张群兵｜西安航空学院｜学者主页

2024

激光线能量对TC17钛合金焊接接头组织和疲劳性能的影响（英文）

任利娜，张群兵，雷晓维，齐亮，杨家典，张建勋

《稀有金属材料与工程》

2024

TC17/Ti60异种钛合金激光焊接接头微观组织和低周疲劳性能研究

张群兵，张阔，于佳恩，李帆，吕泉霖，行海波，孙康，张建勋

《钛工业进展》

2024

Ti60钛合金激光焊接接头微观组织与低周疲劳性能研究

张群兵，张阔，于佳恩，张勇进，陈旭飞，陈立明，张建勋

《西安航空学院学报》

2024

TC17钛合金激光焊接接头微观组织和力学性能

张群兵，东拓，谭猛猛，门浩翔，张建勋

《机械制造文摘(焊接分册)》

2024

Effect of Laser Heat Input on the Microstructures and Low-Cycle Fatigue Properties of Ti60 Laser Welded Joints

Qunbing Zhang, Lina Ren, Xiaowei Lei, Jiadian Yang, Kuo Zhang, Jianxun Zhang

Crystals

DOI

2024

Two fatigue fracture modes at different temperatures of 10%Cr heat-resistant steel weldment filled with Ni-based alloy

Qunbing Zhang, Lina Ren, Xiaowei Lei, Wenlan Wei, Jianxun Zhang

Engineering Failure Analysis

DOI

2024

Insight into the pitting corrosion behavior of laser‐welded R60702 zirconium alloy in chloride electrolyte

Lina Ren, Dayuan Wang, Liang Qi, Mengyuan Ye, Zhuang Miao, Qunbing Zhang, Jianxun Zhang, Xiaowei Lei

Materials and Corrosion

DOI

2022

Mechanical properties and fracture behaviour of in situ dendrite-intermetallic Ti-based bulk metallic glass composites

Sen Yang, Mingcan Li, Peng Cao, Long Zhang, Qunbing Zhang, Boyu Cai, Yong Fang

Materials Science and Engineering A

DOI

2021

10%Cr耐热钢/镍基合金焊接接头高温疲劳性能

张群兵，张建勋，魏文澜

《焊接》

2021

Enhanced mechanical properties of dendrite-reinforced Ti-based bulk metallic glass composites by tuning the microstructure

Sen Yang, Mingcan Li, Peng Cao, Qunbing Zhang, Lin He

Intermetallics

DOI

2019

Microstructural characteristics and low cycle fatigue properties at 230 °C of different weld zone materials from a 100 mm thick dissimilar weld of ultra-supercritical rotor steel

Jian Ping Long, Lin‐Jie Zhang, Qunbing Zhang, Wenke Wang, Jie Ping Zhong, Jianxun Zhang

International Journal of Fatigue

DOI

2015

预热温度对12Cr10Co3W2Mo耐热钢焊接冷裂纹敏感性的影响

张群兵，牛靖，赵鹏飞，黄勇，李志刚，张建勋

《焊接学报》

张群兵

精选作品

期刊论文

激光线能量对TC17钛合金焊接接头组织和疲劳性能的影响（英文）

TC17/Ti60异种钛合金激光焊接接头微观组织和低周疲劳性能研究

Ti60钛合金激光焊接接头微观组织与低周疲劳性能研究

TC17钛合金激光焊接接头微观组织和力学性能

Effect of Laser Heat Input on the Microstructures and Low-Cycle Fatigue Properties of Ti60 Laser Welded Joints

Two fatigue fracture modes at different temperatures of 10%Cr heat-resistant steel weldment filled with Ni-based alloy

Insight into the pitting corrosion behavior of laser‐welded R60702 zirconium alloy in chloride electrolyte

Mechanical properties and fracture behaviour of in situ dendrite-intermetallic Ti-based bulk metallic glass composites

10%Cr耐热钢/镍基合金焊接接头高温疲劳性能

Enhanced mechanical properties of dendrite-reinforced Ti-based bulk metallic glass composites by tuning the microstructure

Microstructural characteristics and low cycle fatigue properties at 230 °C of different weld zone materials from a 100 mm thick dissimilar weld of ultra-supercritical rotor steel

预热温度对12Cr10Co3W2Mo耐热钢焊接冷裂纹敏感性的影响

研究方向