张深根

2026

金属异质结构材料：分类、强韧化机制与发展趋势

《材料导报》

2026

CeO2对MnOx催化剂低温脱硝性能的影响及其机理研究

《无机材料学报》

2026

多源含铜固体废物协同熔炼的渣相调控机制研究

《矿冶工程》

2026

连续退火温度对2×××系航空铝合金薄板显微组织和性能的影响

《金属热处理》

DOI

2026

Impact of copper speciation on the polymerization and structural evolution of non-crystalline networks in GBFS-cement composites

Journal of Non-Crystalline Solids

DOI

2026

Structure and composition of natural surface film on recycled AA7075-T62 alloy: elucidating the corrosion evolution mechanism

Applied Surface Science

DOI

2026

Ultradeep Enrichment of Platinum Group Metals Using Fe 2 O 3 as Oxygen Carrier for Base Metals Oxidation and Removal

Advanced Sustainable Systems

DOI

2025

铁捕集铂族金属合金的电化学回收工艺研究

《稀有金属》

DOI

2025

2026铝合金型材显微组织对其力学性能及耐蚀性的影响

《轻合金加工技术》

DOI

2025

Sm–Mn/Ti蜂窝式低温脱硝催化剂性能研究

《工程科学学报》

DOI

2025

Mn基低温脱硝催化剂性能优化研究进展

《工程科学学报》

DOI

2025

Environmentally safe solid waste–derived dark ceramics with Mn3+/Mn4+ double-exchange for enhanced NIR reflectivity

Journal of environmental chemical engineering

DOI

2025

Diffusion of H2O in Aluminum Hydroxide Covered on Aluminum Nitride During Hydrolysis of Secondary Aluminum Dross

JOM

DOI

2025

Severe supply risk of iridium on hydrogen energy and its sustainable development strategy

Separation and Purification Technology

DOI

2025

Comparative investigation of the rare earth elements-doped MnOx catalysts by exploring the low-temperature SCR performance and SO2 resistance

Journal of Materials Science

DOI

2025

Preparation and color rendering mechanism of silica-manganese slag-based sintered blue bricks

Ceramics International

DOI

2025

Computational screening‐aided design of transition metal‐doped CeO 2 as NH 3 ‐SCR catalysts

Rare Metals

DOI

2025

Illuminating the cathodic reaction kinetics of Al-Zn-Mg-Cu alloy on corroded surfaces in chloride environment

Surfaces and Interfaces

DOI

2025

Separation of heavy metals from municipal solid waste incineration fly ash: A review

Ecotoxicology and Environmental Safety

DOI

2025

A review of the upcycling of aluminum scrap and dross using molten salt electrolysis

Resources Conservation and Recycling

DOI

2025

Excellent low-temperature NH3-SCR activity and resistance to H2O and SO2 over Co1.5Mn1.5O4 with highly dispersed CeO2 and doped cerium

Journal of Rare Earths

DOI

2025

Migration of nitrogen in calcium aluminate made from aluminum dross

Journal of Alloys and Compounds

DOI

2025

Reduction of iron from red mud with aluminum dross to capture heavy metals from municipal solid waste incineration fly ash into alloy

Journal of environmental chemical engineering

DOI

2025

Strengthening mechanism of crack restriction in Fe/Al2O3 cermet made from aluminum dross and red mud by reduction and hot-pressing sintering

Ceramics International

DOI

2024

二次铝灰资源化研究进展

《稀有金属》

2024

CuOx/SiO2催化剂化学态调控及低温脱硝性能研究

《稀有金属》

DOI

2024

失效锂离子电池石墨负极回收利用研究进展

《工程科学学报》

2024

铬镍冶金渣处理与利用技术

2024

废杂铜直接制杆产业化成套技术

《铜业工程》

2024

脱硝催化剂循环利用技术

《冶金工业出版社》

2024

Co–upcycling hazardous solid wastes of MSWI fly ash and secondary aluminum ash into iron and glass ceramic foams

Resources Conservation and Recycling

DOI

2024

Promotion effect of Zr incorporation on catalytic performance over MnV2O6 catalyst for NOx removal in a wide temperature range

Journal of Materials Science

DOI

2024

Formation of aluminum nitride in dross by contact-diffusion reaction during aluminum recycling

Journal of Alloys and Compounds

DOI

2024

A comprehensive review on the distribution behaviors of precious metals through pyrometallurgical processes and implications for recycling

Minerals Engineering

DOI

2024

Recycling of secondary aluminum dross to make alumina by hydrometallurgy: A review

Journal of Materials Research and Technology

DOI

2024

Sustainable recycling of aluminum scraps to recycled aerospace-grade 7075 aluminum alloy sheets

Sustainable materials and technologies

DOI

2024

Supply and demand of platinum group metals and strategies for sustainable management

Renewable and Sustainable Energy Reviews

DOI

2024

Mechanism and optimization for the effect of solid solution treatment on microstructure and properties of recycled 7050-T7451 plate

Journal of Materials Research and Technology

DOI

2023

废旧风力发电机叶片资源化利用研究进展

《工程科学学报》

2023

促进铜铝材保级利用——《废铜铝加工利用行业规范条件》解读之三

《资源再生》

2023

铂族金属萃取分离技术研究进展

《有色金属(冶炼部分)》

2023

废均相催化剂氧化-络合浸出铑工艺及其动力学

《工程科学学报》

2023

钢铁工业烟气脱硝技术应用进展及前景

《工程科学学报》

2023

分子动力学模拟和实验研究铝屑脱油、水技术及机理（英文）

Transactions of Nonferrous Metals Society of China

2023

Application of geopolymers for treatment of industrial solid waste containing heavy metals: State-of-the-art review

Journal of Cleaner Production

DOI

2023

Selective leaching of V, W and recycling of TiO2 carrier from waste V2O5-WO3/TiO2 catalysts by mixed alkali liquor

Sustainable Chemistry and Pharmacy

DOI

2023

Hydrolysis induced simultaneously foaming and coagulation casting of secondary aluminum dross aqueous suspension

Journal of The American Ceramic Society

DOI

2023

Effect of samarium on the N_2 selectivity of Sm_xMn_0.3−xTi catalysts during selective catalytic reduction of NO_x with NH_3

International Journal of Minerals, Metallurgy, and Materials

DOI

2023

High strength porous ceramics and its potential in adsorption and building materials: A short process to co-disposal secondary aluminum dross and quicklime

Construction and Building Materials

DOI

2023

Evolutionary mechanism of the precipitation behavior and organization of iron-containing intermetallic phase during solidification of recycled high-Fe Al-Zn-Mg-Cu melts

Journal of Alloys and Compounds

DOI

2023

Enrichment of Ni–Mo–V via pyrometallurgical reduction from spent hydrogenation catalysts and the multi-reaction mechanism

Rare Metals

DOI

2023

Microstructure evolution and properties comparation of industrial grade-maintained 7050-T7451 plate recycled from machining chips

Journal of Materials Research and Technology

DOI

2023

Slag design and optimization for iron capturing platinum group metals from alumina-based spent catalysts

Rare Metals

DOI

2023

Sustainable recycling of aerospace-grade ultra-clean 7050 aluminum alloy melts through argon refining without secondary aluminum dross generation

Journal of Materials Research and Technology

DOI

2022

铁捕集铂族金属富集物的锌碎化-酸解原理及工艺研究

《稀有金属》

2022

SiO2微球负载Mn-Ce基催化剂的SCR脱硝性能研究

《稀有金属》

2022

废钒钛系脱硝催化剂碱法回收研究进展

《化工进展》

DOI

2022

废汽车催化剂铁捕集熔炼渣一步法制备微晶玻璃研究

《工程科学学报》

2022

垃圾焚烧飞灰熔融无害化及资源化研究现状

《工程科学学报》

2022

稀土元素在脱硝催化剂中的应用

《化学进展》

2022

Preparation and hydration of industrial solid waste—cement blends: A review

International Journal of Minerals, Metallurgy, and Materials

DOI

2022

Co-vitrification of municipal solid waste incinerator fly ash and bottom slag: Glass detoxifying characteristics and porous reformation.

Ecotoxicology and Environmental Safety

DOI

2022

Phase evolution and properties of glass ceramic foams prepared by bottom ash, fly ash and pickling sludge

International Journal of Minerals, Metallurgy, and Materials

DOI

2022

Hierarchically porous glass–ceramics by alkaline activation and crystallization from municipal solid waste incineration ashes

Journal of Cleaner Production

DOI

2022

Template-free synthesis of core—shell Fe_3O_4@MoS_2@mesoporous TiO_2 magnetic photocatalyst for wastewater treatment

International Journal of Minerals, Metallurgy, and Materials

DOI

2022

Synthesis of porous glass ceramics with hierarchical and interconnected pores from secondary aluminum dross and waste glass

Ceramics International

DOI

2022

Tar induced deactivation and regeneration of a commercial V2O5-MoO3/TiO2 catalyst during selective catalytic reduction of NO with NH3

Fuel

DOI

2022

A novel approach for preparing glass ceramic foams from MSWI fly ash: Foaming characteristics and hierarchical pore formation mechanism

Journal of Materials Research and Technology

DOI

2022

Homogeneous reduction for heavy metals from pickling sludge with aluminum nitride from secondary aluminum dross in aluminosilicate melt ‘solution’ environment

Journal of Cleaner Production

DOI

2022

Metal-free N-GQDs/P-g-C3N4 photocatalyst with broad-spectrum response: Enhanced exciton dissociation and charge migration for promoting H2 evolution and tetracycline degradation

Separation and Purification Technology

DOI

2022

Microstructure evolution and properties of 7075 aluminum alloy recycled from scrap aircraft aluminum alloys

Journal of Materials Research and Technology

DOI

2022

Phase transition during nucleation process in calcium aluminate glass-ceramics manufactured from secondary aluminum dross

Journal of Alloys and Compounds

DOI

2022

Mechanical Properties and Hydration Characteristics of Cement Composites with High-Volume Blast Furnace Slag by Wet Milling Activation

Social Science Research Network

DOI

2022

Porous ceramics with near‐zero‐shrinkage and low thermal conductivity from hazardous secondary aluminum dross

Journal of The American Ceramic Society

DOI

2022

Recovery of Fe, Cr and Ni in pickling sludge with aluminum nitride in secondary aluminum dross

Minerals Engineering

DOI

2022

Theoretical and experimental on the thermodynamic, kinetic and phase evolution characteristics of secondary aluminum ash

Journal of Materials Research and Technology

DOI

2022

Recycling of Coal Fly Ash in Building Materials: A Review

Minerals

DOI

2022

Recovery of Iron and Titanium in Red Mud with Secondary Aluminum Dross Followed by Manufacturing Glass Ceramics

JOM

DOI

2021

再生铝合金中含Fe杂质的控制技术现状

《化工进展》

DOI

2021

废加氢催化剂的回收现状与研究进展

《化工进展》

DOI

2021

Research progress on g–C3N4–based photocatalysts for organic pollutants degradation in wastewater: From exciton and carrier perspectives

Ceramics International

DOI

2021

Selective laser melting of IN738 superalloy with a low Mn+Si content: Effect of energy input on characteristics of molten pool, metallurgical defects, microstructures and mechanical properties

DOI

2021

Slag design and iron capture mechanism for recovering low-grade Pt, Pd, and Rh from leaching residue of spent auto-exhaust catalysts.

Science of the Total Environment

DOI

2021

Directly growing nanowire-assembled nanofibrous ceramic foams with multi-lamellar structure via freeze-casting process

DOI

2021

Iron oxide and jadeite nucleation in high alumina glass-ceramics prepared from secondary aluminum dross

DOI

2021

The Advancement of 7XXX Series Aluminum Alloys for Aircraft Structures: A Review

Metals

DOI

2021

Mullite ceramic foams with tunable pores from dual-phase sol nanoparticle-stabilized foams

Journal of the European Ceramic Society

DOI

2021

Highly porous ceramics production using slags from smelting of spent automotive catalysts

DOI

2021

Migration, transformation and solidification/stabilization mechanisms of heavy metals in glass-ceramics made from MSWI fly ash and pickling sludge

DOI

2021

Microstructure evolution of recycled 7075 aluminum alloy and its mechanical and corrosion properties

DOI

2021

Three-Dimensional Reticulated, Spongelike, Resilient Aerogels Assembled by SiC/Si3N4 Nanowires.

Nano letters (Print)

DOI

2021

Reduction for heavy metals in pickling sludge with aluminum nitride in secondary aluminum dross by pyrometallurgy, followed by glass ceramics manufacture.

Journal of Hazardous Materials

DOI

2021

A review of glass ceramic foams prepared from solid wastes: Processing, heavy-metal solidification and volatilization, applications.

Science of the Total Environment

DOI

2021

Promotion effect of niobium on ceria catalyst for selective catalytic reduction of NO with NH3

Journal of Rare Earths

DOI

2021

Synergistic effect of cobalt and niobium in Co3-Nb-Ox on performance of selective catalytic reduction of NO with NH3

Rare Metals

DOI

2021

Boosting exciton dissociation and charge transfer in P-doped 2D porous g-C3N4 for enhanced H2 production and molecular oxygen activation

Ceramics International

DOI

2021

Separation and purification of platinum group metals from aqueous solution: Recent developments and industrial applications

DOI

2021

Preparation of glass–ceramics from high-chlorine MSWI fly ash by one-step process

Rare Metals

DOI

2020

废催化剂中铂族金属回收现状与研究进展

《工程科学学报》

DOI

2020

SiC–Si3N4 composite with multi-laminate nanowires originated from oriented porous structure by freeze-casting

DOI

2020

Harmless disposal and resource utilization for secondary aluminum dross: A review.

Science of the Total Environment

DOI

2020

Highly efficient recovery of platinum, palladium, and rhodium from spent automotive catalysts via iron melting collection

DOI

2020

Study on glass-ceramics made from MSWI fly ash, pickling sludge and waste glass by one-step process

Journal of Cleaner Production

DOI

2020

Preparation and characterization of glass ceramic foams based on municipal solid waste incineration ashes using secondary aluminum ash as foaming agent

Construction and Building Materials

DOI

2020

Process and mechanism of electrolytic enrichment of PGMs from Fe-PGMs alloy

DOI

2020

Effect of oxygen vacancies on ceria catalyst for selective catalytic reduction of NO with NH3

DOI

2020

Degradation technologies and mechanisms of dioxins in municipal solid waste incineration fly ash: A review

DOI

2019

报废光伏板回收利用的研究现状

《稀有金属》

DOI

2019

Integrated utilization of municipal solid waste incineration fly ash and bottom ash for preparation of foam glass–ceramics

Rare Metals

DOI

2019

An alkaline fusion mechanism for aluminate rare earth phosphor: cation–oxoanion synergies theory

Rare Metals

DOI

2019

An Efficient Leaching of Palladium from Spent Catalysts through Oxidation with Fe(III)

Materials

DOI

2019

Production of glass–ceramics using Municipal solid waste incineration fly ash

Rare Metals

DOI

2019

Recovery of precious metals from electronic waste and spent catalysts: A review

Resources, Conservation and Recycling

DOI

2019

Selective catalytic reduction of NOx with NH3 over Mn–Zr–Ti mixed oxide catalysts

Journal of Materials Science

DOI

2019

Controlling the Composition and Magnetic Properties of Nano-SrFe12O19 Powder Synthesized from Oily Cold Mill Sludge by the Citrate Precursor Method

Materials

DOI

2019

Recovery of Platinum from Spent Petroleum Catalysts: Optimization Using Response Surface Methodology

Metals

DOI

2019

Emerging pollutants—Part II: Treatment

Water environment research

DOI

2019

Comparative study on transition element doped Mn–Zr–Ti-oxides catalysts for the low-temperature selective catalytic reduction of NO with NH3

Reaction Kinetics, Mechanisms and Catalysis

DOI

2019

Suppression of N2O formation by H2O and SO2 in the selective catalytic reduction of NO with NH3 over a Mn/Ti–Si catalyst

Catalysis science & technology

DOI

2019

Synthesis and properties of SrFe12O19 obtained by solid waste recycling of oily cold rolling mill sludge

International Journal of Minerals, Metallurgy, and Materials

DOI

2018

典型废旧稀土材料循环利用技术

《冶金工业出版社》

2018

Facile ball-milled synthesis of SnS2-carbon nanocomposites with superior lithium storage

Progress in Natural Science: Materials International

DOI

2018

Crystallization mechanism of glass-ceramics prepared from stainless steel slag

Rare Metals

DOI

2018

High N2 selectivity in selective catalytic reduction of NO with NH3 over Mn/Ti–Zr catalysts

RSC Advances

DOI

2018

Preparation and formation mechanism of monodisperse micaceous iron oxide from iron chromium grinding waste

DOI

2017

典型废旧金属循环利用技术

《冶金工业出版社》

2017

废铝易拉罐和报废飞机铝合金保级循环利用技术

《资源再生》

2017

Effect of hot-dip galvanizing processes on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel

International Journal of Minerals, Metallurgy, and Materials

DOI

2017

Supply and demand of some critical metals and present status of their recycling in WEEE.

Waste Management

DOI

2017

フライジオポリマ灰ベース中のPbの固定化機構【Powered by NICT】

2017

透輝石結晶周辺の高速拡散層に及ぼすNa_2Oの影響【Powered by NICT】

2017

A review of Mn-containing oxide catalysts for low temperature selective catalytic reduction of NOx with NH3: reaction mechanism and catalyst deactivation

DOI

2017

The influence of Na2O on the fast diffusion layer around diopside crystals

DOI

2017

Integrated process for recycling copper anode slime from electronic waste smelting

DOI

2017

Immobilization mechanism of Pb in fly ash-based geopolymer

DOI

2017

Height-related magnetoelectric performance of PZT/Ni layered composites

Rare Metals

DOI

2017

Using coal fly ash-based geopolymer to immobilize Cd from lead fuming furnace slag

Rare Metals

DOI

2016

重金属固废处理及资源化技术

《冶金工业出版社》

2016

加热速率对不同状态低合金高强钢Q&P处理后组织和性能的影响

《机械工程材料》

2016

Treatment method of hazardous pickling sludge by reusing as glass–ceramics nucleation agent

Rare Metals

DOI

2016

Enhanced magnetoelectric efficiency of the Tb1 − xDyxFe2 − y/Pb(Zr,Ti)O3 cylinder multi-electrode composites

DOI

2016

Synthesis and Characterization of Micaceous Iron Oxide Pigment from Oily Cold Rolling Mill Sludge

DOI

2016

SnSb/TiO2/C nanocomposite fabricated by high energy ball milling for high-performance lithium-ion batteries

DOI

2016

Glass-ceramics one-step crystallization accomplished by building Ca2+ and Mg2+ fast diffusion layer around diopside crystal

DOI

2016

One-step crystallization kinetic parameters of the glass-ceramics prepared from stainless steel slag and pickling sludge

DOI

2016

Mechanism of CeMgAl11O19:Tb3+ structure decomposition during alkaline fusion process

2016

Polymer content and particle size effects on polymer-bonded Terfenol-D/PZT magnetoelectric composites

DOI

2016

Effects of overaging temperature on the microstructure and properties of 600 MPa cold-rolled dual-phase steel

International Journal of Minerals, Metallurgy, and Materials

DOI

2016

600MPa冷間圧延二相鋼のミクロ組織と性質に及ぼす過時効温度の影響【Powered by NICT】

2016

Dilatometric study on the recrystallization and austenization behavior of cold-rolled steel with different heating rates

DOI

2016

Effects of Heating Rate on Microstructure and Property of Low-Alloy High-Strength Steel in Different States after Q&P Treatment

2016

Fast-heating for intercritical annealing of cold-rolled quenching and partitioning steel

DOI

2015

晶化温度对不锈钢渣微晶玻璃析晶及性能影响

《硅酸盐通报》

2015

Mechanism and kinetics of the BaMgAltoO17：Eu2＋ alkaline fusion reaction

DOI

2015

废旧线路板有价金属资源化技术

《世界有色金属》

2015

不锈钢渣资源化利用技术研究现状

《钢铁研究学报》

2015

Emerging pollutants—Part II: Treatment

Water environment research

DOI

2015

Antimony recovery from SbCl5 acid solution by hydrolysis and aging

Rare Metals

DOI

2015

Waste bearing steel relegation reuse method

2015

Challenges in legislation, recycling system and technical system of waste electrical and electronic equipment in China.

Waste Management

DOI

2015

Effect of temper rolling on the bake-hardening behavior of low carbon steel

International Journal of Minerals, Metallurgy, and Materials

DOI

2015

Complete Recovery of Eu from BaMgAl10O17:Eu2+ by Alkaline Fusion and Its Mechanism.

DOI

2015

Effect of TiO2 on Crystallization, Microstructure and Mechanical Properties of Glass-ceramics

DOI

2015

Bonded cylindrical Terfenol-D-epoxy/PZT magnetoelectric composites prepared by the one-step compression molding

DOI

2015

Facile scalable synthesis and superior lithium storage performance of ball-milled MoS2–graphite nanocomposites

DOI

2015

Free oxoanion theory for BaMgAl10O17:Eu2+ structure decomposition during alkaline fusion process

DOI

2015

Effect of Continuous Annealing on Microstructure and Bake Hardening Behavior of Low Carbon Steel

DOI

2015

Mechanism of CeMgAl11O19: Tb3+ alkaline fusion with sodium hydroxide

Rare Metals

DOI

2015

eory for BaMgAl 10 O 17 : Eu 2 + structure decomposition during alkaline fusion process

2015

structure decomposition during alkaline fusion process

2014

NdFeB铸片渗Dy工艺及其机理研究

《磁性材料及器件》

2014

快速热处理对低碳钢烘烤硬化性能的影响

《材料研究学报》

2014

22MnB5热冲压钢的研究进展

《锻压技术》

2014

锌液中的Al含量对热冲压钢锌层组织的影响

《材料研究学报》

2014

Effect of Al Content on the Microstructure of Hot-Depped Zinc Coating on Hot Stamping Steel

DOI

2014

Room-temperature one-step-method mold-free method for preparing bonding cylindrical layered magnetoelectric composite material

2014

Phosphorus content effect on the magnetoelectric properties of the Ni–P(Ni)/PZT/Ni–P(Ni) cylindrical layered composites

DOI

2014

Effect of Rapid Heat Treatment on Bake Hardening Behavior of a Low Carbon Steel

DOI

2014

Effects of pre-strain and baking parameters on the microstructure and bake-hardening behavior of dual-phase steel

International Journal of Minerals, Metallurgy, and Materials

DOI

2014

Effect of strip entry temperature on the formation of interfacial layer during hot-dip galvanizing of press-hardened steel

DOI

2014

Effects of quenching and tempering on the microstructure and bake hardening behavior of ferrite and dual phase steels

DOI

2014

Recovery of copper and tin from stripping tin solution by electrodeposition

Rare Metals

DOI

2014

A heavy metal waste gypsum reduction, decontamination and disposal method resources

2014

Preparation of BaPbO3 functional ceramics from leaded waste

Rare Metals

DOI

2014

Enhanced magnetoelectric effect in magnetostrictive/piezoelectric laminates through adopting magnetic warm compaction Terfenol-D

DOI

2014

One-step preparation of the adhesive at room temperature the cylindrical mold without magnetic layered composite method

2014

A method for waste in the rare-earth phosphor and alumina oxide glassy residues removed

2014

Procédé de traitement de ressource d'innocuité par réduction à un minimum de déchets de gypse contenant des métaux lourds

2014

Method for recycling noble metal from automobile exhaust catalyst

2014

Preparation of pure SnO2 powders from tin slag of printed circuit boards waste

Rare Metals

DOI

2014

Rare earth elements recycling from waste phosphor by dual hydrochloric acid dissolution.

Journal of Hazardous Materials

DOI

2013

热冲压钢镀层技术的研究现状

《钢铁研究学报》

2013

Electromagnetic and microwave absorbing properties of FeCoB powder composites

Rare Metals

DOI

2013

Architecturing high magnetic properties of NdFeB/SmFeN hybrid magnets

DOI

2013

ZnO/TiO2 nanocable structured photoelectrodes for CdS/CdSe quantum dot co-sensitized solar cells.

Nanoscale

DOI

2013

Architectured ZnO photoelectrode for high efficiency quantum dot sensitized solar cells

DOI

2013

Recycle of valuable products from oily cold rolling mill sludge

International Journal of Minerals, Metallurgy, and Materials

DOI

2013

Method for regenerating aluminum alloy with target ingredient from scrap aluminum

2013

Method for recycling calcium and sulfur in heavy metal chemical gypsum

2013

Nanometer tungsten carbide powder preparing method

2013

Constructing ZnO nanorod array photoelectrodes for highly efficient quantum dot sensitized solar cells

DOI

2013

One waste circuit boards or metal powder melting pretreatment method

2013

WITHDRAWN: A critical review of recycling rare-earths from waste phosphor.

Waste Management

DOI

2013

Peak divergence in the curve of magnetoelectric coefficient versus dc bias magnetic field at resonance region for bi-layer magnetostrictive/piezoelectric composites

DOI

2013

New technology for recyclingmaterials from oily cold rollingmill sludge

International Journal of Minerals, Metallurgy, and Materials

DOI

2013

Recovery of waste rare earth fluorescent powders by two steps acid leaching

Rare Metals

DOI

2013

Recycle Rare Earth from Wastephosphor by a Two-Step Method

DOI

2013

Preparation of nano tungsten carbide powder

2013

Method multi-field coupling preparation magnetoelectric composite

2012

Method of recycling of waste easy-open aluminum cans

2012

Enhanced Performance of CdS/CdSe Quantum Dot Cosensitized Solar Cells via Homogeneous Distribution of Quantum Dots in TiO2 Film

DOI

2012

Method for preparing porous heat-insulating material from Cr-containing steel slag

2012

Rapid annealing effects on microstructure, texture, and magnetic properties of non-oriented electrical steel

Metals and Materials International

DOI

2012

Circular processing method of stainless steel acid washing waste liquid

2012

Method for recovering rare earth from waste rare earth luminescent material

2012

Co-reduction synthesis of uniform ferromagnetic SmCo nanoparticles

DOI

2011

稀土永磁材料现状及研发方向思考

《新材料产业》

2011

Heat treatment effects on Fe3O4 nanoparticles structure and magnetic properties prepared by carbothermal reduction

DOI

2011

Mn—Zn Soft Magnetic Ferrite Nanoparticles Synthesized from Spent Alkaline Zn—Mn Batteries.

DOI

2011

Fuel additives and heat treatment effects on nanocrystalline zinc ferrite phase composition

DOI

2011

Rapid heating effects on grain-size, texture and magnetic properties of 3% Si non-oriented electrical steel

DOI

2011

Effect of annealing process of iron powder on magnetic properties and losses of motor cores

DOI

2010

Current-voltage characteristics of lead zirconate titanate/nickel bilayered hollow cylindrical magnetoelectric composites

DOI

2010

铁粉热处理对铁基软磁材料性能的影响

《材料热处理学报》

DOI

2010

Bonded Terfenol-D composites with low eddy current loss and high magnetostriction

DOI

2010

Heat treatment effects on microstructure and magnetic properties of Mn–Zn ferrite powders

DOI

2010

Procédé de recyclage sans cyanure de déchets de cartes de circuits imprimés

2010

Controllable temperature gradient unidirectional solidification device and method

2010

Carbothermal reduction method for Fe3O4 powder synthesis

DOI

2010

Method and device for recovering metal tin from lead separated slag of copper anode slime

2010

Method and device for recovering metallic lead from lead plaster of waste lead-acid storage battery

2010

Progress in Evolution of Structure and Texture during Annealing in Cold Rolled Non-oriented Silicon Steels

2010

Effect of Heating Rate on Microstructure Evolution and Magnetic Properties of Cold Rolled Non-Oriented Electrical Steel

DOI

2010

Preparation and Magnetic Properties of Zinc Ferrite Nanoparticales

2009

Heap-leaching method for separating copper and tin from tin-plated copper wires

2009

Radial cracks and fracture mechanism of radially oriented ring 2:17 type SmCo magnets

DOI

2009

Method for recovering lead from lead paste of waste lead-acid battery

2008

采用石蜡基粘结剂体系制备注射成形Sm2Co17永磁体

《工程科学学报》

2008

2:17-type SmCo magnets prepared by powder injection molding using a water-based binder

DOI

2008

Method for preparing spherical shell layered magnetoelectric composite material

2007

注射成形粘结Nd-Fe-N/Nd-Fe-B复合磁体的研究

《功能材料》

2007

Sm-Co基整体辐向永磁环的制备及性能

《稀有金属材料与工程》

2007

磁粉粒度对注射成形粘结NdFeB磁体性能的影响

《中国有色金属学报》

2007

温压成形制备d-HDDR各向异性钕铁硼粘结磁体的研究

《粉末冶金工业》

2007

氧对Sm（Co,Fe,Cu,Zr）z永磁体性能和显微组织的影响

《工程科学学报》

2007

Influence of heat treatment on fracture and magnetic properties of radially oriented Sm2Co17 permanent magnets

DOI

2007

注射成形烧结钕铁硼永磁体的工艺特点及发展趋势

《稀土》

2007

注射成型烧结永磁铁氧体辐射环的制备及脱脂工艺研究

《金属热处理》

2007

Effects of oxygen on the microstructure and magnetic properties of Sm(Co, Fe, Cu, Zr)_z permanent magnets

2007

Behavior of residual carbon in Sm(Co, Fe, Cu, Zr)z permanent magnets

DOI

2007

Method for preparing tail fin of fixing rocket missile by using composite powder as raw material

2007

Method for reclaiming metals by classified electrolysis of electron wastes

2007

Magnetic properties and microstructure of radially oriented Sm(Co,Fe,Cu,Zr) z ring magnets

DOI

2007

Effects of oxygen and carbon on the magnetic properties and micro-structure of Sm2Co17 permanent magnets

DOI

2006

2:17型Sm-Co整体辐向永磁环烧结工艺的研究

《功能材料》

2006

Antioxidation Study of Sm(Co, Cu, Fe, Zr)z-Sintered Permanent Magnets by Metal Injection Molding

DOI

2005

Preparation method of radiation orientation integral permanent magnetic ring

2005

Process for preparing tungsten parts and components with complicated shape and high dimensional accuracy

2004

Si衬底上SrMnO3缓冲层对La0.8Sr0.2MnO3薄膜择优取向生长的影响

《稀有金属》

2004

Effect of Directional Solidification Rate on Preferred Orientation, Microstructure and Magnetostriction of (Tb0.3Dy0.7)Fe1.95 Alloys

DOI

2003

快冷厚带-氢破碎-磁场成型工艺制备高性能烧结钕铁硼磁体

《稀有金属》

2003

稀土金属功能材料研究进展与趋势

《新材料产业》

2003

稀土超磁致伸缩材料进展

《金属功能材料》

2002

NdFeB快冷厚带的显微组织与特点

《磁性材料及器件》

2000

机械合金化制备高性能NdFe10.5Mo1.5Nx永磁粉

《功能材料》

1999

间隙型氮化物稀土永磁材料研究进展

《金属功能材料》

2021

再生变形铝合金成套关键技术研发及应用

《2021年中国铝加工产业年度大会暨中国(湖州)铝加工绿色智造高峰论坛论文集（上册）》

DOI

2015

战略性金属再生利用的战略思考

《2015中国功能新材料学术论坛暨第四届全国电磁材料及器件学术会议摘要集》

2010

纳米锌铁氧体的制备及磁性能研究

《第七届中国功能材料及其应用学术会议论文集（第4分册）》

2010

磷酸包覆铁粉基软磁复合材料的制备与性能研究

《第七届中国功能材料及其应用学术会议论文集（第6分册）》

2010

多元醇还原合成超细球形钴粉的研究

《第七届中国功能材料及其应用学术会议论文集（第3分册）》

2009

铁粉基软磁材料在交变磁场下的磁损耗机制

《2009年全国粉末冶金学术会议》

2008

纳米锰锌铁氧体的制备及磁性能

《2008全国功能材料科技与产业高层论坛》

2005

金属注射成形Sm（Co,Cu,Fe,Zr） z 永磁体的抗氧化研究

《第十二届全国磁学和磁性材料会议》

2004

Si衬底上La 0.8 Sr 0.2 MnO 3 /SrMnO 3 双层结构研究

《第五届中国功能材料及其应用学术会议论文集Ⅰ》

2001

磁性功能材料用高纯金属铽的制备研究

《第四届中国功能材料及其应用学术会议》

1998

Pr 1.25 Fe 10.2 Mo 1.5 Co 0.3 及其氮化物结构和磁性能研究

《第三届中国功能材料及其应用学术会议》

1998

机械研磨制备Nd 1.5 Fe 10.5 Mo 1.5 N x 间隙氮化物的工艺条件研究

《第三届中国功能材料及其应用学术会议》