刘战强

2026

基于涂层与智能感知协同的制造类课程改革——以“金属切削刀具与加工”课程模块为例

《教育教学论坛》

2026

超精密加工表面材料回弹与刀具刃口几何参数对切削力的影响规律

《制造技术与机床》

2026

切削加工过程材料动态变形原位测量技术研究进展

《制造技术与机床》

2026

难加工金属材料切削表面完整性预测与调控

《中国机械工程》

2026

基于时序样本深度聚类的无监督刀具磨损在线监测与应用

《制造技术与机床》

2026

基于热电式传感器的测温方法及其在智能刀具中的应用现状综述

《机械工程学报》

2026

基于相位补偿的可调阻尼刀具及其颤振抑制研究

《新技术新工艺》

DOI

2026

SiCf/SiC陶瓷基复合材料干切加工内冷却刀杆温度调控性能研究

《硬质合金》

2026

Accuracy enhancement method of confocal sensor-based on-machine measurement for curved shell parts

Measurement

DOI

2026

A physics-informed hybrid model for grinding force prediction

International Journal of Mechanical Sciences

DOI

2026

Substrate-Assisted Binder Jetting of M2 High-Speed Steel: Mechanisms of Printing Defects and Sintering Densification Behavior

Journal of Manufacturing and Materials Processing

DOI

2026

Physics-knowledge-enhanced attention network for milling chatter monitoring

International Journal of Mechanical Sciences

DOI

2026

IPEGCN: internal priors-guided external graph convolution network for machining defect segmentation under limited sample and strong interference

Journal of Intelligent Manufacturing

DOI

2026

Coupled vibration cutting: an extension of elliptical vibration cutting for residual ridge suppression using a bionic non-resonant vibration device

The International Journal of Advanced Manufacturing Technology

DOI

2026

Improving the machinability of difficult-to-machine materials through processing assisted by the Rehbinder effect: technology, mechanism, and challenges

Journal of Materials Research and Technology

DOI

2026

Synergistic Effects of Tool Texturing and Hybrid Cooling on Machining Performance of Ti-6Al-4V: A Comparative Study of Linear and Bionic Texture Tools

Chinese Journal of Mechanical Engineering

DOI

2026

Zr-modified TiAlSiN coatings regulate interfacial thermomechanics and primary shear-zone deformation during dry machining

Journal of Materials Research and Technology

DOI

2026

Integrated actuation-sensing system to enhance vibration stability in ultrasonic-assisted processing with in-situ monitoring

Mechanical Systems and Signal Processing

DOI

2026

Design and vibration reduction characteristics of a hollow multi-chambered particle-damped milling cutter inspired by the lotus root structure

Mechanical Systems and Signal Processing

DOI

2026

Ultrasonic vibration-assisted milling of SiCp/Al composites: A comparative study of milling modes and hybrid multi-objective optimization

Journal of Materials Research and Technology

DOI

2026

Analytical modeling of ultrasonic scratching force incorporating microscopic anisotropic damage mechanisms for 2.5D braided SiO2f/SiO2 composites

Composites Part A Applied Science and Manufacturing

DOI

2026

Measurement and evaluation of metal alloys-specific adaptability for ultrasonic-assisted cutting process: energy-based methodology

Measurement

DOI

2026

Micro-macro damage evolution simulation approach for ultrasonic machining SiO2f/SiO2 composites

International Journal of Mechanical Sciences

DOI

2026

A new design of boron-doped diamond coated intelligent cutting tool with self-temperature-sensing capability

Chinese Journal of Mechanical Engineering

DOI

2026

A High-Precision Workpiece Positioning System Based on Super-Resolution Microscopic Vision in Ultra-Precision Machining

Engineering

DOI

2026

Material removal mechanisms and edge effects in orthogonal cutting of shallow-interlaced braided SiO2f/SiO2 composites

Composites Part B Engineering

DOI

2026

Knowledge-guided gravitational feature fusion for robust industrial degradation modeling under data scarcity and noise

Advanced Engineering Informatics

DOI

2026

Effect of regenerated powder from cutting chip on clad morphology and micromechanical properties by laser cladding

Optics & Laser Technology

DOI

2026

Principal elemental segregation behavior during the machining of high-entropy alloy FeCoNiCrCu

The International Journal of Advanced Manufacturing Technology

DOI

2026

Structural optimization of eccentric fastening screws for small-sized indexable milling tools through finite element analysis

The International Journal of Advanced Manufacturing Technology

DOI

2026

Machining mechanism in laser-assisted milling of 2.5D woven SiO2f/SiO2 ceramic matrix composites using GMM–WOA

The International Journal of Advanced Manufacturing Technology

DOI

2026

Smart ultra-precision machining system integrated with online monitoring of machined surface profile accuracy and real-time error compensation

Journal of Manufacturing Systems

DOI

2026

Interfacial structure-governed free vibration response of laser cladded cylindrical shells

International Journal of Mechanics and Materials in Design

DOI

2026

Physics-informed data-driven framework for tool wear monitoring with limited samples: Mechanism-embedded learning

Journal of Manufacturing Systems

DOI

2026

Turning tool with built-in TPMS-particle composite damping structure: Vibration reduction mechanism and dynamic characteristics

Journal of Manufacturing Processes

DOI

2026

Multi-dimensional characterization and ensemble genetic algorithm–monte carlo simulation assisted multi-objective optimization of surface integrity in intelligent machining

Tribology International

DOI

2026

Energy conversion during acoustic softening in ultrasonic vibration-assisted milling of TNM alloy

Advances in Manufacturing

DOI

2026

Prediction of microstructure in machined deformation layer considering the effect of γ′ precipitates of FGH96 through a FEM-CA coupling method

Materials & Design

DOI

2026

Three-phase ultrasonic vibration cutting simulation and mechanism for SiO2f/SiO2 composites including structural anisotropy

The International Journal of Advanced Manufacturing Technology

DOI

2026

Grading evaluation criteria of drilling-induced damage in composites based on physics-constrained Gaussian process regression

Composites Part A Applied Science and Manufacturing

DOI

2026

Effect of Zr content on the microstructure, mechanical and tribological performance of TiAlSi(Zr)N coatings

Tribology International

DOI

2026

A new residual stress prediction model for laser-assisted burnishing inconel718

Materials & Design

DOI

2026

Effects of low temperature on laser ablation of Si 3 N 4 : Multi‐physics thermal–mechanical simulations and experiments

Journal of the American Ceramic Society

DOI

2026

Review of Temperature Measurement Methods Based on Thermoelectric Sensors and Current Status of Their Application in Intelligent Cutting Tools

Journal of Mechanical Engineering

DOI

2025

Challenges of randomness in tool wear with small samples: A physics-informed cross-domain monitoring method

Journal Of Manufacturing Systems，Vol. 800

DOI

2025

Intelligent monitoring system for production lines in smart factories: A hybrid method integrating Transformer and Kalman filter

Journal Of Manufacturing Systems，Vol. 790

DOI

2025

面向Ti6Al4V薄壁零件铣削的硬质合金刀具磨损预测

《硬质合金》

2025

面向极端工况压缩机的智能集成制造系统研究

《制造技术与机床》

DOI

2025

粉末冶金材料零件刀具优选试验研究

《组合机床与自动化加工技术》

DOI

2025

硬质合金刀具直角切削316L不锈钢表面黏附与黏附机理的研究

《工具技术》

2025

能量密度对激光选区熔化增材制造316L不锈钢致密度与表面残余应力的影响

《工具技术》

2025

螺旋槽型对麻花钻钻削C45号钢性能的影响：建模和实验

《硬质合金》

2025

Inconel 718直槽特征铣削加工走刀方式对切削性能的影响规律研究

《航空制造技术》

DOI

2025

雾化射流对6061铝合金车削加工性能的影响

《硬质合金》

2025

刊首语

《硬质合金》

2025

涡流法检测硬质合金刀具铣削CFRP表面裂纹损伤的数值模拟研究

《硬质合金》

2025

基于切屑卷曲半径分析的可转位浅孔钻刀片槽型优化

《硬质合金》

2025

断屑槽结构参数对可转位浅孔钻钻削H13钢钻削力的影响

《硬质合金》

2025

界面结构对薄壁件表面异质熔覆层铣削稳定性的影响规律

《表面技术》

DOI

2025

基于机器视觉的硬质合金刀具表面缺陷与磨损检测

《硬质合金》

2025

直角车削GH4169刀具全阶段磨损机理及磨损控制

《航空制造技术》

DOI

2025

Robust sliding mode control of vibration in thin-walled milling

International Journal of Mechanical Sciences

DOI

2025

A cutting tool wear Data-Physics fusion-driven monitoring method

International Journal of Mechanical Sciences

DOI

2025

Influence of strain rate-dependent grain boundary on mechanical property and machinability of IN718 via adaptive micro-cutting simulation

Machining science and technology

DOI

2025

A novel approach for measuring specific cutting energy based on cutting energy consumption and in-situ DIC technique

Measurement science and technology

DOI

2025

Enhanced Cooling Performance in Cutting Tools Using TPMS-Integrated Toolholders: A CFD-Based Thermal-Fluidic Study

Modelling

DOI

2025

Prediction of time-varying instantaneous material removal volume with point cloud contour-filling model in milling process

Advances in Manufacturing

DOI

2025

Superpixel-based multiple decision-making method for unsupervised defect detection during drilling of CFRCs components

Measurement

DOI

2025

High performance machining based on fretting wear mechanism of slot milled surfaces

Tribology International

DOI

2025

A Novel Hybrid Lubri-Cooling Approach for Machining of Ti-6Al-4V Through Combination of Pulsated Minimal Quantity Lubrication and Dry Ice Media

International Journal of Precision Engineering and Manufacturing-Green Technology

DOI

2025

A novel robotic milling chatter monitoring framework based on types identification and frequencies estimation

Mechanical Systems and Signal Processing

DOI

2025

Bioinspired quasi-liquid lubricating surface with exceptional friction reduction and wear resistance

Colloids and Surfaces A Physicochemical and Engineering Aspects

DOI

2025

Dislocation dynamics and thermal softening during laser-assisted orthogonal cutting γ-TiAl: Molecular dynamics simulation for laser parameter optimization

Materials Today Communications

DOI

2025

A neural network based on stochastic subspace theory for dynamic parameters recognition of the curved thin-walled parts milling process

Mechanical Systems and Signal Processing

DOI

2025

Effect of interfacial structure on turning stability and surface integrity of laser cladded cylindrical shells

The International Journal of Advanced Manufacturing Technology

DOI

2025

Prediction of surface profile in single-point diamond turning of microgrooves: a novel model incorporating multiple elastic-plastic deformation mechanism

Journal of Manufacturing Processes

DOI

2025

Laser-ultrasonic vibration hybrid assisted machining in advanced difficult-to-cut materials: Technologies, mechanisms, and challenges

Journal of Materials Processing Technology

DOI

2025

Scratching force and material removal mechanism of 2.5D SiO2f/SiO2 composites under single-abrasive scratch test

Journal of Manufacturing Processes

DOI

2025

Machining parameters inversion and regularity analysis based on surface topography point cloud of GH4169 alloy

Mechanical Systems and Signal Processing

DOI

2025

Finite-frequency dynamic output time delay feedback control for chatter mitigation in turning

The International Journal of Advanced Manufacturing Technology

DOI

2025

Mechanism-informed prediction of γ-TiAl alloy mechanical behavior via molecular dynamics and explainable machine learning

Materials Today Communications

DOI

2025

Ultrasonic vibration-assisted machining in aerospace composite materials: Principle, technology, challenges

Composites Part A Applied Science and Manufacturing

DOI

2025

Study on the plastic removal behavior of SiC ceramic materials in laser-assisted high-temperature turning

Optics & Laser Technology

DOI

2025

Laser surface texture for enhancement of tribological performance of AISI 5115 steel engine valve train components

Optics & Laser Technology

DOI

2025

Severe grain deformation and fracture in shear-based material removal test for Ni-based superalloy

Journal of Alloys and Compounds

DOI

2025

Quantitative analysis of milling chatter severity based on image-signal multi-modal data fusion

Journal of Manufacturing Processes

DOI

2025

Experimental characterization and formation mechanism of micro/nano-scale DRX grains in FGH96 machined surface layer

Materials Today Communications

DOI

2025

Theoretical modelling for accurate prediction of transient rapid temperature rise variation within whole tool tip area

Applied Thermal Engineering

DOI

2025

Modeling and simulation of 3D topographies of slot milled walls and floor surface considering slot bi-sided wall constraints

Journal of Manufacturing Processes

DOI

2025

Surface Anisotropy Based on Surface Integrity and Information Entropy of a Cladding Layer by Pre-turning and Burnishing

Journal of Materials Engineering and Performance

DOI

2025

Single-sensor-based reconstruction of force and displacement fields for thin-walled cylindrical shells milling

International Journal of Machine Tools and Manufacture

DOI

2025

An intelligent tool wear monitoring model based on knowledge-data-driven physical-informed neural network for digital twin milling

Mechanical Systems and Signal Processing

DOI

2025

Atomic insights into nano-cutting behavior of single-crystal CuZn alloy

International Journal of Mechanical Sciences

DOI

2025

Machining quality improvement through ice densification pretreatment during rotary ultrasonic face grinding SiO2f/SiO2 composite

Composites Part A Applied Science and Manufacturing

DOI

2025

In-situ DIC characterization of dislocation density and stored strain energy fields for deformation zones during cutting of Ti6Al4V alloy

Measurement

DOI

2025

Enhanced mechanical properties of Ti-6Al-4V titanium alloy through laser-assisted burnishing

The International Journal of Advanced Manufacturing Technology

DOI

2025

Milling Chatter Control in Low Immersion Condition with an Active Electromagnetic Tool Holder System

Micromachines

DOI

2025

Intelligent identification of material removal behavior during scratching of 4H-SiC based on acoustic emission sensing and unsupervised deep learning

Materials Science in Semiconductor Processing

DOI

2025

Bauschinger effect in nano-grinding of 3C-SiC: A molecular dynamics study

Wear

DOI

2025

Research on a New Method of Macro–Micro Platform Linkage Processing for Large-Format Laser Precision Machining

Micromachines

DOI

2025

Optimized design of chip-breaking geometry of insert for the high-stability indexable insert drill

DOI

2025

Toward high-performance machining of thin-walled parts: Fusion of parallel spatial–temporal information in high-speed milling for monitoring tool wear

Measurement

DOI

2025

Systematic error reduction in laser triangulation OMM: A study on measurement parameters and compensation techniques

Measurement

DOI

2025

Model for predicting milled floor surface topography by importing actual bottom tool-edge profile details via online image acquisition

Mechanical Systems and Signal Processing

DOI

2025

First-principles investigation on the brittleness mechanism of TiAl alloys and the effect of doping

Journal of Materials Research and Technology

DOI

2025

Geometric parameters optimization of tap via response surface methodology and nondominated sorting dung beetle optimization algorithm

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering

DOI

2025

A task-cooperative drilling monitoring method based on heterogeneous multi-task learning: Task adaptive fusion guided by domain knowledge

Mechanical Systems and Signal Processing

DOI

2025

Columnar-to-Equiaxed Transition on Laser Powder Bed Fusion Ultra-Precision Additive Manufacturing Accuracy and Surface Roughness for Solidified 316L Micro-Lattice Structure

Metals

DOI

2024

采用门控循环单元神经网络和多特征融合的铣削刀具磨损监测

《机械科学与技术》

2024

雾化射流对42CrMo钢车削断屑性能影响的实验研究

《工具技术》

2024

考虑移动边界约束作用的薄壁件铣削动特性研究

《机械科学与技术》

2024

干冰颗粒射流冷却铣削Inconel 718切削性能评价研究

《航空制造技术》

2024

基于切削力分析的可转位浅孔钻刀片槽型优化

《硬质合金》

2024

Analytical modelling for residual stress prediction in multi-step side milling of GH4169 thin-wall parts based on deformation

Journal of Materials Research and Technology

DOI

2024

State-of-the-art laser cladding using chip-regenerated powder: From the perspective of powder regeneration, laser cladding, and property improvement

Journal of Advanced Manufacturing Science and Technology

DOI

2024

An interpretable thread quality classification model for real-time inspection of tapping process

Measurement

DOI

2024

Fatigue performance of Ti6Al4V alloy treated with laser-assisted burnishing

International Journal of Fatigue

DOI

2024

Design and testing of additive manufactured multifold rotationally symmetric lattice structures by laser powder bed fusion

The International Journal of Advanced Manufacturing Technology

DOI

2024

Self-sensing sliding mode control of workpiece chatter based on accurate prediction of machining vibration

Journal of Sound and Vibration

DOI

2024

A Novel Design Method for Chip Flute of Indexable Insert Drill Used at Large Drilling Depth

Metals

DOI

2024

A dual knowledge embedded hybrid model based on augmented data and improved loss function for tool wear monitoring

Robotics and Computer-Integrated Manufacturing

DOI

2024

Milling surface roughness monitoring using real-time tool wear data

International Journal of Mechanical Sciences

DOI

2024

Numerical Simulation and Experimental Investigation on Friction and Lubrication Behaviors of Chevron Micro-Textured Valve Plate/Cylinder Block Interface With Various Area Densities

Journal of Tribology

DOI

2024

Milling chatter suppression based on the model predictive optimal control with Kalman state estimation

The International Journal of Advanced Manufacturing Technology

DOI

2024

A new characterization methodology for assessing machinability through cutting energy consumption

CIRP journal of manufacturing science and technology

DOI

2024

A novel correction method to improve the IR measurement accuracy of cutting tool and workpiece temperature

DOI

2024

Research on corrosion behavior and biocompatibility of NiTi alloy processed with combined dealloying and annealing treatment

Surface and Coatings Technology

DOI

2024

Leveraging artificial intelligence for real-time indirect tool condition monitoring: From theoretical and technological progress to industrial applications

International Journal of Machine Tools and Manufacture

DOI

2024

Debonding Fiber Damage Mechanism Modeling for Machining Damage Inhibition During Rotary Ultrasonic Face Grinding SiO2f/SiO2

Journal of Manufacturing Science and Engineering

DOI

2024

Effects of TiAlN Coating Thickness on Machined Surface Roughness, Surface Residual Stresses, and Fatigue Life in Turning Inconel 718

Metals

DOI

2024

Effect of plastic deformation of particle and substrate on metallurgical bonding during cold spraying

Materials Letters

DOI

2024

A novel analytical model for predicting ploughing effect on machined wall surface topography considering tool wear during slot milling process

Journal of Manufacturing Processes

DOI

2024

Chip breakage assisted by pulsed high-pressure jet during continuous cylindrical turning 42CrMo steel

Journal of Manufacturing Processes

DOI

2024

Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J–C Constitutive Relation Simulation Model

Coatings

DOI

2024

Design and application of grooved grinding head for improving the machined surface quality of ceramic composites

Ceramics International

DOI

2024

Micro-milling machinability prediction for crystalline materials via numerical-analytical hybrid modelling and strain rate-dependent grain-scale simulation

Journal of Manufacturing Processes

DOI

2024

Hole-exit defect formation during traditional and ultrasonic vibration-assisted drilling of C/SiC composites

The International Journal of Advanced Manufacturing Technology

DOI

2024

Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures

Metals

DOI

2024

How does the uncut chip thickness affect the deformation states within the primary shear zone during metal cutting?

International Journal of Machine Tools and Manufacture

DOI

2024

Surface integrity analysis of Si3N4 under cryogenic assisted femtosecond laser ablation

Ceramics International

DOI

2024

Investigation on multi-pulse femtosecond laser scribing of copper: Analysis of ablation grooves development and modeling modification

Materials & Design

DOI

2024

Effects of dealloying surface modification on machinability improvement of NiTi alloy during micro-machining process

Tribology International

DOI

2024

Femtosecond laser precision machining of carbon film based on aramid paper substrate

Journal of Manufacturing Processes

DOI

2024

Integrating textured tools and diverse lubricooling approaches in machining performance of Ti and Ni-base alloys – a comprehensive review

Machining Science and Technology

DOI

2024

In-situ characterization of thermo-mechanical deformation fields based on DIC during orthogonal cutting of Ti6Al4V

Journal of Manufacturing Processes

DOI

2024

Intrinsic and post-hoc XAI approaches for fingerprint identification and response prediction in smart manufacturing processes

Journal of Intelligent Manufacturing

DOI

2024

A novel cross-domain tool breakage monitoring method based on locality preserving joint transfer with intra-class compactness

Journal of Manufacturing Processes

DOI

2024

Synergy of Al2O3/GO hybrid nanofluids: Molecular dynamics perspective on dispersion/adsorption evolution and its tribological validation

Tribology International

DOI

2024

Cryogenic assisted femtosecond laser ablation of polycrystalline diamond

Diamond and Related Materials

DOI

2024

Model-free finite frequency H control for active chatter suppression in turning

Journal of Sound and Vibration

DOI

2024

Sensitivity analysis of stress/strain evolution on removal thickness in machining laser cladded workpiece with a novel FEM method

Archives of Civil and Mechanical Engineering

DOI

2024

Correlation between Surface Integrity and Low Cycle Fatigue Life of Machined Inconel 718

Metals

DOI

2024

Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys

Materials

DOI

2024

Chatter Stability Prediction for Deep-Cavity Turning of a Bent-Blade Cutter

Sensors

DOI

2024

Toward digital twins for high-performance manufacturing: Tool wear monitoring in high-speed milling of thin-walled parts using domain knowledge

Robotics and Computer-Integrated Manufacturing

DOI

2024

Suppression of cutting vibration in side milling of laser cladded layer on thin-walled parts with interfacial structures

Journal of Manufacturing Processes

DOI

2024

Investigation of Surface Integrity of Conical Hole in Laser Polishing 440C Stainless Steel

Metals

DOI

2023

[Review] A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions during machining process

Journal Of Manufacturing Systems，Vol. 700

DOI

2023

A milling tool wear monitoring method with sensing generalization capability

Journal Of Manufacturing Systems，Vol. 680

DOI

2023

高压射流对42CrMo钢车削断屑性能的实验研究

《工具技术》

2023

深孔麻花钻静刚度半经验模型研究

《工具技术》

2023

燃油微喷嘴加工质量对雾化特性的影响及工艺优化

《航空发动机》

2023

数字孪生驱动的薄壁件铣削刀具磨损状态识别方法

《航空制造技术》

2023

微量润滑方式对车削42CrMo钢断屑效果的影响分析

《工具技术》

2023

Ti2AlNb切削切屑形成过程近场动力学仿真及试验研究

《航空制造技术》

2023

基于多尺度晶粒细化演变的TC4加工表层硬度预测

《华南理工大学学报(自然科学版)》

2023

铣削加工测力刀柄参数优化设计研究

《电子机械工程》

2023

Chatter suppression techniques in milling processes: A state of the art review

Chinese Journal of Aeronautics

DOI

2023

Fiber orientation effects on grinding characteristics and removal mechanism of 2.5D Cf/SiC composites

Chinese Journal of Aeronautics

DOI

2023

In-situ test of full field deformation and chip formation mechanism during machining of Ti2AlNb intermetallic with digital image correlation method

CIRP journal of manufacturing science and technology

DOI

2023

Real-time chatter detection based on fast recursive variational mode decomposition

The International Journal of Advanced Manufacturing Technology

DOI

2023

Polytypic transformation behavior from 4H-SiC to 3C-SiC during high-speed scratching of single crystalline silicon carbide

Materials Letters

DOI

2023

A Novel Method for Predicting Residual Stress in GH4169 Machined Surfaces through Micro-Hardness Measurement

Applied Sciences

DOI

2023

Automatic detection and pixel-level quantification of surface microcracks in ceramics grinding: An exploration with Mask R-CNN and TransUNet

Measurement

DOI

2023

Numerical simulation and experimental study of femtosecond laser ablation of copper: A two-temperature model with temperature-dependent properties and multiple phase transitions

Optics & Laser Technology

DOI

2023

A novel dealloying assisted machining method to improve the machinability of NiTi alloy as a typical high toughness difficult-to-machine material

Materials & Design

DOI

2023

Finite-frequency H∞ control for active chatter suppression in turning

The International Journal of Advanced Manufacturing Technology

DOI

2023

On material flow behavior, strain energy, and improved surface integrity ratio in subsequent burnishing after turning

The International Journal of Advanced Manufacturing Technology

DOI

2023

An interpretable anti-noise convolutional neural network for online chatter detection in thin-walled parts milling

Mechanical Systems and Signal Processing

DOI

2023

Analytical model for thermo-mechanical interaction induced residual stress distribution during multi-conditional machining Inconel 718

Mechanical Systems and Signal Processing

DOI

2023

A tool wear condition monitoring method for non-specific sensing signals

International Journal of Mechanical Sciences

DOI

2023

On discontinuous stress and strain evolutions in machining of dissimilar laser cladded workpiece

Journal of Manufacturing Processes

DOI

2023

Grinding surface roughness prediction for silicon nitride ceramics: A dynamic grinding force and frequency domain approach

Ceramics International

DOI

2023

The hardening effect of deformation twinning based on visco-plastic self consistent model and a multi-scale grain refinement prediction model during machining of titanium alloy

Journal of Materials Research and Technology

DOI

2023

Optimized design of indexable insert drill based on radial cutting force balance

The International Journal of Advanced Manufacturing Technology

DOI

2023

Precise patterning of carbon films on polyethylene terephthalate polymer substrates using femtosecond lasers

Applied Surface Science

DOI

2023

Strain rate effect on material deformation and removal behavior during high speed scratching of 4H‐SiC

Tribology International

DOI

2023

Prediction of Tool Wear Rate and Tool Wear during Dry Orthogonal Cutting of Inconel 718

Metals

DOI

2023

Curing behaviors and mechanical properties of SiC-whisker-reinforced alumina ceramics fabricated with digital light processing

Journal of Materials Research and Technology

DOI

2023

Numerical prediction of surface morphology and roughness in rotary ultrasonic face grinding SiO2f/SiO2 composite

Journal of Materials Research and Technology

DOI

2023

Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions

Micromachines

DOI

2023

Effect of tool flank wear on formation and prediction of tool flank rolling angle using finite element method

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2023

Numerical analysis of residual stresses induced by cold spray fabricating cBN-reinforced Ni matrix composites

Surface and Coatings Technology

DOI

2023

Prediction of temperature field in machined workpiece surface during the cutting of Inconel 718 coated with surface-active media

Advances in Manufacturing

DOI

2023

Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with wear-resistance and anti-corrosion properties

Optics & Laser Technology

DOI

2023

Self-adaptive fusion of local-temporal features for tool condition monitoring: A human experience free model

Mechanical Systems and Signal Processing

DOI

2023

Episodes of single-crystal material removal mode and machinability in the micro-cutting process of superalloy Inconel-718

Journal of Materials Research and Technology

DOI

2023

Progressive mapping surface integrity and multi-objective optimizing surface quality of machining Ti-6Al-4V based novel tool failure criterion

CIRP journal of manufacturing science and technology

DOI

2023

Effect of Coating Thickness on the Bond Strength of Cold-Sprayed Ni-Based cBN Coating on 42CrMo Substrate

Journal of Thermal Spray Technology

DOI

2023

Influence of unilateral constraint on machining dynamics of large overhang milling cutter

The International Journal of Advanced Manufacturing Technology

DOI

2023

Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process

Journal of Manufacturing Processes

DOI

2023

Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching process for drag reduction

Applied Surface Science

DOI

2023

Micro/nano manufacturing aircraft surface with anti-icing and deicing performances: An overview

Nanotechnology Reviews

DOI

2023

Gallium-based liquid metal hybridizing MoS 2 nanosheets with reversible rheological characteristics and enhanced lubrication properties

RSC Advances

DOI

2023

Study on the infiltration mechanism of tellurium into the Inconel 718

Journal of Materials Science

DOI

2023

Grain-scale Pseudorandom Modelling and Simulation for Inconel-718 Miniature Parts

Journal of Mechanical Engineering

DOI

2022

钛合金高质高效切削加工刀具技术

《金属加工(冷加工)》

2022

Microstructures and mechanical properties of additively manufactured alumina ceramics with digital light processing

Archives of Civil and Mechanical Engineering

DOI

2022

Investigation of mechanism and surface morphology on the femtosecond laser ablation of silicon nitride under different auxiliary processing environments

Ceramics International

DOI

2022

In-situ DIC measurement of material deformation through spatial–temporal kinematics analysis during orthogonal cutting Ti6Al4V

Measurement

DOI

2022

Intelligent recognition of tool wear in milling based on a single sensor signal

The International Journal of Advanced Manufacturing Technology

DOI

2022

Modelling and prediction of surface topography on machined slot side wall with single-pass end milling

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effect of Ball Burnishing Pressure on Surface Roughness by Low Plasticity Burnishing Inconel 718 Pre-Turned Surface

Materials

DOI

2022

Real-Time milling tool breakage monitoring based on multiscale standard deviation diversity entropy

International Journal of Mechanical Sciences

DOI

2022

Prediction modelling of cutting force in rotary ultrasonic end grinding 2.5D woven SiO2f/SiO2 ceramic matrix composite

Composite Structures

DOI

2022

Friction behaviors in the metal cutting process: state of the art and future perspectives

International Journal of Extreme Manufacturing

DOI

2022

Microstructure and mechanical properties of NiTi nanoporous structures fabricated with dealloying process

Journal of Alloys and Compounds

DOI

2022

Mechanism of laser-chemical process to remove of oxide layer and formation of periodic microstructures for drag reduction

Surfaces and Interfaces

DOI

2022

The influence of turning and burnishing on corrosion resistance of laser cladded Fe–Cr–Ni layer from viewpoints of thermodynamics and kinetics

Archives of Civil and Mechanical Engineering

DOI

2022

Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effect of Cutting Parameters on Tool Chipping Mechanism and Tool Wear Multi-Patterns in Face Milling Inconel 718

Lubricants

DOI

2022

Machining Distortion for Thin-Walled Superalloy GH4169 Caused by Residual Stress and Manufacturing Sequences

Metals

DOI

2022

Effects of Chevron Micro-Textures on Tribological and Lubricating Performance of Cylinder Block/Valve Plate Interface in Axial Piston Pumps

Journal of Tribology

DOI

2022

Grain-scale material removal mechanisms of crystalline material micro-cutting

International Journal of Mechanical Sciences

DOI

2022

Tool wear monitoring through online measured cutting force and cutting temperature during face milling Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2022

To decrease the turning-induced pitting susceptibility of laser-cladded Fe–Cr–Ni layer by low plasticity burnishing

Archives of Civil and Mechanical Engineering

DOI

2022

Improving thermal conductivity of Inconel 718 through thermoelectric coupling to reduce cutting temperature

Journal of Materials Research and Technology

DOI

2022

Multi-scale modeling method for polycrystalline materials considering grain boundary misorientation angle

Materials & Design

DOI

2022

Enhancement of Inconel 718 resistance to tellurium corrosion through cyclic dynamic microwave thermal shock

Materials Letters

DOI

2022

An Early Chatter Detection Method Based on Multivariate Variational Mode Decomposition and Chatter Correlation Factor

IEEE/ASME Transactions on Mechatronics

DOI

2022

Optimizing amplitude to improve machined surface quality in longitudinal ultrasonic vibration-assisted side milling 2.5D C/SiC composites

Composite Structures

DOI

2022

Effects of process parameters on periodic impact force exerting on cutting tool in ultrasonic vibration-assisted oblique turning

Advances in Manufacturing

DOI

2022

Enhancement of Te infiltration into Inconel 718 surface layer through dynamic microwave thermal shock

Applied Surface Science

DOI

2022

Evaluation and prediction of pore effects on single-crystal mechanical and damage properties of selective laser melted Inconel-718

Materials & Design

DOI

2022

Osteogenic and antibacterial ability of micro-nano structures coated with ZnO on Ti-6Al-4V implant fabricated by two-step laser processing

Journal of Material Science and Technology

DOI

2022

Studies on the Microstructural Evolution and Mechanical Properties of Superalloy Inconel 718 Induced by Low Plasticity Burnishing Coupled with Turning

Materials

DOI

2022

The state of the art for numerical simulations of the effect of the microstructure and its evolution in the metal-cutting processes

International Journal of Machine Tools and Manufacture

DOI

2022

Development of Tool Wear Standards and Wear Mechanism for Micro Milling Ti-6Al-4V Alloy

Metals

DOI

2022

Formation mechanism of superhydrophobicity of stainless steel by laser-assisted decomposition of stearic acid and its corrosion resistance

Optics & Laser Technology

DOI

2022

Three-dimensional Modeling and Simulation of Muscle Tissue Puncture Process

Chinese Journal of Mechanical Engineering

DOI

2022

Crystallographic texture evolutions of Ti-6Al-4V chip foils in relation to strain path and high strain rate arising from large strain extrusion machining process

Journal of Materials Processing Technology

DOI

2022

Heat transfer enhancement with surface-active thermal conductive media coating during orthogonal cutting Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2022

Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718

Tribology International

DOI

2022

Effect of workpiece work hardening on machined surface topography generated in two-step milling process

Journal of Manufacturing Processes

DOI

2022

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Materials

DOI

2022

Dual-phase morphology distribution effects on mechanical behaviors of Ti6Al4V via pseudorandom crystal plasticity modeling

Journal of Materials Research and Technology

DOI

2022

Numerical prediction and experimental investigation of residual stresses in sequential milling of GH4169 considering initial stress effect

The International Journal of Advanced Manufacturing Technology

DOI

2022

Predefined-Time Barrier Function Adaptive Sliding-Mode Control and Its Application to Piezoelectric Actuators

IEEE Transactions on Industrial Informatics

DOI

2022

Prediction of micro milling force and surface roughness considering size-dependent vibration of micro-end mill

The International Journal of Advanced Manufacturing Technology

DOI

2022

An investigation on thermo-mechanical performance of graphene-oxide-reinforced shape memory polymer

Nanotechnology Reviews

DOI

2022

Mechanical and heat transfer properties of 4D-printed shape memory graphene oxide/epoxy acrylate composites

Nanotechnology Reviews

DOI

2021

微型喷嘴的雾化性能及加工技术研究进展

《工具技术》

2021

工件初始表面几何状态对铣削力及表面形貌的影响

《工具技术》

2021

刀具螺旋槽磨削接触线的几何求解及其在三维建模中的应用

《制造技术与机床》

DOI

2021

Intermetallic compounds Cr3Te4/NiNbTe2 formation during infiltrating Te into Inconel 718

Materials Letters

DOI

2021

Tribological Performance of Multiscale Micro-Textured H62 Brass Surface Fabricated by Micro-Milling and Wet Micro-Blasting

Journal of Tribology

DOI

2021

Experimental and modeling investigation on thermodynamic effect of graphene doped shape memory epoxy composites

Polymer

DOI

2021

Multiscale design and biomechanical evaluation of porous spinal fusion cage to realize specified mechanical properties

Bio-Design and Manufacturing

DOI

2021

Effect of graphene oxide doping on anti-/deicing performance of shape memory epoxy resin

Materials Today Communications

DOI

2021

A machine learning-based framework for automatic identification of process and product fingerprints for smart manufacturing systems

Journal of Manufacturing Processes

DOI

2021

Phase transition and dynamic recrystallization mechanisms of white layer formation during turning superalloy Inconel 718

Journal of Materials Research and Technology

DOI

2021

Vortices degradation and periodical variation in spiral micromixers with various spiral structures

International Journal of Heat and Mass Transfer

DOI

2021

Numerical investigation of heat transfer performance of graphene-doped anti-/deicing component

Thermal Science and Engineering Progress

DOI

2021

Effects of the inclination angles of DLC end face micro-texture on the tribological properties of dry gas seal rings

Surface Topography Metrology and Properties

DOI

2021

Microstructural characteristics, deformation behavior and mechanical properties of Inconel 718 treated by Te infiltration

Journal of Alloys and Compounds

DOI

2021

Study on the heat transfer reinforcement of glass fiber/epoxy resin composites by grafting and dispersing graphene oxide

Composites Science and Technology

DOI

2021

Theoretical Modeling and Analysis of Directional Spectrum Emissivity and Its Pattern for Random Rough Surfaces with a Matrix Method

Symmetry

DOI

2021

Tool wear induced the gradient distribution of surface integrity with process-microstructure-property characteristics after turning Ti-6Al-4 V

Journal of Manufacturing Processes

DOI

2021

Novel combination of indicators to compare the corrosion behaviors of Al, Al–Li alloy 2A97, and other Al alloys

Materials and Corrosion

DOI

2021

Wear Characteristics of Cutting Tool in Brittle Removal of a Ductile Meta in High-Speed Machining

Symmetry

DOI

2021

Effects of Sequential Operation with Heat Treatment and Mechanical Milling on Work Hardening for Superalloy GH4169

Metals

DOI

2021

A Novel Unsupervised Machine Learning-Based Method for Chatter Detection in the Milling of Thin-Walled Parts

Sensors

DOI

2021

Geometry-considered 3D pseudorandom grain-scale modelling for crystalline material miniature parts

Materials & Design

DOI

2021

Longitudinal amplitude effect on material removal mechanism of ultrasonic vibration-assisted milling 2.5D C/SiC composites

Ceramics International

DOI

2021

A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process

The International Journal of Advanced Manufacturing Technology

DOI

2021

Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources

The International Journal of Advanced Manufacturing Technology

DOI

2021

Multi-condition identification in milling Ti-6Al-4V thin-walled parts based on sensor fusion

Mechanical Systems and Signal Processing

DOI

2021

Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools

Journal of Advanced Research

DOI

2021

An improved numerical integration method to predict the milling stability based on the Lagrange interpolation scheme

The International Journal of Advanced Manufacturing Technology

DOI

2021

Characterization of microstructure and mechanical properties for Ti-6Al-4 V processed by rotary ultrasonic roller burnishing

Materials Characterization

DOI

2021

Microstructure and machinability evaluation in micro milling of selective laser melted Inconel 718 alloy

Journal of Materials Research and Technology

DOI

2021

Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools

The International Journal of Advanced Manufacturing Technology

DOI

2021

Microstructure simulation and heat transfer optimization for graphene oxide doped anti-/deicing composites

Composites Science and Technology

DOI

2021

Saturated adaptive barrier sliding mode control with state‐dependent uncertainty limit

IET Control Theory and Applications

DOI

2021

Advancements in material removal mechanism and surface integrity of high speed metal cutting: A review

International Journal of Machine Tools and Manufacture

DOI

2021

Surface texture and friction property of Ti-6Al-4V processed by rotary ultrasonic rolling

The International Journal of Advanced Manufacturing Technology

DOI

2021

Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Parameters Optimization of Turning Superalloy Inconel 718

Materials

DOI

2021

Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums

Journal of Alloys and Compounds

DOI

2021

Disturbance estimator-based switching function for discrete-time sliding mode control systems with control saturation

Transactions of the Institute of Measurement and Control

DOI

2021

Dynamic Response Analysis of a Thin Plate with Partially Constrained Layer Damping Optimization under Moving Loads for Various Boundary Conditions

Applied Sciences

DOI

2021

Tribological performance based machinability investigations in cryogenic cooling assisted turning of α-β titanium Alloy

Tribology International

DOI

2021

Effect of oxygen on Te infiltration into superalloy Inconel 718 at elevated temperature

Surface and Coatings Technology

DOI

2021

Active vibration control of thin-walled milling based on ANFIS parameter optimization

The International Journal of Advanced Manufacturing Technology

DOI

2021

Mathematical modeling of heat transfer in GO-doped reinforce polymer for anti-/deicing of wind turbines

International Communications in Heat and Mass Transfer

DOI

2021

Thermal conductivity and anti-corrosion of epoxy resin based composite coatings doped with graphene and graphene oxide

Composites Part C Open Access

DOI

2021

A cost-effective serpentine micromixer utilizing ellipse curve

Analytica Chimica Acta

DOI

2021

Optimisation of Planning Parameters for Machining Blade Electrode Micro-Fillet with Scallop Height Modelling

Micromachines

DOI

2021

Effects of Physicochemical Properties of Different Base Oils on Friction Coefficient and Surface Roughness in MQL Milling AISI 1045

International Journal of Precision Engineering and Manufacturing-Green Technology

DOI

2021

Formation mechanism of tearing defects in machining Nomex honeycomb core

The International Journal of Advanced Manufacturing Technology

DOI

2021

The biomechanical effects of Ti versus PEEK used in the PLIF surgery on lumbar spine: a finite element analysis

Computer Methods in Biomechanics & Biomedical Engineering

DOI

2021

Milling stability prediction based on the hybrid interpolation scheme of the Newton and Lagrange polynomials

The International Journal of Advanced Manufacturing Technology

DOI

2021

Optimization of thermal and hydrophobic properties of GO-doped epoxy nanocomposite coatings

Nanotechnology Reviews

DOI

2021

Influence of Surface Characteristics of Medical Needle on Puncture Process

Journal of Mechanical Engineering

DOI

2020

深冷处理对TiAlN涂层刀具微观组织及力学性能的影响

《工具技术》

2020

基于响应曲面法的NOMEX蜂窝高速铣削参数优化

《工具技术》

2020

Effect of element Te on alterations of microstructure and mechanical property of nickel-based superalloy Inconel 718 through alloy infiltration

Applied Surface Science

DOI

2020

Position-Dependent Stability Prediction for Multi-Axis Milling of the Thin-Walled Component with a Curved Surface

Applied Sciences

DOI

2020

3D Printed Ti–6Al–4V Implant with a Micro/Nanostructured Surface and Its Cellular Responses

ACS Omega

DOI

2020

Tribological behavior of textured tools in sustainable turning of nickel based super alloy

Tribology International

DOI

2020

Analytical modeling of surface generation in ultrasonic ball burnishing including effects of indentation pile-up/sink-in and chipping fracture

Archives of Civil and Mechanical Engineering

DOI

2020

Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800

Journal of Cleaner Production

DOI

2020

Visco-plastic self-consistent modeling of crystallographic texture evolution related to slip systems activated during machining Ti-6AL-4V

Journal of Alloys and Compounds

DOI

2020

An analytical prediction model for residual stress distribution and plastic deformation depth in ultrasonic-assisted single ball burnishing process

The International Journal of Advanced Manufacturing Technology

DOI

2020

Tool coating effects on cutting temperature during metal cutting processes: Comprehensive review and future research directions

Mechanical Systems and Signal Processing

DOI

2020

Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under various tool wear morphologies

Journal of Materials Processing Technology

DOI

2020

Design of Discrete-Time Sliding Mode Control With Disturbance Compensator-Based Switching Function

IEEE Transactions on Circuits & Systems II Express Briefs

DOI

2020

PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718

International Journal of Heat and Mass Transfer

DOI

2020

Biomechanical analysis of combination Ti/PEEK fusion cage designed with topology optimization

International Journal of Applied Electromagnetics and Mechanics

DOI

2020

Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4 V alloy

Sustainable materials and technologies

DOI

2020

Graphene Nanoarchitectonics: A New Material Horizon for Reinforcement of Sustainable Polymers

Frontiers in Materials

DOI

2020

Dynamic model and stability prediction of thin-walled component milling with multi-modes coupling effect

Journal of Materials Processing Technology

DOI

2020

A comprehensive method for selecting cutting tool materials

The International Journal of Advanced Manufacturing Technology

DOI

2020

Tool wear induced modifications of plastic flow and deformed material depth in new generated surfaces during turning Ti-6Al-4V

Journal of Materials Research and Technology

DOI

2020

Porous fusion cage design via integrated global-local topology optimization and biomechanical analysis of performance

Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials

DOI

2020

Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti–6Al–4V alloy

Tribology International

DOI

2020

Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy

Journal of Materials Research and Technology

DOI

2020

Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations

Applied Surface Science

DOI

2020

Multi-pattern failure modes and wear mechanisms of WC-Co tools in dry turning Ti–6Al–4V

Ceramics International

DOI

2020

Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review

The International Journal of Advanced Manufacturing Technology

DOI

2020

Progress for sustainability in the mist assisted cooling techniques: a critical review

The International Journal of Advanced Manufacturing Technology

DOI

2020

Sliding Mode Control for Uncertain Discrete-Time Systems Using an Adaptive Reaching Law

IEEE Transactions on Circuits & Systems II Express Briefs

DOI

2020

Effect of turning-induced initial roughness level on surface roughness and residual stress improvements in subsequent burnishing

Archives of Civil and Mechanical Engineering

DOI

2020

Anticorrosion property enhancement of Al–Li alloy 2A97 by lowering machined surface roughness

Materials and Corrosion

DOI

2020

Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage

Journal of Manufacturing Processes

DOI

2020

An experimental investigation on heat transfer performance of rotating anti-/deicing component

Applied Thermal Engineering

DOI

2020

Development of a toolholder with high dynamic stiffness for mitigating chatter and improving machining efficiency in face milling

Mechanical Systems and Signal Processing

DOI

2020

Precise chatter monitoring of thin-walled component milling process based on parametric time-frequency transform method

Journal of Materials Processing Technology

DOI

2020

Machinability investigations of hardened steel with biodegradable oil-based MQL spray system

The International Journal of Advanced Manufacturing Technology

DOI

2020

The heat partition into cutting tool at tool-chip contact interface during cutting process: a review

The International Journal of Advanced Manufacturing Technology

DOI

2020

Chatter suppression in large overhang face milling using a toolholder with high dynamic performance

The International Journal of Advanced Manufacturing Technology

DOI

2020

Strain Rate of Metal Deformation in the Machining Process from a Fluid Flow Perspective

Applied Sciences

DOI

2020

Correlation between the microstructure and machinability in machining Al–(5–25) wt% Si alloys

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2020

Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining

The International Journal of Advanced Manufacturing Technology

DOI

2020

Sustainable manufacturing: re-contouring of laser cladding restored parts by machining method with cutting energy management

Archives of Civil and Mechanical Engineering

DOI

2020

Dynamic characteristics analysis of locomotive traction gear pair system under internal and external excitations

Engineering Computations

DOI

2020

Process-surface morphology-tribological property relationships for H62 brass employing various manufacturing approaches

Tribology International

DOI

2020

Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination

Micromachines

DOI

2020

Constrained layer damping treatment of a model support sting

Chinese Journal of Aeronautics

DOI

2020

Milling force and surface morphology of 45 steel under different Al2O3 nanofluid concentrations

The International Journal of Advanced Manufacturing Technology

DOI

2020

Influence of a Biocompatible Hydrophilic Needle Surface Coating on a Puncture Biopsy Process for Biomedical Applications

Coatings

DOI

2020

On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review

Journal of Manufacturing Processes

DOI

2020

On cutting temperatures in high and ultrahigh-speed machining

The International Journal of Advanced Manufacturing Technology

DOI

2020

Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel

Journal of Cleaner Production

DOI

2020

A pseudorandom based crystal plasticity finite element method for grain scale polycrystalline material modeling

Mechanics of Materials

DOI

2020

Physic-chemical analysis for high-temperature tribology of WC-6Co against Ti–6Al–4V by pin-on-disc method

Tribology International

DOI

2020

Thermal contact resistance enhancement with aluminum oxide layer generated on TiAlN-coated tool and its effect on cutting performance for H13 hardened steel

Surface and Coatings Technology

DOI

2020

Analytical Prediction and Experimental Investigation of Burnishing Force in Rotary Ultrasonic Roller Burnishing Titanium Alloy Ti–6Al–4V

Journal of Manufacturing Science and Engineering

DOI

2020

Abrasive Wear Behavior of Cryogenically Treated Boron Steel (30MnCrB4) Used for Rotavator Blades

Materials

DOI

2020

An applied explicit mathematical model of conical drill point geometry without flank rubbing

The International Journal of Advanced Manufacturing Technology

DOI

2020

Plastic flow behavior for machined surface material Ti-6Al-4V with rotary ultrasonic burnishing

Journal of Materials Research and Technology

DOI

2020

Needle deformation in the process of puncture surgery: experiment and simulation

Procedia CIRP

DOI

2020

Preparation and bioactive response of super-hydrophilic surface on selective laser melting titanium

Procedia CIRP

DOI

2020

Improvement of Milling Stable Processing Condition for a Cutter With Large Ratio of Length to Diameter

IEEE Access

DOI

2020

Influence of Biocompatible Hydrophilic Coated Needle on Puncture Process through a Simulation Method

Procedia CIRP

DOI

2019

基于加工特征的整体叶盘数控编程与加工参数优化

《组合机床与自动化加工技术》

DOI

2019

The modification of corrosion resistance of 17-4PH stainless steel by cutting process

Journal of Manufacturing Processes

DOI

2019

Ultrasonic-Induced Phase Redistribution and Acoustic Hardening for Rotary Ultrasonic Roller Burnished Ti-6Al-4V

Metallurgical and Materials Transactions A

DOI

2019

Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy

Journal of Cleaner Production

DOI

2019

Investigation on specific milling energy and energy efficiency in high-speed milling based on energy flow theory

Energy

DOI

2019

Tool wear-induced microstructure evolution in localized deformation layer of machined Ti–6Al–4V

Journal of Materials Science

DOI

2019

Effect of electrochemical polishing on surface quality of nickel-titanium shape memory alloy after milling

Journal of Materials Research and Technology

DOI

2019

Vibration suppression of thin-walled workpiece milling using a time-space varying PD control method via piezoelectric actuator

The International Journal of Advanced Manufacturing Technology

DOI

2019

Effects of Machining Induced Residual Shear and Normal Stresses on Fatigue Life and Stress Intensity Factor of Inconel 718

Applied Sciences

DOI

2019

Investigations into planar splitting and recombining micromixers with asymmetric structures

Journal of Micromechanics and Microengineering

DOI

2019

Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turning of Nimonic-90 Using Hybrid Particle Swarm-Simplex Method

Materials

DOI

2019

Residual Stress Regenerated on Low Plasticity Burnished Inconel 718 Surface After Initial Turning Process

Journal of Manufacturing Science and Engineering

DOI

2019

Effects of Surface Roughness Parameters on Tribological Performance for Micro-textured Eutectic Aluminum–Silicon Alloy

Journal of Tribology

DOI

2019

A theoretical power model for medium equipment and validation for turning machine based on power flow theory

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2019

Modelling for prediction of time-varying heat partition coefficient at coated tool-chip interface in continuous turning and interrupted milling

International Journal of Machine Tools and Manufacture

DOI

2019

Macroscopic Topology Optimization of Fusion Cages Used in TLIF Surgery

Mechanisms and machine science

DOI

2019

Numerical Simulation on Effect of Graphene Doped Morphology on Heat Transfer Efficiency of Anti-/deicing Component

Mechanisms and machine science

DOI

2019

Tool Wear, Surface Topography, and Multi-Objective Optimization of Cutting Parameters during Machining AISI 304 Austenitic Stainless Steel Flange

Metals

DOI

2019

Construction of Complex Structures Containing Micro-Pits and Nano-Pits on the Surface of Titanium for Cytocompatibility Improvement

Materials

DOI

2019

Performance Evaluation of Vegetable Oil-Based Nano-Cutting Fluids in Environmentally Friendly Machining of Inconel-800 Alloy

Materials

DOI

2019

Work hardening influencing on shape memory effect of NiTi alloy by varying milling speeds

Smart Materials and Structures

DOI

2019

Surface modification through combination of finish turning with low plasticity burnishing and its effect on fatigue performance for Inconel 718

Surface and Coatings Technology

DOI

2019

Hydrodynamic lubrication analysis of two-dimensional section between piston skirt and textured cylinder wall considering slip boundary conditions

Tribology International

DOI

2019

An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718

International Journal of Precision Engineering and Manufacturing-Green Technology

DOI

2019

Surface Characterization and Tribological Performance of Anodizing Micro-Textured Aluminum-Silicon Alloys

Materials

DOI

2019

Experimental study on the formation of TCR and thermal behavior of hard machining using TiAlN coated tools

International Journal of Heat and Mass Transfer

DOI

2019

Influences of TiAlN Coating on Cutting Temperature during Orthogonal Machining H13 Hardened Steel

Coatings

DOI

2019

Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic tools

The International Journal of Advanced Manufacturing Technology

DOI

2019

Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pressures and injection positions

Journal of Manufacturing Processes

DOI

2019

Effects of overlap rate and energy density on mechanical properties of Inconel 718 by multiple small-spot-LSP impacts

Materials Research Express

DOI

2019

Product and Process Fingerprint for Nanosecond Pulsed Laser Ablated Superhydrophobic Surface

Micromachines

DOI

2019

Optimization design and simulationanalysis of composite material anti-/deicing component for wind turbine blade

IOP Conference Series Earth and Environmental Science

DOI

2019

Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V

Tribology International

DOI

2019

Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy

The International Journal of Advanced Manufacturing Technology

DOI

2019

Measurement of temperature-dependent thermal conductivity for PVD Ti0.55Al0.45N ceramic coating by time domain thermo-reflectance method

Ceramics International

DOI

2019

One-Dimensional Heat Conduction Inverse Modelling of Heat Flux Generated at Tool-Chip Interface in Cutting Inconel 718

IEEE Access

DOI

2019

Comparative Study on Electrochemical Behavior of Al-Li Alloy 2A97 Machined Surfaces in Sodium Chloride Solution

IEEE Access

DOI

2018

高速切削材料变形及断裂行为对切屑形成的影响机理研究

《金属加工(冷加工)》

2018

钛合金Ti-6Al-4V高压冷却车削过程有限元分析

《现代制造工程》

2018

TiN刀具涂层抗多次冲击性能研究

《现代制造工程》

2018

Sustainability assessment of dry turning Ti-6Al-4V employing uncoated cemented carbide tools as clean manufacturing process

Journal of Cleaner Production

DOI

2018

Analysis and implementation of chatter frequency dependent constrained layer damping tool holder for stability improvement in turning process

Journal of Materials Processing Technology

DOI

2018

A study on corrosion behaviors of laser cladded Fe−Cr−Ni coating in as‐cladded and machined conditions

Materials and Corrosion

DOI

2018

Construction of Antibacterial and Bioactive Surface for Titanium Implant

Nanomanufacturing and Metrology

DOI

2018

Characteristics of machined surface integrity in face milling Al-Li alloy 2A97 with carbide inserts

The International Journal of Advanced Manufacturing Technology

DOI

2018

A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

Journal of Manufacturing Science and Engineering

DOI

2018

Stability of turning process with a distributed cutting force model

The International Journal of Advanced Manufacturing Technology

DOI

2018

Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation

Materials Science and Engineering C

DOI

2018

Bifurcation and chaos analysis for a spur gear pair system with friction

Journal of the Brazilian Society of Mechanical Sciences and Engineering

DOI

2018

A simulation model for predicting surface integrity coupled thermal–mechanical effect in turning of Inconel 718 super alloy

The International Journal of Advanced Manufacturing Technology

DOI

2018

Size-dependent responses of micro-end mill based on strain gradient elasticity theory

The International Journal of Advanced Manufacturing Technology

DOI

2018

Effect of wall roughness on performance of microchannel applied in microfluidic device

Microsystem Technologies

DOI

2018

State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review

Measurement

DOI

2018

Reduction of dynamic response of a bar using constrained layer damping composite structure

Journal of Physics Conference Series

DOI

2018

Influence of rotational damping on stability in end milling processes

The International Journal of Advanced Manufacturing Technology

DOI

2018

Effect of machining‐induced surface integrity on the corrosion behavior of Al–Li alloy 2A97 in sodium chloride solution

Materials and Corrosion

DOI

2018

Microstructure refinement and work hardening in a machined surface layer induced by turning Inconel 718 super alloy

International Journal of Minerals Metallurgy and Materials

DOI

2018

Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools

Materials

DOI

2018

Cutting temperature measurement using an improved two-color infrared thermometer in turning Inconel 718 with whisker-reinforced ceramic tools

Ceramics International

DOI

2018

Effects of Thermo-physical properties of Ti0.41Al0.59N coating on transient and steady cutting temperature distributions in coated cemented carbide tools

International Communications in Heat and Mass Transfer

DOI

2018

Influences of tool structure, tool material and tool wear on machined surface integrity during turning and milling of titanium and nickel alloys: a review

The International Journal of Advanced Manufacturing Technology

DOI

2018

Effects of Cutting Edge Microgeometry on Residual Stress in Orthogonal Cutting of Inconel 718 by FEM

Materials

DOI

2018

Chatter detection and stability region acquisition in thin-walled workpiece milling based on CMWT

The International Journal of Advanced Manufacturing Technology

DOI

2018

Morphologically modified surface with hierarchical micro-/nano-structures for enhanced bioactivity of titanium implants

Journal of Materials Science

DOI

2018

Microhardness Prediction Based on a Microstructure-Sensitive Flow Stress Model During High Speed Machining Ti-6Al-4V

Journal of Manufacturing Science and Engineering

DOI

2018

Stress-Strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature

Materials

DOI

2018

Experimental Investigation of Principal Residual Stress and Fatigue Performance for Turned Nickel-Based Superalloy Inconel 718

Materials

DOI

2018

Effect of cutting parameters on strain hardening of nickel–titanium shape memory alloy

Smart Materials and Structures

DOI

2018

Influences of cutting fluid conditions and cutting parameters on surface integrity of Inconel 718 under high‐pressure jet–assisted machining (HPJAM)

Lubrication Science

DOI

2018

Influences of Cutting Speed and Material Mechanical Properties on Chip Deformation and Fracture during High-Speed Cutting of Inconel 718

Materials

DOI

2018

High-pressure coolant effect on the surface integrity of machining titanium alloy Ti-6Al-4V: a review

Materials Research Express

DOI

2018

Enhancing tribological performance by anodizing micro-textured surfaces with nano-MoS2 coatings prepared on aluminum-silicon alloys

Tribology International

DOI

2018

Effects of cutting parameters and tool nose radius on surface roughness and work hardening during dry turning Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI

2018

Edge passivation and quality of carbide cutting inserts treated by wet micro-abrasive blasting

The International Journal of Advanced Manufacturing Technology

DOI

2018

Investigations on tool temperature with heat conduction and heat convection in high-speed slot milling of Ti6Al4V

The International Journal of Advanced Manufacturing Technology

DOI

2018

Modeling of plastic deformation induced by thermo-mechanical stresses considering tool flank wear in high-speed machining Ti-6Al-4V

International Journal of Mechanical Sciences

DOI

2018

The micro-cutting performance of cermet and coated WC micro-mills in machining of TC4 alloy micro-grooves

The International Journal of Advanced Manufacturing Technology

DOI

2018

Study on cutting burr and tool failure during high-speed milling of compacted graphite iron by the coated carbide tool

The International Journal of Advanced Manufacturing Technology

DOI

2018

Tool wear behaviors and corresponding machined surface topography during high-speed machining of Ti-6Al-4V with fine grain tools

Tribology International

DOI

2018

Incorporation of antibacterial ions on the micro/nanostructured surface and its effects on the corrosion behavior of titanium

Materials Letters

DOI

2018

The Effects of Machining-induced Surface Topography on Fatigue Performance of Titanium Alloy Ti-6Al-4V

Procedia CIRP

DOI

2018

Analyzing the performance of self-developed cermet micro end mills in machining of TC4 alloy micro-grooves

Procedia CIRP

DOI

2018

Dynamic Response and Parametric Analysis of Geometrically Nonlinear Functionally Graded Plate With Arbitrary Constraints Under Moving Mass

IEEE Access

DOI

2017

钛合金TC4低塑性滚压表面完整性的实验研究

《华南理工大学学报(自然科学版)》

2017

基于hyperMILL的半开式整体叶轮五轴数控编程与加工技术

《组合机床与自动化加工技术》

2017

基于柔度耦合子结构法的主轴-卡盘与工件结合面参数辨识

《机床与液压》

2017

整体叶盘铣削数控编程与加工技术

《航空制造技术》

2017

Feasibility study of taking high-speed dry milling as the final manufacturing process by the standard of service performance

The International Journal of Advanced Manufacturing Technology

DOI

2017

Modification of surface morphology to enhance tribological properties for CVD coated cutting tools through wet micro-blasting post-process

Ceramics International

DOI

2017

Parametric study of dynamic response of sandwich plate under moving loads

Thin-Walled Structures

DOI

2017

Crack-healing behavior of Al2O3-TiB2-TiSi2 ceramic material

Ceramics International

DOI

2017

Fabrication of an orderly micro/nanostructure on titanium surface and its effect on cell proliferation

Materials Letters

DOI

2017

Mechanical properties and microstructure of Al2O3-TiB2-TiSi2 ceramic tool material

Ceramics International

DOI

2017

The modified surface properties and fatigue life of Incoloy A286 face-milled at different cutting parameters

Materials Science and Engineering A

DOI

2017

Investigation the effect of strain history on crystallographic texture evolution based on the perspective of macro deformation for high speed machining Ti-6Al-4V

Materials Characterization

DOI

2017

Surface Functionalization of Micro/Nanostructured Titanium with Bioactive Ions to Regulate the Behaviors of Murine Osteoblasts

Advanced Engineering Materials

DOI

2017

Effects of micro-milled malposed dimple structures on tribological behavior of Al-Si alloy under droplet lubricant condition

The International Journal of Advanced Manufacturing Technology

DOI

2017

Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V

The International Journal of Advanced Manufacturing Technology

DOI

2017

A novel stability prediction approach for thin-walled component milling considering material removing process

Chinese Journal of Aeronautics

DOI

2017

A generalized cutting force model for five-axis milling processes

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2017

On sustainable manufacturing of Cr-Ni alloy coatings by laser cladding and high-efficiency turning process chain and consequent corrosion resistance

Journal of Cleaner Production

DOI

2017

Microstructure of spherical particles generated in high-speed machining of an alloy steel

International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde)

DOI

2017

Formulating a numerically low-cost method of a constrained layer damper for vibration suppression in thin-walled component milling and experimental validation

International Journal of Mechanical Sciences

DOI

2017

Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy

Journal of Manufacturing Processes

DOI

2017

Determination of minimum uncut chip thickness during micro-end milling Inconel 718 with acoustic emission signals and FEM simulation

The International Journal of Advanced Manufacturing Technology

DOI

2017

Construction and characterization of micro/nano-topography on titanium alloy formed by micro-milling and anodic oxidation

The International Journal of Advanced Manufacturing Technology

DOI

2017

Cutting characteristics of porcine tenderloin tissue along tangential direction of surface

The International Journal of Advanced Manufacturing Technology

DOI

2017

Effects of dimensional size and surface roughness on service performance for a micro Laval nozzle

Journal of Micromechanics and Microengineering

DOI

2017

Partial Surface Damper to Suppress Vibration for Thin Walled Plate Milling

Chinese Journal of Mechanical Engineering

DOI

2017

Plastic deformation and critical condition for orthogonal machining two-layered materials with laser cladded Cr-Ni-based stainless steel onto AISI 1045

Journal of Cleaner Production

DOI

2017

Enhancing surface integrity and corrosion resistance of laser cladded Cr–Ni alloys by hard turning and low plasticity burnishing

Applied Surface Science

DOI

2017

Stress-induced orientation relationship variation for phase transformation of α -Ti to β -Ti during high speed machining Ti-6Al-4V

Materials Science and Engineering A

DOI

2017

Swept Mechanism of Micro-Milling Tool Geometry Effect on Machined Oxygen Free High Conductivity Copper (OFHC) Surface Roughness

Materials

DOI

2017

Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy

Materials & Design

DOI

2017

Vibration analysis of functionally graded plate with a moving mass

Applied Mathematical Modelling

DOI

2017

Investigation on size effect of specific cutting energy in mechanical micro-cutting

The International Journal of Advanced Manufacturing Technology

DOI

2017

Corrosion Behavior of Titanium Implant with different Surface Morphologies

Procedia Manufacturing

DOI

2017

Surface polish of PLA parts in FDM using dichloromethane vapour

MATEC Web of Conferences

DOI

2017

Dynamic Deformation of Thin-walled Plate with Variable Thickness under Moving Milling Force

Procedia CIRP

DOI

2016

约束阻尼型镗杆的优化及减振性能

《航空学报》

2016

涂层刀具切削淬硬H13模具钢的切削性能研究

《工具技术》

2016

加强刀具技术研究 提高制造业竞争力——访国家杰出青年科学基金获得者,山东大学机械工程学院教授刘战强

《航空制造技术》

2016

难加工材料切削用量可优化区间的限定

《航空制造技术》

2016

高速切削Ti-6Al-4V绝热剪切带应变、应变率有限元模拟研究

《现代制造工程》

2016

旋转超声滚压加工中的滚压力与滚压深度及表面形貌研究

《兵工学报》

2016

三齿轮微泵设计与微Logix齿轮的铣削加工

《现代制造工程》

2016

高效切削与高完整性加工技术

《航空制造技术》

2016

镍基合金Inconel 718薄壁件铣削加工数控程序和切削参数优化

《机床与液压》

2016

基于UG二次开发技术的PDM/CAM集成方法研究

《机床与液压》

2016

材料动态性能对高速切削切屑形成的影响规律

《中国科学:技术科学》

2016

Construction of a bioactive surface with micro/nano-topography on titanium alloy by micro-milling and alkali-hydrothermal treatment

Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine

DOI

2016

On the segmentation-driven vibration in milling titanium alloy

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2016

Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties

Journal of Materials Processing Technology

DOI

2016

Development of constrained layer damping toolholder to improve chatter stability in end milling

International Journal of Mechanical Sciences

DOI

2016

Surface integrity and fatigue performance of 17-4PH stainless steel after cutting operations

Surface and Coatings Technology

DOI

2016

A time-space discretization method in milling stability prediction of thin-walled component

The International Journal of Advanced Manufacturing Technology

DOI

2016

Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machining

Materials Science and Engineering A

DOI

2016

Dynamic analysis of rectangular thin plates of arbitrary boundary conditions under moving loads

International Journal of Mechanical Sciences

DOI

2016

Quantification of Microstructural Features and Prediction of Mechanical Properties of a Dual-Phase Ti-6Al-4V Alloy

Materials

DOI

2016

Modeling and prediction for 3D surface topography in finish turning with conventional and wiper inserts

Measurement

DOI

2016

Fabrication of hierarchical micro/nanotopography on bio-titanium alloy surface for cytocompatibility improvement

Journal of Materials Science

DOI

2016

An analytical model for the prediction of temperature distribution and evolution in hybrid laser-waterjet micro-machining

Precision Engineering

DOI

2016

Synergistic effects of bioactive ions and micro/nano-topography on the attachment, proliferation and differentiation of murine osteoblasts (MC3T3)

Journal of Materials Science Materials in Medicine

DOI

2016

Investigations of ultrasonic frequency effects on surface deformation in rotary ultrasonic roller burnishing Ti-6Al-4V

Materials & Design

DOI

2016

Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy

CIRP journal of manufacturing science and technology

DOI

2016

Characterisation of thrust performance of micro-nozzle machined by micro end-milling

Strathprints: The University of Strathclyde institutional repository (University of Strathclyde)

2016

Method of strain-rate difference calculation in high-speed metal cutting

Measurement

DOI

2016

Influence of machined surface roughness on thrust performance of micro-nozzle manufactured by micro-milling

Experimental Thermal and Fluid Science

DOI

2016

Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining of 7050-T7451 aluminum alloy

Journal of Cleaner Production

DOI

2016

Physical-mechanical and electrochemical corrosion behaviors of additively manufactured Cr-Ni-based stainless steel formed by laser cladding

Materials & Design

DOI

2016

Instability of internal damping due to collet chuck holder for rotating spindle–holder–tool system

Mechanism and Machine Theory

DOI

2016

Fabrication of micro/nano-textured titanium alloy implant surface and its influence on hydroxyapatite coatings

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2016

Effects of Superimposed Micro/Nano‐Structured Titanium Alloy Surface on Cellular Behaviors In Vitro

Advanced Engineering Materials

DOI

2016

Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V

Materials & Design

DOI

2016

Frequency-domain stability lobe prediction for high-speed face milling process under tool–workpiece dynamic interaction

Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture

DOI

2016

Hybrid modeling with finite element and statistical methods for residual stress prediction in peripheral milling of titanium alloy Ti-6Al-4V

International Journal of Mechanical Sciences

DOI

2016

Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718

The International Journal of Advanced Manufacturing Technology

DOI