李东明｜大连民族大学｜学者主页

2026

PZT压电厚膜压力传感器制造工艺研究

戴夏超，赵奎鹏，李东明，朴元彪，喻武，路明春

《机电工程技术》

2026

A laminated hybrid structure of bulk PZT and electrohydrodynamically printed thick films for miniature modal composite piezoelectric motors

Kuipeng Zhao, Fangshun Teng, Yuchi Liu, Z Huang, Feng Wang, Yuanbiao Piao, Weidong Guo, Yunhao Cui, Dongming Li

Ceramics International

DOI

2026

Poisson's ratio mismatch-induced strengthening of epoxy/dual re-entrant auxetic Ti-6Al-4V interpenetrating metamaterials

Dongming Li, Zhihui Wang, Xintian Zhao, Yonghai Yu, Xu Zhang, Jian-Xin Xu, Bingzhi Chen

Composites Part B: Engineering

DOI

2026

Design and energy absorption performance of gradient-Orowan synergistically strengthened lattice structures

Dongming Li, Long Guo, Jiasen Si, Zhihui Wang, Bingzhi Chen, Xu Zhang, Junxian Zhou

Materials & Design

DOI

2026

The influence of particle size distribution on the microstructure and mechanical properties of AlSi10Mg alloy produced by selective laser melting

Xu Zhang, Maoning Ge, Peng Zhang, Dongming Li, Bingzhi Chen

Materials Science & Engineering: A

DOI

2026

Spiral bionic design enhances the compression performance and deformation mode of thin-walled structures

Dongming Li, Yonghai Yu, Xintian Zhao, Zhihui Wang, Jiasen Si, Long Guo, Bingzhi Chen, Xu Zhang

Materials & Design

DOI

2026

Energy Absorption and Deformation Behavior of Bionic Lattice Structures with Bidirectional Gradient Distribution

Dongming Li, Jiasen Si, Tongyuan Sun, Long Guo, Bingzhi Chen, Xu Zhang, Jian-Xin Xu

Journal of Bionic Engineering

DOI

2025

Hydrolysis behavior and mechanism of AlON powders

Jian-Xin Xu, Dongming Li, Jian Song, Delei Du, Xu Zhang

Materials & Design

DOI

2025

Crystal plasticity coupled continuum damage mechanics model for high-temperature creep behavior of T91 steel

Tengfei Li, Shi-Jie Song, Jianfeng Zhao, Qian-Hua Kan, Dongming Li, Xu Zhang

International Journal of Solids and Structures

DOI

2025

Design and analysis of biomimetic nested lattice structures based on additive manufacturing

Dongming Li, Long Guo, Tongyuan Sun, Jiasen Si

Alexandria Engineering Journal

DOI

2025

Design and analysis of multiple bio-inspired aperiodic lattice structures by laser powder bed fusion

Dongming Li, Tongyuan Sun, Bingzhi Chen, Xu Zhang

Materials & Design

DOI

2025

Design and strengthening of dual bio-inspired lattice structures based on additive manufacturing

Tongyuan Sun, Bingzhi Chen, Deyu Yue, Dongming Li

Alexandria Engineering Journal

DOI

2024

Effect of Cladding Fe-Based Coating on the Microstructure, Wear Resistance, and Dynamic Performance of CL60 Steel

Xu Zhang, Tianyu Guan, Dongming Li, Xiangcheng Cui, Bingzhi Chen

Journal of materials engineering and performance (Print)

DOI

2024

Mechanical properties and energy absorption of CoCrNi functionally graded TPMS cellular structures

Zhaoyi Wang, Junxian Zhou, Yunzhuo Lu, Dongming Li, Deyu Yue, Xu Zhang, Bingzhi Chen

Journal of Materials Research and Technology

DOI

2024

Effect of remelting strategy on forming mechanism of selective laser melted AlSi10Mg

Deyu Yue, Xu Zhang, Dongming Li, Zhuo-Feng Li, Zhaoyi Wang, Bingzhi Chen

Journal of Materials Research and Technology

DOI

2024

Effect of cooling rates and heat treatment time on Si phase of AlSi10Mg alloy manufactured by selective laser melting: Microstructure evolution and strengthening mechanism

Xu Zhang, Shengsheng Chen, Zhaoyi Wang, Dongming Li, Xiangcheng Cui, Jian-Xin Xu

Journal of Alloys and Compounds

DOI

2024

Hierarchical design and coupling deformation of lattice structures with variable unit cells manufactured by laser powder bed fusion

Dongming Li, Bingzhi Chen, Deyu Yue, Tongyuan Sun, Xu Zhang

Thin-walled structures

DOI

2024

Mechanical properties and energy absorption of medium-entropy alloy triply periodic minimal surface cellular structures fabricated via selective laser melting

Zhaoyi Wang, Bingzhi Chen, Yunzhuo Lu, Junxian Zhou, Dongming Li, Deyu Yue, Xu Zhang

Mechanics of materials (Print)

DOI

2024

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

Zhaoyi Wang, Deyu Yue, Dongming Li, Bingzhi Chen

The International Journal of Advanced Manufacturing Technology

DOI

2021

径向包容式超声悬浮轴承结构优化

李东明，王万雷，贾颖，吕帅

《光学精密工程》

2021

Influence of Aging Temperature on Metallurgy, Impact Toughness and Pitting Behavior of Flux-Cored Arc Welded 2205 Duplex Stainless Steel Joint

Ying-Ying Zhang, Zheng-Jun Liu, Dongming Li

DOI

2020

Research on Bearing Capacity Parameters of Radial Enveloping Ultrasonic Levitation Bearing

Lv Shuai, LI Dong-ming, Shen Wenqiang

World Conference on Mechanical Engineering and Intelligent Manufacturing (WCMEIM)

DOI

2020

Design and experimental study of concave longitudinal vibration piezoelectric ultrasonic transducer

Shen Wenqiang, Ying Gang Jia, LI Dong-ming, Lv Shuai

International Conference on Electron Device and Mechanical Engineering (ICEDME)

DOI

2020

Effect of Fe on the high-temperature tribological behavior of NiAl/WC-Fex self-lubricating composites produced by thermal explosion

Xin-Ying Liu, Jian Yuan, S. Lou, Dongming Li, Wen-Quan Cheng

Materials Research Express

DOI

2019

压电驱动的超声悬浮精密轴承静动态承载特性

贾颖，李东明，赵玉龙，崔云先，费继友

《光学精密工程》

2019

压电驱动微动平台结构的设计优化和仿真分析

李东明，柴长忠，沈文强，王彦琪，崔云先

《压电与声光》

2018

压电陶瓷驱动微进给刀架的迟滞建模

李东明，罗姜，李丽，叶红盼

《压电与声光》

2018

压电陶瓷驱动微进给刀架结构优化设计与实验研究

李东明，叶红盼，罗姜，李丽

《大连交通大学学报》

2017

Thermodynamic Analysis of Ni-Al-WC System during Self-Propagating High Temperature Synthesis

Jian Yuan, Xin-Ying Liu, Dongming Li, S. Lou

DOI

2016

微进给刀架中位移放大机构的优化设计

李东明，王顺

《压电与声光》

2014

超声波轴承用挤压式压电换能器的共振频率

李东明，崔爽，丛琳皓，王道顺，崔玉国

《光学精密工程》

2014

超声轴承用压电换能器结构设计与有限元分析

李东明，崔爽，丛琳皓，王道顺，崔玉国

《压电与声光》

2014

Simulation and Measurement of Fuel Injection Quantity Based on TB4P

Dongming Li, Jianzhong Zhang, Jian-Jun Yuan, Fancan Guo, Hui-Ming Wang

J. Robotics Mechatronics

DOI

2008

压电结构电气转换装置结构设计与实验研究

李东明，孙宝元，王伟

《压电与声光》

2004

一种薄膜电子式电—气转换机构及其关键技术研究

张化岚，孙宝元，李东明

《仪器仪表学报》

2004

压电结构电/气转换装置的研制及其特性分析

李东明，孙宝元

《压电与声光》

李东明

精选作品

期刊论文

PZT压电厚膜压力传感器制造工艺研究

A laminated hybrid structure of bulk PZT and electrohydrodynamically printed thick films for miniature modal composite piezoelectric motors

Poisson's ratio mismatch-induced strengthening of epoxy/dual re-entrant auxetic Ti-6Al-4V interpenetrating metamaterials

Design and energy absorption performance of gradient-Orowan synergistically strengthened lattice structures

The influence of particle size distribution on the microstructure and mechanical properties of AlSi10Mg alloy produced by selective laser melting

Spiral bionic design enhances the compression performance and deformation mode of thin-walled structures

Energy Absorption and Deformation Behavior of Bionic Lattice Structures with Bidirectional Gradient Distribution

Hydrolysis behavior and mechanism of AlON powders

Crystal plasticity coupled continuum damage mechanics model for high-temperature creep behavior of T91 steel

Design and analysis of biomimetic nested lattice structures based on additive manufacturing

Design and analysis of multiple bio-inspired aperiodic lattice structures by laser powder bed fusion

Design and strengthening of dual bio-inspired lattice structures based on additive manufacturing

Effect of Cladding Fe-Based Coating on the Microstructure, Wear Resistance, and Dynamic Performance of CL60 Steel

Mechanical properties and energy absorption of CoCrNi functionally graded TPMS cellular structures

Effect of remelting strategy on forming mechanism of selective laser melted AlSi10Mg

Effect of cooling rates and heat treatment time on Si phase of AlSi10Mg alloy manufactured by selective laser melting: Microstructure evolution and strengthening mechanism

Hierarchical design and coupling deformation of lattice structures with variable unit cells manufactured by laser powder bed fusion

Mechanical properties and energy absorption of medium-entropy alloy triply periodic minimal surface cellular structures fabricated via selective laser melting

Process parameter optimization and mechanical properties for selective laser melting of AlSi10Mg alloy

径向包容式超声悬浮轴承结构优化

Influence of Aging Temperature on Metallurgy, Impact Toughness and Pitting Behavior of Flux-Cored Arc Welded 2205 Duplex Stainless Steel Joint

Research on Bearing Capacity Parameters of Radial Enveloping Ultrasonic Levitation Bearing

Design and experimental study of concave longitudinal vibration piezoelectric ultrasonic transducer

Effect of Fe on the high-temperature tribological behavior of NiAl/WC-Fex self-lubricating composites produced by thermal explosion

压电驱动的超声悬浮精密轴承静动态承载特性

压电驱动微动平台结构的设计优化和仿真分析

压电陶瓷驱动微进给刀架的迟滞建模

压电陶瓷驱动微进给刀架结构优化设计与实验研究

Thermodynamic Analysis of Ni-Al-WC System during Self-Propagating High Temperature Synthesis

微进给刀架中位移放大机构的优化设计

超声波轴承用挤压式压电换能器的共振频率

超声轴承用压电换能器结构设计与有限元分析

Simulation and Measurement of Fuel Injection Quantity Based on TB4P

压电结构电气转换装置结构设计与实验研究

一种薄膜电子式电—气转换机构及其关键技术研究

压电结构电/气转换装置的研制及其特性分析

研究方向