刘桂雄

期刊论文

1. 陈晓曼，刘桂雄（2026）. PMH-YOLOv11n：一种面向微缺陷的PCB检测方法. 《中国测试》.
2. 黄琛淏，刘桂雄，林壮敦，袁武飞，吴海泓（2026）. 南部沿海炼化装置腐蚀速率TL-BiLSTM-Attention智能预测. 《电子测量技术》.
3. 江炫龙，刘桂雄，李秀水（2026）. 钢化玻璃碎片图像分割CH+EfficientVit-Rsprompter方法研究. 《中国测试》.
4. 顾慧芝，刘桂雄（2026）. Ω型科氏流量计结构参数对测量性能影响分析. 《中国测试》.
5. 陈晓曼，刘桂雄（2026）. 智能PCB缺陷检测可视化信息系统设计. 《现代信息科技》.DOI
6. 邹佳明，刘桂雄，黎文富（2026）. 航空发动机涡轮叶片表面缺陷内窥视觉SH+YOLOv8检测识别研究. 《中国测试》.
7. 江炫龙，刘桂雄，李秀水（2026）. 面向大图像碎片分割的半监督自训练方法. 《激光杂志》.DOI
8. Guilong Chen, Guixiong Liu, Weili Luo (2026). ProCoS: Degradation-Robust Manipulation Localization for Special Equipment Inspection Images. Sensors.DOI
9. Yipu Yan, Guixiong Liu, Jing Xu (2026). GPGA: Mixture of gaussian prompt geometric adjustment for zero-shot industrial anomaly detection. Journal of King Saud University - Computer and Information Sciences.DOI
10. Guocai Zhang, Guixiong Liu, Fei Zhong (2026). Structure Prior Anchoring and Symmetry Awareness for Oriented Object Detection in X-Ray Inspection of Compression Fittings. IEEE Access.DOI
11. Wei Deng, Guixiong Liu, Jing Xu (2026). A Key-Operator-Topology-Preserving Compression Framework for Endoscopic Microdefect Detection Models of Aeroengine Turbine Blades. IEEE Transactions on Instrumentation and Measurement.DOI
12. 汪灵姿，刘桂雄，张国才，钟飞（2025）. 应用VA-UNet的DR图像缺陷分割与评定方法. 《电子测量技术》.DOI
13. 罗伟立，陈贵龙，刘桂雄，陈建勋（2025）. 电梯检验视频的缓冲器行为AI跟踪判定方法研究. 《现代信息科技》.
14. 闫奕樸，刘桂雄，邢星奥（2025）. 工业异常检测大模型方法研究进展. 《中国测试》.
15. 何振华，刘桂雄，黎文富（2025）. 面向航空发动机涡轮叶片表面缺陷的Swin-DCUnet分割及评估方法. 《电子测量技术》.DOI
16. 陈彦彬，刘桂雄（2025）. 双线性自注意力机制CAN总线入侵检测方法研究. 《电子测量技术》.DOI
17. 张嘉龙，刘桂雄，周善龙（2025）. 基于ERH-Stereo立体匹配PCBA元件高度测量算法. 《激光杂志》.DOI
18. 刘桂雄，闫奕樸，陈贵龙，邢星奥（2025）. 提升零样本工业异常检测方法泛化性的属性无关提示学习分析. 《激光杂志》.DOI
19. 陈浚铿，刘桂雄，谢方静（2025）. 既有办公建筑光伏发电预测的SSA-LSTM方法研究. 《电子测量技术》.DOI
20. 罗伟立，陈贵龙，刘桂雄，陈建勋（2025）. 半监督YOLO在电梯检验视频合规性审查的应用. 《自动化与信息工程》.
21. 刘桂雄，邢星奥，黎文富，闫奕樸（2025）. DetectGPT:无标签特征互打分机制的无监督工业异常检测方法. 《中国测试》.
22. Wei Deng, Guixiong Liu, Jun Meng (2025). Study on Novel Surface Defect Detection Methods for Aeroengine Turbine Blades Based on the LFD-YOLO Framework. Sensors.DOI
23. 林泓，刘桂雄，戈燕红，崔怀丰（2024）. 单变量时间序列的MHAGRU-MCCE分类方法. 《电子测量技术》.
24. 钟飞，康铱潇，张国才，刘桂雄（2024）. 架空输电线压缩型耐张线夹接续故障分析及无损检测方法. 《自动化与信息工程》.
25. 刘桂雄，闫奕樸，邢星奥（2024）. 视觉表面缺陷无监督学习检测方法研究进展. 《中国测试》.
26. 李远茂，刘桂雄（2024）. 动力锂离子电池关键参数估计方法研究进展. 《中国测试》.
27. 陈浚铿，刘桂雄，谢方静，吴叠恩（2024）. 光伏发电系统运行数据时间序列补齐与降维方法研究. 《中国测试》.
28. 曹国群，刘桂雄，周善龙（2024）. 线缆掩膜中心线代数化重建弯曲半径计算方法. 《激光杂志》.
29. 黄春荣，刘桂雄，戈燕红，闵文傲，郭德音（2024）. 应用GA-RBFNN全光谱水体COD与NO3-N检测方法研究. 《中国测试》.
30. 汪灵姿，刘桂雄，钟飞，张国才（2024）. 应用EW+YOLOv8耐张线夹DR图像缺陷检测识别技术. 《激光杂志》.
31. Guocai Zhang, Guixiong Liu, Fei Zhong (2024). Research on UAV Autonomous Recognition and Approach Method for Linear Target Splicing Sleeves Based on Deep Learning and Active Stereo Vision. Electronics.DOI
32. Jiaxi Huang, Guixiong Liu (2024). An Improved Generative Adversarial Network-Based and U-Shaped Transformer Method for Glass Curtain Crack Deblurring Using UAVs. Sensors.DOI
33. Jiaxi Huang, Guixiong Liu (2024). An iterative up-sampling convolutional neural network for glass curtain crack detection using unmanned aerial vehicles. Journal of Building Engineering.DOI
34. Yuanmao Li, Guixiong Liu, Wei Deng, Zuyu Li (2024). Comparative study on parameter identification of an electrochemical model for lithium-ion batteries via meta-heuristic methods. Applied Energy.DOI
35. Guixiong Liu, Yipu Yan, Joe Meng (2024). Study on the detection technology for inner-wall outer surface defects of the automotive ABS brake master cylinder based on BM-YOLOv8. Measurement Science and Technology.DOI
36. 刘桂雄，廖普，杨宁祥（2023）. 基于深度学习主动视觉压力容器焊缝质量参数检测方法. 《仪器仪表学报》.DOI
37. 宇岩，王春明，汤正午，刘桂雄，邱丹逸，朱妍，祝林，万晶晶，黄怡淳，徐玉霞（2023）. 精密仪器设备产业“卡脖子”技术及标准现状与策略研究. 《中国标准化》.
38. 宋家骏，刘桂雄，黄家曦，张国才（2023）. 应用U-HRNet+SoftTripleLoss的HiFi-Net伪造图像检测技术研究. 《中国测试》.
39. 高泽铭，刘桂雄，陈国宇（2023）. 家用燃气表外观缺陷的改进ViT+FastFlow检测方法研究. 《电子测量与仪器学报》.
40. 刘桂雄，肖天歌，陈国宇，黄坚（2023）. 基于MVSNet多视角立体深度学习的储罐在位体积测量方法研究. 《中国测试》.
41. 姚懋欣，刘桂雄，陈国宇（2023）. 燃气表计量检定线首次检定调度技术研究. 《电子测量技术》.
42. 曹国群，刘桂雄（2023）. 基于双模态融合的线缆图像语义分割方法研究. 《电子测量技术》.
43. 高泽铭，刘桂雄，陈国宇，黄坚（2023）. 基于ViT燃气表外观零件识别与定位方法研究. 《电子测量技术》.
44. 廖普，刘桂雄，杨宁祥（2023）. 基于知识蒸馏KD压力容器焊缝参数特征点提取实时性提升方法. 《激光杂志》.
45. 黄春荣，刘桂雄，戈燕红，郭德音（2023）. 水质监测仪光伏系统的优化配置与能量调度研究. 《国外电子测量技术》.
46. Yuanmao Li, Guixiong Liu, Wei Deng (2023). A Novel Method for State of Charge Estimation in Lithium-Ion Batteries Using Temporal Convolutional Network and Multi-Verse Optimization. Batteries.DOI
47. 张迎春，刘桂雄（2022）. 发挥科技社团优势，培养高技能人才（一）——组织制订《仪器仪表制造工国家职业技能标准》. 《现代信息科技》.
48. 张迎春，刘桂雄（2022）. 发挥科技社团优势，培养高技能人才(二)——组织举办仪器仪表制造工国家级一类比赛赛项. 《现代信息科技》.
49. 刘桂雄，黄坚（2022）. 基于标签预留Softmax算法的机器视觉检测鉴别语义分割迁移学习技术. 《光学精密工程》.
50. 刘少昱，臧春华，谢佳娜，刘桂雄（2022）. 论先进制造业产品与技术系列团体标准制定与实践. 《现代信息科技》.
51. 李伟，刘桂雄，曾成刚（2022）. 基于实例分割+CCTV排水管道缺陷检测方法研究. 《电子测量技术》.
52. 汤少敏，刘桂雄，李小兵（2022）. 基于RBF神经网络的Bootstrap数据扩充方法及其在IRSS可靠性估计中的应用. 《中国测试》.
53. 江境宏，明志茂，赵可沦，刘桂雄（2022）. 动力电池系统检测评价标准体系探讨与检测关键技术分析. 《电子测量技术》.
54. 姚懋欣，刘桂雄，梁敏健（2022）. 基于LSTM特征提取的电梯液压缓冲器隐患识别方法. 《中国测试》.
55. 刘少昱，臧春华，林镇秋，刘桂雄（2022）. 论电子产品自动化测试线团体标准的制定与实践. 《现代信息科技》.
56. 谢振宇，谢佳娜，刘桂雄（2022）. 基于RMxprt换向偏转角调整PMDC性能影响研究. 《电子测量技术》.
57. 谢振宇，刘桂雄，谢佳娜（2022）. 永磁直流电机换向偏转角优化选配技术. 《国外电子测量技术》.
58. 李泓沛，刘桂雄，邓威（2022）. 基于LSTM+UKF融合的动力锂电池SOC估算方法. 《中国测试》.
59. 陈韬文，宋家骏，彭湘安，刘桂雄（2022）. 心电图ECG信号自动检测特征提取方法研究进展. 《电子测量技术》.
60. 李泓沛，刘桂雄，邓威（2022）. 动态工况模拟下动力锂电池建模与参数辨识方法. 《电子测量技术》.
61. 蔡家富，刘桂雄（2022）. 动力锂电池模组多工位多电性能参数测试调度方法研究. 《中国测试》.
62. Yuanmao Li, Guixiong Liu, Zuyu Li (2022). Numerical modeling of thermal runaway in high-energy lithium-ion battery packs induced by multipoint heating. Case Studies in Thermal Engineering.DOI
63. Shao-Min Tang, Guixiong Liu, Xiaobing Li (2022). Reliability Evaluation Method of Pseudo-failure Life Distribution for Industrial Robot Servo System Based on The Generalized Lambda Distribution. Journal of Physics, Conference Series.DOI
64. Pu Liao, Guixiong Liu, Ningxiang Yang (2022). Method for inspection the surface quality parameters of pressure vessel welds. Cloud Computing and Mechatronic Engineering.DOI
65. Pu Liao, Guixiong Liu (2022). Pressure vessel-oriented visual inspection method based on deep learning. PLoS ONE.DOI
66. 刘少昱，刘桂雄（2021）. 科技社团开展团体标准制定实践——以测控仪器行业为例. 《现代信息科技》.DOI
67. 马健，赵迪，李杰业，刘桂雄（2021）. 基于K-means算法的堆叠砝码检定顺序调度规划方法. 《现代信息科技》.DOI
68. 李泓沛，刘桂雄（2021）. 加窗LSTM网络的动力电池SOC预测优化算法. 《中国测试》.
69. 李伟，刘桂雄（2021）. 电化学与热滥用耦合模型的锂电池局部热扩散仿真试验技术. 《中国测试》.
70. 邓威，刘桂雄，黄坚，马健（2021）. 面向堆叠千克组砝码的砝码把手实时识别与空间定位技术. 《电子测量技术》.
71. 陈友升，周介祺，梁敏健，张大伟，刘桂雄（2021）. 基于YOLOv5视觉感知的实时叉车驾驶操作行为识别方法. 《自动化与信息工程》.
72. 蔡柳依婷，梁敏健，刘桂雄（2021）. 面向荧光渗透检测的小型管件图像展开拼接方法. 《自动化与信息工程》.
73. Yu Zhang, Guixiong Liu, Da-Qiang Deng (2021). Simulation study of local thermal runaway of 18650 lithium battery module under multi-point thermal trigger. E3S Web of Conferences.DOI
74. Jinghong Jiang, Zhi-mao Ming, Guixiong Liu, Ke-Lun Zhao (2021). Capacity and energy test analysis of lithium-ion traction battery pack for high energy applications. Other Conferences.DOI
75. Yuan-Mao Li, Guixiong Liu, Yu Zhang (2021). Research on fuzzy security evaluation of power battery system with thermal runaway test by GRA and entropy method. Other Conferences.DOI
76. Mingsheng Chen, Gui-Ting Xie, Zhi-mao Ming, Guixiong Liu, Wei Li (2021). Functional safety research of battery management system based on risk graph methods.DOI
77. Pu Liao, Guixiong Liu, Ningxiang Yang (2021). Estimation of Arc Welding Pressure Pipeline Weld Peaking Parameters Based on Data Prediction. Mathematical Problems in Engineering.DOI
78. Chunhua Zang, Jiajun Song, Taowen Chen, Guixiong Liu (2021). Design of image acquisition system of online verification device for ship engine spare parts packing. International Conference on Mechanical Engineering, Measurement Control, and Instrumentation.DOI
79. Di Zhao, Jian Ma, Wenbin Yu, Guixiong Liu (2021). Multi-modal sensing positioning technology for intelligent verification of stacked kilogram weights. International Conference on Mechanical Engineering, Measurement Control, and Instrumentation.DOI
80. Baitian Ouyang, Fushen Cai, Jiafu Cai, Guixiong Liu (2021). Design of a fast on-line measurement device for deflection of assembly car body based on wireless laser sensing. International Conference on Mechanical Engineering, Measurement Control, and Instrumentation.DOI
81. Jian Ma, Linlin Guo, Di Zhao, Guixiong Liu (2021). Development of intelligent verification system for stacked kilogram weights. International Conference on Mechanical Engineering, Measurement Control, and Instrumentation.DOI
82. Shaomin Tang, Guixiong Liu, Wei Deng, Xiaobing Li (2021). Hardware-in-the-loop simulation for the service performance testing of industrial robot servo systems.DOI
83. Jian Feng Huang, Guixiong Liu, Binyuan He (2021). Fast semantic segmentation method for machine vision inspection based on a fewer-parameters atrous convolution neural network. PLoS ONE.DOI
84. 韩晗，谢振宇，刘桂雄（2020）. 基于LabVIEW+MATLAB动车组牵引估算仿真平台开发. 《自动化与仪器仪表》.DOI
85. 刘桂雄，陈明华，刘少昱（2020）. 培育发展广东省精密仪器设备产业集群的思考. 《机电工程技术》.
86. Mingsheng Chen, Zhi-mao Ming, Guixiong Liu, Hongpei Li (2020). Functional safety evaluation of battery anagement system based on probability of failure per hour. IOP Conference Series: Earth and Environment.DOI
87. Shao-Min Tang, Guixiong Liu, Zhiyu Lin, Xiaobing Li (2020). Multi-station test scheduling optimization method for industrial robot servo system. Journal of Ambient Intelligence and Humanized Computing.DOI
88. Mingsheng Chen, Zhi-mao Ming, Guixiong Liu, Yu Zhang (2020). Analysis of the multi-level battery management system functional index system weight. E3S Web of Conferences.DOI
89. Shao-Min Tang, Guixiong Liu, Zhiyu Lin, Xiaobing Li (2020). Research Progress of Loading Control Strategy of IRSS Test Platform Based on Neural Network. International Service Availability Symposium.DOI
90. Shao-Min Tang, Guixiong Liu, Zhiyu Lin, Xiaobing Li, Min-Qiang Pan (2020). A Test Procedure Optimization Method for an Industrial Robot Servo System on an Integrated Testing Platform. Complex.DOI
91. 何彬媛，黄坚，刘桂雄，林镇秋（2019）. 面向机箱标准件装配质量局部特征的智能检测技术. 《中国测试》.
92. Yu-Zhong Li, Wen-Ming Tang, Guixiong Liu (2019). Improved Bound Fit Algorithm for Fine Delay Scheduling in a Multi-Group Scan of Ultrasonic Phased Arrays. Italian National Conference on Sensors.DOI
93. Guixiong Liu, Sen-Ming Zhong (2019). Research on an Electromagnetic Interference Test Method Based on Fast Fourier Transform and Dot Frequency Scanning for New Energy Vehicles under Dynamic Conditions. Symmetry.DOI
94. Yu-Zhong Li, Wen-Ming Tang, Guixiong Liu (2019). HPEFT for Hierarchical Heterogeneous Multi-DAG in a Multigroup Scan UPA System. Electronics.DOI
95. Sen-Ming Zhong, Guixiong Liu, Jia-Jia Wu, Bo Zeng (2019). Indirect measurement technology of new energy vehicles’ braking force under dynamic braking conditions. Advances in Manufacturing.DOI
96. Yu-Zhong Li, Wen-Ming Tang, Guixiong Liu (2019). Improved scheduling algorithm for signal processing in asynchronous distributed ultrasonic total-focusing-method system. PLoS ONE.DOI
97. 唐文明，刘桂雄，宋定昆（2017）. 基于三次Spline+Hermite插值法超声相控阵聚焦延时技术. 《第十九届中国科协年会——分5“智能制造引领东北工业基地振兴”交流研讨会》.
98. 刘桂雄，黄坚，林志宇（2017）. 基于类间均衡树SVM的机箱装配质量机器评价系统. 《第十九届中国科协年会——分5“智能制造引领东北工业基地振兴”交流研讨会》.
99. Wen-Ming Tang, Guixiong Liu, Yu-Zhong Li, Da-Ji Tan (2017). Study on Focal Laws Fast Calculation of Ultrasonic Phased Array System Based on FPGA. 2017 International Conference on Computer Systems, Electronics and Control (ICCSEC).DOI
100. Wen-Ming Tang, Guixiong Liu, Ruo-Bo Lin (2017). Design of Polyphase Cascaded Integrator Comb Interpolator Filter for Ultrasonic Phased Array Time Delays.DOI
101. Wen-Ming Tang, Guixiong Liu, Yu-Zhong Li, Da-Ji Tan (2017). An Improved Scheduling Algorithm for Data Transmission in Ultrasonic Phased Arrays with Multi-Group Ultrasonic Sensors. Italian National Conference on Sensors.DOI
102. Wen-Ming Tang, Guixiong Liu, Yu-Zhong Li, Da-Ji Tan (2017). Real-time S-scan imaging reconstruction for ultrasonic phase array based on CORDIC and sectorial interpolation algorithms. IEEE International Conference on Electronic Measurement & Instruments.DOI
103. Yan-Hua Peng, Guixiong Liu, Yanming Quan, Qi-Lin Zeng (2017). The depth measurement of internal defect based on laser speckle shearing interference.DOI
104. 刘桂雄，唐文明，纪轩荣（2016）. 准单次正交互补Golay码超声编解码方法研究. 《仪器仪表学报》.
105. 洪晓斌，冯进亨，林沛嵩，刘桂雄（2016）. 非金属管道损伤的非线性超声导波延时检测定位方法. 《光学精密工程》.
106. 黄瑞龙，刘桂雄，黄坚，钟森鸣（2016）. 基于扫频调谐预扫描的快速EMI测试关键技术研究. 《电子测量与仪器学报》.
107. 刘桂雄，余荣斌，徐欢（2016）. 加速退化下光伏组件伪失效寿命分布估算. 《光学精密工程》.
108. 李远茂，刘桂雄，曾成刚（2016）. 基于GPS的室外放射源信息监控系统设计. 《电子测量与仪器学报》.
109. 刘桂雄，郭雪梅（2016）. 华南地区开展仪器仪表工程师资格认证的实践. 《学会》.
110. Wen-Ming Tang, Guixiong Liu (2016). FPGA Fixed-Point Technology of Exponential Function Achieved by CORDIC Algorithm.
111. Hao Zhong, Guixiong Liu, Dong-Xue Chen, Yan-Hua Peng, Qi-Lin Zeng（2016）. タイヤレーザの干渉縞模様の多方向周波法【JST・京大機械翻訳】.
112. Guixiong Liu, Dong-Xue Chen, Yan-Hua Peng, Qi-Lin Zeng (2016). Adaptive multidirectional frequency domain filter for noise removal in wrapped phase patterns. Applied Optics.DOI
113. Ding-Kun Song, Guixiong Liu, Wen-Ming Tang（2016）. 本論文では,改良SFCORDIC法を用いて,余弦関数の解法とその応用を改良した。【JST・京大機械翻訳】.
114. Xiao-Bin Hong, Nian-Zhi Li, Qingzhao Kong, Guixiong Liu, Michael Ho (2016). Local cell temperature monitoring for aluminum shell lithium-ion battery based on electrical resistance tomography.DOI
115. Guixiong Liu, Yuan-Mao Li (2016). RFID Indoor Positioning Based on RBF Interpolation and QPSO.
116. Xiao-Bin Hong, J. Ruan, Guixiong Liu, Tao Wang, Youyong Li, G. Song (2016). Synergetics based damage detection of frame structures using piezoceramic patches.DOI
117. Xiao-Bin Hong, G. Song, J. Ruan, Zhimin Zhang, Si-Dong Wu, Guixiong Liu (2016). Active monitoring of pipeline tapered thread connection based on time reversal using piezoceramic transducers.DOI
118. Xiao-Bin Hong, Jin-Heng Feng, Pei-Song Lin, Guixiong Liu (2016). Damage detection of nonmetallic pipe by using nonlinear ultrasonic guided wave with signal delay.DOI
119. Wen-Ming Tang, Guixiong Liu（2016）. 指数函数 CORDIC 算法的 FPGA 定点化技术.DOI
120. Rui-Long Huang, Gui-Xiong Liu, Jian Huang, Sen-Ming Zhong (2016). Research on key technology of rapid EMI measurement method based on swept-tuned pre-scanning.
121. Rui-Long Huang, Gui-Xiong Liu, Jian Huang, Sen-Ming Zhong（2016）. 掃頻調Xie予備走査に基づく高速EMI試験のキー技術の研究【JST・京大機械翻訳】.
122. 杨茹，刘桂雄，万勇，黄坚（2015）. 基波相位补偿脉冲输出式流量计检定新方法. 《自动化仪表》.
123. 余荣斌，刘桂雄，徐欢（2015）. 基于β分布统示法的光伏组件性能退化可靠度估算. 《仪器仪表学报》.DOI
124. 黄坚，卢嘉敏，刘桂雄，司徒琛（2015）. 面向流量计检定装置的流量计脉冲信号预处理方法. 《电子测量与仪器学报》.
125. 陈耿新，黄坚，刘桂雄（2015）. 基于可信k-NN的面向EMC浪涌测试多状态灯模式识别. 《电子测量与仪器学报》.
126. 廖晓文，刘桂雄，潘云飞（2015）. 一种高精度多路脉冲计数补偿方法. 《电子测量与仪器学报》.
127. 陈旭文，刘桂雄，黄坚（2015）. FPC的图像采集与表面曲向消除方法. 《电子测量与仪器学报》.
128. Ruo-Bo Lin, Guixiong Liu, Wen-Ming Tang (2015). FPGA Implementation of Ultrasonic S-Scan Coordinate Conversion Based on Radix-4 CORDIC Algorithm.DOI
129. Yuan-Mao Li, Guixiong Liu, X. Hong (2015). Indoor information of radioactive sources on-line monitoring system based on RFID.
130. Guo-Yu Chen, Guixiong Liu, Bingeng Zhu, Wen-Sheng Tan (2015). 3D Isosceles Triangular Ultrasonic Path of Transit-Time Ultrasonic Flowmeter: Theoretical Design and CFD Simulations. IEEE Sensors Journal.DOI
131. Guixiong Liu, Li-Heng Chou, Wengen Tang, X. Hong (2015). Synthetic aperture focusing technology based on correlation-delay in ultrasonic imaging.
132. Xiao-Bin Hong, Nian-Zhi Li, Jinheng Feng, Qingzhao Kong, Guixiong Liu (2015). Multi-Electrode Resistivity Probe for Investigation of Local Temperature Inside Metal Shell Battery Cells via Resistivity: Experiments and Evaluation of Electrical Resistance Tomography.DOI
133. 叶廷东，程韬波，刘桂雄，周松斌（2014）. MEMS气敏传感信息的动态预测补偿方法. 《中国测试》.
134. 洪晓斌，李年智，尹文伟，孔庆钊，刘桂雄（2014）. 基于电阻层析成像的汽车动力电池内部温度监测. 《光学精密工程》.
135. 刘桂雄，唐文明，谭大基（2014）. 基于多级半带滤波器的超声相控阵聚焦延时. 《光学精密工程》.
136. Guixiong Liu, Mu-Sen Tang, Guo-Yu Chen (2014). One kind of time difference time difference measuring method ultrasonic flowmeter.
137. Guixiong Liu, Ruo-Bo Lin, Wen-Ming Tang, X. Hong (2014). Method for implementing sine and cosine CORDIC algorithm using complement method on FPGA.
138. Xiao-Bin Hong, Nian-Zhi Li, Wen-Wei Yin, Qingzhao Kong, Guixiong Liu (2014). Monitoring of internal temperature of vehicle power battery based on electrical resistance tomography.DOI
139. Guixiong Liu, Wen-Ming Tang, Da-Ji Tan (2014). Focusing time delay of ultrasonic phased array based on multistage half-band filter.DOI
140. Xiao-Bin Hong, Si-Dong Wu, Nian-Zhi Li, Guixiong Liu (2013). Elongated metal structure damage detecting method and system based on active acoustic emission method.
141. Xiao-Bin Hong, Han Wang, Tao Wang, Guixiong Liu, Yourong Li, G. Song (2013). Dynamic cooperative identification based on synergetics for pipe structural health monitoring with piezoceramic transducers.DOI
142. Guixiong Liu (2013). Uncertainty evaluation of flatness error evaluation based on PSO. China Measurement & Test.
143. 刘桂雄（2012）. 基于IEEE1451的智能传感器技术与应用.
144. Guixiong Liu, Hong Liu (2012). Analysis of SAW Propagation Characteristics in MF-SAW Three Layers Structure Model.DOI
145. Mengyao Pana, Guixiong Liu (2012). Study on Vehicle Operating Safe State Monitoring Parameter and Measurement Model.DOI
146. Guixiong Liu, Yi Gao, Jian-Long Xu (2012). Study and Simulation of Scheduling Strategies on Vehicle Operating Safety State Monitoring System.DOI
147. Yao-Hua Deng, Guixiong Liu (2012). Machining Deformation Equation of FWP Based on Rayleigh-Leeds Method.DOI
148. Guixiong Liu, Geng-Xin Chen, Yue-Bin Zhou (2012). SPWD Based IEEE 1451.2 Smart Sensor Self-Recognition Mechanism and Realization.DOI
149. Guixiong Liu, Meng-Yao Pan, Yi Gao (2012). Safe state monitoring method of motor vehicle based on wheel load type intelligent sensing.
150. Yong Tan, Guixiong Liu, Guo-Guang Wu (2012). Cardinality Estimation-Based Adaptive Multi-Tree Splitting Algorithm for RFID System.DOI
151. Guo-Guang Wu, Guixiong Liu, Xin-Sheng Chai (2012). The Compensation Mechanism & Signal Identifying Method of Four-Node Multi-Wavelength Fiber-Sensing Network.DOI
152. Meng-Yao Pan, Guixiong Liu (2012). Novel Technology of Wheel Braking Performance Accessing Based on WEIS.DOI
153. Yao-Hua Deng, Guixiong Liu, Liming Wu (2012). Deformation Decision Knowledge Extraction of FWP Processing Based on RS and Entropy.DOI
154. Jian-Long Xu, Guixiong Liu, Yi Gao (2012). Vehicle Operating Safe State Monitoring System Modeling Method Based on Automata.DOI
155. Jun-Fang Wu, Gui-Xiong Liu (2012). Noniterative calibration of a camera lens with radial distortion.DOI
156. Yao-Hua Deng, Guixiong Liu, Q. Liao, L. Zeng, Liming Wu (2011). Research of FWP Process Deformation Compensation Forecasting on the Basis of TS-FNN.DOI
157. Yao-Hua Deng, Guixiong Liu, Wei Han, Zijie Fang, Li-Ming Wu, Q. Liao (2011). Research on Multi-Core Collaborative Computing for FWP Image Processing Algorithm by FPGA.DOI
158. Guixiong Liu, Yan Jiang, Jia-Yin Chen (2011). Multipoint flatness assessment method based on support vector regression.
159. Hong Liu, Guixiong Liu, Jian Ye (2011). Viscous Force Model Analysis of Magnetic Viscous Effect in Magnetic Fluid.DOI
160. Yuan-Mei Wen, Shisheng Huang, Guixiong Liu (2011). Testing and Analysis of High-Speed Camera for Pulse MIG/MAG Welding Droplet Transition.DOI
161. Guixiong Liu, Si-Dong Wu, X. Hong (2011). Integrated sensor RFID (radio frequency identification device) system and mixed-mode interface performance test method thereof.
162. Ting-Dong Ye, Guixiong Liu (2011). An Interpolation Decoupling Method of Multi-Sensor Information Based on Variance.DOI
163. Guixiong Liu (2011). Spinning Tension Monitoring System Based on LabVIEW and C8051F350. Modern Electronics Technique.
164. 叶廷东，刘桂雄（2010）. 传感信息软解耦方法的研究进展及分析. 《广州市仪器仪表学会2009年学术年会论文集》.
165. 黄国健，刘桂雄，洪晓斌，高屹（2010）. 基于鲁棒估计的动态传感数据校正方法. 《广州市仪器仪表学会2009年学术年会论文集》.
166. 叶建军，刘桂雄，洪晓斌，陈铁群（2010）. 基于GPRS的输电线路多参量远程采集系统. 《广州市仪器仪表学会2009年学术年会》.
167. 张健伟，潘梦鹞，刘桂雄，洪晓斌（2010）. 基于GFSIN的车载式智能加速度传感单元的设计. 《广州市仪器仪表学会2009年学术年会》.
168. 袁明山，刘桂雄（2010）. USBkey身份认证在虚拟仪器系统中应用. 《广州市仪器仪表学会2009年学术年会》.
169. 周岳斌，刘桂雄，孙登林（2010）. Matlab R2009环境下模拟称重传感器的数字化与性能测试. 《广州市仪器仪表学会2009年学术年会论文集》.
170. 吴俊芳，刘桂雄（2010）. 图像边缘过渡区的数学表征方法研究. 《2010中国仪器仪表学术、产业大会（论文集1）》.
171. 周岳斌，刘桂雄，洪晓斌（2010）. 基于Petri网的智能传感器STIM性能优化设计. 《2010中国仪器仪表学术、产业大会》.
172. 周钦河，刘桂雄，洪晓斌（2010）. 应用决策集选播模式的SIP测控网络负载均衡策略. 《光学精密工程》.
173. 洪晓斌，刘桂雄（2010）. 面向IP模式测控系统的PLSR-SBR双层压缩. 《光学精密工程》.
174. 张晓平，刘桂雄，周松斌（2010）. 利用最小二乘支持向量机实现无线传感器网络的目标定位. 《光学精密工程》.
175. 黄国健，刘桂雄，洪晓斌，陈铁群（2010）. IEEE 1451网络化智能传感器的通用建模方法及应用. 《光学精密工程》.
176. 陈耿新，刘桂雄，黄国健（2010）. 基于非抢占优先级排队模型的NCAP通信模式实时性分析与提高. 《2010中国仪器仪表学术、产业大会（论文集1）》.
177. 朱海兵，刘桂雄，洪晓斌（2010）. WSN目标跟踪节点动态行为OPNET建模与仿真. 《2010中国仪器仪表学术、产业大会（论文集1）》.
178. 袁明山，刘桂雄，徐钦桂（2010）. 网络化虚拟测控平台IBE身份认证设计与实现. 《2010中国仪器仪表学术、产业大会（论文集1）》.
179. 黄奕微，刘桂雄，洪晓斌（2010）. WSN节点定位系统构建方法与实现. 《2010中国仪器仪表学术、产业大会（论文集1）》.
180. 姜焰鸣，刘桂雄（2010）. 基于蜂群算法的大尺寸平面度评定. 《2010中国仪器仪表学术、产业大会（论文集1）》.
181. 许建龙，洪晓斌，刘桂雄（2010）. 基于物联网的机动车运行状态监测管理平台. 《2010中国仪器仪表学术、产业大会（论文集1）》.
182. 郑荣茂，刘桂雄（2010）. 基于算法可视化编辑的NGGPS功能扩展方法. 《2010中国仪器仪表学术、产业大会（论文集1）》.
183. 吴卓葵，刘桂雄，洪晓斌（2010）. 分布式多对象远程校准系统的交互与扩展机制研究. 《2010中国仪器仪表学术、产业大会（论文集1）》.
184. Guo-Jian Huang, Guixiong Liu, Geng Chen, Tie-Qun Chen (2010). Research on Improving TII Performances of IEEE 1451 Smart Sensors.DOI
185. Xiao-Bin Hong, Guixiong Liu, Zhuo-Kui Wu, Xi-Peng Du (2010). Remote calibration system for frequency based on in-place benchmark.DOI
186. Yao-Hua Deng, Guixiong Liu, Liming Wu, Lu-Xin Tang, Qiao-Fen Zhang (2010). The research on the deformation of tool path of flexible workpiece based on prediction model. International Conference on Computer and Automation Engineering.DOI
187. Guixiong Liu (2010). Development of Remote Internet Vehicular Inspection System for Machinery Equipment.
188. Yan Jiang, Guixiong Liu (2010). A New Flatness Evaluation-Rotation Method Based on GA.DOI
189. Guo-Jian Huang, Guixiong Liu, Xiao-Bin Hong, Tie-Qun Chen (2010). 9-ary tree based self-immunity method for smart sensors. Modelling Autonomic Communications Environments.DOI
190. Zhuo-Kui Wu, Guixiong Liu, Xiao-Bin Hong (2010). Design of Remote Calibration System Oriented to Multiple Objects and Complex Requirements.DOI
191. Yue-Bin Zhou, Guixiong Liu, Junchao Liang, Deng-Lin Sun (2010). Sensor signal high accuracy digitization and parameters optimization technologies. Modelling Autonomic Communications Environments.DOI
192. Jie Yang, Guixiong Liu (2010). Integrated quality control architecture for multistage machining processes. Other Conferences.DOI
193. Meng-Yao Pan, Guixiong Liu, Tu-Sheng Lin, Xiao-Bin Hong (2010). WEIS wheel speed real-time measuring method for VOSM.DOI
194. Jun-Fang Wu, Gui-Xiong Liu (2010). Nonmetric calibration of camera lens distortion using concentric circles pattern. Modelling Autonomic Communications Environments.DOI
195. Jun-Fang Wu, Gui-Xiong Liu (2010). The nonmetric estimation of center of distortion based on concentric circles pattern. World Congress on Intelligent Control and Automation.DOI
196. Guixiong Liu (2010). Double-layer compression method based on PLSR-SBR for IP mode measurement and control system. Optics and Precision Engineering.
197. Guixiong Liu (2010). Training room electric monitoring system based on Pyxos technology. Modern Manufacturing Engineering.
198. Guixiong Liu (2010). Application of orthogonal experiment method in sensors' digitization parameters optimization. Transducer and Microsystem Technologies.
199. Guixiong Liu (2010). Development of intelligent data collector for digital vernier caliper. Modern Manufacturing Engineering.
200. 刘桂雄，张晓平，周松斌（2009）. 基于最小二乘支持向量回归机的无线传感器网络目标定位法. 《光学精密工程》.
201. Guixiong Liu, Chen-Ying Xu, Peiqiang Zhang, Tingwan Wu (2009). Magnetomechanical modeling of magnet immersed in magnetic fluid and controllability of self-suspension.DOI
202. Guixiong Liu, Chuang-Lu Lin, Meng-Yao Pan, Guo-Jian Huang (2009). Wheel load-based type intelligent sensing wheel brake performance monitoring methods.
203. Guixiong Liu, Peiqiang Zhang, Chen-Ying Xu (2009). Modeling and analysis of controllable output property of cantilever-beam inertial sensors based on magnetic fluid.DOI
204. Gui-Xiong Liu, Jun-Fang Wu (2009). Fourier transformation method for measuring irregular slit width and device.
205. Jun-Fang Wu, Gui-Xiong Liu (2009). Wavelet edge detection based on self-adjusted directional derivative. Applied Optics and Photonics China.DOI
206. Guixiong Liu (2009). Analysis of vehicle driving safety measurement modes and development. Modern Manufacturing Engineering.
207. Guixiong Liu (2009). Development of Virtual Instruments Measurement Uncertainty Evaluation Based on Monte Carlo Method. Science Technology and Engineering.
208. 徐晨，刘桂雄，张沛强，蒲尧萍（2008）. 磁流体惯性传感的磁流耦合机理及流固结构. 《光学精密工程》.
209. 洪晓斌，刘桂雄，周钦河（2008）. 网络化测控平台选播运行模式策略. 《光学精密工程》.
210. 刘桂雄，林绪虹（2008）. 基于CMAC的图像融合快速算法. 《光学精密工程》.
211. 戴光智，陈铁群，薛家祥，刘桂雄（2008）. 小波图像融合改善超声图像分辨率. 《光学精密工程》.
212. D. Cao, Guixiong Liu (2008). Measurement of suspending object position in opaque liquid based on ultrasonic detection. International Symposium on Precision Mechanical Measurements.DOI
213. Xiao-Bin Hong, Guixiong Liu, Tie-Qun Chen (2008). Decision method of cooperative measurement for IP mode measuring & controlling system based on synergetics. World Congress on Intelligent Control and Automation.DOI
214. Guixiong Liu, Yao-Ping Pu (2008). Dynamic Simulation of Levitation Balance of Magnet Immersed in Magnetic Fluid.
215. Xiao-Bin Hong, Guixiong Liu, Tie-Qun Chen, Junchao Liang, Tao-Bo Cheng (2008). Multi-sensor cooperative measurement mechanism based on synergetics. International Symposium on Precision Mechanical Measurements.DOI
216. Guixiong Liu, Qin-Gui Xu, Furong Gao, Qiu-Ju Guan, Qiang Fang (2008). Analysis of key technologies for virtual instruments metrology. International Symposium on Precision Mechanical Measurements.DOI
217. Jie Yang, Guixiong Liu (2008). Quality Modeling and Prediction of Nitride Hardening for Piston Rings Based on Elman Neural Network. 2008 Fourth International Conference on Natural Computation.DOI
218. Qiu-Ju Guan, Furong Gao, Guixiong Liu, Qiang Fang (2008). Dynamic error modeling based on time series and modern spectrum analysis. International Symposium on Precision Mechanical Measurements.DOI
219. Ting-Dong Ye, Guixiong Liu, Xiao-Bin Hong, Guo-Jian Huang (2008). Modeling method of multi-sensor information fusion based on multiscale interpolation decoupling. International Symposium on Precision Mechanical Measurements.DOI
220. Guixiong Liu, Yao-Ping Pu, Cheng Xu (2008). Definition of Helmholtz and Kelvin forces in magnetic fluids.DOI
221. Guixiong Liu (2008). Eddy Current Testing and Signal Processing of Natural Crack. Science Technology and Engineering.
222. Guixiong Liu (2008). Signal Process and Profile Reconstruction of Stress Corrosion Crack by Eddy Current Test.
223. Xiao-Bin Hong, Guixiong Liu, Xi-Peng Du, Tao Chen (2008). Implementation method for region vector of IP mode multi-sensor cooperated measurement based on synergetics. Cybersecurity and Cyberforensics Conference.DOI
224. Guixiong Liu (2008). Improvement of resolution for ultrasonic image based on wavelet image fusion. Optics and Precision Engineering.
225. Guixiong Liu (2008). Architecture of IPv4/IPv6 measuring & controlling platform based on SOA. Manufacturing Automation.
226. Guixiong Liu (2008). Design on multi-layer intelligent measuring & controlling platform based on IPv4/IPv6. Manufacturing Automation.
227. 刘桂雄，蒲尧萍，徐晨（2007）. 磁流体浸没物磁场力分析及磁浮特性. 《第六届中国功能材料及其应用学术会议论文集（3）》.
228. 张沛强，徐晨，刘桂雄（2007）. 基于正交设计的二次磁浮力关键影响因素试验. 《第六届中国功能材料及其应用学术会议论文集（3）》.
229. Guixiong Liu, Xia-Ni Li (2007). A novel decoupling approach to an integrated optical-fiber proximity sensor for robots.DOI
230. Xiu-Li Chai, Dechang Zeng, Guixiong Liu (2007). Study on Simulation and Experiment of the Magnetizer in Magnetic Flux Leakage Testing. International Symposium on Mechatronics and its Applications.DOI
231. Bao-Zhong Xie, Tie-Mei Chen, Guixiong Liu (2007). Successive Approaching Phase Rotation Algorithm for Amplitude & Phase Computation in Demodulation. International Conference on Electronic Measurement and Instruments.DOI
232. Yao-Hua Deng, Gui-Xiong Liu (2007). Micro-image Edge Reconstruction Interpolation Algorithm Based on Lifting Scheme. International Conference on Communications and Information Technology.DOI
233. Guixiong Liu (2007). Design of High Cost-Performance Ratio Intelligent Dynamic Balancing Detection System. Science Technology and Engineering.
234. Guixiong Liu (2007). Array Eddy Current/Magnetic Integrative Sensor Based on Giant Magneto Resistance Part. Science Technology and Engineering.
235. Guixiong Liu (2007). Mechanism of Absolute Code Disc Based on Three Regional Models. Science Technology and Engineering.
236. Guixiong Liu (2007). Eddy Current Testing Crack Signal Processing and Profile Reconstruction. Pressure vessel Technology.
237. 刘桂雄，洪晓斌，徐静，刘少群（2006）. IP模式工厂化农业湿温气参数测控装置研制. 《仪器仪表学报》.DOI
238. 刘桂雄，曹东，程韬波（2006）. 基于磁流体独有特性的各种潜在传感器. 《功能材料》.
239. Quignan Liu, Yujuan Quan, Guixiong Liu (2006). The mechanism of local 3D image restoration base on infrared grid raster. The International Commission for Optics.DOI
240. D. Cao, Guixiong Liu, Tao-Bo Chen (2006). Mechanism and kinetic characteristic of intelligent magnetic fluid acceleration sensor. International Symposium on Precision Mechanical Measurements.DOI
241. 李玉兰，林绪虹，刘桂雄（2005）. 正交设计方法在优化空瓶检测图像处理参数中应用. 《光学精密工程》.
242. 刘桂雄，李夏妮，周德光（2005）. 基于多尺度数值计算的传感信息解耦新方法. 《光学精密工程》.
243. Guixiong Liu, Yongcong Kuang, Jing Xu, Xia-ni Li (2005). Robust-fusion optic fiber distance and orientation integrated sensing technology. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
244. Guixiong Liu (2005). Application of orthogonal design in optimizing parameters for the image processing of empty bottle detection system. Optics and Precision Engineering.
245. Guixiong Liu (2005). Research on Non-drip Water and Controllable Humidity Technology about Domestic Air-conditioners. Yibiao jishu yu chuanganqi.
246. Guixiong Liu (2004). Portable dynamic performance testing instrument for automobile based on strain survey.
247. Guixiong Liu (2004). Novel arithmetic of similar multi-sensor data fusion. Journal of Transducer Technology.
248. 刘桂雄，申柏华，冯云庆（2003）. 基于笔划趋势分析的二值图像细化方法. 《光学精密工程》.
249. Guixiong Liu (2003). A study of accuracy evaluation index-system based on entronpy concept.
250. 陈锦昌，梁利东，刘桂雄，张国栋（2002）. 基于测量的自由曲面造型与虚拟表示系统的研究. 《光学精密工程》.
251. 刘桂雄，申柏华，冯云庆，胡存银，易静蓉（2002）. 基于改进的Hough变换图像分割方法. 《光学精密工程》.
252. Guixiong Liu, Jing-Rong Yi, Yan Xiao, Cunyin Hu (2002). Length and weight measuring system for steel-pipe in fieldwork. SPIE/COS Photonics Asia.DOI
253. Guixiong Liu, Yong-Cong Kuang, Bo-Hua Shen, Jing-Rong Yi, Cunyin Hu (2002). Study on robust quad-eye optical fiber proximity sensing technology for robot. International Symposium on Optomechatronic Technologies.DOI
254. Guixiong Liu, Cunyin Hu, Jing-Rong Yi (2002). Optical fiber sensor technology for pose warp in robot screw flexible assembly. SPIE/COS Photonics Asia.DOI
255. 陈锦昌，梁利东，刘桂雄，肖炎（2001）. 权因子对B样条曲线形状影响的研究. 《光学精密工程》.
256. 邝泳聪，刘桂雄，郑时雄（2001）. 强度调制型光纤接近觉传感结构及发展新趋势. 《压电与声光》.
257. Guixiong Liu, Yong-Cong Kuang, Shixiong Zheng (2001). Method to adjust the measuring attitude and signal processing for optical fiber distance and orientation integrated proximity sensor. Other Conferences.DOI
258. Guixiong Liu, Qinhe Zhou, Yongcong Kuang, Jing Xu, Zhixin Zeng (2001). Intellective high-precision macromolecule resistance temperature/humidity instrument. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
259. 李绣峰，刘桂雄，邝泳聪（2000）. 用于机器人螺钉柔性装配的夹持器. 《光学精密工程》.
260. 刘桂雄，李绣峰，邝泳聪（2000）. 螺钉柔性装配中位姿偏差的光纤检测技术. 《压电与声光》.
261. Kai Li, Xian-xin Zhong, Guixiong Liu, Yu Chen (2000). Compensation network for multiple intensity-modulated optical fiber sensors. Other Conferences.DOI
262. 刘桂雄，阎华，郑时雄（1999）. 基于熵不确定性概念的机器人位姿精度理论(二)——主要评价指标公式推导. 《光学精密工程》.
263. 刘桂雄，李绣峰，林一松，郑时雄（1999）. 补偿型强度调制光纤传感器测量处理的新方法. 《压电与声光》.
264. 刘桂雄，李玩雪，李绣峰，郑时雄（1999）. 提高四眼式鲁棒性光纤接近觉传感范围的方法. 《压电与声光》.
265. 刘桂雄，郑时雄，徐静（1999）. 数字式全光纤三节点优化网络补偿技术的研究. 《仪器仪表学报》.
266. 阎华，刘桂雄，郑时雄（1999）. 基于熵不确定性概念的机器人位姿精度理论(一)——评价指标体系的建立. 《光学精密工程》.
267. 安军，刘桂雄，招惠玲（1999）. 沿任意方向的曲线映射计算方法研究. 《光学精密工程》.
268. Guixiong Liu, Hua Yan, Shixiong Zheng（1999）. 基於熵不確定性概念的機器人位姿精度理論（二）－主要評價指標公式推導.
269. 刘英，刘桂雄（1998）. 一种红宝石荧光光纤温度传感器的研究. 《光学精密工程》.
270. 郑时雄，刘桂雄，阎华，温伟成（1998）. 机器人视觉在自动装配线中的应用. 《光学精密工程》.
271. 李绣峰，刘桂雄，谢存禧，李玩雪（1998）. 机器人螺纹柔性装配中螺纹可装配性的几何分析. 《光学精密工程》.
272. 刘桂雄，李绣峰，谢存禧，李玩雪（1998）. 互配零件机器人装配作业的几个关键问题. 《光学精密工程》.
273. 刘桂雄，郑时雄，魏永纲，阎华（1997）. 一种光纤接近觉传感器的工作姿态调整方法. 《压电与声光》.
274. Xian-xin Zhong, Guixiong Liu, Jian-Shu Li, Kai Li (1996). All‐fiber compensation network with three couplers and its analysis.DOI
275. 钟先信，刘桂雄，宋立，姜学煤（1993）. 一种新型光纤补偿网络及其优化设计. 《光学精密工程》.
276. 刘桂雄，钟先信（1993）. 强度调制型光纤传感器信号补偿技术的现状与应用. 《压电与声光》.

预印本

1. Jiaxi Huang, Guixiong Liu, Jing Xu (2025). Glasscurtaincrackadversarialdefense: A Convolutional and Attention-Based Adversarial Defense Network for Glass Curtain Wall Crack Detection. SSRN Electronic Journal.DOI

书籍章节

1. Jiafu Cai, Guixiong Liu, Baitian Ouyang, Fushen Cai (2022). Research on Deflection Quality Assessment of Assembly Car Body Based on Deflection Measurement and Improved Principal Component Analysis Method. Springer proceedings in physics.DOI
2. Hong Pei Li, Guixiong Liu (2022). Research on Dynamic Condition Test of Power Battery Simulation Based on Principal Component Analysis. Springer proceedings in physics.DOI