明平文｜同济大学｜学者主页

2026

张子聪，郑俊生，姚东梅，孟晓敏，李成欣，明平文

《材料工程》

2025

质子交换膜燃料电池氢气渗透研究进展及抑制措施概述

陆继轩，郑伟波，李翔，王倩倩，李冰，明平文

《汽车工程》

DOI

2025

蓝弋林，杨代军，楚天阔，明平文，李冰，汪殿龙

《工程热物理学报》

2022

氢燃料电池列车研究进展

冯聪，罗聪，明平文，张存满

《内燃机与配件》

2022

袁林，王倩倩，唐富民，李冰，明平文，张存满

《同济大学学报(自然科学版)》

2021

Hao Yuan, Hai-Feng Dai, Xue-Zhe Wei, Pingwen Ming

DOI

2021

Improvement of Corrosion Resistance and Electrical Conductivity of Stainless Steel 316L Bipolar Plate by Pickling and Passivation

Y. Leng, Dai-Jun Yang, Pingwen Ming, Bing Li, Cun-Man Zhang

World Electric Vehicle Journal

DOI

2021

A novel approach based on semi-empirical model for degradation prediction of fuel cells

Mingyang Ou, Ruo-Fan Zhang, Zhifang Shao, Bing Li, Dai-Jun Yang, Pingwen Ming, Cun-Man Zhang

DOI

2021

Research progress of heat transfer inside proton exchange membrane fuel cells

Qian-Qian Wang, Bing Li, Dai-Jun Yang, Hai-Feng Dai, Jim P. Zheng, Pingwen Ming, Cun-Man Zhang

DOI

2021

Graph theory model and mechanism analysis of carbon fiber paper conductivity in fuel cell based on physical structure

Ruo-Fan Zhang, Bo-Wen Yang, Zhifang Shao, Dai-Jun Yang, Pingwen Ming, Bing Li, Hao Ji, Cun-Man Zhang

DOI

2021

Study on the thermal transient of cathode catalyst layer in proton exchange membrane fuel cell under dynamic loading with a two-dimensional model

Qian-Qian Wang, Fumin Tang, Bing Li, Hai-feng Dai, Jim P. Zheng, Cun-Man Zhang, Pingwen Ming

Chemical Engineering Journal

DOI

2021

Yuqing Guo, Dao-Zeng Yang, Bing Li, Dai-Jun Yang, Pingwen Ming, Cun-Man Zhang

ACS Applied Materials and Interfaces

DOI

2021

Control of Cluster Structures in Catalyst Inks by a Dispersion Medium

Dao-Zeng Yang, Shaomin Zhu, Yuqing Guo, Haifeng Tang, Dai-Jun Yang, Cun-Man Zhang, Pingwen Ming, Bing Li

ACS Omega

DOI

2021

Controlling the microscopic morphology and permeability of catalyst layers in proton exchange membrane fuel cells by adjusting catalyst ink agglomerates

Bing Li, Yang Liu, Yuqing Guo, Dao-Zeng Yang, Dai-Jun Yang, Pingwen Ming, Cun-Man Zhang

DOI

2021

Tian-Kuo Chu, Ruo-Fan Zhang, Yanbo Wang, Mingyang Ou, Meng-Ran Xie, Han Shao, Dai-Jun Yang, Bing Li, Pingwen Ming, Cun-Man Zhang

DOI

2020

Highly active and durable carbon support Pt-rare earth catalyst for proton exchange membrane fuel cell

Tian-Kuo Chu, Meng-Ran Xie, Dai-Jun Yang, Pingwen Ming, Bing Li, Cun-Man Zhang

DOI

2020

The synergetic effect of air pollutants and metal ions on performance of a 5 kW proton‐exchange membrane fuel cell stack

Meng-Ran Xie, Qing Zhang, Dai-Jun Yang, Tian-Kuo Chu, Bing Li, Pingwen Ming, Cun-Man Zhang

International Journal of Energy Research

DOI

2020

Model-based observers for internal states estimation and control of proton exchange membrane fuel cell system: A review

Hao Yuan, Hai-Feng Dai, Xue-Zhe Wei, Pingwen Ming

DOI

2020

Yun-Feng Fu, Zhong-Jun Hou, Bo Wu, Pingwen Ming

2012

Metal bipolar plate inspection jack structure

Yun-Feng Fu, Nai-Tao Xu, Zhong-Jun Hou, Chao Liu, Pingwen Ming, Dan-Ru Li, Chang-Fu Liu

2011

轿车用燃料电池发动机示范应用稳定性

侯中军，江洪春，王仁芳，胡军，马由奇，王克勇，燕希强，戚朋，明平文

《吉林大学学报(工学版)》

2011

Preparation and characterization of a modified montmorillonite/sulfonated polyphenylether sulfone/PTFE composite membrane

D. Xing, G. He, Zhong-Jun Hou, Pingwen Ming, Shu-Fan Song

DOI

2010

乙烯基酯树脂/膨胀石墨燃料电池复合双极板

杜超，明平文，侯明，傅杰，邵志刚，衣宝廉

《电源技术》

2010

Temperature control system for proton exchange membrane fuel cell testing platform

Zhong-Jun Hou, Jing-Hua Dan, Xin-Nian Sun, Pingwen Ming, Xi-Qiang Yan

2010

A method for the uniform production of a membrane electrode catalyst coated membrane for a fuel cell

Zhong-Jun Hou, Pingwen Ming, Shu-Fan Song, D. Xing, Yuhai Zhang, Keyi Zhang

2010

Zhong-Jun Hou, Chang-Fu Liu, De-Yao Sun, Pingwen Ming, Jia-Liang Li, Ke-Yong Wang, Quan-Yong Gao

2010

Proton exchange membrane fuel cell bipolar plate with gas flow field

Yun-Feng Fu, Zhong-Jun Hou, Chang-Fu Liu, Hong-Liang Wu, Pingwen Ming

2010

Yu-Yu Jiang, Pingwen Ming, Ye-Fa Lin, Bao-Lian Yi

2006

Procede pour selectionner des etats de fonctionnement sans humidification d'une pile a combustible a membrane echangeuse de protons

H. Yu, Pingwen Ming, B. Yi

2006

Method for recovering proton exchange film fuel battery performance envenomed by sulfureted hydrogen

Pingwen Ming, F. Jing, Wei-Yu Shi, Bao-Lian Yi

2006

Xiao-Kuan Luo, M. Hou, Hai-Feng Zhang, Xi-Qiang Yan, Pingwen Ming, B. Yi

2006

A method for determining proton exchange film fuel cell film electrode platinum loading

Hong-Mei Yu, Pingwen Ming, F. Jing

2006

张华民，明平文，邢丹敏

《当代化工》

Post-mortem analysis of degradation behavior in catalyst layers of proton exchange membrane fuel cell under near-water boiling temperature

Dai-Jun Yang, Bo Zhou, Yirui Lu, Jiaming Lou, Bing Li, Pingwen Ming

Fuel

DOI

精选作品

期刊论文

质子交换膜燃料电池阴极气体扩散层高温服役衰减机理分析

Ionomer Adsorption Governs Coverage Structure: Interfacial Engineering of Fuel Cell Electrodes Toward High-Efficiency Proton/Oxygen Transport

Long-term sealing technology for proton exchange membrane fuel cells: Challenges and prospects in materials, structures and processes

Uniform construction of fuel cell electrodes at the hundred-nanometer scale via entropy–enthalpy synergy and shear forces

Study on a quantitative characterization method for reversible degradation during fuel cell operation

Nanosecond laser-fabricated surface microstructures for enhanced phase-change heat transfer in PEMFCs operated at elevated temperature

Cracking in PEMFC electrodes with highly graphitized carbon supports: Effects of solvent and dispersion process

Correlating gas diffusion layer properties, mass transport, and performance in proton exchange membrane fuel cells at the near-boiling temperature

Advanced carbon supports for elevated-temperature PEMFCs: Multiscale thermal transport, graphitization strategies, and interfacial engineering

Integrated mass-charge transfer enhancement in PEMFCs via nonspecific Pt-sulfonate adsorption and surface-channel co-design

Quantitative decoupling of electro-thermal degradation in PEMFCs: H₂ crossover through a single Sub-10 μm pinhole under asymmetric pressure

Short-term multi-step temperature prediction for automotive fuel cells via focus-time calibration model

Enhancing Hydration Stability and Proton Transport in Nafion/SiO2 Membranes for Medium- to High-Temperature PEMFCs

Decoupling of component function and LQR-based coordination control algorithm for air supply system of proton exchange membrane multi-stack fuel cell

Role of thermally grown oxide film on corrosion behavior of amorphous carbon-coated titanium bipolar plates under high potential and varying fluoride ion concentrations

Revealing the Trade-Off between Catalytic Activity and Mass Transport in Fuel Cells: Perspectives from Solvent and Ionomer Coverage State.

Post-mortem analysis of the degradation behavior of the fuel cell gas diffusion layer under near to water boiling point conditions

High water content reduces oxygen transport resistance via ionomer film restructuring at medium-high voltages

A Reinforcement Learning and Unsupervised Clustering-Based Method for Automated Driving Cycle Construction for Fuel Cell Light-Duty Trucks

Decoding spatiotemporal signatures of membrane drying in PEM fuel cell via distributed sensing and attentive deep learning

Differential degradation between cathode and anode catalyst layers in proton exchange membrane fuel cell under long-term heavy-duty conditions

Diffusion models enable high-fidelity prediction of fuel cell impedance spectrum from short time-domain profiles

Development of a bi-layer microporous layer for proton exchange membrane fuel cell under ultra-low hydrogen pressure

Online energy management strategy for fuel cell hybrid powertrain based on multi-objective constraint rules embedded in soft actor-critic learning

Failure mechanisms and mitigation strategies of proton exchange membrane fuel cells sealing system from multi-field coupling perspective

High-performance fuel cells enabled by nanocage SOPS filled cathode with enhanced Pt utilization and mass transport

Correlation Between Bubble Coverage and Current Density Distribution in a Proton Exchange Membrane Water Electrolyzer

The Dependence of Dispersed State of Fuel Cell Catalyst Ink on Shear Intensity and Temperature

Influence of magnetic agglomeration and multiphase composition on fuel cell PtCo3 alloy catalyst

Spatially heterogeneous degradation behaviors and mechanisms of catalyst layers in large-scale PEMFC stacks under dynamic operating conditions

Spatially heterogeneous degradation of gas diffusion layers in a full-size PEMFC stack during elevated-temperature dynamic operation

Techno-economic design and multi-objective optimization of an ammonia-fueled hybrid commercial vehicle with waste heat-driven onboard hydrogen production

Ex-situ study of gas diffusion layer degradation mechanisms in proton exchange membrane fuel cells under mid-temperature mixed-acid conditions

Dynamic modeling of an automotive PEMFC membrane humidifier with finite-rate sorption/desorption kinetics

Influence of gradient contact angle design in gas channels on the drainage performance of proton exchange membrane fuel cells

Model‐Based Sensitivity Analysis and Design of Coordination Control Algorithm for Air Supply Subsystem of a 140 kW Proton Exchange Membrane Fuel Cell Stack With Experimental Validation

Degradation Mechanism of the Membrane Electrode Assembly Catalyst Layer in Proton Exchange Membrane Fuel Cells under High-Temperature Accelerated Stress

Effects of Mold Deformation and Heat Transfer on the Consistency of Composite Bipolar Plates

Numerical and experimental investigation of anisotropic mass transfer properties in gas diffusion layers of proton exchange membrane fuel cells under assembly pressure

Thickness Reduction Strategy for Graphite Composite Bipolar Plates: Materials, Structure, and Manufacturing Process

Advances in Performance Degradation Mechanisms and Improvement Measures of Perfluorosulfonic Acid Ionomers in Catalyst Layers of Proton Exchange Membrane Fuel Cells Under Moderate‐Temperature and Low Relative Humidity Operation: A Review

石墨复合双极板辊压预成型工艺

质子交换膜燃料电池氢气渗透研究进展及抑制措施概述

复合双极板的接触角调控及性能优化

催化层/微孔层界面设计对PEMFC影响研究

Enhancing corrosion resistance of heat-assisted forming titanium bipolar plate for proton exchange membrane fuel cell through optimized heat treatment

The three-phase transport polarization and structural design status of PEM electrolyzer electrodes

Inhomogeneous degradation mechanism of proton exchange membrane fuel cell stack based on inter-cell and intra-cell cases

Microstructural changes and proton transport behavior of perfluorosulfonic acid membranes for medium-to-high temperature fuel cells

Degradation behavior of ionomer in the cathode catalyst layer of polymer electrolyte fuel cells

Application and localized corrosion of ruthenium oxide-coated titanium anode plates for a 10 kW fuel cell stack under dynamic load cycling

Dynamic thermal and mass transport in PEM fuel cells at elevated temperatures and pressures: A 3D model study

The coupled influence of multiple conditions on the performance and stability characteristics of PEMFCs

Formation mechanism and morphology control of cracks in PEMFC catalyst layer during fabrication process: A review.

Unveiling stack-level performance heterogeneity in proton exchange membrane fuel cells under elevated temperature and pressure conditions

A comprehensive review of cold start in proton-exchange membrane fuel cells: Challenges, strategies, and prospects

Mechanism Analysis and Optimization Strategies for the Performance of Composite Bipolar Plates in Proton Exchange Membrane Fuel Cells

High-performance of ultra-low Pt-loaded PEMFCs: carbon-encapsulated CoFe alloy supported Pt nanoparticles as high-efficiency electrocatalysts

Ionomer film morphology and multiphase transport on the L10-ordered PtCo nanoparticles surface

Constructing PtCo2.7M0.3 intermetallic compounds for enhanced oxygen reduction Electrocatalysis by synergizing doping and annealing

Catalytic curing-driven ultrafast fabrication of high-density composite bipolar plates for PEMFCs

Gradient degradation of ionomer along proton transport path in proton exchange membrane fuel cell catalyst layers: Mechanistic insights from 5000 h NEDC testing

Dynamic Control of Stack Temperature Prevents Abnormal Flooding in 60kW PEM Fuel Cells: Modeling and 2000h Road Validation

Investigation of the Structural Characteristics of the Gas Diffusion Layer Using Micro-X-Ray Computed Tomography

Effects of pore microstructure on water transport properties in gas diffusion layers of proton exchange membrane fuel cells

A Detailed Study of Deformation on Corrosion Behaviour of Stamped Stainless Steel Bipolar Plate Substrate for Proton Exchange Membrane Fuel Cell

Challenges in membrane electrode assemblies at elevated temperatures for proton exchange membrane fuel cells: A review

Degradation mechanism and prediction method development of the "collapse point" in proton exchange membrane fuel cell

The Solvent Effect on Ionomer Self-Assembly: From Molecular Morphology to Catalyst Layer Performance.

An Observer-Based Controller of Anode Pressure and Nitrogen Concentration for Fuel Cell System

Drying-controlled catalyst layer crack morphology for enhanced proton exchange membrane fuel cell performance

Health-Aware Adaptive Energy Management Strategy for Fuel Cell Vehicles Based on Variable Horizon Driving Pattern Recognition

Numerical analysis of in-plane hydrogen transport in a 25 cm2 proton exchange membrane fuel cell

Polarization decoupling based proton exchange membrane fuel cell lifetime prediction of performance “collapse point” under dynamic operating conditions

Promoting atomic ordering of intermetallic fuel cell catalysts by phase transition engineering

Optimization of shutdown control strategy for residual oxygen elimination in cathode chamber of the proton exchange membrane fuel cell stack and connected humidifier

Research on modulating catalyst layer microstructure through the construction of pre-coated catalysts

Dynamic model for estimation of hydrogen flow rate in hydrogen recirculation system for the PEM fuel cell stack