张海涛｜东北大学｜学者主页

2026

The relationship between microstructure and corrosion in Al-Mg-Si-Cu alloys modified by pre-stretching deformation

Pei Mao, Zibin Wu, Zhixin Feng, Rui Wang, Dongtao Wang, Xiaoxiong Luo, Haitao Zhang, Cheng Guo, Bo Zhang, Hiromi Nagaumi

Journal of Alloys and Compounds

DOI

2026

Synergistic enhancement of strength and ductility in a novel AlMgMn(ZnCuAg) alloy via non-isothermal pre-aging and pre-deformation

Xinru Shao, Cheng Guo, Haoshang Liu, Jianxin Hu, Zibin Wu, Haitao Zhang, Hiromi Nagaumi

Materials Science and Engineering A

DOI

2026

Toughening mechanism via Ω-phase optimization in Al-Cu-Mg-Ag alloys: A synergistic approach of cluster control and defect engineering

Jingong Qin, Hui Li, Haitao Zhang, Lei Li, Chuang Yu, Yusong Suo, Donghui Yang, Zhiyong Liu, Zhihuan Lin, Hiromi Nagaumi

Materials Science and Engineering A

DOI

2026

Effects of V, Ti, and Mo composite addition on dispersed phase precipitation and mechanical properties of Al-Mg-Si-Cu alloys

Haitao Zhang, Ruiqi Chang, Jingong Qin, XiangDong WANG, Donghui Yang, Xiaoyu Song, Xiang Wang, Rong Li, Chen Gao, Minghang Li, Jiaojian Wang, Ke Qin

Journal of Alloys and Compounds

DOI

2026

Clarify the influence of solution treatment on the microstructure evolution and bending springback of high-strength Al-Mg-Si-Cu alloys

Yifeng Li, Zibin Wu, Hiromi Nagaumi, Yuanzhen Luo, Dongtao Wang, Jing Zou, Qipeng Dong, Xiaoxiong Luo, Haitao Zhang, Bo Zhang

Materials Science and Engineering A

DOI

2026

High strength and non sensitized Al-5Mg alloys enabled by Ag-Mn synergy through multiscale control of precipitation and electrochemical homogeneity

Xu Li, Haitao Zhang, Conghe Wang, Cheng Guo, Zibin Wu, Hiromi Nagaumi, Ziping Li

Journal of Alloys and Compounds

DOI

2026

Effect of quenching methods on the microstructure and fatigue properties of Al–Mg–Si–Cu profiles

Zibin Wu, Pei Mao, Yifeng Li, Wangjie Chen, Zhixin Feng, Dongtao Wang, Rui Wang, Xiaozu Zhang, Xin Dong, Haitao Zhang, Hiromi Nagaumi, Bo Zhang

Journal of Materials Research and Technology

DOI

2026

Synergistic improvement of mechanical properties and corrosion resistance in Mg₂Si-modified 3003 aluminum alloy via dispersoid engineering

Xu Li, jiayin Lu, Haitao Zhang, Hiromi Nagaumi

Materials Letters

DOI

2026

Al-Mg-Si系铝合金材料吸能性能的研究进展

罗远震，吴子彬，长海博文，李一峰，王东涛，张海涛，张波

《材料导报》

2025

Optimizing the solidification structure and performance of Al–Si–Mg cast alloys subjected to combined Sr–Ca modification and rotating magnetic fields

Jing Zou, Haitao Zhang, Chuang Yu, Zibin Wu, Cheng Jun Guo, Hiromi Nagaumi

Journal of Alloys and Compounds

DOI

2025

Intergranular Corrosion Behavior and Mechanical Properties of Al-Mg-Si Alloy Profiles: The Effect of Peripheral Coarse Grain Thickness

Zhixin Feng, Zibin Wu, Dongtao Wang, Hiromi Nagaumi, Yifeng Li, Wanjie Chen, Fuan Hua, Minghe Zhang, Haitao Zhang, Bo Zhang

Journal of Materials Engineering and Performance

DOI

2025

Effect of Cu Content on Microstructure and Properties of 7xxx Series Alloy

Haitao Zhang, Zheng Wang, Donghui Yang, Zibin Wu, Hiromi Nagaumi, Ke Qin, Cheng Jun Guo, Chengbin Yu, Ziping Li

Journal of Materials Engineering and Performance

DOI

2025

Effect of annealing on microstructure and bending springback of high-strength Al-Mg-Si-Cu alloys

Xiuhua Luo, Yifeng Li, Zibin Wu, Dongtao Wang, Haitao Zhang, Xiaotao Liu, Zhixin Feng, Xiaozu Zhang, Jing Zou, Hiromi Nagaumi, Bo Zhang

Materials Today Communications

DOI

2025

Designing wear-resistant high-zinc aluminium alloys with high strength and ductility

Haitao Zhang, Donghui Yang, Xiaoyu Song, Zibin Wu, Cheng Jun Guo, Ke Qin, Dongtao Wang, Ping Wang, Hiromi Nagaumi

Communications Materials

DOI

2025

Achieving strength-ductility synergy in novel heterogeneous lamella structures of Al-Mg-Sc-Zr-Ag alloys

Cheng Jun Guo, Haoshang Liu, Fang Chen, Ran Ma, Bingxin Cong, Haitao Zhang, Jing Zou, Xingang Liu, Hiromi Nagaumi

Materials Research Letters

DOI

2025

Influence of high-temperature and short-time solution treatment on microstructure and properties of Al−Mg−Zn−Ag alloy

Cheng Jun Guo, Yifei Chen, Yuqin Guo, Huan WANG, Haitao Zhang, Jing-qi CHEN, Zi-bin WU, Xingang Liu, Hiromi Nagaumi

Transactions of Nonferrous Metals Society of China

DOI

2025

基于模温控制的汽车结构件低压铸造缺陷抑制研究

罗凤宝，张亚丛，谭成通，王先成，王志学，张海涛

《汽车知识》

2025

热处理对粉末触变成形50Si/Al-1Mg复合材料组织及性能的影响

张海涛，阎峰云，张燕强

《特种铸造及有色合金》

2025

黏结剂对水系AgO-Al电池正极材料电化学性能的影响（英文）

贺雪花，王升贵，王元奎，徐万里，宋觉敏，李政，张海涛，杨光宙，汪心怡，张倩，李宏煦，余琨

Transactions of Nonferrous Metals Society of China

2025

高性能大型铝合金铸造技术现状及展望

刘琦，王军，张海涛，殷凤杰，王强，王飞

《铸造技术》

2025

低压及差压铸造工艺对ZL114A铝合金铸件组织和性能的影响

王飞，张海涛，马辉，王强，殷凤杰，徐天泽，郑学冲，彭艳锋

《金属加工(热加工)》

2025

砂型低压铸造Mg-Gd-Y-Zn-Zr合金的组织和性能

孟祥炜，王飞，刘贞露，张海涛，殷凤杰，马辉，商立瞳，韩红，宋卓

《特种铸造及有色合金》

DOI

2024

Influence of Mo on microstructure, mechanical properties and intergranular corrosion properties of Al-Mg-Mn alloys

Haitao Zhang, Qingdong Zhang, Fangyuan Wang, Cheng Jun Guo, Donghui Yang, Zheng Wang, Xiaochen Tang, Ziping Li, Hiromi Nagaumi

Journal of Alloys and Compounds

DOI

2024

Regulating corrosion resistance of Al-4.5Mg-2.0Zn-0.3Ag alloy via non-isothermal ageing combined with cold rolling

Cheng Jun Guo, Huan Wang, Yuqin Guo, Yifei Chen, Yujiao Ke, Haitao Zhang, Xingang Liu, Hiromi Nagaumi

Corrosion Science

DOI

2024

Effect of Trace Zn on the Mechanical Properties and Corrosion Behavior of Al-Mg-Si Alloys with High Cu

Zhifu Mao, Yifeng Li, Zibin Wu, Hiromi Nagaumi, Dongtao Wang, Sensen Song, Xin Dong, Zhixin Feng, Cheng Jun Guo, Haitao Zhang

Journal of Materials Engineering and Performance

DOI

2024

Investigating the interdependence of microstructure and properties in low-Cu content Al-Zn-Mg alloys via thermodynamic calculation

Donghui Yang, Haitao Zhang, Minghang Li, Zibin Wu, Ke Qin, Hiromi Nagaumi, Ping Wang

Materials Letters

DOI

2024

铸造方法和热处理对ZL114A合金显微组织及力学性能的影响

田少鲲，金圆平，王明杰，张海涛，肖抓，杜越，郭占，陈永栓

《铸造工程》

2024

Cr对Al-Cu-Mg-Ag合金动态再结晶行为和力学性能的影响

余创，张海涛，邹晶，付金禹，颜帅，许光明

《材料工程》

2024

直热法粉末触变成形制备高体积分数Si/Al复合材料及热处理研究

张海涛

《兰州理工大学》

2024

海水激活电池AgCl正极材料的制备及电化学性能研究

张海涛

《中南大学》

2023

Simultaneously improving strength and ductility of new-type Al–4.5Mg–2.0Zn–0.3Ag alloy by coupling of pre-deformation and non-isothermal ageing

Cheng Jun Guo, Yifei Chen, Huan Wang, Yuqin Guo, Haitao Zhang, Zibin Wu, Hiromi Nagaumi

Materials Science and Engineering A

DOI

2023

Synchronous improvement of mechanical properties and corrosion resistance of novel heat-treatable 5xxx aluminum alloy by non-isothermal ageing

Cheng Jun Guo, Yifei Chen, Haitao Zhang, HaiPeng Ji, Zibin Wu, Xingang Liu, Hiromi Nagaumi

Journal of Alloys and Compounds

DOI

2023

Effect of Mn and Mo on microstructure and mechanical properties of Al-Si-Cu-Mg-0.6Fe alloy

Hao He, Jing Zou, Haitao Zhang, Da-chuan Hu, Zhijun Feng, Yufei Li, Zehua Li, H.R. Li

China Foundry

DOI

2023

Investigating the influences of Fe, Mn and Mo additions on the evolution of microstructure and mechanical performances of Al–Si–Mg cast alloys

Jing Zou, Haitao Zhang, Chuang Yu, Zibin Wu, Cheng Jun Guo, Hiromi Nagaumi, Kai Zhu, Baomian Li, Jianzhong Cui

Journal of Materials Research and Technology

DOI

2023

Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents

Pengfei Zhou, Dongtao Wang, Hiromi Nagaumi, Rui Wang, Xiaozu Zhang, Xinzhong Li, Haitao Zhang, Bo Zhang

Metals

DOI

2023

Effect of mechanical properties, microstructure and residual stress on the bending springback behavior of high-strength Al–Mg–Si–Cu alloy tubes

Yifeng Li, Zibin Wu, Dongtao Wang, Hiromi Nagaumi, Guangrui Luo, Zhixin Feng, Xiaozu Zhang, Rui Wang, Haitao Zhang, Bo Zhang

Journal of Materials Research and Technology

DOI

2023

Effects of CrxMo(0.2-x) addition on the dispersoids evolution and mechanical properties of Al–Cu–Mg–Ag–Mn alloy

Chuang Yu, Haitao Zhang, Yabiao Zhang, Cheng Jun Guo, Guangming Xu, Baomian Li, Jianzhong Cui

Journal of Materials Research and Technology

DOI

2023

铝合金疲劳性能的研究进展

张海涛，李峻，王东涛，长海博文

《轻合金加工技术》

2022

Understanding the corrosion behavior by passive film evolution in Zn-containing Al-Si-Cu cast alloy

Rui Wang, Dongtao Wang, Hiromi Nagaumi, Zibin Wu, Xinzhong Li, Haitao Zhang

Corrosion Science

DOI

2022

Influences of Ag Addition on the Microstructure and Mechanical Properties of Al-4Mg Alloy

Cheng Jun Guo, Yifei Chen, Haitao Zhang

Materials

DOI

2022

Influence of Ag on microstructure, mechanical properties and tribological properties of as-cast Al-33Zn-2Cu high-zinc aluminum alloy

Haitao Zhang, Donghui Yang, Xi Chen, Hiromi Nagaumi, Zibin Wu, Cheng Jun Guo, Jing Zou, Ping Wang, Ke Qin, Jianzhong Cui

Journal of Alloys and Compounds

DOI

2022

Age hardening and intergranular corrosion behavior of new type Al-4.5Mg-0.6Zn-0.5Cu-XAg(wt%) alloy

Haitao Zhang, Yunfei Nan, Cheng Jun Guo, Jianzhong Cui

Journal of Alloys and Compounds

DOI

2022

Influence of Zn and/or Ag additions on microstructure and properties of Al-Mg based alloys

Cheng Jun Guo, Haitao Zhang, Jiehua Li

Journal of Alloys and Compounds

DOI

2022

Improvement Mechanism of Thermal Conductivity in T6/T7‐Treated Al–Si–Mg Cast Alloy: Experimental Studies and Density Functional Theory Calculations

Dongtao Wang, Hiromi Nagaumi, Wenping Weng, Rui Wang, Xiaozu Zhang, Yaoqiao Hu, Xinzhong Li, Haitao Zhang

Advanced Engineering Materials

DOI

2022

Highly efficient Fe separation induced by Fe-containing particle agglomeration in Al-7Si-0.3Mg alloy melt

Xiaozu Zhang, Dongtao Wang, Hiromi Nagaumi, Rui Wang, Zibin Wu, Xinzhong Li, Haitao Zhang

Journal of Materials Research and Technology

DOI

2022

Influence of Mo on the dynamic recrystallization behavior of Al–Cu–Mg–Ag alloy

Chuang Yu, Haitao Zhang, Yabiao Zhang, Jing Zou, Cheng Jun Guo, Hao He, Guangming Xu, Baomian Li, Jianzhong Cui

Journal of Materials Research and Technology

DOI

2022

永磁搅拌对AlSi9MgMn合金组织和性能的影响

秦克，乔晓阳，张海涛，邹晶，可泽超，尹纲，郭凯敏

《轻合金加工技术》

2022

Zn、Ag对Al-Mg合金力学性能和腐蚀性能的影响

李姗珊，朱凯，张海涛，郭成，董鑫，王嘉琪，李宝绵，崔建忠

《轻合金加工技术》

2022

Mn对Al-5Mg-0.6Ag-0.2Sc-0.1Zr合金组织性能的影响

陈日欣，朱凯，张海涛，李宝绵，崔建忠

《轻合金加工技术》

2021

Morphology, thermal stability, electronic structure and mechanical properties of α-AlFeMnSi phases with varying Mn/Fe atomic ratios: Experimental studies and DFT calculations

Xiaozu Zhang, Dongtao Wang, Hiromi Nagaumi, Yunxuan Zhou, Wei Yu, Xiaoyu Chong, Xinzhong Li, Haitao Zhang

Journal of Alloys and Compounds

DOI

2021

Improved Distribution and Uniformity of α-Al(Mn,Cr)Si Dispersoids in Al-Mg-Si-Cu-Mn (6xxx) Alloys by Two-Step Homogenization

Zhen Li, Jian Ping Qin, Haitao Zhang, Xiaoguo Wang, Bo Zhang, Hiromi Nagaumi

Metallurgical and Materials Transactions A

DOI

2021

Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations

Xiaozu Zhang, Dongtao Wang, Yunxuan Zhou, Xiaoyu Chong, Xinzhong Li, Haitao Zhang, Hiromi Nagaumi

Journal of Alloys and Compounds

DOI

2021

Evolution of microstructure and properties of Ag and Si-doped AlMg alloys

Haitao Zhang, Cheng Jun Guo, Yunfei Nan, Shanshan Li, Rixin Chen, Shuo Liu, Ping Wang, Jianzhong Cui, Hiromi Nagaumi

Journal of Materials Science Materials in Electronics

DOI

2021

Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag (wt.%) alloy processed by T6 or thermomechanical treatment

Cheng Jun Guo, Haitao Zhang, Shanshan Li, Rixin Chen, Yunfei Nan, Lei Li, Ping Wang, Baomian Li, Jianzhong Cui, Hiromi Nagaumi

Corrosion Science

DOI

2021

Influence of cold pre-deformation on the microstructure, mechanical properties and corrosion resistance of Zn-bearing 5xxx aluminum alloy

Haitao Zhang, Cheng Jun Guo, Shanshan Li, Baomian Li, Hiromi Nagaumi

Journal of Materials Research and Technology

DOI

2021

Research on grain refinement and its mechanism of pure aluminum under a novel permanent magnet stirring

Jing Zou, Haitao Zhang, Xiaoyang Qiao, Zibin Wu, Lei Wang, Yinglong Li, Hiromi Nagaumi, Baomian Li, Jianzhong Cui

Journal of Materials Research and Technology

DOI

2021

Effects of an intermittent permanent magnet stirring on the melt flow and grain refinement of Al–4.5Cu alloy

Jing Zou, Haitao Zhang, Zibin Wu, Jiahui Wang, Baomian Li, Jianzhong Cui, Hiromi Nagaumi, Yinglong Li

Journal of Materials Research and Technology

DOI

2021

Fast aging strengthening by hybrid precipitates in high pressure die-cast Al-Si-Cu-Mg-Zn alloy

Dongtao Wang, Shichao Liu, Xiaozu Zhang, Xinzhong Li, Haitao Zhang, Hiromi Nagaumi

Materials Characterization

DOI

2021

New Strategy to Improve the Mechanical Properties in Cast Al–Mg–Fe Alloys by the Formation of Al–AlFe Eutectic

Pengfei Zhou, Dongtao Wang, Shichao Liu, Rui Wang, Haitao Zhang, Xinzhong Li, Hiromi Nagaumi

Advanced Engineering Materials

DOI

2021

Understanding crystal structure and morphology evolution of Fe, Mn, Cr-containing phases in Al-Si cast alloy

Xiaozu Zhang, Dongtao Wang, Xinzhong Li, Haitao Zhang, Hiromi Nagaumi

Intermetallics

DOI

2021

合金元素在铝合金汽车结构件铸件的研究现状

张海涛，何昊，尹纲，郭凯敏，白杰

《铸造技术》

DOI

2021

高强耐热6×××系铝合金的研究现状及其发展趋势

李宝绵，柯奇，张海涛，李佳成

《轻合金加工技术》

DOI

2021

间歇式永磁搅拌对高纯铝凝固组织的影响

李宝绵，李佳成，张海涛，邹晶，可泽超，乔晓阳，柯奇

《轻合金加工技术》

DOI

2021

铝合金中Fe元素的危害及其去除方法研究进展

张海涛，唐威，王东涛，刘晓涛，李新中，长海博文

《轻合金加工技术》

DOI

2021

焊后时效热处理对6063铝合金CMT焊接接头组织性能的影响

秦克，秦坤伦，陈夏明，王晓南，董其鹏，张庆宇，张海涛，长海博文

《轻合金加工技术》

DOI

2021

钪对铝合金组织性能影响的研究现状与趋势

刘晓涛，白杰，张海涛，南云飞，何昊

《铸造技术》

DOI

2020

Enhancement of the discharge performance of Al-0.5Mg-0.1Sn-0.05Ga (wt.%) anode for Al-air battery by directional solidification technique and subsequent rolling process

Zibin Wu, Haitao Zhang, Jing Zou, Xiaodong Shen, Ke Qin, Chunyan Ban, Jianzhong Cui, Hiromi Nagaumi

Journal of Alloys and Compounds

DOI

2020

Microstructural Refinement and α‐Dispersoid Evolution in Direct‐Chill Cast Al–Mg–Si–Fe Alloy

Dongtao Wang, Haitao Zhang, Hiromi Nagaumi, Xueke Li, Jianzhong Cui

Advanced Engineering Materials

DOI

2020

3D morphology and growth mechanism of cubic α-Al(FeMnCr)Si intermetallic in an Al-Si cast alloy

Dongtao Wang, Xiaozu Zhang, Hiromi Nagaumi, Xinzhong Li, Haitao Zhang

Materials Letters

DOI

2020

Effect of Homogenization and Extrusion on Microstructure and Mechanical Properties of Cladding Billet by Cladding Casting

Pinfeng Jia, Xing Han, Wenbin Li, Haitao Zhang, Jianzhong Cui

MATERIALS TRANSACTIONS

DOI

2020

散热器用4045/3003铝合金复合管材的开发

杨英春，韩星，李鹏伟，张海涛，崔建忠

《铝加工》

2020

ZL205A合金块状偏析相缺陷的研究

郭凡，贤福超，张海涛，姜枫，王淑青，肖抓，卢鹤

《铸造技术》

DOI

2020

DC铸造5182铝合金大尺寸扁锭偏析及微观组织的试验研究

李宝绵，夏军，张海涛，董其鹏，长海博文

《轻合金加工技术》

DOI

2019

Microstructural homogeneity, mechanical properties, and wear behavior of in situ Mg2Si particles reinforced Al–matrix composites fabricated by hot rolling

Dongtao Wang, Haitao Zhang, Hiromi Nagaumi, Pinfeng Jia, Jianzhong Cui

Journal of Materials Research and Technology

DOI

2019

An atomic-resolution investigation of precipitation evolution in Al-Mg-Ag alloys

Cheng Jun Guo, Haitao Zhang, Zibin Wu, Xiaodong Shen, Ping Wang, Baomian Li, Jianzhong Cui, Hiromi Nagaumi

Materials Letters

DOI

2018

Effects of pre-treatment combining with aging on the microstructures and mechanical properties of Al-Mg-Ag alloys

Cheng Jun Guo, Haitao Zhang, Jing Zou, Baomian Li, Jianzhong Cui

Materials Science and Engineering A

DOI

2018

The evolution of microstructure and mechanical properties during high-speed direct-chill casting in different Al–Mg2Si in situ composites

Dong-tao Wang, Haitao Zhang, Lei Li, Hailin Wu, Ke Qin, Jianzhong Cui

International Journal of Minerals Metallurgy and Materials

DOI

2018

Effects of Ag on the age hardening response and intergranular corrosion resistance of Al-Mg alloys

Cheng Jun Guo, Haitao Zhang, Zibin Wu, Dongtao Wang, Baomian Li, Jianzhong Cui

Materials Characterization

DOI

2018

Effect of cooling rate on growth and transformation of primary Mg2Si in Al–Mg2Si in situ composites

Dongtao Wang, Haitao Zhang, Cheng Jun Guo, Hailin Wu, Jianzhong Cui

Journal of materials research/Pratt's guide to venture capital sources

DOI

2018

Computation of synthetic surface heat transfer coefficient of 7B50 ultra-high-strength aluminum alloy during spray quenching

Lei Kang, Gang Zhao, Ni Tian, Haitao Zhang

Transactions of Nonferrous Metals Society of China

DOI

2018

Effect of clad ratio on interfacial microstructure and properties of cladding billets via direct-chill casting process

Haitao Zhang, Xing Han, Dong-tao Wang, Bo Shao, Ke Qin, Jianzhong Cui

Transactions of Nonferrous Metals Society of China

DOI

2018

6082铝合金微观结构与疲劳行为研究

张海涛

《大连理工大学》

2018

DC铸造法制备包覆铸锭研究（英文）

郭菁，韩星，藤莹雪，王洪斌，张海涛，农登

《稀有金属材料与工程》

2018

7B50超高强铝合金喷水淬火过程综合表面换热系数的计算（英文）

康雷，赵刚，田妮，张海涛

Transactions of Nonferrous Metals Society of China

2018

包覆率对直接水冷铸造法制备包覆铸锭界面组织和性能的影响（英文）

张海涛，韩星，王东涛，邵博，秦克，崔建忠

Transactions of Nonferrous Metals Society of China

2018

高强耐蚀5xxx系铝合金的研究现状及发展趋势

郭成，李宝绵，张海涛，崔建忠

《稀有金属》

2017

Effects of Process Parameters on Solidification Structure of A390 Aluminum Alloy Hollow Billet

Kesheng Zuo, Haitao Zhang, Ke Qin, Jianzhong Cui, Qingzhang Chen

Metallurgical and Materials Transactions B

DOI

2017

The Analysis of Strontium Modification on Microstructure and Mechanical Properties of Al-25%Mg2Si In Situ Composite

Dongtao Wang, Haitao Zhang, Xing Han, Bo Shao, Lei Li, Jianzhong Cui

Journal of Materials Engineering and Performance

DOI

2017

热交换器用铝合金复合管材的制备新技术

韩星，杨英春，王立娟，孙巍，李鹏伟，张海涛，崔建忠

《材料与冶金学报》

2017

水冷换热系数的研究及平面凝固铸造的数值模拟

邵博，秦克，张海涛，崔建忠

《东北大学学报(自然科学版)》

2017

铸造速度和混合稀土对Al-23%Si合金组织和性能的影响

王东涛，张海涛，韩星，崔建忠

《东北大学学报(自然科学版)》

2016

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF A390 ALLOY HOLLOW BILLET FABRICATED BY DIRECT CHILL CASTING

Kesheng Zuo, Haitao Zhang, Ke Qin, Jianzhong Cui

DOI

2016

Three-Dimensional CFD Simulation Coupled with Thermal Contraction in Direct-Chill Casting of A390 Aluminum Alloy Hollow Billet

Kesheng Zuo, Haitao Zhang, Ke Qin, Jianzhong Cui, Qingzhang Chen

Metallurgical and Materials Transactions B

DOI

2016

Numerical simulation on sprue distributions during cladding casting process

Xing Han, Haitao Zhang, Bo Shao, Dongtao Wang, Longgang Cheng, Yadong Guo, Ke Qin, Jianzhong Cui

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2016

Interfacial characteristics and properties of a low-clad-ratio AA4045/AA3003 cladding billet fabricated by semi-continuous casting

Xing Han, Haitao Zhang, Bo Shao, Lei Li, Ke Qin, Jianzhong Cui

International Journal of Minerals Metallurgy and Materials

DOI

2016

Numerical simulation and experiment validation of level-pour direct-chill casting of A390 alloy hollow billets under different feeding schemes

Kesheng Zuo, Haitao Zhang, Ke Qin, Jianzhong Cui

International Journal of Numerical Methods for Heat &amp Fluid Flow

DOI

2016

Development of inclusions in 3104 alloy melt during heating and holding treatments

Xiaoxiong Luo, Haitao Zhang, Xing Han, Shijie Guo, Dandan Chen, Jianzhong Cui, Hiromi Nagaumi

International Journal of Minerals Metallurgy and Materials

DOI

2016

Study on Fabrication of AA4032/AA6069 Cladding Billet Using Direct Chill Casting Process

Xing Han, Haitao Zhang, Bo Shao, Lei Li, Xuan Liu, Jianzhong Cui

Journal of Materials Engineering and Performance

DOI

2016

Microstructure and properties at bonding interface of AA4045/AA3003 aluminum alloy cladding billet prepared by semi-continuous casting

Xing Han, Bo Shao, Kesheng Zuo, Lin Jiang, Haitao Zhang, Lizi He, Ke Qin, Jianzhong Cui

Transactions of Nonferrous Metals Society of China

DOI

2016

Sn纳米粒子对AZ31镁合金组织和性能的影响

房灿峰，宋丹丹，刘光旭，张海涛，黄昊，张兴国，董星龙

《稀有金属材料与工程》

2016

铸造速度对半连续铸造过共晶Al-Si合金管坯的影响

左克生，张海涛，林兆伟，秦克，崔建忠

《特种铸造及有色合金》

2016

半连续铸造法制备AA4045/AA3003铝合金包覆铸锭的界面组织和性能（英文）

韩星，邵博，左克生，蒋琳，张海涛，何立子，秦克，崔建忠

Transactions of Nonferrous Metals Society of China

2015

Effects of Heat Treatment and Extrusion on Microstructure and Properties of A390 Alloy Hollow Billet Fabricated via DC Casting

Kesheng Zuo, Haitao Zhang, Ke Qin, Xing Han, Bo Shao, Jianzhong Cui

MATERIALS TRANSACTIONS

DOI

2015

Structural and crystallographic study on 3004 aluminum alloy ingot by horizontal direct chill casting under combined electromagnetic fields

Lei Li, Qingfeng Zhu, Zhihao Zhao, Haitao Zhang, Yubo Zuo, Jianzhong Cui

Journal of materials research/Pratt's guide to venture capital sources

DOI

2015

铝合金结构疲劳裂纹监测研究

冯璐璐，李全通，焦胜博，张海涛

《仪表技术与传感器》

2015

铸造工艺参数对半连续铸造A390合金管坯宏微观组织的影响

左克生，张海涛，秦克，崔建忠

《东北大学学报(自然科学版)》

2015

铝合金凝固收缩行为研究

乐启炽，李浩宇，柏媛媛，张海涛

《东北大学学报(自然科学版)》

2014

复合铸锭包覆铸造的数值模拟

韩星，邵博，张海涛，崔建忠

《东北大学学报(自然科学版)》

2014

Mn对Mg-6.5Zn合金热裂倾向性的影响

李浩宇，柏媛媛，张海涛，武鑫，张志强，乐启炽

《金属学报》

2014

4045/3003铝合金包覆铸造工艺的数值模拟研究

韩星，邵博，张海涛，崔建忠

《热加工工艺》

2014

电流均匀化对7B04铝合金组织和性能的影响

张海涛，郭雅萍，贾品峰，何立子，崔建忠

《稀有金属》

2014

半连续铸造复合铸锭的数值模拟研究

邵博，韩星，秦克，张海涛，崔建忠

《铸造》

2013

Al-20%Si合金初生硅宏观偏聚和细化的试验研究

贾海龙，张海涛，左克生，何立子，崔建忠

《铸造》

2013

退火温度对深冷轧制6063铝合金组织性能的影响

贾海龙，张海涛，艾峥嵘，崔建忠

《热加工工艺》

2012

Mechanism of grain refinement of an Al–Zn–Mg–Cu alloy prepared by low-frequency electromagnetic casting

Yubo Zuo, Jianzhong Cui, Zhihao Zhao, Haitao Zhang, Lei Li, Qingfeng Zhu

Journal of Materials Science

DOI

2012

Study on Electromagnet‐Air Knife DC Casting Process of Large‐Size AA 7055 Aluminum Alloys

Haitao Zhang, Jianzhong Cui, Hiromi Nagaumi

ICAA13: 13th International Conference on Aluminum Alloys

DOI

2012

A New Approach to Producing Large‐Size AA 7055 Aluminum Alloy Ingots

Haitao Zhang, Jianzhong Cui, Hiromi Nagaumi

DOI

2012

4045/3004/4045层状铝合金复合材料连铸制备方法

蒋会学，秦克，张海涛，崔建忠

《材料科学与工艺》

2011

Effects of low-frequency electromagnetic field on the surface quality of 7050 aluminum alloy ingots during the hot-top casting process

Xiangjie Wang, Jianzhong Cui, Yubo Zuo, Zhihao Zhao, Haitao Zhang

International Journal of Minerals Metallurgy and Materials

DOI

2011

Production of super-high strength aluminum alloy billets by low frequency electromagnetic casting

Haitao Zhang, Jianzhong Cui

Transactions of Nonferrous Metals Society of China

DOI

2011

Direct-chill semi-continuous casting process of three-layer composite ingot of 4045/3004/4045 aluminum alloys

Huixue Jiang, Haitao Zhang, Ke Qin, Jianzhong Cui

Transactions of Nonferrous Metals Society of China

DOI

2011

DC铸造7075铝合金微观偏析的量化分析

陈丹丹，张海涛，蒋会学，崔建忠

《材料与冶金学报》

2011

低频电磁铸造Al-4.5%Cu合金微观偏析研究

陈丹丹，张海涛，王向杰，崔建忠

《金属学报》

2011

直接水冷半连续铸造制备4045/3004/4045铝合金三层复合锭(英文)

蒋会学，张海涛，秦克，崔建忠

Transactions of Nonferrous Metals Society of China

2011

低频电磁铸造超高强铝合金铸锭(英文)

张海涛，崔建忠

Transactions of Nonferrous Metals Society of China

2010

Effects of Pre-Ageing Treatment on Subsequent Artificial Ageing Characteristics of an Al-1.01Mg-0.68Si-1.78Cu Alloy

Lizi He, Haitao Zhang, Jianzhong Cui

Journal of Material Science and Technology

DOI

2010

复合锭直接水冷半连续铸造过程的研究

蒋会学，秦克，张海涛，崔建忠

《东北大学学报(自然科学版)》

2010

低频电磁铸造5083(Er)铝合金的组织性能

何立子，李谢华，王向杰，张海涛，崔建忠

《材料热处理学报》

DOI

2010

均匀化对新型Al-Mg-Mn(Er)合金组织性能的影响

何立子，李谢华，张海涛，崔建忠

《稀有金属材料与工程》

2009

Formation of feathery grains with the application of a static magnetic field during direct chill casting of Al-9.8wt%Zn alloy

Lei Li, Yudong Zhang, Claude Esling, Zhihao Zhao, Yubo Zuo, Haitao Zhang, Jianzhong Cui

Journal of Materials Science

DOI

2009

Formation of twinned lamellas with the application of static magnetic fields during semi-continuous casting of Al–0.24wt%Fe alloy

Lei Li, Yudong Zhang, Claude Esling, Zhihao Zhao, Yubo Zuo, Haitao Zhang, Jianzhong Cui

Journal of Crystal Growth

DOI

2009

Effects of thermomechanical treatment on the mechanical properties and microstructures of 6013 alloy

Lizi He, Haitao Zhang, Jianzhong Cui

Journal of Wuhan University of Technology-Mater Sci Ed

DOI

2008

Experimental investigation of heat transport and solidification during low frequency electromagnetic hot-top casting of 6063 aluminum alloy

Xiangjie Wang, Haitao Zhang, Yubo Zuo, Zhihao Zhao, Qingfeng Zhu, Jianzhong Cui

Materials Science and Engineering A

DOI

2006

Coupled modeling of electromagnetic field, fluid flow, heat transfer and solidification during low frequency electromagnetic casting of 7XXX aluminum alloys

Haitao Zhang, Hiromi Nagaumi, Yubo Zuo, Jianzhong Cui

Materials Science and Engineering A

DOI

2005

低频电磁水平半连续铸造中磁场的分布及其对宏观偏析的影响

赵志浩，崔建忠，左玉波，张海涛，张北江

《铸造》

2005

超高强铝合金中的结晶相及其控制

左玉波，王爽，张海涛，刘晓涛，崔建忠

《有色矿冶》

精选作品

期刊论文

The relationship between microstructure and corrosion in Al-Mg-Si-Cu alloys modified by pre-stretching deformation

Synergistic enhancement of strength and ductility in a novel AlMgMn(ZnCuAg) alloy via non-isothermal pre-aging and pre-deformation

Toughening mechanism via Ω-phase optimization in Al-Cu-Mg-Ag alloys: A synergistic approach of cluster control and defect engineering

Effects of V, Ti, and Mo composite addition on dispersed phase precipitation and mechanical properties of Al-Mg-Si-Cu alloys

Clarify the influence of solution treatment on the microstructure evolution and bending springback of high-strength Al-Mg-Si-Cu alloys

High strength and non sensitized Al-5Mg alloys enabled by Ag-Mn synergy through multiscale control of precipitation and electrochemical homogeneity

Effect of quenching methods on the microstructure and fatigue properties of Al–Mg–Si–Cu profiles

Synergistic improvement of mechanical properties and corrosion resistance in Mg₂Si-modified 3003 aluminum alloy via dispersoid engineering

Al-Mg-Si系铝合金材料吸能性能的研究进展

Optimizing the solidification structure and performance of Al–Si–Mg cast alloys subjected to combined Sr–Ca modification and rotating magnetic fields

Intergranular Corrosion Behavior and Mechanical Properties of Al-Mg-Si Alloy Profiles: The Effect of Peripheral Coarse Grain Thickness

Effect of Cu Content on Microstructure and Properties of 7xxx Series Alloy

Effect of annealing on microstructure and bending springback of high-strength Al-Mg-Si-Cu alloys

Designing wear-resistant high-zinc aluminium alloys with high strength and ductility

Achieving strength-ductility synergy in novel heterogeneous lamella structures of Al-Mg-Sc-Zr-Ag alloys

Influence of high-temperature and short-time solution treatment on microstructure and properties of Al−Mg−Zn−Ag alloy

基于模温控制的汽车结构件低压铸造缺陷抑制研究

热处理对粉末触变成形50Si/Al-1Mg复合材料组织及性能的影响

黏结剂对水系AgO-Al电池正极材料电化学性能的影响（英文）

高性能大型铝合金铸造技术现状及展望

低压及差压铸造工艺对ZL114A铝合金铸件组织和性能的影响

砂型低压铸造Mg-Gd-Y-Zn-Zr合金的组织和性能

Influence of Mo on microstructure, mechanical properties and intergranular corrosion properties of Al-Mg-Mn alloys

Regulating corrosion resistance of Al-4.5Mg-2.0Zn-0.3Ag alloy via non-isothermal ageing combined with cold rolling

Effect of Trace Zn on the Mechanical Properties and Corrosion Behavior of Al-Mg-Si Alloys with High Cu

Investigating the interdependence of microstructure and properties in low-Cu content Al-Zn-Mg alloys via thermodynamic calculation

铸造方法和热处理对ZL114A合金显微组织及力学性能的影响

Cr对Al-Cu-Mg-Ag合金动态再结晶行为和力学性能的影响

直热法粉末触变成形制备高体积分数Si/Al复合材料及热处理研究

海水激活电池AgCl正极材料的制备及电化学性能研究

Simultaneously improving strength and ductility of new-type Al–4.5Mg–2.0Zn–0.3Ag alloy by coupling of pre-deformation and non-isothermal ageing

Synchronous improvement of mechanical properties and corrosion resistance of novel heat-treatable 5xxx aluminum alloy by non-isothermal ageing

Effect of Mn and Mo on microstructure and mechanical properties of Al-Si-Cu-Mg-0.6Fe alloy

Investigating the influences of Fe, Mn and Mo additions on the evolution of microstructure and mechanical performances of Al–Si–Mg cast alloys

Microstructural Evolution and Mechanical Properties of Al-Si-Mg-Cu Cast Alloys with Different Cu Contents

Effect of mechanical properties, microstructure and residual stress on the bending springback behavior of high-strength Al–Mg–Si–Cu alloy tubes

Effects of CrxMo(0.2-x) addition on the dispersoids evolution and mechanical properties of Al–Cu–Mg–Ag–Mn alloy

铝合金疲劳性能的研究进展

Understanding the corrosion behavior by passive film evolution in Zn-containing Al-Si-Cu cast alloy

Influences of Ag Addition on the Microstructure and Mechanical Properties of Al-4Mg Alloy

Influence of Ag on microstructure, mechanical properties and tribological properties of as-cast Al-33Zn-2Cu high-zinc aluminum alloy

Age hardening and intergranular corrosion behavior of new type Al-4.5Mg-0.6Zn-0.5Cu-XAg(wt%) alloy

Influence of Zn and/or Ag additions on microstructure and properties of Al-Mg based alloys

Improvement Mechanism of Thermal Conductivity in T6/T7‐Treated Al–Si–Mg Cast Alloy: Experimental Studies and Density Functional Theory Calculations

Highly efficient Fe separation induced by Fe-containing particle agglomeration in Al-7Si-0.3Mg alloy melt

Influence of Mo on the dynamic recrystallization behavior of Al–Cu–Mg–Ag alloy

永磁搅拌对AlSi9MgMn合金组织和性能的影响

Zn、Ag对Al-Mg合金力学性能和腐蚀性能的影响

Mn对Al-5Mg-0.6Ag-0.2Sc-0.1Zr合金组织性能的影响

Morphology, thermal stability, electronic structure and mechanical properties of α-AlFeMnSi phases with varying Mn/Fe atomic ratios: Experimental studies and DFT calculations

Improved Distribution and Uniformity of α-Al(Mn,Cr)Si Dispersoids in Al-Mg-Si-Cu-Mn (6xxx) Alloys by Two-Step Homogenization

Exploring crystal structures, stability and mechanical properties of Fe, Mn-containing intermetallics in Al-Si Alloy by experiments and first-principles calculations

Evolution of microstructure and properties of Ag and Si-doped AlMg alloys

Evolution of microstructure, mechanical properties and corrosion behavior of Al-4Mg-2Zn-0.3Ag (wt.%) alloy processed by T6 or thermomechanical treatment

Influence of cold pre-deformation on the microstructure, mechanical properties and corrosion resistance of Zn-bearing 5xxx aluminum alloy

Research on grain refinement and its mechanism of pure aluminum under a novel permanent magnet stirring

Effects of an intermittent permanent magnet stirring on the melt flow and grain refinement of Al–4.5Cu alloy

Fast aging strengthening by hybrid precipitates in high pressure die-cast Al-Si-Cu-Mg-Zn alloy

New Strategy to Improve the Mechanical Properties in Cast Al–Mg–Fe Alloys by the Formation of Al–AlFe Eutectic

Understanding crystal structure and morphology evolution of Fe, Mn, Cr-containing phases in Al-Si cast alloy

合金元素在铝合金汽车结构件铸件的研究现状

高强耐热6×××系铝合金的研究现状及其发展趋势

间歇式永磁搅拌对高纯铝凝固组织的影响

铝合金中Fe元素的危害及其去除方法研究进展

焊后时效热处理对6063铝合金CMT焊接接头组织性能的影响

钪对铝合金组织性能影响的研究现状与趋势

Enhancement of the discharge performance of Al-0.5Mg-0.1Sn-0.05Ga (wt.%) anode for Al-air battery by directional solidification technique and subsequent rolling process

Microstructural Refinement and α‐Dispersoid Evolution in Direct‐Chill Cast Al–Mg–Si–Fe Alloy

3D morphology and growth mechanism of cubic α-Al(FeMnCr)Si intermetallic in an Al-Si cast alloy

Effect of Homogenization and Extrusion on Microstructure and Mechanical Properties of Cladding Billet by Cladding Casting

散热器用4045/3003铝合金复合管材的开发

ZL205A合金块状偏析相缺陷的研究

DC铸造5182铝合金大尺寸扁锭偏析及微观组织的试验研究

Microstructural homogeneity, mechanical properties, and wear behavior of in situ Mg2Si particles reinforced Al–matrix composites fabricated by hot rolling

An atomic-resolution investigation of precipitation evolution in Al-Mg-Ag alloys

Effects of pre-treatment combining with aging on the microstructures and mechanical properties of Al-Mg-Ag alloys

The evolution of microstructure and mechanical properties during high-speed direct-chill casting in different Al–Mg2Si in situ composites

Effects of Ag on the age hardening response and intergranular corrosion resistance of Al-Mg alloys