张立军｜中国石油大学(华东)｜学者主页

2026

超深井随钻微扩眼工具结构改进与现场应用分析

张立军

《石化技术》

2026

支撑轮式管道机器人结构设计与运动分析

徐晓滨，马哲，王杭，周继续，张立军

《电子质量》

2026

塔河油田碎屑岩近油基钻井液技术研究与应用

张立军

《内蒙古石油化工》

2026

Thrust Performance and Propulsive Efficiency of Bioinspired Piston-Type Synthetic Jet Underwater Propellers

Xu Zhang, Zhenwei Gan, Lijun Zhang, Ziyi Liu, Shibo Liu, Qirui Chen, Shang Zhenglan, Zuhua Duan

Journal of Bionic Engineering

DOI

2026

High-Fidelity CFD-Based Pitch Curve Correction for IEA 15MW Wind Turbine

Xu Zhang, Lijun Zhang

Springer Link (Chiba Institute of Technology)

DOI

2026

Study on flow field characteristics and performance of the prairie dog burrow-inspired ducted wind turbine in yaw conditions

Shibo Liu, Lijun Zhang

Springer Link (Chiba Institute of Technology)

DOI

2026

Study on flow field characteristics and performance of the prairie dog burrow-inspired ducted wind turbine in yaw conditions

Shibo Liu, Lijun Zhang

E3S Web of Conferences

DOI

2025

“机电信息检测与处理技术”课程“三三三”教学模式创新与实践

张立军，王旱祥，纪仁杰

《高教论坛》

2025

Formability of high-pressure thin-walled cylindrical parts by counter-roller spinning process: Considering different roller rotation modes

Ning Yang, Lijun Zhang, Yucai Li, Kaiguang Luo, Hong Chi, Lukuan Li, Su Liu, Shen Fan, Jian Jun Zhong, Hui Fan

The International Journal of Advanced Manufacturing Technology

DOI

2025

Formability of a new composite counter-roller spinning process with active and passive rotation of the rollers

Ning Yang, Lijun Zhang, Hong Chi, Lukuan Li, Yucai Li, Kaiguang Luo, Su Liu, Shen Fan, Jian Jun Zhong

Journal of Manufacturing Processes

DOI

2025

Research on effect of pre-stress on cutting force of metal bar surface notching in low-stress cropping

Jiayi Xu, Lijun Zhang, Qing Zhao, Dejingwei Sun, Chen Wang, Jianming Yang

Journal of Physics Conference Series

DOI

2025

Quantitative evaluation of surface crack depth on notched bars with laser-infrared detection technology

Jiayi Xu, Lijun Zhang, Hang Wang, Ning Yang, Kaiguang Luo, Jianming Yang

Nondestructive Testing And Evaluation

DOI

2025

Simulation analysis and lightweight design of a heavy-duty truck methanol fuel tank

Hong Chi, Haisen Lei, Lijun Zhang, Zhitong Zhang, Xieteng Qi, Chao Liu, Yanli Liu, Huidong Cao, Ji P, Yiqun Du, Xiaosheng Wu

Results in Engineering

DOI

2025

Multi-physics optimized triple-piezoelectric wind energy harvester: synergistic vortex-induced vibration-galloping coupling and non-contact energy conversion

Jiahui Lü, Shibo Liu, Lijun Zhang, Ziyi Liu, Xu Zhang, Xudong Cui, Zhengjun Jing

Renewable Energy

DOI

2025

Aerodynamic-structural similarity criteria for scaled-down models of ultra-long wind turbine blade

Xu Zhang, Lijun Zhang, Lijun Zhang, Kaifei Wang, Xudong Cui, Ziyi Liu, Zhengjun Jing, Jiahui Lu, Jiahui Lu, Baoping Cai

Renewable Energy

DOI

2025

Optimized empty duct geometry for ducted wind turbines: A prairie dog burrow-inspired approach

Shibo Liu, Lijun Zhang, Liuyang Jiao, Jiahui Lü, Ziyi Liu, Zhengjun Jing, Xu Zhang, Xudong Cui, Hang Wang

Energy

DOI

2025

A novel bio-inspired ducted wind turbine: from prairie dog burrow architecture to aerodynamic performance optimization

Shibo Liu, Lijun Zhang, Jiahui Lü, Ziyi Liu, Zhengjun Jing, Xu Zhang, Xudong Cui, Hang Wang

Renewable Energy

DOI

2025

Research on the aerodynamic performance and bionic application of dragonfly wing corrugation

Lijun Zhang, Kaifei Wang, Xu Zhang, Shibo Liu, Zhengjun Jing, Jiahui Lu, Xudong Cui, Ziyi Liu

Bioinspiration & Biomimetics

DOI

2025

Influence of the perpendicularity error direction angle on the hydrostatic thrust bearing motion error

Zhiwei Wang, Bingqing Yang, Yang Liu, Penghao Fu, Lijun Zhang, Liang Yuan

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2025

Experimental study on the fracture morphology of chips in 50# steel internal chip removal deep hole drilling

Qingqiang He, Fazhe Sun, Shuai Zhang, Zhijun Zou, Kun Pang, Hang Che, Lijun Zhang

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2025

Influence of blades with surface grooves on aerodynamic performance of H-type vertical axis wind turbine

Ankang Sun, Kaifei Wang, Lijun Zhang, Xu Zhang, Shibo Liu, Zhengjun Jing, Jiahui Lu, Xudong Cui, Jing Liu, Yifan Zhang, Weijian Zhang, Jiaxuan Li

Energy Sources Part A Recovery Utilization and Environmental Effects

DOI

2024

Evaluation and correction methods for geometric errors of hydrostatic thrust bearings

Zhiwei Wang, Bingqing Yang, Cong Xu, Penghao Fu, Yanhao Jia, Aiqin Sun, Lijun Zhang, Liang Yuan

Scientific Reports

DOI

2024

Full active counter-roller spinning for thin-walled cylinders: Macroscopic deformation mechanism, mesoscopic texture evolution, and forming performance strengthening

Ning Yang, LI Zhi-shun, Lijun Zhang, Lukuan Li, Su Liu, Xianfeng Chen, Hang Wang, Shen Fan, Shuqin Fan, Jiayi Xu

Thin-Walled Structures

DOI

2024

A theoretical calculation method for asymmetric active counter-roller spinning force by combining strain electrical measurement and simulation

Ning Yang, Lijun Zhang, Su Liu, LI Zhi-shun, Lukuan Li, Jixu Zhou, Shen Fan, Qingqiang He, Yulei An

Journal of Manufacturing Processes

DOI

2024

Pre-stress effect of metal bars in low-stress separation technology

Jiayi Xu, Lijun Zhang, Qing Zhao, Dejingwei Sun, Qiang Zhang, Jianming Yang

Journal of Manufacturing Processes

DOI

2024

Enhancing radial strain uniformity of thin-walled cylinder by the dual asymmetric active counter-roller spinning process

Ning Yang, Xiaohua Chen, Lijun Zhang, LI Zhi-shun, Lukuan Li, Su Liu, Jixu Zhou, Shen Fan, Qingqiang He

Journal of Materials Processing Technology

DOI

2024

Bionic inspired flutter suppression method for offshore ultra-long wind turbine blades

Xu Zhang, Lijun Zhang, Kaifei Wang, Xudong Cui, Zhengjun Jing, Ziyi Liu, Shibo Liu, Jiahui Lu, Yifan Zhang, Jiaxuan Li

Renewable Energy

DOI

2024

Advances in urban wind resource development and wind energy harvesters

Shibo Liu, Lijun Zhang, Jiahui Lü, Xu Zhang, Kaifei Wang, Zhenwei Gan, Xiao Liu, Zhengjun Jing, Xudong Cui, Hang Wang

Renewable and Sustainable Energy Reviews

DOI

2024

Research on the online evaluation of the straightness error of hydrostatic guideways based on deep learning

Zhiwei Wang, Yanhao Jia, Penghao Fu, Haiyin Li, Song Li, Bingqing Yang, Lijun Zhang, Liang Yuan, Kan Shi

The International Journal of Advanced Manufacturing Technology

DOI

2024

Research of biomimetic corrugation on the blade flutter suppression in large-scale wind turbine systems

Lijun Zhang, Kaifei Wang, Xu Zhang, Shibo Liu, Zhengjun Jing, Jiahui Lu, Xudong Cui, Jing Liu

Bioinspiration & Biomimetics

DOI

2024

Effect of Blood Circulation in Veins on Resonance Suppression of the Dragonfly Wing Constructed by Numerical Method

Lijun Zhang, Xu Zhang, Kaifei Wang, Zhenwei Gan, Shibo Liu, Xiao Liu, Zhengjun Jing, Xudong Cui, Jiahui Lu, Jing Liu

Journal of Bionic Engineering

DOI

2023

A multiple rolling-point loading method for low-stress equal-radial-depth cropping

Qiang Zhou, Jiayi Xu, Qiang Zhang, Qing Zhao, Bohan Yang, Lijun Zhang, Qingqiang He, Xiaodong Zhang

Engineering Fracture Mechanics

DOI

2023

Effects of piezoelectric synthetic jet actuator parameters on synthetic jet formation process and actuator performance

Lijun Zhang, Zhenwei Gan, Shibo Liu, Xu Zhang, Ning Yang, Hang Wang, Qiang Zhang, Xiao Liu, Kaifei Wang, Jing Liu

International Journal of Non-Linear Mechanics

DOI

2023

The accuracy design of a new type of pin gauge annular slit restrictor based on the assembly success rate

Zhiwei Wang, Cong Xu, Yanhao Jia, Penghao Fu, Lijun Zhang, Qunhong Tian, Aiqin Sun, Liang Yuan

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2022

塔深5井超深层钻井关键技术

王建云，韩涛，赵宽心，张立军，席宝滨，叶翔

《石油钻探技术》

2022

基于ANSYS抽油泵筒-柱塞摩擦副磨损规律分析

谢文献，苏庆欣，郭立谦，孙喆，张立军，郭伟健，张辛

《石油机械》

2022

Microtab for performance improvement on a vertical-axis wind turbine at high tip-speed-ratios

Wenlong Ma, Hanxiang Wang, Hongdong Yu, Yuxia Mi, Lijun Zhang

Journal of Physics Conference Series

DOI

2022

Research on bar deflection of low-stress cropping process under bending-shear coupling effect

Lijun Zhang, Shulin Fu, Ning Yang, Bohan Yang, Qiang Zhang, Jishao Tao, Hang Wang, Jiayi Xu, Qing Zhao, Qingqiang He, Xiaodong Zhang

Theoretical and Applied Fracture Mechanics

DOI

2022

Research on wear detection mechanism of cylinder liner-piston ring based on energy dissipation and AE

Lijun Zhang, Hang Wang, Dehao Liu, Qiang Zhang, Weijian Guo, Ning Yang, Jiayi Xu, Shulin Fu, Bohan Yang, Shibo Liu, Shuen Zhou

Wear

DOI

2022

Effects of loudspeaker-driven synthetic jet actuator parameters on the characteristics of the synthetic jet

Lijun Zhang, Shibo Liu, Jingxue Lin, Ankang Sun, Zhenwei Gan, Xu Zhang, Jing Liu

Applied Acoustics

DOI

2022

Effect of symmetrical position notching on cracking and cross-section quality of thick-walled metal tube under low-stress cropping

Yanxin Liu, Bohan Yang, Ning Yang, Jiayi Xu, Shulin Fu, Jishao Tao, Qiang Zhou, Qing Zhao, Weijian Guo, Hang Wang, Shibo Liu, Lijun Zhang, Jinbao Wei

The International Journal of Advanced Manufacturing Technology

DOI

2022

Influence of contact parameters on the wear characteristics of fixture-bar friction pair in low-stress cropping

Weijian Guo, Hang Wang, Jishao Tao, Ning Yang, Bohan Yang, Shulin Fu, Jiayi Xu, Tao Liu, Linhan Gou, Lijun Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2022

Research on the reasonable loading method of staged follow-up rolling in low-stress cropping

Ning Yang, Shulin Fu, Jishao Tao, Hang Wang, Bohan Yang, Jiayi Xu, Weijian Guo, LI Zhi-shun, Lijun Zhang

The International Journal of Advanced Manufacturing Technology

DOI

2022

Research on crack propagation law of rotating bending fatigue cropping process based on cusp catastrophe theory

Jiayi Xu, Qiang Zhou, Jishao Tao, Xudong Sun, Qing Zhao, Shulin Fu, Ning Yang, Weijian Guo, Lijun Zhang

Theoretical and Applied Fracture Mechanics

DOI

2022

Review of multi-fin propulsion and functional materials of underwater bionic robotic fish

Zhiwei Wang, Chengliang Dong, Zhenmeng Zhang, Qunhong Tian, Aiqin Sun, Liang Yuan, Lijun Zhang

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2022

Influence of the reasonable crack initiation force obtained by coupling AE parameters and stress-strain on low-stress cropping quality

Jiayi Xu, Dexiao Zhang, Qiang Zhou, Xudong Sun, Ning Yang, Weijian Guo, Shulin Fu, Lijun Zhang

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2021

三角形单极子天线注水管内数据传输机理研究

姜浩，李大伟，王斌，孟令志，张立军

《石油机械》

DOI

2021

Research on three-section type tool path planning algorithm for tooth hot pressing model cutting

Lijun Zhang, Shaowei Fang, Jiayi Xu, Ning Yang, Weijian Guo, Hang Wang, Changliang Li

Computers & Industrial Engineering

DOI

2021

Study on Improving the Levitation Force for a Maglev Load Reduction Machine

Jing Liu, Runbo Wang, Jilong Hu, Qiang Zhang, Hongzhong Ma, Lijun Zhang, Baoping Cai

IEEE Transactions on Applied Superconductivity

DOI

2021

Design on non-stop transportation plugging device for subsea pipeline

Hao Jiang, Lingzhi Meng, Xuebin Niu, Lijun Zhang, Longting Wang, Dawei Li, Wenkai Xu, Binghui Zhang

Journal of Physics Conference Series

DOI

2021

A method of reducing the radial load of the shaft of a vertical axis wind turbine based on movable mass blocks

Lijun Zhang, Junjie Miao, Jiawei Gu, Xiang Li, Kuoliang Hu, Huaibao Zhu, Xuefa Sun, Jing Liu, Yanxin Liu, Zhiwei Wang

Renewable Energy

DOI

2021

Research on the deflection of metal bar with V-shaped notch in low-stress cropping process

Ning Yang, Jishao Tao, Shulin Fu, Bohan Yang, Hang Wang, Weijian Guo, Jiayi Xu, Lijun Zhang

Theoretical and Applied Fracture Mechanics

DOI

2021

An Asymmetric-Primary Axis-Flux Hybrid-Excitation Generator for the Vertical Axis Wind Turbine

Jing Liu, Qiang Zhang, Runbo Wang, Jilong Hu, Lijun Zhang, Baoping Cai

IEEE Access

DOI

2021

Design and Optimization of a Magnetic Levitation Load Reduction Device for a Hydropower Unit

Jing Liu, Hongzhong Ma, Qiang Zhang, Lijun Zhang, Baoping Cai

IEEE Access

DOI

2020

Rationality research of the adjustment law for the blade pitch angle of H-type vertical-axis wind turbines

Lijun Zhang, Jiawei Gu, Huaibao Zhu, Kuoliang Hu, Xiang Li, Liuyang Jiao, Junjie Miao, Jing Liu, Zhiwei Wang

Renewable Energy

DOI

2020

The investigation of low-cycle fatigue crack propagation of 16 Mn eccentric bar based on the acoustic emission technique

Yujian Ren, Yuanzhe Dong, Jingxiang Li, Fei Zhao, Shengdun Zhao, Lijun Zhang, Yongfei Wang, Dong Jin

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2020

Research on the Forces of a Maglev Load-reducing Machine for the Hydropower Unit

Jing Liu, Qiang Zhang, Jiming Chen, Lijun Zhang, Hongzhong Ma

International Conference on Applied Superconductivity and Electromagnetic Devices

DOI

2020

Influences of trailing edge split flap on the aerodynamic performance of vertical axis wind turbine

Lijun Zhang, Jiawei Gu, Kuoliang Hu, Huaibao Zhu, Junjie Miao, Xiang Li, Dongchen Ma, Yuxia Mi, Zhiwei Wang

Energy Science & Engineering

DOI

2019

基于ADAMS的水力式油管切割工具多体动力学研究

谢文献，滕腾，柴德民，张立军，王旱祥，顾嘉伟，刘延鑫

《石油机械》

2018

Research on variable frequency-loading curve in precision cropping system with high-speed and centrifugal action

Lijun Zhang, Depei Zhang, Hanxiang Wang, Shengdun Zhao, Nai-ming Li

The International Journal of Advanced Manufacturing Technology

DOI

2018

Research on critical loading force in precision cropping system based on hydraulic compensation

Lijun Zhang, Xianfeng Chen, Hanxiang Wang, Shengdun Zhao, Nai-ming Li, Depei Zhang

International Journal of Mechanical Sciences

DOI

2018

Research on hydraulic compensation and variable loading arm for a new-type low-stress cropping system

Zhiwei Wang, Lijun Zhang, Depei Zhang, Xianfeng CHEN, Hanxiang Wang, Shengdun Zhao

Journal of Advanced Mechanical Design Systems and Manufacturing

DOI

2017

Numerical simulation and experimental validation for design improvement of packer rubber

Hanxiang Wang, Shengshan Chen, Yanxin Liu, Lijun Zhang, Zhenning Zhang

International Journal of Simulation and Process Modelling

DOI

2017

Investigation on the High-speed Precision Shearing of 5140 Steel Bars Pre-grooved by Laser

Yuanzhe Dong, Wei Zhong, Yujian Ren, Shengdun Zhao, Lijun Zhang

MATEC Web of Conferences

DOI

2016

车载页岩气压裂泵动力端特性分析

车家琪，刘延鑫，张立军

《内蒙古石油化工》

2015

2500型页岩气压裂车底盘车架承载能力分析

王旱祥，苑得鑫，张立军

《甘肃科学学报》

2015

Multidirectional Image Sensing for Microscopy Based on a Rotatable Robot

Yajing Shen, Wenfeng Wan, Lijun Zhang, Yong Li, Haojian Lu, Weili Ding

Sensors

DOI

2015

Research on Radial Motion Characteristic of the Cropping Hammer in Radial-Forging Cropping Method

Lijun Zhang, Shengdun Zhao, Zhenwei Wang

Advances in Materials Science and Engineering

DOI

2014

电潜泵机组油气分离器的腐蚀研究

张冠林，张立军，韩锡鹏，晁明伟，谢文献

《石油机械》

2014

Analysis of Modeling and Vibration Performance of a New Type of Cropping Machine

Lijun Zhang, Shengdun Zhao

The Open Mechanical Engineering Journal

DOI

2014

Research on Fracture Mechanism and Improvement Methods of Electric Submersible Pump Unit’s Joint Screw

Lijun Zhang, Hanxiang Wang, Xie Wenxian

The Open Mechanical Engineering Journal

DOI

2014

Investigation on the Crack Initiation of V-Shaped Notch Tip in Precision Cropping

Lijun Zhang, Shengdun Zhao, Zhenwei Wang

Advances in Materials Science and Engineering

DOI

2013

Theoretical Analysis of Heat Stress Prefabricating the Crack in Precision Cropping

Lijun Zhang, Yongrui Zhao

Journal of Engineering Science and Technology Review

DOI

2011

水平输气管道中内检测器运移速度分析

綦耀升，李娜，张立军，李延祥

《石油机械》

2009

人工智能在流体传动中的应用

张立军，相恒富

《机床与液压》

2004

管道超声纵向导波裂纹检测数值模拟

程载斌，王志华，张立军，马宏伟

《应用力学学报》

1999

利用微生物调剖技术提高原油采收率

高学忠，魏呐，宋荦，张立军，崔会凯

《石油学报》

精选作品

期刊论文

超深井随钻微扩眼工具结构改进与现场应用分析

支撑轮式管道机器人结构设计与运动分析

塔河油田碎屑岩近油基钻井液技术研究与应用

Thrust Performance and Propulsive Efficiency of Bioinspired Piston-Type Synthetic Jet Underwater Propellers

High-Fidelity CFD-Based Pitch Curve Correction for IEA 15MW Wind Turbine

Study on flow field characteristics and performance of the prairie dog burrow-inspired ducted wind turbine in yaw conditions

Study on flow field characteristics and performance of the prairie dog burrow-inspired ducted wind turbine in yaw conditions

“机电信息检测与处理技术”课程“三三三”教学模式创新与实践

Formability of high-pressure thin-walled cylindrical parts by counter-roller spinning process: Considering different roller rotation modes

Formability of a new composite counter-roller spinning process with active and passive rotation of the rollers

Research on effect of pre-stress on cutting force of metal bar surface notching in low-stress cropping

Quantitative evaluation of surface crack depth on notched bars with laser-infrared detection technology

Simulation analysis and lightweight design of a heavy-duty truck methanol fuel tank

Multi-physics optimized triple-piezoelectric wind energy harvester: synergistic vortex-induced vibration-galloping coupling and non-contact energy conversion

Aerodynamic-structural similarity criteria for scaled-down models of ultra-long wind turbine blade

Optimized empty duct geometry for ducted wind turbines: A prairie dog burrow-inspired approach

A novel bio-inspired ducted wind turbine: from prairie dog burrow architecture to aerodynamic performance optimization

Research on the aerodynamic performance and bionic application of dragonfly wing corrugation

Influence of the perpendicularity error direction angle on the hydrostatic thrust bearing motion error

Experimental study on the fracture morphology of chips in 50# steel internal chip removal deep hole drilling

Influence of blades with surface grooves on aerodynamic performance of H-type vertical axis wind turbine

Evaluation and correction methods for geometric errors of hydrostatic thrust bearings

Full active counter-roller spinning for thin-walled cylinders: Macroscopic deformation mechanism, mesoscopic texture evolution, and forming performance strengthening

A theoretical calculation method for asymmetric active counter-roller spinning force by combining strain electrical measurement and simulation

Pre-stress effect of metal bars in low-stress separation technology

Enhancing radial strain uniformity of thin-walled cylinder by the dual asymmetric active counter-roller spinning process

Bionic inspired flutter suppression method for offshore ultra-long wind turbine blades

Advances in urban wind resource development and wind energy harvesters

Research on the online evaluation of the straightness error of hydrostatic guideways based on deep learning

Research of biomimetic corrugation on the blade flutter suppression in large-scale wind turbine systems

Effect of Blood Circulation in Veins on Resonance Suppression of the Dragonfly Wing Constructed by Numerical Method

A multiple rolling-point loading method for low-stress equal-radial-depth cropping

Effects of piezoelectric synthetic jet actuator parameters on synthetic jet formation process and actuator performance

The accuracy design of a new type of pin gauge annular slit restrictor based on the assembly success rate

塔深5井超深层钻井关键技术

基于ANSYS抽油泵筒-柱塞摩擦副磨损规律分析

Microtab for performance improvement on a vertical-axis wind turbine at high tip-speed-ratios

Research on bar deflection of low-stress cropping process under bending-shear coupling effect

Research on wear detection mechanism of cylinder liner-piston ring based on energy dissipation and AE

Effects of loudspeaker-driven synthetic jet actuator parameters on the characteristics of the synthetic jet

Effect of symmetrical position notching on cracking and cross-section quality of thick-walled metal tube under low-stress cropping

Influence of contact parameters on the wear characteristics of fixture-bar friction pair in low-stress cropping

Research on the reasonable loading method of staged follow-up rolling in low-stress cropping

Research on crack propagation law of rotating bending fatigue cropping process based on cusp catastrophe theory

Review of multi-fin propulsion and functional materials of underwater bionic robotic fish

Influence of the reasonable crack initiation force obtained by coupling AE parameters and stress-strain on low-stress cropping quality

三角形单极子天线注水管内数据传输机理研究

Research on three-section type tool path planning algorithm for tooth hot pressing model cutting

Study on Improving the Levitation Force for a Maglev Load Reduction Machine

Design on non-stop transportation plugging device for subsea pipeline

A method of reducing the radial load of the shaft of a vertical axis wind turbine based on movable mass blocks

Research on the deflection of metal bar with V-shaped notch in low-stress cropping process

An Asymmetric-Primary Axis-Flux Hybrid-Excitation Generator for the Vertical Axis Wind Turbine

Design and Optimization of a Magnetic Levitation Load Reduction Device for a Hydropower Unit

Rationality research of the adjustment law for the blade pitch angle of H-type vertical-axis wind turbines

The investigation of low-cycle fatigue crack propagation of 16 Mn eccentric bar based on the acoustic emission technique

Research on the Forces of a Maglev Load-reducing Machine for the Hydropower Unit

Influences of trailing edge split flap on the aerodynamic performance of vertical axis wind turbine

基于ADAMS的水力式油管切割工具多体动力学研究

Research on variable frequency-loading curve in precision cropping system with high-speed and centrifugal action

Research on critical loading force in precision cropping system based on hydraulic compensation

Research on hydraulic compensation and variable loading arm for a new-type low-stress cropping system

Numerical simulation and experimental validation for design improvement of packer rubber

Investigation on the High-speed Precision Shearing of 5140 Steel Bars Pre-grooved by Laser

车载页岩气压裂泵动力端特性分析

2500型页岩气压裂车底盘车架承载能力分析

Multidirectional Image Sensing for Microscopy Based on a Rotatable Robot

Research on Radial Motion Characteristic of the Cropping Hammer in Radial-Forging Cropping Method

电潜泵机组油气分离器的腐蚀研究

Analysis of Modeling and Vibration Performance of a New Type of Cropping Machine

Research on Fracture Mechanism and Improvement Methods of Electric Submersible Pump Unit’s Joint Screw

Investigation on the Crack Initiation of V-Shaped Notch Tip in Precision Cropping

Theoretical Analysis of Heat Stress Prefabricating the Crack in Precision Cropping

水平输气管道中内检测器运移速度分析

人工智能在流体传动中的应用

管道超声纵向导波裂纹检测数值模拟

利用微生物调剖技术提高原油采收率

预印本