Wanlong Dong, Chunwei Ma, Wei Li, R. Cao, Chen Liang, Wan-Chao Zhu, Gaojun Mao, Xili Guo, Yong Jiang, Jianhong Chen (2022). Effects of Various Heat Inputs and Reheating Processes on the Microstructure and Properties of Low-Carbon Bainite Weld Metals Containing 4% Ni. Journal of materials engineering and performance (Print).DOI
R. Cao, C. Han, Xili Guo, Yong Jiang, Feng Liao, Fei Yang, Guishan Dou, Yingjie Yan, Jianhong Chen (2021). Effects of boron on the microstructure and impact toughness of weathering steel weld metals and existing form of boron. Materials Science & Engineering: A.DOI
W. Li, R. Cao, Wan-Chao Zhu, Xili Guo, Yong Jiang, Jianhong Chen (2021). Microstructure evolution and impact toughness variation for high strength steel multi-pass weld metals with various cooling rates. Journal of Manufacturing Processes.DOI
Guishan Dou, R. Cao, Chang-Liang Cai, Chen Han, Xili Guo, Yong Jiang, Jianhong Chen (2021). Effects of Boron Content on the Microstructure and Impact Toughness of 12Cr1MoVR Low-Alloy Heat-Resistant Steel Weld Metals. Materials.DOI
Xin-Yu Li, Yong Jiang, Ke-Fan Wu, Wanlong Dong, Feng Yang, Xing-Wang Jia, Xiaolong Xu, Jianhong Chen, R. Cao (2021). Effects of pre-tempering on the microstructure, hardness and impact toughness of the 2.25Cr–1Mo-0.25V heat-resistant steel weld metal.DOI
Lei Wang, Ji-Sen Qiao, Liang Zhu, Jianhong Chen (2020). Effects of flux bands on arc stability in flux bands constricting arc welding.DOI
Lei Wang, Ji-Sen Qiao, Jianhong Chen (2020). The Mechanism of Effect of Flux Bands on The Arc Behavior in Flux Bands Constricting Arc Welding Process. Materials.DOI
Xiao-Bo Zhang, Yangbo Yu, Bin Liu, You-Chun Zhao, Jun-Qiang Ren, Yingjie Yan, R. Cao, Jianhong Chen (2020). Microstructure characteristics and tensile properties of multilayer Al-6061/Ti-TA1 sheets fabricated by accumulative roll bonding.DOI
R. Cao, Zhaoqing Yang, Z. Chan, W. Lei, Jinmei Li, Jian-Xiao Zhang, Xiao-Wu Liang, Jianhong Chen (2020). The determination of the weakest zone and the effects of the weakest zone on the impact toughness of the 12Cr2Mo1R welded joint.DOI
Ke-Fan Wu, Yingjie Yan, R. Cao, Xin-Yu Li, Yong Jiang, Fei Yang, Xin Jia, Jianhong Chen (2020). Microstructure and Charpy Impact Toughness of a 2.25Cr-1Mo-0.25V Steel Weld Metal. Materials.DOI
Jianhong Chen, Gang Liu, Xin-Yu Li, Yong Jiang, Xinggui Mao, R. Cao (2020). Massive Ferrite Causes Toughness Decrease in Low Cr-Mo Steel Weld. Metallurgical and Materials Transactions. A.DOI
Yingjie Yan, Gang Liu, R. Cao, Xin-Yu Li, Yong Jiang, Yi-Fang Huang, Guishan Dou, Ke-Fan Wu, Jianhong Chen (2020). Sources of variability and improvement in impact toughness of a low Cr–Mo steel weld metal.DOI
R. Cao, Zhaoqing Yang, Jinmei Li, Xiao-Wu Liang, W. Lei, Jian-Xiao Zhang, Jianhong Chen (2020). Effect of Peak Temperature on Microstructure and Mechanical Properties of Thermally Simulated Welding Heat-Affected Zones for 09MnNiDR Steel. Journal of materials engineering and performance (Print).DOI
R. Cao, Yun Ding, Yingjie Yan, Xiao-Bo Zhang, Jianhong Chen (2019). Effect of heat treatment on interface behavior of martensite/austenite multilayered composites by accumulative hot roll bonding. Composite interfaces (Print).DOI
Gaojun Mao, R. Cao, C. Cayron, X. Mao, R. Logé, Jianhong Chen (2019). Effect of cooling conditions on microstructures and mechanical behaviors of reheated low-carbon weld metals. Materials Science & Engineering: A.DOI
Lei Wang, Ji-Sen Qiao, Zhen-Wen Chen, Liang Zhu, Jianhong Chen (2019). Method exploration of flux bands constricting arc welding for high-strength steel T-joints. The International Journal of Advanced Manufacturing Technology.DOI
Xiao-Bo Zhang, Yangbo Yu, Bin Liu, You-Chun Zhao, Jun-Qiang Ren, Yingjie Yan, R. Cao, Jianhong Chen (2019). In-situ investigation of deformation behavior and fracture mechanism of laminated Al/Ti composites fabricated by hot rolling. Journal of Alloys and Compounds.DOI
Lei Wang, Ji-Sen Qiao, Jianhong Chen (2019). Flux Bands Constricting Arc Ultra-narrow Gap Welding Signal Characteristics that Used for Weld Tracking. RCAE 2019.DOI
Gaojun Mao, C. Cayron, R. Cao, R. Logé, Jianhong Chen (2018). Study on Bainite/Martensite Transformation in Reheated Weld Metals. Materials Science Forum.DOI
Dong-Sheng Liu, M. Luo, Bing-Gui Cheng, R. Cao, Jianhong Chen (2018). Microstructural Evolution and Ductile-to-Brittle Transition in a Low-Carbon MnCrMoNiCu Heavy Plate Steel. Metallurgical and Materials Transactions. A.DOI
R. Cao, J. H. Chang, Q. Huang, Xiao-Bo Zhang, Yingjie Yan, Jianhong Chen (2018). Behaviors and effects of Zn coating on welding-brazing process of Al-Steel and Mg-steel dissimilar metals.DOI
R. Cao, Yun Ding, Xiao-Kang Zhao, Xiao-Bo Zhang, Xiao-Xia Jiang, Yingjie Yan, Jianhong Chen (2018). Effect of rolling reductions on microstructure and properties of 2Cr13/316L multi-layered steel composite plate by accumulative roll-bonding. Journal of Materials Research.DOI
Gaojun Mao, R. Cao, C. Cayron, R. Logé, Xili Guo, Yong Jiang, Jianhong Chen (2018). Microstructural evolution and mechanical property development with nickel addition in low-carbon weld butt joints. Journal of Materials Processing Technology.DOI
Gaojun Mao, C. Cayron, R. Cao, R. Logé, Jianhong Chen (2018). The relationship between low-temperature toughness and secondary crack in low-carbon bainitic weld metals. Materials Characterization.DOI
Gaojun Mao, C. Cayron, X. Mao, R. Cao, R. Logé, Jianhong Chen (2018). Morphological and Crystallographic Characteristics of α Structure in a Low-Carbon Iron–Nickel Alloy. Crystals.DOI
R. Cao, J. H. Chang, H.-X. Zhu, Gaojun Mao, Q.-W. Xu, Yu Shi, Jianhong Chen, P. Wang (2018). Investigation of wire selection for CMT plug joining Mg AZ31-to-galvanized steel.DOI
M. Luo, Dong-Sheng Liu, Bing-Gui Cheng, R. Cao, Jianhong Chen (2018). Mechanism of Decrease in Impact Toughness in a Low-Carbon MnCrMoNiCu Plate Steel with Increasing Austenitizing Temperature. Journal of materials engineering and performance (Print).DOI
Dong-Sheng Liu, M. Luo, Bing-Gui Cheng, R. Cao, Jianhong Chen (2018). Correction to: Microstructural Evolution and Ductile-to-Brittle Transition in a Low-Carbon MnCrMoNiCu Heavy Plate Steel. Metallurgical and Materials Transactions. A.DOI
R. Cao, Q.-W. Xu, H.-X. Zhu, Gaojun Mao, Q. Lin, Jianhong Chen, P. Wang (2017). Weldability and Distortion of Mg AZ31-to-Galvanized Steel SPOT Plug Welding Joint by Cold Metal Transfer Method.DOI
Gaojun Mao, R. Cao, Xili Guo, Yong Jiang, Jianhong Chen (2017). In Situ Observation of Kinetic Processes of Lath Bainite Nucleation and Growth by Laser Scanning Confocal Microscope in Reheated Weld Metals. Metallurgical and Materials Transactions. A.DOI
Gaojun Mao, R. Cao, Jianhong Chen, Xili Guo, Yong Jiang (2017). In-situ observation of microstructural evolution in reheated low carbon bainite weld metals with various Ni contents.DOI
Gaojun Mao, R. Cao, Jianhong Chen, Xili Guo, Yong Jiang (2017). Analytical investigation of grain size dependence of microhardness in high nickel-containing reheated weld metal.DOI
Jianhong Chen, R. Cao (2017). Micromechanism of Cleavage Fracture of Weld Metals.DOI
Gaojun Mao, R. Cao, Jianhong Chen (2017). Analysis on bainite transformation in reheated low-carbon bainite weld metals.DOI
Gaojun Mao, R. Cao, Jun Yang, Yong Jiang, Shuai Wang, Xili Guo, Jun-Jun Yuan, Xiao-Bo Zhang, Jianhong Chen (2017). Effect of Nickel Contents on the Microstructure and Mechanical Properties for Low-Carbon Bainitic Weld Metals. Journal of materials engineering and performance (Print).DOI
R. Cao, Q. Huang, Chun Zeng, B. Ai, Q. Lin, Jianhong Chen, P. Wang (2016). Cold Metal Transfer Plug Welding of Aluminum AA6061-T6-to-Bare Mild Steel.DOI
Q. Lin, Gaojun Mao, Qian Huang, R. Cao, Jianhong Chen (2016). Effect of Zn Vaporization on Wetting of Al-galvanized Steel in Cold Metal Transfer Process.DOI
Q. Lin, Gaojun Mao, Qian Huang, R. Cao, Jianhong Chen（2016）. 冷間金属移動プロセスにおけるAl亜鉛めっき鋼の濡れ性に及ぼすZn蒸発の影響【Powered by NICT】.
Q. Lin, Peng Jin, R. Cao, Jianhong Chen (2016). Reactive wetting of low carbon steel by Al 4043 and 6061 alloys at 600–750 °C.DOI
R. Cao, Xiao-Kang Zhao, Xiao-Bo Zhang, Hai-Yang Zhang, You-Chun Zhao, Jianhong Chen (2016). The milling method of multilamellar stainless steel metal composite plate.
Q. Lin, C. Zeng, R. Cao, Jianhong Chen (2016). The spreading simulation of molten Al alloy on Q235 steel in the first cycle of cold metal transfer process.DOI
Zhi-Peng Cai, B. Ai, Rui Cao, Qiao-Li Lin, Jianhong Chen (2016). Microstructure and properties of aluminum AA6061-T6 to copper (Cu)-T2 joints by cold metal transfer joining technology.DOI
R. Cao, Jin-Bao Li, Dong-Sheng Liu, Jun Ma, Jianhong Chen (2015). Micromechanism of Decrease of Impact Toughness in Coarse-Grain Heat-Affected Zone of HSLA Steel with Increasing Welding Heat Input. Metallurgical and Materials Transactions. A.DOI
Q. Lin, Fan Yang, R. Cao, Jianhong Chen, T. Guo (2015). Wetting and Interfacial Characteristics of Mg AZ61 Alloy/Galvanized Steel in Cold Metal Transfer Process. Metallurgical and Materials Transactions. A.DOI
Cen Wang, Qing Wang, Q. Lin, R. Cao, C. Dong, Jianhong Chen (2015). Numerical simulation on temperature distribution of cold metal transfer joining magnesium to titanium dissimilar metals.
R. Cao, Junhao Sun, Jianhong Chen (2015). Analysis of welding-brazing joints of Ti/Al dissimilar metals obtained by cold metal transfer method.
Haixia Zhu, R. Cao, Qian Huang, Jianhong Chen (2015). Analysis on cold metal transfer spot plug welding process of aluminum alloys for automobile body.
Qiao-Li Lin, Y. Zhou, Rui Cao, Jianhong Chen (2015). Wetting of steel by Al 4043 alloys in cold metal transfer process.DOI
M. Jing, Zhenlin Feng, R. Cao, Jianhong Chen (2015). Microstructure, bonding mechanism and corrosion property of titanium TA2/copper T2 welded joint by cold metal transfer technology.
Zhe Wang, Rui Cao, Jianhong Chen, Ji Zhang (2014). Toughening Mechanisms of Lamellar TiAl Alloys Containing B2 Phase at Room Temperature.DOI
W. Meng, Zhu-Guo Li, Jian Huang, Yi-Xiong Wu, Jianhong Chen, S. Katayama (2014). The influence of various factors on the geometric profile of laser lap welded T-joints.DOI
W. Meng, Zhu-Guo Li, Feng-Gui Lu, Yi-Xiong Wu, Jianhong Chen, S. Katayama (2014). Porosity formation mechanism and its prevention in laser lap welding for T-joints.DOI
Rui Cao, M. Jing, Zhili Feng, Jianhong Chen (2014). Cold metal transfer welding–brazing of magnesium to pure copper.DOI
R. Cao, Q. Huang, Jianhong Chen, P. Wang (2014). Cold metal transfer spot plug welding of AA6061-T6-to-galvanized steel for automotive applications.DOI
Peng-Xian Zhang, Zhifen Zhang, Jianhong Chen (2014). Online Diagnosis of Joints Quality in Resistance Spot Welding for Sedan Body.DOI
R. Cao, T. Wang, Chun-Qing Wang, Z. Feng, Q. Lin, Jianhong Chen (2014). Cold metal transfer welding–brazing of pure titanium TA2 to magnesium alloy AZ31B.DOI
R. Cao, Z. Feng, Q. Lin, Jianhong Chen (2014). Study on cold metal transfer welding–brazing of titanium to copper.DOI
R. Cao, Z. Feng, Jianhong Chen (2014). Microstructures and properties of titanium–copper lap welded joints by cold metal transfer technology.DOI
Jianhong Chen, Lingjian Zhu, Dengxin Hua (2012). [Determination of sodium by near infrared spectroscopy]. PubMed.
Tao Liu, Jianhong Chen, Shinji Sugihara, Yasushi Maeda (2012). Study on hydration of poly(N-vinylcaprolactam) microgels by near-IR and mid-IR spectroscopy. Colloid & Polymer Science.DOI
Jianhong Chen (2012). Influence rule of HAZ geometrical dimension to aluminum alloy joint' deformation and strength.
R. Cao, Bao-Feng Wen, Pei-Zhong Wang, Jianhong Chen, Liang Zhu, Yu Shi (2012). Cold metal transition melting-brazing welding connection method for dissimilar magnesium metal and aluminum metal.
Gang-Jin Yu, Rui Cao, Jianhong Chen (2011). Cold metal transfer connection method of aluminum/steel dissimilar metal.
Shao-Kan Zheng, Liang Zhu, Jianhong Chen (2011). Relationship between position of flux strips in arc zone of ultra-narrow gap and constricting arc.
R. Cao, S.-S. Zhu, W. Feng, Y. Peng, F. Jiang, Wanying Du, Z. Tian, Jianhong Chen (2011). Effects of weld metal property and fraction on the toughness of welding joints of a 8%Ni 980 MPa high strength steel.DOI
Rui Cao, W. Feng, Yun Peng, Wanying Du, Z. Tian, Jianhong Chen (2010). Analysis on impact property of welded joint HAZ of 980 MPa high strength steel.
Jianhong Chen (2010). Study of mechanics property and fracture behaviors on 6061 aluminum alloy under different stress states.
Jianhong Chen (2010). Mechanism of Cleavage Fracture of HSLA Steels and TiAl Alloys.DOI
R. Cao, L. Li, Jianhong Chen, J.-L. Zhang (2010). Study on compression deformation, damage and fracture behavior of TiAl alloys: Part II. Fracture behavior.DOI
Jianhong Chen (2010). A prediction of nugget area in RSW.
Jianhong Chen (2008). Heating characteristic of constricting arc with flux strips in ultra-narrow gap welding.
R. Cao, Y. Z. Lin, D. Hu, Jianhong Chen (2008). Fracture behaviour of a TiAl alloy under various loading modes.DOI
Jianhong Chen (2008). Analysis of correlation between position of flux strip in its constricting arc and potential of flux strip.
Jianhong Chen (2008). Investigation of ductile fracture mechanism on 6063 aluminum alloy.
Jianhong Chen (2008). Fault diagnosis in the processing of RSW based on electrode displacement signals.
Hao Zhu, Liang Zhu, Jianhong Chen (2008). Damage and fracture mechanism of 6063 aluminum alloy under three kinds of stress states.DOI
Jianhong Chen (2008). Physical models for cleavage fracture at various temperatures—Bases for local approach to fracture of HSLA steel.DOI
Wanying Du, R. Cao, Yingjie Yan, Z. Tian, Y. Peng, Jianhong Chen (2008). Fracture behavior of 9% nickel high-strength steel at various temperatures Part I. Tensile tests.DOI
Jianhong Chen (2008). Design and simulation of intelligent PID controller for aluminum alloy pulsed MIG welding process.
Jianhong Chen (2007). Numerical simulation on temperature field in laser welding of thin aluminum alloy plate with different thickness.
Jianhong Chen (2007). Identification of the Damage Parameters of Aluninium Alloy AA6014 with Inverse Technique.
Jianhong Chen (2007). Measure on temperature field of aluminium alloy of different thickness on laser welding.
Jianhong Chen (2007). Current Situation and Prospects for Investigation of Fractal Fracture of Materials.
R. Cao, Min Lei, Jianhong Chen, Jian Zhang (2007). Effects of loading rate on damage and fracture behavior of TiAl alloys.DOI
Hao Zhu, Jianhong Chen (2007). Influence of Stress Triaxiality and Strain Rate on the Mechanics Behavior of 6063 Aluminum Alloy and Material Characterization.
乔及森，唐薛琴，陈剑虹，朱亮 (2007). Assessment of mechanical properties of aluminium alloy welded joint using small punch test. China Welding.
Jianhong Chen (2007). CO_2 laser welding of tailored 5A02 aluminum alloy sheets with different thickness using filler powder.
Hong-Yan Che, Liang Zhu, Dong Sun, Jianhong Chen, Hao Zhu (2007). Characterization and Modeling of Aluminum Extrusion Damage Under Crash Loading.DOI
R. Cao, Jianhong Chen, J. Zhang (2007). Study on Fracture Mechanisms of TiAl Alloys by In Situ Tensile Tests.DOI
Jianhong Chen (2007). Failure Model for Aluminum Alloy Adhesive Joints.
Jianhong Chen (2007). Physical Models for Cleavage Fracture at Various Temperatures.DOI
Hao Zhu, Liang Zhu, Jianhong Chen, Xianghui Lv (2007). Investigation of fracture mechanism of 6063 aluminum alloy under different stress states.DOI
朱亮，郑韶先，陈剑虹 (2006). Development of ultra-narrow gap welding with constrained arc by flux band. China Welding.
Jianhong Chen (2006). Fuzzy inference system model based on electrode displacement signals during resistance spot welding.
S.-R. Yu, Z.-G. Yan, R. Cao, Jianhong Chen (2006). On the change of fracture mechanism with test temperature.DOI
余淑荣，樊丁，熊进辉，陈剑虹 (2006). CO2laser welding of 5A06 aluminum alloy plates with different thicknesses. Transactions of Nonferrous Metals Society of China.
Jianhong Chen (2006). SVM classifier for wire extension monitoring using arc sound signal in GMAW.
Jianhong Chen (2006). Computer monitoring and controlling system for AC resistance spot welding.
Ji-Sen Qiao, Jianhong Chen, Liang Zhu (2006). The Use of Small Punch Sample for Testing of Mechanics Properties of Aluminium Alloy Welded Joint.DOI
R. Cao, Hai-Jun Yao, Jianhong Chen, Jian Zhang (2006). On the mechanism of crack propagation resistance of fully lamellar TiAl alloy.DOI
Ji-Sen Qiao, Jianhong Chen, Hong-Yan Che (2006). Crashworthiness assessment of square aluminum extrusions considering the damage evolution.DOI
Hao Zhu, Jianhong Chen (2006). Study of mechanical performance and analysis of fracture surfaces of aluminum alloy in three patterns of stress state.
Min Lei, Jianhong Chen, Ji Zhang (2006). Effect of loading speed on fracture mechanism of TiAl-based alloys.
朱浩，朱亮，陈剑虹，车洪艳 (2006). Deformation and damage mechanism of aluminum alloy under different stress states. Transactions of Nonferrous Metals Society of China.
Jianhong Chen (2006). Characterization of mechanical properties for aluminium alloy welded joint.
Jianhong Chen (2004). RBF network model of nugget sizes in resistance spot welding.
G.-Z. Wang, Y.-G. Liu, Jianhong Chen (2004). Investigation of cleavage fracture initiation in notched specimens of a C–Mn steel with carbides and inclusions.DOI
Jianhong Chen, G.-Z. Wang, R. Cao, Jian Zhang (2004). Study on notch fracture of TiAl alloys at room temperature.DOI
G.-Z. Wang, Jianhong Chen, X.-C. Ren (2004). Effects of loading rate on fracture behavior of low-alloy steel with different grain sizes.DOI
Jianhong Chen (2004). Rogowski current transducer applied in data collection of for resistance spot welding.