百晓学者学者目录

孙金全

副教授、博导、教授、硕导、讲师，山东科技大学

精选作品

期刊论文

2026

金属表面改性技术-渗氮后氧化的研究现状与展望

时明玄，陈曦，蔡玉铨，蔡梅贵，李培盛，辛永峰，王淑峰，孙金全

《材料热处理学报》

2026

Structure and Properties of C/N-Containing Fe3O4 Oxide Films Prepared by Oxynitriding Treatment

Yue Yu, Duo Ma, Tong Zhang, Yu-Fei Wang, Yupeng Wei, Mingxuan Shi, Yu-Quan Cai, Mei-Gui Cai, Pei Li, Yong Xin, Jinquan Sun

Coatings

DOI

2026

Effect of Passivation Film and Nitrogen Potential on Gas Nitriding Behavior and Tribological Performance of 1Cr11Ni2W2MoV Stainless Steel

Kai Wang, Lei Zhang, Tong Zhang, Qingkun He, Lingdan Qiao, Jinquan Sun

Lubricants

DOI

2026

Failure Analysis of Torque Wrench Ratchet Fracture

Jia-Hao Jin, Jian-Ming Zhai, Yue Yu, Lei Geng, Jiaqi Liu, Xi Chen, Pin Tao, Jinquan Sun

Journal of Failure Analysis and Prevention

DOI

2026

The preparation of highly corrosion-resistant Fe2O3/Fe3O4 layers by gas nitriding post-oxidizing treatment

Rui Sun, Yufei Wang, Wenlong Yang, Peisheng Li, Yongfeng Xin, Yuquan Cai, Meigui Cai, Shuaishuai Hou, Jinquan Sun

Materials Letters

DOI

2025

Failure analysis of hook type grasping friction pair for automatic friction welding type strapping

Lei Geng, Yue Yu, Jian-Ming Zhai, Jiaqi Liu, Jia-Hao Jin, Qingkun He, Jinquan Sun

Engineering Failure Analysis

DOI

2025

Effect of controlled nitrogen potential on the phase composition and corrosion resistance of gas nitrided 45# steel

Duo Ma, Yue Yu, Jiaqi Liu, X. Wang, Tong Zhang, Qingkun He, Yanpeng Xue, Jinquan Sun

Vacuum

DOI

2025

Failure Analysis and Performance Improvement of Conical Pick for Coal Mining Machines

Duo Ma, Yue Yu, Jiaqi Liu, X. Wang, Tong Zhang, Qingkun He, Yanpeng Xue, Jinquan Sun

Journal of Failure Analysis and Prevention

DOI

2024

Failure analysis of T15 medical orthopedic S46500 stainless steel screwdriver

Yi-Bo Zhao, Xianxian Guo, Jian-Qing Yao, Lei Geng, Qingkun He, Lei Zhang, Duo Ma, Jia-Hao Jin, Wenjun Wang, Jinquan Sun

Engineering Failure Analysis

DOI

2024

Fine structure control of Fe3O4/ Fe2O3 film by Nitridation-Oxidation-Reduction treatment and high corrosion resistance

Yi-Bo Zhao, Xianxian Guo, Da-Hong Wang, Lei Geng, Qingkun He, Wenjun Wang, Lei Zhang, Jia-Hao Jin, Duo Ma, Jinquan Sun

Materials letters (General ed.)

DOI

2023

Evaluation of 316L stainless mill additives on microstructure and alkali corrosive behavior of enamel coatings

Hao Hong, Wensheng Li, Cuixia Li, Ting Zhang, Chunzhi Zhang, Elena Alfredovna Yatsenko, Jin-Quan Sun, Shang Tang

Journal of the American Ceramic Society

DOI

2022

气体催化渗氮研究进展

于群，时垌，林威，孙金全，黄鑫，鲍建齐，王东瑞，杨洁，李福杰，谢鲲，李文生，陈蕴博

《材料热处理学报》

2022

钢的渗氮层耐蚀性研究进展

司晋伟，孙金全，鲍建齐，黄鑫，李福杰，杨洁，谢鲲，崔洪芝

《材料热处理学报》

2022

金属耐磨蚀表面复合处理绿色节能新技术

仲崇阳，孙金全，李福杰，赵宇航，杨洁，王鹏宇，张海峰，谢鲲，李文生

《金属加工(热加工)》

2022

The Effect of the Alloy Elements in Gradient Nanostructured Aisi 316l Stainless Steel on Gas Nitriding

Fu-Jun Li, Jinquan Sun, S. Cai, Yan-Peng Xue, Qingkun He, Jie Yang, K. Xie, Wensheng Li

Social Science Research Network

DOI

2022

In Situ Preparation of Nano-Cu/Microalloyed Gradient Coating with Improved Antifriction Properties

Jinquan Sun, Dongrui Wang, Jie Yang, Fu-Jun Li, Lingli Zuo, F. Ge, Yun-Bang Chen

Coatings

DOI

2022

Effect of trace water in ammonia on breaking passive film of stainless steel during gas nitriding

Tong Shi, Jinquan Sun, Xing-Wei Wang, Qing-Kun He, Jinwei Si, Dong-Rui Wang, K. Xie, Wensheng Li

Vacuum

DOI

2022

Failure analysis and improvement measures for crankshaft connecting rod of refrigerator compressor

Dongrui Wang, Jinquan Sun, Qing-Kun He, Jinwei Si, Tong-Hui Shi, Fu-Jun Li, Jie Yang, Kun Xie, Wensheng Li, F. Ge

Engineering Failure Analysis

DOI

2022

Isothermal Oxidation TGO Growth Behaviors of Laser-Remolten LZO/YSZ Thermal Barrier Coatings

Wensheng Li, Ziyu Li, Guosheng An, Bo Cheng, Qiang Song, Jinquan Sun, Victor Vaganov, Canming Wang, Георгий Георгиевич Горанский

Coatings

DOI

2022

Failure analysis of truck steering knuckle

Fujie Li, Jinquan Sun, Jianqi Bao, Jie Yang, Haotian Li, Chongyang Zhong, Yuchao Gao, Qingkun He, Kun Xie, Wensheng Li

Engineering Failure Analysis

DOI

2021

Strong effect of carbides and alloy elements in gradient nanostructured 32Cr2Mo1VE steel on nitrogen atom diffusion

S. Cai, Jinquan Sun, Yan-Peng Xue, Qing-Kun He, Ji-Cai Huan, Tong-tong Shi, Jinwei Si, Dongrui Wang, K. Xie

Materials Characterization

DOI

2021

16MnCr5 gear shaft fracture caused by inclusions and heat treatment process

S. Cai, Jinquan Sun, Qing-Kun He, Tong-tong Shi, Dongrui Wang, Jinwei Si, Jie Yang, Fu-Jie Li, K. Xie, Min Li

DOI

2019

气体催化渗氮对12Cr1MoV钢力学性能的影响

刘仲玉，王兴伟，孙金全，王万珍，赵昌德，陈蕴博，左玲立，谢鲲

《材料热处理学报》

DOI

2019

三元相图立体模型的设计及3D打印制作

谢鲲，曹梅青，丁建旭，夏鹏成，岳丽杰，孙金全，魏文阁

《中国现代教育装备》

DOI

2019

Residual stresses and wear properties of induction-hardened medium carbon steel

Qian-Cheng Liu, Y.-J. Cao, Jinquan Sun, Qing-Kun He, Y.-L. Tan, B.-M. Li, K. Xie

Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology

DOI

2019

Abrasive resistance and corrosion properties of AISI 316 sieve via low-temperature gaseous nitriding

Xingwei Wang, Zhongyun Liu, Yang-Yang Chen, Jinquan Sun, Qing-Kun He, Qian-Cheng Liu, Guozhi Liu, K. Xie

Surface & Coatings Technology

DOI

2019

Green preparation of copper/microalloyed gradient coating on crankshaft surface with improved wear resistance

Guozhi Liu, Jinquan Sun, Qian-Cheng Liu, Fei Ma, K. Xie, Lingli Zuo, Yun-bo Chen

Materials Research Express

DOI

2018

30CrMnMoV钢氮化力学性能研究

刘前程，孙金全，王万珍，赵昌德，陈蕴博，左玲立

《热处理技术与装备》

2018

AISI 316L不锈钢热处理表面贫铬分析与质量控制

王兴伟，刘国志，赫庆坤，路东宁，时垌，江允楠，高翔，马飞，谢鲲，孙金全

《金属加工(热加工)》

2018

变速器定子齿轮渗碳、渗氮硬化表面耐磨性研究

陈洋洋，刘前程，刘仲玉，高翔，谢鲲，孙金全

《热加工工艺》

2018

HT250刹车盘气体渗氮耐磨性研究

程相征，谢鲲，赫庆坤，高翔，陈洋洋，曹勇军，陈蕴博，孙金全

《摩擦学学报(中英文)》

2018

强化材料类专业实践教学改革培养高素质创新应用复合人才

夏鹏成，谢鲲，曹梅青，孙金全，李敏，姚树玉，岳丽杰

《山东化工》

2018

Improvement in dry-sliding wear properties and corrosion resistance of AISI 304 steel with low temperature gaseous nitriding

Yun-bo Chen, Jinquan Sun, Qing-Kun He, Fei Ma, Yongjun Cao, Xiang Gao, Sheng-Tang Zhang, K. Xie

DOI

2018

Lifespan assessment of carbonized slag removal chains by dry-sliding wear tests

Qian-Cheng Liu, Zhongyun Liu, Xingwei Wang, Guozhi Liu, Qing-Kun He, K. Xie, Jinquan Sun

Engineering Failure Analysis

DOI

2018

Green preparation of silver coating on AISI 304 stainless steel surface by Ag nanocrystalline in-situ growth and the wear resistance

Guozhi Liu, Xiang Gao, Qing-Kun He, Xingwei Wang, Qian-Cheng Liu, Zhongyun Liu, K. Xie, Jinquan Sun

Applications of Surface Science

DOI

2018

Failure analysis of tungsten carbide bearing on screw drill

Qian-Cheng Liu, Mei Cui, Qing-Kun He, Zhongyun Liu, Yanping Liang, K. Xie, Jinquan Sun

Engineering Failure Analysis

DOI

2017

凹槽类零件漏磁控制感应淬火

高翔，程相征，马飞，谢鲲，李保民，孙金全

《金属热处理》

2017

海洋大气环境中含稀土耐候钢暴露1年的耐蚀性能研究

陶鹏，孙金全，董彩常，杨海洋，张波

《装备环境工程》

2017

Effect of the microstructure and residual stress on tribological behavior of induction hardened GCr15 steel

Yang Cao, Jinquan Sun, Fei Ma, Y.Y. Chen, Xuezhen Cheng, Xingke Gao, Kun Xie

Tribology International

DOI

2016

金属材料科学与工程专业生产实习教学改革与探讨

孙金全，谢鲲，李敏，崔洪芝

《教育教学论坛》

2016

预处理组织对20CrMnMo钢气体渗氮耐磨性的影响

高翔，邵丹，谢鲲，赫庆坤，程相征，孙金全

《材料热处理学报》

2015

GCr15钢表面感应淬火微观组织及室温干滑动磨损行为

王泽宁，崔洪芝，张国松，王伟，孙金全，程贵勤

《材料热处理学报》

2015

50CrMo4钢感应淬火微观组织和磨损机制

王伟，崔洪芝，王泽宁，孙金全，李保民

《材料热处理学报》

2015

Microstructure and properties of plasma remelted AZ91D magnesium alloy

Hong-Zhi Cui, Zhaobin Meng, C. Xiao, Jinquan Sun, Cui-Ling Wang

DOI

2014

影响铝型材挤压模具寿命因素的分析

王泽宁，孙金全，崔洪芝，李辉平，李保民

《热处理技术与装备》

2013

GCr15钢滚珠丝杠感应淬火漏磁控制及耐磨性

崔洪芝，李永凤，孙金全，李保民，陈鑫，白斌

《材料热处理学报》

2013

不锈钢低温渗氮/渗碳S相渗层技术的研究进展

孙金全，崔洪芝，赫庆坤，刘赞，陶鹏，阎璐

《热处理技术与装备》

2013

电火花加工对奥氏体不锈钢气体渗氮的影响

谢鲲，孙金全，夏鹏成，曹梅青，岳丽杰

《材料热处理学报》

2013

The Progress of Study on S-phase Technology by Low Temperature Nitriding /Carburizing of Stainless Steel

Jinquan Sun

2013

In-situ preparation method of silver functional coating

Jinquan Sun, Hong-Zhi Cui, Dan Shao, Qing-Kun He, Hui-Ping Li, De-Fang Yu, He Zhang

2012

AZ91D镁合金等离子束重熔组织与性能

崔洪芝，肖成柱，孙金全，杨红光

《中国有色金属学报》

2012

Device and method for evaluating relation of interface temperature and interface heat exchange coefficient

Fang He Lian, Huiping Li, Hong-Zhi Cui, Jinquan Sun

2011

AZ91表面熔滴涂覆Al涂层的研究

谢鲲，崔洪芝，孙金全，夏鹏成，岳丽杰，曹梅青，陈蕴博

《稀有金属材料与工程》

2011

Salt-assisted synthesis of tree-like oriented SnO2 nanodendrite

Jinquan Sun, Zifeng Yan, Hong-Zhi Cui

DOI

2011

Laser Cladding of Ni-Based Alloy on Mg Alloy with Brass Transition

Qing-Kun He, Hong-Zhi Cui, Shao-Hua Huang, Jinquan Sun, Hong-Guang Yang, Yong-Feng Li

DOI

2011

Microstructure and Corrosion Resistance of AM60 Magnesium Alloy Modified by Plasma Surface Treatment

Hong-Zhi Cui, Jinquan Sun, C. Xiao, Hong-Guang Yang

DOI

2011

Wear Resistance Property of AM60 Magnesium Alloy Modified by Plasma Surface Treatment

Jinquan Sun, Zifeng Yan, Hong-Zhi Cui, Qing-Kun He, Hong-Guang Yang, C. Xiao

DOI

2010

Surface catalysis gaseous nitriding of alloy cast iron at lower temperature

Jinquan Sun, Zifeng Yan, Hong-Zhi Cui, Jie Li, Ji-Sen Wang, Yun-bo Chen

DOI

2009

AZ91镁合金表面等离子熔凝处理及耐蚀性研究

崔洪芝，张海波，孙金全，曹丽丽，肖成柱

《材料工程》

2009

Preparation of Manganese Oxide Nanobelts

Ji-Sen Wang, Jinquan Sun, Y. Bao, Xiu-Lan Bian

2008

交流电预处理对铁低温渗氮的影响

王积森，冯忠彬，孙金全，张国松，贾明剑，宋振雷

《材料导报》

2007

Synthesis of Chromium Hemitrioxide Nanorods and Nanowires and the Solid‐State Growth Mechanism

Ji-Sen Wang, Jinquan Sun, Xiu-Lan Bian

DOI

2007

Preparation of SnO2 nanorods via oriented aggregation of nanoparticles

Ji-Sen Wang, Jinquan Sun, Guo-Song Zhang, Xiucun Wu, Y. Bao, Hui Li, Dai-Rong Chen

DOI

2006

Low temperature nitriding of medium carbon steel

Ji-Sen Wang, Guo-Song Zhang, Jinquan Sun, Y. Bao, L. Zhuang, Haifang Wen

DOI

2006

Low temperature nitriding of iron by alternating current pretreatment

Ji-Sen Wang, Guo-Song Zhang, Jinquan Sun, Y. Bao, L. Zhuang, Hong-Tao Ning

DOI

2006

Novel route to dendritic SnO2 nanostructure via ethanol-assisted controlled borohydride reduction

Ji-Sen Wang, Jinquan Sun, Guo-Song Zhang, Xiucun Wu, Y. Bao, Hui Li, Dai-Rong Chen

DOI

2006

Novel Method for High-Yield Synthesis of Rutile SnO2 Nanorods by Oriented Aggregation

Jinquan Sun, J. Wang, Xiucun Wu, Guo S. Zhang, Junsheng Wei, S. Q. Zhang, Hong Li, Dai-Rong Chen

DOI

2004

Transformation mechanism among various nano-morphologies

J.-Y. Wang, Xiu-Lan Bian, Jinquan Sun

2004

A Novel Method of Synthesizing One-Dimensional Nanomaterials via Solid-Phase Transition

Ji-Sen Wang, Jinquan Sun

2004

Synthesis of copper oxide nanomaterials and the growth mechanism of copper oxide nanorods

Ji-Sen Wang, Jin-Kai Yang, Jinquan Sun, Y. Bao

DOI

2004

Preparation of oriented TiO2 nanobelts by microemulsion technique

Ji-Sen Wang, Jinquan Sun, Xiu-Lan Bian

DOI

2004

Preparation of crystalline manganese oxides hollow spheres

Ji-Sen Wang, Jin-Kai Yang, Y. Bao, Jinquan Sun

DOI

会议论文

2015

预处理组织对20CrMnMo链条轴气体渗氮耐磨性的影响

孙金全，高翔，谢鲲，陶鹏，王新明，崔洪芝

《第十一次全国热处理大会》

此主页由公开资料整理，尚未经学者本人认领。