李少林｜北京航空航天大学｜学者主页

2026

考虑层间应力的复合材料疲劳寿命预测方法

曹端兴，杨洋，陈新文，祝赫，李少林，石多奇，齐红宇

《航空动力学报》

DOI

2026

Methodology for Predicting the Fatigue Life of TC4 Alloy with Corrosion Pit Based on Nonlinear Ultrasonic Evaluation

Xianjin Su, Jianhui Hu, Shaolin Li, Xiao-Guang Yang, D. Shi, H. Qi

Journal of materials engineering and performance (Print)

DOI

2026

An accurate and efficient XFEM/Peridynamics coupling framework for simulating corrosion-fatigue crack growth

Shaolin Li, Jiawei Lu, Haoqi Wu, H. Qi, D. Shi, Xiao-Guang Yang

Theoretical and applied fracture mechanics (Print)

DOI

2026

Plastic zone-informed deep learning methods: Fracture toughness prediction considering constraint effects

Chen-Hang Ma, Shaolin Li, Xin Huang, H. Qi, Xiaoguang Yang, D. Shi

Engineering Fracture Mechanics

DOI

2025

考虑热腐蚀的高温合金蠕变-疲劳损伤演化与寿命预测

徐梦悦，赵高乐，李少林，齐红宇，杨晓光，石多奇

《航空动力学报》

DOI

2025

TC4合金腐蚀缺陷的非线性表面波检测方法

苏贤金，胡剑辉，李少林，齐红宇，石多奇，杨晓光

《航空动力学报》

DOI

2025

复合材料高低周复合疲劳试验技术

温班宁，李少林，石多奇，向首亮，曹端兴，齐红宇

《航空动力学报》

DOI

2025

焊接接头裂纹扩展行为研究评述与展望

黄鑫，齐红宇，李少林，杨晓光，石多奇

《工程力学》

2025

2Cr12MoV不锈钢螺栓蠕变松弛行为研究

王寅超，苗世潮，林鹏，李少林，石多奇，齐红宇，陈庆森

《重型机械》

DOI

2025

短夹紧比液压螺栓回弹行为数值模拟研究

王寅超，苏浩朋，李少林，石多奇，齐红宇，陈庆森

《重型机械》

DOI

2025

基于代理模型的航空发动机部件复材化设计

祝赫，曹端兴，李少林，石多奇，杨晓光，齐红宇

《航空动力学报》

DOI

2025

基于机器学习算法模型的焊接接头疲劳寿命预测

徐梦悦，齐红宇，李少林，石多奇，杨晓光

《航空发动机》

DOI

2025

基于非线性超声检测信号的结构件腐蚀疲劳剩余寿命评估方法

苏贤金，胡剑辉，李少林，杨晓光，石多奇，齐红宇

《航空动力学报》

DOI

2025

短夹紧比液压拉伸螺栓装配回弹行为试验研究

王寅超，苏浩朋，李少林，石多奇，齐红宇，陈庆森

《重型机械》

DOI

2025

Oxygen-Assisted Cracking Behavior Model Based on Phase-Field Fracture Framework

Xin Huang, Qikun Xie, Shaolin Li, H. Qi, Xiaoguang Yang, D. Shi

Applied Mathematical Modelling

DOI

2025

Investigating the Mixed-Mode creep crack growth behavior of GH4169 superalloy: Experimental and numerical approaches

Xin Huang, H. Qi, Shaolin Li, Qikun Xie, Xiaoguang Yang, D. Shi

Theoretical and applied fracture mechanics (Print)

DOI

2025

A fatigue crack growth model considering in-plane constraint effects

Xin Huang, H. Qi, Shaolin Li, Xiaoguang Yang, D. Shi

Engineering Fracture Mechanics

DOI

2025

Influence of Specimen Thickness on Fatigue Crack Growth at High Temperature Under Mixed‐Mode Loading

Chun Hu, Xin Huang, Shaolin Li, H. Qi, Xiaoguang Yang, D. Shi

Fatigue & Fracture of Engineering Materials & Structures

DOI

2024

涡轮叶片随机分布腐蚀坑的应力分布规律研究

金绒绒，王庆华，李少林

《失效分析与预防》

2024

连续纤维增强聚合物基体复合材料多轴疲劳研究进展

曹端兴，杨洋，陈新文，祝赫，李少林，石多奇，齐红宇

《复合材料学报》

2024

发动机高温结构腐蚀损伤检测与评估方法研究进展

胡剑辉，齐红宇，李少林，石多奇，杨晓光

《航空动力学报》

2024

Internal Damage Evolution of C/SiC Composites in Air at 1650 °C Studied by in-situ Synchrotron X-ray Imaging

L. Xi, Shaolin Li, Kai-Yuan Xue, Xiao-Chuan Cui, Bo-Wen Wang, Ying Li, Dai-Ning Fang

Composites Part B: Engineering

DOI

2024

A phase-field fracture model for creep-fatigue behavior

Xin Huang, Qikun Xie, Shaolin Li, H. Qi, Xiaoguang Yang, D. Shi

Theoretical and applied fracture mechanics (Print)

DOI

2024

Fatigue behavior of welded joints of a Ni–Fe-based superalloy

Xin Huang, H. Qi, Shaolin Li, Xiaoguang Yang, D. Shi

Welding in the World

DOI

2024

An improved phase-field model for fatigue crack growth considering constraint effects

Xin Huang, Qikun Xie, H. Qi, Shaolin Li, Xiaoguang Yang, D. Shi

Theoretical and applied fracture mechanics (Print)

DOI

2024

Novel framework for predicting constraint effects on fracture toughness using an elastic–plastic phase field model and modified boundary layer formulations

Xin Huang, Qikun Xie, Shaolin Li, H. Qi, Xiaoguang Yang, D. Shi

Theoretical and applied fracture mechanics (Print)

DOI

2024

A phase-field fatigue fracture model considering the thickness effect

Chun Hu, H. Qi, Shaolin Li, Xiaoguang Yang, D. Shi

Engineering Fracture Mechanics

DOI

2024

Effects of random meso‐defects on fatigue behavior of welded joints: Damage evolution and lifetime prediction

Mengyue Xu, Xin Huang, Shaolin Li, H. Qi, Xiaoguang Yang, D. Shi

Fatigue & Fracture of Engineering Materials & Structures

DOI

2024

Bond-associated non-ordinary state-based peridynamics for simulating damage evolution of thermal barrier coatings in aero-engine turbine blades

Haoqi Wu, H. Qi, Shaolin Li, D. Shi, Xiaoguang Yang

Engineering Fracture Mechanics

DOI

2024

Creep-fatigue behavior of thermal barrier coated single-crystal nickel-based superalloys

Xin Huang, H. Qi, Shaolin Li, Jianan Song, Xiaoguang Yang, D. Shi

Ceramics International

DOI

2023

燃气涡轮发动机关键部件疲劳小裂纹研究进展

赵高乐，齐红宇，李少林，杨晓光，石多奇

《力学进展》

2023

A peridynamic model for corrosion-fatigue failure behaviour

Haoqi Wu, Shaolin Li, Gao-Le Zhao, H. Qi, Xiao-Guang Yang, D. Shi

Theoretical and applied fracture mechanics (Print)

DOI

2023

Phase-field fracture modeling for creep crack

Qikun Xie, H. Qi, Shaolin Li, Xiao-Guang Yang, D. Shi, Fu-Lin Li

Theoretical and applied fracture mechanics (Print)

DOI

2023

Damage evolution and life modeling of hot corrosion environment on creep‐fatigue of a directionally solidified nickel‐based superalloy

Jian-Hui Hu, Gao-Le Zhao, Shaolin Li, H. Qi, Xiao-Guang Yang, D. Shi

Fatigue & Fracture of Engineering Materials & Structures

DOI

2023

A phase-field model for mixed-mode elastoplastic fatigue crack

Qikun Xie, H. Qi, Shaolin Li, Xiao-Guang Yang, D. Shi

Engineering Fracture Mechanics

DOI

2023

Effect of heat treatment on the structure, fracture toughness and oxidation behavior of a silicon coating by atmospheric plasma spraying

Kirsten Bobzin, L. Zhao, H. Heinemann, E. Burbaum, Shaolin Li

Surface and Coatings Technology

DOI

2022

热端部件低温热腐蚀疲劳损伤机理、寿命模型和抗腐蚀设计方法

赵高乐，齐红宇，李少林，刘扬，杨晓光，石多奇，孙燕涛

《力学进展》

2022

Effect of thermal barrier coatings on the fatigue behavior of a single crystal nickel-based superalloy: Mechanism and lifetime modeling

Xin Huang, H. Qi, Shaolin Li, Jianan Song, Xiao-Guang Yang, D. Shi

Surface & Coatings Technology

DOI

2022

Modeling of the fatigue crack growth of nickel-based superalloy using a constraint-based approach considering thickness

He Liu, Xiao-Guang Yang, Shaolin Li, Cheng Yan, Jia Huang

Engineering Fracture Mechanics

DOI

2022

Influence of temperature on the R‐effect for the fatigue crack growth of nickel‐base superalloy GH4169

He Liu, Xiao-Guang Yang, Shaolin Li, Cheng Yan, Jia Huang

Fatigue & Fracture of Engineering Materials & Structures

DOI

2022

Experimental and numerical investigation of mixed-mode fatigue crack growth in nickel-based superalloy at high temperature

Qikun Xie, H. Qi, Shaolin Li, Xiao-Guang Yang, D. Shi

Engineering Fracture Mechanics

DOI

2021

Stress analysis and lifetime prediction for Ti–6Al–4V welding joint under fatigue loading

Yang Liu, Shangzhou Xia, Jianan Song, H. Qi, Shaolin Li, Xiao-Guang Yang, D. Shi

Materials Science and Technology

DOI

2021

Effects of tensile load hold time on the fatigue and corrosion-fatigue behavior of turbine blade materials

Gao-Le Zhao, H. Qi, Shaolin Li, Xiao-Guang Yang, D. Shi

DOI

2021

Low-cycle fatigue of MCrAlY-coated superalloys: A fracture mechanics-based analysis

Yang Liu, H. Qi, Jianan Song, Shaolin Li, D. Shi, Xiao-Guang Yang

Materials Science and Technology

DOI

2021

Dynamic parametric modeling-based model updating strategy of aeroengine casings

C. Fei, Hao-Tian Liu, Shaolin Li, Huan Li, L. An, Cheng-rong Lu

Chinese Journal of Aeronautics

DOI

2021

The framework of hot corrosion fatigue life estimation of a PM superalloy using notch fatigue methodology combined with pit evolution

Zhen-Lei Li, Shaolin Li, Guoqiang Xu, D. Shi, Changqi Liu, Xiao-Guang Yang

DOI

2021

A diffusion-coupled cohesive element model for cracking analysis of thermal barrier coatings

Jianan Song, H. Qi, Shaolin Li, Xiao-Guang Yang, D. Shi, Chengwei Fei

Engineering Fracture Mechanics

DOI

2020

TGO非均匀增长对热障涂层应力演化和破坏机理的影响

刘扬，全昌彪，杨晓光，石多奇，张生良，孙燕涛，宋佳楠，李少林

《航空动力学报》

DOI

2020

Modeling fatigue crack growth for a through thickness crack: An out-of-plane constraint-based approach considering thickness effect

He Liu, Xiao-Guang Yang, Shaolin Li, D. Shi, H. Qi

DOI

2020

Microstructural evolution and restoration of creep property for a damaged K403 alloy after rejuvenation heat treatments

Liang Wang, Xiao-Guang Yang, H. Qi, D. Shi, Shaolin Li

Rare Metals

DOI

2020

High-temperature hot-corrosion effects on the creep–fatigue behavior of a directionally solidified nickel-based superalloy: Mechanism and lifetime prediction

Shaolin Li, Xiao-Guang Yang, H. Qi

DOI

2020

A quantitative role of rafting on low cycle fatigue behaviour of a directionally solidified Ni-based superalloy through a cross-correlated image processing method

Yong-Sheng Fan, Xiao Yang, D. Shi, S. Han, Shaolin Li

DOI

2020

Whole-process design and experimental validation of landing gear lower drag stay with global/local linked driven optimization strategy

C. Fei, Hao-Tian Liu, Zheng-Zheng Zhu, L. An, Shaolin Li, Cheng Lu

DOI

2020

Effect of interface diffusion on low-cycle fatigue behaviors of MCrAlY coated single crystal superalloys

D. Shi, Jianan Song, H. Qi, Shaolin Li, Xiao-Guang Yang

DOI

2020

The effect of inclusion factors on fatigue life and fracture-mechanics-based life method for a P/M superalloy at elevated temperature

Yingli Shi, Didi Yang, Xiao-Guang Yang, Guo-Lei Miao, D. Shi, Shaolin Li, Xiao-An Hu, Fen-Cheng Liu, Wei-Qing Huang

DOI

2020

Residual fatigue life prediction based on a novel damage accumulation model considering loading history

Zhen-Lei Li, D. Shi, Shaolin Li, Xiaoguang Yang

Fatigue & Fracture of Engineering Materials & Structures

DOI

2020

A novel fatigue life model considering surface-damage induced performance degradation

Jianan Song, H. Qi, Shaolin Li, D. Shi, Xiao-Guang Yang

DOI

2020

A numerical approach to simulate 3D crack propagation in turbine blades

He Liu, Xiao-Guang Yang, Shaolin Li, D. Shi

DOI

2020

Experiment and modelling on the effect of microstructural morphology on fatigue life of a Ni-based superalloy

Yong-Sheng Fan, Xiao-Guang Yang, L. Tan, D. Shi, Shaolin Li, P. Wang

DOI

2020

A Study on Establishing a Microstructure-Related Hardness Model with Precipitate Segmentation Using Deep Learning Method

C. Wang, D. Shi, Shaolin Li

Materials

DOI

2020

Experimental investigation on creep‐fatigue behaviours of as‐received and service‐exposed turbine blades: Mechanism and life evaluation

Zhen-Lei Li, D. Shi, Shaolin Li, Xiao-Guang Yang, Nina Li

DOI

2019

Computational method for the analysis of erosion-induced stress and damage in thermal barrier coatings

Jianan Song, H. Qi, Shaolin Li, D. Shi, Xiao-Guang Yang

DOI

2019

The influence of temperature and orientation on fatigue crack growth behavior of a directional solidification nickel-based superalloy: Experimental investigation and modelling

Yingli Shi, Xiao-Guang Yang, Didi Yang, Guo-Lei Miao, H. Qi, D. Shi, Shaolin Li

International Journal of Fatigue

DOI

2019

Numerical study on the competitive cracking behavior in TC and interface for thermal barrier coatings under thermal cycle fatigue loading

Jianan Song, Shaolin Li, Xiao-Guang Yang, D. Shi, H. Qi

Surface & Coatings Technology

DOI

2019

A systematical weight function modified critical distance method to estimate the creep-fatigue life of geometrically different structures

Zhen-Lei Li, D. Shi, Shaolin Li, Xiao-Guang Yang, Guo-Lei Miao

International Journal of Fatigue

DOI

2019

Low-cycle fatigue behavior of a directionally solidified Ni-based superalloy subjected to gas hot corrosion pre-exposure

H. Qi, Ji-Shen Yang, Xiao-Guang Yang, Shaolin Li

Rare Metals

DOI

2019

Mechanical properties deterioration and its relationship with microstructural variation using small coupons sampled from serviced turbine blades

Yong-Sheng Fan, Wei-Qing Huang, Xiao-Guang Yang, D. Shi, Shaolin Li

Materials Science & Engineering: A

DOI

2019

Effect of bond-coat surface roughness on failure mechanism and lifetime of air plasma spraying thermal barrier coatings

Shaolin Li, H. Qi, Jianan Song, Xiao-Guang Yang, C. Che

Science China Technological Sciences

DOI

2019

Cracking behaviors of EB-PVD thermal barrier coating under temperature gradient

D. Shi, Jianan Song, Shaolin Li, H. Qi, Xiao-Guang Yang

Ceramics International

DOI

2019

A physically based model for correlating the microstructural degradation and residual creep lifetime of a polycrystalline Ni-based superalloy

Shaolin Li, Bingxue Wang, D. Shi, Xiao-Guang Yang, H. Qi

Journal of Alloys and Compounds

DOI

2019

Evaluation of service-induced microstructural damage for directionally solidified turbine blade of aircraft engine

Wei-Qing Huang, Xiao-Guang Yang, Shaolin Li

Rare Metals

DOI

2019

Effect of non-uniform growth of TGO layer on cracking behaviors in thermal barrier coatings: A numerical study

Jianan Song, H. Qi, D. Shi, Xiao-Guang Yang, Shaolin Li

Surface & Coatings Technology

DOI

2018

氧化层非均匀增长对热障涂层应力分布的影响

贾攀峰，齐红宇，李少林，杨晓光

《航空动力学报》

2018

Experimental investigation and modelling of microstructure degradation in a DS Ni-based superalloy using a quantitative cross-correlation analysis method

Wei-Qing Huang, Shaolin Li, Xiao-Guang Yang, D. Shi, H. Qi

Journal of Alloys and Compounds

DOI

2018

Numerical investigation on the cracking behaviors of thermal barrier coating system under different thermal cycle loading waveforms

Jianan Song, Shaolin Li, Xiao-Guang Yang, H. Qi, D. Shi

Surface & Coatings Technology

DOI

2018

Fatigue behavior of uncoated and MCrAlY-coated DS nickel-based superalloys pre-exposed in hot corrosion condition

H. Qi, Ji-Shen Yang, Xiao-Guang Yang, Shaolin Li, Li-Qiang Ma

Rare Metals

DOI

2018

Low-temperature hot corrosion effects on the low-cycle fatigue lifetime and cracking behaviors of a powder metallurgy Ni-based superalloy

Shaolin Li, Xiao-Guang Yang, H. Qi, Jianan Song, D. Shi

International Journal of Fatigue

DOI

2018

The effect of thermal loading waveform on the failure mechanism of atmospheric-plasma-sprayed thermal barrier coating system

Shaolin Li, Xiao-Guang Yang, H. Qi, C. Che

Science China Technological Sciences

DOI

2018

Oxidation-induced damage of an uncoated and coated nickel-based superalloy under simulated gas environment

Shaolin Li, H. Qi, Xiao-Guang Yang

Rare Metals

DOI

2018

Experimental study and numerical modeling of the damage evolution of thermal barrier coating systems under tension

Shaolin Li, Hong-Wei Yang, H. Qi, Jianan Song, Xiao-Guang Yang, D. Shi

Science China Technological Sciences

DOI

2017

Failure assessment of the first stage high-pressure turbine blades in an aero-engine turbine

D. Shi, C. Wang, Xiao-Guang Yang, Shaolin Li

DOI

2017

An improved viscoplastic constitutive model and its application to creep behavior of turbine blade

C. Wang, D. Shi, Xiao-Guang Yang, Shaolin Li, Cheng-Li Dong

DOI

2017

Low-cycle fatigue behavior of DZ125 superalloy under prior exposure conditions

H. Qi, Xiao-Lei Zheng, Li-Qiang Ma, Shaolin Li, Xiao-Guang Yang, D. Shi

Rare Metals

DOI

2016

Influence of the different salt deposits on the fatigue behavior of a directionally solidified nickel-based superalloy

Shaolin Li, Xiao-Guang Yang, Guoqiang Xu, H. Qi, D. Shi

DOI

2016

High-temperature oxidation behavior of DZ125 Ni-based superalloy under tensile stress

H. Qi, Xiao-bo Liang, Shaolin Li, Xiao-Guang Yang

Rare Metals

DOI

2016

Low cyclic fatigue behavior of electron-beam-welded Ti–6Al–4V titanium joint

H. Qi, Li-Qiang Ma, Shaolin Li, Xiao-Guang Yang

Rare Metals

DOI

2016

Influence of MCrAlY coating on low-cycle fatigue behavior of a directionally solidified nickel-based superalloy in hot corrosive environment

Shaolin Li, Xiao-Guang Yang, H. Qi, Guoqiang Xu, D. Shi

DOI

2016

Tensile properties and failure analysis of Ti–6Al–4V joints by electron beam welding

Xiao-Guang Yang, Shaolin Li, H. Qi

Rare Metals

DOI

2015

Effect of high-temperature hot corrosion on the low cycle fatigue behavior of a directionally solidified nickel-base superalloy

Xiao-Guang Yang, Shaolin Li, H. Qi

DOI

2015

Experimental investigation and life prediction of hot corrosion pre-exposure on low-cycle fatigue of a directionally solidified nickel-base superalloy

Shaolin Li, Xiao-Guang Yang, H. Qi, L.-Q. Ma, Ji-Shen Yang, D. Shi

DOI

2015

Effect of MCrAlY coating on the low-cycle fatigue behavior of a directionally solidified nickel-base superalloy at different temperatures

Xiao-Guang Yang, Shaolin Li, H. Qi

DOI

2014

等离子热障涂层构件高温热疲劳寿命预测研究

齐红宇，马立强，李少林，杨晓光，王亚梅，魏洪亮

《材料工程》

2014

Ti–6Al–4V welded joints via electron beam welding: Microstructure, fatigue properties, and fracture behavior

Xiao-Guang Yang, Shaolin Li, H. Qi

DOI

2014

Fatigue crack growth of titanium alloy joints by electron beam welding

H. Qi, Hao-Bo Shi, Shaolin Li, Xiao-Guang Yang

Rare Metals

DOI

2014

Effects of Mo and Ta in Ni3Al based single crystal alloys on their stress–rupture properties at intermediate temperatures

Wei Li, Haochen Li, L. Liu, Yanling Pei, Yue Ma, Shaolin Li, Shengkai Gong

Materials Research Innovations

DOI

2013

锻造TC4钛合金电子束焊接接头的疲劳破坏机制

齐红宇，李少林，杨晓光，王相平，苏守丽

《航空动力学报》

2012

Mechanical Properties of Forged Ti-6Al-4V Structure by Electron Beam Welding

H. Qi, Jian Xie, Shaolin Li, Xiao-Guang Yang

DOI

2011

Tensile Strength of Forged Ti-6Al-4V Welded Joints by Electronic Beam Welding

H. Qi, Jian Xie, D. Pan, Shaolin Li, Xiao-Guang Yang

DOI

2008

Effect of Ruthenium on Microstructure and Stress Rupture Properties of a Single Crystal Nickel-Base Superalloy

Yuxiao Han, Wenbin Ma, Z. Dong, Shaolin Li, Shengkai Gong

DOI

精选作品

期刊论文

考虑层间应力的复合材料疲劳寿命预测方法

Methodology for Predicting the Fatigue Life of TC4 Alloy with Corrosion Pit Based on Nonlinear Ultrasonic Evaluation

An accurate and efficient XFEM/Peridynamics coupling framework for simulating corrosion-fatigue crack growth

Plastic zone-informed deep learning methods: Fracture toughness prediction considering constraint effects

考虑热腐蚀的高温合金蠕变-疲劳损伤演化与寿命预测

TC4合金腐蚀缺陷的非线性表面波检测方法

复合材料高低周复合疲劳试验技术

焊接接头裂纹扩展行为研究评述与展望

2Cr12MoV不锈钢螺栓蠕变松弛行为研究

短夹紧比液压螺栓回弹行为数值模拟研究

基于代理模型的航空发动机部件复材化设计

基于机器学习算法模型的焊接接头疲劳寿命预测

基于非线性超声检测信号的结构件腐蚀疲劳剩余寿命评估方法

短夹紧比液压拉伸螺栓装配回弹行为试验研究

Oxygen-Assisted Cracking Behavior Model Based on Phase-Field Fracture Framework

Investigating the Mixed-Mode creep crack growth behavior of GH4169 superalloy: Experimental and numerical approaches

A fatigue crack growth model considering in-plane constraint effects

Influence of Specimen Thickness on Fatigue Crack Growth at High Temperature Under Mixed‐Mode Loading

涡轮叶片随机分布腐蚀坑的应力分布规律研究

连续纤维增强聚合物基体复合材料多轴疲劳研究进展

发动机高温结构腐蚀损伤检测与评估方法研究进展

Internal Damage Evolution of C/SiC Composites in Air at 1650 °C Studied by in-situ Synchrotron X-ray Imaging

A phase-field fracture model for creep-fatigue behavior

Fatigue behavior of welded joints of a Ni–Fe-based superalloy

An improved phase-field model for fatigue crack growth considering constraint effects

Novel framework for predicting constraint effects on fracture toughness using an elastic–plastic phase field model and modified boundary layer formulations

A phase-field fatigue fracture model considering the thickness effect

Effects of random meso‐defects on fatigue behavior of welded joints: Damage evolution and lifetime prediction

Bond-associated non-ordinary state-based peridynamics for simulating damage evolution of thermal barrier coatings in aero-engine turbine blades

Creep-fatigue behavior of thermal barrier coated single-crystal nickel-based superalloys

燃气涡轮发动机关键部件疲劳小裂纹研究进展

A peridynamic model for corrosion-fatigue failure behaviour

Phase-field fracture modeling for creep crack

Damage evolution and life modeling of hot corrosion environment on creep‐fatigue of a directionally solidified nickel‐based superalloy

A phase-field model for mixed-mode elastoplastic fatigue crack

Effect of heat treatment on the structure, fracture toughness and oxidation behavior of a silicon coating by atmospheric plasma spraying

热端部件低温热腐蚀疲劳损伤机理、寿命模型和抗腐蚀设计方法

Effect of thermal barrier coatings on the fatigue behavior of a single crystal nickel-based superalloy: Mechanism and lifetime modeling

Modeling of the fatigue crack growth of nickel-based superalloy using a constraint-based approach considering thickness

Influence of temperature on the R‐effect for the fatigue crack growth of nickel‐base superalloy GH4169

Experimental and numerical investigation of mixed-mode fatigue crack growth in nickel-based superalloy at high temperature

Stress analysis and lifetime prediction for Ti–6Al–4V welding joint under fatigue loading

Effects of tensile load hold time on the fatigue and corrosion-fatigue behavior of turbine blade materials

Low-cycle fatigue of MCrAlY-coated superalloys: A fracture mechanics-based analysis

Dynamic parametric modeling-based model updating strategy of aeroengine casings

The framework of hot corrosion fatigue life estimation of a PM superalloy using notch fatigue methodology combined with pit evolution

A diffusion-coupled cohesive element model for cracking analysis of thermal barrier coatings

TGO非均匀增长对热障涂层应力演化和破坏机理的影响

Modeling fatigue crack growth for a through thickness crack: An out-of-plane constraint-based approach considering thickness effect

Microstructural evolution and restoration of creep property for a damaged K403 alloy after rejuvenation heat treatments

High-temperature hot-corrosion effects on the creep–fatigue behavior of a directionally solidified nickel-based superalloy: Mechanism and lifetime prediction

A quantitative role of rafting on low cycle fatigue behaviour of a directionally solidified Ni-based superalloy through a cross-correlated image processing method

Whole-process design and experimental validation of landing gear lower drag stay with global/local linked driven optimization strategy

Effect of interface diffusion on low-cycle fatigue behaviors of MCrAlY coated single crystal superalloys

The effect of inclusion factors on fatigue life and fracture-mechanics-based life method for a P/M superalloy at elevated temperature

Residual fatigue life prediction based on a novel damage accumulation model considering loading history

A novel fatigue life model considering surface-damage induced performance degradation

A numerical approach to simulate 3D crack propagation in turbine blades

Experiment and modelling on the effect of microstructural morphology on fatigue life of a Ni-based superalloy

A Study on Establishing a Microstructure-Related Hardness Model with Precipitate Segmentation Using Deep Learning Method

Experimental investigation on creep‐fatigue behaviours of as‐received and service‐exposed turbine blades: Mechanism and life evaluation

Computational method for the analysis of erosion-induced stress and damage in thermal barrier coatings

The influence of temperature and orientation on fatigue crack growth behavior of a directional solidification nickel-based superalloy: Experimental investigation and modelling

Numerical study on the competitive cracking behavior in TC and interface for thermal barrier coatings under thermal cycle fatigue loading

A systematical weight function modified critical distance method to estimate the creep-fatigue life of geometrically different structures

Low-cycle fatigue behavior of a directionally solidified Ni-based superalloy subjected to gas hot corrosion pre-exposure

Mechanical properties deterioration and its relationship with microstructural variation using small coupons sampled from serviced turbine blades

Effect of bond-coat surface roughness on failure mechanism and lifetime of air plasma spraying thermal barrier coatings

Cracking behaviors of EB-PVD thermal barrier coating under temperature gradient

A physically based model for correlating the microstructural degradation and residual creep lifetime of a polycrystalline Ni-based superalloy

Evaluation of service-induced microstructural damage for directionally solidified turbine blade of aircraft engine

Effect of non-uniform growth of TGO layer on cracking behaviors in thermal barrier coatings: A numerical study

氧化层非均匀增长对热障涂层应力分布的影响

Experimental investigation and modelling of microstructure degradation in a DS Ni-based superalloy using a quantitative cross-correlation analysis method

Numerical investigation on the cracking behaviors of thermal barrier coating system under different thermal cycle loading waveforms

Fatigue behavior of uncoated and MCrAlY-coated DS nickel-based superalloys pre-exposed in hot corrosion condition

Low-temperature hot corrosion effects on the low-cycle fatigue lifetime and cracking behaviors of a powder metallurgy Ni-based superalloy

The effect of thermal loading waveform on the failure mechanism of atmospheric-plasma-sprayed thermal barrier coating system