百晓学者学者目录

袁成清

武汉理工大学能源与动力工程学院

个人简介

袁成清,男,1976年2月出生,武汉理工大学教授、博士生导师,现任交通与物流工程学院院长、水路交通控制全国重点实验室副主任。研究领域包括船舶摩擦学、船港新能源及综合能效提升、船载装备智能控制、交通能源融合、新能源储运工程。曾赴英国利兹大学、基尔大学和澳大利亚悉尼大学开展合作研究。

精选作品

期刊论文

  1. 曹欣卉,孙玉伟,李梦馨,袁成清,郑亚东,熊登攀(2026). 不同工质的特斯拉涡轮机气动特性差异分析. 《船舶工程》.DOI
  2. 冯润麒,郭智威,薛恩驰,袁成清(2026). 基于深度迁移学习的水润滑轴承跨工况状态辨识. 《机械工程学报》.
  3. 侯志皓,郭智威,吴祖旻,袁成清(2026). 导水槽结构参数对水轮机导轴承润滑性能的影响. 《润滑与密封》.
  4. 童亮,袁裕鹏,袁成清,唐道贵,钟晓晖,严新平(2026). 水运港-船多能源融合技术及集成应用——以宁波舟山港穿山港区为例. 《交通运输研究》.
  5. 秦少谦,郭智威,吴祖旻,赵鼎元,袁成清(2026). 内河船舶水润滑轴承设计与开发:摩擦学技术进展和挑战. 《摩擦学学报(中英文)》.
  6. 侯志皓,郭智威,吴祖旻,袁成清(2026). 水润滑条件下聚甲醛、聚对苯二甲酸乙二醇酯、聚醚酰亚胺的摩擦学性能研究. 《材料保护》.
  7. Hai-Huan Sun, Xiao-Yan He, Zongcheng Yang, Xiao-Qing Dou, Wen-Han Fan, Cheng-Qing Yuan, Xiu-Qin Bai (2026). Defect-engineered Cu-CeO2 nanozymes with boosted haloperoxidase mimicry for marine antifouling efficacy at ultra-low dosage. Separation and Purification Technology.DOI
  8. 郑占模,董从林,袁成清,白秀琴(2025). 二氧化硅纳米颗粒协同碳纤维增强复合材料防滑和耐磨性能研究. 《摩擦学学报(中英文)》.
  9. 杨宗榕,郭智威,袁成清,白秀琴,王超宝(2025). 自修复微胶囊对UHMWPE复合材料的摩擦学性能影响. 《清华大学学报(自然科学版)》.DOI
  10. 邓通,张彦,唐若笠,袁成清(2025). 光伏阵列拓扑结构在不同故障下的特性分析. 《太阳能学报》.
  11. 范爱龙,田智齐,王颖琦,杨柳,尹奇志,袁成清(2025). “寓研于教,思专融合”研究生教学模式研究——以水路交通装备能效提升课程为例. 《高教学刊》.DOI
  12. 劳绩东,董从林,郑占模,袁成清,白秀琴(2025). 改性聚氨酯材料在含砂水质中的摩擦学和振动特性研究. 《表面技术》.DOI
  13. 王枭,赵山峰,张乾能,樊锐,袁成清,任海东(2025). 面向港口关键起重设备调峰的协调优化运行方法. 《交通信息与安全》.
  14. Yu-Han Liu, Xiao-Yan He, Ying Yang, Xianfu Yuan, Zi-Quan Zhou, Xiu-Qin Bai, Cheng-Qing Yuan (2025). Corrosion behavior of Limnoperna fortunei on carbon steel in freshwater environments. npj Materials Degradation.DOI
  15. Yan Yang, Jing-Fu Chen, T. Amann, Cheng-Qing Yuan, Ke Li (2025). Improved Oxidation Stability of 1,3‐Diketone Superlubricity Fluid Using a Butylated Hydroxytoluene Additive. Lubrication Science.DOI
  16. Tong Lou, Xueqiang Zhuang, Jiang-Fan Chang, Yali Gao, Cheng-Qing Yuan, Xiu-Qin Bai (2025). Development of a Multifunctional Antimicrobial Peptide for Marine Antifouling by Theoretical Calculations and Experimental Approaches. ACS Applied Materials and Interfaces.DOI
  17. Hai-Huan Sun, Xiao-Yan He, Cheng-Qing Yuan, Xiu-Qin Bai (2025). Research progress and performance enhancement strategies of marine antifouling hydrogel coatings. Progress in Organic Coatings.DOI
  18. 郭智威,冯润麒,何阳,袁成清(2024). 纤维材质对UHMWPE水润滑轴承复合材料摩擦学性能的影响. 《摩擦学学报(中英文)》.
  19. 刘李繁星,盛晨兴,殷华兵,周立伟,吴铭定,袁成清(2024). 石墨烯/凹凸棒石复合润滑添加剂对缸套-活塞环润滑性能的影响. 《船舶工程》.
  20. 袁成清(2024). 船用光伏发电系统.
  21. 石慧,张彦,袁成清,邓通(2024). 内河船舶绿色化评估体系及评估方法研究. 《中国航海》.
  22. 吴承志,童亮,袁裕鹏,张乾能,袁成清(2024). 穿山港区制氢加氢一体站的输氢管道设计. 《交通科技》.
  23. 郭智威,吴祖旻,饶响,袁成清,严新平(2024). 船舶与港口装备轻量化技术的研究现状与展望. 《现代交通与冶金材料》.
  24. 孙玉伟,陈晨,秦天阳,袁成清,赵庆(2024). 高速S-CO2向心透平几何参数优化及变工况特性分析. 《中国电机工程学报》.
  25. 袁裕鹏,许朝远,李娜,唐道贵,袁成清,钟晓晖,严新平(2024). 港口多能源融合系统综述. 《交通运输工程学报》.
  26. 刘永琪,袁成清,饶响,郭智威(2024). 基于激光熔覆的缸套表面梯度材料制备及其摩擦学性能研究. 《表面技术》.
  27. 柳晨光,袁成清,翟华,严新平(2024). 福建省电动船舶产业发展现状与未来趋势. 《海峡科学》.
  28. 孙玉伟,林杰,刘小华,卢明剑,危卫,袁成清(2024). 超临界CO2印刷电路板式换热器动态特性研究. 《热科学与技术》.
  29. Pan Cao, Xuxu Dong, Cheng-Qing Yuan, Xiu-Qin Bai, Chao Zhang (2024). Enhanced marine biofouling and corrosion resistance through springtails-inspired papillate-like micropillar arrays surface modified by antimicrobial peptide. Surface & Coatings Technology.DOI
  30. Yu-Han Liu, Xiao-Yan He, Ying Yang, Xiu-Qin Bai, Cheng-Qing Yuan (2024). Distribution, tolerance, growth, behaviour and control methods of Limnoperna fortunei (Dunker, 1857) (Bivalvia: Mytilidae): A review. Aquatic conservation.DOI
  31. Shaoli Jiang, Debashis Puhan, Jian Huang, Zongrong Yang, Liyuan Zhang, Tian Yuan, Xiu-Qin Bai, Cheng-Qing Yuan (2024). Tribological properties of graphene-reinforced polyurethane bearing material. Tribology International.DOI
  32. Dan Su, Xiao-Yan He, Jiang-Wei Zhou, Cheng-Qing Yuan, Xiu-Qin Bai (2024). Facet-dependent haloperoxidase-like activities of CeO2 nanoparticles contribute to their excellent biofilm formation suppression abilities. Journal of Hazardous Materials.DOI
  33. Shaoli Jiang, Janet S. S. Wong, Debashis Puhan, Tian Yuan, Xiu-Qin Bai, Cheng-Qing Yuan (2024). Tribological evaluation of thermoplastic polyurethane-based bearing materials under water lubrication: Effect of load, sliding speed, and temperature. Friction.DOI
  34. Xiao-Yan He, Dan Su, Xiu-Qin Bai, Cheng-Qing Yuan (2024). Chemically Modulating Ceria-Based Artificial Haloperoxidase for Enhanced Antibacterial Activity and Biofilm Inhibition. ACS Applied Materials and Interfaces.DOI
  35. Wencheng Liu, Tong Lou, Xiu-Qin Bai, Xiao-Yan He, Cheng-Qing Yuan (2024). Experimental and molecular dynamics simulation study on antifouling performance of antimicrobial peptide‐modified aluminum alloy surfaces. Surface and Interface Analysis.DOI
  36. Zongcheng Yang, Xiao-Yan He, Tong Lou, Dan Su, Xiu-Qin Bai, Cheng-Qing Yuan (2024). Fabrication of dual functional marine antifouling coatings by infusing epoxy silicone oil modification of quaternary ammonium. European Polymer Journal.DOI
  37. 袁成清,殷华兵,饶响,徐懿聪,盛晨兴,郭智威(2023). 船舶柴油机缸套/活塞环材料及其磨损控制研究进展. 《船舶工程》.
  38. 陈晨,董从林,张湘军,袁成清,白秀琴(2023). 泥沙条件下改性复合材料减振降噪性能研究. 《润滑与密封》.
  39. 毕钰,郭智威,袁成清(2023). 水凝胶/热塑性聚氨酯复合材料在水润滑条件下的摩擦学性能. 《润滑与密封》.
  40. 刘奇,孟召喆,袁成清,董光能(2023). 船用内燃机轴瓦表面含MoS2的PAI/PTFE聚合物复合涂层制备及减摩抗磨研究. 《润滑与密封》.
  41. 冯龙祥,汤旭晶,袁成清,唐金锐,殷华兵,孙玉伟(2023). 新能源船舶复合储能技术发展现状与展望. 《哈尔滨工程大学学报》.
  42. 贺小燕,白秀琴,袁成清,任坤(2023). 纳米复合海洋防污涂料研究进展. 《中国表面工程》.
  43. 郑占模,董从林,袁成清,张湘军,白秀琴,吴宇航(2023). 二硫化钼的粒径对聚氨酯复合材料摩擦学性能的影响. 《表面技术》.
  44. 张彦,袁成清(2023). 建设交通强国应怎样培养全方位人才. 《中国水运》.
  45. 蒋一鹏,袁成清,袁裕鹏,董明望,江涛,钟晓晖,童亮(2023). “双碳”战略下中国港口与清洁能源融合发展路径探析. 《交通信息与安全》.
  46. 王攀,张湘军,董从林,白秀琴,袁成清,汤敏(2023). 船舶转叶式舵机故障诊断系统. 《舰船科学技术》.
  47. 冯龙祥,汤旭晶,李昕,袁裕鹏,孙玉伟,袁成清(2023). 计及电池全寿命周期的船舶复合储能多目标容量配置研究. 《中国航海》.
  48. 孙玉伟,刘勇,吴健,袁成清,汤旭晶(2023). 并网型交直交电源对船舶电力系统暂态稳定性影响的仿真分析. 《上海海事大学学报》.
  49. 周雨诗,张彦,王海金,唐若笠,袁成清(2023). 基于ArcGIS与多因子模型的风力发电场选址评估. 《太阳能学报》.
  50. 孙玉伟,刘阜林,危卫,袁成清,宋振国(2023). 超临界二氧化碳布雷顿循环冷源扰动控制研究. 《中国舰船研究》.
  51. 张彦,石慧,袁成清,姜磊(2023). 内河绿色船舶测试体系研究. 《航海技术》.
  52. 杨长春,丁翔,田英豪,袁成清,王韶毅(2023). CeO2改性多尺度WC-CoCr涂层组织结构及空蚀性能研究. 《功能材料》.
  53. 臧红双,白秀琴,梁兴鑫,郭智威,袁成清(2023). 船舶艉轴机械密封材料摩擦磨损性能研究. 《润滑与密封》.
  54. Fu-Ming Kuang, Haideng Mu, Jian Huang, Gao Wan, Cheng-Qing Yuan, Xin-Cong Zhou (2023). Theoretical and In Situ High Speed Measurement Study on Friction-Induced Vibration in Water Lubricated Rubber Bearing-Shaft System. Tribology Transactions.DOI
  55. Yuhan Liu, Xiao-Yan He, Cheng-Qing Yuan, Pan Cao, Xiu-Qin Bai (2023). Antifouling applications and fabrications of biomimetic micro-structured surfaces: A review. Journal of Advanced Research.DOI
  56. Jinyang Song, Cong-Lin Dong, Xiu-Qin Bai, Cheng-Qing Yuan, Yuhang Wu (2023). Tribological Characteristics of Rotary Vane Steering Gear Seals Under the Oil With Different Abrasive Particle Sizes. Tribology Transactions.DOI
  57. Zongcheng Yang, Xiao-Yan He, Tong Lou, Xiu-Qin Bai, Cheng-Qing Yuan (2023). Infusing paraffin-based lubricant into micro-/nanostructures for constructing slippery marine antifouling coatings. Progress in Organic Coatings.DOI
  58. Tong Lou, Xiu-Qin Bai, Xiao-Yan He, Wencheng Liu, Zongcheng Yang, Ying Yang, Cheng-Qing Yuan (2023). Antifouling performance of d-enantiomers-based peptide-modified aluminum alloy surfaces with enhanced stability against proteolytic degradation. Journal of Materials Science.DOI
  59. Yuhang Wu, Cong-Lin Dong, Xiu-Qin Bai, Cheng-Qing Yuan (2023). Enhancing friction and vibration reduction properties of a polymer using h-BN particles. Wear.DOI
  60. Shi-Fan Li, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2023). Effects of TiO2 nano-particles on wear-resistance and vibration-reduction properties of a polymer for water-lubricated bearing. Wear.DOI
  61. Liyuan Zhang, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2023). Frictional vibration behaviors of a new piezo-damping composite under water-lubricated friction. Wear.DOI
  62. H. Yin, Xuecheng Zhang, Zhi-Wei Guo, Yi-Cong Xu, Xiang Rao, Chengqing Yuan (2023). Synergetic effects of surface textures with modified copper nanoparticles lubricant additives on the tribological properties of cylinder liner-piston ring. Tribology International.DOI
  63. Shengkang Dong, Zhi-Wei Guo, Hongshuang Zang, Chengqing Yuan (2023). Effect of Silicon Carbide Particles on Tribological Properties of Polytetrafluoroethylene Water-Lubricated Bearing Composites. Journal of materials engineering and performance (Print).DOI
  64. Ke Li, Yan Yang, Tobias Amann, Chengqing Yuan (2023). Synergistic Effect of 1,3-diketone Fluid and Carbon-based Nanoparticles as Hybrid Eco-friendly Additives in Polyalphaolefin Oil. Tribology letter.DOI
  65. Zhu Zhang, Wu Ouyang, Xing-Xin Liang, Xin-Ping Yan, Chengqing Yuan, Xin-Cong Zhou, Zhi-Wei Guo, Cong-Lin Dong, Zheng-Lin Liu, Yong Jin, Jinhua Xiao (2023). Review of the evolution and prevention of friction, wear, and noise for water-lubricated bearings used in ships. Friction.DOI
  66. Yuwen Xu, Zhong-Qing Nie, Junsheng Li, Chen Du, Tobias Amann, Chengqing Yuan, Ke Li (2023). Enhanced Superlubricity of 1,3-Diketone Oil by Doping Polydopamine Functionalized Silica Nano-additive. Tribology International.DOI
  67. Xiang Rao, C. Sheng, Zhi-Wei Guo, Leyang Dai, Chengqing Yuan (2023). A novel finding on tribological, emission, and vibration performances of diesel engines linking to graphene-attapulgite lubricants additives under hot engine tests. Renewable & Sustainable Energy Reviews.DOI
  68. Xue-Fei Li, Zhi-Wei Guo, Qi-Ren Huang, Chengqing Yuan (2023). Insight into the Lubrication Performance of Biomimetic Porous Structure Material for Water-lubricated Bearings. Journal of Bionic Engineering.DOI
  69. Liyuan Zhang, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2023). Novel Wood-Based Functional Material with Vibration and Noise Reduction. ACS Applied Materials and Interfaces.DOI
  70. Zu-Min Wu, Zhi-Wei Guo, Chengqing Yuan, Qi-Ren Huang, Chun Wang, Hong-Yuan Zhao (2023). Lignum vitae wood-derived composites for high lubricating performance. Journal of Cleaner Production.DOI
  71. Zu-Min Wu, Chengqing Yuan, Zhi-Wei Guo, Qi-Ren Huang (2023). Effect of the groove parameters on the lubricating performance of the water-lubricated bearing under low speed. Wear.DOI
  72. Zongcheng Yang, Jiang-Fan Chang, Xiao-Yan He, Xiu-Qin Bai, Chengqing Yuan (2023). Construction of robust slippery lubricant-infused epoxy-nanocomposite coatings for marine antifouling application. Progress in Organic Coatings.DOI
  73. Jia-Zhen Chen, Xing-Xin Liang, Zhi-Wei Guo, Xue-Fei Li, Chengqing Yuan (2023). Insight into the wear properties of fiber fabric surface-enhanced composite under water lubrication. Tribology International.DOI
  74. Xiang Ding, Qun Wang, Yinghao Tian, C. Yang, Chengqing Yuan, C. S. Ramachandran (2023). Microstructure and Wear Performance of CeO2-Modified Micro-Nano Structured WC-CoCr Coatings Sprayed with HVOF. Lubricants.DOI
  75. Chuanbo Liu, Chengqing Yuan, Shu-Tian Liu (2023). The Effect of Intrinsic Mechanical Properties on Reducing the Friction-Induced Ripples of Hard-Filler-Modified HDPE. Polymers.DOI
  76. Yue-Yue Ge, Ning Lin, Chen Du, Tobias Amann, Hao Feng, Chengqing Yuan, Kemei Li (2023). Improved boundary lubrication of perfluoropolyether using fluoropolymer-grafted cellulose nanocrystal. Cellulose.DOI
  77. Tongfang Lou, Xiu-Qin Bai, Xiao-Yan He, Wencheng Liu, Zongcheng Yang, Ying Yang, Chengqing Yuan (2023). Enhanced antifouling properties of marine antimicrobial peptides by PEGylation. Frontiers in Bioengineering and Biotechnology.DOI
  78. Qiran Xu, Zhi-Wei Guo, Qi-Ren Huang, Chengqing Yuan (2023). Effect of chain extender content on tribological properties of polyurethane under water‐lubrication. Journal of Applied Polymer Science.DOI
  79. 袁裕鹏,袁成清,徐洪磊,严新平,何琳(2022). 我国水路交通与能源融合发展路径探析. 《中国工程科学》, Vol. 24, No. 3.下载原文
  80. 楼彤,白秀琴,贺小燕,杨膺,杨宗澄,袁成清(2022). 抗菌肽在海洋防污领域的研究进展. 《中国表面工程》.
  81. 白鼎甲,白秀琴,郭智威,袁成清(2022). 大型邮船海水泵叶轮材料的空蚀性能. 《船舶工程》.
  82. 徐起秀,王裕,郭智威,袁成清(2022). 极地运行环境对水润滑轴承材料摩擦学性能影响研究. 《舰船科学技术》.
  83. 孙玉伟,吴健,刘勇,袁成清,汤旭晶(2022). 集成超临界二氧化碳布雷顿循环发电装置的船舶电力系统暂态稳定性分析. 《上海海事大学学报》.
  84. 董彬杰,董从林,白秀琴,袁成清(2022). 人工海水溶液中系泊链钢的腐蚀磨损行为. 《表面技术》.
  85. 王裕,徐起秀,郭智威,袁成清(2022). 基于随机森林算法的改性水润滑轴承摩擦性能预测. 《润滑与密封》.
  86. 袁成清,石慧,姜磊,张彦,侯钧瀚(2022). 绿色船舶法规政策发展动态及趋势. 《中国水运》.
  87. 薛恩驰,郭智威,Hongyuan Zhao,袁成清(2022). 智能水润滑轴承的设计与可行性综述(英文). Journal of Marine Science and Application.
  88. 严新平,张笛,袁成清,吴兵,刘佳仑,陈德山,汪洋,欧阳武,柳晨光,蒋仲廉,杨琨(2022). 水路交通控制的研究现状与发展趋势. 《水上安全》.
  89. 孙玉伟,潘云峰,王佳伟,袁成清(2022). 船舶柴油机烟气余热利用过程的交互性影响研究. 《中国修船》.
  90. 朱昭宇,董从林,刘书天,袁成清,吴宇航(2022). 水环境下纳米SiO2增强超高分子量聚乙烯防滑性能的影响研究. 《摩擦学学报(中英文)》.
  91. 刘众志,郭智威,袁成清(2022). 豪华邮轮油性舱底水系统设计. 《舰船科学技术》.
  92. Ji Liu, Tongzhou Chen, Chengqing Yuan, Xiu-Qin Bai (2022). Effect of corrosion on cavitation erosion behavior of HVOF sprayed cobalt-based coatings. Materials Research Express.DOI
  93. Jiang-Fan Chang, Xiao-Yan He, Zongcheng Yang, Xiu-Qin Bai, R. J. K. Wood, J. Wharton, Ping Lu, Chengqing Yuan (2022). Surface topography effects on the wettability and antifouling performance of nano-ZnO epoxy composite coatings. Surface & Coatings Technology.DOI
  94. H. Yin, Xuecheng Zhang, Zhi-Wei Guo, Zhongzhi Liu, Xiang Rao, Chengqing Yuan (2022). Effect of copper nanoparticle concentration on tribological performances of cylinder liner piston ring. Lubrication Science.DOI
  95. Pan Cao, D. Liu, Yuhan Liu, Huming Wang, Chao Zhang, Chengqing Yuan, Xiaodan Liu (2022). Marine antifouling behavior of the surfaces modified by dopamine and antibacterial peptide. Journal of Oceanology and Limnology.DOI
  96. Liyuan Zhang, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Ye Tian (2022). The role of graphene nanoplatelets in the friction reducing process of polymer. Polymer Composites.DOI
  97. Yuhang Wu, Cong-Lin Dong, Xiu-Qin Bai, Chengqing Yuan, Xiang-Jun Zhang (2022). A novel green and low friction composite reinforced by lignum vitae chips. Polymer testing.DOI
  98. Pan Cao, Huming Wang, Mingyi Zhu, Yi-Feng Fu, Chengqing Yuan (2022). Integration of Antifouling and Underwater Sound Absorption Properties into PDMS/MWCNT/SiO2 Coatings. Biomimetics.DOI
  99. J. Liu, Tongzhou Chen, H. Duan, Chengqing Yuan, Xiu-Qin Bai (2022). Mechanical Properties and Cavitation Erosion Behavior of CeO2-Modified Dual-scale WC-10Co-4Cr Coating Prepared by HVOF. Journal of thermal spray technology (Print).DOI
  100. Xiang Rao, C. Sheng, Zhi-Wei Guo, Chengqing Yuan (2022). A review of online condition monitoring and maintenance strategy for cylinder liner-piston rings of diesel engines. Mechanical systems and signal processing.DOI
  101. Shu-Tian Liu, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2022). Friction reduction behavior of oil-infused natural wood. Friction.DOI
  102. Xiang Rao, C. Sheng, Zhi-Wei Guo, Xuecheng Zhang, Hua-Bing Yin, Changkun Xu, Chengqing Yuan (2022). Anti‐friction and self‐repairing abilities of ultrafine serpentine, attapulgite and kaolin in oil for the cylinder liner‐piston ring tribo‐systems. Lubrication Science.DOI
  103. Tongfang Lou, Xiu-Qin Bai, Xiao-Yan He, Wencheng Liu, Ying Yang, Chengqing Yuan (2022). Antifouling performance and mechanism analysis of marine peptide modified aluminum alloy surface. Surface & Coatings Technology.DOI
  104. Xue-Fei Li, Zhiwei Guo, Qi-Ren Huang, Chengqing Yuan (2022). Application of Bionic Tribology in Water-Lubricated Bearing: A Review. Journal of Bionic Engineering.DOI
  105. Jiang-Fan Chang, Xiao-Yan He, Zongcheng Yang, Xiu-Qin Bai, Chengqing Yuan (2022). Effects of chemical composition on the hydrophobicity and antifouling performance of epoxy-based self-stratifying nanocomposite coatings. Progress in Organic Coatings.DOI
  106. Yang He, Zhi-Wei Guo, Wu Ouyang, Chengqing Yuan (2022). An Investigation into Water Lubrication Performance of UHMWPE Reinforced with Oriented Polyester Fiber of Different Densities. Fibers And Polymers.DOI
  107. Shi-Fan Li, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2022). Friction-reducing and vibration-absorbing performances on a novel thermoplastic bearing material reinforced by nano-WS2 and UHMWPE. Tribology International.DOI
  108. Jia-Zhen Chen, Zhi-Wei Guo, Xue-Fei Li, Chengqing Yuan (2022). Development of gradient structural composite for improving tribological performance of PU material in water-lubricated bearings. Tribology International.DOI
  109. Yuhang Wu, Cong-Lin Dong, Xiu-Qin Bai, Chengqing Yuan (2022). The roles of T-ZnOw and MoS2 particles in the friction-induced vibration reducing the process of polymer. Materials & Design.DOI
  110. Enchi Xue, Zhi-Wei Guo, Hong-Yuan Zhao, Chengqing Yuan (2022). A Review of the Design and Feasibility of Intelligent Water-Lubrication Bearings. Journal of Marine Science and Application.DOI
  111. X. Liu, Zhi-Wei Guo, Dingjia Bai, Chengqing Yuan (2022). Study on the mechanical properties and defect detection of low alloy steel weldments for large cruise ships. Ocean Engineering.DOI
  112. Pan Cao, D. Liu, Yanbing Zhang, Fei Xiao, Chengqing Yuan, Feng Liang, Xiaodan Liu, C. Zhang (2022). Dopamine-assisted sustainable antimicrobial peptide coating with antifouling and anticorrosion properties. Applications of Surface Science.DOI
  113. Jingwen Li, Ning Lin, Chen Du, Yue-Yue Ge, Tobias Amann, Hao Feng, Chengqing Yuan, Kemei Li (2022). Tribological behavior of cellulose nanocrystal as an eco-friendly additive in lithium-based greases. Carbohydrate Polymers.DOI
  114. Shi-Fan Li, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2022). Molecular dynamics simulation on performance modulation of graphene‐modified polyethylene during friction process. Polymers for Advanced Technologies.DOI
  115. Zhongzhi Liu, Zhi-Wei Guo, Xiang Rao, Yi-Cong Xu, C. Sheng, Chengqing Yuan (2022). A comprehensive review on the material performance affected by gaseous alternative fuels in internal combustion engines. Engineering Failure Analysis.DOI
  116. Chuanbo Liu, Shu-Tian Liu, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2022). The Reduction in the Deformation of HDPE Composites Using Self-Lubricating Fillers in an Aqueous Environment. Polymers.DOI
  117. Yan Zhang, Chengqing Yuan (2021). Effects of vibration on output characteristics of shipboard PV modules. Regional Studies In Marine Science, Vol. 47.DOI
  118. 林羽东,郭智威,袁成清(2021). 钢背UHMWPE纤维织物复合材料的摩擦学性能分析. 《中国表面工程》.
  119. 张彦,袁成清(2021). 基于专创融合的轮机工程专业学生创新能力培养. 《航海教育研究》.
  120. 孙玉伟,卢明剑,危卫,袁成清,汤旭晶,严新平(2021). 船舶烟气余热S-CO2布雷顿循环发电技术发展分析与评述. 《中国造船》.
  121. 孙玉伟,程凯,袁成清,白秀琴,汤敏(2021). 船舶舵机系统全寿命周期智能化及其理论体系. 《船海工程》.
  122. 何阳,郭智威,吴祖旻,袁成清(2021). 网状表面织构对水润滑轴承摩擦磨损性能的影响. 《润滑与密封》.
  123. 苗子华,郭智威,袁成清(2021). 大型豪华邮轮供水系统设计技术. 《舰船科学技术》.
  124. 王要波,白秀琴,郭智威,袁成清(2021). 大型豪华邮轮细水雾灭火系统设计探究. 《舰船科学技术》.
  125. 李清,孙玉伟,吴健,袁成清,汤旭晶,严新平(2021). 船舶并网光伏电力系统稳定性. 《交通运输工程学报》.DOI
  126. 汤旭晶,刘雄航,孙玉伟,邱爰超,袁成清(2021). 基于超级电容的船用光伏并网系统功率控制. 《中国航海》.
  127. 杨宗澄,贺小燕,白秀琴,袁成清(2021). 灌注液体型防污表面研究进展. 《表面技术》.DOI
  128. 张栗源,董从林,袁成清,吴宇航(2021). 石墨烯/高密度聚乙烯在水润滑条件下的摩擦学性能研究. 《表面技术》.DOI
  129. Xiang-Dong Liang, Z. Guo, Zhe Li, Yi-Kun Qiu, Zhi-Kang Wang, Chengqing Yuan (2021). A Novel Finding of Tribological and Mechanical Linking to Micro‐Convex Texture on Hydrophilic Composites Surface under Water‐Lubricating Conditions. Macromolecular materials and engineering (Print).DOI
  130. Xiang Rao, C. Sheng, Zhi-Wei Guo, Xuecheng Zhang, Hua-Bing Yin, Changkun Xu, Chengqing Yuan (2021). Effects of textured cylinder liner piston ring on performances of diesel engine under hot engine tests.DOI
  131. Zheng Jia, Zhi-Wei Guo, Chengqing Yuan (2021). Effect of Material Hardness on Water Lubrication Performance of Thermoplastic Polyurethane under Sediment Environment. Journal of materials engineering and performance (Print).DOI
  132. Zongrong Yang, Zhi-Wei Guo, Chengqing Yuan, Xiu-Qin Bai (2021). Tribological behaviors of composites reinforced by different functionalized carbon nanotube using molecular dynamic simulation. Wear.DOI
  133. Xiao-Yan He, Tongfang Lou, Pan Cao, Xiu-Qin Bai, Chengqing Yuan, Chun Wang, A. Neville (2021). Experimental and molecular dynamics simulation study of chemically stable superhydrophobic surfaces. Surface & Coatings Technology.DOI
  134. Zhi-Wei Guo, Qi-Ren Huang, Xin Xie, Chengqing Yuan (2021). Effects of spherical-platform texture parameters on the tribological performance of water-lubricated bearings. Wear.DOI
  135. Jinwan Yang, Yuyang Yuan, Ke Li, Tobias Amann, Chun Wang, Chengqing Yuan, A. Neville (2021). Ultralow friction of 5CB liquid crystal on steel surfaces using a 1,3-diketone additive.DOI
  136. Zhong-Xian Xi, Chengqing Yuan, Xiu-Qin Bai, Chun Wang, A. Neville (2021). Preparation of Degradable Superhydrophobic Mg/P/Z/F/H Composite Materials and Their Anticorrosion. Coatings.DOI
  137. Shi-Fan Li, Cong-Lin Dong, Chengqing Yuan, Shu-Tian Liu, Xiu-Qin Bai (2021). Effects of CeO2 nano-particles on anti-aging performance of HDPE polymer during friction. Wear.DOI
  138. Cong-Lin Dong, Yanyan Yang, Chengqing Yuan, Xiu-Qin Bai, Zhiwei Guo (2021). Effects of anisotropy of lignum vitae wood on its tribological performances. Composites Part B: Engineering.DOI
  139. Zu-Min Wu, Zhi-Wei Guo, Chengqing Yuan (2021). Insight into water lubrication performance of polyetheretherketone.DOI
  140. Tongfang Lou, Xiu-Qin Bai, Xiao-Yan He, Ying Yang, Chengqing Yuan (2021). Molecular dynamics simulation of peptide attachment on Al-based surfaces.DOI
  141. Yao Wang, Zhi-Wei Guo, Xiu-Qin Bai, Chengqing Yuan (2021). Effect of weld defects on the mechanical properties of stainless-steel weldments on large cruise ship.DOI
  142. Yuhang Wu, Cong-Lin Dong, Xiu-Qin Bai, Chengqing Yuan (2021). Synergistic effects of ZnO whiskers and MWCNTs on the friction-induced vibration of a polymer. Tribology International.DOI
  143. Chenwei Miao, Zhi-Wei Guo, Chengqing Yuan (2021). Tribological behavior of co-textured cylinder liner-piston ring during running-in. Friction.DOI
  144. Zhen-Xiang Yang, Zhi-Wei Guo, Zongrong Yang, Chao-Bao Wang, Chengqing Yuan (2021). Study on tribological properties of a novel composite by filling microcapsules into UHMWPE matrix for water lubrication.DOI
  145. Chao-Bao Wang, Xiu-Qin Bai, Zhi-Wei Guo, Cong-Lin Dong, Chengqing Yuan (2021). A strategy that combines a hydrogel and graphene oxide to improve the water-lubricated performance of ultrahigh molecular weight polyethylene. Composites. Part A, Applied science and manufacturing.DOI
  146. Zongcheng Yang, Xiao-Yan He, Jiang-Fan Chang, Chengqing Yuan, Xiu-Qin Bai (2021). Facile fabrication of fluorine-free slippery lubricant-infused cerium stearate surfaces for marine antifouling and anticorrosion application. Surface & Coatings Technology.DOI
  147. Zongrong Yang, Zhi-Wei Guo, Chengqing Yuan, Xiu-Qin Bai (2021). Molecular dynamics simulation study of wear-resistant mechanism of UHMWPE composites reinforced by CNTs with different configuration directions.DOI
  148. Hao Zhang, Chengqing Yuan, Zusheng Tan (2021). A novel approach to investigate temperature field evolution of water lubricated stern bearings (WLSBs) under hydrodynamic lubrication.DOI
  149. Cong‐Yi Du, Xiu-Qin Bai, Chengqing Yuan (2021). Fretting Tribocorrosion Behaviors of Marine Mooring Chain Steel 22MnCrNiMo in Artificial Seawater.DOI
  150. Chenwei Miao, Zhi-Wei Guo, Chengqing Yuan (2021). An experimental study on tribological properties and air tightness of co-textured cylinder liner-piston ring on an engine tester. Surface Topography Metrology and Properties.DOI
  151. Yang He, Zhi-Wei Guo, Zu-Min Wu, Chengqing Yuan (2021). Effect of polyester fiber orientation on the tribological properties of ultrahigh molecular weight polyethylene composites for water lubrication.DOI
  152. Yuhang Wu, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Liyuan Zhang, Ye Tian (2021). MWCNTs filled high-density polyethylene composites to improve tribological performance. Wear.DOI
  153. Yudong Lin, Zhi-Wei Guo, Chengqing Yuan (2021). Effects of solid lubricants on the tribological behavior of steel‐backed UHMWPE fabric composites. Journal of Applied Polymer Science.DOI
  154. Chao-Bao Wang, Xiu-Qin Bai, Zhi-Wei Guo, Cong-Lin Dong, Chengqing Yuan (2021). Friction and wear behaviours of polyacrylamide hydrogel microsphere/UHMWPE composite under water lubrication. Wear.DOI
  155. Shu-Tian Liu, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Ye Tian, Guo-Liang Zhang (2021). A new polyimide matrix composite to improve friction-induced chatter performance through reducing fluctuation in friction force. Composites Part B: Engineering.DOI
  156. D. Hu, Zhi-Wei Guo, T. Jun, Chengqing Yuan (2021). A Novel Hydrophilic PVA Fiber Reinforced Thermoplastic Polyurethane Materials for Water-lubricated Stern Bearing. Fibers And Polymers.DOI
  157. Xiao-Yan He, Tongfang Lou, Zongcheng Yang, Xiu-Qin Bai, Chengqing Yuan, Chun Wang, A. Neville (2021). Lubricant-infused titania surfaces with high underwater transparency for antifouling applications: A combined experimental and molecular dynamics study.DOI
  158. Qi-Ren Huang, Zhi-Wei Guo, Zu-Min Wu, Chengqing Yuan (2021). Insight into the tribological performance of polyurethane composites under high temperature water lubrication. Tribology International.DOI
  159. K. Ma, Zhi-Wei Guo, Chengqing Yuan (2021). Insight into friction and lubrication performances of surface-textured cylinder liners and piston rings. International Journal of Engine Research.DOI
  160. Liyuan Zhang, Chengqing Yuan, Cong-Lin Dong, Yuhang Wu, Xiu-Qin Bai (2021). Friction-induced vibration and noise behaviors of a composite material modified by graphene nano-sheets. Wear.DOI
  161. 杨振祥,郭智威,袁成清(2020). 石墨微胶囊改性超高分子量聚乙烯舰船水润滑尾轴承复合材料的摩擦学性能. 《兵工学报》.
  162. 张彦,王恒涛,杨瑞,袁成清(2020). 无人航行器动力及其推进系统的研究现状与展望. 《中国航海》.
  163. 张晗,白秀琴,贺小燕,袁成清(2020). 船用Q235碳钢的海洋微藻附着诱导微生物腐蚀特性. 《机械工程材料》.
  164. 张彦,贺卓,王恒涛,李慧媛,袁成清(2020). 新能源在无人海洋航行器上的应用现状与展望. 《中国造船》.
  165. 缪晨炜,郭智威,袁成清,许昌,盛晨兴(2020). 缸套-活塞环织构化耦合机理及减摩性能研究. 《表面技术》.DOI
  166. 张豪,谭祖胜,袁成清(2020). 船舶水润滑尾轴承结构设计研究进展. 《润滑与密封》.
  167. 毛世聪,汤旭晶,汪恬,李军,袁成清(2020). 基于模糊-粒子群算法的舰船主锅炉燃烧控制. 《中国航海》.
  168. 董硕,贺小燕,白秀琴,袁成清(2020). DH36钢在需钠弧菌、芽孢杆菌以及混菌腐蚀体系中的腐蚀行为. 《表面技术》.DOI
  169. Xiang Ding, Yan Huang, Chengqing Yuan, Z. Ding (2020). Deposition and cavitation erosion behavior of multimodal WC-10Co4Cr coatings sprayed by HVOF. Surface & Coatings Technology.DOI
  170. Han Zhang, Xiao-Yan He, Y. Hua, Xiu-Qin Bai, Chengqing Yuan (2020). Corrosion behaviors of carbon steel induced by life activities of Phaeodactylum tricornutum in a marine environment. Materials and Corrosion.DOI
  171. Chao-Bao Wang, Xiu-Qin Bai, Cong-Lin Dong, Zhi-Wei Guo, Chengqing Yuan, A. Neville (2020). Designing soft/hard double network hydrogel microsphere/UHMWPE composites to promote water lubrication performance. Friction.DOI
  172. Xin Xie, Zhi-Wei Guo, Chengqing Yuan (2020). Investigating the water lubrication characteristics of sisal fiber reinforced ultrahigh ‐molecular‐weight polyethylene material.DOI
  173. J. Liu, Tongzhou Chen, Chengqing Yuan, Xiu-Qin Bai (2020). Performance Analysis of Cavitation Erosion Resistance and Corrosion Behavior of HVOF-Sprayed WC-10Co-4Cr, WC-12Co, and Cr3C2-NiCr Coatings. Journal of thermal spray technology (Print).DOI
  174. Ke Li, Jinming Jiang, Tobias Amann, Yuyang Yuan, Chun Wang, Chengqing Yuan, A. Neville (2020). Evaluation of 1,3-diketone as a novel friction modifier for lubricating oils. Wear.DOI
  175. Pan Cao, Ke-Wei Liu, Xiao-Dan Liu, Wei Sun, Duo-Li Wu, Chengqing Yuan, Xiu-Qin Bai, Chao Zhang (2020). Antibacterial properties of Magainin II peptide onto 304 stainless steel surfaces: A comparison study of two dopamine modification methods. Colloids and Surfaces B: Biointerfaces.DOI
  176. Tongfang Lou, Xiu-Qin Bai, Xiao-Yan He, Chengqing Yuan (2020). Antifouling performance analysis of peptide-modified glass microstructural surfaces.DOI
  177. Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Ye Tian (2020). A novel approach to reduce deformation behaviors of HDPE polymer during friction.DOI
  178. Feng Tian, Xiao-Yan He, Xiu-Qin Bai, Chengqing Yuan (2020). Electrochemical corrosion behaviors and mechanism of carbon steel in the presence of acid-producing bacterium Citrobacter farmeri in artificial seawater.DOI
  179. Yan Huang, Xiang Ding, Chengqing Yuan, Zhongquan Yu, Z. Ding (2020). Slurry erosion behaviour and mechanism of HVOF sprayed micro-nano structured WC-CoCr coatings in NaCl medium.DOI
  180. X. Liang, Zhi-Wei Guo, T. Jun, Chengqing Yuan (2020). Effect of modified glass fiber on tribological performance of water-lubricated bearing.DOI
  181. X. Liang, Zhi-Wei Guo, Jun Tian, Chengqing Yuan (2020). Development of modified polyacrylonitrile fibers for improving tribological performance characteristics of thermoplastic polyurethane material in water‐lubricated sliding bearings.DOI
  182. Pan Cao, Chong-Wei Du, Xiao-Yan He, Chao Zhang, Chengqing Yuan (2020). Modification of a derived antimicrobial peptide on steel surface for marine bacterial resistance.DOI
  183. Shaoli Jiang, Chengqing Yuan, J. Wong (2020). Effectiveness of glycerol-monooleate in high-performance polymer tribo-systems.DOI
  184. W. Zhan, Sheng-Peng Zhan, H. Duan, Xin-Xiang Li, Jian Li, Bing-Xue Cheng, Chengqing Yuan (2020). The thermal oxidation mechanism of TMPTO with antioxidants investigated by ReaxFF MD. Industrial Lubrication and Tribology.DOI
  185. Zongcheng Yang, Xiao-Yan He, Jiang-Fan Chang, Xiu-Qin Bai, Pan Cao, Chengqing Yuan (2020). Fabrication of biomimetic slippery liquid‐infused porous surface on 5086 aluminum alloy with excellent antifouling performance. Surface and Interface Analysis.DOI
  186. Jiang-Fan Chang, Xiao-Yan He, Xiu-Qin Bai, Chengqing Yuan (2020). The impact of hydrodynamic shear force on adhesion morphology and biofilm conformation of Bacillus sp.DOI
  187. Zhi-Tao Cui, Zhi-Wei Guo, Chengqing Yuan (2020). Influence of different rhombic surface textures on the tribological performance of water-lubricated bearings.DOI
  188. Xiao-Yan He, Feng Tian, Xiu-Qin Bai, Chengqing Yuan, Chun Wang, A. Neville (2020). Biomimetic lubricant-infused titania nanoparticle surfaces via layer-by-layer deposition to control biofouling. Applications of Surface Science.DOI
  189. Tobias Amann, F. Gatti, Ke Li, Yakub Demirel, A. Kailer, Hao Feng, Chengqing Yuan (2020). Investigation of ionic liquids with and without graphene as lubricant additive for metal/metal and metal/PEEK contacts over a wide temperature range. Lubrication Science.DOI
  190. Xiao-Yan He, Feng Tian, Jiang-Fan Chang, Xiu-Qin Bai, Chengqing Yuan, Chun Wang, A. Neville (2020). Haloperoxidase Mimicry by CeO2–x Nanorods of Different Aspect Ratios for Antibacterial Performance.DOI
  191. 麻春英,袁成清,肖劲飞(2019). 生物肽不同结构肽链对生物修饰金属材料疏水性能的影响. 《表面技术》.DOI
  192. 胡东,郭智威,袁成清(2019). 泥沙颗粒对UHMWPE材料水润滑性能的影响规律. 《船舶工程》.
  193. 贾郑铭,郭智威,李永清,朱礼宝,袁成清(2019). 热老化对热塑性聚氨酯水润滑轴承材料的性能影响. 《船舶工程》.DOI
  194. 李秉坤,袁成清,孙玉伟,汤旭晶,卢明剑(2019). 多种热力循环在船舶热能发电系统中的应用. 《船舶工程》.DOI
  195. 吴芮,严新平,孙玉伟,卢明剑,袁成清,汤旭晶(2019). 船舶烟气S-CO2布雷顿循环稳态热力学优化. 《中国航海》.
  196. 麻凯,袁成清,郭智威,杨超振(2019). 双螺纹凹槽织构对缸套-活塞环摩擦磨损性能的影响. 《内燃机工程》.DOI
  197. 缪晨炜,郭智威,袁成清(2019). 仿生多尺度沟槽织构对表面摩擦性能的影响. 《中国表面工程》.
  198. Cong-Lin Dong, Chengqing Yuan, Aijie Xu, Xiu-Qin Bai, Yu Tian (2019). Rippled Polymer Surface Generated by Stick-Slip Friction. Langmuir.DOI
  199. Xiang Rao, C. Sheng, Zhi-Wei Guo, Chengqing Yuan (2019). Effects of thread groove width in cylinder liner surface on performances of diesel engine. Wear.DOI
  200. Xiang Rao, C. Sheng, Zhi-Wei Guo, Chengqing Yuan (2019). Influence of Surface Groove Width on Tribological Performance for Cylinder Liner–Piston Ring Components. Tribology Transactions.DOI
  201. Cong-Lin Dong, Ji-Liang Mo, Chengqing Yuan, Xiu-Qin Bai, Yu Tian (2019). Vibration and Noise Behaviors During Stick–Slip Friction. Tribology letter.DOI
  202. Zongrong Yang, Zhi-Wei Guo, Chengqing Yuan (2019). Tribological behavior of polymer composites functionalized with various microcapsule core materials. Wear.DOI
  203. Jiazhi Miao, Yong-Qing Li, Xiang Rao, Li-Bao Zhu, Zhi-Wei Guo, Chengqing Yuan (2019). Effects of different surface grooved cylinder liner on the tribological performance for cylinder liner-piston ring components. Industrial Lubrication and Tribology.DOI
  204. Xiao-Yan He, Feng Tian, Xiu-Qin Bai, Chengqing Yuan (2019). Role of trapped air and lubricant in the interactions between fouling and SiO2 nanoparticle surfaces. Colloids and Surfaces B: Biointerfaces.DOI
  205. Zu-Min Wu, Zhi-Wei Guo, Chengqing Yuan (2019). Influence of polyethylene wax on wear resistance for polyurethane composite material under low speed water-lubricated conditions. Wear.DOI
  206. Zhi-Wei Guo, Xin Xie, Chengqing Yuan, Xiu-Qin Bai (2019). Study on influence of micro convex textures on tribological performances of UHMWPE material under the water-lubricated conditions. Wear.DOI
  207. Ji Liu, Xiu-Qin Bai, Tongzhou Chen, Chengqing Yuan (2019). Effects of Cobalt Content on the Microstructure, Mechanical Properties and Cavitation Erosion Resistance of HVOF Sprayed Coatings. Coatings.DOI
  208. Xiao-Yan He, Pan Cao, Feng Tian, Xiu-Qin Bai, Chengqing Yuan (2019). Autoclaving-induced in-situ grown hierarchical structures for construction of superhydrophobic surfaces: A new route to fabricate antifouling coatings. Surface & Coatings Technology.DOI
  209. Shumin Zhang, Chenhui Zhang, Xin-Chun Chen, Ke Li, Jinming Jiang, Chengqing Yuan, Jian-Bin Luo (2019). XPS and ToF-SIMS analysis of the tribochemical absorbed films on steel surfaces lubricated with diketone. Tribology International.DOI
  210. Shaoli Jiang, Chengqing Yuan, Zhi-Wei Guo, Xiu-Qin Bai (2019). Effect of crosslink on tribological performance of polyurethane bearing material. Tribology International.DOI
  211. Yuhang Wu, Xiu-Qin Bai, Chengqing Yuan, Cong-Lin Dong, Liyuan Zhang, Shu-Tian Liu (2019). Effects of Typical Physical Properties on Tribological Behaviors of Three Kinds of Polymer Materials for Water-Lubricated Bearings. Tribology Transactions.DOI
  212. Binying Hu, Xiu-Qin Bai, Yi-Feng Fu, Chengqing Yuan (2019). Drag Reduction Performance Analysis of Chlamys nobilis Ribbed Surface. Marine Technology Society journal.DOI
  213. Pan Cao, Zhimin Cao, Chengqing Yuan (2019). Stainless steel coated by Cu NPs via dopamine coupling for antifouling application. Surface and Interface Analysis.DOI
  214. Xiao-Yan He, Xiu-Qin Bai, Chengqing Yuan (2019). Construction of superhydrophobic surfaces for antifouling and drag reduction applications. International Conference on Transportation Information and Safety.DOI
  215. Zongcheng Yang, Xiu-Qin Bai, Xiao-Yan He, Chengqing Yuan (2019). Study on Biomimetic Antifouling Surface Preparation based on Surface Microstructure of Crabs. International Conference on Transportation Information and Safety.DOI
  216. Chao-Bao Wang, Xiu-Qin Bai, Cong-Lin Dong, Zhi-Wei Guo, Chengqing Yuan (2019). Friction properties of polyacrylamide hydrogel particle/HDPE composite under water lubrication. Polymer.DOI
  217. Zongrong Yang, Zhi-Wei Guo, Chengqing Yuan (2019). Effects of MoS2 microencapsulation on the tribological properties of a composite material in a water-lubricated condition. Wear.DOI
  218. Tie Chang, Zhi-Wei Guo, Chengqing Yuan (2019). Study on influence of Koch snowflake surface texture on tribological performance for marine water-lubricated bearings. Tribology International.DOI
  219. D. Hu, Zhi-Wei Guo, Xin Xie, Chengqing Yuan (2019). Effect of spherical-convex surface texture on tribological performance of water-lubricated bearing. Tribology International.DOI
  220. Ke Li, Xiao Zhang, Chen Du, Jinwan Yang, Bolang Wu, Zhi-Wei Guo, Cong-Lin Dong, Ning Lin, Chengqing Yuan (2019). Friction reduction and viscosity modification of cellulose nanocrystals as biolubricant additives in polyalphaolefin oil. Carbohydrate Polymers.DOI
  221. Chong-Wei Du, Xiao-Yan He, Feng Tian, Xiu-Qin Bai, Chengqing Yuan (2019). Preparation of Superhydrophobic Steel Surfaces with Chemical Stability and Corrosion. Coatings.DOI
  222. Xiao-Yan He, Pan Cao, Feng Tian, Xiu-Qin Bai, Chengqing Yuan (2019). Infused configurations induced by structures influence stability and antifouling performance of biomimetic lubricant-infused surfaces. Surface & Coatings Technology.DOI
  223. Tie Chang, Chengqing Yuan, Zhi-Wei Guo (2019). Tribological behavior of aged UHMWPE under water-lubricated condition. Tribology International.DOI
  224. Shu-Tian Liu, Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai (2019). Study of the synergistic effects of fiber orientation, fiber phase and resin phase in a fiber-reinforced composite material on its tribological properties. Wear.DOI
  225. 刘书天,董从林,袁成清,杨志勇,吴宇航(2018). 三种典型船舶轴承复合材料的物理性能对摩擦学行为的影响研究. 《摩擦学学报(中英文)》.
  226. 江仁埔,郭智威,饶响,袁成清(2018). 表面织构对缸套-活塞环摩擦学性能的影响. 《内燃机学报》.
  227. 邱爰超,袁成清,孙玉伟,汤旭晶,严新平(2018). 光伏渗透率对船舶光伏系统电能质量的影响. 《哈尔滨工程大学学报》.
  228. 孙玉伟,胡克容,严新平,汤旭晶,袁成清,潘鹏程(2018). 新能源船舶混合储能系统关键技术问题综述. 《中国造船》.
  229. 袁成清,潘鹏程,孙玉伟,严新平,张彦,汤旭晶(2018). 基于集成高效热能发电系统的船舶Attained EEDI及燃油消耗量分析. 《中国造船》.
  230. 黄武,张晓东,汤旭晶,汪恬,袁成清(2018). 舰船汽轮主机转速的模糊自适应PID控制. 《船舶工程》.
  231. 田丰,白秀琴,贺小燕,袁成清(2018). 海洋环境下金属材料微生物腐蚀研究进展. 《表面技术》.
  232. 江仁埔,郭智威,袁成清(2018). 基于射线技术的内燃机缸套油膜厚度可监测性. 《仪表技术与传感器》.
  233. Xiang Ding, Xu Cheng, Xiang Yu, Chao Li, Chengqing Yuan, Z. Ding (2018). Structure and cavitation erosion behavior of HVOF sprayed multi-dimensional WC–10Co4Cr coating.DOI
  234. Xiao-Yan He, Yi Liu, Xiu-Qin Bai, Chengqing Yuan, Hua Li (2018). Alginate/albumin in incubation solution mediates the adhesion and biofilm formation of typical marine bacteria and algae. Biochemical engineering journal.DOI
  235. Pan Cao, Xiao-Yan He, Jinfei Xiao, Chengqing Yuan, Xiu-Qin Bai (2018). Covalent bonding of AgNPs to 304 stainless steel by reduction in situ for antifouling applications. Applications of Surface Science.DOI
  236. Xiu-Qin Bai, Jiang-Fan Chang, Xiao-Yan He, Chengqing Yuan (2018). Study on Assessment Approach of Antimicrobial and Antifouling Performance for Marine Antifouling Coating.
  237. Pan Cao, Ying Yang, F. Uche, S. Hart, Chengqing Yuan, Wen-Wu Li (2018). Modification of metal surfaces using TCM-derived cyclotides: an antibacterial and antibiofilm study.DOI
  238. Xiang Ding, Xu Cheng, Jin Shi, C. Li, Chengqing Yuan, Z. Ding (2018). Influence of WC size and HVOF process on erosion wear performance of WC-10Co4Cr coatings.DOI
  239. Zhi-Wei Guo, Chengqing Yuan, Xiu-Qin Bai, Xin-Ping Yan (2018). Experimental Study on Wear Performance and Oil Film Characteristics of Surface Textured Cylinder Liner in Marine Diesel Engine. Chinese Journal of Mechanical Engineering.DOI
  240. Chunying Ma, Chengqing Yuan, Pan Cao (2018). A Facile Method to Prepare a Hydrophilic/Hydrophobic Metal Surface by Peptide. Materials.DOI
  241. Shaoli Jiang, Zhiwei Guo, Chengqing Yuan, Ai-Xue Liu, Xiu-Qin Bai (2018). Study on the tribological properties of modified polyurethane material for water-lubricated stern bearing.DOI
  242. Pan Cao, Ying Yang, F. Uche, S. Hart, Wen-Wu Li, Chengqing Yuan (2018). Coupling Plant-Derived Cyclotides to Metal Surfaces: An Antibacterial and Antibiofilm Study. International Journal of Molecular Sciences.DOI
  243. Chengqing Yuan, Xuelei Yao, Xiu-Qin Bai (2018). Influence of Surface Roughness Changes Caused by Fouling on Ship Resistance Based on CFD Analysis.
  244. Yu-Wei Sun, Xin-Ping Yan, Chengqing Yuan, Xiu-Qin Bai (2018). Insight into tribological problems of green ship and corresponding research progresses. Friction.DOI
  245. Xiao-Yan He, Xin-Kun Suo, Xiu-Qin Bai, Chengqing Yuan, Hua Li (2018). Functionalizing aluminum substrata by quaternary ammonium for antifouling performances.DOI
  246. Pan Cao, Chengqing Yuan, Jinfei Xiao, Xiao-Yan He, Xiu-Qin Bai (2018). A biofilm resistance surface yielded by grafting of antimicrobial peptides on stainless steel surface.DOI
  247. Xiang Ding, Du Ke, Chengqing Yuan, Z. Ding, Xu Cheng (2018). Microstructure and Cavitation Erosion Resistance of HVOF Deposited WC-Co Coatings with Different Sized WC. Coatings.DOI
  248. Pan Cao, Xiao-Yan He, Jinfei Xiao, Chengqing Yuan, Xiu-Qin Bai (2018). Peptide‐modified stainless steel with resistance capacity of Staphylococcus aureus biofilm formation. Surface and Interface Analysis.DOI
  249. Ke Li, Shumin Zhang, Deshuang Liu, Tobias Amann, Chenhui Zhang, Chengqing Yuan, Jian-Bin Luo (2018). Superlubricity of 1,3-diketone based on autonomous viscosity control at various velocities. Tribology International.DOI
  250. 苗嘉智,郭智威,袁成清(2017). 内燃机缸套-活塞环微织构设计与研究进展. 《润滑与密封》.
  251. 苗嘉智,郭智威,袁成清(2017). 表面织构对内燃机缸套-活塞环系统摩擦性能的影响. 《摩擦学学报(中英文)》.
  252. 饶响,盛晨兴,郭智威,袁成清(2017). 小型船舶柴油机缸套表面环形槽结构的摩擦磨损性能试验. 《船舶工程》.
  253. 杨宗榕,郭智威,袁成清(2017). 愈创树脂型水润滑尾轴承材料的耐摩特性及影响规律. 《船舶工程》.
  254. 常江凡,白秀琴,袁成清(2017). 船用防污涂料浅海浸泡试验防污性能评价方法. 《船舶工程》.
  255. 曹攀,杨膺,袁成清,肖劲飞,白秀琴(2017). 基于生物修饰的304不锈钢表面抗菌性能. 《中国表面工程》.
  256. 严新平,梁兴鑫,刘正林,周新聪,袁成清,欧阳武(2017). 船舶水润滑尾轴承服役性能研究及其进展. 《中国造船》.
  257. 常铁,高金军,郭智威,袁成清(2017). 改性PBT复合材料在水润滑条件下的摩擦学性能研究. 《润滑与密封》.
  258. 肖劲飞,袁成清,曹攀,白秀琴(2017). 基于低表面能设计的船体表面绿色防污研究进展. 《船舶工程》.
  259. 孙承亮,赵江滨,崔天宇,袁成清,周建林(2017). AUV动力电池技术的应用现状及展望. 《船舶工程》.
  260. Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, H. Qin, Xin-Ping Yan (2017). Investigating relationship between deformation behaviours and stick-slip phenomena of polymer material.DOI
  261. Chengqing Yuan, Zhi-Wei Guo, Tao Wei, Cong-Lin Dong, Xiu-Qin Bai (2017). Effects of different grain sized sands on wear behaviours of NBR/casting copper alloys.DOI
  262. Xiang Ding, Xu Cheng, Chengqing Yuan, Jin Shi, Z. Ding (2017). Structure of Micro-nano WC-10Co4Cr Coating and Cavitation Erosion Resistance in NaCl Solution.DOI
  263. Zhi-Wei Guo, Chengqing Yuan, Ai-Xue Liu, Jiang Song (2017). Study on tribological properties of novel biomimetic material for water-lubricated stern tube bearing.DOI
  264. Xiu-Qin Bai, W. Xiong, Chengqing Yuan (2017). Features Description of Shell Surface Microstructure for Marine Antifouling Study.
  265. Chengqing Yuan, Pan Cao, Xiu-Qin Bai (2017). Study on Antimicrobial Surface Design Using Biological Modification Attempting for Marine Antifouling.
  266. Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Jian Li, H. Qin, Xin-Ping Yan (2017). Coupling mechanism between wear and oxidation processes of 304 stainless steel in hydrogen peroxide environments. Scientific Reports.DOI
  267. Xiang Ding, Xu Cheng, C. Li, Xiang Yu, Z. Ding, Chengqing Yuan (2017). Microstructure and performance of multi-dimensional WC-CoCr coating sprayed by HVOF. The International Journal of Advanced Manufacturing Technology.DOI
  268. Yi-Feng Fu, Chengqing Yuan, Xiu-Qin Bai, Tao Li (2017). Study on Drag Reduction Performance of Antifouling Ribbed Surfaces.DOI
  269. Yi-Feng Fu, Chengqing Yuan, Xiu-Qin Bai (2017). Marine drag reduction of shark skin inspired riblet surfaces.DOI
  270. Yi-Feng Fu, Chengqing Yuan, Xiu-Qin Bai (2017). A numerical study of drag reduction of superhydrophobic surfaces in shipping industry. International Conference on Transportation Information and Safety.DOI
  271. Cong-Lin Dong, Lichun Shi, Lvzhou Li, Xiu-Qin Bai, Chengqing Yuan, Yu Tian (2017). Stick-slip behaviours of water lubrication polymer materials under low speed conditions.DOI
  272. 袁成清,白秀琴,郭智威,严新平(2016). 基于摩擦学的船舶动力系统能效提升研究. 《船海工程》.
  273. 白秀琴,袁成清,严新平(2016). 基于表面能协同调控的材料表面防污性能设计. 《船海工程》.
  274. 严新平,孙玉伟,袁成清(2016). 太阳能船舶技术应用现状及展望. 《船海工程》.
  275. 常江凡,白秀琴,袁成清(2016). 武汉新港至洋山港江海直达船海洋污损生物附着分析. 《船海工程》.
  276. 杨宗澄,白秀琴,姜欢,袁成清(2016). 船体表面海洋污损生物附着规律分析. 《船舶工程》.
  277. 宋昕,袁成清(2016). 水流速度对内河船舶营运能效影响分析. 《船舶工程》.
  278. 孙玉伟,严新平,袁成清,汤旭晶(2016). 离网型太阳能光伏系统在内河滚装船上的应用. 《船舶工程》.
  279. 刘晓,汤旭晶,孙玉伟,袁成清(2016). 船用双闭环重复控制光伏离网逆变器研究. 《船舶工程》.
  280. Zongcheng Yang, Xiu-Qin Bai, Huan Jiang, Cheng-Qing Yuan(2016). 船体表面における海洋汚損生物付着法則の分析【JST・京大機械翻訳】.
  281. Zongcheng Yang, Xiu-Qin Bai, Hua Jiang, Cheng-Qing Yuan (2016). Analysis of Biofouling Occurrence Trends on Ship Hull Surface.
  282. Xiu-Qin Bai, Xuan Zhang, Chengqing Yuan (2016). Numerical Analysis of Drag Reduction Performance of Different Shaped Riblet Surfaces.DOI
  283. Cong-Lin Dong, Chengqing Yuan, Lei Wang, Wei Liu, Xiu-Qin Bai, Xin-Ping Yan (2016). Tribological Properties of Water-lubricated Rubber Materials after Modification by MoS2 Nanoparticles. Scientific Reports.DOI
  284. Xing-Xin Liang, Zheng-Lin Liu, Chengqing Yuan, Ouyang Wu, Xin-Ping Yan (2016). Design and Performance Analysis of a Water Lubricated Tilting Pad Thrust Bearing.
  285. 赵琳珊,白秀琴,付宜风,袁成清(2015). 船用梯形微沟槽表面减阻效应的仿真分析与实验验证. 《船舶工程》.
  286. 张彦,袁成清,张天,孙玉伟(2015). 海洋环境下太阳能电池玻璃表面清洁方案. 《船海工程》.
  287. 姚雪蕾,袁成清,付宜风,白秀琴(2015). 管道内壁粗糙度对沿程阻力影响的FLUENT数值模拟分析. 《船海工程》.
  288. 王雄,白秀琴,袁成清(2015). 基于仿生的非光滑表面防污减阻技术发展现状分析. 《船舶工程》.
  289. 盛晨兴,张月雷,袁成清(2015). 可监测性设计理论在船舶动力机械系统设计中的应用. 《船舶工程》.
  290. 齐俊麟,潘诚,袁成清,江蓓,张杰,梁锴(2015). 山区河流水上设施新能源复合供电应用. 《船海工程》.
  291. Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Xin-Ping Yan, Shuhua Mao (2015). Reliability Evaluation of Marine Propulsion Shaft Based on Stress-Strength Interference Theory.DOI
  292. Qian-Wen Huang, Cong Zhang, Yong Jin, Chengqing Yuan, Xin-Ping Yan (2015). Vibration analysis of marine propulsion shafting by the coupled finite element method. Journal of Vibroengineering.DOI
  293. Lei-Kang Ge, Chengqing Yuan, Zhi-Wei Guo, Xin-Ping Yan (2015). Prediction and evaluation of cracks on thrust shaft. International Conference on Transportation Information and Safety.DOI
  294. Yu-Peng Yuan, Xin-Ping Yan, Kai Wang, Chengqing Yuan (2015). A new remote intelligent diagnosis system for marine diesel engines based on an improved multi-kernel algorithm.DOI
  295. Pan Cao, Ting-Ting Zhou, Xiu-Qin Bai, Chengqing Yuan (2015). Research Progress on Corrosion and Protection in Deep-sea Environment.DOI
  296. Ting-Ting Zhou, Chengqing Yuan, Pan Cao, Xue-Jun Wang, Cong-Lin Dong (2015). Numerical Simulation Analysis of Fluid Erosion Corrosion of Injection Nozzle for Diesel Engine.DOI
  297. Pan Cao, Chengqing Yuan, C.-Y. Ma, Ying Yang, Xiu-Qin Bai, Xing-jun Wang, Xiao-Ning Ren, Hong-Yao Xie, Xin-Ping Yan (2015). Preparation and analysis of a new bioorganic metallic material.DOI
  298. Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Ying Yang, Xin-Ping Yan (2015). Study on wear behaviours for NBR/stainless steel under sand water-lubricated conditions.DOI
  299. Zhengming Zou, Xiu-Qin Bai, Cong-Lin Dong, Chengqing Yuan (2015). Study on influencing factors for wear of water-lubricated rubber stern tube bearing. International Conference on Transportation Information and Safety.DOI
  300. Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Xin-Ping Yan, Zhongxiao Peng (2015). Tribological properties of aged nitrile butadiene rubber under dry sliding conditions.DOI
  301. Yi-Feng Fu, Xiu-Qin Bai, Chengqing Yuan (2015). The synergistic effect of drag reduction and antifouling of bionic jet surface. International Conference on Transportation Information and Safety.DOI
  302. Pan Cao, Chengqing Yuan, Xiu-Qin Bai, Xin-Ping Yan (2015). Reducing surface energy to improve energy efficiency of ships. International Conference on Transportation Information and Safety.DOI
  303. 朱占春,袁成清,孟维文,江蓓(2014). 小型水流能发电装置设计与仿真. 《船海工程》.
  304. 和树海,袁成清,孙玉伟,陈云瑶,严新平(2014). 基于船舶电力系统的光伏并网发电实验平台设计及评价. 《2013年中国造船工程学会优秀学术论文集》.
  305. 麻春英,王雪君,曹攀,白秀琴,谢浩,袁成清(2014). 防生物污损生物肽改性金属材料的研究现状. 《机械工程材料》.
  306. Cong-Lin Dong, Chengqing Yuan, Xiu-Qin Bai, Xin-Ping Yan, Zhongxiao Peng (2014). Study on wear behaviour and wear model of nitrile butadiene rubber under water lubricated conditions.DOI
  307. Zhi-Wei Guo, Chengqing Yuan, Xin-Ping Yan, Zhongxiao Peng (2014). 3D Surface Characterizations of Wear Particles Generated from Lubricated Regular Concave Cylinder Liners. Tribology letter.DOI
  308. 陈云瑶,袁成清,和树海(2013). 基于恒压插值法的光伏发电系统最大功率跟踪. 《船海工程》.
  309. 袁成清,张彦,白秀琴,孙玉伟,严新平(2013). 船舶非碳能源利用模式和能效提升的协同作用. 《船舶工程》.
  310. 孙玉伟,严新平,袁成清,汤旭晶,徐立(2013). 基于多层面同构的船舶智能电网理论体系研究. 《船舶工程》.
  311. 林杰,袁成清,孙玉伟,严新平(2013). 船用太阳能电池板天线效应对VHF通信频段的影响. 《船海工程》.
  312. 张璇,白秀琴,袁成清,严新平(2013). 防污贝壳表面纹理特征减阻效应仿真分析. 《中国造船》.
  313. 牟明磊,盖力康,郭智威,袁成清(2013). 基于有限元分析的轴系裂纹故障缓解初步研究. 《武汉理工大学学报》.
  314. 张彦,袁成清,严新平(2013). 基于船岸一体的小型游船光伏系统的构建. 《船舶工程》.
  315. 牟明磊,王健松,郭智威,袁成清(2013). 径向加载模拟工况下柴油机机身振动特性分析. 《武汉理工大学学报》.
  316. Chengqing Yuan (2013). Research Status and Advances on Tribological Study of Materials under Ocean Environment.
  317. Zhixiong Li, Xin-Ping Yan, Z. Tian, Chengqing Yuan, Zhongxiao Peng, Li Li (2013). Blind vibration component separation and nonlinear feature extraction applied to the nonstationary vibration signals for the gearbox multi-fault diagnosis.DOI
  318. Zhi-Wei Guo, Chengqing Yuan, Zhixiong Li, Zhongxiao Peng, Xin-Ping Yan (2013). Marine CM: Condition identification of the cylinder liner-piston ring in a marine diesel engine using bispectrum analysis and artificial neural networks.DOI
  319. Cong-Lin Dong, Chengqing Yuan, Jian Li, Xin-Ping Yan (2013). Assessment model for tribological property of ceramic/stainless steel rubbing pairs in H2O2 solution.DOI
  320. Chengqing Yuan (2013). Vibration Characteristics Analysis of Diesel Engine Body on Radial Load Simulation Condition.
  321. Xin-Ping Yan, Yu-Wei Sun, Chengqing Yuan, Shun-Huai Chen, Li Xu, Xu-Jing Tang, Yuelei Zhang, Yu-Peng Yuan, Yan Zhang (2013). Kilowatt-level ship energy system test platform based on composite energy combined grid power generation.
  322. Xin-Ping Yan, Zhixiong Li, Chengqing Yuan, Z. Guo, Z. Tian, C. Sheng (2013). On-line Condition Monitoring and Remote Fault Diagnosis for Marine Diesel Engines Using Tribological Information.
  323. Zhi-Wei Guo, Chengqing Yuan, Peng Liu, Zhongxiao Peng, Xin-Ping Yan (2013). Study on Influence of Cylinder Liner Surface Texture on Lubrication Performance for Cylinder Liner–Piston Ring Components. Tribology letter.DOI
  324. Cong-Lin Dong, Chengqing Yuan, Zheng-Lin Liu, Xin-Ping Yan (2013). Marine Propulsion System Reliability Research Based on Fault Tree Analysis.
  325. Zhixiong Li, Xin-Ping Yan, Li Qin, Chengqing Yuan, Zhongxiao Peng (2013). Model Reference Robust Control for Marine Propulsion Systems with Model Uncertainty Caused by Hull Deformation.DOI
  326. Xiu-Qin Bai, G. Xie, H. Fan, Zhongxiao Peng, Chengqing Yuan, Xin-Ping Yan (2013). Study on biomimetic preparation of shell surface microstructure for ship antifouling.DOI
  327. Xin-Ping Yan, Xiu-Qin Bai, Chengqing Yuan (2013). Discussion on Connotation and Research Scopes of Ocean Tribology and Its Research Progress.
  328. Chengqing Yuan (2013). Synergistic Effect of Non-carbon Energy and Energy Efficiency Improvement in Ship.
  329. Chengqing Yuan, Xin-Ping Yan, Zhixiong Li, Yuelei Zhang, C. Sheng, Jiang-Bin Zhao (2013). Remote Fault Diagnosis System for Marine Power Machinery System.DOI
  330. H. Duan, Yong Wu, M. Hua, Chengqing Yuan, Ding Wang, Jie-Song Tu, H. Kou, Jian Li (2013). Tribological properties of AlCoCrFeNiCu high-entropy alloy in hydrogen peroxide solution and in oil lubricant.DOI
  331. 刘鹏,袁成清,郭智威(2012). 缸套微观形貌对缸套-活塞环振动及润滑性能的影响. 《兵工学报》.
  332. Xin-Ping Yan, Shufa He, Yu-Wei Sun, Jie Lin, Xu-Jing Tang, Xiu-Qin Bai, Cong-Lin Dong, Chengqing Yuan, Jiang-Bin Zhao, Yun-Yao Chen (2012). Marine photovoltaic power generation grid-connected experimental platform.
  333. Chengqing Yuan, L. Yu, Jian Li, Xin-Ping Yan (2012). Study on tribological and electrochemistry properties of metal materials in H2O2 solutions. Frontiers of Mechanical Engineering.DOI
  334. Zhixiong Li, Xin-Ping Yan, Zhi-Wei Guo, Peng Liu, Chengqing Yuan, Zhongxiao Peng (2012). A New Intelligent Fusion Method of Multi-Dimensional Sensors and Its Application to Tribo-System Fault Diagnosis of Marine Diesel Engines. Tribology letter.DOI
  335. Zhixiong Li, Xin-Ping Yan, Chengqing Yuan, Zhongxiao Peng (2012). Intelligent fault diagnosis method for marine diesel engines using instantaneous angular speed. Journal of Mechanical Science and Technology.DOI
  336. Zhixiong Li, Xin-Ping Yan, Zhi-Wei Guo, Yuelei Zhang, Chengqing Yuan, Zhongxiao Peng (2012). Condition Monitoring and Fault Diagnosis for Marine Diesel Engines using Information Fusion Techniques.DOI
  337. Xiao-ping Cheng, Huawei Yi, Xiu-Qin Bai, Cheng-Qing Yuan, Haochen Xie (2012). Animal mucus: Barrier effects and adhesion mechanisms.DOI
  338. 刘鹏,袁成清,郭智威(2011). 缸套内表面微观织构对缸套-活塞环润滑性能的影响. 《2011年全国青年摩擦学与表面工程学术会议论文集》.
  339. 严新平,袁成清(2011). 船舶动力系统运用工程的基础理论体系. 《中国造船》.
  340. 严新平,李志雄,袁成清,朱汉华,刘正林(2011). 考虑船体变形耦合作用的船舶推进系统建模与控制. 《船海工程》.
  341. 张月雷,严新平,袁成清,李志雄(2011). 基于协同理论的机械系统可监测性综合优化设计方法. 《青年摩擦学者与“十二五”发展——2011年全国青年摩擦学与表面工程学术会议》.
  342. 郭智威,袁成清,叶枫桦,刘鹏,严新平(2011). 不同缸套表面处理对柴油机振动的影响. 《武汉理工大学学报》.
  343. 白秀琴,袁成清,严新平,刘雪梅(2011). 基于贝壳表面形貌仿生的船舶绿色防污研究. 《武汉理工大学学报》.
  344. Zhixiong Li, Xin-Ping Yan, Chengqing Yuan, Jiang-Bin Zhao, Zhongxiao Peng (2011). Fault detection and diagnosis of a gearbox in marine propulsion systems using bispectrum analysis and artificial neural networks.DOI
  345. Yu-Wei Sun, Xin-Ping Yan, Chengqing Yuan (2011). Research on Evaluation Model for Characteristic of Solar Cell in Simulated Marine Environment Based on Information Fusion.DOI
  346. Yuelei Zhang, Xin-Ping Yan, Chengqing Yuan, Qing-Chao Guo (2011). Study of optimal monitoring point placement for marine power machinery using fault tree theory. 2011 Prognostics and System Health Managment Confernece.DOI
  347. Xin-Ping Yan, Zheng-Lin Liu, Cheng-Qiang Zong, Han-Hua Zhu, Zhixiong Li, Chengqing Yuan, Zhi-Wei Guo (2011). Ship propelling unit and coupling dynamics test stand of ship body.
  348. Peng Liu, Chengqing Yuan, Zhi-Wei Guo (2011). Effects of large process structure of cylinder liner on friction of cylinder liner-piston ring. 2011 Prognostics and System Health Managment Confernece.DOI
  349. Cong-Lin Dong, Chengqing Yuan, Zheng-Lin Liu, Xin-Ping Yan (2011). Study on fatigue life evaluation of water lubricated rubber stern tube bearing. 2011 Prognostics and System Health Managment Confernece.DOI
  350. Zhixiong Li, Xin-Ping Yan, Chengqing Yuan, Zhongxiao Peng, Li Li (2011). Virtual prototype and experimental research on gear multi-fault diagnosis using wavelet-autoregressive model and principal component analysis method.DOI
  351. Chengqing Yuan, J. Li, Cong-Lin Dong, Xin-Ping Yan (2011). Study on tribological properties of ceramics/stainless steel rubbing pairs in hydrogen peroxide solutions.DOI
  352. C. Lei, Zhongxiao Peng, T. Day, Xin-Ping Yan, Xiu-Qin Bai, Chengqing Yuan (2011). Experimental observation of surface morphology effect on crystallization fouling in plate heat exchangers.DOI
  353. Cong-Lin Dong, Chengqing Yuan, Jun Li, Jian Li, Xin-Ping Yan (2011). Study on tribological properties of Al2O3 ceramics/1Cr18Ni9Ti stainless steel rubbing pairs in H2O2 solutions.DOI
  354. Xin-Ping Yan, C. Sheng, Chengqing Yuan, Jiang-Bin Zhao (2011). Remote monitoring system and method.
  355. Zhi-Wei Guo, Chengqing Yuan, Peng Liu, Xin-Ping Yan (2011). Effect of Cylinder Surface Treatment on Diesel Engine Performance.DOI
  356. S. Tomovich, Zhongxiao Peng, Chengqing Yuan, Xin-Ping Yan (2011). Quantitative Surface Characterisation Using Laser Scanning Confocal Microscopy.DOI
  357. Jiang-Bin Zhao, Tie-Jia Shi, Xin-Ping Yan, Chengqing Yuan (2011). A Novel Approach for PC-Based Test and Measurement Applications Development with Autonomous Sensors.DOI
  358. Jie Lin, Chengqing Yuan, Yu-Wei Sun, Liang-Liang Zhao (2011). Study on degradation of optical properties of shipping solar cell cover glass. 2011 Prognostics and System Health Managment Confernece.DOI
  359. Zhi-Wei Guo, Chengqing Yuan, Peng Liu (2011). Expert Weight Allocation for Diesel Engine Condition Identification Based on Entropy Theory and Fuzzy Logic.DOI
  360. Xiu-Qin Bai, Chengqing Yuan, Jun Li (2011). Study on Wear Behaviour of Ceramics/1Cr18Ni9Ti Wear Components in H2O2 Solution.DOI
  361. Chengqing Yuan (2011). Basic Theory for Operational Engineering of Marine Power System.
  362. 魏乔,孙玉伟,袁成清,严新平(2010). 大型远洋运输船舶太阳能光伏系统的构建. 《船海工程》.
  363. 袁成清,黎俊,余丽,李健,严新平(2010). 1Cr18Ni9Ti在H2O2介质中摩擦电化学性能. 《武汉理工大学学报》.
  364. 林杰,袁成清,孙玉伟,严新平(2010). 太阳能电池板在不同类型船舶上的布置优化. 《船海工程》.
  365. 孙玉伟,严新平,袁成清,王亦工(2010). 太阳能光伏系统在远洋船舶应用的经济性分析. 《船海工程》.
  366. 袁成清,赵亮亮,孙玉伟,严新平(2010). 船用太阳能电池可靠性分析. 《船海工程》.
  367. 张月雷,严新平,袁成清(2010). 机械系统可监测性设计探讨. 《船海工程》.
  368. Zhixiong Li, Xin-Ping Yan, Chengqing Yuan, Jiang-Bin Zhao, Zhongxiao Peng (2010). A New Method of Nonlinear Feature Extraction for Multi-Fault Diagnosis of Rotor Systems.DOI
  369. Xin-Ping Yan, Yuelei Zhang, C. Sheng, Chengqing Yuan (2010). Study on remote fault diagnosis system using multi monitoring methods on dredger. Prognostics and System Health Management Conference.DOI
  370. Yuelei Zhang, Xin-Ping Yan, Chengqing Yuan (2010). The research of optimal monitoring point placement for health monitoring of dredger based on analytic hierarchy process. Prognostics and System Health Management Conference.DOI
  371. Zhixiong Li, Xin-Ping Yan, Chengqing Yuan, Zhongxiao Peng (2010). Gear faults diagnosis based on wavelet-AR model and PCA. International Conference on Image Processing and Pattern Recognition in Industrial Engineering.DOI
  372. Zhixiong Li, Xin-Ping Yan, Chengqing Yuan, Li Li (2010). Gear Multi-Faults Diagnosis of a Rotating Machinery Based on Independent Component Analysis and Fuzzy K-Nearest Neighbor.DOI
  373. X. Yan, Chengqing Yuan, Z. Liu, C. Zong, X.-Q. Bai (2010). Study of Simulation Tester for Key Rubbing Pairs in Internal-Combustion Engine.DOI
  374. Chengqing Yuan, Cong-Lin Dong, Liang-Liang Zhao, Xin-Ping Yan (2010). Marine environmental damage effects of solar cell panel. Prognostics and System Health Management Conference.DOI
  375. Zhixiong Li, Xin-Ping Yan, Chengqing Yuan, Jiang-Bin Zhao, Zhongxiao Peng (2010). A Fault Diagnosis Approach for Gears Using Multidimensional Features and Intelligent Classifier.DOI
  376. 袁成清,王志芳,宗成强,张月雷(2009). 基于集对分析的船舶柴油机摩擦学系统状态预测. 《船海工程》.
  377. 袁成清,王志芳,周志红,严新平(2009). 滑动轴承磨损表面与磨粒信息映射模型研究. 《武汉理工大学学报》.
  378. 余丽,袁成清,陈展鹏,李健(2009). 不锈钢在H2O2介质中的磨损性能比较. 《武汉理工大学学报》.
  379. Zhi-Yong Lu, Xin-Ping Yan, C. Sheng, Chengqing Yuan (2009). Wear trend analysis based on ferrograph cover area rates compares with other methods. 2009 IEEE Vehicle Power and Propulsion Conference.DOI
  380. Ji-Hui Wang, Ka-Li Gu, Chengqing Yuan, Xian-Ming Sun, Sheng Hu, Xiaozhong Hu, Jian Li (2009). Study on Surface Passivation Treatment and Tribological Properties of 1Cr18Ni9Ti Stainless Steel in Hydrogen Peroxide.DOI
  381. Xin-Ping Yan, Y.-H. Chen, Angela Li, Chengqing Yuan (2009). Study of Tribological Faults and Their Prevention Approaches in Dredger.DOI
  382. Lei Wang, X.-C. Zhou, Q.-Q. Li, Chengqing Yuan, X.-P. Yan, Y.-H. Chen (2009). Application of Metal Self-Repairing Additives on Cylinder-Piston Ring Rubbing Pairs.DOI
  383. Stephan Ebersbach, Zhongxiao Peng, Chengqing Yuan, Xin-Ping Yan (2009). Machine Condition Monitoring and Remaining Life Prediction Using Integrated Approach.DOI
  384. Xin-Ping Yan, Chengqing Yuan, Xin-Cong Zhou, Xiu-Qin Bai (2009). Study on Condition Characteristics of Tribo-System and Its Description Method.DOI
  385. J.-P. Wu, X.-P. Yan, Z.-M. Jin, Joanne L. Tipper, Chengqing Yuan, X.-C. Zhou (2009). Application of principal component analysis and a fuzzy C-means clustering algorithm to wear debris morphology classification.DOI
  386. Ping Zhong, You-Wei Liao, Chengqing Yuan, Jian Li (2009). Erosion Behaviors of Elastic Polymer Coatings.DOI
  387. Chengqing Yuan, X.-P. Yan, X.-C. Zhou (2008). Effects of Fe powder on sliding wear processes under lubricants with different viscosities.DOI
  388. Chengqing Yuan, Zhongxiao Peng, Xin-Ping Yan, X.-C. Zhou (2008). Surface roughness evolutions in sliding wear process.DOI
  389. 王志芳,严新平,袁成清(2007). 摩擦学系统状态辨识的集对分析方法. 《武汉理工大学学报》.
  390. Chengqing Yuan (2007). Tribo-system Condition Identification Based on Set Pair Analysis.
  391. Chengqing Yuan, Xin-Ping Yan, Zhongxiao Peng (2007). Prediction of surface features of wear components based on surface characteristics of wear debris.DOI
  392. 袁成清,严新平,彭中笑(2006). 基于激光共焦扫描显微镜方法的磨损表面三维数字化描述. 《第六届全国表面工程学术会议暨首届青年表面工程学术论坛论文集》.
  393. 袁成清,严新平,彭中笑(2005). 磨粒三维表面形貌获取技术的研究. 《武汉理工大学学报》.
  394. Chengqing Yuan, Zhongxiao Peng, X.-C. Zhou, Xin-Ping Yan (2005). The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition.DOI
  395. Zhongxiao Peng, A. Green, Chengqing Yuan (2005). The study of wear in a spur gear using wear debris and vibration analysis techniques.
  396. Chengqing Yuan, Zhongxiao Peng, X.-C. Zhou, X.-P. Yan (2005). The study of sliding and rolling wear using wear debris analysis techniques.
  397. Chengqing Yuan, Zhongxiao Peng, X.-C. Zhou, Xin-Ping Yan (2005). The characterization of wear transitions in sliding wear process contaminated with silica and iron powder.DOI
  398. Chengqing Yuan, Zhongxiao Peng, Xin-Ping Yan (2005). Surface characterization using wavelet theory and confocal laser scanning microscopy.DOI
  399. Chengqing Yuan, Zhongxiao Peng, X.-C. Zhou, Xin-Ping Yan (2004). Effects of temperature on sliding wear process under contaminated lubricant test conditions.DOI
  400. Chengqing Yuan, J. Li, Xin-Ping Yan, Zhongxiao Peng (2003). The use of the fractal description to characterize engineering surfaces and wear particles.DOI
  401. 薛俊,李健,高万振,顾卡丽,袁成清,吴伊敏(2002). 超高分子量聚乙烯及其复合材料摩擦/蠕变复合过程初探. 《第七届全国摩擦学大会会议论文集(一)》.
  402. 韦习成,李健,袁成清(2001). 基体表面粗糙度对磁控溅射TiN涂层界面结合力的影响. 《机械工程材料》.
  403. Jian Li, Chengqing Yuan, Meng Hua Meem (2001). A COMPUTER AIDED FRACTAL CALCULATION IN TRIBOLOGY RESEARCH.
  404. 袁成清,李健,顾卡丽,秦襄培,赵源,徐建生(2000). 分形理论在材料科学中的应用. 《第一届国际机械工程学术会议》.
  405. 韦习成,李健,袁成清(1999). 磁控溅射TiN界面结合强度的压痕法测试研究. 《'99摩擦学表面工程学术会议论文集》.
  406. 李健,杨建华,袁成清(1999). 编后语. 《'99摩擦学表面工程学术会议》.
  407. 袁成清,李健,韦习成,周洪澍,贺石中(1999). 图象数字化处理系统在铁谱技术中的应用. 《'99摩擦学表面工程学术会议论文集》.
  408. Zhi-Wei Guo, Chengqing Yuan, Peng Liu. Send Orders of Reprints at Bspsaif@emirates.net.ae Study on Identification Model of Cylinder Liner-piston Ring Using Vibration Analysis Based on Fuzzy C-means Clustering.
  409. Hai-Huan Sun, Xiao-Yan He, Tong Lou, Yu-Han Liu, Zi-Quan Zhou, Zongcheng Yang, Cheng-Qing Yuan, Xiu-Qin Bai. Tannic acid-reinforced zwitterionic double-network hydrogels with enhanced mechanical properties and antifouling performance. Applications of Surface Science.DOI

此主页由公开资料整理,尚未经学者本人认领。