吉敏｜上海第二工业大学｜学者主页

2023

Biomimetic microtextured surfaces to improve tribological and antibacterial behaviors of 3Y-TZP ceramics

Jinyang Xu, Xuan Zhang, Jing-Yu Dai, Dedong Yu, Min Ji, Ming Chen

Journal of Materials Research and Technology

DOI

2022

智能制造能力成熟度模型研究

高亮，吉敏，杨敬辉

《上海第二工业大学学报》

2022

A review on sintering and mechanical processing of 3Y-ZTP zirconia ceramics

Youkang Yin, Jinyang Xu, Min Ji, Linfeng Li, Ming Chen

Ceramics International

DOI

2022

On crack suppression mechanisms of ultrasonic elliptical vibration cutting of 3Y-TZP ceramics

Linfeng Li, Jinyang Xu, Min Ji, Youkang Yin, Ming Chen

Ceramics International

DOI

2022

Numerical study of interface damage formation mechanisms in machining CFRP/Ti6Al4V stacks under different cutting sequence strategies

Jinyang Xu, Tieyu Lin, Linfeng Li, Min Ji, J. Davim, Norbert Geier, Ming Chen

Composite structures

DOI

2022

Evaluation of Polycrystalline Diamond Tools in Milling of Pre-Sintered and Fully-Sintered Zirconia Ceramics

Jinyang Xu, Min Ji, Linfeng Li, Ming Chen

Journal of Superhard Materials

DOI

2022

A critical review addressing the drilling-induced damage issues for CFRP composites

Jinyang Xu, Youkang Yin, J. Davim, Linfeng Li, Min Ji, Norbert Geier, Ming Chen

Composite structures

DOI

2022

Study on PCD Tool Wear in Hard Milling of Fully-Sintered 3Y-TZP Ceramics

Jinyang Xu, Linfeng Li, Min Ji, Ming Chen

Journal of Superhard Materials

DOI

2021

Influence of sintering temperatures on material properties and corresponding milling machinability of zirconia ceramics

Min Ji, Jinyang Xu, Dedong Yu, Ming Chen, M. El Mansori

Journal of Manufacturing Processes

DOI

2021

Drilling performance of uncoated brad spur tools for high-strength carbon fiber-reinforced polymer laminates

Tieyu Lin, Jinyang Xu, Min Ji, Ming Chen

DOI

2021

Investigation of material removal mechanisms and ductile-brittle transition zone of zirconia ceramics sintered at various temperatures.

Min Ji, Jinyang Xu, Linfeng Li, Dedong Yu, Ming Chen, N. Geier, M. El Mansori

Journal of The Mechanical Behavior of Biomedical Materials

DOI

2021

Analysis of cutting responses of Sialon ceramic tools in high-speed milling of FGH96 superalloys

Weiwei Ming, Xianghui Huang, Min Ji, Jinyang Xu, F. Zou, Ming Chen

DOI

2021

Nano-scale mechanical behaviors and material removal mechanisms of zirconia ceramics sintered at various temperatures

Min Ji, Jinyang Xu, Linfeng Li, Dedong Yu, Ming Chen, M. El Mansori

Ceramics International

DOI

2021

Improving wettability, antibacterial and tribological behaviors of zirconia ceramics through surface texturing

Jinyang Xu, Min Ji, Linfeng Li, Yi Wu, Qi Yu, Ming Chen

Ceramics International

DOI

2021

Toward the mechanisms of surface texturing on the wear behavior of dental zirconia ceramics under dry and saliva lubricated conditions

Min Ji, Heng Zhang, Jinyang Xu, Chao Li, Dedong Yu, Ming Chen, M. El Mansori

DOI

2020

Investigation on Tribological Behavior of Glyceride-Filled Microcapsules as Additives in Water-Based Drilling Mud

Min Ji, Shu-Hai Liu, Hua-Ping Xiao

Tribology Transactions

DOI

2020

Effects of Different Cooling Methods on the Specific Energy Consumption when Drilling CFRP/Ti6Al4V Stacks

Min Ji, Jinyang Xu, Ming Chen, M. Mansori

Procedia Manufacturing

DOI

2020

Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills

Jinyang Xu, Min Ji, J. Davim, Ming Chen, M. El Mansori, V. Krishnaraj

DOI

2020

On the quantitative analysis of drill edge wear when machining CFRP/Ti6Al4V stacks

Jinyang Xu, Min Ji, Ming Chen

DOI

2020

On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites

Jinyang Xu, Xianghui Huang, J. Davim, Min Ji, Ming Chen

DOI

2020

Enhanced hydrophilicity and tribological behavior of dental zirconia ceramics based on picosecond laser surface texturing

Min Ji, Jinyang Xu, Ming Chen, M. El Mansori

DOI

2020

Effect of Ionic Liquids as Additives in Water-Based Drilling Mud for Steel–Steel Friction Pair

Min Ji, Shu-Hai Liu, Hua-Ping Xiao

DOI

2020

Experimental investigation on drilling machinability and hole quality of CFRP/Ti6Al4V stacks under different cooling conditions

Jinyang Xu, Min Ji, Ming Chen, M. El Mansori

The International Journal of Advanced Manufacturing Technology

DOI

2019

Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks

Jinyang Xu, Min Ji, Ming Chen, F. Ren

Materials and Manufacturing Processes

DOI

2019

FRICTIONAL AND WEAR BEHAVIORS OF IONIC LIQUID ADDITIVES FOR DRILLING FLUIDS

Min Ji, Shu-Hai Liu, Hua-Ping Xiao

2019

Author response for "Tribological behaviors of water-based drilling mud with oleic acid-filled microcapsules as lubricant additives for steel-steel contact"

Min Ji, Shu-Hai Liu, Hua-Ping Xiao

DOI

2018

Impacts of Glyceride Additive on Tribological Properties of Water-Based Drilling Mud for Steel–Steel Contact

Min Ji, Shu-Hai Liu, Hua-Ping Xiao

Tribology letter

DOI

2013

A note on scheduling a maintenance activity and due-window assignment based on common flow allowance

Ke Chen, Min Ji, Jiaojiao Ge

International Journal Of Production Economics，Vol. 145, No. 2

DOI

2012

Optimal semi-online scheduling algorithms on two parallel identical machines under a grade of service provision

Yong Wu, Min Ji, Qifan Yang

International Journal Of Production Economics，Vol. 135, No. 1

DOI

2008

Parallel-machine scheduling with simple linear deterioration to minimize total completion time

Min Ji, T. C. E. Cheng

European Journal Of Operational Research，Vol. 188, No. 2

DOI

2001

Scheduling in a two-machine flowshop with batch processing machine(s) for earliness/tardiness measure under a common due date

CS Sung, JI Min

European Journal Of Operational Research，Vol. 131, No. 1

DOI

吉敏

精选作品

期刊论文

Biomimetic microtextured surfaces to improve tribological and antibacterial behaviors of 3Y-TZP ceramics

智能制造能力成熟度模型研究

A review on sintering and mechanical processing of 3Y-ZTP zirconia ceramics

On crack suppression mechanisms of ultrasonic elliptical vibration cutting of 3Y-TZP ceramics

Numerical study of interface damage formation mechanisms in machining CFRP/Ti6Al4V stacks under different cutting sequence strategies

Evaluation of Polycrystalline Diamond Tools in Milling of Pre-Sintered and Fully-Sintered Zirconia Ceramics

A critical review addressing the drilling-induced damage issues for CFRP composites

Study on PCD Tool Wear in Hard Milling of Fully-Sintered 3Y-TZP Ceramics

Influence of sintering temperatures on material properties and corresponding milling machinability of zirconia ceramics

Drilling performance of uncoated brad spur tools for high-strength carbon fiber-reinforced polymer laminates

Investigation of material removal mechanisms and ductile-brittle transition zone of zirconia ceramics sintered at various temperatures.

Analysis of cutting responses of Sialon ceramic tools in high-speed milling of FGH96 superalloys

Nano-scale mechanical behaviors and material removal mechanisms of zirconia ceramics sintered at various temperatures

Improving wettability, antibacterial and tribological behaviors of zirconia ceramics through surface texturing

Toward the mechanisms of surface texturing on the wear behavior of dental zirconia ceramics under dry and saliva lubricated conditions

Investigation on Tribological Behavior of Glyceride-Filled Microcapsules as Additives in Water-Based Drilling Mud

Effects of Different Cooling Methods on the Specific Energy Consumption when Drilling CFRP/Ti6Al4V Stacks

Comparative study of minimum quantity lubrication and dry drilling of CFRP/titanium stacks using TiAlN and diamond coated drills

On the quantitative analysis of drill edge wear when machining CFRP/Ti6Al4V stacks

On the machining behavior of carbon fiber reinforced polyimide and PEEK thermoplastic composites

Enhanced hydrophilicity and tribological behavior of dental zirconia ceramics based on picosecond laser surface texturing

Effect of Ionic Liquids as Additives in Water-Based Drilling Mud for Steel–Steel Friction Pair

Experimental investigation on drilling machinability and hole quality of CFRP/Ti6Al4V stacks under different cooling conditions

Investigation of minimum quantity lubrication effects in drilling CFRP/Ti6Al4V stacks

FRICTIONAL AND WEAR BEHAVIORS OF IONIC LIQUID ADDITIVES FOR DRILLING FLUIDS

Author response for "Tribological behaviors of water-based drilling mud with oleic acid-filled microcapsules as lubricant additives for steel-steel contact"

Impacts of Glyceride Additive on Tribological Properties of Water-Based Drilling Mud for Steel–Steel Contact

A note on scheduling a maintenance activity and due-window assignment based on common flow allowance

Optimal semi-online scheduling algorithms on two parallel identical machines under a grade of service provision

Parallel-machine scheduling with simple linear deterioration to minimize total completion time

Scheduling in a two-machine flowshop with batch processing machine(s) for earliness/tardiness measure under a common due date