林忠钦

期刊论文

1. 周济，朱高峰，王礼恒，邬贺铨，干勇，李培根，钟志华，林忠钦，尤政，陈建峰，陈学东，于海斌，杨华勇，王树新，王国庆，黄庆学，陈新，杨宏，屈贤明，周艳红，臧冀原（2026）. 高端化、智能化、绿色化、融合化——我国制造业创新发展的战略方向与技术路线. 《中国工程科学》, Vol. 28, No. 1.下载原文
2. 林忠钦，张纲，奚立峰，潘尔顺，赵亦希，李艳婷，朱颖，万曙峰（2026）. 我国优质制造建设十年成效与未来发展展望. 《中国工程科学》, Vol. 28, No. 1.下载原文
3. 樊宇薇，薛鸿祥，林忠钦，方梅，张延松，胡小才，陈震（2026）. 我国智能造船装备及产业化发展研究. 《中国工程科学》, Vol. 28, No. 4.下载原文
4. 陆海峰，王丹东，施骏业，潘园，尚明利，陈江平，林忠钦（2026）. 电动汽车宽温域行驶工况下整车能量流特性研究. 《传动技术(中英文)》.
5. Bowen Zhang, Weixuan Xu, Rundong Lu, Wenlong Xu, Shanqing Hu, Peihao Geng, Yu-Jun Xia, Hailang Wan, Y Y, Yongbing Li, Zhongqin Lin (2026). Insight into deformation and microstructure evolution in friction self-piercing riveting of cast aluminum alloys: enabling signal-based non-destructive quality monitoring. Journal of Manufacturing Processes.DOI
6. Yidi Wu, Jiaxun Li, Huihong Liu, Yongbing Li, Zhongqin Lin (2026). In-situ generation mechanism of mortise and tenon interlocking during friction stir spot welding of Cu/PI. Journal of Materials Research and Technology.DOI
7. Jiaxuan Chen, Zhuoran Li, Yujun Xia, Yongbing Li, Zhongqin Lin (2026). Improving resistance spot weldability of cast aluminum alloy and Al-Si coated press hardened steel by external magnetic field. Journal of Materials Processing Technology.DOI
8. Weilun Zheng, Zixuan Chen, Xuerui Wang, Bowen Zhang, Hailang Wan, Peng Li, Xiaojie Wang, Yunwu Ma, Yongbing Li, Zhongqin Lin (2026). Influence of die morphology on microstructure and mechanical performance of friction forge riveted aluminum alloy sheets. Materials & Design.DOI
9. 郑洁，卢明剑，程兵，柳存根，林忠钦（2025）. 我国海洋装备产业链高质量发展战略研究. 《中国工程科学》, Vol. 27, No. 2.下载原文
10. 林忠钦（2025）. 序. 《教学学术》.
11. Lingyu Zhang, Ji He, Shuhui Li, Zhongqin Lin (2025). Hybrid manufacturing for additively prepared 2024Al to repair micro defects and obtain heterogeneous bimodal grain structure. Thin-walled structures.DOI
12. Bowen Zhang, Yunwu Ma, Jiarui YUAN, Hailang Wan, Yunpeng Liu, Peihao Geng, Yongbing Li, Zhongqin Lin (2025). Directional fragmentation-to-aggregation mechanisms of oxide film in friction self-piercing riveting of anodized aluminum alloy. Chinese Journal of Aeronautics.DOI
13. Yidi Wu, Letong Wang, Jiaxun Li, Licheng Sun, Huihong Liu, Yongbing Li, Zhongqin Lin (2025). Fabricating sound copper/thermosetting polyimide joint via in-situ generated chemical bonding by chemical plating and hot pressing. Journal of Materials Research and Technology.DOI
14. Yidi Wu, Jiaxun Li, Zijie Huang, Fangzheng Shi, Licheng Sun, Huihong Liu, Gaoqiang Chen, Peng Li, Yongbing Li, Zhongqin Lin (2025). Joining copper to thermosetting polymer via “Mortise and Tenon” interlocking and chemical-bonding both in-situ generated during friction stir spot welding. Journal of Manufacturing Processes.DOI
15. 郭聪，江晟达，何霁，李淑慧，林忠钦（2024）. 碳纤维复合材料车门防撞梁多尺度高效变形模拟及实验验证. 《塑性工程学报》.
16. 周薇，张海霞，柳存根，林忠钦（2024）. 依托一流工程学科建设高校科技智库的难点、路径和策略. 《上海交通大学学报(哲学社会科学版)》, Vol. 32, No. 4.下载原文
17. 牛秀芳，张瑞岩，李进，林忠钦，夏明许（2024）. 黄河“几字弯”氢能交通发展模式思考. 《中国科技产业》.
18. 林忠钦（2024）. 加强基础研究，发挥科学家作用. 《中国科学基金》.
19. 蔡鹏，柳存根，林忠钦，卢明剑，付强，董胜，张旭光，刘曙光，冯妮，杨淑涵，张海霞（2024）. 海洋强国目标下我国海洋装备关键基础性技术发展战略研究. 《中国工程科学》, Vol. 26, No. 5.下载原文
20. 林忠钦，黄庆学，苑世剑，赵国群，华林，易幼平，詹梅，李淑慧，刘伟，王宝雨，陈军，王涛，李宏伟，黄亮，何祝斌，钟掘（2024）. 中国塑性成形技术和装备30年的重大突破与进展. 《塑性工程学报》.
21. 林忠钦（2024）. 守正创新三十载 凝心聚力撰新篇——《塑性工程学报》创刊30周年寄语. 《塑性工程学报》.
22. Guofeng Han, Ji He, Shuhui Li, Zhongqin Lin (2024). Simple shear methodology for local structure–property relationships of sheet metals: State-of-the-art and open issues. Progress in Materials Science.DOI
23. Bowen Zhang, Yunwu Ma, Feilong Yu, Yunpeng Liu, Entao Zhou, Zhilei Fan, Ende Ge, Yongbing Li, Zhongqin Lin (2024). Strengthening flat-die friction self-pierce riveting joints via manipulating stir zone geometry by tailored rivet structures. International Journal of Machine Tools and Manufacture.DOI
24. Yuqi Tian, Kai Yang, Yicong Wang, Jie Wang, Andrea S. Carlini, Zhinan Zhang, Yujun Deng, Jinyun Tan, Linfa Peng, Bo Yu, Zhongqin Lin (2024). Self-adaptive epidermal blood flow sensor for high-flux vascular access monitoring of hemodialysis patients. npj Flexible Electronics.DOI
25. 林忠钦，于忠奇，戴冬华，樊晓光，余圣甫，顾冬冬，李淑慧，史玉升（2023）. 复杂高筋薄壁构件旋压-增材复合制造技术发展与展望. 《航空学报》.
26. 田辰玲，杨建民，林忠钦，李欣，程正顺，柳存根（2023）. 我国南海资源开发装备发展研究. 《中国工程科学》, Vol. 25, No. 3.下载原文
27. 林忠钦（2023）. 构建大学科技创新环境 服务国家科技自立自强. 《研究与发展管理》, Vol. 35, No. 4.下载原文
28. 郑洁，杨淑涵，柳存根，王冲，林忠钦（2023）. 海洋可再生能源装备技术发展研究. 《中国工程科学》, Vol. 25, No. 3.下载原文
29. 林忠钦（2023）. 构筑新型国家质量体系 加快建设质量强国. 《上海质量》.
30. 林忠钦（2023）. 新型工业化背景下的质量变革. 《质量与认证》.
31. 林忠钦（2023）. 厚植家国情怀 为党和国家事业发展培育栋梁之才. 《上海教育》.
32. 樊宇薇，田辰玲，柳存根，林忠钦（2023）. 福建省海洋渔业数字化转型对策研究. 《海峡科学》.
33. Yichang Liu, Xiaoyu Huang, Yi Xiong, Mingdong Zhou, Zhongqin Lin (2023). Concurrent topology optimization of parts and their supports for additive manufacturing with thermal deformation constraint. Computers & Structures.DOI
34. He Shan, Yunwu Ma, Bingxin X. Yang, Qiaobo Feng, Yongbing Li, Zhongqin Lin (2023). Elucidation of interface joining mechanism of aluminum alloy/dual-phase steel friction stir riveting (FSR) joint. Journal of Materials Research and Technology.DOI
35. Yichang Liu, Zhanglong Lai, Yufan Lu, Mingdong Zhou, Zhongqin Lin (2023). Topology optimization of shell-infill structures considering buckling constraint. Computers & Structures.DOI
36. 陈源，李淑慧，李永丰，林忠钦（2022）. TA15钛合金应力松弛行为宏微耦合本构建模. 《机械工程学报》.
37. 林忠钦，王亚光，李智，张小丽，武岳（2022）. 需求引领 产教协同 培养卓越工程科技人才——上海交通大学的实践与探索. 《学位与研究生教育》, No. 10.下载原文
38. 林忠钦，奚立峰，夏唐斌，赵亦希，潘尔顺，李艳婷（2022）. 我国优质制造技术体系建设研究. 《中国工程科学》, Vol. 24, No. 2.下载原文
39. 林忠钦（2022）. 加快塑造中国制造的质量新优势. 《上海企业》.
40. Yuwen Zhu, Yujun Deng, Linfa Peng, Peiyun Yi, Xinmin Lai, Zhongqin Lin (2022). 3D thermodynamic optimal design of superhydrophobic surfaces using periodic microstructures.DOI
41. Yuwen Zhu, Andrea Giuntoli, Wengang Zhang, Zhongqin Lin, Sinan Keten, Francis W. Starr, Jack F. Douglas (2022). The effect of nanoparticle softness on the interfacial dynamics of a model polymer nanocomposite. The Journal of Chemical Physics.DOI
42. He Shan, Bingxin X. Yang, Yunwu Ma, Ming Lou, Qiaobo Feng, Yongbing Li, Zhongqin Lin (2022). Friction stud riveting (FSR) of thick high-strength aluminum alloy structure. International Journal of Machine Tools and Manufacture.DOI
43. Shi Xue Dou, Zhijian Jin, Jiangang Li, Zhongqin Lin, Xiaoming Xie, Qiuliang Wang (2022). Foreword. Superconductivity.DOI
44. Yuwen Zhu, Andrea Giuntoli, Nitin Krishnamurthy Hansoge, Zhongqin Lin, Sinan Keten (2022). Scaling for the inverse thickness dependence of specific penetration energy in polymer thin film impact tests. Journal of the Mechanics and Physics of Solids.DOI
45. Zhongqin Lin, Lifeng Xi, Tangbin Xia, Yixi Zhao, Ershun Pan, Yanting Li (2022). Development of Technology System for High-Quality Manufacturing in China. Strategic Study of CAE.DOI
46. 林忠钦（2021）. 序言. 《上海交通大学学报》.
47. 李新碗，林忠钦（2021）. 图书馆要充分做好自己的主责主业——上海交通大学李新碗馆长采访林忠钦校长访谈录. 《大学图书馆学报》, No. 6.下载原文
48. 杨卫，龚旗煌，杨斌，金东寒，林忠钦，葛道凯，周光礼，阎光才，别敦荣（2021）. 《第五轮学科评估工作方案》专家解读. 《大学与学科》.
49. 王丽伟，吴静怡，张执南，奚立峰，林忠钦（2021）. 构建面向未来的工程教育体系. 《高等工程教育研究》.
50. 于忠奇，王凤琪，戴冬华，顾冬冬，李淑慧，林忠钦（2021）. 带筋薄壁筒体类构件流动旋压技术研究进展. 《塑性工程学报》.
51. 林忠钦（2021）. 研究型大学科技创新平台的现状与发展思考. 《民主与科学》.
52. 干勇，尹伟伦，王海舟，陈学东，范维澄，林忠钦，欧阳志云（2021）. 支撑高质量发展的标准体系战略研究. 《中国工程科学》, Vol. 23, No. 3.下载原文
53. 冯怡爽，何霁，韩国丰，李淑慧，林忠钦（2021）. 金属板材塑性本构关系的深度学习预测方法及建模. 《塑性工程学报》.
54. 林忠钦（2021）. 明确目标砥砺奋进,为国家和上海市发展作更大贡献. 《上海教育》.
55. 马运五，林忠钦，李永兵（2021）. 自冲摩擦铆焊机械-固相复合连接机理及应用研究. 《金属加工(冷加工)》.
56. 林忠钦（2021）. 客座主编寄语——《材料成形本构和失效模型专题》. 《塑性工程学报》.
57. Mingdong Zhou, Yufan Lu, Yichang Liu, Zhongqin Lin (2021). Concurrent topology optimization of shells with self-supporting infills for additive manufacturing. Computer Methods in Applied Mechanics and Engineering.DOI
58. Shanqing Hu, Amberlee S. Haselhuhn, Yunwu Ma, Zhuoran Li, Lin Qi, Yongbing Li, Blair E. Carlson, Zhongqin Lin (2021). Effect of external magnetic field on resistance spot welding of aluminium to steel. Science and Technology of Welding & Joining.DOI
59. Jie Gao, Yujun Deng, Linfa Peng, Peiyun Yi, Zhongqin Lin (2021). Water-repellent hierarchical microstructured PTFE films via micro powder hot embossing. Journal of Materials Processing Technology.DOI
60. Shanqing Hu, Amberlee S. Haselhuhn, Yunwu Ma, Yongbing Li, Blair E. Carlson, Zhongqin Lin (2021). Sensitivity of dissimilar aluminum to steel resistance spot welds to weld gun deflection. Journal of Manufacturing Processes.DOI
61. Yuan Chen, Guofeng Han, Shuhui Li, Yanze Li, Zhiqiang Li, Zhongqin Lin (2021). Time-dependent springback prediction with stress relaxation effect for non-isothermal hot stamping of titanium alloy sheets. The International Journal of Advanced Manufacturing Technology.DOI
62. Weixin Zhang, Jie Gao, Yujun Deng, Linfa Peng, Peiyun Yi, Xinmin Lai, Zhongqin Lin (2021). Tunable Superhydrophobicity from 3D Hierarchically Nano‐Wrinkled Micro‐Pyramidal Architectures. Advanced Functional Materials.DOI
63. He Shan, Yunwu Ma, Sizhe Niu, Bingxin X. Yang, Ming Lou, Yongbing Li, Zhongqin Lin (2021). Friction stir riveting (FSR) of AA6061-T6 aluminum alloy and DP600 steel. Journal of Materials Processing Technology.DOI
64. Yuan Chen, Shuhui Li, Yanze Li, Yaoqi Wang, Zhiqiang Li, Zhongqin Lin (2021). Constitutive modeling of TA15 alloy sheet coupling phase transformation in non-isothermal hot stamping process. Journal of Materials Research and Technology.DOI
65. Yichang Liu, Mingdong Zhou, Chuang Wei, Zhongqin Lin (2021). Topology optimization of self-supporting infill structures. Structural and Multidisciplinary Optimization.DOI
66. Bin FENG, Ji Lin He, Shuhui Li, Bin Gu, Zhongqin Lin (2021). Sheet metal forging process for thin-walled structures with crossed ribs: process design, simulation and a forming experiment. Metal ....DOI
67. 林忠钦（2020）. 加快推进大学人才培养体系改革. 《中国科技奖励》.
68. 杨建民，刘磊，吕海宁，林忠钦（2020）. 我国深海矿产资源开发装备研发现状与展望. 《中国工程科学》, Vol. 22, No. 6.下载原文
69. 林忠钦，柴洪峰（2020）. 卷首语. 《中国工程科学》.
70. 余海东，来新民，林忠钦（2020）. 航天大型薄壁结构装配制造尺寸精度预测与控制方法. 《上海航天(中英文)》.DOI
71. 郑洁，柳存根，林忠钦（2020）. 绿色船舶低碳发展趋势与应对策略. 《中国工程科学》, Vol. 22, No. 6.下载原文
72. American Welding Society, Shanqing Hu, Yunwu Ma, Yongbing Li, ZHONGQIN LIN, Amberlee S. Haselhuhn, Blair E. Carlson (2020). Comparison of the Resistance Spot Weldability of AA5754 and AA6022 Aluminum to Steels. Welding Journal.DOI
73. Shanqing Hu, Amberlee S. Haselhuhn, Yunwu Ma, Yongbing Li, Blair E. Carlson, Zhongqin Lin (2020). Influencing mechanism of inherent aluminum oxide film on coach peel performance of baked Al-Steel RSW. Materials & Design.DOI
74. Jie Gao, Linfa Peng, Yujun Deng, Peiyun Yi, Zhongqin Lin (2020). Experimental studies on micro powder hot embossing for high-aspect-ratio microstructures with ultra-high molecular weight polyethylene powders. Journal of Micromechanics and Microengineering.DOI
75. Yunwu Ma, He Shan, Sizhe Niu, Yongbing Li, Zhongqin Lin, Ninshu Ma (2020). A Comparative Study of Friction Self-Piercing Riveting and Self-Piercing Riveting of Aluminum Alloy AA5182-O. Engineering.DOI
76. 邓宇君，林忠钦，傅铭旺（2019）. 聚合物微结构成形的介观尺度效应及其本构建模. 《机械工程学报》.
77. 王海丽，夏天娟，郑虹，李新，蒋祖华，林忠钦（2019）. 加强在职专业学位硕士学位论文过程管理保证论文质量. 《高教学刊》.DOI
78. 顾彬，何霁，李淑慧，林忠钦（2019）. 金属板料各向异性断裂模型及断裂实验研究进展. 《塑性工程学报》.
79. 林忠钦，赵亦希，潘尔顺（2019）. 中国制造业企业质量管理蓝皮书(2018) 第五章 中国实现优质制造的思考. 《中国制造业企业质量管理蓝皮书（2018）》.DOI
80. 蒋祖华，林忠钦，王海丽，夏天娟，郑虹，裴海燕（2019）. 我国工程硕士培养和专业发展的调查分析. 《高教学刊》.DOI
81. Yuwen Zhu, Yujun Deng, Peiyun Yi, Linfa Peng, Xinmin Lai, Zhongqin Lin (2019). Flexible Transparent Electrodes Based on Silver Nanowires: Material Synthesis, Fabrication, Performance, and Applications. Advanced Materials Technologies.DOI
82. Bin Gu, Ji Lin He, Shuhui Li, Zhongqin Lin (2019). Anisotropic fracture modeling of sheet metals: From in-plane to out-of-plane. International Journal of Solids and Structures.DOI
83. Guotao Zhang, Hang Zhao, Xianghe Xu, Guohua Qiu, Yongbing Li, Zhongqin Lin (2019). Metallic bump assisted resistance spot welding (MBaRSW) of AA6061-T6 and bare DP590: Part I-printing of metallic bump. Journal of Manufacturing Processes.DOI
84. Guotao Zhang, Hang Zhao, Xianghe Xu, Guohua Qiu, Yongbing Li, Zhongqin Lin (2019). Metallic bump assisted resistance spot welding (MBaRSW) of AA6061-T6 and Bare DP590: Part II-joining mechanism and joint property. Journal of Manufacturing Processes.DOI
85. Mingdong Zhou, Yichang Liu, Zhongqin Lin (2019). Topology optimization of thermal conductive support structures for laser additive manufacturing. Computer Methods in Applied Mechanics and Engineering.DOI
86. Yunwu Ma, Yongbing Li, Zhongqin Lin (2019). Joint Formation and Mechanical Performance of Friction Self-Piercing Riveted Aluminum Alloy AA7075-T6 Joints. Journal of Manufacturing Science and Engineering.DOI
87. 林忠钦，赵亦希，潘尔顺（2018）. 中国汽车制造质量提升战略研究. 《中国工程科学》, Vol. 20, No. 1.下载原文
88. 赵亦希，潘尔顺，李艳婷，奚立峰，林忠钦（2018）. 政府职能与市场功能在推动质量发展中的定位与作用. 《中国市场监管研究》.
89. 林忠钦（2018）. 对我国工科教育的认识与思考. 《中国科技产业》.
90. 林忠钦，徐瑞哲（2018）. 进一步巩固和加强高等教育优势地位. 《解放日报》.
91. 林忠钦（2018）. 早日占据智能船舶领域制高点. 《中国船检》.
92. Yujun Deng, Jin Wang, Peiyun Yi, Linfa Peng, Xinmin Lai, Zhongqin Lin (2018). Numerical Studies on Size Effect Behaviors of Glassy Polymers Based on Strain Gradient Elastoviscoplastic Model. Journal of Applied Mechanics.DOI
93. Yunwu Ma, GuanZhong He, Ming Lou, Yongbing Li, Zhongqin Lin (2018). Effects of Process Parameters on Crack Inhibition and Mechanical Interlocking in Friction Self-Piercing Riveting of Aluminum Alloy and Magnesium Alloy. Journal of Manufacturing Science and Engineering.DOI
94. Yunwu Ma, Ming Lou, Yongbing Li, Zhongqin Lin (2018). Modeling and experimental validation of friction self-piercing riveted aluminum alloy to magnesium alloy. Welding in the World.DOI
95. Genliang Chen, Hao Wang, Zhongqin Lin, Xinmin Lai (2018). Identification of Canonical Basis of Screw Systems Using General-Special Decomposition. Journal of Mechanisms and Robotics.DOI
96. Shuhui Li, Ji Lin He, Bin Gu, Danielle Zeng, Z. Cedric Xia, Yixi Zhao, Zhongqin Lin (2018). Anisotropic fracture of advanced high strength steel sheets: Experiment and theory. International Journal of Plasticity.DOI
97. Yunwu Ma, Yongbing Li, Blair E. Carlson, Zhongqin Lin (2018). Effect of Process Parameters on Joint Formation and Mechanical Performance in Friction Stir Blind Riveting of Aluminum Alloys. Journal of Manufacturing Science and Engineering.DOI
98. 何俊艺，王贺，彭林法，易培云，来新民，林忠钦 (2017). Investigation of Springback Behavior and Process Control for Stamping of Ring-Shaped Workpiece. Journal of Shanghai Jiaotong University(Science).
99. 林忠钦，奚立峰，蒋家东，郭政，刘颖，潘尔顺，赵亦希，李艳婷（2017）. 中国制造业质量与品牌发展战略研究. 《中国工程科学》, Vol. 19, No. 3.下载原文
100. 林忠钦（2017）. “中国制造”质量提升面临的困境. 《政策》.
101. Genliang Chen, Lingyu Kong, Qinchuan Li, Hao Wang, Zhongqin Lin (2017). Complete, minimal and continuous error models for the kinematic calibration of parallel manipulators based on POE formula. Mechanism and Machine Theory.DOI
102. Zhaozhao Wang, Linfa Peng, Zhongqin Lin, Jun Ni, Peiyun Yi, Xinmin Lai, Xiaolong He, Zeyu Lei (2017). Flexible Semiconductor Technologies with Nanoholes-Provided High Areal Coverages and Their Application in Plasmonic-Enhanced Thin Film Photovoltaics. Scientific Reports.DOI
103. Genliang Chen, Weidong Yu, Chao Chen, Hao Wang, Zhongqin Lin (2017). A new approach for the identification of reciprocal screw systems and its application to the kinematics analysis of limited-DOF parallel manipulators. Mechanism and Machine Theory.DOI
104. Yunwu Ma, Ming Lou, Yongbing Li, Zhongqin Lin (2017). Effect of rivet and die on self-piercing rivetability of AA6061-T6 and mild steel CR4 of different gauges. Journal of Materials Processing Technology.DOI
105. Qingshuai Kong, Zhongqi Yu, Yixi Zhao, Hao Wang, Zhongqin Lin (2017). A study of severe flange wrinkling in first-pass conventional spinning of hemispherical part. The International Journal of Advanced Manufacturing Technology.DOI
106. Yunwu Ma, Xi-rui XIAN, Ming Lou, Yongbing Li, Zhongqin Lin (2017). Friction Self-Piercing Riveting (F-SPR) of Dissimilar Materials. Procedia Engineering.DOI
107. 李永兵，马运五，楼铭，雷海洋，林忠钦（2016）. 轻量化多材料汽车车身连接技术进展. 《机械工程学报》.
108. 郑斌，余海东，林忠钦，邹成（2016）. 铝锂合金薄板自动钻铆残余应力特性. 《上海交通大学学报》.
109. Bin Zheng, Haidong Yu, Xinmin Lai, Zhongqin Lin (2016). Analysis of Residual Stresses Induced by Riveting Process and Fatigue Life Prediction. Journal of Aircraft.DOI
110. Qingshuai Kong, Zhongqi Yu, Yixi Zhao, Hao Wang, Zhongqin Lin (2016). Theoretical prediction of flange wrinkling in first-pass conventional spinning of hemispherical part. Journal of Materials Processing Technology.DOI
111. Yunwu Ma, Yongbing Li, Wei Hu, Ming Lou, Zhongqin Lin (2015). Modeling of Friction Self-Piercing Riveting of Aluminum to Magnesium. Journal of Manufacturing Science and Engineering.DOI
112. Haiyang Lei, Yongbing Li, Blair E. Carlson, Zhongqin Lin (2015). Microstructure and Mechanical Performance of Cold Metal Transfer Spot Joints of AA6061-T6 to Galvanized DP590 Using Edge Plug Welding Mode. Journal of Manufacturing Science and Engineering.DOI
113. Lina Zhang, Hua Wang, Shuhui Li, Zhongqin Lin (2015). Variation propagation modeling and pattern mapping method for aircraft assembly structure considering residual stress from manufacturing process. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
114. Yujun Deng, Peiyun Yi, Linfa Peng, Xinmin Lai, Zhongqin Lin (2015). Flow behavior of polymers during the roll-to-roll hot embossing process. Journal of Micromechanics and Microengineering.DOI
115. Shunzhou Huang, Hao Wang, Yong Zhao, Zhongqin Lin (2015). An analytical representation of conformal mapping for genus-zero implicit surfaces and its application to surface shape similarity assessment. Computer-Aided Design.DOI
116. Genliang Chen, Hao Wang, Zhongqin Lin, Xinmin Lai (2015). The Principal Axes Decomposition of Spatial Stiffness Matrices. IEEE Transactions on Robotics.DOI
117. Haiyang Lei, Yongbing Li, Blair E. Carlson, Zhongqin Lin (2014). Cold Metal Transfer Spot Joining of AA6061-T6 to Galvanized DP590 Under Different Modes. Journal of Manufacturing Science and Engineering.DOI
118. Zhongqi Yu, Qingshuai Kong, MA Chang-hong, Zhongqin Lin (2014). Theoretical and experimental study on formability of laser seamed tube hydroforming. The International Journal of Advanced Manufacturing Technology.DOI
119. Lina Zhang, Hua Wang, Shuhui Li, Zhongqin Lin (2014). Quantitative Modeling and Decoupling Method for Assembly Deformation Analysis Considering Residual Stress from Manufacturing Process. Journal of Aerospace Engineering.DOI
120. Genliang Chen, Hao Wang, Zhongqin Lin (2014). Determination of the Identifiable Parameters in Robot Calibration Based on the POE Formula. IEEE Transactions on Robotics.DOI
121. Yujun Deng, Peiyun Yi, Linfa Peng, Xinmin Lai, Zhongqin Lin (2014). Experimental investigation on the large-area fabrication of micro-pyramid arrays by roll-to-roll hot embossing on PVC film. Journal of Micromechanics and Microengineering.DOI
122. Linfa Peng, Jianming Mai, Tianhao Jiang, Xinmin Lai, Zhongqin Lin (2014). Experimental Investigation of Tensile Properties of SS316L and Fabrication of Micro/Mesochannel Features by Electrical-Assisted Embossing Process. Journal of Micro and Nano-Manufacturing.DOI
123. Shunzhou Huang, Yong Zhao, Hao Wang, Zhongqin Lin (2014). Stabilized multi-domain simulation algorithms and their application in simulation platform for forging manipulator. Chinese Journal of Mechanical Engineering.DOI
124. 高晶，刘克素，于忠奇，林忠钦（2013）. 双相钢板成形界面压力数值仿真及对板料表面损伤影响. 《上海交通大学学报》.
125. Yongbing Li, Yongbing Li, Zeyu Wei, YaTing Li, YaTing Li, Qi Shen, Zhongqin Lin (2013). Effects of cone angle of truncated electrode on heat and mass transfer in resistance spot welding. International Journal of Heat and Mass Transfer.DOI
126. Yong Zhao, Genliang Chen, Hao Wang, Zhongqin Lin (2013). Optimum selection of mechanism type for heavy manipulators based on particle swarm optimization method. Chinese Journal of Mechanical Engineering.DOI
127. Genliang Chen, Hao Wang, Zhongqin Lin (2013). A unified approach to the accuracy analysis of planar parallel manipulators both with input uncertainties and joint clearance. Mechanism and Machine Theory.DOI
128. Zhongqin Lin (2013). Digital Methods of Complex Product Manufacturing Precision Control and Its Development Trend. Journal of Mechanical Engineering.DOI
129. Genliang Chen, Hao Wang, Zhongqin Lin (2013). Optimal Kinematic Calibration of the 6-UPS Parallel Manipulator. Lecture notes in computer science.DOI
130. 张骥超，刘罡，林忠钦，高伟，李淑慧（2012）. 侧围外板冲压工艺稳健性优化设计. 《上海交通大学学报》.
131. Sun Jin, Yinhua Liu, Zhongqin Lin (2012). A Bayesian network approach for fixture fault diagnosis in launch of the assembly process. International Journal Of Production Research, Vol. 500, No. 23.DOI
132. Jianming Mai, Linfa Peng, Xinmin Lai, Zhongqin Lin (2012). Electrical-assisted embossing process for fabrication of micro-channels on 316L stainless steel plate. Journal of Materials Processing Technology.DOI
133. Yong Zhao, Hao Wang, Haidong Yu, Xinmin Lai, Zhongqin Lin (2012). A stiffness-matching based evaluation approach for compliance of mechanical systems in shield tunneling machines. Science China Technological Sciences.DOI
134. Zhi-Min Li, Zhongqin Lin (2012). Thermal postbuckling of shear-deformable anisotropic laminated cylindrical shells with temperature-dependent properties. International Journal of Non-Linear Mechanics.DOI
135. Shuhui Li, Xianfeng Chen, Qingshuai Kong, Zhongqi Yu, Zhongqin Lin (2012). Study on formability of tube hydroforming through elliptical die inserts. Journal of Materials Processing Technology.DOI
136. Genliang Chen, Hao Wang, Zhongqin Lin (2012). Generalized kinematic mapping of constrained plane motions and its application to the accuracy analysis of general planar parallel robots. Mechanism and Machine Theory.DOI
137. He Wang, Xiaowei Zhu, Hui Wang, S. Jack Hu, Zhongqin Lin, Guanlong Chen (2011). Multi-objective optimization of product variety and manufacturing complexity in mixed-model assembly systems. Journal Of Manufacturing Systems, Vol. 300, No. 1.DOI
138. 沈琦，李永兵，陈关龙，林忠钦（2011）. 永磁体磁场对双相高强钢电阻点焊质量的影响. 《焊接学报》.
139. 王武荣，游洁，张新鹏，李淑慧，林忠钦（2011）. 基于材料性能波动统计学分析的特征件冲压成形稳健设计. 《上海交通大学学报》.
140. Xing Hu, Yixi Zhao, Sheng Huang, Shuhui Li, Zhongqin Lin (2011). Numerical analysis of the roller hemming process. The International Journal of Advanced Manufacturing Technology.DOI
141. Xianfeng Chen, Shuhui Li, Zhongqi Yu, Zhongqin Lin (2011). Study on experimental approaches of forming limit curve for tube hydroforming. The International Journal of Advanced Manufacturing Technology.DOI
142. Vincent Buchet, Lin Fa Peng, Diankai Qiu, Xin Min Lai, Zhongqin Lin (2011). Numerical Modelling & Elastomeric Gasket Design for PEMFC Stacks. Advanced materials research.DOI
143. Xianfeng Chen, Zhongqi Yu, Bo Hou, Shuhui Li, Zhongqin Lin (2011). A theoretical and experimental study on forming limit diagram for a seamed tube hydroforming. Journal of Materials Processing Technology.DOI
144. Xing Hu, Yixi Zhao, Shuhui Li, Zhongqin Lin (2011). Numerical simulation of ductile fracture behavior for aluminum alloy sheet under cyclic plastic deformation. Transactions of Nonferrous Metals Society of China.DOI
145. Yinhua Liu, Sun Jin, Zhongqin Lin, Cheng Zheng, Kuigang Yu (2011). Optimal sensor placement for fixture fault diagnosis using Bayesian network. Assembly Automation.DOI
146. Zhi-Min Li, Zhongqin Lin, Guanlong Chen (2011). Postbuckling of Shear Deformable Geodesically Stiffened Anisotropic Laminated Cylindrical Shell Under External Pressure. Journal of Pressure Vessel Technology.DOI
147. Hao Wang, Kai Zhao, Genliang Chen, Zhongqin Lin (2011). Energy Distribution Index for robot manipulators and its application to buffering capability evaluation. Science China Technological Sciences.DOI
148. Jianming Mai, Linfa Peng, Zhongqin Lin, Xinmin Lai (2011). Experimental study of electrical resistivity and flow stress of stainless steel 316L in electroplastic deformation. Materials Science and Engineering A.DOI
149. Xianfeng Chen, Zhongqin Lin, Zhongqi Yu, Xinping Chen, Shuhui Li (2011). Prediction of Forming Limit Diagram for Seamed Tube Hydroforming Based on Thickness Gradient Criterion. AIP conference proceedings.DOI
150. Genliang Chen, Hao Wang, Zhongqin Lin (2011). Forward Dynamics of the 6-PUS Parallel Manipulator Based on the Force Coupling and Geometry Constraint of the Passive Joints. Journal of System Design and Dynamics.DOI
151. Zhongqin Lin (2011). Impact of external magnetic field generated by permanent magnet on quality of dual phase high strength steel by resistance spot welding. Transactions of the China Welding Institution.
152. Zhongqin Lin (2011). Prediction Model for Forming Limit of Welded Tube Hydroforming.
153. 赵凯，王皓，陈关龙，林忠钦，何永波（2010）. 自由锻造操作机顺应过程分析. 《机械工程学报》.
154. Linfa Peng, Jianming Mai, Peng Fei Hu, Xinmin Lai, Zhongqin Lin (2010). Optimum design of the slotted-interdigitated channels flow field for proton exchange membrane fuel cells with consideration of the gas diffusion layer intrusion. Renewable Energy.DOI
155. Shuhui Li, Xing Hu, Yixi Zhao, Zhongqin Lin, Nanqiao Xu (2010). Cyclic hardening behavior of roller hemming in the case of aluminum alloy sheets. Materials & Design (1980-2015).DOI
156. Hao Wang, Peter Eberhard, Zhongqin Lin (2010). Modeling and simulation of closed loop multibody systems with bodies-joints composite modules. Multibody System Dynamics.DOI
157. Zhi-Min Li, Ping Zhu, Zhongqin Lin (2010). Nonlinear bending behavior of 3D braided rectangular plates subjected to transverse loads in thermal environments. Archive of Applied Mechanics.DOI
158. Hao Wang, Genliang Chen, Yong Sheng Zhao, Zhongqin Lin (2010). Output error bound prediction of parallel manipulators based on the level set method. Mechanism and Machine Theory.DOI
159. Yongbing Li, Zhongqin Lin, Xinmin Lai, Guanlong Chen, Ke‐Shi Zhang (2010). Induced electromagnetic stirring behavior in a resistance spot weld nugget. Science China Technological Sciences.DOI
160. Wurong Wang, Guanlong Chen, Zhongqin Lin (2010). Application of new VBHF optimization strategy to improve formability of automobile panels with aluminum alloy sheet. Transactions of Nonferrous Metals Society of China.DOI
161. Wurong Wang, Kai Zhao, Zhongqin Lin, Hao Wang (2010). Erratum to: Evaluating interactions between the heavy forging process and the assisting manipulator combining FEM simulation and kinematics analysis. The International Journal of Advanced Manufacturing Technology.DOI
162. Qiu Ma, Xuming Su, Patricia C. Tibbenham, Xinmin Lai, Zhongqin Lin (2010). Mechanical Properties of Thermoplastic Olefin Composites: Effect of Fillers Content, Strain Rate and Temperature. Polymer-Plastics Technology and Engineering.DOI
163. Hao Wang, Zhongqin Lin, Kai Zhao, Genliang Chen (2010). Buffering Indices for Robot Manipulators Based on the Energy Distribution. Lecture notes in computer science.DOI
164. 杜设亮，林忠钦（2009）. 基于仿生学车身制造偏差的有限元分析. 《上海交通大学学报》.
165. 王武荣，陈关龙，林忠钦（2009）. 大型锻件操作装备机锻耦合仿真分析. 《上海交通大学学报》.
166. 侯波，于忠奇，李淑慧，林忠钦（2009）. 温成形中铝合金板成形极限图的预测研究. 《材料科学与工艺》.
167. 林忠钦，林忠钦 李淑慧 王武荣 来新民（2009）. 汽车板精益成形技术. 《中国工程科学》, Vol. 11, No. 11.下载原文
168. Tian Zhaoqing, Lai Xinmin, Lin Zhongqin (2009). Robust fixture layout design for multi-station sheet metal assembly processes using a genetic algorithm. International Journal Of Production Research, Vol. 470, No. 21.DOI
169. Zhongqin Lin (2009). Forward Dynamics Analysis of the 6-PUS Mechanism Based on Platform-Legs Composite Simulation. 《中国机械工程学报：英文版》.
170. Qiu Ma, Xuming Su, Zhongqin Lin, John V. Lasecki, Xinmin Lai (2009). A constitutive model for the nonlinear viscoplastic behavior of thermoplastic olefin. Polymer Composites.DOI
171. Sun Jin, Wayne Cai, Xinmin Lai, Zhongqin Lin (2009). Design automation and optimization of assembly sequences for complex mechanical systems. The International Journal of Advanced Manufacturing Technology.DOI
172. Zhi-Min Li, Zhongqin Lin, Guanlong Chen (2009). Nonlinear Buckling and Postbuckling Behavior of 3D Braided Composite Cylindrical Shells Under External Pressure Loads in Thermal Environments. Journal of Pressure Vessel Technology.DOI
173. Wurong Wang, Bo Hou, Zhongqin Lin, Z. Cedric Xia (2009). An Engineering Approach to Improve the Stamping Robustness of High Strength Steels. Journal of Manufacturing Science and Engineering.DOI
174. Wurong Wang, Kai Zhao, Zhongqin Lin, Hao Wang (2009). Evaluating interactions between the heavy forging process and the assisting manipulator combining FEM simulation and kinematics analysis. The International Journal of Advanced Manufacturing Technology.DOI
175. Zhi-Min Li, Zhongqin Lin (2009). Non-linear buckling and postbuckling of shear deformable anisotropic laminated cylindrical shell subjected to varying external pressure loads. Composite Structures.DOI
176. Di Li, Zhongqin Lin (2009). h-Adaptive Analysis Based on Meshless Local Petrov-Galerkin Method with B Spline Wavelet for Plates and Shells. Acta Mechanica Solida Sinica.DOI
177. Xianghe Xu, Weigang Zhang, Shuhui Li, Zhongqin Lin (2009). Study of tube hydroforming in a trapezoid-sectional die. Thin-Walled Structures.DOI
178. Yingke Hou, Zhongqi Yu, Weigang Zhang, Jiang Hao-min, Zhongqin Lin (2009). Surface topography evolvement of galvanized steels in sheet metal forming. Transactions of Nonferrous Metals Society of China.DOI
179. Guo Zeng, Xinmin Lai, Zhongqi Yu, Zhongqin Lin (2009). Numerical Simulation and Sensitivity Analysis of Parameters for Multistand Roll Forming of Channel Section With Outer Edge. Journal of Iron and Steel Research International.DOI
180. Genliang Chen, Hao Wang, Kai Zhao, Zhongqin Lin (2009). Modular Calculation of the Jacobian Matrix and Its Application to the Performance Analyses of a Forging Robot. Advanced Robotics.DOI
181. Genliang Chen, Hao Wang, Yong Zhao, Zhongqin Lin (2009). A Kind of Kinematically Redundant Planar Parallel Manipulator for Optimal Output Accuracy.DOI
182. He Wang, Xiaowei Zhu, S. Jack Hu, Zhongqin Lin, Guanlong Chen (2009). Product Family Design to Minimize Manufacturing Complexity in Mixed-Model Assembly Systems. ASME International Manufacturing Science and Engineering Conference (MSEC).DOI
183. Yongbing Li, Zhongqin Lin, Li Li, Guan Long Chen (2009). Numerical Analysis of Transport Phenomena in Resistance Spot Welding Process.DOI
184. Zhongqin Lin (2009). A statistics analysis for variable behavior of homemade auto steels' properties. Suxing gongcheng xuebao.
185. 周江奇，练朝春，姚佐平，黄玮，林忠钦，朱文峰（2008）. 实例推理技术在解决车身制造问题中的应用. 《计算机集成制造系统》.
186. 钱昌明，林忠钦，杜伟国，陈关龙（2008）. 伺服焊枪车身点焊质量在线评价. 《上海交通大学学报》.
187. 施欲亮，朱平，张宇，沈利冰，林忠钦（2008）. 提高汽车碰撞仿真计算效率的网格规模控制方法. 《上海交通大学学报》.
188. 韩旭，余海东，郭永进，林忠钦（2008）. 基于壁板声学贡献分析的轿车乘员室声场降噪研究. 《上海交通大学学报》.
189. 侯英岢，张卫刚，于忠奇，林忠钦（2008）. 高强度钢板成形中零件表面损伤实验. 《上海交通大学学报》.
190. 曾国，来新民，于忠奇，林忠钦（2008）. 多道次辊弯成形动力显式仿真的虚拟速度. 《上海交通大学学报》.
191. 林忠钦，侧卫（2008）. 林忠钦 著名汽车工程专家. 《航空制造技术》.
192. Zhongqi Yu, Qiu Ma, Zhongqin Lin (2008). Simulation and analysis of microstructure evolution of IN718 in rotary forgings by FEM. Journal of Shanghai Jiaotong University (Science).DOI
193. Guo Zeng, Xinmin Lai, Zhongqi Yu, Zhongqin Lin (2008). Sensitivity analysis of parameters for multi-stand roll forming using a new booting model. Journal of Shanghai Jiaotong University (Science).DOI
194. Shuhui Li, Xianghe Xu, Weigang Zhang, Zhongqin Lin (2008). Study on the crushing and hydroforming processes of tubes in a trapezoid-sectional die. The International Journal of Advanced Manufacturing Technology.DOI
195. Yong Chen, Wen-Ming Miao, Zhongqin Lin, Guanlong Chen (2008). Adjusting MRP for dynamic differentiation of identical items for process customisation. Production Planning & Control.DOI
196. Yongbing Li, Zhongqin Lin, S. Jack Hu, Guanlong Chen (2008). Magnetohydrodynamic behaviors in a resistance spot weld nugget under different welding currents. Science China Technological Sciences.DOI
197. Wurong Wang, Guanlong Chen, Zhongqin Lin (2008). The study on the fatigue FEM analysis considering the effect of stamping. Materials & Design (1980-2015).DOI
198. Jun He, Yongjin Guo, Zhongqin Lin (2008). Numerical and experimental analysis of thermosonic bond strength considering interfacial contact phenomena. Journal of Physics D Applied Physics.DOI
199. Hao Wang, Zhongqin Lin, Xinmin Lai (2008). Composite modeling method in dynamics of planar mechanical system. Science China Technological Sciences.DOI
200. Di Li, Zhongqin Lin, Shuhui Li (2008). Numerical Analysis of Mindlin Shell by Meshless Local Petrov-Galerkin Method. Acta Mechanica Solida Sinica.DOI
201. Xianghe Xu, Shuhui Li, Weigang Zhang, Zhongqin Lin (2008). Analysis of thickness distribution of square-sectional hydroformed parts. Journal of Materials Processing Technology.DOI
202. Hongtao Li, Xinmin Lai, Chengfeng Li, Zhongqin Lin, Jiancheng Miao, Jun Ni (2008). Development of meso-scale milling machine tool and its performance analysis. Frontiers of Mechanical Engineering in China.DOI
203. Qiu Ma, Zhongqin Lin, Zhongqi Yu (2008). Prediction of deformation behavior and microstructure evolution in heavy forging by FEM. The International Journal of Advanced Manufacturing Technology.DOI
204. Genliang Chen, Hao Wang, Zhongqin Lin, Guimin Liu (2008). Performance Analysis of a Forging Manipulator Based on the Composite Modeling Method. Lecture notes in computer science.DOI
205. Zhongqin Lin (2008). Calculation of single crystal yield surfaces formed by texture components of aluminum. Suxing gongcheng xuebao.
206. 余海东，林忠钦，张克实，郭永进（2007）. 基于多孔洞体胞模型的韧性材料损伤机制. 《上海交通大学学报》.
207. 田兆青，来新民，林忠钦（2007）. 基于敏感度分析的多工位薄板装配过程测点优化设计. 《中国机械工程》.
208. 胥志刚，林忠钦，来新民，王皓（2007）. 面向车身结构轻量化设计的水平集拓扑优化. 《上海交通大学学报》.
209. 韦俊民，金隼，林忠钦，来新民（2007）. 产品族设计中的零件相似性评价方法. 《上海交通大学学报》.
210. 田兆青，来新民，林忠钦（2007）. 面向过程的多工位薄板装配公差综合. 《上海交通大学学报》.
211. 韩旭，朱平，余海东，郭永进，林忠钦，高新华，顾镭，杨晋，徐有忠（2007）. 基于刚度和模态性能的轿车车身轻量化研究. 《汽车工程》.
212. 马秋，林忠钦，于忠奇（2007）. IN718合金多步锻造过程中微观组织演变数值模拟. 《上海交通大学学报》.
213. 王武荣，陈关龙，林忠钦（2007）. 基于破裂失效准则的变压边力理论及其工程应用. 《上海交通大学学报》.
214. 王武荣，陈关龙，林忠钦，李淑慧（2007）. 基于PID闭环控制的变压边力优化设计. 《上海交通大学学报》.
215. Shuhui Li, Bing Yang, Weigang Zhang, Zhongqin Lin (2007). Loading path prediction for tube hydroforming process using a fuzzy control strategy. Materials & Design (1980-2015).DOI
216. Ti Kun Shan, Wei Gang Zhang, Zhongqin Lin, Shu Hui Li (2007). The Effect of Macroscopic Stress State on Transformation Rate in TRIP-Assisted Steels. Key engineering materials.DOI
217. Zhongqi Yu, Zhongqin Lin (2007). Numerical analysis of dimension precision of U-shaped aluminium profile rotary stretch bending. Transactions of Nonferrous Metals Society of China.DOI
218. Zhong Qi Yu, Zhongqin Lin, Yu Ying Yang (2007). Prediction of Fracture in Square-Cup Forming of Aluminium Alloy. Materials science forum.DOI
219. Yongbing Li, Zhongqin Lin, S. Jack Hu, Guan Long Chen (2007). Numerical analysis of magnetic fluid dynamics behaviors during resistance spot welding. Journal of Applied Physics.DOI
220. Xinhua Liang, Ping Zhu, Zhongqin Lin, Yan Zhang (2007). Acoustic analysis of lightweight auto-body based on finite element method and boundary element method. Frontiers of Mechanical Engineering in China.DOI
221. Yuliang Shi, Ping Zhu, Libing Shen, Zhongqin Lin (2007). Lightweight design of automotive front side rails with TWB concept. Thin-Walled Structures.DOI
222. Zhongqin Lin (2007). STATE SPACE MODEL OF VARIATIONS STREAM PROPAGATION IN MULTISTATION ASSEMBLY PROCESSES OF SHEET METAL. Chinese Journal of Mechanical Engineering.
223. Zhongqin Lin (2007). FINITE ELEMENT MODELING OF SPOT WELDS BASED ON VEHICLE IMPACT. Chinese Journal of Mechanical Engineering.
224. Zhongqin Lin (2007). APPROACH TO CONSTRAINTS IN MRA MODELING BASED ON VARIATIONAL PRINCIPLES. Chinese Journal of Mechanical Engineering.
225. Zhongqin Lin (2007). Prediction of the flow behavior and grain size during forming for nickel alloy heavy forging. Suxing gongcheng xuebao.
226. Hua Wang, Zhongqin Lin (2007). Defects tracking matrix for mass customization production based on house of quality. International Journal of Flexible Manufacturing Systems.DOI
227. Jun He, Yongjin Guo, Zhongqin Lin (2007). Theoretical and numerical analysis of the effect of constant velocity on thermosonic bond strength. Microelectronics Reliability.DOI
228. Yingzhe Li, Zhongqin Lin, Hao Wang, Yong Chen (2007). An automated modelling approach for dynamic performance evaluation of mechatronic multibody systems. Mathematical and Computer Modelling of Dynamical Systems.DOI
229. Jun He, Yongjin Guo, Zhongqin Lin (2007). Numerical Study on the Effects of Bond Parameters on Thermosonic Bond Strength. International Conference on Electronic Packaging Technology (ICEPT).DOI
230. 张旭强，陈关龙，张延松，林忠钦（2006）. 伺服焊枪点焊压痕深度在线提取与电极磨损对焊点质量的影响. 《上海交通大学学报》.
231. 李淑慧，赵亦希，刘林虎，林忠钦（2006）. 压边圈应力传递规律及其对冲压成形的影响. 《上海交通大学学报》.
232. 殷金祥，沈利冰，陈关龙，林忠钦（2006）. 小波多分辨率造型技术在逆向工程中的应用. 《上海交通大学学报》.
233. 杨兵，张卫刚，林忠钦，陈关龙（2006）. 计算机控制管件液压成形液压压力机的研制. 《锻压技术》.
234. 夏妍春，殷跃红，陈兆能，林忠钦（2006）. 摩擦接触约束下的非刚性装配动态卡阻楔紧分析. 《上海交通大学学报》.
235. 余海东，林忠钦，张克实（2006）. 薄板试样斜断口形成机制及损伤断裂过程分析. 《固体力学学报》.
236. 吴昇，朱平，林忠钦，周昱，邱国华（2006）. 基于有限元法的行人腿部安全保护研究. 《机械制造》.
237. 梁彩平，林忠钦，陈关龙，李永兵（2006）. 管板单边电阻点焊形核过程有限元模拟. 《焊接》.
238. 梁彩平，李永兵，林忠钦，陈关龙（2006）. 管板单边电阻点焊过程预压接触分析. 《焊接学报》.
239. 李永兵，林忠钦，来新民，陈关龙（2006）. 电阻点焊熔核形成过程磁流体动力学分析. 《焊接学报》.
240. 张宇，朱平，陈关龙，林忠钦（2006）. 基于有限元法的轿车发动机罩板轻量化设计. 《上海交通大学学报》.
241. 杨兵，张卫刚，林忠钦（2006）. 一种管件液压成形加载路径的设计方法. 《上海交通大学学报》.
242. Yuliang Shi, Zhongqin Lin, Ping Zhu, Shanling Han (2006). Impact modeling of the weld line of tailor-welded blank. Materials & Design (1980-2015).DOI
243. Hai Dong Yu, Zhongqin Lin, Ke‐Shi Zhang, Yong Jin Guo (2006). The Ductile Damage and Fracture Mechanisms Analysis with Random Dispersion Multivoids. Key engineering materials.DOI
244. Jun Ying Cao, Xinmin Lai, Sun Jin, Zhongqin Lin (2006). A systematic method of adaptive joint design considering different assembly sequence in sheet metal product. The International Journal of Advanced Manufacturing Technology.DOI
245. Xinhua Liang, Zhongqin Lin, Ping Zhu (2006). Acoustic analysis of damping structure with response surface method. Applied Acoustics.DOI
246. Shaoyun Chen, Zhongqin Lin, Yizhu Zhang, Yoongbing Li (2006). A parametric study of sheet metal joints for dimensional integrity. The International Journal of Advanced Manufacturing Technology.DOI
247. Wenfeng Zhu, Hao Wang, Xinmin Lai, Zhongqin Lin, Yan Chen (2006). A New Method for Fitting Car Doors Allowing for the Thermal Effects of Welding. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering.DOI
248. Yu Zhang, Ping Zhu, Zhongqin Lin, Guanlong Chen (2006). Study on Structural Lightweight of Key Auto-Body Parts in Energy Absorption Based on Crashworthiness Simulation. SAE technical papers on CD-ROM/SAE technical paper series.DOI
249. Peng Chen, Zhongqin Lin, Guanlong Chen, K. Muammer (2006). Parametric analysis of warm forming of aluminum blanks with FEA and DOE. Transactions of Nonferrous Metals Society of China.DOI
250. Jiangqi Zhou, Guanlong Chen, Xinmin Lai, Zhongqin Lin (2006). A genetic algorithm to process-oriented optimization of joint configuration based on a skeleton model. The International Journal of Advanced Manufacturing Technology.DOI
251. Guanlong Chen, Jiangqi Zhou, Wayne Cai, Xinmin Lai, Zhongqin Lin, Roland J. Menassa (2006). A framework for an automotive body assembly process design system. Computer-Aided Design.DOI
252. Zhongqin Lin (2006). Acoustic Analysis and Topology Optimization of Auto-body Using CAE Method. Machine Design and Research.
253. Tikun Shan, Weigang Zhang, Zhongqin Lin, Shuhui Li (2006). Prediction of the Volume Fraction of Retained Austenite in Sheet Metal Forming for Trip Steels.DOI
254. Yingzhe Li, Zhongqin Lin, Hao Wang, Yong Chen (2006). Automatic Generation of Component-level Dynamic Equations Using Extensible Element Linear Graph Method. 2022 IEEE 18th International Conference on Automation Science and Engineering (CASE).DOI
255. 杨兵，宋忠财，张卫刚，林忠钦（2005）. 管件液压成形的影响因素. 《上海交通大学学报》.
256. 朱文峰，来新民，林忠钦，王皓（2005）. 车身装配虚拟样机建模研究. 《计算机集成制造系统》.
257. 林忠钦，于忠奇，孙成智，陈关龙（2005）. 变压边力条件下铝合金板的成形窗口. 《中国有色金属学报》.
258. 韩善灵，朱平，林忠钦（2005）. 侧向气动力对汽车稳态响应的影响. 《上海交通大学学报》.
259. 刘林虎，李淑慧，林忠钦，陈关龙（2005）. 基于压边力设计的高强度钢板成形方法. 《上海交通大学学报》.
260. 胡彩旗，林忠钦，陈杰，金隼，陈关龙（2005）. 基于特征映射的车身检具设计方法. 《上海交通大学学报》.
261. 朱文峰，林忠钦，来新民，罗爱辉（2005）. 基于多场耦合的车门铰链凸焊过程有限元仿真. 《焊接学报》.
262. 孙成智，陈关龙，林忠钦，倪峰，鲍文华（2005）. 控制压边力改善铝合金板成形性能的研究. 《材料科学与工艺》.
263. Yongbing Li, Jun Xu, Guanlong Chen, Zhongqin Lin (2005). Real-time measuring system design and application of thermal expansion displacement during resistance spot welding process. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
264. Jinxing Yin, Guanlong Chen, Zhongqin Lin (2005). New multiresolution modeling techniques in CAD. Computer-Aided Design.DOI
265. Zhongqi Yu, Zhongqin Lin, Yixi Zhao (2005). Evaluation of fracture limit in automotive aluminium alloy sheet forming. Materials & Design (1980-2015).DOI
266. Xinhua Liang, Zhongqin Lin, Ping Zhu, Yan Zhang (2005). Numerical Study of the Noise in Compartment after Auto-Body Lightweighting. SAE technical papers on CD-ROM/SAE technical paper series.DOI
267. Ying Jinxiang, Guan-Long Chen, Zhongqin Lin (2005). New Modeling Techniques in Multi-Space CAD. International Conference on Image and Graphics.DOI
268. Hao Wang, Guanlong Chen, Zhongqin Lin, Wang Haihua (2005). Algorithm of integrating QFD and TRIZ for the innovative design process. International Journal of Computer Applications in Technology.DOI
269. 朱文峰，来新民，王皓，林忠钦，陈潼（2004）. 汽车企业协同产品商务. 《汽车工程》.
270. 孙成智，陈关龙，林忠钦（2004）. 冲压成形工艺对薄壁构件碰撞性能影响的仿真研究. 《汽车工程》.
271. 张宇，朱平，林忠钦，陈关龙（2004）. 基于耐撞安全性的轿车车身关键吸能件的结构轻量化研究. Infats Proceedings of the 3rd International Forum of Automotive Traffic Safety.
272. 朱平，林忠钦，陈关龙，葛龙（2004）. 铝合金材料在轿车车身轻量化中的应用研究. 《计算机仿真》.
273. 于忠奇，赵亦希，林忠钦（2004）. 汽车用铝合金板拉深性能评估参数. 《中国有色金属学报》.
274. 李忠学，彭启立，胡彩旗，陈杰，林忠钦（2004）. 基于光学非接触测量的车身覆盖件曲面品质综合评价. 《汽车技术》.
275. 孙成智，陈关龙，林忠钦，张卫刚（2004）. 基于数值模拟的变压边力优化设计. 《上海交通大学学报》.
276. 李淑慧，徐峰，林忠钦，张苇，鲍文华（2004）. 后门内板可制造性分析的计算精度研究. 《汽车技术》.
277. 李迪，林忠钦（2004）. 概念设计阶段汽车内部布置方法研究. 《汽车技术》.
278. 余海燕，林忠钦，李淑慧，陈关龙（2004）. TRIP钢板在单向拉伸变形下的相变行为研究. 《材料科学与工艺》.
279. 朱平，张宇，林忠钦，陈关龙（2004）. 基于耐撞安全性仿真的MPV轿车车身零件轻量化研究. 《中国科协第五届青年学术年会》.
280. 陈锡荣，林忠钦，李淑慧，陈关龙，蒋浩民（2004）. 基于数值模拟的拼焊板焊缝移动控制方法研究. 《汽车技术》.
281. 韩善灵，朱平，林忠钦（2004）. 主动噪声控制技术及其在车内噪声控制中的应用. 《机械》.
282. Zhongqin Lin, Yansong Zhang, Guanlong Chen, Yongbing Li (2004). Study on real-time measurement of nugget diameter for resistance spot welding using a neuro-fuzzy algorithm. Conference proceedings - IEEE Instrumentation/Measurement Technology Conference.DOI
283. Shan Ling Han, Zhongqin Lin, Xiao Yang Lu (2004). Process of Push Bending Elbows and Its Parameters CAD System. Key engineering materials.DOI
284. Hou–Yong Yu, Guan Long Chen, Zhongqin Lin, Wei Gang Zhang (2004). Transformation Behavior of Retained Austenite for a TRIP700 Steel during Sheet Forming - An Experimental Study. Key engineering materials.DOI
285. Zhong Qi Yu, Zhongqin Lin, Yi Zhao (2004). The Numerical Analysis of the Formability of Aluminium Alloy Sheet in Complex Shape Box Deep Drawing Forming. Key engineering materials.DOI
286. Yansong Zhang, Guanlong Chen, Zhongqin Lin (2004). Study on Weld Quality Control of Resistance Spot Welding Using a Neuro-Fuzzy Algorithm. Lecture notes in computer science.DOI
287. Zhongqin Lin (2004). Active noise control technology and application on automobile cabin noise. Modern Machinery.
288. Zhongqin Lin (2004). The application of fuzzy method in plane four rods machine design. Modern Machinery.
289. 田兆青，来新民，林忠钦 (2004). Diagnosis of Multiple Fixture Faults in Multiple-Station Manufacturing Processes Based on State Space Approach. Tsinghua Science and Technology.
290. 陈炜，杨继昌，林忠钦（2003）. 拼焊板在车身覆盖件制造中的应用. 《汽车工程》.
291. 杨海成，林忠钦（2003）. 应用信息技术促进制造业创新跨越. 《全球化、信息化、绿色化提升中国制造业——2003年中国机械工程学会年会特邀主题报告》.
292. 顾力强，林忠钦，赵亦希，陈关龙，王怀宝（2003）. 轿车保险杠低速碰撞试验研究. 《上海交通大学学报》.
293. 孙成智，陈关龙，林忠钦，李淑慧（2003）. 利用变压边力控制技术改善盒形件成形性能. 《上海交通大学学报》.
294. 陈关龙，李永兵，张延松，林忠钦，来新民（2003）. 轿车车身点焊装配偏差有限元分析. 《2003汽车焊接国际论坛》.
295. 奚立峰，周晓军，林忠钦，李杰（2003）. Web驱动的智能电子维护技术. 《计算机集成制造系统》.
296. 朱晓魏，林忠钦，金先龙，李治，赵勇（2003）. 面向大批量定制产品的快速设计系统的研究. 《计算机集成制造系统》.
297. Yuxuan Li, Zhongqin Lin, Aiqin Jiang, Guanlong Chen (2003). Use of high strength steel sheet for lightweight and crashworthy car body. Materials & Design (1980-2015).DOI
298. 徐峰，林忠钦，李淑慧，陈关龙（2002）. 反向模拟在汽车覆盖件产品设计阶段的应用. 《汽车工程》.
299. 胡彩旗，陈少云，陈杰，林忠钦，陈关龙（2002）. 车身焊装生产线状态诊断中的三坐标测量. 《机械》.
300. 王海亮，金先龙，林忠钦（2002）. 低地板城市客车车身结构有限元分析. 《汽车工程》.
301. 李玉璇，林忠钦，蒋爱琴，葛龙（2002）. 有限元模型的几何精度对于碰撞分析结果的影响. 《机械》.
302. 朱平，林忠钦，陈关龙（2002）. 虚拟产品开发的共性关键技术研究. 《2002年中国机械工程学会年会》.
303. 葛龙，金先龙，林忠钦（2002）. 小客车保险杠低速碰撞仿真研究. 《机械》.
304. 连军，姚福生，林忠钦，来新民（2002）. 数据挖掘技术在轿车白车身装配偏差溯源中的应用. 《汽车技术》.
305. Gang Liu, Zhongqin Lin, Youxia Bao (2002). Improving dimensional accuracy of a u-shaped part through an orthogonal design experiment. Finite Elements in Analysis and Design.DOI
306. Gang Liu, Zhongqin Lin, Youxia Bao (2002). Optimization Design of Drawbead in Drawing Tools of Autobody Cover Panel. Journal of Engineering Materials and Technology.DOI
307. Yuxuan Li, Fen Liu, Zhongqin Lin, Xianlong Jin (2002). The Improvement of a Minibus' Structure Based on Computer Simulation of Crashworthiness. SAE technical papers on CD-ROM/SAE technical paper series.DOI
308. Wei Chen, Ji-Chang Yang, Zhongqin Lin (2002). Application of integrated formability analysis in designing die-face of automobile panel drawing dies. Journal of Materials Processing Technology.DOI
309. Gang Liu, Zhongqin Lin, Youxia Bao, Jian Feng Cao (2002). Eliminating springback error in U-shaped part forming by variable blankholder force. Journal of Materials Engineering and Performance.DOI
310. Gang Liu, Zhongqin Lin, Weili Xu, Youxia Bao (2002). Variable blankholder force in U-shaped part forming for eliminating springback error. Journal of Materials Processing Technology.DOI
311. Yizhu Zhang, Jun Ni, Zhongqin Lin, Xinmin Lai (2002). Automatic Sequence Planning by Subassembly Detection for Automobile Body Assembly. Manufacturing.DOI
312. Zhongqin Lin (2002). APPLICATION ORTHOGONAL EXPERIMENT DESIGN IN INCREASING DIMENSIONAL ACCURACY OF U-SHAPED PARTS. Journal of Mechanical Engineering.DOI
313. Jun Lian, Zhongqin Lin, Fusheng Yao, Xinmin Lai (2002). Analysis of Nonlinear Variation Accumulation in Auto-Body Assembly Process. Manufacturing.DOI
314. Zhongqin Lin (2002). Study on Curve Fairing Based on Genetic Optimal Algorithm. Zhongguo jixie gongcheng.
315. 徐伟力，林忠钦，陆匠心，汪承璞（2001）. 动态仿真在车身覆盖件成形中的应用. 《材料科学与工艺》.
316. 王海亮，金先龙，林忠钦（2001）. 客车车身结构设计系统及建模技术研究. 《汽车技术》.
317. 连军，林忠钦，来新民，姚福生，陈关龙（2001）. 虚拟车身开发中的装配偏差仿真分析. 《2001年中国机械工程学会年会暨第九届全国特种加工学术年会》.
318. 胡敏，来新民，林忠钦，陈关龙（2001）. 多柔性件并联点焊装配误差的数学模型. 《上海交通大学学报》.
319. 陈炜，林忠钦，徐伟力，陈关龙（2001）. 覆盖件拉延模型面的特征组装配建模技术. 《上海交通大学学报》.
320. 林忠钦，胡敏，米新民，陈关龙（2001）. 轿车白车身点焊装配过程有限元分析. 《焊接学报》.
321. Min Hu, Zhongqin Lin, Xinmin Lai, Jun Ni (2001). Simulation and analysis of assembly processes considering compliant, non-ideal parts and tooling variations. International Journal of Machine Tools and Manufacture.DOI
322. Zhongqin Lin (2001). HIGH PRECISION EVALUATION OF THE AUTOBODY ASSEMBLY QUALITY BASED ON SMALL SAMPLE SIZE. Journal of Mechanical Engineering.DOI
323. 沈利冰，林忠钦，来新民，陈关龙，胡敏（2000）. 一种轿车车身制造尺寸精度分类方法. 《第一届国际机械工程学术会议论文集》.
324. 董洪智，林忠钦，陈关龙（2000）. 车身覆盖件冲压仿真结果对比及分析. 《汽车工程》.
325. 李淑慧，李明哲，林忠钦（2000）. 板条多点成形中曲率分布及回弹控制的研究. 《第一届国际机械工程学术会议》.
326. 朱亚群，徐伟力，杨玉英，林忠钦（2000）. 冲压仿真中Mindlin壳单元的关键技术问题. 《材料科学与工艺》.
327. 徐伟力，杨玉英，林忠钦（2000）. 静力隐式弹塑性有限元程序中关键技术问题的处理. 《材料科学与工艺》.
328. 胡敏，来新民，陈关龙，林忠钦（2000）. 轿车车身点焊装配误差分析模型的建立与研究. 《焊接技术》.
329. 刘罡，林忠钦，张卫刚（2000）. 薄板成形仿真动力显式算法的虚拟凸模速度分析. 《上海交通大学学报》.
330. 胡敏，来新民，林忠钦，陈关龙1干频，祝俊皓，周立波（2000）. 车体多柔性件装配的误差分析. 《上海交通大学学报》.
331. 林忠钦，连军，来新民，陈关龙（2000）. 基于小样本的车身装配尺寸质量动态高精度评价方法. 《第一届国际机械工程学术会议论文集》.
332. 陈关龙，来新民，朱平，林忠钦（2000）. 基于样条最佳逼近的自由曲面测量规划. 《第一届国际机械工程学术会议论文集》.
333. 金隼，来新民，陈关龙，林忠钦（2000）. 在线检测技术在车身焊装生产中的应用. 《汽车技术》.
334. 顾力强，林忠钦（1999）. 国内外汽车碰撞计算机模拟研究的现状及趋势. 《汽车工程》.
335. 陈炜，林忠钦（1999）. 汽车CAD/CAM技术应用研究. 《汽车技术》.
336. 薛量，林忠钦，姜正旭（1999）. 闭口帽型薄壁梁结构碰撞性能的数值模拟. 《江苏科技大学学报(自然科学版)》.
337. 胡轶敏，张卫刚，林忠钦，董洪智，黄鸿生，倪锋，汪承璞，郭瑞泉（1999）. 桑塔纳2000型轿车侧框冲压成形过程的仿真与试验研究. 《汽车工程》.
338. 陈炜，林忠钦（1999）. 机械CAD/CAM技术应用研究. 《机械工程师》.
339. 廖其红，林忠钦（1999）. 汽车侧面碰撞试验方法的分析. 《汽车技术》.
340. 来新民，黄田，陈关龙，林忠钦，曾子平（1999）. 自由曲面数字化的自适应规划. 《上海交通大学学报》.
341. 胡轶敏，张卫刚，林忠钦，刘罡（1999）. 轿车覆盖件成型过程动态仿真有限元建模技术研究. 《汽车技术》.
342. 顾力强，林忠钦，王为盛（1998）. FYC6100 大客车车身结构有限元分析. 《机械设计与研究》.
343. 顾力强，林忠钦，黄洪钟（1998）. SH6600 轻型乘用车车身结构的有限元分析. 《机械科学与技术》.
344. 林忠钦，张卫刚，包友霞，陈关龙（1998）. 轿车侧框冲压成形过程的仿真与试验分析. 《上海交通大学学报》.
345. 陈关龙，包友霞，林忠钦，刘罡（1998）. 行李箱盖板大变形区域的压延筋结构研究. 《上海交通大学学报》.
346. 胡轶敏，施相臣，林忠钦，石庆宗（1998）. 矢量化在车身CAD技术中的应用研究. 《智能制造》.
347. 张卫刚，胡轶敏，陈关龙，林忠钦，黄鸿生，石庆宗（1998）. 桑塔纳轿车车顶冲压成形动态仿真. 《汽车工程》.
348. 刘新亮，张建武，林忠钦（1997）. 主动汽车悬架的非线性控制. 《汽车工程》.
349. Zhongqin Lin, Jianwu Zhang (1996). Buckling and postbuckling of shear-deformable rectangular plates of composite construction. Thin-Walled Structures.DOI
350. Hui‐Shen Shen, Zhongqin Lin (1995). Thermal post-buckling analysis of imperfect laminated plates. Computers & Structures.DOI

书籍章节

1. Jiangqi Zhou, Chaochun Lian, Zuoping Yao, Wenfeng Zhu, Zhongqin Lin (2008). Application of Axiomatic Design Method to Manufacturing Issues Solving Process for Auto-body. Springer eBooks.DOI
2. Jiangqi Zhou, Guanlong Chen, Xinmin Lai, Zhongqin Lin (2004). Automated Generation of Dimension Chains for Auto-Body Dimensional Quality Evaluation. Springer eBooks.DOI
3. Wenfeng Zhu, Xinmin Lai, Zhongqin Lin (2004). Research of Virtual Prototyping for Auto-Body Sheet Metal Assembly. Springer eBooks.DOI