孙振铎｜河北大学｜学者主页

2026

An approach for predicting fatigue crack growth in polymers based on high-fidelity multidimensional feature mapping and physical constraints

Xiaobo Cao, Wei Li, A. Serjouei, Zi-Fan Hu, Yuzhe Jin, Xiaolong Li, R. Sun, Hai-Long Deng, Jinfu Lai, Zhen-Duo Sun

International Journal of Fatigue

DOI

2026

An adaptive loss-balancing PIML method with meta-learning and feature transfer for predicting fatigue cracking of viscoelastic polymer

Pilin Song, Wei Li, Zhen-Duo Sun, Hai-Long Deng, A. Serjouei, Jinfu Lai

Theoretical and applied fracture mechanics (Print)

DOI

2026

Multi-scale fatigue crack growth behavior and unified XFEM-VNE predicting approach of L-PBF titanium matrix composites

Asif Mahmood, Wei Li, Ahmad Serjouei, Muhammad Imran Lashari, Zakim Hussain, Zhenduo Sun, Hailong Deng

Theoretical and Applied Fracture Mechanics

DOI

2025

Influence of tensile pre-strain on the low cycle fatigue and fracture behaviour of metastable duplex stainless steel

Shuo Hao, Bin Pang, Zhenduo Sun, Miao Jin, Lei Chen, Kun Yang

Engineering Failure Analysis

DOI

2025

Low-cycle fatigue behavior of Mn-N bearing duplex stainless steel under consideration of deformation-induced martensitic transformation

Shuo Hao, B. Pang, Zhenduo Sun, Wen-Bin Zhang, Miao Jin, Lei Chen, Kun Yang

Materials Science & Engineering: A

DOI

2025

EBSD characterization of martensitic transformation and texture evolution in lean duplex stainless steel under uniaxial loading

Shu-Ling Guo, Zhenduo Sun, Na Li, Miao Jin, Lei Chen, Shuo Hao

Journal of Materials Research and Technology

DOI

2025

Heat-treatment induced microstructural refinement and mechanical properties optimization of laser powder bed fused superalloy

Chuanwen Sun, Hai-Long Deng, Zhenduo Sun, Wei Li

Review of Materials Research

DOI

2025

In-situ experimental investigation on fatigue crack growth behavior and crack tip plastic zone evolution of laser powder bed fused TiC/Ti6Al4V composites

Wei Li, Chuanwen Sun, Cheng Li, Gang Liu, Zhen-Duo Sun

Materials Today Communications

DOI

2024

基于表面裂纹萌生与扩展的疲劳寿命预测模型

孙振铎，吕松峰，庞彬，李伟

《兵器材料科学与工程》

2024

基于最薄弱环节理论的局部失效概率预测方法

孙振铎，吕松峰，李伟，庞彬

《钢铁》

2024

A failure-dependence related stochastic crack growth modeling approach of competing cracking mode

Shuowen Wang, Wei Li, Chuanwen Sun, Gang Liu, Asif Mahmood, Zhen-Duo Sun

Theoretical and applied fracture mechanics (Print)

DOI

2024

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Asif Mahmood, Chuanwen Sun, Wei Li, Gang Liu, Zhen-Duo Sun

Engineering Failure Analysis

DOI

2024

Multiple defect-driven high temperature fatigue internal cracking mechanisms of nickel-based superalloy fabricated by laser powder bed fusion at same stress level

Chuanwen Sun, Wei Li, Gang Liu, R. Sun, Zhen-Duo Sun

Materials Today Communications

DOI

2024

Effect of solution aging treatment on high and very high cycle fatigue properties of nickel-based alloy fabricated by laser powder bed fusion at 25 °C and 650 °C

Chuanwen Sun, Wei Li, R. Sun, Gang Liu, Zhen-Duo Sun

International Journal of Fatigue

DOI

2024

Creep-fatigue crack growth behavior under mean stress effect in polymer electrolyte membrane: Experimental analysis and numerical crack growth modeling

Liang Cai, Wei Li, Pilin Song, Ibrahim Elbugdady, Gang Liu, Zhen-Duo Sun

Engineering Fracture Mechanics

DOI

2022

非等效累积损伤模型

孙振铎，吕松峰，侯东勃，张明洋

《河北大学学报(自然科学版)》

2021

缺口对渗氮CrNiW钢超高周疲劳特性的影响

孙振铎，侯东勃，李伟，张明洋

《钢铁》

DOI

2021

基于裂纹萌生和扩展的渗氮钢疲劳寿命预测

孙振铎，侯东勃，李伟，董鹏

《兵器材料科学与工程》

DOI

2021

渗碳Cr-Mn钢的夹杂分布特性及疲劳强度预测

孙振铎，侯东勃，李志远

《兵器材料科学与工程》

DOI

2021

Thermomechanical analysis of friction stir welding using a new velocity-based model for tool-workpiece interaction

Zhen-Duo Sun, Pengfei Liu, Xing-Hua Yu

The International Journal of Advanced Manufacturing Technology

DOI

2021

Effect of Carburizing and Nitriding on Fatigue Properties of 18Cr2Ni4WA Steel in Very High Cycle Fatigue Regime

Zhen-Duo Sun, Dong-Po Hou, Wei Li

Annales de Chimie - Science des Materiaux

DOI

2018

Dislocation interactions at reduced strain rates in atomistic simulations of nanocrystalline Al

M. Dupraz, Zhen-Duo Sun, C. Brandl, H. Van Swygenhoven

DOI

2017

基于夹杂-细晶粒区-鱼眼疲劳失效的超长寿命预测模型

Hai-Long Deng, Wei Li, Zhen-Duo Sun, Zhen-Yu Zhang

DOI

2016

High Cycle Fatigue Property of Carburized 20Cr Gear Steel under Axial Loading

Pengfei Liu, Wei Li, Abdelhak Nehila, Zhen-Duo Sun, Hai-Long Deng

DOI

2016

Experimental and Numerical Investigations of Fretting Fatigue Behavior for Steel Q235 Single-Lap Bolted Joints

Ya-Zhou Xu, Zhen-Duo Sun, Yuqing Zhang

DOI

2016

Fisheye failure analysis and life design approach for case-carburized gear steel based on statistical evaluation of defect size

Zhen-Duo Sun, Wei Li, Hai-Long Deng, Zhen-Yu Zhang

DOI

2015

基于超高周疲劳多元化失效模式的概率 S-N 曲线模型构建方法

Zhen-Duo Sun, Wei Li, Zhen-Yu Zhang, Hai-Long Deng, Xiao-Hang Zhang

DOI

2015

诱发Cr-Ni-W钢内部失效的夹杂尺寸评估及强度预测

孙振铎，李伟，王哲荣，张震宇，邓海龙

《材料热处理学报》

2015

Interior crack initiation and growth behaviors and life prediction of a carburized gear steel under high cycle fatigue and very high cycle fatigue

Wei Li, Zhen-Duo Sun, Hai-Long Deng, Zhen-Yu Zhang, T. Sakai

DOI

2015

Very High Cycle Fatigue Failure Analysis and Life Prediction of Cr-Ni-W Gear Steel Based on Crack Initiation and Growth Behaviors

Hai-Long Deng, Wei Li, T. Sakai, Zhen-Duo Sun

Materials

DOI

2015

Subsurface Inclusion-induced Crack Nucleation and Growth Behaviors of High Strength Steels under Very High Cycle Fatigue: Characterization and Microstructure-based Modeling

Wei Li, Hai-Long Deng, Zhen-Duo Sun, Zhen-Yu Zhang, Lian-Tao Lu, T. Sakai

DOI

2015

Influence of case-carburizing and micro-defect on competing failure behaviors of Ni–Cr–W steel under gigacycle fatigue

Wei Li, Zhen-Duo Sun, Zhen-Yu Zhang, Hai-Long Deng, T. Sakai

DOI

2014

Surface vs. interior failure behaviors in a structural steel under gigacycle fatigue: Failure analysis and life prediction

Wei Li, Huang Yuan, Zhen-Duo Sun, Zhen-Yu Zhang

DOI

2014

Evaluation of crack growth behavior and probabilistic S–N characteristics of carburized Cr–Mn–Si steel with multiple failure modes

Wei Li, Zhen-Duo Sun, Zhen-Yu Zhang, Hai-Long Deng, T. Sakai

DOI

2014

Method and device for evaluating and measuring mesomechanics/micromechanics performance of surface gradient metal material

Wei Li, Hai-Long Deng, Zhen-Duo Sun, Xiao-Hang Zhang, Zhen-Yu Zhang

精选作品

期刊论文

An approach for predicting fatigue crack growth in polymers based on high-fidelity multidimensional feature mapping and physical constraints

An adaptive loss-balancing PIML method with meta-learning and feature transfer for predicting fatigue cracking of viscoelastic polymer

Multi-scale fatigue crack growth behavior and unified XFEM-VNE predicting approach of L-PBF titanium matrix composites

Influence of tensile pre-strain on the low cycle fatigue and fracture behaviour of metastable duplex stainless steel

Low-cycle fatigue behavior of Mn-N bearing duplex stainless steel under consideration of deformation-induced martensitic transformation

EBSD characterization of martensitic transformation and texture evolution in lean duplex stainless steel under uniaxial loading

Heat-treatment induced microstructural refinement and mechanical properties optimization of laser powder bed fused superalloy

In-situ experimental investigation on fatigue crack growth behavior and crack tip plastic zone evolution of laser powder bed fused TiC/Ti6Al4V composites

基于表面裂纹萌生与扩展的疲劳寿命预测模型

基于最薄弱环节理论的局部失效概率预测方法

A failure-dependence related stochastic crack growth modeling approach of competing cracking mode

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Multiple defect-driven high temperature fatigue internal cracking mechanisms of nickel-based superalloy fabricated by laser powder bed fusion at same stress level

Effect of solution aging treatment on high and very high cycle fatigue properties of nickel-based alloy fabricated by laser powder bed fusion at 25 °C and 650 °C

Creep-fatigue crack growth behavior under mean stress effect in polymer electrolyte membrane: Experimental analysis and numerical crack growth modeling

非等效累积损伤模型

缺口对渗氮CrNiW钢超高周疲劳特性的影响

基于裂纹萌生和扩展的渗氮钢疲劳寿命预测

渗碳Cr-Mn钢的夹杂分布特性及疲劳强度预测

Thermomechanical analysis of friction stir welding using a new velocity-based model for tool-workpiece interaction

Effect of Carburizing and Nitriding on Fatigue Properties of 18Cr2Ni4WA Steel in Very High Cycle Fatigue Regime

Dislocation interactions at reduced strain rates in atomistic simulations of nanocrystalline Al

基于夹杂-细晶粒区-鱼眼疲劳失效的超长寿命预测模型

High Cycle Fatigue Property of Carburized 20Cr Gear Steel under Axial Loading

Experimental and Numerical Investigations of Fretting Fatigue Behavior for Steel Q235 Single-Lap Bolted Joints

Fisheye failure analysis and life design approach for case-carburized gear steel based on statistical evaluation of defect size

基于超高周疲劳多元化失效模式的概率 S-N 曲线模型构建方法

诱发Cr-Ni-W钢内部失效的夹杂尺寸评估及强度预测

Interior crack initiation and growth behaviors and life prediction of a carburized gear steel under high cycle fatigue and very high cycle fatigue

Very High Cycle Fatigue Failure Analysis and Life Prediction of Cr-Ni-W Gear Steel Based on Crack Initiation and Growth Behaviors

Subsurface Inclusion-induced Crack Nucleation and Growth Behaviors of High Strength Steels under Very High Cycle Fatigue: Characterization and Microstructure-based Modeling

Influence of case-carburizing and micro-defect on competing failure behaviors of Ni–Cr–W steel under gigacycle fatigue

Surface vs. interior failure behaviors in a structural steel under gigacycle fatigue: Failure analysis and life prediction

Evaluation of crack growth behavior and probabilistic S–N characteristics of carburized Cr–Mn–Si steel with multiple failure modes

Method and device for evaluating and measuring mesomechanics/micromechanics performance of surface gradient metal material

会议论文

渗碳CrMn齿轮钢超高周疲劳行为及强度预测模型研究

齿轮多工况接触应力分析及多轴疲劳裂纹萌生寿命预测

渗碳CrMn齿轮钢超长寿命疲劳行为及强度预测模型研究

研究方向

Effect of solution aging treatment on high and very high cycle fatigue properties of nickel-based alloy fabricated by laser powder bed fusion at 25 °C and 650 °C