汤勇

2026

冷媒直冷板沟槽-丝网复合结构制造及性能研究

《机械工程学报》

2026

Capillary performance of ultrathin flexible microgroove wicks fabricated by two-step micro hot-pressing

Heat and Mass Transfer

DOI

2026

Fabrication and performance of aluminum heat sink with graded laminated composite wick for communication base stations

Applied Thermal Engineering

DOI

2026

Fabrication and performance characterization of a phase-change thermal diode using scaly-finned fibers as the wick

Energy Conversion and Management

DOI

2026

Fabrication of microchannel heat sinks using additive manufacturing: A review

Renewable & Sustainable Energy Reviews

DOI

2026

Fabrication and capillary performance of short cutting-fiber wick structure for phase-change heat transfer devices

Applied Thermal Engineering

DOI

2026

Advanced thermal management scheme enhancing heat dissipation of line-replaceable modules

Applied Thermal Engineering

DOI

2026

A novel flow-guided cold plate with enhanced thermal performance for battery direct refrigerant cooling

Applied Thermal Engineering

DOI

2026

Fabrication and capillary performance of laser-modified multiscale carbon felt wicks for ultra-thin flexible polymer heat pipes

Applied Thermal Engineering

DOI

2026

Fabrication and formation mechanism of polymer microgroove wicks by hot-pressing

Chinese Journal of Mechanical Engineering

DOI

2026

Thermal performance of a refrigerant direct-cooling plate with mesh wick structure for lithium-ion batteries

Applied Thermal Engineering

DOI

2026

A review of active cooling technologies for electronic thermal management

Renewable & Sustainable Energy Reviews

DOI

2026

Multi-attitude metal fin arrays via plowing extrusion-cutting

International Journal of Mechanical Sciences

DOI

2025

基于汽液复合通道的超薄均热板制造及性能研究

《电子机械工程》

DOI

2025

LED车灯模组温湿度加速老化试验及寿命预测研究

《电子机械工程》

DOI

2025

Fabrication and pool boiling performance of stepped microgroove wicks for ceramic vapor chambers

The Physics of Fluids

DOI

2025

Fabrication and boiling performance assessment of cutting fiber felt for phase-change heat transfer devices

International Communications in Heat and Mass Transfer

DOI

2025

Experimental and fractal analysis on wettability of rough structures

The Physics of Fluids

DOI

2025

Directional flow characteristics of droplets on superhydrophobic-superhydrophilic patterned microchannel surfaces

Surfaces and Interfaces

DOI

2025

Ultrathin flexible heat pipes with heat transfer performance and flexibility optimization for flexible electronic devices

Renewable & Sustainable Energy Reviews

DOI

2024

复合蒸汽通道柔性均热板设计及其传热性能研究

《电子机械工程》

2024

A review of fabrication and performance of heat pipes with grooved wick structure

Applied Thermal Engineering

DOI

2024

A review on the liquid cooling thermal management system of lithium-ion batteries

Applied Energy

DOI

2024

Hierarchical sintered porous surfaces with enhanced pool boiling heat transfer performance for high-power cooling applications

Applied Thermal Engineering

DOI

2024

Pool boiling heat transfer performance of micro-embossing molds for the fabrication of polymer wicks

The Physics of Fluids

DOI

2023

平板热管沟槽吸液芯结构刻蚀制造研究进展

《机械工程学报》

2022

超薄均热板的研究现状及发展趋势

《机械工程学报》

2021

Capillary wicking in double-scale composite microgroove wicks for copper-aluminum composite vapor chambers

International Communications in Heat and Mass Transfer

DOI

2021

Effect of stagger angle on capillary performance of microgroove structures with reentrant cavities

Science China Technological Sciences

DOI

2021

Challenges and recent progress in thermal management with heat pipes for lithium-ion power batteries in electric vehicles

Science China Technological Sciences

DOI

2021

Thermal performance enhancement of an ultra-thin flattened heat pipe with multiple wick structure

DOI

2021

Manufacturing of a 3D finned tube for enhanced boiling and condensation using rolling-cutting-extruding composite forming

The International Journal of Advanced Manufacturing Technology

DOI

2021

Experimental investigation on wettability and capillary performance of ultrasonic modified grooved aluminum wicks

DOI

2021

Wicking capability evaluation of multilayer composite micromesh wicks for ultrathin two-phase heat transfer devices

DOI

2020

Effect of inclination angle on the thermal performance of an ultrathin heat pipe with multi-scale wick structure

DOI

2020

Thermal performance enhancement of micro-grooved aluminum flat plate heat pipes applied in solar collectors

Renewable Energy

DOI

2020

Study on the Flow and Heat Transfer Characteristics of Sinusoidal Half-Corrugated Microchannels

Journal of thermophysics and heat transfer

DOI

2020

Experimental research on structure parameters of the ultra-thin flattened heat pipe

DOI

2020

Improvement on the heat dissipation of permanent magnet synchronous motor using heat pipe

Proceedings of the Institution of mechanical engineers. Part D, journal of automobile engineering

DOI

2020

Extraordinary boiling enhancement through micro-chimney effects in gradient porous micromeshes for high-power applications

DOI

2020

Experimental study of a large-area ultra-thin flat heat pipe for solar collectors under different cooling conditions

DOI

2020

Hierarchically 3D-textured copper surfaces with enhanced wicking properties for high-power cooling

DOI

2020

Pool boiling heat transfer of multi-scale composite copper powders fabricated by sintering-alloying-dealloying treatment

DOI

2020

Capillary performance characterization of porous sintered stainless steel powder wicks for stainless steel heat pipes

DOI

2020

Waterway design of an external rotor permanent magnet synchronous generator

DOI

2020

Pool boiling enhancement of novel interconnected microchannels with reentrant cavities for high-power electronics cooling

DOI

2020

Experimental and numerical investigation on a novel heat pipe based cooling strategy for permanent magnet synchronous motors

DOI

2020

Experimental investigation on the thermal characteristics of ultra-thin flattened heat pipes with bending angles

Applied Thermal Engineering

DOI

2019

激光加工平面型微超级电容器的研究进展与发展趋势

《机械工程学报》

2019

平板铝热管微沟槽吸液芯的制备及毛细性能研究

《机械工程学报》

2019

Experimental study on thermal performances of ultra-thin flattened heat pipes

International Journal of Heat and Mass Transfer

DOI

2019

Experimental study on the capillary performance of aluminum micro-grooved wicks with reentrant cavity array

International Journal of Heat and Mass Transfer

DOI

2019

Manufacturing and single-phase thermal performance of an arc-shaped inner finned tube for heat exchanger

Applied Thermal Engineering

DOI

2019

Experimental Investigation on the Thermal Performance of a Sintered Flexible Woven Heat Sink

IEEE Access

DOI

2019

Experimental investigation on a novel composite heat pipe with phase change materials coated on the adiabatic section

International Communications in Heat and Mass Transfer

DOI

2019

Experimental studies on the compound thermo-hydraulic characteristics in a 3D inner finned tube with porous copper fiber inserts

International Communications in Heat and Mass Transfer

DOI

2019

Novel Production and Performance of Aluminum-Based Ultrathin Flat Heat Pipes Based on Preforming and Multi-Tooth Plowing

IEEE Transactions on Components, Packaging, and Manufacturing Technology

DOI

2019

Improvement of ultrasonic heat transfer enhancement using acoustical focusing and resonance properties

International Communications in Heat and Mass Transfer

DOI

2019

Evaluation of capillary performance of a stainless steel fiber–powder composite wick for stainless steel heat pipe

Applied Thermal Engineering

DOI

2019

Compound thermal performance of an arc-shaped inner finned tube equipped with Y-branch inserts

Applied Thermal Engineering

DOI

2019

Applicability study of the potting material based thermal management strategy for permanent magnet synchronous motors

Applied Thermal Engineering

DOI

2019

Thermal management integrated with three-dimensional heat pipes for air-cooled permanent magnet synchronous motor

Applied Thermal Engineering

DOI

2019

Experimental evaluation of thermal performance in a circular tube with Y-branch insert

International Communications in Heat and Mass Transfer

DOI

2019

Experimental study on the thermal performance of a novel ultra-thin aluminum flat heat pipe

Renewable Energy

DOI

2019

Experimental investigation on thermal management performance of an integrated heat sink with a piezoelectric micropump

Applied Thermal Engineering

DOI

2018

微通道反应器合成高质量的无机钙钛矿量子点及其LED应用

《发光学报》

2018

Investigation on fabrication and capillary performance of multi-scale composite porous wick made by alloying-dealloying method

International Journal of Heat and Mass Transfer

DOI

2018

Investigation on critical heat flux of flow boiling in parallel microchannels with large aspect ratio: Experimental and theoretical analysis

International Journal of Heat and Mass Transfer

DOI

2018

Experimental investigation of the thermal performance of heat pipe with multi-heat source and double-end cooling

DOI

2018

Effects of heat flux, mass flux and channel width on flow boiling performance of porous interconnected microchannel nets

DOI

2018

An investigation on optimal external cooling condition for an ultra-thin loop thermosyphon-based thermal management system

Energy Conversion and Management

DOI

2018

Fabrication and capillary characterization of axially micro-grooved wicks for aluminium flat-plate heat pipes

DOI

2018

Flow boiling characteristics in microchannels with half-corrugated bottom plates

DOI

2018

Thermodynamic and experimental study on heat transfer mechanism of miniature loop heat pipe with water-copper nanofluid

DOI

2018

Effect of fabrication parameters on capillary pumping performance of multi-scale composite porous wicks for loop heat pipe

Applied Thermal Engineering

DOI

2018

Heat transfer characteristics of a novel closed-loop pulsating heat pipe with a check valve

Applied Thermal Engineering

DOI

2018

Review of applications and developments of ultra-thin micro heat pipes for electronic cooling

Applied Energy

DOI

2018

Experimental research of the critical geometric parameters on subcooled flow boiling in confined microchannels

DOI

2018

Various orientations research on thermal performance of novel multi-branch heat pipes with different sintered wicks

Energy Conversion and Management

DOI

2017

多孔气液分离强化传热结构单相流中传热性能

《工程热物理学报》

2017

A Multiscale Study of Film Thickness Dependent Femtosecond Laser Spallation and Ablation

DOI

2017

Effect of ZnO nanostructures on the optical properties of white light-emitting diodes.

Optics Express

DOI

2017

後セレン化したCu(In,Ga)Se_2薄膜に及ぼす表面改質Mo裏面接触の影響【Powered by NICT】

2017

Influence of electrochemical deposition parameters on capillary performance of a rectangular grooved wick with a porous layer

DOI

2017

Freeform illumination lens design combining energy and intensity mapping

DOI

2017

A Performance-testing Platform for a Conduction Micropump with an FR-4 Copper-clad Electrode Plate.

Journal of Visualized Experiments

DOI

2017

Influence of lens structure on the mechanical strength of high-power light emitting diodes

International Conference on Electronic Packaging Technology

DOI

2017

Study on Scattering and Absorption Properties of Quantum-Dot-Converted Elements for Light-Emitting Diodes Using Finite-Difference Time-Domain Method

Materials

DOI

2017

Experimental investigation of capillary force in a novel sintered copper mesh wick for ultra-thin heat pipes

DOI

2017

A kind of graded index parcel quantum dot diaphragm and preparation method thereof

2017

High-efficiency LED COB device combined diced V-shaped pattern and remote phosphor

DOI

2017

Thermo-hydraulic characteristics of laminar flow in a circular tube with porous metal cylinder inserts

DOI

2017

Effect of chips surface morphology on optical performance of remote and conformal phosphor-converted light-emitting diodes

International Conference on Electronic Packaging Technology

DOI

2017

Experimental Analysis and FEM Simulation of Antigravity Loop-Shaped Heat Pipe for Radio Remote Unit

IEEE Transactions on Components, Packaging, and Manufacturing Technology

DOI

2017

銅ナノチャネルに及ぼす液体アルゴン薄膜の爆発的沸騰の分子動力学シミュレーション【Powered by NICT】

2017

Flow boiling characteristics of micro-grooved channels with reentrant cavity array at different operational conditions

DOI

2017

プラズマ支援熱支援Se蒸気セレン化プロセスによるCu(In,Ga)Se2薄膜の成長と特性評価【Powered by NICT】

2017

Boundary layer redevelops with mesh cylinder inserts for heat transfer enhancement

DOI

2017

フラクタル微小粗さ表面モデルを用いた薄膜発光ダイオードの光学的性能に関する研究【Powered by NICT】

2017

エッチングプロセスと結合したプラズマ増強Se蒸気セレン化による均一なCu(In,Ga)Se2薄膜の作製【Powered by NICT】

2017

Pool boiling performance and bubble dynamics on microgrooved surfaces with reentrant cavities

DOI

2017

Numerical analysis on heat transfer of a complete anti-gravity loop-shaped heat pipe

DOI

2017

Effect of operational parameters on flow boiling heat transfer performance for porous interconnected microchannel nets

DOI

2017

Multiple orientations research on heat transfer capabilities of ultra-thin loop heat pipes with various channel configurations

DOI

2017

Fabrication of homogeneous CIGS thin film by plasma-enhanced Se vapor selenization coupled with etching process

DOI

2017

Influence of surface-modified Mo back contact on post-selenized Cu(In,Ga)Se2 thin films

DOI

2017

Effects of structural parameter on flow boiling performance of interconnected microchannel net

DOI

2017

Growth and characterization of CIGS thin films by plasma-assisted and thermal-assisted Se vapor selenization process

DOI

2017

Fabrication and capillary characterization of micro-grooved wicks with reentrant cavity array

DOI

2017

Thermal analysis of an LED module with a novelly assembled heat pipe heat sink

DOI

2017

Highly reflective nanofiber films based on electrospinning and their application on color uniformity and luminous efficacy improvement of white light-emitting diodes.

Optics Express

DOI

2017

Butterfly-inspired micro-concavity array film for color conversion efficiency improvement of quantum-dot-based light-emitting diodes.

Optics Letters

DOI

2017

Heat transfer characteristics of flow boiling in horizontal ultra-shallow microchannels

DOI

2017

An experimental investigation on effect of channel configuration in ultra-shallow micro multi-channels flow boiling: Heat transfer enhancement and visualized presentation

DOI

2017

Multichip LED Modules With V-Groove Surfaces for Light Extraction Efficiency Enhancements Considering Roughness Scattering

IEEE Transactions on Electron Devices

DOI

2017

Enhanced capillary performance in axially grooved aluminium wicks by alkaline corrosion treatment

DOI

2017

Experimental investigation on a novel multi-branch heat pipe for multi-heat source electronics

DOI

2017

Heat Conduction in Si/Ge Superlattices: A Molecular Dynamics Study

DOI

2017

Coupled effect of pre-alloying treatment and plasma-assisted Se vapor selenization process in Cu(In, Ga)Se 2 thin film

DOI

2017

Color Uniformity Enhancement for WLEDs Using Inverted Dispensing Method

IEEE Photonics Technology Letters

DOI

2017

Molecular Dynamics Investigation of Phase Change Induced by Ultrafast Laser Irradiation

DOI

2017

Experimental investigation on the thermal performance of a light emitting diode headlamp with a flexible woven heat sink

DOI

2017

Flow characteristics and heat transfer performance of half-corrugated microchannels

DOI

2017

Molecular dynamics simulation on explosive boiling of liquid argon film on copper nanochannels

DOI

2017

Thermal management of high-power LEDs based on integrated heat sink with vapor chamber

DOI

2017

Investigation on the performance of Mo2N thin film as barrier layer against Fe in the flexible Cu(In,Ga)Se2 solar cells on stainless steel substrates

DOI

2017

Study on the optical performance of thin-film light-emitting diodes using fractal micro-roughness surface model

DOI

2017

Preparation of novel copper-powder-sintered frame/paraffin form-stable phase change materials with extremely high thermal conductivity

DOI

2017

ACU improvement of CCT-tunable LED device by electrospun nanofiber film

International Conference on Electronic Packaging Technology

DOI

2017

ステンレス鋼基板上へのフレキシブルCu(In,Ga)Se_2太陽電池におけるFeに対する障壁層としてMo_2N薄膜の性能に関する調査【Powered by NICT】

2017

Characterization and performance of Cu( In, Ga)Se-2 thin films incorporating low-temperature pre-annealing process

DOI

2016

气液分离强化传热多孔结构毛细上升特征

《化工学报》

2016

电-热应力对GaN基白光LED可靠性的影响

《发光学报》

2016

Improvement in optical performance and color uniformity by optimizing the remote phosphor caps geometry for chip-on-board light emitting diodes

DOI

2016

Investigations on the Condensation Heat Transfer Performance of Stainless Steel Edge-Shaped Finned Tubes

DOI

2016

A comparative study of flow boiling performance in the interconnected microchannel net and rectangular microchannels

DOI

2016

Thermal characteristic of a tube fitted with porous media inserts in the single phase flow

DOI

2016

LiBr溶液中の異なる構造管の超音波熱伝達促進【Powered by NICT】

2016

Color uniformity enhancement for COB WLEDs using a remote phosphor film with two freeform surfaces.

Optics Express

DOI

2016

Angular color uniformity enhancement of white light-emitting diodes by remote micro-patterned phosphor film

DOI

2016

Experimental investigation on the thermal performance of a heat sink filled with porous metal fiber sintered felt/paraffin composite phase change material

DOI

2016

異なる入口サブクーリングでの相互接続されたマイクロチャネル網における増強された流れ沸騰【Powered by NICT】

2016

Pool boiling heat transfer enhancement by porous interconnected microchannel nets at different liquid subcooling

DOI

2016

高出力LEDの熱的性能と抗熱ショック容量に及ぼすPCM HPヒートシンクの実験的研究【Powered by NICT】

2016

Pool boiling heat transfer of porous structures with reentrant cavities

DOI

2016

CCT-tunable LED device with excellent ACU by using micro-structure array film.

Optics Express

DOI

2016

Experiment research on the effect of the evaporator’s configuration design of an innovative ultra-thin looped heat pipe

DOI

2016

Visualization research on confined bubble growth feature and heat transfer characteristic in ultra-shallow micro channel

DOI

2016

A novel in-situ nanostructure forming route and its application in pool-boiling enhancement

DOI

2016

Thermal characteristic of a laminar flow through a circular tube fitted with wire-net cylinder inserts

DOI

2016

The multi-functional stack design of a molybdenum back contact prepared by pulsed DC magnetron sputtering

DOI

2016

Influence of chamber dimensions on the performance of a conduction micropump

DOI

2016

Influence of ultrasound on heat transfer of copper tubes with different surface characteristics in sub-cooled boiling

DOI

2016

Influence of a sintered central column on the thermal hydraulic performance of a vapor chamber: A numerical analysis

DOI

2016

Effect of powder size on capillary and two-phase heat transfer performance for porous interconnected microchannel nets as enhanced wick for two-phase heat transfer devices

DOI

2016

ACU Optimization of pcLEDs by Combining the Pulsed Spray and Feedback Method

Journal of Display Technology

DOI

2016

Heat transfer and pressure drop characteristics in a circular tube with mesh cylinder inserts

DOI

2016

Mass transfer enhancement for LiBr solution using ultrasonic wave

DOI

2016

A numerical study on thermal-hydraulic characteristics of turbulent flow through a circular tube fitted with pipe inserts

DOI

2016

Energy feedback freeform lenses for uniform illumination of extended light source LEDs.

Applied Optics

DOI

2016

2相熱伝達装置のための強化されたウィックとしての多孔性相互接続マイクロチャネルネットのためのキャピラリー及び2相熱伝達性能に及ぼす粉末粒度の影響【Powered by NICT】

2016

Ultrasonic heat transfer enhancement on different structural tubes in LiBr solution

DOI

2016

Enhanced flow boiling in an interconnected microchannel net at different inlet subcooling

DOI

2016

Effect of structural parameters on pool boiling heat transfer for porous interconnected microchannel nets

DOI

2016

Experimental investigation of a PCM-HP heat sink on its thermal performance and anti-thermal-shock capacity for high-power LEDs

DOI

2016

Heat transfer system driven by piezoelectricity and applied to self-priming liquid heat exchanger and heat transfer method thereof

2015

Failure-mechanism analysis for vertical high-power LEDs under external pressure

Microelectronics and reliability

DOI

2015

Effect of working fluid on heat transfer performance of the anti-gravity loop-shaped heat pipe

DOI

2015

Improving LED CCT uniformity using micropatterned films optimized by combining ray tracing and FDTD methods.

Optics Express

DOI

2015

Experimental investigation on the sintered wick of the anti-gravity loop-shaped heat pipe

DOI

2015

Thermal performance of a miniature loop heat pipe using water–copper nanofluid

DOI

2015

Experimental investigations on flow boiling performance of reentrant and rectangular microchannels – A comparative study

DOI

2015

Effects of operation parameters on flow boiling characteristics of heat sink cooling systems with reentrant porous microchannels

DOI

2015

Flow boiling performance of Ω-shaped reentrant copper microchannels with different channel sizes

DOI

2015

Thermal and optical investigations of high power LEDs with metal embedded printed circuit boards

DOI

2015

A Detailed Study on Phosphor-Converted Light-Emitting Diodes With Multi-Phosphor Configuration Using the Finite-Difference Time-Domain and Ray-Tracing Methods

IEEE Journal of Quantum Electronics

DOI

2015

Parametric Study on Flow Boiling Characteristics in $\Omega $ -Shaped Re-Entrant Porous Microchannels With Structured Surface

IEEE Transactions on Components, Packaging, and Manufacturing Technology

DOI

2015

Effects of heat flux, mass flux and channel size on flow boiling performance of reentrant porous microchannels

DOI

2015

Novel lithium bromide absorption refrigeration unit and refrigerating capacity regulating method thereof

2015

Integrated preparation method for microstructure lens and mold of microstructure lens

2015

Experimental and numerical study of thermal enhancement in reentrant copper microchannels

DOI

2015

Heat Transfer Performance of an Edge-Shaped Finned Tube

DOI

2015

A comparative study of flow boiling performance in reentrant copper microchannels and reentrant porous microchannels with multi-scale rough surface

DOI

2014

Numerical analysis on thermal hydraulic performance of a flat plate heat pipe with wick column

Heat and Mass Transfer

DOI

2014

Investigations on the heat transfer performance of edge-shaped finned-tubes

Heat and Mass Transfer

DOI

2014

Fabrication and thermal performance of porous crack composite wick flattened heat pipe

DOI

2014

Characterization of capillary rise dynamics in parallel micro V-grooves

DOI

2014

FEASIBILITY OF POROUS COPPER FIBER SINTERED SHEETS (PCFSSS) IN A PLATE HEAT EXCHANGER FOR ENHANCING HEAT TRANSFER

DOI

2014

Thermal performance of a novel porous crack composite wick heat pipe

DOI

2014

Reconstruction and thermal performance analysis of die-bonding filling states for high-power light-emitting diode devices

DOI

2014

Molecule Dynamics Simulation of Heat Transfer Between Argon Flow and Parallel Copper Plates

DOI

2014

Effects of structural parameters on flow boiling performance of reentrant porous microchannels

DOI

2014

A high power LED device with chips directly mounted on heat pipes

DOI

2014

Design and fabrication of sintered wick for miniature cylindrical heat pipe

DOI

2014

Experimental studies on heat transfer and friction factor characteristics of turbulent flow through a circular tube with small pipe inserts

DOI

2014

The Application of Heat Pipe Heat Sink for High Power LED Lamps

DOI

2013

Fabrication of flatten grooved-sintered wick heat pipe

DOI

2013

Analysis of Selective Absorber Coatings on Thermal Performance of the Solar Flat-Plate Collector

DOI

2013

Characterization of capillary performance of composite wicks for two-phase heat transfer devices

DOI

2013

Experimental investigation on isothermal performance of the micro-grooved heat pipe

DOI

2013

Thermal Analysis of Edge Illumination Type LED Backlight with Heat Pipe

DOI

2013

Pool-boiling enhancement by novel metallic nanoporous surface

DOI

2013

Light Extraction Improvement for LED COB Devices by Introducing a Patterned Leadframe Substrate Configuration

IEEE Transactions on Electron Devices

DOI

2013

Effect of fabrication parameters on capillary performance of composite wicks for two-phase heat transfer devices

DOI

2013

Study on the Effect of Manufacturing Parameters of 3D Integral Copper outside Fin Tube on Heat Transfer Coefficient

2013

Heat transfer mechanism of miniature loop heat pipe with water-copper nanofluid: thermodynamics model and experimental study

DOI

2013

EXPERIMENTAL INVESTIGATION OF THE WORKING PERFORMANCE OF A NOVEL MINIATURE LOOP HEAT PIPE

DOI

2013

INVESTIGATION OF THE THERMAL PERFORMANCE OF MINIATURE LOOP HEAT PIPE WITH WATER-COPPER NANOFLUID

DOI

2013

Absorption refrigerator condenser based on heat tube bundle with enhanced condensing function

2013

Thermal column array steam road composite liquid-absorbing core

2013

Evaluation of capillary performance of sintered porous wicks for loop heat pipe

DOI

2013

A multi-artery vapor chamber and its performance

DOI

2013

Detailed Study on Pulse-Sprayed Conformal Phosphor Configurations for LEDs

Journal of Display Technology

DOI

2012

Experimental investigation on anti-gravity loop heat pipe based on bubbling mode

DOI

2012

Condenser design optimization and operation characteristics of a novel miniature loop heat pipe

DOI

2012

Anti-Gravity Loop-shaped heat pipe with graded pore-size wick

DOI

2012

Automobile headlamp based on LED (light-emitting diode) three-dimensional encapsulation

2012

Micro-crack flat heat pipe and manufacturing method thereof

2012

Phase change flattening process for axial grooved heat pipe

DOI

2011

Capillary force of a novel skew-grooved wick structure for micro heat pipes

DOI

2011

A FEASIBILITY STUDY OF APPLYING PULSATING HEAT PIPE IN HEAT SINK

DOI

2011

Synthesis of fractal geometry and CAGD models for multi-scale topography modelling of functional surfaces

DOI

2011

Forming method of wick structure for heat column

DOI

2011

A Novel Heat Sink for High Power Light Emitting Diode-Phase Change Heat Sink

DOI

2011

Fabrication and testing of phase change heat sink for high power LED

DOI

2011

Effects of bending on heat transfer performance of axial micro-grooved heat pipe

DOI

2011

Micro heat pipe vacuuming and clamping device

2010

相变传热微通道技术的研究进展

《机械工程学报》

2010

Forming technology of boiling structure on evaporation surface of phase-change heat sink for high-power light emitting diode

DOI

2010

Experimental investigation into the performance of heat pipe with micro grooves fabricated by Extrusion–ploughing process

DOI

2010

Forming mechanism of integral serrated high fins by plowing-extruding based on variational feed

DOI

2010

A novel miniaturized loop heat pipe

DOI

2010

Flat heat tube with hole-groove combined mandrel and manufacturing method thereof

2010

The Heat Transfer Model and Performance Analysis of Fibre-Enhanced Phase Change Material

International Conference on Digital Manufacturing and Automation

DOI

2010

Effects of Relative Position of Balls and Tool on the Formation of Axial Micro Grooves Inside Circular Micro Heat Pipe during Spinning

DOI

2010

Experimental investigation on capillary force of composite wick structure by IR thermal imaging camera

DOI

2009

Cold welding sealing of copper-water micro heat pipe ends

DOI

2009

三维整体外翅片管滚压-犁切/挤压成形工艺

2009

Feasibility investigations on multi-cutter milling process: A novel fabrication method for microreactors with multiple microchannels

DOI

2009

Compound forming technology of outside 3D integral fin of copper tubes

DOI

2009

Experimental and FEM study on sinking of miniature inner grooved copper tube

DOI

2009

Enhanced Boiling Microstructures Applied to Microelectronics Cooling

International Conference on Measuring Technology and Mechatronics Automation

DOI

2009

Numerical simulation of neck-spinning of thin-wall micro-grooved copper tube

2009

Heat Transport Characteristics of an Oscillating Heat Pipe With Al2O3 Nano-Fluid

DOI

2009

Investigation into performance of a heat pipe with micro grooves fabricated by extrusion–ploughing process

DOI

2008

Thermal performance of heat pipe with different micro-groove structures

DOI

2008

A novel finned micro-groove array structure and forming process

DOI

2008

Study on Inner Micro-Grooves of Heat Pipe Spinning Process and Multi-Tooth Mandrel

DOI

2008

Development of high-aspect-ratio microchannel heat exchanger based on multi-tool milling process

DOI

2008

Micro-column enhanced boiling structure and its ramification

DOI

2008

Experimental investigation on heat transfer and flow resistance of miniature laminate-plate heat exchanger

2008

Forming method of axial micro grooves inside copper heat pipe

DOI

2008

Design and performance test of miniature capillary pumped loop for electronics cooling

DOI

2007

非等宽微通道阵列速度均布的优化设计

《化工学报》

2007

微电子芯片高热流密度相变冷却技术

《流体机械》

2007

Two Different Types of Axially-Grooved Heat Pipes and Thermal Performance Comparison

DOI

2007

Forming Process of cross-connected Finned micro-grooves in Copper Strips

DOI

2007

Experimental study of oil-filled high-speed spin forming micro-groove fin-inside tubes

DOI

2007

Performances of electrically heated microgroove vaporizers

DOI

2006

Study on Process of Planing Forming of Plate Fin Heat Sinks

DOI

2006

Experimental study on the forming of rectangle- & V- channels interconnected boiling enhancement structures

DOI

2006

Formation mechanism of external finned tubes by extrusion-plough method

2005

Planing process of fin heat sinks

Transactions of Nonferrous Metals Society of China

2004

Formation and Flanging Burrs Control of Three-Dimensional Substructure on Copper Surface

DOI

2003

On chopping–extrusion of integral-fin copper tubes

DOI

2003

The establishment and analysis of fin formation model during ploughing process

DOI

2002

一种A型三维外翅片管滚压-犁切加工

《机械工程师》

2015

多孔交错互通微通道的制造与强化传热

《2015年第五届全国地方机械工程学会学术年会暨中国制造2025发展论坛论文集》