姜周华

期刊论文

1. 姜周华，陈玺，王骜，董艳伍（2026）. CaF2基渣系电导率的机器学习预测及离子传输机制. 《东北大学学报(自然科学版)》.
2. 孙欣，王鑫伟，曹俊泽，周伟基，姚玉东，董艳伍，姜周华（2026）. SiO2对抽锭式电渣渣系析出相和高温结构的影响. 《特殊钢》.DOI
3. 孙欣，崔金鹏，曹俊泽，姜周华，周伟基，姚玉东，耿鑫（2026）. 脱氧制度对电渣重熔304NG不锈钢中夹杂物的影响. 《材料与冶金学报》.DOI
4. 张云飞，战东平，李吉航，姜周华（2026）. 稀土La对2.0 GPa超高强度钢中夹杂物和性能的影响. 《材料与冶金学报》.DOI
5. 李阳，朱红春，陆泓彬，姜周华，李花兵（2026）. 基于二分法的电弧炉终点熔池温度智能调控. 《中国冶金》.
6. Z. Yao, Chang-Yong Chen, Zhou-Hua Jiang, Yang Li（2026）. 镀锌时间对桥梁缆索用钢丝组织及扭转性能的影响 (Effect of galvanizing time on microstructure and torsional properties of steel wire for bridge cable). Social Science Research Network.DOI
7. Lingfeng Xia, Haojia Chen, Yang Li, Hao Yang, Peng-Chong Lu, Zhuo Ni, Wenyu Li, Yahang Wang, Dafang Zhang, Zhou-Hua Jiang (2026). Optimization of inclusion removal in spring steel with Rb2O-containing refining slag. Journal of Materials Research and Technology.DOI
8. Zhou-Hua Jiang, Yang Li, Wei Gong, Chang-Yong Chen（2026）. 特殊钢棒线材洁净冶炼技术 (Clean steel smelting technology for bar and wire of special steels). Social Science Research Network.DOI
9. Ya-Feng Wang, Yang Li, Yuexu Liu, Tuo Wang, Jia-Ying Pei, Lin Bo, Zhou-Hua Jiang, Chang-Yong Chen (2026). Effect of Mg on inclusions, microstructure, and mechanical properties of hot work die steel melted under pressurization. High Temperature Materials and Processes.DOI
10. Zhou-Hua Jiang, Meng Sun, Yang Li, Chang-Yong Chen（2026）. 汽车用特殊钢中夹杂物控制技术的研究进展 (State of the Art in the Control of Inclusions in Special Steel for Automobile- A Review). Social Science Research Network.DOI
11. Shuai Ma, Yang Li, Zhou-Hua Jiang, Meng Sun, Zhen-Xing Mi, Hao Wang, Yun-qie Mao, Yan-Shuo Ma (2026). Thermal simulation study on the effect of ladle glaze on inclusions and refractories during the smelting process of Si-Mn killed spring steel 55SiCr. Ironmaking & Steelmaking: Processes, Products and Applications.DOI
12. Zhiyu He, Xinbo Yan, Hongchun Zhu, Hua-Bing Li, Zhuo Ni, Hao Feng, Shu-Cai Zhang, Zhou-Hua Jiang, Xiangxiang Shi (2026). Mechanistic Study of Ce Addition Increasing Feeding Resistance During Formation of Porosity in Ferrium M54 Ingots. Metallurgical and Materials Transactions B.DOI
13. Zhiyu He, Bao-Quan Feng, Hongchun Zhu, Hua-Bing Li, Yang Zhou, Zhuo Ni, Hao Feng, Shu-Cai Zhang, Zhou-Hua Jiang, Zhong-Qiu Liu (2026). Revealing the Solute-Induced Mechanisms Controlling Dendrite Growth and CET in High-Nitrogen Super-Austenitic Stainless Steel. Metallurgical and Materials Transactions B.DOI
14. Hongbin Lu, Hongchun Zhu, Zhou-Hua Jiang, Hua-Bing Li, Ce Yang (2026). Assessment of Multiple Hybrid Modeling Approaches Combining Mechanistic and Machine Learning Methods for Endpoint Temperature Prediction in Electric Arc Furnace. Metallurgical and Materials Transactions B.DOI
15. Ce Yang, Hongchun Zhu, Zhou-Hua Jiang, Hua-Bing Li, Hongbin Lu, Zhong-hao Wang, Teng Li, Zhuo Ni, Zhi-Yu He (2026). Investigation on Melting of Isolated Metallized Pellet in Varied Melt Pool During Electric Arc Furnace. Journal of Sustainable Metallurgy.DOI
16. Di-Yue Li, Shuoyang Zhang, Peng Hua, Jia-Long Tian, Hua-Bing Li, Hai-Feng Zhang, Zhou-Hua Jiang (2026). Improving the strength, ductility and toughness of martensitic stainless steels via nanoscale carbonitrides. Journal of Materials Research and Technology.DOI
17. Zhimin You, Zhijie Lai, Yanan Yu, Yi Wang, Wenjing Wang, Binhe Wu, Wenkai Ma, Jong-Jin Pak, Zhou-Hua Jiang (2026). A Systematic Study on Nitrogen Solubility in Liquid Nickel: Extending Sieverts’ Law Validation Over Wide Temperature-Pressure Ranges. Metallurgical and Materials Transactions B.DOI
18. Hongbin Lu, Hongchun Zhu, Zhou-Hua Jiang, Hua-Bing Li, Ce Yang (2026). A Prediction Model for Endpoint Carbon Content in the Electric Arc Furnace Based on the Fusion of Metallurgical Mechanisms and Decision Tree-Based Ensemble Learning Algorithms. Metallurgical and Materials Transactions B.DOI
19. Hao Li, Hao Feng, Hua-Bing Li, Fang Cao, Qingfeng Tan, Jing Dai, Peng-Chong Lu, Hongchun Zhu, Shu-Cai Zhang, Deli Chen, Zhou-Hua Jiang (2026). Combining Nickel Alloying and Heterostructure to Overcome the Strength‐Ductility Tradeoff in High Nitrogen Austenitic Stainless Steel. Steel Research International.DOI
20. Hai-Jian Wang, Hao Feng, Hua-Bing Li, Peng-Chong Lu, Jing Dai, Hongchun Zhu, Shu-Cai Zhang, Zhiyu He, Zhou-Hua Jiang (2026). Nitrogen-driven variant selection simultaneously enhances strength and toughness of martensitic steel. Journal of Materials Science & Technology.DOI
21. Shu-Cai Zhang, Jilei Wang, Teng Ban, Hua-Bing Li, Bin-Bin Zhang, Jin-Yao Ma, Shuwen Qian, Junyu Ren, Hao Feng, Hongchun Zhu, Zhou-Hua Jiang (2026). Enhanced strength-ductility synergy of super austenitic stainless steel via Nb microalloying with cold rolling-annealing treatment. Materials Characterization.DOI
22. Yang Li, Chang-Yong Chen, Meng Sun, Zhou-Hua Jiang（2026）. Mg 处理对 30CrNi2MoVA 钢夹杂物的影响 (Effect of magnesium treatment on inclusions in 30CrNi2MoVA steel). Social Science Research Network.DOI
23. Yang Li, Chang-Yong Chen, Zhou-Hua Jiang（2026）. 稀土元素对超级铁素体不锈钢组织及性能的影响 (Effect of rare earth elements on the structure and properties of super ferritic stainless steel). Social Science Research Network.DOI
24. Xi Chen, Wei-Yao Liang, Yanwu Dong, Ao Wang, Zhou-hua JIANG, Yu-Xiao Liu (2026). Mechanism-guided multi-scale modeling of ESR slag viscosity in CaF2–CaO–Al2O3/SiO2 via microstructural analysis and adaptive multi-source ensemble learning. Journal of Iron and Steel Research International.DOI
25. Ce Yang, Hong‐Chun Zhu, Zhou-hua JIANG, Hua-Bing Li, Hong-Bin Lu, Zhonghao Wang, Ze-Xuan Wu, Teng Li, Zhuo‐Wen Ni, Zhiyu He (2026). Revealing the Melting Process and Bonding Behavior of Multiple Metallized Pellets in the Slag–Iron Bath. Metallurgical and Materials Transactions B.DOI
26. Guang-Han Xin, Xin Geng, Xue-Yang Ma, Si-Qi Ren, Zhou-hua JIANG, Fu-Bin Liu (2026). Control of residual δ-ferrite content in nuclear-grade 316H stainless steel and its impact on mechanical properties. Journal of Iron and Steel Research International.DOI
27. Rui Zhang, Hong‐Chun Zhu, Hua-Bing Li, Zhou-hua JIANG, Zhiyu He, Zhuo‐Wen Ni, Yu-Jie Zheng, Hao Feng, Shucai Zhang (2026). Inhibiting surface crack propagation of S32654 by feeding strip into continuous casting mold. Journal of Iron and Steel Research International.DOI
28. Yuan Li, Zhou-hua JIANG, Ao Wang, Shan Cui, Jialong Tian (2026). Self-Constructed High-Dimensional Spatial Regionalized Learning Models for Predicting Key Physical Properties of Slag: A Case Study on CaF2–Al2O3–CaO–MgO–SiO2 Slag System. Metallurgical and Materials Transactions B.DOI
29. Yang Zhou, Zhiyu He, Hong‐Chun Zhu, Hua-Bing Li, Xingfei Xie, Zhuo‐Wen Ni, Zhou-hua JIANG, Hao Feng, Shu-Cai Zhang, Jing-Long Qu (2026). Unveiling the influence mechanism of Ta alloying on dendrite morphology in 16Co10W8Cr5Al nickel-based superalloy. Journal of Alloys and Compounds.DOI
30. Peng‐Chong Lu, Jian-He Cui, Hao Feng, Huabing Li, Jing Dai, Guo-Qing Ren, Hong‐Chun Zhu, Shu-Cai Zhang, Liangliang Zhang, Fu-Bin Liu, Zhong-Qiu Liu, Zhou-hua JIANG (2026). A novel approach for enhancing corrosion resistance of high-nitrogen stainless steels by optimizing inclusion characteristics: Utilizing newly designed slag and Ce-Mg alloy during pressurized electro-slag remelting. Corrosion Science.DOI
31. Zhuo‐Wen Ni, Hong‐Chun Zhu, Huabing Li, Ding-Xu Hou, Zhi-Yu He, Jian-Xin Wang, Bin Li, Zhou-hua JIANG, Shu-Cai Zhang, Hao Feng (2026). Oxygen-enriched combustion of flue gas for scrap preheating: computational optimization of energy conservation and emissions reduction in electric arc furnace steelmaking. Applied Thermal Engineering.DOI
32. Jingbao Gao, Hong‐Chun Zhu, Huabing Li, Ce Yang, Zhuowen Ni, Z. Y. He, Zhouhua Jiang, Shucai Zhang, Hao Feng (2026). Multi-step deep deoxygenation of GH4141 superalloy via C, Al, and Ni-Mg alloy during vacuum induction melting: Theory fundamentals and experimental validation. Vacuum.DOI
33. Wenchao Zhang, Zhouhua Jiang, 冷永磊, Fu-Bin Liu, X. Y. Yin, LiKun Ren, Wei XING, Yingnan Zhang (2026). Numerical Prediction of Shrinkage Cavity Location at the Tail End of Ф800 mm Large Section Round Billets During Continuous Casting With Different Submerged Entry Nozzle Port Structures. steel research international.DOI
34. Hongbin Lu, Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Ce Yang, Zhonghao Wang, Teng Li, Yang Li (2026). Front Cover: High‐Precision Prediction Model for Electric Arc Furnace Steel Endpoint Temperature Using Interpretable Machine Learning With In‐Depth Analysis of Driving Factors (steel research int. 9/2026). steel research international.DOI
35. Xiaobing Zhang, Dongping Zhan, Changjun Xu, Xu Jichen, Haodong Zhai, Peng Li, Zhouhua Jiang (2026). Influence of Mold Geometry on Solidification Behavior and Solute Segregation in Low‐Alloy Steel Ingots. steel research international.DOI
36. Shucai Zhang, Teng Ban, Huabing Li, Binbin Zhang, Jinyao Ma, Junyu Ren, Hao Feng, Hong‐Chun Zhu, Hongyan Zhong, Guoping Li, Zhouhua Jiang (2026). Enhancing strength and toughness of Crofer 22 H stainless steel for SOFC interconnects through optimizing lanthanum content. Journal of Materials Research and Technology.DOI
37. Chengyi Wang, Libin Yang, Wei Wu, Guangheng Ji, Yuxiang Dai, Guoqiang Wei, Zhouhua Jiang (2026). Thermal Simulation Experiments on Smelting Characteristics and Dephosphorization in Converter with High Scrap Ratio. Metals.DOI
38. Xi Chen, Yanwu Dong, Donghai Zhang, Zhouhua Jiang, Yuxiao Liu, Weiyao Liang, Ming-xu Pan (2026). A framework based on experimental-and-auxiliary data fusion and robust multi-task neural networks for the prediction of melting points in electroslag systems. International Journal of Minerals Metallurgy and Materials.DOI
39. Shuainan Han, Y Zhang, L Z Liu, Chengyu Jiu, Ruixing Xue, Erfang Tian, Xin Geng, Zhouhua Jiang, Fu-Bin Liu (2026). Study on Slag Skin Solidification Behavior of Slag Systems for Lifting‐Mold‐Type Electroslag Remelting. steel research international.DOI
40. Yan Zhang, Dongping Zhan, Changjun Xu, Haodong Zhai, Ningning Liu, Honglin Guo, Luhao Ren, Yubo Pan, Zhouhua Jiang (2026). Electromagnetic Field-Induced Restructuring of Thermal and Flow Behavior in Cold-Core Steel Ingot Solidification. Metallurgical and Materials Transactions B.DOI
41. Yong Wang, Yanwu Dong, Zhouhua Jiang, Y Zhang, L.B. Medovar, Ganna Stovpchenko (2026). Influence of Melting Rate on Composite Ingot by Electroslag Remelting Additive Manufacturing. steel research international.DOI
42. Zhimin You, Zhijie Lai, Yanan Yu, Yi Wang, Wenjing Wang, Binhe Wu, Wenkai Ma, Jong‐Jin Pak, Zhouhua Jiang (2026). Correction: A Systematic Study on Nitrogen Solubility in Liquid Nickel: Extending Sieverts’ Law Validation Over Wide Temperature-Pressure Ranges. Metallurgical and Materials Transactions B.DOI
43. Hongbin Lu, Hongchun Zhu, Zhouhua Jiang, Hui Li, Ce Yang, Z Wang, Teng Li, Yang Li (2026). High‐Precision Prediction Model for Electric Arc Furnace Steel Endpoint Temperature Using Interpretable Machine Learning With In‐Depth Analysis of Driving Factors. steel research international.DOI
44. Rui Yang, Y. Li, Meng Sun, Shuai Ma, Yunqie Mao, Yanshuo Ma, Dengyunfei Nie, H Wang, Zhenxing Mi, Yucheng Zhang, Zhouhua Jiang (2026). Evolution Behavior of Inclusions During the Reoxidation of Titanium Microalloyed Steel. steel research international.DOI
45. Ao Wang, Xi Chen, Yuan Li, Zhouhua Jiang, Zonghao Zhang (2026). Rapid Temperature Field Reconstruction for Electroslag Remelting Using Physics-Informed Neural Networks. Metallurgical and Materials Transactions B.DOI
46. Xuwei Chen, Zhouhua Jiang, Ao Wang, Shengcheng An (2026). Physics-constrained deep learning for predicting electrical conductivity of CaF₂-based multicomponent melts: A composition–microstructure–property paradigm. Materials Today Communications.DOI
47. Ji Ren, Jialong Tian, Zhouhua Jiang, Lichao Wang, Chenggang Jiang (2026). Synergistic optimization of cleanliness and grain size via Mg–Ce treatment for enhanced mechanical properties in H13 steel. Frontiers in Materials.DOI
48. Peng Li, Dongping ZHAN, Bingqian Huang, Sheng Chang, Zhouhua Jiang, Huishu Zhang (2026). Dual-Stream Network for Coupled Lime–Limestone Prediction in Converter Steelmaking: Simultaneous Optimization of Temperature Control and Slag Basicity. Journal of Sustainable Metallurgy.DOI
49. Yong Wang, Yanwu Dong, Zhouhua Jiang, L.B. Medovar, Ganna Stovpchenko (2026). Hot Deformation Behavior and Processing Map of 25Cr2Ni2MoV Steel. Metals.DOI
50. Conglin Yao, Haoyu Zhou, Hongchun Zhu, Yefeng Wang, Changyong Chen, Pengbo Wang, Zhouhua Jiang (2026). Simulation study of molten pool flow characteristics during electric arc furnace (EAF) steelmaking. High Temperature Materials and Processes.DOI
51. 荆雪，辛光瀚，耿鑫，姜周华（2025）. 渐进式固溶处理对316H不锈钢组织及性能的影响. 《特殊钢》.DOI
52. 刘玉潇，董艳伍，姜周华，陈玺（2025）. 基于MI和XGBoost算法电渣重熔终点磷含量预报模型. 《特殊钢》.DOI
53. 张彬彬，张树才，周杰，孙文昌，李花兵，姜周华（2025）. 氮对S32707钢在模拟深海环境中应力腐蚀行为的影响. 《沈阳工业大学学报》.
54. 禹江涛，张树才，周杰，李花兵，姜周华（2025）. 硼和铈复合处理对S32654不锈钢凝固和析出的影响. 《特殊钢》.DOI
55. 唐鑫，刘海洋，郑立春，姜周华（2025）. 稀土处理对双相不锈钢耐蚀性影响的研究. 《第十五届中国钢铁年会论文集—17.耐蚀钢》.
56. 李易明，姜周华，田家龙（2025）. 熔渣关键物理化学性质的智能预测. 《第十五届中国钢铁年会论文集—26.冶金人工智能》.
57. 彭程，杨策，姜周华（2025）. 低品位金属化球团熔分的热力学行为. 《材料与冶金学报》.DOI
58. 于凯，王忠昊，朱红春，姜周华（2025）. 渣层厚度对熔融热解炉底吹过程熔池流动性的影响. 《材料与冶金学报》.DOI
59. 宋宇，刘福斌，姜周华，耿鑫，李花兵（2025）. 电流强度与电极浸入深度对电渣重熔过程多物理场耦合行为及熔速的影响. 《材料与冶金学报》.DOI
60. 杨睿，李阳，孙萌，马帅，毛昀惬，姜周华（2025）. 钛微合金钢冶炼过程中TiN生成与控制的研究进展. 《特殊钢》.DOI
61. 姜周华，武泽文，陈兆平，游志敏，朱红春（2025）. 电弧炉短流程生产低氮钢的技术进展. 《材料与冶金学报》.DOI
62. 陈凯，谭庆丰，唐鑫，郑立春，姜周华（2025）. 精炼渣中CaF2含量和二元碱度对超级双相不锈钢洁净度的影响. 《材料与冶金学报》.DOI
63. 王禹程，李阳，孙萌，毛昀惬，李天赐，姜周华（2025）. 稀土Ce对F38MnVS非调质钢组织及CCT曲线的影响. 《材料热处理学报》.
64. 米振兴，李阳，姜周华，马帅，毛昀惬，李天赐，杨睿（2025）. 不同耐材对Ca处理铝脱氧钢中夹杂物的影响. 《第十五届中国钢铁年会论文集—4.炼钢》.
65. 汪昊，李阳，姜周华，马帅，杨睿，马彦硕，聂邓云飞（2025）. 钛铈协同处理对20CrMnTi齿轮钢中夹杂物的影响. 《第十五届中国钢铁年会论文集—15.特殊钢》.
66. 辛光瀚，耿鑫，马雪阳，姜周华，刘福斌（2025）. 核级316H不锈钢残余δ铁素体含量控制研究. 《第十五届中国钢铁年会论文集—15.特殊钢》.
67. 杜书扬，董艳伍，姜周华，MEDOVAR Lev，STOVPCHENKO Ganna（2025）. 揭示625 Plus合金均匀化过程中的元素扩散规律及其热变形特征（英文）. Journal of Central South University.
68. 陆泓彬，朱红春，姜周华（2025）. 基于冶金机理主导和数据驱动修正的电弧炉终点温度预测混合建模研究. 《第十五届中国钢铁年会论文集—26.冶金人工智能》.DOI
69. 董君伟，姜周华，李万明，田家龙，李健，张开翼（2025）. 新型铝挤压模具钢早期开裂的失效分析. 《第十五届中国钢铁年会论文集—6.废钢铁与电冶金技术》.DOI
70. 江腾，李星，刘汉强，崔珊，刘宏亮，刘军，栾义坤，姜周华（2025）. 等温淬火温度对贝/马复相42CrMo钢组织和力学性能的影响. 《材料研究学报》.
71. 徐光，齐江华，李阳，姜周华（2025）. 镁在钢中溶解度的计算与试验测定. 《炼钢》.
72. 田家龙，姜周华，李实（2025）. 热处理工艺对热锻模具钢QHZ的组织和性能影响的研究. 《锻造与冲压》.
73. 姜周华，董世建，赵诗琪，刘玉潇，陆泓彬，陈玺，姜骁箐，董艳伍（2025）. 特钢全产业链数字智慧大脑构想与关键技术. 《第十五届中国钢铁年会论文集—26.冶金人工智能》.
74. Yucheng Wang, Yang Li, Zhou-Hua Jiang, Meng Sun, Shuai Ma, Yun-qie Mao, Yan-Shuo Ma, Tian-Ci Li, Dengyunfei Nie, Rui Yang (2025). Effect of Zr on inclusions and microstructure of non-quenched and tempered steel F38MnVS. Journal of Materials Research and Technology.DOI
75. Hao Yang, Haojia Chen, Yang Li, Zhou-Hua Jiang, Lingfeng Xia, Wenyu Li, Dafang Zhang, Yahang Wang (2025). High Temperature Precipitation Behavior of Ce-Nb in Steel and Its Effect on Microstructure After Hot Deformation. Metallurgical and Materials Transactions B.DOI
76. Li-Chun Zheng, Xin Tang, Yan Li, Shijian Dong, M. Guo, Zhou-Hua Jiang (2025). Refinement of Liquid CaO–Al2O3 Inclusions in Duplex Stainless Steel through Ce Treatment. Steel Research International.DOI
77. Chang-Yong Chen, Zhou-Hua Jiang, Yang Li, Wei Gong (2025). Inclusions, Microstructure and Carbides of D2 Cold work die steel prepared under high pressure. Social Science Research Network.DOI
78. Yun-qie Mao, Yang Li, Meng Sun, Shuai Ma, Yan-Shuo Ma, Dengyunfei Nie, Rui Yang, Zhen-Li Mi, Hao Wang, Zhou-Hua Jiang (2025). Influence Mechanism of Ti Content on Microstructure and Mechanical Properties in Seismic-Resistant Rebar HRB600E. Metallurgical and Materials Transactions B.DOI
79. Chengyi Wang, Wei Wu, Zhou-Hua Jiang, Li-Bin Yang, Lu Lin, Jia-qing Zeng (2025). Research on improving manganese ore yield in converter based on the less-slag smelting process. Metallurgical Research & Technology.DOI
80. Tao Pan, Hongchun Zhu, Zhou-Hua Jiang, Hua-Bing Li, Zhi-Yu He, Zhuo Ni, FuBin Liu, Hao Feng, Shu-Cai Zhang (2025). Numerical Simulation of the Influence Mechanism of Melt Rate Variation on the Macrosegregation of 8Cr4Mo4V-Bearing Steel During Vacuum Arc Remelting. Metals.DOI
81. Shu-Cai Zhang, Yifeng Geng, Hua-Bing Li, Ximin Zang, Shengcheng An, Zhou-Hua Jiang, Hao Feng, Hongchun Zhu, Peng-Chong Lu (2025). Selection of a better strip for feeding into high-alloy stainless steel 654SMO: A promising technology to improve solidification structure. Journal of Materials Processing Technology.DOI
82. Jing Dai, Hao Feng, Hua-Bing Li, Xuzhi Cao, Hai-Jian Wang, Peng-Chong Lu, Hongchun Zhu, Shu-Cai Zhang, Zhou-Hua Jiang, Tao Zhang (2025). A novel method to inhibit stress corrosion cracking of corrosion-resistant Ni-base alloy by N addition. Journal of Materials Science & Technology.DOI
83. Shu-Cai Zhang, Jin-hui Ma, Nan Dong, Hua-Bing Li, Yi Zhang, Huan-Yu Tan, Jiang-tao Yu, Tong Wang, Zhou-Hua Jiang, Pei-De Han (2025). Unveiling the influential mechanism of nitrogen on the precipitation and dissolution of eutectic phases in cast boron-bearing super austenitic alloy S31254. Journal of Alloys and Compounds.DOI
84. Hongchun Zhu, Hanxun Luo, Hua-Bing Li, Zhi-Yu He, Zhuo Ni, Zhengrong Ai, Zhou-Hua Jiang, Hao Feng, Shu-Cai Zhang (2025). Cerium's role in transformation of inclusions and precipitated phases in Ferrium M54 steel ingots. Journal of Rare Earths.DOI
85. Shu-Cai Zhang, Jiang-tao Yu, Yifeng Geng, Hua-Bing Li, Bin-Bin Zhang, Ximin Zang, Zhou-Hua Jiang, Hao Feng, Hongchun Zhu (2025). A strategy for integrally improving the solidification and hot-working qualities of S32654 stainless steel: Feeding Ce-bearing steel strip. Journal of Materials Science & Technology.DOI
86. Hongbin Lu, Hongchun Zhu, Zhou-Hua Jiang, Hua-Bing Li, Ce Yang (2025). A Novel Hybrid Framework for Precise Electric Energy Consumption Prediction in Steel Production via Electric Arc Furnace: Coupling Mechanistic Models with Advanced Data-Driven Algorithms. Metallurgical and Materials Transactions B.DOI
87. Jing Dai, Hao Feng, Hua-Bing Li, Xuzhi Cao, Peng-Chong Lu, Hongchun Zhu, Shu-Cai Zhang, Kaiyi Zhang, Zhou-Hua Jiang, Tao Zhang (2025). Composition design of corrosion resistant Fe40Mn40Co10Cr10 HEA by “dissolution-diffusion-deposition” model. Journal of Alloys and Compounds.DOI
88. Yang Zhou, Hongchun Zhu, Hua-Bing Li, Zhuo Ni, Zhi-Yu He, Zhou-Hua Jiang, Hao Feng, Shu-Cai Zhang (2025). Elucidating the Mechanism of Refining the Columnar Dendrites Through Gas Cooling Pressure During the VAR Process. Metallurgical and Materials Transactions B.DOI
89. Hongbin Lu, Hongchun Zhu, Zhou-Hua Jiang, Hua-Bing Li, Ce Yang, Zhong-hao Wang, Teng Li, Hao Feng, Shu-Cai Zhang (2025). Integrating Metallurgical Mechanisms and Explainable Deep Learning Methods to Predict Phosphorus Content in Electric Arc Furnace Steelmaking for Enhanced Efficiency. ISIJ International.DOI
90. Hao Feng, Jing Dai, Huabing Li, Zhouhua Jiang, Tao Zhang (2025). Visualizing and quantifying the influence of N-Mo synergy on corrosion resistance of stainless steel by dissolution-diffusion-deposition model. 《第22届世界腐蚀大会摘要集（下）》.DOI
91. Zhuo‐Wen Ni, Hong‐Chun Zhu, Huabing Li, Zhi- Yu He, Zhou-hua JIANG, Bao-Quan Feng, Sun Zheng-xin, Hao Feng, Shu-Cai Zhang, Peng‐Chong Lu (2025). A universal model of dendrite growth restriction factor for multicomponent alloys: Application to high nitrogen stainless steels. Journal of Material Science and Technology.DOI
92. Jihang Li, Jialong Tian, Dongping Zhan, Zhouhua Jiang, Rustam O. Kaibyshev (2025). Achieving strength-ductility synergy by tuning the configuration of nanoprecipitates in high Co-Ni secondary hardening steel. Materials Science and Engineering A.DOI
93. Xi Chen, Yanwu Dong, Zhouhua Jiang, Ao Wang, Yuxiao Liu (2025). Mechanism-Guided Transfer Learning: Mechanism-Guided Residual Networks for Surface Tension Prediction in Electroslag Remelting CaF2-Based Slag. JOM.DOI
94. Peng Li, Dongping Zhan, Xudong Dou, Zhouhua Jiang, Huishu Zhang (2025). IMCT-Based Stacked Model for Predicting Phosphorus Distribution Ratio in Converter Steelmaking. Metallurgical and Materials Transactions B.DOI
95. Ji Ren, Jialong Tian, Zhouhua Jiang, Lele Wang, Chenggang Jiang (2025). Enhancing Cleanliness and Refining Primary Carbides in H13 Hot‐Work Die Steel through Mg–La Treatment. steel research international.DOI
96. Zhuo‐Wen Ni, Hong‐Chun Zhu, Huabing Li, Cheng-Ye Xing, Ding-Xu Hou, Zhiyu He, Zhouhua Jiang, Zheng-Xin Sun, Hao Feng, Shucai Zhang (2025). Enhancing the Degassing Efficiency of Molten Steel in Vacuum Casting via Vacuum Control. Metallurgical and Materials Transactions B.DOI
97. Jialong Tian, Roman Mishnev, Yuliya Tkacheva, Kaiming Wu, Rustam O. Kaibyshev, Zhouhua Jiang (2025). Plastic yielding and work hardening behavior in Q&P steel with multiphase structure. Journal of Materials Research and Technology.DOI
98. Hao-Jia Chen, Ling Xia, Yang Li, Hao Chun Yang, Wenyu Li, Ya-Hang Wang, Da-Fang Zhang, Zhouhua Jiang (2025). Influence Mechanism of Ce2O3 Refining Slag on Inclusions in 65Si2CrV Valve Spring Steel. Metallurgical and Materials Transactions B.DOI
99. Meng Sun, Yang Li, Zhouhua Jiang, Shuai Ma, Yongshuai Ji, Yunqie Mao, Changyong Chen, Yucheng Wang, Rui Xiang Yang (2025). Publisher Correction to: Inclusion characteristics and acicular ferrite formation in 1.8%Ni low carbon Al-killed steel with MgO nanoparticles addition. Journal of Iron and Steel Research International.DOI
100. Jialong Tian, Jihang Li, Zhijie Lai, Zhouhua Jiang (2025). Improving the Impact Toughness of FASTCOOL50 Die Steel by Increasing High‐Angle Grain Boundaries Density. steel research international.DOI
101. Hong‐Chun Zhu, Zhuo‐Wen Ni, Zhouhua Jiang, Teng Li, Huabing Li, Zhiyu He, Jun-Hao Yuan, Bin Li, Ce Yang, Hongbin Lu (2025). Numerical investigation on the application of hydrogen plasma arc in electric arc furnace. Applied Thermal Engineering.DOI
102. Shuyang Du, Yanwu Dong, Zhouhua Jiang, L.B. Medovar, Ganna Stovpchenko (2025). Effect of solution treatment temperature on the microstructure evolution and mechanical properties of Alloy 625 Plus. Materials Science and Engineering A.DOI
103. Hong‐Chun Zhu, Ce Yang, Zhouhua Jiang, Huabing Li, Hongbin Lu, Zhonghao Wang, Teng Li, Zhuo‐Wen Ni, Zhiyu He, Hao Feng, Shucai Zhang (2025). Melting behavior of isolated metallized pellet in slag–iron bath. Journal of Iron and Steel Research International.DOI
104. Hongbin Lu, Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Ce Yang (2025). High-Precision Prediction of Oxygen and Carbon Powder Consumption in Electric Arc Furnace Steelmaking: A Whale Optimization Algorithm-Enhanced Multi-Output Hybrid Stacking Approach. Metallurgical and Materials Transactions B.DOI
105. Shuyang Du, Yanwu Dong, Zhouhua Jiang, Yukuan Fan, Yong Wang, Fei Peng (2025). Effect of niobium content on microstructural evolution and mechanical behavior of Alloy 625 Plus. Journal of Alloys and Compounds.DOI
106. Jing-Bao Gao, Hong‐Chun Zhu, Huabing Li, Zhuo‐Wen Ni, Zhiyu He, Zhouhua Jiang, Shucai Zhang, Hao Feng, Lang Shui (2025). Thermodynamic and Kinetic Investigation into the Effects of TiO2 and CaO/Al2O3 in Refining Slag on Al-Ti Contents of GH4141 Superalloy. Metallurgical and Materials Transactions B.DOI
107. Yi-Ming Li, Shan Cui, Ao Wang, Jialong Tian, Zhouhua Jiang (2025). Innovative Models for Calculating Electrical Conductivity and Viscosity of Slag at 1600 °C: A Case Study on CaF2–Al2O–CaO–MgO–SiO2 Slag System. Metallurgical and Materials Transactions B.DOI
108. Ya-bo Wang, Hao Feng, Huabing Li, Zhouhua Jiang, Xiaodong Wang (2025). Effect of Ni addition on microstructure and mechanical properties of high nitrogen martensitic stainless bearing steel. Journal of Iron and Steel Research International.DOI
109. Rui Zhang, Hong‐Chun Zhu, Huabing Li, Zhouhua Jiang, Zhiyu He, Zhuo‐Wen Ni, Shucai Zhang, Hao Feng (2025). Distribution Evolution of Inclusions During Continuous Casting with Feeding Strip Oscillatingly and Bilaterally: A Comparative Study. Metallurgical and Materials Transactions B.DOI
110. Wenyu Li, Haojia Chen, Yang Li, Zhouhua Jiang, Hao Yang, Ling Xia, Yahang Wang, Dafang Zhang (2025). Effect of Refractory Composition on Nonmetallic Inclusion Characteristics in Valve Spring Steel. steel research international.DOI
111. Ji Ren, Jialong Tian, Zhouhua Jiang, Lele Wang, Chenggang Jiang (2025). Effect of Mg–Ce Treatment on Cleanliness and Primary Carbides of H13 Hot Work Die Steel. Metallurgical and Materials Transactions B.DOI
112. Haojia Chen, Y. Li, Hao Chun Yang, Ling Xia, Wenyu Li, Dafang Zhang, Yahang Wang, Zhouhua Jiang (2025). Research Status of Occurrence Behavior and Application of Ce in Steel. steel research international.DOI
113. Yu Zhang, Wentao Li, Fubin Liu, Haibao Zhang, Zhouhua Jiang, Xin Geng (2025). In situ observation of solidification behavior of Inconel 625 alloy: Coupled mechanism of nucleation and diffusion under magnesium microalloying. Journal of Alloys and Compounds.DOI
114. Hong‐Chun Zhu, Xinbo Yan, Huabing Li, Zhiyu He, Zhuo‐Wen Ni, Hao Feng, Shucai Zhang, Zhouhua Jiang, Pengchong Lu (2025). Deeply revealing the coupled formation mechanism of inclusions and precipitates in 654NMo ingot. Journal of Materials Research and Technology.DOI
115. Junwei Dong, Zhouhua Jiang, Jiaqi Fang, Wanming Li, Chaoyang Sun (2025). Study on the wettability behaviour between electroslag remelting slag and inclusions. Ironmaking & Steelmaking Processes Products and Applications.DOI
116. Hong‐Chun Zhu, Zhuo‐Wen Ni, Huabing Li, Zhiyu He, Wen-Bai Liu, Zhouhua Jiang, Hao Feng, Shucai Zhang (2025). A novel model for the removal and capture of inclusions in electroslag remelting process. International Journal of Thermal Sciences.DOI
117. Ling Xia, Hao Chun Yang, Yang Li, Zhouhua Jiang, Hao-Jia Chen, Wenyu Li, Pengfei Wang, Boyang Li, Da-Fang Zhang, Ya-Hang Wang (2025). Effect of K2O Content on the Viscosity and Melting Property of CaO-SiO2-Al2O3-MgO Based Refining Slag For Spring Steel. Metallurgical and Materials Transactions B.DOI
118. Pengfei Wang, Wei Gong, Zhouhua Jiang, Yu Zhang (2025). Effects of Cooling Rate on the Microstructure, Segregation, and Primary Carbides During Solidification of Mg-Containing GH3128 Superalloy. Metallurgical and Materials Transactions B.DOI
119. Lele Wang, Jialong Tian, Ji Ren, Chenggang Jiang, Zhouhua Jiang, Zhimin You (2025). Effect of Mg–Ce Treatment on the Inclusion Evolution of Al Pre-deoxidized M50 Aerospace Bearing Steel During Vacuum Induction Melting Process. Metallurgical and Materials Transactions B.DOI
120. Shuyang Du, Yanwu Dong, Zhouhua Jiang, L.B. Medovar, Ganna Stovpchenko (2025). Effects of Nb content on the solidification characteristics and hot deformation behavior of Alloy 625 Plus. International Journal of Minerals Metallurgy and Materials.DOI
121. Wenyu Zan, Beiyue Ma, Jianhuai Tang, Kun Liu, Yutong Cao, Jialong Tian, Zhouhua Jiang (2025). Corrigendum to ‘Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3’ [Ceram. Int. 49 (2023) 15164–15175]. Ceramics International.DOI
122. Wenyu Zan, Beiyue Ma, Yutong Cao, Jialong Tian, Zhangyan Zhou, Lulu Wang, Zhouhua Jiang (2025). Corrigendum to “Preparation and performance optimization of MgAl2O4 spinel materials by single-step reaction sintering” [Ceram. Int. 49 (2023) 23567-23578]. Ceramics International.DOI
123. Anguo Wang, Junhuai Zhang, Zhenghong Gao, Chunwen Su, Yulong Xiong, Zhouhua Jiang, Yu Ji Tian, Rui Chen, Yanchun Lou, Youyu Bao (2025). Research on the Microstructure and Morphology of Electroslag Special-Shaped Casting Based on Numerical Simulation. International Journal of Metalcasting.DOI
124. Yuming Zou, Haokun Zhu, Qihan Gao, Kaichao Xie, Jialin Chen, Hua Ding, Zhengyou Tang, Zhouhua Jiang (2025). Effects of mechanical and chemical heterogeneity on the strength-ductility synergy of a heterostructured medium Mn steel. Journal of Materials Research and Technology.DOI
125. Hong‐Chun Zhu, Rui Zhang, Huabing Li, Yujie Zheng, Zhouhua Jiang, Zhuo‐Wen Ni, Zhiyu He, Hao Feng, Shucai Zhang (2025). Cracking tendency induced by precipitated phases in S32654 continuous casting slab. Journal of Iron and Steel Research International.DOI
126. Yi-ming Li, Jialong Tian, Zhouhua Jiang (2025). Calculation of Calcium Ion Activity in the CaF2–Al2O3–CaO–SiO2–MgO Slag System and Its Impact on Calcium Content in Steel. Metallurgical and Materials Transactions B.DOI
127. Xi Chen, Yanwu Dong, Zhouhua Jiang, Yuxiao Liu (2025). Predicting the Viscosity of CaF2-Based Slag and Reverse Design of Electroslag Systems Using Explainable Machine Learning. Metallurgical and Materials Transactions B.DOI
128. Yuxiao Liu, Yanwu Dong, Zhouhua Jiang, Xi Chen (2025). Interpretable Prediction Model Based on GANs–DBN Data Enhancement Strategy for Electroslag Remelting Inclusions. Metallurgical and Materials Transactions B.DOI
129. Guang‐Han Xin, Xin Geng, Zhouhua Jiang (2025). The Transformation of Residual δ Ferrite in Nuclear‐Grade 316H Stainless Steel under Aging and Its Influence on Properties. steel research international.DOI
130. Yushuo Li, Yanwu Dong, Zhouhua Jiang, Hongxu Kuang, Fengxiang Zhang, Liang Li, He Xu (2025). Challenges and underlying causes associated with the hot deformation of as-cast GH4975 superalloy. Journal of Materials Research and Technology.DOI
131. Rui Xiang Yang, Yang Li, Meng Sun, Shuai Ma, Yunqie Mao, Yanshuo Ma, Tianci Li, Yucheng Wang, Dengyunfei Nie, Zhouhua Jiang (2025). Basic research on the effect of nitrogen content on nitride formation and grain size in titanium microalloyed low carbon steel. Journal of Materials Research and Technology.DOI
132. Hong‐Chun Zhu, Zhuo‐Wen Ni, Huabing Li, Zhiyu He, Zhengrong Ai, Zhouhua Jiang, Hao Feng, Shucai Zhang (2025). Unveiling the mechanisms behind the inconsistent impact of casting pressure on macro and microsegregation. Journal of Materials Processing Technology.DOI
133. Peng‐Chong Lu, Hao Feng, Huabing Li, Ming-Hong Ling, Haijian Wang, Hong‐Chun Zhu, Shucai Zhang, Zhuo‐Wen Ni, Zhongqiu Liu, Zhouhua Jiang (2025). A strategy to overcome the negative effect of Mg treatment on localized corrosion and enhance the performance of high-nitrogen martensitic stainless steel by Mg&Ce composite treatment. Corrosion Science.DOI
134. Jing‐Bao Gao, Hong‐Chun Zhu, Huabing Li, Zhuo‐Wen Ni, Zhiyu He, Zhouhua Jiang, Shucai Zhang, Hao Feng (2025). Formation Mechanism and Prevention of White Spots in Superalloys during Vacuum Arc Remelting: A Review. steel research international.DOI
135. Xi Chen, Yanwu Dong, Zhouhua Jiang, Yuxiao Liu, Xiwen Na (2025). Enhancement of the Electrical Conductivity Calculation Model for CaO-Based Slag Systems Through Machine Learning Assistance. JOM.DOI
136. Yunqie Mao, Yang Li, Zhouhua Jiang, Meng Sun, Shuai Ma, Yanshuo Ma, Yucheng Wang, Tianci Li, Dengyunfei Nie, Rui Xiang Yang, Changyong Chen (2025). Effect of Ti Content on the Evolution of Nonmetallic Inclusions and Grain Size in Seismic Rebar HRB400E. steel research international.DOI
137. Junwei Dong, Diyue Li, Jialong Tian, Zhouhua Jiang (2025). Atomic Ionic-scale Mechanism on Inclusion Modification by Calcium Treatment in the Electroslag Remelting Process Based on Ion and Molecule Coexistence Theory and Molecular Dynamics Simulation. ISIJ International.DOI
138. Yi-ming Li, Jialong Tian, Zhouhua Jiang (2025). An advanced approach to directly calculate eutectic points in quaternary and higher-order slags: A case study on CaF2–Al2O3–CaO–MgO–SiO2 slag systems. Journal of Materials Research and Technology.DOI
139. Shuai Ma, Yang Li, Zhouhua Jiang, Meng Sun, Yunqie Mao, Yanshuo Ma, Yucheng Wang, Tianci Li, Yunfei Niedeng, Rui Xiang Yang, Hang Liu (2025). Effect of yttrium addition timing on inclusion evolution and grain growth behavior in spring steel 55SiCr. Journal of Materials Research and Technology.DOI
140. Anguo Wang, Zhenghong Gao, Lu Zhang, Changjie Feng, Yun-Peng Yang, Yanchun Lou, Liting Zhao, Rui Chen, Zhouhua Jiang (2025). Review on Technology Progress of Electroslag Casting Products. International Journal of Metalcasting.DOI
141. 郑立春，李艳，陈凯，唐鑫，李花兵，姜周华（2024）. AlN析出相对超级双相不锈钢力学和耐蚀性能的影响. 《2024年（第四届）中国不锈钢科技发展论坛》.DOI
142. 邹涛，董艳伍，姜周华，王琪，王永，彭飞（2024）. Ti-Mo-V复合添加对船用10Ni5CrMoV钢组织和性能的影响（英文）. Journal of Central South University.
143. 张树才，孔晖闵，班腾，李花兵，姜周华，张伟，周杰，李国平（2024）. 利用铌铠甲包裹夹杂物提升双相不锈钢耐蚀性的策略. 《2024年（第四届）中国不锈钢科技发展论坛》.
144. 李阳，陈常勇，方勇，马帅，张咪娜，姜周华（2024）. Cu对含Sn铁素体不锈钢的力学及耐腐蚀性能的影响. 《特殊钢》.
145. 任吉，燕云，田家龙，王礼超，蒋成钢，王琳，姜周华（2024）. La处理对H13热作模具钢中夹杂物的影响. 《特殊钢》.
146. 耿鑫，姜周华，葛春钰，辛光瀚（2024）. 渣系组元对电渣重熔核级316H不锈钢中氢含量的影响. 《特殊钢》.
147. 周杨，朱红春，李花兵，姜周华，何志禹，倪卓文（2024）. 基于相场法模拟VAR强迫流场中柱状晶生长. 《特殊钢》.
148. 刘福斌，姜周华，李花兵，冯浩，董君伟，张取一，郑淮北（2024）. 加压电渣重熔装备与工艺技术开发. 《特殊钢》.
149. 关海龙，岳建博，田家龙，龚伟，姜周华（2024）. 镍对新型热作模具钢连续冷却转变规律与冲击功的影响. 《特殊钢》.
150. 赵佳伟，田家龙，杨平，战东平，姜周华（2024）. 双时效工艺对复合析出强化型超高强度钢的组织与性能的影响. 《特殊钢》.
151. 倪卓文，朱红春，李花兵，姜周华，孙正鑫，何志禹（2024）. H13模具钢电渣锭中夹杂物的类型以及分布规律分析. 《特殊钢》.
152. 杨朔，龚伟，王鹏飞，姜周华（2024）. Ce对2101双相不锈钢析出相和耐蚀性能的影响. 《稀土》.
153. 李阳，陈常勇，汪秀秀，杨皓，马帅，姜周华（2024）. 稀土元素对超级铁素体不锈钢组织及性能的影响. 《金属加工(热加工)》.
154. 汪润哲，龚伟，王鹏飞，姜周华，张万发，杜琳霄，赵恒波，金宇（2024）. EAF—LF—VD—CC流程生产GCr15轴承钢的洁净度及夹杂物演变. 《材料与冶金学报》.
155. 匡泓旭，董艳伍，姜周华，李毓硕（2024）. 铸态GH4975合金中偏析元素扩散及析出相回溶动力学特性. 《大型铸锻件》.
156. 董君伟，李吉航，田家龙，姜周华（2024）. 钙含量对H11模具钢冲击功的影响机理. 《钢铁》.
157. 姜周华，杨策，朱红春，陆泓彬（2024）. 氢冶金炼钢技术的研究现状与展望. 《钢铁》.
158. 姜周华，董艳伍，刘福斌，耿鑫（2024）. 我国特种冶金产品、技术和装备的最新进展与展望. 《特殊钢》.
159. 任春节，冷永磊，尹修刚，任立坤，邢伟，张英男，刘福斌，姜周华（2024）. ?800 mm大断面连铸圆坯凝固传热和凝固组织模拟. 《连铸》.
160. 陆泓彬，朱红春，姜周华，李花兵，杨策（2024）. 基于e-FCNN的电弧炉终点温度预报. 《钢铁》.
161. 丁世能，刘福斌，张海宝，姜周华，耿鑫（2024）. 真空电弧重熔GH984G合金多物理场耦合行为的数值模拟. 《材料与冶金学报》.DOI
162. 马彦硕，李阳，姜周华，孙萌，李天赐，马帅，刘航（2024）. Ce对曲轴钢49MnVS3中硫化物形态的影响. 《中国冶金》.
163. 刘浩杰，董艳伍，姜周华，潘嘉伟，张阳（2024）. 电渣重熔对K4002合金易氧化元素影响. 《中国冶金》.
164. 陆泓彬，朱红春，姜周华，杨策（2024）. 电弧炉智能炼钢的研究进展. 《中国冶金》.
165. Yang Li, Chang-Yong Chen, Pengfei Du, Hao Yang, Shuai Ma, Meng Sun, Mi-Na Zhang, Zhou-Hua Jiang (2024). Effect of rare earth Ce treatment on the microstructure and properties of 430 ferritic stainless steel bearing Sn and Cu. Ironmaking & Steelmaking: Processes, Products and Applications.DOI
166. Zhimin You, Junjie Shen, Yuxing Liu, In‐Ho Jung, Zewen Wu, Zhou-Hua Jiang (2024). Coupled Experimental Study and Thermodynamic Modeling of the Fe–Si–N System. Steel Research International.DOI
167. Shuai Ma, Yang Li, Zhou-Hua Jiang, Meng Sun, Yun-qie Mao, Dengyunfei Nie, Boyang Li, Chang-Yong Chen (2024). Effect of Ferrosilicon Deoxidation on the Evolution and Removal of Oxide Inclusions in 55SiCr Spring Steel. Metallurgical and Materials Transactions B.DOI
168. Yucheng Wang, Yang Li, Zhou-Hua Jiang, Meng Sun, Yun-qie Mao, Tian-Ci Li (2024). Optimization of Inclusion and Microstructure of As‐Cast Nonquenched and Tempered Steel F38MnVS with Trace Ce. Steel Research International.DOI
169. Yang Li, Chang-Yong Chen, Cong Zhang, Shuai Ma, Hao Yang, Meng Sun, Hai-Bo Cao, Zhou-Hua Jiang (2024). Effect of calcium treatment on inclusions in 38CrMoAl high aluminum steel. High Temperature Materials and Processes.DOI
170. Hao Yang, Lingfeng Xia, Yang Li, Chang-Yong Chen, Zhou-Hua Jiang, Wenyu Li, Haojia Chen (2024). Study on precipitation behavior of Ce and Nb during solidification. Journal of Materials Research and Technology.DOI
171. Chang-Yong Chen, Shuai Ma, Meng Sun, Yi Wang, Hai-Bo Cao, Mi-Na Zhang, Yang Li, Zhou-Hua Jiang (2024). Influence of refractories on cleanliness in high-purity C96V saw wire steel. Canadian metallurgical quarterly.DOI
172. Meng Sun, Yang Li, Zhou-Hua Jiang, Shuai Ma, Yongshuai Ji, Yun-qie Mao, Chang-Yong Chen, Yucheng Wang, Rui Yang (2024). Inclusion characteristics and acicular ferrite formation in 1.8%Ni low carbon Al-killed steel with MgO nanoparticles addition. Journal of Iron and Steel Research International.DOI
173. Shuai Ma, Yang Li, Zhou-Hua Jiang, Meng Sun, Yunfei Niedeng, Rui Yang, Yucheng Wang, Tian-Ci Li, Chang-Yong Chen, Hang Liu (2024). Effect of Ce Addition on Inclusions and Primary Carbide Network in AISI 440C Bearing Steel. Steel Research International.DOI
174. Yang Li, Shen Sun, Hao Yang, Chang-Yong Chen, Shuai Ma, Yun-qie Mao, Meng Sun, Hai-Bo Cao, Zhou-Hua Jiang (2024). Effect of Ce and Nb on the Microstructure and Properties of 65Si2CrV Spring Steel for Automobile Valve. Journal of materials engineering and performance (Print).DOI
175. Chang-Yong Chen, Meng Sun, Mingze Ran, Mi-Na Zhang, Zi-Hui Dong, Yi Wang, Yang Li, Zhou-Hua Jiang (2024). Effect of Cs2O-containing refining slag on the purity of ultra-clean steel for ultra-fine saw wire. Ironmaking & Steelmaking: Processes, Products and Applications.DOI
176. Li-Chun Zheng, Zebin Ren, Kai Chen, Yan Li, Hiroshi Fukaya, Zhou-Hua Jiang (2024). The Effect of Ca Pretreatment on the Characteristics of Rare‐Earth Nonmetallic Inclusions in Super‐Duplex Stainless Steel. Steel Research International.DOI
177. Lichao Wang, Zhou-Hua Jiang, Chenggang Jiang, Ji Ren, Jia-Long Tian, Zhimin You (2024). Effect of Mg Treatment on the Evolution of Inclusions in M50 Aerospace Bearing Steel Under Different S/O Ratio Conditions. Steel Research International.DOI
178. Zhimin You, Zhijie Lai, Sen-Lin Cui, Zhou-Hua Jiang, In-Ho Jung (2024). Critical Evaluation and Thermodynamic Optimization of the Cr–P and Cr–Fe–P Systems. Metals.DOI
179. Hao Feng, Hai-Jian Wang, Hua-Bing Li, Hongchun Zhu, Shu-Cai Zhang, Zhou-Hua Jiang (2024). Parent austenite grain reconstruction in martensitic steel. Journal of Materials Science & Technology.DOI
180. Fang Cao, Hao Feng, Yi-Duo Huang, Hua-Bing Li, Xiao-Lan Wang, Gang Zhou, Shu-Cai Zhang, Hongchun Zhu, Hai-Jian Wang, Zhou-Hua Jiang (2024). Carbon-microalloying enhances strength-ductility synergy of (FeCoNi)90Al10 medium-entropy alloy via tailoring precipitation. Materials Science & Engineering: A.DOI
181. Shu-Cai Zhang, Jiang-tao Yu, Hua-Bing Li, Zhou-Hua Jiang, Junyu Ren, Hao Feng, Hongchun Zhu, Bin-Bin Zhang, Pei-De Han (2024). Unveiling the role of cerium in enhancing the hot ductility of super austenitic stainless steel S32654 at different temperatures. Journal of Materials Science & Technology.DOI
182. Jiang-tao Yu, Shu-Cai Zhang, Hua-Bing Li, Zhou-Hua Jiang, Hao Feng, Hongchun Zhu, Teng Ban, Ting-Yu Ren (2024). Influence Mechanism of Boron Addition on the Precipitation Behavior of Super Austenitic Stainless Steel S32654. Metals and Materials International.DOI
183. Hongchun Zhu, Hongbin Lu, Zhou-Hua Jiang, Hua-Bing Li, Ce Yang, Zhuo Ni, Hao Feng, Shu-Cai Zhang (2024). Enhanced prediction of end-point carbon content in electric arc furnaces using Bayesian optimised fully connected neural networks with early stopping. Ironmaking & Steelmaking: Processes, Products and Applications.DOI
184. Hao Feng, Minghui Wu, Hua-Bing Li, Lingfeng Xia, Peng-chong Lu, Shu-Cai Zhang, Hongchun Zhu, Zhou-Hua Jiang (2024). Elucidating the dual effect of vanadium microalloying on hot deformation behavior of high nitrogen martensitic stainless steel. Journal of Materials Research and Technology.DOI
185. Hai-Jian Wang, Hao Feng, Hua-Bing Li, Shu-Cai Zhang, Hongchun Zhu, Zhou-Hua Jiang (2024). Mn-controlled martensitic variant selection significantly affects the strength and toughness of 2.3 GPa ultra-high strength spring steel. Materials Science & Engineering: A.DOI
186. Yifeng Geng, Shu-Cai Zhang, Hua-Bing Li, Xi-Min Zang, Zhou-Hua Jiang, Hongchun Zhu, Hao Feng, Shengcheng An (2024). Mechanism of improving solidification structure of super austenitic stainless steel by feeding strip into molten steel. Journal of Materials Processing Technology.DOI
187. Shu-Cai Zhang, B. Lin, Hua-Bing Li, Zhou-Hua Jiang, Shengcheng An, Ting-Yu Ren, Jiang-tao Yu, Hao Feng, Hongchun Zhu (2024). An effective strategy for manufacturing ultra-high purity AISI 316L stainless steel by vacuum C deoxidization pretreatment plus Mg–Ca composite treatment. Journal of Materials Research and Technology.DOI
188. Hongbin Lu, Hongchun Zhu, Zhou-Hua Jiang, Hua-Bing Li, Ce Yang, Hao Feng, Shu-Cai Zhang (2024). A CatBoost‐Based Modeling Approach for Predicting End‐Point Carbon Content of Electric Arc Furnace. Steel Research International.DOI
189. Hao Feng, Minghui Wu, Kaiyi Zhang, Hua-Bing Li, Hongchun Zhu, Shu-Cai Zhang, Zhou-Hua Jiang (2024). Overcoming the strength-ductility trade-off in Fe40Mn40Co10Cr10 high-entropy alloy via nitrogen-doping and hetero-structure design. Journal of Alloys and Compounds.DOI
190. Hai-Jian Wang, Hao Feng, Hua-Bing Li, Shu-Cai Zhang, Hongchun Zhu, Wei-Chao Jiao, Zhou-Hua Jiang (2024). Thermal stability and softening mechanism of a new type of high nitrogen hot-work die steel 3Cr5Mo2SiVN. Materials Characterization.DOI
191. Zhi-Yu He, Hongchun Zhu, Hua-Bing Li, Yang Zhou, Zhuo Ni, Hao Feng, Shu-Cai Zhang, Zhou-Hua Jiang (2024). Revealing the Effects of Pressure on the SDAS and Columnar Dendrite Growth Rate in 30Cr15Mo1N Ingot by Phase Field Method. Metallurgical and Materials Transactions B.DOI
192. Hai-Jian Wang, Hao Feng, Hua-Bing Li, Shu-Cai Zhang, Hongchun Zhu, Zhou-Hua Jiang (2024). Effect of isothermal tempering time and temperature on microstructure and hardness of 3Cr5Mo2SiVN hot-work die steel. Materials Characterization.DOI
193. Tao Zou, Yanwu Dong, Zhouhua Jiang, Shuyang Du, Yushuo Li (2024). Effect of lamellarization on the microstructure and mechanical properties of marine 10Ni5CrMoV steel. International Journal of Minerals Metallurgy and Materials.DOI
194. Hong‐Chun Zhu, Yang Zhou, Huabing Li, Zhuo‐Wen Ni, Zhiyu He, Zhouhua Jiang, Hao Feng, Shucai Zhang (2024). Delving deep into the influence of melting rate on columnar dendrite growth during VAR by multi-scale simulation. International Journal of Thermal Sciences.DOI
195. Wenchao Zhang, Zhouhua Jiang, YongLei Leng, Fu-Bin Liu, X. Y. Yin, LiKun Ren, Wei Xing, YingNan Zhang (2024). Numerical Simulation of Solute Transport Behavior During the Grade Transition of Round Billet Continuous Casting. steel research international.DOI
196. Hong‐Chun Zhu, Tao Pan, Zhuo‐Wen Ni, Zhouhua Jiang, Huabing Li, Hongbin Lu, Ce Yang, Zhiyu He, Hao Feng, Shucai Zhang (2024). Numerical Investigation on Heat Transfer Efficiency from Gas to Scrap in Feeding System of 100 t Consteel Electric Arc Furnace. steel research international.DOI
197. Yabo Wang, Hao Feng, Huabing Li, Yumeng Zhang, Zhouhua Jiang, Xiaodong Wang (2024). Microstructure evolution and mechanical properties of martensitic stainless bearing steels with different carbon nitrogen ratios. Journal of Materials Research and Technology.DOI
198. Zhuo‐Wen Ni, Hong‐Chun Zhu, Huabing Li, Zhiyu He, Hao Feng, Shucai Zhang, Peng‐Chong Lu, Hai‐Jian Wang, Zhouhua Jiang (2024). Delving Deep into the Influence of Pressure on Columnar‐to‐Equiaxed Transition in High‐Nitrogen Steel Ingot by Thermodynamics and Kinetics. steel research international.DOI
199. Pengfei Wang, Wei Gong, Zhouhua Jiang, Yu Zhang, Di-Yue Li (2024). Effect of MgO Content and CaO/Al2O3 Ratio of CaF2–CaO–Al2O3–MgO Slag on the Oxidation Behavior of Mg in Mg-Containing GH3128 Alloy. Metallurgical and Materials Transactions B.DOI
200. Jihang Li, Jialong Tian, Dongping Zhan, Wei Wang, Zhouhua Jiang (2024). Designing a new ultra-high strength steel with multicomponent precipitates under material genetic design. Journal of Materials Research and Technology.DOI
201. Tao Zou, Yanwu Dong, Zhouhua Jiang, Jiawei Pan (2024). Study of Cryogenic Treatment on the Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel. Metals and Materials International.DOI
202. Haoyang Suo, Fu-Bin Liu, Congpeng Kang, Huabing Li, Zhouhua Jiang, Xin Geng (2024). Effects of Pressure on Nitrogen Content and Solidification Structure during Pressurized Electroslag Remelting Process with Composite Electrode. steel research international.DOI
203. Qi Wang, Yanwu Dong, Zhouhua Jiang, Zilin Yin, Yuning Wu, Haibiao Qing (2024). Enhancing the Pitting Corrosion Resistance of Fe‐36Ni Invar Alloy via Introducing Mg. steel research international.DOI
204. Xi Chen, Yanwu Dong, Zhouhua Jiang, Yuxiao Liu, Jia Wang (2024). Oxygen Content Control in the Electroslag Remelting Process: An Incremental Learning Strategy Based on Optimized Wasserstein Generative Adversarial Network with Gradient Penalty Data Augmentation. steel research international.DOI
205. Qi Wang, Yanwu Dong, Zhouhua Jiang, Zilin Yin, Yuning Wu, Haibiao Qing (2024). Unveiling the influence of zirconium on the corrosion behavior of Fe-36Ni Invar alloy. Intermetallics.DOI
206. Tao Zou, Yanwu Dong, Zhouhua Jiang, Qi Wang, Yong Wang, Fei Peng (2024). Effect of Ti-Mo-V composite addition on microstructure and mechanical properties of marine 10Ni5CrMoV steel. Journal of Central South University.DOI
207. Y.S. Liu, Yanwu Dong, Zhouhua Jiang, Xi Chen (2024). Hybrid Model Integrating Locally Linear Embedding and LightGBM for Predicting Sulfur Content in Electroslag Remelting. steel research international.DOI
208. Ling-Feng Xia, Hao Feng, Huabing Li, Shucai Zhang, Hong‐Chun Zhu, Zhouhua Jiang (2024). Manufacturing High Strength-Toughness High-Nitrogen Stainless Bearing Steel 30Cr15Mo1VN by Pressurized Duplex Process. Metallurgical and Materials Transactions B.DOI
209. Xu-Ze Li, Hao Feng, Huabing Li, Shou-Xing Yang, Shucai Zhang, Hong‐Chun Zhu, Jong‐Jin Pak, Zhouhua Jiang (2024). Deoxidation of Nickel-based Superalloy Using Carbon under High Vacuum Degree. Metallurgical and Materials Transactions B.DOI
210. Beiyue Ma, Wenyu Zan, Jianhuai Tang, Jialong Tian, Zhouhua Jiang, Chengji Deng, Guoqi Liu (2024). Preparation of MgO-MgAl2O4 refractories doped with La2O3 and the wetting permeation behavior by alkaline slag. Construction and Building Materials.DOI
211. Wen-hao Yan, Xin Geng, Zhouhua Jiang, Fubin Liu (2024). Research on the reaction mechanism and control of aluminium enhancement for electroslag remelting high-quality turbine blade steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
212. Kean Yao, Yanwu Dong, Zhouhua Jiang, Yong Wang, Yushuo Li, Shuyang Du, Yuning Wu, Haibiao Qing (2024). In Situ Observation of Inclusions Pinning Effect of Austenite Grain Growth in Fe−80Ni Permalloy With or Without Ce treatment. JOM.DOI
213. Tao Zou, Yanwu Dong, Zhouhua Jiang, Li‐Meng Liu (2024). Study on Strain Hardening and Cryogenic Toughness of Marine 10Ni5CrMoV Steel during Tempering. steel research international.DOI
214. Xi Chen, Yanwu Dong, Zhouhua Jiang, Jia Wang, Yuxiao Liu (2024). Prediction of titanium burn-off and untimate titanium content in electroslag process. Journal of Materials Research and Technology.DOI
215. Xu-Ze Li, Hao Feng, Huabing Li, Shucai Zhang, Hong‐Chun Zhu, Shou-Xing Yang, Jong‐Jin Pak, Zhouhua Jiang (2024). Thermodynamic Study on Nitrogen Solubility and TiN Formation in Molten Ni-Ti-N Alloys. Metallurgical and Materials Transactions B.DOI
216. Rui Zhang, Hong‐Chun Zhu, Huabing Li, Zhouhua Jiang, Tao Pan, Shucai Zhang, Hao Feng (2024). Evolution of Inclusion Distribution in Continuous Casting Slabs During Strip Feeding. Metallurgical and Materials Transactions B.DOI
217. Pengfei Wang, Wei Gong, Zhouhua Jiang, Xingtong Li, Yu Zhang (2024). Effect of MgO content and CaO/Al2O3 ratio on melting temperature and viscosity of CaF2–CaO–Al2O3–MgO slag for electroslag remelting. Ceramics International.DOI
218. Peng‐Chong Lu, Pengfei Zhang, Hao Feng, Huabing Li, Shucai Zhang, Hong‐Chun Zhu, Zhouhua Jiang (2024). Revealing the impact of inclusion types on pitting corrosion behavior of high-nitrogen stainless bearing steels with different Ce contents: Induction effect of oxides/sulfides and inhibition effect of nitrides. Corrosion Science.DOI
219. Peng‐Chong Lu, Hao Feng, Huabing Li, Peng-fei Zhang, Hong‐Chun Zhu, Zhuo‐Wen Ni, Shucai Zhang, Zhouhua Jiang (2024). Cleanliness Improvement and Microstructure Refinement of As-Cast High-Nitrogen Stainless Bearing Steel by Magnesium Treatment. Metallurgical and Materials Transactions B.DOI
220. Tao Zou, Yanwu Dong, Zhouhua Jiang, Zi‐lin Yin (2024). Study on Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel during Tempering. steel research international.DOI
221. Pengfei Wang, Wei Gong, Zhouhua Jiang, Yu Zhang, Xingtong Li, Di-Yue Li (2024). Physical and chemical properties of CaF 2 −CaO−Al 2 O 3 −MgO slag for electroslag remelting of Mg-containing GH3128 superalloy. Ironmaking & Steelmaking Processes Products and Applications.DOI
222. Hong‐Chun Zhu, Bin Li, Huabing Li, Zhuo‐Wen Ni, Zhiyu He, Hongbin Lu, Hao Feng, Shucai Zhang, Zhouhua Jiang (2024). Elucidating the Influence Mechanism of Vanadium Addition on Dendritic Structure and Precipitated Phase of 30Cr15Mo1N Ingot During Pressurized Solidification. JOM.DOI
223. Zhiyu He, Hong‐Chun Zhu, Huabing Li, Zhuo‐Wen Ni, Han‐Xun Luo, Hao Feng, Shucai Zhang, Zhouhua Jiang (2024). Carbon Macrosegregation Pattern in 30Cr15Mo1N Ingot: Impact of Pouring Rate. steel research international.DOI
224. Rui Zhang, Hong‐Chun Zhu, Huabing Li, Zhouhua Jiang, Zhuo‐Wen Ni, Zhiyu He, Hao Feng, Shucai Zhang (2024). A Novel Model to Predict Shape Variation of Steel Strip During Feeding in Slab Continuous Casting. steel research international.DOI
225. Yushuo Li, Yanwu Dong, Zhouhua Jiang, Shuyang Du, Kean Yao, Zhiwen Hou (2024). Hot Deformation Characteristics of GH4975 Nickel-Based Superalloy in the Coexistence Region of γ and γ′ Phases. JOM.DOI
226. Yuxiao Liu, Yanwu Dong, Zhouhua Jiang, Xi Chen (2024). Interpretable Predictive Model for Inclusions in Electroslag Remelting Based on XGBoost and SHAP Analysis. Metallurgical and Materials Transactions B.DOI
227. Yuxiao Liu, Yanwu Dong, Zhouhua Jiang, Qi Wang, Yu-shuo Li (2024). Application of XGBoost and kernel principal component analysis to forecast oxygen content in ESR. Journal of Iron and Steel Research International.DOI
228. Haijian Wang, Hao Feng, Huabing Li, Gang Zhou, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang (2024). Nitrogen-Substituting Carbon Significantly Improves Softening Resistance of H13 Hot-Work Die Steel. Metallurgical and Materials Transactions A.DOI
229. Zhiyu He, Hong‐Chun Zhu, Huabing Li, Zhuo‐Wen Ni, Han‐Xun Luo, Hao Feng, Shucai Zhang, Hongbin Lu, Zhouhua Jiang (2024). Evolution of Dendrite Structure and Shrinkage Porosity in 30Cr15Mo1N Ingot with Pouring Rate. steel research international.DOI
230. Zhuo‐Wen Ni, Hong‐Chun Zhu, Huabing Li, Bin Li, Zhiyu He, Hao Feng, Shucai Zhang, Peng‐Chong Lu, Zhouhua Jiang (2024). Inhibiting the shrinkage porosity in 30Cr15Mo1N ingots by vanadium-nitrogen synergy during pressurized solidification. Journal of Materials Processing Technology.DOI
231. Tao Pan, Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Fubin Liu, Rui Zhang, Zhiyu He, Zhuo‐Wen Ni (2024). Motion Behavior of Ce‐Containing Inclusions in 8Cr4Mo4V‐Bearing Steel during Vacuum Arc Remelting. steel research international.DOI
232. 郑立春，彭博，娄健，姜周华（2023）. 含铈镁H13模具钢电渣重熔渣系的研究. 《东北大学学报(自然科学版)》.
233. 彭雷朕，姜周华，沈国劬，耿鑫，邱国兴，王承（2023）. 电渣重熔9CrMoCoB钢过程电极表面氧化行为及脱氧制度. 《特殊钢》.
234. 姜周华，张树才，李花兵，朱红春，韩培德（2023）. 基于硼和稀土复合处理的超级奥氏体不锈钢凝固和热加工特性的实验室研究. 《2023年（第三届）中国不锈钢科技发展论坛论文集》.
235. 郑立春，娄健，李花兵，姜周华（2023）. 含硫模铸保护渣与超级双相不锈钢铸锭间的高温相互作用. 《2023年（第三届）中国不锈钢科技发展论坛论文集》.
236. 李作伟，耿鑫，姜周华，刘福斌（2023）. 电渣重熔304NG不锈钢脱氧热力学研究. 《中南大学学报(自然科学版)》.
237. 支卫军，姚赞，姜周华（2023）. 高碳镀锌钢丝的组织演变及对扭转性能的影响. 《东北大学学报(自然科学版)》.
238. 李扬，耿鑫，姜周华，陶学儒，彭雷朕（2023）. 临界区高温侧正火对COST-FB2钢组织与性能的影响. 《材料与冶金学报》.
239. 姚科安，董艳伍，姜周华，王永，孙经哲（2023）. 稀土铈添加对Fe-80Ni坡莫合金洁净度及磁性能的影响（英文）. Journal of Central South University.
240. 任泽斌，陈凯，李艳，唐鑫，郑立春，姜周华（2023）. 稀土镁处理顺序和钙预处理对钢中稀土夹杂物特征的影响. 《第十四届中国钢铁年会论文集—4.炼钢与连铸》.DOI
241. 杨守星，李花兵，冯浩，姜周华，陈敏（2023）. 加压电渣重熔高氮不锈钢洁净度控制研究. 《第十四届中国钢铁年会论文集—5.电冶金与废钢铁》.DOI
242. 陆泓彬，朱红春，姜周华，吴泽文，艾翔宇，杨策，冯浩，张树才（2023）. 基于随机森林的电弧炉终点参数预报研究. 《第十四届中国钢铁年会论文集—5.电冶金与废钢铁》.DOI
243. 任吉，田家龙，王礼超，蒋成钢，姜周华（2023）. Ce-Mg处理对H13钢洁净度、组织和性能的影响. 《第十四届中国钢铁年会论文集—5.电冶金与废钢铁》.DOI
244. 李万明，刘峻辰，臧喜民，姜周华（2023）. D2冷作模具钢中的碳化物形成机理及控制. 《第十四届中国钢铁年会论文集—5.电冶金与废钢铁》.DOI
245. 王礼超，田家龙，蒋成钢，任吉，姜周华（2023）. Ce-Mg协同处理对M50航空轴承钢中夹杂物演变的影响. 《第十四届中国钢铁年会论文集—5.电冶金与废钢铁》.DOI
246. 杨睿，李阳，姜周华，孙萌，马帅，马彦硕，李天赐（2023）. 含氮微合金钢中氮化物的生成行为研究. 《第十四届中国钢铁年会论文集—10.先进钢铁材料与应用》.DOI
247. 任春节，冷永磊，尹修刚，任立坤，邢伟，张英男，刘福斌，姜周华（2023）. Φ800mm大断面连铸圆坯42CrMo4凝固传热过程模拟. 《第十四届中国钢铁年会论文集—10.先进钢铁材料与应用》.DOI
248. 岳建博，田家龙，龚伟，廖俊，于洋，姜周华（2023）. 镍对Cr-Mo-V系热作模具钢淬透性及碳化物析出的影响. 《第十四届中国钢铁年会论文集—10.先进钢铁材料与应用》.DOI
249. 周荣傲，龚伟，王鹏飞，姜周华（2023）. 精炼渣组元对渣系物化性能和耐蚀合金中元素烧损的影响. 《炼钢》.
250. 李秋寒，龚伟，姜周华，王鹏飞（2023）. 微量镁对Incoloy825耐蚀合金力学性能的影响. 《过程工程学报》.
251. 陶学儒，耿鑫，姜周华，李扬，彭雷朕（2023）. B质量分数对620℃时效中FB2钢组织和力学性能的影响. 《中南大学学报(自然科学版)》.
252. 鸡永帅，李阳，姜周华，孙萌，马彦硕（2023）. 外加镁系氧化物粒子在钢铁材料制备中的进展. 《中国冶金》.
253. 查伟，董艳伍，姜周华，刘玉潇（2023）. 基于GBDT算法真空自耗铸锭终点锰含量预测模型. 《中国冶金》.
254. 张海宝，刘福斌，姜周华，李花兵，耿鑫（2023）. 镁对N06625合金铸态组织的影响. 《中国冶金》.
255. 杜鑫，龚伟，姜周华，黎涛（2023）. 转炉+AOD两步法冶炼不锈钢物热平衡模型开发. 《中国冶金》.
256. 马帅，李阳，姜周华，孙萌，毛昀惬，马彦硕（2023）. 回火工艺对含Ce轴承钢440C组织性能影响. 《中国冶金》.
257. 王举，李阳，姜周华，孙萌，毛昀惬，马帅（2023）. AISI 431不锈钢生产过程夹杂物转变机理. 《钢铁》.
258. 姜周华，董艳伍，耿鑫，刘福斌（2023）. 高品质特殊钢电渣重熔技术的开发和应用. 《钢铁》.
259. 李作伟，耿鑫，姜周华，刘福斌（2023）. SiO2对抽锭式电渣重熔渣系物性参数的影响. 《钢铁》.
260. Meng Sun, Zhou-Hua Jiang, Yang Li, Chang-Yong Chen, Yan-Shuo Ma, Shuai Ma, Tian-Ci Li, Hang Liu (2023). Degradation mechanism of MgO–MgAl2O4 dual-phase refractory in contact with the automobile gear steel SCr420H with Si–Mn, Al and Ce–Al deoxidation. Ceramics International.DOI
261. G. Stovpchenko, L. Medovar, D. Stepanenko, Zhou-Hua Jiang, Yan-Wu Dong, Yuxiao Liu (2023). ENERGY AND ENVIRONMENTAL SAVINGS BY AND FOR STEEL LIGHTWEIGHT. ISIJ International.DOI
262. Shu-Cai Zhang, Hao Feng, Hua-Bing Li, Zhou-Hua Jiang, Tao Zhang, Hongchun Zhu, Yue Lin, Wei Zhang, Guo-Ping Li (2023). Design for improving corrosion resistance of duplex stainless steels by wrapping inclusions with niobium armour. Nature Communications.DOI
263. Hao Feng, Chun-Tian Yang, Enze Zhou, Dake Xu, Hua-Bing Li, Zhou-Hua Jiang (2023). N-doping significantly enhances resistance of CrCoNi medium-entropy alloy towards microbiologically influenced corrosion and tribocorrosion in the presence of Shewanella algae. Corrosion Science.DOI
264. Li-Chun Zheng, J. Lou, Bai-Qiang Yan, H. Ren, Hua-Bing Li, Zhou-Hua Jiang (2023). Effect of Surfactant Tellurium on the Microstructure and Mechanical Properties of M42 High-Speed Steel. ISIJ International.DOI
265. Hongchun Zhu, Zhuo Ni, Hua-Bing Li, Zhi-Yu He, Yu Wang, Fen Hao, Zhou-Hua Jiang (2023). Function of solidification pressure on the rising and breakup of nitrogen bubbles in molten steel. ISIJ International.DOI
266. Zhouhua Jiang, Dong Yanwu, Xu Kuangdi (2023). Vacuum Metallurgy. The ECPH Encyclopedia of Mining and Metallurgy.DOI
267. Zhouhua Jiang, Dong Yanwu, Shiqi Li, Xu Kuangdi (2023). Electroslag Remelting with Protective Atmosphere. The ECPH Encyclopedia of Mining and Metallurgy.DOI
268. Peng‐Chong Lu, Hao Feng, Huabing Li, Pengfei Zhang, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang (2023). Cerium Addition Improves Cleanliness and Refines Microstructure of As‐Cast High‐Nitrogen Stainless Bearing Steel. steel research international.DOI
269. Yushuo Li, Yanwu Dong, Zhouhua Jiang, Shuyang Du, Kean Yao, Yong Wang, Xinwei Wang (2023). Optimizing the Hot Deformation Microstructure of GH4975 Superalloy by Sup-solvus Temperature Holding Followed by Extremely Slow Cooling. Metals and Materials International.DOI
270. Zhuo‐Wen Ni, Hong‐Chun Zhu, Huabing Li, Zhiyu He, Bin Li, Hao Feng, Shucai Zhang, Zhouhua Jiang (2023). Elucidating the promoting mechanism of nitrogen in the columnar-to-equiaxed transition of steel ingot. International Journal of Heat and Mass Transfer.DOI
271. Yao-xin Du, Yanwu Dong, Zhouhua Jiang, Ganna Stovpchenko, Yu-shuo Li, Jun Huang, Xinwei Wang, Yuxiao Liu (2023). Dissolution kinetics and reaction mechanism of Al2O3 in molten CaF2–CaO–Al2O3 slag. Journal of Iron and Steel Research International.DOI
272. Jing Jie Dai, Hao Feng, Huabing Li, Hong‐Chun Zhu, Shucai Zhang, Jin-Dong Qu, Tong He, Zhouhua Jiang, Tao Zhang (2023). Insights into the mechanism of Mo protecting CoCrFeNi HEA from pitting corrosion—A quantitative modelling study on passivation and repassivation processes. Journal of Material Science and Technology.DOI
273. Hong‐Chun Zhu, Zhuo‐Wen Ni, Huabing Li, Zhiyu He, Bin Li, Hao Feng, Zhouhua Jiang (2023). Revealing the Removal Mechanism of Vanadium Addition on Nitrogen Pores in 30Cr15Mo1N High‐Nitrogen Steel Ingot. steel research international.DOI
274. Wei Gong, Jianbo Yue, Jialong Tian, Jun Bi Liao, Yang Yu, Zhouhua Jiang (2023). The effect of nickel on the carbide precipitation behavior in Cr–Mo–V hot-working die steel. Journal of Materials Research and Technology.DOI
275. Jialong Tian, Gang Zhou, Wei Wang, Qing‐Miao Hu, Zhouhua Jiang, Ke Yang (2023). Understanding the effect of cobalt on the precipitation hardening behavior of the maraging stainless steel. Journal of Materials Research and Technology.DOI
276. Hao Feng, Haijian Wang, Huabing Li, Wei‐Chao Jiao, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang (2023). Softening Behavior and Hardness Prediction of H13 Hot‐Work Die Steel during Isothermal Tempering. steel research international.DOI
277. Yabo Wang, Hao Feng, Huabing Li, Yumeng Zhang, Zhouhua Jiang, Xiaodong Wang (2023). Study on the mechanism of excellent strength and toughness combination of a high nitrogen martensitic stainless steel treated by Q-C-P-T process. Journal of Materials Research and Technology.DOI
278. Kean Yao, Yanwu Dong, Zhouhua Jiang, Yong Wang, Jing-zhe Sun (2023). Effect of cerium addition on cleanliness and magnetic properties of Fe-80Ni permalloy. Journal of Central South University.DOI
279. Tao Pan, Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Rui Zhang, Hao Feng (2023). Mechanism of local solidification time variations with melt rate during vacuum arc remelting process of 8Cr4Mo4V high-strength steel. Journal of Iron and Steel Research International.DOI
280. Lichun Zheng, Bo Peng, Yan Li, Kai Chen, Zebin Ren, Zhouhua Jiang (2023). Compositional Optimization of ESR Slags for H13 Steel Containing Ce and Mg. Metallurgical and Materials Transactions B.DOI
281. Zhiyu He, Huabing Li, Hong‐Chun Zhu, Yu Wang, Zhuo‐Wen Ni, Zhouhua Jiang, Hao Feng, Shucai Zhang (2023). Investigation on Porosity Formation With Pressure Drop Between Dendrite Tip and Root During Pressurized Solidification of 30Cr15Mo1N Ingot. Metallurgical and Materials Transactions B.DOI
282. Wei Gong, Pengfei Wang, Hongliang Zhang, Yu Zhang, Zhouhua Jiang (2023). Effect of Mg treatment and cooling rate on primary carbides in GH3128 alloy. Journal of Materials Research and Technology.DOI
283. Yang Li, Hao Chun Yang, Guang Ming Xu, Changyong Chen, Zhouhua Jiang, Ling Xia, Wenyu Li (2023). Effect of Ultrahigh Mg on Carbide Spheroidization and Properties of Alloy Tool Steel. steel research international.DOI
284. Hong‐Chun Zhu, Rui Zhang, Huabing Li, Zhouhua Jiang, Shucai Zhang, Yifeng Geng (2023). Evolution of Temperature Field of Slabs during the Feeding Strip Process in Continuous Casting. steel research international.DOI
285. Jiawei Li, Yulong Cao, Guangqiang Li, Chongsheng Ma, Zhouhua Jiang (2023). Study on the Interface of Stainless Steel/Carbon Steel Clad Plate Produced by Electroslag Fusion Welding. JOM.DOI
286. Rui Zhang, Huabing Li, Hong‐Chun Zhu, Zhouhua Jiang, Hao Feng, Shucai Zhang (2023). Cooling Capacity Evolution of Steel Strip during Oscillatory Feeding Process in Slab Continuous Casting. steel research international.DOI
287. Xin Geng, Zhouhua Jiang, Fu-Bin Liu (2023). Numerical Investigation on Solidification Behavior of Slab Ingot during Electroslag Remelting Process. Processes.DOI
288. Haijian Wang, Huabing Li, Hao Feng, Wei‐Chao Jiao, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang (2023). A novel high nitrogen hot-work die steel 3Cr5Mo2SiVN achieving excellent hardness-strength-toughness balance. Materials Characterization.DOI
289. Yu Zhang, Huaying Li, Xuedong Zhou, Zhouhua Jiang, Hua Ding (2023). Influence of morphological parameter on the mechanical properties in a heterostructured medium Mn steel. Archives of Civil and Mechanical Engineering.DOI
290. Т. О. Dergach, G. D. Sukhomlin, L. M. Deineko, Zhouhua Jiang, Jialong Tian (2023). The Influence of Surface-Active Elements on Grains Boundary Structure and Resistance Against Intergranular Corrosion of Austenitic Cr–Ni and Cr–Ni–Mo Steels. Materials Science.DOI
291. L.B. Medovar, Ganna Stovpchenko, Людмила Лісова, Zhouhua Jiang, Yanwu Dong, Congpeng Kang (2023). Features and Restrictions of Electroslag Remelting with Silica‐Bearing Slags for Lightweight High Manganese Steel. steel research international.DOI
292. Kean Yao, Yanwu Dong, Zhouhua Jiang, Yong Wang, Yushuo Li, Shuyang Du (2023). Effect of Magnesium Treatment on Cleanliness, Microstructure, and Magnetic Properties of Fe–80Ni Permalloy. steel research international.DOI
293. Lichun Zheng, Jian Lou, Xiaolu Wang, Qingfeng Tan, Kai Chen, Huabing Li, Zhouhua Jiang (2023). Formation Behavior of AlN Precipitates in Super-Duplex Stainless Steel and the Impact on Mechanical Properties. Metallurgical and Materials Transactions A.DOI
294. Shou-Xing Yang, Huabing Li, Hao Feng, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang, Min Chen (2023). Effects of Atmosphere and Na2O in Slag on Inclusion Characteristics of Al-Killed Fe–18Cr–18Mn Remelted by (P)ESR Process. Metallurgical and Materials Transactions B.DOI
295. Fubin Liu, Xinhao Yu, Huabing Li, Zhouhua Jiang, Hong‐Chun Zhu, Xin Geng (2023). Effect of melt current on multi-physical field and heat flow distribution during ESR process based on model of dynamic formation of slag skin. Journal of Iron and Steel Research International.DOI
296. Xinxu Li, Chonglin Jia, Ang Yu, Zhouhua Jiang (2023). Effect of Cooling Rates on Solidification Microstructures and Tensile Property of a Novel Wrought Superalloy. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
297. Zhimin You, H.L. Zhang, Senlin Cui, Zhouhua Jiang, In‐Ho Jung (2023). Critical Evaluation and Thermodynamic Re-Optimization of the Si–P and Si–Fe–P Systems. Materials.DOI
298. Yang Li, Changyong Chen, Jianbo Lv, Hao Chun Yang, Shuai Ma, Meng Sun, Zhouhua Jiang (2023). The Effect of Magnesium Treatment on the Inclusions, Microstructure, and Mechanical Properties of M7 High-Speed Steel. Journal of Materials Engineering and Performance.DOI
299. Meng Sun, Zhouhua Jiang, Yang Li, Changyong Chen, Yunqie Mao, Shuai Ma, Yucheng Wang, Hang Liu (2023). Effect of La Content on Inclusion Morphology in Automobile Sulfur‐Containing Gear Steel SCr420H. steel research international.DOI
300. Yu-Xiao Liu, Yanwu Dong, Zhouhua Jiang, Yu-shuo Li, Wei Zha, Yao-xin Du, Shuyang Du (2023). XGBoost-based model for predicting hydrogen content in electroslag remelting. Journal of Iron and Steel Research International.DOI
301. Jiangtao Yu, Shucai Zhang, Huabing Li, Zhouhua Jiang, Hao Feng, Bin Zhang, Hong‐Chun Zhu, Yu-Bo Dai (2023). Influence mechanism of cerium addition on precipitation behaviour of super austenitic stainless steel S32654. Journal of Materials Research and Technology.DOI
302. Wenyu Zan, Beiyue Ma, Yutong Cao, Jialong Tian, Zhangyan Zhou, Lulu Wang, Zhouhua Jiang (2023). Preparation and performance optimization of MgAl2O4 spinel materials by single-step reaction sintering. Ceramics International.DOI
303. Bin Geng, Dongping Zhan, Zhouhua Jiang, Yongkun Yang (2023). Effect of CaO-MgO-FeO-SiO2-xNa2O Slag System on Converter Dephosphorization. Metals.DOI
304. Huabing Li, Zhuo‐Wen Ni, Hong‐Chun Zhu, Zhiyu He, Hao Feng, Shucai Zhang, Zhouhua Jiang, Yu Wang (2023). Elimination Mechanism of Shrinkage Porosity During Pressurized Solidification Process of 19Cr14Mn4Mo1N High-Nitrogen Steel Ingot. Metallurgical and Materials Transactions B.DOI
305. Yang Li, Changyong Chen, Qi Wang, Hao Chun Yang, Shuai Ma, Meng Sun, Zhouhua Jiang (2023). Effect of magnesium on microstructure and properties of 440C stainless bearing steel melted under pressurized conditions. Journal of Iron and Steel Research International.DOI
306. Qi Wang, Yanwu Dong, Zhouhua Jiang, Jun Huang (2023). Effects of Trace Additions of Magnesium on Microstructure and Properties of Fe–36Ni Invar Alloy. steel research international.DOI
307. Jiemin Gao, Jinyao Ma, Song Yang, Zhensen Guo, Jie Ma, Huabing Li, Zhouhua Jiang, Peide Han (2023). Grain boundary co-segregation of B and Ce hindering the precipitates of S31254 super austenitic stainless steel. Journal of Materials Research and Technology.DOI
308. Huabing Li, Wei‐Chao Jiao, Hao Feng, Haijian Wang, Hong‐Chun Zhu, Zhouhua Jiang, Xinyu Huo, Wei Wu (2023). Roles of N-Alloying and Austenitizing Temperature in Tuning the Hardness and Strengthening–Toughening Behavior of M42 High-Speed Steel. Metallurgical and Materials Transactions A.DOI
309. Xin Geng, Boyang Li, Zhouhua Jiang (2023). Effect of TiO2 on viscosity and structure for CaO-SiO2-Al2O3-based mold flux. Calphad.DOI
310. Wei‐Chao Jiao, Huabing Li, Hao Feng, Haijian Wang, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang, Wei Wu (2023). Improved High‐Temperature Softening Resistance and Wear Resistance of AISI M42 High‐Speed Steel by N‐Alloying. steel research international.DOI
311. Cai Liu, Caili Zhang, Yi Zhang, Junyu Ren, Jinyao Ma, Huabing Li, Zhouhua Jiang, Peide Han (2023). Vacancy at stacking fault-assisted nucleation of transition-metal carbides and nitrides in Fcc-Fe. Applied Physics A.DOI
312. Huabing Li, Peng‐Chong Lu, Hao Feng, Pengfei Zhang, Shucai Zhang, Zhouhua Jiang (2023). Influence Mechanism of Crucible Materials on Cleanliness and Inclusion Characteristics of High-Nitrogen Stainless Bearing Steel During Vacuum Carbon Deoxidation. Metallurgical and Materials Transactions B.DOI
313. Ling-Feng Xia, Huabing Li, Hao Feng, Zhouhua Jiang, Hong‐Chun Zhu, Shucai Zhang, Xiaodong Wang (2023). Enhanced strength and toughness of high nitrogen stainless bearing steel by controlling interstitial partitioning via V-microalloying. Journal of Material Science and Technology.DOI
314. Wei‐Chao Jiao, Huabing Li, Hao Feng, Haijian Wang, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang, Wei Wu (2023). Exploring the Influence Mechanisms of Tempering Temperature and N‐alloying on Mechanical Properties of AISI M42 High‐Speed Steel. steel research international.DOI
315. Song Yang, Jinyao Ma, Chao Chen, Caili Zhang, Junyu Ren, Zhouhua Jiang, Guangwei Fan, Peide Han (2023). Effects of B and Ce Grain Boundary Segregation on Precipitates in Super Austenitic Stainless Steel. Metals.DOI
316. Hao Feng, Huabing Li, Jin-Dong Qu, Jing Jie Dai, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang, Tong He, Tao Zhang (2023). Unveiling the significant contribution of matrix elements to passivation behaviour and corrosion resistance of alloys by modelling approach. Corrosion Science.DOI
317. Fuyang Li, Jialong Tian, Huabing Li, L. M. Deineko, Zhouhua Jiang (2023). Simultaneously Enhancing Strength, Ductility and Corrosion Resistance of a Martensitic Stainless Steel via Substituting Carbon by Nitrogen. Acta Metallurgica Sinica (English Letters).DOI
318. Junyu Ren, Yi Zhang, Song Yang, Jinyao Ma, Caili Zhang, Zhouhua Jiang, Huabing Li, Peide Han (2023). Effect of Boron Addition on the Oxide Scales Formed on 254SMO Super Austenitic Stainless Steels in High-Temperature Air. Metals.DOI
319. Qi Wang, Yanwu Dong, Zhouhua Jiang, Jun Huang (2023). Enhancing low thermal expansion behavior and strength via induced Zr-rich intermetallic phase in Fe-36Ni Invar alloy. Materials & Design.DOI
320. Wenyu Zan, Beiyue Ma, Jianhuai Tang, Kun Liu, Yutong Cao, Jialong Tian, Zhouhua Jiang (2023). Preparation and properties of MgAl2O4 spinel ceramics by double-doped CeO2 and La2O3. Ceramics International.DOI
321. Yi Zhang, Jinyao Ma, Huabing Li, Hongxia Wang, Youwei Du, Zhouhua Jiang, Peide Han (2023). Improved corrosion resistance of super austenite stainless steel by B-induced nucleation of Laves phase. Corrosion Science.DOI
322. Xin Geng, Boyang Li, Zhouhua Jiang (2023). Evaluation of Surface Tension of CaO–SiO2–Al2O3‐Based Mold Flux Containing Ce2O3. steel research international.DOI
323. Jihang Li, Dongping Zhan, Zhouhua Jiang, Huishu Zhang, Yongkun Yang, Yangpeng Zhang (2023). Progress on improving strength-toughness of ultra-high strength martensitic steels for aerospace applications: a review. Journal of Materials Research and Technology.DOI
324. Yang Li, Changyong Chen, Lu Bai, Ju Wang, Qi Wang, Shuai Ma, Zhouhua Jiang (2023). Influence of Cu and Sn on the microstructure and properties of antibacterial ferritic stainless steel. Metallurgical Research & Technology.DOI
325. 支卫军，姚赞，姜周华（2022）. 高碳镀锌钢丝组织差异性精细表征研究. 《东北大学学报(自然科学版)》.
326. 董艳伍，彭飞，田家龙，姜周华（2022）. 时效对10Ni10Mn2CuAl钢组织及性能的影响. 《东北大学学报(自然科学版)》.
327. 支卫军，陈常勇，姜周华（2022）. 扭转角度对桥梁缆索钢丝组织的影响. 《宝钢技术》.
328. Panpan Xu, Jinyao Ma, Zhouhua Jiang, Yi Zhang, Chao-Xiong Liang, Nan Dong, Pei-De Han (2022). Effects of B segregation on Mo-rich phase precipitation in S31254 super-austenitic stainless steels: Experimental and first-principles study. Chinese Physics B.DOI
329. 王礼超，田家龙，任吉，蒋成钢，游志敏，姜周华（2022）. Ce/Mg处理对M50轴承钢洁净度的影响. 《工程科学学报》.
330. 杨静，董楠，姜周华，韩培德（2022）. 合金元素在fcc-Fe/NbX(X=C,N)界面的偏析及影响. 《金属热处理》.
331. 郑立春，陈孝琦，任宏雨，娄健，姜周华（2022）. 还原时间对不锈钢粉尘碳热还原产物形貌和尺寸的影响. 《第十三届中国钢铁年会论文集——9.能源、环保与资源利用》.DOI
332. 姜周华（2022）. 给夹杂物穿上“铌铠甲”——利用铌微合金化改善双相不锈钢耐蚀性的新方法. 《第十三届中国钢铁年会论文集（摘要）——大会特邀报告&分会场特邀报告》.DOI
333. 马帅，李阳，姜周华，孙萌，陈常勇，刘航（2022）. Ce对440C不锈轴承钢夹杂物演变的影响. 《中国冶金》.
334. 孙萌，姜周华，李阳，陈常勇，陈奎，龚伟（2022）. 汽车悬架用弹簧钢55SiCr制备技术的研究进展. 《中国冶金》.
335. 张海宝，刘福斌，李花兵，耿鑫，姜周华（2022）. 冷却速率对N06625合金凝固过程微观偏析的影响. 《中国冶金》.
336. 杨静，张翊，董楠，李花兵，韩培德，姜周华（2022）. 合金元素在NbC/fcc-Fe界面的偏析行为和硼的影响（英文）. 《稀有金属材料与工程》.
337. 邹涛，王鹏，董艳伍，姜周华（2022）. Ce-Mg合金加入对GCr15轴承钢夹杂物和凝固组织的影响. 《特殊钢》.
338. 刘新，战东平，姜周华，张慧书，安杰，李涛，孙大利，吴昱（2022）. EAF→LF→VD→CC流程SAE8620RH齿轮钢中夹杂物分析. 《炼钢》.
339. 汤鉴淮，马北越，昝文宇，田家龙，姜周华，邓承继（2022）. 镁铝尖晶石基耐火材料抗侵蚀及其与钢液作用进展. 《炼钢》.
340. 徐光，陈常勇，姜周华（2022）. 超细切割钢丝用盘条组织差异性精细表征研究. 《炼钢》.
341. 侯昱，耿鑫，李博洋，李晓凯，姜周华（2022）. Fe-Ni-Cr系合金连铸保护渣冷却过程矿相析出热力学分析. 《特殊钢》.
342. 何志禹，潘涛，王宇，姜周华，李花兵，倪卓文，朱红春（2022）. 水平连续加料电弧炉废钢预热效率的研究. 《第十三届中国钢铁年会论文集——10.冶金设备与工程技术》.DOI
343. 马帅，李阳，姜周华，孙萌，鸡永帅，刘航（2022）. 不同脱氧方式对440C不锈轴承钢夹杂物的影响. 《第十三届中国钢铁年会论文集——7.先进钢铁材料及其应用》.DOI
344. 鸡永帅，李阳，姜周华，马帅，孙萌，李立业（2022）. Nb、V对440C不锈轴承钢析出相影响的热力学分析. 《第十三届中国钢铁年会论文集——7.先进钢铁材料及其应用》.DOI
345. 贺彤，王海建，李花兵，冯浩，焦卫超，姜周华（2022）. 含氮热作模具钢的研究现状与发展. 《钢铁研究学报》.
346. 龚伟，王鹏飞，姜周华，王瑞（2022）. 真空感应熔炼AerMet100超高强度钢脱氮实验研究. 《钢铁研究学报》.
347. 张红亮，龚伟，姜周华，王鹏飞（2022）. 镁对GH3625合金一次碳化物析出的影响. 《钢铁》.
348. 陶学儒，耿鑫，姜周华，李扬，彭雷朕（2022）. 硼元素对FB2钢组织和力学性能的影响. 《钢铁》.
349. 曹雨桐，马北越，田家龙，任鑫明，付高峰，姜周华（2022）. 添加氧化铈对反应烧结制备镁铝尖晶石材料性能的影响. 《钢铁研究学报》.
350. Yushuo Li, Yanwu Dong, Zhouhua Jiang, Qingfei Tang, Shuyang Du, Zhiwen Hou (2022). Influence of rare earth Ce on hot deformation behavior of as-cast Mn18Cr18N high nitrogen austenitic stainless steel. International Journal of Minerals Metallurgy and Materials.DOI
351. Cong-lin Yao, Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Hongbin Lu, Shucai Zhang, Hao Feng (2022). Numerical investigation on melting characteristics of scrap with heat and mass transfers in molten steel. Journal of Iron and Steel Research International.DOI
352. Yang Li, Changyong Chen, Hao Hu, Hao Chun Yang, Meng Sun, Zhouhua Jiang (2022). Effect of Slag Adjustment on Inclusions and Mechanical Properties of Si-Killed 55SiCr Spring Steel. Crystals.DOI
353. Wei Gong, Rongao Zhou, Pengfei Wang, Zhouhua Jiang, Xin Geng (2022). Effect of Al2O3 and TiO2 Contents in the Refining Slag on Al and Ti Contents of Incoloy825 Alloy. ISIJ International.DOI
354. Yang Li, Hao Chun Yang, Zhouhua Jiang, Huabing Li, Meng Sun, Shuai Ma (2022). Change of Spinel in High Ca Treament at 38CrMoAl Steel. ISIJ International.DOI
355. Xu-Ze Li, Huabing Li, Hao Feng, Shou-Xing Yang, Shucai Zhang, Hong‐Chun Zhu, Zhouhua Jiang (2022). Nitrogen Solubility in Molten Ni, Ni-Cr, Ni-Mo, and Ni-Cr-Mo Alloys Under Pressurized Atmosphere. Metallurgical and Materials Transactions B.DOI
356. Zhiyu He, Huabing Li, Hong‐Chun Zhu, Yu Wang, Zhuo‐Wen Ni, Zhouhua Jiang, Hao Feng, Shucai Zhang (2022). Evolution of Precipitated Phase and Dendritic Structure Around Nitrogen Pore in 30Cr15Mo1N Ingot. Metallurgical and Materials Transactions B.DOI
357. Huabing Li, Yu Han, Hao Feng, Gang Zhou, Zhouhua Jiang, Minghui Cai, Yizhuang Li, Mingxin Huang (2022). Enhanced strength-ductility synergy via high dislocation density-induced strain hardening in nitrogen interstitial CrMnFeCoNi high-entropy alloy. Journal of Material Science and Technology.DOI
358. Hao Feng, Yu Han, Huabing Li, Yanzhong Tian, Hong‐Chun Zhu, Zhouhua Jiang, Tong He, Gang Zhou (2022). Enhancement in impact toughness of CoCrFeMnNi high-entropy alloy via nitrogen addition. Journal of Alloys and Compounds.DOI
359. Lichun Zheng, Baiqiang Yan, Jian Lou, Huabing Li, Zhouhua Jiang (2022). Formation Behavior of M2C and M6C Eutectic Carbides in M42 High-Speed Steel. ISIJ International.DOI
360. Xin Geng, Xue-ru Tao, Zhouhua Jiang, Leizhen Peng, Fubin Liu, Huabing Li (2022). Effect of N Content on Precipitated Phase and Long-term Aging Stability of 9CrMoCoB Steel. ISIJ International.DOI
361. Shucai Zhang, Yifeng Geng, Huabing Li, Zhouhua Jiang, Xi-Min Zang, Hong‐Chun Zhu, Hao Feng, Binbin Zhang (2022). Design of a Novel Physical Simulator for Simulating Solidification Process of Continuous Casting Steel Slab. Metallurgical and Materials Transactions B.DOI
362. Xin Geng, Boyang Li, Zhouhua Jiang, Hou Yu (2022). Effect of Mold Flux Containing Ce2O3 on the Contents of Aluminum, Silicon, and Titanium in Incoloy825 Super Alloy. Advances in Materials Science and Engineering.DOI
363. Ming Yuan He, Shuai Ma, Lijia Zhao, Xiaowei Zhu, Zhouhua Jiang, Qiang Wang (2022). Optimizing Design of Vortex Suppression Utilizing Static Electromagnetic Field during Steel Teeming from Ladle. steel research international.DOI
364. Shucai Zhang, Huabing Li, Zhouhua Jiang, Binbin Zhang, Junyu Ren, Hong‐Chun Zhu, Hao Feng, Peide Han (2022). A new insight into the mechanism of Y enhancing high-temperature oxidation resistance of high-Mo stainless steel. Materials Letters.DOI
365. Xiaoli Zhang, Maonian Xun, Jinyao Ma, Xiaohong Liang, Caili Zhang, Huabing Li, Zhouhua Jiang, Guangwei Fan, Peide Han (2022). Effects of heat treatment on precipitation and corrosion resistance of cerium-containing super austenitic stainless steel S31254. Corrosion Communications.DOI
366. Congpeng Kang, Fubin Liu, Zhouhua Jiang, Haibao Zhang, Shineng Ding (2022). Effect of nitrogen content on solidification behaviors and morphological characteristics of the precipitates in 55Cr17Mo1VN plastic die steel. Materials Characterization.DOI
367. Panpan Xu, Jinyao Ma, Zhouhua Jiang, Huabing Li, Yi Zhang, Nan Dong, Peide Han (2022). Effect of B and Ce on the grain boundary segregation of Mo-rich phases in super-austenitic stainless steels. Applied Physics A.DOI
368. Si Liu, Yi Zhang, Junyu Ren, Nan Dong, Caili Zhang, Jinyao Ma, Zhouhua Jiang, Huabing Li, Peide Han (2022). Effect of Mo and Cr on S-Induced Intergranular Fracture in γ-Fe. Metals.DOI
369. Zhimin You, Mingze Ran, Zhouhua Jiang, Min‐Kyu Paek, In‐Ho Jung (2022). Thermodynamics of Nitrogen in Molten Fe–Cr–Mn–C–N Alloys. steel research international.DOI
370. Shucai Zhang, Huabing Li, Mingze Ran, Zhouhua Jiang, Lichun Zheng, Hao Feng, Jiangtao Yu, Yu-Bo Dai (2022). Effect of Al2O3 on Viscosity and Refining Ability of High Basicity Slag for Heat-resistant Austenitic Stainless Steel. ISIJ International.DOI
371. Meng Sun, Zhouhua Jiang, Yang Li, Huabing Li, Changyong Chen, Shuai Ma, Yongshuai Ji, Ju Wang, Yanshuo Ma (2022). Effect of the Timing Addition of Ferrosilicon with Al and Ca Impurities on Inclusion Formation in Al‐Killed Automobile Gear Steel SCr420H. steel research international.DOI
372. Changyong Chen, Lu Wang, Meng Sun, Xiaoqing Chen, Yang Li, Zhouhua Jiang (2022). Recent advances in inclusions and central segregation control technology in tyre cord steel and saw wire steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
373. Xinming Ren, Beiyue Ma, Jialong Tian, Zhouhua Jiang (2022). The effects of pre-sintering temperature and La2O3 addition on sinterability and corrosion resistance of stoichiometric magnesium aluminate spinel. Ceramics International.DOI
374. Yulong Cao, Zhengrong Zhao, Xiangliang Wan, Guangqiang Li, Zhouhua Jiang, Yanwu Dong (2022). Carbide Characteristics of High Vanadium High-speed Steel Manufactured by Electroslag Remelting. ISIJ International.DOI
375. Zhiwen Hou, Yanwu Dong, Zhouhua Jiang, Zhihao Hu, Limeng Liu, Kunjie Tian (2022). Effect of an external magnetic field on improved electroslag remelting cladding process. International Journal of Minerals Metallurgy and Materials.DOI
376. Hao Feng, Huabing Li, Ling-Feng Xia, Hong‐Chun Zhu, Shucai Zhang, Zhouhua Jiang (2022). A Promising Pressurized Duplex Manufacturing Route of High Nitrogen Stainless Steel. steel research international.DOI
377. Zhiwen Hou, Yanwu Dong, Zhouhua Jiang, L.B. Medovar, Ganna Stovpchenko, Tao Zou, Jun Guo Huang, Xinwei Wang, Junwei Dong (2022). Interface bonding mechanism and heat treatment of the composite roll manufactured by electroslag remelting cladding method. Journal of Materials Research and Technology.DOI
378. Yushuo Li, Yanwu Dong, Zhouhua Jiang, Kean Yao, Shuyang Du, Yuxiao Liu, Zhiwen Hou (2022). Study on microsegregation and homogenization process of a novel nickel-based wrought superalloy. Journal of Materials Research and Technology.DOI
379. Boyang Li, Xin Geng, Zhouhua Jiang, Wei Gong (2022). Effect of Ce2O3 on Viscosity and Structure for CaO–SiO2–Al2O3-based Mold Flux. ISIJ International.DOI
380. Xin Geng, Xue-ru Tao, Zhouhua Jiang, Peng-lei Zhen, Fubin Liu, Huabing Li (2022). Effect of B2O3 on ESR Slag Viscosity for Remelting 9CrMoCoB Steel. ISIJ International.DOI
381. Guoxing Qiu, Dong-ping Zhan, Lei Cao, Zhouhua Jiang (2022). Review on development of reduced activated ferritic/martensitic steel for fusion reactor. Journal of Iron and Steel Research International.DOI
382. Meng Sun, Zhouhua Jiang, Yang Li, Changyong Chen, Shuai Ma, Ju Wang, Yongshuai Ji, Yanshuo Ma (2022). Laboratory Study on the Formation of Endogenous CaO‐Containing Inclusion in Gear Steel SCr420H during the Simulated LF Refining Process without Ca Treatment. steel research international.DOI
383. Lichun Zheng, Annelies Malfliet, Baiqiang Yan, Zhouhua Jiang, Bart Blanpain, Muxing Guo (2022). Role of Interfacial Properties in the Evolution of Non-metallic Inclusions in Liquid Steel. ISIJ International.DOI
384. Hao Feng, Huabing Li, Jing Jie Dai, Yu Han, Jin-Dong Qu, Zhouhua Jiang, Yang Zhao, Tao Zhang (2022). Why CoCrFeMnNi HEA could not passivate in chloride solution? – A novel strategy to significantly improve corrosion resistance of CoCrFeMnNi HEA by N-alloying. Corrosion Science.DOI
385. Fubin Liu, Kui Chen, Congpeng Kang, Zhouhua Jiang, Shineng Ding (2022). Effects of V–Nb microalloying on the microstructure and properties of spring steel under different quenching-tempering times. Journal of Materials Research and Technology.DOI
386. Zhimin You, Zhouhua Jiang, In‐Ho Jung (2022). Critical evaluation and thermodynamic optimization of the Si-N, Si-C, C-N and Si-C-N systems and its applications to high purity SiC production. Journal of the European Ceramic Society.DOI
387. Jing Jie Dai, Huabing Li, Hao Feng, Zhouhua Jiang, Jin-Dong Qu, Yang Zhao, Tao Zhang (2022). Revealing significant effect of nitrogen on prolonging pitting corrosion lifetime of martensitic stainless steel by modelling approach. Corrosion Science.DOI
388. Pengfei Wang, Wei Gong, Zhouhua Jiang, Rui Wang (2022). Reaction mechanism between MgO crucible and AerMet100 steel during vacuum induction melting. Ceramics International.DOI
389. Yulong Cao, Chongsheng Ma, Zhouhua Jiang, Jiaqi Yan, Guangqiang Li (2022). Element Migration and Diffusion at the Bonding Interface of the Bimetallic Composite Billet Produced by the ESRC Method. Metallurgical and Materials Transactions B.DOI
390. Yongkun Yang, Dongping Zhan, Guoxing Qiu, Xiaoming Li, Zhouhua Jiang, Huishu Zhang (2022). Inclusion evolution in solid steel during rolling deformation: a review. Journal of Materials Research and Technology.DOI
391. Wei‐Chao Jiao, Huabing Li, Hao Feng, Haijian Wang, Zhouhua Jiang, Wei Wu (2022). High-Temperature Annealing Significantly Enhances Intrinsic Hot Workability of the As-cast High-Nitrogen M42 High-Speed Steel. Metallurgical and Materials Transactions A.DOI
392. Huabing Li, Zhiyu He, Hong‐Chun Zhu, Hao Feng, Zhouhua Jiang, Yu Wang, Zhuo‐Wen Ni, Yu-Bo Dai (2022). Influence Mechanism of Pressure on Nitrogen Bubble Formation During Solidification Process in 30Cr15Mo1N Ingot. Metallurgical and Materials Transactions B.DOI
393. Peng‐Chong Lu, Huabing Li, Hao Feng, Zhouhua Jiang, Yu-Bo Dai (2022). Improving Cleanliness and Controlling Inclusion Characteristics in High-Nitrogen Stainless Bearing Steels by Optimizing Addition Order and Contents of Mg and Ce. Metallurgical and Materials Transactions B.DOI
394. Hao Feng, Jing Jie Dai, Huabing Li, Zhouhua Jiang, Jin-Dong Qu, Yang Zhao, Shucai Zhang, Tao Zhang (2022). Sn microalloying enhances corrosion resistance of stainless steel by accelerating heterogeneous nucleation of passive film. Corrosion Science.DOI
395. Fubin Liu, Congpeng Kang, Ruiqing Qian, Zhouhua Jiang, Xin Geng, Huabing Li (2022). Effect of Tempering Temperature on Microstructure and Properties of a New Type of Nitrogen‐Containing Hot‐Work Die Steel 3Cr7Mo2NiSiVN. steel research international.DOI
396. Shuai Li, Jinyao Ma, Jian Wang, Guangwei Fan, Huabing Li, Zhouhua Jiang, Peide Han, Wei Min Liang (2022). Impact of boron addition on the hot deformation behavior and microstructure evolution of S31254. Materials Letters.DOI
397. Conglin Yao, Zhouhua Jiang, Hong‐Chun Zhu, Tao Pan (2022). Characteristics Analysis of Fluid Flow and Heating Rate of a Molten Bath Utilizing a Unified Model in a DC EAF. Metals.DOI
398. Hao Feng, Huabing Li, Xuze Li, Zhouhua Jiang, Shou-Xing Yang, Hong‐Chun Zhu, Shucai Zhang, Tong He (2022). Nitrogen Solubility and Gas Nitriding Kinetics in Fe–Cr–Mo–C Alloy Melts under Pressurized Atmosphere. ISIJ International.DOI
399. Shou-Xing Yang, Huabing Li, Hao Feng, Zhouhua Jiang, Xu-Ze Li, Min Chen, Yu-Bo Dai (2022). Reaction Mechanism and Control Strategy of Aluminum Increase in High Nitrogen Stainless Bearing Steel During Pressurized Electroslag Remelting. Metallurgical and Materials Transactions B.DOI
400. Wei‐Chao Jiao, Huabing Li, Hao Feng, Zhouhua Jiang, Haijian Wang, Hong‐Chun Zhu, Peide Han, Wei Wu (2022). Significant Improvement of Cleanliness and Macro/Microstructure of As-Cast AISI M42 High-Speed Steel by Mg Treatment. Metallurgical and Materials Transactions B.DOI
401. Shucai Zhang, Huabing Li, Zhouhua Jiang, Hao Feng, Zhejian Wen, Junyu Ren, Peide Han (2022). Unveiling the mechanism of yttrium significantly improving high-temperature oxidation resistance of super-austenitic stainless steel S32654. Journal of Material Science and Technology.DOI
402. Hao Feng, Peng‐Chong Lu, Huabing Li, Zhouhua Jiang (2022). Effect of Mg Pretreatment and Ce Addition on Cleanliness and Inclusion Evolution in High-Nitrogen Stainless Bearing Steels. Metallurgical and Materials Transactions B.DOI
403. Lichun Zheng, Annelies Malfliet, Hongyu Ren, Zhouhua Jiang, Bart Blanpain, Muxing Guo (2022). Effect of Reduction Parameters on the Size and Morphology of the Metallic Particles in Carbothermally Reduced Stainless Steel Dust. Journal of Sustainable Metallurgy.DOI
404. Meng Sun, Zhouhua Jiang, Yang Li, Changyong Chen, Shuai Ma, Yongshuai Ji, Wang Ju, Hang Liu (2022). Effect of Sulfur Content on the Inclusion and Mechanical Properties in Ce-Mg Treated Resulfurized SCr420H Steel. Metals.DOI
405. Fubin Liu, Haoyang Suo, Huabing Li, Zhouhua Jiang, Zhuo‐Wen Ni, Xin Geng, Hong‐Chun Zhu (2022). Numerical Investigation on Solidification Shrinkage Behavior of P900 Hollow Ingot during Electroslag Remelting Process. steel research international.DOI
406. Yang Li, Changyong Chen, Guo‐Qing Qin, Zhouhua Jiang (2022). Smelting high purity 55SiCr automobile suspension spring steel with different refractories. High Temperature Materials and Processes.DOI
407. Ming Yuan He, Lianyu Wang, Yonglin LI, Lijia Zhao, Zhouhua Jiang, Qiang Wang (2022). A model to predict coil temperature evolution during the whole thermal cycle process of ladle with a novel steel teeming technology. Journal of Thermal Science and Technology.DOI
408. 邹涛，战东平，庄生磊，姜周华，张慧书（2021）. 氧燃枪喷吹工艺数值模拟研究. 《材料与冶金学报》.DOI
409. 于新皓，王傲，刘福斌，姜周华，李花兵，耿鑫（2021）. 电流对电渣重熔过程多场耦合行为和凝固参数影响的数值模拟. 《钢铁研究学报》.
410. 李花兵，张树才，蔺岳，冯浩，姜周华（2021）. 给夹杂物穿上“铌铠甲”——利用铌微合金化改善双相不锈钢耐蚀性的新方法. 《第十一届全国腐蚀与防护大会论文摘要集》.DOI
411. 战东平，杨永坤，姜周华，雷洪（2021）. 加热过程钢中夹杂物演变的研究进展. 《钢铁》.DOI
412. 王剑，李帅，白晋钢，韩培德，李花兵，姜周华（2021）. B微合金化对S31254超级奥氏体不锈钢组织结构及耐蚀性能的影响研究. 《第十一届全国腐蚀与防护大会论文摘要集》.DOI
413. 李阳，孙深，何盼，姜周华，姚聪林，董君伟（2021）. 铌钛稳定化对铁素体不锈钢夹杂物、组织及性能的影响. 《材料热处理学报》.DOI
414. 战东平，屈乐欣，王东伟，姜周华，张慧书（2021）. 含Y2O3电渣重熔渣系对CLAM钢组织及力学性能的影响. 《钢铁研究学报》.DOI
415. 李旭泽，李花兵，杨守星，冯浩，姜周华，徐芳泓（2021）. C-HRA-5含Nb奥氏体耐热钢中氮的溶解行为研究. 《钢铁研究学报》.DOI
416. 汪成义，吴巍，姜周华，杨利彬，赵进宣（2021）. 210 t转炉底吹供气参数优化模拟研究. 《钢铁研究学报》.DOI
417. 陈孝琦，郑立春，何淑雅，姜周华，谷洁美（2021）. 不锈钢粉尘碳热还原产物金属颗粒形貌和尺寸. 《材料与冶金学报》.DOI
418. 杨永坤，战东平，姜周华，雷洪（2021）. Zr处理对含Ti低碳微合金钢中氮化物的影响. 《东北大学学报(自然科学版)》.
419. 孙萌，姜周华，李阳，马帅，陈常勇，刘航（2021）. Ce-Mg复合处理对含硫齿轮钢SCr420H洁净度的影响. 《钢铁》.DOI
420. 高涛，王剑，李花兵，白晋钢，韩培德，姜周华（2021）. 硼微合金化对6Mo超级奥氏体不锈钢微观组织及耐蚀性影响. 《钢铁研究学报》.DOI
421. 姜周华，康从鹏，刘福斌，董艳伍，耿鑫（2021）. 特种冶金生产流程的发展趋势. 《材料与冶金学报》.DOI
422. 安瑞栋，刘福斌，陈奎，高俊哲，康从鹏，姜周华（2021）. 电渣重熔GH984G定向凝固组织CAFE法模拟. 《钢铁》.DOI
423. Jialong Tian, Kai Chen, Huabing Li, Zhouhua Jiang (2021). Suppressing grain boundary embrittlement via Mo-driven interphase precipitation mechanism in martensitic stainless steel. Materials Science and Engineering A.DOI
424. Jialong Tian, Zhouhua Jiang (2021). Exploring New Strategies for Ultrahigh Strength Steel via Tailoring the Precipitates. Frontiers in Materials.DOI
425. Xuejie Li, Peng Zhou, Hao Feng, Zhouhua Jiang, Huabing Li, Kevin Michael Ogle (2021). Spontaneous passivation of the CoCrFeMnNi high entropy alloy in sulfuric acid solution: The effects of alloyed nitrogen and dissolved oxygen. Corrosion Science.DOI
426. Jiangtao Yu, Shucai Zhang, Huabing Li, Zhouhua Jiang, Hao Feng, Panpan Xu, Peide Han (2021). Influence mechanism of boron segregation on the microstructure evolution and hot ductility of super austenitic stainless steel S32654. Journal of Material Science and Technology.DOI
427. Congpeng Kang, Fubin Liu, Huaibei Zheng, Huabing Li, Zhouhua Jiang, Kui Chen, Haoyang Suo, Xinhao Yu (2021). Microstructure evolution and mechanical properties of PESR 55Cr17Mo1VN plastic die steel during quenching and tempering treatment. Journal of Iron and Steel Research International.DOI
428. Lulu Wang, Beiyue Ma, Xinming Ren, Chao Yu, Jialong Tian, Chunming Liu, Chengji Deng, Chuanbo Hu, Zhaoyang Liu, Jingkun Yu, Zhouhua Jiang (2021). Phase-engineering strategy of ZrO2 for enhancing the mechanical properties of porous cordierite ceramics. Materials Today Communications.DOI
429. Fubin Liu, Hai-bo Cao, Huabing Li, Zhouhua Jiang, Xin Geng (2021). Effects of current path on structure and segregation during electroslag remelting process of Inconel 718 alloy with same power input. Journal of Iron and Steel Research International.DOI
430. Hong‐Chun Zhu, Huabing Li, Zhuo‐Wen Ni, Zhiyu He, Zhouhua Jiang, Hao Feng, Shucai Zhang, Dong-Sheng Mao (2021). Effect of Solidification Pressure on Phase Transformation and Precipitated Phases of 30Cr15Mo1N Ingot. Metallurgical and Materials Transactions B.DOI
431. Congpeng Kang, Fubin Liu, Zhouhua Jiang, Haoyang Suo, Xinhao Yu, Haibao Zhang, Shineng Ding (2021). Effect of cryogenic treatment on microstructure evolution and mechanical properties of high nitrogen plastic die steel. Journal of Materials Research and Technology.DOI
432. Beiyue Ma, Xinming Ren, Gao Zhi, Jialong Tian, Zhouhua Jiang, Wenyu Zan, Jingkun Yu, Fan Qian, Yingnan Cao, Gaofeng Fu (2021). Synthesis of Al 2 O 3 ‐SiC powder from electroceramics waste and its application in low‐carbon MgO‐C refractories. International Journal of Applied Ceramic Technology.DOI
433. Changyong Chen, Meng Sun, Xiaoqing Chen, Bao Wang, Jianan Zhou, Zhouhua Jiang (2021). State of the Art in Control of Inclusions and Microalloying Elements in Tire Cord Steel and Saw Wire Steel. steel research international.DOI
434. Changyong Chen, Meng Sun, Bao Wang, Jianan Zhou, Zhouhua Jiang (2021). Recent Advances on Drawing Technology of Ultra-Fine Steel Tire Cord and Steel Saw Wire. Metals.DOI
435. Shucai Zhang, Jiangtao Yu, Huabing Li, Zhouhua Jiang, Yifeng Geng, Hao Feng, Bin Zhang, Hong‐Chun Zhu (2021). Refinement mechanism of cerium addition on solidification structure and sigma phase of super austenitic stainless steel S32654. Journal of Material Science and Technology.DOI
436. Hao Feng, Huabing Li, Zhuangzhuang Liu, Zhouhua Jiang, Peng‐Chong Lu, Tong He (2021). Cleanliness Control of High Nitrogen Stainless Bearing Steel by Vacuum Carbon Deoxidation in a PVIM Furnace. Metallurgical and Materials Transactions B.DOI
437. Yulong Cao, Jiawei Li, Guangqiang Li, Yanwu Dong, Zhouhua Jiang (2021). Effect of Conductive Circuits on Bonding Quality of Bimetallic Composite Roll Produced by Electroslag Remelting Cladding. JOM.DOI
438. Hong‐Chun Zhu, Huabing Li, Zhiyu He, Hao Feng, Zhouhua Jiang (2021). Effect of Solidification Pressure on Gap Width between H13 Ingot and Mold. Metallurgical and Materials Transactions B.DOI
439. Zhiwen Hou, Yanwu Dong, Zhouhua Jiang, Limeng Liu, Shuyang Du, Zhihao Hu (2021). Effect of Current-Carrying Mold Current on Multi-physics Fields and Interface Bonding Quality of Compound Rolls. Metallurgical and Materials Transactions B.DOI
440. Yang Li, Qi Wang, Meng Sun, Changyong Chen, Zhouhua Jiang (2021). Experimental Study on Rare Earth and Magnesium Composite Treatment of 49MnVS3 Non‐quenched and Tempered Steel. steel research international.DOI
441. Zhiyu He, Huabing Li, Zhuo‐Wen Ni, Hong‐Chun Zhu, Zhouhua Jiang, Hao Feng, Dong-Sheng Mao (2021). Effect of Pressure on Second Dendrite Arm Spacing and Columnar to Equiaxed Transition of 30Cr15Mo1N Ingot. steel research international.DOI
442. Yulong Cao, Yanwu Dong, Guangqiang Li, Zhouhua Jiang, Zhengrong Zhao (2021). Solid-state phase transformation of ductile cast iron during electroslag remelting cladding. International Journal of Cast Metals Research.DOI
443. Fubin Liu, Junzhe Gao, Hai-bo Cao, Huabing Li, Zhouhua Jiang, Xin Geng, Congpeng Kang, Kui Chen, Rui-dong An (2021). Effect of slag composition on elements oxidation behavior of GH984G superalloy for electroslag remelting withdrawal process. Journal of Iron and Steel Research International.DOI
444. Yulong Cao, Yanwu Dong, Zhouhua Jiang, Guangqiang Li, Zhengrong Zhao (2021). Characteristics of High Speed Steel/ductile Cast Iron Composite Roll Manufactured by Electroslag Remelting Cladding. ISIJ International.DOI
445. Peng‐Chong Lu, Huabing Li, Hao Feng, Zhouhua Jiang, Hong‐Chun Zhu, Zhuangzhuang Liu, Tong He (2021). Formation Mechanism of AlN Inclusion in High-Nitrogen Stainless Bearing Steels. Metallurgical and Materials Transactions B.DOI
446. Wei Gong, Lixiang Zhang, Lei Zhang, Zhouhua Jiang, Engang Wang (2021). Influence of Ce Addition on Microstructure and Corrosion Resistance of 2101 Duplex Stainless Steel. steel research international.DOI
447. Wei Gong, Cheng Wang, Pengfei Wang, Zhouhua Jiang, Rui Wang, Huabing Li (2021). Effect of La on inclusions and fracture toughness of low-alloy ultra-high-strength 40CrNi2Si2MoVA steel. Journal of Iron and Steel Research International.DOI
448. Yifeng Geng, Zhao Cheng-lin, Xi-Min Zang, Yi-Dong Wang, Huabing Li, Dejun Li, Zhouhua Jiang, Shucai Zhang (2021). Feeding Steel Strip Technology in Continuous Casting Process: A Review. steel research international.DOI
449. Yongkun Yang, Dongping Zhan, Hong Lei, Yulu Li, Xin Liu, Zhouhua Jiang, Huishu Zhang (2021). Research on Inclusion Evolution during Re-Heating Process in Ti-Zr Deoxidized Low Carbon Steel. Metallurgical and Materials Transactions B.DOI
450. Hong‐Chun Zhu, Huabing Li, Zhiyu He, Hao Feng, Zhouhua Jiang, Tong He (2021). Effect of Pressure on Dendrite Structure and Characteristics of Carbides during Solidification Process of H13 Die Steel Ingot. ISIJ International.DOI
451. Yu Han, Huabing Li, Hao Feng, Yanzhong Tian, Zhouhua Jiang, Tong He (2021). Mechanism of dislocation evolution during plastic deformation of nitrogen-doped CoCrFeMnNi high-entropy alloy. Materials Science and Engineering A.DOI
452. Bin Zhang, Huabing Li, Shucai Zhang, Zhouhua Jiang, Yue Lin, Hao Feng, Hong‐Chun Zhu (2021). Effect of nitrogen on precipitation behavior of hyper duplex stainless steel S32707. Materials Characterization.DOI
453. Lichun Zheng, Huabing Li, Xiaolu Wang, Zhouhua Jiang, Hao Feng (2021). Effect of CaF2 on Viscosity and Refining Ability of Highly Basic Slags for Duplex Stainless Steel. ISIJ International.DOI
454. Li-wei Xu, Huaibei Zheng, Huabing Li, Zhouhua Jiang, Shucai Zhang, Jiangtao Yu, Hao Feng, Yue Lin (2021). Precipitation behavior of P550 steel for non-magnetic drill collars during isothermal aging at 650–900 °C. Journal of Iron and Steel Research International.DOI
455. Shou-Xing Yang, Huabing Li, Hao Feng, Zhouhua Jiang, Min Chen, Tong He (2021). Desulfurization Behavior of Fe-18Cr-18Mn Alloy during the Pressurized Electroslag Remelting with Different Atmospheres and Na2O-containing Slags. Metallurgical and Materials Transactions B.DOI
456. Cong-Lin Yao, Hong‐Chun Zhu, Zhouhua Jiang, Tao Pan (2021). Numerical Analysis of Fluid Flow and Heat Transfer by Means of a Unified Model in a Direct Current Electric Arc Furnace. steel research international.DOI
457. Shou-Xing Yang, Huabing Li, Hao Feng, Xuze Li, Zhouhua Jiang, Tong He (2021). Nitrogen Solubility in Liquid Fe–Nb, Fe–Cr–Nb, Fe–Ni–Nb and Fe–Cr–Ni–Nb Alloys. ISIJ International.DOI
458. Boyang Li, Xin Geng, Zhouhua Jiang, Yu Hou, Wei Gong (2021). Effects of BaO and B2O3 on the Absorption of Ti Inclusions for High Titanium Steel. Metals.DOI
459. Zhiwen Hou, Yanwu Dong, Zhouhua Jiang, Kean Yao, Yushuo Li, Yulong Cao (2021). Transient Simulations and Experiments on Compound Roll Produced by Electroslag Remelting Cladding. Metallurgical and Materials Transactions B.DOI
460. Jialong Tian, Guang Hu, Wei Wang, Yiyin Shan, Zhouhua Jiang (2021). Torsional deformation-induced gradient hierarchical structure in a 304 stainless steel. Journal of Iron and Steel Research International.DOI
461. Dong Hua Hou, Deyong Wang, Zhouhua Jiang, Tianpeng Qu, Huihua Wang, Junwei Dong (2021). Investigation on Slag–Metal-Inclusion Multiphase Reactions During Electroslag Remelting of Die Steel. Metallurgical and Materials Transactions B.DOI
462. 曹玉龙，姜周华，董艳伍，李光强，赵峥嵘（2020）. 电渣复合法制备双金属复合轧辊的研究进展. 《特殊钢》.
463. 汪成义，吴巍，杨利彬，赵舸，罗啟泷，姜周华（2020）. 120t转炉底吹供气系统控制模型与应用效果. 《特殊钢》.
464. 李阳，陈常勇，刘聪颍，孙萌，姜周华（2020）. Mg处理对30CrNi2MoVA钢夹杂物的影响. 《物理测试》.DOI
465. 彭雷朕，姜周华，耿鑫，李晓凯（2020）. 超超临界火电站用COST-FB2转子钢控氮工艺研究. 《东北大学学报(自然科学版)》.
466. 姚聪林，朱红春，姜周华，潘涛（2020）. 电弧炉内长电弧等离子体的数值模拟. 《工程科学学报》.
467. Yang Li, Chang-Yong Chen, G. Qin, Zhou-Hua Jiang (2020). Effect of Crucible Material on Inclusions in 55SiCr Spring Steel.DOI
468. 王佳喜，王东伟，邱国兴，蔡南，战东平，姜周华（2020）. 外加Y2Ti2O7纳米粒子对CLAM钢夹杂物的影响. 《工程科学学报》.DOI
469. 王佳喜，战东平，刘新，黄乔乔，姜周华，张慧书（2020）. 电弧炉中浸入式吹氮过程钢液吸氮行为研究. 《材料与冶金学报》.DOI
470. 李博洋，耿鑫，姜周华，王闯（2020）. 保护渣对铝钛系夹杂物溶解的吸收规律. 《连铸》.DOI
471. 董艳伍，侯志文，姜周华（2020）. 基于导电结晶器的电渣重熔技术研究. 《第十届中国金属学会青年学术年会暨第四届辽宁青年科学家论坛会议指南》.DOI
472. 姜周华，姚聪林，朱红春，潘涛（2020）. 电弧炉炼钢技术的发展趋势. 《钢铁》.
473. 李鑫旭，贾崇林，张勇，吕少敏，姜周华（2020）. 一种新型高温合金的初熔相及溶解动力学（英文）. Transactions of Nonferrous Metals Society of China.
474. 李鑫旭，贾崇林，张勇，吕少敏，姜周华（2020）. 一种高γ'相含量GH4151高温合金铸锭的开裂机制（英文）. Transactions of Nonferrous Metals Society of China.
475. 王东伟，战东平，邱国兴，马竞翔，姜周华，张慧书（2020）. 回火温度对CLAM钢组织及性能的影响. 《材料热处理学报》.DOI
476. 孙深，李阳，孙萌，张磊，姜周华（2020）. Ce对汽车气门弹簧钢65Si2CrV组织性能的影响. 《材料热处理学报》.DOI
477. 李阳，陈常勇，孙萌，秦国清，姜周华（2020）. 耐火材料对95Cr切割丝用钢中夹杂物的影响. 《钢铁》.DOI
478. 屈乐欣，王东伟，葛启桢，战东平，姜周华，张慧书（2020）. 电渣重熔对Y-RAFM钢组织及力学性能的影响. 《上海金属》.
479. 王东伟，战东平，屈乐欣，周永欣，姜周华，张慧书（2020）. 烧结温度对9Cr ODS钢力学性能的影响研究. 《金属功能材料》.DOI
480. 姚聪林，朱红春，姜周华，潘涛，张锐，王广瑞，罗长永（2020）. 全废钢连续加料电弧炉短流程碳排放计算及分析. 《材料与冶金学报》.DOI
481. 潘涛，姜周华，朱红春，姚聪林（2020）. 电弧炉废钢预热技术的发展现状. 《材料与冶金学报》.DOI
482. 彭雷朕，姜周华，耿鑫（2020）. B2O3对电渣重熔冶炼COST-FB2钢用CaF2基熔渣挥发性能的影响. 《材料与冶金学报》.DOI
483. Wen-Jie Tong, Wanming Li, X. Zang, Hua-Bing Li, Zhou-Hua Jiang, Yu Han (2020). Droplet Formation and Dripping Behavior during the Electroslag Remelting Process with Two Series-Connected Electrodes. Metals.DOI
484. Jialong Tian, Wei Wang, Huabing Li, Ke Yang, Zhouhua Jiang (2020). Understanding main factors controlling high cycle fatigue crack initiation and propagation of high strength maraging stainless steels with Ti addition. Materials Science and Engineering A.DOI
485. Yang Li, Conglin Yao, Huabing Li, Lu Bai, Pengfei Du, Changyong Chen, Zhouhua Jiang (2020). Effect of Cu Addition on the Microstructure and Passivation Behavior of Sn Alloyed Ferritic Stainless Steel in NaCl Solution. Journal of Materials Engineering and Performance.DOI
486. Congpeng Kang, Fubin Liu, Xin Geng, Zhouhua Jiang, Kui Chen, Junzhe Gao, Rui-dong An (2020). Desulfurization Behavior of Low-sulfur Plastic Die Steel during ESR Process under Different Atmospheres. ISIJ International.DOI
487. Hong‐Chun Zhu, Huabing Li, Zhiyu He, Hao Feng, Zhouhua Jiang (2020). Effect of Pressure on Inclusion Number Distribution During the Solidification Process of H13 Die Steel Ingot. Metallurgical and Materials Transactions B.DOI
488. Xinxu Li, Chonglin Jia, Zhouhua Jiang, Yong Zhang, Shaomin Lv (2020). Investigation of Solidification Behavior in a New High Alloy Ni-Based Superalloy. JOM.DOI
489. Xin-xu LI, Chonglin Jia, Yong Zhang, Shao-min LÜ, Zhouhua Jiang (2020). Cracking mechanism in as-cast GH4151 superalloy ingot with high γ′; phase content. Transactions of Nonferrous Metals Society of China.DOI
490. Yulong Cao, Guangqiang Li, Zhouhua Jiang, Yanwu Dong, Zhengrong Zhao, Chenrui Niu (2020). Interface Characteristics of GCr15/45 Carbon Steel Composite Billet Produced by Electroslag Remelting Cladding. MATERIALS TRANSACTIONS.DOI
491. Kui Chen, Huabing Li, Zhouhua Jiang, Fubin Liu, Congpeng Kang, Xiaodong Ma, Baojun Zhao (2020). Multiphase microstructure formation and its effect on fracture behavior of medium carbon high silicon high strength steel. Journal of Material Science and Technology.DOI
492. Xinxu Li, Zhouhua Jiang, Zhipeng Wan, Yong Zhang, Chonglin Jia, Tao Wang, Zhao Li (2020). Effect of Hot Deformation Parameters on Grain Refinement of an As-Cast Ni-Based Superalloy. Journal of Materials Engineering and Performance.DOI
493. Wei Gong, Pengfei Wang, Lei Zhang, Zhouhua Jiang (2020). Effects of Ce on Microstructure and Mechanical Properties of LDX2101 Duplex Stainless Steel. Metals.DOI
494. Dong Hua Hou, Deyong Wang, Zhouhua Jiang, Tianpeng Qu, Huihua Wang (2020). The Design of Slag and Electroslag Remelting Production Technology of Steel Containing Zirconium. Journal of Sustainable Metallurgy.DOI
495. Wanming Li, Shi-chao Jiao, Wenjie Tong, Xi-min Zang, Dejun Li, Zhouhua Jiang, Huabing Li, Yu-an Jing (2020). An innovative method for calibrating local cooling rate in electroslag remelting of M42 high-speed steel. Journal of Iron and Steel Research International.DOI
496. Hong‐Chun Zhu, Huabing Li, Zhouhua Jiang, Zhiyu He, Hao Feng, Shucai Zhang (2020). Quantitative Correlation between Interfacial Heat Transfer Coefficient and Pressure for 19Cr-14Mn-0.9N High Nitrogen Steel Cylindrical Ingot. ISIJ International.DOI
497. Yang Li, Changyong Chen, Guo‐Qing Qin, Zhouhua Jiang, Meng Sun, Kui Chen (2020). Influence of crucible material on inclusions in 95Cr saw-wire steel deoxidized by Si-Mn. International Journal of Minerals Metallurgy and Materials.DOI
498. Xin-xu LI, Chonglin Jia, Yong Zhang, Shao-min LÜ, Zhouhua Jiang (2020). Incipient melting phase and its dissolution kinetics for a new superalloy. Transactions of Nonferrous Metals Society of China.DOI
499. Wei‐Chao Jiao, Huabing Li, Hao Feng, Zhouhua Jiang, Ling-Feng Xia, Shucai Zhang, Hong‐Chun Zhu, Wei Wu (2020). Evolutions of Micro- and Macrostructure by Cerium Treatment in As-Cast AISI M42 High-Speed Steel. Metallurgical and Materials Transactions B.DOI
500. Yu Han, Huabing Li, Hao Feng, Kemei Li, Yanzhong Tian, Zhouhua Jiang (2020). Simultaneous enhancement in strength and ductility of Fe50Mn30Co10Cr10 high-entropy alloy via nitrogen alloying. Journal of Material Science and Technology.DOI
501. Leizhen Peng, Zhouhua Jiang, Xin Geng (2020). Design of ESR slag for remelting 9CrMoCoB steel through experiments and thermodynamic calculations. Calphad.DOI
502. Yulong Cao, Guangqiang Li, Zhouhua Jiang, Yanwu Dong, Zhengrong Zhao, Chenrui Niu (2020). Effect of Electrode Immersion Depth on the Electrical Resistance and Heat Generation in the Electroslag Remelting Process. JOM.DOI
503. Kui Chen, Zhouhua Jiang, Fubin Liu, Huabing Li, Xiaodong Ma, Baojun Zhao, Congpeng Kang, Yang Li (2020). Enhanced mechanical properties by retained austenite in medium–carbon Si-rich microalloyed steel treated by quenching–tempering, austempering and austempering–tempering processes. Materials Science and Engineering A.DOI
504. Li-wei Xu, Huabing Li, Huaibei Zheng, Peng‐Chong Lu, Hao Feng, Shucai Zhang, Wei‐Chao Jiao, Zhouhua Jiang (2020). Effects of nitrogen content on pitting corrosion resistance of non-magnetic drill collar steel. Journal of Iron and Steel Research International.DOI
505. Jing Jie Dai, Hao Feng, Huabing Li, Huabing Li, Zhouhua Jiang, Hao Li, Hao Li, Shucai Zhang, Peng Zhou, Tao Zhang (2020). Nitrogen significantly enhances corrosion resistance of 316L stainless steel in thiosulfate-chloride solution. Corrosion Science.DOI
506. Wanming Li, Shi-chao Jiao, Wenjie Tong, Ximin Zang, Gang Wang, Zhouhua Jiang, Huabing Li (2020). Effect of Secondary Aerosol Cooling on the Characteristics of Carbides in M42 High‐Speed Steel Produced by the Electroslag Remelting Withdrawal Process. steel research international.DOI
507. Wei Gong, Zhouhua Jiang, Lixiang Zhang, Changyong Chen, Yanwu Dong (2020). Influence of Mg addition on inclusions and mechanical properties of Cr12Mo1V1 steel under high pressure. Materials Science and Engineering A.DOI
508. Yu Han, Huabing Li, Hao Feng, Kemei Li, Yanzhong Tian, Zhouhua Jiang (2020). Enhancing the strength and ductility of CoCrFeMnNi high-entropy alloy by nitrogen addition. Materials Science and Engineering A.DOI
509. Li-Wei Xu, Huabing Li, Zhouhua Jiang, Minghui Cai, Wei‐Chao Jiao, Hao Feng, Shucai Zhang, Peng‐Chong Lu (2020). Hot Deformation Behavior of P550 Steels for Nonmagnetic Drilling Collars. steel research international.DOI
510. Wenjie Tong, Wanming Li, Ximin Zang, Huabing Li, Zhouhua Jiang, Dejun Li (2020). A Comprehensive Mathematical Model of Electroslag Remelting with Two Series-Connected Electrodes Based on Sequential Coupling Simulation Method. Metals.DOI
511. Yongkun Yang, Dongping Zhan, Hong Lei, Yulu Li, Rongjian Wang, Jiaxi Wang, Zhouhua Jiang, Huishu Zhang (2020). Effect of Addition ZrO2 Nanoparticles on Inclusion Characteristics and Microstructure in Low Carbon Microalloyed Steel. ISIJ International.DOI
512. Leizhen Peng, Zhouhua Jiang, Xin Geng (2020). Reaction mechanisms between molten CaF2-based slags and molten 9CrMoCoB steel. International Journal of Minerals Metallurgy and Materials.DOI
513. Kui Chen, Zhouhua Jiang, Fubin Liu, Huabing Li, Congpeng Kang, Wenchao Zhang, Ao Wang (2020). Achievement of High Ductility and Ultra-high Strength of V-Nb Microalloyed Spring Steel by Austempered Multiphase Microstructure. Metallurgical and Materials Transactions A.DOI
514. Li Xinxu, Jia Chonglin, Zhang Yong, Lv Shaomin, Zhouhua Jiang (2020). Segregation and homogenization for a new nickel-based superalloy. Vacuum.DOI
515. Fu-Bin Liu, Jia Yu, Huabing Li, Zhouhua Jiang, Xin Geng (2020). Numerical Simulation of the Magneto‐Hydrodynamic Two‐Phase Flow and Heat Transfer during Electroslag Remelting Hollow Ingot Process. steel research international.DOI
516. Jia Yu, Fubin Liu, Zhouhua Jiang, Huabing Li, Congpeng Kang, Wenchao Zhang, Ao Wang, Xin Geng (2020). Effects of Nitrogen Gas Pressure on the Solidification Parameters and As-cast Microstructure Revolution during Pressurized Electroslag Remelting AISI 304 Stainless Steel. ISIJ International.DOI
517. Yongkun Yang, Dongping Zhan, Hong Lei, Yulu Li, Guoxing Qiu, Rongjian Wang, Zhouhua Jiang, Huishu Zhang (2020). Coupling Effect of Prior Austenite Grain Size and Inclusion Characteristics on Acicular Ferrite Formation in Ti-Zr Deoxidized Low Carbon Steel. Metallurgical and Materials Transactions B.DOI
518. Dongping Zhan, Guoxing Qiu, Changsheng Li, Yongkun Yang, Zhouhua Jiang, Huishu Zhang (2020). Evolution of Microstructures and Mechanical Properties of Zr-Containing Y-CLAM During Thermal Aging. Acta Metallurgica Sinica (English Letters).DOI
519. Guoxing Qiu, Dongping Zhan, Changsheng Li, Yongkun Yang, Min Qi, Zhouhua Jiang, Huishu Zhang (2020). Effects of Yttrium and Heat Treatment on the Microstructure and Mechanical Properties of CLAM Steel. Journal of Materials Engineering and Performance.DOI
520. Anguo Wang, Zhouhua Jiang, Yanchun Lou, Tang Ji, Yunlong Xiong, Yanwu Dong, Yanwu Dong, Fubin Liu, Jingchang Cheng, Rui Chen (2020). Up-pulling force analysis for ESC hollow cylindrical casting. China Foundry.DOI
521. Yulong Cao, Guangqiang Li, Zhouhua Jiang, Yanwu Dong, Zhengrong Zhao, Chenrui Niu (2020). Microstructure evolution of roll core during the preparation of composite roll by electroslag remelting cladding technology. High Temperature Materials and Processes.DOI
522. 李星，姜周华，耿鑫，陈闽俊，崔珊（2019）. 稀土镁处理对H13钢组织性能的影响研究. 《稀土元素镧铈钇应用研究研讨会暨广东省稀土产业技术联盟成立大会摘要集》.DOI
523. 王佳喜，屈乐欣，蔡南，战东平，姜周华，张慧书（2019）. Y2Ti2O7纳米颗粒对CLAM钢组织与性能的影响. 《上海金属》.
524. 李阳，杨光，姜周华，李花兵（2019）. 铈对27%Cr超级铁素体不锈钢凝固组织影响机制研究. 《中国稀土学报》.
525. 康旭，战东平，杨永坤，屈乐欣，刘越，姜周华，张慧书（2019）. 高铝精炼渣对重轨钢中夹杂物的影响. 《材料与冶金学报》.DOI
526. 张树才，姜周华，李花兵，张威，李国平，范光伟（2019）. 超级奥氏体不锈钢654SMO的研究与开发. 《2019年（首届）中国金属学会不锈钢科技发展论坛论文集》.DOI
527. 姚赞，陈常勇，黄宗泽，金峰，姜周华，李阳，王亚峰（2019）. 镀锌时间对桥梁缆索用钢丝组织及扭转性能的影响. 《材料热处理学报》.DOI
528. 李阳，白璐，姜周华，杜鹏飞，姚聪林（2019）. 稀土铈对含锡铜铁素体不锈钢组织和性能的影响. 《2019年（首届）中国金属学会不锈钢科技发展论坛》.DOI
529. 冯浩，李花兵，姜周华，焦卫超，代晶（2019）. 碳氮调控对航空高氮不锈轴承钢组织与性能的影响研究. 《2019年（首届）中国金属学会不锈钢科技发展论坛论文集》.DOI
530. 田家龙，王威，李花兵，姜周华，杨柯（2019）. 新一代飞机起落架用马氏体时效不锈钢的研究. 《2019年（首届）中国金属学会不锈钢科技发展论坛论文集》.DOI
531. 姜周华（2019）. 特殊钢特种冶金技术和生产流程的发展趋势. 《第十二届中国钢铁年会论文集——大会特邀报告&分会场特邀报告》.DOI
532. 姜周华，孙萌，李阳，陈常勇（2019）. 汽车用特殊钢中夹杂物控制技术的研究进展. 《材料与冶金学报》.DOI
533. 李花兵，姜周华，冯浩，朱红春（2019）. 高品质高氮钢加压冶金理论、制备技术及品种开发. 《第十二届中国钢铁年会论文集——大会特邀报告&分会场特邀报告》.DOI
534. Hao Feng, Hua-Bing Li, Peng-Chong Lu, Chun-Tian Yang, Zhou-Hua Jiang, Xiao-Lei Wu, Hao Feng, Hua-Bing Li, Peng-Chong Lu, Chun-Tian Yang, Zhou-Hua Jiang, Xiao-Lei Wu（2019）. 铜绿假单胞菌对 CrCoNi 中熵合金微生物腐蚀行为的影响.DOI
535. 张树才，姜周华，李花兵，张威，李国平，范光伟（2019）. 超级奥氏体不锈钢654SMO的研究进展. 《钢铁研究学报》.DOI
536. 邹涛，康旭，屈乐欣，战东平，张慧书，姜周华（2019）. 单流中间包控流装置优化的水模型试验与应用. 《炼钢》.
537. Shucai Zhang, Huabing Li, Zhouhua Jiang, Zhixing Li, Jingxi Wu, Binbin Zhang, Fei Duan, Hao Feng, Hong‐Chun Zhu (2019). Influence of N on precipitation behavior, associated corrosion and mechanical properties of super austenitic stainless steel S32654. Journal of Material Science and Technology.DOI
538. Meng Sun, Zhouhua Jiang, Yang Li, Changyong Chen, Kui Chen, Shen Sun, Qi Wang (2019). Effect of Ce–Mg–Fe Alloy Adding Timing on Formation and Evolution of Inclusions in SCr420H Gear Steel. ISIJ International.DOI
539. Leizhen Peng, Zhouhua Jiang, Xin Geng, Fubin Liu, Huabing Li (2019). Effect of B2O3 on the Crystallization Behavior of CaF2-Based Slag for Electroslag Remelting 9CrMoCoB Steel. Metals.DOI
540. Leizhen Peng, Zhouhua Jiang, Xin Geng (2019). Design of ESR Slag for Remelting 9CrMoCoB Steel under Simple Protective Ar Gas. Metals.DOI
541. Changyong Chen, Zhouhua Jiang, Yang Li, Meng Sun, Qi Wang, Kui Chen, Huabing Li (2019). State of the Art in the Control of Inclusions in Spring Steel for Automobile - a Review. ISIJ International.DOI
542. Dong-ping Zhan, Guoxing Qiu, Changsheng Li, Min Qi, Zhouhua Jiang, Hui-shu Zhang (2019). Effects of yttrium and zirconium additions on inclusions and mechanical properties of a reduced activation ferritic/martensitic steel. Journal of Iron and Steel Research International.DOI
543. Wei‐Chao Jiao, Huabing Li, Hao Feng, Zhouhua Jiang, Jing Jie Dai, Hong‐Chun Zhu, Shucai Zhang, Mansheng Chu, Wei Wu (2019). Effect of High Nitrogen Addition on Microstructure and Mechanical Properties of As-cast M42 High Speed Steel. ISIJ International.DOI
544. Yang Li, Peng-fei Du, Zhouhua Jiang, Cong-lin Yao, Lu Bai, Qi Wang, Guang Xu, Changyong Chen, Lei Zhang, Huabing Li (2019). Effects of TiC on the microstructure and formation of acicular ferrite in ferritic stainless steel. International Journal of Minerals Metallurgy and Materials.DOI
545. Shucai Zhang, Huabing Li, Zhouhua Jiang, Binbin Zhang, Zhixing Li, Jingxi Wu, Hao Feng, Hong‐Chun Zhu, Fei Duan (2019). Chloride- and sulphate-induced hot corrosion mechanism of super austenitic stainless steel S31254 under dry gas environment. Corrosion Science.DOI
546. Haibo Cao, Zhouhua Jiang, Yanwu Dong, Fubin Liu, Zhiwen Hou, Kean Yao, Jia Yu (2019). Effect of Single Power Two Circuits Electroslag Remelting Process on the Cleanliness of the Remelted Ingot. ISIJ International.DOI
547. Jia Yu, Fubin Liu, Huabing Li, Zhouhua Jiang, Yang Li, Congpeng Kang, Ao Wang, Wenchao Zhang, Hao Feng (2019). Numerical Simulation and Experimental Investigation of Nitrogen Transfer Mechanism from Gas to Liquid Steel During Pressurized Electroslag Remelting Process. Metallurgical and Materials Transactions B.DOI
548. Guoxing Qiu, Dongping Zhan, Changsheng Li, Yongkun Yang, Zhouhua Jiang, Huishu Zhang (2019). Effects of electroslag remelting process and Y on the inclusions and mechanical properties of the CLAM steel. Nuclear Engineering and Technology.DOI
549. Yongkun Yang, Dongping Zhan, Hong Lei, Guoxing Qiu, Yulu Li, Zhouhua Jiang, Huishu Zhang (2019). In Situ Observation of Acicular Ferrite Nucleation and Growth at Different Cooling Rate in Ti-Zr Deoxidized Steel. Metallurgical and Materials Transactions B.DOI
550. Hao Feng, Huabing Li, Wei‐Chao Jiao, Zhouhua Jiang, Minghui Cai, Hong‐Chun Zhu, Zhi‐Gang Chen (2019). Significance of Partial Substitution of Carbon by Nitrogen on Strengthening and Toughening Mechanisms of High Nitrogen Fe-15Cr-1Mo-C-N Martensitic Stainless Steels. Metallurgical and Materials Transactions A.DOI
551. Kui Chen, Zhouhua Jiang, Fubin Liu, Jia Yu, Yang Li, Wei Gong, Changyong Chen (2019). Effect of quenching and tempering temperature on microstructure and tensile properties of microalloyed ultra-high strength suspension spring steel. Materials Science and Engineering A.DOI
552. Guoxing Qiu, Dongping Zhan, Changsheng Li, Yongkun Yang, Min Qi, Zhouhua Jiang, Huishu Zhang (2019). Influence of Inclusions on the Mechanical Properties of RAFM Steels Via Y and Ti Addition. Metals.DOI
553. Sha Lyu, Xiaodong Ma, Zongze Huang, Zan Yao, Hae-Geon Lee, Zhouhua Jiang, Geoff Wang, Jin Zou, Baojun Zhao (2019). Formation Mechanism of Al2O3-Containing Inclusions in Al-Deoxidized Spring Steel. Metallurgical and Materials Transactions B.DOI
554. Jialong Tian, Wei Wang, Huabing Li, M. Babar Shahzad, Yiyin Shan, Zhouhua Jiang, Ke Yang (2019). Effect of deformation on precipitation hardening behavior of a maraging steel in the aging process. Materials Characterization.DOI
555. Hao Feng, Huabing Li, Zhouhua Jiang, Tao Zhang, Nan Dong, Shucai Zhang, Peide Han, Sicong Zhao, Zhi‐Gang Chen (2019). Designing for high corrosion-resistant high nitrogen martensitic stainless steel based on DFT calculation and pressurized metallurgy method. Corrosion Science.DOI
556. Wei‐Chao Jiao, Huabing Li, Jing Jie Dai, Hao Feng, Zhouhua Jiang, Tao Zhang, Dake Xu, Hong‐Chun Zhu, Shucai Zhang (2019). Effect of partial replacement of carbon by nitrogen on intergranular corrosion behavior of high nitrogen martensitic stainless steels. Journal of Material Science and Technology.DOI
557. Yongkun Yang, Dongping Zhan, Hong Lei, Guoxing Qiu, Zhouhua Jiang, Huishu Zhang (2019). Formation of Non-Metallic Inclusion and Acicular Ferrite in Ti–Zr Deoxidized Steel. ISIJ International.DOI
558. Changyong Chen, Zhouhua Jiang, Yang Li, Lichun Zheng, Xinfeng Huang, Guang Hong Yang, Meng Sun, Kui Chen, Hao Chun Yang, Hao Hu, Huabing Li (2019). State of the Art in the Control of Inclusions in Tire Cord Steels and Saw Wire Steels – A Review. steel research international.DOI
559. Xing Li, Zhouhua Jiang, Xin Geng, Minjun Chen, Shan Cui (2019). Effect of Rare Earth–Magnesium Alloy on Inclusion Evolution in Industrial Production of Die Steel. steel research international.DOI
560. Xing Li, Zhouhua Jiang, Xin Geng, Minjun Chen, Leizhen Peng (2019). Evolution Mechanism of Inclusions in H13 Steel with Rare Earth Magnesium Alloy Addition. ISIJ International.DOI
561. Sha Lyu, Xiaodong Ma, Zongze Huang, Zan Yao, Hae-Geon Lee, Zhouhua Jiang, Geoff Wang, Jin Zou, Baojun Zhao (2019). Understanding the Formation and Evolution of Oxide Inclusions in Si-Deoxidized Spring Steel. Metallurgical and Materials Transactions B.DOI
562. Guoxing Qiu, Dongping Zhan, Changsheng Li, Min Qi, Zhouhua Jiang, Huishu Zhang (2019). Development of nano-structure China low-activation martensitic steel for fusion reactors. Materials Letters.DOI
563. Dongping Zhan, Guoxing Qiu, Changsheng Li, Min Qi, Zhouhua Jiang, Huishu Zhang (2019). Effects of Ti Addition on the Microstructure and Tensile Properties of China Low Activation Martensitic Steel for Nuclear Fusion Reactors. steel research international.DOI
564. Guoxing Qiu, Dongping Zhan, Changsheng Li, Min Qi, Zhouhua Jiang, Huishu Zhang (2019). Development of a micro-scale Y–Zr–O oxide-dispersion-strengthened steel fabricated via vacuum induction melting and electro-slag remelting. Nuclear Engineering and Technology.DOI
565. Zhouhua Jiang, Guang Ming Xu, Yang Li, Huabing Li, Jianbo Lv, Qi Wang (2019). Effect of Ultra-high Magnesium on SKS51 Liquid Steel Cleanliness and Microstructure. ISIJ International.DOI
566. Guoxing Qiu, Dongping Zhan, Changsheng Li, Min Qi, Yongkun Yang, Zhouhua Jiang, Huishu Zhang (2019). Effects of Yttrium on Microstructure Stability and Tensile Properties of China Low Activation Martensitic Steel. Metals.DOI
567. Shucai Zhang, Huabing Li, Zhouhua Jiang, Bin Zhang, Zhixing Li, Jingxi Wu, Sipeng Fan, Hao Feng, Hong‐Chun Zhu (2019). Effects of Cr and Mo on precipitation behavior and associated intergranular corrosion susceptibility of superaustenitic stainless steel S32654. Materials Characterization.DOI
568. Guoxing Qiu, Dongping Zhan, Changsheng Li, Min Qi, Zhouhua Jiang, Huishu Zhang (2019). Effects of Y and Ti addition on microstructure stability and tensile properties of reduced activation ferritic/martensitic steel. Nuclear Engineering and Technology.DOI
569. Yangpeng Zhang, Dongping Zhan, Xiwei Qi, Zhouhua Jiang, Huishu Zhang (2019). The role of twins during the aging process of secondary hardening ultrahigh-strength steel. Materials Letters.DOI
570. Yulong Cao, Zhouhua Jiang, Yanwu Dong, Guangqiang Li, Zhiwen Hou, Qiang Wang (2019). Research on the bimetallic composite roll produced by a new electroslag cladding method: microstructure and property of the bonding interface. Ironmaking & Steelmaking Processes Products and Applications.DOI
571. Yangpeng Zhang, Dongping Zhan, Xiwei Qi, Zhouhua Jiang (2019). Effect of tempering temperature on the microstructure and properties of ultrahigh-strength stainless steel. Journal of Material Science and Technology.DOI
572. Guoxing Qiu, Dongping Zhan, Changsheng Li, Min Qi, Zhouhua Jiang, Huishu Zhang (2019). Effect of Y/Zr Ratio on Inclusions and Mechanical Properties of 9Cr-RAFM Steel Fabricated by Vacuum Melting. Journal of Materials Engineering and Performance.DOI
573. Sha Lyu, Xiaodong Ma, Zongze Huang, Zan Yao, Hae-Geon Lee, Zhouhua Jiang, Geoff Wang, Jin Zou, Baojun Zhao (2019). Inclusion Characterization and Formation Mechanisms in Spring Steel Deoxidized by Silicon. Metallurgical and Materials Transactions B.DOI
574. Yang Li, Meng Sun, Zhouhua Jiang, Changyong Chen, Kui Chen, Xinfeng Huang, Shen Sun, Huabing Li (2019). Inclusion Modification in C104Cr Saw Wire Steel with Different Cerium Content. Metals.DOI
575. 师帅，耿鑫，姜周华，李花兵，徐芳泓，王立新（2018）. TiO2含量对于CaF2—Al2O3—CaO—MgO—TiO2五元电渣重熔渣系物性参数的影响. 《工程科学学报》.
576. 侯栋，王德永，屈天鹏，田俊，姜周华（2018）. 电渣重熔易切削钢中硫含量及夹杂物的控制. 《工程科学学报》.
577. 吴彬，姜周华，董艳伍，刘福斌，耿鑫，臧喜民，李万明（2018）. 电渣重熔过程钢的洁净度控制. 《辽宁科技大学学报》.
578. 高建兵，常朋飞，张彬彬，姜周华，李花兵（2018）. 铈对新型超级双相不锈钢2707HD夹杂物变性的影响. 《钢铁》.
579. 韩纪鹏，李阳，姜周华，汪秀秀，屈振昊，李广玉（2018）. 钢中低熔点元素的危害及含锡钢的发展研究. 《钢铁流程绿色制造与创新技术交流会》.
580. 白璐，李阳，姜周华，杜鹏飞，杨光，方勇（2018）. 含锡、铜铁素体不锈钢的机械性能及耐蚀性研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
581. 余嘉，陈奎，刘福斌，李花兵，姜周华，康从鹏（2018）. 同功率条件下结晶器电流对电渣重熔过程渣壳厚度的影响研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
582. 张彬彬，李花兵，姜周华，张树才，常朋飞，吴敬玺（2018）. Ce对特超级双相不锈钢00Cr27Ni7Mo5N组织和性能的影响. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
583. 张树才，李花兵，姜周华，李志兴，张彬彬，范思鹏，常朋飞，吴敬玺（2018）. 稀土对超级奥氏体不锈钢S32654夹杂物变性、析出行为与耐腐蚀性能的影响研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
584. 徐光，王琦，李阳，姜周华（2018）. 加压条件下对SKS51钢加镁的实验研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
585. 侯栋，王德永，姜周华，屈天鹏，田俊（2018）. 电渣重熔含Al、Ti高温合金的渣金反应及质量控制. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
586. 冯浩，李花兵，姜周华，张树才，朱红春，韩宇（2018）. 加压冶金制备高氮不锈轴承钢30Cr15Mo1N工艺研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
587. 陈奎，刘福斌，姜周华，康从鹏，张宇（2018）. 加压下高氮钢凝固组织模型建立及其合理性分析. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
588. 曹海波，姜周华，董艳伍，刘福斌（2018）. 导电结晶器电渣重熔对铸锭凝固质量影响研究. 《2018年（第二十届）全国炼钢学术会议大会报告及论文摘要集》.
589. 李阳，杜鹏飞，姜周华，姚聪林，秦国清，杨光（2018）. 稀土对含铜锡铁素体不锈钢中非金属夹杂物的影响. 《钢铁》.
590. 高建兵，范思鹏，张树才，姜周华，李花兵（2018）. 新型超级奥氏体不锈钢654SMO偏析行为及均匀化工艺. 《钢铁》.
591. 姜周华，李阳，龚伟，陈常勇，胡浩，庞昇（2018）. 特殊钢棒线材洁净冶炼技术. 《河北冶金》.
592. Chang-Yong Chen, Zhou-Hua Jiang, Yang Li, Meng Sun, Kui Chen, Qi Wang, Hua-Bing Li (2018). Effect of Na2O and Rb2O on Inclusion Removal in C96V Saw Wire Steels Using Low-Basicity LF (Ladle Furnace) Refining Slags. Metals.DOI
593. Bin-Bin Zhang, Shu-Cai Zhang, Zhi-Xing Li, Si-Peng Fan, Pengfei Chang, Jingxi Wu, Hao Feng, Zhou-Hua Jiang (2018). Research on the Passivation Behavior of Hyper Duplex Stainless Steel S32707 in Acidified Seawater Solution.DOI
594. Jia Yu, Fubin Liu, Huabing Li, Zhouhua Jiang, Kui Chen, Xin Geng (2018). Effects of Mold Current on Slag Skin and Heat Flow Distribution During Electroslag Remelting at Given Power Input. JOM.DOI
595. Yang Li, Guang Yang, Zhouhua Jiang, Changyong Chen, Shen Sun, Pengfei Du (2018). Effects of Ce on the microstructure and properties of 27Cr-3.8Mo-2Ni super-ferritic stainless steels. Ironmaking & Steelmaking Processes Products and Applications.DOI
596. Xing Li, Zhouhua Jiang, Xin Geng, Fubin Liu, Leizhen Peng, Shuai Shi (2018). Numerical simulation of a new electroslag remelting technology with current conductive stationary mold. Applied Thermal Engineering.DOI
597. Tianhai Wu, Jianjun Wang, Huabing Li, Zhouhua Jiang, Chunming Liu, Hongyang Zhang (2018). Effect of heat input on austenite microstructural evolution of simulated heat affected zone in 2205 duplex stainless steel. Journal of Iron and Steel Research International.DOI
598. Hao Feng, Zhouhua Jiang, Huabing Li, Peng‐Chong Lu, Shucai Zhang, Hong‐Chun Zhu, Binbin Zhang, Tao Zhang, Dake Xu, Zhi‐Gang Chen (2018). Influence of nitrogen on corrosion behaviour of high nitrogen martensitic stainless steels manufactured by pressurized metallurgy. Corrosion Science.DOI
599. Changyong Chen, Zhouhua Jiang, Yang Li, Meng Sun, Guoqing Qin, Conglin Yao, Qi Wang, Huabing Li (2018). Effect of Rb2O on Inclusion Removal in C96V Saw Wire Steels Using Low-Basicity LF Refining Slag. ISIJ International.DOI
600. Haibo Cao, Zhouhua Jiang, Yanwu Dong, Fubin Liu, Yulong Cao, Zhiwen Hou, Kean Yao, Murong Xu (2018). Effect of Single Power Two Circuits Electroslag Remelting Process on the Ingot Solidification Quality. steel research international.DOI
601. Shucai Zhang, Zhouhua Jiang, Huabing Li, Bin Zhang, Pengfei Chang, Jingxi Wu, Hao Feng, Hong‐Chun Zhu (2018). Catastrophic oxidation mechanism of hyper duplex stainless steel S32707 at high temperature in air. Materials Characterization.DOI
602. Guoxing Qiu, Dongping Zhan, Changsheng Li, Min Qi, Zhouhua Jiang, Huishu Zhang (2018). Effects of yttrium on microstructure and properties of reduced activation ferritic-martensitic steel. Materials Science and Technology.DOI
603. Tianhai Wu, Jianjun Wang, Huabing Li, Zhouhua Jiang, Chunming Liu, Hongyang Zhang (2018). Reformation Behavior of Austenite in 2205 Duplex Stainless Steel with Rapid Heat Treatment. steel research international.DOI
604. Yangpeng Zhang, Dongping Zhan, Xiwei Qi, Zhouhua Jiang (2018). Austenite and precipitation in secondary-hardening ultra-high-strength stainless steel. Materials Characterization.DOI
605. Yang Li, Changyong Chen, Zhouhua Jiang, Meng Sun, Hao Hu, Huabing Li (2018). Application of Alkali Oxides in LF Refining Slag for Enhancing Inclusion Removal in C96V Saw Wire Steel. ISIJ International.DOI
606. Dong Hua Hou, Zhouhua Jiang, Tianpeng Qu, Deyong Wang, Fubin Liu, Huabing Li (2018). Aluminum, titanium and oxygen control during electroslag remelting of stainless steel based on thermodynamic analysis. Journal of Iron and Steel Research International.DOI
607. Zhiwen Hou, Yanwu Dong, Zhouhua Jiang, Xin Deng, Yulong Cao, Haibo Cao, L.B. Medovar, Ganna Stovpchenko (2018). Simulation of Compound Rolls Produced by Electroslag Remelting Cladding Method. Metals.DOI
608. Jialong Tian, Wei Wang, M. Babar Shahzad, Wei Jin Yan, Yiyin Shan, Zhouhua Jiang, Ke Yang (2018). Corrosion Resistance of Co-containing Maraging Stainless Steel. Acta Metallurgica Sinica (English Letters).DOI
609. Yulong Cao, Zhouhua Jiang, Yanwu Dong, Xin Deng, L.B. Medovar, Ganna Stovpchenko (2018). Research on the Bonding Interface of High Speed Steel/Ductile Cast Iron Composite Roll Manufactured by an Improved Electroslag Cladding Method. Metals.DOI
610. Yangpeng Zhang, Dongping Zhan, Xiwei Qi, Zhouhua Jiang (2018). Effect of solid-solution temperature on the microstructure and properties of ultra-high-strength ferrium S53® steel. Materials Science and Engineering A.DOI
611. Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Hao Feng, Wei‐Chao Jiao, Shucai Zhang, Pengbo Wang, Junhui Zhu (2018). A Novel Method for Improving Cast Structure of M42 High Speed Steel by Pressurized Metallurgy Technology. ISIJ International.DOI
612. Dong Hua Hou, Fu-Bin Liu, Tianpeng Qu, Zhouhua Jiang, Deyong Wang, Yanwu Dong (2018). Behavior of Alloying Elements during Drawing-Ingot-Type Electroslag Remelting of Stainless Steel Containing Titanium. ISIJ International.DOI
613. Jialong Tian, M. Babar Shahzad, Wei Wang, Lichang Yin, Zhouhua Jiang, Ke Yang (2018). Role of Co in formation of Ni-Ti clusters in maraging stainless steel. Journal of Material Science and Technology.DOI
614. Hao Feng, Huabing Li, Xiaolei Wu, Zhouhua Jiang, Sicong Zhao, Tao Zhang, Dake Xu, Shucai Zhang, Hong‐Chun Zhu, Binbin Zhang, Muxin Yang (2018). Effect of nitrogen on corrosion behaviour of a novel high nitrogen medium-entropy alloy CrCoNiN manufactured by pressurized metallurgy. Journal of Material Science and Technology.DOI
615. Yulong Cao, Zhouhua Jiang, Yanwu Dong, Xin Deng, L.B. Medovar, Ganna Stovpchenko (2018). Research on the Bimetallic Composite Roll Produced by an Improved Electroslag Cladding Method: Mathematical Simulation of the Power Supply Circuits. ISIJ International.DOI
616. Yangpeng Zhang, Dongping Zhan, Xiwei Qi, Zhouhua Jiang, Huishu Zhang (2018). Effect of the Combined Addition of Y and Ti on the Second Phase and Mechanical Properties of China Low-Activation Martensitic Steel. Journal of Materials Engineering and Performance.DOI
617. Dong-ping Zhan, Yangpeng Zhang, Zhouhua Jiang, Hui-shu Zhang (2018). Model for Ruhrstahl–Heraeus (RH) decarburization process. Journal of Iron and Steel Research International.DOI
618. Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Pengbo Wang, Junhui Zhu (2018). Effect of Solidification Pressure on Thermodynamic and Kinetic Parameters of 19Cr14Mn4Mo0.9N High Nitrogen Steel. steel research international.DOI
619. Jia Yu, Fubin Liu, Zhouhua Jiang, Congpeng Kang, Kui Chen, Huabing Li, Xin Geng (2018). Numerical Simulation of the Dynamic Formation of Slag Skin and Heat Flow Distribution during the Electroslag Remelting Process. steel research international.DOI
620. Shucai Zhang, Zhouhua Jiang, Huabing Li, Bin Zhang, Sipeng Fan, Zhixing Li, Hao Feng, Hong‐Chun Zhu (2018). Precipitation behavior and phase transformation mechanism of super austenitic stainless steel S32654 during isothermal aging. Materials Characterization.DOI
621. 陈常勇，姜周华，李阳，孙萌（2017）. 钢帘线和切割丝用钢的夹杂物控制及其生产技术的发展. 《2017年全国高品质特殊钢生产技术研讨会论文摘要》.
622. 李万明，姜周华，臧喜民，邓鑫，邵青立，谢志彬（2017）. 抽锭电渣重熔大截面高速钢过程的碳化物偏析控制. 《中南大学学报(自然科学版)》.
623. 姜周华，龚伟，王承，战东平，王瑞（2017）. 超高强度钢高纯净熔炼技术. 《航空材料学报》.
624. 徐光，姜周华，李阳，张聪（2017）. X80管线钢CaS形成机理研究. 《东北大学学报(自然科学版)》.
625. 王安国，姜周华，娄延春，熊云龙（2017）. 空心环形件电渣熔铸内结晶器的对流换热系数. 《东北大学学报(自然科学版)》.
626. 余嘉，刘福斌，姜周华，陈奎（2017）. 工业规模电渣重熔过程电磁场的数值模拟. 《东北大学学报(自然科学版)》.
627. 余嘉，刘福斌，姜周华，陈奎，钱瑞清（2017）. 电渣重熔过程中渣壳动态形成的数值模拟. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
628. 彭雷朕，姜周华，耿鑫，李星，师帅（2017）. 真空感应炉冶炼含氮高合金钢控氮工艺. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
629. 秦国清，李阳，姜周华，杜鹏飞，刘浩，胡浩（2017）. TiN对430铁素体不锈钢微观组织影响研究. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
630. 姜周华，张新法，刘福斌，龚伟（2017）. 镍基高温合金生产用原材料有害杂质的控制. 《钢铁》.
631. 冯浩，姜周华，李花兵，韩宇，罗毅，丁伟（2017）. 淬火温度对30Cr15Mo1N高氮轴承钢组织和性能的影响. 《钢铁》.
632. 曹玉龙，姜周华，董艳伍，邓鑫，李传峥，侯志文（2017）. 电渣重熔法制备双金属复合轧辊的工艺研究. 《第十一届中国钢铁年会论文集——S03.轧制与热处理》.
633. 余强，姜骁箐，姜周华（2017）. 多功能炼钢中试系统研制及顶底复吹控制. 《材料与冶金学报》.
634. 刘承志，姜周华，李花兵，舒玮，张文茹，李志斌（2017）. 国际热核聚变实验堆磁体支撑用316LN板材制造技术开发. 《第十一届中国钢铁年会论文集——S02.炼钢与连铸》.
635. 梁轶杰，李阳，姜周华，杨光，杜鹏飞（2017）. 热处理工艺对超纯铁素体不锈钢组织性能的影响. 《第十一届中国钢铁年会论文集——S08.海洋工程用钢》.
636. Hua-Bing Li, Shou-Xing Yang, Shu-Cai Zhang, Bin-Bin Zhang, Zhou-Hua Jiang, H. Feng, Pei-De Han, Ji-Zhong Li（2017）. 摩擦撹拌溶接超オーステナイトステンレス鋼S32654のミクロ組織の発達と機械的性質【Powered by NICT】.
637. Shu-Cai Zhang, Zhou-Hua Jiang, Hua-Bing Li, H. Feng, Bin-Bin Zhang（2017）. 修飾電気化学的動電位再活性化法による老化した超オーステナイト系ステンレス鋼S32654の粒界腐食感受性の検出【Powered by NICT】.
638. Yanxin Qiao, Xiang Cai, Jinhua Chen, Jie Cui, Yong Tang, Huabing Li, Zhouhua Jiang (2017). Cavitation erosion properties of a nickel-free high-nitrogen Fe-Cr-Mn-N stainless steel. Materiali in tehnologije.DOI
639. Yanwu Dong, Zhiwen Hou, Zhouhua Jiang, Haibo Cao, Qianlong Feng, Yulong Cao (2017). Study of a Single-Power Two-Circuit ESR Process with Current-Carrying Mold: Mathematical Simulation of the Process and Experimental Verification. Metallurgical and Materials Transactions B.DOI
640. Zhouhua Jiang, Wei Gong, Cheng Wang, ZHAN Dongping, Rui Wang (2017). High Purity Smelting Technology for Ultra-high Strength Steels. DOAJ (DOAJ: Directory of Open Access Journals).DOI
641. Guoxing Qiu, Dong-ping Zhan, Zhouhua Jiang, Hui-shu Zhang (2017). Optimisation of the MgO/Al 2 O 3 ratio of high-alumina BF slag based on MOPSO algorithm. Ironmaking & Steelmaking Processes Products and Applications.DOI
642. Dongping Zhan, Guoxing Qiu, Zhouhua Jiang, Huishu Zhang (2017). Effect of Yttrium and Titanium on Inclusions and the Mechanical Properties of 9Cr RAFM Steel Fabricated by Vacuum Melting. steel research international.DOI
643. Jialong Tian, Wei Wang, M. Babar Shahzad, Wei Yan, Yiyin Shan, Zhouhua Jiang, Ke Yang (2017). A New Maraging Stainless Steel with Excellent Strength–Toughness–Corrosion Synergy. Materials.DOI
644. Zhouhua Jiang, Hong‐Chun Zhu, Huabing Li, Guohai Liu, Pengbo Wang, Junhui Zhu, Shucai Zhang, Hao Feng (2017). Effect of Solidification Pressure on Interfacial Heat Transfer and Solidification Structure of 19Cr14Mn0.9N High Nitrogen Steel. ISIJ International.DOI
645. Zhouhua Jiang, Hao Feng, Huabing Li, Hong‐Chun Zhu, Shucai Zhang, Bin Zhang, Yu Han, Tao Zhang, Dake Xu (2017). Relationship between Microstructure and Corrosion Behavior of Martensitic High Nitrogen Stainless Steel 30Cr15Mo1N at Different Austenitizing Temperatures. Materials.DOI
646. Hao Feng, Zhouhua Jiang, Huabing Li, Wei‐Chao Jiao, X. W. Li, Hong‐Chun Zhu, Shucai Zhang, Bin‐Bin Zhang, Minghui Cai (2017). Hot Deformation Behavior and Microstructural Evolution of High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N. steel research international.DOI
647. Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Hao Feng, Shucai Zhang, Guo-Hai Liu, Junhui Zhu, Pengbo Wang, Bin-Bin Zhang, Guangwei Fan, Guoping Li (2017). Effects of Nitrogen Segregation and Solubility on the Formation of Nitrogen Gas Pores in 21.5Cr-1.5Ni Duplex Stainless Steel. Metallurgical and Materials Transactions B.DOI
648. Dong-Ping Zhan, Guo-Xing Qiu, Yangpeng Zhang, Zhouhua Jiang, Hui-Shu Zhang (2017). Effect of AlMnMgFe Deoxidization on Microstructure and Mechanical Property of Low Carbon and Low Alloy Steel.DOI
649. Jialong Tian, Wei Wang, Wei Yan, Zhouhua Jiang, Yiyin Shan, Ke Yang (2017). Microstructure characteristics of segregation zone in 17-4PH stainless steel piston rod. Journal of Iron and Steel Research International.DOI
650. Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Junhui Zhu, Hao Feng, Shucai Zhang, Binbin Zhang, Pengbo Wang, Guohai Liu (2017). Cover Picture: steel research int. 7/2017. steel research international.DOI
651. Wanming Li, Zhouhua Jiang, Xi-min Zang, Xin Deng (2017). Modeling of flow and temperature distribution in electroslag remelting withdrawal process for fabricating large-scale slab ingots. Journal of Iron and Steel Research International.DOI
652. Yangpeng Zhang, Dongping Zhan, Xiwei Qi, Zhouhua Jiang, Huishu Zhang (2017). Microstructure and mechanical properties of Cr14 ultra-high-strength steel at different tempering temperatures around 773 K. Materials Science and Engineering A.DOI
653. Hong‐Chun Zhu, Zhouhua Jiang, Huabing Li, Junhui Zhu, Hao Feng, Shucai Zhang, Bin-Bin Zhang, Pengbo Wang, Guo-Hai Liu (2017). Effect of Solidification Pressure on Compactness Degree of 19Cr14Mn0.9N High Nitrogen Steel Using CAFE Method. steel research international.DOI
654. Bin Zhang, Zhouhua Jiang, Huabing Li, Huabing Li, Shucai Zhang, Hao Feng, Heng Li, Heng Li (2017). Precipitation behavior and phase transformation of hyper duplex stainless steel UNS S32707 at nose temperature. Materials Characterization.DOI
655. Huabing Li, Chuntian Yang, Chuntian Yang, Enze Zhou, Chunguang Yang, Chunguang Yang, Hao Feng, Zhouhua Jiang, Dake Xu, Tingyue Gu, Ke Yang (2017). Microbiologically influenced corrosion behavior of S32654 super austenitic stainless steel in the presence of marine Pseudomonas aeruginosa biofilm. Journal of Material Science and Technology.DOI
656. Huabing Li, Shou-Xing Yang, Shucai Zhang, Bin Zhang, Zhouhua Jiang, Hao Feng, Peide Han, Jizhong Li (2017). Corrigendum to “Microstructure evolution and mechanical properties of friction stir welding super-austenitic stainless steel S32654” [Mater. Des. 118 (2017) 207-217]. Materials & Design.DOI
657. Dong Hua Hou, Zhouhua Jiang, Yanwu Dong, Yang Li, Wei Gong, Fu-Bin Liu (2017). Mass Transfer Model of Desulfurization in the Electroslag Remelting Process. Metallurgical and Materials Transactions B.DOI
658. Zhouhua Jiang, Jia Yu, Fu Bin Liu, Xu Chen, Xin Geng (2017). Application of Mathematical Models for Different Electroslag Remelting Processes. High Temperature Materials and Processes.DOI
659. Huabing Li, Shou-Xing Yang, Shucai Zhang, Bin Zhang, Zhouhua Jiang, Hao Feng, Peide Han, Jizhong Li (2017). Microstructure evolution and mechanical properties of friction stir welding super-austenitic stainless steel S32654. Materials & Design.DOI
660. Dong Hua Hou, Zhouhua Jiang, Yanwu Dong, Wei Gong, Yulong Cao, Hai-bo Cao (2017). Effect of Slag Composition on the Oxidation Kinetics of Alloying Elements during Electroslag Remelting of Stainless Steel: Part-1 Mass-transfer Model. ISIJ International.DOI
661. Dong Hua Hou, Zhouhua Jiang, Yanwu Dong, Wei Gong, Yulong Cao, Hai-bo Cao (2017). Effect of Slag Composition on the Oxidation Kinetics of Alloying Elements during Electroslag Remelting of Stainless Steel: Part-2 Control of Titanium and Aluminum Content. ISIJ International.DOI
662. Jia Yu, Zhouhua Jiang, Fubin Liu, Kui Chen, Huabing Li, Xin Geng (2017). Effects of Metal Droplets on Electromagnetic Field, Fluid Flow and Temperature Field in Electroslag Remelting Process. ISIJ International.DOI
663. 徐光，姜周华，李阳，梁轶杰（2016）. 高碱度精炼渣的冶金性能研究. 《第十九届（2016年）全国炼钢学术会议大会报告及论文摘要集》.
664. 王安国，姜周华，熊云龙，唐骥，董艳武，陈瑞，豆志河，包春玲（2016）. 电渣熔铸空心环形件的热电场分析. 《铸造》.
665. 邱国兴，战东平，牛奔，周永欣，姜周华，张慧书（2016）. 脱氧工艺对钢中夹杂物的影响. 《钢铁研究学报》.
666. 战东平，邱国兴，张炎杰，牛奔，姜周华，张慧书（2016）. 不同脱氧工艺对SG45VCM钢中夹杂物的影响. 《炼钢》.
667. 张洋鹏，战东平，齐西伟，姜周华，张慧书，刘洪银，王博（2016）. 基于铝脱氧工艺的SPHC钢LF造渣离线模型. 《炼钢》.
668. 田家龙，李永灿，王威，严伟，单以银，姜周华，杨柯（2016）. 多相强化型马氏体时效不锈钢中的合金元素偏聚效应. 《金属学报》.
669. 乔岩欣，王硕，刘彬，郑玉贵，李花兵，姜周华（2016）. 新型高氮钢的腐蚀和空蚀交互作用研究. 《金属学报》.
670. 吴天海，刘春明，姜周华，范光伟（2016）. 时效处理对2205 DSS组织及力学性能的影响. 《东北大学学报(自然科学版)》.
671. 臧喜民，邓鑫，姜周华，邱天禹，李春旭（2016）. T型结晶器抽锭电渣重熔高速钢90mm方锭新工艺. 《钢铁》.
672. 臧喜民，邓鑫，李万明，姜周华，耿鑫（2016）. 抽锭电渣重熔718塑料模具钢板坯锭的新工艺. 《材料与冶金学报》.
673. 王建军，温艳慧，吴天海，李国平，姜周华，刘春明（2016）. 热输入对2205双相不锈钢MIG焊接接头组织及力学性能的影响. 《材料与冶金学报》.
674. 王建军，王杨，吴天海，李国平，姜周华，刘春明（2016）. 埋弧焊热输入对2205 DSS焊接接头组织及力学性能的影响. 《材料热处理学报》.
675. 余强，姜骁箐，姜周华（2016）. 多功能真空感应炉的开发. 《材料与冶金学报》.
676. 邱国兴，战东平，姜周华，张慧书，董大西，杨峰功（2016）. SG45VCM钢LF+VD精炼吹氮合金化研究. 《上海金属》.
677. 彭娟，姜周华，龚伟，王承，万万，庞昇（2016）. 真空感应炉冶炼高纯铁的工艺. 《材料与冶金学报》.
678. 李星，耿鑫，战东平，姜周华，彭雷朕，师帅（2016）. 圆坯凝固末端电磁搅拌电磁场的数值模拟. 《连铸》.
679. 姜周华（2016）. 电渣冶金学. 《科学出版社》.
680. Xin Geng, Hao Feng, Zhouhua Jiang, Huabing Li, Bin Zhang, Shucai Zhang, Qi Wang, Jizhong Li (2016). Microstructure, Mechanical and Corrosion Properties of Friction Stir Welding High Nitrogen Martensitic Stainless Steel 30Cr15Mo1N. Metals.DOI
681. Shucai Zhang, Zhouhua Jiang, Huabing Li, Hao Feng, Bin Zhang (2016). Detection of susceptibility to intergranular corrosion of aged super austenitic stainless steel S32654 by a modified electrochemical potentiokinetic reactivation method. Journal of Alloys and Compounds.DOI
682. Yanwu Dong, Zhouhua Jiang, Ang Yu (2016). Dissolution Behavior of Alumina-Based Inclusions in CaF2-Al2O3-CaO-MgO-SiO2 Slag Used for the Electroslag Metallurgy Process. Metals.DOI
683. Huabing Li, Wei‐Chao Jiao, Hao Feng, Zhouhua Jiang, Cui-Dong Ren (2016). Influence of Austenitizing Temperature on the Microstructure and Corrosion Resistance of 55Cr18Mo1VN High-Nitrogen Plastic Mould Steel. Acta Metallurgica Sinica (English Letters).DOI
684. Yanwu Dong, Zhouhua Jiang, Haibo Cao, Zhiwen Hou, Kean Yao (2016). Study of Single-Power, Two-Circuit ESR Process with Current-Carrying Mold: Development of the Technique and Its Physical Simulation. Metallurgical and Materials Transactions B.DOI
685. Huabing Li, Wei‐Chao Jiao, Hao Feng, Xinxu Li, Zhouhua Jiang, Guoping Li, Lixin Wang, Guangwei Fan, Peide Han (2016). Deformation Characteristic and Constitutive Modeling of 2707 Hyper Duplex Stainless Steel under Hot Compression. Metals.DOI
686. Xu Chen, Zhouhua Jiang, Fubin Liu, Jia Yu, Kui Chen (2016). Effect of Melt Rate on Surface Quality and Solidification Structure of Mn18Cr18N Hollow Ingot during Electroslag Remelting Process. steel research international.DOI
687. Dong-ping Zhan, Yangpeng Zhang, Zhouhua Jiang, De-wei Wang, Hui-shu Zhang (2016). Chromium Recycling from Argon-oxygen Decarburization Dust in Hot Metal Pre-dephosphorization Process. Journal of Iron and Steel Research International.DOI
688. D.-P. Zhan, Y.-P. Zhang, R.-J. Liu, Zhouhua Jiang, H.-S. Zhang (2016). Effect of protected electroslag remelting on cleanliness of G20CrNi2Mo bearing steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
689. Zhouhua Jiang, Hong‐Chun Zhu, Huabing Li, Yuling Li, F. B. Liu (2016). Pressurized metallurgy for high performance special steels and alloys. IOP Conference Series Materials Science and Engineering.DOI
690. Huabing Li, Enze Zhou, Yibin Ren, Dawei Zhang, Dake Xu, Chunguang Yang, Hao Feng, Zhouhua Jiang, Xiaogang Li, Tingyue Gu, Ke Yang (2016). Investigation of microbiologically influenced corrosion of high nitrogen nickel-free stainless steel by Pseudomonas aeruginosa. Corrosion Science.DOI
691. Huabing Li, Bin Zhang, Zhouhua Jiang, Shucai Zhang, Hao Feng, Peide Han, Nan Dong, Wei Zhang, Guoping Li, Guangwei Fan, Qizeng Lin (2016). A new insight into high-temperature oxidation mechanism of super-austenitic stainless steel S32654 in air. Journal of Alloys and Compounds.DOI
692. Guang Xu, Zhouhua Jiang, Yang Li (2016). Formation Mechanism of CaS-Bearing Inclusions and the Rolling Deformation in Al-Killed, Low-Alloy Steel with Ca Treatment. Metallurgical and Materials Transactions B.DOI
693. Dong‐ping Zhan, Y.-P. Zhang, Lei Tang, Kun Fan, Zhouhua Jiang, Hui‐shu Zhang (2016). Effect of Slag Prepared with Different Cooling Methods on Cleanliness of Bearing Steel GCr15.DOI
694. Xi-min Zang, Tian-yu Qiu, Wanming Li, Xin Deng, Zhouhua Jiang, Hua Song (2016). Electroslag remelting withdrawing technology for offshore jack-up platform rack steel manufacturing process. Journal of Iron and Steel Research International.DOI
695. Yulong Cao, Yanwu Dong, Zhouhua Jiang, Hai-bo Cao, Dong Hua Hou, Qian-long Feng (2016). Research on droplet formation and dripping behavior during the electroslag remelting process. International Journal of Minerals Metallurgy and Materials.DOI
696. D. Hou, Zhouhua Jiang, Yanwu Dong, Yulong Cao, Haibo Cao, W. Gong (2016). Thermodynamic design of electroslag remelting slag for high titanium and low aluminium stainless steel based on IMCT. Ironmaking & Steelmaking Processes Products and Applications.DOI
697. F. B. Liu, X. Chen, Zhouhua Jiang, Huabing Li, Xiao-qi Geng, Xin Deng, Ximin Zang (2016). Numerical simulation of solidification structure during electroslag remelting casting of ZG06Cr13Ni4Mo ingot based on CAFE and moving boundary method. Ironmaking & Steelmaking Processes Products and Applications.DOI
698. Jialong Tian, Wei Wang, Wei Yan, Zhouhua Jiang, Shan Yiyin, Ke Yang (2016). Cracking due to Cu and Ni segregation in a 17-4 PH stainless steel piston rod. Engineering Failure Analysis.DOI
699. Ming D. Ma, Hua Ding, Zhengyou Tang, Jingwei Zhao, Zhouhua Jiang, Guang-wei Fan (2016). Effects of temperature and strain rate on flow behavior and microstructural evolution of super duplex stainless steel under hot deformation. Journal of Iron and Steel Research International.DOI
700. Huabing Li, Enze Zhou, Dawei Zhang, Dake Xu, Jin Xia, Chunguang Yang, Hao Feng, Zhouhua Jiang, Xiaogang Li, Tingyue Gu, Ke Yang (2016). Microbiologically Influenced Corrosion of 2707 Hyper-Duplex Stainless Steel by Marine Pseudomonas aeruginosa Biofilm. Scientific Reports.DOI
701. Zhouhua Jiang, Dong Hua Hou, Yanwu Dong, Yulong Cao, Hai-Bo Cao, Wei Gong (2016). Effect of Slag on Titanium, Silicon, and Aluminum Contents in Superalloy During Electroslag Remelting. Metallurgical and Materials Transactions B.DOI
702. Yanwu Dong, Zhouhua Jiang, Jinxi Fan, Yulong Cao, Dong Hua Hou, Hai-Bo Cao (2016). Comprehensive Mathematical Model for Simulating Electroslag Remelting. Metallurgical and Materials Transactions B.DOI
703. Yanwu Dong, Zhouhua Jiang, Haibo Cao, Xiang Wang, Yulong Cao, Dong Hua Hou (2016). A Novel Single Power Two Circuits Electroslag Remelting with Current Carrying Mould. ISIJ International.DOI
704. 冯浩，李花兵，姜周华，朱红春，张树才，李磊（2015）. 搅拌摩擦焊接高氮奥氏体不锈钢的组织与性能研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
705. 姜周华，朱红春，李花兵，冯浩，李阳，刘福斌（2015）. 高氮不锈钢开发和应用的最新进展. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
706. 王承，龚伟，姜周华（2015）. 含镁合金的制备及在炼钢中的应用. 《材料与冶金学报》.
707. 陈旭，刘福斌，李星，景馨，姜周华（2015）. 工艺参数对电渣重熔空心钢锭凝固过程影响的数值模拟. 《材料与冶金学报》.
708. 李星，耿鑫，姜周华，李花兵，徐芳泓，王立新（2015）. 电渣重熔高温合金渣系对冶金质量的影响. 《钢铁》.
709. 王承，龚伟，姜周华，陈常勇（2015）. 稀土La在真空感应熔炼300M钢的脱氧和脱硫研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
710. 朱红春，姜周华，李花兵，刘国海，张树才，冯浩，李可斌（2015）. 压力对高氮钢宏观组织的影响规律. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
711. 姜周华，刘福斌，余强，陈旭，臧喜民，邓鑫（2015）. 电渣重熔空心钢锭技术的开发. 《钢铁》.
712. 朱红春，姜周华，李花兵，张树才，冯浩，刘福斌（2015）. 加压技术在高品质特殊钢冶炼和凝固中的作用. 《钢铁》.
713. 战东平，邱国兴，牛奔，姜周华，董大西，杨峰功，胡云生，张慧书（2015）. 氮在钢液中溶解的热力学及动力学研究. 《炼钢》.
714. 张树才，姜周华，李花兵，冯浩，张彬彬，耿鑫，范光伟，张威，林企曾（2015）. 超级奥氏体不锈钢654SMO组织与性能研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
715. 董大西，杨峰功，胡云生，张永，战东平，邱国兴，姜周华，张慧书（2015）. MnCr/CrMo钢LF底吹氮气合金化工艺研究. 《炼钢》.
716. 侯栋，董艳伍，姜周华，周伟基（2015）. 含铝钛合金电渣重熔中的渣系设计及脱氧热力学. 《东北大学学报(自然科学版)》.
717. 王瑞，张洋鹏，战东平，姜周华，薛向欣，杨亮，瞿晓刚，周伟基，张慧书（2015）. 锻造工艺对航空轴承钢G13Cr4Ni4Mo4VA棒材冲击性能的影响. 《特殊钢》.
718. 王瑞，龚伟，姜周华，薛向欣（2015）. 锻造和预备热处理对超高强度钢23Co-Ni晶粒度的影响. 《特殊钢》.
719. 李永旺，刘福斌，姜周华，李可斌，耿鑫，陈旭（2015）. 基于热力学计算对GH4169合金的成分设计. 《航空材料学报》.
720. 侯栋，董艳伍，姜周华，曹玉龙，曹海波，张新法，程中堂，王进鹏，汪祥（2015）. 1Cr21Ni5Ti不锈钢的高温氧化行为研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
721. 徐光，姜周华，李阳，胡汉涛，马志刚（2015）. X80管线钢中Ca处理氧硫化物夹杂的机理研究. 《第十届中国钢铁年会暨第六届宝钢学术年会论文集II》.
722. Yang Li, Zhou-Hua Jiang, Guang-Ling Xu, P. He, Yi-Jie Liang, Hai-Bo Cao, Cong-Lin Yao, Ya-Feng Wang, Hao Hu, Yong Fang (2015). Tin, copper and ferritic stainless steel and preparing method thereof.
723. Yang Li, Ji-peng Han, Zhouhua Jiang, Pan He (2015). Effect of tin addition on the microstructure and properties of ferritic stainless steel. International Journal of Minerals Metallurgy and Materials.DOI
724. Yanwu Dong, Zhouhua Jiang, Yulong Cao, Dong Hua Hou, Lian-ke Liang, Jichao Duan (2015). Effective Thermal Conductivity of Slag Crust for ESR Slag. ISIJ International.DOI
725. Hong‐Chun Zhu, Huabing Li, S. C. Zhang, Kuizhong Li, G. H. Liu, Zhouhua Jiang, X. Geng, Peide Han (2015). Numerical simulation of Mo macrosegregation during ingot casting of high-Mo austenitic stainless steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
726. Zhouhua Jiang, Yulong Cao, Yanwu Dong, Dong Hua Hou, Haibo Cao, Jinxi Fan (2015). Numerical Simulation of the Electroslag Casting With Liquid Metal for Producing Composite Roll. steel research international.DOI
727. Min Ma, Hua Ding, Zijian Tang, Jingwei Zhao, Zhouhua Jiang, Guiru Li (2015). Effect of strain rate and temperature on hot workability and flow behaviour of duplex stainless steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
728. Huabing Li, Zhouhua Jiang, Hao Feng, S.C. Zhang, L. Li, Peide Han, R.D.K. Misra, J.Z. Li (2015). Microstructure, mechanical and corrosion properties of friction stir welded high nitrogen nickel-free austenitic stainless steel. Materials & Design.DOI
729. Huabing Li, Zhouhua Jiang, Hao Feng, Shucai Zhang, Peide Han, Wei Zhang, Guoping Li, Guangwei Fan (2015). Effect of Temperature on the Corrosion Behaviour of Super Austenitic Stainless Steel S32654 in Polluted Phosphoric Acid. International Journal of Electrochemical Science.DOI
730. Hao Feng, Huabing Li, Shucai Zhang, Qi Wang, Zhouhua Jiang, Guoping Li, Wei Zhang, Guangwei Fan (2015). Corrosion Behavior of Super Duplex Stainless Steel S32750 in White Liquor. International Journal of Electrochemical Science.DOI
731. Zhouhua Jiang, Chengen Wang, W. Gong, Huang-Ping WANG (2015). Evolution of inclusions and change of as-cast microstructure with Mg addition in high carbon and high chromium die steel. Ironmaking & Steelmaking Processes Products and Applications.DOI
732. X. Geng, Xiaolang Li, F. B. Liu, Huabing Li, Zhouhua Jiang (2015). Optimisation of electromagnetic field and flow field in round billet continuous casting mould with electromagnetic stirring. Ironmaking & Steelmaking Processes Products and Applications.DOI
733. Xu Chen, Fubin Liu, Zhouhua Jiang, Huabing Li, Xi-min Zang, Xin Deng (2015). Mathematical Modeling of ESR Process for Hollow Ingot with Current Supplying Mould. Journal of Iron and Steel Research International.DOI
734. Huabing Li, Zhouhua Jiang, Hao Feng, Qi Wang, Wei Zhang, Guangwei Fan, Guoping Li, Leiying Wang (2015). Electrochemical Corrosion Characteristics of Super Duplex Stainless Steel S32750 in LT-MED Environment. International Journal of Electrochemical Science.DOI
735. 韩纪鹏，姜周华（2014）. 含锡铁素体不锈钢夹杂物的冶金行为. 《东北大学学报(自然科学版)》.
736. 李丰功，张慧书，战东平，邱国兴，罗志国，姜周华（2014）. 80t LF钢包底吹氩行为的数值模拟. 《钢铁研究》.
737. 段吉超，董艳伍，姜周华，赵海明（2014）. 工艺参数对电渣重熔过程影响的数值模拟研究. 《江西冶金》.
738. Yanwu Dong, Zhouhua Jiang, Yulong Cao, Hongkui Zhang, Shen Hai-jun (2014). Effect of MgO and SiO2 on surface tension of fluoride containing slag. Journal of Central South University.DOI
739. Yanwu Dong, Zhouhua Jiang, Yulong Cao, Ang Yu, Dong Hua Hou (2014). Effect of Slag on Inclusions During Electroslag Remelting Process of Die Steel. Metallurgical and Materials Transactions B.DOI
740. Hui Shu Zhang, Dong Ping Zhan, Bi Tao Deng, Lijun Wang, Zhouhua Jiang (2014). Numerical Simulation of Air Gap Formation in Water-Cooled Mold Casting. Advanced materials research.DOI
741. 龚伟，战东平，姜周华，宋满堂，钟晓丹（2013）. 转炉流程生产高品质轴承钢的实践. 《中国冶金》.
742. 段吉超，陈旭，刘福斌，姜周华（2013）. 电渣重熔35CrMo空心钢锭的内部质量研究. 《材料与冶金学报》.
743. 景馨，姜周华，刘福斌，陈旭，段吉超（2013）. 导电结晶器电渣重熔空心钢锭电场和温度场的数值模拟. 《材料与冶金学报》.
744. 邓鑫，姜周华，臧喜民，董艳伍（2013）. 连铸式液态电渣浇注圆锭表面质量的影响因素. 《材料与冶金学报》.
745. 赵鸿燕，冯浩，李花兵，姜周华，朱红春，张树才（2013）. 渣系对Ar气保护电渣重熔Ni-Cr-Co基高温合金质量的影响. 《材料与冶金学报》.
746. 冯浩，李花兵，姜周华，董艳伍，陈瑞，宋照伟，刘福斌，耿鑫（2013）. 电渣熔铸低碳马氏体不锈钢内部质量研究. 《材料与冶金学报》.
747. 冯浩，刘福斌，李花兵，姜周华，董艳伍，陈瑞，宋照伟，耿鑫（2013）. 电渣熔铸ZG06Cr13Ni4Mo低碳马氏体不锈钢力学性能研究. 《材料与冶金学报》.
748. 李丰功，战东平，张佩灿，姜周华，王博，张思勋，韩文习（2013）. 脱氧合金化工艺对高铝钢中夹杂物的影响. 《中国冶金》.
749. 姜周华，Lev Medovar，Ganna Stovpchenko，董艳伍，臧喜民，刘福斌（2013）. 第二代液态电渣冶金技术的发展. 《钢铁研究学报》.
750. Huabing Li, Zhouhua Jiang, Hao Feng, Hong‐Chun Zhu, Zu-rui Zhang (2013). Influence of chemical composition and cold deformation on aging precipitation behavior of high nitrogen austenitic stainless steels. Journal of Central South University.DOI
751. Wei Gong, Cheng Wang, Haidong Wang, Zhouhua Jiang (2013). Influence of Mg on Thermoplasticity of High-Temperature Stainless Bearing Steel Cr14Mo4. Journal of Material Science and Technology.DOI
752. Xu Chen, Zhouhua Jiang, L.B. Medovar, Fubin Liu, Ganna Stovpchenko, Borys Fedorovskii, Vitalii Lebid, Ximin Zang, Xin Deng (2013). Hot Test and Simulation of ESR Hollow Ingots Formation in Current Supplying Mould with Electrodes Change.DOI
753. Ximin Zang, Zhouhua Jiang, Hua Song, Fubin Liu, Xin Deng, Xu Chen, Chong Han (2013). A Study of Slag and Steel Leakage Influence Factors during Electroslag Remelting Withdrawing Process.DOI
754. Zu Rui Zhang, Zhen Ye Zhao, Chun Zhi Li, Zhouhua Jiang, Huabing Li (2013). Effects of Aging Precipitates on the Mechanical and Corrosion Resistance Properties of 18Cr-18Mn-2Mo-0.96N Super High Nitrogen Austenitic Stainless Steel. Applied Mechanics and Materials.DOI
755. Huabing Li, Zhouhua Jiang, Hao Feng, Hong‐Chun Zhu, Binhan Sun, Zhen Li (2013). Corrosion behavior of ferritic stainless steel with 15wt% chromium for the automobile exhaust system. International Journal of Minerals Metallurgy and Materials.DOI
756. Yanwu Dong, Zhouhua Jiang, L.B. Medovar, Ganna Stovpchenko, Xinfa Zhang, Ximin Zang, Xin Deng (2013). Temperature Distribution of Electroslag Casting with Liquid Metal Using Current Conductive Ring. steel research international.DOI
757. Zhouhua Jiang, Ying Zhuang, Yang Li, Shuang-jiang Li (2013). Effect of Modification Treatment on Inclusions in 430 Stainless Steel by Mg-Al Alloys. Journal of Iron and Steel Research International.DOI
758. Xin Geng, Zhouhua Jiang, Huabing Li, Fubin Liu, Xing Li (2013). Production of High Quality Die Steels from Large ESR Slab Ingots. Springer eBooks.DOI
759. Yanwu Dong, Zhouhua Jiang, Yulong Cao, Jinxi Fan, Ang Yu, Fubin Liu (2013). Effect of Fluoride Containning Slag on Oxide Inclusions in Electroslag Ingot. Springer eBooks.DOI
760. Fubin Liu, Huabing Li, Zhouhua Jiang, Yanwu Dong, Xu Chen, Xin Geng, Ximin Zang (2013). Mathematical Model of Solidification During Electroslag Casting of Pilger Roll. Springer eBooks.DOI
761. Xin Deng, Zhouhua Jiang, Ximin Zang (2013). Factors Affecting Surface Quality of Ingot Produced by Electroslag Continuous Casting with Liquid Metal. Springer eBooks.DOI
762. 董艳伍，姜周华，李花兵，邵国强，于昂，陈瑞，宋照伟（2012）. 电渣冶金用含氟渣系电导率计算方法. 《材料与冶金学报》.
763. Huabing Li, Zhouhua Jiang, Hao Feng, Qi-feng Ma, Dong-ping Zhan (2012). Aging Precipitation Behavior of 18Cr-16Mn-2Mo-1. 1N High Nitrogen Austenitic Stainless Steel and Its Influences on Mechanical Properties. Journal of Iron and Steel Research International.DOI
764. Li Chun Zheng, Yan Wu Dong, Zhouhua Jiang, Wan Ming Li (2012). Mathematical simulation of the electroslag casting of hollow ingot with liquid metal. Journal of Northeastern University.
765. Fubin Liu, Xi-min Zang, Zhouhua Jiang, Xin Geng, Man Yao (2012). Comprehensive model for a slag bath in electroslag remelting process with a current-conductive mould. International Journal of Minerals Metallurgy and Materials.DOI
766. Jianbin Chen, Qi-zhong Chen, Zhaoping Chen, Zhouhua Jiang, Zongze Huang, Jiaqi Pan (2012). Kinetics of nitrogen absorption in molten aisi 316 stainless steel during immersion nitrogen blowing. Metals and Materials International.DOI
767. Yanwu Dong, Zhouhua Jiang, Hui Liu, Rui Chen, Zhaowei Song (2012). Simulation of Multi-electrode ESR Process for Manufacturing Large Ingot. ISIJ International.DOI
768. 耿鑫，姜周华（2011）. 电渣重熔大型板坯的质量控制. 《材料与冶金学报》.
769. 李万明，姜周华，董艳伍，刘辉，郑立春（2011）. 复合轧辊界面理论研究的现状. 《材料与冶金学报》.
770. 姜周华，董艳伍，臧喜民，耿鑫，李花兵，余强（2011）. 新一代电渣冶金技术的开发. 《材料与冶金学报》.
771. 姜周华，李明，李阳，陈唐平，陈兆平，黄宗泽（2011）. 439不锈钢液的硅铝合金复合脱氧行为研究. 2011 AASRI Conference on Artificial Intelligence and Industry Application (AASRI-AIIA 2011).
772. 董艳伍，姜周华，肖志新，李正邦（2011）. 电渣冶金用渣料的水化性能研究. Proceedings of 2011 International Conference on Fuzzy Systems and Neural Computing(FSNC 2011 V7).
773. 姜周华，董艳伍，李花兵（2011）. 特殊钢特种冶金技术的新发展. 《2011年全国高品质特殊钢生产技术研讨会文集》.
774. 邓鑫，余强，姜周华，董艳伍（2011）. 电渣炉固渣启动过程模糊控制器的开发与应用. 《材料与冶金学报》.
775. 余强，董艳伍，姜周华（2011）. 双工位保护气氛熔速控制电渣重熔炉的开发. 《材料与冶金学报》.
776. 董艳伍，姜周华，赵海明，张新法，李正邦（2011）. 电渣重熔大型钢锭的数值模拟. 《材料与冶金学报》.
777. 贾建平，张英杰，董艳伍，姜周华（2011）. 电渣重熔冷轧辊坯的质量控制. 《材料与冶金学报》.
778. 臧喜民，姜周华，Lev Medovar，姜海龙（2011）. 空心管坯电渣重熔技术. 《材料与冶金学报》.
779. Yanwu Dong, Zhouhua Jiang, Lian-ke Liang, LI Zheng-bang (2011). Hydrogen permeability of slags containing calcium fluoride. Journal of Central South University of Technology.DOI
780. Zhouhua Jiang, Yanwu Dong, Lian-ke Liang, LI Zheng-bang (2011). Hydrogen Pick-Up During Electroslag Remelting Process. Journal of Iron and Steel Research International.DOI
781. Zhouhua Jiang, Shuang-jiang Li, Yang Li (2011). Thermodynamic Calculation of Inclusion Formation in Mg-Al-Si-O System of 430 Stainless Steel Melts. Journal of Iron and Steel Research International.DOI
782. Zhouhua Jiang (2011). Two positions protective gas with melt rate control ESR furnace. Cailiao yu yejin xuebao.
783. Zhouhua Jiang (2011). Quality control of large slab ingot by ESR. Cailiao yu yejin xuebao.
784. 李双江，姜周华，李阳，梁连科（2010）. 430不锈钢尖晶石夹杂物控制的热力学分析. 《钢铁研究》.
785. 张慧书，战东平，姜周华（2010）. 应用改进BP神经网络的铁水预脱硫过程镁耗量预报模型. 《全国冶金自动化信息网2010年年会》.
786. 李双江，姜周华，黄宗泽，李阳，李明（2010）. 精炼渣碱度对304不锈钢夹杂物的影响. 《钢铁》.
787. 战东平，张慧书，姜周华（2010）. 铁水预脱硫过程镁粉耗量预报模型. 《中国冶金》.
788. 李双江，李阳，姜周华，李伟坚（2010）. 304奥氏体不锈钢夹杂物的冶金行为. 《东北大学学报(自然科学版)》.
789. 刘福斌，臧喜民，姜周华，耿鑫（2010）. 导电结晶器电渣重熔中非金属夹杂物的去除. 《中国冶金》.
790. Zhouhua Jiang, Zu-rui Zhang, Huabing Li, Zhen Li, Qi-feng Ma (2010). Microstructural evolution and mechanical properties of aging high nitrogen austenitic stainless steels. International Journal of Minerals Metallurgy and Materials.DOI
791. Yanwu Dong, Zhouhua Jiang, Zhi-xin Xiao, LI Zheng-bang (2010). Calcination of Slags for Electroslag Remelting. Journal of Iron and Steel Research International.DOI
792. Wei Wang, Yan Wei, Ke Yang, Yiyin Shan, Zhouhua Jiang (2010). Temperature Dependence of Tensile Behaviors of Nitrogen-Alloyed Austenitic Stainless Steels. Journal of Materials Engineering and Performance.DOI
793. Zhouhua Jiang (2010). Prediction Model of Magnesium Powder Consumption During Hot Metal Pre-Desulfurization. China Metallurgy.
794. 耿鑫，姜周华，刘福斌，梁连科（2009）. 电渣重熔过程中夹杂物的控制. 《钢铁》.
795. 刘福斌，臧喜民，姜周华，耿鑫（2009）. 电渣连铸锭表面质量的影响因素. 《特殊钢》.
796. 刘勇，龙川江，战东平，张慧书，姜周华（2009）. 铁水包喷吹Mg+CaO粉剂脱硫技术. 《炼钢》.
797. 沈春飞，蒋兴元，李阳，龚伟，姜周华（2009）. Mg处理钢生成细小尖晶石夹杂物的研究. 《炼钢》.
798. 李双江，姜周华，李阳，李伟坚（2009）. 硅脱氧对304不锈钢夹杂物的影响. 《第七届(2009)中国钢铁年会论文集（上）》.
799. 董大西，杨锋功，刘勇，孙玉春，巩飞，战东平，姜周华（2009）. 60t LD-LF-VD-CC工艺生产低氧GCr15轴承钢. 《第七届(2009)中国钢铁年会论文集（上）》.
800. 李伟坚，姜周华，李阳，李双江（2009）. 复合脱氧剂对430不锈钢脱氧行为的研究. 《中国金属学会特钢分会，特钢冶炼学术委员会2009年会论文集》.
801. 龚伟，姜周华，潘丽梅，唐东（2009）. LF精炼过程电极消耗模型. 《钢铁》.
802. 耿鑫，姜周华，刘福斌，梁连科（2009）. 电渣重熔过程中氧含量的控制. 《材料与冶金学报》.
803. 龚伟，姜周华，战东平（2009）. 喷吹镁粉和石灰粉铁水脱硫的统计模型研究. 《钢铁》.
804. 董艳伍，姜周华，李正邦（2009）. 具有发展潜力的电渣冶金技术. 《中国冶金》.
805. 姜周华，李正邦（2009）. 电渣冶金技术的最新发展趋势. 《特殊钢》.
806. Huabing Li, Zhouhua Jiang, Zu-rui Zhang, Yang Cao, Yan Hua Yang (2009). Intergranular corrosion behavior of high nitrogen austenitic stainless steel. International Journal of Minerals Metallurgy and Materials.DOI
807. Huabing Li, Zhouhua Jiang, Yan Hua Yang, Yang Cao, Zu-rui Zhang (2009). Pitting corrosion and crevice corrosion behaviors of high nitrogen austenitic stainless steels. International Journal of Minerals Metallurgy and Materials.DOI
808. Huabing Li, Zhouhua Jiang, Yang Cao, Zu-rui Zhang (2009). Fabrication of high nitrogen austenitic stainless steels with excellent mechanical and pitting corrosion properties. International Journal of Minerals Metallurgy and Materials.DOI
809. Yao Fu, Xinqiang Wu, En–Hou Han, Wei Ke, Ke Yang, Zhouhua Jiang (2009). Effects of nitrogen on the passivation of nickel-free high nitrogen and manganese stainless steels in acidic chloride solutions. Electrochimica Acta.DOI
810. Huabing Li, Zhouhua Jiang, Zu-rui Zhang, Yan Hua Yang (2009). Effect of Grain Size on Mechanical Properties of Nickel-Free High Nitrogen Austenitic Stainless Steel. Journal of Iron and Steel Research International.DOI
811. Yanwu Dong, Zhouhua Jiang, LI Zheng-bang (2009). Segregation of Niobium During Electroslag Remelting Process. Journal of Iron and Steel Research International.DOI
812. Zhouhua Jiang (2009). Preparation and Characterization of Ultra-fine MgO·Al_2O_3 Spinel Powder. Guocheng gongcheng xuebao.
813. 徐芳泓，李亮，姜周华（2008）. 太钢二炼钢结晶器液面波动的水模拟研究. 《炼钢》.
814. 耿鑫，姜周华，刘福斌（2008）. 电渣重熔过程中氢含量的控制. 《钢铁》.
815. 刘福斌，姜周华，耿鑫（2008）. 电渣炉大电流导体的电磁场数值模拟. 《钢铁》.
816. 吴令，姜周华，龚伟，赵国光，左康林（2008）. 通过炉气分析实现转炉连续控制. 《炼钢》.
817. 战东平，张慧书，龚伟，姜周华，宋景欣（2008）. 电磁制动对钢中非金属夹杂物的影响. 《第四届发展中国家连铸国际会议论文集》.
818. 李花兵，姜周华，张祖瑞，许宝玉（2008）. 氮在Fe-Cr-Mn合金体系中的溶解度计算模型. 《东北大学学报(自然科学版)》.
819. 吴令，姜周华，龚伟，梁连科（2008）. 遗传神经网络改进正规溶液模型及其在二元渣系中的应用. 《金属学报》.
820. 陈兆平，战东平，张戈，张慧书，沈海军，姜周华（2008）. LF电极孔喷吹含氢气体对钢中碳的影响. 《2008年全国冶金物理化学学术会议专辑（下册）》.
821. 吴令，姜周华，龚伟（2008）. 转炉出钢合成渣混冲脱硫的研究. 《钢铁研究》.
822. Yao Fu, Xinqiang Wu, En–Hou Han, Wei Ke, Ke Yang, Zhouhua Jiang (2008). Effects of cold work and sensitization treatment on the corrosion resistance of high nitrogen stainless steel in chloride solutions. Electrochimica Acta.DOI
823. Xinqiang Wu, Yao Fu, Junbo Huang, En–Hou Han, Wei Ke, Ke Yang, Zhouhua Jiang (2008). Investigation on Pitting Corrosion of Nickel-Free and Manganese-Alloyed High-Nitrogen Stainless Steels. Journal of Materials Engineering and Performance.DOI
824. X. Q. Wu, Shugen Xu, Jiamiao Huang, En–Hou Han, Wei Ke, Ke Yang, Zhouhua Jiang (2008). Uniform corrosion and intergranular corrosion behavior of nickel‐free and manganese alloyed high nitrogen stainless steels. Materials and Corrosion.DOI
825. Yang Li, Zhouhua Jiang, Yang Liu (2008). Strengthening mechanism of steels treated by barium-bearing alloys. International Journal of Minerals Metallurgy and Materials.DOI
826. Dong-ping Zhan, Hui-shu Zhang, Zhouhua Jiang (2008). Effects of AlMnCa and AlMnFe Alloys on Deoxidization of Low Carbon and Low Silicon Aluminum Killed Steels. Journal of Iron and Steel Research International.DOI
827. Yao Fu, Xinqiang Wu, En–Hou Han, Wei Ke, Ke Yang, Zhouhua Jiang (2008). Influence of Cold Work on Pitting Corrosion Behavior of a High Nitrogen Stainless Steel. Journal of The Electrochemical Society.DOI
828. 臧喜民，姜周华，潘铁毅（2007）. 电渣连铸小方坯内部质量研究. 《2007中国钢铁年会论文集》.
829. 龚伟，姜周华，王继晨，王继伟（2007）. 石油钻杆接头用钢37CrMnMo夹杂物控制. 《2007中国钢铁年会》.
830. 战东平，张慧书，姜周华，龚伟，宋景欣，程乃良，郭振和，邹俊苏（2007）. 连铸结晶器电磁制动对铸坯中非金属夹杂物影响的研究. 《铸造技术》.
831. 戴年建，姜周华，李阳，刘杨，梁连科（2007）. Si-Al、Si-Ba和Al-Ba二元合金熔体组元活度的计算. 《钢铁研究学报》.
832. 战东平，姜周华，耿鑫（2007）. 预熔渣对RH用镁铬砖的侵蚀行为. 《2007中国钢铁年会》.
833. 李阳，姜周华，袁伟霞，易卫东（2007）. Mg处理轴承钢的理论计算与工业试验. 《2007中国钢铁年会》.
834. 董艳伍，姜周华，李正邦（2007）. 电渣重熔Inconel718合金的偏析研究. 《2007中国钢铁年会》.
835. 沈春飞，蒋兴元，尹世友，姜周华，李阳（2007）. AOD冶炼304不锈钢渗氮、脱氮计算模型的建立与应用. 《2007中国钢铁年会》.
836. 李阳，姜周华，刘杨（2007）. Si-Ca-Ba三元合金熔体热力学性质的计算. 《东北大学学报(自然科学版)》.
837. 张慧书，战东平，姜周华（2007）. 基于改进BP神经网络的铁水预处理终点硫含量预报模型. 《钢铁》.
838. 尹世友，姜周华，李阳，梁连科，沈春飞，蒋兴元（2007）. 奥氏体不锈钢熔体氮溶解行为的研究. 《中国冶金》.
839. 曹阳，姜周华，李花兵，李万明，许宝玉（2007）. 高氮不锈钢粉末冶金制备技术的研究进展. 《中国冶金》.
840. 姜周华，唐东，李花兵，顾文斌，刘晓，王军文（2007）. LF炉运行电抗模型及供电优化. 《中国冶金》.
841. Huabing Li, Zhouhua Jiang, Zu-rui Zhang, B. Y. Xu, Fubin Liu (2007). Mechanical Properties of Nickel Free High Nitrogen Austenitic Stainless Steels. Journal of Iron and Steel Research International.DOI
842. Yanwu Dong, Zhouhua Jiang, LI Zheng-bang (2007). Mathematical Model for Electroslag Remelting Process. Journal of Iron and Steel Research International.DOI
843. Huabing Li, Zhouhua Jiang, Zu-rui Zhang, B. Y. Xu (2007). Research on Fracture Behavior of High Nitrogen Austenitic Stainless Steels at Cryogenic Temperature. Journal of Iron and Steel Research International.DOI
844. Ximin Zang, Zhouhua Jiang, Tieyi Pan (2007). Development and investigation of electroslag continuous casting. International Journal of Minerals Metallurgy and Materials.DOI
845. Xiang-mi You, Zhouhua Jiang, Huabing Li (2007). Ultra-Pure Ferritic Stainless Steels—Grade Refining Operation and Application. Journal of Iron and Steel Research International.DOI
846. Huabing Li, Zhouhua Jiang, Ming-hui Shen, Xiang-mi You (2007). High Nitrogen Austenitic Stainless Steels Manufactured by Nitrogen Gas Alloying and Adding Nitrided Ferroalloys. Journal of Iron and Steel Research International.DOI
847. Zhouhua Jiang (2007). Final Sulfur Content Prediction Model Based on Improved BP Artificial Neural Network for Hot Metal Pretreatment. Ironmaking & Steelmaking Processes Products and Applications.
848. Zhouhua Jiang (2007). Thermodynamic Calculation Model of Nitrogen Solubility in Molten Stainless Steel. Journal of Northeastern University.
849. Zhouhua Jiang (2007). Application of Improved BP Neural Network to Final Sulfur Content Prediction of Hot Metal Pre-desulfurization. Journal of Northeastern University.
850. 臧喜民，姜周华，张天彪，王湘平（2006）. 电渣连铸技术的开发. 《中国冶金》.
851. 战东平，张慧书，李术川，姜周华（2006）. AlMnCa合金脱氧和非金属夹杂物控制技术. 《东北大学学报(自然科学版)》.
852. 龚伟，姜周华，战东平，王文忠，邢国成（2006）. 消除合金结构钢连铸过程中夹渣的研究. 《钢铁》.
853. 孙丽娜，吴国玺，龚伟，姜周华（2006）. 用含钡合金进行钢水脱氧的工业试验研究. 《钢铁研究学报》.
854. 姜周华，李花兵，董艳伍，李阳，曹阳（2006）. 电渣重熔高氮钢技术的进展. 《钢铁研究学报》.
855. 李阳，姜周华，刘杨，李花兵，梁连科（2006）. 用含钡合金对不锈钢脱氧、脱硫和还原脱磷. 《钢铁研究学报》.
856. 王博，姜周华，姜茂发（2006）. 镁铝合金处理GCr15轴承钢夹杂物的变质. 《中国有色金属学报》.
857. 姜周华，李阳（2006）. 洁净不锈钢冶炼技术. 《2006年全国炼钢、连铸生产技术会议文集》.
858. 战东平，张慧书，耿鑫，姜周华，许家彦，宋满堂（2006）. 超低硫X65管线钢中非金属夹杂物研究. 《铸造技术》.
859. 姜周华，董艳伍，贾建平，史梦健，余强，孙国会（2006）. 电渣重熔大型冷轧辊用钢的工艺研究. 《中国冶金》.
860. 余强，孙国会，姜周华，李花兵，姜利（2006）. 电渣炉智能控制系统的开发与应用. 《中国冶金》.
861. 游香米，姜周华，李花兵，申明辉，曹阳（2006）. 超纯铁素体不锈钢的开发与应用现状. 《中国冶金》.
862. 李花兵，姜周华，申明辉，游香米，曹阳（2006）. 氮气加压熔炼高氮钢技术的研究进展. 《中国冶金》.
863. 战东平，张慧书，姜周华（2006）. 含钙钡合金脱氧和非金属夹杂物控制技术研究. 《中国冶金》.
864. 李阳，姜周华，袁伟霞，易卫东（2006）. 精炼渣对非铝脱氧钢中夹杂物影响的实验研究. 《中国冶金》.
865. 战东平，宋景欣，姜周华，龚伟，程乃良，郭振和，邹俊苏（2006）. 连铸结晶器电磁制动的使用效果分析. 《中国冶金》.
866. 李阳，姜周华，刘杨，王洪兴（2006）. 炼钢用Si-Ca-Ba复合脱氧剂成分优化的研究. 《中国冶金》.
867. 龚伟，徐建平，姜周华，王文忠（2006）. 转炉吹炼温度预报人工神经网络模型的开发. 《材料与冶金学报》.
868. 于鹏，战东平，姜周华，李大量，尹小东，马志刚（2006）. LF精炼终点成分预报模型开发. 《材料与冶金学报》.
869. 臧喜民，黄晓颖，姜周华，龚伟，梁连科（2006）. 电渣连铸小方坯表面质量的影响因素. 《特殊钢》.
870. Dong‐Ping Zhan, Zhouhua Jiang, Wenzhong Wang (2006). Development of Deep Desulfurization Technology with Premelted Slag during RH‐KTB Refining. Developments in Chemical Engineering and Mineral Processing.DOI
871. Zhouhua Jiang, Wei Gong, Wenzhong Wang (2006). A Mathematical Model of the Decarburization in UHP Electric Arc Furnace Charged with Hot Metal. Developments in Chemical Engineering and Mineral Processing.DOI
872. Zhouhua Jiang (2006). Steel Deoxidation and Non-metallic Inclusion Control Using AlMnCa Alloy. Journal of Northeastern University.
873. Zhouhua Jiang (2006). Research on Ca and/or Ba Alloy Deoxidation and Non-metallic Inclusion Controlling Technology. China Metallurgy.
874. Yang Li, Zhouhua Jiang, Yang Liu (2006). Effect of Refining Slag Composition on Inclusions in Molten Steel treated by Barium‐bearing Alloy. Developments in Chemical Engineering and Mineral Processing.DOI
875. 吕俊杰，姜周华，李阳，刘杨（2005）. 钡系复合合金对钢液脱氧行为的研究. 《冶金研究中心2005年“冶金工程科学论坛”》.
876. 战东平，姜周华，罗建江，阎文龙（2005）. RH-KTB预熔渣深脱硫实践. 《钢铁》.
877. 王厚昕，李阳，李正邦，姜周华，张家雯，梁连科（2005）. 焊丝钢新型脱氧剂的实验研究. 《钢铁》.
878. 姜周华，刘杨，李阳，梁连科（2005）. Si-Ca,Si-Ba及Ca-Ba二元合金熔体组元活度的计算. 《东北大学学报(自然科学版)》.
879. 战东平，李术川，姜周华，朴峰云，毕洪志，于喜民，曲孝忠（2005）. AlMnca合金脱氧技术研究. 《2005中国钢铁年会论文集（第3卷）》.
880. 陈兆平，姜周华，黄宗泽（2005）. 奥氏体不锈钢熔体中氮含量的计算和测定. 《2005中国钢铁年会论文集（第3卷）》.
881. 姜周华，李阳，刘杨（2005）. 钡处理钢的微观组织和机械性能研究. 《2005中国钢铁年会论文集（第3卷）》.
882. 李阳，姜周华，刘杨（2005）. Si-Ca-Ba合金成分优化实验研究. 《2005中国钢铁年会论文集（第3卷）》.
883. 陈建斌，陈兆平，姜周华，黄宗泽（2005）. 不锈钢AOD转炉过程数学模拟Ⅰ:过程数学模型. 《2005中国钢铁年会论文集（第3卷）》.
884. 陈兆平，陈建斌，黄宗泽，姜周华（2005）. 不锈钢AOD转炉过程数学模拟Ⅱ:宝钢120tAOD转炉中的应用. 《2005中国钢铁年会论文集（第3卷）》.
885. 姜周华，陈兆平，黄宗泽（2005）. 不锈钢冶炼及凝固过程氮的控制. 《钢铁》.
886. 刘杨，姜周华，李阳，戴年建，梁连科（2005）. 含钡二元合金熔体热力学性质的计算. 《钢铁研究学报》.
887. 王安娜，田慧欣，姜周华，战东平，尹小东，马志刚（2005）. 基于信息融合算法的LF炉钢水温度预测. 《钢铁研究学报》.
888. 黄晓颖，姜周华，李花兵，武拥军，梁连科（2005）. 含铬铁水氧化脱磷的研究. 《铁合金》.
889. 宋景欣，程乃良，郭振和，邹俊苏，战东平，龚伟，姜周华（2005）. 梅钢连铸结晶器电磁制动技术使用效果. 《第八届全国冶金工艺理论学术会议论文专辑》.
890. 王继晨，王继伟，杨广前，龚伟，姜周华（2005）. 37CrMnMo钢冶炼过程夹杂物控制工艺. 《材料与冶金学报》.
891. Zhouhua Jiang, Huabing Li, Zhaoping Chen, Zongze Huang, Deling Zou, Lian-ke Liang (2005). The Nitrogen Solubility in Molten Stainless Steel. steel research international.DOI
892. Zhouhua Jiang (2005). Control of Molten Steel Temperature during Ladle Furnace Refining. Industrial heating.
893. 刘润藻，战东平，姜周华，姜茂发（2004）. LF精炼用发泡剂的发泡效果. 《材料与冶金学报》.
894. 黄宗泽，陈兆平，姜周华，梁连科（2004）. AOD前期含铬铁水去磷保铬的热力学分析. 《2004年全国冶金物理化学学术会议》.
895. 吕俊杰，姜周华，李阳，刘杨（2004）. 钡系复合合金对钢液脱氧行为的试验研究. 《钢铁》.
896. 陈兆平，姜周华，黄宗泽，邹德玲，梁连科（2004）. 奥氏体不锈钢中氮的溶解行为. 《2004年全国冶金物理化学学术会议》.
897. 王厚昕，姜周华，李阳，梁连科，王军文，顾文兵（2004）. 喂SiCaBa包芯线对钢中夹杂物变性的影响. 《钢铁研究学报》.
898. 耿鑫，战东平，姜周华（2004）. 预熔精炼渣组成对RH用镁铬砖侵蚀的影响. 《材料与冶金学报》.
899. 曾鸣，姜周华，董艳伍（2004）. 软计算及其在钢铁冶金工业中的应用. 《材料与冶金学报》.
900. 王博，姜周华，龚伟，战东平，李大亮（2004）. GCr15轴承钢夹杂物及全氧含量控制工艺分析. 《材料与冶金学报》.
901. 邹德玲，姜周华，陈兆平，李花兵，梁连科（2004）. 304不锈钢熔体氮溶解度的测定. 《材料与冶金学报》.DOI
902. 李花兵，姜周华，邹德玲，黄晓颖，梁连科（2004）. 用添加Ba、Mg的SiCaAlFe合金对不锈钢还原脱磷的研究. 《材料与冶金学报》.
903. Lianfu Li, Zhouhua Jiang, Y. Riquier (2004). High-temperature oxidation of duplex stainless steels in air and mixed gas of air and CH4. Corrosion Science.DOI
904. Zhouhua Jiang (2004). Effect of slag composition on the corrosion of MgO-Cr_2O_3 refractory used for RH lining. Cailiao yu yejin xuebao.
905. 董艳伍，姜周华，龚伟（2003）. 20CrNiMoH齿轮钢中夹杂物的来源分析. 《材料与冶金学报》.
906. 王军文，顾文兵，李阳，姜周华（2003）. 含Ca、Ba合金和Al基合金的复合脱氧实验研究. 《宝钢技术》.
907. 邢国成，孙立国，薛井恒，李刚，程士富，贾光霖，龚伟，姜周华（2003）. 消除合金结构钢连铸坯夹渣的研究. 《中国金属学会2003中国钢铁年会论文集（3）》.
908. 战东平，姜周华，王文忠（2003）. 超低硫钢冶炼过程钢包渣改质剂的作用研究. 《中国金属学会2003中国钢铁年会论文集（3）》.
909. 姜周华，李阳，姜茂发，袁伟霞，易卫东（2003）. 精炼渣成分对钢中夹杂物影响的实验研究. 《中国金属学会2003中国钢铁年会论文集（3）》.
910. 程乃良，邹俊苏，姜周华，阎立懿（2003）. 梅钢150t钢包精炼炉电热特性分析与应用. 《中国金属学会2003中国钢铁年会论文集（3）》.
911. 李阳，姜周华，王厚昕，梁连科，王军文，顾文兵（2003）. 喂SiCaBa包芯线对钢中夹杂物变性的实验研究. 《中国金属学会2003中国钢铁年会论文集（3）》.
912. 李阳，姜周华，姜茂发，梁连科，王厚昕，王军文，顾文兵（2003）. 含钡合金在钢液中的脱氧行为研究. 《炼钢》.
913. 战东平，姜周华，梁连科，孙中强，王文忠，顾文兵，王军文，汪铖强（2003）. 150 t EAF-LF预熔精炼渣脱硫试验研究. 《炼钢》.
914. 王厚昕，姜周华，李阳，梁连科，王军文，顾文兵（2003）. 含钡合金对硬线钢的脱氧试验. 《特殊钢》.
915. 李阳，姜周华，梁连科（2003）. 含钡合金的生产及其对钢液脱氧行为的研究. 《铁合金》.
916. 武拥军，姜周华，梁连科，姜茂发，黄宗泽，陈兆平（2003）. 不锈钢冶炼过程中相关热力学问题的解析(Ⅲ)——含铬铁水的去碳保铬及脱气. 《钢铁研究学报》.
917. 武拥军，姜周华，梁连科，姜茂发，黄宗泽，陈兆平（2003）. 不锈钢冶炼过程中相关热力学问题的解析(Ⅱ)——含铬铁水的去磷保铬. 《钢铁研究学报》.
918. 武拥军，姜周华，梁连科，姜茂发，黄宗泽，陈兆平（2003）. 不锈钢冶炼过程中相关热力学问题的解析(Ⅰ)——原料预处理时的热力学问题. 《钢铁研究学报》.
919. 李亮，姜周华，王文忠，刘晓，顾文兵，徐荣军（2003）. 应用神经网络技术预报VD炉终点钢水温度. 《钢铁研究学报》.
920. 张贺艳，姜周华，梁连科，王文忠，刘晓，顾文兵，王军文（2003）. EAF-LF炼钢流程中钢水回磷的热力学分析. 《钢铁研究学报》.
921. 李亮，姜周华，王文忠，刘晓，顾文兵，徐荣军（2003）. VD炉终点钢液温度预报. 《钢铁》.
922. 张贺艳，姜周华，郭仲文，梁连科，王文忠，刘晓，顾文斌，王军文（2002）. EAF-LF炼钢流程中磷行为的研究. 《炼钢》.
923. 王厚昕，姜周华，梁连科，李阳（2002）. 钢铁冶金清洁生产中的新技术和新工艺. 《材料与冶金学报》.
924. 武拥军，姜周华，姜茂发，龚伟，战东平（2002）. LF炉精炼过程钢水温度预报模型. 《钢铁研究学报》.
925. 李阳，姜周华，姜茂发，王军文，顾文兵（2002）. CaO-Al2O3基精炼渣对钢液脱氧的影响. 《钢铁研究学报》.
926. 战东平，姜周华，王文忠，梁连科，郭仲文，李成斌（2002）. CaO-Al 2 O 3 -CaF 2 -MgO-SiO 2 五元预熔精炼渣系钢水深脱硫实验研究. 《中国金属学会第一届青年学术年会论文集》.
927. 李亮，姜周华，王文忠，徐荣军，刘晓，顾文兵（2002）. VD炉钢水温度预报模型. 《材料与冶金学报》.
928. 张贺艳，姜周华，王文忠，刘晓，顾文斌，王军（2002）. BaO和Na2O对LF精炼钢水回磷的影响. 《特殊钢》.
929. 战东平，姜周华，王文忠，孙国会，郭仲文，梁连科（2002）. 预熔精炼渣钢水深脱硫实验研究. 《材料与冶金学报》.
930. 吴远飞，姜周华（2002）. 电渣重熔过程中电极熔速的确定. 《材料与冶金学报》.
931. 李成斌，姜周华，梁连科，李阳（2002）. 钢水精炼喂Ca-Si线技术的研究和应用. 《材料与冶金学报》.
932. 邹俊苏，姜周华，厉英（2002）. 转炉炼钢脱氧新工艺研究. 《中国金属学会第一届青年学术年会论文集》.
933. 武拥军，姜周华，梁连科，姜茂发，李阳（2002）. 钢的液相线温度的计算. 《钢铁研究学报》.
934. 战东平，姜周华，王文忠（2002）. 超低硫钢冶炼过程钢包渣改质剂的作用. 《材料与冶金学报》.
935. 徐国利，邹俊苏，王贵平，张华书，姜周华，吴伟（2002）. 铁水炉外喷粉脱硫最佳参数的研究. 《现代交通与冶金材料》.
936. 战东平，姜周华，王文忠，梁连科，郭仲文，李成斌（2002）. CaO0Al2O3-CaF2-MgO-SiO2五元预熔渣系钢水深脱硫实验研究. 《炼钢》.
937. 张贺艳，姜周华，梁连科，王文忠（2002）. LF精炼过程还原脱磷可能性分析. 《材料与冶金学报》.
938. 李阳，姜周华，姜茂发，梁连科，王厚昕，王军文，顾文兵，刘晓，汪钺强（2002）. 含钡合金对冷镦钢脱氧的试验研究. 《材料与冶金学报》.
939. 龚伟，姜周华，郑万，陈念铀（2002）. 转炉冶炼过程中合金成分控制模型. 《东北大学学报(自然科学版)》.
940. 战东平，姜周华，王文忠，芮树森（2001）. 高洁净度管线钢中元素的作用与控制. 《钢铁》.
941. 姜周华，孙中强，李新宏，芮树森，马春生，许家彦，陶力群（2000）. 高流动性防潮石灰粉剂的研制及应用. 《钢铁》.
942. 李连福，姜周华，施丹昭（2000）. 废钢中铜的去除方法. 《钢铁研究学报》.
943. 兰杰，姜周华，黄宗泽，芮树森，顾文兵，罗建江，解希元（1999）. CaO-Al2O3-CaF2-SiO2-MgO五元精炼渣系的起泡性能. 《钢铁研究学报》.
944. 战东平，姜周华，芮树森，王文忠（1999）. RH真空精炼技术冶金功能综述. 《宝钢技术》.
945. 姜周华，刘喜海，张颖，尹立新，赵林，金东国（1998）. 电渣重熔Mn18Cr18N钢铸态热塑性与组织的关系. 《钢铁研究学报》.
946. 芮树森，姜周华（1997）. 现代电弧炉炼钢关键技术. 《宝钢技术》.
947. 姜周华，芮树森，刘喜海，肖玉光，王文忠，张妙法，钟志敏，汪钺强，杨仕明，王涛（1997）. 电弧炉兑铁水冶炼工艺的试验研究. 《1997中国钢铁年会论文集（下）》.
948. 姜周华（1995）. 辅助电极型成分传感器工作原理及适用条件. 《钢铁研究学报》.
949. 姜周华（1994）. 定硫电化学传感器可行性的理论分析和实验探索. 《钢铁研究学报》.
950. 杨怀，姜周华，解希元，孟丽萍（1989）. 等离子电弧炉回收Ni-Al合金细粉工艺的研究. 《东北大学学报(自然科学版)》.

书籍章节

1. Zhouhua Jiang, Yanwu Dong, Xin Geng, Fubin Liu (2026). Semi-continuous Electroslag Remelting Solid Ingot Technology. Springer eBooks.DOI
2. Zhouhua Jiang, Yanwu Dong, Xin Geng, Fubin Liu (2026). Fully Enclosed Controllable Atmosphere Electroslag Remelting New Technology. Springer eBooks.DOI
3. Zhouhua Jiang, Yanwu Dong, Xin Geng, Fubin Liu (2026). Introduction. Springer eBooks.DOI
4. Zhouhua Jiang, Yanwu Dong, Xin Geng, Fubin Liu (2026). Thermodynamics and Kinetics of Metallurgical Reactions in Electroslag Remelting Process. Springer eBooks.DOI
5. Zhouhua Jiang, Yanwu Dong, Xin Geng, Fubin Liu (2026). ESR Technology for Extra-thick Slab Ingots. Springer eBooks.DOI
6. Zhouhua Jiang, Yanwu Dong, Xin Geng, Fubin Liu (2026). Semi-continuous Electroslag Remelting Hollow Ingot Technology. Springer eBooks.DOI
7. Zhouhua Jiang, Yanwu Dong, Xin Geng, Fubin Liu (2026). Extra-large ESR Technology. Springer eBooks.DOI
8. Ang Yu, Xinxu Li, Chonglin Jia, Zhouhua Jiang (2022). Influence of Grain Size on Tensile and Stress Rupture Behavior of an Advanced Wrought Ni-Based Superalloy. Advances in transdisciplinary engineering.DOI
9. Ang Yu, Xinxu Li, Chonglin Jia, Zhouhua Jiang (2022). Study on Stress Rupture Properties of an Advanced Wrought Nickel-Based Superalloy Based on Microstructure Characteristics. Advances in transdisciplinary engineering.DOI
10. Sha Lv, Zongze Huang, Zan Yao, Xiaodong Ma, Geoff Wang, Zhouhua Jiang, Jin Zou, Baojun Zhao (2017). Formation Mechanisms of Inclusions in Spring Steels. ˜The œminerals, metals & materials series.DOI