of the American Ceramic Society.DOI
Wei Ma, Yanfeng Guo, Xiaohe Liu, Dan Zhang, Tao Liu, Renzhi Ma, Kechao Zhou, Guanzhou Qiu (2014). ChemInform Abstract: Nickel Dichalcogenide Hollow Spheres: Controllable Fabrication, Structural Modification, and Magnetic Properties. ChemInform.DOI
Wei Ma, Renzhi Ma, Jianbo Liang, Chengxiang Wang, Xiaohe Liu, Kechao Zhou, Takayoshi Sasaki (2014). Layered zinc hydroxide nanocones: synthesis, facile morphological and structural modification, and properties. Nanoscale.DOI
Zhi Qi Huang, Kechao Zhou, Dou Zhang (2014). Porous Hydroxyapatite Scaffolds with Unidirectional Macrochannels Prepared via Ice/Fiber-Templated Method. Materials and Manufacturing Processes.DOI
Wei Ma, Yanfeng Guo, Xiaohe Liu, Dan Zhang, Tao Liu, Renzhi Ma, Kechao Zhou, Guanzhou Qiu (2013). Nickel Dichalcogenide Hollow Spheres: Controllable Fabrication, Structural Modification, and Magnetic Properties. Chemistry - A European Journal.DOI
Haiyan Chen, Xiujuan Lin, Dou Zhang, Kechao Zhou (2013). Optimization of electrode finger width in piezoelectric fiber composites. Symposium on Piezoelectricity, Acoustic Waves and Device Applications.DOI
Ye Zhang, Xiujuan Lin, Kechao Zhou, Dou Zhang (2013). Fabrication of fine-scaled PZT/epoxy composites for medical imaging applications. Symposium on Piezoelectricity, Acoustic Waves and Device Applications.DOI
Xiujuan Lin, Kechao Zhou, Song He Zhu, Ziqi Chen, Dou Zhang (2013). The electric field, dc bias voltage and frequency dependence of actuation performance of piezoelectric fiber composites. Sensors and Actuators A Physical.DOI
Yiya Zhang, Kechao Zhou, Jing Cheng Zeng, Dou Zhang (2013). Control of pore structures and sizes in freeze cast ceramics. Advances in Applied Ceramics Structural Functional and Bioceramics.DOI
Lei Liu, Kechao Zhou, Pingge He, Tengfei Chen (2013). Synthesis and microwave absorption properties of carbon coil–carbon fiber hybrid materials. Materials Letters.DOI
Jinkun Xiao, Lei Zhang, Kechao Zhou, Jianguo Li, Xinlin Xie, Zhiyou Li (2013). Anisotropic friction behaviour of highly oriented pyrolytic graphite. Carbon.DOI
Chao Jiang, Dou Zhang, Xueping Gan, Rui Xie, Fuqiang Zhang, Kechao Zhou (2013). Preparation of high performance AlN/Hydantion composite by gelcasting and infiltration processes. Ceramics International.DOI
Lei Liu, Pingge He, Kechao Zhou, Tengfei Chen (2013). Microwave absorption properties of helical carbon nanofibers-coated carbon fibers. AIP Advances.DOI
Zhouguang Lu, Xinxin Tan, Yougen Tang, Kechao Zhou (2013). LiNi 0.7 Co 0.15 Mn 0.15 O 2 microspheres as high‐performance cathode materials for lithium‐ion batteries. Rare Metals.DOI
Xiujuan Lin, Kechao Zhou, Tim W Button, Dou Zhang (2013). Fabrication, characterization, and modeling of piezoelectric fiber composites. Journal of Applied Physics.DOI
Qiuping Wei, Taimin Yang, Kechao Zhou, Li Ma, P. Zheng, Jie Li, Dou Zhang, Li Zhou, Zhaoju Yu (2013). Effect of sputtered Mo interlayers on Si (100) substrates for the deposition of diamond film by hot filament chemical vapor deposition. Surface and Coatings Technology.DOI
Min Yu, Kechao Zhou, Yan Zhang, Dou Zhang (2013). Porous Al2O3 microspheres prepared by a novel ice-templated spray drying technique. Ceramics International.DOI
Chao Jiang, Xueping Gan, Dou Zhang, Rui Xie, Kechao Zhou (2013). Gelcasting of aluminum nitride ceramics using hydantion epoxy resin as gelling agent. Ceramics International.DOI
Rui Xie, Kechao Zhou, Xueping Gan, Dou Zhang (2013). Effects of Epoxy Resin on Gelcasting Process and Mechanical Properties of Alumina Ceramics. Journal of the American Ceramic Society.DOI
Chao Li, Xiaoyong Zhang, Zhiyou Li, Kechao Zhou (2013). Hot Deformation of Ti-5Al-5Mo-5V-1Cr-1Fe Near β Titanium Alloys Containing Thin and Thick Lamellar α Phase. Materials Science and Engineering A.DOI
Zhi Qi Huang, Kechao Zhou, Dan Lei, Zhiyou Li, Yan Zhang, Dou Zhang (2013). Fabrication of CaSiO 3 bioceramics with open and unidirectional macro-channels using an ice/fiber-templated method. Ceramics International.DOI
Xiujuan Lin, Kechao Zhou, Xiaoyong Zhang, Dou Zhang (2013). Development, modeling and application of piezoelectric fiber composites. Transactions of Nonferrous Metals Society of China.DOI
Bo Liu, Xuewen Chen, Yuehui He, Lu Xiao, Yongfang Li, Kechao Zhou, Ling Fan, Yingping Zou (2013). Alkyl substituted naphtho[1, 2-b: 5, 6-b′]difuran as a new building block towards efficient polymer solar cells. RSC Advances.DOI
Lei Zhang, Jinkun Xiao, Kechao Zhou (2012). Sliding Wear Behavior of Silver–Molybdenum Disulfide Composite. Tribology Transactions.DOI
Dou Zhang, Yan Zhang, Rui Xie, Kechao Zhou (2012). Freeze gelcasting of aqueous alumina suspensions for porous ceramics. Ceramics International.DOI
Xueping Gan, Kechao Zhou, Wenbin Hu, Dou Zhang (2012). Role of additives in electroless copper plating using hypophosphite as reducing agent. Surface and Coatings Technology.DOI
Fang Liu, Kechao Zhou (2012). Effect of Molybdenum-Rich Carbides on Wear Behavior of Powder Metallurgy Steel. MATERIALS TRANSACTIONS.DOI
Kechao Zhou (2012). Effect of load on friction and wear behavior of AuNi9/Au coating tribo-couple. The Chinese Journal of Nonferrous Metals.
Kechao Zhou (2012). Monte carlo simulation for dissolution-precipitation process of particle in liquid phase. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2012). Preparation of hollow iron particle by reducing Fe_2O_3 aggregate. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2012). Oxidation behavior of NiFe_2O_4 based cermets with high metal content at 880 ℃ in air. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2012). Effect of silver alloy particle size on friction and wear properties of Ag-MoS_2 composites. The Chinese Journal of Nonferrous Metals.
Bin Zhang, Xiaoyong Zhang, Chao Li, Kechao Zhou (2012). Molecular Dynamics Simulation on Phase Transformation of Ti-Al Alloy with Low Al Content. 《稀有金属材料与工程》.DOI
Kaihua Shi, Kechao Zhou, Zhiyou Li, Xiuqi Zan, Shang-zhi Xu, Zhao-yu Min (2012). Effect of adding method of Cr on microstructure and properties of WC–9Ni–2Cr cemented carbides. International Journal of Refractory Metals and Hard Materials.DOI
Yuqiang Tao, Zhiyou Li, Lei Zhang, Xueping Gan, Kechao Zhou (2012). Preparation of Nickel Ferrite–Copper Composite by Pressureless Infiltration. Journal of the American Ceramic Society.DOI
Yan Zhang, Kechao Zhou, Yinxiang Bao, Dou Zhang (2012). Effects of rheological properties on ice-templated porous hydroxyapatite ceramics. Materials Science and Engineering C.DOI
Kaihua Shi, Kechao Zhou, Lei Zhang, Zhiyou Li (2012). Microstructure characterization of NiFe2O4-NiO solid-solid diffusion couple. Journal of Central South University.DOI
Chao Li, Xiaoyong Zhang, Kechao Zhou, Chao-qun Peng (2012). Relationship between lamellar α evolution and flow behavior during isothermal deformation of Ti–5Al–5Mo–5V–1Cr–1Fe near β titanium alloy. Materials Science and Engineering A.DOI
Jinkun Xiao, Lei Zhang, Kechao Zhou, Xinping Wang (2012). Microscratch behavior of copper–graphite composites. Tribology International.DOI
Wei Ma, Gen Chen, Dan Zhang, Kechao Zhou, Guanzhou Qiu, Xiaohe Liu (2012). Biomolecule-assisted hydrothermal synthesis and properties of manganese sulfide hollow microspheres. Journal of Physics and Chemistry of Solids.DOI
Yuqiang Tao, Zhiyou Li, Dou Zhang, Huiwen Xiong, Kechao Zhou (2012). Microstructural Evolution of a Nickel Ferrite–Copper Alloy Cermet During Sintering and High‐Temperature Oxidation. Journal of the American Ceramic Society.DOI
Yuqiang Tao, Zhiyou Li, Kechao Zhou (2012). Effects of debinding atmosphere on the microstructure and sintering densification of nickel ferrite. Ceramics International.DOI
Rui Shi Xie, Dou Zhang, Xiaoyong Zhang, Kechao Zhou, Tim W Button (2012). Gelcasting of alumina ceramics with improved green strength. Ceramics International.DOI
Li Ma, Ke-Chao Zhou, Zhi-you Li, Lei Zhang (2011). Synthesis of (Ni, Co)Fe2O4-Spinel Coating Using High Temperature Oxidation Treatment of Ni-Co-Fe2O3Composite Electrodeposited Coating.DOI
Li Ma, Ke-Chao Zhou, Lei Zhang, Zhi-you Li (2011). A Study on the Oxidation Behavior of Nickel Coatings with Different Grain Sizes and Preferred Orientations.DOI
Baogang Liu, Lei Zhang, Kechao Zhou, Zhiyou Li, Hao Wang (2011). ChemInform Abstract: Electrical Conductivity and Molten Salt Corrosion Behavior of Spinel Nickel Ferrite. ChemInform.DOI
Li Ma, Kechao Zhou, Zhiyou Li, Qiuping Wei, Lei Zhang (2011). Hot corrosion of a novel NiO/NiFe2O4 composite coating thermally converted from the electroplated Ni–Fe alloy. Corrosion Science.DOI
Baogang Liu, Lei Zhang, Kechao Zhou, Zhiyou Li, Hao Wang (2011). Electrical conductivity and molten salt corrosion behavior of spinel nickel ferrite. Solid State Sciences.DOI
Kechao Zhou, Li Ma, Zhiyou Li (2011). Oxidation behaviors of electrodeposited nickel-cobalt coatings in air at 960 °C. Transactions of Nonferrous Metals Society of China.DOI
Liu Jian-yuan, Zhiyou Li, Yu-Qiang Tao, Dou Zhang, Kechao Zhou (2011). Phase evolution of 17(Cu-10Ni)-(NiFe2O4-10NiO) cermet inert anode during aluminum electrolysis. Transactions of Nonferrous Metals Society of China.DOI
Li Ma, Kechao Zhou, Zhiyou Li (2011). Hot corrosion of a novel (Ni,Co)O/(Ni,Co)Fe2O4 composite coating thermally converted from an electrodeposited Ni–Co–Fe2O3 composite coating. Corrosion Science.DOI
Hanbing He, Hanning Xiao, Kechao Zhou (2011). Effect of additive BaO on corrosion resistance of xCu/(10NiO-NiFe2O4) cermet inert anodes for aluminum electrolysis. Transactions of Nonferrous Metals Society of China.DOI
Kechao Zhou, Yuqiang Tao (2011). Research development of nickel ferrite based cermet inert anode materials. The Chinese Journal of Nonferrous Metals.
Kechao Zhou, Yuqiang Tao, Baogang Liu, Zhiyou Li (2011). Enhanced sintering and molten salt corrosion behavior of nickel ferrite based cermets. The Chinese Journal of Nonferrous Metals.
Kechao Zhou (2011). Preparation of Fe_2O_3 films by electrophoretic deposition and its sintering densification. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2011). Preparation of nickel/graphite composite powder by electroless nickel plating. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2011). Effect of CoO doping on electrical conductivity of 15(20Ni-Cu)/(NiO-NiFe_2O_4) based cermets. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2011). Effect of sintering process on densification procedure and microstructures of NiFe_2O_4-10NiO dual-phase ceramic. Materials Science and Engineering of Powder Metallurgy.
Li Ma, Kechao Zhou, Zhiyou Li, Qiuping Wei (2010). Electrodeposition of Ni-Co-Fe2O3 composite coatings. Journal of Central South University of Technology.DOI
Baogang Liu, Kechao Zhou, Zhiyou Li, Dou Zhang, Lei Zhang (2010). Microstructure and DC electrical conductivity of spinel nickel ferrite sintered in air and nitrogen atmospheres. Materials Research Bulletin.DOI
Kechao Zhou (2010). Effect of spray drying technology on characteristics of NiFe_2O_4-10NiO/xM composite ceramic powder. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2010). Modified Monte Carlo simulation of normal grain growth considering energy barrier for mass transition. The Chinese Journal of Nonferrous Metals.
Xueping Gan, Zhiyou Li, Zhan-qiu TAN, Kechao Zhou (2009). Influence of Yb2O3 addition on microstructure and corrosion resistance of 10Cu/(10NiO-NiFe2O4) cermets. Transactions of Nonferrous Metals Society of China.DOI
Hanbing He, Zhiyou Li, Kechao Zhou, Baiyun Huang (2009). Effect of BaO addition on relative density and electric conductivity of xNi/10NiO-NiFe2O4 cermets. Journal of Central South University of Technology.DOI
Kechao Zhou (2009). Research progress of phosphate inorganic binder for high temperature resistance. Materials Science and Engineering of Powder Metallurgy.
Kechao Zhou (2009). Investigation of Ni-S coating electrode electrodeposited on foam nickel. Journal of Functional Biomaterials.
Kechao Zhou (2009). Effect of adding BaO on electrical conductivity of 10NiO-NiFe_2O_4 composite ceramics. Journal of Functional Biomaterials.
Hanbing He, Kechao Zhou, Zhiyou Li, Baiyun Huang (2008). Effect of BaO addition on electric conductivity of xCu/10NiO-NiFe2O4 cermets. Transactions of Nonferrous Metals Society of China.DOI
Tiechui Yuan, Kechao Zhou, Ruidi Li (2008). Effect of Pr2O3 on the microstructure and hydrogen evolution property of nickel sulphur coatings electrodeposited on the nickel foam substrate. Materials Letters.DOI
Hanbing He, Baiyun Huang, Zhiyou Li, Kechao Zhou (2008). Effect of BaO doping on densification of 10NiO-NiFe_2O_4 composite ceramics. The Chinese Journal of Nonferrous Metals.
Kechao Zhou (2008). Thermal debinder technology for cermet compacts of inert anode. Journal of Central South University(Science and Technology).
Kechao Zhou (2008). Effect of CaO doping methods on densification and microstructure of 10NiO-NiFe_2O_4 ceramics. Materials Science and Engineering of Powder Metallurgy.
Tiechui Yuan, Ruidi Li, Kechao Zhou (2007). Electrocatalytic properties of Ni-S-Co coating electrode for hydrogen evolution in alkaline medium. Transactions of Nonferrous Metals Society of China.DOI
Kechao Zhou (2007). Research Progress in Metal Inert Anodes. Cailiao daobao.
Kechao Zhou (2007). Preparation and properties of 17(xNi-Cu)/(NiFe_2O_4-10NiO) cermet. Materials Science and Engineering of Powder Metallurgy.
Lei Zhang, Kechao Zhou, Zhiyou Li, Wenjie Yang (2006). Microstructural evolution of NiFe2O4-10NiO powder prepared by high temperature solid state reaction. Transactions of Nonferrous Metals Society of China.DOI
Hanwei He, Hongjiang Liu, Fang Liu, Kechao Zhou (2006). Structures and electrochemical properties of amorphous nickel sulphur coatings electrodeposited on the nickel foam substrate as hydrogen evolution reaction cathodes. Surface and Coatings Technology.DOI
Kechao Zhou (2006). Comparison of Oxidation-resistance Property Between Two Kinds of Ni-Fe Alloys. Mining and Metallurgical Engineering.
Shaihong Zhu, Guohui Wang, Yanzhong Zhao, Yiming Li, Kechao Zhou, Baiyun Huang (2005). Biocompatibility of MIM 316L stainless steel. Journal of Central South University of Technology.DOI
Hanwei He, Hongjiang Liu, Fang Liu, Kechao Zhou (2005). Distribution of sulphur and electrochemical properties of nickel sulphur coatings electrodeposited on the nickel foam as hydrogen evolution reaction cathodes. Materials Letters.DOI
Kechao Zhou (2005). Progress in Studies on the NiFe_2O_4 Spinel Based Cermet Inert Anodes. Cailiao daobao.
Kechao Zhou (2005). Effect of sulphosalicylic acid on structures and electrochemical properties of nickel sulphur alloy coatings. The Chinese Journal of Nonferrous Metals.
Kechao Zhou (2005). Overview of the Supersolidous Liquid Phase Singtering of Powder Metallurgy High Speed Steel. Cailiao daobao.
Kechao Zhou (2005). Densification and properties of iron-based sintering material with high content of alloying elements.
Fengxiao Liu, Yong Liu, Baiyun Huang, Yuehui He, Kechao Zhou (2004). Fabrication of FeAl/TiC composites through reactive hot pressing. Journal of Central South University of Technology.DOI
Kechao Zhou (2004). Development of particulate reinforced steel matrix composite.
Kechao Zhou (2004). New powder metallurgy technologies of producing titanium alloys.
Kechao Zhou (2004). Effect on microstructure of NiFe base/NiFe_2O_4 cermet with different way of adding metals.
Kechao Zhou (2004). Advance in inert anode for aluminum electrolysis.
Ke-Chao Zhou (2003). Experimental and Numerical Studies of Process of Powder Mixing.
Jiancheng Tang, Baiyun Huang, Wensheng Liu, Yuehui He, Kechao Zhou, Aihua Wu, Kun Cheng Peng, Wen Qin, Youwei Du (2003). A high ductility TiAl alloy made by two-step heat treatment. Materials Research Bulletin.DOI
Yong Liu, Wei-feng Wei, Kechao Zhou, Lifang Chen, Hui-pin Tang (2003). Microstructures and mechanical behavior of PM Ti-Mo alloy. Journal of Central South University of Technology.DOI
Kechao Zhou (2003). Research on oxidation-resistance property of Ni-Fe-X alloys.
Kechao Zhou (2003). Preparation of FeAl/TiC composites by reactive hot pressing.
Kechao Zhou (2003). Corrosion-resistance of rapidly solidified aluminum alloys.
Jiancheng Tang, Baiyun Huang, Yuehui He, Wensheng Liu, Kechao Zhou, Aihua Wu (2002). Hall–Petch relationship in two-phase TiAl alloys with fully lamellar microstructures. Materials Research Bulletin.DOI
Junhong Zhang, Baiyun Huang, Yuehui He, Kechao Zhou, Li-ping Meng (2002). Physical simulation of hot deformation of TiAl based alloy. Journal of Central South University of Technology.DOI
Jiancheng Tang, Baiyun Huang, Kechao Zhou, Wensheng Liu, Yong Liu, Yuehui He (2001). Effect of Al content on the lamellar spacing in two-phase TiAl alloys. Journal of Materials Science Letters.DOI
Jiancheng Tang, Baiyun Huang, Kechao Zhou, Wensheng Liu, Yuehui He, Yong Liu (2001). Factors affecting the lamellar spacing in two-phase TiAl alloys with fully lamellar microstructures. Materials Research Bulletin.DOI
Yong Liu, Fengxiao Liu, Baiyun Huang, Kechao Zhou, Chuanfu Zhang (2001). Microstructural evolution of TiAl base alloy during three-stepped thermo-mechanical treatment. Journal of Central South University of Technology.DOI
Jianxun Chen, Baiyun Huang, Kechao Zhou, Qing Zheng (2000). Effects of HIPing pressure on microstructures and properties of TiAl alloy. Journal of Central South University of Technology.DOI
Kening Chen, Chengpeng Zhu, Junyang He, Xiao-Yong Zhang, Kechao Zhou. Unexpected strengthening and toughening effects of B minor alloying in a new low-density near-α titanium alloy. Scripta Materialia.DOI
预印本
Di Qiang, Jianling Liu, Zhongliang Shu, Qin Zhang, Yifan Chen, Changshu Xiang, Yu GUO, Chao Chen, Kechao Zhou (2026). Multi-Objective Optimization of Cu-Cr-Nb Alloy in Electron Beam Melting with Efficiency-Ratio-Calibrated Uncertainty Penalization.DOI
Peng Pan, Jianling Liu, Xuan Deng, Chao Chen, Guohua Wang, Jiang Liu, Junjie Chen, Lu Gao, Yanqin Lu, xianglong Li, Hong Kun Wu, Yufeng Zheng, Kechao Zhou (2025). Unveiling the Twin-Induced Evolution of Heterostructure with Enhanced Uniform Elongation in a High-Strength Biodegradable Zn Alloy Via Rotary Swaging. SSRN Electronic Journal.DOI
Miao Song, Dingri Zhang, Dan Leng, Jaewon Lee, Ziang Yang, Jiaxuan Chen, Dan Li, Lei Wang, Gang Zhou, Rui Yang, Kechao Zhou (2024). In-situ atomic observations unveil the aggregation growth and evolution of five-fold twin structures. Research Square.DOI
Chao Chen, Yaoqin Gan, Dan Li, Ziwei Yang, Rou Ding, Yiyou Wu, Kechao Zhou (2024). Microstructure, Mechanical Properties and Electrical Conductivity of Heat-Resistant Al-Ce and Al-Ni Eutectic Alloys. SSRN Electronic Journal.DOI
Yong He, Huiwen Xiong, Kechao Zhou, Xiao Kang, Lei Zhang (2024). Enhancing Thermal, Oxidation and Corrosion Resistance of Ni-Fe Cermet with High Entropy Spinel Oxide Reinforcements for High-Temperature Electrolysis. SSRN Electronic Journal.DOI
Fu Yang, Mengxiong Chen, Heng Zou, Huiwen Xiong, Xiao Kang, Lei Zhang, Kechao Zhou (2024). Integrated High-Density and Dimensional Accuracy of Thick-Walled Cermet by Compression Molding Process. SSRN Electronic Journal.DOI
Fu Yang, Mengxiong Chen, Heng Zou, Huiwen Xiong, Lei Zhang, Kechao Zhou (2024). Integrated High-Density and Dimensional Accuracy of Geometrically Complex Cermet by Rheological Press Molding. SSRN Electronic Journal.DOI
Yong He, Lei Zhang, Kechao Zhou, Xiao Kang (2023). Fabrication and Characterization of Novel High Entropy Spinel Oxides for Reduced Magnetization, Thermal Conductivity and Thermal Expansion. SSRN Electronic Journal.DOI
Dan Li, Chao Chen, Xiaochun Liu, Kechao Zhou (2022). Additive Manufactured High Strength Al-Mg Alloy Through Well-Controlled Hierarchical Precipitation at Sub-Micro to Nano-Scale. SSRN Electronic Journal.DOI
Ruitong Zhu, Zejun Deng, Li Ma, Kechao Zhou, Qiuping Wei, Zhiming Yu (2021). A Nanoporous Single Diamond Particle Microelectrode and Its In Situ Surface Modification. SSRN Electronic Journal.DOI
Jinqiang Gao, Wentao Deng, Ye Tian, Lianshan Ni, Baowei Wang, Kang‐Yu Zou, Yingchang Yang, Ying Wang, Craig Edward Banks, Dou Zhang, Kechao Zhou, Guoqiang Zou, Hongshuai Hou, Xiaobo Ji (2021). Robust Na 3V 2(PO 4) 2F 3 Cross-Linked Full Sodium-Ion Batteries. SSRN Electronic Journal.DOI
书籍章节
Yan Wang, Lei Zhang, Hongfei Zhai, Hongxia Gao, Kechao Zhou (2019). Tribological behavior of Cu-15Ni-8Sn/graphite under sea water, distilled water and dry-sliding conditions. Journal of Central South University.DOI