唐爱坤｜江苏大学｜学者主页

2026

《热工过程自动控制》课程教学改革探讨

蔡涛，唐爱坤

《中国电力教育》

DOI

2026

CFD-DEM simulation of liquid-solid two-phase flow characteristics in slender straight pipes

Jiuxuan Xiang, Hongliang Ding, Ke Chen, Aikun Tang, Yi Jin, Kehao Li, Yanlong Guo, Tao Cai

Powder Technology

DOI

2026

Mechanistic study of the regulatory effects of key discharge parameters on plasma-assisted microscale methane combustion

Chenglin Gu, Chang Liu, Ke Chen, Aikun Tang, Tao Cai, Qihao Song

Chemical Engineering Science

DOI

2026

Experimental study on the conversion characteristics and performance enhancement of foam-supported spinel catalysts for low-concentration hydrogen

Aikun Tang, Qian Zhang, Qiang Ni, Aikun Tang, Tao Cai, Han Zhang

Chemical Engineering and Processing - Process Intensification

DOI

2026

A comprehensive review of renewable ammonia combustion applied to micro-gas turbines and micro-thermophotovoltaic systems

Tao Cai, Xian Ma, Zhen Man, Kaiqi Li, Aikun Tang

Applied Thermal Engineering

DOI

2026

Material Evaluation and Charging–Discharging Characteristics of Packed‐Bed Cold Energy Recovery Units

Aikun Tang, Fushan Zhang, Yi Jin, Jiuxuan Xiang, Jianming Li, Jinyu Jiang, Hongliang Ding, Qi Miao, Wei He, Chenglin Gu

Energy Technology

DOI

2026

Study on the enhancement of ventilation air methane thermal oxidation performance through pulverized coal heat supplement

Aikun Tang, Leiqi Yang, Jiaze Yang, Lu Xiao, Xingyu Chen, Ke Chen, Tao Cai, Shanshan Shao

Energy

DOI

2026

Enhancing low-concentration methane combustion assisted by three-dimensional ordered macro-porous LaMnO3 perovskite catalyst with calcium doping

Qiang Ni, Aikun Tang, Zhuangzhuang Huangfu, Tao Cai, Han Zhang, Xuehong Chen

Thermal Science and Engineering Progress

DOI

2026

Study on thermoelectric conversion characteristics based on pure Ammonia microscale combustion with the assistant of modified LaMnO₃ catalyst

Jingyi Shi, Han Zhang, Tao Cai, Aikun Tang, Junshuo Yao

Applied Thermal Engineering

DOI

2026

Emission mitigation and kinetic insights of ammonia/hydrogen combustion by applying reversal fuel impingement

Tao Cai, Xian Ma, Aikun Tang

Fuel

DOI

2026

Tailoring Bimetallic Pt–Cu Trace Doping on Composite Spinel for Enhanced Low‐Temperature Hydrogen Catalytic Combustion Performance

Getachew Alemu Tenkolu, Aikun Tang, Tao Cai, Qiang Ni, Han Zhang

Advanced Synthesis & Catalysis

DOI

2026

Design and operational strategy of a fuel cell cold start system coupled with PTC heating and phase change thermal storage

Qian Zhang, Tao Cai, Yibin Zhou, Aikun Tang, Kongyang Chen

Applied Thermal Engineering

DOI

2026

Experimental study on the pool and liquid-film boiling characteristics of SF33 on hydrophilically modified copper foam surface

Xingyu Chen, Aikun Tang, Jun Pan, Tao Cai, Kongyang Chen, Leiqi Yang

International Journal of Heat and Mass Transfer

DOI

2026

Experimental investigation of steel-wool-enhanced phase change heat storage integrated air-source heat pump for winter heating applications

Ke Chen, Jianming Li, Jiuxuan Xiang, Aikun Tang, Tao Cai, Chenglin Gu, Qihao Song

Journal of Energy Storage

DOI

2025

微通道内掺氢氨气火焰特性的试验

唐爱坤，李冲，蔡涛

《江苏大学学报(自然科学版)》

2025

Heating performance analysis and operation optimization of CO2 secondary throttle heat pump system for electric vehicles

Weijia Jiang, Kongyang Chen, Aikun Tang, Tao Cai, Shuangyuan Xiong, Zhikun Liu

International Journal of Refrigeration

DOI

2025

Insights into ignition, flame propagation, and emission characteristics of ammonia/hydrogen combustion under intermediate-to-high temperatures and high pressures

Tao Cai, Ke Chen, Aikun Tang

Chemical Engineering Journal

DOI

2025

Construction of electrostatically self-assembled pomelo peel/carbon nanotube aerogel and the modulation of thermal performance in composite phase change material

Jianming Li, Aikun Tang, Yi Jin, Tao Cai, Ke Chen, Shanshan Shao

Biomass and Bioenergy

DOI

2025

Thermodynamic analysis of a liquid air energy storage system integrated with liquefied natural gas cold energy recovery

Jiuxuan Xiang, Kongyang Chen, Aikun Tang, Yi Jin, Tao Cai, Miao Qi, Hongliang Ding

Applied Thermal Engineering

DOI

2025

Efficient combustion of low concentration methane over perovskite/BN-La: Enhanced catalytic performance and fundamental kinetic analysis

Qiang Ni, Aikun Tang, Lu Xiao, Tao Cai, Leiqi Yang

Powder Technology

DOI

2025

A study on the synergistic effects of compressor speed and refrigerant charge amount in R744 transcritical refrigeration cycle

Kongyang Chen, Weijia Jiang, Jiuxuan Xiang, Aikun Tang, Tao Cai, Shuangyuan Xiong, Zhikun Liu

Applied Thermal Engineering

DOI

2025

Cooling performance enhancement and economic analysis of air conditioner systems integrated with phase change materials for telecommunication base station

Jianming Li, Aikun Tang, Yi Jin, Tao Cai, Siyuan Dai

Energy

DOI

2025

Experimental study of water transport in gas diffusion layer of PEMFC considering the phase-change-induced flow

Yiming Xu, Yun Zhang, Lele Zhang, Ruijia Fan, Zhifeng Xia, Aikun Tang, J. Q. Zheng

Energy

DOI

2025

A systematic review of enhancing stabilization performance and mitigating thermoacoustic instability in renewable ammonia turbulent combustion

Tao Cai, Aikun Tang, Qian Zhang, Qiang Ni, Jianming Li

Renewable and Sustainable Energy Reviews

DOI

2025

Experimental analysis of critical operating parameters on heat storage and oxidation performances in a VAM-fueled flow-reversal reactor

Xiao Lu, Leiqi Yang, Jiaze Yang, Aikun Tang, Tao Cai, Houlin Liu, Minggao Tan, Hailong Gan

Energy

DOI

2024

基于全英文授课的留学生“传热学”课程教学

张墨，唐爱坤

《中国电力教育》

2024

电动汽车电池组冷媒直冷系统工作特性的试验

单春贤，杨鹏，唐爱坤，夏灯富

《江苏大学学报(自然科学版)》

2024

杂化氮化硼复合相变微胶囊悬浮液的设计及在PEM燃料电池冷却中的应用

周怡彬，唐爱坤，王贞涛，蔡涛

《汽车安全与节能学报》

2024

Experimental evaluation and mechanism analysis of combustion performance enhancement in composite wall-assisted methane/air mixtures

Tao Cai, Lingjie Gao, Aikun Tang, Getachew Alemu Tenkolu

Energy

DOI

2024

Development of inorganic phase change material and cold charging performance analysis based on cold storage refrigerator

Jiuxuan Xiang, Aikun Tang, Yuting Pan, Yi Jin, Tao Cai

Applied Thermal Engineering

DOI

2024

Experimental study on heat transfer characteristics and Capillary-Assisted enhancement of Dual-Phase immersion battery thermal management system

Ke Chen, Aikun Tang, Jun Pan, Tao Cai, Xingyu Chen, Leiqi Yang

Energy Conversion and Management

DOI

2024

Flame stability enhancement and output performance optimization of a dual reaction zone recirculating micro-combustor

Getachew Alemu Tenkolu, Lingjie Gao, Aikun Tang, Tao Cai, Han Zhang, Chang Xin Liu

Applied Thermal Engineering

DOI

2024

Design of innovative phase-change cold storage refrigerator and simulation analysis of discharging progress

Aikun Tang, Chang Xin Liu, Yuting Pan, Tao Cai, Han Zhang, Yi Jin

Energy

DOI

2024

Visualisation and Heat Transfer Performance of Mini-Channel Flat Heat Pipe with a Binary Mixture

Gaoting Fan, Aikun Tang, Tao Cai, Chunxian Shan, Jun Pan, Yi Jin

Journal of Thermal Science

DOI

2024

Experimental investigations on the thermal destabilization and performance enhancement of ventilation air methane in a reversed flow oxidation reactor

Aikun Tang, Jiaze Yang, Shanshan Shao, Tao Cai, Zhigang Zhang, Lu Xiao

Chemical Engineering and Processing - Process Intensification

DOI

2024

Optimization and working performance analysis of liquid cooling plates in refrigerant direct cooling power battery systems

Aikun Tang, Jiaze Yang, Peng Yang, Han Zhang, Tao Cai

International Journal of Heat and Mass Transfer

DOI

2024

Analysis of the Effects of Structural Parameters on the Thermal Performance and System Stability of Ventilation Air Methane-Fueled Reverse-Flow Oxidation Reactors

Zhigang Zhang, Jiaze Yang, Shanshan Shao, Tao Cai, Aikun Tang, Lu Xiao

Processes

DOI

2024

Optimized Design and Operation Control of Refrigerant Direct Cooling Thermal Management System for Power Battery

Yibin Zhou, Aikun Tang, Zhentao Wang, Peng Yang

Energy Technology

DOI

2024

Heat transfer characteristics of non-uniform channels flat heat pipe with micro pillar arrays and its application in power battery cooling

Weijia Jiang, Aikun Tang, Gaoting Fan, Tao Cai, Shanshan Shao, Jun Pan, Yi Jin

Applied Thermal Engineering

DOI

2024

Experimental study of low-temperature combustion performance in hydrogen/air mixtures over Pt–Cu/HZSM-5/cordierite bimetallic catalysts

Aikun Tang, Zhuangzhuang Huangfu, Ying Zhou, Tao Cai, Qiang Ni

Case Studies in Thermal Engineering

DOI

2024

Promoting effect and kinetic analysis of Fe-Co bimetallic doping on the LaMnO3 catalytic activity for methane combustion

Qiang Ni, Aikun Tang, Tao Cai, Qian Zhang, Zhigang Zhang, Lu Xiao

Chemical Engineering Journal

DOI

2024

Combustion and emission performance evaluation in ammonia/hydrogen-powered system with baffle and secondary injection applied

Aikun Tang, Han Zhang, Tao Cai, Chong Li

Fuel

DOI

2024

Characterization and experimental assessment of hybrid cooling strategy for lithium-ion batteries by integrating microencapsulated phase change materials

Aikun Tang, Jun Pan, Dengfu Xia, Tao Cai, Qian Zhang, Getachew Alemu Tenkolu, Yi Jin

International Journal of Heat and Mass Transfer

DOI

2024

Flame visualization and spectral analysis of combustion instability in a premixed methane/air-fueled micro-combustor

Aikun Tang, Tao Cai, Chong Li, Chen Zhou, Lingjie Gao

Energy

DOI

2023

不同载体Pt基整体式催化剂对氢气低温反应性能的影响

周颖，唐爱坤，倪强，李冲

《江苏大学学报(自然科学版)》

2023

Effect of hetero-/homogenous combustion on energy conversion performances and flame stability of methane/air-fueled micro-combustors with heat-recirculating structure and platinum-coated

Lingjie Gao, T. Cai, Ai-Kun Tang, Hai-Bo Liu

Fuel

DOI

2023

Experimental analysis of power battery preheating system based on thermoelectric elements

Yuting Pan, Aikun Tang, Zhaoyang Liu, Chunxian Shan

Applied Thermal Engineering

DOI

2023

Experimental analysis and multi-objective optimization of flame dynamics and combustion performance in methane-fueled slit-type combustors

Lingjie Gao, Aikun Tang, Tao Cai, Getachew Alemu Tenkolu

Applied Energy

DOI

2023

Experimental and kinetic analyses on the flame dynamics and stabilization of ammonia/hydrogen-air mixtures in a micro-planar combustor

Tao Cai, Aikun Tang, Chong Li

Chemical Engineering Journal

DOI

2023

Effect of dimethyl ether blending on methane flame morphology transformation and stabilization mechanism in a micro-planar combustor

Lingjie Gao, Aikun Tang, Qiuhan Huang, Chong Li

Chemical Engineering and Processing - Process Intensification

DOI

2023

Analysis of entropy generation and exergy efficiency of the methane/dimethyl ether/air premixed combustion in a micro-channel

Qian Zhang, Aikun Tang, Tao Cai, Qiuhan Huang

International Journal of Heat and Mass Transfer

DOI

2022

新工科背景下《传热学》双语课程教学探索与实践

王海，王军锋，康灿，王爽，唐爱坤，屈健

《科技资讯》

DOI

2022

留学生“传热学课程”线上教学模式探索

王海，王军锋，唐爱坤，康灿，高波，王爽

《科技资讯》

DOI

2022

基于热电耦合液体冷却的动力电池热管理系统的实验研究

单春贤，夏灯富，刘朝阳，唐爱坤

《汽车安全与节能学报》

2022

Development and verification of simplified methane/dimethyl ether mechanism for micro-combustion

Ai-Kun Tang, Qiuhan Huang, Yang Li, Lingjie Gao, Qiang Ni

Fuel processing technology

DOI

2022

Experimental evaluation of heat conduction enhancement and lithium-ion battery cooling performance based on h-BN-based composite phase change materials

Jian-Ming Li, Ai-Kun Tang, Xia Shao, Yi Jin, Wen-Chao Chen, Dengfu Xia

International Journal of Heat and Mass Transfer

DOI

2022

Experimental determining flame characteristic of premixed methane/air mixtures in a microchannel supported with Pt/Al2O3/Ni catalyst

Ai-Kun Tang, Haibo Liu, T. Cai, Chong-Ling Li, Lingjie Gao

Chemical Engineering and Processing

DOI

2022

Experimental investigation of aluminum nitride/carbon fiber‐modified composite phase change materials for battery thermal management

Ai-Kun Tang, Wen-Chao Chen, Xia Shao, Yi Jin, Jian-Ming Li, Dengfu Xia

International Journal of Energy Research

DOI

2022

Experimental Investigation of a Battery Thermal Management Device Based on a Composite Phase Change Material Coupled with a Double Helix Liquid Cooling Plate

Yongsheng Yu, Ai-Kun Tang, Wenchao Chen, H. Jia, Yi Jin

Energy & Fuels

DOI

2021

Numerical study on flame shape transition and structure characteristic of premixed CH4/H2-air in the micro-planar combustor

Chen Zhou, Ai-Kun Tang, T. Cai, Dan Zhao, Qiuhan Huang

DOI

2021

Role of hydrogen addition in propane/air flame characteristic and stability in a micro-planar combustor

Ai-Kun Tang, Qiang Ni, Jiang Deng, Qiuhan Huang

DOI

2020

Flame dynamics and stability of premixed methane/air in micro-planar quartz combustors

T. Cai, Ai-Kun Tang, Dan Zhao, Chen Zhou, Qiuhan Huang

DOI

2020

Effect of dimethyl ether addition on flame stability of premixed methane/air in a micro-planar quartz combustor

Jian-Ming Li, Ai-Kun Tang, T. Cai, Chen Zhou

DOI

2020

NO emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system

T. Cai, S. Becker, Fengming Cao, Bing Wang, Ai-Kun Tang, Jianqin Fu, Lei Han, Yu-Ze Sun, Dan Zhao

Chemical Engineering Journal

DOI

2020

Experimental investigation on thermal performance of a battery liquid cooling structure coupled with heat pipe

Xuezhen Yuan, Ai-Kun Tang, Chunxian Shan, Zhaoyang Liu, Jian-Ming Li

Journal of Energy Storage

DOI

2020

Assessing the impact of current control on the thermal management performance of thermoelectric cooling systems

Zhaoyang Liu, Ai-Kun Tang, Chunxian Shan, Xuezhen Yuan, Jian-Ming Li

International Journal of Energy Research

DOI

2020

Thermodynamics and entropy generation studies of a T-shaped micro-combustor: Effects of porous medium and ring-shaped ribs

Siliang Ni, Dan Zhao, S. Becker, Ai-Kun Tang

DOI

2019

微通道内纯甲烷及掺混二甲醚燃烧特性的研究

唐爱坤

《江苏大学》

2019

大容量锂电池液冷冷却结构设计及仿真分析

唐爱坤，娄刘生，单春贤，李建明

《电源技术》

2019

OpenFOAM在传热学教学中的应用

朱跃进，唐爱坤

《科技创新导报》

DOI

2019

Experimental study on flame structure transitions of premixed propane/air in micro-scale planar combustors

Ai-Kun Tang, T. Cai, Jiang Deng, Dan Zhao, Qiuhan Huang, Chen Zhou

Energy

DOI

2019

Entropy generation analysis of combustion process adopting blended propane/hydrogen fuels in micro-combustor

Qiuhan Huang, Ai-Kun Tang, T. Cai, Dan Zhao, Chen Zhou

Chemical Engineering and Processing

DOI

2019

Experimental observation and numerical study on flame structures, blowout limit and radiant efficiency of premixed methane/air in micro-scale planar combustors

T. Cai, Ai-Kun Tang, Dan Zhao, Chen Zhou, Qiuhan Huang

Applied Thermal Engineering

DOI

2019

Optimization design and numerical study on water cooling structure for power lithium battery pack

Ai-Kun Tang, Jian-Ming Li, Liusheng Lou, Chunxian Shan, Xuezhen Yuan

Applied Thermal Engineering

DOI

2018

内置错列挡板式微型燃烧器的工作特性

唐爱坤，乔方方，姜东岳，邓江，许艺鸣，潘剑锋

《哈尔滨工程大学学报》

2018

Experimental and numerical study of premixed propane/air combustion in the micro-planar combustor with a cross-plate insert

Ai-Kun Tang, Jiang Deng, Yi-Ming Xu, Jian-Feng Pan, T. Cai

DOI

2018

Micro combustion in a porous media for thermophotovoltaic power generation

S. Bani, Jian-Feng Pan, Ai-Kun Tang, Qing-Bo Lu, Yi Zhang

DOI

2018

The characteristics of pure heterogeneous reaction for H2/Air mixture in the micro-combustors with different thermophysical properties

Yi Zhang, Jian-Feng Pan, Zhigang Lu, Ai-Kun Tang, Yue-Jin Zhu, S. Bani

Applied Thermal Engineering

DOI

2018

Effects of inlet parameters on combustion characteristics of premixed CH4/Air in micro channels

Ya-Chun Zhang, Jian-Feng Pan, Ai-Kun Tang, Qing-Bo Lu, Zhengqian Zha, S. Bani

Journal of the Energy Institute

DOI

2018

Numerical investigation of key parameters of the porous media combustion based Micro-Thermophotovoltaic system

S. Bani, Jian-Feng Pan, Ai-Kun Tang, Qing-Bo Lu, Yi Zhang

Energy

DOI

2018

Numerical study on energy conversion performance of micro-thermophotovoltaic system adopting a heat recirculation micro-combustor

Ai-Kun Tang, T. Cai, Qiuhan Huang, Jiang Deng, Jian-Feng Pan

Fuel processing technology

DOI

2017

CFD软件在“燃烧学”教学中的实践与探讨

范宝伟，潘剑锋，潘振华，唐爱坤，邵霞

《科技创新导报》

2017

基于Flowmaster的汽车散热器结构分析与正交优化

唐爱坤，乔方方，王广基，娄刘生，潘剑锋

《江苏大学学报(自然科学版)》

2017

Effect of micro-pin-fin arrays on the heat transfer and combustion characteristics in the micro-combustor

Jian-Feng Pan, Jian Zhu, Qi-Sheng Liu, Yue-Jin Zhu, Ai-Kun Tang, Qing-Bo Lu

DOI

2017

Interaction between heterogeneous and homogeneous reaction of premixed hydrogen–air mixture in a planar catalytic micro-combustor

Qing-Bo Lu, Jian-Feng Pan, Wen-Ming Yang, Ai-Kun Tang, S. Bani, Xia Shao

DOI

2017

Effect of gas-phase reaction on catalytic reaction for H-2/O-2 mixture in micro combustor

Yi Zhang, Jian-Feng Pan, Ai-Kun Tang, Yang-Xian Liu, Zhen-Hua Pan, Qing-Bo Lu, Peter Otchere

DOI

2017

Combustion characteristics of premixed propane/hydrogen/air in the micro-planar combustor with different channel-heights

Ai-Kun Tang, Jiang Deng, T. Cai, Yi-Ming Xu, Jian-Feng Pan

DOI

2017

Experimental investigation on combustion characteristics of premixed propane/air in a micro-planar heat recirculation combustor

Ai-Kun Tang, T. Cai, Jiang Deng, Yi-Ming Xu, Jian-Feng Pan

DOI

2017

Hetero-/homogeneous combustion characteristics of premixed hydrogen-air mixture in a planar micro-reactor with catalyst segmentation

Jian-Feng Pan, Qing-Bo Lu, S. Bani, Ai-Kun Tang, Wen-Ming Yang, Xia Shao

DOI

2016

工程认证背景下机械类专业“传热学”课程教学的探索与改革

张彭岗，张墨，唐爱坤

《教育教学论坛》

2016

Effects of products from heterogeneous reactions on homogeneous combustion for H2/O2 mixture in the micro combustor

Qing-Bo Lu, Jian-Feng Pan, Wen-Ming Yang, Zhen-Hua Pan, Ai-Kun Tang, Yi Zhang

DOI

2016

Hetero-/homogeneous combustion of premixed hydrogen–oxygen mixture in a micro-reactor with catalyst segmentation

Qing-Bo Lu, Jian-Feng Pan, Song Hu, Ai-Kun Tang, Xia Shao

DOI

2015

微型燃烧器内掺氢甲烷燃烧特性的数值模拟

许艺鸣，单春贤，唐爱坤，潘剑锋，侯智勇，邬迪

《机械工程学报》

2015

应用于微尺度燃烧模型的氢氧反应机理的简化

潘剑锋，陈林林，刘杨先，唐爱坤，邵霞，陈琳琳

《燃烧科学与技术》

2015

微尺度条件下反复熄燃火焰特性的实验研究

潘剑锋，侯智勇，刘启胜，唐爱坤，邵霞

《热科学与技术》

2015

乙炔/空气预混火焰合成碳纳米管的影响因素

张倚，潘剑锋，杨辉，卢青波，唐爱坤

《燃烧科学与技术》

2015

Effects of different parameters on the flow field of peripheral ported rotary engines

Bao-Wei Fan, Jian-Feng Pan, Wen-Ming Yang, H. An, Ai-Kun Tang, Xia Shao, H. Xue

DOI

2015

Experimental and numerical investigation of the fluid flow in a side-ported rotary engine

Bao-Wei Fan, Jian-Feng Pan, Ai-Kun Tang, Zhen-Hua Pan, Yue-Jin Zhu, H. Xue

DOI

2015

Design and working performance study of a novel micro parallel plate combustor with two nozzles for micro thermophotovotaic system

Jian-Feng Pan, Zhi-Yong Hou, Yang-Xian Liu, Ai-Kun Tang, Jun Zhou, Xia Shao, Zhen-Hua Pan, Qian Wang

DOI

2015

Effects of pocket shape and ignition slot locations on the combustion processes of a rotary engine fueled with natural gas

Bao-Wei Fan, Jian-Feng Pan, Zhen-Hua Pan, Ai-Kun Tang, Yue-Jin Zhu, H. Xue

DOI

2015

Development of a high-temperature and high-uniformity micro planar combustor for thermophotovoltaics application

Dong-Yue Jiang, Wen-Ming Yang, Ai-Kun Tang

DOI

2015

Hydrogen/oxygen premixed combustion characteristics in micro porous media combustor

Jian-Feng Pan, D. Wu, Yang-Xian Liu, H.-F. Zhang, Ai-Kun Tang, H. Xue

DOI

2015

Numerical study of premixed hydrogen/air combustion in a micro planar combustor with parallel separating plates

Ai-Kun Tang, Jian-Feng Pan, Wen-Ming Yang, Yi-Ming Xu, Zhi-Yong Hou

DOI

2015

A comparative study on combustion characteristics of methane, propane and hydrogen fuels in a micro-combustor

Ai-Kun Tang, Yi-Ming Xu, Shan Chunxian, Jian-Feng Pan, Yang-Xian Liu

DOI

2015

Combustion characteristics and performance evaluation of premixed methane/air with hydrogen addition in a micro-planar combustor

Ai-Kun Tang, Yi-Ming Xu, Jian-Feng Pan, Wen-Ming Yang, Dong-Yue Jiang, Qing-Bo Lu

DOI

2014

点火提前角对天然气转子发动机燃烧过程的影响

范宝伟，潘剑锋，陈瑞，刘杨先，唐爱坤，王谦

《兵工学报》

2014

Secondary-power-generation thermophotovoltaic and thermoelectric co-production device

Yi-Ming Xu, Ai-Kun Tang, Chun-Xian Dan, Jian-Feng Pan, Xia Shao

2014

Sealing element at top of novel rotor

Jian-Feng Pan, Ma Xiao, Xia Shao, Yang-Xian Liu, Ai-Kun Tang

2013

乙醇/空气扩散火焰制备碳纳米管的影响因素

潘剑锋，卢青波，杨辉，潘建梅，邵霞，唐爱坤

《燃烧科学与技术》

2013

微通道内气体库埃特流动的DSMC模拟

邵霞，潘剑锋，薛宏，王谦，唐爱坤

《工程热物理学报》

2013

卓越工程师背景下“传热学”课程教学的思考

唐爱坤，潘剑锋，邵霞，张彭岗，张墨

《中国电力教育》

2013

点火位置对天然气转子发动机燃烧的影响

潘剑锋，范宝伟，陈瑞，卢青波，唐爱坤，邵霞，王谦

《内燃机工程》

2013

Analysis of Criterion Number of Heat Transfer in Micro Catalytic Combustion Process

Song Hu, Pan-Jian Feng, Ai-Kun Tang, Xia Shao, Yang-Xian Liu

DOI

2013

Spray and combustion visualization of bio-diesel in a direct injection diesel engine

Jian-Feng Pan, Wen-Ming Yang, S. Chou, De-Tao Li, H. Xue, Jingang Zhao, Ai-Kun Tang

DOI

2013

Numerical Study on Combustion Performance Comparison of Premixed Methane-Air in Micro-Combustors with and without Heat Recirculating Channel

Ai-Kun Tang, Jian-Feng Pan, Xia Shao, Yang-Xian Liu

DOI

2013

Novel distributed cogeneration system utilizing solar energy and chemical energy of fuel

Jian-Feng Pan, Song-Ge Hu, Yang-Xian Liu, Ai-Kun Tang, Xia Shao

2012

极限尺寸平板式微热光电系统的构建及性能评估

唐爱坤，潘剑锋，薛宏，杨文明，邵霞

《工程热物理学报》

2012

突出能力培养的工程热物理专业综合改革

邵霞，潘剑锋，唐爱坤，王谦，何志霞

《中国电力教育》

2012

微尺度催化燃烧过程中传质准则数分析

周俊，潘剑锋，卢青波，唐爱坤，邵霞

《小型内燃机与车辆技术》

2012

Manufacture method for miniature catalytic combustor

Qing-Rui Wu, Ai-Kun Tang, Jian-Feng Pan, Bao-Wei Fan

2011

带有预热通道的微平行板燃烧器的数值模拟

唐爱坤，潘剑锋，薛宏，李晓春，段炼，李德桃

《江苏大学学报(自然科学版)》

2011

微尺度下氢氧预混合气催化燃烧的研究

潘剑锋，范宝伟，吴庆瑞，李晓春，唐爱坤，薛宏

《机械工程学报》

2011

燃烧室结构对微热光电系统能量转换的影响分析

唐爱坤，潘剑锋，薛宏，李晓春，邵霞，李德桃

《兵工学报》

2011

平板式微热光电系统能量转换过程的研究

唐爱坤

《江苏大学》

2011

亚毫米通道内的氢氧预混合燃烧

潘剑锋，周俊，段炼，李德桃，薛宏，唐爱坤

《燃烧科学与技术》

2011

Analysis on Effect of Combustor Structure on Energy Transition in Micro-thermophotovoltaic System

Ai-Kun Tang

2011

Numerical Simulation Study of Premixed Hydrogen-Oxygen Combustion Process in Micro-scale Rectangular Channel

Ai-Kun Tang, Jian-Feng Pan, Shaoxiong Xia, Xue Hong

International Conference on Computer Distributed Control and Intelligent Environmental Monitoring

DOI

2011

Premixed Combustion of Hydrogen and Oxygen in Sub-Millimeter Channels

Ai-Kun Tang

2010

亚毫米平行板通道内燃烧过程的数值模拟

李晓春，潘剑锋，李德桃，唐爱坤，薛宏，杨文明

《小型内燃机与车辆技术》

2010

改装直喷式柴油机中生物柴油喷雾燃烧过程试验研究

潘剑锋，赵金刚，李德桃，薛宏，唐爱坤，张梦云

《内燃机工程》

2010

Combustion of Hydrogen-Oxygen Characteristics in a Sub-Millimeter Scale Catalytic Combustor

Qing-Rui Wu, Jian-Feng Pan, H. Xue, Ai-Kun Tang, Jun Zhou

2010

Micro combustion in sub-millimeter channels for novel modular thermophotovoltaic power generators

Jian-Feng Pan, Wen-Ming Yang, Ai-Kun Tang, S. Chou, L. Duan, X.-C. Li, H. Xue

DOI

2010

Numerical Analysis of the Thermophotovoltaic Energy Transition in the MTPV System

Ai-Kun Tang

DOI

2010

Solar thermophotovoltaic hydrogen generating device

Ai-Kun Tang, Huan Xu, Jian-Feng Pan, Bo Tian

2009

材料和喷口直径对多孔介质微燃烧的影响

张会峰，潘剑锋，唐爱坤，李德桃，薛宏，李晓春

《小型内燃机与车辆技术》

2009

平板式MTPV系统中燃烧若干影响因素的试验

薛宏，段炼，潘剑锋，唐爱坤，李德桃，杨文明

《江苏大学学报(自然科学版)》

2008

基于改进遗传算法的汽车散热器优化设计

唐爱坤，潘剑锋，陈春伟，李德桃，于海群

《江苏大学学报(自然科学版)》

2006

应用遗传算法优化设计汽车散热器

杨志坚，魏琪，唐爱坤

《拖拉机与农用运输车》

2006

内置锯齿翅片管翅式汽车中冷器的实验研究及计算机模拟

唐爱坤

《江苏大学》

2006

Optimum Design of Automotive Radiator with Genetic Algorithm

Tang Aikun

Tractor & Farm Transporter

2005

燃气—蒸汽联合循环热电冷三联供系统分析

唐爱坤，魏琪，杨志坚，王贞涛

《机电信息》

2005

基于高压电技术的烟气脱硫研究与应用进展

王贞涛，闻建龙，陈汇龙，唐爱坤

《中国农机化学报》

精选作品

期刊论文

《热工过程自动控制》课程教学改革探讨

CFD-DEM simulation of liquid-solid two-phase flow characteristics in slender straight pipes

Mechanistic study of the regulatory effects of key discharge parameters on plasma-assisted microscale methane combustion

Experimental study on the conversion characteristics and performance enhancement of foam-supported spinel catalysts for low-concentration hydrogen

A comprehensive review of renewable ammonia combustion applied to micro-gas turbines and micro-thermophotovoltaic systems

Material Evaluation and Charging–Discharging Characteristics of Packed‐Bed Cold Energy Recovery Units

Study on the enhancement of ventilation air methane thermal oxidation performance through pulverized coal heat supplement

Enhancing low-concentration methane combustion assisted by three-dimensional ordered macro-porous LaMnO3 perovskite catalyst with calcium doping

Study on thermoelectric conversion characteristics based on pure Ammonia microscale combustion with the assistant of modified LaMnO₃ catalyst

Emission mitigation and kinetic insights of ammonia/hydrogen combustion by applying reversal fuel impingement

Tailoring Bimetallic Pt–Cu Trace Doping on Composite Spinel for Enhanced Low‐Temperature Hydrogen Catalytic Combustion Performance

Design and operational strategy of a fuel cell cold start system coupled with PTC heating and phase change thermal storage

Experimental study on the pool and liquid-film boiling characteristics of SF33 on hydrophilically modified copper foam surface

Experimental investigation of steel-wool-enhanced phase change heat storage integrated air-source heat pump for winter heating applications

微通道内掺氢氨气火焰特性的试验

Heating performance analysis and operation optimization of CO2 secondary throttle heat pump system for electric vehicles

Insights into ignition, flame propagation, and emission characteristics of ammonia/hydrogen combustion under intermediate-to-high temperatures and high pressures

Construction of electrostatically self-assembled pomelo peel/carbon nanotube aerogel and the modulation of thermal performance in composite phase change material

Thermodynamic analysis of a liquid air energy storage system integrated with liquefied natural gas cold energy recovery

Efficient combustion of low concentration methane over perovskite/BN-La: Enhanced catalytic performance and fundamental kinetic analysis

A study on the synergistic effects of compressor speed and refrigerant charge amount in R744 transcritical refrigeration cycle

Cooling performance enhancement and economic analysis of air conditioner systems integrated with phase change materials for telecommunication base station

Experimental study of water transport in gas diffusion layer of PEMFC considering the phase-change-induced flow

A systematic review of enhancing stabilization performance and mitigating thermoacoustic instability in renewable ammonia turbulent combustion

Experimental analysis of critical operating parameters on heat storage and oxidation performances in a VAM-fueled flow-reversal reactor

基于全英文授课的留学生“传热学”课程教学

电动汽车电池组冷媒直冷系统工作特性的试验

杂化氮化硼复合相变微胶囊悬浮液的设计及在PEM燃料电池冷却中的应用

Experimental evaluation and mechanism analysis of combustion performance enhancement in composite wall-assisted methane/air mixtures

Development of inorganic phase change material and cold charging performance analysis based on cold storage refrigerator

Experimental study on heat transfer characteristics and Capillary-Assisted enhancement of Dual-Phase immersion battery thermal management system

Flame stability enhancement and output performance optimization of a dual reaction zone recirculating micro-combustor

Design of innovative phase-change cold storage refrigerator and simulation analysis of discharging progress

Visualisation and Heat Transfer Performance of Mini-Channel Flat Heat Pipe with a Binary Mixture

Experimental investigations on the thermal destabilization and performance enhancement of ventilation air methane in a reversed flow oxidation reactor

Optimization and working performance analysis of liquid cooling plates in refrigerant direct cooling power battery systems

Analysis of the Effects of Structural Parameters on the Thermal Performance and System Stability of Ventilation Air Methane-Fueled Reverse-Flow Oxidation Reactors

Optimized Design and Operation Control of Refrigerant Direct Cooling Thermal Management System for Power Battery

Heat transfer characteristics of non-uniform channels flat heat pipe with micro pillar arrays and its application in power battery cooling

Experimental study of low-temperature combustion performance in hydrogen/air mixtures over Pt–Cu/HZSM-5/cordierite bimetallic catalysts

Promoting effect and kinetic analysis of Fe-Co bimetallic doping on the LaMnO3 catalytic activity for methane combustion

Combustion and emission performance evaluation in ammonia/hydrogen-powered system with baffle and secondary injection applied

Characterization and experimental assessment of hybrid cooling strategy for lithium-ion batteries by integrating microencapsulated phase change materials

Flame visualization and spectral analysis of combustion instability in a premixed methane/air-fueled micro-combustor

不同载体Pt基整体式催化剂对氢气低温反应性能的影响

Effect of hetero-/homogenous combustion on energy conversion performances and flame stability of methane/air-fueled micro-combustors with heat-recirculating structure and platinum-coated

Experimental analysis of power battery preheating system based on thermoelectric elements

Experimental analysis and multi-objective optimization of flame dynamics and combustion performance in methane-fueled slit-type combustors

Experimental and kinetic analyses on the flame dynamics and stabilization of ammonia/hydrogen-air mixtures in a micro-planar combustor

Effect of dimethyl ether blending on methane flame morphology transformation and stabilization mechanism in a micro-planar combustor

Analysis of entropy generation and exergy efficiency of the methane/dimethyl ether/air premixed combustion in a micro-channel

新工科背景下《传热学》双语课程教学探索与实践

留学生“传热学课程”线上教学模式探索

基于热电耦合液体冷却的动力电池热管理系统的实验研究

Development and verification of simplified methane/dimethyl ether mechanism for micro-combustion

Experimental evaluation of heat conduction enhancement and lithium-ion battery cooling performance based on h-BN-based composite phase change materials

Experimental determining flame characteristic of premixed methane/air mixtures in a microchannel supported with Pt/Al2O3/Ni catalyst

Experimental investigation of aluminum nitride/carbon fiber‐modified composite phase change materials for battery thermal management

Experimental Investigation of a Battery Thermal Management Device Based on a Composite Phase Change Material Coupled with a Double Helix Liquid Cooling Plate

Numerical study on flame shape transition and structure characteristic of premixed CH4/H2-air in the micro-planar combustor

Role of hydrogen addition in propane/air flame characteristic and stability in a micro-planar combustor

Flame dynamics and stability of premixed methane/air in micro-planar quartz combustors

Effect of dimethyl ether addition on flame stability of premixed methane/air in a micro-planar quartz combustor

NO emission performance assessment on a perforated plate-implemented premixed ammonia-oxygen micro-combustion system

Experimental investigation on thermal performance of a battery liquid cooling structure coupled with heat pipe

Assessing the impact of current control on the thermal management performance of thermoelectric cooling systems

Thermodynamics and entropy generation studies of a T-shaped micro-combustor: Effects of porous medium and ring-shaped ribs

微通道内纯甲烷及掺混二甲醚燃烧特性的研究

大容量锂电池液冷冷却结构设计及仿真分析

OpenFOAM在传热学教学中的应用

Experimental study on flame structure transitions of premixed propane/air in micro-scale planar combustors

Entropy generation analysis of combustion process adopting blended propane/hydrogen fuels in micro-combustor

Experimental observation and numerical study on flame structures, blowout limit and radiant efficiency of premixed methane/air in micro-scale planar combustors

Optimization design and numerical study on water cooling structure for power lithium battery pack

内置错列挡板式微型燃烧器的工作特性

Experimental and numerical study of premixed propane/air combustion in the micro-planar combustor with a cross-plate insert

Micro combustion in a porous media for thermophotovoltaic power generation

The characteristics of pure heterogeneous reaction for H2/Air mixture in the micro-combustors with different thermophysical properties