田妮｜东北大学｜学者主页

2026

Fatigue damage tolerance of 2024-T351 aluminum alloy sheet with gradient-grains processed via thermomechanical treatment

Ni Tian, Zihang Kang, Zihan Gao, Yinzhu Li, Quanxin Yan, Jinlai Fu, Fuguan Cong, Xinghui Li, Gang Zhao, Qiang Wang

Materials Science and Engineering A

DOI

2026

Competition mechanism between dissolution and transformation of second phases in a DC casting 7050 aluminum alloy ingot during homogenization revealed by in-situ scanning electron microscopy

Yaozhong Zhang, Ni Tian, Quanxin Yan, Yinzhu Li, Zihan Gao, Xinghui Li, Yiran Zhou, Gang Zhao, Gaowu Qin

Materials Characterization

DOI

2025

Al-0.8Mg-0.9Si-0.6Cu-0.4Mn合金挤压型材的室温停放效应

王涛，刘德涛，栾兴隆，王玉刚，李银柱，张沛鸿，田妮

《轻合金加工技术》

DOI

2025

横轧变形量对7075-T6铝合金板材组织与性能的影响

田妮，张志森，张沛鸿，张天祥

《东北大学学报(自然科学版)》

2025

Investigation of damage accumulation in under-aged 7005 aluminum alloy sheet during high-cycle fatigue process

Ni Tian, Tianxiang Zhang, Zihang Kang, Peihong Zhang, Yinzhu Li, Yaozhong Zhang, Yiran Zhou, Fuguan Cong, Gang Zhao, Gaowu W. Qin

Journal of Materials Science

DOI

2024

Effect of total content of Zn and Mg on microstructure and mechanical properties of Al-3.2xZn-xMg-1.66Cu-0.15Zr aluminum alloy sheet

Ni Tian, Jiacheng Liu, Hao Liu, Zhisen Zhang, Yaozhong Zhang, Yiran Zhou, Gang Zhao, Gaowu W. Qin

Materials Science and Engineering A

DOI

2024

Correction: Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Jiaming Li, Zhiqi Wang, Junyuan Bai, Hao Xue, Ni Tian, Zhihao Zhao, Gaowu W. Qin

Journal of Materials Science

DOI

2024

Enhancing mechanical properties and defects elimination in 2024 aluminum alloy through interlayer friction stir processing in wire arc additive manufacturing

Jingxun Wei, Changshu He, Ruifeng Dong, Ni Tian, Gaowu W. Qin

Materials Science and Engineering A

DOI

2024

Dislocation configuration on the fatigue fracture behavior of a solution-treated 7005 aluminum alloy plate

Ni Tian, Yaozhong Zhang, Zhisen Zhang, Jiacheng Liu, Hao Liu, Yiran Zhou, Gang Zhao, Gaowu W. Qin

Materials Science and Engineering A

DOI

2024

Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Jiaming Li, Zhiqi Wang, Junyuan Bai, Hao Xue, Ni Tian, Zhihao Zhao, Gaowu W. Qin

Journal of Materials Science

DOI

2024

Portevin-Le Chatelier characterization of annealed Al-Mg alloy sheets with different Mg contents

Ni Tian, Hao Liu, Zhisen Zhang, Jiacheng Liu, Yaozhong Zhang, Yiran Zhou, Gang Zhao, Gaowu W. Qin

Materials Science and Engineering A

DOI

2023

铝合金形变热处理研究进展及发展趋势

张志森，刘家承，刘浩，冯震，赵刚，田妮

《轻合金加工技术》

2023

Sc含量对含Zr的Al-0.36Mg-1.23Si合金板材组织和性能的影响

田妮，刘浩，张耀中，张志森，刘家承，赵刚

《轻合金加工技术》

2023

Zr含量对汽车车身用Al-0.36Mg-1.23Si合金板材组织及性能的影响

田妮，李燕杰，王文泽，冯震

《东北大学学报(自然科学版)》

2023

The formation of three phases containing Fe and Mn in 5182 aluminum alloy

Ni Tian, Yaozhong Zhang, Zhiyong He, Hao Liu, Zhisen Zhang, Jiacheng Liu, Gang Zhao, Gaowu W. Qin

Materials Characterization

DOI

2023

Effects of Mg content on microstructure, mechanical properties and fracture behavior of wrought Al–8Si–(<0.01–1.32)Mg alloy sheets in T6 temper

Guangdong Wang, Jingyi Cao, Yiran Zhou, Ni Tian

Journal of Alloys and Compounds

DOI

2022

DC铸造7475铝合金中含铬弥散相非均匀分布的机理（英文）

周轶然，田妮，刘威，曾渝，王光东，韩世达，赵刚，秦高梧

Transactions of Nonferrous Metals Society of China

2022

析出相粒子组态对Al-0.67Mg-1.35Si-0.64Cu-0.61Mn板材n值的影响

刘玉杰，冯震，宋伟豪，王文泽，田妮，赵刚

《轻金属》

2022

预拉伸变形对欠时效7N01铝合金板材疲劳断裂的影响

田妮，石旭，刘威，刘春城，赵刚，左良

《金属学报》

2022

含Mn合金相对T4态Al-0.35Mg-1.62Si-0.2Cu铝合金板材性能的影响

田妮，尚书贤，刘春城，王光东，赵刚，秦高梧

《稀有金属》

DOI

2022

Zr对Al-10Zn-2.5Mg-1.6Cu合金板材组织与性能的影响

田妮，张耀中，周轶然，秦广华

《东北大学学报(自然科学版)》

2022

Al-0.12Zr合金中Zr元素的添加方法研究

刘玉杰，王文泽，贺志勇，冯震，田妮，赵刚

《轻金属》

2022

冷变形对T4P态Al-Mg-Si板材在烤漆过程中的时效析出及软化行为的影响

刘玉杰，姜旭，刘浩，张耀中，田妮，赵刚

《轻金属》

2022

Effect of Precipitates on the Mechanical Performance of 7005 Aluminum Alloy Plates

Ni Tian, Jiang Xu, Yaozhong Zhang, Zijie Zeng, Tianshi Wang, Gang Zhao, Gaowu W. Qin

Materials

DOI

2022

Improvement of microstructure and fatigue performance of wire-arc additive manufactured 4043 aluminum alloy assisted by interlayer friction stir processing

Changshu He, Jingxun Wei, Ying Li, Zhiqiang Zhang, Ni Tian, Gaowu W. Qin, Liang Zuo

Journal of Material Science and Technology

DOI

2022

Effect of Post-Fabricated Aging on Microstructure and Mechanical Properties in Underwater Friction Stir Additive Manufacturing of Al–Zn–Mg–Cu Alloy

Ying Li, Changshu He, Jingxun Wei, Zhiqiang Zhang, Ni Tian, Gaowu W. Qin, Xiang Min Zhao

Materials

DOI

2022

Mechanism of heterogeneous distribution of Cr-containing dispersoids in DC casting 7475 aluminum alloy

Yiran Zhou, Ni Tian, Wei LIU, Yu ZENG, Guang-dong WANG, Shi-da HAN, Gang Zhao, Gaowu W. Qin

Transactions of Nonferrous Metals Society of China

DOI

2022

Effects of Pre-Tensile Deformation on the Fatigue Fracture Behavior of Annealed 7005 Aluminum Alloy Plate

Ni Tian, Zhen Feng, Xu Shi, Wenze Wang, Kun Liu, Gang Zhao, Gaowu W. Qin

Materials

DOI

2022

Restirring and Reheating Effects on Microstructural Evolution of Al–Zn–Mg–Cu Alloy During Underwater Friction Stir Additive Manufacturing

Ying Li, Changshu He, Jingxun Wei, Zhiqiang Zhang, Ni Tian, Gaowu W. Qin, Xiang Min Zhao

Materials

DOI

2021

DC铸造7475铝合金铸锭中合金元素的微观偏析

周轶然，田妮，张耀中，姜旭，石旭，赵刚

《轻金属》

DOI

2021

汽车车身用Al-Mg-Si-Cu-Mn合金板材强度与n值的相关性研究

田妮，刘威，石旭，赵刚，秦高梧

《轻合金加工技术》

DOI

2021

DC铸造铝合金铸锭中含Cr弥散相粒子的析出行为

周轶然，田妮，姜旭，张耀中，石旭，赵刚

《轻金属》

DOI

2021

Enhancing the mechanical performance of Al–Zn–Mg alloy builds fabricated via underwater friction stir additive manufacturing and post-processing aging

Changshu He, Ying Li, Jingxun Wei, Zhiqiang Zhang, Ni Tian, Gaowu W. Qin, Xiang Min Zhao

Journal of Material Science and Technology

DOI

2021

Formation of Phases and Microstructures in Al-8Si Alloys with Different Mg Content

Ni Tian, Guangdong Wang, Yiran Zhou, Chuncheng Liu, Kun Liu, Gang Zhao, Liang Zuo

Materials

DOI

2021

Phase Formation and Microstructure Evolution of Al-5Si-0.8Mg Alloys with Different Mn Concentrations

Ni Tian, Guangdong Wang, Yiran Zhou, Chuncheng Liu, Kun Liu, Gang Zhao, Liang Zuo

Metals

DOI

2020

T4态轧制变形Al-(1.44-12.40)Si-0.7Mg合金板材屈服强度的预测（英文）

王光东，田妮，曹敬祎，周轶然，赵刚，左良

Transactions of Nonferrous Metals Society of China

2020

6N01铝合金挤压材显微组织及其力学性能的相关性

王建军，张豪，田妮，何长树，赵刚

《轻合金加工技术》

DOI

2020

Yield strength prediction of rolled Al−(1.44−12.40)Si−0.7Mg alloy sheets under T4 condition

Guangdong Wang, Ni Tian, Jingyi Cao, Yiran Zhou, Gang Zhao, Liang Zuo

Transactions of Nonferrous Metals Society of China

DOI

2019

7B50铝合金淬透性及其临界平均冷却速率研究

康雷，赵刚，刘坤，田妮

《稀有金属材料与工程》

2019

7050合金固溶后在180～250℃等温淬火时的析出行为

康雷，赵刚，田妮

《稀有金属材料与工程》

2019

Prediction of the Work-Hardening Exponent for 3104 Aluminum Sheets with Different Grain Sizes

Ni Tian, Fei Yuan, Ceheng Duan, Kun Liu, Guangdong Wang, Gang Zhao, Liang Zuo

Materials

DOI

2018

铸锭不均匀化处理对Al-1.01Mg-1.11Si-0.38Cu-0.69Mn合金热轧板显微组织的影响

田妮，刘启隆，赵紫研，赵刚，刘坤

《轻合金加工技术》

2018

Mg含量对Al-xMg合金板材显微组织的影响

赵海，吉猛，王光东，田妮，何长树，赵刚

《轻合金加工技术》

2018

7B50超高强铝合金喷水淬火过程综合表面换热系数的计算（英文）

康雷，赵刚，田妮，张海涛

Transactions of Nonferrous Metals Society of China

2018

DC铸造Al-12Si-0.65Mg-xMn合金中第二相的形成

王光东，田妮，何长树，赵刚，左良

《金属学报》

2018

6082铝合金42 mm厚型材双面FSW焊接接头的组织与性能

张铁浩，刘思奇，张云鹏，尹华，田妮，何长树

《轻合金加工技术》

2018

Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy

Lei Kang, Gang Zhao, Guangdong Wang, Kun Liu, Ni Tian

Transactions of Nonferrous Metals Society of China

DOI

2018

Prediction of properties distribution of 7B50 alloy thick plates after quenching and aging by quench factor analysis method

Lei Kang, Yiran Zhou, Gang Zhao, Kun Liu, Ni Tian

Rare Metals

DOI

2018

Computation of synthetic surface heat transfer coefficient of 7B50 ultra-high-strength aluminum alloy during spray quenching

Lei Kang, Gang Zhao, Ni Tian, Haitao Zhang

Transactions of Nonferrous Metals Society of China

DOI

2016

均匀化前预处理对Al-Zn-Mg-Cu合金中含V相析出及再结晶的影响

郭占英，丛福官，赵刚，X.-Grant Chen，田妮

《轻合金加工技术》

2016

均匀化前预处理对7150铝合金中Al3Zr相析出及再结晶的影响

郭占英，丛福官，赵刚，X.-Grant Chen，田妮

《轻合金加工技术》

2016

Al-3Si-0.6Mg-(Cu,Mn)合金薄板的组织性能

田月，赵刚，田妮，刘坤

《材料与冶金学报》

2016

Two-step Aging Treatment in Ultra-High-Strength Al-Zn-Mg-Cu Aluminum Alloy

Kun Liu, Gang Zhao, Ni Tian

MATEC Web of Conferences

DOI

2016

Evolution of Iron-containing Compounds in Al-Cu Alloys during Heat Treatment

Kun Liu, Gang Zhao, Ni Tian

MATEC Web of Conferences

DOI

2015

浅谈热处理过程中AA5083铝合金的钎焊

刘坤，赵刚，田妮

《企业技术开发》

2015

加热条件对含镁共晶Al-Si合金半连续铸锭热轧的影响

李梦媛，洪涛，赵刚，田妮，左良

《轻合金加工技术》

2015

Effect of homogenization treatment on microstructure and mechanical properties of DC cast 7X50 aluminum alloy

Fuguan Cong, Gang Zhao, Feng Jiang, Ni Tian, Rui-feng LI

Transactions of Nonferrous Metals Society of China

DOI

2015

Measurement of TTP Curves of 7050 Aluminum Alloy by Conductivity

Lei Kang, Gang Zhao, Ni Tian, He Fu

Advanced materials research

DOI

2014

汽车车身用6016铝合金薄板应变硬化指数研究

孙黎明，田妮，丛福官，王凤春

《轻合金加工技术》

2013

7150-T7751铝合金厚板性能的不均匀性

丛福官，赵刚，田妮，李瑞锋

《材料研究学报》

2013

应力对蠕变时效2524合金微观组织的影响(英文)

权力伟，赵刚，田妮，黄明丽

Transactions of Nonferrous Metals Society of China

2013

铝合金端淬轴向温度场测定新方法的研究

康雷，赵刚，田妮，刘坤

《轻合金加工技术》

2013

Effect of stress on microstructures of creep-aged 2524 alloy

Li-wei QUAN, Gang Zhao, Ni Tian, Mingli Huang

Transactions of Nonferrous Metals Society of China

DOI

2012

固溶温度对新型Al-12.7Si-0.7Mg合金挤压材组织性能的影响

洪涛，龚园平，田妮，赵刚，于福晓，左良

《稀有金属》

2012

原铝液DC铸造2A12铝合金铸锭的高温均匀化研究

孙振宇，冯彦波，聂波，李瑞锋，赵刚，田妮

《轻合金加工技术》

2012

7×××系超高强铝合金的强韧化研究进展及发展趋势

丛福官，赵刚，田妮，韩啸，朱铭熙，于金浩

《轻合金加工技术》

2011

Al-6.2Zn-2.3Mg-2.3Cu合金热压缩变形的流变应力与组织演变

丛福官，赵刚，潘清林，尹志民，田妮，韩啸

《轻合金加工技术》

2011

外加载荷对2124合金微观组织和性能的影响

权力伟，赵刚，田妮

《东北大学学报(自然科学版)》

2011

Effect of Additional Load on the Performance and Microstructure of 2124 Alloy

Ni Tian

Journal of Northeastern University

2010

汽车车身用Al-Mg-Si-Cu合金薄板应变强化行为的研究

田妮，赵刚，左良，刘春明

《金属学报》

2010

Al-6.2Zn-2.3Mg-2.3Cu铝合金厚板的双级时效工艺

丛福官，赵刚，田妮，李念奎，王凤春，孙兆霞

《轻合金加工技术》

2008

7050合金半连续铸锭中结晶相及其均匀化处理

高凤华，李念奎，丛福官，田妮，赵刚

《稀有金属》

2008

Al-6.5Zn-2.4Mg-2.3Cu铝合金半连续铸锭的均匀化处理

高凤华，田妮，孙兆霞，赵刚

《东北大学学报(自然科学版)》

2008

Al-1.3Si-0.7Mg-0.7Cu-0.3Mn铝合金薄板在固溶处理过程中的组织转变

田妮，赵刚，刘春明，左良

《东北大学学报(自然科学版)》

2008

7050铝合金半连续铸锭在DSC分析过程中组织的变化

高凤华，李念奎，田妮，赵刚

《材料与冶金学报》

2008

2124铝合金在加载时效时的变形特点

权力伟，丛福官，刘春城，李念奎，田妮，赵刚

《轻合金加工技术》

2008

Overheating temperature of 7B04 high strength aluminum alloy

Feng-hua GAO, Nian-kui LI, Ni Tian, Qiang Sun, Xiandong Liu, Gang Zhao

Transactions of Nonferrous Metals Society of China

DOI

2007

Al-6.1Zn-2.6Mg-1.6Cu铝合金的回归再时效热处理(英文)

魏先贺，田妮，李念奎，赵刚

《材料与冶金学报》

2007

固溶处理对Al-1.5Si-1.2Mg-0.6Cu-0.3Mn铝合金组织性能的影响

田妮，赵刚，刘春明，左良

《材料与冶金学报》

2007

Al-6.1Zn-2.6Mg-1.6Cu超高强铝合金铸锭均匀化处理研究

孙凤仙，高凤华，李念奎，田妮，赵刚

《轻合金加工技术》

2006

形变量对6111铝合金再结晶织构的影响

陈扬，田妮，赵刚，刘春明，左良

《轻合金加工技术》

2006

Al-1.3Si-1.2Mg-0.7Mn-0.6Cu铝合金的回归处理

宋文举，田妮，权力伟，赵刚，刘春明，左良

《轻合金加工技术》

2006

预先热处理对6111铝合金冷轧及再结晶织构的影响

陈扬，田妮，赵刚，刘春明，左良

《中国有色金属学报》

精选作品

期刊论文

Fatigue damage tolerance of 2024-T351 aluminum alloy sheet with gradient-grains processed via thermomechanical treatment

Competition mechanism between dissolution and transformation of second phases in a DC casting 7050 aluminum alloy ingot during homogenization revealed by in-situ scanning electron microscopy

Al-0.8Mg-0.9Si-0.6Cu-0.4Mn合金挤压型材的室温停放效应

横轧变形量对7075-T6铝合金板材组织与性能的影响

Investigation of damage accumulation in under-aged 7005 aluminum alloy sheet during high-cycle fatigue process

Effect of total content of Zn and Mg on microstructure and mechanical properties of Al-3.2xZn-xMg-1.66Cu-0.15Zr aluminum alloy sheet

Correction: Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Enhancing mechanical properties and defects elimination in 2024 aluminum alloy through interlayer friction stir processing in wire arc additive manufacturing

Dislocation configuration on the fatigue fracture behavior of a solution-treated 7005 aluminum alloy plate

Research progress on microstructure tuning of heat-resistant cast aluminum alloys

Portevin-Le Chatelier characterization of annealed Al-Mg alloy sheets with different Mg contents

铝合金形变热处理研究进展及发展趋势

Sc含量对含Zr的Al-0.36Mg-1.23Si合金板材组织和性能的影响

Zr含量对汽车车身用Al-0.36Mg-1.23Si合金板材组织及性能的影响

The formation of three phases containing Fe and Mn in 5182 aluminum alloy

Effects of Mg content on microstructure, mechanical properties and fracture behavior of wrought Al–8Si–(<0.01–1.32)Mg alloy sheets in T6 temper

DC铸造7475铝合金中含铬弥散相非均匀分布的机理（英文）

析出相粒子组态对Al-0.67Mg-1.35Si-0.64Cu-0.61Mn板材n值的影响

预拉伸变形对欠时效7N01铝合金板材疲劳断裂的影响

含Mn合金相对T4态Al-0.35Mg-1.62Si-0.2Cu铝合金板材性能的影响

Zr对Al-10Zn-2.5Mg-1.6Cu合金板材组织与性能的影响

Al-0.12Zr合金中Zr元素的添加方法研究

冷变形对T4P态Al-Mg-Si板材在烤漆过程中的时效析出及软化行为的影响

Effect of Precipitates on the Mechanical Performance of 7005 Aluminum Alloy Plates

Improvement of microstructure and fatigue performance of wire-arc additive manufactured 4043 aluminum alloy assisted by interlayer friction stir processing

Effect of Post-Fabricated Aging on Microstructure and Mechanical Properties in Underwater Friction Stir Additive Manufacturing of Al–Zn–Mg–Cu Alloy

Mechanism of heterogeneous distribution of Cr-containing dispersoids in DC casting 7475 aluminum alloy

Effects of Pre-Tensile Deformation on the Fatigue Fracture Behavior of Annealed 7005 Aluminum Alloy Plate

Restirring and Reheating Effects on Microstructural Evolution of Al–Zn–Mg–Cu Alloy During Underwater Friction Stir Additive Manufacturing

DC铸造7475铝合金铸锭中合金元素的微观偏析

汽车车身用Al-Mg-Si-Cu-Mn合金板材强度与n值的相关性研究

DC铸造铝合金铸锭中含Cr弥散相粒子的析出行为

Enhancing the mechanical performance of Al–Zn–Mg alloy builds fabricated via underwater friction stir additive manufacturing and post-processing aging

Formation of Phases and Microstructures in Al-8Si Alloys with Different Mg Content

Phase Formation and Microstructure Evolution of Al-5Si-0.8Mg Alloys with Different Mn Concentrations

T4态轧制变形Al-(1.44-12.40)Si-0.7Mg合金板材屈服强度的预测（英文）

6N01铝合金挤压材显微组织及其力学性能的相关性

Yield strength prediction of rolled Al−(1.44−12.40)Si−0.7Mg alloy sheets under T4 condition

7B50铝合金淬透性及其临界平均冷却速率研究

7050合金固溶后在180～250℃等温淬火时的析出行为

Prediction of the Work-Hardening Exponent for 3104 Aluminum Sheets with Different Grain Sizes

铸锭不均匀化处理对Al-1.01Mg-1.11Si-0.38Cu-0.69Mn合金热轧板显微组织的影响

Mg含量对Al-xMg合金板材显微组织的影响

7B50超高强铝合金喷水淬火过程综合表面换热系数的计算（英文）

DC铸造Al-12Si-0.65Mg-xMn合金中第二相的形成

6082铝合金42 mm厚型材双面FSW焊接接头的组织与性能

Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy

Prediction of properties distribution of 7B50 alloy thick plates after quenching and aging by quench factor analysis method

Computation of synthetic surface heat transfer coefficient of 7B50 ultra-high-strength aluminum alloy during spray quenching

均匀化前预处理对Al-Zn-Mg-Cu合金中含V相析出及再结晶的影响

均匀化前预处理对7150铝合金中Al3Zr相析出及再结晶的影响

Al-3Si-0.6Mg-(Cu,Mn)合金薄板的组织性能

Two-step Aging Treatment in Ultra-High-Strength Al-Zn-Mg-Cu Aluminum Alloy

Evolution of Iron-containing Compounds in Al-Cu Alloys during Heat Treatment

浅谈热处理过程中AA5083铝合金的钎焊

加热条件对含镁共晶Al-Si合金半连续铸锭热轧的影响

Effect of homogenization treatment on microstructure and mechanical properties of DC cast 7X50 aluminum alloy

Measurement of TTP Curves of 7050 Aluminum Alloy by Conductivity

汽车车身用6016铝合金薄板应变硬化指数研究

7150-T7751铝合金厚板性能的不均匀性

应力对蠕变时效2524合金微观组织的影响(英文)

铝合金端淬轴向温度场测定新方法的研究

Effect of stress on microstructures of creep-aged 2524 alloy

固溶温度对新型Al-12.7Si-0.7Mg合金挤压材组织性能的影响

原铝液DC铸造2A12铝合金铸锭的高温均匀化研究

7×××系超高强铝合金的强韧化研究进展及发展趋势

Al-6.2Zn-2.3Mg-2.3Cu合金热压缩变形的流变应力与组织演变

外加载荷对2124合金微观组织和性能的影响

Effect of Additional Load on the Performance and Microstructure of 2124 Alloy

汽车车身用Al-Mg-Si-Cu合金薄板应变强化行为的研究

Al-6.2Zn-2.3Mg-2.3Cu铝合金厚板的双级时效工艺

7050合金半连续铸锭中结晶相及其均匀化处理

Al-6.5Zn-2.4Mg-2.3Cu铝合金半连续铸锭的均匀化处理

Al-1.3Si-0.7Mg-0.7Cu-0.3Mn铝合金薄板在固溶处理过程中的组织转变

7050铝合金半连续铸锭在DSC分析过程中组织的变化

2124铝合金在加载时效时的变形特点

Overheating temperature of 7B04 high strength aluminum alloy

Al-6.1Zn-2.6Mg-1.6Cu铝合金的回归再时效热处理(英文)