百晓学者学者目录

刘泳

副教授、副研究员、博导，山东大学

精选作品

期刊论文

2026

Quasi-static and dynamic mechanical behavior of powder-metallurgy processed Ti−Zr alloys strengthened by Zr-rich laths

Han-Chun Tang, Yuan-Kui Cao, Yong Liu, Da-Peng Zhao, Bin Liu, Wen-Juan Cheng

Transactions of Nonferrous Metals Society of China

DOI

2025

Achieving Improved Mechanical Property of Laser Powder Bed Fusion‐Processed Ti‐15Zr Alloy by Manipulating Microstructures through Heat Treatment

Jin-Yi Duan, Qian Xie, Yuan-Kui Cao, Tao Liao, Yi-Ming Liu, Jixing Li, Ao Fu, Bin Liu, Yong Liu

Advanced Engineering Materials

DOI

2023

The Effect of Black-Dot Defects on FeCrAl Radiation Hardening

Jian Sun, Miaosen Yu, Zhixian Wei, Hui Dai, Wenxue Ma, Y.-B. Dong, Yong Liu, Ning Gao, Xuelin Wang

Metals

DOI

2023

Damage, waveguide, and electrical properties in (La, Sr)(Al, Ta)O 3 single crystal irradiated with carbon ions

Mei Qiao, Tie-Jun Wang, Yong Liu, Tao Liu, Zhenxing Wang, Wanling Cui, Xiaoxin Wang, Xin Li, Shicai Xu

Journal of the Optical Society of America B

DOI

2022

Strengthening mechanism of Ti-W composites with heterogeneous microstructures

Na Li, Yuan-Kui Cao, Bin Liu, Yong Liu

Materials Research Letters

DOI

2022

A Novel Method for Densification of Titanium Using Hydrogenation-Induced Expansion under Constrained Conditions

Chengshang Zhou, F. Lin, Pei Sun, Zoujun Chen, Zhong-Yuan Duan, X. Zhu, Yong Liu, Zhi-Gang Fang

Scripta Materialia

DOI

2022

Phase transformation and deformation behavior of a TiAl–Nb composite under quasi-static and dynamic loadings

Li Wang, Xiao-Peng Liang, Fu-Qin Jiang, Si-hui Ouyang, Bin Liu, Yong Liu

Materials Science & Engineering: A

DOI

2022

Microstructure and hardness evolution induced by annealing of ion irradiated LiTaO3

Yong Liu, Jian Sun, Xinqing Han, Qing Huang, Eva Zarkadoula, Miguel Luis Crespillo, Ning Gao, Xuelin Wang, Peng Liu

Applied Surface Science

DOI

2022

Discovery of carbon-based strongest and hardest amorphous material

Shuangshuang Zhang, Zihe Li, Kun Luo, Julong He, Yufei Gao, Alexander V.Soldatov, Vicente Benavides, Kaiyuan Shi, Anmin Nie, Bin Zhang, Wentao Hu, Mengdong Ma, Yong Liu, Bin Wen, Guoying Gao, Bing Liu, Yang Zhang, Yu Shu, Dongli Yu, Xiang-Feng Zhou, Zhisheng Zhao, Bo Xu, Lei Su, Guoqiang Yang, Olga P.Chernogorova, Yongjun Tian

National Science Review

2021

Dynamic deformation behavior of a FeCrNi medium entropy alloy

Ao Fu, Bin Liu, Ze-Zhou Li, Bingfeng Wang, Yuan-Kui Cao, Yong Liu

DOI

2021

Corrigendum to “Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition” [Scripta Materialia 200 (2021) 113898]

Xue-Ru Huang, Lan Huang, H.-L. Peng, Yong Liu, Bin Liu, Song Li

DOI

2021

Thermal stability of phase-separated nanograin structure during heat treatment

Huaibing Guo, Fa-Wei Tang, Yong Liu, Zhi Zhao, Hao Lu, C. Hou, Xiao-Yan Song

DOI

2021

High-throughput simulation combined machine learning search for optimum elemental composition in medium entropy alloy

Jia Li, Baobin Xie, Q. Fang, Bin Liu, Yong Liu, P. Liaw

DOI

2021

Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study

Gang-Jie Luo, Li Li, Q. Fang, Jia Li, Yuan-Yuan Tian, Yong Liu, Bin Liu, Jingqing Peng, P. Liaw

Applied Mathematics and Mechanics

DOI

2021

Strengthening the bimodal-grained powder metallurgy ferritic steels with Cu addition by aging hardening

Li-Ming Tan, Ze-Xin Wang, Yunping Li, Yong Liu, Feng Liu

DOI

2021

Effect of furnace atmosphere on sintering process of chromium-containing steel via powder metallurgy

Z. Tan, U. Engström, Kun Li, Yong Liu

Journal of Iron and Steel Research International

DOI

2021

Microstructures and properties of Cu-10Sn oil bearings reinforced by Al2O3 nanoparticles

Feng Chen, Zhi-Qiao Yan, Xiang-Hua Wu, Bin Liu, Yong Liu

Advanced Powder Technology

DOI

2021

Precipitate strengthening in nanocrystalline Ti/Ta composites

Jia Li, Sheng-Hang Xu, Fusheng Tan, Yong Liu, Q. Fang

DOI

2021

Phase decomposition behavior and its effects on mechanical properties of TiNbTa0.5ZrAl0.5 refractory high entropy alloy

Yuan-Kui Cao, Wei-Dong Zhang, Bin Liu, Yong Liu, M. Du, Ao Fu

DOI

2021

Effect of construction angles on microstructure and mechanical properties of AlSi10Mg alloy fabricated by selective laser melting

Xiao-Fen Li, Deng-Hao Yi, Xiao-yu Wu, Jin-Fang Zhang, Xiaohui Yang, Zixuan Zhao, Ying-Hao Feng, Wang Jianhong, Pei-Kang Bai, Bin Liu, Yong Liu

DOI

2021

Friction behavior of Ti-30Fe composites strengthened by TiC particles

Sheng-Hang Xu, Jingwen Qiu, Hui-bin Zhang, Huazhen Cao, Guoqu Zheng, Yong Liu

DOI

2021

Microstructure and mechanical properties of Ti-Ta based composites enhanced by in-situ formation of TiC particles

Sheng-Hang Xu, Ting-En Lu, Jingwen Qiu, Ao Fu, Yong Liu

DOI

2021

Effects of Heat Treatment on High Temperature Mechanical Property and Corrosion Resistance of Hastelloy X Manufactured by Selective Laser Melting

Qing-Xia Zhang, Ling-Tao Meng, Xiao-Tian Yin, Sheng-Hai Wang, Yong Liu, Li Wang

NANO

DOI

2021

Enhancing strength-ductility synergy in a casting non-equiatomic NiCoCr-based high-entropy alloy by Al and Ti combination addition

Xue-Ru Huang, Lan Huang, Hai-Long Peng, Yong Liu, Bin Liu, Song Li

Scripta Materialia

DOI

2021

Mechanical properties and microstructural evolution of a novel (FeCoNi)86.93Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy technique

Ao Fu, Bin Liu, Sheng-Hang Xu, Jing Huang, Yuyan Zhang, Yuan-Kui Cao, Yong Liu

DOI

2021

Fe–C micro-alloying effect on properties of Zr53Al11.6Ni11.7Cu23.7 bulk metallic glass

D. Ding, Jing-Ying Tan, A. Cai, Yong Liu, Hong Wu, Q. An, Peng-wei Li, Yan Zhang, Qing Yang

Transactions of Nonferrous Metals Society of China

DOI

2021

Effects of process parameters on microstructure and cracking susceptibility of a single crystal superalloy fabricated by directed energy deposition

Zhipeng Zhou, Q. Lei, Zhou Yan, Z. Wang, Yijing Shang, Yunping Li, H. Qi, Liang Jiang, Yong Liu, Lan Huang

Materials & Design (1980-2015)

DOI

2021

Structural characterization of the 112¯2 twin boundary and the corresponding stress accommodation mechanisms in pure titanium

B. Wei, Song Ni, Yong Liu, Min Song

DOI

2021

Fracture behavior of cemented carbides with CoNiFe medium entropy alloy binder

C. Qian, Kun Li, Hui-Chao Cheng, Wei Zhang, Xiaosong Jiang, Yong Liu

DOI

2021

Effect of the carbon content on the morphology evolution of the η phase in cemented carbides with the CoNiFeCr high entropy alloy binder

C. Qian, Yong Liu, Hui-Chao Cheng, Kun Li, Bin Liu

International Journal of Refractory Metals and Hard Materials

DOI

2021

Segregation enabled outstanding combination of mechanical and corrosion properties in a FeCrNi medium entropy alloy manufactured by selective laser melting

Heng Duan, Bin Liu, Ao Fu, Junyang He, Tao Yang, C.-T. Liu, Yong Liu

DOI

2021

Creep behaviors of fine-grained Ni-base powder metallurgy superalloys at elevated temperatures

Feng Liu, Ze-Xin Wang, Li-Ming Tan, Xiangyou Xiao, Yunping Li, Xia Li, Hua Zhang, Lilong Zhu, Liang Jiang, Yong Liu

DOI

2021

Phase prediction of Ni-base superalloys via high-throughput experiments and machine learning

Zijun Qin, Z. Wang, Yun-Qing Wang, Lina Zhang, Wei-Fu Li, Jin Liu, Ze-Xin Wang, Zi-Hang Li, Jun Pan, Lei Zhao, Feng Liu, Li-Ming Tan, Jian-xin Wang, Hua Han, Liang Jiang, Yong Liu

DOI

2021

Rate-dependent inhomogeneous creep behavior in metallic glasses

Hong Wu, Feng Xu, Junye Ren, Xiao-dong Lan, Yong Yin, Luxin Liang, Min Song, Yong Liu, Jia Li, Qing-xiang Li, Weidong Huang

Transactions of Nonferrous Metals Society of China

DOI

2021

Self-lubricating behavior of Fe22Co26Cr20Ni22Ta10 high-entropy alloy matrix composites

Wei Xiao, Kun Li, Liu-Liu Han, Yong Liu

DOI

2020

离子辐照核与电子能损及其耦合效应诱导晶体损伤机理研究

刘泳

《山东大学》

2020

Effect of C addition on microstructure and mechanical properties of as-cast HEAs (Fe50Mn30Co10Cr10)100-xCx

Xiu-Lan Liu, Xuerou Zhao, Jian Chen, Yu-Kun Lv, Xian-Hui Wang, Bin Liu, Yong Liu

DOI

2020

Unveiling the atomic-scale origins of high damage tolerance of single-crystal high entropy alloys

Jia Li, Haotian Chen, Quanfeng He, Q. Fang, Bin Liu, Chao Jiang, Yong Liu, Yong Yang, P. Liaw

DOI

2020

Evaluating yield strength of Ni-based superalloys via high throughput experiment and machine learning

Feng Liu, Ze-Xin Wang, Z. Wang, Zijun Qin, Zi-Hang Li, Liang Jiang, Lan Huang, Li-Ming Tan, Yong Liu

DOI

2020

Tribological and biological behaviors of laser cladded Ti-based metallic glass composite coatings

Hong Wu, Luxin Liang, Xiao-dong Lan, Yong Yin, Min Song, Rui-Di Li, Yong Liu, Haiou Yang, Ling Liu, A. Cai, Qing-xiang Li, Weidong Huang

DOI

2020

Microstructure evolution and deformation mechanism of amorphous/crystalline high-entropy-alloy composites

Jia Li, Haotian Chen, H. Feng, Q. Fang, Yong Liu, Feng Liu, Hong Wu, P. Liaw

Journal of Materials Science & Technology

DOI

2020

Effect of WC grain size on mechanical properties and microstructures of cemented carbide with medium entropy alloy Co-Ni-Fe binder

C. Qian, Kun Li, Xue-Yi Guo, Bin Liu, Zheng-yi Long, Yong Liu

Journal of Central South University

DOI

2020

Microstructure and mechanical properties of powder metallurgy high temperature titanium alloy with high Si content

R. Guo, Bin Liu, Rong-Jun Xu, Yuan-Kui Cao, Jingwen Qiu, Feng Chen, Zhi-Qiao Yan, Yong Liu

DOI

2020

Evolution of nano-scaled lamellae and its effect on strength of Ti–Ta composite

Sheng-Hang Xu, Jingwen Qiu, Hui-Bin Zhang, Yong Liu

DOI

2020

A novel equiaxed eutectic high-entropy alloy with excellent mechanical properties at elevated temperatures

Liu-Liu Han, Xian-Dong Xu, Zhi-Ming Li, Bin Liu, C.-T. Liu, Yong Liu

DOI

2020

Hot deformation behavior of nano-sized TiB reinforced Ti-6Al-4V metal matrix composites

Yuan-Kui Cao, Yong Liu, Yunping Li, Bin Liu, Rong-Jun Xu

DOI

2020

Strong-yet-ductile Ti−Zr alloys through high concentration of oxygen strengthening

Yong Liu, Han-Chun Tang, Qianli Huang, Da-Peng Zhao, Junyang He, Yuan-Kui Cao, Min Song, Bin Liu, Si-hui Ouyang

DOI

2020

Fine-grain-embedded dislocation-cell structures for high strength and ductility in additively manufactured steels

Jia Li, Ming Yi, Hong Wu, Q. Fang, Yong Liu, Bin Liu, K. Zhou, P. Liaw

DOI

2020

Effect of melting modes on microstructure and tribological properties of selective laser melted AlSi10Mg alloy

Hong Wu, Yaojia Ren, Junye Ren, A. Cai, Min Song, Yong Liu, Xiao-Lan Wu, Qing-xiang Li, Weidong Huang, Xiaoteng Wang, I. Baker

DOI

2020

Precipitation behavior and mechanical properties of a hot-worked TiNbTa0.5ZrAl0.5 refractory high entropy alloy

Yuan-Kui Cao, Yong Liu, Yunping Li, Bin Liu, Ao Fu, Yan Nie

International Journal of Refractory Metals and Hard Materials

DOI

2020

A comparison of the dry sliding wear of single-phase f.c.c. carbon-doped Fe40.4Ni11.3Mn34.8Al7.5Cr6 and CoCrFeMnNi high entropy alloys with 316 stainless steel

Xiao-Bin Guo, I. Baker, F. Kennedy, S. Ringer, Hansheng Chen, Wei-Dong Zhang, Yong Liu, Min Song

DOI

2020

Graphene-strengthened Inconel 625 Alloy Fabricated by Selective Laser Melting

Xiao-Feng Li, Deng-Hao Yi, Bin Liu, Jin-Fang Zhang, Xiaohui Yang, Congwei Wang, Ying-Hao Feng, Pei-Kang Bai, Yong Liu, M. Qian

DOI

2020

Lattice-distortion dependent yield strength in high entropy alloys

Li Li, Q. Fang, Jia Li, Bin Liu, Yong Liu, P. Liaw

DOI

2020

A Novel Method for Making Co-Cr-Mo Alloy Spherical Powder by Granulation and Sintering

Yang Xia, Jinlong Zhao, Zhao-wang Dong, Xue-Yi Guo, Q. Tian, Yong Liu

DOI

2020

Strength-ductility trade-off deviation in a pre-deformed metastable β titanium alloy

Wei-Dong Zhang, Peng Yang, Xiao-Peng Liang, Yuan-Kui Cao, Si-hui Ouyang, Yong Liu, Zhenggang Wu

DOI

2020

New development of powder metallurgy in automotive industry

Z. Tan, Qing Zhang, Xue-Yi Guo, Weijiang Zhao, Chengshang Zhou, Yong Liu

Journal of Central South University

DOI

2020

Microstructure and elevated-temperature mechanical properties of in situ Ti2AlNb-reinforced TiAl-matrix composite prepared by powder metallurgy

Xiao-Peng Liang, Zhenqi Liu, Hui-Zhong Li, Feihu Chen, Wen-Feng Yang, Si-hui Ouyang, Yong Liu, Li Wang

Materials Today Communications

DOI

2020

Revealing the excellent high-temperature oxidation resistance of a non-equimolar Al1Co25Cr18Fe23Ni23Ta10 compositional complex eutectic alloy

Liu-Liu Han, Tao Quan, Bin Liu, Xian-Dong Xu, Yong Liu

DOI

2020

Effect of WC content on microstructures and mechanical properties of FeCoCrNi high-entropy alloy/WC composite coatings by plasma cladding

Yingbo Peng, Wei Zhang, Tianchen Li, Mingyang Zhang, Bin Liu, Yong Liu, Li Wang, Songhao Hu

DOI

2020

A particle reinforced NbTaTiV refractory high entropy alloy based composite with attractive mechanical properties

Ao Fu, Wenmin Guo, Bin Liu, Yuan-Kui Cao, Liyou Xu, Q. Fang, H. Yang, Yong Liu

DOI

2020

A novel supersaturated medium entropy alloy with superior tensile properties and corrosion resistance

Ao Fu, Bin Liu, Wen-Jun Lu, Bo Liu, Jia Li, Q. Fang, Zhi-Ming Li, Yong Liu

DOI

2020

Effects of multiaxial forging on microstructure and high temperature mechanical properties of powder metallurgy Ti-45Al-7Nb-0.3W alloy

Hui-Zhong Li, Yu Long, Xiao-Peng Liang, Yi-xuan Che, Zhenqi Liu, Yong Liu, Hao Xu, Li Wang

DOI

2020

Mechanical, tribological and electrochemical corrosion properties of in-situ synthesized Al2O3/TiAl composites

Xiaona Lu, Jian-Bo Li, Xian-Hua Chen, Jingwen Qiu, Yan Wang, Bin Liu, Yong Liu, Muhammad Rashad, F. Pan

Intermetallics (Barking)

DOI

2020

Direct reduction of upgraded titania slag by magnesium for making low-oxygen containing titanium alloy hydride powder

Zhao-wang Dong, Yang Xia, Xue-Yi Guo, Jinlong Zhao, Linfeng Jiang, Q. Tian, Yong Liu

DOI

2020

Extraordinary tensile properties of titanium alloy with heterogeneous phase-distribution based on hetero-deformation induced hardening

Yuan-Kui Cao, Wei-Dong Zhang, Bin Liu, Min Song, Yong Liu

DOI

2020

Interfacial structures and mechanical properties of a high entropy alloy-diamond composite

Wei Zhang, Mingyang Zhang, Yingbo Peng, Li Wang, Yong Liu, Songhao Hu, Yang Hu

DOI

2020

In Situ Development and High Temperature Features of CoCrFeNi-M6Cp High Entropy-Alloy Based Hardmetal

Hui-Zhong Li, Heather A. Lin, Xiao-Peng Liang, Wei-Wei He, Bin Liu, Yong Liu, Li Wang

Metals

DOI

2020

An unified model for dislocations interacting with complex-shape voids in irradiated metals

Yang Chen, Yan-Bin Liu, Q. Fang, Jia Li, Yong Liu, P. Liaw

DOI

2020

Nitrogen induced heterogeneous structures overcome strength-ductility trade-off in an additively manufactured high-entropy alloy

Min Song, Rui Zhou, Ji Gu, Zhangwei Wang, Song Ni, Yong Liu

DOI

2020

Preparation and properties of Al2O3-reinforced Cu-Ni-Sn metallic matrix for applications in diamond-cutting tools

Feng Chen, Zhi-Qiao Yan, Zhen-Peng Liu, Y. Long, Nai-Ke Fu, Feng-Lin Zhang, Bin Liu, Yong Liu

DOI

2020

Two-Step Gradient Reduction of Zirconia for Making High-Purity Zirconium Powder

Yang Xia, Jinlong Zhao, Zhao-wang Dong, Xue-Yi Guo, Q. Tian, Siwen Zhang, Yong Liu

DOI

2020

Microstructure and Mechanical Properties of TaNbVTiAlx Refractory High-Entropy Alloys

L. Xiang, Wenmin Guo, Bin Liu, Ao Fu, Jian-Bo Li, Q. Fang, Yong Liu

Entropy

DOI

2020

Microstructure and mechanical properties of iron-containing titanium metal-metal composites

F. Lin, Zhi-Xing Chen, Bin Liu, Yong Liu, Chengshang Zhou

DOI

2020

The probability-correlative oxide particle strengthening in solid-solution alloys

Fang Li, Li Li, Q. Fang, Jia Li, Bin Liu, Yong Liu

Journal of Materials Science

DOI

2020

Phase transformation and structural evolution in a Ti-5at.% Al alloy induced by cold-rolling

B. Wei, Song Ni, Yong Liu, Xiao-Zhou Liao, Min Song

DOI

2020

Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: As-built, annealed and hot-isostatic pressed

Hui Wang, Liu Chen, Bogdan Dovgyy, Wen-Yong Xu, Ai-Xue Sha, Xing-Wu Li, Hui-Ping Tang, Yong Liu, Hong Wu, M. Pham

Additive Manufacturing

DOI

2020

Deformation mechanisms of FeCoCrNiMo0.2 high entropy alloy at 77 and 15 K

Lei Tang, K. Yan, B. Cai, Yi-Qiang Wang, Bin Liu, S. Kabra, Moataz M. Attallah, Yong Liu

DOI

2020

Characterization of the microstructure and deformation substructure evolution in a hierarchal high-entropy alloy by correlative EBSD and ECCI

Zhangwei Wang, Ji Gu, Da-Yong An, Yong Liu, Min Song

Intermetallics (Barking)

DOI

2020

High-throughput determination of interdiffusivity matrices in Ni-Al-Ti-Cr-Co-Mo-Ta-W multicomponent superalloys and their application in optimization of creep resistance

Feng Liu, Ze-Xin Wang, Zi Wang, Jing Zhong, Xiao-Ke Wu, Zijun Qin, Zi-Hang Li, Li-Ming Tan, Lei Zhao, Lilong Zhu, Liang Jiang, Lan Huang, Li-Jun Zhang, Yong Liu

Materials Today Communications

DOI

2019

Ultra-low cost Ti powder for selective laser melting additive manufacturing and superior mechanical properties associated

Yuhang Hou, Bin Liu, Yong Liu, Ying-Hao Zhou, T. Song, Qi Zhou, G. Sha, M. Yan

Opto-Electronic Advances

DOI

2019

Effect of roughness on general corrosion and pitting of (FeCoCrNi)0.89(WC)0.11 high-entropy alloy composite in 3.5 wt.% NaCl solution

Liang Wei, Yong Liu, Qian Li, Y. Cheng

Corrosion Science

DOI

2019

Effect of Al and Sc on deformation behavior of FeCoNi multi-element alloys

Rui Zhou, Mou Li, Jingwen Qiu, Si-hui Ouyang, Di Pan, Chengshang Zhou, Yong Liu

Transactions of Nonferrous Metals Society of China

DOI

2019

Effect of multi-component carbides on the mechanical behavior of a multi-element alloy

Rui Zhou, Mou Li, Hong Wu, Bin Liu, Yong Liu

Materials Science & Engineering: A

DOI

2019

Effects of C and Mo on microstructures and mechanical properties of dual-phase high entropy alloys

Q. An, Jiawen Wang, Yong Liu, Bin Liu, Wenmin Guo, Q. Fang, Yan Nie

Intermetallics (Barking)

DOI

2019

Precipitation behavior of Ti-45Al-3Fe-2Mo-0.5C intermetallics after creep tests at 750 °C

Jingwen Qiu, Canxu Zhou, Bin Liu, Yong Liu, Hui-Zhong Li, Xiao-Peng Liang, X. Zan

Materials Characterization

DOI

2019

Three dimensional crystallographic orientation relationships for hexagonal close packed structure to face centered cubic structure transformation in pure titanium

B. Wei, Song Ni, Yong Liu, Min Song

Scripta Materialia

DOI

2019

Low-cost and high-strength powder metallurgy Ti–Al–Mo–Fe alloy and its application

Rong-Jun Xu, Bin Liu, Zhi-Qiao Yan, Feng Chen, Wenmin Guo, Yong Liu

Journal of Materials Science

DOI

2019

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Liangsheng Li, Jingwen Qiu, Wenmin Guo, Bin Liu, Rui Zhou, Zheng Li, Yong Liu

Entropy

DOI

2019

Tensile properties of three newly developed Ni-base powder metallurgy superalloys

Li-Ming Tan, Yunping Li, W. Deng, Yong Liu, Feng Liu, Yan Nie, Liang Jiang

Journal of Alloys and Compounds

DOI

2019

Effect of large strain cross rolling on microstructure and properties of Al−Li alloy plates with high magnesium content

Cai-He Fan, Dong Zheng, Xi-Hong Chen, Jian-Jun Yang, Yong Liu, Hui-Zhong Li

Transactions of Nonferrous Metals Society of China

DOI

2019

Precipitation strengthening in a hot-worked TiNbTa0.5ZrAl0.5 refractory high entropy alloy

Yuan-Kui Cao, Yong Liu, Yunping Li, Bin Liu, Jiawen Wang, M. Du, Rui-Ping Liu

Materials letters (General ed.)

DOI

2019

Phase Transformation and Deformation Mechanisms in a Cold-Rolled Ti-5at.%Al Alloy

B. Wei, Song Ni, Yong Liu, Xiao-Zhou Liao, Min Song

Social Science Research Network

DOI

2019

Crack propagation behavior of inhomogeneous laminated Ti−Nb metal−metal composite

Wenfang Cheng, Yong Liu, Da-Peng Zhao, Bin Liu, Yan-Ni Tan, Xiao-gang Wang, Han-Chun Tang

Transactions of Nonferrous Metals Society of China

DOI

2019

Effects of Annealing on Microstructure and Mechanical Properties of Metastable Powder Metallurgy CoCrFeNiMo0.2 High Entropy Alloy

Cui Zhang, Bin Liu, Yong Liu, Q. Fang, Wenmin Guo, H. Yang

Entropy

DOI

2019

Identification of Laves phases in a Zr or Hf containing γ-γ′ Co-base superalloy

Li Wang, Lin Song, A. Stark, Yong Liu, M. Oehring, U. Lorenz, F. Pyczak

Journal of Alloys and Compounds

DOI

2019

Bio-mimic Ti–Ta composite with hierarchical “Brick-and-Mortar” microstructure

Sheng-Hang Xu, M. Du, Jia Li, K. Yan, B. Cai, Quanfeng He, Q. Fang, O. Magdysyuk, Bin Liu, Yong Yang, Yong Liu

Materialia

DOI

2019

Phase transition induced high strength and large ductility of a hot rolled near β Ti-5Al-5Mo-5V-1Cr-1Fe alloy

Yanghuanzi Li, Song Ni, Yong Liu, Min Song

Scripta Materialia

DOI

2019

Corrigendum to ‘Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction’ [Acta Mater. 154C (2018) 79–89]

Yi-Qiang Wang, Bin Liu, K. Yan, Min-Shi Wang, S. Kabra, Y. Chiu, D. Dye, P. Lee, Yong Liu, B. Cai

Acta Materialia

DOI

2019

Microstructure and Mechanical Properties of Cold Drawn Ti–Nb–Ta–Zr–O Wires for Orthodontic Applications

Wei-Dong Zhang, Junye Ren, Bin Liu, Yong Liu, Zheng-Qiu Wu, Jingwen Qiu

Metals and Materials International

DOI

2019

A statistical theory of probability-dependent precipitation strengthening in metals and alloys

Q. Fang, Li Li, Jia Li, Hong Wu, Zaiwang Huang, Bin Liu, Yong Liu, P. Liaw

Journal of the mechanics and physics of solids

DOI

2019

Hot Deformation Behavior and Hardness of a CoCrFeMnNi High-Entropy Alloy with High Content of Carbon

Yitao Wang, Jian-Bo Li, Yun-Chang Xin, Xian-Hua Chen, Muhammad Rashad, Bin Liu, Yong Liu

Acta Metallurgica Sinica

DOI

2019

Stress accommodation by α to α″ transformation at the{101¯1}twin boundary in a cold-rolled Ti-5at.% Al alloy

B. Wei, Song Ni, Yong Liu, Min Song

DOI

2019

Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding

Xiao-Fen Li, Ying-Hao Feng, Bin Liu, Deng-Hao Yi, Xiaohui Yang, Wei-Dong Zhang, Gang Chen, Yong Liu, Pei-Kang Bai

Journal of Alloys and Compounds

DOI

2019

Altered microstructural evolution and mechanical properties of CoCrFeNiMo0.15 high-entropy alloy by cryogenic rolling

Wen-Qian Wu, Lin Guo, B. Guo, Yong Liu, Min Song

Materials Science & Engineering: A

DOI

2019

Wear Behavior of P/M High Nb Containing γ-TiAl Alloy in Different Environments

Jingwen Qiu, Zheng Fu, Bin Liu, Yong Liu, Jian-Hui Yan, Di Pan, Wei-Dong Zhang

Metals and Materials International

DOI

2019

Corrigendum to “A review on fundamental of high entropy alloys with promising high–temperature properties” [J. Alloys Compd. 760 (2018) 15–30]

Jian Chen, Xue-Yang Zhou, Wei-Li Wang, Bing-Yao Liu, Yu-Kun Lv, Da-Peng Xu, Wei Yang, Yong Liu

Journal of Alloys and Compounds

DOI

2019

Effects of Al and Mo on high temperature oxidation behavior of refractory high entropy alloys

Yuan-Kui Cao, Yong Liu, Bin Liu, Wei-Dong Zhang, Jiawen Wang, M. Du

Transactions of Nonferrous Metals Society of China

DOI

2019

Effect of Zener–Hollomon parameter on hot deformation behavior of CoCrFeMnNiC0.5 high entropy alloy

Yitao Wang, Jian-Bo Li, Yun-Chang Xin, Chang-Zheng Li, Yao-Qing Cheng, Xian-Hua Chen, Muhammad Rashad, Bin Liu, Yong Liu

DOI

2019

Microstructure, phase stability and element partitioning of γ-γ′ Co-9Al-9W-2X alloys in different annealing conditions

Li Wang, M. Oehring, Yu-Zhi Li, Lin Song, Yong Liu, A. Stark, U. Lorenz, F. Pyczak

Journal of Alloys and Compounds

DOI

2019

Precipitation behavior of selective laser melted FeCoCrNiC0.05 high entropy alloy

Rui Zhou, Yong Liu, Bin Liu, Jia Li, Q. Fang

Intermetallics (Barking)

DOI

2019

Site occupancy of alloying elements in the L12 structure determined by channeling enhanced microanalysis in γ/γ’ Co-9Al-9W-2X alloys

Li Wang, M. Oehring, Yong Liu, U. Lorenz, F. Pyczak

Acta Materialia

DOI

2019

Dynamic tensile behavior of PM Ti−47Al−2Nb−2Cr−0.2W intermetallics at elevated temperatures

Si-hui Ouyang, Bin Liu, Yong Liu, X. Zan, Xiao-Peng Liang, Zheng Li

Transactions of Nonferrous Metals Society of China

DOI

2019

Gradient Distribution of Microstructures and Mechanical Properties in a FeCoCrNiMo High-Entropy Alloy during Spark Plasma Sintering

Mingyang Zhang, Yingbo Peng, Wei Zhang, Yong Liu, Li Wang, Songhao Hu, Yang Hu

Metals

DOI

2019

Microstructure and nanomechanical properties of Zr-based bulk metallic glass composites fabricated by laser rapid prototyping

Hong Wu, Luxin Liang, H. Zeng, Xiao-dong Lan, Jingguang Du, Chengshang Zhou, Yong Liu, Haiou Yang, Jia Li, A. Cai, Qing-xiang Li, Weidong Huang

Materials Science & Engineering: A

DOI

2019

Tuning the mechanical behavior of high-entropy alloys via controlling cooling rates

Jia Li, Haotian Chen, Sixu Li, Q. Fang, Yong Liu, Luxin Liang, Hong Wu, P. Liaw

Materials Science & Engineering: A

DOI

2019

Plastic deformation mechanism of Ti–Nb–Ta–Zr–O alloy at cryogenic temperatures

Wei-Dong Zhang, Zheng-Qiu Wu, Yong Liu, H. Bei, Bin Liu, Jingwen Qiu

Materials Science & Engineering: A

DOI

2019

Effects of niobium particles on the wear behavior of powder metallurgical γ-TiAl alloy in different environments

Jingwen Qiu, Zheng Fu, Bin Liu, Yong Liu, Jian-Hui Yan, Di Pan, Wei-Dong Zhang, I. Baker

Wear

DOI

2019

Isothermal oxidation behavior of TiAl intermetallics with different oxygen contents

Kun Zhao, Si-hui Ouyang, Yong Liu, Bin Liu, Xiao-Peng Liang, Hui-Zhong Li, Yu Wang

Transactions of Nonferrous Metals Society of China

DOI

2018

A review on fundamental of high entropy alloys with promising high–temperature properties

Jian Chen, Xue-Yang Zhou, Weili Wang, Bing-Yao Liu, Yu-Kun Lv, Wei Yang, Da-Peng Xu, Yong Liu

Journal of Alloys and Compounds

DOI

2018

High temperature deformation behavior of carbon-containing FeCoCrNiMn high entropy alloy

Jian-Bo Li, B. Gao, Shan Tang, Bin Liu, Yong Liu, Yitao Wang, Jiawen Wang

DOI

2018

Shear localization of fcc high-entropy alloys

M. Meyers, Ze-Zhou Li, Shi-Teng Zhao, Bingfeng Wang, Yong Liu, P. Liaw

DOI

2018

Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction

Yi-Qiang Wang, Bin Liu, K. Yan, Min-Shi Wang, S. Kabra, Y. Chiu, D. Dye, P. Lee, Yong Liu, B. Cai

Acta Materialia

DOI

2018

Effects of Environment on the Wear Behavior of P/M Ti-47Al-2Cr-0.2Mo

Jingwen Qiu, Di Pan, Yong Liu, I. Baker, Wei-Dong Zhang

DOI

2018

Microstructure and mechanical properties of Ti-15Mo-xTiC composites fabricated by in-situ reactive sintering and hot swaging

Sheng-Hang Xu, Chengshang Zhou, Yong Liu, Bin Liu, Kai-Yang Li

DOI

2018

Microstructure and mechanical properties of FeCoCrNiNb high-entropy alloy coatings

Q. Fang, Yang Chen, Jia Li, Yan-Bin Liu, Yong Liu

Physica. B, Condensed matter

DOI

2018

Formation of Graphite Phase in Powder Metallurgical Ultrahigh Carbon Steels with High Wear Resistance

Liu-Liu Han, Yong Liu, Gang Chen, Kun Li, Jiawen Wang, Rui Zhou

DOI

2018

Microstructural evolution and mechanical properties of Ti–5Al–5Mo–5V–3Cr alloy by heat treatment with continuous temperature gradient

Sheng-Hang Xu, Yong Liu, Bin Liu, Xin Wang, Zhi-Xing Chen

DOI

2018

Transformation induced softening and plasticity in high entropy alloys

Jia Li, Q. Fang, Bin Liu, Yong Liu

DOI

2018

Microstructures and wear behaviour of (FeCoCrNi)1-x(WC)x high entropy alloy composites

Rui Zhou, Gang Chen, Bin Liu, Jiawen Wang, Liu-Liu Han, Yong Liu

International Journal of Refractory Metals and Hard Materials

DOI

2018

Effect of powder oxygen content on the microstructure and properties of Co–Cr dental alloys fabricated by selective laser melting

Wei Zhang, Yujia Li, Songhao Hu, Mingyang Zhang, Song-Jeng Huang, Tian-Yun He, Yong Liu, Yu-Chang Wang

DOI

2018

High Temperature Deformation Behavior of In-Situ Synthesized Titanium-Based Composite Reinforced with Ultra-Fine TiB Whiskers

Rong-Jun Xu, Bin Liu, Yong Liu, Yuan-Kui Cao, Wenmin Guo, Yan Nie, Shi-Feng Liu

Materials

DOI

2018

Compositionally gradient Ti-Ta metal-metal composite with ultra-high strength

Sheng-Hang Xu, Yong Liu, Chao Yang, Henglv Zhao, Bin Liu, Jian-Bo Li, Min Song

DOI

2017

Cooling rate effect on microstructure and mechanical properties of AlxCoCrFeNi high entropy alloys

Yu-Kun Lv, R. Hu, Zhi-Hao Yao, Jian Chen, Da-Peng Xu, Yong Liu, Xinhui Fan

DOI

2017

Effect of C content on microstructure and tensile properties of as-cast CoCrFeMnNi high entropy alloy

Jian Chen, Zhi-Hao Yao, Xiao-Bo Wang, Yu-Kun Lu, Xian-Hui Wang, Yong Liu, Xinhui Fan

DOI

2017

Mo合金FeCoCrNi高エントロピー合金の変形機構:その場中性子回折【Powered by NICT】

B. Cai, Bin Liu, Kabra Saurabh, Yi-Qiang Wang, K. Yan, D. Peter, Yong Liu

2017

Effect of lattice distortion on solid solution strengthening of BCC high-entropy alloys

Zhipeng Wang, Q. Fang, Jia Li, Bin Liu, Yong Liu

DOI

2017

Effects of torsional deformation on the microstructures and mechanical properties of a CoCrFeNiMo0.15 high-entropy alloy

Wen-Qian Wu, Lin Guo, Bin Liu, Song Ni, Yong Liu, Min Song

DOI

2017

Ti36Nb2Ta3Zr O35Oワイヤで強化した新しいチタンマトリックス複合材料【Powered by NICT】

Wei-Dong Zhang, Yong Liu, Bin Liu, Xiao-Feng Li, Hong Wu, Jingwen Qiu

2017

Microstructure and Wear Behavior of FeCoCrNiMo0.2 High Entropy Coatings Prepared by Air Plasma Spray and the High Velocity Oxy-Fuel Spray Processes

Tianchen Li, Yong Liu, Bin Liu, Wenmin Guo, Liyou Xu

DOI

2017

Ultra-High Strength TiC/Refractory High-Entropy-Alloy Composite Prepared by Powder Metallurgy

Bin Liu, Jingshi Wang, Jian Chen, Q. Fang, Yong Liu

DOI

2017

Effects of Pack Rolling Temperature on Microstructure and Mechanical Properties of Powder Metallurgical Ti-45Al-7Nb-0.3W Alloy

Hui-Zhong Li, Ye-Long Qi, Xiao-Peng Liang, Zijun Wang, Feng-Jian Sang, Yong Liu

DOI

2017

Twinning-governed plastic deformation in a thin film of body-centred cubic nanocrystalline ternary alloys at low temperature

Jia Li, Q. Fang, Bin Liu, Yong Liu, Chao Jiang

DOI

2017

Effect of cold working and annealing on microstructure and properties of powder metallurgy high entropy alloy

Bin Liu, Liyou Xu, Yong Liu, Jingshi Wang, Jiawen Wang, Q. Fang

Science China Technological Sciences

DOI

2017

Microstructure characterization and mechanical properties of TiAl-based alloys prepared by mechanical milling and spark plasma sintering

Yan Wang, Chi Zhang, Yong Liu, Shou-Xin Zhao, Jian-Bo Li

DOI

2017

Deformation mechanisms of Mo alloyed FeCoCrNi high entropy alloy: In situ neutron diffraction

B. Cai, Bin Liu, S. Kabra, Yi-Qiang Wang, K. Yan, P. Lee, Yong Liu

DOI

2017

Formation of yittrium oxide in cemented carbides

Xiao-Fen Li, Yong Liu, Teng-Fei Hu, Bin Liu, Cong-zhang Qiu, Zhan-Yong Zhao, Pei-Kang Bai

DOI

2017

Dual mechanisms of grain refinement in a FeCoCrNi high-entropy alloy processed by high-pressure torsion

Wen-Qian Wu, Min Song, Song Ni, Jingshi Wang, Yong Liu, Bin Liu, Xiao-Zhou Liao

Scientific Reports

DOI

2017

高温変形中の粉末冶金CrFeCoNiMo0 2高エントロピー合金の流動挙動と微細構造【Powered by NICT】

Jiawen Wang, Yong Liu, Bin Liu, Yan Wang, Yuan-Kui Cao, Tianchen Li, Rui Zhou

2017

Composite material of high-entropy alloy holding abrasive particle as well as preparation method and application thereof

Wei Zhang, Yong Liu, Mingyang Zhang, Bin Liu, Jingshi Wang

2017

Microstructural characteristics and densification behavior of high-Nb TiAl powder produced by plasma rotating electrode process

Wei-Wei He, Yong Liu, Hui-Ping Tang, Yunping Li, Bin Liu, Xiao-Peng Liang, Zheng-ping Xi

DOI

2016

Retraction Note to: Ultra-High Strength and Ductile Lamellar-Structured Powder Metallurgy Binary Ti-Ta Alloys

Yong Liu, Sheng-Hang Xu, Xin Wang, Kai-Yang Li, Bin Liu, Hong Wu, Hui-Ping Tang

DOI

2016

Microstructural evolution in a powder metallurgical Ti-7Mo alloy with continuous oxygen gradient

Zhi-Xing Chen, Bin Liu, Yong Liu, Fanpei Zeng, Jinzhong Lu

DOI

2016

Ti‐Nb‐Ta‐Zr‐O合金の室温クリープ挙動【Powered by NICT】

Wei-Dong Zhang, Yong Liu, Hong Wu, Xiao-dong Lan, Jingwen Qiu, Teng-Fei Hu, Hui-Ping Tang

2016

Effects of aspect ratio and loading rate on room-temperature mechanical properties of Cu-based bulk metallic glasses

A. Cai, Yong Liu, Hong Wu, D. Ding, W. An, Guo-Jun Zhou, Yun Luo, Yongyi Peng, Xiao-song Li

DOI

2016

RETRACTED ARTICLE: Ultra-High Strength and Ductile Lamellar-Structured Powder Metallurgy Binary Ti-Ta Alloys

Yong Liu, Sheng-Hang Xu, Xin Wang, Kai-Yang Li, Bin Liu, Hong Wu, Hui-Ping Tang

JOM

DOI

2016

金属ガラスの室温機械的性質に及ぼすアスペクト比と負荷速度の影響を研究した。【JST・京大機械翻訳】

An-Hui Cai, Yong Liu, Hong Wu, D. Ding, W. An, Guo-Jun Zhou, Yun Luo, Yongyi Peng, Xiao-song Li

2016

Mechanical behaviors of AlCrFeCuNi high-entropy alloys under uniaxial tension via molecular dynamics simulation

Jia Li, Q. Fang, Bin Liu, Youwen Liu, Yong Liu

DOI

2016

Diffusion bonding of Ti-45Al-7Nb-0.3W alloy by spark plasma sintering

Kun Zhao, Yong Liu, Lan Huang, Bin Liu, Yue-Hui He

DOI

2016

Ultrahigh Oxidation Resistance and High Electrical Conductivity in Copper-Silver Powder

Jia-xin Li, Yun-Ping Li, Zhongchang Wang, Hua-Kang Bian, Yuhang Hou, Feng-Lin Wang, Guo Xu, Bin Liu, Yong Liu

Scientific Reports

DOI

2016

Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases

W.-H. Liu, Zhao-Ping Lu, Junyang He, Jun-Hua Luan, Zhi-Tai Wang, Bin Liu, Yong Liu, Ming-Wei Chen, C.-T. Liu

DOI

2016

粉末押出により調製した等モルFeCoCrNi高エントロピー合金の微細構造と機械的性質【Powered by NICT】

Bin Liu, Jingshi Wang, Yong Liu, Qing-Hong Fang, Yuan Wu, Shi-Qi Chen, C.-T. Liu

2016

Microstructures and tribological properties of laser cladded Ti-based metallic glass composite coatings

Xiao-dong Lan, Hong Wu, Yong Liu, Wei-Dong Zhang, Rui-Di Li, Shi-Qi Chen, Xiongfei Zai, Teng-Fei Hu

DOI

2016

Surface nanocrystallization of Ti–45Al–7Nb–0.3W intermetallics induced by surface mechanical grinding treatment

Kun Zhao, Yong Liu, T. Yao, Bin Liu, Yue-Hui He

DOI

2016

Effects of submicron WC addition on structures, kinetics and mechanical properties of functionally graded cemented carbides with coarse grains

Xiao-Fen Li, Yong Liu, Bin Liu, Jian-Hua Zhou

DOI

2016

Microstructure and mechanical properties of equimolar FeCoCrNi high entropy alloy prepared via powder extrusion

Bin Liu, Jingshi Wang, Yong Liu, Q. Fang, Yuan Wu, Shi-Qi Chen, C.-T. Liu

DOI

2016

Preparation of superfine-grained high entropy alloy by spark plasma sintering gas atomized powder

Yong Liu, Jingshi Wang, Q. Fang, Bin Liu, Yuan Wu, Shi-Qi Chen

DOI

2016

A Series of Zr-Based Bulk Metallic Glasses with Room Temperature Plasticity

A. Cai, D. Ding, Yong Liu, Hong Wu, W. An, Guo-Jun Zhou, Yun Luo, Yongyi Peng

Materials

DOI

2016

Room temperature creep behavior of Ti–Nb–Ta–Zr–O alloy

Wei-Dong Zhang, Yong Liu, Hong Wu, Xiao-dong Lan, Jingwen Qiu, Teng-Fei Hu, Hui-Ping Tang

DOI

2016

Fabrication, tribological and corrosion behaviors of detonation gun sprayed Fe-based metallic glass coating

Hong Wu, Xiao-dong Lan, Yong Liu, Fei Li, Wei-Dong Zhang, Zi-jin Chen, Xiongfei Zai, H. Zeng

DOI

2016

Effects of cold rolling and subsequent annealing on the microstructure of a HfNbTaTiZr high-entropy alloy

Wen-Qian Wu, Song Ni, Yong Liu, Min Song

DOI

2015

Phase formation, glass forming ability, mechanical and thermal properties of Cu50Zr50−xAlx (0⩽x⩽11.0) glass forming alloys

A. Cai, Yong Liu, Hong Wu, D. Ding, W. An, Guo-Jun Zhou, Yun Luo, Yongyi Peng

Science China Materials

DOI

2015

Elastic modulus of phases in Ti–Mo alloys

Wei-Dong Zhang, Yong Liu, Hong Wu, Min Song, Tuo-Yang Zhang, Xiao-dong Lan, T. Yao

DOI

2015

Densification and microstructural evolution of a high niobium containing TiAl alloy consolidated by spark plasma sintering

Jiawen Wang, Yan Wang, Yong Liu, Jian-Bo Li, Long-Ze He, Chi Zhang

DOI

2015

Characterization of phase transformation during hot compressive deformation in a β-stabilized Ti–45Al–7Nb–0.4W–0.15B alloy

Bin Liu, Yong Liu, Lan Huang, Hui-Zhong Li, Yue-Hui He

DOI

2015

Powder metallurgy titanium aluminide alloys

Bin Liu, Yong Liu

DOI

2015

Growth of diamond coatings on functionally graded cemented carbides

Yong Liu, M. Du, Mingyang Zhang, Qiu-Ping Wei, Zhi-Ming Yu, Xiao-Fen Li

DOI

2015

Influence of carburization on oxidation behavior of High Nb contained TiAl alloy

T. Yao, Yong Liu, Bin Liu, Min Song, Kun Zhao, Wei-Dong Zhang, Yue-Hui He

DOI

2015

Grain growth behavior of an as-drawn 316L stainless steel fiber after annealing treatment

Haiou Yu, Yan Wang, Yong Liu, Hui-Ping Tang

DOI

2015

Oxidation behaviors of porous Haynes 214 alloy at high temperatures

Yan Wang, Yong Liu, Hui-Ping Tang, Weijie Li

DOI

2014

An investigation of the mechanical behaviors of micro-sized tungsten whiskers using nanoindentation

Guangyu Liu, Min Song, Xin-Li Liu, Song Ni, Shiliang Wang, Yue-Hui He, Yong Liu

DOI

2014

Effect of Nb particles on the flow behavior of TiAl alloy

Jian-Bo Li, Yong Liu, Bin Liu, Yan Wang, Kun Zhao, Yue-Hui He

DOI

2014

Microstructure characterization and mechanical behaviors of a hot forged high Nb containing PM-TiAl alloy

Jian-Bo Li, Yong Liu, Bin Liu, Yan Wang, Xiao-Peng Liang, Yue-Hui He

DOI

2014

Ti-47Al-2Cr-2Nb-0.2W合金微观组织对其阻尼性能的影响

Wu Zeng, Hui-Zhong Li, Yong Liu, Meng-Li Jiang, Xiao-Peng Liang, Zhong-Wei Wei

2014

Compositional optimization of glass forming alloys based on critical dimension by using artificial neural network

A. Cai, X. Xiong, Yong Liu, W. An, Guo-Jun Zhou, Yun Luo, T. Li, Xiao-song Li, Xiang-Fu Tan

DOI

2014

High temperature deformation behavior of near γ-phase high Nb-containing TiAl alloy

Jian-Bo Li, Yong Liu, Bin Liu, Yan Wang, P. Cao, Canxu Zhou, Chun-Jie Xiang, Yue-Hui He

DOI

2014

Dynamic recrystallization behavior of an as-cast TiAl alloy during hot compression

Jian-Bo Li, Yong Liu, Yan Wang, Bin Liu, Yue-Hui He

DOI

2014

Microstructure characteristic for high temperature deformation of powder metallurgy Ti-47Al-2Cr-0.2Mo alloy

Dan-yang Zhang, Hui-Zhong Li, Xiao-Peng Liang, Zhong-Wei Wei, Yong Liu

DOI

2014

细晶Ti-6Al-4V合金的超塑性变形行为与组织演变

Tuo-Yang Zhang, Yong Liu, Bin Liu, Canxu Zhou

2014

Casting effect on compressive brittleness of bulk metallic glass

Hong Wu, Yong Liu, Kai-Yang Li, Zhong-Wei Zhao

DOI

2014

Effect of addition of metal carbide on the oxidation behaviors of titanium matrix composites

Yanbin Liu, Yong Liu, Zhong-Wei Zhao, Yan-Hui Chen, Hui-Ping Tang

DOI

2014

热变形粉末冶金Ti-45Al-7Nb-0.3W合金热处理过程的组织演变

Kun Zhao, Yong Liu, Lan Huang, Bin Liu, Jian-Bo Li, Xiao-Peng Liang, Yue-Hui He

2014

Effect of carbon on microstructures of Ti-45Al-3Fe-2Mo-xC alloy

Canxu Zhou, Bin Liu, Yong Liu, Cong-zhang Qiu, Yue-Hui He

DOI

2013

Evolution of lamellar structure in Ti-47A1-2Nb-2Cr-0.2W alloy sheet

Xiao-Peng Liang, Bin Lu, Yue-Hui He, Lan Huang, Hui-Zhong Li, Yong Liu, Bin Liu

2013

Oxidation behaviors of Ni-Cr-Al superalloy foams at 1 000 °C in air

Hui-Ping Tang, Yan Wang, Yong Liu, Weijie Li, Chao Han

DOI

2013

Structural and thermal sensitivity of Cu-Zr-Ti amorphous alloys to tension

A. Cai, X. Xiong, Yong Liu, W. An, Guo-Jun Zhou, Yun Luo, Tielin Li, Xiao-song Li

DOI

2013

Constitutive equation and processing map for hot compressed as-cast Ti-43Al-4Nb-1.4W-0.6B alloy

Jian-Bo Li, Yong Liu, Yan Wang, Bin Liu, B. Lu, Xiao-Peng Liang

DOI

2013

Zr-Al-Ni-Cu glass forming alloys with low fragility parameters

W. An, X. Xiong, Yong Liu, A. Cai, Guo-Jun Zhou, Yun Luo, T. Li, Xiao-song Li

DOI

2013

Ti-47Al-2Nb-2Cr-0.2W合金板材中层片结构的演化（英文）

B. Lu, Lan Huang, Yong Liu, Xiao-Peng Liang, Bin Liu, Yue-Hui He, Hui-Zhong Li

2013

Microstructures and mechanical properties of a Cu-bearing ODS steel fabricated by mechanical alloying and hot extrusion

Yu-Hai Dou, Yong Liu, Feng Liu, Jing Fang, Yu-Ren Wen, Da-Peng Zhao, N. Song

DOI

2013

Tribological studies of a Zr-based bulk metallic glass

Hong Wu, I. Baker, Yong Liu, Xiao-Lan Wu, P. Munroe, Jian-Gang Zhang

DOI

2013

Nanoindentation creep of ultrafine-grained Al2O3 particle reinforced copper composites

Min Song, Yong Liu, Xiao-Yu He, H. Bei, Wei-Ping Hu, Feng Liu, Zhou Li

DOI

2012

Preparation method of large-size thin plate of niobium-containing titanium-aluminum based alloy by powder metallurgy

Yong Liu, B. Lu, Canxu Zhou, Yang Song, Hui-Zhong Li, Xiao-Peng Liang, Bo-Yun Huang, Lan Huang

2012

Preparation method of powder metallurgy superfine crystal titanium aluminum base alloy panel

Yong Liu, Canxu Zhou, Min Zeng, Jian-Bo Li, Hui-Zhong Li, Xiao-Peng Liang, Bo-Yun Huang, Lan Huang

2012

Tuning mechanical properties for β(B2)-containing TiAl intermetallics

Cong-zhang Qiu, Yong Liu, Lan Huang, Bin Liu, Wei Zhang, Yue-Hui He, Baiyun Huang

DOI

2012

热包套锻造过程中P/M钛铝合金动态行为的数值模拟与物理分析（英文）

Wei Zhang, Yong Liu, Li Wang, Bin Liu

2012

Enhanced Grain Refinement Through Deformation Induced α Precipitation in Hot Working of α + β Titanium Alloy

Bin Liu, Yun-Ping Li, H. Matsumoto, Y. Koizumi, Yong Liu, A. Chiba

DOI

2012

Flow behavior and processing map of PM Ti−47Al−2Cr−0.2Mo alloy

Hui-Zhong Li, M. Zeng, Xiao-Peng Liang, Zhou Li, Yong Liu

DOI

2012

热处理消除铸态TiAl基合金组织中的β（B2）相

Yan-Bin Liu, B. Lu, Jian-Bo Li, Yong Liu, Bin Liu, Yan Wang, Xiao-Peng Liang

2012

Dynamic Phase Transformation during Hot-Forging Process of a Powder Metallurgy α+β Titanium Alloy

B. Liu, H. Matsumoto, Yun-Ping Li, Y. Koizumi, Yong Liu, A. Chiba

DOI

2012

Development of a Nb-free TiAl-based intermetallics with a low-temperature superplasticity

Cong-zhang Qiu, Yong Liu, Wei Zhang, Bin Liu, Xiao-Peng Liang

DOI

2012

Effect of trace boron element on microstructure and hot deformation behaviors of as-cast TiAl based alloy

Jian-Bo Li, Yong Liu, Bin Liu, Guang-Yun Yang, Yan Wang

2012

Numerical simulation and physical analysis for dynamic behaviors of P/M TiAl alloy in hot-packed forging process

Wei Zhang, Yong Liu, Li Wang, Bin Liu

DOI

2012

Numerical Simulation for Processing Windows of TiAl Alloys During Hot Forging

Li Wang, Yong Liu, Wei Zhang, Hui Wang

DOI

2012

Constitutive relationship for high temperature deformation of powder metallurgy Ti-47Al-2Cr-2Nb-0.2W alloy

Xiao-Peng Liang, Yong Liu, Hui-Zhong Li, Canxu Zhou, Guofu Xu

DOI

2012

Rare Earth Element: Is it a Necessity for PM Ti Alloys?

Yong Liu, Y. Liu, Bin Wang, Hui-Ping Tang

DOI

2011

Optimization of pack parameters for hot deformation of TiAl alloys

Li Wang, Yong Liu, Zhang Wei, Hui Wang, Qi Li

DOI

2011

Numerical Simulation and Defects Analyses of Titanium Aluminide Based Alloys Powder Forging

Wei Zhang, Yong Liu, Mingyang Zhang

DOI

2011

Microstructure and tensile properties of containerless near-isothermally forged TiAl alloys

Wei-Wei He, Hui-Ping Tang, Hai-Yan Liu, W. Jia, Yong Liu, Xin Yang

DOI

2011

Microstructural evolution of (TiAl)+Nb+W+B alloy

Lan Huang, P. Liaw, C.-T. Liu, Yong Liu, Jin-Song Huang

DOI

2010

Deformability and microstructure transformation of PM TiAl alloy prepared by pseudo-HIP technology

Wei Zhang, Yong Liu, Bin Liu, Hui-Zhong Li, B. Tang

2010

High temperature deformability and microstructural evolution of Ti–47Al–2Cr–0.2Mo alloy

Hui-Zhong Li, Zhou Li, Wei Zhang, Yan Wang, Yong Liu, Hai-Jun Wang

DOI

2010

Development of Constitutive Relationship for the Hot Deformation of Ti-47Al-2Cr-2Nb-0.2W Alloy

Hui Wang, Yong Liu, Wei Zhang, Li Wang, Bin Liu

DOI

2010

粉末冶金Ti-1.5Fe-2.25Mo钛合金的热变形本构方程

Jingwen Qiu, Yong Liu, Yanbin Liu, Bin Liu, Bin Wang, Yu-Lin Wang, Hui-Ping Tang, Xue-Qing Wang

2009

Microstructural Revolution of TiAl by Different Casting Method

Jin-Song Huang, Bin Liu, Yong-Hong Zhang, Wei Zhang, Xiao-Yu He, Yong Liu, Yue-Hui He, Baiyun Huang

2009

Ti-Al-Nb-W-B合金铸态组织的优化及β（B2）相的消除

Wei Zhang, Yong Liu, Jin-Song Huang, Bin Liu, Yue-Hui He, Bo-Yun Huang

2009

Investigation on the Microstructure Homogenization in a TiAl Based Alloy Prepared by Elemental Powder Metallurgy

Yong Liu, Baiyun Huang, Yue-Hui He, Jian-Nong Wang

2009

Optimization of Microstructure and Elimination of β(B2) Phase in As-Cast Ti-Al-Nb-W-B Alloy

Wei Zhang, Yong Liu, Jin-Song Huang, Bin Liu, Yue-Hui He, Bo-Yun Huang

DOI

2009

Processing TiAl-Based Alloy by Elemental Powder Metallurgy

Yong Liu, Baiyun Huang, Yue-Hui He, K. Zhou

2008

Low cycle fatigue improvement of powder metallurgy titanium alloy through thermomechanical treatment

Bin Liu, Yong Liu, Xiao-Yu He, Hui-Ping Tang, Li-Fang Chen

DOI

2008

Effects of Nb and Si on high temperature oxidation of TiAl

Hui-Ping Jiang, Zhong-lei Wang, Wen-shuai Ma, Xiaoxia Feng, Zi-Qiang Dong, Liang Zhang, Yong Liu

DOI

2007

Simulation of hot compression of Ti–Al alloy

Jin-Song Huang, Lan Huang, Bin Liu, Yong-Hong Zhang, Wei Zhang, Xiao-Yu He, Yong Liu

DOI

2007

Effect of trace tungsten on the microstructure of TiAl alloys containing Nb and B

Bin Liu, Yong Liu, H. Lan, Jin-Song Huang, Yong-Hong Zhang, Bo-Yun Huang

DOI

2006

Application of phase diagram calculation to TiAl-based intermetallics microstructure design

Yong Liu

2006

Effect of pressing pressure on pore structure and filtering performance in porous TiAl alloy

Yong Liu

2006

Design of powder metallurgy titanium alloys and composites

Yong Liu, Liang Chen, H.-P. Tang, C.-T. Liu, Bin Liu, Bo-Yun Huang

DOI

2006

钨对1295℃／10h热处理后Ti-Al-Nb-W-B合金微观组织的影响

Jin-Song Huang, Yong-Hong Zhang, Bin Liu, Wei Zhang, Yong Liu, Yue-Hui He, Bo-Yun Huang

2006

Improvement of Ductility of Powder Metallurgy Titanium Alloys by Addition of Rare Earth Element

Yong Liu, Li-Fang Chen, Weifeng Wei, Hui-Ping Tang, Bin Liu, Baiyun Huang

2005

热处理工艺对Ti-45Al-7Nb-0．15B-0．7W合金微观组织的影响

Jin-Song Huang, Yong Liu, Yue-Hui He, Yong-Hong Zhang, Bin Liu, Bin Ren, Bo-Yun Huang

2004

Powder metallurgy method of granule intensified titanium-base compound material

Hui-Ping Tang, Hai-Yan Liu, Yuan Huang, Yong Liu, Li-Fang Chen

2004

Numerical simulation on influence of loading ways of powder on titanium powder compaction

Yong Liu

2004

Development and application of powder metallurgy titanium alloys in automobile industry

Yong Liu

2003

Microstructures and mechanical behavior of PM Ti-Mo alloy

Yong Liu, Weifeng Wei, K. Zhou, Li-Fang Chen, Huixiang Tang

DOI

2002

Synthesis of amorphous Ti—Al alloys by mechanical alloying of elemental powders

Jun-Hong Zhang, Bo-Yun Huang, Yue-Hui He, Ke-Chao Zhou, Yong Liu

2002

A Novel near Net—Shape Technique for P／M Parts with Large H／D Ratio

Yong Liu, Baiyun Huang

2002

Effects of can parameters on canned—forging process of TiAl base alloy（I）——Microstructural analyses

Yong Liu, Wei-Feng Wei

2002

Effects of can parameters on canned—forging process of TiAl base alloy（II）——Mechanical behavior

Yong Liu, Shuang He, Bo-Yun Huang, Wei-Feng Wei, Yue-Hui He, K. Zhou

2001

Microstructural evolution of TiAl base alloy during three-stepped thermo-mechanical treatment

Yong Liu, Feng-Xiao Liu, Baiyun Huang, K. Zhou, Chuan-Fu Zhang

DOI

2001

Effect of Al content on the lamellar spacing in two-phase TiAl alloys

Jiancheng Tang, Baiyun Huang, K. Zhou, Wen-Sheng Liu, Yong Liu, Yue-Hui He

DOI

2000

Superplastic behavior of a TiAl-based alloy

Baiyun Huang, Zhong-Yong Deng, Yong Liu, X. Qu, Yue-Hui He

DOI

1998

Heat treatment behavior of can-forged titanium aluminide alloy in (α+γ) region

Yong Liu, Baiyun Huang, Yue-Hui He, Zhong-Yong Deng

DOI

1998

SOLID-STATE JOINING OF TiAl BASED ALLOYS

Yue-Hui He, Baiyun Huang, Bin Wang, Yong Liu, Harbin

预印本

2026

Symmetry-Protected Minimum of Four Conventional Weyl Points in Nonmagnetic Crystals

Ze-Xin Xue, Ke-Xin Pang, Yun-Yun Bai, Yanfeng Ge, Yong Liu, Yan Gao

arXiv preprint

2026

Quantum LiDAR with non-local modulation

Xiao-Dong Fan, Zhong-Hua Ou, Yun-Ru Fan, Kai Guo, Zong-Liang Xie, Qiang Qi, Li-Xun Zhang, Si Shen, Hai-Zhi Song, Yan-Yu Wei, Hao Li, Li-Xing You, Qi Zhang, Yong Liu, Guang-Can Guo, Qiang Zhou

arXiv preprint

2026

State-Space Model-Enabled Reinforcement Learning for Magnetic Configuration Controlon EXL-50U

Pei Guo, Zhengyuan Chen, Jianguo Chen, Xuanhe Wang, Guoyang Shi, Siqi Ding, Yapeng Zhang, Lei Xing, Yong Liu, Xiang Gu, Tiantian Sun, Xiuchun Lun, Jia Li, Zhengxiong Wang, Huasheng Xie, Hanyue Zhao, Yuejiang Shi, Xianming Song, Tianyuan Liu, EXL-50U Team

arXiv preprint

2025

Simulation Studies of the Effect of SiPM Dark Noise on the Performance of a Highly Granular Crystal ECAL

Jack Rolph, Yong Liu, Baohua Qi, Zhiyu Zhao

arXiv preprint

2025

Measurements on Time Resolution of BGO, PWO and BSO Crystals

Zhiyu Zhao, Dejing Du, Yong Liu, Jiyuan Chen, Junfeng Chen, Fangyi Guo, Shu Li, Baohua Qi

arXiv preprint

2025

High-Efficiency Nonrelativistic Charge-Spin Conversion in X-Type Antiferromagnets

Jiabin Wang, Wancheng Zhang, Zhenhua Zhang, Rui Xiong, Yong Liu, Zhihong Lu

arXiv preprint

2025

Near-room-temperature antiferromagnetism in Janus Fe$X$F ($X$ = O, S) monolayers

Xixiang Zhang, Busheng Wang, Yanfeng Ge, Yong Liu, Wenhui Wan

arXiv preprint

2024

Muon beamtest results of high-density glass scintillator tiles

Dejing Du, Yong Liu, Hua Cai, Danping Chen, Zhehao Hua, Jifeng Han, Jifeng Han, Baohua Qi, Sen Qian, Jing Ren, Xinyuan Sun, Xinyuan Sun, Dong Yang, Shenghua Yin, Minghui Zhang

arXiv preprint

2024

First-principles Study of Carrier Mobility in MX (M=Sn, Pb; X=P, As) Monolayers

Bo Zhang, Wenhui Wan, Yong Liu, Yanfeng Ge

arXiv preprint

2024

Superband: an Electronic-band and Fermi surface structure database of superconductors

Tengdong Zhang, Chenyu Suo, Yanling Wu, Xiaodan Xu, Yong Liu, Dao-Xin Yao, Jun Li

arXiv preprint

DOI

2024

Flavor Physics at the CEPC: a General Perspective

Xiaocong Ai, Wolfgang Altmannshofer, Peter Athron, Xiaozhi Bai, Lorenzo Calibbi, Lu Cao, Yuzhi Che, Chunhui Chen, Ji-Yuan Chen, Long Chen, Mingshui Chen, Shanzhen Chen, Xuan Chen, Shan Cheng, Cheng-Wei Chiang, Andreas Crivellin, Hanhua Cui, Olivier Deschamps, Sébastien Descotes-Genon, Xiaokang Du, Shuangshi Fang, Yu Gao, Yuanning Gao, Li-Sheng Geng, Pablo Goldenzweig, Jiayin Gu, Feng-Kun Guo, Yuchen Guo, Zhi-Hui Guo, Tao Han, Hong-Jian He, Jibo He, Miao He, Xiaogang He, Yanping Huang, Gino Isidori, Quan Ji, Jianfeng Jiang, Xu-Hui Jiang, Jernej F. Kamenik, Tsz Hong Kwok, Gang Li, Geng Li, Haibo Li, Haitao Li, Hengne Li, Honglei Li, Liang Li, Lingfeng Li, Qiang Li, Qiang Li, Shu Li, Xiaomei Li, Xin-Qiang Li, Yiming Li, Yubo Li, Yuji Li, Zhao Li, Hao Liang, Zhijun Liang, Libo Liao, Zoltan Ligeti, Jia Liu, Jianbei Liu, Tao Liu, Yi Liu, Yong Liu, Zhen Liu, Xinchou Lou, Peng-Cheng Lu, Alberto Lusiani, Hong-Hao Ma, Kai Ma, Farvah Mahmoudi, Yajun Mao, Yaxian Mao, David Marzocca, Juan-Juan Niu, Soeren Prell, Huirong Qi, Sen Qian, Zhuoni Qian, Qin Qin, Ariel Rock, Jonathan L. Rosner, Manqi Ruan, Dingyu Shao, Chengping Shen, Xiaoyan Shen, Haoyu Shi, Liaoshan Shi, Zong-Guo Si, Cristian Sierra, Huayang Song, Shufang Su, Wei Su, Zhijia Sun, Michele Tammaro, Dayong Wang, En Wang, Fei Wang, Hengyu Wang, Jian Wang, Jianchun Wang, Kun Wang, Lian-Tao Wang, Wei Wang, Xiaolong Wang, Xiaoping Wang, Yadi Wang, Yifang Wang, Yuexin Wang, Xing-Gang Wu, Yongcheng Wu, Rui-Qing Xiao, Ke-Pan Xie, Yuehong Xie, Zijun Xu, Haijun Yang, Hongtao Yang, Lin Yang, Shuo Yang, Zhongbao Yin, Fusheng Yu, Changzheng Yuan, Xing-Bo Yuan, Xuhao Yuan, Chongxing Yue, Xi-Jie Zhan, Hong-Hao Zhang, Kaili Zhang, Liming Zhang, Xiaoming Zhang, Yang Zhang, Yanxi Zhang, Ying Zhang, Yongchao Zhang, Yu Zhang, Zhen-Hua Zhang, Zhong Zhang, Mingrui Zhao, Qiang Zhao, Xu-Chang Zheng, Yangheng Zheng, Chen Zhou, Daicui Zhou, Pengxuan Zhu, Yongfeng Zhu, Xuai Zhuang, Xunwu Zuo, Jure Zupan

arXiv preprint

DOI

2023

Deep learning inter-atomic potential for irradiation damage in 3C-SiC

Yong Liu, Hao Wang, Linxin Guo, Zhanfeng Yan, Jian Zheng, Wei Zhou, Jianming Xue

arXiv preprint

2023

Predicting Fatigue Crack Growth via Path Slicing and Re-Weighting

Yingjie Zhao, Yong Liu, Zhiping Xu

arXiv preprint

DOI

2023

The unexpected magnetism in 2D group-IV-doped GaN for spintronic applications

Rui Zhao, Rui Guo, Yanfeng Ge, Yong Liu, Wenhui Wan

arXiv preprint

DOI

2023

Realization of multiple topological states and topological phase transitions in (4,0) carbon nanotube derivatives

Yan Gao, Yu Du, Yun-Yun Bai, Weikang Wu, Qiang Wang, Yong Liu, Kai Liu, Zhong-Yi Lu

arXiv preprint

DOI

2021

Strain Tunable Intrinsic Ferromagnetic in 2D Square CrBr$_2$

Fei Li, Yulu Ren, Wenhui Wan, Yong Liu, Yanfeng Ge

arXiv preprint

DOI

2020

High Curie Temperature Ferromagnetic Semiconductor: Bimetal Transition Iodide V$_2$Cr$_2$I$_9$

Yulu Ren, Qiaoqiao Li, Wenhui Wan, Yong Liu, Yanfeng Ge

arXiv preprint

2020

High-Temperature Ferromagnetic Semiconductors: Janus Monolayer Vanadium Trihalides

Yulu Ren, Qiaoqiao Li, Wenhui Wan, Yong Liu, Yanfeng Ge

arXiv preprint

DOI

2020

A new family of disorder-free Rare-Earth-based kagomé lattice magnets: structure and magnetic characterizations of RE3BWO9 (RE=Pr, Nd, Gd-Ho) Boratotungstates

Malik Ashtar, Jinjin Guo, Zongtang Wan, Yongqiang Wang, Gaoshang Gong, Yong Liu, Yuling Su, Zhaoming Tian

arXiv preprint

2018

Effects of layer stacking and strain on electronic transport in 2D tin monoxide

Yanfeng Ge, Yong Liu

arXiv preprint

DOI

2017

Dependence of the absolute value of the penetration depth in $\mathrm{\mathbf{{(Ba_{1-x}K_x)Fe_2As_2}}}$ on doping

Avior Almoalem, Alon Yagil, Kyuil Cho, Serafim Teknowijoyo, Makariy A. Tanatar, Ruslan Prozorov, Yong Liu, Thomas A. Lograsso, Ophir M. Auslaender

arXiv preprint

DOI

2014

Magnetic excitations and anomalous spin wave broadening in multiferroic FeV2O4

Qiang Zhang, Mehmet Ramazanoglu, Songxue Chi, Yong Liu, Thomas. A. Lograsso, David Vaknin

arXiv preprint

DOI

2012

Precision measurement of the branching fractions of J/psi -> pi+pi-pi0 and psi' -> pi+pi-pi0

BESIII Collaboration, M. Ablikim, M. N. Achasov, D. J. Ambrose, F. F. An, Q. An, Z. H. An, J. Z. Bai, R. B. F. Baldini Ferroli, Y. Ban, J. Becker, N. Berger, M. B. Bertani, J. M. Bian, E. Boger, O. Bondarenko, I. Boyko, R. A. Briere, V. Bytev, X. Cai, A. C. Calcaterra, G. F. Cao, J. F. Chang, G. Chelkov, G. Chen, H. S. Chen, J. C. Chen, M. L. Chen, S. J. Chen, Y. Chen, Y. B. Chen, H. P. Cheng, Y. P. Chu, D. Cronin-Hennessy, H. L. Dai, J. P. Dai, D. Dedovich, Z. Y. Deng, G. Denig, I. Denysenko, M. Destefanis, W. M. Ding Ding, Y. Ding, L. Y. Dong, M. Y. Dong, S. X. Du, J. Fang, S. S. Fang, L. Fava, F. Feldbauer, C. Q. Feng, C. D. Fu, J. L. Fu, Y. Gao, C. Geng, K. Goetzen, W. X. Gong, M. Greco, M. H. Gu, Y. T. Gu, Y. H. Guan, A. Q. Guo, L. B. Guo, Y. P. Guo, Y. L. Han, X. Q. Hao, F. A. Harris, K. L. He, M. He, Z. Y. He, T. Held, Y. K. Heng, Z. L. Hou, H. M. Hu, J. F. Hu, T. Hu, B. Huang, G. M. Huang, J. S. Huang, X. T. Huang, Y. P. Huang, T. Hussain, C. S. Ji, Q. Ji, X. B. Ji, X. L. Ji, L. K. Jia, L. L. Jiang, X. S. Jiang, J. B. Jiao, Z. Jiao, D. P. Jin, S. Jin, F. F. Jing, N. Kalantar-Nayestanaki, M. Kavatsyuk, W. Kuehn, W. Lai, J. S. Lange, J. K. C. Leung, C. H. Li, Cheng Li, Cui Li, D. M. Li, F. Li, G. Li, H. B. Li, J. C. Li, K. Li, Lei Li, N. B. Li, Q. J. Li, S. L. Li, W. D. Li, W. G. Li, X. L. Li, X. N. Li, X. Q. Li, X. R. Li, Z. B. Li, H. Liang, Y. F. Liang, Y. T. Liang, G. R. Liao, X. T. Liao, B. J. Liu, B. J. Liu, C. L. Liu, C. X. Liu, C. Y. Liu, F. H. Liu, Fang Liu, Feng Liu, H. Liu, H. B. Liu, H. H. Liu, H. M. Liu, H. W. Liu, J. P. Liu, K. Liu, K. Liu, K. Y. Liu, S. B. Liu, X. Liu, X. H. Liu, Y. B. Liu, Yong Liu, Z. A. Liu, Zhiqiang Liu, Zhiqing Liu, H. Loehner, G. R. Lu, H. J. Lu, J. G. Lu, Q. W. Lu, X. R. Lu, Y. P. Lu, C. L. Luo, M. X. Luo, T. Luo, X. L. Luo, M. Lv, C. L. Ma, F. C. Ma, H. L. Ma, Q. M. Ma, S. Ma, T. Ma, X. Y. Ma, F. E. Maas, M. Maggiora, Q. A. Malik, H. Mao, Y. J. Mao, Z. P. Mao, J. G. Messchendorp, J. Min, T. J. Min, R. E. Mitchell, X. H. Mo, C. Motzko, N. Yu. Muchnoi, Y. Nefedov, I. B. Nikolaev, Z. Ning, S. L. Olsen, Q. Ouyang, S. P. Pacetti, J. W. Park, M. Pelizaeus, K. Peters, J. L. Ping, R. G. Ping, R. Poling, C. S. J. Pun, M. Qi, S. Qian, C. F. Qiao, X. S. Qin, Y. Qin, Z. H. Qin, J. F. Qiu, K. H. Rashid, G. Rong, X. D. Ruan, A. Sarantsev, J. Schulze, M. Shao, C. P. Shen, X. Y. Shen, H. Y. Sheng, M. R. Shepherd, X. Y. Song, S. Spataro, B. Spruck, D. H. Sun, G. X. Sun, J. F. Sun, S. S. Sun, X. D. Sun, Y. J. Sun, Y. Z. Sun, Z. J. Sun, Z. T. Sun, C. J. Tang, X. Tang, E. H. Thorndike, H. L. Tian, D. Toth, M. U. Ulrich, G. S. Varner, B. Wang, B. Q. Wang, K. Wang, L. L. Wang, L. S. Wang, M. Wang, P. Wang, P. L. Wang, Q. Wang, Q. J. Wang, S. G. Wang, X. F. Wang, X. L. Wang, Y. D. Wang, Y. F. Wang, Y. Q. Wang, Z. Wang, Z. G. Wang, Z. Y. Wang, D. H. Wei, Q. G. Wen, S. P. Wen, M. W. Werner, U. Wiedner, L. H. Wu, N. Wu, S. X. Wu, W. Wu, Z. Wu, L. G. Xia, Z. J. Xiao, Y. G. Xie, Q. L. Xiu, G. F. Xu, G. M. Xu, H. Xu, Q. J. Xu, X. P. Xu, Y. Xu, Z. R. Xu, F. Xue, Z. Xue, L. Yan, W. B. Yan, Y. H. Yan, H. X. Yang, T. Yang, Y. Yang, Y. X. Yang, H. Ye, M. Ye, M. H. Ye, B. X. Yu, C. X. Yu, J. S. Yu, S. P. Yu, C. Z. Yuan, W. L. Yuan, Y. Yuan, A. A. Zafar, A. Z. Zallo, Y. Zeng, B. X. Zhang, B. Y. Zhang, C. C. Zhang, D. H. Zhang, H. H. Zhang, H. Y. Zhang, J. Zhang, J. Q. Zhang, J. W. Zhang, J. Y. Zhang, J. Z. Zhang, L. Zhang, S. H. Zhang, T. R. Zhang, X. J. Zhang, X. Y. Zhang, Y. Zhang, Y. H. Zhang, Y. S. Zhang, Z. P. Zhang, Z. Y. Zhang, G. Zhao, H. S. Zhao, Jingwei Zhao, K. X. Zhao, Lei Zhao, Ling Zhao, M. G. Zhao, Q. Zhao, S. J. Zhao, T. C. Zhao, X. H. Zhao, Y. B. Zhao, Z. G. Zhao, A. Zhemchugov, B. Zheng, J. P. Zheng, Y. H. Zheng, Z. P. Zheng, B. Zhong, J. Zhong, L. Zhou, X. K. Zhou, X. R. Zhou, C. Zhu, K. Zhu, K. J. Zhu, S. H. Zhu, X. L. Zhu, X. W. Zhu, Y. M. Zhu, Y. S. Zhu, Z. A. Zhu, J. Zhuang, B. S. Zou, J. H. Zou, J. X. Zuo

arXiv preprint

DOI

2004

Boosted Decision Trees as an Alternative to Artificial Neural Networks for Particle Identification

Byron P. Roe, Hai-Jun Yang, Ji Zhu, Yong Liu, Ion Stancu, Gordon McGregor

arXiv preprint

DOI

2001

Secondary electrons and positrons in near earth orbit

L. Derome, M. Buenerd, Yong Liu

arXiv preprint

DOI

研究方向

材料辐照效应研究离子辐照材料改性核技术应用

此主页由公开资料整理，尚未经学者本人认领。