董少静｜北京航空航天大学｜学者主页

2026

氢对TC4ELI钛合金微观组织和力学性能影响

杨日明，申秀丽，董少静

《航空动力学报》

DOI

2026

Crack-tip behavior of a powder-metallurgy nickel-based superalloy under constant load: Responses across microstructural conditions, temperatures and experimental configurations

Langsong Wang, 亜麗董, Shaojing Dong, Peng Fei Yan

Materials Science and Engineering A

DOI

2026

Thermo-chemo-mechanical coupling degradation of Cansas-II SiC fibers at medium-to-high temperatures and ambient air

Shaojing Dong, Ziyi Li, Shuyv Huang, Mengyao Li, Siyv Liu

Journal of the European Ceramic Society

DOI

2026

Prediction method for crystal plasticity constitutive parameters in single-crystal superalloys via two-stage tiered mapping neural network based on nanoindentation

Shaojing Dong, Weihan Sun, Xiuli SHEN

Materials Today Communications

DOI

2025

Adaptive proper orthogonal decomposition framework for multidisciplinary design optimization of turbine blades

Shaojing Dong, Yufan Fang, Wentong Hu, Aoran Yang, Chen Zhang, Xiuli Shen

Engineering Optimization

DOI

2025

氢对TC4ELI钛合金焊接接头组织和性能的影响

杨日明，申秀丽，董少静

《航空学报》

2025

典型涡轮气冷叶片参数化建模及优化设计

董少静，杨傲然，苑旺，张立章，方宇凡，申秀丽

《航空动力学报》

DOI

2025

Experimental measurement of tensile and torsional properties of CANSAS-II SiC fibres

Xiuli Shen, Yuhan Zhao, Shaojing Dong, Hui Hong

Ceramics International

DOI

2025

Design method of aeroengine turbine tenon/mortise joints’ teeth number based on active learning random forest and structural design optimization

Shaojing Dong, Yufan Fang, Xiuli Shen, Peng Li

Aerospace Science and Technology

DOI

2025

Topology optimization methods and its applications in aerospace: a review

Peng Li, Shen Xiuli, Shaojing Dong, Yufan Fang

Structural and Multidisciplinary Optimization

DOI

2025

A multiscale simulation method incorporating fiber distribution characteristics for off-axis tensile analysis of 2D woven SiCf/SiC

Shaojing Dong, Kai Li, Xin Liu, Yifei Qiao, Xiuli Shen, Shuo Zhang

Engineering Fracture Mechanics

DOI

2025

A novel physical cycle-jump method for fatigue crack simulation of polycrystalline nickel-based superalloy

Shaojing Dong, Mei-jie Zhou, Xiuli Shen

International Journal of Fatigue

DOI

2025

A novel anisotropic grain boundary cohesive zone model for fracture simulation of polycrystalline nickel-based superalloy

Shaojing Dong, Mei-jie Zhou, Xiuli Shen

Engineering Fracture Mechanics

DOI

2024

Nonlinear behavior simulation of ceramic-matrix composites using constituent-volume homogenization method

Yuhan Zhao, Shaojing Dong, Xiuli Shen

Mechanics of Materials

DOI

2023

基于接触刚度分布特性的叶片振动响应分析

钱佳绮，董少静，高鹏新，申秀丽

《航空动力学报》

2023

Polycrystal modeling and micromechanical simulation of nickel-based superalloy electron beam welded joint

Shaojing Dong, Mei-jie Zhou, Kun Gao, Xiuli Shen

Materials Science and Engineering A

DOI

2023

Integration of nanoindentation and finite element method for interpretable tensile properties: A cross-scale calculation method of uneven joints

Kun GAO, Zhiying Liu, Xiuli Shen, Lizhong Lang, Shaojing Dong

Chinese Journal of Aeronautics

DOI

2022

航空发动机初步设计阶段榫接结构前置判别方法

董少静，方宇凡，胡文通，申秀丽

《航空动力学报》

2022

Strength Analysis of Two-Dimensional Ceramic-Matrix-Composite Guide Vane Based on Bimodulus Constitutive Model

Shuo Zhang, Xiuli Shen, Ziyi Li, Xin Liu, Shaojing Dong

AIAA Journal

DOI

2022

Mechanical response and damage mechanism of 2D woven SiCf/SiC ceramic matrix composites under tension-shear coupling load

Xin Liu, Shaojing Dong, Shuo Zhang, Xiuli Shen, Qiang Qu, Jianqiang Xin, Yongjun Wu, Yongpeng Dong

Ceramics International

DOI

2021

陶瓷基复合材料力学性能计算及涡轮导叶宏观响应分析方法

刘鑫，乔逸飞，董少静，申秀丽

《航空发动机》

2021

Strength uncertainty analysis of composite turbine blade with small sample size

Gaoxiang Chen, Fan Jiang, Shaojing Dong, Daxiang Liu

Structures

DOI

2020

SiCf/SiC陶瓷基复合材料涡轮导叶热疲劳试验研究与损伤分析

刘鑫，乔逸飞，董少静，申秀丽

《燃气涡轮试验与研究》

2020

带锯齿形叶冠叶片接触应力计算及静强度分析

申秀丽，高鹏新，董少静，张文灿

《航空动力学报》

DOI

2020

Prediction of the Thermo-Mechanical Properties of the SiCf/SiC RVE Model via FEM and Asymptotic Homogenization Method: Process and Implementation Details

Xiuli Shen, Shuo Zhang, Xin Liu, Longdong Gong, Shaojing Dong

Archives of Computational Methods in Engineering

DOI

2020

Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

Xiuli Shen, Kun Gao, Shaojing Dong

The International Journal of Advanced Manufacturing Technology

DOI

2019

基于拓扑优化的曲边轮廓锯齿叶冠结构设计

苑旺，申秀丽，董少静

《航空发动机》

DOI

2019

Multidisciplinary and multifidelity optimization for twin-web turbine disc with asymmetric temperature distribution

Xiuli Shen, Wentong Hu, Shaojing Dong

Structural and Multidisciplinary Optimization

DOI

2018

Thermal Load Test Method and Numerical Calculation for Ceramic Matrix Composite Turbine Guide Vane

Xiuli Shen, Yifei Qiao, Shaojing Dong, Xin Liu, Longdong Gong

Applied Composite Materials

DOI

2018

A Method to Analyze the Contact Stress of Dovetail Attachments in Aeroengine

Shuo Zhang, Xiuli Shen, Shaojing Dong, Ye Zhang, Wentong Hu

Journal of Engineering for Gas Turbines and Power

DOI

2018

RVE model with shape and position defects for predicting mechanical properties of 3D braided CVI-SiCf/SiC composites

Xiuli Shen, Xinxin Liu, Shaojing Dong, Longdong Gong

Composite Structures

DOI

2017

Tensile Behavior and Microstructural Evolution of the Polycrystalline Nickel-Based Superalloy Applied in Turbine Disk

Xiuli Shen, Shaojing Dong, Zhiying Chen

International Journal of Turbo and Jet Engines

DOI

2015

高推质比双辐板涡轮盘结构研究及光弹试验验证

董少静，申秀丽，康滨鹏，樊江，李守秋，栾永先，霍成民

《航空动力学报》

2014

Research of an Advanced Turbine Disk for High Thrust-Weight Ratio Engine

Xiuli Shen, Shaojing Dong, Zhiying Chen

DOI

2012

The Fluid-Thermal-Structure Coupled Analysis and Optimization of Turbine Mortise/Disc

Xiuli Shen, Shaojing Dong, Xiaodong Qi

ASME Gas Turbine India Conference (GTINDIA)

DOI

董少静

精选作品

期刊论文

氢对TC4ELI钛合金微观组织和力学性能影响

Crack-tip behavior of a powder-metallurgy nickel-based superalloy under constant load: Responses across microstructural conditions, temperatures and experimental configurations

Thermo-chemo-mechanical coupling degradation of Cansas-II SiC fibers at medium-to-high temperatures and ambient air

Prediction method for crystal plasticity constitutive parameters in single-crystal superalloys via two-stage tiered mapping neural network based on nanoindentation

Adaptive proper orthogonal decomposition framework for multidisciplinary design optimization of turbine blades

氢对TC4ELI钛合金焊接接头组织和性能的影响

典型涡轮气冷叶片参数化建模及优化设计

Experimental measurement of tensile and torsional properties of CANSAS-II SiC fibres

Design method of aeroengine turbine tenon/mortise joints’ teeth number based on active learning random forest and structural design optimization

Topology optimization methods and its applications in aerospace: a review

A multiscale simulation method incorporating fiber distribution characteristics for off-axis tensile analysis of 2D woven SiCf/SiC

A novel physical cycle-jump method for fatigue crack simulation of polycrystalline nickel-based superalloy

A novel anisotropic grain boundary cohesive zone model for fracture simulation of polycrystalline nickel-based superalloy

Nonlinear behavior simulation of ceramic-matrix composites using constituent-volume homogenization method

基于接触刚度分布特性的叶片振动响应分析

Polycrystal modeling and micromechanical simulation of nickel-based superalloy electron beam welded joint

Integration of nanoindentation and finite element method for interpretable tensile properties: A cross-scale calculation method of uneven joints

航空发动机初步设计阶段榫接结构前置判别方法

Strength Analysis of Two-Dimensional Ceramic-Matrix-Composite Guide Vane Based on Bimodulus Constitutive Model

Mechanical response and damage mechanism of 2D woven SiCf/SiC ceramic matrix composites under tension-shear coupling load

陶瓷基复合材料力学性能计算及涡轮导叶宏观响应分析方法

Strength uncertainty analysis of composite turbine blade with small sample size

SiCf/SiC陶瓷基复合材料涡轮导叶热疲劳试验研究与损伤分析

带锯齿形叶冠叶片接触应力计算及静强度分析

Prediction of the Thermo-Mechanical Properties of the SiCf/SiC RVE Model via FEM and Asymptotic Homogenization Method: Process and Implementation Details

Simulation and analysis of electron beam welding residual stress in thin-walled high-temperature alloy aeroengine structures

基于拓扑优化的曲边轮廓锯齿叶冠结构设计

Multidisciplinary and multifidelity optimization for twin-web turbine disc with asymmetric temperature distribution

Thermal Load Test Method and Numerical Calculation for Ceramic Matrix Composite Turbine Guide Vane

A Method to Analyze the Contact Stress of Dovetail Attachments in Aeroengine

RVE model with shape and position defects for predicting mechanical properties of 3D braided CVI-SiCf/SiC composites

Tensile Behavior and Microstructural Evolution of the Polycrystalline Nickel-Based Superalloy Applied in Turbine Disk

高推质比双辐板涡轮盘结构研究及光弹试验验证

Research of an Advanced Turbine Disk for High Thrust-Weight Ratio Engine

The Fluid-Thermal-Structure Coupled Analysis and Optimization of Turbine Mortise/Disc

研究方向