冯连芳

期刊论文

1. 姚江华，常诚，顾雪萍，冯连芳，张才亮（2026）. 聚丙烯多区循环流化床工艺流程的多活性位建模. 《化学反应工程与工艺》.
2. 任鹏昊，李钿钿，蒋明哲，段金汤，顾雪萍，冯连芳，张才亮（2026）. 单活性位点异氰酸酯活化剂对己内酰胺阴离子聚合的影响. 《高校化学工程学报》.
3. 王炉钢，姚敏，蒋明哲，段金汤，顾雪萍，张才亮，冯连芳（2026）. 偏二氟乙烯聚合工艺及反应器研究进展. 《涂料工业》.
4. Lingli Li, Tiantian Li, Siyu Chen, Jin-Tang Duan, Cailiang Zhang, Xue-Ping Gu, Lianfang Feng (2026). Effect of Monomer Feeding Strategy on the Sequence and Properties of Fluorine-Containing Polyarylates via Interfacial Polycondensation. Polymers.DOI
5. Tiantian Li, Lianfang Feng, Xue-Ping Gu, Jin-Tang Duan, Mingzhe Jiang, Cailiang Zhang, Guo-Hua Hu (2026). Predicting Polymer Toughness: A Quantitative Framework Based on Interfacial Coverage Density. Macromolecules.DOI
6. Xingping Wang, Jin-Tang Duan, Fan Meng, Noriyoshi Arai, Cailiang Zhang, Xue-Ping Gu, Lianfang Feng (2026). Effect of Rigid Substituents on Surface Wettability and Structural Stability of Perfluorohexylethyl Methacrylate Copolymer Coatings. Polymer.DOI
7. Xinchong Wei, Jin-Tang Duan, Cailiang Zhang, Xue-Ping Gu, Lianfang Feng (2026). Mass transfer characteristics in a co-rotating twin-shaft kneader for polymer devolatilization. Chemical engineering research & design.DOI
8. 高甲，吴华志，常诚，顾雪萍，史路飞，冯连芳（2025）. 基于原位拉曼光谱的聚对苯二甲酸丁二醇酯和聚（对苯二甲酸-共-己二酸）丁二醇酯酯化反应动力学研究. 《石油化工》.
9. 成文凯，颜金钰，李鏊凡，王嘉骏，冯连芳（2025）. 立式高黏度搅拌设备研究进展. 《化学工程》.
10. 周尚龙，敖玉辉，段金汤，张才亮，顾雪萍，冯连芳，刘浏（2025）. 含氟聚芳醚酮超疏水复合涂层的制备及其性能研究. 《化工新型材料》.DOI
11. 姚家锐，吴雨轩，常诚，张才亮，顾雪萍，冯连芳（2025）. 4-羟基-2-苯甲酸和6-羟基-2-萘甲酸的乙酰化动力学. 《高校化学工程学报》.
12. 成文凯，颜金钰，王嘉骏，冯连芳（2025）. 高黏度缩聚反应器及其研究进展. 《高校化学工程学报》.
13. 吴雨轩，常诚，顾雪萍，冯连芳，张才亮（2025）. 面向立体异构的丁二烯乳液聚合过程模型化. 《化工学报》.
14. 金聘涵，魏新崇，姚敏，段金汤，顾雪萍，张才亮，冯连芳（2025）. 同向旋转卧式双轴捏合脱挥器的成膜和表面更新特性. 《化工学报》.
15. 吴华志，高甲，顾雪萍，常诚，徐洪强，冯连芳（2025）. 聚对苯二甲酸丁二醇酯相对分子质量对其流变性能的影响. 《合成纤维工业》.
16. 温佳娴，常诚，顾雪萍，冯连芳，张才亮（2025）. 丙烯酰胺-丙烯酸共聚过程转化率的原位拉曼光谱监测方法. 《过程工程学报》.
17. 汪星平，段金汤，张才亮，顾雪萍，冯连芳（2025）. 全氟聚醚基丙烯酸酯聚合物制备与应用研究进展. 《化工生产与技术》.
18. 张宸，常诚，顾雪萍，张才亮，冯连芳（2025）. 管材用乙烯-α-烯烃共聚物的结构及合成工艺研究进展. 《塑料工业》.
19. 汪星平，段金汤，张才亮，顾雪萍，冯连芳（2025）. 短链全氟烷基丙烯酸酯聚合物表面重构抑制策略研究进展. 《化工生产与技术》.
20. Cheng Chang, Zheng-Dong Deng, Lianfang Feng, Xue‐Ping Gu, Cailiang Zhang, Guo‐Hua Hu (2025). Real–time Raman monitoring and reactivity ratio determination for high–temperature synthesis of epoxy acrylate rubber. Chemical Engineering Science.DOI
21. Tiantian Li, Di Wang, Mingzhe Jiang, Jintang Duan, Lianfang Feng, Xue‐Ping Gu, Cailiang Zhang (2025). Broadening the co-continuous range of immiscible blends via a synergistic strategy combining in-situ formed ACBCA penta-block copolymer and OMMT. Polymer.DOI
22. Xinchong Wei, Min Yao, Jintang Duan, Cailiang Zhang, Xue‐Ping Gu, Lianfang Feng (2025). Computation of volumetric mass transfer coefficient ka in a twin-blade counter-rotating reactor for polymer devolatilization. Chemical Engineering Science.DOI
23. Penghao Ren, Tiantian Li, Lianfang Feng, Xue‐Ping Gu, Mingzhe Jiang, Jintang Duan, Cailiang Zhang (2025). Thermal degradation of polyamide 6: mechanisms, mitigation strategies, and challenges. Chemical Engineering Science.DOI
24. Xinchong Wei, Min Yao, Jintang Duan, Cailiang Zhang, Xue‐Ping Gu, Lianfang Feng (2025). Characteristics of film flow in twin-blade counter-rotating reactor for polymer devolatilization. Chemical Engineering Science.DOI
25. Naifan Dong, Jintang Duan, Cailiang Zhang, Xue‐Ping Gu, Lianfang Feng, Liu Liu (2025). Cyclo-linear synthesis of amino silicone oil and study on the catalytic polymerization mechanism of phosphazene base. Polymer.DOI
26. Peng Chen, Xiaosha Yu, Jikai Xu, Enhao Lu, Zhenggang Luo, Xiaoyuan Huang, Yangqin Tu, Kuanxin Wang, Xue‐Ping Gu, Lian‐Fang Feng, Yucheng Wu, Yunxuan Ding, Chenxi Guo (2025). Quantitative predictions of activity and selectivity for benzene hydrogenation by coverage self-consistent microkinetic modelling achieving theory–experiment equivalence. Journal of Catalysis.DOI
27. Lingli Li, Tiantian Li, Siyu Chen, Jin-Tang Duan, Cailiang Zhang, Xue-Ping Gu, Lianfang Feng (2025). Mechanistic and Kinetic Insights into the Interfacial Polymerization of Fluorine-Containing Polyarylate. Polymers.DOI
28. 张朝兆，江玲，顾雪萍，冯连芳，张才亮（2024）. 热塑性聚酰胺弹性体合成研究进展. 《化学反应工程与工艺》.
29. 吴洁，张才亮，顾雪萍，冯连芳（2024）. 芳香醇与异氰酸酯聚合物反应动力学研究. 《化学反应工程与工艺》.
30. 陈俊俊，段金汤，张才亮，顾雪萍，冯连芳（2024）. 甲基双酚类单体共聚-溴化-羧化法制备羧基化聚醚醚酮. 《化学反应工程与工艺》.
31. 成文凯，颜金钰，王嘉骏，冯连芳（2024）. 卧式捏合反应器及其在聚合工业中的研究进展. 《化工学报》.
32. 权志杰，常诚，段金汤，张才亮，顾雪萍，冯连芳（2024）. 电容器薄膜用聚丙烯原料微量元素分析方法. 《电力电容器与无功补偿》.
33. Sibo Lucas Cheng, Tiantian Li, Mingzhe Jiang, Jintang Duan, Lianfang Feng, Xueping Gu, Cailiang Zhang (2024). Construction of Core‐Shell Structure in PA6/ABS/SEBS Blends for Achieving Stiffness‐Toughness Balance. Advanced Engineering Materials.DOI
34. Mingzhe Jiang, Hao Tan, Lixin Jiang, Jintang Duan, Xue‐Ping Gu, Lianfang Feng, Cailiang Zhang (2024). Anionic Ring-Opening Polymerization of ε-Caprolactam above the Crystallization Temperature of Polyamide 6: A Study on the Effects of the Activator and Catalyst. Industrial & Engineering Chemistry Research.DOI
35. Zhangcheng Gao, Lianfang Feng, Xue‐Ping Gu, Jintang Duan, Mingzhe Jiang, Cailiang Zhang (2024). Synthesis and characterization of linear hybrid aliphatic/aromatic copolyurea via one‐step feeding method. Journal of Applied Polymer Science.DOI
36. Tiantian Li, Lian‐Fang Feng, Xue‐Ping Gu, Rainier Hreiz, Cailiang Zhang, Guo‐Hua Hu (2024). In-line near-infrared spectroscopy for measuring the composition, compositional fluctuation and mixedness of polymer blends in a twin screw extruder. Chemical Engineering Science.DOI
37. 陈俊俊，费昌恩，段金汤，顾雪萍，冯连芳，张才亮（2023）. 高生物活性聚醚醚酮化学改性研究进展. 《化工进展》.
38. Rui Liu, Yongqin Liu, Weidong Yang, Xin Li, Lianfang Feng (2023). Chromium-Based Complexes Bearing Aminophosphine and Phosphine–Imine–Pyrryl Ligands for Selective Ethylene Tri/Tetramerization. ACS Omega.DOI
39. Huang-He Feng, Guoxing Yang, Hanlin Wang, Xue‐Ping Gu, Lianfang Feng, Cailiang Zhang, Xi Chen, Deng-Fei Wang, Yuxin Gao (2023). Kinetic Parameter Estimation for Linear Low-Density Polyethylene Gas-Phase Process from Molecular Weight Distribution and Short-Chain Branching Distribution Measurements. Industrial & Engineering Chemistry Research.DOI
40. Zhongming Kang, Lian‐Fang Feng, Jiajun Wang (2023). Optimization of a Gas–Liquid Dual-Impeller Stirred Tank Based on Deep Learning with a Small Data Set from CFD Simulation. Industrial & Engineering Chemistry Research.DOI
41. Tiantian Li, Sibo Lucas Cheng, Lian‐Fang Feng, Xue‐Ping Gu, Jin-Tang Duan, Mingzhe Jiang, Cailiang Zhang (2023). A review on the free radical grafting of vinyl monomers onto polyethylene and polypropylene by reactive extrusion. Chemical Engineering Science.DOI
42. Wenxin Jiang, Jin-Tang Duan, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang, Guo‐Hua Hu (2023). Water as a medium for microwave-assisted grafting of maleic anhydride onto a polypropylene film to improve its adhesion with a polyamide 6 film. Chemical Engineering and Processing - Process Intensification.DOI
43. 龙俊，冯连芳，顾雪萍，张才亮（2022）. 聚二甲基硅氧烷改性乙烯-1-辛烯共聚物微孔发泡. 《高校化学工程学报》.
44. 成文凯，张先明，王嘉骏，冯连芳（2022）. 卧式单轴捏合反应器流动与混合特性的数值模拟. 《化工学报》.
45. 成文凯，张先明，王嘉骏，冯连芳（2022）. 反向旋转卧式双轴捏合反应器混合特性的数值模拟. 《化工学报》.
46. 冯黄河，顾雪萍，冯连芳，王登飞，杨国兴，高宇新，张才亮（2022）. 烯烃共聚物的分子质量分布和短链支化分布的同步去卷积方法. 《高校化学工程学报》.
47. 唐逸铮，段金汤，张才亮，冯连芳，顾雪萍（2022）. 高活性磷腈碱催化制备聚二甲基-甲基乙烯基硅氧烷. 《有机硅材料》.
48. Cheng Chang, Lianfang Feng, Xue‐Ping Gu, Cailiang Zhang, Liankui Dai, Xi Chen, Guo‐Hua Hu (2022). In Situ Raman Spectroscopy Real-Time Monitoring of a Polyester Polymerization Process for Subsequent Process Optimization and Control. Industrial & Engineering Chemistry Research.DOI
49. Rui Liu, Weidong Yang, Xin Li, Lianfang Feng (2022). Chromium-Based Complexes Bearing N-Substituted Diphosphinoamine Ligands for Ethylene Oligomerization. ACS Omega.DOI
50. Huang-He Feng, Xi Chen, Xue‐Ping Gu, Lianfang Feng, Deng-Fei Wang, Guoxing Yang, Yuxin Gao, Cailiang Zhang, Guo‐Hua Hu (2022). Modeling of the molecular weight distribution and short chain branching distribution of linear low-density polyethylene from a pilot scale gas phase polymerization process. Chemical Engineering Science.DOI
51. Jianqing Wang, Jianqing Wang, Jiajun Wang, Jiajun Wang, Lian‐Fang Feng (2022). Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors. Industrial & Engineering Chemistry Research.DOI
52. Wei‐Yun Ji, Tian‐Tian Li, Sibo Lucas Cheng, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang, Guo‐Hua Hu (2022). Two antagonistic effects of flow/mixing on reactive polymer blending. AIChE Journal.DOI
53. Zhangcheng Gao, Jianqing Wang, Lian‐Fang Feng, Xue‐Ping Gu, Jintang Duan, Cailiang Zhang (2022). Flow-accelerated polycondensation reaction to prepare rigid rodlike poly(p-phenylene-cis-benzobisoxazole). Chemical Engineering and Processing - Process Intensification.DOI
54. Chenglang Hu, Cong Li, Lian‐Fang Feng, Xue‐Ping Gu, Jintang Duan, Cailiang Zhang (2022). Modification of the Crystallization Behavior of Isotactic Polypropylene by Grafting Styrene Segments. Industrial & Engineering Chemistry Research.DOI
55. Zhangcheng Gao, Lian‐Fang Feng, Xueping Gu, Jintang Duan, Cailiang Zhang (2022). Effect of mixing on the sequence structure of molecular chain and properties of copolyurea. Journal of Applied Polymer Science.DOI
56. Tiantian Li, Sibo Lucas Cheng, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang, Guo‐Hua Hu (2022). Measuring the Interfacial Thickness of Immiscible Polymer Blends by Nano-probing of Atomic Force Microscopy. Chinese Journal of Polymer Science.DOI
57. Cheng Chang, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang, Xi Chen, Guo‐Hua Hu (2022). A segment probability method for calculating the molecular weight distributions of linear polycondensates in a continuous reactor. AIChE Journal.DOI
58. 冯黄河，蒋瑜芳，袁诗谣，顾雪萍，冯连芳，褚洪岭，刘通（2021）. BF3/乙醇催化1-癸烯连续齐聚过程牌号定制策略. 《化学反应工程与工艺》.
59. 顾雪萍，袁诗谣，冯黄河，冯连芳，褚洪岭，张才亮，刘通（2021）. 面向相对分子质量分布的1-癸烯连续齐聚过程动力学模型. 《化学反应工程与工艺》.
60. 姜纹昕，顾雪萍，冯连芳，王嘉骏，张才亮（2021）. 聚丙烯辐照接枝改性技术及其应用. 《塑料》.
61. 郑娜，朱斐超，房尔园，沈素丹，浦群，冯连芳，顾雪萍，徐丽（2021）. 基于扫描电镜技术表征医用口罩熔喷材料. 《电子显微学报》.
62. Jianqing Wang, Jianqing Wang, Guancheng Tan, Jiajun Wang, Jiajun Wang, Lianfang Feng (2021). Numerical study on flow, heat transfer and mixing of highly viscous non-newtonian fluid in Sulzer mixer reactor. International Journal of Heat and Mass Transfer.DOI
63. Wenkai Cheng, Sicheng Xin, Shichang Chen, Xianming Zhang, Wenxing Chen, Jiajun Wang, Lianfang Feng (2021). Hydrodynamics and mixing process in a horizontal self-cleaning opposite-rotating twin-shaft kneader. Chemical Engineering Science.DOI
64. Lin-Jiong Zhang, Lianfang Feng, Xue‐Ping Gu, Cailiang Zhang (2021). Additive‐free, robust and superelastic dual‐network graphene/melamine composite sponge for motion sensing. Journal of Applied Polymer Science.DOI
65. Shuxian Jiang, Jiajun Wang, Lianfang Feng, Marc‐Olivier Coppens (2021). Fractal injectors to intensify liquid-phase processes by controlling the turbulent flow field. Chemical Engineering Science.DOI
66. Jianqing Wang, Tianqi Liu, Chaozhong Xu, Jiajun Wang, Lianfang Feng (2021). Numerical investigation on hydrodynamics and heat transfer of highly viscous fluid in Sulzer mixer reactor. International Journal of Heat and Mass Transfer.DOI
67. Wenkai Cheng, Jiajun Wang, Xue‐Ping Gu, Lianfang Feng (2021). Film Formation and Mass Transfer Characteristics in a Horizontal Self-Cleaning Twin-Shaft Kneader with Highly Viscous Newtonian Fluids. Industrial & Engineering Chemistry Research.DOI
68. Wenxin Jiang, Lian‐Fang Feng, Xue‐Ping Gu, Jintang Duan, Cailiang Zhang (2021). Microwave-Induced Grafting of Maleic Anhydride onto the Surface of a Polypropylene Film for High Adhesion to Polyamide 6. Industrial & Engineering Chemistry Research.DOI
69. Xiaowen Lin, Xi Chen, Lorenz T. Biegler, Lian‐Fang Feng (2021). A modified collocation modeling framework for dynamic evolution of molecular weight distributions in general polymer kinetic systems. Chemical Engineering Science.DOI
70. Tiantian Li, Lian‐Fang Feng, Xueping Gu, Cailiang Zhang, Pan Wang, Guo‐Hua Hu (2021). Intensification of Polymerization Processes by Reactive Extrusion. Industrial & Engineering Chemistry Research.DOI
71. 吴坤红，顾雪萍，冯连芳，张才亮（2020）. 基于动态共价键制备可重复加工交联聚合物. 《高校化学工程学报》.
72. 常诚，冯连芳，顾雪萍，陈曦，张才亮（2020）. 基于分子量分布指标的聚酯生产过程模拟方法. 《化工学报》.
73. 朱欢银，张才亮，冯连芳，顾雪萍（2020）. 生物基1,3-丙二醇中微量杂质的气相色谱-质谱分析法. 《现代化工》.DOI
74. 刘钰，王胜鹏，陈八斤，王嘉骏，冯连芳（2020）. 自固化环氧树脂微泡的材料结构与性能. 《热固性树脂》.
75. 袁诗谣，郑娜，冯连芳，顾雪萍，张才亮（2020）. 凝胶渗透色谱法测定基础油PAO的相对分子质量及分布. 《石油炼制与化工》.
76. 周步杰，张才亮，冯连芳，顾雪萍（2020）. 溶聚丁苯橡胶生产技术专利综述. 《合成橡胶工业》.
77. 刘钰，王胜鹏，陈八斤，王嘉骏，冯连芳，顾雪萍（2020）. 缩水甘油酯型自固化环氧树脂的高效合成. 《高分子材料科学与工程》.DOI
78. Jianqing Wang, Jianqing Wang, Jinxing Song, Bencheng Yu, Shuxian Jiang, Jiajun Wang, Jiajun Wang, Lianfang Feng (2020). Numerical investigation of hydrodynamics and heat transfer for Bingham-pseudoplastic fluids in an industrial coiled stirred tank. International Journal of Chemical Reactor Engineering.DOI
79. Lin-Jiong Zhang, Lianfang Feng, Xue‐Ping Gu, Cailiang Zhang (2020). Electro-conductive and temperature-sensitive poly(N-isopropylacrylamide) composite hydrogels with improved mechanical properties. Applied Nanoscience.DOI
80. Shuxian Jiang, Jiajun Wang, Lianfang Feng, Marc‐Olivier Coppens (2020). Hydrodynamics and Local Turbulent Mixing of Submerged, Parallel Liquid Jets: Experiments and CFD Simulations. Industrial & Engineering Chemistry Research.DOI
81. Lin-Jiong Zhang, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang (2020). Superelastic and hydrophobic‐oleophilic modified melamine foam by ultralow amount of graphene for oil/water separation. Journal of Applied Polymer Science.DOI
82. 唐寅，顾雪萍，冯连芳，张才亮（2019）. 静电纺丝制备纳米纤维束及其应用. 《高校化学工程学报》.
83. 熊俊瑶，顾雪萍，冯连芳，王嘉骏，张才亮（2019）. 聚羟基乙酸聚合机理及合成方法研究进展. 《化学反应工程与工艺》.
84. 祁晗璐，王嘉骏，顾雪萍，冯连芳（2019）. 黏性颗粒团聚机理及流化特性研究进展. 《过程工程学报》.
85. 夏学禹，顾雪萍，冯连芳，王嘉骏，张才亮（2019）. 三聚氰胺甲醛泡沫增韧改性研究进展. 《高分子材料科学与工程》.
86. Xi‐Pei Cheng, Lianfang Feng, Xue‐Ping Gu, Xi Chen, Zhen‐Guo Liu, Kimberley B. McAuley (2019). Modeling of sequence length distribution for olefin copolymerization with vanadium‐based catalyst. AIChE Journal.DOI
87. Xiulei Jiang, Ling Zhao, Lianfang Feng, Chun-Ping Chen (2019). Microcellular thermoplastic polyurethanes and their flexible properties prepared by mold foaming process with supercritical CO2. Journal of Cellular Plastics.DOI
88. Hong Yu Guo, Jun Liu, Qin Lin Wang, Meiling Liu, Chunyu Du, Baoan Li, Lianfang Feng (2019). High thermal conductive poly(vinylidene fluoride)-based composites with well-dispersed carbon nanotubes/graphene three-dimensional network structure via reduced interfacial thermal resistance. Composites Science and Technology.DOI
89. Wenkai Cheng, Yang Ye, Shuxian Jiang, Jiajun Wang, Xue‐Ping Gu, Lianfang Feng (2019). Mixing intensification in a horizontal self-cleaning twin-shaft kneader with a highly viscous Newtonian fluid. Chemical Engineering Science.DOI
90. Yin Tang, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang (2019). Formation of bead‐free and core–shell superfine electrospinning fibers under the assistance of another polymer and an interfacial compatibilizer. Polymer Engineering and Science.DOI
91. Chaozhong Xu, Jiajun Wang, Xue‐Ping Gu, Lian‐Fang Feng (2019). Modeling of molecular weight and copolymer composition distributions for ethylene‐propylene solution copolymerization. AIChE Journal.DOI
92. Di Wang, Lian‐Fang Feng, Xue‐Ping Gu, Jiajun Wang, Cailiang Zhang, Aihua He (2019). Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio. Industrial & Engineering Chemistry Research.DOI
93. Tianqi Liu, Xue‐Ping Gu, Naixiang Li, Linbo Wu, Jiajun Wang, Lian‐Fang Feng (2019). Modeling of Coesterification Process for Biodegradable Poly(Butylene Succinate‐co‐Butylene Terephthalate) Copolyesters. Macromolecular Reaction Engineering.DOI
94. Tian-Qi Liu, XUE-PLNG Gu, Naixiang Li, Linbo Wu, Jia-Jun Wang, Lianfang Feng (2019). Macromol. React. Eng. 1/2019. Macromolecular Reaction Engineering.DOI
95. 汪情兵，张才亮，冯连芳，顾雪萍，王嘉骏（2018）. 甲基丙烯酸甲酯本体聚合动力学模型. 《高校化学工程学报》.
96. 朱俊，顾雪萍，冯连芳，张才亮，王嘉骏（2018）. 尼龙66盐溶液预聚合动力学模型建立. 《化学反应工程与工艺》.
97. 许超众，冯连芳（2018）. 聚合过程强化技术的发展. 《化工进展》.
98. 黄凯，郑征，胡激江，冯连芳，李伯耿（2018）. 丙烯/1-丁烯聚合物合金的单体组成切换法制备:动力学及聚合器模型. 《化工学报》.
99. 叶阳，成文凯，王嘉骏，顾雪萍，冯连芳（2018）. 聚合物反应挤出过程数值模拟进展. 《高分子通报》.
100. Xi Chen, Zhijiang Shao, Xue‐Ping Gu, Lianfang Feng, Lorenz T. Biegler (2018). Process Intensification of Polymerization Processes with Embedded Molecular Weight Distributions Models: An Advanced Optimization Approach. Industrial & Engineering Chemistry Research.DOI
101. Wenkai Cheng, Jiajun Wang, Xue‐Ping Gu, Lianfang Feng (2018). Film flow on rotating wheel in a horizontal twin-shaft reactor for polymer devolatilization. Chemical Engineering Science.DOI
102. Xi‐Pei Cheng, Huibo Zhang, Jijiang Hu, Lianfang Feng, Xue‐Ping Gu, Jean‐Pierre Corriou (2018). Characterization of broad molecular weight distribution polyethylene with multi-detection gel permeation chromatography. Polymer Testing.DOI
103. Tianqi Liu, Xue‐Ping Gu, Jiajun Wang, Lian‐Fang Feng (2018). Modeling and analysis of new reactor concepts for poly(ethylene terephthalate) esterification process. Chemical Engineering and Processing - Process Intensification.DOI
104. Fenglei Bi, Xiaoyi Qiu, Zhenhao Xi, Ling Zhao, Lian‐Fang Feng (2018). Decoupling Study of Melt Polycondensation of Polycarbonate: Experimental and Modeling of Reaction Kinetics and Mass Transfer in Thin Films Polycondensation Process. Macromolecular Reaction Engineering.DOI
105. Chaozhong Xu, Jiajun Wang, Xue‐Ping Gu, Lian‐Fang Feng (2018). Integration of CFD and polymerization for an industrial scale cis-polybutadiene reactor. Chemical Engineering Communications.DOI
106. 陈世昌，张先明，徐俊杰，陈文兴，冯连芳（2017）. 微型锥形双螺杆挤出机的循环混合特性. 《化工进展》.DOI
107. 张冬梅，朱俊，顾雪萍，冯连芳，张才亮（2017）. 尼龙66盐/尼龙6T盐的成盐过程分析. 《高校化学工程学报》.
108. 章林炯，张才亮，冯连芳（2017）. 机械性能优异的导电PNIPAAm复合水凝胶的制备. 《中国化学会2017全国高分子学术论文报告会摘要集——主题M：高分子共混与复合体系》.
109. 王笛，顾雪萍，冯连芳，王嘉骏，张才亮（2017）. 反应挤出热塑性动态硫化硅基橡胶研究进展. 《高分子材料科学与工程》.
110. 李聪，顾雪萍，冯连芳，张才亮（2017）. 苯基官能团改性聚丙烯制备微孔发泡材料. 《中国化学会2017全国高分子学术论文报告会摘要集——主题L：高分子加工》.
111. 张果，陈世昌，张先明，陈文兴，冯连芳（2017）. 单螺杆挤出机停留时间分布的在线检测. 《中国化学会2017全国高分子学术论文报告会摘要集——主题L：高分子加工》.
112. 唐寅，张才亮，冯连芳（2017）. 聚合物共混溶液电纺制备纳米纤维束及其油水分离特性. 《中国化学会2017全国高分子学术论文报告会摘要集——主题M：高分子共混与复合体系》.
113. 王迪，张才亮，冯连芳（2017）. 相容硫化剂改善PA12/PDMS热塑性动态硫化橡胶的界面交联. 《中国化学会2017全国高分子学术论文报告会摘要集——主题M：高分子共混与复合体系》.
114. Chi Zhang, Zhijiang Shao, Xi Chen, Chaozhong Xu, Jiajun Wang, Lianfang Feng (2017). Simulation and optimization of polymer molecular weight distribution with nonideal reactors. Computers & Chemical Engineering.DOI
115. Kun-Hong Wu, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang, Shirley Shen (2017). Thermally Reversible Cross-linkers To Facilitate the Improved Reprocessability of Poly(butyl methanol methacrylate) Rubber with Excellent Thermal and Mechanical Properties. Industrial & Engineering Chemistry Research.DOI
116. Cailiang Zhang, Cong Li, Long Wang, Lian‐Fang Feng, Tong Lin (2017). Dual effects of compatibilizer on the formation of oriented ribbon-like dispersed phase domains in polystyrene/polyamide 6 blends. Chemical Engineering Science.DOI
117. Cong Li, Lian‐Fang Feng, Xue‐Ping Gu, Kun Cao, Cailiang Zhang (2017). In situ visualization on formation mechanism of bi-modal foam via a two-step depressurization approach. The Journal of Supercritical Fluids.DOI
118. Xianming Zhang, Lian‐Fang Feng, Guo‐Hua Hu (2017). Measurement and Modeling of Local Residence Time Distributions in a Twin‐Screw Extruder.DOI
119. Cailiang Zhang, Lian‐Fang Feng, Guo‐Hua Hu (2017). Nano‐structuring of Polymer Blends by in situ Polymerization and in situ Compatibilization Processes.DOI
120. Cailiang Zhang, Wei‐Yun Ji, Lian‐Fang Feng, Guo‐Hua Hu (2017). Concept of (Reactive) Compatibilizer‐Tracer for Emulsification Curve Build‐up, Compatibilizer Selection, and Process Optimization of Immiscible Polymer Blends.DOI
121. Liangchao Li, Jiajun Wang, Lian‐Fang Feng, Xue‐Ping Gu (2017). Computational fluid dynamics simulation of hydrodynamics in an uncovered unbaffled tank agitated by pitched blade turbines. Korean Journal of Chemical Engineering.DOI
122. Chaozhong Xu, Jia-Jun Wang, Xue‐Ping Gu, Lian‐Fang Feng (2017). CFD modeling of styrene polymerization in a CSTR. Process Safety and Environmental Protection.DOI
123. Jiayuan Kang, Zhijiang Shao, Xi Chen, Xue‐Ping Gu, Lian‐Fang Feng (2017). Fast and reliable computational strategy for developing a rigorous model-driven soft sensor of dynamic molecular weight distribution. Journal of Process Control.DOI
124. Wenkai Cheng, Jiajun Wang, Xue‐Ping Gu, Lian‐Fang Feng (2017). Film formation in a horizontal twin-shaft rotating disk reactor for polymer devolatilization. Chemical Engineering Science.DOI
125. Cai-Liang Zhang, Li Cong, Long Wang, Lianfang Feng (2017). FOAMING BEHAVIOR OF THE MULTILAYERED PS / PA 6 BLEND AND ITS ANISOTROPIC MECHACICAL PROPERTIES.
126. 张永俊，王嘉骏，顾雪萍，冯连芳（2016）. 气固搅拌流化床中压力脉动特性. 《化工学报》.
127. 万利，冯连芳，顾雪萍（2016）. 芳香族尼龙合成中国专利技术分析. 《化工进展》.
128. 刘天奇，王嘉骏，冯连芳（2016）. 新结构气液相并流鼓泡塔式反应器流动特性与CFD模拟. 《高校化学工程学报》.
129. 张才亮，金祖玉，顾雪萍，冯连芳（2016）. 两种混合模式下PS-MAMA微量组分在聚合物熔体中的分散. 《化工学报》.
130. 顾雪萍，田璐璐，冯连芳，张才亮（2016）. 基于新UNIFAC基团的尼龙66盐溶解度的计算方法. 《化工学报》.
131. 汪涛涛，张才亮，冯连芳，顾雪萍（2016）. 聚丙烯微孔发泡材料的研究进展. 《合成树脂及塑料》.
132. 成文凯，王嘉骏，顾雪萍，冯连芳（2016）. 聚合物搅拌脱挥设备及其CFD模拟研究进展. 《化工进展》.
133. 金祖玉，冯连芳，张才亮（2016）. 聚合物挤出加工在线检测技术进展. 《高分子材料科学与工程》.
134. 笪文忠，王笛，张涛，冯连芳（2016）. 复合型相容剂对PP/PS共连续相组成和热稳定影响. 《现代塑料加工应用》.
135. 李聪，冯连芳，顾雪萍，王嘉骏，张才亮（2016）. 苯乙烯接枝改性聚丙烯制备微孔发泡材料. 《2016年全国高分子材料科学与工程研讨会论文摘要集》.
136. 王笛，冯连芳，顾雪萍，王嘉骏，张才亮（2016）. 三嵌段共聚物在不相容聚合物共混体系中的相容特性. 《2016年全国高分子材料科学与工程研讨会论文摘要集》.
137. 季微芸，冯连芳，顾雪萍，王嘉骏，张才亮（2016）. 反应示踪相容剂:探测反应共混挤出过程中的混合与反应. 《2016年全国高分子材料科学与工程研讨会论文摘要集》.
138. 陈蒙蒙，张先明，陈文兴，冯连芳（2016）. 浸渍涂覆过程中液膜流动的数值模拟. 《浙江理工大学学报(自然科学版)》.
139. 笪文忠，顾雪萍，王嘉骏，冯连芳（2016）. Hypol四釜串联聚丙烯工艺流程重构扩能. 《现代塑料加工应用》.
140. 刘朋博，王嘉骏，冯连芳，顾雪萍（2016）. 润湿性可切换的表面. 《材料工程》.
141. 徐丽，李若云，郑娜，浦群，胡激江，冯连芳（2016）. 聚乳酸-聚乙二醇单甲醚共混体系的调制DSC分析. 《功能高分子学报》.
142. Miaona Chen, Jiajun Wang, Siwei Zhao, Chaozhong Xu, Lianfang Feng (2016). Optimization of Dual-Impeller Configurations in a Gas–Liquid Stirred Tank Based on Computational Fluid Dynamics and Multiobjective Evolutionary Algorithm. Industrial & Engineering Chemistry Research.DOI
143. Yongjun Zhang, Jia-Jun Wang, Xue‐Ping Gu, Lian‐Fang Feng, Binxin Wu (2016). CFD simulation of an agitated gas-fluidized bed: Effects of particle–particle restitution coefficient on the hydrodynamics. Process Safety and Environmental Protection.DOI
144. Xianming Zhang, Mengmeng Chen, Jian‐Ping Ma, Wen‐Xing Chen, Lian‐Fang Feng (2016). Numerical simulation and experimental validation of liquid‐film‐flow characteristics in dip coating for non‐Newtonian fluids. Polymer Engineering and Science.DOI
145. Wei‐Yun Ji, Lian‐Fang Feng, Cailiang Zhang, Guo‐Hua Hu (2016). Concept of reactive compatibilizer-tracer for discovering interfacial reaction and morphology development for in-situ compatibilizing blending processes. AIP conference proceedings.DOI
146. Peng-Bo Liu, Jia-Jun Wang, Lianfang Feng, Xue-Ping Gu（2016）. 濡れ性切替え可能な表面【JST・京大機械翻訳】.
147. L. Wan, Lianfang Feng, Xue-Ping Gu（2016）. 芳香族ナイロン合成技術の中国特許の分析【JST・京大機械翻訳】.
148. Tian-Qi Liu, Jia-Jun Wang, Lianfang Feng（2016）. 新しい構造を有する气液相并の流動特性とCFDシミュレーションモデルを,本論文において提示した。【JST・京大機械翻訳】.
149. Yong-Jun Zhang, Jia-Jun Wang, Xue-Ping Gu, Lianfang Feng, Bin Wu（2016）. 撹はん流動層のCFDシミュレーション:流体力学に及ぼす粒子‐粒子反発係数の影響【Powered by NICT】.
150. Xue-Ping Gu, Lu-Lu Tian, Lianfang Feng, Cai-Liang Zhang (2016). Thermodynamic modeling with new UNIFAC groups for solubility of nylon66-salt in water system.
151. Mengdi Chen, Xian-Ming Zhang, Jiang-Ping Ma, Shichang Chen, Wenxing Chen, Lianfang Feng (2016). Experimental study on film thickness and the problem of free surface film flow in dip coating.DOI
152. Peng Liu, Jia-Jun Wang, Lianfang Feng, Xue-Ping Gu (2016). Surface with Switchable Wettability.
153. 万利，冯连芳，顾雪萍，张才亮（2015）. PA(66-co-6T)非等温结晶行为研究. 《化工新型材料》.
154. 许超众，王嘉骏，冯连芳，顾雪萍，Wu Binxin（2015）. 计算流体力学在化学反应器模拟中的应用进展. 《计算机与应用化学》.
155. 田璐璐，顾雪萍，冯连芳（2015）. PA66生产专利技术分析. 《合成纤维工业》.
156. 李娜，王嘉骏，陈苗娜，顾雪萍，冯连芳（2015）. 断螺带桨流动与混合的数值模拟. 《2015年中国化工学会年会》.
157. 李伯耿，罗英武，王文俊，冯连芳，朱世平（2015）. 面向高性能高分子材料制造的新兴学科方向:聚合物产品工程. 《2015年全国高分子学术论文报告会论文摘要集——主题M 高分子工业》.
158. 徐俊杰，张先明，陈文兴，冯连芳（2015）. 微型锥形双螺杆挤出机混合性能的数值模拟. 《高分子材料科学与工程》.
159. 范舒阳，李浩，张先明，陈文兴，冯连芳（2015）. 氨基功能化聚丙烯的制备与性能. 《高分子材料科学与工程》.
160. Cailiang Zhang, Li Wan, Xue‐Ping Gu, Lianfang Feng (2015). A Study on a Prepolymerization Process of Aromatic‐Contained Polyamide Copolymers PA(66‐co‐6T) via One‐Step Polycondensation. Macromolecular Reaction Engineering.DOI
161. Cailiang Zhang, Tao-Tao Wang, Xue‐Ping Gu, Lianfang Feng (2015). Crystallization behavior of functional polypropylene grafted graphene oxide nanocomposite. RSC Advances.DOI
162. Menghan Sun, Xianming Zhang, Wenxing Chen, Lian‐Fang Feng (2015). The effect of tunable modification parameters on the structure and properties of polypropylene with cyclotrimerization surface of isocyanates. Journal of Applied Polymer Science.DOI
163. Wei‐Yun Ji, Lian‐Fang Feng, Cailiang Zhang, Sandrine Hoppe, Guo‐Hua Hu, Dominique Dumas (2015). A concept of reactive compatibilizer‐tracer for studying reactive polymer blending processes. AIChE Journal.DOI
164. Long Wang, Lian‐Fang Feng, Xue‐Ping Gu, Cailiang Zhang (2015). Influences of the Viscosity Ratio and Processing Conditions on the Formation of Highly Oriented Ribbons in Polymer Blends by Tape Extrusion. Industrial & Engineering Chemistry Research.DOI
165. Wei‐Yun Ji, Lian‐Fang Feng, Cailiang Zhang, Sandrine Hoppe, Guo‐Hua Hu (2015). Development of a Reactive Compatibilizer-Tracer for Studying Reactive Polymer Blends in a Twin-Screw Extruder. Industrial & Engineering Chemistry Research.DOI
166. Chen Zhang, Zhijiang Shao, Xi Chen, Xue‐Ping Gu, Lian‐Fang Feng, Lorenz T. Biegler (2015). Optimal flowsheet configuration of a polymerization process with embedded molecular weight distributions. AIChE Journal.DOI
167. Menghan Sun, Xianming Zhang, Wenxing Chen, Lian‐Fang Feng (2015). Surface functionalization of polypropylene‐bearing isocyanate groups in solid state and their cyclotrimerization with diisocyanates. Journal of Applied Polymer Science.DOI
168. Shiyang Zhu, Hao Li, Xianming Zhang, Wenxing Chen, Lian‐Fang Feng (2015). Synthesis, copolymer composition, and rheological behavior of functionalized polystyrene with isocyanate and amine side groups. Designed Monomers & Polymers.DOI
169. Jiajun Wang, Jiajun Wang, Jianan Wang, Jianan Wang, Lian‐Fang Feng, Tong Lin (2015). Fluid mixing in droplet-based microfluidics with a serpentine microchannel. RSC Advances.DOI
170. Wei‐Yun Ji, Lian‐Fang Feng, Cailiang Zhang, Guo‐Hua Hu (2015). Reactive compatibilizer-tracer: A powerful tool for designing, scaling up and optimizing reactive blending processes. AIP conference proceedings.DOI
171. 李娜，王嘉骏，冯连芳，顾雪萍（2014）. 黏结性粗颗粒流动与流态化的研究进展. 《化工进展》.
172. 方实耿，傅智盛，顾雪萍，冯连芳，范志强（2014）. 烯烃配位活性聚合催化剂的研究进展. 《合成树脂及塑料》.
173. 王佳男，王嘉骏，冯连芳，顾雪萍（2014）. 弯曲微通道中液滴内混合过程的数值模拟研究. 《高校化学工程学报》.
174. 刘梦姣，张才亮，冯连芳（2014）. 静电纺丝法制备聚苯乙烯超疏水纤维的研究进展. 《化工新型材料》.
175. 蒋晓磊，顾雪萍，王嘉骏，冯连芳（2014）. 窄分子量分布聚甲基丙烯酸甲酯的研究进展. 《化工新型材料》.
176. 邱云霞，顾雪萍，冯连芳（2014）. 面向链结构的烯烃聚合过程模型化方法. 《化学反应工程与工艺》.
177. 邵之江，王可心，陈曦，冯连芳，顾雪萍（2014）. 面向分子结构质量指标的过程系统动态优化. 《化学反应工程与工艺》.
178. 葛春艳，王嘉骏，顾雪萍，冯连芳（2014）. PIV和CFD在搅拌桨设计和优化中的应用. 《化工与医药工程》.
179. 张永俊，王嘉骏，顾雪萍，冯连芳（2014）. 黏性颗粒流态化的气固流动模型研究进展. 《过程工程学报》.
180. 万利，冯连芳，顾雪萍，张才亮（2014）. PA(66-co-6T)固相缩聚. 《浙江大学学报(工学版)》.
181. 孙梦寒，朱士洋，张先明，陈文兴，冯连芳（2014）. 聚丙烯表面接枝异氰酸酯的制备及表征. 《2014年全国高分子材料科学与工程研讨会学术论文集（下册）》.
182. 朱士洋，张先明，陈文兴，冯连芳（2014）. 异氰酸根环三聚制备高性能高分子材料. 《2014年全国高分子材料科学与工程研讨会学术论文集（下册）》.
183. Zhou Tian, Lianfang Feng, Zhiqiang Fan, Guo‐Hua Hu (2014). Ethylene–Propylene Segmented Copolymer as an in Situ Compatibilizer for Impact Polypropylene Copolymer: An Assessment of Rheology and Morphology. Industrial & Engineering Chemistry Research.DOI
184. Jinzu Weng, Zhijiang Shao, Xi Chen, Xue‐Ping Gu, Zhen Yao, Lianfang Feng, Lorenz T. Biegler (2014). A novel strategy for dynamic optimization of grade transition processes based on molecular weight distribution. AIChE Journal.DOI
185. Chun-Yan Ge, Jia-Jun Wang, Xue‐Ping Gu, Lianfang Feng (2014). Reply to Comments on “CFD simulation and PIV measurement of the flow field generated by modified pitched blade turbine impellers” by Ge et al. [Chem. Eng. Res. Des. (2013), http://dx.doi.org/10.1016/j.cherd.2013.08.024]. Process Safety and Environmental Protection.DOI
186. Hao Li, Xianming Zhang, Shiyang Zhu, Wenxing Chen, Lian‐Fang Feng (2014). Preparation of polypropylene and polystyrene with NCO and NH2 functional groups and their applications in polypropylene/polystyrene blends. Polymer Engineering and Science.DOI
187. Shiyang Zhu, Xianming Zhang, Wen‐Xing Chen, Lian‐Fang Feng (2014). Synthesis, characterization, and properties of polystyrene/SiO 2 hybrid materials via sol–gel process. Polymer Composites.DOI
188. Zhou Tian, Xue‐Ping Gu, Lian‐Fang Feng, Guo‐Hua Hu (2014). Corrigendum to “A model for the structures of impact polypropylene copolymers produced by an atmosphere-switching polymerization process” [Chem. Eng. Sci. 101 (2013) 686–698]. Chemical Engineering Science.DOI
189. L. Wan, Lianfang Feng, Xue-Ping Gu, Cai-Liang Zhang（2014）. PA（66-co-6T）固相缩聚.
190. 顾雪萍，韩颖，王嘉骏，冯连芳（2013）. 气固搅拌流化床内压力脉动特性的数值模拟. 《化工学报》.
191. 顾雪萍，王艳丽，陈曦，王嘉骏，冯连芳（2013）. 基于聚合物分子量分布的乙烯淤浆聚合工艺优化. 《化工学报》.
192. 郑耸，顾雪萍，王嘉骏，冯连芳（2013）. 基于反应机理的乙烯淤浆共聚过程建模. 《化学工程》.
193. 柏基业，王校铮，田洲，冯连芳（2013）. 聚乙烯流化床反应器床内温度分布的模拟. 《石油化工》.
194. 奂金龙，占志良，陈曦，邵之江，姚臻，顾雪萍，冯连芳（2013）. 乙烯淤浆聚合动态分子量分布模拟计算. 《化工学报》.
195. Shungang Song, Yuhua Xue, Lianfang Feng, Hany S. Elbatal, Pingshan Wang, Charles N. Moorefield, George R. Newkome, Liming Dai (2013). Reversible Self‐Assembly of Terpyridine‐Functionalized Graphene Oxide for Energy Conversion. Angewandte Chemie.DOI
196. Reza Mehtarani, Zhisheng Fu, Songtao Tu, Zhiqiang Fan, Zhou Tian, Lianfang Feng (2013). Synthesis of Polypropylene/poly(ethylene-co-propylene) In-Reactor Alloys by Periodic Switching Polymerization Process: Dynamic Change of Gas-Phase Monomer Composition and Its Influences on Polymer Structure and Properties. Industrial & Engineering Chemistry Research.DOI
197. Jingjun Wu, Ying Lei Ren, Jianzhong Sun, Lianfang Feng (2013). Carbon Nanotube-Coated Macroporous Poly(N-isopropylacrylamide) Hydrogel and Its Electrosensitivity. ACS Applied Materials & Interfaces.DOI
198. Long Wang, Hongxia Wang, Lian‐Fang Feng, Tong Lin (2013). Tape Extrusion of Heterogeneous Polymer Blends: Polymer Films with Highly Oriented Nanoribbons, Structural-Optical Property, and Anisotropic Mechanical Strength. Macromolecular Materials and Engineering.DOI
199. Zhou Tian, Xueping Gu, Lian‐Fang Feng, Zhiqiang Fan, Guo‐Hua Hu (2013). An atmosphere‐switching polymerization process: A novel strategy to advanced polyolefin materials. AIChE Journal.DOI
200. Cailiang Zhang, Tao Zhang, Lian‐Fang Feng (2013). In situ control of co‐continuous phase morphology for PS/PS‐co‐TMI/PA6 blend. Journal of Applied Polymer Science.DOI
201. Chun-Yan Ge, Jia-Jun Wang, Xue‐Ping Gu, Lian‐Fang Feng (2013). CFD simulation and PIV measurement of the flow field generated by modified pitched blade turbine impellers. Process Safety and Environmental Protection.DOI
202. Reza Mehtarani, Zhisheng Fu, Zhiqiang Fan, Songtao Tu, Lian‐Fang Feng (2013). Synthesis of Polypropylene/Poly(ethylene-co-propylene) In-Reactor Alloys by Periodic Switching Polymerization Process—Effects of Gas Phase Polymerization Time on Polymer Properties. Industrial & Engineering Chemistry Research.DOI
203. Zhou Tian, Xueping Gu, Lian‐Fang Feng, Guo‐Hua Hu (2013). A model for the structures of impact polypropylene copolymers produced by an atmosphere-switching polymerization process. Chemical Engineering Science.DOI
204. Xianming Zhang, Shiyang Zhu, Cailiang Zhang, Lian‐Fang Feng, Wenxing Chen (2013). Mixing characteristics of different tracers in extrusion of polystyrene and polypropylene. Polymer Engineering and Science.DOI
205. Lian‐Fang Feng (2013). Optimization of ethylene slurry polymerization conditions based on molecular weight distribution.
206. Lian‐Fang Feng (2013). Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed.
207. Lian‐Fang Feng (2013). Application of Numerical Simulation Method in Polymer Rheology Teaching. Polymer Bulletin.
208. Lian‐Fang Feng (2013). Dynamic simulation of molecular weight distribution of ethylene slurry polymerization.
209. Lianfang Feng, Z. Tian, Zhi-Sheng Fu, Xue-Ping Gu, Zhi-Qiang Fan, Jia-Jun Wang (2013). Multi-phase polypropylene copolymer having high ethylene-propylene rubber content and preparation method thereof.
210. Lianfang Feng, Z. Tian, Qing-Yu Hu, Xue-Ping Gu, Zhi-Qiang Fan, Li Mei, Wen-Zhong Da (2013). Preparation method for multiphase polyolefin.
211. Zhi-Sheng Fu, Zhi-Qiang Fan, Yao Huang, Xue-Ping Gu, Lianfang Feng (2013). A bridging metallocene complex and its Applications.
212. 姚敏，王嘉骏，顾雪萍，冯连芳（2012）. POSS基树枝状大分子的合成与应用. 《化学进展》.
213. 占志良，邵之江，陈曦，赵豫红，顾雪萍，姚臻，冯连芳（2012）. 乙烯淤浆聚合过程的全联立模拟方法. 《高校化学工程学报》.
214. 宋顺刚，顾雪萍，王嘉骏，冯连芳（2012）. 微反应器在聚合反应中的应用. 《化工进展》.DOI
215. 李红星，王嘉骏，冯连芳，金志江（2012）. 搅拌槽内中高黏物系的气液分散特性研究进展. 《化工进展》.
216. Ying Han, Jia-Jun Wang, Xue‐Ping Gu, Lian‐Fang Feng (2012). Numerical simulation on micromixing of viscous fluids in a stirred-tank reactor. Chemical Engineering Science.DOI
217. Lian‐Fang Feng (2012). Progress on CFD simulation of gas-liquid two-phase flow in stirred tank reactor. Process Equipment & Piping.
218. Lian‐Fang Feng (2012). Simultaneous Simulation of Ethylene Slurry Polymerization Process. Journal of Chemical Engineering of Chinese Universities.
219. Lian‐Fang Feng (2012). Application of microreactors in polymerization. Huagong jinzhan.
220. Chen Zhang, Zhiliang Zhan, Zhijiang Shao, Yuhong Zhao, Xi Chen, Xue‐Ping Gu, Zhen Yao, Lianfang Feng, Lorenz T. Biegler (2012). Equation-Oriented Optimization on an Industrial High-Density Polyethylene Slurry Process with Target Molecular Weight Distribution. Industrial & Engineering Chemistry Research.DOI
221. Ying Han, Jia-Jun Wang, Xue‐Ping Gu, Lianfang Feng, Guo‐Hua Hu (2012). Homogeneous Fluidization of Geldart D Particles in a Gas–Solid Fluidized Bed with a Frame Impeller. Industrial & Engineering Chemistry Research.DOI
222. Xianming Zhang, Hao Li, Wen‐Xing Chen, Lianfang Feng (2012). Rheological properties and morphological evolutions of polypropylene/ethylene‐butene copolymer blends. Polymer Engineering and Science.DOI
223. Zhou Tian, Xue‐Ping Gu, Lianfang Feng, Jean‐Pierre Corriou, Guo‐Hua Hu (2012). Modeling and simulation of polypropylene particle size distribution in industrial horizontal stirred bed reactors. Journal of Applied Polymer Science.DOI
224. Zhou Tian, Xue‐Ping Gu, Gang-Liang Wu, Lianfang Feng, Zhiqiang Fan, Guo‐Hua Hu (2012). Effects of Switching Frequency of a Periodic Switching Polymerization Process on the Microstructures of Ethylene–Propylene Copolymers in Polypropylene/Poly(ethylene-co-propylene) in-Reactor Alloys. Industrial & Engineering Chemistry Research.DOI
225. Jia-Jun Wang, Zi‐Zi Li, Xue‐Ping Gu, Lian‐Fang Feng, Cailiang Zhang, Guo‐Hua Hu (2012). A dissipative particle dynamics study on the compatibilizing process of immiscible polymer blends with graft copolymers. Polymer.DOI
226. Jia‐Jun Wang, Yi‐Wei Yang, Xue‐Ping Gu, Lian‐Fang Feng (2012). Effects of periodic and non‐periodic chaotic mixing on morphology development of immiscible polymer blends. Journal of Applied Polymer Science.DOI
227. Jia‐Jun Wang, Ying Han, Xue‐Ping Gu, Lian‐Fang Feng, Guo‐Hua Hu (2012). Effect of agitation on the fluidization behavior of a gas–solid fluidized bed with a frame impeller. AIChE Journal.DOI
228. Jun Zhang, Xi‐Jun Shen, Jian Zhang, Lian‐Fang Feng, Jia‐Jun Wang (2012). Experimental and modeling study of the solid state polymerization of poly(ethylene terephthalate) over a wide range of temperatures and particle sizes. Journal of Applied Polymer Science.DOI
229. 张军，沈希军，张建，冯连芳（2011）. 粉状聚酯固相缩聚反应动力学与降解行为的研究. 《高校化学工程学报》.
230. 周伟，王嘉骏，顾雪萍，冯连芳（2011）. H-POSS表面润湿性的分子动力学模拟. 《计算机与应用化学》.
231. 张军，沈希军，张建，梁玮，冯连芳（2011）. 聚对苯二甲酸乙二醇酯切片溶胀聚合过程的模拟. 《石油化工》.
232. 吴钢良，田洲，王嘉骏，顾雪萍，冯连芳（2011）. 多区循环反应器中丙烯气相聚合的模拟分析. 《化学工程》.
233. 李文艳，顾雪萍，王嘉骏，冯连芳（2011）. 规模化聚对苯二甲酸乙二醇酯终缩聚的流程模拟. 《石油化工》.
234. 王艳丽，顾雪萍，王嘉骏，冯连芳（2011）. PC-SAFT在烯烃共聚物体系物性计算中的应用进展. 《化工进展》.
235. Qi‐Yong Yu, Cailiang Zhang, Xue‐Ping Gu, Jiajun Wang, Lian‐Fang Feng (2011). Compatibilizing efficiency of copolymer precursors for immiscible polymer blends. Journal of Applied Polymer Science.DOI
236. Cailiang Zhang, Lian‐Fang Feng, Xue‐Ping Gu, Sandrine Hoppe, Guo‐Hua Hu (2011). Tracer‐compatibilizer: Synthesis and applications in polymer blending processes. Polymer Engineering and Science.DOI
237. Cailiang Zhang, Lian‐Fang Feng, Sandrine Hoppe, Guo‐Hua Hu (2011). Compatibilizer‐tracer: A powerful concept for polymer‐blending processes. AIChE Journal.DOI
238. Lian‐Fang Feng (2011). Application of PC-SAFT state equation on the calculation of olefin copolymer's properties. Huagong jinzhan.
239. Hongxia Wang, Yuhua Xue, Jie Ding, Lianfang Feng, Xungai Wang, Tong Lin (2011). Durable, Self‐Healing Superhydrophobic and Superoleophobic Surfaces from Fluorinated‐Decyl Polyhedral Oligomeric Silsesquioxane and Hydrolyzed Fluorinated Alkyl Silane. Angewandte Chemie.DOI
240. C.-L. Zhang, Lianfang Feng, Xue‐Ping Gu, Sandrine Hoppe, Guo‐Hua Hu (2011). Kinetics of the anionic polymerization of ε‐caprolactam from an isocyanate bearing polystyrene. Polymer Engineering and Science.DOI
241. Zhou Tian, Xue‐Ping Gu, Gang-Liang Wu, Lianfang Feng, Zhiqiang Fan, Guo‐Hua Hu (2011). Periodic Switching of Monomer Additions for Controlling the Compositions and Microstructures of Segmented and Random Ethylene-Propylene Copolymers in Polypropylene in-Reactor Alloys. Industrial & Engineering Chemistry Research.DOI
242. Christian Penu, Guo‐Hua Hu, Christian Fonteix, Philippe Marchal, L. Choplin, Lianfang Feng (2011). Effects of carbon nanotubes and their state of dispersion on the anionic polymerization of ε‐caprolactam: II. Rheology. Polymer Engineering and Science.DOI
243. Gang-Liang Wu, Z. Tian, Jia-Jun Wang, Xue-Ping Gu, Lianfang Feng (2011). Simulation of multizone circulating reactor for propylene gas-phase polymerization.
244. Lianfang Feng (2011). Solid State Polymerization and Degradation of PET Powder.
245. 王昆，王嘉骏，冯连芳，顾雪萍（2010）. 内置阻块型微混合器内流体混合强化的数值模拟. 《化学工程》.
246. 李文艳，顾雪萍，曾思，王嘉骏，冯连芳（2010）. 规模化聚酯装置酯化过程的机理模型化. 《化学工程》.
247. 段金汤，王嘉骏，王龙，冯连芳，顾雪萍（2010）. CO2和环氧丙烷共聚过程流变特性. 《化学工程》.
248. 李广赞，顾雪萍，冯连芳，王嘉骏，胡国华（2010）. 高黏微观混合表征新方法及其在双螺杆挤出机中的应用. 《高校化学工程学报》.
249. 张文红，王嘉骏，薛裕华，冯连芳，戴黎明（2010）. 不完全缩合七苯基三羟基POSS的合成及表征. 《高校化学工程学报》.
250. 王昆，王嘉骏，顾雪萍，冯连芳（2010）. 微通道内Taylor流的计算流体力学数值模拟研究进展. 《化工进展》.
251. 冯连芳（2010）. 石油化工设备设计选用手册. 反应器. 《化学工业出版社》.
252. Cailiang Zhang, Lian‐Fang Feng, Sandrine Hoppe, Guo‐Hua Hu (2010). Instability of graft copolymers under polymer blending conditions. Chemical Engineering Science.DOI
253. Lian‐Fang Feng (2010). Development and Proposal of Mixing Equipment Design. Process Equipment & Piping.
254. Lian‐Fang Feng (2010). Modeling of esterification process in industrial poly(ethylene terephthalate) plant based on kinetic mechanism. Chemical Engineering(China).
255. Lian‐Fang Feng (2010). Progress in modeling of Taylor flow within microchannels by computational fluid dynamics. Huagong jinzhan.
256. Yuhua Xue, Hongxia Wang, Yan Jie Zhao, Liming Dai, Lianfang Feng, Xungai Wang, Tong Lin (2010). Magnetic Liquid Marbles: A “Precise” Miniature Reactor. Advanced Materials.DOI
257. Cailiang Zhang, Lianfang Feng, Xue‐Ping Gu, Sandrine Hoppe, Guo‐Hua Hu (2010). Blend composition dependence of the compatibilizing efficiency of graft copolymers for immiscible polymer blends. Polymer Engineering and Science.DOI
258. Jia-Jun Wang, Jin-Tang Duan, Long Wang, Xue‐Ping Gu, Lianfang Feng (2010). Measurement and Modeling of the High-Pressure Phase Behavior of the Carbon Dioxide + Propene Oxide Binary System. Journal of Chemical & Engineering Data.DOI
259. 余莉娜，王嘉骏，薛裕华，顾雪萍，冯连芳（2010）. P(NIPAM-co-MAPOSS)共聚物的合成与性能. 《合成技术及应用》.
260. Jin-Tang Duan, Jia-Jun Wang, Lianfang Feng, Long Wang, Xue-Ping Gu (2010). Pressure Dependence of the CO2/Propylene Oxide Copolymerization Catalyzed by Zinc Glutarate.DOI
261. 常静，顾雪萍，冯连芳，胡国华（2010）. MALDI-TOF MS对难溶聚芳酰胺PA6T的分析表征. 《光谱学与光谱分析》.
262. Jing Chang, Xue-Ping Gu, Lianfang Feng, Guo-Hua Hu (2010). [Characterization of insoluble polyamide-6,T by MALDI-TOF MS]. Guang pu xue yu guang pu fen xi = Guang pu.
263. 蔡富，冯连芳，王嘉骏，顾雪萍（2010）. PP/PP-g-PA6/PA6的相容性和低温冲击性能. 《现代塑料加工应用》.
264. Guo-Hua Hu, Cai-Liang Zhang, Lianfang Feng, S. Hoppe (2010). Residence Time Distribution: A Powerful Concept for Building up Emulsification Curves for Polymer Blends.
265. 李良超，王嘉骏，顾雪萍，冯连芳（2009）. 双层组合桨搅拌槽内气液微观分散特性. 《化学工程》.
266. 常静，冯连芳，顾雪萍，胡国华（2009）. 离子液体中聚对苯二甲酰己二胺的合成与表征. 《高分子学报》.
267. 常静，冯连芳，王嘉骏（2009）. 离子液体在聚酰胺类聚合物合成中的应用. 《2009年全国高分子学术论文报告会论文摘要集（上册）》.
268. 曾思，顾雪萍，王嘉骏，冯连芳，徐锦龙（2009）. 聚对苯二甲酸乙二醇酯酯化过程组分物性及相平衡计算. 《石油化工》.
269. Lian‐Fang Feng (2009). Local gas-liquid dispersion properties in a dual-impeller stirred vessel. Chemical Engineering(China).
270. Minoo Naebe, Tong Lin, Lianfang Feng, Liming Dai, Alexis R. Abramson, Vikas Prakash, Xungia Wang (2009). Conducting Polymer and Polymer/CNT Composite Nanofibers by Electrospinning. ACS symposium series.DOI
271. Xianming Zhang, Lianfang Feng, Wen‐Xing Chen, Guo‐Hua Hu (2009). Numerical simulation and experimental validation of mixing performance of kneading discs in a twin screw extruder. Polymer Engineering and Science.DOI
272. Yuhua Xue, Hongxia Wang, Dingshan Yu, Lianfang Feng, Liming Dai, Xungai Wang, Tong Wei Lin (2009). Superhydrophobic electrospun POSS-PMMA copolymer fibres with highly ordered nanofibrillar and surface structures. Chemical Communications.DOI
273. Jing Chang, Lianfang Feng, Xue-Ping Gu, Guo-Hua Hu (2009). SYNTHESIS OF POLY(HEXAMETHYLENE TEREPHTHALAMIDE) IN IONIC LIQUIDS AND CHARACTERIZATION: SYNTHESIS OF POLY(HEXAMETHYLENE TEREPHTHALAMIDE) IN IONIC LIQUIDS AND CHARACTERIZATION.DOI
274. 李广赞，崔莎莎，冯连芳，胡国华（2008）. PS-co-TMI与己内酰胺反应研究. 《高校化学工程学报》.
275. 张先明，李广赞，冯连芳，胡国华（2008）. 双螺杆挤出机中局部停留时间分布研究. 《高校化学工程学报》.
276. 梁玮，冯连芳，顾雪萍，张军，胡国华（2008）. 十四烷辅助下聚酯的固相缩聚. 《化学反应工程与工艺》.
277. 林松，李良超，王嘉骏，顾雪萍，冯连芳（2008）. 鼓泡塔中气泡尺寸分布和局部气含率研究. 《化学工程》.
278. Cailiang Zhang, Lian‐Fang Feng, Jian Zhao, Hua Huang, Sandrine Hoppe, Guo‐Hua Hu (2008). Efficiency of graft copolymers at stabilizing co-continuous polymer blends during quiescent annealing. Polymer.DOI
279. Lian‐Fang Feng (2008). Study on bubble size distribution and local gas holdup in bubble column. Chemical Engineering(China).
280. Lian‐Fang Feng (2008). CFD simulation of gas holdup and gas-liquid flow in bubble columns. Sciencepaper Online.
281. Cailiang Zhang, Lianfang Feng, Sandrine Hoppe, Guo‐Hua Hu (2008). Residence time distribution: An old concept in chemical engineering and a new application in polymer processing. AIChE Journal.DOI
282. Jiajun Wang, Lianfang Feng, Julio M. Ottino, Richard M. Lueptow (2008). Inertial Effects on Chaotic Advection and Mixing in a 2D Cavity Flow. Industrial & Engineering Chemistry Research.DOI
283. Cailiang Zhang, Lianfang Feng, Sandrine Hoppe, Guo‐Hua Hu (2008). Grafting of polyamide 6 by the anionic polymerization of ε‐caprolactam from an isocyanate bearing polystyrene backbone. Journal of Polymer Science Part A Polymer Chemistry.DOI
284. Cai-Liang Zhang, Xue-Ping Gu, Lianfang Feng, Guo-Hua Hu（2008）. 活性阴离子聚合合成结构可控的PS-g-PA6.
285. Lianfang Feng (2008). Research on the flow field and heat transfer in PVC suspension polymerization reactor.
286. 顾雪萍，王嘉骏，沈航，冯连芳（2007）. 乙烯淤浆聚合体系组分的物性计算方法. 《高校化学工程学报》.
287. 崔莎莎，李广赞，冯连芳，许忠斌，胡国华（2007）. 粘性体系中微观混合实验研究. 《化学工程》.
288. 沈希军，张军，冯连芳，蒋士成，汪燮卿（2007）. 聚酯熔体热水中造粒传热过程的模拟. 《石油化工》.
289. 顾雪萍，冯连芳，全继胜，刁春霞（2007）. 低聚合度聚醋酸乙烯合成与反应液流变特性. 《石油化工技术与经济》.
290. Xianming Zhang, Lian‐Fang Feng, Sandrine Hoppe, Guo‐Hua Hu (2007). Local residence time, residence revolution, and residence volume distributions in twin‐screw extruders. Polymer Engineering and Science.DOI
291. Cailiang Zhang, Lian‐Fang Feng, Xue‐Ping Gu, Sandrine Hoppe, Guo‐Hua Hu (2007). Efficiency of graft copolymers as compatibilizers for immiscible polymer blends. Polymer.DOI
292. Cailiang Zhang, Lian‐Fang Feng, Xue‐Ping Gu, Sandrine Hoppe, Guo‐Hua Hu (2007). Determination of the molar mass of polyamide block/graft copolymers by size-exclusion chromatography at room temperature. Polymer Testing.DOI
293. Guo‐Hua Hu, Sandrine Hoppe, Lianfang Feng, Christian Fonteix (2007). Nano-scale phenomena and applications in polymer processing. Chemical Engineering Science.DOI
294. Jianfeng Wang, Li Wang, Haoqi Gao, Wenqin Wang, Guohua Jiang, Xiaocheng Dong, Wei Wang, Lianfang Feng (2007). Kinetic study on copolymerization of ethylene and 1‐hexene catalyzed by Cp2ZrCl2/MAO catalytic system. Polymer Engineering and Science.DOI
295. Lianfang Feng, Hui-Ming Zhang, Liang-Chao Li, Xi-Jun Shen, Xue-Ping Gu (2007). Bubble tower reactor with í«gas-liquidí» dispersion mixing device.
296. Guo-Hua Hu, Cai-Liang Zhang, Lianfang Feng, S. Hoppe (2007). A REACTIVE EXTRUSION PROCESS FOR THE SYNTHESIS OF POLYAMIDE GRAFT COPOLYMERS.
297. 王嘉骏，顾雪萍，杨富军，冯连芳（2006）. 双流体模型中曳力及恢复系数对气固流动的影响. 《高校化学工程学报》.
298. 王嘉骏，张文峰，冯连芳，顾雪萍（2006）. 气固搅拌流化床压力脉动的小波分析. 《化工学报》.
299. 王嘉骏，汤颜菲，张文峰，李良超，顾雪萍，冯连芳（2006）. 聚丙烯MZCR反应器提升管内颗粒RTD实验研究与CFD模拟. 《第三届全国化学工程与生物化工年会论文摘要集（上）》.
300. 顾雪萍，冯连芳，王嘉骏，汤志武，刘波（2006）. 乙烯淤浆聚合牌号过渡过程模拟与优化. 《第三届全国化学工程与生物化工年会论文摘要集（下）》.
301. 冯连芳，沈希军，张军，顾雪萍（2006）. 聚酯固相缩聚过程结晶行为与新流程方案研究. 《第三届全国化学工程与生物化工年会论文摘要集（上）》.
302. 汤颜菲，王嘉骏，冯连芳，顾雪萍（2006）. 提升管内气固流动行为的数值模拟. 《化学反应工程与工艺》.
303. Guo‐Hua Hu, Huxi Li, Lian‐Fang Feng (2006). Follow‐up of the course of the anionic ring‐opening polymerization of lactams onto an isocyanate‐bearing polymer backbone in the melt. Journal of Applied Polymer Science.DOI
304. Jianfeng Wang, Li Wang, Wenqin Wang, Tao Chen, Wei Wang, Tianxu Sun, Lianfang Feng, Haoqi Gao (2006). Study on Ethylene-α-Olefin Copolymerization Catalyzed by the MgCl2-Supported and Low Ti-Loading Ziegler–Natta Catalyst. Polymer-Plastics Technology and Engineering.DOI
305. C.-L. Zhang, Lianfang Feng, Guo‐Hua Hu (2006). Anionic polymerization of lactams: A comparative study on various methods of measuring the conversion of ε‐caprolactam to polyamide 6. Journal of Applied Polymer Science.DOI
306. Xianming Zhang, Zhongbin Xu, Lianfang Feng, Xiao‐Bo Song, Guo‐Hua Hu (2006). Assessing local residence time distributions in screw extruders through a new in‐line measurement instrument. Polymer Engineering and Science.DOI
307. Lianfang Feng (2006). Modeling of industrial reactors and processes for the polymeriszation of propylene.
308. Lianfang Feng (2006). Effects of Restitution Coefficient and Drag Force on Gas-solid Flow Behavior: A Two-fluid Model Simulation.
309. Lianfang Feng (2006). Influence of Processing Conditions on Percolation Threshold Value and Morphology of Co-continuous PA6/PS Blend.
310. 沈希军，张军，王嘉骏，冯连芳，蒋士成，汪燮卿（2005）. 聚酯切片流态化特性的研究. 《石油化工》.
311. 冯连芳，黎逢泳，顾雪萍，王嘉骏，汤志武，刘波（2005）. 丙烯液相本体聚合过程Polymers Plus建模与分析. 《石油化工》.
312. 栗广奉，李广赞，王嘉骏，顾雪萍，冯连芳（2005）. 卧式双轴自清洁反应器粘性体系停留时间分布. 《化学工程》.
313. 陈国南，李广赞，王嘉骏，冯连芳，顾雪萍，贾志刚（2005）. 泰勒反应器中流体流动及停留时间分布研究. 《化学工程》.
314. 冯连芳，黎逢泳，顾雪萍，汤志武，刘波（2005）. 丙烯液相本体聚合反应体系的物性计算方法. 《石油化工》.
315. 张才亮，许忠斌，冯连芳，王嘉骏，顾雪萍（2005）. 苯乙烯存在下马来酸酐熔融接枝聚丙烯的研究. 《高校化学工程学报》.
316. 雷华，徐宏彬，王兴仁，冯连芳，翁志学，徐国斌（2005）. 丙烯预聚合工艺的研究进展. 《合成树脂及塑料》.
317. Jianfeng Wang, Li Wang, Lian‐Fang Feng, Xue‐Ping Gu, Haojie Yu (2005). Studies on Synthesis of Low Isotactic Polypropylene by Using a Novel MgCl2-supported and Low Ti-loading Catalyst. Polymer-Plastics Technology and Engineering.DOI
318. Lian‐Fang Feng (2005). Experimental study of rheological behavior of inorganic filler/PDMS compounding system. China Elastomerics.
319. Jianfeng Wang, Li Wang, Haoqi Gao, Wenqin Wang, Wei Wang, Zhenrong Zhao, Tianxu Sun, Lianfang Feng (2005). Ethylene polymerization using a novel MgCl2/SiO2‐supported Ziegler–Natta catalyst. Polymer International.DOI
320. Li Wang, Haojie Yu, Zhenli Ma, Zhao‐Yang Ye, Shan Jiang, Lianfang Feng, Xue‐Ping Gu (2005). Preparation of novel MgCl2‐adduct supported spherical Ziegler–Natta catalyst for α‐olefin polymerization. Journal of Applied Polymer Science.DOI
321. Guo‐Hua Hu, Huxi Li, Lianfang Feng (2005). Rate of the activated anionic polymerisation of ε-caprolactam onto an isocyanate bearing polypropylene in the melt. Polymer.DOI
322. Lianfang Feng (2005). Experiment and Numerical Simulation on Slug Fluidization of Geldart D Particles.
323. Lianfang Feng (2005). THE DEVELOPMENT OF SIMULATION OF RESIDENCE TIME DISTRIBUTION IN SCREW EXTRUDERS.
324. 刘波，张才亮，冯连芳，许忠斌（2005）. PS-g-PA6制备及在PS/PA6体系的相容作用. 《现代塑料加工应用》.
325. 肖维箴，王嘉骏，顾雪萍，冯连芳（2004）. 对二甲苯氧化反应器冷态模拟实验研究. 《石油化工》.
326. 马振利，王立，王剑峰，王文钦，冯连芳，顾雪萍（2004）. 球形MgCl2负载Ziegler-Natta催化剂的制备及内给电子体作用机理的研究. 《石油化工》.
327. 陈凯，王嘉骏，顾雪萍，冯连芳，王凯（2004）. 双层搅拌器组合的气液分散性能研究. 《化学工程》.
328. 黎逢泳，顾雪萍，冯连芳，王嘉骏，汤志武，刘波（2004）. 基于Polymer Plus的工业丙烯液相聚合过程稳态模拟. 《第一届全国化学工程与生物化工年会论文摘要集(上)》.
329. 杨富军，王嘉骏，冯连芳，顾雪萍（2004）. 气固两相流模拟中曳力模型的研究. 《第一届全国化学工程与生物化工年会论文摘要集(上)》.
330. Haojie Yu, Li Wang, Zhaoyang Ye, Zhenli Ma, Shan Jiang, Jianfeng Wang, Lian‐Fang Feng, Xue‐Ping Gu (2004). Study on Morphology and Particle Size Distribution of Polypropene Catalyzed by Novel Spherical Ziegler–Natta Catalyst. Polymer-Plastics Technology and Engineering.DOI
331. Zhenli Ma, Li Wang, Wenqin Wang, Lianfang Feng, Xueping Gu (2004). Study of propylene polymerization catalyzed by a spherical MgCl2‐supported Ziegler–Natta catalyst system: The effects of external donors. Journal of Applied Polymer Science.DOI
332. Lianfang Feng, Guo‐Hua Hu (2004). Reaction kinetics of multiphase polymer systems under flow. AIChE Journal.DOI
333. Zhong-Bin Xu, Lianfang Feng, Jian Pan, Jia-Jun Wang, Xue-Ping Gu, Tao Wu (2004). Polymer residence time distribution on-line measuring system.
334. 顾雪萍，冯连芳，王嘉骏，刘烨，王凯（2003）. 泛能式搅拌桨搅拌特性研究. 《化学工程》.
335. 王嘉骏，顾雪萍，冯连芳，王凯（2003）. 搅拌设备化工预设计专家系统的知识处理. 《计算机与应用化学》.
336. 梁建平，顾雪萍，叶跃昇，王嘉骏，冯连芳，王文清（2003）. 苯乙烯工业预聚过程牌号切换策略研究. 《高校化学工程学报》.
337. 雷华，徐宏彬，冯连芳，杨爱武，翁志学，徐国斌（2003）. Ziegler-Natta催化丙烯聚合中氢气的作用. 《石油化工》.
338. Guo‐Hua Hu, Hervé Cartier, Lian‐Fang Feng, Bo‐Geng Li (2003). Kinetics of the in situ polymerization and in situ compatibilization of poly(propylene) and polyamide 6 blends. Journal of Applied Polymer Science.DOI
339. Guo-Hua Hu, Lianfang Feng (2003). Extruder processing for nanoblends and nanocomposites.DOI
340. Guo-Hua Hu, Huxi Li, Lianfang Feng, L. Pessan (2003). Strategies for maximizing free‐radical grafting reaction yields.DOI
341. 叶跃昇，王嘉骏，顾雪萍，冯连芳，王凯，王文清（2002）. 苯乙烯连续搅拌釜式本体聚合工业过程模拟. 《高校化学工程学报》.
342. 李凡，冯连芳，顾雪萍，王凯，刘波（2002）. 气固搅拌流化床的床层压降. 《高校化学工程学报》.
343. 冯连芳，王嘉骏，王凯，顾雪萍（2002）. 流体混合技术新进展. 《化学工程》.
344. 王嘉骏，冯连芳，顾雪萍，王凯（2002）. 搅拌设备的智能化化工预设计. 《化学工程》.
345. Zhao‐Yang Ye, Li Wang, Lian‐Fang Feng, Xue‐Ping Gu, Hai‐Hua Chen, Puyu Zhang, Jie Pan, Shan Jiang, Linxian Feng (2002). Novel spherical Ziegler–Natta catalyst for polymerization and copolymerization. I. Spherical MgCl2 support. Journal of Polymer Science Part A Polymer Chemistry.DOI
346. Guo-Hua Hu, Huxi Li, Lianfang Feng (2002). A theoretical model for quiescent coarsening in immiscible polymer blends.DOI
347. Guo-Hua Hu, Huxi Li, Lianfang Feng (2002). A Two-Step Reactive Extrusion Process for the Synthesis of Graft Copolymers with Polyamides as Grafts.DOI
348. 马青山，冯连芳，陈鹏飞，王凯（2001）. 搅拌流化床搅拌功率研究. 《化学工程》.
349. 王嘉骏，冯连芳，王凯，顾雪萍（2001）. LDV和CFD在流体混合中的应用进展. 《化学工程》.
350. 王文清，马青山，冯连芳，王凯（2001）. 小分子物质在聚烯烃粒子内的传质. 《化学工程》.
351. 范荣，李伯耿，刘伟，曹堃，冯连芳，周文乐，沈之刚，叶蒙（2001）. 均相茂金属催化剂催化苯乙烯间规聚合中搅拌的作用. 《高校化学工程学报》.
352. JIA-JUN WANG, Lianfang Feng, XUE-PLNG GU, Kai Wang (2001). A FUZZY DECISION-MAKING COMPUTER AIDED SYSTEM FOR THE PRELIMINARY SELECTION OF AGITATOR. Chemical Engineering Communications.DOI
353. 徐世艾，冯连芳，顾雪萍，王凯（2000）. 搅拌釜中自浮颗粒三相体系的混合时间. 《高校化学工程学报》.
354. 冯连芳，赵轶，顾雪萍，王凯（2000）. 卧式双轴T型搅拌器在非牛顿流体中的搅拌功率特性. 《化学反应工程与工艺》.
355. 冯连芳，马青山，陈鹏飞，顾雪萍，王凯（2000）. 搅拌流化床流化特性实验研究. 《化学工程》.
356. 徐世艾，冯连芳，顾雪萍，王凯（2000）. 通气条件下桨型对自浮颗粒悬浮的影响. 《化学工程》.
357. 王嘉骏，冯连芳，顾雪萍，王凯（2000）. 搅拌设备化工设计系统的混合知识表达机制. 《计算机与应用化学》.
358. 王嘉骏，冯连芳，顾雪萍，王凯（2000）. 搅拌设备化工预设计专家系统的黑板系统结构. 《计算机与应用化学》.
359. J.-J Wang, Lianfang Feng, Xue‐Ping Gu, K Wang, C.-H Hu (2000). Power consumption of inner–outer helical ribbon impellers in viscous Newtonian and non-Newtonian fluids. Chemical Engineering Science.DOI
360. Liu Wang, P. Y. Zhang, Lianfang Feng, Bing Ji, Y. L. Yuan, Jie Pan, C. Y. Ye, Shan Jiang, L. X. Feng (2000). ESR studies on vanadocene/cocatalyst systems for ethylene polymerization. Journal of Applied Polymer Science.DOI
361. Sang Xu, Lianfang Feng, X.-P. Gu, Kai Wang, Guo-Hua Hu (2000). Gas‐Liquid Floating Particle Mixing in an Agitated Vessel.DOI
362. 马青山，冯连芳，顾雪萍，王凯（1999）. 粒子反应器技术及其聚烯烃工业应用. 《化工进展》.
363. 冯连芳，王嘉骏，顾雪萍，王凯（1999）. 搅拌器选型专家系统的知识处理和系统实现. 《计算机与应用化学》.
364. 王嘉骏，冯连芳，顾雪萍，王凯（1999）. 内外单螺带式搅拌器的Metzner常数. 《高校化学工程学报》.
365. 王嘉骏，冯连芳，顾雪萍，王凯（1999）. 锚式搅拌器功率消耗与Metzner常数研究. 《化学工程》.
366. 马青山，冯连芳，顾雪萍，王凯（1999）. 卧式单轴粉体搅拌反应器的搅拌功率. 《高校化学工程学报》.
367. 冯连芳，顾雪萍，王凯（1999）. 搅拌反应器中反应热的实时监测 Ⅰ确定性动态模型的量热法. 《化学反应工程与工艺》.
368. 王嘉骏，冯连芳，顾雪萍，王凯（1999）. 层次分析法在搅拌器选型中的应用. 《计算机与应用化学》.
369. 马青山，冯连芳，张立锋，王凯，张玉清，封麟先（1999）. 丙烯为主单体的烯烃共聚合金的研究. 《石油化工》.
370. 徐世艾，冯连芳，顾雪萍，王凯（1999）. 桨型和挡板对自浮颗粒三相体系混合的影响. 《高校化学工程学报》.
371. 黄文谦，冯连芳，顾雪萍（1998）. 天然高分子甲壳素/壳聚糖的最新进展. 《化工进展》.
372. Deming Mao, Lian‐Fang Feng (1998). Reply to fort. The Canadian Journal of Chemical Engineering.DOI
373. 于鲁强，戴志潜，冯连芳，王凯，范西俊（1997）. 刮壁搅拌桨的最优设计. 《化学工程》.
374. 徐世艾，冯连芳，王凯（1997）. 国内外BR溶液凝聚的进展. 《齐鲁石油化工》.
375. 毛德明，冯连芳，王凯（1997）. 搅拌槽内的总体泵送能力系数. 《化学工程》.
376. Deming Mao, Lian‐Fang Feng, Kai Wang, Yu‐Ling Li (1997). The mean flow field generated by a pitched blade turbine: Changes in the circulation pattern due to impeller geometry. The Canadian Journal of Chemical Engineering.DOI
377. Guoqing Xu, Y. M. Li, Zhichao Hou, Lianfang Feng, Kai You Wang (1997). Gas—liquid dispersion and mixing characteristics and heat transfer in a stirred vessel. The Canadian Journal of Chemical Engineering.DOI
378. Guo-Jun Xu, Lianfang Feng, Yun-Ming Li, Kai Wang (1997). PRESSURE DROP OF PSEUDO-PLASTIC FLUIDS IN STATIC MIXERS.
379. 于鲁强，刘烨，冯连芳，王凯（1996）. 刮壁桨搅拌功耗机理. 《化学反应工程与工艺》.
380. 毛德明，冯连芳，许国军，李允明，李玉麟，王凯（1996）. 用LDA研究搅拌釜内的流场. 《高校化学工程学报》.
381. 冯连芳，高彦芳，王凯（1993）. 悬浮聚合用HAP/SDBS无机分散体系的作用机理. 《化学反应工程与工艺》.

书籍章节

1. Zhiliang Zhan, Zhijiang Shao, Xi Chen, Yuhong Zhao, Xue‐Ping Gu, Zhen Yao, Lian‐Fang Feng (2012). Steady-state optimization of an industrial high-density polyethylene slurry process based on an equation-oriented molecular weight distribution model. Computer-aided chemical engineering/Computer aided chemical engineering.DOI