彭鹏｜重庆科技学院｜学者主页

2026

碳捕集与碳中和技术的演进与发展趋势

谷浩宇，彭鹏，王国强

《张江科技评论》

2026

原位观察分析奥氏体化对Co-Cr-Mo合金马氏体相变的影响（英文）

李彦朋，徐远丽，彭鹏，张旭东，马智锟

Transactions of Nonferrous Metals Society of China

2024

高成形镁合金板材最新研究进展

杨青山，颜宏伟，彭鹏，蒋斌，潘复生

《稀有金属》

2024

炉腹煤气量指数和透气阻力系数在马钢2号高炉的应用

尤石，高鹏，王志堂，彭鹏，梁晨，吴示宇

《炼铁》

2023

马钢1号高炉区域热负荷监测及应用

吴示宇，左俊，吴宏亮，侯军，彭鹏

《炼铁》

2022

Numerical study of PCM thermal behavior of a novel PCM-heat pipe combined system for Li-ion battery thermal management

Peng Peng, Yiwei Wang, F. Jiang

Applied Thermal Engineering

DOI

2021

马钢3号高炉低燃料比操作技术研究

彭鹏，高广静，陈军，余长有，王平

《炼铁》

2021

A novel entropy-based fault diagnosis and inconsistency evaluation approach for lithium-ion battery energy storage systems

Yishu Qiu, Wenjiong Cao, Peng Peng, F. Jiang

DOI

2020

MoO3/CNTs Loading in Separator for Performance-Improving Current-Collector-Free Lithium Ion Batteries

Peng Peng, Jie-Wei Chen, Kai Niu, Zhuohai Liu, Hao Huang, Yu-Peng Zheng, Le-Hao Liu, Li-Hua Chu, Mei-Cheng Li

DOI

2020

Experimental study on a novel compact cooling system for cylindrical lithium-ion battery module

Yi-Wei Wang, Peng Peng, Wenjiong Cao, Ti Dong, Yao-Dong Zheng, B. Lei, You-Jie Shi, F. Jiang

DOI

2020

Ponderation over the recent safety accidents of lithium-ion battery energy storage stations in South Korea

Wenjiong Cao, B. Lei, You-Jie Shi, Ti Dong, Peng Peng, Yao-Dong Zheng, F. Jiang

DOI

2020

A full-scale electrical-thermal-fluidic coupling model for li-ion battery energy storage systems

Wenjiong Cao, Yishu Qiu, Peng Peng, F. Jiang

DOI

2020

Experimental investigation of the laminar flow and heat transfer performance of a harmonica tube with or without mini-fins

Yi-Wei Wang, Ti Dong, Wenjiong Cao, Peng Peng, F. Jiang

DOI

2019

激光冲击强化对TC17钛合金微观组织及拉伸性能的影响

孙汝剑，李刘合，朱颖，彭鹏，张利新，于文花，郭伟

《稀有金属材料与工程》

2019

马钢4号高炉保稳顺提煤比生产实践

陈军，王志堂，聂长果，赵淑文，彭鹏

《炼铁》

2019

Electrical‐thermal behaviors of a cylindrical graphite‐NCA Li‐ion battery responding to external short circuit operation

Ti Dong, Yi-Wei Wang, Peng Peng, F. Jiang

International Journal of Energy Research

DOI

2018

Numerical modeling and analysis of the thermal behavior of NCM lithium-ion batteries subjected to very high C-rate discharge/charge operations

Ti Dong, Peng Peng, F. Jiang

DOI

2017

Al-6.3CuAC-GTAW电弧增材成形的气孔控制

从保强，孙红叶，彭鹏，齐铂金，赵罡，丁佳洛

《稀有金属材料与工程》

2017

DP980激光焊接温度场模拟及力学性能

贾强，郭伟，彭鹏，朱颖，邹贵生

《稀有金属材料与工程》

2017

电子束偏转扫描对TC18钛合金组织、硬度和作用深度的影响（英文）

张伟，祁泽武，彭鹏，许海鹰，齐铂金

《稀有金属材料与工程》

2016

Elucidating the Performance Limitations of Lithium-ion Batteries due to Species and Charge Transport through Five Characteristic Parameters

F. Jiang, Peng Peng

Scientific Reports

DOI

2016

Thermal safety of lithium-ion batteries with various cathode materials: A numerical study

Peng Peng, F. Jiang

DOI

2016

Spherical or sphere-like lithium battery cathode material, battery and manufacturing method and application

Chao-Yi Zhou, Li-Juan Wang, Z. Yin, Da-Xiang Yang, Qian-Xin Xiang, Ming Mei, Peng Peng

2015

马钢3号高炉炉况失常的处理

聂长果，彭鹏，王志堂

《炼铁》

2015

Direct numerical simulation modeling of multidisciplinary transport during lithium-ion battery charge/discharge processes

F. Jiang, Jian-Bang Zeng, Peng Peng, Shao-Yang He

DOI

2015

Improvement of lithium storage performance of Sn-alloy anode materials by a polypyrrole protective layer

Peng Peng, Z. Wen, Yu Liu, Jun Jin

DOI

2015

Thermal management system of electromobile power battery pack

Fang-Ming Jiang, J. Cen, Zhi-Bin Li, Peng Peng

2015

Enhanced performance of lithium sulfur battery with self-assembly polypyrrole nanotube film as the functional interlayer

Guo-Qiang Ma, Z. Wen, Qing-Song Wang, Chen Shen, Peng Peng, Jun Jin, Xiang-Wei Wu

DOI

2015

Thermal behavior analyses of stacked prismatic LiCoO2 lithium-ion batteries during oven tests

Peng Peng, F. Jiang

DOI

2014

Effects of Mesoporous Co3O4 on Electrochemical Properties of Lithium/Sulfur Battery

Guo-Qiang Ma, Z. Wen, Jun Jin, Peng Peng, Qing-Song Wang

DOI

2014

Synthesis of Carbon-Encapsulated SnO2 Nanoparticles as Anode Material with Superior Cyclability for Lithium Ion Batteries

Peng Peng, Z. Wen, Yu Liu

DOI

2014

Thermal analyses of LiCoO2 lithium-ion battery during oven tests

Peng Peng, Yiqiong Sun, F. Jiang

Heat and Mass Transfer

DOI

2014

Synthesis and performance of apple-like tin oxide as anode for Li-ion batteries

Peng Peng, Z. Wen, Yu Liu, Yan Lu, Meifen Wu, Jun Jin, Cai Liu, Guo-Qiang Ma

DOI

2014

Green and low-cost water system sodium ion battery

Yu Liu, Jian He, Peng Peng

2014

Numerical simulations and thermal behavior analysis for oven thermal abusing of LiCoO_2 lithium-ion battery

Peng Peng

2014

Direct Numerical Simulation Modeling of Multidisciplinary Transport During Li-Ion Battery Charge/Discharge Processes

F. Jiang, Jian-Bang Zeng, Wei Wu, Peng Peng

DOI

2014

Scalable synthesis of Si nanostructures by low-temperature magnesiothermic reduction of silica for application in lithium ion batteries

Xin-Ling Liu, Yan-Feng Gao, Ren-Hua Jin, Hong-Jie Luo, Peng Peng, Yu Liu

DOI

2014

Improvement of Electrochemical Performance of SnO_2 Anode by Polypyrrole with Different Morphologies

Peng Peng

2013

定向凝固Al-12%Ni过共晶合金组织演化

彭鹏，李新中，刘冬梅，苏彦庆，郭景杰，傅恒志

《金属学报》

2013

Electrochemical Performance of Silicon/Carbon/Graphite Composite Anode for Lithium Ion Batteries

Peng Peng

2013

Thermal analyses of LiFePO4/graphite battery discharge processes

F. Jiang, Peng Peng, Yiqiong Sun

DOI

2012

挤轧复合变形制备电磁连铸AZ61板材

李乃朴，孟令刚，房灿峰，朱琼，吴友芳，彭鹏，张兴国

《材料科学与工艺》

2012

铸态Mg-Sn-Zn-Al合金组织性能

吴友芳，孟令刚，房灿峰，朱琼，李乃朴，王宇，彭鹏，张兴国

《稀有金属材料与工程》

2012

Positive pole composite system of lithium sulphur battery containing catalytic additive

Zhao-Yin Wen, Guo-Qiang Ma, Jun Jin, Yan-Ming Cui, Jingchao Zhang, Xiang-Wei Wu, Meifen Wu, Peng Peng

2010

单机架冷轧机全干扰耦合模型的建立与分析

孙文权，杨荃，彭鹏，王晓晨，孙浩

《钢铁》

2009

宽带钢热连轧机动态板形控制策略的研究与应用

彭鹏，杨荃，何安瑞

《钢铁》

2009

定向凝固Ti-50Al合金组织演化及其片层取向控制

李新中，孙涛，彭鹏，苏彦庆，郭景杰，傅恒志

《金属学报》

2008

宽带钢冷连轧机分步解耦控制系统

彭鹏，杨荃

《钢铁研究学报》

2007

冷连轧机板形板厚综合解耦控制系统

彭鹏，杨荃

《钢铁》

2005

四氯乙烯在锌精矿浸出中的作用研究

彭鹏，谢慧琴，卢立柱

《矿冶工程》

2004

锌精矿的浸出与萃取硫磺的耦合

彭鹏，谢慧琴，卢立柱

《矿冶》

2004

Effect of Tetrachloroethylene on Sphalerite Leaching

王兴尧，彭鹏，谢慧琴，卢立柱

《过程工程学报》

2004

软锰矿中二氧化锰含量的快速滴定

周方钦，彭美春，黄刚，彭鹏

《冶金分析》

精选作品

期刊论文

碳捕集与碳中和技术的演进与发展趋势

原位观察分析奥氏体化对Co-Cr-Mo合金马氏体相变的影响（英文）

高成形镁合金板材最新研究进展

炉腹煤气量指数和透气阻力系数在马钢2号高炉的应用

马钢1号高炉区域热负荷监测及应用

Numerical study of PCM thermal behavior of a novel PCM-heat pipe combined system for Li-ion battery thermal management

马钢3号高炉低燃料比操作技术研究

A novel entropy-based fault diagnosis and inconsistency evaluation approach for lithium-ion battery energy storage systems

MoO3/CNTs Loading in Separator for Performance-Improving Current-Collector-Free Lithium Ion Batteries

Experimental study on a novel compact cooling system for cylindrical lithium-ion battery module

Ponderation over the recent safety accidents of lithium-ion battery energy storage stations in South Korea

A full-scale electrical-thermal-fluidic coupling model for li-ion battery energy storage systems

Experimental investigation of the laminar flow and heat transfer performance of a harmonica tube with or without mini-fins

激光冲击强化对TC17钛合金微观组织及拉伸性能的影响

马钢4号高炉保稳顺提煤比生产实践

Electrical‐thermal behaviors of a cylindrical graphite‐NCA Li‐ion battery responding to external short circuit operation

Numerical modeling and analysis of the thermal behavior of NCM lithium-ion batteries subjected to very high C-rate discharge/charge operations

Al-6.3CuAC-GTAW电弧增材成形的气孔控制

DP980激光焊接温度场模拟及力学性能

电子束偏转扫描对TC18钛合金组织、硬度和作用深度的影响（英文）

Elucidating the Performance Limitations of Lithium-ion Batteries due to Species and Charge Transport through Five Characteristic Parameters

Thermal safety of lithium-ion batteries with various cathode materials: A numerical study

Spherical or sphere-like lithium battery cathode material, battery and manufacturing method and application

马钢3号高炉炉况失常的处理

Direct numerical simulation modeling of multidisciplinary transport during lithium-ion battery charge/discharge processes

Improvement of lithium storage performance of Sn-alloy anode materials by a polypyrrole protective layer

Thermal management system of electromobile power battery pack

Enhanced performance of lithium sulfur battery with self-assembly polypyrrole nanotube film as the functional interlayer

Thermal behavior analyses of stacked prismatic LiCoO2 lithium-ion batteries during oven tests

Effects of Mesoporous Co3O4 on Electrochemical Properties of Lithium/Sulfur Battery

Synthesis of Carbon-Encapsulated SnO2 Nanoparticles as Anode Material with Superior Cyclability for Lithium Ion Batteries

Thermal analyses of LiCoO2 lithium-ion battery during oven tests

Synthesis and performance of apple-like tin oxide as anode for Li-ion batteries

Green and low-cost water system sodium ion battery

Numerical simulations and thermal behavior analysis for oven thermal abusing of LiCoO_2 lithium-ion battery

Direct Numerical Simulation Modeling of Multidisciplinary Transport During Li-Ion Battery Charge/Discharge Processes

Scalable synthesis of Si nanostructures by low-temperature magnesiothermic reduction of silica for application in lithium ion batteries

Improvement of Electrochemical Performance of SnO_2 Anode by Polypyrrole with Different Morphologies

定向凝固Al-12%Ni过共晶合金组织演化

Electrochemical Performance of Silicon/Carbon/Graphite Composite Anode for Lithium Ion Batteries

Thermal analyses of LiFePO4/graphite battery discharge processes

挤轧复合变形制备电磁连铸AZ61板材

铸态Mg-Sn-Zn-Al合金组织性能

Positive pole composite system of lithium sulphur battery containing catalytic additive

单机架冷轧机全干扰耦合模型的建立与分析

宽带钢热连轧机动态板形控制策略的研究与应用

定向凝固Ti-50Al合金组织演化及其片层取向控制

宽带钢冷连轧机分步解耦控制系统

冷连轧机板形板厚综合解耦控制系统

四氯乙烯在锌精矿浸出中的作用研究

锌精矿的浸出与萃取硫磺的耦合

Effect of Tetrachloroethylene on Sphalerite Leaching

软锰矿中二氧化锰含量的快速滴定

会议论文

马钢1号高炉精准控制下的开炉实践

基于ProCast的高炉铜冷却壁埋管铸造工艺优化研究

马钢1000m 3 高炉高压气体检漏技术实践

利用Aosps4.0精益生产优化分析软件技术提升长钢1号高炉炼铁技术指标

河北中钢八辊冷连轧机压下控制系统