张景德｜山东大学｜学者主页

2026

Turning performance and wear modes of CVD-TiC0.7N0.3/Al2O3 coated Si3N4 and SiAlON cutting tools

Wei Ning, Xin-Xin Cao, Guangyao Wang, Ke-Xue Peng, Qiang Zhang, G. Han, Jingde Zhang, Weili Wang, Wei-Bin Zhang, Feng Sun, Zaiyi Wang

Wear

DOI

2026

Nanowire-toughened high-performance SiC ceramics via digital light processing 3D printing and one-step pyrolysis

Xiao-Zhen Lu, Jun-Gui Zhang, Xin-Xin Cao, Jun-Bin Lu, Jingde Zhang, G. Han, Jianhui Jiang

Ceramics International

DOI

2025

Al-C-X(X=Mo,Nb,Ta,V)的相图热力学计算

石闯，夏新，张伟彬，王伟礼，韩桂芳，龚红宇，张景德

《材料工程》

2025

The Influence of dual sintering additives on the comprehensive performance of YSZ composite electrolyte

Yaya Liu, Shuangshuang Liu, Long Wang, Xin-Xin Cao, Shuangxiao Zhu, G. Han, Ying Qiao, Jingde Zhang

Ceramics International

DOI

2025

Gradient tri-layered TGOs in MoSi 2/HfO 2 duplex EBCs for effective protection of SiC substrate against steam corrosion at 1500 °C for 200 h

Ke-Xue Peng, Ying Qiao, Qian Li, Xin-Xin Cao, Long Wang, G. Han, Jianzhang Li, Jingyu Qin, Jingde Zhang

Journal of Advanced Ceramics

DOI

2025

The influence of two-step sintering on the hardness and electrical performance of Bi-doped YSZ composite electrolyte

Yaya Liu, Shuangshuang Liu, Long Wang, Kexue Peng, Guifang Han, Ying Qiao, Jingde Zhang

Journal of Alloys and Compounds

DOI

2024

Regulating the composition, structure, and nanoscale dimensions of Yb 2Si 2O 7 environmental barrier coating to achieve a biomimetic teakwood-like functional structure by waste gas recycling

Jun-Gui Zhang, G. Han, Xin-Xin Cao, Xiaofeng Zhang, Jingde Zhang, Min Liu, Ke-Song Zhou

Journal of Advanced Ceramics

DOI

2024

Preparation of excellent performance ZTA ceramics and complex shaped components using digital light processing 3D printing technology

Sijie Wei, G. Han, Xu Zhang, Jian Sun, Weili Wang, Jia-Tai Zhang, Zhi-Xuan Zhang, Wei-Bin Zhang, Jingde Zhang, Lianhong Yang, Jianzhang Li, Ying Qiao

Journal of Alloys and Compounds

DOI

2024

Anti-oxidation properties and phase composition evolution of the MoSi2-HfO2 duplex bond coat in air and steam/oxygen atmosphere at 1450 °C

Ke-Xue Peng, G. Han, Jianzhang Li, Long Wang, Wei-Bin Zhang, Weili Wang, Jingde Zhang

Surface & Coatings Technology

DOI

2024

Oxidation mechanism of the Si-X (X=HfO2, Yb2O3 or HfO2+Yb2O3) composite systems in air and water vapor at 1300 ℃

Panxin Huang, Ke-Xue Peng, G. Han, Jianzhang Li, Shikang Xiao, Xin-Xin Cao, Jingde Zhang

Journal of Alloys and Compounds

DOI

2023

Preparation of high performance dense Al2O3 ceramics by digital light processing 3D printing technology

Sijie Wei, G. Han, Xu Zhang, Jian Sun, Jingde Zhang, Weili Wang, Wei-Bin Zhang, Lianhong Yang, Jianzhang Li

Ceramics International

DOI

2023

Evaluation of environmental barrier coatings: A review

Shikang Xiao, Jian-Zhang Li, Panxin Huang, Antong Zhang, Yuhang Tian, Xu Zhang, Jingde Zhang, J. Ryu, Guifang Han

International Journal of Applied Ceramic Technology

DOI

2023

Photosensitive Al_2O_3 slurry with high solid content and low viscosity

Xu Zhang, Jingde Zhang, Yuhang Tian, Shikang Xiao, Jian-Zhang Li, Guifang Han

Journal of the Korean Ceramic Society

DOI

2023

Preparation of Bi2O3–YSZ and YSB–YSZ Composite Powders by a Microemulsion Method and Their Performance as Electrolytes in a Solid Oxide Fuel Cell

Shu Liu, Jingde Zhang, Yuhang Tian, Jian Sun, Panxin Huang, Jian-Zhang Li, Guifang Han

Materials

DOI

2023

In-situ mullite whisker reinforced SiC porous ceramics with whiskers and bonding layers synchronously growing: Using CaF2 as a temperature-controlled whisker formation switch

Zi-He Li, Jian Sun, Xu Zhang, Jingde Zhang, G. Han

Journal of the European Ceramic Society

DOI

2023

High strength mullite-bond SiC porous ceramics fabricated by digital light processing

Jian Sun, Jingde Zhang, Xu Zhang, Zi-He Li, Jianzhang Li, Sijie Wei, Wei-Bin Zhang, Weili Wang, G. Han

Journal of Advanced Ceramics

DOI

2022

Process optimization for Hafnia‐doped silicon bond coats fabricated by plasma spraying for SiC‐CMC

Xinran Liu, Shikang Xiao, Z. Chang, Xu Zhang, Yuhang Tian, Guifang Han, Jian-Zhang Li, Jingde Zhang

International Journal of Applied Ceramic Technology

DOI

2022

Controlled synthesis of Bi 2 O 3 ‐YSZ composite powders and their sintering behavior for high‐performance electrolytes

Yuhang Tian, Shu Liu, Xu Zhang, Shikang Xiao, Jian Sun, Jingde Zhang, Guifang Han

International Journal of Applied Ceramic Technology

DOI

2022

Si-HfO2 composite powders fabricated by freeze drying for bond layer of environmental barrier coatings

Shikang Xiao, Xinran Liu, Z. Chang, Yuhang Tian, Xu Zhang, Guifang Han, Jian-Zhang Li, Jingde Zhang

Ceramics International

DOI

2022

Exploration of the oxidation behavior and doping ratio of the Si‐HfO 2 bond layer used in environmental barrier coatings

Shikang Xiao, Jian-Zhang Li, Xinran Liu, Z. Chang, Panxin Huang, Antong Zhang, Yuhang Tian, Xu Zhang, Jingde Zhang, Guifang Han

International Journal of Applied Ceramic Technology

DOI

2022

In‐Situ Formation of Mullite strengthened SiC Porous Ceramics via Gelcasting with High Strength and Good Alkali Resistance

Z. Chang, Zi-He Li, Xinran Liu, Xu Zhang, Shikang Xiao, Yuhang Tian, Aijun Li, Jingde Zhang, Jian-Zhang Li, Guifang Han

International Journal of Applied Ceramic Technology

DOI

2022

Synthesis of γ‐Bi 2 O 3 /YSZ composite powders using a facile precipitation method

Yuhang Tian, Bao-Xin Jia, Xu Zhang, Shikang Xiao, Jian-Zhang Li, Shu Liu, Guanghui Min, Guifang Han, Aijun Li, Jingde Zhang

International Journal of Applied Ceramic Technology

DOI

2021

A novel sintering additive system for porous mullite-bonded SiC ceramics: High mechanical performance with controllable pore structure

Zi-He Li, Z. Chang, Xinran Liu, Wei-Min Zhao, Xu Zhang, Shikang Xiao, Yuhang Tian, Ai-Jun Li, Guifang Han, Jian-Zhang Li, Jingde Zhang

Ceramics International

DOI

2020

A simple method to control the pore structure and shape of freeze-cast porous SiC ceramics

Zi-He Li, Zhenhui Zhang, Wei-Min Zhao, Xiang-Yu Li, Guifang Han, Jingde Zhang

DOI

2018

Low-temperature sintering and microstructure evolution of Bi2O3-doped YSZ

Jianxun Han, Jingde Zhang, Fei Li, Jun-Peng Luan, Bao-Xin Jia

DOI

2017

PREPARATION OF Bi2O3-DOPED NiO/YSZ ANODE MATERIALS FOR SOFCs

Fei Li, Jingde Zhang, Jun-Peng Luan, Ya-Lei Liu, Jianxun Han

DOI

2017

Synthesis and growth mechanism of various structures Bi2O3 via chemical precipitate method

Bao-Xin Jia, Jingde Zhang, Jun-Peng Luan, Fei Li, Jianxun Han

Journal of Materials Science: Materials in Electronics

DOI

2016

Effects of Pore-Forming Agent on Characterization of NiO/YSZ Porous Anode for SOFC

C. K. Ding, Jingde Zhang, Ya-Lei Liu, Jin-Yan Gou, Jun-Peng Luan

DOI

2016

Influence of Bi2O3 on Microstructure and Properties of YSZ Solid Electrolyte Material

Jun-Peng Luan, Jingde Zhang, Ya-Lei Liu, C. K. Ding, Fei Li

DOI

2016

Preparation of Anode-Supported SOFC Electrolyte Membrane and Porous Anode Material

Fei Li, Jingde Zhang, Jun-Peng Luan, Ya-Lei Liu

DOI

2016

Bi_2O_3/YSZ固体電解質材料の制御された合成と成長機構【Powered by NICT】

Jun-Peng Luan, Jingde Zhang, Xiao-Mei Yao, Fei Li, Bao-Xin Jia

2016

Controlled synthesis and growth mechanism of Bi2O3/YSZ solid electrolyte materials

Jun-Peng Luan, Jingde Zhang, Xiao-Mei Yao, Fei Li, Bao-Xin Jia

DOI

2015

原位生成Fe-Al/Al2O3复合陶瓷涂层

张景德，李厚义，苟金艳，丁昌库，邢丽娟

《人工晶体学报》

2015

In-situ Synthesis of Fe-Al/Al_2O_3 Composite Ceramic Coatings

Jingde Zhang

2015

Fe‐Al/Al_2O_3複合セラミック被覆のその場合成

Jingde Zhang, Hou-Yi Li, Jin-Yan Gou, C. Ding, Li-Juan Xing

2011

Fe-Al/Al2O3复合陶瓷涂层制备与性能 = Preparation and properties of composite ceramic coating

张景德

《化学工业出版社》

2010

Fabrication and Properties of Nano‐Structural Bi2O3‐Y2O3‐ZrO2 Composite

Jingde Zhang, K. Sun, J. Ouyang, J. Gao, Han-Yang Liu, T. An, Li-Juan Xing

DOI

2009

氧化锆纳米粉体的湿化学法制备工艺进展

徐廷鸿，张景德，古娜，王洪升，汪江艇

《陶瓷》

2008

化学镀法制备Fe包覆Al复合粉末

田宝艳，张景德，毕见强，古娜，徐廷鸿

《人工晶体学报》

2008

Sliding wear behavior of plasma sprayed Fe3Al–Al2O3 graded coatings

Jingde Zhang, K. Sun, Jiang-Ting Wang, Baoyan Tian, Hong-Sheng Wang, Yan-sheng Yin

DOI

2008

Residual Thermal Stresses in a Fe3Al/Al2O3 Gradient Coating System

Jiang-Ting Wang, P. Hodgson, Jingde Zhang, Chun-Hui Yang

DOI

2006

钇稳定氧化锆纳米粉体制备技术研究进展

王洪升，王贵，张景德，徐廷鸿

《硅酸盐通报》

2006

水基凝胶注模法YSZ陶瓷浆料性能的研究

王洪升，张景德，徐廷鸿，王琳，田宝艳

《现代技术陶瓷》

2005

Fe-Al/Al2O3梯度涂层制备过程中的热机械行为

刘英才，尹衍升，王昕，张景德

《航空材料学报》

2004

陶瓷涂层热喷涂制备工艺

刘耀斌，赵红军，于乐海，张景德

《现代技术陶瓷》

2004

球磨合成Fe3Al金属间化合物及其固相反应机理

范润华，陈云，张景德，尹衍升

《功能材料》

2004

Fe3Al增韧3Y-TZP基复合材料抗热震性能研究

刘强，尹衍升，李嘉，张景德

《材料热处理学报》

DOI

2004

Mechanical properties of Fe 3Al/Al 2O 3 composite graded coatings

Yan-sheng Yin, Jingde Zhang, Jia Li, Yun Chen

DOI

2003

Fe3Al-Al2O3陶瓷梯度涂层性能研究

张景德，尹衍升，张虹，李静

《材料工程》

2003

Fe3Al/Al2O3梯度复合涂层的摩擦磨损性能

尹衍升，张景德，李嘉，甄玉花，张银燕，陈云

《摩擦学学报(中英文)》

2003

Fe3Al/Al2O3陶瓷复合梯度涂层抗热震性研究

尹衍升，高振民，张景德，李嘉，陈坤，卢瑶

《硅酸盐学报》

2003

Al2O3/Fe3Al复合材料的制备及性能

尹衍升，龚红宇，李嘉，张景德，郝春成

《硅酸盐学报》

2003

等离子喷涂Fe3Al-Al2O3陶瓷梯度涂层

张景德，尹衍升，张虹，李静

《机械工程材料》

2003

Fabrication and properties of Fe3Al–Al2O3 graded coatings

Jingde Zhang, Yan-sheng Yin, Jing Li, Hong Zhang

DOI

2003

Plasma Spray Fe3Al-Al2O3 Graded Coatings

Yan-Kun Yin, Jingde Zhang, Hong Zhang, Jing Li

DOI

2003

Tribological Properties of Plasma Sprayed Fe3Al-Al2O3 Graded Coatings

Jingde Zhang, Yan-Kun Yin, Jing Li, K. Sun, Hong Zhang

DOI

2002

陶瓷涂层材料的应用与发展

张景德，尹衍升，李静，张虹

《机械工程材料》

2002

基体表面状态对Fe3Al/Al2O3复合涂层性能的影响

张景德，尹衍升，李静

《山东大学学报(工学版)》

2002

Fe3Al/Al2O3陶瓷复合材料承载条件下的声学特征

张景德，孙康宁，尹衍升，王昕，刘睿

《山东大学学报(工学版)》

2001

Fe-Al/Al2O3功能梯度涂层材料研究现状及展望

李静，张景德，尹衍升，孟繁琴

《山东大学学报(工学版)》

2000

承载Fe3Al/Al2O3复合材料失效过程声像特征

孙康宁，尹衍升，安阁英，张景德

《自然科学进展》

1999

Fe-Al金属间化合物粉末材料制备工艺研究

张玉军，尹衍升，谭训彦，龚红宇，张景德

《粉末冶金工业》

1999

均分散纳米复合陶瓷的制备工艺

王昕，张景德，孙康宁，尹衍升，侯耀永，周玉

《复合材料学报》

1998

Effect of alloying elements on valence electron structure (VES) of Fe3A1 intermetallic compounds

K. Sun, Jingde Zhang, Yan-sheng Yin

DOI

1997

承载条件下材料声学显微结构偏转特征分析

孙康宁，张景德，刘援朝，王昕，尹衍升，张送根

《中国有色金属学报》

1997

陶瓷材料质量无损检测研究

孙康宁，王昕，刘援朝，张景德，尹衍升，Ｍａｓｌｏｖ．Ｋ．Ｉ

《硅酸盐通报》

1996

双层可焊接陶瓷刀具材料界面声学显微结构特征分析

孙康宁，刘援朝，王昕，张景德，尹衍升，ＭａｓｌｏｖＫＩ

《复合材料学报》

精选作品

期刊论文

Turning performance and wear modes of CVD-TiC0.7N0.3/Al2O3 coated Si3N4 and SiAlON cutting tools

Nanowire-toughened high-performance SiC ceramics via digital light processing 3D printing and one-step pyrolysis

Al-C-X(X=Mo,Nb,Ta,V)的相图热力学计算

The Influence of dual sintering additives on the comprehensive performance of YSZ composite electrolyte

Gradient tri-layered TGOs in MoSi 2/HfO 2 duplex EBCs for effective protection of SiC substrate against steam corrosion at 1500 °C for 200 h

The influence of two-step sintering on the hardness and electrical performance of Bi-doped YSZ composite electrolyte

Regulating the composition, structure, and nanoscale dimensions of Yb 2Si 2O 7 environmental barrier coating to achieve a biomimetic teakwood-like functional structure by waste gas recycling

Preparation of excellent performance ZTA ceramics and complex shaped components using digital light processing 3D printing technology

Anti-oxidation properties and phase composition evolution of the MoSi2-HfO2 duplex bond coat in air and steam/oxygen atmosphere at 1450 °C

Oxidation mechanism of the Si-X (X=HfO2, Yb2O3 or HfO2+Yb2O3) composite systems in air and water vapor at 1300 ℃

Preparation of high performance dense Al2O3 ceramics by digital light processing 3D printing technology

Evaluation of environmental barrier coatings: A review

Photosensitive Al_2O_3 slurry with high solid content and low viscosity

Preparation of Bi2O3–YSZ and YSB–YSZ Composite Powders by a Microemulsion Method and Their Performance as Electrolytes in a Solid Oxide Fuel Cell

In-situ mullite whisker reinforced SiC porous ceramics with whiskers and bonding layers synchronously growing: Using CaF2 as a temperature-controlled whisker formation switch

High strength mullite-bond SiC porous ceramics fabricated by digital light processing

Process optimization for Hafnia‐doped silicon bond coats fabricated by plasma spraying for SiC‐CMC

Controlled synthesis of Bi 2 O 3 ‐YSZ composite powders and their sintering behavior for high‐performance electrolytes

Si-HfO2 composite powders fabricated by freeze drying for bond layer of environmental barrier coatings

Exploration of the oxidation behavior and doping ratio of the Si‐HfO 2 bond layer used in environmental barrier coatings

In‐Situ Formation of Mullite strengthened SiC Porous Ceramics via Gelcasting with High Strength and Good Alkali Resistance

Synthesis of γ‐Bi 2 O 3 /YSZ composite powders using a facile precipitation method

A novel sintering additive system for porous mullite-bonded SiC ceramics: High mechanical performance with controllable pore structure

A simple method to control the pore structure and shape of freeze-cast porous SiC ceramics

Low-temperature sintering and microstructure evolution of Bi2O3-doped YSZ

PREPARATION OF Bi2O3-DOPED NiO/YSZ ANODE MATERIALS FOR SOFCs

Synthesis and growth mechanism of various structures Bi2O3 via chemical precipitate method

Effects of Pore-Forming Agent on Characterization of NiO/YSZ Porous Anode for SOFC

Influence of Bi2O3 on Microstructure and Properties of YSZ Solid Electrolyte Material

Preparation of Anode-Supported SOFC Electrolyte Membrane and Porous Anode Material

Bi_2O_3/YSZ固体電解質材料の制御された合成と成長機構【Powered by NICT】

Controlled synthesis and growth mechanism of Bi2O3/YSZ solid electrolyte materials

原位生成Fe-Al/Al2O3复合陶瓷涂层

In-situ Synthesis of Fe-Al/Al_2O_3 Composite Ceramic Coatings

Fe‐Al/Al_2O_3複合セラミック被覆のその場合成

Fe-Al/Al2O3复合陶瓷涂层制备与性能 = Preparation and properties of composite ceramic coating

Fabrication and Properties of Nano‐Structural Bi2O3‐Y2O3‐ZrO2 Composite

氧化锆纳米粉体的湿化学法制备工艺进展

化学镀法制备Fe包覆Al复合粉末

Sliding wear behavior of plasma sprayed Fe3Al–Al2O3 graded coatings

Residual Thermal Stresses in a Fe3Al/Al2O3 Gradient Coating System

钇稳定氧化锆纳米粉体制备技术研究进展

水基凝胶注模法YSZ陶瓷浆料性能的研究

Fe-Al/Al2O3梯度涂层制备过程中的热机械行为

陶瓷涂层热喷涂制备工艺

球磨合成Fe3Al金属间化合物及其固相反应机理

Fe3Al增韧3Y-TZP基复合材料抗热震性能研究

Mechanical properties of Fe 3Al/Al 2O 3 composite graded coatings

Fe3Al-Al2O3陶瓷梯度涂层性能研究

Fe3Al/Al2O3梯度复合涂层的摩擦磨损性能

Fe3Al/Al2O3陶瓷复合梯度涂层抗热震性研究

Al2O3/Fe3Al复合材料的制备及性能

等离子喷涂Fe3Al-Al2O3陶瓷梯度涂层

Fabrication and properties of Fe3Al–Al2O3 graded coatings

Plasma Spray Fe3Al-Al2O3 Graded Coatings

Tribological Properties of Plasma Sprayed Fe3Al-Al2O3 Graded Coatings

陶瓷涂层材料的应用与发展

基体表面状态对Fe3Al/Al2O3复合涂层性能的影响

Fe3Al/Al2O3陶瓷复合材料承载条件下的声学特征

Fe-Al/Al2O3功能梯度涂层材料研究现状及展望

承载Fe3Al/Al2O3复合材料失效过程声像特征

Fe-Al金属间化合物粉末材料制备工艺研究

均分散纳米复合陶瓷的制备工艺

Effect of alloying elements on valence electron structure (VES) of Fe3A1 intermetallic compounds

承载条件下材料声学显微结构偏转特征分析

陶瓷材料质量无损检测研究

双层可焊接陶瓷刀具材料界面声学显微结构特征分析

会议论文

NiO/YSZ多孔阳极材料制备与性能

研究方向