Qi Ouyang, Wen Shao, Jinyuan Tang, Xin Li, Wenlong Du (2026). Grease thermal elastohydrodynamic lubrication analysis of planetary roller screw mechanism with machined roughness and eccentric error. International Communications in Heat and Mass Transfer.DOI
Tianci Zhang, Jinglong Chen, Zhisheng Ye, Wenting Liu, Jinyuan Tang (2025). Prior knowledge-informed multi-task dynamic learning for few-shot machinery fault diagnosis. Expert Systems With Applications, Vol. 271.DOI
Zhiyao Zhou, Longting Chen, Jinyuan Tang (2025). Fault Diagnosis of Rotating Machinery Based on CHK‐Optimized MOMEDA. IET Signal Processing.DOI
Ze-Min Zhao, Tian-Ci Zhang, Kang Xu, Jinyuan Tang, Yudian Yang (2025). Integrated Explainable Diagnosis of Gear Wear Faults Based on Dynamic Modeling and Data-Driven Representation. Italian National Conference on Sensors.DOI
Tian-Ci Zhang, Jing-Long Chen, Zhisheng Ye, Wenting Liu, Jinyuan Tang (2025). Self-supervised contrastive learning with scale-sensitive receptive fields for machine fault diagnosis under sharp speed variation. Measurement science and technology.DOI
Kaiqi Huang, Cheng Hong, Zhiliang Deng, Jingbo Shen, Jinyuan Tang, Yuqin Wen (2025). A regularised reconstruction and contact modelling method for asperities based on real machined surface topography. Precision engineering.DOI
Han-Bin Zhou, Longting Chen, Fu-Jia Xia, Danni Li, Jinyuan Tang, Ke Feng (2024). Three-dimensional colour reconstruction of aviation spiral bevel gear tooth surface through fusion of image and point cloud information. Measurement science and technology.DOI
Yuqin Wen, Zhou Wei, Jinyuan Tang (2024). Modeling and experimental research on rough tooth surface contact fatigue calculation considering hardness gradient and residual stress. Friction.DOI
Chong-Yang Zhao, Yizhuo Liu, Zhenzhou Wang, Ji-Shan Han, Bo Zhao, Jinyuan Tang (2024). Research on a novel non-uniform and asymmetric ultrasonic vibration system. Measurement science and technology.DOI
Yuqin Wen, Wei Zhou, Jinyuan Tang (2024). Research on the correlation between roughness parameters and contact stress on tooth surfaces and its dominant characteristics. Measurement.DOI
Yuqin Wen, Zhou Wei, Jinyuan Tang (2024). Composite effects of residual stress and hardness gradient on contact fatigue performance of rough tooth surfaces and optimization design of detailed characteristic parameters. Engineering Failure Analysis.DOI
W. Shao, Yi-Hui Hou, Jinyuan Tang, Qingsong Liu, H. Ding, Zheng-Min Li (2023). On the predictive modeling of surface micro-topography in vibratory polishing of aeronautic gear considering initial workpiece topography. The International Journal of Advanced Manufacturing Technology.DOI
J. Wen, Jinyuan Tang, Wei-Hua Zhou, Wei-Wei Huang, Jiu-Yue Zhao, Yu Dai (2023). A Novel Integrated Model for Heat Source and Temperature Field in Gear Profile Grinding. Social Science Research Network.DOI
J. Wen, Jinyuan Tang, W. Shao, Wei-Hua Zhou, Wei-Wei Huang (2023). Towards Understanding Subsurface Characteristics in Burn Process of Gear Profile Grinding. Materials.DOI
H. Ding, Kaibin Rong, Bi-Yun Song, S. Rong, Zhen-Yu Zhou, Jinyuan Tang (2023). Contact Pattern Expansion Regulation Model for Spiral Bevel Gear Transmission. Social Science Research Network.DOI
C. Chu, Yuansheng Zhou, Jun-Hao Zhang, Jinyuan Tang (2023). Computational approaches for improving machining precision in five-axis flank milling of spiral bevel gears. Computers & industrial engineering.DOI
Wei-Hua Zhou, Jinyuan Tang, Zhuanye Li, W. Shao, J. Wen, Wei-Wei Huang (2023). Study on scratch hardness in ultrasonic vibration-assisted scratching based on instantaneous contact analysis. Wear.DOI
Tian-Cheng Li, Jinyuan Tang, Zehua Hu, Zhiwei Wang, Zhengyu Fu (2023). Three-dimensional vibration investigation of the thin web gear pair based on Timoshenko beam. Thin-walled structures.DOI
Zhou Sun, Jinyuan Tang, Si-Yu Chen, Haonan Li, Xuan Tao, Zehua Hu (2023). Dynamical modeling and characteristics analysis of tooth spalling in gear system with weight reduction structure. Mechanism and Machine Theory.DOI
Hua-Ming Liu, Jiu-Yue Zhao, Jinyuan Tang, W. Shao, Beier Sun (2023). Simulation and Experimental Verification of Die Quenching Deformation of Aviation Carburized Face Gear. Materials.DOI
Xiannian Kong, Jinyuan Tang, Zehua Hu, H. Ding, Zhi-Wei Wang, Qi-Bo Wang (2023). Dynamic modeling and vibration analysis of spur gear system considering thin-walled gear and hollow shaft. Mechanism and Machine Theory.DOI
Xiannian Kong, Jinyuan Tang, Zehua Hu, Qi-Bo Wang, H. Ding (2023). A fast and efficient mesh stiffness model for spur gears considering thin-walled or oblique web. Journal of Vibration and Control.DOI
Zhaoyang Tian, Zehua Hu, Jinyuan Tang, Si-Yu Chen, Xiannian Kong, Zhiwei Wang, Jian-Ge Zhang, H. Ding (2023). Dynamical modeling and experimental validation for squeeze film damper in bevel gears. Mechanical systems and signal processing.DOI
J. Wen, Yuansheng Zhou, Jinyuan Tang, Yu Dai (2023). An Effective Analytical Approach to Predicting the Surface Contact Temperature of the Face Gear Drives. Mathematics.DOI
Yuan-Ying Xiao, Longting Chen, Si-Yu Chen, Zehua Hu, Jinyuan Tang (2023). Intelligent fault diagnosis of gear crack based on side frequency feature under different working conditions. Measurement science and technology.DOI
Zhen-Yu Zhou, Jin-Li Pang, Fantao Gao, S. Lu, Jiu-Yue Zhao, Jinyuan Tang, H. Ding (2023). Digital visualization of time-varying local bearing contact recognition for non-orthogonal aviation spiral bevel gears. Advanced Engineering Informatics.DOI
Han Ding, Shifeng Rong, Kainbin Rong, Jinyuan Tang (2022). Sensitive misalignment-based dynamic loaded meshing impact diagnosis mechanism for aviation spiral bevel gear transmission. Expert Systems With Applications, Vol. 200.DOI
C. Chu, Yuansheng Zhou, En-Meng Liu, Jinyuan Tang (2022). Optimal tool path generation and cutter geometry design for five-axis CNC flank milling of spiral bevel gears. Journal of Computational Design and Engineering.DOI
Kaibin Rong, H. Ding, S. Rong, Longting Chen, Jinyuan Tang (2022). Digital Twin Modeling for Non-Orthogonal Aviation Spiral Bevel Gear Loaded Meshing Transmission. Social Science Research Network.DOI
Xian-Lei Guan, Jinyuan Tang, Zehua Hu, Qing-Shan Wang, Xiannian Kong (2022). A new dynamic model of light-weight spur gear transmission system considering the elasticity of the shaft and gear body. Mechanism and Machine Theory.DOI
Jinyuan Tang, Fu-Jia Xia, Duo Yang, Chunqing Xiao (2022). Novel method for numerical reconstruction of grinding surfaces with specified roughness parameter set. Surface Topography Metrology and Properties.DOI
Duo Yang, Jinyuan Tang, Fu-Jia Xia, Wei Zhou (2022). Surface Roughness Characterization and Inversion of Ultrasonic Grinding Parameters based on Support Vector Machine. Journal of tribology.DOI
Zhongwei Tang, Yuansheng Zhou, Shenghui Wang, Jiang Zhu, Jinyuan Tang (2022). An innovative geometric error compensation of the multi-axis CNC machine tools with non-rotary cutters to the accurate worm grinding of spur face gears. Mechanism and Machine Theory.DOI
Xiannian Kong, Jinyuan Tang, Zehua Hu, Si-Yu Chen, Qi-Bo Wang (2022). A new approach for analyzing internal load and fatigue life of deep groove ball bearing in high-speed gearbox system. Journal of Vibration and Control.DOI
Xue-Lin Chen, Jinyuan Tang, W. Shao, Bo Hu, Jinxiang Ye (2022). An Analytical and Experimental Study on Cutting Characteristics and Transient Cutting Force Modeling in Feed Directional Ultrasonic Vibration-Assisted Cutting of High Strength Alloys. Materials.DOI
Wei-Wei Huang, Jinyuan Tang, Wei-Hua Zhou, W. Shao, M. Yi, Xing Zhao, J. Wen (2022). Revealing nanoscale material deformation mechanism and surface/subsurface characteristics in vibration-assisted nano-grinding of single-crystal iron. Applications of Surface Science.DOI
Yu-Hui He, Jiajia Zhang, Wei-Hua Zhou, Jinyuan Tang, Yanwu Xu, Yutong Zhang (2022). Study on force reduction mechanism in ultrasonic-assisted grinding based on single-grain scratching. Archives of Civil and Mechanical Engineering.DOI
Dun-Cai Lei, Longting Chen, Jinyuan Tang (2022). Mining of Weak Fault Information Adaptively Based on DNN Inversion Estimation for Fault Diagnosis of Rotating Machinery. IEEE Access.DOI
Xian-Lei Guan, Jinyuan Tang, Zehua Hu, Qing-Shan Wang (2022). Dynamic analysis of spur gear pair established by flexible ring and time-varying mesh model. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
Sheng-Hong You, Jinyuan Tang (2022). A New Model for Sphere Asperity Contact Analysis Considering Strain Hardening of Materials. Tribology letter.DOI
Wei-Hua Zhou, Jinyuan Tang, W. Shao, J. Wen (2022). Towards understanding the ploughing friction mechanism in ultrasonic assisted grinding with single grain. International Journal of Mechanical Sciences.DOI
Shenghui Wang, Yuansheng Zhou, C. Chu, Jinyuan Tang (2022). Novel kinematic and geometric views for improving tooth contact analysis of spatial gears. Journal of Computational Design and Engineering.DOI
Yutong Zhang, Wei-Hua Zhou, Jinyuan Tang, Yu-Hui He (2022). Understanding Effects of Ultrasonic Vibration on Microstructure Evolution in Hot Forming Process via Cellular Automata Method. Materials.DOI
Shenghui Wang, Yuansheng Zhou, Jinyuan Tang, K. Tang, Zhengminqing Li (2022). Digital tooth contact analysis of face gear drives with an accurate measurement model of face gear tooth surface inspected by CMMs.DOI
Jinyuan Tang, Yu Shi, Jiu-Yue Zhao, Liwei Chen, Zhenyu Wu (2022). Numerical modeling considering initial gradient mechanical properties and experiment verification of residual stress distribution evolution of 12Cr2Ni4A steel generated by ultrasonic surface rolling. Surface & Coatings Technology.DOI
Jinyuan Tang, Ji-Ling Chen, Duo Yang, Lin Li, Jiu-Yue Zhao, Minzhi Guo (2022). A new method of layered superposition reconstruction modeling on grinding-shot peening surfaces. Surface Topography Metrology and Properties.DOI
Yu-Hui He, Yutong Zhang, Wei-Hua Zhou, Jia-Jia Zhang, Jinyuan Tang (2022). Simulation study on the effect of grinding temperature and cooling rate on microstructure evolution of 9310 steel grinding surface. Materials Today Communications.DOI
Ting-Hui Jiang, Wei-Hua Zhou, Jinyuan Tang, Xing Zhao, Jiu-Yue Zhao, Hua-Ming Liu (2022). Constitutive modelling of AISI 9310 alloy steel and numerical calculation of residual stress after shot peening. International Journal of Impact Engineering.DOI
Ji-Ling Chen, Jinyuan Tang, Duo Yang (2022). Study on sensitivity analysis of tooth surface roughness parameters and contact stress. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
Xin-lai Lu, Yuansheng Zhou, Dong He, Fangyan Zheng, Kai Tang, Jinyuan Tang (2022). A novel two-variable optimization algorithm of TCA for the design of face gear drives. Mechanism and Machine Theory.DOI
Haonan Li, Jinyuan Tang, Si-Yu Chen, Kaibin Rong, H. Ding, Rui Lu (2022). Loaded contact pressure distribution prediction for spiral bevel gear. International Journal of Mechanical Sciences.DOI
Shenghui Wang, Bo Hu, Zhenyu Wu, Yuansheng Zhou, Jinyuan Tang (2022). A Comprehensive Optimization Model of Tooth Surface Parameters for the Minimization of Contact Stress of Helical Face Gears by Considering the Avoidance of Edge Contact. Mathematics.DOI
Xin Li, W. Shao, Jinyuan Tang, H. Ding, Wei-Hua Zhou (2022). An Investigation of the Contact Fatigue Characteristics of an RV Reducer Crankshaft, Considering the Hardness Gradients and Initial Residual Stress. Materials.DOI
Jiu-Yue Zhao, Wei-Hua Zhou, Jinyuan Tang, Ting-Hui Jiang, Hua-Ming Liu (2022). Analytical and experimental study on the surface generation mechanism in shot peening. Archives of Civil and Mechanical Engineering.DOI
Yi Yang, Jinyuan Tang, Niao-Qing Hu, G. Shen, Yue-Hao Li, Lun Zhang (2022). Research on the time-varying mesh stiffness method and dynamic analysis of cracked spur gear system considering the crack position. Journal of Sound and Vibration.DOI
Duo Yang, Jinyuan Tang, Fu-Jia Xia, Wei Zhou (2022). Rough Surface Characterization Parameter Set and Redundant Parameter Set for Surface Modeling and Performance Research. Materials.DOI
Shangqian Lu, H. Ding, Kaibin Rong, S. Rong, Jinyuan Tang, Bin Xing (2022). Composite mechanical deformation based semi-analytical prediction model for dynamic loaded contact pressure of thin-walled aerospace spiral bevel gears. Thin-walled structures.DOI
X. Lu, Xing Zhao, Bo Hu, Yuansheng Zhou, Zhe-Zhen Cao, Jinyuan Tang (2022). A Measurement Solution of Face Gears with 3D Optical Scanning. Materials.DOI
J. Wen, Wei-Hua Zhou, Jinyuan Tang, W. Shao (2022). Residual stress evolution for tooth double-flank by gear form grinding. Journal of Manufacturing Processes.DOI
H. Ding, Xiaoping Zou, S. Hua, Zhen-Yu Zhou, Guowen Li, Hua-Ming Liu, Jinyuan Tang (2022). Carburizing effect-inspired bending fatigue forecasting model for spiral bevel gears. International Journal of Mechanical Sciences.DOI
Haonan Li, Si-Yu Chen, Jinyuan Tang, Zhou Sun, You-Wang Hu (2022). Nonlinear dynamic modeling and analysis of spur gear based on gear compatibility conditions. Mechanism and Machine Theory.DOI
H. Ding, S. Rong, Kaibin Rong, Jinyuan Tang, Zhen-Yu Zhou, Jian-Ge Zhang, Guowen Li (2022). Life cycle assessment-driven collaborative optimization model of power dry cutting for face-hobbing hypoid gear production. Journal of Cleaner Production.DOI
Jiu-Yue Zhao, Jinyuan Tang, Wei-Hua Zhou, Ting-Hui Jiang, Hua-Ming Liu (2022). Comprehensive experimental study of shot peening on the surface integrity evolution of 12Cr2Ni4A high-strength steel. The International Journal of Advanced Manufacturing Technology.DOI
Fu-Jia Xia, Jinyuan Tang, Lin Li, Duo Yang, Jiu-Yue Zhao (2022). An improved FFT method for shot peening surface reconstruction.DOI
J. Wen, Jinyuan Tang, Wei-Hua Zhou (2021). Study on formation mechanism and regularity of residual stress in ultrasonic vibration grinding of high strength alloy steel. Journal of Manufacturing Processes.DOI
H. Ding, Yun-Tai Zhang, Hongping Li, Kaibin Rong, Jinyuan Tang, Si-Yu Chen (2021). Bending fatigue life oriented tooth flank dry-grinding tool modification for cleaner manufacturing of spiral bevel gear product. Journal of Cleaner Production.DOI
Kaibin Rong, H. Ding, Bi-Yun Song, Jinhao Gao, Jinyuan Tang (2021). Data-driven process control for manufacturing spiral bevel and hypoid gears by using design for six sigma (DFSS) considering numerical loaded tooth contact analysis (NLTCA).DOI
Zong-Lin Gu, Caichao Zhu, Huai-Ju Liu, Jinyuan Tang (2021). Subsurface stress-field analysis of generating ground helical gear based on finite line-contact mixed elastohydrodynamic lubrication.DOI
Kaibin Rong, H. Ding, Xiannian Kong, Rong Huang, Jinyuan Tang (2021). Digital twin modeling for loaded contact pattern-based grinding of spiral bevel gears. Advanced Engineering Informatics.DOI
Wei Zhou, Dai-Yan Zhao, Jinyuan Tang, J. Yi (2021). A Comparative Study on Asperity Peak Modeling Methods. Chinese Journal of Mechanical Engineering.DOI
Xiannian Kong, H. Ding, Jinyuan Tang, Zehua Hu, Si-Yu Chen (2021). Bearing internal load analysis and fatigue life estimation based on nonlinear dynamic model of a gear system. Journal of Vibration and Control.DOI
H. Ding, Hongping Li, Rong Huang, Jinyuan Tang (2021). Adaptive data-driven prediction and optimization of tooth flank heat treatment deformation for aerospace spiral bevel gears by considering carburizing-meshing coupling effect.DOI
Lin Li, Jinyuan Tang, H. Ding, Dong-ri Liao, Dun-Cai Lei (2021). On the linear transform technique for generating rough surfaces.DOI
Yu-Hui He, Hang Hu, Jinyuan Tang, Zhou Wei (2021). Stress Concentration Calculation Factor of Tooth Root with 3D Rough Profile.
H. Ding, Hongping Li, W. Shao, Jinyuan Tang (2021). Prediction and control for local bearing contact-based collaborative grinding of non-orthogonal aerospace spiral bevel gears.DOI
Dun-Cai Lei, Kaibin Rong, Bi-Yun Song, H. Ding, Jinyuan Tang (2021). Digital twin modeling for tooth surface grinding considering low-risk transmission performance of non-orthogonal aviation spiral bevel gears. ISA transactions.DOI
Duo Yang, Qi-Bo Wang, Jinyuan Tang, Fu-Jia Xia, Wei Zhou, Yuqin Wen (2021). Correlation analysis of roughness surface height distribution parameters and maximum mises stress. Surface Topography Metrology and Properties.DOI
Ji Dong, Jinyuan Tang, Zehua Hu (2021). Dynamic characteristics of the face gear transmission system based on a rotor-shaft-bearing model with multiple nodes. International Journal of Non-Linear Mechanics.DOI
Xue-Lin Chen, Jinyuan Tang, H. Ding, An-Min Liu (2021). Experimental study on the evolution of chip morphology, chip formation, and surface topography with cutting parameters, and their relationships in dry milling of cast aluminum alloy with PCD inserter. Journal of Mechanical Science and Technology.DOI
Duo Yang, Jinyuan Tang, Wei Zhou, Yuqin Wen (2021). Comprehensive study of relationships between surface morphology parameters and contact stress. Journal of Mechanical Science and Technology.DOI
Xiannian Kong, H. Ding, Rong Huang, Jinyuan Tang (2021). Adaptive data-driven modeling, prediction and optimal control for loaded transmission error of helicopter zerol spiral bevel gear transmission system.DOI
Yu-Hui He, Shuang Lu, Jinyuan Tang, Jia-Jia Zhang (2021). Analysis of flow stress and microstructure evolution of 9310 steel during the hot compression. Materials Research Express.DOI
Yuqin Wen, Jinyuan Tang, Wei Zhou, Lin Li, Caichao Zhu (2021). New analytical model of elastic-plastic contact for three-dimensional rough surfaces considering interaction of asperities. Friction.DOI
Hao Xu, Yuansheng Zhou, Yu-Hui He, Jinyuan Tang (2021). An Efficient Approach to the Five-Axis Flank Milling of Non-Ferrous Spiral Bevel Gears. Materials.DOI
Xue-Lin Chen, Jinyuan Tang, H. Ding, An-Min Liu (2021). An accurate transient model for temperature fluctuation on localized shear band in serrated chip formation.DOI
Xue-Lin Chen, Jinyuan Tang, H. Ding, An-Min Liu (2021). A new geometric model of serrated chip formation in high-speed machining. Journal of Manufacturing Processes.DOI
H. Ding, S. Rong, Kaibin Rong, Jinyuan Tang (2021). Semi-FEM dynamic meshing impact forecasting model for spiral bevel gear transmission. Applied Mathematical Modelling.DOI
Jiu-Yue Zhao, Jinyuan Tang, Wei-Hua Zhou, T. Jiang, Hua-Ming Liu, Bin Xing (2021). Numerical modeling and experimental verification of residual stress distribution evolution of 12Cr2Ni4A steel generated by shot peening. Surface & Coatings Technology.DOI
Hua-Ming Liu, Hong-Liang Dong, Jinyuan Tang, H. Ding, W. Shao, Jiu-Yue Zhao, T. Jiang (2021). Numerical modeling and experimental verification of surface roughness of 12Cr2Ni4A alloy steel generated by shot peening.DOI
Yi Yang, Niao-Qing Hu, Jinyuan Tang, Jiao Hu, Lun Zhang, Zhe Cheng (2021). Dynamic analysis for a spur geared rotor system with tooth tip chipping based on an improved time-varying mesh stiffness model.DOI
Jian Dong, Qi-Bo Wang, Jinyuan Tang, Zehua Hu, Xiaoqian Li (2021). Dynamic characteristics and load-sharing performance of concentric face gear split-torque transmission systems with time-varying mesh stiffness, flexible supports and deformable shafts. Meccanica (Milano. Print).DOI
Jiu-Yue Zhao, Jinyuan Tang, H. Ding, W. Shao, Xing Zhao, Hua-Ming Liu, Ting-Hui Jiang (2021). A numerical and experimental investigation on the evolution of three-dimensional surface topography of 12Cr2Ni4A steel in shot peening. Journal of Manufacturing Processes.DOI
Jian Dong, Zehua Hu, Jinyuan Tang, Zhi-Wei Wang, Si-Yu Chen (2021). Investigation of the Vibration Features and Dynamic Load Sharing Characteristics of Concentric Face Gear Torque Split Transmission.DOI
Xianghuan Liu, Yuansheng Zhou, Jinyuan Tang (2020). A comprehensive adaptive approach to calculating the envelope surface of the digital models in CNC machining. Journal Of Manufacturing Systems, Vol. 570.DOI
Jian Dong, Jinyuan Tang, Zehua Hu, Yi Wang (2020). A semi-analytical method of time-varying mesh stiffness in concentric face gear split-torque transmission system.DOI
Haifeng He, Huai-Ju Liu, Caichao Zhu, P. Wei, Jinyuan Tang (2020). Analysis of the fatigue crack initiation of a wind turbine gear considering load sequence effect. International journal of damage mechanics.DOI
Yuqin Wen, Jinyuan Tang, Zhou Wei (2020). Influence of distribution parameters of rough surface asperities on the contact fatigue life of gears. Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology.DOI
Yuqin Wen, Jinyuan Tang, Wei Zhou, Lin Li (2020). A Reconstruction and Contact Analysis Method of Three-Dimensional Rough Surface Based on Ellipsoidal Asperity.DOI
Dun-Cai Lei, Xiannian Kong, Si-Yu Chen, Jinyuan Tang, Zehua Hu (2020). Numerical and experimental investigation of a spur gear pair with unloaded static transmission error.DOI
Zehua Hu, Jinyuan Tang, Qing-Shan Wang, Si-Yu Chen, Lu-Lu Qian (2020). Investigation of nonlinear dynamics and load sharing characteristics of a two-path split torque transmission system. Mechanism and Machine Theory.DOI
Xiannian Kong, Jinyuan Tang, Si-Yu Chen, Zehua Hu (2020). Effects of gearbox housing flexibility on dynamic characteristics of gear transmission system.DOI
Kaibin Rong, H. Ding, Jinyuan Tang (2020). Adaptive data-driven modular control approach to computer aided process planning for manufacturing spiral bevel and hypoid gears. Proceedings of the Institution of mechanical engineers. Part B, journal of engineering manufacture.DOI
Wei-Hua Zhou, Jinyuan Tang, W. Shao (2020). Modelling of surface texture and parameters matching considering the interaction of multiple rotation cycles in ultrasonic assisted grinding.DOI
Lin Li, Jinyuan Tang, Yuqin Wen, Caichao Zhu (2020). Numerical Simulation of Ultrasonic-Assisted Grinding Surfaces With Fast Fourier Transform. Journal of tribology.DOI
Yi Tang, Yu-Hui He, Jinyuan Tang (2020). General modeling method of spiral bevel gear based on universal motion parameters.
Shenghui Wang, Yuansheng Zhou, Xinru Liu, S. Liu, Jinyuan Tang (2020). An Advanced Comprehensive Approach to Accurately Modeling the Face-Milled Generated Spiral Bevel Gears. Journal of Computing and Information Science in Engineering.DOI
W. Shao, M. Yi, Jinyuan Tang, Si-Yuan Sun (2020). Prediction and Minimization of the Heat Treatment Induced Distortion in 8620H Steel Gear: Simulation and Experimental Verification. Chinese Journal of Mechanical Engineering.DOI
Wei-Hua Zhou, Jinyuan Tang, W. Shao (2020). Study on surface generation mechanism and roughness distribution in gear profile grinding.DOI
Shandong Peng, H. Ding, Jinyuan Tang, Yuansheng Zhou (2020). Collaborative machine tool settings compensation considering both tooth flank geometrical and physical performances for spiral bevel and hypoid gears.DOI
Wei-Tao Chen, Si-Yu Chen, Jinyuan Tang, Haonan Li (2020). Stability and bifurcation analysis of a bevel gear system supported by finite-length squeeze film dampers. Nonlinear dynamics.DOI
Kai-Hong Zhou, Jinyuan Tang (2020). Tool Position and Orientation Global Optimization Intrinsic Geometry of Strip-width-maximization Manufacture Technology for Sculptured Surface. Journal of Mechanical Engineering.DOI
H. Ding, Jinyuan Tang (2020). Machine-tool settings driven high-order topology optimization to grinding tooth flank by considering loaded tooth contact pattern for spiral bevel gears.DOI
Xianlin Shi, Yuansheng Zhou, Jinyuan Tang, Zhengminqing Li (2020). An innovative generated approach to dressing the worm for grinding spur face gears.DOI
Duo Yang, Jinyuan Tang, Wei Zhou, Yuqin Wen (2020). Correlation between surface roughness parameters and contact stress of gear. Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology.DOI
W. Qu, H. Ding, Jinyuan Tang (2020). An innovative semi-analytical determination approach to numerical loaded tooth contact analysis (NLTCA) for spiral bevel and hypoid gears. Advances in Engineering Software.DOI
Wei-Tao Chen, Si-Yu Chen, Zehua Hu, Jinyuan Tang, Haonan Li (2020). Dynamic analysis of a bevel gear system equipped with finite length squeeze film dampers for passive vibration control.DOI
Lin Li, Jinyuan Tang, Yuqin Wen, W. Shao (2019). Characterization of ultrasonic-assisted grinding surface via the evaluation of the autocorrelation function. The International Journal of Advanced Manufacturing Technology.DOI
Yuansheng Zhou, Shenghui Wang, Li-Ming Wang, Jinyuan Tang, Zezhong C. Chen (2019). CNC milling of face gears with a novel geometric analysis. Mechanism and Machine Theory.DOI
Yuqin Wen, Jinyuan Tang, Wei Zhou, Caichao Zhu (2019). Study on contact performance of ultrasonic‐assisted grinding surface. Ultrasonics.DOI
Zehua Hu, H. Ding, Shandong Peng, Yi Tang, Jinyuan Tang (2019). Numerical determination to loaded tooth contact performances in consideration of misalignment for the spiral bevel gears. International Journal of Mechanical Sciences.DOI
Shandong Peng, H. Ding, Jinyuan Tang (2019). Accurate numerical computation of loaded tooth surface contact pressure and stress distributions for spiral bevel gears by considering time-varying meshing characteristics. Advances in Engineering Software.DOI
Wei Wang, Huai-Ju Liu, Caichao Zhu, Xue-Song Du, Jinyuan Tang (2019). Effect of the residual stress on contact fatigue of a wind turbine carburized gear with multiaxial fatigue criteria. International Journal of Mechanical Sciences.DOI
Wei Wang, Huai-Ju Liu, Caichao Zhu, Jinyuan Tang, Chenxu Jiang (2019). Evaluation of contact fatigue risk of a carburized gear considering gradients of mechanical properties. Friction.DOI
Shandong Peng, H. Ding, Guan Zhang, Jinyuan Tang, Yi Tang (2019). New determination to loaded transmission error of the spiral bevel gear considering multiple elastic deformation evaluations under different bearing supports. Mechanism and Machine Theory.DOI
Wei-Hua Zhou, Jinyuan Tang, Hai-Feng Chen, W. Shao (2019). A comprehensive investigation of surface generation and material removal characteristics in ultrasonic vibration assisted grinding. International Journal of Mechanical Sciences.DOI
Jian Dong, Jinyuan Tang, Zehua Hu (2019). Investigation of assembly, power direction and load sharing in concentric face gear split-torque transmission system. Meccanica (Milano. Print).DOI
Shenghui Wang, Yuansheng Zhou, Jinyuan Tang, Zhao Xiao (2019). An adaptive geometric meshing theory for the face-milled generated spiral bevel gears. Forschung im Ingenieurwesen.DOI
H. Ding, Jinyuan Tang, W. Shao (2019). Automatic data-driven operation and optimization of uncertain misalignment by considering mechanical power transmission performances of spiral bevel and hypoid gears. Applied Soft Computing.DOI
Huicheng Yi, Yuansheng Zhou, Jinyuan Tang, Zezhong C. Chen (2019). Simulations and error analysis of the CNC milling of a face gear tooth with given tool paths. Data in Brief.DOI
Wei-Tao Chen, Si-Yu Chen, Zehua Hu, Jinyuan Tang, Haonan Li (2019). A novel dynamic model for the spiral bevel gear drive with elastic ring squeeze film dampers. Nonlinear dynamics.DOI
Zehua Hu, H. Ding, Shandong Peng, Jinyuan Tang, Yi Tang (2019). A novel collaborative manufacturing model requiring both geometric and physical evaluations of spiral bevel gears by design for six sigma. Mechanism and Machine Theory.DOI
Haifeng He, Huai-Ju Liu, Caichao Zhu, Jinyuan Tang (2019). Study on the gear fatigue behavior considering the effect of residual stress based on the continuum damage approach. Engineering Failure Analysis.DOI
Xianlin Shi, Yuansheng Zhou, Wu-Ji Zhang, Jinyuan Tang (2019). A new worm grinding method of face gears based on the optimization of dressing wheel profile. Forschung im Ingenieurwesen.DOI
Yuansheng Zhou, Yuan-Hang Wu, Li-Ming Wang, Jinyuan Tang, Hong-Wu Ouyang (2019). A new closed-form calculation of envelope surface for modeling face gears. Mechanism and Machine Theory.DOI
Wei Wang, Huai-Ju Liu, Caichao Zhu, P. Wei, Jinyuan Tang (2019). Effects of microstructure on rolling contact fatigue of a wind turbine gear based on crystal plasticity modeling. International Journal of Fatigue.DOI
Haonan Li, Si-Yu Chen, Jinyuan Tang, Wei-Tao Chen, Hong-Wu Ouyang (2019). A novel approach for calculating no-load static transmission error based on measured discrete tooth surfaces. Mechanism and Machine Theory.DOI
Wei-Hua Zhou, Jinyuan Tang, Hai-Feng Chen, W. Shao, Bo Zhao (2019). Modeling of tooth surface topography in continuous generating grinding based on measured topography of grinding worm. Mechanism and Machine Theory.DOI
Si-Yuan Sun, Jinyuan Tang, W. Shao, Changshun Chen, Yaoxi Liu (2019). Research on the matching relationship between ultrasonic-assisted grinding parameters and workpiece surface roughness. The International Journal of Advanced Manufacturing Technology.DOI
Huai-Ju Liu, He-Li Liu, Caichao Zhu, P. Wei, Jinyuan Tang (2019). Tribological behavior of coated spur gear pairs with tooth surface roughness.DOI
Guofei Li, Jinyuan Tang, Wei Zhou, Lin Li (2018). Fatigue life prediction of workpiece with 3D rough surface topography based on surface reconstruction technology. Journal of Central South University.DOI
Yuqin Wen, Jinyuan Tang, Wei Zhou, Caichao Zhu (2018). A new elliptical microcontact model considering elastoplastic deformation.DOI
W. Shao, H. Ding, Jinyuan Tang (2018). Data-driven operation and compensation approaches to tooth flank form error measurement for spiral bevel and hypoid gears. Measurement.DOI
H. Ding, Jinyuan Tang, W. Shao, Shandong Peng (2018). An innovative determination approach to tooth compliance for spiral bevel and hypoid gears by using double-curved shell model and Rayleigh–Ritz approach. Mechanism and Machine Theory.DOI
Kai-Hong Zhou, Jinyuan Tang (2018). Single Point Contact Strip-Width-Maximization Machining Optimization for Sculptured Surface Using Non-ball-end.DOI
Yuansheng Zhou, Shandong Peng, Xinru Liu, S. Liu, Jinyuan Tang (2018). A novel method to generate the tooth surface model of face-milled generated spiral bevel gears. The International Journal of Advanced Manufacturing Technology.DOI
Huai-Ju Liu, Caichao Zhu, Zhanjiang Wang, X. Xu, Jinyuan Tang (2018). Investigation on the effect of coating properties on lubrication of a coated spur gear pair.DOI
Changshun Chen, Jinyuan Tang, Hai-Feng Chen, Bo Zhao (2018). An active manufacturing method of surface micro structure based on ordered grinding wheel and ultrasonic-assisted grinding.DOI
Yuan-Hang Wu, Yuansheng Zhou, Zhen-Yu Zhou, Jinyuan Tang, Hong-Wu Ouyang (2018). An advanced CAD/CAE integration method for the generative design of face gears. Advances in Engineering Software.DOI
Yuqin Wen, Jinyuan Tang, Wei Zhou, Caichao Zhu (2018). An improved simplified model of rough surface profile. Tribology International.DOI
De-Guo Li, Jinyuan Tang, Hai-Feng Chen, W. Shao (2018). Study on grinding force model in ultrasonic vibration-assisted grinding of alloy structural steel. The International Journal of Advanced Manufacturing Technology.DOI
Yuqin Wen, Jinyuan Tang (2018). A solution considering elastic-plastic deformation of asperities for contact between rough cylindrical surfaces.DOI
Dong-ri Liao, W. Shao, Jinyuan Tang, Jian-Ping Li, Xuan Tao (2018). Numerical generation of grinding wheel surfaces based on time series method.DOI
H. Ding, Jinyuan Tang (2018). Six sigma robust multi-objective optimization modification of machine-tool settings for hypoid gears by considering both geometric and physical performances. Applied Soft Computing.DOI
W. Shao, H. Ding, Jinyuan Tang, Shandong Peng (2018). A data-driven optimization model to collaborative manufacturing system considering geometric and physical performances for hypoid gear product. Robotics and Computer-Integrated Manufacturing.DOI
Hai-Feng Chen, Jinyuan Tang, W. Shao, Bo Zhao (2018). An Investigation of Surface Roughness in Ultrasonic Assisted Dry Grinding of 12Cr2Ni4A with Large Diameter Grinding Wheel. International Journal of Precision Engineering and Manufacturing.DOI
H. Ding, Zhi-Gang Wan, Yuansheng Zhou, Jinyuan Tang (2018). A data-driven programming of the human-computer interactions for modeling a collaborative manufacturing system of hypoid gears by considering both geometric and physical performances. Robotics and Computer-Integrated Manufacturing.DOI
Zehua Hu, Jinyuan Tang, Si-Yu Chen (2018). Analysis of coupled lateral-torsional vibration response of a geared shaft rotor system with and without gyroscopic effect.DOI
Hai-Feng Chen, Jinyuan Tang, W. Shao, Bo Zhao (2018). An investigation on surface functional parameters in ultrasonic-assisted grinding of soft steel.DOI
Wei-Hua Zhou, Jinyuan Tang, Hai-Feng Chen, Caichao Zhu, W. Shao (2018). A comprehensive investigation of plowing and grain-workpiece micro interactions on 3D ground surface topography. International Journal of Mechanical Sciences.DOI
Dong-ri Liao, W. Shao, Jinyuan Tang, Jian-Ping Li (2018). An improved rough surface modeling method based on linear transformation technique.DOI
Di-Qiu He, H. Ding, Jinyuan Tang (2018). A new analytical identification approach to the tooth contact points considering misalignments for spiral bevel or hypoid gears.DOI
Jinyuan Tang (2018). Calculation and Experimental Study on Residual Stress in Axial Ultrasonic Dry Grinding of 12CrNi4A Material.DOI
Zhen-Yu Zhou, Jinyuan Tang, H. Ding (2018). Accurate modification methodology of universal machine tool settings for spiral bevel and hypoid gears.DOI
Si-Yu Chen, Jinyuan Tang (2017). Effects of staggering and pitch error on the dynamic response of a double-helical gear set.DOI
H. Ding, Yuansheng Zhou, Jinyuan Tang, J. Zhong, Zhen-Yu Zhou, Guoxin Wan (2017). A novel operation approach to determine initial contact point for tooth contact analysis with errors of spiral bevel and hypoid gears.DOI
Changshun Chen, Jinyuan Tang, Hai-Feng Chen, C. Zhu (2017). Research about modeling of grinding workpiece surface topography based on real topography of grinding wheel. The International Journal of Advanced Manufacturing Technology.DOI
Huai-Ju Liu, Caichao Zhu, Zong-Lin Gu, Zhanjiang Wang, Jinyuan Tang (2017). Effect of Thermal Properties of a Coated Elastohydrodynamic Lubrication Line Contact Under Various Slide-to-Roll Ratios.DOI
Yuansheng Zhou, Zezhong C. Chen, Jinyuan Tang, S. Liu (2017). An innovative approach to NC programming for accurate five-axis flank milling of spiral bevel or hypoid gears. Comput. Aided Des..DOI
Wei Cui, Jinyuan Tang (2017). New method for calculating face gear tooth surface involving worm wheel installation errors.DOI
H. Ding, Guoxin Wan, Yuansheng Zhou, Jinyuan Tang, Zhen-Yu Zhou (2017). Nonlinearity analysis based algorithm for indentifying machine settings in the tooth flank topography correction for hypoid gears.DOI
Jinyuan Tang, Yang Liu, Wei-Xing Cai (2017). The principles of selecting floating members of 2K-H planetary gears for load balancing design.DOI
Yuansheng Zhou, Zezhong C. Chen, Jinyuan Tang (2017). A New Method of Designing the Tooth Surfaces of Spiral Bevel Gears With Ruled Surface for Their Accurate Five-Axis Flank Milling.DOI
Xing Zhang, Jinyuan Tang, Xue-Rui Zhang (2017). An optimized hardness model for carburizing-quenching of low carbon alloy steel.DOI
Hai-Feng Chen, Jinyuan Tang, Wei-Hua Zhou, Changshun Chen (2017). The equal theoretical surface roughness grinding method for gear generating grinding.DOI
Wei Zhou, Jinyuan Tang, Yan-Fei He, Caichao Zhu (2017). Modeling of rough surfaces with given roughness parameters.DOI
Hai-Yan Yan, Si-Yu Chen, Jinyuan Tang (2017). Rocking vibration and dynamic characteristics of a two-stage spur and bevel gear transmitting system.DOI
H. Ding, Jinyuan Tang, Yuansheng Zhou, J. Zhong, Guoxin Wan (2017). A multi-objective correction of machine settings considering loaded tooth contact performance in spiral bevel gears by nonlinear interval number optimization.DOI
H. Ding, Jinyuan Tang, W. Shao, Yuansheng Zhou, Guoxin Wan (2017). Optimal modification of tooth flank form error considering measurement and compensation of cutter geometric errors for spiral bevel and hypoid gears.DOI
Han Ding, Jinyuan Tang, Jue Zhong (2016). An accurate model of high-performance manufacturing spiral bevel and hypoid gears based on machine setting modification. Journal Of Manufacturing Systems, Vol. 410.DOI
Han Ding, Jinyuan Tang, Jue Zhong, Zhenyu Zhou (2016). A hybrid modification approach of machine-tool setting considering high tooth contact performance in spiral bevel and hypoid gears. Journal Of Manufacturing Systems, Vol. 410.DOI
Jinyuan Tang (2016). Modeling on Grinding Force Assisted with Axial Ultrasonic Vibration.DOI
H. Ding, Jinyuan Tang, J. Zhong (2016). Accurate nonlinear modeling and computing of grinding machine settings modification considering spatial geometric errors for hypoid gears.DOI
Yuansheng Zhou, Jinyuan Tang, Xinru Liu (2016). An automatic aroach to modeling the CAD model of face-milled spiral bevel gears.DOI
Zhen-Yu Zhou, Jinyuan Tang, Jian Dong (2016). Comparative study on the performance of modified face gears with helical pinion and spur pinion in the case of same power density.
Jinyuan Tang, Wei Cui, Heng Zhou, Feng Yin (2016). Integrity of grinding face-gear with worm wheel.DOI
Yuqin Wen, Jinyuan Tang (2016). A rough surfaces contact pressure analysis between meshing gears based on a GW model.DOI
Lu-Lu Qian, Jinyuan Tang, Si-Yu Chen (2016). The effect of shaft angles on dynamic load and load sharing characteristics of the split torque transmission system.DOI
Lu-Lu Qian, Jinyuan Tang, Si-Yu Chen, Yang Liu（2016）. 単段歯車伝動システムの有限要素動力学モデルと高速動的性能解析【JST・京大機械翻訳】.
Hai-Feng Chen, Jinyuan Tang (2016). Influence of ultrasonic assisted grinding on Abbott-Firestone curve. The International Journal of Advanced Manufacturing Technology.DOI
De-Tao Xu, Jinyuan Tang, Wei Zhou, Yong-Li Xu (2016). Related Rules Study of Gear Web Structure and Gear Tooth Root Crack Propagation based on Extended Finite Element Method.
Zehua Hu, Jinyuan Tang, J. Zhong, Si-Yu Chen, Hai-Yan Yan (2016). Effects of tooth profile modification on dynamic responses of a high speed gear-rotor-bearing system.DOI
H. Ding, Jinyuan Tang, J. Zhong, Guoxin Wan, Zhen-Yu Zhou (2016). Simulation and optimization of computer numerical control-milling model for machining a spiral bevel gear with new tooth flank.DOI
Jinyuan Tang, Xiao-Yu Yang (2016). Research on manufacturing method of planing for spur face-gear with 4-axis CNC planer.DOI
Wei-Hua Zhou, Jinyuan Tang (2016). Modeling on the microscopic geometric morphology of ultrasonic grinding gear surface based on grinding wheel micro-morphology.DOI
Yuansheng Zhou, Jinyuan Tang, Heng Zhou, Feng Yin (2016). Multistep Method for Grinding Face-Gear by Worm.DOI
Zehua Hu, Jinyuan Tang, J. Zhong, Si-Yu Chen (2016). Frequency spectrum and vibration analysis of high speed gear-rotor system with tooth root crack considering transmission error excitation.DOI
Ding Han, Jinyuan Tang, Zhen-Yu Zhou, Cui Wei (2016). Tooth flank reconstruction and optimizations after simulation process modeling for the spiral bevel gear.DOI
Zhao-Hua Sheng, Jinyuan Tang, Si-Yu Chen, Zehua Hu (2015). Modal Analysis of Double-Helical Planetary Gears With Numerical and Analytical Approach.DOI
Si-Yu Chen, Jinyuan Tang, Zehua Hu (2015). Comparisons of gear dynamic responses with rectangular mesh stiffness and its approximate form.DOI
Wei Zhou, Jinyuan Tang, Yan-Fei He (2015). Formulae of roughness peak distribution parameters with standard deviation and correlation length.DOI
Wei Zhou, Jinyuan Tang, Yan-Fei He, Dong-ri Liao (2015). Associated rules between microstructure characterization parameters and contact characteristic parameters of two cylinders.DOI
Zehua Hu, Jinyuan Tang, Si-Yu Chen, Zhao-Hua Sheng (2015). Coupled translation-rotation vibration and dynamic analysis of face geared rotor system.DOI
Hai-Feng Chen, Jinyuan Tang (2015). A model for prediction of surface roughness in ultrasonic-assisted grinding.DOI
Yan-Fei He, Jinyuan Tang, Wei Zhou, Dong-ri Liao (2015). Research on the Obtainment of Topography Parameters by Rough Surface Simulation With Fast Fourier Transform.DOI
Wei Zhou, Jinyuan Tang, Zhi-Hui Huang (2015). A New Method for Rough Surface Profile Simulation Based on Peak–Valley Mapping.DOI
Si-Yu Chen, Jinyuan Tang, Yuan-Ping Li, Zehua Hu (2015). Rotordynamics analysis of a double-helical gear transmission system. Meccanica (Milano. Print).DOI
Si-Yu Chen, Jinyuan Tang, Wei-Tao Chen, Zehua Hu, M. Cao (2014). Nonlinear dynamic characteristic of a face gear drive with effect of modification.DOI
Jian-Jie Tang, Jinyuan Tang (2014). Transmission Error Calculation Based on Manufacturing Errors and Load.DOI
Si-Yu Chen, Jinyuan Tang, Chang-Jiang Zhou, Zehua Hu (2014). Modal and whirling analysis of coupled lateral and torsional vibration of herringbone gear.DOI
Jinyuan Tang, Zehua Hu, Si-Yu Chen, Dun-Cai Lei (2014). Effects of directional rotation radius and transmission error on the dynamic characteristics of face gear transmission system.DOI
Hai-Feng Chen, Jinyuan Tang, Xiejun Lang, Yu-Lin Huang, Yu-Hui He (2014). Influences of dressing lead on surface roughness of ultrasonic-assisted grinding. The International Journal of Advanced Manufacturing Technology.DOI
Si-Yu Chen, Jinyuan Tang, Li-Juan Wu (2014). Dynamics analysis of a crowned gear transmission system with impact damping: Based on experimental transmission error.DOI
Xiao-Yu Yang, Jinyuan Tang (2014). Research on manufacturing method of CNC plunge milling for spur face-gear.DOI
Li-Juan Wu, Jinyuan Tang, Si-Yu Chen (2014). Effect of nonlinear impact damping with non-integer compliance exponent on gear dynamic characteristics.DOI
Zehua Hu, Jinyuan Tang, Si-Yu Chen, Zhao-Hua Sheng (2014). Dynamic analysis of high-speed face gear rotor system applying lumped parameters.DOI
Liao Dongri, Jinyuan Tang, Wei Zhou (2013). Based on the NCGM Method of the Gaussian 3-d Rough Surface Numerical Simulation. 2013 Fifth International Conference on Measuring Technology and Mechatronics Automation.DOI
Hai-Feng Chen, Jinyuan Tang, Wei Zhou (2013). Modeling and predicting of surface roughness for generating grinding gear.DOI
Zehua Hu, Jinyuan Tang, Si-Yu Chen, Dun-Cai Lei (2013). Effect of Mesh Stiffness on the Dynamic Response of Face Gear Transmission System.DOI
Hai-Feng Chen, Jinyuan Tang, Wei Zhou (2013). An experimental study of the effects of ultrasonic vibration on grinding surface roughness of C45 carbon steel. The International Journal of Advanced Manufacturing Technology.DOI
Jinyuan Tang, Feng Yin, Xingming Chen (2013). The principle of profile modified face-gear grinding based on disk wheel.DOI
Jinyuan Tang, Zehua Hu, Li-Juan Wu, Si-Yu Chen (2013). Effect of static transmission error on dynamic responses of spiral bevel gears.DOI
Jinyuan Tang, Yan-Ping Liu (2013). Loaded multi-tooth contact analysis and calculation for contact stress of face-gear drive with spur involute pinion.DOI
Jinyuan Tang (2012). Loaded Meshing Simulation of Face-gear Drive with Spur Involute Pinion Based on Finite Element Analysis.DOI
Jinyuan Tang (2011). Spiral Bevel Gear Meshing Stiffness Calculations Based on the Finite Element Method.DOI
Jinyuan Tang (2011). Contact-impact analysis of hypoid gear with finite element method.
Kai-Hong Zhou, Jinyuan Tang (2011). Envelope-approximation theory of manufacture technology for point-contact tooth surface on six-axis CNC hypoid generator.DOI
Jinyuan Tang (2011). Analysis of Global Character of Single Degree of Freedom Nonlinear Gear System Based on Digraph Cell Mapping Method.DOI
Xingming Chen, Jinyuan Tang (2011). Tooth Contact Analysis of Spur Face Gear Drives with Alignment Errors. 2011 Second International Conference on Digital Manufacturing & Automation.DOI
Jinyuan Tang, Si-Yu Chen, Chang-Jiang Zhou (2007). An Improved Nonlinear Dynamic Model of Gear Transmission.DOI
Jinyuan Tang, Chang-Jiang Zhou, Chang Wu (2007). Studies on FEM Geometrical Model of Gear Machined by Pre-Grinding Hob With Protuberance.DOI
Si-Yu Chen, Jinyuan Tang, Xin Liu (2007). The Dynamic Transmission Error and the Tooth Meshing Force Based on ANSYS/LS-DYNA.DOI
Kai-Hong Zhou, Jinyuan Tang, Tao Zeng (2007). New Geometry of Generating Spiral Bevel Gear.DOI
Chang-Jiang Zhou, Jinyuan Tang, Zhi-Hua Zhong (2007). Research on Superimposed Effect of Root Stresses and Teeth Compliance Considering Multi-Teeth Meshing.DOI
Jinyuan Tang (2007). Progress on the Modeling of Grinding Process.
Jinyuan Tang (2005). Analysis of Precision Property of Cross Leaf Spring Elastic Bearing Based on ANSYS.
Xiannian Kong, Zehua Hu, Jinyuan Tang, Si-Yu Chen, Zhiwei Wang. Effects of gear flexibility on the dynamic characteristics of spur and helical gear system. Mechanical systems and signal processing.DOI