杜凤鸣｜大连海事大学｜学者主页

2026

Transient Oil-Film Formation and Asperity-Contact-Controlled Wear in Diesel Engine Bearing Liners During Start–Stop Operation

Zanbin Gao, Jianhui Shi, Jiren Gu, Zhen Guo, Zhaoyu Zhang, Ningyue Zhang, Fengming Du

Lubricants

DOI

2026

Wear Prediction of Grooved Journal-Bearing Shells Using Optimized BP Neural Networks

Dawei Li, Jianhui Shi, Jiren Gu, Zhaoyu Zhang, Yuguan Wu, Jie Wang, Zhen Guo, Fengming Du

Lubricants

DOI

2026

A review of digital twin methods and applications for bearings under marine operating constraints

Jianhui Shi, Zhen Guo, Jiren Gu, Z Zhang, Zetian Mi, Fengming Du

Ships and Offshore Structures

DOI

2026

Effect of Microarc Oxidation Power Frequency on the Tribological Performance of Amino-Modified Coatings with MoS2 Lubrication

Yuguan Wu, 马春生, Hao Liu, Guangrun Zang, Fengming Du

Journal of Materials Engineering and Performance

DOI

2025

Research on Sliding Bearing Wear Prediction Based on Gaussian Process Regression

Shanshan Liu, Fengming Du, Zanbin Gao, Xiaoguang Han, Yan Fang Shen, Jingsi Wang, Weiwei Wang

Journal of Materials Engineering and Performance

DOI

2025

Study on the Friction, Wear, and Anti-Seizure Properties of Fe-Ni-Co Electroplated Coating Used on Crankshaft Surface

Jiabao Li, Fengming Du, Yuhong Zhang, Zanbin Gao, Yong Liu, Jiujun Xu

Journal of Tribology

DOI

2025

Review and Prospect of Research Status on Sliding Bearing Coatings

Fengming Du, Zhen Guo, Renhao Mo, Wenqing Lin, Shuai Zhang

Lubricants

DOI

2025

Overview of Wear-Resistant Coatings in Marine Environments

Fengming Du, Renhao Mo, Zhen Guo, Jinlong Wang, Yuxing Yang, Shuai Zhang

Journal of Marine Science and Engineering

DOI

2025

Investigation on the Flow and Solidification Characteristic of Steel During Continuous Casting

Guohui Li, Tianyi Li, Shuai Zhang, Wenqing Lin, Fengming Du

Processes

DOI

2025

Investigation on the Flow and Heat Transfer Behavior of Molten Steel During Continuous Casting

Guohui Li, Fengming Du, Tianyi Li, Shuai Zhang

Computation

DOI

2025

Laser cladding of inconel 718 coating on stainless steel surface

Fengming Du, Yuhong Zhang, Zetian Mi, Yan Shen, Jingsi Wang, Jinlong Wang, Yuxing Yang, Yu Liu

Physica Scripta

DOI

2024

The Exposure Height of Silicon Particle with Round Edges Effect on the Tribological Property of Al-Si Alloy Cylinder Liner

Chengdi Li, Xiao Chen, Hao Liu, Lian-Jie Dong, Huihua Jian, Jingsi Wang, Fengming Du, Yong Guan

Coatings

DOI

2024

Influence of laser scanning speed on the microstructure and wear resistance properties of Inconel 718 coating

Fengming Du, Shanshan Liu, Zetian Mi, Guogang Zhang, Yan Shen, Yu Liu

Journal of Materials Science

DOI

2024

Investigation of the Flow Characteristics of Coated Slag during Continuous Casting

Guohui Li, Shanjiao Wang, Fengming Du

Coatings

DOI

2024

Effect of a Substrate’s Preheating Temperature on the Microstructure and Properties of Ni-Based Alloy Coatings

Yu Liu, Haiquan Jin, Tianhao Xu, Zhiqiang Xu, Fengming Du, Miao Yu, Yali Gao, Dongdong Zhang

Lubricants

DOI

2024

Research on the carbon emission reduction of internal combustion engines by reducing friction work

Fengming Du, Yuhong Zhang, Zanbin Gao, Jinlong Wang, Yuxing Yang, Jingsi Wang, Yan Shen

E3S Web of Conferences

DOI

2023

Tribological Performance and Scuffing Resistance of Cast-Iron Cylinder Liners and Al-Si Alloy Cylinder Liners

Chengdi Li, Xiao Chen, Hao Liu, Lian-Jie Dong, Huihua Jian, Jingsi Wang, Fengming Du

Coatings

DOI

2023

A multi-objective optimization of laser cladding process of Ni-based coating on the preheated copper alloy

Yu Liu, Tianhao Xu, Guohui Li, Zeyu Li, Fengming Du, Guangbin Chen

Materials Today Communications

DOI

2023

Simulation and Experimental Research on the Failure of Marine Sliding Bearings

Fengming Du, Dawei Li, Mingxing Hao, Yang Yu, Weiwei Wang

Journal of Marine Science and Engineering

DOI

2023

Mould heat transfer and friction behavior on the surface of wide and heavy slabs in the presence of longitudinal cracks

Yu Liu, Lai Jiang, Xudong Wang, Fengming Du, Jianhang Zhao

Metallurgical Research & Technology

DOI

2022

Wear Performance of Circular Shim against Cam in Engine Bench Test

Chengdi Li, Jing-Si Wang, Xu Han, Fengming Du, Geng-Shuo Liu, Ren-Jin Lin

Materials

DOI

2022

Overview of Friction and Wear Performance of Sliding Bearings

Fengming Du, Dawei Li, Xiaoxia Sa, Cong Li, Yang Yu, Chengdi Li, Jingsi Wang, Weiwei Wang

Coatings

DOI

2022

Research Progress Regarding the Use of Metal and Metal Oxide Nanoparticles as Lubricant Additives

Fengming Du, Cong Li, Dawei Li, Xiaoxia Sa, Yang Yu, Chengdi Li, Yuxing Yang, Jinlong Wang

Lubricants

DOI

2022

Thermo-mechanical behaviour analysis of slab corner during special steel continuous casting

Fengming Du, Long Wang, Shaolong Yan, Weiwei Wang

Ironmaking & Steelmaking Processes Products and Applications

DOI

2022

A three-dimensional stress model for the non-uniform mechanical behavior of a continuous casting mold

Fengming Du, Cong Li, Shanshan Liu, Chengdi Li, Xiaoguang Han, Ruoxuan Huang, Yan Fang Shen, Xudong Wang

The International Journal of Advanced Manufacturing Technology

DOI

2022

Microstructure and Wear Resistance of Ni-Wc-Tic Alloy Coating Fabricated by Laser

Yu Liu, Zeyu Li, Guohui Li, Fengming Du, Miao Yu

Lubricants

DOI

2021

连铸结晶器内铸坯非均匀摩擦行为

杜凤鸣，李大为，撒晓霞，黄若轩，沈岩，韩晓光

《连铸》

DOI

2021

Friction reduction mechanism of glycerol monooleate-containing lubricants at elevated temperature - transition from physisorption to chemisorption

Weiwei Wang, Bo Shen, Yang Li, Qiang Ni, Li Zhou, Fengming Du

Science Progress

DOI

2020

典型激光参数对高硅铝合金缸套表面微坑几何形貌影响

吕佳霏，韩晓光，赫冬，杜凤鸣，陈玉珍，徐久军

《激光与光电子学进展》

2020

Investigation on non-uniform friction behaviors of slab during continuous casting based on an inverse algorithm

Fengming Du, Kaiguang Zhang, Chengdi Li, Wenbin Chen, Pengchao Zhang, Xudong Wang

Journal of Materials Processing Technology

DOI

2020

A 3D model coupled inverse algorithm for the non-uniform thermal behavior of a continuous casting mold

Zetian Mi, Fengming Du, Jinlong Wang, Pengchao Zhang, Yu Liu

The International Journal of Advanced Manufacturing Technology

DOI

2020

The influence of protruding silicon particle shape on the friction performance of Al–Si alloy

Chengdi Li, Xiao Chen, Fengming Du, Yan Ni Shen, Jiujun Xu

Surface Topography Metrology and Properties

DOI

2019

Effects of Cast-Iron Surface Texturing on the Anti-Scuffing Performance under Starved Lubrication

Wenhua Li, Baihong Yu, Bin Ye, Yan Ni Shen, Ruoxuan Huang, Fengming Du

Materials

DOI

2019

Anti-Wear Property of Aluminum–Silicon Alloy Treated by Chemical Etching, Mechanical Honing and Laser Finishing

Fengming Du, Chengdi Li, Zetian Mi, Yan Ni Shen, Ruoxuan Huang, Xiaoguang Han, Yong Dong, Jiujun Xu

Materials

DOI

2019

Friction Performance of Aluminum-Silicon Alloy Cylinder Liner after Chemical Etching and Laser Finishing

Fengming Du, Chengdi Li, Zetian Mi, Ruoxuan Huang, Xiaoguang Han, Yan Ni Shen, Jiujun Xu

Metals

DOI

2019

On the Adhesive Strength Quantification and Tribological Performance of the Multilayered Fe–Ni Coating Fabricated by Electroplating

Ruoxuan Huang, Zeyu Ma, W. Z. Dong, Yan Ni Shen, Fengming Du, Jiujun Xu, M. Jin

Strength of Materials

DOI

2019

Wear Behavior of CuSn Coated Piston Ring Sliding against Nodular Cast Iron Cylinder Liner under Heavy-Duty Conditions

Wenhua Li, Baihong Yu, Yutao Lv, Yan Ni Shen, Ruoxuan Huang, Fengming Du

Metals

DOI

2018

Modeling of Gas Pressure and Dynamic Behavior of the Piston Ring Pack for the Two-Stroke Opposed-Piston Engine

Wenbin Chen, De-Liang Liu, Jiujun Xu, Ruoxuan Huang, Zezhong Chen, Fengming Du, Zhijun Yan

Journal of Tribology

DOI

2017

冷却强度、配对副以及润滑介质对活塞环槽温度限值的影响

韩晓光，杜凤鸣，吴迪，金梅，袁晓帅，胡定云，庞铭，徐久军

《车用发动机》

2017

微坑分布位置对复合润滑结构缸套摩擦磨损性能的影响规律

金梅，韩晓光，沈岩，李承娣，杜凤鸣，徐久军

《中国表面工程》

2017

Wear behavior of Al-Si alloy cylinder liner prepared by laser finishing

Chengdi Li, Mei Jin, Fengming Du, Weiwei Wang, Yan Ni Shen, Jiujun Xu

Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering

DOI

2017

Inverse problem-based analysis on non-uniform thermo-mechanical behaviors of slab during continuous casting

Fengming Du, Xudong Wang, Jingguo Fu, Xiaoguang Han, Jiujun Xu, Man Yao

The International Journal of Advanced Manufacturing Technology

DOI

2017

Prediction of Longitudinal Cracks Based on a Full-Scale Finite-Element Model Coupled Inverse Algorithm for a Continuously Cast Slab

Fengming Du, Xudong Wang, Yu Liu, Jingjing Wei, Man Yao

steel research international

DOI

2017

Investigation of non-uniform slag films and air gap during slab continuous casting

Fengming Du, X. Wang, C. Huang, Yue Liu, Gen Li, Jiujun Xu, Man Yao

Ironmaking & Steelmaking Processes Products and Applications

DOI

2017

Study on the non-uniform slab shrinkage of special steel during slab continuous casting

Fengming Du, X. Wang, Guo Yu, Z. Yan, Xiaohua Zhu, Jiujun Xu, Man Yao

Ironmaking & Steelmaking Processes Products and Applications

DOI

2016

二维结晶器铜板传热及力学行为研究

杜凤鸣，王旭东，刘宇，姚曼

《连铸》

2016

基于图像处理的黏结漏钢可视化检测方法

刘宇，王旭东，杜凤鸣，孔令伟，姚曼，张晓兵

《中南大学学报(自然科学版)》

2016

Analysis of non-uniform thermal behaviour of special steel during slab continuous casting

Fengming Du, X. Wang, X. Han, Jiujun Xu, Man Yao

Ironmaking & Steelmaking Processes Products and Applications

DOI

2014

基于实测温度的结晶器瞬态传热反问题计算方法

王旭东，臧欣阳，杜凤鸣，孔令伟，姚曼

《铸造技术》

精选作品

期刊论文

Transient Oil-Film Formation and Asperity-Contact-Controlled Wear in Diesel Engine Bearing Liners During Start–Stop Operation

Wear Prediction of Grooved Journal-Bearing Shells Using Optimized BP Neural Networks

A review of digital twin methods and applications for bearings under marine operating constraints

Effect of Microarc Oxidation Power Frequency on the Tribological Performance of Amino-Modified Coatings with MoS2 Lubrication

Research on Sliding Bearing Wear Prediction Based on Gaussian Process Regression

Study on the Friction, Wear, and Anti-Seizure Properties of Fe-Ni-Co Electroplated Coating Used on Crankshaft Surface

Review and Prospect of Research Status on Sliding Bearing Coatings

Overview of Wear-Resistant Coatings in Marine Environments

Investigation on the Flow and Solidification Characteristic of Steel During Continuous Casting

Investigation on the Flow and Heat Transfer Behavior of Molten Steel During Continuous Casting

Laser cladding of inconel 718 coating on stainless steel surface

The Exposure Height of Silicon Particle with Round Edges Effect on the Tribological Property of Al-Si Alloy Cylinder Liner

Influence of laser scanning speed on the microstructure and wear resistance properties of Inconel 718 coating

Investigation of the Flow Characteristics of Coated Slag during Continuous Casting

Effect of a Substrate’s Preheating Temperature on the Microstructure and Properties of Ni-Based Alloy Coatings

Research on the carbon emission reduction of internal combustion engines by reducing friction work

Tribological Performance and Scuffing Resistance of Cast-Iron Cylinder Liners and Al-Si Alloy Cylinder Liners

A multi-objective optimization of laser cladding process of Ni-based coating on the preheated copper alloy

Simulation and Experimental Research on the Failure of Marine Sliding Bearings

Mould heat transfer and friction behavior on the surface of wide and heavy slabs in the presence of longitudinal cracks

Wear Performance of Circular Shim against Cam in Engine Bench Test

Overview of Friction and Wear Performance of Sliding Bearings

Research Progress Regarding the Use of Metal and Metal Oxide Nanoparticles as Lubricant Additives

Thermo-mechanical behaviour analysis of slab corner during special steel continuous casting

A three-dimensional stress model for the non-uniform mechanical behavior of a continuous casting mold

Microstructure and Wear Resistance of Ni-Wc-Tic Alloy Coating Fabricated by Laser

连铸结晶器内铸坯非均匀摩擦行为

Friction reduction mechanism of glycerol monooleate-containing lubricants at elevated temperature - transition from physisorption to chemisorption

典型激光参数对高硅铝合金缸套表面微坑几何形貌影响

Investigation on non-uniform friction behaviors of slab during continuous casting based on an inverse algorithm

A 3D model coupled inverse algorithm for the non-uniform thermal behavior of a continuous casting mold

The influence of protruding silicon particle shape on the friction performance of Al–Si alloy

Effects of Cast-Iron Surface Texturing on the Anti-Scuffing Performance under Starved Lubrication

Anti-Wear Property of Aluminum–Silicon Alloy Treated by Chemical Etching, Mechanical Honing and Laser Finishing

Friction Performance of Aluminum-Silicon Alloy Cylinder Liner after Chemical Etching and Laser Finishing

On the Adhesive Strength Quantification and Tribological Performance of the Multilayered Fe–Ni Coating Fabricated by Electroplating

Wear Behavior of CuSn Coated Piston Ring Sliding against Nodular Cast Iron Cylinder Liner under Heavy-Duty Conditions

Modeling of Gas Pressure and Dynamic Behavior of the Piston Ring Pack for the Two-Stroke Opposed-Piston Engine

冷却强度、配对副以及润滑介质对活塞环槽温度限值的影响

微坑分布位置对复合润滑结构缸套摩擦磨损性能的影响规律

Wear behavior of Al-Si alloy cylinder liner prepared by laser finishing

Inverse problem-based analysis on non-uniform thermo-mechanical behaviors of slab during continuous casting

Prediction of Longitudinal Cracks Based on a Full-Scale Finite-Element Model Coupled Inverse Algorithm for a Continuously Cast Slab

Investigation of non-uniform slag films and air gap during slab continuous casting

Study on the non-uniform slab shrinkage of special steel during slab continuous casting

二维结晶器铜板传热及力学行为研究

基于图像处理的黏结漏钢可视化检测方法

Analysis of non-uniform thermal behaviour of special steel during slab continuous casting

基于实测温度的结晶器瞬态传热反问题计算方法

会议论文

连铸板坯黏结漏钢可视化检测方法

基于反算的结晶器热力行为研究

预印本

Reliability-Based Life Prediction of Bearing Shells Using Accelerated Degradation Modeling

研究方向