唐恒｜深圳大学｜学者主页

2026

冷媒直冷板沟槽-丝网复合结构制造及性能研究

伍春霞，汤勇，吴合槟，刘彦沛，唐恒

《机械工程学报》

2026

Fabrication and performance of aluminum heat sink with graded laminated composite wick for communication base stations

Zhi-Wen Zhou, Yong Tang, Runxing Cai, Shiwei Zhang, Fu-Ye Liang, Bo Tang, Heng Tang

Applied Thermal Engineering

DOI

2026

Fabrication and performance characterization of a phase-change thermal diode using scaly-finned fibers as the wick

Heng Tang, Yi Zhang, Guang-Zhao Yang, Yan-Song Xie, Yong Tang

Energy Conversion and Management

DOI

2026

Fabrication and capillary performance of microgroove wick structures for ceramic vapor chambers

C. Yan, Fang Lu, Gong Chen, Honglin Qiu, Heng Tang, Yong Tang

International Communications in Heat and Mass Transfer

DOI

2026

Cross-scale regulation of copper foam wick by mechanical compression and chemical oxidation for enhanced capillary performance

Zhi-Wen Zhou, Bo-Cai Liu, Jian-Xin Li, Shoujin Chen, Li-Kuan Zhu, Heng Tang, Yong Tang, Shiwei Zhang, Xuepeng Yuan

International Communications in Heat and Mass Transfer

DOI

2026

Fabrication of microchannel heat sinks using additive manufacturing: A review

Guang-Zhao Yang, Yong Tang, Ya-Long Sun, Gong Chen, Heng Tang

Renewable & Sustainable Energy Reviews

DOI

2026

Fabrication and capillary performance of short cutting-fiber wick structure for phase-change heat transfer devices

Guang-Zhao Yang, Hao Wang, Yong Tang, Heng Tang

Applied Thermal Engineering

DOI

2026

Fabrication and capillary performance of laser-modified multiscale carbon felt wicks for ultra-thin flexible polymer heat pipes

Yong Tang, Shuai-Dong Liu, Yu-Kuan Zhang, Heng Tang, Gong Chen

Applied Thermal Engineering

DOI

2026

Enhanced capillary performance of an aluminum-based vapor chamber by laser layered processing of microgroove wick structures

Zhi-Wen Zhou, Runxing Cai, Li-Kuan Zhu, Shiwei Zhang, Xian-Ming Zhang, Xi-Jie Wu, Heng Tang, Yong Tang

Thermal Science and Engineering Progress

DOI

2026

Fabrication and formation mechanism of polymer microgroove wicks by hot-pressing

Heng Tang, Rui-Bo Zhang, Chao Yan, Jiangyi Chen, Ya-Long Sun, Yong Tang

Chinese Journal of Mechanical Engineering

DOI

2026

Thermal performance of a refrigerant direct-cooling plate with mesh wick structure for lithium-ion batteries

Yan-Pei Liu, Chun-Xia Wu, Yong Tang, Heng Tang

Applied Thermal Engineering

DOI

2026

Capillary performance of ultrathin flexible microgroove wicks fabricated by two-step micro hot-pressing

Ya-Long Sun, Yong Tang, Jixing You, Heng Tang

Heat and Mass Transfer

DOI

2026

A review of active cooling technologies for electronic thermal management

Guang-Zhao Yang, Yong Tang, Gong Chen, Heng Tang

Renewable & Sustainable Energy Reviews

DOI

2026

Multi-attitude metal fin arrays via plowing extrusion-cutting

Baoyu Zhang, Shu-Deng Liu, Pei-Xuan Zhong, W. Deng, Yong Tang, Heng Tang

International Journal of Mechanical Sciences

DOI

2026

Analytical and experimental investigation on the capillary rise of heterogeneous porous-grooved AlN–Cu ceramic wick structures

Yong Tang, Shoujing Chen, Guangzhao Yang, Heng Tang

Physics of Fluids

DOI

2025

基于汽液复合通道的超薄均热板制造及性能研究

唐恒，张锐博，陈旭宏，安康，孙鹏，黄俊昕，汤勇

《电子机械工程》

DOI

2025

Fabrication and pool boiling performance of stepped microgroove wicks for ceramic vapor chambers

Heng Tang, Ganchang Lin, Kang An, Peng Sun, Jiangyi Chen, Ya-Long Sun, Yong Tang

The Physics of Fluids

DOI

2025

Fabrication and boiling performance assessment of cutting fiber felt for phase-change heat transfer devices

Yan-Song Xie, Hao Wang, Yong Tang, Heng Tang

International Communications in Heat and Mass Transfer

DOI

2025

Experimental and fractal analysis on wettability of rough structures

Chun-Xia Wu, Ya-Long Sun, Fu-Ye Liang, Kai Zhao, Heng Tang, Yong Tang

The Physics of Fluids

DOI

2025

Directional flow characteristics of droplets on superhydrophobic-superhydrophilic patterned microchannel surfaces

Chun-Xia Wu, Ya-Long Sun, Fu-Ye Liang, Heng Tang, Yong Tang

Surfaces and Interfaces

DOI

2025

Ultrathin flexible heat pipes with heat transfer performance and flexibility optimization for flexible electronic devices

Ya-Long Sun, Fu-Ye Liang, Jiangyi Chen, Heng Tang, Wei Yuan, Shiwei Zhang, Yong Tang, K. Chua

Renewable & Sustainable Energy Reviews

DOI

2024

Review on the Fabrication of Surface Functional Structures for Enhancing Bioactivity of Titanium and Titanium Alloy Implants

Heng Tang, Jiaxiang Xu, Bin Guo, Yan-Song Xie, Ya-Long Sun, Yan-Jun Lu, Yong Tang

Chinese Journal of Mechanical Engineering

DOI

2024

A review on the liquid cooling thermal management system of lithium-ion batteries

Chun-Xia Wu, Ya-Long Sun, Heng Tang, Shiwei Zhang, Wei Yuan, Li-Kuan Zhu, Yong Tang

Applied Energy

DOI

2024

Hierarchical sintered porous surfaces with enhanced pool boiling heat transfer performance for high-power cooling applications

Ya-Long Sun, Hong-Ming Li, Jiangyi Chen, Chun-Xia Wu, Heng Tang, Shiwei Zhang, Yong Tang

Applied Thermal Engineering

DOI

2024

Copper fiber wick with scaly fins fabricated by multi-tooth cutting for directional heat transfer

Heng Tang, Rui-Bo Zhang, Ya-Long Sun, Qiang Huang, Jiong Yang, Gong Chen, Yong Tang

Applied Thermal Engineering

DOI

2024

A review of fabrication and performance of heat pipes with grooved wick structure

Heng Tang, Qiang Huang, Fang Lu, Jiaxiang Xu, Yan-Song Xie, Ya-Long Sun, Gong Chen, Yong Tang

Applied Thermal Engineering

DOI

2024

Pool boiling heat transfer performance of micro-embossing molds for the fabrication of polymer wicks

Heng Tang, Jixing You, Yong Tang, Bin Guo, Ya-Long Sun

The Physics of Fluids

DOI

2024

Enhanced capillary performance of nanostructures copper woven mesh wick for ultrathin heat pipes

Chun-Xia Wu, Yong Tang, Li-Kuan Zhu, Ya-Long Sun, Shiwei Zhang, Cai-Man Yan, Heng Tang

Applied Thermal Engineering

DOI

2023

平板热管沟槽吸液芯结构刻蚀制造研究进展

伍春霞，唐恒，张仕伟，孙亚隆，伍晓宇，汤勇

《机械工程学报》

2023

Ultrathin flexible heat pipes with Microsorum fortunei structural-like wick for cooling flexible electronic devices

Ya-Long Sun, Fu-Ye Liang, Heng Tang, Yong Tang, Shiwei Zhang, K. Chua

International Journal of Heat and Mass Transfer

DOI

2023

Analytical and experimental on the capillary rise of aluminum multi-scale microgroove wick structures

Chun-Xia Wu, Yong Tang, Shiwei Zhang, Xuepeng Yuan, Cai-Man Yan, Heng Tang

The Physics of Fluids

DOI

2023

Review on the fabrication of surface functional structures for enhancing heat transfer of heat pipes

Heng Tang, Yan-Song Xie, Liangfeng Xia, Yong Tang, Ya-Long Sun

Applied Thermal Engineering

DOI

2023

Enhanced capillary performance of ultrathin nylon mesh wick for flexible thermal management systems

Yong Tang, Xiaoqian Xi, Fu-Ye Liang, Shiwei Zhang, Heng Tang, Chun-Xia Wu, Ya-Long Sun

International Journal of Heat and Mass Transfer

DOI

2022

Fabrication and pool boiling performance assessment of microgroove array surfaces with secondary micro-structures for high power applications

Heng Tang, Liangfeng Xia, Yong Tang, Changxing Weng, Zuo-Huan Hu, Xiaoyu Wu, Ya-Long Sun

Renewable Energy

DOI

2022

Experimental Investigation on a Novel Necking Heat Pipe with Double-End Heating for Thermal Management of the Overload Operation

Jie Li, Shiwei Zhang, Heng Tang, Yi-Fu Liang, Sheng Wang, Guisheng Zhong, Yong Tang

Applied Sciences

DOI

2022

Fabrication and capillary characterization of multi-scale microgroove wicks for ultrathin phase-change heat transfer devices

Heng Tang, Yong Tang, Xiaoyu Wu, Rui-Tao Peng, Ya-Long Sun

Applied Thermal Engineering

DOI

2022

Stress analysis and thermal performance of ultra-thin heat pipes for compact electronics

Heng Tang, Yangyang Xie, Yong Tang, Xiaoyu Wu, Chun-Xia Wu, Ya-Long Sun

International Communications in Heat and Mass Transfer

DOI

2022

A review on fabrication and pool boiling enhancement of three-dimensional complex structures

Ya-Long Sun, Yong Tang, Shiwei Zhang, W. Yuan, Heng Tang

Renewable & Sustainable Energy Reviews

DOI

2022

Fabrication and boiling heat transfer characterization of multi-scale microgroove surfaces

Heng Tang, B. Guo, Yong Tang, Xiaoyu Wu, Rui-Tao Peng, Ya-Long Sun

Science China Technological Sciences

DOI

2021

Effect of stagger angle on capillary performance of microgroove structures with reentrant cavities

Ya-Long Sun, Fu-Ye Liang, Yong Tang, Heng Tang, Xiaoqian Xi, Shu Yang, T. Fu

Science China Technological Sciences

DOI

2021

Thermal performance enhancement of an ultra-thin flattened heat pipe with multiple wick structure

Heng Tang, Changxing Weng, Yong Tang, Hui Li, Tenggui Xu, T. Fu

DOI

2021

Development Status and Perspective Trend of Motor Cooling Systems

Yong Tang, Ya-Long Sun, Zhi-Jun Guo, Shiwei Zhang, Wei Yuan, Heng Tang, Fu-Ye Liang

DOI

2020

Effect of inclination angle on the thermal performance of an ultrathin heat pipe with multi-scale wick structure

Heng Tang, Changxing Weng, Yong Tang, Yan-Jun Lu, T. Fu

DOI

2020

Thermal performance enhancement of micro-grooved aluminum flat plate heat pipes applied in solar collectors

Gong Chen, Yong Tang, Long-Hua Duan, Heng Tang, Guisheng Zhong, Z. Wan, Shiwei Zhang, T. Fu

Renewable Energy

DOI

2019

平板铝热管微沟槽吸液芯的制备及毛细性能研究

唐恒，汤勇，万珍平，陆龙生，伍晓宇，鲁艳军

《机械工程学报》

2019

Fabrication and Capillary Performance of Micro-grooved Wicks for Aluminium Flat-plate Heat Pipes

Heng Tang, Yong Tang, Zhenping Wan, Longsheng Lu, Xiaoyu Wu, Yanjun Lu

Journal of Mechanical Engineering

DOI

2019

Heat transfer characteristic of an ultra-thin flat plate heat pipe with surface-functional wicks for cooling electronics

Gong Chen, Yong Tang, Z. Wan, Guisheng Zhong, Heng Tang, Jian Zeng

DOI

2019

Experimental study on the capillary performance of aluminum micro-grooved wicks with reentrant cavity array

Shiwei Zhang, Lang Lin, Gong Chen, Heng Tang, Jian Zeng, W. Yuan, Yong Tang

International Journal of Heat and Mass Transfer

DOI

2018

丝网吸液芯超薄热管制造及其传热性能研究

唐恒

《华南理工大学》

2018

Experimental investigation of the thermal performance of heat pipe with multi-heat source and double-end cooling

Heng Tang, Yong Tang, Li Jie, Ya-Long Sun, Guan-Wei Liang, R. Peng

DOI

2018

Effects of heat flux, mass flux and channel width on flow boiling performance of porous interconnected microchannel nets

Shiwei Zhang, Ya-Long Sun, W. Yuan, Yong Tang, Heng Tang, Kai-Rui Tang

DOI

2018

Fabrication and capillary characterization of axially micro-grooved wicks for aluminium flat-plate heat pipes

Heng Tang, Yong Tang, W. Yuan, R. Peng, Long-Sheng Lu, Z. Wan

DOI

2018

Heat transfer characteristics of a novel closed-loop pulsating heat pipe with a check valve

C. Feng, Z. Wan, Hai-Jun Mo, Heng Tang, Long-Sheng Lu, Yong Tang

Applied Thermal Engineering

DOI

2018

Review of applications and developments of ultra-thin micro heat pipes for electronic cooling

Heng Tang, Yong Tang, Z. Wan, Jie Li, W. Yuan, Long-Sheng Lu, Yong Li, Kai-Rui Tang

Applied Energy

DOI

2018

Various orientations research on thermal performance of novel multi-branch heat pipes with different sintered wicks

Guisheng Zhong, Xinrui Ding, Yong Tang, Shu-Dong Yu, Gong Chen, Heng Tang, Zong-Tao Li

Energy Conversion and Management

DOI

2017

Experimental investigation of capillary force in a novel sintered copper mesh wick for ultra-thin heat pipes

Yong Tang, Heng Tang, Jie Li, Shiwei Zhang, Bao-Shan Zhuang, Ya-Long Sun

DOI

2017

Experimental investigation of the thermal performance of heat pipes with double-ended heating and middle-cooling

Heng Tang, Tang Yong, Bao-Shan Zhuang, Chen Gong, Shiwei Zhang

DOI

2017

超薄ヒートパイプのための新しい焼結銅メッシュウィックにおける毛管力の実験的研究【Powered by NICT】

Yong Tang, Heng Tang, Jie Li, Shiwei Zhang, Bao-Shan Zhuang, Ya-Long Sun

2015

基于无机热管冷却的干切削刀具切削性能的研究

唐恒

《湘潭大学》

精选作品

期刊论文

冷媒直冷板沟槽-丝网复合结构制造及性能研究

Fabrication and performance of aluminum heat sink with graded laminated composite wick for communication base stations

Fabrication and performance characterization of a phase-change thermal diode using scaly-finned fibers as the wick

Fabrication and capillary performance of microgroove wick structures for ceramic vapor chambers

Cross-scale regulation of copper foam wick by mechanical compression and chemical oxidation for enhanced capillary performance

Fabrication of microchannel heat sinks using additive manufacturing: A review

Fabrication and capillary performance of short cutting-fiber wick structure for phase-change heat transfer devices

Fabrication and capillary performance of laser-modified multiscale carbon felt wicks for ultra-thin flexible polymer heat pipes

Enhanced capillary performance of an aluminum-based vapor chamber by laser layered processing of microgroove wick structures

Fabrication and formation mechanism of polymer microgroove wicks by hot-pressing

Thermal performance of a refrigerant direct-cooling plate with mesh wick structure for lithium-ion batteries

Capillary performance of ultrathin flexible microgroove wicks fabricated by two-step micro hot-pressing

A review of active cooling technologies for electronic thermal management

Multi-attitude metal fin arrays via plowing extrusion-cutting

Analytical and experimental investigation on the capillary rise of heterogeneous porous-grooved AlN–Cu ceramic wick structures

基于汽液复合通道的超薄均热板制造及性能研究

Fabrication and pool boiling performance of stepped microgroove wicks for ceramic vapor chambers

Fabrication and boiling performance assessment of cutting fiber felt for phase-change heat transfer devices

Experimental and fractal analysis on wettability of rough structures

Directional flow characteristics of droplets on superhydrophobic-superhydrophilic patterned microchannel surfaces

Ultrathin flexible heat pipes with heat transfer performance and flexibility optimization for flexible electronic devices

Review on the Fabrication of Surface Functional Structures for Enhancing Bioactivity of Titanium and Titanium Alloy Implants

A review on the liquid cooling thermal management system of lithium-ion batteries

Hierarchical sintered porous surfaces with enhanced pool boiling heat transfer performance for high-power cooling applications

Copper fiber wick with scaly fins fabricated by multi-tooth cutting for directional heat transfer

A review of fabrication and performance of heat pipes with grooved wick structure

Pool boiling heat transfer performance of micro-embossing molds for the fabrication of polymer wicks

Enhanced capillary performance of nanostructures copper woven mesh wick for ultrathin heat pipes

平板热管沟槽吸液芯结构刻蚀制造研究进展

Ultrathin flexible heat pipes with Microsorum fortunei structural-like wick for cooling flexible electronic devices

Analytical and experimental on the capillary rise of aluminum multi-scale microgroove wick structures

Review on the fabrication of surface functional structures for enhancing heat transfer of heat pipes

Enhanced capillary performance of ultrathin nylon mesh wick for flexible thermal management systems

Fabrication and pool boiling performance assessment of microgroove array surfaces with secondary micro-structures for high power applications

Experimental Investigation on a Novel Necking Heat Pipe with Double-End Heating for Thermal Management of the Overload Operation

Fabrication and capillary characterization of multi-scale microgroove wicks for ultrathin phase-change heat transfer devices

Stress analysis and thermal performance of ultra-thin heat pipes for compact electronics

A review on fabrication and pool boiling enhancement of three-dimensional complex structures

Fabrication and boiling heat transfer characterization of multi-scale microgroove surfaces

Effect of stagger angle on capillary performance of microgroove structures with reentrant cavities

Thermal performance enhancement of an ultra-thin flattened heat pipe with multiple wick structure

Development Status and Perspective Trend of Motor Cooling Systems

Effect of inclination angle on the thermal performance of an ultrathin heat pipe with multi-scale wick structure

Thermal performance enhancement of micro-grooved aluminum flat plate heat pipes applied in solar collectors

平板铝热管微沟槽吸液芯的制备及毛细性能研究

Fabrication and Capillary Performance of Micro-grooved Wicks for Aluminium Flat-plate Heat Pipes

Heat transfer characteristic of an ultra-thin flat plate heat pipe with surface-functional wicks for cooling electronics

Experimental study on the capillary performance of aluminum micro-grooved wicks with reentrant cavity array

丝网吸液芯超薄热管制造及其传热性能研究

Experimental investigation of the thermal performance of heat pipe with multi-heat source and double-end cooling

Effects of heat flux, mass flux and channel width on flow boiling performance of porous interconnected microchannel nets

Fabrication and capillary characterization of axially micro-grooved wicks for aluminium flat-plate heat pipes

Heat transfer characteristics of a novel closed-loop pulsating heat pipe with a check valve

Review of applications and developments of ultra-thin micro heat pipes for electronic cooling

Various orientations research on thermal performance of novel multi-branch heat pipes with different sintered wicks

Experimental investigation of capillary force in a novel sintered copper mesh wick for ultra-thin heat pipes

Experimental investigation of the thermal performance of heat pipes with double-ended heating and middle-cooling

超薄ヒートパイプのための新しい焼結銅メッシュウィックにおける毛管力の実験的研究【Powered by NICT】

基于无机热管冷却的干切削刀具切削性能的研究

会议论文

超薄热管相变压扁成形力学性能分析

研究方向