范永升｜北京航空航天大学｜学者主页

期刊论文

2026

A hybrid framework to quantitatively link service damage and stochastic engine flight profiles of turbine disks

Xiaoguang Yang, Muwei Cheng, Duoqi Shi, Yantao Sun, Pengfei Ji, Xuezhou Song, Yongsheng Fan

International Journal of Fatigue

DOI

2026

Quantifying strength degradation induced by defect architecture using a physics-guided deep surrogate framework

Bo Zhang, Duoqi Shi, Yongsheng Fan, Changqi Liu, Xiaoguang Yang

Composites Part B Engineering

DOI

2026

Micro-meso uncertainty propagation in tensile behaviour of C/C-SiC composites with in-situ experimental validation

Zhenyu Wang, Duoqi Shi, Changqi Liu, Yongsheng Fan, Yujia Jin, Yang Li, Xiaoguang Yang

Composites Part A Applied Science and Manufacturing

DOI

2025

基于LSTM的航空发动机涡轮盘局部服役温度-应力快速预测方法

程穆威，杨晓光，范永升，姜仁杰，石多奇

《航空动力学报》

DOI

2025

数智时代的液体火箭发动机结构失效与寿命评定：机遇与挑战

霍世慧，刘钰，范永升，谢彬，王振，张凭

《火箭推进》

2025

The role of rafting in small fatigue crack behaviours of a Ni-based single crystal superalloy at room temperature

Yongsheng Fan, T. Ren, C.L. Dong, Xiaoguang Yang, Duoqi Shi

International Journal of Fatigue

DOI

2025

Crack-dominated failure of thrust chamber inner wall with multilayer metal coatings

Ping Zhang, Hongtao Xie, Hui Tian, Yongsheng Fan, Shihui Huo, Yushan Gao, Ruizhi Li

Engineering Failure Analysis

DOI

2025

Study of LSTM-based constitutive modeling for coupled multimodal microstructure time-series damage in DZ125 superalloy

Yu-ming Ye, Weiqing Huang, Dongwei Li, Huihua Feng, Xiaoguang Yang, Yongsheng Fan, Shuangqi Lyu, Shiwei Han

International Journal of Fatigue

DOI

2025

A molecular dynamic investigation of cyclic strengthening mechanism of Ni-based single crystal superalloy

Bin Xie, Jing Wang, Yongsheng Fan, Ruizhi Li

Mechanics of Materials

DOI

2024

Anisotropy cyclic plasticity constitutive modelling for Ni-based single-crystal superalloys based on Kelvin decomposition

Yuheng Yun, Yongsheng Fan, Duoqi Shi, Tianxiao Sui, Xiaoguang Yang

International Journal of Fatigue

DOI

2024

Correlation between microstructures and mechanical properties of a SLM Ni-based superalloy after different post processes

Xiaoguang Yang, Bolin Li, Mingliang Wang, S.Q. Guo, Guolei Miao, Duoqi Shi, Yongsheng Fan

Journal of Materials Research and Technology

DOI

2024

Effects of rafting on the meso deformation and fracture behaviour of a Ni-based single crystal superalloy at room temperature: In-situ observation and simulation

Long Tan, Xiaoguang Yang, Duoqi Shi, Yongsheng Fan, Yi Shi

Science China Technological Sciences

DOI

2023

数据驱动的高温结构强度与寿命评估：进展与挑战

杨晓光，谭龙，郝文琦，石多奇，范永升

《推进技术》

2023

A preliminary discussion about the application of machine learning in the field of constitutive modeling focusing on alloys

Dongwei Li, Jinxiang Liu, Yongsheng Fan, Xiaoguang Yang, Weiqing Huang

Journal of Alloys and Compounds

DOI

2023

A novel microstructure-informed machine learning framework for mechanical property evaluation of SiCf/Ti composites

Wenqi Hao, Duoqi Shi, Changqi Liu, Yongsheng Fan, Xiaoguang Yang, Long Tan, Bo Zhang

Journal of Materials Research and Technology

DOI

2023

A multi-scale framework for life reduction assessment of turbine blade caused by microstructural degradation

Xiaoguang Yang, Menglei WANG, Duoqi Shi, Zhenlei Li, Yongsheng Fan

Chinese Journal of Aeronautics

DOI

2023

A viscoplastic-coupled phase field modelling for mechanical behaviors of thermal barrier coating system with randomly microporous structures

Jianan Song, Yongsheng Fan, Jia Huang, Wei‐Qing Huang

Engineering Fracture Mechanics

DOI

2022

考虑服役微结构状态的镍基合金低周疲劳寿命预测方法

谭龙，杨晓光，孙燕涛，范永升，石多奇

《推进技术》

2022

粘塑性本构模型材料参数识别的降维优化方法及其应用

石多奇，隋天校，范永升，董成利，郭广平，杨晓光

《推进技术》

2022

考虑小裂纹特性的裂纹扩展数值分析方法及实验验证

王志芳，杨晓光，石多奇，范永升，施祎，宣海军

《推进技术》

2022

涡轮叶片小尺寸试样取样及高温疲劳试验夹持方法

范永升，杨晓光，王相平，石多奇，王良，王鹏

《航空发动机》

2022

服役涡轮叶片筏化判废：定量表征及阈值确定

范永升，杨晓光，石多奇，谭龙，黄渭清

《航空学报》

2022

An Integrated Creep Damage Analysis Method of Turbine Blades Based on the Service History

Duoqi Shi, Muwei Cheng, Xiaoguang Yang, Yongsheng Fan

DOI

2022

An energy-based low-cycle fatigue life evaluation method considering anisotropy of single crystal superalloys

Tianxiao Sui, Duoqi Shi, Yongsheng Fan, Zhenlei Li, Xiaoguang Yang

Propulsion and Power Research

DOI

2022

Atomistic Investigation on the Strengthening Mechanism of Single Crystal Ni-Based Superalloy under Complex Stress States

Bin Xie, Xinyu Wang, Yongsheng Fan, Ruizhi Li

Metals

DOI

2021

涡轮叶片合金筏化量化表征及寿命退化研究

范永升，杨晓光，石多奇，谭龙

《航空发动机》

DOI

2021

A modified constitutive model considering microstructure degradation of Ni-based superalloys and its application to microstructural damage calculation

Peirong Ren, Weiqing Huang, Xiaoguang Yang, Jia Huang, Yi Shi, Yongsheng Fan

Journal of Alloys and Compounds

DOI

2019

某型航空发动机涡轮叶片服役微观损伤研究

范永升，黄渭清，杨晓光，石多奇

《机械工程学报》

2019

Mechanical properties deterioration and its relationship with microstructural variation using small coupons sampled from serviced turbine blades

Yongsheng Fan, Weiqing Huang, Xiaoguang Yang, Duoqi Shi, Shaolin Li

Materials Science and Engineering A

DOI

2019

The role of coarsening on LCF behaviour using small coupons of a DS Ni-based superalloy

Yongsheng Fan, Weiqing Huang, Xiaoguang Yang, Duoqi Shi, Shiwei Han

International Journal of Fatigue

DOI

2019

Microstructural Damage Analysis of Service Turbine Blades for an Aero-engine

Fan Yongsheng, HUANG Weiqing, YANG Xiaoguang, SHI Duoqi

Journal of Mechanical Engineering

DOI

预印本

2023

Nonlinear fatigue life prediction model based on isodamage curve considering two-block loading

Jiangbo Fan, Yuheng Yun, Duoqi Shi, Zhenlei Li, Yongsheng Fan, Xiaoguang Yang

DOI

范永升

精选作品

期刊论文

A hybrid framework to quantitatively link service damage and stochastic engine flight profiles of turbine disks

Quantifying strength degradation induced by defect architecture using a physics-guided deep surrogate framework

Micro-meso uncertainty propagation in tensile behaviour of C/C-SiC composites with in-situ experimental validation

基于LSTM的航空发动机涡轮盘局部服役温度-应力快速预测方法

数智时代的液体火箭发动机结构失效与寿命评定：机遇与挑战

The role of rafting in small fatigue crack behaviours of a Ni-based single crystal superalloy at room temperature

Crack-dominated failure of thrust chamber inner wall with multilayer metal coatings

Study of LSTM-based constitutive modeling for coupled multimodal microstructure time-series damage in DZ125 superalloy

A molecular dynamic investigation of cyclic strengthening mechanism of Ni-based single crystal superalloy

Anisotropy cyclic plasticity constitutive modelling for Ni-based single-crystal superalloys based on Kelvin decomposition

Correlation between microstructures and mechanical properties of a SLM Ni-based superalloy after different post processes

Effects of rafting on the meso deformation and fracture behaviour of a Ni-based single crystal superalloy at room temperature: In-situ observation and simulation

数据驱动的高温结构强度与寿命评估：进展与挑战

A preliminary discussion about the application of machine learning in the field of constitutive modeling focusing on alloys

A novel microstructure-informed machine learning framework for mechanical property evaluation of SiCf/Ti composites

A multi-scale framework for life reduction assessment of turbine blade caused by microstructural degradation

A viscoplastic-coupled phase field modelling for mechanical behaviors of thermal barrier coating system with randomly microporous structures

考虑服役微结构状态的镍基合金低周疲劳寿命预测方法

粘塑性本构模型材料参数识别的降维优化方法及其应用

考虑小裂纹特性的裂纹扩展数值分析方法及实验验证

涡轮叶片小尺寸试样取样及高温疲劳试验夹持方法

服役涡轮叶片筏化判废：定量表征及阈值确定

An Integrated Creep Damage Analysis Method of Turbine Blades Based on the Service History

An energy-based low-cycle fatigue life evaluation method considering anisotropy of single crystal superalloys

Atomistic Investigation on the Strengthening Mechanism of Single Crystal Ni-Based Superalloy under Complex Stress States

涡轮叶片合金筏化量化表征及寿命退化研究

A modified constitutive model considering microstructure degradation of Ni-based superalloys and its application to microstructural damage calculation

某型航空发动机涡轮叶片服役微观损伤研究

Mechanical properties deterioration and its relationship with microstructural variation using small coupons sampled from serviced turbine blades

The role of coarsening on LCF behaviour using small coupons of a DS Ni-based superalloy

Microstructural Damage Analysis of Service Turbine Blades for an Aero-engine

预印本

Nonlinear fatigue life prediction model based on isodamage curve considering two-block loading

研究方向