张洪武

期刊论文

1. 叶宏飞，王健，尹晨光，张洪武，郑勇刚（2025）. 数据驱动的高精度水模型及在低维限域流体计算中的应用. 《中国力学大会-2025摘要集（第一册）》.DOI
2. Jian Wang, Haitao Hei, Hongfei Ye, Yonggang Zheng, Hongwu Zhang (2025). Untangling the Diffusion Mechanism of Water in a Heterogeneous Nanochannel. Langmuir.DOI
3. Chengxuan Li, Hanbo Zhang, Cunliang Pan, Hongfei Ye, Hongwu Zhang, Yonggang Zheng (2025). Implicit stabilized non-ordinary state-based peridynamics for finite deformation and fracture analysis of nearly incompressible materials. Computer Methods in Applied Mechanics and Engineering.DOI
4. 郑勇刚，吴哲同，张涵博，刘振海，叶宏飞，张洪武（2024）. 基于弹性力学第一性原理的数据驱动力学建模. 《计算力学学报》.
5. Yonggang Zheng, Zhenhai Liu, Yisong Qiu, Wei Sun, Hongfei Ye, Hongwu Zhang (2024). A Fast Time-Discontinuous Peridynamic Method for Stress Wave Propagation Problems in Saturated Porous Media. International Journal of Applied Mechanics.DOI
6. Yonggang Zheng, Shun Zhang, Weilong Yang, Zijian Zhang, Hongfei Ye, Hongwu Zhang (2024). Adaptive phase-field total Lagrangian material point method for evaluating dynamic fracture of soft material. Engineering With Computers.DOI
7. Hongfei Ye, Dong Li, Hongwu Zhang, Yonggang Zheng (2024). Tension, Shear and Bending Properties of Two-Dimensional Materials. International Conference on Computational & Experimental Engineering and Sciences.DOI
8. Yisong Qiu, Hongfei Ye, Shuaiqi Zhang, Hongwu Zhang, Yonggang Zheng (2024). Hydrogel-Based Network Metamaterials with Biological Tissue-like Poisson’s Ratio Behavior and Stress Response. ACS Applied Materials & Interfaces.DOI
9. Jian Wang, Haitao Hei, Yonggang Zheng, Hongwu Zhang, Hongfei Ye (2024). Five-Site Water Models for Ice and Liquid Water Generated by a Series–Parallel Machine Learning Strategy. Journal of Chemical Theory and Computation.DOI
10. Zhenhai Liu, Tianfeng Jiang, Hongfei Ye, Hongwu Zhang, Yonggang Zheng (2024). A time-discontinuous peridynamic method for coupled thermomechanical and transient heat conduction problems. International Journal of Heat and Mass Transfer.DOI
11. Hanbo Zhang, Zhenhai Liu, Chengxuan Li, Chengxuan Li, Hongfei Ye, Hongwu Zhang, Hui Li, Yonggang Zheng (2024). A stabilized peridynamic correspondence material model for axisymmetric ablation and fracture problems. Computers & Structures.DOI
12. Zhetong Wu, Hanbo Zhang, Hongfei Ye, Hongwu Zhang, Yonggang Zheng, Xu Guo (2024). PINN enhanced extended multiscale finite element method for fast mechanical analysis of heterogeneous materials. Acta Mechanica.DOI
13. Cunliang Pan, Shi Feng, Shengyang Tao, Hongwu Zhang, Yonggang Zheng, Hongfei Ye (2024). Physics-informed neural network for solving Young–Laplace equation and identifying parameters. Physics of Fluids.DOI
14. Jian Wang, Haitao Hei, Yonggang Zheng, Hongwu Zhang, Hongfei Ye (2024). Series-Parallel Machine Learning-Generated Five-Site Water Models for Ice Ih and Liquid: TIP5P-BG and TIP5P-BGT. International Conference on Computational & Experimental Engineering and Sciences.DOI
15. Cunliang Pan, Shi Feng, Shengyang Tao, Hongwu Zhang, Yonggang Zheng, Hongfei Ye (2024). Physics-Informed Neural Network for Young-Laplace Equation. International Conference on Computational & Experimental Engineering and Sciences.DOI
16. Zhangcheng Zheng, Zi-jian Zhang, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2023). Distance minimizing based data‐driven computational method for the finite deformation of hyperelastic materials. International Journal for Numerical Methods in Engineering.DOI
17. Yi-Song Qiu, Hongfei Ye, Shuai Zhang, Hongwu Zhang, Yong-Gang Zheng (2023). An explicit structural optimization method for temperature-sensitive hydrogel actuation devices. Composite structures.DOI
18. Yu Liu, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2023). Coupling phase-field LB and MPM for multiphase fluid-deformable solid interaction problems involving large density and viscosity contrasts. International Journal of Applied Mechanics.DOI
19. Zi-jian Zhang, Zhiqiang Hu, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2023). A mixed three‐field total Lagrangian material point method for phase‐field fracture modeling of nearly incompressible rubber‐like solids.DOI
20. Zhiqiang Hu, Yu Liu, Zi-jian Zhang, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2023). Coupling Explicit Phase-field MPM for Two-Dimensional Hydromechanical Fracture in Poro-elastoplastic Media. International Journal of Mechanical Sciences.DOI
21. Zhiqiang Hu, Zi-jian Zhang, Xu Zhou, Xiao-Xiao Cui, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2023). Explicit phase-field material point method with the convected particle domain interpolation for impact/contact fracture in elastoplastic geomaterials. Computer Methods in Applied Mechanics and Engineering.DOI
22. Huayuan Tang, Hongfei Ye, Hongwu Zhang, Xin Yi, Yonggang Zheng (2023). Angle-dependent protrusion of cell membranes. Journal of the Mechanics and Physics of Solids.DOI
23. Zhangcheng Zheng, Yisong Qiu, Hongfei Ye, Hongwu Zhang, Yonggang Zheng (2023). Data-driven computational method for growth-induced deformation problems of soft materials. Acta Mechanica.DOI
24. Yisong Qiu, Hongfei Ye, Hongwu Zhang, Yonggang Zheng (2023). Machine learning-driven optimization design of hydrogel-based negative hydration expansion metamaterials. Computer-Aided Design.DOI
25. Dong Li, Junfei Zhao, Yonggang Zheng, Hongwu Zhang, Hongfei Ye (2023). General analytical algorithm of mechanical properties for 1H−MX2 transition metal dioxides and dichalcogenides. Physical review. B./Physical review. B.DOI
26. Hanbo Zhang, Hanbo Zhang, Hui Li, Hongfei Ye, Hongfei Ye, Yonggang Zheng, Hongwu Zhang, Yonggang Zheng (2023). A coupled axisymmetric peridynamics with correspondence material model for thermoplastic and ductile fracture problems. International Journal of Fracture.DOI
27. Yonggang Zheng, Hanbo Zhang, Jingyan Li, Hui Li, Hongfei Ye, Hongwu Zhang (2023). A Coupled Peridynamics Model for the Ablation and Plastic Fracture Simulation of Reactor Pressure Vessels. International Conference on Computational & Experimental Engineering and Sciences.DOI
28. Dong Li, Yonggang Zheng, Hongwu Zhang, Hongfei Ye (2023). The Mechanical Property of 2D Materials and Potential Application in Gas Separation. International Conference on Computational & Experimental Engineering and Sciences.DOI
29. 段晓璐，叶鑫，黑海涛，郑勇刚，张洪武，叶宏飞（2022）. 纳米尺度通道壁面润湿性与流体滑移长度的控制关系研究. 《中国力学大会-2021+1论文集（第五册）》.DOI
30. 李东，姚婷婷，黑海涛，郑勇刚，张洪武，叶宏飞（2022）. 计及界面交联的碳纳米管/双马来酰亚胺复合材料力学性质的模拟研究. 《中国力学大会-2021+1论文集（第五册）》.DOI
31. 黑海涛，叶宏飞，郑勇刚，陈震，张洪武（2022）. 纳米尺度二维材料碰撞行为的数值模拟研究. 《中国力学大会-2021+1论文集（第五册）》.DOI
32. Zijian Zhang, Yi-Song Qiu, Zhiqiang Hu, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2022). Explicit phase-field total Lagrangian material point method for the dynamic fracture of hyperelastic materials. Computer Methods in Applied Mechanics and Engineering.DOI
33. Zhiqiang Hu, Hongwu Zhang, Yong-Gang Zheng, Hongfei Ye (2022). Phase-field implicit material point method with the convected particle domain interpolation for brittle–ductile failure transition in geomaterials involving finite deformation. Computer Methods in Applied Mechanics and Engineering.DOI
34. Zhangcheng Zheng, Hongwu Zhang, Hongfei Ye, Yong-Gang Zheng (2022). Distance Minimizing based Data-Driven Computational Plasticity Method with Fixed Dataset. International Journal of Applied Mechanics.DOI
35. Jie Xu, Xuegang Yuan, Hongwu Zhang, Minfu Ma, Wei Zhao (2022). Internal resonance of hyperelastic thin-walled cylindrical shells under harmonic axial excitation and time-varying temperature field. Thin-Walled Structures.DOI
36. Chengxuan Li, Hanbo Zhang, Hongfei Ye, Hongwu Zhang, Yonggang Zheng (2022). An improved stabilized peridynamic correspondence material model for the crack propagation of nearly incompressible hyperelastic materials. Computer Methods in Applied Mechanics and Engineering.DOI
37. Zhenhai Liu, Jiayong Zhang, Hanbo Zhang, Hanbo Zhang, Hongfei Ye, Hongwu Zhang, Hongwu Zhang, Yonggang Zheng (2022). Time-discontinuous state-based peridynamics for elasto-plastic dynamic fracture problems. Engineering Fracture Mechanics.DOI
38. 许杰，袁学刚，张洪武（2021）. 超弹性薄壁圆柱壳在轴向激励作用下的非线性振动. 《第十八届全国非线性振动暨第十五届全国非线性动力学和运动稳定性学术会议（NVND2021）摘要集》.DOI
39. 段晓璐，叶鑫，郑勇刚，张洪武，叶宏飞（2021）. 纳米尺度通道内的界面流体粘性研究. 《计算力学学报》.
40. Zhiqiang Hu, Yu Liu, Hongwu Zhang, Yong-Gang Zheng, Hongfei Ye (2021). Implicit Material Point Method with Convected Particle Domain Interpolation for Consolidation and Dynamic Analysis of Saturated Porous Media with Massive Deformation.DOI
41. Jie Xu, Xue-Gang Yuan, Jia Jiao, Hongwu Zhang (2021). Computation of axisymmetric nonlinear low-frequency resonances of hyperelastic thin-walled cylindrical shells.DOI
42. Zijian Zhang, Yun-Xiang Pan, Jianhua Wang, Hongwu Zhang, Zhen Chen, Yong-Gang Zheng, Hongfei Ye (2021). A total‐Lagrangian material point method for coupled growth and massive deformation of incompressible soft materials. International Journal for Numerical Methods in Engineering.DOI
43. Zhentao Zhao, Xue-Gang Yuan, Wen-Zheng Zhang, Da-Tian Niu, Hongwu Zhang (2021). Dynamical modeling and analysis of hyperelastic spherical shells under dynamic loads and structural damping. Applied Mathematical Modelling.DOI
44. Hui Liu, Dongsheng Yang, Jing-Kai Wu, Yong-Gang Zheng, Hongwu Zhang (2021). An Open-Source MATLAB Implementation for elastic analysis of heterogeneous materials using the Extended Multiscale Finite Element Method. International Journal for Multiscale Computational Engineering.DOI
45. Meng-Kai Lu, Yong-Gang Zheng, Jian-Ke Du, Liang Zhang, Hongwu Zhang (2021). An adaptive multiscale finite element method for strain localization analysis with the Cosserat continuum theory. European Journal of Mechanics. A, Solids.DOI
46. Zhentao Zhao, Xue-Gang Yuan, Da-Tian Niu, Wen-Zheng Zhang, Hongwu Zhang (2021). Phenomena of Bifurcation and Chaos in the Dynamically Loaded Hyperelastic Spherical Membrane Based on a Noninteger Power-Law Constitutive Model. International Journal of Bifurcation and Chaos in Applied Sciences and Engineering.DOI
47. Yi-Song Qiu, Shuai Zhang, Wei-Sheng Zhang, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2021). Coupling Moving Morphable Voids and Components Based Topology Optimization of Hydrogel Structures Involving Large Deformation. Journal of applied mechanics.DOI
48. Jianhua Wang, Yi-Song Qiu, Hongwu Zhang, Yong-Gang Zheng, Hongfei Ye (2021). A solid-shell finite element method for the anisotropic swelling of hydrogels with reinforced fibers.DOI
49. 叶宏飞，李东，姚婷婷，郑晓飞，吴迪，郑勇刚，张洪武（2020）. 碳纳米管改性的双马来酰亚胺树脂力学性质的分子尺度模拟研究. 《计算力学学报》.
50. Yong-Gang Zheng, Jianhua Wang, Hongfei Ye, Shan Jiang, Hongwu Zhang (2020). A mixed isogeometric analysis approach for the transient swelling of hydrogel.DOI
51. Jie Xu, Xue-Gang Yuan, Hongwu Zhang, F. Zheng, Li-Qun Chen (2020). Nonlinear Vibrations of Thermo-Hyperelastic Moderately Thick Cylindrical Shells with 2:1 Internal Resonance.DOI
52. Yu Liu, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng (2020). Coupling lattice Boltzmann and material point method for fluid‐solid interaction problems involving massive deformation. International Journal for Numerical Methods in Engineering.DOI
53. Zhangcheng Zheng, Hongfei Ye, Hongwu Zhang, Yong-Gang Zheng, Zhen Chen (2020). MULTI-LEVEL K-d TREE-BASED DATA-DRIVEN COMPUTATIONAL METHOD FOR THE DYNAMIC ANALYSIS OF MULTI-MATERIAL STRUCTURES.DOI
54. Zhenhai Liu, Hongfei Ye, D. Qian, Hongwu Zhang, Yong-Gang Zheng (2020). A time‐discontinuous peridynamic method for transient problems involving crack propagation. International Journal for Numerical Methods in Engineering.DOI
55. J. Lv, Chang-Lie Song, Yong-Gang Zheng, Hongwu Zhang (2020). Extended multiscale finite element method based on polyhedral coarse grid elements for heterogeneous materials and structures.DOI
56. J. Lv, M. Zheng, Liang Zhang, C. Song, Hongwu Zhang (2020). Geometrically nonlinear analysis of 3D fluid actuated cellular structures using extended multiscale finite element method. International Journal of Mechanics and Materials in Design.DOI
57. Zhentao Zhao, Da-Tian Niu, Hongwu Zhang, Xue-Gang Yuan (2020). Nonlinear dynamics of loaded visco-hyperelastic spherical shells. Nonlinear dynamics.DOI
58. J. Lv, Xingyu Ren, Chang-Lie Song, Hongwu Zhang (2020). Two-Scale Topology Optimization of the 3D Plant-Inspired Adaptive Cellular Structures for Morphing Applications.DOI
59. J. Tao, Yong-Gang Zheng, Hongwu Zhang, Zhen Chen (2020). Axisymmetric Generalized Interpolation Material Point Method for Fully Coupled Thermomechanical Evaluation of Transient Responses.DOI
60. Yong-Gang Zheng, Han-Bo Zhang, J. Lv, Hongwu Zhang (2020). An arbitrary multi-node extended multiscale finite element method for thermoelastic problems with polygonal microstructures. International Journal of Mechanics and Materials in Design.DOI
61. Jianhua Wang, Hongwu Zhang, Yong-Gang Zheng, Hongfei Ye (2020). High-order NURBS elements based isogeometric formulation for swellable soft materials.DOI
62. Liang Zhang, Kai-Jun Dong, Meng-Kai Lu, Hongwu Zhang (2020). A wrinkling model for pneumatic membranes and the complementarity computational framework. Computational Mechanics.DOI
63. 黄东威，吴锋，钟万勰，张洪武（2019）. 基于位移法浅水波理论波浪破碎数值模拟. 《第三十届全国水动力学研讨会暨第十五届全国水动力学学术会议论文集(上册)》.DOI
64. Hongwu Zhang, Hui Li, Hongfei Ye, Yong-Gang Zheng, Yixion Zhang (2019). A coupling extended multiscale finite element and peridynamic method for modeling of crack propagation in solids. Acta Mechanica.DOI
65. Zhentao Zhao, Wen-Zheng Zhang, Hongwu Zhang, Xue-Gang Yuan (2019). Some interesting nonlinear dynamic behaviors of hyperelastic spherical membranes subjected to dynamic loads. Acta Mechanica.DOI
66. Hongwu Zhang, Hui Li, Hongfei Ye, Yong-Gang Zheng (2019). A coupling peridynamic approach for the consolidation and dynamic analysis of saturated porous media. Computational Mechanics.DOI
67. Jie Xu, Xue-Gang Yuan, Hongwu Zhang, Zhentao Zhao, Wei Zhao (2019). Combined effects of axial load and temperature on finite deformation of incompressible thermo-hyperelastic cylinder. Applied Mathematics and Mechanics.DOI
68. Yong-Gang Zheng, Jianhua Wang, Hongfei Ye, Yin Liu, Hongwu Zhang (2019). A solid-shell based finite element model for thin-walled soft structures with a growing mass. International Journal of Solids and Structures.DOI
69. 王冰冰，段庆林，李锡夔，张洪武，杨迪雄（2018）. 薄板弯曲分析的高阶高效无网格法. 《固体力学学报》.
70. 李辉，郑勇刚，叶宏飞，张洪武（2018）. 单相固体裂纹准静态扩展耦合扩展多尺度有限元和近场动力学方法. 《2018年全国固体力学学术会议摘要集（上）》.
71. 卢梦凯，郑勇刚，张洪武（2018）. 固体动力和波传播问题的时间间断物质点方法. 《2018年全国固体力学学术会议摘要集（上）》.
72. 赵振涛，袁学刚，张洪武，赵巍，张文正（2018）. 不可压缩超弹性Rivlin类材料组成球形薄壳动力响应. 《大连理工大学学报》.
73. Ran Wang, Xue-Gang Yuan, Hongwu Zhang, Jie Xu, Jing Zhang (2018). Some Interesting Traveling Waves in a Transversely Isotropic Incompressible Hyperelastic Semi-infinite Rod.DOI
74. Ran Wang, Xue-Gang Yuan, Hongwu Zhang, Jing Zhang, N. Lv (2018). Symmetry transformations and exact solutions of a generalized hyperelastic rod equation.DOI
75. Hui Li, Hongwu Zhang, Yong-Gang Zheng, Hongfei Ye, Meng-Kai Lu (2018). An Implicit Coupling Finite Element and Peridynamic Method for Dynamic Problems of Solid Mechanics with Crack Propagation.DOI
76. Sheng-Zhe Wang, Lu-Ming Shen, F. Maggi, A. El-Zein, G. Nguyen, Yong-Gang Zheng, Hongwu Zhang, Zhen Chen (2018). Influence of dry density and confinement environment on the high strain rate response of partially saturated sand. International Journal of Impact Engineering.DOI
77. 王冰冰，段庆林，李锡夔，张洪武，杨迪雄（2017）. 基于四边形积分子域的一致性高阶无网格法. 《计算力学学报》.
78. 张亮，张洪武，张卉婷，严波（2017）. 柔性薄膜褶皱变形的二次规划算法和三维数字散斑实验. 《第十一届南方计算力学学术会议（SCCM-11）》.
79. 邵玉龙，段庆林，高欣，李锡夔，张洪武（2017）. 自适应一致性高阶无单元伽辽金法. 《力学学报》.
80. 卢梦凯，张洪武，郑勇刚（2017）. 应变局部化分析的嵌入强间断多尺度有限元法. 《力学学报》.
81. 吴凡，李书卉，段庆林，李锡夔，张洪武（2017）. 基于近场动力学方法的水力压裂过程数值模拟. 《计算机辅助工程》.
82. 邵玉龙，段庆林，李锡夔，张洪武（2017）. 功能梯度材料的二阶一致无网格法. 《工程力学》.
83. J. Tao, Hongwu Zhang, Yong-Gang Zheng, Zhen Chen (2017). Development of generalized interpolation material point method for simulating fully coupled thermomechanical failure evolution.DOI
84. Meng-Kai Lu, Hongwu Zhang, Yong-Gang Zheng, Liang Zhang (2017). A multiscale finite element method for the localization analysis of homogeneous and heterogeneous saturated porous media with embedded strong discontinuity model.DOI
85. Yin Liu, Shen-Yang Liang, Qun Huang, Heng Hu, Yong-Gang Zheng, Hongwu Zhang, Q. Shao (2017). A robust Riks-like path following method for strain-actuated snap-through phenomena in soft solids.DOI
86. Ran Wang, Wen-Zheng Zhang, Zhentao Zhao, Hongwu Zhang, Xue-Gang Yuan (2017). Radially and axially symmetric motions of a class of transversely isotropic compressible hyperelastic cylindrical tubes.DOI
87. Yong-Gang Zheng, Meng-Kai Lu, Jiayong Zhang, Hongwu Zhang, Zhen Chen (2017). Time-discontinuous Material Point Method for Transient Problems involving Discontinuities in Stress.DOI
88. 赵巍，袁学刚，张洪武（2016）. 结构和材料参数对一类可压缩超弹性圆柱管翻转变形影响. 《大连理工大学学报》.
89. 张洪武，郑勇刚（2016）. “复杂装备研发数字化工具中的计算力学和多场耦合若干前沿问题”立项报告. 《科技创新导报》.
90. 张昭，葛芃，张洪武（2016）. 焊接叶轮残余应力的数值模拟. 《兵器材料科学与工程》.
91. 张洪武，卢梦凯，郑勇刚（2016）. 非均质饱和多孔介质弹塑性动力分析的广义耦合扩展多尺度有限元法. 《计算力学学报》.
92. Liang Zhang, Q. Gao, Yin Liu, Hongwu Zhang (2016). An efficient finite element formulation for nonlinear analysis of clustered tensegrity.DOI
93. Yin Liu, Hongwu Zhang, Jiayong Zhang, Yong-Gang Zheng (2016). Transient swelling of polymeric hydrogels: A new finite element solution framework.DOI
94. Meng-Kai Lu, Hongwu Zhang, Yong-Gang Zheng, Liang Zhang (2016). A multiscale finite element method with embedded strong discontinuity model for the simulation of cohesive cracks in solids.DOI
95. J. Lv, Liang Tang, Wenbo Li, Lei Liu, Hongwu Zhang (2016). Topology optimization of adaptive fluid-actuated cellular structures with arbitrary polygonal motor cells.DOI
96. Hui Li, Hongwu Zhang, Yong-Gang Zheng, Liang Zhang (2016). A peridynamic model for the nonlinear static analysis of truss and tensegrity structures.DOI
97. Yin Liu, Hongwu Zhang, Yong-Gang Zheng (2016). A Micromechanically Based Constitutive Model for the Inelastic and Swelling Behaviors in Double Network Hydrogels.DOI
98. Xin Gao, Q. Duan, Yu-Long Shao, Xi-Kui Li, Biaosong Chen, Hongwu Zhang (2016). Quadratically consistent one-point (QC1) integration for three-dimensional element-free Galerkin method.DOI
99. J. Lv, Hui Liu, Hongwu Zhang, Lei Liu (2016). Multiscale Method for Geometrical Nonlinear Analysis of Fluid Actuated Cellular Structures with Arbitrary Polygonal Microstructures.DOI
100. Bing-Bing Wang, Q. Duan, Yu-Long Shao, Xi-Kui Li, Di-Xiong Yang, Hongwu Zhang (2016). An efficient nodal integration with quadratic exactness for three-dimensional meshfree Galerkin methods.DOI
101. Hongwu Zhang, Meng-Kai Lu, Yong-Gang Zheng（2016）. 非均質飽和多孔質媒体の弾塑性動的解析の一般化結合拡張マルチスケール有限要素法【JST・京大機械翻訳】.
102. J. Tao, Yong-Gang Zheng, Zhen Chen, Hongwu Zhang (2016). Generalized interpolation material point method for coupled thermo-mechanical processes. International Journal of Mechanics and Materials in Design.DOI
103. Yin Liu, Hongwu Zhang, Jianhua Wang, Yong-Gang Zheng (2016). Anisotropic Swelling in Fiber-reinforced Hydrogels: An Incremental Finite Element Method and Its Applications in Design of Bilayer Structures.DOI
104. 赵磊，张昭，王松，张洪武（2015）. 燃油箱吊座焊缝的强度和疲劳有限元分析. 《计算机辅助工程》.
105. 田宇，张昭，张洪武（2015）. 基于概率断裂力学的管道疲劳寿命分析. 《计算机辅助工程》.
106. 王然，袁学刚，张洪武，张文正（2015）. 一类可压缩超弹性圆柱形管的非线性行波解. 《第十五届全国非线性振动暨第十二届全国非线性动力学和运动稳定性学术会议》.
107. 赵巍，袁学刚，张洪武，牛大田（2015）. 翻转后不可压缩超弹性圆柱管径向振动的稳定性. 《第十五届全国非线性振动暨第十二届全国非线性动力学和运动稳定性学术会议》.
108. 陈玉震，张盛，陈飙松，张洪武（2015）. 非均质结构非平稳随机响应的快速算法. 《振动与冲击》.
109. 王冰冰，段庆林，高欣，李锡夔，张洪武（2015）. 薄板弯曲分析的一致性高阶无网格法. 《中国力学大会-2015论文摘要集》.
110. 陈玉震，彭海军，张盛，陈飙松，张洪武（2015）. 具有输入时滞的大规模结构动力系统快速模型预测控制算法研究. 《中国力学大会-2015论文摘要集》.
111. 叶宏飞，郑勇刚，张洪武，陈震（2015）. 含液碳纳米管在电场中的力学特性研究. 《中国力学大会-2015论文摘要集》.
112. 高欣，段庆林，王冰冰，李锡夔，张洪武（2015）. 脆性裂纹扩展的一致性高阶无网格法. 《中国力学大会-2015论文摘要集》.
113. 吕军，张洪武，高效伟（2015）. 含液闭孔蜂窝材料与结构几何非线性多尺度计算方法研究. 《中国力学大会-2015论文摘要集》.
114. 杨东生，张盛，张洪武（2015）. 基于耦合扩展多尺度有限元方法的功能梯度材料热应力分析. 《复合材料学报》.
115. 黄佳，尹进，张昭，张洪武（2015）. 圆管型局域共振声子晶体三维构型振动带隙研究. 《计算力学学报》.
116. Yin Liu, Yonggang Zheng, Hongwu Zhang (2015). Stress-softening and stretch-induced anisotropy in double network hydrogels: A micro-mechanically based constitutive model. 《北京国际力学中心“软物质中的分岔与失稳”国际研讨会》.
117. Junlong Lyu, Hongwu Zhang, Xiao-Wei Gao (2015). Multiscale Method for Mechanical Analysis of Pressure-actuated Cellular Structures with Polygonal Microstructures.
118. Hongwu Zhang, Meng-Kai Lu, Yong-Gang Zheng, Sheng Zhang (2015). General coupling extended multiscale FEM for elasto‐plastic consolidation analysis of heterogeneous saturated porous media.DOI
119. J. Lv, Guoyu Sheng, Xiao-Wei Gao, Hongwu Zhang (2015). Numerical Integration Approach Based on Radial Integration Method for General 3D Polyhedral Finite Elements.DOI
120. Yin Liu, Hongwu Zhang, Jiayong Zhang, Yong-Gang Zheng (2015). Constitutive modeling for polymer hydrogels: A new perspective and applications to anisotropic hydrogels in free swelling.DOI
121. J. Lv, Hongwu Zhang, Xiao-Wei Gao, Yi Huang (2015). A new multiscale computational method for electromechanically coupled analysis of heterogeneous piezoelectric composites.DOI
122. Qi Wu, Hongwu Zhang, Z. Wan, Zhao Zhang (2015). Numerical studies on grain growth in friction stirwelding.
123. Qi Wu, Zhao Zhang, Hongwu Zhang（2015）. CFDに基づく モデルの撹拌摩擦溶接頭撹拌力を分析した。【JST・京大機械翻訳】.
124. Zheng-wei Zhang, Zhao Zhang, Hongwu Zhang (2015). Effect of residual stress of friction stir welding on the fatigue life of AA 2024-T351 joint.DOI
125. Yin Liu, Hongwu Zhang, Yong-Gang Zheng (2015). A multiplicative finite element algorithm for the inhomogeneous swelling of polymeric gels.DOI
126. Hui Li, Hongwu Zhang, Yong-Gang Zheng (2015). A coupling extended multiscale finite element method for dynamic analysis of heterogeneous saturated porous media.DOI
127. Jing-Kai Wu, Hongwu Zhang, Yong-Gang Zheng (2015). A Concurrent Multiscale Method for Simulation of Crack Propagation.DOI
128. 卢梦凯，郑勇刚，张洪武（2014）. 广义耦合扩展多尺度FEM及其在饱和多孔介质弹塑性固结分析中的应用. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会》.
129. 叶宏飞，张洪武，陈震，宗智，张忠强，郑勇刚（2014）. 含液碳纳米管的电控力学性能的分子动力学研究. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
130. 尹进，张盛，陈飙松，张洪武（2014）. 基于多重多级子结构声子能带与传输特性分析. 《力学学报》.
131. 刘银，张洪武（2014）. 单层及多层凝胶圆管的变形及应力分析. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
132. 赵磊，张昭，王松，张洪武（2014）. 不同工况下机车车体碰撞过程数值模拟. 《机械研究与应用》.
133. 牛聪民，欧阳华江，张洪武，林育兹（2014）. 电动桥式起重机负载升降过程的系统动力学模拟. 《计算力学学报》.
134. 陈玉震，张盛，陈飙松，张洪武（2014）. 基于开放式结构有限元系统SiPESC.FEMS的动力时程分析通用算法构架. 《计算力学学报》.
135. 陈玉震，张盛，陈飙松，卢梦凯，张洪武（2014）. 广义扩展多尺度有限元法在非均质材料结构非平稳随机响应分析中的应用. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
136. 张昭，吴奇，张洪武（2014）. 2024-T3铝合金搅拌摩擦焊接中搅拌头尺寸和搅拌针形状影响的数值模拟(英文). Transactions of Nonferrous Metals Society of China.
137. 吕军，刘辉，张洪武，高效伟（2014）. 仿生智能材料液固双相耦合几何非线性扩展多尺度有限元计算方法. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
138. 吴奇，张昭，张洪武（2014）. 搅拌摩擦焊接中焊接速度与搅拌头受力关系研究. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会》.
139. 张昭，吴奇，张洪武（2014）. 搅拌针对搅拌摩擦焊接搅拌区晶粒影响研究. 《兵器材料科学与工程》.
140. 赵磊，张昭，王松，张洪武（2014）. 燃油箱吊座的焊缝有限元强度和疲劳分析. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
141. 黄佳，尹进，张盛，陈飙松，张洪武（2014）. 珍珠层复合堆叠材料中弹性波传播特性研究. 《振动与冲击》.
142. 尹进，张盛，陈飙松，张洪武（2014）. 基于声子晶体的三维珍珠层隔振复合材料设计. 《中国计算力学大会2014暨第三届钱令希计算力学奖颁奖大会论文集》.
143. 孙运见，张盛，张洪武（2014）. 基于SiPESC平台的模态综合法研究及实现. 《固体力学学报》.
144. 李建宇，张洪武（2014）. 解Drucker-Prager塑性问题的二阶锥互补法. 《计算力学学报》.
145. Hongwu Zhang, Yin Liu, Sheng Zhang, J. Tao, Jun Wu, Biaosong Chen (2014). Extended multiscale finite element method: its basis and applications for mechanical analysis of heterogeneous materials.DOI
146. Wen-Zheng Zhang, Xue-Gang Yuan, Hongwu Zhang, Jiu-Sheng Ren (2014). Deformation analysis of an incompressible composite cylindrical tube subjected to end axial loads and internal constraint.DOI
147. Q. Duan, Xin Gao, Bing-Bing Wang, Xi-Kui Li, Hongwu Zhang (2014). A four-point integration scheme with quadratic exactness for three-dimensional element-free Galerkin method based on variationally consistent formulation.DOI
148. Yin Liu, Hongwu Zhang, Yong-Gang Zheng, Sheng Zhang, Biaosong Chen (2014). A nonlinear finite element model for the stress analysis of soft solids with a growing mass.DOI
149. Hongwu Zhang, Hui Liu (2014). A MULTISCALE COMPUTATIONAL METHOD FOR 2D ELASTOPLASTIC DYNAMIC ANALYSIS OF HETEROGENEOUS MATERIALS.DOI
150. Zheng-wei Zhang, Zhao Zhang, Hongwu Zhang (2014). Numerical investigations of size effects on residual states of friction stir weld.DOI
151. Hui Liu, Hongwu Zhang (2014). An efficient multiscale method for 2D dynamic analysis of the coupling system of fluid and heterogeneous structure.DOI
152. Hongwu Zhang, Yin Liu, Sheng Zhang, Biaosong Chen (2014). Multilevel Adaptive Algorithm for Multiscale Analysis of Heterogeneous Materials.DOI
153. Zhao-Dong Zhang, Qi Wu, Hongwu Zhang (2014). Numerical studies of effect of tool sizes and pin shapes on friction stir welding of AA2024-T3 alloy.DOI
154. J. Lv, Kai Yang, Hongwu Zhang, Dongsheng Yang, Yi Huang (2014). A hierarchical multiscale approach for predicting thermo-electro-mechanical behavior of heterogeneous piezoelectric smart materials.DOI
155. Q. Duan, Xin Gao, Bing-Bing Wang, Xi-Kui Li, Hongwu Zhang, T. Belytschko, Yu-Long Shao (2014). Consistent element‐free Galerkin method.DOI
156. Zhen Chen, J. Tao, Yong-Gang Zheng, Hongwu Zhang (2014). The Recent Development of the MPM for Multi-Physics Simulation.
157. Haijun Peng, Qiang Gao, Hongwu Zhang, Zhigang Wu, Wanxie Zhong (2014). Parametric variational solution of linear-quadratic optimal control problems with control inequality constraints. Applied Mathematics and Mechanics.DOI
158. 吕军，张洪武，陈飙松（2013）. 基于扩展多尺度有限元法的含液闭孔材料拓扑优化. 《固体力学学报》.
159. 刘银，张洪武，张盛，陈飙松，杨东生（2013）. 基于扩展多尺度有限元非均质材料的屈曲分析. 《固体力学学报》.
160. 刘辉，张洪武（2013）. 多节点扩展多尺度有限元法. 《固体力学学报》.
161. 张正伟，张昭，张洪武（2013）. 搅拌摩擦焊接残余应力及残余变形数值分析. 《计算力学学报》.
162. 黄佳，张昭，张洪武（2013）. 聚能射流形成数值模拟. 《计算力学学报》.
163. 杨东生，张盛，李云鹏，陈飙松，张洪武（2013）. 基于SiPESC平台的传热问题有限元分析系统. 《大连理工大学学报》.
164. 姚征，张洪武，钟万勰（2013）. 连续系统的界带分析方法. 《计算力学学报》.
165. 高强，彭海军，张洪武，钟万勰（2013）. 基于哈密顿动力系统新变分原理的保辛算法之一:变分原理和算法构造. 《计算力学学报》.
166. 高强，彭海军，张洪武，钟万勰（2013）. 基于哈密顿动力系统新变分原理的保辛算法之二:算法保辛性质证明. 《计算力学学报》.
167. 高强，彭海军，张洪武，钟万勰（2013）. 基于哈密顿动力系统新变分原理的保辛算法之三:数值算例. 《计算力学学报》.
168. 段庆林，李锡夔，张洪武（2013）. 无网格法的导数一致性及二阶一致积分方案. 《中国力学大会——2013论文摘要集》.
169. 郑勇刚，高菲，张洪武，卢梦凯（2013）. 饱和多孔介质大变形耦合动力接触分析的修正对流粒子域插值物质点方法. 《中国力学大会——2013论文摘要集》.
170. S. Zhang, Di-Xiong Yang, Hongwu Zhang, Yong-Gang Zheng (2013). Coupling extended multiscale finite element method for thermoelastic analysis of heterogeneous multiphase materials.DOI
171. Zhao-Qian Xie, Hongwu Zhang (2013). A NEW MULTISCALE FINITE ELEMENT METHOD FOR MECHANICAL ANALYSIS OF PERIODIC HETEROGENEOUS COSSERAT MATERIALS.DOI
172. Hongwu Zhang, Yong-Gang Zheng, Jing-Kai Wu, Hui Liu, Zhen-Dong Fu (2013). GENERALIZED FOUR-NODE PLANE RECTANGULAR AND QUADRILATERAL ELEMENTS AND THEIR APPLICATIONS IN THE MULTISCALE ANALYSIS OF HETEROGENEOUS STRUCTURES.DOI
173. Yong-Gang Zheng, Fei Gao, Hongwu Zhang, Meng-Kai Lu (2013). Improved convected particle domain interpolation method for coupled dynamic analysis of fully saturated porous media involving large deformation.DOI
174. Q. Duan, Xi-Kui Li, Hongwu Zhang (2013). Efficient Integration Schemes for Quadratic Meshfree Galerkin Methods.
175. 李建宇，张洪武（2012）. J 2 弹塑性分析的二阶锥互补法. 《力学与工程应用》.
176. 张洪武，张亮，高强（2012）. 拉压不同模量材料的参变量变分原理和有限元方法. 《工程力学》.
177. 张正伟，张昭，刘亚丽，张洪武，王晋宝，柳占宇，王松（2012）. 搅拌摩擦焊数值模拟过程中不同转速与热输入功率之间关系研究. 《焊接》.
178. 刘岩，关振群，张洪武（2012）. 任意多面体边界一致四面体网格生成方法. 《计算力学学报》.
179. 张洪武，高菲，郑勇刚，王鲲鹏（2012）. 饱和多孔介质动力学大变形分析耦合对流粒子域插值方法. 《应用力学学报》.
180. 姚征，张洪武，钟万勰（2012）. 时滞与界带. 《动力学与控制学报》.
181. 解兆谦，张洪武，陈飙松（2012）. 基于参变量变分原理的三维Cosserat体模型弹塑性分析与应变局部化模拟. 《工程力学》.
182. 刘岩，关振群，张洪武，张占群（2012）. 面向大规模科学计算的三维Delaunay快速插点算法. 《中国科学:物理学 力学 天文学》.
183. 赵巍，袁学刚，张洪武，任九生（2012）. 翻转后的不可压缩neo-Hookean圆柱管的有限变形. 《固体力学学报》.DOI
184. 刘亚丽，张昭，陈金涛，张洪武（2012）. 搅拌摩擦焊接数值模拟的网格敏感性分析. 《计算力学学报》.
185. Wen-Zheng Zhang, Xue-Gang Yuan, Hongwu Zhang (2012). Nonlinear Periodic Oscillation of a Cylindrical Microvoid Centered at an Isotropic Incompressible Ogden Cylinder. Journal of Applied Mathematics.DOI
186. Hongwu Zhang, J. Lv (2012). A multiscale method for the numerical analysis of active response characterization of 3D nastic structures.DOI
187. Q. Duan, Xi-Kui Li, Hongwu Zhang, Bing-Bing Wang, Xin Gao (2012). Quadratically consistent one-point (QC1) quadrature for meshfree Galerkin methods.DOI
188. Wen-Zheng Zhang, Xue-Gang Yuan, Hongwu Zhang, Jiu-Sheng Ren (2012). Finite Deformation of a Class of Rectangular Rubber Rings Subjected to end Axial Loads.DOI
189. Hongwu Zhang, Liang Zhang, Q. Gao (2012). THE PARAMETRIC VARIATIONAL PRINCIPLE AND FINITE ELEMENT METHOD FOR MATERIAL WITH DIFFERENT MODULUS IN TENSION AND COMPRESSION.
190. Q. Duan, Xi-Kui Li, Hongwu Zhang, T. Belytschko (2012). Second‐order accurate derivatives and integration schemes for meshfree methods.DOI
191. Hongwu Zhang, R. Santagiuliana, B. Schrefler (2012). Return mapping algorithm for an enhanced generalized plasticity constitutive model of partially saturated soils.DOI
192. Hongwu Zhang, Jing-Kai Wu, Yong-Gang Zheng (2012). An adaptive multiscale method for strain localization analysis of 2D periodic lattice truss materials.DOI
193. Hongwu Zhang, Liang Zhang, Q. Gao (2012). Numerical Method for Dynamic Analysis of Two-Dimensional Bimodular Structures.DOI
194. 袁学刚，张文正，张洪武，朱正佑（2011）. 不可压缩层合橡胶圆管径向膨胀的稳定性分析. 《应用数学和力学》.
195. 金玮玮，张昭，张洪武（2011）. 药型罩锥角对射孔枪射流冲击过程的影响. 《计算力学学报》.
196. 高强，姚伟岸，吴锋，张洪武，林家浩，钟万勰（2011）. 周期结构动力响应的高效数值方法. 《力学学报》.
197. 李宁，张洪武（2011）. 冠脉支架纵向柔顺性优化模型. 《计算力学学报》.
198. 秦建敏，张洪武（2011）. 颗粒材料内部滑动变形局部化的离散元模拟. 《计算力学学报》.
199. 彭海军，高强，张洪武，吴志刚，钟万勰（2011）. 输入受限LQ控制的参变量变分原理和算法. 《力学学报》.
200. 李宁，张洪武（2011）. 冠脉支架纵向柔顺性数值模拟. 《计算力学学报》.
201. 高强，吴锋，张洪武，林家浩，钟万勰（2011）. 大规模动力系统改进的快速精细积分方法. 《计算力学学报》.
202. 王磊，张洪武（2011）. 金属-碳管复合结构的计算力学研究. 《计算力学学报》.
203. 王晋宝，田美灵，张洪武，郭旭（2011）. 单壁碳纳米管的耦合行为研究. 《力学季刊》.
204. 张洪武，吴敬凯，付振东（2011）. 周期性点阵桁架材料力学性能分析的一种新的多尺度计算方法. 《固体力学学报》.
205. Xue-Gang Yuan, Wen-Zheng Zhang, Hongwu Zhang, Zheng-You Zhu (2011). Stability analysis of radial inflation of incompressible composite rubber tubes.DOI
206. Xue-Gang Yuan, Hongwu Zhang, Wen-Zheng Zhang, Wei Zhao, Bin Dong (2011). Dynamic cavitations in incompressible hyperelastic pre-strained circular sheets.DOI
207. Hongwu Zhang, L. Zhang, Q. Gao (2011). An efficient computational method for mechanical analysis of bimodular structures based on parametric variational principle.DOI
208. 秦建敏，张洪武（2010）. 颗粒材料的微观临界状态理论模型. 《岩土力学》.
209. 张洪武，王鲲鹏（2010）. 基于物质点方法饱和多孔介质动力学模拟(Ⅲ)——两相物质点方法. 《岩土工程学报》.
210. 高强，谭述君，张洪武，钟万勰（2010）. 基于对偶变量变分原理和混合变量的保辛方法. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）》.
211. 张昭，陈金涛，刘亚丽，张洪武（2010）. 不同材料的搅拌摩擦焊接数值模拟. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）》.
212. 张洪武，吴敬凯，刘辉，郑勇刚，付振东（2010）. 广义平面矩形与空间矩形块体单元. 《计算力学学报》.
213. 张洪武，刘辉，吴敬凯，郑勇刚（2010）. 平面4节点广义等参单元. 《计算力学学报》.
214. 张洪武，吕军（2010）. 感性材料与结构分析的基本模型. 《计算力学学报》.
215. 金玮玮，张昭，韩秀清，张洪武（2010）. 射孔枪射流形成的数值模拟与弹壳设计. 《塑性工程学报》.
216. 张洪武（2010）. 参变量变分原理与材料和结构力学分析.
217. 袁学刚，张洪武，任九生，朱正佑（2010）. 动载荷下不可压缩超弹性球形薄膜的若干定性性质. 《应用数学和力学》.
218. 卢梦凯，张洪武，郑勇刚（2010）. 饱和多孔介质接触分析的两相物质点法研究. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）论文集》.
219. 张盛，方杰，张洪武，陈飙松（2010）. 多重多级子结构动力特征值分析的Lanczos算法. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）论文集》.
220. 李建宇，张洪武，潘少华（2010）. 正交各向异性摩擦接触分析的一个二阶锥线性互补法. 《固体力学学报》.
221. 高强，谭述君，张洪武，林家浩，钟万勰（2010）. 基于对偶变量变分原理和两端位移独立变量的保辛方法. 《计算力学学报》.
222. 张洪武，吕军（2010）. 感性材料与结构分析的两尺度模型. 《计算力学学报》.
223. Hongwu Zhang, J. Wu, Zhen-Dong Fu (2010). Extended Multiscale Finite Element Method for Mechanical Analysis of Periodic Lattice Truss Materials.DOI
224. Xue-Gang Yuan, Hongwu Zhang, Jiu-Sheng Ren (2010). Dynamic Bifurcation in Composite Incompressible Hyperelastic Cylindrical Tubes.DOI
225. Xue-Gang Yuan, Hongwu Zhang, Jiu-Sheng Ren, Zheng-You Zhu (2010). Some qualitative properties of incompressible hyperelastic spherical membranes under dynamic loads.DOI
226. Xue-Gang Yuan, Hongwu Zhang (2010). Notice of RetractionEffects of constitutive parameters on radial inflation and oscillation of pre-stressed nonlinear elastic tubes. International Conference on Computer Engineering and Technology.DOI
227. Zhi-Qiang Feng, C. Renaud, J. Cros, Hongwu Zhang, Z. Guan (2010). A finite element finite-strain formulation for modeling colliding blocks of Gent materials.DOI
228. 李建宇，潘少华，张洪武（2009）. 解三维摩擦接触问题的一个二阶锥线性互补法. 《力学学报》.
229. 高强，谭述君，张洪武，钟万勰（2009）. 基于对偶变量变分原理和两端动量独立变量的保辛方法. 《动力学与控制学报》.
230. 袁学刚，张洪武（2009）. 不可压缩超弹性球形薄膜径向振动的可控性. 《第十二届全国非线性振动暨第九届全国非线性动力学和运动稳定性学术会议论文集》.
231. 王晋宝，田美灵，谢永和，张洪武，郭旭（2009）. 单壁碳纳米管的扭转力学特性研究. 《计算力学学报》.
232. 张昭，刘亚丽，张洪武（2009）. 搅拌摩擦焊接接头残余应力分布及搅拌头受力分析. 《中国力学学会学术大会'2009论文摘要集》.
233. 张盛，张洪武，毕金英，陈飚松（2009）. 多维非经典热传导问题的时间-空间多尺度高阶均匀化分析. 《复合材料学报》.
234. Hongwu Zhang, Kun-Peng Wang, Zhen Chen（2009）. 物質粒子法に基づく飽和多孔質媒体の動力学シミュレーション(II)--/飽和多孔媒体と固体間の動的接触解析【JST・京大機械翻訳】.
235. Zhao-Dong Zhang, Jun Bie, Ya-Li Liu, Hongwu Zhang (2009). Effect of Traverse/Rotational Speed on Material Deformations and Temperature Distributions in Friction Stir Welding.
236. Hongwu Zhang, Kun-Peng Wang, Zhen Chen (2009). Material point method for dynamic analysis of saturated porous media (III): two-phase material point method.
237. Hongwu Zhang, Zhao Zhang (2009). Numerical Modeling of Friction Stir Welding Process by Using Rate-dependent Constitutive Model.
238. Hongwu Zhang, Kai Wang, Zhen Chen (2009). Material point method for dynamic analysis of saturated porous media under external contact/impact of solid bodies.DOI
239. Zhao-Dong Zhang, Hongwu Zhang (2009). Numerical studies on controlling of process parameters in friction stir welding.DOI
240. Hongwu Zhang, Kun-Peng Wang, Zhen Chen（2009）. 基于物质点方法饱和多孔介质动力学模拟（I）——耦合物质点方法.
241. Hongwu Zhang, Kun-Peng Wang, Zhen Chen（2009）. 基于物质点方法饱和多孔介质动力学模拟（II）——饱和多孔介质与固体间动力接触分析.
242. Qiang Zhou, Hayley H. Shen, Brian T. Helenbrook, Hongwu Zhang (2009). Scale dependence of direct shear tests. 《中国科学通报：英文版》.DOI
243. 戴磊，康健，陈飙松，关振群，张洪武（2008）. 基于CAD平台的周期性材料单胞的参数化形状优化设计方法. 《计算力学学报》.
244. 蔡坤，陈飙松，张洪武（2008）. 具有不同拉压性能材料的连续体结构拓扑优化. 《力学学报》.
245. 姚征，张洪武，王晋宝，钟万勰（2008）. 基于界带模型的碳纳米管声子谱的辛分析. 《固体力学学报》.
246. 蔡坤，陈飙松，张洪武（2008）. 具有体积约束的连续体结构拓扑优化仿生方法. 《固体力学学报》.
247. 张昭，张洪武（2008）. 率相关材料在搅拌摩擦焊接过程中的行为分析. 《材料科学与工艺》.
248. 张昭，张洪武（2008）. 接触模型对搅拌摩擦焊接数值模拟的影响. 《金属学报》.
249. 连志强，周定国，张洪武（2008）. 人体膝关节平地行走时的动力学模拟. 《中国生物医学工程学报》.
250. 张昭，刘亚丽，胡海飞，亢战，韩秀清，李晓杰，张洪武（2008）. 射孔枪射孔过程数值模拟及参数控制. 《塑性工程学报》.
251. 蔡坤，张洪武，罗阳军，陈飙松（2008）. 基于Wolff法则的连续体拓扑优化方法及其在生物力学中的应用. 《生物医学工程学杂志》.
252. 连志强，赵德伟，张洪武，王卫民（2008）. 股骨头缺血性坏死骨瓣移植过程的有限元模拟. 《生物医学工程学杂志》.
253. 蔡坤，张洪武，周强，陈飙松（2008）. 几何非线性连续体结构拓扑优化仿生方法. 《大连理工大学学报》.
254. 亢战，张洪武（2008）. 挤压成形过程灵敏度分析及模具型腔参数优化设计. 《工程力学》.
255. Hongwu Zhang, Z. Zhang, J.-T. Chen (2008). Corrigendum to “3D modeling of material flow in friction stir welding under different process parameters” [J. Mater. Process. Technol. 183 (2007) 62–70].DOI
256. Hongwu Zhang, Ai-Hua Liao, Chang-Hua Wu (2008). Elastoplastic frictional contact problem study on interference fits of compressor.DOI
257. Hongwu Zhang (2008). EFFECT OF CONTACT MODEL ON NUMERICAL SIMULATION OF FRICTION STIR WELDING.
258. Kun Cai, Biaosong Chen, Hongwu Zhang, Jiao Shi (2008). Stiffness Design of Continuum Structures by a Bionics Topology Optimization Method.DOI
259. 张昭，张洪武 (2008). Simulation of 3D material flow in friction stir welding of AA6061-T6. China Welding.
260. Ling-Xi Qian, Hongwu Zhang (2008). An improved Non-reflecting Boundary Method for Soil-Structure Interaction Analysis.DOI
261. 张昭，张洪武（2007）. 焊接参数对搅拌摩擦焊搅拌区材料融合的影响. 《金属学报》.
262. 王宇新，陈震，张洪武，孙明（2007）. 多层抗爆结构冲击响应无网格MPM法分析. 《工程力学》.
263. 张洪武，王辉（2007）. 基于参数变分原理的含夹杂Voronoi单元法及非均质材料弹塑性计算. 《复合材料学报》.
264. 王辉，张洪武（2007）. 基于参变量变分原理的非均质多边形微结构材料弹塑性分析. 《应用力学学报》.
265. 蔡坤，张洪武，罗阳军，陈飚松（2007）. 基于Wolff法则连续体拓扑优化方法中的参数分析. 《应用力学学报》.
266. 张忠强，张洪武（2007）. 液体水银在碳纳米管中的浸润及传输现象研究. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（下）》.
267. 关振群，单菊林，张洪武（2007）. 有限元网格生成系统的基本框架. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（下）》.
268. 李云鹏，陈飙松，张洪武（2007）. 面向大规模计算的新型工程数据库. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（下）》.
269. 张昭，刘亚丽，张洪武（2007）. 搅拌摩擦焊接中缺陷生成的数值模拟. 《庆祝中国力学学会成立50周年暨中国力学学会学术大会’2007论文摘要集（下）》.
270. 张昭，刘亚丽，张洪武（2007）. 轴向载荷变化对搅拌摩擦焊接过程中材料变形和温度分布的影响. 《金属学报》.
271. 张洪武，王辉，陈飚松，解兆谦（2007）. 基于参数变分原理的Cosserat连续体弹塑性分析. 《固体力学学报》.
272. 张洪武，余志兵，王鲲鹏（2007）. 复合材料弹塑性多尺度分析模型与算法. 《固体力学学报》.
273. 张洪武，廖爱华，吴昌华（2007）. 压气机过盈配合的弹塑性有摩擦接触的研究. 《工程力学》.
274. 蔡坤，张洪武，罗阳军，陈飙松（2007）. 三维连续体结构仿生拓扑优化新方法. 《工程力学》.
275. 陈刚，潘一山，张洪武（2007）. 材料的率相关与梯度二、四阶耦合模型的内尺度律与稳定性研究. 《计算力学学报》.
276. 王剑，赵国忠，张洪武（2007）. 压电曲壳结构形状控制和优化设计. 《力学学报》.
277. Kun Cai, Biaosong Chen, Hongwu Zhang (2007). Topology Optimization of Continuum Structures Based on a New Bionics Method.DOI
278. Hongwu Zhang, S. Zhang, Jin-Ying Bi, B. Schrefler (2007). Thermo‐mechanical analysis of periodic multiphase materials by a multiscale asymptotic homogenization approach.DOI
279. Hongwu Zhang, Hui Wang, Biaosong Chen, Zhao-Qian Xie (2007). Parametric variational principle based elastic-plastic analysis of Cosserat continuum.DOI
280. Hongwu Zhang, Zhao-Dong Zhang, J.-T. Chen (2007). 3D modeling of material flow in friction stir welding under different process parameters.DOI
281. Zhao Zhang, Hongwu Zhang (2007). The simulation of residual stresses in friction stir welds. Journal of mechanics of materials and structures.DOI
282. Hongwu Zhang, K.-P. L. Wang, Zhenyu Zhang (2007). Material Point Method for Numerical Simulation of Failure Phenomena in Multiphase Porous Media.DOI
283. 蔡坤，张洪武，陈飙松（2006）. 基于Wolff法则的连续体结构拓扑优化方法. 《力学学报》.
284. 张昭，张洪武（2006）. 搅拌摩擦焊接中材料变形及残余应力分析. 《兵器材料科学与工程》.
285. 张昭，张洪武（2006）. 焊接参数对搅拌摩擦焊接质量的影响. 《材料研究学报》.
286. 张洪武，姚征，钟万勰（2006）. 界带分析的基本理论和计算方法. 《计算力学学报》.
287. 周雷，张洪武（2006）. 饱和多孔介质动力分析的数值流形单元. 《工程力学》.
288. 廖爱华，张洪武，吴昌华（2006）. 压气机套装叶轮的三维接触非线性有限元分析. 《内燃机工程》.
289. 张昭，张洪武（2006）. 搅拌摩擦焊中动态再结晶及硬度分布的数值模拟. 《金属学报》.
290. 张洪武，王辉（2006）. 基于参数变分原理的非均质材料弹塑性有限元分析的Voronoi单元法. 《应用数学和力学》.
291. 张洪武，张昭，陈金涛（2006）. 平移速度的变化对搅拌焊接材料流动的影响. 《航空学报》.
292. 张洪武，张盛，毕金英（2006）. 周期性结构热动力时间-空间多尺度分析. 《力学学报》.
293. B. Schrefler, Hongwu Zhang, L. Sanavia (2006). Interaction between different internal length scales in strain localization analysis of fully and partially saturated porous media—the 1‐D case.DOI
294. Hongwu Zhang, L. Zhou (2006). Numerical manifold method for dynamic nonlinear analysis of saturated porous media.DOI
295. Hongwu Zhang, Zhao-Dong Zhang, Jun Bie, Lei Zhou, Jin-Tao Chen (2006). Effect of viscosity on material behavior in friction stir welding process.DOI
296. Hongwu Zhang (2006). EFFECT OF PROCESS PARAMETERS ON MATERIAL FLOW AND RESIDUAL STRESS IN FRICTION STIR WELDING.DOI
297. 张洪武，张昭，陈金涛（2005）. 搅拌摩擦焊接过程中搅拌头转速对材料流动的影响. 《金属学报》.
298. 张洪武（2005）. 含液多相多孔介质的稳定性问题与失效破坏分析. 《中国力学学会学术大会'2005论文摘要集（上）》.
299. 钟万勰，姚征，张洪武（2005）. 界带分析. 《中国力学学会学术大会'2005论文摘要集（上）》.
300. 张洪武，付振东（2005）. 考虑辐射效应的多孔材料传热有限元算法. 《航空动力学报》.
301. 张洪武，韩炜，陈金涛（2005）. 电磁接触问题的变分原理与有限元求解. 《应用力学学报》.
302. Hongwu Zhang, Hui Wang, P. Wriggers, B. Schrefler (2005). A finite element model for contact analysis of multiple Cosserat bodies.DOI
303. Hongwu Zhang, Zhao-Dong Zhang, J.-T. Chen (2005). The finite element simulation of the friction stir welding process.DOI
304. Su-Yan He, Hongwu Zhang, Xing-Si Li (2005). Solving frictional contact problems by two aggregate-function-based algorithms.DOI
305. Hongwu Zhang, Hui Wang, Guo-Zhen Liu (2005). Quadrilateral isoparametric finite elements for plane elastic Cosserat bodies.DOI
306. Hongwu Zhang (2005). 4-And 8-node isoparametric elements for finite element analysis of plane cosserat bodies.
307. Hongwu Zhang, Sylvia Y. He, Xin Li (2005). Two aggregate-function-based algorithms for analysis of 3D frictional contact by linear complementarity problem formulation.DOI
308. Hongwu Zhang, J. Qin (2005). Basic theories for strain localization analysis of porous media with rate dependent model. Science Bulletin.DOI
309. 李兴斯，何素艳，潘少华，张洪武（2004）. 基于代数等价变换的线性互补问题内点算法. 《大连理工大学学报》.
310. 张洪武，王鲲鹏（2004）. 材料非线性微-宏观分析的多尺度方法研究. 《力学学报》.
311. 张洪武，何素艳，李兴斯（2004）. 正交各向异性弹塑性摩擦接触问题的数值求解. 《固体力学学报》.
312. 张洪武，张盛，郭旭，毕金英（2004）. 周期性材料非经典热传导时空间多尺度分析方法. 《复合材料学报》.
313. 张洪武，何素艳，李兴斯（2004）. 求解摩擦接触问题的一个非内点光滑化算法. 《应用数学和力学》.
314. 张洪武（2004）. 有限元分析与CAE技术基础. 《清华大学出版社》.
315. Hongwu Zhang, B. Schrefler (2004). Particular aspects of internal length scales in strain localization analysis of multiphase porous materials.DOI
316. 张洪武，顾元宪，关振群，亢战，李云鹏，赵国忠（2003）. 用于有限元分析与优化设计的JIFEX软件. 《计算机集成制造系统》.
317. 张洪武，黄辉，周雷（2003）. 热耦合作用下非饱和土动力非线性有限元分析. 《全国岩土与工程学术大会论文集（上册）》.
318. 张洪武，王鲲鹏（2003）. 弹塑性复合材料多尺度计算的模型与算法研究. 《复合材料学报》.
319. 张洪武，汪敏，郭旭（2003）. 空间柔性网—膜结构分析的数学规划算法. 《航空学报》.
320. 张洪武（2003）. 应变局部化分析中两类不同材料模型的讨论. 《力学学报》.
321. Hongwu Zhang, W. Zhong (2003). Hamiltonian principle based stress singularity analysis near crack corners of multi-material junctions.DOI
322. Hongwu Zhang, Xin-Wei Zhang, Jiun-Shyan Chen (2003). A new algorithm for numerical solution of dynamic elastic–plastic hardening and softening problems.DOI
323. Hongwu Zhang, D. Boso, B. Schrefler (2003). Homogeneous Analysis of Periodic Assemblies of Elastoplastic Disks in Contact.DOI
324. 张洪武（2002）. 非饱和多孔介质非线性有限元分析的一致性算法. 《力学季刊》.DOI
325. 张洪武（2002）. 非饱和多孔介质有限元分析的基本控制方程与变分原理. 《力学季刊》.
326. 钟万勰，张洪武（2002）. 二次规划的混合能方法及杆系结构弹塑性分析. 《固体力学学报》.
327. 李锡夔，张俊波，张洪武（2002）. 含液体非弹性多孔介质中波传播过程的失稳与逸散性. 《应用数学和力学》.
328. Hongwu Zhang, Weili Xu, S. Di, P. Thomson (2002). Quadratic programming method in numerical simulation of metal forming process.DOI
329. Xi-Kui Li, Jun-Bo Zhang, Hongwu Zhang (2002). Instability of wave propagation in saturated poroelastoplastic media.DOI
330. 张洪武（2001）. 非饱和多孔介质动力应变局部化数值模拟. 《第十届全国结构工程学术会议论文集第Ⅱ卷》.
331. 张洪武（2001）. 弹性接触颗粒状周期性结构材料力学分析的均匀化方法(Ⅱ)——宏观均匀化分析. 《复合材料学报》.
332. 张洪武，钟万勰，顾元宪（2001）. 三维弹塑性有摩擦接触问题求解的一个新算法. 《应用数学和力学》.
333. 张洪武，张新伟（2001）. 基于参数二次规划与精细积分方法的动力弹塑性问题分析. 《工程力学》.
334. Hongwu Zhang, B. Schrefler (2001). Uniqueness and localization analysis of elastic-plastic saturated porous media.DOI
335. Hongwu Zhang, Yuanxian Gu, W.-X. Zhong (2001). A Note for Analysis of Thermo-Mechanical Contact Problems with Initial GAP.DOI
336. Hongwu Zhang, O. Heeres, R. de Borst, B. Schrefler (2001). Implicit integration of a generalized plasticity constitutive model for partially saturated soil.DOI
337. 陈飚松，顾元宪，张洪武（2000）. 瞬态温度场灵敏度分析的精细积分法. 《“力学2000”学术大会》.
338. 顾元宪，陈飚松，张洪武，关振群（2000）. 非线性瞬态热传导的精细积分方法. 《大连理工大学学报》.
339. 张洪武，钟万勰（2000）. 弹塑性问题参数二次规划分析的隐式算法. 《应用力学学报》.
340. 顾元宪，陈飚松，张洪武（2000）. 结构动力方程的增维精细积分法. 《力学学报》.
341. 张洪武（2000）. 饱和多孔介质分析解的唯一性与应变局部化分岔. 《力学学报》.
342. 张洪武（2000）. 渗流作用下饱和多孔材料应变局部化有限元分析研究工作的现状与若干进展. 《“力学2000”学术大会》.
343. 张洪武，顾元宪（2000）. 机械结构设计接触非线性耦合分析与有限元分析软件系统JIFEX-CONT. 《西部大开发 科教先行与可持续发展——中国科协2000年学术年会文集》.
344. 张洪武，顾元宪，钟万勰（2000）. 传热与接触两类问题耦合作用的有限元分析. 《固体力学学报》.
345. 张洪武，钟万勰（2000）. 矩阵指数计算算法讨论. 《大连理工大学学报》.
346. 徐新生，郑新广，张洪武，钟万勰（1999）. 哈密顿体系与弹性楔体问题. 《应用力学学报》.
347. 顾元宪，亢战，张洪武（1999）. 结构动态特性响应优化设计的数值方法. 《中国力学学会青年工作委员会第三届学术年会》.
348. B. Schrefler, Hongwu Zhang, U. Galvanetto (1999). Global behavior of periodic assemblies of elastic contact bodies. Other Conferences.DOI
349. 张洪武，张鹏，钟万勰（1998）. 获得热传导问题“拟解析解”的精细积分算法. 《力学与实践》.
350. 张洪武（1998）. 多孔介质动力应变局部化分析的梯度塑性模型. 《大连理工大学学报》.
351. B. Schrefler, Hongwu Zhang, M. Pastor, O. Zienkiewicz (1998). Strain localisation modelling in saturated sand samples based on a generalised plasticity constitutive modeL.
352. 徐新生，张洪武，齐朝晖，钟万勰（1997）. 关于弹性回转体问题的直接方法. 《大连理工大学学报》.
353. Xin-Sheng Xu, W. Zhong, Hongwu Zhang (1997). The Saint-Venant problem and principle in elasticity.DOI
354. 张洪武，徐新生，李云鹏，钟万勰（1996）. 多种材料楔形结合点的奇性分析. 《大连理工大学学报》.
355. 张洪武，钟万勰（1996）. 从规划法求解看有摩擦接触解的不唯一性. 《应用力学学报》.
356. 张洪武（1995）. 规划法在接触分析中的无意义射线解. 《大连理工大学学报》.
357. 钱令希，钟万勰，张洪武（1993）. 以二相饱和介质为模型的地基与结构相互作用的动力有限元分析. 《海洋工程》.DOI
358. 张洪武，钟万勰，钱令希（1993）. 饱和土壤固结分析的算法研究. 《力学与实践》.
359. 钱令希，钟万勰，张洪武（1993）. 饱和土壤固结非线性有限元分析. 《大连理工大学学报》.
360. 张洪武，钟万勰，钱令希（1993）. 以u-U形式方程为基础的结构—饱和土壤相互作用的固结有限元分析. 《应用力学学报》.
361. 张洪武，钟万勰，钱令希（1992）. 基于μ-U方程的饱和土壤固结分析. 《大连理工大学学报》.
362. 张洪武，顾元宪，蒋诤（1992）. 抛物面天线有限元分析中风荷的自动计算方法. 《电子机械工程》.
363. 张洪武，何扬，张昌权（1992）. 空中爆炸冲击波地面荷载的数值模拟. 《爆炸与冲击》.
364. 张洪武，钟万勰，钱令希（1992）. 结构—饱和土壤相互作用的固结有限元分析. 《应用数学和力学》.
365. 张洪武，何扬，李锡夔（1991）. 改进的广义Smith非反射边界法. 《大连理工大学学报》.
366. 李锡夔，张洪武（1990）. 饱和土壤动力渗流的非线性分析. 《大连理工大学学报》.