郭瑜

期刊论文

1. 陈鑫，张飞祥，郭瑜，王勇，马子胜（2026）. 面向低转速及变转速复合工况下滚动轴承故障诊断研究. 《振动工程学报》.
2. 汪林，郭瑜（2026）. 时变载荷下主轴承外滚道剥落IAS动力学建模. 《航空动力学报》.DOI
3. 张珈源，郭瑜，吴显良（2026）. 基于WSAM的滚动轴承故障IAS信号特征提取. 《振动、测试与诊断》.DOI
4. 李超，郭瑜，陈鑫（2026）. 故障轴承IAS角域动力学模型驱动的PINN及动力学参数估计. 《振动与冲击》.
5. Yu Guo, Hai-Bin Zhao, Hexing Liu, Guo-Qun Zhao (2026). Laser ablated grid microstructure and carbon nanotubes (CNTs) induced superhydrophobic CNTs/epoxy composites for synergistic photothermal and electrothermal anti-icing/deicing. Progress in Organic Coatings.DOI
6. H. Wang, Yu Guo, Xingchao Yin, Xin Chen, Zhile Wang (2026). Flexspline tooth fault detection in harmonic drives using instantaneous angular speed signal energy-difference weighting. Structural Health Monitoring.DOI
7. Junhui Ge, Zhile Wang, Xiaoli Yu, Yu Guo, Jie Yang, Zijian Qiao (2026). Research on a novel stochastic resonance based on a three-dimensional multi-scroll chaotic system and its applications. Physica D Nonlinear Phenomena.DOI
8. Chao Li, Yu Guo, Xin Chen (2026). IAS responses mechanism of spalled outer race ball bearings for quantitative analysis under low speed condition: dynamic modeling and experiment. Journal of Sound and Vibration.DOI
9. Qiao Han, Yu Guo, Jiawei Fan, Jing Na, Xingchao Yin (2026). A dynamic model for instantaneous angular speed jitter in low-speed rolling element bearing to mimic natural spalling zone on outer race. Mechanical Systems and Signal Processing.DOI
10. Zhile Wang, Xiaoli Yu, Yu Guo, Xin Chen, Wei Kang (2026). Research on High-Order Vese–Osher Model Based on Partial Differential Equation and Its Application in Planetary Gearbox Fault Diagnosis. IEEE Transactions on Instrumentation and Measurement.DOI
11. Xin Chen, Chao Li, Yanlei Yin, Yu Guo, Tao Liu (2026). Bearing Fault Detection Under Low-Speed and Variable-Speed Conditions: An Adaptive Multiperiod Cumulative Cross-Reference Correlation Coefficient Signal Reconstruction. IEEE Transactions on Instrumentation and Measurement.DOI
12. 郭瑜，杨程涛，陈锋，姜沛汶，李冰，马彦操，徐睿，霍学松，田咪，武腾飞（2025）. 基于透反融合式激光的煤水混合物浓度测量装置. 《工矿自动化》.
13. 张佳鑫，郭瑜（2025）. 基于ASA-MCKD的IAS信号针齿故障特征提取研究. 《机电工程》.
14. 李超，郭瑜，罗茂林，陈鑫（2025）. 球轴承外圈剥落初期双冲击现象IAS建模. 《振动工程学报》.
15. 樊家伟，郭瑜，尹兴超，邹翔，王红伟（2025）. 利用伺服电机自带编码器的齿轮局部故障检测. 《振动工程学报》.
16. Yu Guo, Hai-Bin Zhao, Guo-Qun Zhao (2025). Laser-Induced Superhydrophobic Polymer Surface for Droplet Manipulation, Controllable Light-Driven Actuator, and Underwater Motion Monitoring. ACS Applied Materials and Interfaces.DOI
17. Yubo Lyu, Yu Guo, Jiangbo Li, Haipeng Wang (2025). Enhancement of Inner Race Fault Features in Servo Motor Bearings via Servo Motor Encoder Signals. Vibration.DOI
18. H. Wang, Yu Guo, Xiangshi Yin, Jiawei Fan (2025). Error compensation for instantaneous angular speed under industrial robot operating conditions. Journal of Vibration and Control.DOI
19. Chen Xin, Yong Wang, Yong Long, Yu Guo, Feixiang Zhang, Zhihao Ma (2025). Adaptive Fault Size Estimation of Rolling Element Bearing Outer Race under Low-Speed and Variable-Speed Conditions.DOI
20. Chao Li, Xin Chen, Yu Guo, Yong Long (2025). Physics-Informed Neural Network for Angular Dynamic Model Parameters Estimation of Faulty Bearing Oriented to Optical Encoder Signal.DOI
21. Xingchao Yin, Yu Guo, Jing Na, Jiawei Fan (2025). Modeling and Compensation of Eccentricity Errors for Accurate Speed Acquisition in Nonstationary Conditions. IEEE Transactions on Industrial Electronics.DOI
22. Maolin Luo, Yu Guo, Zuqiang Su, Zhi Chao Tang, Xin Wang, Hugo André, Yunhao Peng (2025). Defect element segmentation-based vibration analysis of ball bearings: dynamic modelling and experiments. Nonlinear Dynamics.DOI
23. Zhile Wang, Xiaoli Yu, Yu Guo, Wei Kang, Xin Chen (2025). A noise-enhanced feature extraction method combined with tunable Q-factor wavelet transform and its application to planet-bearing fault diagnosis. Applied Acoustics.DOI
24. Chao Li, Yu Guo, Xin Chen, Maolin Luo (2025). A nonlinear dynamic model of instantaneous angular speed for bearing incipient spall extension under low-speed condition. Nonlinear Dynamics.DOI
25. Zhile Wang, Yu Guo, Wei Kang, Xin Chen (2025). A Novel Fault Feature Extraction Method for Planet-Bearing Based on Generalized Total Variation Model. IEEE Sensors Journal.DOI
26. Zhile Wang, Jiawei Fan, Yu Guo, Xing Chen, Wei Kang (2025). Research on fault feature extraction for planet-bearing using novel combination operator morphological filtering and stochastic resonance. Journal of Sound and Vibration.DOI
27. Jiawei Fan, Yu Guo, Xingchao Yin (2025). Instantaneous Angular Speed-Based Fault Detection for Planet and Cycloidal Gears in Rotary Vector Reducers. IEEE Transactions on Instrumentation and Measurement.DOI
28. Xiangshi Yin, Yu Guo, Jiawei Fan, H. Wang (2025). Cycloidal Gear Faults’ Detection of Industrial Robot Joint Based on IAS Signal Under Operating. IEEE Transactions on Instrumentation and Measurement.DOI
29. Xin Chen, Yu Guo, Chao Li, Tao Liu, Zhile Wang, Wei Kang (2025). A Novel Adaptive Multiperiod Differential Means for Rotating Machinery Condition Monitoring With Optical Encoder Signal Under Low- and Variable-Speed Conditions. IEEE Transactions on Instrumentation and Measurement.DOI
30. Kun He, Wei Kang, Yu Guo, M. D. Zhou, Jiawei Fan, Xin Chen (2025). Second-Order Cyclostationary Signal Extraction Method With Combined MOMEDA and Multiband Information Enhancement. IEEE Transactions on Instrumentation and Measurement.DOI
31. Zhile Wang, Xiaoli Yu, Yu Guo, Wei Kang, Xin Chen (2025). Total Variational Model of Structure Tensor Based on Partial Differential Equation and Its Application in Planet-Bearing Fault Diagnosis. IEEE Transactions on Instrumentation and Measurement.DOI
32. 陈鑫，郭瑜，徐万通，樊家伟，杨新敏（2024）. 基于自适应多周期微分均值的轴承故障诊断. 《振动、测试与诊断》.
33. 高军芳，刘畅，郭瑜（2024）. 机械工程测试技术创新实验改革与探索. 《实验室研究与探索》.DOI
34. Jing-Jing Zhao, Hai-Bin Zhao, Yu Guo, Qing Li, Xin Chen (2024). Enhanced Interfacial Bonding Strength of Hot-Pressed Titanium Alloy/CFRTP Joint Via Laser Ablation and Interfacial Adhesive. Composites Communications.DOI
35. Yu Guo, Hai-Bin Zhao, Cun-Sheng Zhang, Guo-Qun Zhao (2024). Super high flux oil/water separation and efficient separation of water-in-oil emulsions by a versatile superhydrophobic multi-walled carbon nanotubes coating. Separation and Purification Technology.DOI
36. Yu Guo, Hai-Bin Zhao (2024). Femtosecond laser processed superhydrophobic surface. Journal of Manufacturing Processes.DOI
37. Yu Guo, Hai-Bin Zhao, C. Ai, Jing-Jing Zhao, Hao Su, Ji Chen, Guo-Qun Zhao (2024). Parameter optimization of friction stir spot welded Al 6061 and CFRTP PA6 with surface treatment and interfacial adhesion. Thin-walled structures.DOI
38. Yu Guo, Fan Zhang, Hai-Bin Zhao, Qing Li, Xin Chen, Jing-Jing Zhao (2024). Femtosecond laser processing of steel template for mass production of superhydrophobic polyethylene film. Optics & Laser Technology.DOI
39. Yu Guo, Hai-Bin Zhao, Cun-Sheng Zhang, Guo-Qun Zhao (2024). Super photothermal/electrothermal response and anti-icing/deicing capability of superhydrophobic multi-walled carbon nanotubes/epoxy coating. Chemical Engineering Journal.DOI
40. Lin Wang, Yu Guo, Yankang Shen (2024). Angular dynamic model for fault detection of the outer raceway of the RV reducer main bearings under low-speed conditions. Measurement Science and Technology.DOI
41. Maolin Luo, Yu Guo, Zuqiang Su, Hugo André, Zhi Chao Tang, Chen Zhou, Chao Li (2024). Defect quantification evaluation of a rolling element bearing based on physical modelling and instantaneous vibration energy investigation. Journal of Sound and Vibration.DOI
42. Yankang Shen, Yu Guo, Jiawei Fan, Xianliang Wu (2024). Fault detection of RV reducer cycloidal gear under robot working conditions based on optimization improved envelope spectrum sideband energy ratio. Measurement Science and Technology.DOI
43. Yankang Shen, Yu Guo, Jiawei Fan (2024). Robot Joint Cycloidal Gear Tooth Fault Detection in Robot Working Conditions Based on Piecewise Mean Difference. IEEE Sensors Journal.DOI
44. Xingchao Yin, Yu Guo, Jing Na, Jiawei Fan (2024). Incremental Optical Encoder Error Modeling and Compensation for Accurate Speed Acquisition in Non-Stationary Conditions. IEEE Transactions on Industrial Electronics.DOI
45. Yu Guo, Xingchao Yin (2024). Cycloid Gear Tooth Fault Detection of Industrial Robot Joints Based on IAS Signal. IEEE International Instrumentation and Measurement Technology Conference.DOI
46. Jianhua Yang, Zhile Wang, Yu Guo, Tao Gong, Zhen Shan (2024). A Novel Noise-Aided Fault Feature Extraction Using Stochastic Resonance in a Nonlinear System and Its Application. IEEE Sensors Journal.DOI
47. Jiawei Fan, Yu Guo, Jing Na, Xingchao Yin (2024). Gear Tooth Fault Detection in Servo Motor Transmission Chain Using the Built-In Encoder of Servo Motors. IEEE Transactions on Instrumentation and Measurement.DOI
48. Xin Chen, Yu Guo, Chao Li, Wei Kang (2024). Optical Encoder-Based Feature Extract of Faulty Rolling Element Bearing Under Variable-Speed Conditions. IEEE Transactions on Instrumentation and Measurement.DOI
49. 尹兴超，郭瑜，樊家伟，邹翔，陈鑫（2023）. 增量式光学编码器IAS信号误差建模及补偿. 《仪器仪表学报》.DOI
50. Qing Li, Yajun Sun, Hai-Bin Zhao, Fan Zhang, Yu Guo, Xin Chen, Guo-Qun Zhao (2023). Structure and properties of the acellular porcine cornea irradiated with 60 Co-γ and electron beam and its histocompatibility. Journal of Biomedical Materials Research. Part A.DOI
51. Xinmin Yang, Yu Guo, Hongwei Wang (2023). Encoder Signal Analysis and its Application in Gear Fault Detection. IEEE Transactions on Instrumentation and Measurement.DOI
52. Y. Yan, Yu Guo, Xiaoqin Liu, Jing Na (2023). Fault feature detection of planet gear in multi-stage planetary gearbox based on angle compensation synchronous averaging. Journal of Vibration and Control.DOI
53. Maolin Luo, Hugo André, Yu Guo, Yunhao Peng (2023). Analysis of contact behaviours and vibrations in a defective deep groove ball bearing. Journal of Sound and Vibration.DOI
54. Y. Yan, Yu Guo, Xiaoqin Liu (2023). Tooth root crack detection of planet gear in industrial robot RV reducer. Measurement and Control.DOI
55. Xinmin Yang, Yu Guo, Jiawei Fan (2023). Application of Demodulation Frequency Band Optimization in Compound Fault Detection of Rolling Element Bearing Based on Fast Spectrum Correlation. IEEE Sensors Journal.DOI
56. Zhile Wang, Jianhua Yang, Yu Guo, Tao Gong, Zhen Shan (2023). Nonstationary feature extraction based on stochastic resonance and its application in rolling bearing fault diagnosis under strong noise background. Review of Scientific Instruments.DOI
57. Xin Chen, Yu Guo, Jing Na (2022). Instantaneous-Angular-Speed-Based Synchronous Averaging Tool for Bearing Outer Race Fault Diagnosis. IEEE Transactions on Industrial Electronics.DOI
58. Zhile Wang, Jianhua Yang, Yu Guo, Tao Gong, Zhen Shan (2022). Positive role of bifurcation on stochastic resonance and its application in fault diagnosis under time-varying rotational speed. Journal of Sound and Vibration.DOI
59. Zhile Wang, Jianhua Yang, Yu Guo (2022). Unknown fault feature extraction of rolling bearings under variable speed conditions based on statistical complexity measures. Mechanical Systems and Signal Processing.DOI
60. 郭瑜，黄家海，赵斌，王文庆，刘畅（2021）. 塔式摩擦提升机的动力学建模及其纵向振动分析. 《机电工程》.
61. 王文庆，黄家海，姬帅旭，郭瑜（2021）. 基于三通比例减压阀的恒减速制动性能研究. 《机电工程》.
62. 代绍铖，郭瑜，陈鑫，林云（2021）. 基于谱相干滤波冲击增强的轴承故障诊断. 《电子测量与仪器学报》.DOI
63. Jianxiang Hua, Yu Guo (2021). Fault Detection Based on Improved Cross-correlation Order Spectrum of Sun Gear Instantaneous Angular Speed Signal. International Conference on Sensing, Measurement & Data Analytics in the era of Artificial Intelligence (ICSMD).DOI
64. Xin Chen, Yu Guo, Jing Na (2021). Proportional Selection Scheme: A Frequency Band Division Tool for Rolling Element Bearing Diagnostics. IEEE Transactions on Industrial Electronics.DOI
65. Maolin Luo, Yu Guo, Hugo André, Xing Wu, Jing Na (2021). Dynamic modeling and quantitative diagnosis for dual-impulse behavior of rolling element bearing with a spall on inner race. Mechanical Systems and Signal Processing.DOI
66. 高佳豪，郭瑜，伍星（2020）. 基于SANC和一维卷积神经网络的齿轮箱轴承故障诊断. 《振动与冲击》.DOI
67. Dan-Feng Wang, Yu Guo, Xing Wu, Jing Na, Grzegorz Litak (2020). Planetary-Gearbox Fault Classification by Convolutional Neural Network and Recurrence Plot. Applied Sciences.DOI
68. 徐雨露，倪屹，余涛，郭瑜（2019）. 基于拍频解调的光纤光栅位移传感器. 《激光与光电子学进展》.
69. 余涛，郭瑜，倪屹（2019）. 基片式多纵模拍频光纤激光位移传感器. 《红外与激光工程》.
70. Bartłomiej Ambrożkiewicz, Nicolas Meier, Yu Guo, Grzegorz Litak, Anthimos Georgiadis (2019). Recurrence-based diagnostics of rotary systems. IOP Conference Series Materials Science and Engineering.DOI
71. Yu Guo, Zhen Liu, Xing Wu, Yinxin Yu (2019). Experimental investigation of sensor mounting positions for localized faults detection of epicyclic gear sets. HAL (Le Centre pour la Communication Scientifique Directe).
72. Yu Guo, Lei Zhao, Xing Wu, Jing Na (2019). Vibration separation technique based localized tooth fault detection of planetary gear sets: A tutorial. Mechanical Systems and Signal Processing.DOI
73. Maolin Luo, Yu Guo, Xing Wu, Jing Na (2019). An analytical model for estimating spalled zone size of rolling element bearing based on dual-impulse time separation. Journal of Sound and Vibration.DOI
74. Yu Guo, Lei Zhao, Xing Wu, Jing Na (2019). Tooth Root Crack Detection of Planet and Sun Gears Based on Resonance Demodulation and Vibration Separation. IEEE Transactions on Instrumentation and Measurement.DOI
75. Chao Li, Yu Guo, Zhengming Xiao, Xing Wu, Tao Liu (2019). Fault feature extraction of planet gear tooth crack based on impulsive feature enhancement by MOMEDA. Journal of Intelligent & Fuzzy Systems.DOI
76. 郭瑜，朱星盈，倪屹，王娟，李岱林（2018）. 三维光纤布拉格光栅应变传感器的温度补偿技术. 《激光与光电子学进展》.
77. 朱星盈，刘化利，倪屹，郭瑜（2018）. 新型双环减敏式光纤布拉格光栅应变传感器. 《激光与光电子学进展》.
78. 朱星盈，倪屹，郭瑜，刘化利，李岱林（2018）. 自旋量程可调式金属化FBG温度传感器设计. 《传感器与微系统》.
79. Yi Luo, Yu Guo (2018). Envelope Analysis Scheme for Multi-Faults Vibration of Gearbox Based on Self-Adaptive Noise Cancellation. Prognostics and System Health Management Conference.DOI
80. Danfeng Wang, Yu Guo, Yong Long (2018). Detection of Planetary Carrier Cracks Using the Time Domain Synchronous Averaging. Prognostics and System Health Management Conference.DOI
81. Yong Long, Yu Guo, Lei Zhao (2018). Planet gear fault diagnosis based on HVD and envelope time-domain synchronous average. Chinese Control and Decision Conference (CCDC).DOI
82. Yu Guo, Lei Zhao, Xing Wu, Jing Na (2018). Localized faults detection of planetary gear sets based on resonance demodulation and vibration separation. IEEE International Instrumentation and Measurement Technology Conference.DOI
83. Maolin Luo, Yu Guo (2017). Dynamic mechanism modeling for dual-impulse behavior excited by a spall on outer race of ball bearing. Vibroengineering PROCEDIA.DOI
84. Guanbin Gao, Guoqing Sun, Jing Na, Yu Guo, Xing Fang Wu (2017). Structural parameter identification for 6 DOF industrial robots. Mechanical Systems and Signal Processing.DOI
85. Zhiqi Liu, Yu Guo (2017). A neural network approach for prediction of bearing performance degradation tendency. International Conference on Modelling, Identification and Control.DOI
86. Lei Zhao, Yu Guo (2017). Time domain synchronous averaging based on accurate alignment reference signal. International Conference on Modelling, Identification and Control.DOI
87. Lei Zhao, Yu Guo, Xing Wu (2017). Investigation on synchronous averaging for fault feature extraction of sun gear in a planetary gearbox. International Conference on Applied System Innovation.DOI
88. Zeguang Yi, Nan Pan, Yi Liu, Yu Guo (2017). Study of laser displacement measurement data abnormal correction algorithm. Engineering Computations.DOI
89. Zhile Wang, Yu Guo, Xing Wu, Jing Na (2017). Localized fault detection of sun gears based on windowed synchronous averaging in the angular domain. Advances in Mechanical Engineering.DOI
90. Tao Liu, Xing Wu, Yu Guo, Chang Liu (2016). BEARING PERFORMANCE DEGRADATION ASSESSMENT BY ORTHOGONAL LOCAL PRESERVING PROJECTION AND CONTINUOUS HIDDEN MARKOV MODEL. Transactions of the Canadian Society for Mechanical Engineering.DOI
91. Guanbin Gao, Jing Na, Xing Fang Wu, Yu Guo (2016). A SELF-CALIBRATION METHOD FOR ARTICULATED ARM COORDINATE MEASURING MACHINES. Transactions of the Canadian Society for Mechanical Engineering.DOI
92. Nguyen Le Thai, Xing Fang Wu, Jing Na, Yu Guo, Nguyen Thi Trung Tin, Phan Xuan Le (2016). Adaptive variable step-size neural controller for nonlinear feedback active noise control systems. Applied Acoustics.DOI
93. Yu Guo (2016). Gear Fault Diagnosis Based on Narrowband Demodulation with Frequency Shift and Spectrum Edit. DOAJ (DOAJ: Directory of Open Access Journals).
94. Dong-tai He, Yu Guo (2016). Finite element analysis of humanoid robot arm. International Conference on Ubiquitous Robots and Ambient Intelligence.DOI
95. Guanbin Gao, Huaishan Zhang, Xing Fang Wu, Yu Guo (2016). Structural Parameter Identification of Articulated Arm Coordinate Measuring Machines. Mathematical Problems in Engineering.DOI
96. Nguyen Le Thai, Xing Fang Wu, Jing Na, Yu Guo, Nguyen Thi Trung Tin, Phan Xuan Le (2016). Adaptive active noise control with online secondary path modelling and variable step-size learning. International Journal of Modelling Identification and Control.DOI
97. 郭瑜（2015）. 机电一体化技术在工程机械中的应用. 《现代工业经济和信息化》.
98. 向诚，张云怀，王东红，郭瑜（2015）. 基于导师团队的专业学位研究生集体培养模式探索. 《研究生教育研究》, No. 1.下载原文
99. Yingbo Huang, Jing Na, Guanbin Gao, Xing Fang Wu, Yu Guo (2015). Robust adaptive control for vehicle active suspension systems with uncertain dynamics. Chinese Control Conference (CCC).DOI
100. Yu Guo, Xing Fang Wu, Jing Na, Rong‐Fong Fung (2015). Envelope synchronous average scheme for multi-axis gear faults detection. Journal of Sound and Vibration.DOI
101. Nan Pan, Xing Wu, Yu Guo (2015). BEARING COMPOUND FAULT ACOUSTIC DIAGNOSIS BASED ON IMPROVED BLIND DECONVOLUTION ALGORITHM. Transactions of the Canadian Society for Mechanical Engineering.DOI
102. Jin-long Guo, Jianbin Luo, Yu Guo, Xiaoyong Pan, Xin Fang, Xing Wu (2015). Noise test and control for household refrigerator compressor. IEEE International Conference on Information and Automation (ICIA).DOI
103. Qiannan Liu, Yu Guo (2015). Dynamic model of faulty rolling element bearing on double impact phenomenon. IEEE International Conference on Information and Automation (ICIA).DOI
104. Shou-Bao Sun, Yu Guo, Yan Gao (2015). Experimental investigation on double impulses phenomenon of outer race spalled rolling element bearings based on acoustic emission signals. IEEE International Conference on Information and Automation (ICIA).DOI
105. Wei Kang, Yu Guo, Yan Gao (2015). Intrinsic mode function determination of faulty rolling element bearing based on kurtosis. IEEE International Conference on Information and Automation (ICIA).DOI
106. Yongfeng Lv, Jing Na, Qinmin Yang, Xing Fang Wu, Yu Guo (2015). Online adaptive optimal control for continuous-time nonlinear systems with completely unknown dynamics. International Journal of Control.DOI
107. Yu Guo, Xing Wu, Jing Na, Rong‐Fong Fung (2015). Incipient Faults Identification in Gearbox by Combining Kurtogram and Independent Component Analysis. Applied Mechanics and Materials.DOI
108. Juan Yang, Jing Na, Yu Guo, Xing Fang Wu (2015). Adaptive estimation of road gradient and vehicle parameters for vehicular systems. IET Control Theory and Applications.DOI
109. Jing Na, Juan Yang, Xing Fang Wu, Yu Guo (2015). Robust adaptive parameter estimation of sinusoidal signals. Automatica.DOI
110. 向诚，柴毅，王东红，张云怀，刘京诚，黄宗明，郭瑜（2014）. 紧贴行业需求,校企协同培养控制工程领域高层次应用型人才. 《学位与研究生教育》, No. 4.下载原文
111. Jing Na, Juan Yang, Xuemei Ren, Yu Guo (2014). Robust adaptive estimation of nonlinear system with time‐varying parameters. International Journal of Adaptive Control and Signal Processing.DOI
112. Yingbo Huang, Jing Na, Xing Fang Wu, Xiaoqin Liu, Yu Guo (2014). Adaptive control of nonlinear uncertain active suspension systems with prescribed performance. ISA Transactions.DOI
113. Jing Na, Yongfeng Lv, Xing Fang Wu, Yu Guo, Qiang Chen (2014). Approximate optimal tracking control for continuous-time unknown nonlinear systems. Chinese Control Conference (CCC).DOI
114. Le Thai Nguyen, Xing Fang Wu, Jing Na, Yu Guo, Thi Trung Tin Nguyen (2014). Adaptive multi-frequency feedforward active noise control systems. Chinese Control Conference (CCC).DOI
115. Juan Yang, Jing Na, Xing Fang Wu, Yu Guo (2014). Adaptive parameter estimation with guaranteed prescribed performance.DOI
116. Shi Chao Dai, Yan Hong Gao, Yu Guo (2014). Rolling Element Bearing Diagnosis Based on Signal Reconstruction from Edited Cepstrum. Advanced materials research.DOI
117. Yu Guo, Jing Na, Bin Li, Rong‐Fong Fung (2014). Envelope extraction based dimension reduction for independent component analysis in fault diagnosis of rolling element bearing. Journal of Sound and Vibration.DOI
118. You Bing Kong, Yu Guo, Xing Wu (2014). Double Impulses Extraction of Faulty Rolling Element Bearing Based on EEMD and Complex Morlet Wavelet. Advanced materials research.DOI
119. Zong Tao Li, Yan Gao, Xiang Zhou, Yu Guo (2014). Feature Extraction of Faulty Rolling Element Bearing Based on Time Synchronous Average and Cepstrum Edit. Advanced materials research.DOI
120. Jin-Long Guo, Yu Guo, Shou-Bao Sun, Yan Gao (2014). Simulation Study of Phase Demodulation in Resonance Band for Gear Tooth Cracking Fault Detection. Advances in physics research/Advances in Physics Research.DOI
121. 吴涛，郭瑜（2013）. MATLAB仿真技术在《机械工程控制基础》教学中的应用. Proceedings of 2013 International Conference on Education and Teaching(ICET 2013) Volume 23.
122. Jing Na, Xuemei Ren, Ramon Costa‐Castelló, Yu Guo (2013). Repetitive control of servo systems with time delays. Robotics and Autonomous Systems.DOI
123. Jing Na, Juan Yang, Xuemei Ren, Yu Guo (2013). Adaptive Online Estimation of Time-varying Parameter Nonlinear Systems. 《第三十二届中国控制会议论文集（C卷）》.
124. Yun Li, Yu Guo, Jun Feng Guo, Xian Jun Yu, Yan Xue Liu (2013). Gear Fault Identification by Envelope Order Analysis Based on ADAMS Simulation. Applied Mechanics and Materials.DOI
125. Zhizhou Jia, Yu Guo, Yajun Fan (2013). Low-cost micro condition monitoring system based on LabVIEW and SQL server. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
126. Zong Tao Li, Yu Guo, Heng Ye (2013). Modification of Autocorrelation Analysis Algorithm and its Application. Applied Mechanics and Materials.DOI
127. Jing Na, Qiang Chen, Xuemei Ren, Yu Guo (2013). Adaptive Prescribed Performance Motion Control of Servo Mechanisms with Friction Compensation. IEEE Transactions on Industrial Electronics.DOI
128. Xian Jun Yu, Yu Guo, Jun Feng Guo, Yun Li (2013). Time-Frequency Analysis System of Rolling Element Bearing Based on Virtual Instrument. Applied Mechanics and Materials.DOI
129. Jing Na, Juan Yang, Xing Fang Wu, Yu Guo (2013). Adaptive Parameter Identification of Sinusoidal Signals. IFAC Proceedings Volumes.DOI
130. Heng Ye, Yu Guo, Zhi Dong Wang (2013). Development of Health Monitoring Instrument Based on LabVIEW. Advanced materials research.DOI
131. Zhi Dong Wang, Yu Guo (2013). Development of Health Monitor Instrument Based on LabVIEW. Advanced materials research.DOI
132. Zheng Ming Xiao, Zhi Hong Yin, Yu Guo (2012). Dynamic Characteristics of Planetary Gears Train of Semi-Direct Drive Wind Turbine. Applied Mechanics and Materials.DOI
133. Jing Na, Xuemei Ren, Ramon Costa‐Castelló, Robert Griñó, Yu Guo (2012). Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics). Lecture notes in computer science.
134. Yu Guo, Ting‐Wei Liu, Jing Na, Rong‐Fong Fung (2012). Envelope order tracking for fault detection in rolling element bearings. Journal of Sound and Vibration.DOI
135. Chuan Hui Wu, Yu Guo, Ya Jun Fan (2012). Gear Vibration Monitoring System Based on Virtual Instruments. Applied Mechanics and Materials.DOI
136. Yu Liang, Yu Guo, Chuan Hui Wu, Yan Gao (2012). Envelope Analysis Based on the Combination of Morlet Wavelet and Kurtogram. Advanced materials research.DOI
137. Chuan Hui Wu, Yu Guo, Yu Liang, Hua Wen Zheng (2012). Diagnosis of Incipient Failure of Gearbox Based on Signal Enhancement Technologies. Advanced materials research.DOI
138. Chuan Hui Wu, Yan Gao, Yu Guo (2012). Study on Remote Condition Monitoring and Fault Diagnosis System for Rotating Machinery Based on LabVIEW. Advanced materials research.DOI
139. Jing Na, Xuemei Ren, Ramon Costa‐Castelló, Robert Griñó, Yu Guo (2012). Repetitive Control for Systems with Time-Delays and Application to Robotic Servo Motor. Lecture notes in computer science.DOI
140. Bin Li, Yu Guo, Ting Wei Liu, Yan Gao (2012). Fault Diagnosis of Gearbox Based on ICA and Envelope Analysis. Advanced materials research.DOI
141. 贾智州，郭瑜，范亚军（2011）. 低成本微型旋转机械状态监测系统开发. 《机械设计与制造工程》.
142. Jing Na, Xuemei Ren, Cong Shang, Yu Guo (2011). Adaptive neural network predictive control for nonlinear pure feedback systems with input delay. Journal of Process Control.DOI
143. Bin Li, Yu Guo, Yan Chun Ding, Ting Wei Liu, Jing Na, Yan Gao (2011). Vibration Analysis of Rotor System by Combined Adaptive Time-Frequency Analysis and Independent Component Analysis. Key engineering materials.DOI
144. Ya Jun Fan, Yu Guo, Chuan Hui Wu (2011). Low-Cost Condition Monitoring System of Rotating Machinery Based on LabVIEW. Key engineering materials.DOI
145. Ting Wei Liu, Yu Guo, Bin Li, Yan Chun Ding, Hua Wen Zheng (2011). Envelope Analysis of Gear Faults Based on Spectral Kurtosis. Key engineering materials.DOI
146. Tao Wu, Yilin Chi, Yu Guo, H.B. Zheng (2010). Research and practice of mechanic engineering control foundation remote experiment education network based on LabVIEW.DOI
147. Tao Wu, Yilin Chi, Yu Guo, Ping Li, Hai-Yang Shen, Bin Gao (2010). Application of DSP in Design of the Control System of the Automatic Trace Flying Saw Machine. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
148. Yu Guo, Kok Kiong Tan (2010). High efficient crossing-order decoupling in Vold–Kalman filtering order tracking based on independent component analysis. Mechanical Systems and Signal Processing.DOI
149. 李阳，郭瑜，毕新强，郑华文（2009）. 连续小波变换的滚动轴承故障诊断. 《机械与电子》.
150. 罗自荣，尚建忠，郭瑜，解旭辉（2009）. 螺旋推进管道机器人的驱动头与保持架调节机构设计. 《机械设计》.
151. Tao Wu, Yilin Chi, Yu Guo, Chao Xu (2009). Simulation of FOC Vector Control of Induction Motor Based on LabVIEW. International Conference on Information Engineering and Computer Science.DOI
152. Yu Guo, Kok Kiong Tan (2009). Order-crossing removal in Gabor order tracking by independent component analysis. Journal of Sound and Vibration.DOI
153. Yu Guo, Kok Kiong Tan, Sunan Huang, Yi Zhang (2008). Noise removal in Vold-Kalman order tracking based on independent component analysis. IEEE International Conference on Automation and Logistics (ICAL).DOI
154. Yu Guo, Yilin Chi, Huawen Zheng (2008). Noise reduction in computed order tracking based on FastICA. IEEE/ASME International Conference on Advanced Intelligent Mechatronics.DOI
155. 纪跃波，郭瑜（2007）. 阶比分析技术的发展应用与展望. 《现代制造工程》.DOI
156. 郭瑜，余得水，白文博（2006）. X5040A铣床数控技术改造. 《第十一届全国自动化应用技术学术交流会》.
157. 郭瑜，尚建忠，罗自荣，解旭辉（2006）. 微小型螺旋驱动管道机器人建模与分析. 《机械制造》.
158. Yan Hong Gao, Yu Guo, Y L Chi, Shize Qin (2006). Order Tracking Based on Robust Peak Search Instantaneous Frequency Estimation. Journal of Physics Conference Series.DOI
159. Yu Guo, Y L Chi, Ya Huang, Shize Qin (2006). Robust IFE Based Order Analysis of Rotating Machinery in Virtual Instrument. Journal of Physics Conference Series.DOI
160. Shize Qin, Yu Guo (2005). Order Tracking Filtering for Rotating Machinery Diagnosis Based on Zero Phase Distortion Digital Filtering. Key engineering materials.DOI
161. 杨炯明，秦树人，季忠，郭瑜（2004）. 旋转机械虚拟式振动信号特征分析仪. 《中国机械工程》.
162. 郭瑜，秦树人，汤宝平，纪跃波（2003）. 基于瞬时频率估计的旋转机械阶比跟踪. 《机械工程学报》.
163. 梁玉前，秦树人，郭瑜（2003）. 旋转机械升降速信号的瞬时频率估计. 《机械工程学报》.
164. 郭瑜，罗德扬（1997）. 数字信号处理系统的开发研究. 《昆明理工大学学报(自然科学版)》.
165. 郭瑜（1995）. 集中润滑系统在大型烧结工程上的应用. 《机械工程与自动化》.

书籍章节

1. Bartłomiej Ambrożkiewicz, Yu Guo, Grzegorz Litak, Piotr Wolszczak (2019). Dynamical Response of a Planetary Gear System with Faults Using Recurrence Statistics. Springer proceedings in physics.DOI