胡兴军

期刊论文

1. 宋学伟，陈恩博，肖阳，胡兴军，高振海，荣常如，李伟峰，宋雨欣，张浩楠（2026）. 基于机器学习的锂离子电池梯次利用的研究现状. 《吉林大学学报(工学版)》.DOI
2. 赵婧，马岩，马瑞兴，邓建交，李英，胡兴军，康泽浩，郭鹏，王子瑞（2026）. 数值风洞的SUV高精度瞬态数值仿真. 《重庆理工大学学报(自然科学)》.
3. Yang Xiao, Shuibin Liu, Xingjun Hu, Zhen-Hai Gao, Changru Rong, Wei-Feng Li, Yu-Xin Song, Hao-Nan Zhang (2026). Thermal safety mitigation strategies for lithium-ion batteries under high-rate charging/discharging conditions: A comprehensive review. Journal of Energy Storage.DOI
4. Yang Xiao, Shaobo Li, Xingjun Hu, Tianhe Jiang, Yuexin Sun, Xiaoxiang Fu, Xian-Zhen Zhang (2026). A systematic review of water management state and optimization methods of proton exchange membrane fuel cell. Journal of Power Sources.DOI
5. Xingjun Hu, Lihua Liu, Chen-Guang Lai, Jing-Yu Wang (2026). Aerodynamic characteristics effect mechanism of Formula race cars during corners.DOI
6. Xin Li, Haochun Liu, Lihua Liu, Jiaqi Yin, Fei Dong, Zehao Kang, Xingjun Hu (2026). Effect mechanisms of the external environment on raindrops movement and water film distribution in commercial vehicle side window regions. Journal of Wind Engineering and Industrial Aerodynamics.DOI
7. 高镇海，杨洋，胡兴军，王靖宇，郭鹏，王璐玮（2025）. 基于数字风洞的整车热管理性能开发. 《湖南大学学报(自然科学版)》.DOI
8. Yang Yang, Zhenhai Gao, Keyuan Shi, Xingjun Hu, Jing-Yu Wang, Hongyi Yao, Peng Guo (2025). Analysis of heat and cooling characteristics of hub motors in electric vehicles. Thermal Science and Engineering Progress.DOI
9. Xingjun Hu, Feifan Gao, Yang Xiao, Yang Yang (2025). Passive Thermal Control Strategies for Lithium-Ion Batteries under Thermal Abuse Conditions: An Experimental Study on Thermal Insulation Efficacy. Journal of Energy Engineering.DOI
10. Firoz Alam, Simon Watkins, Yingai Jin, Xingjun Hu (2025). Passenger Car Aerodynamic Drag, Thermal Cooling: A Perspective for Energy Saving and Improving Environment. Energies.DOI
11. Ying Zhao, Ji-Bo Hao, Jian-Feng Hu, Ke-Ming Zhou, Bin Chen, Xingjun Hu, Chen-Guang Lai (2025). Mechanical-thermal coupling design on battery pack embedded with concave quadrilateral cellular structure. Applied Thermal Engineering.DOI
12. 邵景峰，左辉辉，胡兴军（2024）. 某SUV气动减阻优化及其流场机制. 《汽车工程》.
13. 赵颖，周科名，杜卓栋，贾正阳，郝纪波，胡兴军（2024）. 新型蝙蝠型负泊松比微结构非充气轮胎设计. 《重庆理工大学学报(自然科学)》.
14. Xingjun Hu, Feifan Gao, Yang Xiao, De-Ping Wang, Zhen-Hai Gao, Zhi-Fan Huang, Sida Ren, Nan Jiang, Sitong Wu (2024). Advancements in the safety of Lithium-Ion Battery: The Trigger, consequence and mitigation method of thermal runaway. Chemical Engineering Journal.DOI
15. Zhenhai Gao, Yang Yang, Xingjun Hu, Jing-Yu Wang, Peng Guo, Lu-Wei Wang (2024). Numerical investigation of thermal soak within engine bay using lattice Boltzmann method. Scientific Reports.DOI
16. Xuehan Zhou, Xiaoyu Liu, Tingrui Xu, Xingjun Hu, Youfu Pan, Jiu Leng (2024). Numerical investigation and comparison of the aerodynamic characteristics of non-pneumatic tire and pneumatic tire. Journal of Wind Engineering and Industrial Aerodynamics.DOI
17. Xingjun Hu, Lihua Liu, Jingyu Wang, Peng Guo, Zehao Kang, Li Xin (2024). Aerodynamic characteristics and liquid film movement morphology of the DrivAer model in rainfall environments. Physics of Fluids.DOI
18. Yanghui Zhang, Qiaochu Qian, Xingjun Hu (2024). Study on the Control Mechanism of DBD-PA on Near Wall Flow. Journal of Physics Conference Series.DOI
19. 胡兴军，罗雨霏，张靖龙，郭鹏，王靖宇，余天明（2023）. 来流方向对百叶窗翅片-后扩型涡产生器热工水力性能的影响. 《华南理工大学学报(自然科学版)》.
20. 李胜，朱佳，黄德惠，陈存福，费洪庆，丰伟，胡兴军（2023）. 空冷中冷器百叶窗翅片结构参数优化. 《吉林大学学报(工学版)》.
21. 胡兴军，罗雨霏，金昕，郭鹏，耿亚林，兰巍，余天明（2023）. 商用车机舱热管理组合因素影响研究. 《湖南大学学报(自然科学版)》.
22. Xingjun Hu, Hongyang Liang, Yanghui Zhang, Jingyu Wang, Peng Guo (2023). Active control of cavity buffeting noise using a dielectric barrier discharge plasma actuator. Mechanical Systems and Signal Processing.DOI
23. Junning Zhang, Xingjun Hu, Zhen Wen, Peng Guo, Yuxiao Qing, Lifei Zhao, Daqi Lv, Shangyuan Li, Ziying Fan (2023). Aerodynamic Characteristics of Corrugated Features for Ahmed Model. Journal of Physics Conference Series.DOI
24. Xingjun Hu, Keyuan Shi, Jingming Mao, Peng Guo, Tianming Yu, Jingyu Wang (2023). Optimization study on the influence of rearview mirror and side window glass on interior noise. Journal of Vibration and Control.DOI
25. 梁宝钰，汪怡平，刘珣，张倩文，熊建波，胡兴军，王靖宇（2022）. 基于滑模理论的高速车辆侧风稳定性控制研究. 《汽车工程》.
26. 胡兴军，毛靖铭，张扬辉，刘一尘，马家义，乔俊贤，余天明（2022）. 标准模型的风噪声源及其特性分析. 《汽车工程》.
27. 胡兴军，王泽伟，于果，刘飞，兰巍，余天明，桑涛（2022）. 基于流固双向耦合的轿车气动与流致振动特性. 《湖南大学学报(自然科学版)》.
28. Xingjun Hu, Yufei Luo, Jiu Leng, Peng Guo, Tianming Yu, Jingyu Wang (2022). The low frequency pressure pulsation and control of the open-jet wind tunnel. Scientific Reports.DOI
29. Xingjun Hu, Jinglong Zhang, Yufei Luo, Jingyu Wang, Pengzhan Ma, Wei Lan, Chunbo Dong (2022). Drag Reduction Prediction of Ahmed Model with Traveling Wave Based on BP Neural Network. International Journal of Automotive Technology.DOI
30. Xingjun Hu, Zewei Wang, Jiuchao Li, Guo Yu, Jingyu Wang, Wei Lan, Jinglong Zhang, Pengzhan Ma (2022). Aerodynamic drag reduction based on static traveling wave structure. Journal of Mechanical Science and Technology.DOI
31. Zewei Wang, Xingjun Hu, Hui Zheng, Guo Yu, Wei Lan, Fei Liu (2022). Aerodynamic characteristics of MIRA automobile model based on fluid–structure coupling. AIP Advances.DOI
32. 胡兴军，李久超，曹庆炜，张扬辉，王靖宇（2021）. 基于LBM的旋转车轮整车气动特性研究. 《重庆理工大学学报(自然科学)》.
33. 胡兴军，张靖龙，辛俐，罗雨霏，王靖宇，余天明（2021）. 冷却管结构及风速对空冷中冷器性能的影响. 《吉林大学学报(工学版)》.DOI
34. 胡兴军，张靖龙，罗雨霏，辛俐，李胜，胡金蕊，兰巍（2021）. 冷却管结构及进气方向对空冷中冷器性能的影响. 《吉林大学学报(工学版)》.DOI
35. 李胜，张靖龙，黄德惠，陈存福，费洪庆，丰伟，胡兴军（2021）. 冷侧进气方向及速度对空冷中冷器性能影响研究. 《重庆理工大学学报(自然科学)》.
36. 胡兴军，刘一尘，李金成，兰巍，张扬辉，王靖宇（2021）. 基于自适应近似模型的GTS模型低风阻尾板优化. 《华南理工大学学报(自然科学版)》.
37. 和生泰，兰巍，胡兴军（2021）. 平板表面边界层流态结构的数值模拟. 《华南理工大学学报(自然科学版)》.
38. Zewei Wang, Xingjun Hu, Jingming Mao, Wei Lan, Hui Ping Zheng, Sheng Li (2021). Study on vehicle drag reduction simulation based on Suzen–Huang model. Physics of Plasmas.DOI
39. Xingjun Hu, Jinglong Zhang, Hui Ping Zheng, Yufei Luo, Peng Guo, Jingyu Wang (2021). Flow control of automobile with plasma vortex generator. Journal of Mechanical Science and Technology.DOI
40. Yang-hui Zhang, Xingjun Hu, Wei Lan, Yichen Liu, Mo Wang, Jingyu Wang (2021). Application of Omega vortex identification method in cavity buffeting noise. Journal of Hydrodynamics.DOI
41. Xingjun Hu, Peng Guo, Yanghui Zhang, Jingming Mao, Xingzhi Sun, Tao Sang, Wei Lan, Jingyu Wang (2021). Buffeting Noise Characteristics and Control of Automobile Side Window. SAE International journal of vehicle dynamics, stability, and NVH.DOI
42. Yanghui Zhang, Xingjun Hu, Hui Ping Zheng, Yichen Liu, Zhiqiang Zhang, Jingyu Wang (2021). Parameter interval optimization of the DBD plasma actuator based on orthogonal experiment and RBF neural network approximation model. Physics of Plasmas.DOI
43. 王靖宇，严伟，李颂，胡兴军，桑涛，王漠（2020）. 电动汽车电池冷板微小通道结构优化研究. 《汽车工程》.DOI
44. 王靖宇，耿亚林，惠政，胡兴军，李天鸿，刘子诚，李久超（2020）. 基于等离子体流动控制的方背式汽车模型减阻研究. 《汽车工程》.DOI
45. 张友朋，王恬，冯炜喆，王馨，胡兴军（2020）. 低温环境下锂离子电池组双重保护系统的实验研究. 《汽车实用技术》.DOI
46. 李颂，李金成，董春波，李天鸿，李腾飞，沈远航，严伟，王靖宇，胡兴军（2020）. 不同城市道路工况下重型商用车侧风气动特性研究（英文）. 《机床与液压》.
47. 郭鹏，胡兴军，高浩，王漠，桑涛，王靖宇，曹杰汛（2020）. 驻车通风参数对驾驶室热浸降温效果的影响. 《华南理工大学学报(自然科学版)》.
48. 辛俐，胡兴军，张靖龙，王靖宇，高炳钊（2020）. 汽车侧窗区域水污染的仿真和优化. 《华南理工大学学报(自然科学版)》.
49. 辛俐，高炳钊，胡兴军，桑涛，葛长江，刘江（2020）. 基于格子玻尔兹曼方法的侧窗水相分析与控制. 《哈尔滨工业大学学报》.
50. 胡兴军，张志强，李金成，刘一尘，桑涛，曹庆炜，李天鸿（2020）. 基于多目标区间优化算法的吸尘口结构优化. 《吉林大学学报(工学版)》.
51. 王靖宇，周申申，胡兴军，惠政（2020）. 基于等离子体的GTS模型气动减阻研究. 《湖南大学学报(自然科学版)》.DOI
52. 王靖宇，胡兴军，董春波，乔银波（2020）. 汽车空气动力学课程教学实践. 《教育现代化》.DOI
53. Li Xin, Xingjun Hu, Jingyu Wang (2020). Control of water contamination on side window of road vehicles by A-pillar section parameter optimization. Journal of Hydrodynamics.DOI
54. Sheng Li, Xingjun Hu, Cunfu Chen (2020). Commercial Vehicle Intake System Flow Field Mechanism Analysis. Proceedings of 2020 International Conference on Green Energy, Environment and Sustainable Development (GEESD 2020).DOI
55. Xingjun Hu, Peng Guo, Zewei Wang, Jingyu Wang, Mo Wang, Jia Zhu, Dejiu Wu (2020). Calculation of External Vehicle Aerodynamic Noise Based on LES Subgrid Model. Energies.DOI
56. Hui Ping Zheng, Xingjun Hu, Peng Guo, Zewei Wang, Jingyu Wang (2019). Separation Flow Control of a Generic Ground Vehicle Using an SDBD Plasma Actuator. Energies.DOI
57. Xu Zhao, Xiaoyi Li, Xingjun Hu, Li Xin, Kunyang Wang, Yuanhang Shen, Cheng Youn Lu (2019). Simulation of the water controlling ability of an adaptive inflow control device. IOP Conference Series Earth and Environmental Science.DOI
58. Jingyu Wang, Wei Yan, Tao Sang, Peng Guo, Bin Wu, Jing-long Zhang, Xingjun Hu, Chun-bo Dong (2019). Aeroelastic Response and Structural Improvement for Heavy-Duty Truck Cab Deflectors. SAE technical papers on CD-ROM/SAE technical paper series.DOI
59. 胡兴军，马鹏展，和生泰，周申申，王坤阳，齐胜业，杨博（2018）. 同平台下底盘设计变量对气动特性影响研究. 《2018中国汽车工程学会汽车空气动力学分会学术年会》.
60. 胡兴军，沈远航，刘江，路程，孙兴智，黄珊，李冠群（2018）. 汽车行李架横杆截面修形与降噪研究. 《2018中国汽车工程学会汽车空气动力学分会学术年会》.
61. 胡兴军，丁九洋，黄珊，高雪竹，刘龙威，孙兴智（2018）. 集装箱货车高速行驶侧风稳定性分析. 《汽车工程学报》.
62. 韩悦，辛政，曹庆炜，胡兴军（2018）. 仿生涡流发生器在赛车前翼上的数值研究. 《汽车实用技术》.
63. Yue Han, Zheng Xin, Qingwei Cao, Xingjun Hu (2018). Aerodynamic Optimization Design Based on Bionic Vortex Generator.DOI
64. Sheng Li, Cunfu Chen, Xingjun Hu, Jiexun Cao (2017). Numerical Simulation Research on Pressure during Door Closure of Commercial Vehicle. SAE International journal of commercial vehicles.DOI
65. Xingjun Hu, Bo Yang, Yulong Lei, Jingyu Wang, Xiucheng Li, Lei Liao, Ting Xu (2016). Automotive shape optimization using the radial basis function model based on a parametric surface grid. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
66. 孙磊，徐伟刚，卜绍先，胡兴军（2015）. 牵引列车风动阻力的分析和优化. 《2015中国汽车工程学会年会论文集（Volume4）》.
67. Xingjun Hu, Lei Liao, Yulong Lei, Hanbo Yang, Qingyin Fan, Bo Yang, Jing Hua Chang, Jingyu Wang (2015). A numerical simulation of wheel spray for simplified vehicle model based on discrete phase method. Advances in Mechanical Engineering.DOI
68. Xingjun Hu, Hanbo Yang, Bo Yang, Xiucheng Li, Yulong Lei (2015). Effect of Car Rear Shape on Pollution Dispersion in Near Wake Region. Mathematical Problems in Engineering.DOI
69. Longwei Liu, Chang Jing, Xingjun Hu (2015). Numerical Simulation of the Influence of Intake Grille Shape on the Aerodynamic Performance of a Passenger Car. Advances in engineering research/Advances in Engineering Research.DOI
70. 吴德久，胡兴军，杨博（2014）. 阶背式轿车模型尾流场仿真研究. 《汽车工程》.
71. Xingjun Hu, Qin Peng, Lei Liao, Peng Guo, Jingyu Wang, Bo Yang (2014). Numerical simulation of the aerodynamic characteristics of heavy-duty trucks through viaduct in crosswind. Journal of Hydrodynamics.DOI
72. Jingyu Wang, Changhai Yang, Xingjun Hu, Bo Guo (2013). Aerodynamic Optimization of a Simplified SUV Model. International Conference on Digital Manufacturing & Automation.DOI
73. Jian Ye, Yan Ze Xu, Xingjun Hu, Liao Lei, Wang Jingyu (2013). Aerodynamic Optimization Research on External Shape for a Sedan Based on Numerical Simulation. International Conference on Digital Manufacturing & Automation.DOI
74. 胡兴军（2011）. 电动汽车充电模式、特点及技术要求. 《电器工业》.
75. Xingjun Hu, Rui Zhang, Jian Ye, Xu Yan, Zhiming Zhao (2011). Influence of Different Diffuser Angle on Sedan's Aerodynamic Characteristics. Physics Procedia.DOI
76. Xingjun Hu, Bo Yang, Wang Jingyu, Guo Peng (2011). Research on Characteristics of External Flow in Region of Passenger Car's Wheels. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
77. 胡兴军，杨博，王靖宇，张英朝（2010）. 横向间距对超车气动特性影响的动态模拟. 《2010中国汽车工程学会年会》.
78. 王夫亮，胡兴军，杨博，傅立敏（2010）. 侧风对轿车气动特性影响的稳态和动态数值模拟对比研究. 《汽车工程》.
79. 张英朝，李杰，胡兴军，傅立敏（2009）. 摩托车及驾驶员气动特性的数值模拟研究. 《汽车工程》.
80. 胡兴军（2009）. 电动汽车:时代的召唤. 《汽车工业研究》.
81. 王靖宇，赖晨光，胡兴军（2008）. 汽车底部外形对气动特性的影响. 《中国公路学报》.
82. Xingjun Hu (2008). Influence of Automotive Underbody Shape on Aerodynamic Performance. Zhongguo gonglu xuebao.
83. 傅立敏，贺宝琴，吴允柱，胡兴军，赖晨光（2007）. 队列行驶车辆间距对气动特性的影响. 《汽车工程》.
84. Xingjun Hu, Li‐Min Fu, Baoqin He, Sheng Li, Yingchao Zhang, Yunzhu Wu (2007). Numerical Simulation of Three Dimensional Transient Aerodynamic Characteristics of Two Crossing Vehicles. International Journal for Computational Methods in Engineering Science and Mechanics.DOI
85. Xingjun Hu (2007). Numerical Simulation of Exterior Flow-field for Two Cars Moving Side by Side. Transactions of Shenyang Ligong University.
86. 傅立敏，胡兴军，张世村（2006）. CFD仿真在汽车轮辋辐板设计中的应用研究. 《汽车技术》.
87. 傅立敏，胡兴军，张世村（2006）. 不同几何参数车轮的汽车流场数值模拟研究. 《汽车工程》.
88. Xingjun Hu (2006). Research on grid generation of external flow-field around wheel. Hebei ke-ji daxue xuebao.
89. 胡兴军，子荫（2004）. 做大汽车零部件这块大蛋糕. 《汽车工艺师》.
90. 胡兴军（2004）. 炭纤维复合材料在汽车中的应用. 《炭素技术》.
91. Li‐Min Fu, Xingjun Hu (2003). Virtual Instrument System of Measuring Automotive Wake Velocity Based on Hot-Wire Anemometer. SAE technical papers on CD-ROM/SAE technical paper series.DOI

书籍章节

1. Xingjun Hu, Fengtao Ren, Peng Guo, Yang An (2012). Simulation Research on Effect of Coach Top-Window Opening on Internal and External Flow. Lecture notes in electrical engineering.DOI