王快社

期刊论文

1. 李之怡，王庆娟，杜旭东，杨彤瑶，王文，王快社（2026）. TC4合金高温拉伸变形行为及组织演变机制. 《稀有金属》.
2. 张曾雯，张兵，王凯旋，田成，王兆麟，王林，张胜，詹善成，王快社（2026）. Ni-Cr基变形高温合金的热轧+热处理协同组织调控. 《塑性工程学报》.
3. 邓菁玉，虎小兵，王文，王快社（2026）. 高熵合金力学性能预测的异质因果效应研究. 《铸造技术》.
4. 胡卜亮，张千钧，胡平，周新文，赵新瑞，王凯，史振琦，弋社峰，邢海瑞，王快社（2026）. 烧结态TZM合金氧含量对力学性能的作用机制. 《稀有金属》.DOI
5. 张予源，王文，张旭，韩鹏，霍可越，侯嘉伟，高原，王快社（2026）. 7E33铝合金棒材旋转摩擦焊接温度场与应变场研究. 《塑性工程学报》.
6. 付江锋，乔柯，张旭，王文，王快社（2026）. 转速对搅拌摩擦沉积增材6061铝合金组织及力学性能的影响. 《塑性工程学报》.
7. 李云博，王文，强凤鸣，张宇烨，杨韫熙，马乾芝，薛泽田，王庆娟，王快社（2026）. Cu-4Ti合金动态再结晶行为与热加工工艺优化. 《塑性工程学报》.
8. 林佳，方园，王文，韩鹏，张婷，刘强，向亚婷，强凤鸣，乔柯，王快社（2026）. 搅拌摩擦加工制备细晶Fe40Mn20Co20Cr15Si5高熵合金的显微组织演变和拉伸变形行为（英文）. Transactions of Nonferrous Metals Society of China.
9. 谢海瑞，刘强，王文，张宇烨，张婷，王快社（2026）. 搅拌摩擦加工CuCr30合金微观组织及电弧烧蚀性能研究. 《塑性工程学报》.
10. 张宇烨，韩鹏，王文，叶东明，王快社（2026）. 水下搅拌摩擦加工CoCrFeNiMn高熵合金微观组织及力学性能. 《塑性工程学报》.
11. 杨韫熙，强凤鸣，王文，张宇烨，薛泽田，马乾芝，李云博，刘一霖，孙永亮，王快社（2026）. 固溶温度对Cu-3.4Ti合金组织和力学性能的影响. 《精密成形工程》.
12. 王凯伟，乔柯，王快社，王文，刘艺，陈善勇（2026）. 焊接转速对TWIP钢搅拌摩擦焊接头组织和性能的影响. 《塑性工程学报》.
13. Zhongli Qiao, Qinyang Zhao, Zixuan Meng, Ping Guo, run-zhi Zhang, Yamei Mao, Shuo Song, Huan Wang, Kuaishe Wang, Yong-Qing Zhao (2026). In situ investigation of slip behavior and failure mechanisms in Ti-6Al-4V-0.4Fe-0.6Mo alloy with bimodal microstructure. Materials Science & Engineering: A.DOI
14. Jiale Dong, Qingjuan Wang, Longxin Li, Wen Wang, Kuaishe Wang, Fengming Qiang, Tong Wang, Ruichao Yu (2026). Synergistic effects of Fe microalloying and severe plastic deformation on the microstructure and properties of CuTi alloys. Materials Characterization.DOI
15. Jia Li, Boliang Hu, Xinrui Zhao, Qiang Wang, Shefeng Yi, Zhenqi Shi, Ke Yang, Xuyang Liu, Kun Qu, Ping Hu, Bo Jin, Kuaishe Wang (2026). Mechanism of Second-Phase Formation and Evolution in TZM Alloy Fabricated by Carbon Coating. JOM.DOI
16. Wuteng Sun, Longxin Li, Qingjuan Wang, Rong Hu, Tong Wang, Wen Wang, Kuaishe Wang, Lijun Peng (2026). Solidification microstructure evolution and strengthening mechanisms of LPBF-fabricated CuCrZr alloy as affected by Zr. Materials Science and Engineering A.DOI
17. Ruichao Yu, Qingjuan Wang, Longxin Li, Kuaishe Wang, Wen Wang, Hang Zhang, Bin Gao, Junpeng Sun, Xiaoyu Dou, 苏小五 (2026). Study on the relationship between flow dissipation behavior and dynamic softening mechanisms of Cu-15Ni-8Sn alloy during hot deformation. Journal of Alloys and Compounds.DOI
18. Junzhou Yang, Yufeng Wu, Mingfan Zhou, Yingyi Mei, Peng Li, Yutong Li, Wenting Ye, Ping Hu, Kuaishe Wang (2026). Constrained nonlinear optimization of Arrhenius constitutive parameters for hot deformation modeling of Mo-14Re alloy using a GA–BPNN assisted strategy. International Journal of Refractory Metals and Hard Materials.DOI
19. Xu Zhang, Wen Wang, Kuaishe Wang, Xiaobing Hu, Ke Qiao, Zhao Wang, Keyue Huo, Yuye Zhang, Jingyu Deng, Jiangyun Zhang (2026). Intra-phase nanotwins and multi-stage precipitation enable uniform microstructure and strength–plasticity synergy in AFSD-fabricated 7A52 aluminum alloy. Materials Science and Engineering A.DOI
20. Ke Yang, Boliang Hu, Jia Li, Xinrui Zhao, Qianjun Zhang, Bo Jin, Shefeng Yi, Qiang Wang, Xinwen Zhou, Ping Hu, Kuaishe Wang (2026). Regulation of La₂O₃ dispersed distribution on grain boundary pinning and sintering densification of MoLa alloy. International Journal of Refractory Metals and Hard Materials.DOI
21. Ke Qiao, Shanyong Chen, Ting Zhang, Ruizhao Xu, Yuxuan Su, Peng Han, Zhengyang Hao, Wen Wang, Kuaishe Wang (2026). Electrically assisted friction stir welding of Q&P steel/6061 aluminum alloy: intermetallic compound evolution and mechanical properties. Materials Characterization.DOI
22. Shijie Ding, Yiqing Peng, W M Wang, Penghui Gong, Cheng Wang, Xiaojun Zhao, Yuan Gao, Jiayu Yang, Qianying Jia, Kuaishe Wang (2026). Adaptive mechanism switching enables low friction in graphite-sodium silicate coatings across 600-700 °C. Wear.DOI
23. Zhuang Sun, W M Wang, Fanfan Lv, Gao Y, Jie Yang, Qianying Jia, Kuaishe Wang (2026). Tribochemical evolution and synergistic lubrication mechanisms of sodium silicate coatings on Ti-6Al-4V at elevated temperatures. Tribology International.DOI
24. Biao Xiang, Peng Han, P F Zhang, Wen Wang, Liu Q, Kuaishe Wang (2026). Heterostructure design and strengthening of TC11 alloy based on interfacial β phase. Materials & Design.DOI
25. Deyu Jiang, Lai‐Chang Zhang, Kuaishe Wang, Wen Wang, Chenyuan Zhu, Yuanfei Fu, K W Wang, Wei Zhai, Ching-Chiuan Yen, Weijie Lü, Di Zhang, Liqiang Wang (2026). Machine-learning-guided design of a biomedical high-entropy alloy for additive manufacturing: cast-state benchmark and preliminary LPBF feasibility assessment. Virtual and Physical Prototyping.DOI
26. Feng Gao, Yue Wang, Ke Qiao, Zhengyang Hao, Shanyong Chen, Ruizhao Xu, Jun Cai, W M Wang, Kuaishe Wang (2026). Evolution Mechanism of Intermetallic Compounds and Mechanical Properties of Friction Stir Lap Welded Aluminum Alloy and Steel with Ni Interlayer. Journal of Materials Engineering and Performance.DOI
27. Shijie Ding, Ruoyun Zhang, W M Wang, Penghui Gong, Mingpan Xue, C Wang, Gao Y, Kuaishe Wang (2026). Organic–inorganic hybrid graphite/h-BN composite coating enables effective lubrication and microstructure uniformity during pure titanium hot extrusion under elevated temperatures. International Journal of Refractory Metals and Hard Materials.DOI
28. Jielong Zhang, Jun Cai, Jinyun Yang, Ke Li, Chongchong Li, Qiang Liu, Lin Chen, Peng Zhang, Biao Xiang, Kuaishe Wang (2026). Systematic Study of Hot Deformation Behavior and Optimal Processing Parameters of TC11 Titanium Alloy. JOM.DOI
29. Nan Li, Qiang Wang, Shouxun Ji, Nan Guo, J L Li, Wenjuan Niu, L C Zhou, Xinlei Pan, Guojie Li, Kuaishe Wang (2026). Hierarchical gradient plasticity and strength-ductility synergy in thin-walled Al-Zn-Mg-Cu Alloy enabled by dual-sided laser shock peening. Materials Science and Engineering A.DOI
30. Qingru Wang, Qingru Wang, Qingjuan Wang, Qingjuan Wang, Kuaishe Wang, Wen Wang, PingHui Zhang, Xin Wang, Pingping Zhang (2026). The phase-dependent behavior of high-temperature deformation in Ti65 titanium Alloy: Flow softening, recrystallization mechanisms, and slip system evolution. Journal of Materials Research and Technology.DOI
31. Cheng Wang, Wei Wang, Yan Hou, Jike Deng, Heng Zhao, Jianhua Cai, Kuaishe Wang, Shewei Xin (2026). Quasi-static tensile strength as an indicator of dynamic compression performance and adiabatic shear banding susceptibility in a metastable β-titanium alloy. Journal of Alloys and Compounds.DOI
32. Haiyang Yu, Peng Han, Wen Wang, Hubin Yang, Shuaibo Zhang, Ke Qiao, Fengming Qiang, Zhao Wang, Xiaobing Hu, Qingjuan Wang, Kuaishe Wang (2026). Microstructure, Tensile Properties, and Superplasticity of the Large-Area Fine-Grained Ti–6Al–4V Alloy Sheets Prepared by Multi-pass Friction Stir Processing. Metallurgical and Materials Transactions B.DOI
33. Fanfan Lv, Wei Wang, Junqin Shi, Lulu Xu, Xiaomeng Wang, Yuan Gao, Kuaishe Wang, Jiayu Yang, Qianying Jia (2026). Preparation of Black Phosphorus Nanosheets and Their Lubricating Extreme Pressure Properties in Castor Oil. ACS Applied Nano Materials.DOI
34. Shijie Ding, Shanqi Zhou, Wei Wang, Penghui Gong, Chicheng Luo, Yan Hou, Qianying Jia, Jiayu Yang, Yuan Gao, Kuaishe Wang (2026). Effect of forging temperature and subsequent heat treatment on the microstructure, strength anisotropy, and mechanical properties of the Ti-1300 alloy. Journal of Materials Research and Technology.DOI
35. Shancheng Zhan, B H Zhang, Zhiqiang Lei, Zhijuan Zhang, Zhaolin Wang, Kuaishe Wang (2026). Microstructure evolution and mechanical properties of aluminum alloy laminated composites based on power dissipation coefficient and instability parameters. Materials Characterization.DOI
36. Yingying Liu, Wenhu Guo, Fanglin Wu, Liangliang Zhang, Shifeng Liu, Wen Wang, Kuaishe Wang (2026). Intergranular and exfoliation corrosion behaviors of 2A97 Al-Li alloy via thermal exposure. Materials Science and Technology.DOI
37. Fei Qiang, Xiaofei Tu, Shewei Xin, Ping Guo, Huan Wang, A. Chen, Weiju Jia, Shanyong Chen, Ke Qiao, Wen Wang, Zhiwei Lian, Kuaishe Wang (2026). Microstructure evolution and mechanical properties of near-α titanium alloy during multi-pass hot rolling. Journal of Materials Research and Technology.DOI
38. Jia Yi Lin, Yuan FANG, Wen Wang, Han Peng, Ting Zhang, Qiang Liu, Yating Xiang, Fengming Qiang, Ke Qiao, Kuaishe Wang (2026). Microstructural evolution and tensile deformation behaviors of fine-grained Fe40Mn20Co20Cr15Si5 high entropy alloy prepared by friction stir processing. Transactions of Nonferrous Metals Society of China.DOI
39. Shijie Ding, Gege Guo, Wei Wang, Penghui Gong, Cheng Wang, Yuan Gao, Kuaishe Wang (2026). Temperature-dependent tribological behavior and interfacial mechanism of (SiTiAlNaCa)O multicomponent oxide glass coating. Journal of Materials Research and Technology.DOI
40. Boliang Hu, Chaofan Quan, Xinrui Zhao, Hairui Xing, Zhenqi Shi, Shefeng Yi, Qiang Wang, Junzhou Yang, Li Wang, Bo Jin, Ping Hu, Kuaishe Wang (2026). Microstructure and performance optimization of molybdenum alloys reinforced by zirconium carbide whiskers. Journal of Alloys and Compounds.DOI
41. Cheng Wang, Wei Wang, Shijie Ding, Penghui Gong, Heng Zhao, Jianhua Cai, Kuaishe Wang, Shewei Xin (2026). Failure analysis and microstructural design for adiabatic shear banding in a Ti–Al–Mo–Cr–Fe dual-phase titanium alloy under dynamic loading. Engineering Failure Analysis.DOI
42. Kaiwei Wang, Kaiwei Wang, Ke Qiao, Kuaishe Wang, Hongduo Wang, Wen Wang, Hongduo Wang, Jiangyun Zhang, Yi Liu, Xu Guo, Kai Zhou, Fengming Qiang (2026). Microstructure, mechanical properties and deformation of electrically assisted friction stir welded twinning-induced plasticity steel joint. International Journal of Minerals Metallurgy and Materials.DOI
43. Qianjun Zhang, Boliang Hu, Jia Li, Xinrui Zhao, Ke Yang, Shefeng Yi, Hairui Xing, Zhenqi Shi, Fan Yang, Ping Hu, Kuaishe Wang (2026). Sintering densification kinetics and microstructural-property evolution of ultrafine molybdenum powders. International Journal of Refractory Metals and Hard Materials.DOI
44. Mengyuan Wang, Wei J. Wang, Jun Cai, Xinyi Li, Shijie Ding, Penghui Gong, Cheng Wang, Yuan Gao, Kuaishe Wang (2026). Processing maps and microstructural characterization of typical regions during hot deformation of N36 zirconium alloy. Journal of Materials Research and Technology.DOI
45. Fanfan Lv, Wei Wang, Chunyan Wei, Zhuang Sun, YUAN GAO, Kuaishe Wang (2026). Preparation and High-Temperature Tribological Properties of Na2O-CaO-P2O5 Phosphate Glass Coating. Journal of Materials Engineering and Performance.DOI
46. Bofan Xu, Qingjuan Wang, Kuaishe Wang, Wen Wang, Hang Zhang, Bin Gao, Junpeng Sun, Fei Wang (2026). Achieving ultra-high strength in copper-titanium alloys through multistage thermomechanical processing induced strengthening. Materials Science and Engineering A.DOI
47. Longxin Li, Qingjuan Wang, Fan Yang, Wen Wang, Kuaishe Wang (2026). Delaying coarsening and suppressing recrystallization to increase the thermal stability of additively manufactured Cu alloy. Materials Science and Engineering A.DOI
48. Chi Xu, Weitao Yang, Yixing Ma, Qi Yang, Kuaishe Wang (2026). Martensite-Embedded Heterostructured Interface with Extraordinary Synergistic Strain Accommodation in a TWIP/IF/TWIP Multilayered Steel Composite. Metallurgical and Materials Transactions A.DOI
49. Y. Y. Zhang, Fengming Qiang, Wen Wang, Yunxi Yang, Yunbo Li, Zetian Xue, Qianzhi Ma, Qingjuan Wang, Ke Qiao, Kuaishe Wang (2026). Multi-scale microstructure evolution and its coupling effects on mechanical and electrical properties in cold-rolled Cu-Ti alloys. Journal of Alloys and Compounds.DOI
50. Yunqing Zhu, Lijun Peng, Zaiyan Shang, Songbai Hong, Feng Liu, Kuaishe Wang, Junsheng Wu, Haofeng Xie (2026). Nanostructural design to enhance the bendability of ultra-high-strength Cu-3.5Ti-0.22Fe alloys: A novel precipitation mechanism of the β-Cu4Ti phase. Materials Science and Engineering A.DOI
51. Peng Han, Wen Wang, Jun Cai, Jia Lin, Hubin Yang, Qianzhi Ma, Feng Gao, Ke Qiao, Fengming Qiang, Kuaishe Wang (2026). Excellent superplasticity for lamellar microstructure in nugget of a double-sided friction stir welded Ti-4.5Al-3V-2Mo-2Fe alloy joint. Metals Advances.DOI
52. Peng Han, Jiaxing Duan, Qianzhi Ma, Jia Lin, Fengming Qiang, Wen Wang, Ke Qiao, Kuaishe Wang (2026). High-performance CoCrFeNi/6061 aluminum matrix composites fabricated by cold spray-friction stir processing composite additive manufacturing. Journal of Manufacturing Processes.DOI
53. Yi Liu, Yating Xiang, Wen Wang, Xiaobin Hu, Zhao Wang, Pengfei Zheng, Keyue Huo, Ke Qiao, Fengming Qiang, Kuaishe Wang, Jun Cai (2026). Microstructure evolution during room-temperature tensile deformation and TRIP effect-dominated strength-ductility synergy mechanism of (Fe40Mn20Co20Cr15Si5)100-Cu dual phase high entropy alloy prepared by friction stir Cu alloying. Journal of Alloys and Compounds.DOI
54. 张喆，高楠熙，雷作栋，崔尚坤，曹飞，邹军涛，王文，王快社（2025）. 超声辅助凝固制备Cu-Ti合金组织及性能研究. 《铸造技术》.
55. 邢海瑞，史茜霜，胡卜亮，李世磊，李延超，王华，王强，徐流杰，冯锐，张文，胡平，王快社（2025）. 固溶热处理对低氧TZM合金组织和力学性能的影响（英文）. 《稀有金属材料与工程》.
56. 王强，张兵，瞿宗宏，雷智强，赖运金，李少强，王快社（2025）. 镍基粉末高温合金的热变形行为和微观组织演变. 《塑性工程学报》.
57. 张莹，王文，张旭，刘艺，郑鹏飞，乔柯，强凤鸣，王快社（2025）. 烧结温度对WC-Al0.5CoCrFeNiTi0.5硬质合金微观组织及性能的影响. 《材料科学与工艺》.
58. 张晓，王快社，刘仁智，席莎，周莎，付静波（2025）. 高温热处理对Mo-0.9La合金板材组织及力学性能的影响. 《热加工工艺》.DOI
59. 王力，王兆宇，胡平，韩嘉彧，赵卫国，高黎黎，王快社（2025）. 钼合金表面熔盐法制备硅化物涂层工艺. 《粉末冶金技术》.DOI
60. 王强，张兵，瞿宗宏，张曾雯，赖运金，高欢，李少强，杨奔，王快社（2025）. FGH4097合金热处理过程中γ′相演变行为. 《稀有金属材料与工程》.
61. 刘莹莹，刘世锋，王庆娟，王快社（2025）. 一流本科专业建设背景下“金属塑性加工工艺学2”课程思政教学改革探索. 《教育教学论坛》.DOI
62. 朱正康，李文兵，蔡军，黄培根，高兴年，宋蔚，王文，王快社（2025）. 大直径白铜管有外模扩径拉拔数值模拟. 《塑性工程学报》.
63. 兰青，王文，乔柯，张婷，马乾芝，郝政扬，王快社（2025）. 铝/钢异种金属超声振动辅助搅拌摩擦搭接焊接头微观组织与力学性能. 《塑性工程学报》.
64. 薛凯芮，乔柯，张婷，刘强，王文，王快社（2025）. 孪生诱发塑性钢搅拌摩擦焊接温度场及塑性流场数值模拟. 《塑性工程学报》.
65. 向亚婷，王文，刘艺，韩鹏，林佳，王快社（2025）. 搅拌摩擦加工Fe40Mn20Co20Cr15Si5高熵合金微观组织和拉伸性能. 《塑性工程学报》.
66. 张旭，王文，刘艺，张莹，张予源，侯嘉伟，王快社（2025）. 7E33稀土铝合金旋转摩擦焊接头微观组织与拉伸性能. 《塑性工程学报》.
67. 段佳兴，韩鹏，王文，侯嘉伟，郭旭，王快社（2025）. 多道次搅拌摩擦加工改性冷喷涂增材制造6061铝合金微观组织及力学性能. 《塑性工程学报》.
68. 霍可越，王文，刘艺，张旭，郑鹏飞，王快社（2025）. 基于搅拌摩擦焊接技术的钛钢复合板接头界面特征与力学性能. 《塑性工程学报》.
69. 张旭，王智，强凤鸣，王文，韩鹏，张婷，刘强，刘艺，霍可越，王快社，乔柯（2025）. 搅拌摩擦焊接和时效处理制备高强度、高热导率的ZM51镁合金接头（英文）. Transactions of Nonferrous Metals Society of China.
70. 王快社（2025）. 纳米层状二硫化钼制备与应用.
71. 张祎丹，韩鹏，王文，周凯，张予源，罗雷，王快社（2025）. SP700钛合金热压剪变形行为及组织演变. 《塑性工程学报》.
72. 宋蔚，蔡军，李洋，朱正康，强凤鸣，乔柯，王快社（2025）. Cu-Sn合金的3种高温本构模型对比分析. 《塑性工程学报》.
73. Changxi Liu, Li-Qiang Wang, Miao Luo, Kuaishe Wang, Marco De Battista, Ling Zhang, Wei-Jie Lu, Lai-Chang Zhang, Di Zhang (2025). The strengthening mechanisms and incipient plasticity of additively manufactured biomedical refractory high entropy alloys. Virtual and Physical Prototyping.DOI
74. Bo-Liang Hu, Chaofan Quan, Shengjie Ma, Qianjun Zhang, H. Xing, Li Wang, Ping Hu, Xin-Wen Zhou, Yan-Chao Li, Xin-Rui Zhao, Pengfa Feng, Kuaishe Wang (2025). Strengthening-toughening mechanism of carbon-coated TiC/ZrC secondary phase Doping molybdenum alloy. Materials Science & Engineering: A.DOI
75. K. Qiao, Jia Wang, Xu Guo, Jingchang Yao, Feng Gao, Liqiang Wang, Qi Yang, Wen Wang, Kuaishe Wang (2025). Heterostructure mediated high strength and ductility in stir zone of friction stir mechanical alloying Q&P 1180 steel joint. Materials Science & Engineering: A.DOI
76. Xiao Zhang, Pengfa Feng, Xuyang Liu, Chun-Yang Bu, Kuaishe Wang, Hang Qu (2025). Investigation on the Thermal Decomposition Behavior of Molybdenum Trioxide Precursor. Materials.DOI
77. Zhongli Qiao, Qinyang Zhao, Zixuan Meng, Ping Guo, Runqi Zhang, Huan Wang, Cheng Lin, Kuaishe Wang, Yong-Qing Zhao (2025). Achieving excellent strength plasticity matching in low-cost titanium alloy via nano-twinning and hierarchical phase structure. Rare Metals.DOI
78. Zhongli Qiao, Qinyang Zhao, Zixuan Meng, Ping Guo, Runqi Zhang, Yan Zhang, Shuo Song, Cheng Lin, Kuaishe Wang, Yong-Qing Zhao (2025). Multiscale analysis of high impact toughness in a novel low-cost titanium alloy. Journal of Materials Research and Technology.DOI
79. Ying‐Ying Liu, Xuan Liu, Junyi Zhang, Kai-Xin Ren, Chun Li, Feng Wang, Shifeng Liu, Wen Wang, Kuaishe Wang (2025). Distribution of the residual stress on Ti600/TC18 joint welded by inertial friction welding. Materials Science and Technology.DOI
80. Heng Li, Fengming Qiang, Xinyu Wu, Jiangyun Zhang, Wen Wang, Ruizhao Xu, Jun Cai, Ke Qiao, Kuaishe Wang (2025). Strain partitioning governs sequential dynamic recrystallization of TiAl alloys during hot deformation in (α + β) two-phase region. Materials Characterization.DOI
81. Binglong Zhang, Wei Wang, J. Wang, Penghui Gong, Mingpan Xue, Yingxuan Li, Yuan Gao, Kuaishe Wang (2025). Alkyl-functionalized black phosphorus nanosheets for tribological enhancement of polyurea grease. Tribology International.DOI
82. Shilei Li, Ping Hu, Hairui Xing, Hua Wang, Wen Zhang, Li Yu, Jing Long Liang, Kai Chen, Tian Chang, Hai Long Xu, Jianfeng Li, Kuaishe Wang (2025). Solute-induced precipitation nanosized Ti-rich phase greatly enhances the plasticity of Mo-Ti-Zr alloys. Materials & Design.DOI
83. Penghui Gong, Shijie Ding, Wei Wang, Shaowen Dong, Yuan Gao, Kuaishe Wang (2025). Development of oxidized black phosphorus nanosheets as water-based nano-lubricant additive for titanium alloy rolling. Wear.DOI
84. Ke Qiao, Xuhong Guo, Xu Zhang, Xiaobing Hu, Feng Gao, Jingchang Yao, Fengming Qiang, Ronghui Xu, Liqiang Wang, Yuqing Mao, Wen Wang, Kuaishe Wang (2025). Microstructure evolution and mechanical properties of high entropy alloy reinforced titanium matrix composites processed by cold spray-friction stir processing composite additive manufacturing. Advanced Composites and Hybrid Materials.DOI
85. Biao Xiang, Peng Zhang, Peng Han, Wen Wang, Qiang Liu, Kuaishe Wang (2025). Microstructural evolution and mechanical properties of TC11 titanium alloy during α+β hot deformation. Journal of Materials Research and Technology.DOI
86. Xuehua Li, Yunqing Zhu, Lijun Peng, Jinhua Wang, Kuaishe Wang, Shu-Hui Huang, Haofeng Xie, Minglong Ma (2025). Breaking the trade-off between strength and residual stress in an ultra-high strength Cu-3Ti-0.2Fe alloy through thermo-mechanical coupling control. Materials Science and Engineering A.DOI
87. Peng Han, Shuaijun Chen, Kuaishe Wang, Feng Gao, Jiang Liu, Baohong Yan, Qianzhi Ma, Fengming Qiang, Ke Qiao, Wang Yong Wen (2025). Large-Area AA6061 Alloy Sheets Prepared via Multi-pass Particles-Based Additive Friction Stir Deposition. Metallurgical and Materials Transactions B.DOI
88. Pengfei Zheng, Ying Zhang, Wen Wang, Xiaobing Hu, Zhao Wang, Yi Liu, Keyue Huo, Jia Lin, Han Peng, Fengming Qiang, Kuaishe Wang (2025). Effect of Al0.5CoCrFeNiTi0.5 binder on WC grain growth inhibition and strengthening-toughening of WC-based cemented carbides. Journal of Alloys and Compounds.DOI
89. Deyu Jiang, Lai‐Chang Zhang, Kuaishe Wang, Mahmoud Ebrahimi, Wen Wang, Liqiang Wang, Weijie Lü, Di Zhang (2025). Emerging design paradigms and microstructural innovations in refractory high-entropy alloys: a critical review. Materials Futures.DOI
90. Cheng Wang, Wei Wang, Cheng Ping Luo, Shanqi Zhou, Kuaishe Wang, Jianhua Cai, Shewei Xin (2025). Effect of secondary α-phase precipitation on high-strain-rate deformation and shear band evolution in metastable β-titanium alloy. Journal of Materials Research and Technology.DOI
91. Yunqing Zhu, Lijun Peng, Mingxing Guo, Guojie Huang, Kuaishe Wang, Junsheng Wu, Dongmei Liu, Haofeng Xie (2025). Overcoming the trade-off among strength, ductility, and electrical conductivity in an ultra-high strength Cu-3Ti-0.2Fe alloy through regulating precipitates and nanostructures. Journal of Material Science and Technology.DOI
92. Zuodong Lei, Zhe Zhang, Nanxi Gao, Fei Cao, Rong Fei, Yuchen Song, Wen Wang, Juntao Zou, Kuaishe Wang (2025). Synergistic enhancement of tensile strength and electrical conductivity in Cu-3Ti alloy via designing different rolling routes. Materials Characterization.DOI
93. Meina Cai, Meina Cai, Hao Yang, Xuechao Liu, Jun Cai, Jing Zhou, Gangtao Sun, Kuaishe Wang (2025). Dynamic recrystallization behavior of molybdenum: Microstructure evolution and numerical simulation. Materials Chemistry and Physics.DOI
94. Longxin Li, Qingjuan Wang, Kuaishe Wang, Wen Wang, Yaojia Ren, Tongyao Yang, Zhiyi Li (2025). Dual-scale nanoprecipitates achieve superior strength-ductility-conductivity in copper alloys prepared by laser powder bed fusion. Journal of Alloys and Compounds.DOI
95. Jing Yang, Qingjuan Wang, Tongyao Yang, Zhongze Du, Wen Wang, Kuaishe Wang (2025). The dynamic and static softening mechanisms of LX82A steel in double-pass hot compression deformation. Journal of Materials Science.DOI
96. Junzhou Yang, Shichen Wang, Kuaishe Wang, Yongqiang Fang, Hua Wang, Wang Li, Hairui Xing, Ping Hu (2025). Molybdenum-Rhenium alloy: A focused review of strengthening-toughening mechanism and method. International Journal of Refractory Metals and Hard Materials.DOI
97. Xu Zhang, Zhi Wang, Fengming Qiang, Wen Wang, Peng HAN, Ting Zhang, Qiang Liu, Yi Liu, Ke-yue HUO, Kuaishe Wang, Ke Qiao (2025). ZM51 magnesium alloy joint with high strength and thermal conductivity fabricated via friction stir welding and aging. Transactions of Nonferrous Metals Society of China.DOI
98. Haonan Wang, Bowen Li, Wen Wang, Kuaishe Wang (2025). Corrigendum to “Texture evolution during friction stir processing of Nb-1Zr alloy” [Mater. Today Commun. 35 (2023) 106114]. Materials Today Communications.DOI
99. Haonan Wang, Bowen Li, Wen Wang, Kuaishe Wang (2025). Corrigendum to “Preparation of ultrafine-grained Nb-1Zr alloy by increasing the time of large plastic deformation during friction stir processing” [Mater. Today Commun. 36 (2023) 106647]. Materials Today Communications.DOI
100. Haonan Wang, Bowen Li, Xin Xin, Wen Wang, Kuaishe Wang (2025). Corrigendum to “Development and characteristics of Nb-1Zr alloy with high strength-ductility synergy” [J. Alloys Compd., vol. 1031 (2025) 180960]. Journal of Alloys and Compounds.DOI
101. Qingyang Li, Jun Cai, Yu Qing Fan, Hongqiang Nan, Yan Ru Yang, Lin Chen, Chongchong Li, Yiwen Yu, Xiaokang Yang, Wen Wang, Kuaishe Wang, Bing Zhang (2025). Hot Deformation Characteristics and Dynamic Recrystallization Mechanism of GH3625 Superalloy. Journal of Materials Engineering and Performance.DOI
102. Haonan Wang, Bowen Li, Hao Chen, Wen Wang, Kuaishe Wang (2025). The influence of welding methods on the microstructure evolution of pure Ag in friction stir welding. Materials Letters.DOI
103. Yunxi Yang, Fengming Qiang, Lili Zhang, Wen Wang, Ke Qiao, Zhao Wang, Xiaobing Hu, Juan Carlos Nieto-Fuentes, Kuaishe Wang (2025). Interlayer-assisted explosive welding of 5083Al/SS316 composite plates: Interlayer design and thermal stability. Materials Characterization.DOI
104. Qinghao Yang, Xing-Jiang Hua, Chaofan Quan, Hua Wang, Li Wang, Hairui Xing, Junzhou Yang, Qiang Wang, Ping Hu, Kuaishe Wang (2025). Enhanced mechanical properties and thermal stability of boron doped molybdenum alloy. International Journal of Refractory Metals and Hard Materials.DOI
105. Shichen Wang, Junzhou Yang, Ping Hu, Xianjun Wang, Zhixuan Wang, Qiang Wang, Rui Feng, Bo Jin, Kuaishe Wang (2025). Research on the high-temperature deformation constitutive model of La-TZM alloy. Journal of Materials Science.DOI
106. Qijia Chu, Hairui Xing, Zixin Yang, Hua Wang, Yongqiang Fang, Liujie Xu, Ping Hu, Qiang Wang, Rui Feng, Kuaishe Wang (2025). Enhanced strength of a novel La-TZM alloy via multicomponent second phase strengthening mechanism. Materials Characterization.DOI
107. Zhijuan Zhang, Bing Zhang, Zhaolin Wang, Zhiqiang Lei, Shancheng Zhan, Kuaishe Wang (2025). Deformation coordination behaviors and microstructure evolution of 1060Al/6061Al-SiC/1060Al composites during hot deformation. Materials Characterization.DOI
108. Zekun Wei, Wei Guo Wang, Di Wang, Kuaishe Wang, Sefei Yang, Mengyuan Wang (2025). High WC content promotes continuous eutectic structure formation and enhances wear resistance in WC/CeO₂-Fe laser cladding coatings. Surface and Coatings Technology.DOI
109. Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang, Lai‐Chang Zhang, Kuaishe Wang, Wen Wang, Lechun Xie, Liqiang Wang, Weijie Lü, Di Zhang (2025). 3D Printing parameter optimisation combined with heat treatment for achieving high density and enhanced performance in refractory high-entropy alloys. Virtual and Physical Prototyping.DOI
110. Junyi Zhang, Ying‐Ying Liu, Jiangbo Zhai, Nian Zhou, Shifeng Liu, Qianhui Tan, Wen Wang, Kuaishe Wang (2025). Axial Shortening Distance of Ti60/TC18 Heterogeneous Alloys by Inertia Friction Welding: Combine FEM Model, Microstructure and Properties. Metallurgical and Materials Transactions A.DOI
111. Beite Gao, Qingjuan Wang, Haolin Li, Minna Li, Li-Peng Zhou, Guodong Wang, Wei Wang, Shewei Xin, Kuaishe Wang (2025). Dependence of the plastic deformation mechanism of metastable β-Ti alloy on stacking fault energy and temperature at wide temperature range. Journal of Alloys and Compounds.DOI
112. Yuyuan Zhang, Xu Zhang, Wen Wang, Jiawei Hou, Fengming Qiang, Yi Liu, Keyue Huo, Pengfei Zheng, Peng Han, Ke Qiao, Yuan Fei Gao, Kuaishe Wang (2025). Dynamic precipitation behavior and recrystallization mechanism during hot deformation of 7E33 aluminum alloy. Materials Characterization.DOI
113. Qinghao Yang, Xing-Jiang Hua, Chaofan Quan, Hua Wang, Li Wang, Hairui Xing, Junzhou Yang, Qiang Wang, Ping Hu, Kuaishe Wang (2025). Microstructure evolution and strengthening mechanism of boron doped molybdenum alloy solid solution rolled plates. Journal of Alloys and Compounds.DOI
114. Di Wang, Qingjuan Wang, Bofan Xu, Kuaishe Wang, Wen Wang, Fengming Qiang, Ke Qiao (2025). The effect of Fe content on the microstructure and properties of Cu–3Ti alloy. Journal of Materials Research and Technology.DOI
115. Yiwen Yu, Fengming Qiang, Jun Cai, Chongchong Li, Wang Yong Wen, Kuaishe Wang (2025). Hot deformation behavior and microstructural evolution of as-cast TC4 titanium alloy. Journal of Materials Science.DOI
116. Jiangwei Hu, Qingjuan Wang, Kuaishe Wang, Wen Wang, Fengming Qiang, Longxin Li (2025). Coupled Temperature–Flow Field and Microstructure Numerical Simulation of the Solidification Process for Cu-3Ti-0.2Fe Alloy. Materials.DOI
117. Haonan Wang, Haonan Wang, Bowen Li, Xin Xin, Wen Wang, Kuaishe Wang (2025). Development and characteristics of Nb-1Zr alloy with high strength-ductility synergy. Journal of Alloys and Compounds.DOI
118. Ji Cai Feng, Qingjuan Wang, Wen Wang, Kuaishe Wang, Xinlong Reng, Bofan Xu, Longxin Li (2025). Thermomechanical Treatment Behavior and Aging Precipitation Mechanism of Cu-7Fe-0.3Mg Alloy. Journal of Materials Engineering and Performance.DOI
119. Longjie Dang, Bing Zhang, Zengwen Zhang, Zhiqiang Lei, Zhijuan Zhang, Zhaolin Wang, Jie Zhao, Shancheng Zhan, Kuaishe Wang (2025). Evolution of LPSO Phase in Hot Deformation of as‐Forged Mg‐9Gd‐3Y‐2Zn‐0.3Zr Alloy and its Effect on Microstructure and Recrystallization Mechanism. Advanced Engineering Materials.DOI
120. Shichen Wang, Junjie Wang, Junzhou Yang, Hua Wang, Yanchao Li, Wen Zhang, Li Wang, Hairui Xing, Ping Hu, Qiang Wang, Rui Feng, Bo Jin, Kuaishe Wang (2025). Optimizing feasible domains for parameter identification in multi-scales constitutive model of La-TZM alloy. International Journal of Refractory Metals and Hard Materials.DOI
121. Peng Han, Jun Cai, Ke Qiao, Fengming Qiang, Wen Wang, Kuaishe Wang (2025). High strain rate superplasticity in ultrafine-grained Ti-4.5Al–3V–2Mo–2Fe alloy. Journal of Materials Research and Technology.DOI
122. Ying‐Ying Liu, Qihao Yang, Wan‐Tao Tian, Tao He, Lin‐Lin Cui, Xiaofei Liu, Shifeng Liu, Kuaishe Wang (2025). Enhancing Workability Through Adjusting Element Content: A Study on the Hot Deformation Behavior of a Modified Titanium Alloy. Advanced Engineering Materials.DOI
123. Penghui Gong, Wei Wang, Gege Guo, Shijie Ding, Zhuang Sun, Yuan Gao, Kuaishe Wang (2025). Understanding the Impacts of Adhesive on the Tribological Performance and High-Temperature Oxidation Behavior of Glass Lubricant Coatings in Hot Extrusion Process of Titanium Alloy. Journal of Materials Engineering and Performance.DOI
124. Kai Zhou, Peng Han, Wen Wang, Hubin Yang, Xuhong Guo, Jiawei Hou, Yuyuan Zhang, Ke Qiao, Fengming Qiang, Kuaishe Wang (2025). Microstructure and tensile properties of a large-scale Ti-4.5Al-3V-2Mo-2Fe alloy plate with ultrafine grains prepared by multi-pass friction stir processing. Materials Today Communications.DOI
125. Di Wang, Qingjuan Wang, Wen Wang, Kuaishe Wang, Tongyao Yang (2025). The Dynamic Continuous Cooling Transformation and Phase Transformation Kinetics of 80 High-Carbon Steel. Metallurgical and Materials Transactions B.DOI
126. Jiayu Han, Wang Li, Ping Hu, Bo-Liang Hu, Shengjie Ma, Lili Gao, Run Bai, Qiang Wang, Rui Feng, Bo Jin, Kuaishe Wang (2025). Correction to: Research progress in modification of MoSi2 coatings on surface of refractory metals and their alloys: a review. Rare Metals.DOI
127. Junzhou Yang, Xianjun Wang, Shichen Wang, Z. Y. Wang, Hairui Xing, Kuaishe Wang, Bo-Liang Hu, Li Wang, Peng Dang, Ping Hu (2025). A Review of Grain Evolution Effect on Accommodation Mechanism, Modeling, and Processing of Superplastic Titanium Alloys. JOM.DOI
128. Wei Song, Jun Cai, Zhengkang Zhu, Bing Zhang, Kuaishe Wang, Yan Yang, Yu Qing Fan (2025). Study on the Ductile Fracture Criterion of C19210 Copper Alloy for Profiled Strips. JOM.DOI
129. Keyue Huo, Peng Han, Wen Wang, Yi Liu, Xu Zhang, Pengfei Zheng, Ke Qiao, Fengming Qiang, Qingjuan Wang, Kuaishe Wang (2025). Role of intermetallic compounds in the fracture of double-sided friction stir welded titanium-steel clad plates. Materials Characterization.DOI
130. 杨俊宙，王世臣，王先俊，王智轩，王力，邢海瑞，胡卜亮，高选乔，张文，胡平，王快社（2024）. Mo-14Re钼铼合金高温压缩耦合内变量的本构模型建立. 《稀有金属材料与工程》.
131. 张晓，任宝江，冯鹏发，安耿，卜春阳，胡平，席莎，李晶，周莎，王快社（2024）. 预变形Mo-0.3La合金的热变形行为研究. 《稀有金属材料与工程》.
132. 张晓，王快社，牛帅，任宝江，刘旭洋（2024）. 离心干燥制备含镧钼酸铵的焙解机制. 《稀有金属材料与工程》.
133. 倪立锦，王文，韩鹏，乔柯，强凤鸣，王快社（2024）. 水下搅拌摩擦加工Ti-15-3合金的组织及超塑性变形. 《兵器材料科学与工程》.
134. 强凤鸣，寇宏超，王文，王快社（2024）. TiAl合金热加工过程中的组织演变与力学性能研究. 《第十二届中国金属学会青年学术年会暨首届〝碳中和〞冶金青年科学家沙龙论文集（二）》.DOI
135. 张向阳，胡平，邢海瑞，何朝军，杨帆，张文，党晓明，王快社（2024）. 钼金属的离子辐照损伤行为研究进展. 《稀有金属材料与工程》.
136. 何攀，王文，强凤鸣，张莹，乔柯，王快社（2024）. 热压烧结新型WC/Al0.5CoCrFeNiTi0.5硬质合金摩擦磨损性能研究. 《材料科学与工艺》.
137. 许博凡，王庆娟，邵慧军，宋家乐，任新龙，王快社（2024）. 工艺参数对选区激光熔化CuCrZr合金单道次熔道特性的影响. 《铸造技术》.DOI
138. 叶东明，韩鹏，王文，张宇烨，王快社（2024）. Co CrFeNi/6061Al复合材料冷喷摩擦复合增材制造及增强相影响规律研究. 《塑性工程学报》.
139. 王元一，乔柯，张婷，郝政扬，王佳，王文，王快社（2024）. Cu和Ni中间层对铝/钢异种金属搅拌摩擦搭接焊接头界面微观组织及剪切性能的影响. 《塑性工程学报》.
140. 王俣豪，乔柯，张兵，王快社，王文，孙琦（2024）. 冷喷摩擦复合增材制造制备ZrO2颗粒增强钛基复合材料组织与磨损性能. 《塑性工程学报》.
141. 刘世锋，刘莹莹，王庆娟，王快社（2024）. 以赛促学、以赛促教、以赛促改的教学模式改革——以“材料分析方法”课程为例. 《教育教学论坛》.
142. 蔡军，杨清相，乔柯，王文，王快社（2024）. C70600白铜空心锭立式连铸工艺参数对凝固过程的影响. 《机械科学与技术》.
143. 王庆娟，张茜，王快社，刘世锋，张玉峰，邵慧军（2024）. 选区激光熔化成形工艺参数对CuCrZr合金组织和性能的影响. 《材料工程》.
144. 林佳，王文，王立斐，韩鹏，马景昊，王快社（2024）. 多层结构钼-硅系涂层制备对增材制造Ta10W合金力学性能的影响. 《航空材料学报》.
145. 郝朋程，张兵，张志娟，赵田丽，刘广龙，陈乐，徐依，蔡军，王快社（2024）. 1060Al/Al-Al2O3/1060Al层状铝基复合材料热变形模型对比分析. 《塑性工程学报》.
146. 刘晓平，王快社，胡平（2024）. 纯钼选区激光熔化(SLM)成形过程中致密化行为研究. 《中国钼业》.
147. 郝政扬，王晨曦，王快社，乔柯，王佳，王文，孙琦（2024）. 焊接速度对Q&P980钢搅拌摩擦焊接头组织和性能的影响. 《塑性工程学报》.
148. Zhongli Qiao, Qinyang Zhao, Ping Guo, Cheng Lin, Huan Wang, Runqi Zhang, Zixuan Meng, Kuaishe Wang, Yong-Qing Zhao (2024). The role of multiple interfaces induced by hierarchical phase structures in the corrosion of low-cost titanium alloys. Materials & Design.DOI
149. Changxi Liu, Lai-Chang Zhang, Kuaishe Wang, Li-Qiang Wang (2024). Improving strength and plasticity via pre-assembled dislocation networks in additively manufactured refractory high entropy alloy. Acta Materialia.DOI
150. Zhiqiang Lei, Bing Zhang, Tianli Zhao, Zhijuan Zhang, Zengwen Zhang, Shancheng Zhan, Jie Zhao, Kuaishe Wang, Jun Cai (2024). Effect of Heat Treatment on the Interfacial Structure and Microstructure of Al/Al/Cu Composites Prepared by Different Accumulative Roll Bonding Passes. Advanced Engineering Materials.DOI
151. Ke Qiao, Kuaishe Wang, Feng Gao, Kairui Xue, Jingchang Yao, Wen Wang (2024). Effect of friction stir welding with different heat input on microstructure evolution, mechanical properties and deformation behavior of twin-induced plasticity steel. Materials Characterization.DOI
152. Yating Xiang, Zhihao Liu, Wen Wang, Peng Han, Jia Lin, Pengfei Zheng, Ke Qiao, Fengming Qiang, Qingjuan Wang, Kuaishe Wang (2024). High cycle fatigue behavior of bulk 6061Al prepared by cold spray-friction stir processing composite additive manufacturing. Engineering Fracture Mechanics.DOI
153. Yingying Liu, Wenhu Guo, Jian Yang, Shifeng Liu, Wen Wang, Kuaishe Wang (2024). Effect of Thermal Exposure on the Microstructure and Mechanical Properties of 2A97 Al-Li Alloy. Journal of Materials Engineering and Performance.DOI
154. Junzhou Yang, Qianwen Zhang, Kuaishe Wang, Jianjun Wu, Ping Hu (2024). A multi-scale constitutive model based gas pressure determination method for the grain size evolution of superplastic forming. International Journal of Lightweight Materials and Manufacture.DOI
155. Kairui Xue, Ke Qiao, Ting Zhang, Feng Gao, Jingchang Yao, Wang Yong Wen, Kuaishe Wang (2024). Hot Deformation Behavior and Dynamic Recrystallization Mechanism of Fe-18.2Mn-0.52C Twinning-Induced Plasticity Steel. JOM.DOI
156. Zhiyi Li, Qingjuan Wang, Xudong Du, Congcong Yang, Kuaishe Wang (2024). Thermal Deformation Behavior and Microstructural Evolution Mechanism of TC4 Titanium Alloy Based on Hot Processing Map. JOM.DOI
157. Qingyang Li, Jun Cai, Lin Chen, Chongchong Li, Yiwen Yu, Xiaokang Yang, Wen Wang, Kuaishe Wang (2024). High-temperature deformation behavior and microstructural evolution of TC17 alloy. Materials Today Communications.DOI
158. M. Zhang, Jinming Liu, P. Xue, F.C. Liu, L.H. Wu, D.R. Ni, B.L. Xiao, Kuaishe Wang, Z.Y. Ma (2024). Eliminating Cu-rich intermetallic compound layer in dissimilar friction stir welding of 304 stainless steel and 2219 Al alloy via ultralow rotation speed. Journal of Materials Processing Technology.DOI
159. Tianli Zhao, Bing Zhang, Zhijuan Zhang, Jie Zhao, Shancheng Zhan, Longjie Dang, Zengwen Zhang, Jun Cai, Kuaishe Wang (2024). Hot deformation, processing maps, and microstructural evolution of Ti/Ni/Ti layered composites. Materials Characterization.DOI
160. Ben Yang, Bing Zhang, Zhijuan Zhang, Shancheng Zhan, Zengwen Zhang, Huan Bing Gao, Qiang Wang, Jun Cai, Kuaishe Wang (2024). Effect of multi-pass friction stir processing and rolling on microstructure of interface structure and mechanical properties of 2024Al/AZ31B composites. Journal of Materials Research and Technology.DOI
161. Longxin Li, Qingjuan Wang, Kuaishe Wang, Wen Wang, Yufeng Zhang, Xi Zhang (2024). Precipitation behavior of supersaturated solid-solubility CuCrZr alloy by additive manufacturing. Materials Science and Engineering A.DOI
162. Li Wang, Weiguo Zhao, Cheng Man, Lili Gao, Jiayu Han, Bo-Liang Hu, Junzhou Yang, Ping Hu, Kuaishe Wang, Chaofang Dong (2024). Optimization the cracking and corrosion resistance of MoSi2 coating by addition of TiVAlZrNb high-entropy alloy on laser powder bed fusion high-strength stainless steel. Materials Characterization.DOI
163. Huan Bing Gao, Bing Zhang, Yu Qing Fan, Zhijuan Zhang, Hongqiang Nan, Tianli Zhao, Zhiqiang Lei, Jun Cai, Kuaishe Wang (2024). Study on the hot deformation behavior and microstructure evolution of as-forged GH3625 alloy. Journal of Materials Research and Technology.DOI
164. Qiang Liu, Wen Wang, Ting Zhang, Qianzhi Ma, Peng Han, D.R. Ni, Ke Qiao, Kuaishe Wang (2024). Low-cycle fatigue behaviour of magnesium alloy thick plate joints fabricated via differential double-shoulder friction stir welding. International Journal of Fatigue.DOI
165. Maiping Yan, Xiaoli Shi, Wei He, Yehua Jiang, Jing Feng, Kuaishe Wang (2024). The influence of Mn content on Fe2B properties and its impact at the αZ‐Fe16C2 /Fe2B interface. Vacuum.DOI
166. Ying‐Ying Liu, Nian Zhou, Chun Li, Junyi Zhang, Shifeng Liu, Kuaishe Wang (2024). Optimization of Heat-Treatment Process for Corrosion Resistance of Ti600/TC18 Inertial Friction Welding Joint. JOM.DOI
167. Peng Han, Kuaishe Wang, Wen Wang, Lijin Ni, Jia Lin, Yating Xiang, Qiang Liu, Ke Qiao, Fengming Qiang, Jun Cai (2024). Microstructure evolution and mechanical properties of Ti-15-3 alloy joint fabricated by submerged friction stir welding. Archives of Civil and Mechanical Engineering.DOI
168. Jia Wang, Ke Qiao, Ting Zhang, Wen Wang, Kuaishe Wang, Zhengyang Hao, Yuanyi Wang, Yuhao Wang, Yang Qi (2024). Microstructure and deformation behavior of rapid cooling friction stir welded Q&P1180 steel joint. Materials Science and Engineering A.DOI
169. Qingjuan Wang, Jiale Song, Wen Wang, Yufeng Zhang, Kuaishe Wang, Zhongze Du (2024). The Influence of Heat Treatment on Microstructure and Properties of Selective Laser Melting CuCrZr Alloy. Advanced Engineering Materials.DOI
170. Jie Zhao, Bing Zhang, Tianli Zhao, Zhijuan Zhang, Zhiqiang Lei, Zhaolin Wang, Zengwen Zhang, Shancheng Zhan, Longjie Dang, Kuaishe Wang (2024). Effects of stacking sequence of the layers on deformation behavior and microstructure evolution of Ti/Ni laminated metal composites. Journal of Materials Research and Technology.DOI
171. Peng Han, Wen Wang, Jingyu Deng, Ke Qiao, Kai Zhou, Jia Lin, Yuye Zhang, Fengming Qiang, Kuaishe Wang (2024). Achieving excellent superplasticity and predicting the elongations in ultrafine-grained Ti-4.5Al-3V-2Mo-2Fe titanium alloy prepared by friction stir processing. Journal of Materials Processing Technology.DOI
172. Fengming Qiang, Hongchao Kou, Yudong Zhang, Nana Chen, Zhihong Wu, Ke Qiao, Wen Wang, Kuaishe Wang, Emmanuel Bouzy (2024). Crystallographic orientation related dynamic recrystallization behavior and its impact on texture development of high-temperature α phase in TiAl alloy. Journal of Alloys and Compounds.DOI
173. Yingying Liu, Junyi Zhang, Fan Wu, Jun-jie Yang, Jia-yi Li, Jiang-bo Zhai, Shifeng Liu, Wen Wang, Kuaishe Wang (2024). Numerical Simulation of Dynamic Recrystallization Behavior During Continuous Variable Cross-Section Recycled Extrusion of Ti–6Al–4V Alloy Based on FEA–CA Model. Metallurgical and Materials Transactions B.DOI
174. Hairui Xing, Xiangyang Zhang, Hua Wang, Qijia Chu, Wen Zhang, Yanchao Li, Liujie Xu, Ping Hu, Qiang Wang, Rui Feng, Kuaishe Wang (2024). Low-energy hydrogen ion irradiation effect on the surface defects of powder metallurgy molybdenum. International Journal of Refractory Metals and Hard Materials.DOI
175. Ruiyan Sun, Ping Hu, Jin Wang, Fan Yang, Fei Zhu, Hairui Xing, Jiao Luo, Lili Gao, Kuaishe Wang, Zongyou Yin (2024). Refractory Metal‐Based MXenes: Cutting‐Edge Preparation and Applications. Small.DOI
176. Ping Hu, Fairy Fan Yang, Fairy Fan Yang, Fan Yang, Fan Yang, Fei Zhu, Jiao Luo, Xiaolong Chen, Wenqi Li, Jiaming Bian, Lili Gao, Kuaishe Wang, Zongyou Yin (2024). Bimetallic organic framework derived Co-MoxN/Mo2C catalyst for HER/OER bifunctional electrocatalytic reaction. Journal of Colloid and Interface Science.DOI
177. Shancheng Zhan, Bing Zhang, Zhiqiang Lei, Zhijuan Zhang, Junyang Duan, Zhaolin Wang, Jie Zhao, Longjie Dang, Zengwen Zhang, Kuaishe Wang (2024). Study on the microstructure of AA6016/AA7050/AA6016 laminated composites based on Murty and Prasad instability criterion. Journal of Alloys and Compounds.DOI
178. Jiayu Han, Wang Li, Ping Hu, Bo-Liang Hu, Shengjie Ma, Lili Gao, Run Bai, Qiang Wang, Rui Feng, Bo Jin, Kuaishe Wang (2024). Research progress in modification of MoSi 2 coatings on surface of refractory metals and their alloys: a review. Rare Metals.DOI
179. Bofan Xu, Qingjuan Wang, Wen Wang, Kuaishe Wang, Lei Wang, Jiangwei Hu (2024). Precipitation behavior and performance evolution of cold-rolled cu-Ti-Fe alloy during heat treatment. Materials Characterization.DOI
180. Fengming Qiang, Xinyu Wu, Yonghao Yu, Meina Cai, Wen Wang, Lulu Li, Yi Liu, Jun Cai, Hongchao Kou, Kuaishe Wang (2024). Quantitative analysis on microstructure characteristic of pre-strained β-solidified TiAl alloy during post-heat treatment. Vacuum.DOI
181. Shijie Ding, Wenjuan Chang, Wei Wang, Penghui Gong, Cheng Wang, Fanfan Lv, Xiongxiong Gao, Yuan Gao, Kuaishe Wang (2024). Fluorinated Boron Nitride Nanosheets-Based Solid Lubricating Coating for Tribological Applications at Elevated Temperatures. ACS Applied Nano Materials.DOI
182. Haonan Wang, Bowen Li, Xin Xin, Wen Wang, Kuaishe Wang (2024). Preparation of fine-grained/ultrafine-grained Nb521 alloy with superior mechanical property by friction stir processing. Journal of Materials Research and Technology.DOI
183. Ying‐Ying Liu, Siyu Tan, Jian Yang, Xuan Liu, Junjie Yang, Lucy Li, Shifeng Liu, Wang Yong Wen, Kuaishe Wang (2024). Research on Hot Deformation Behavior of Ti-5Al-5Mo-5V-1Cr-1Fe Titanium Alloy with Basket-Weave Microstructure. JOM.DOI
184. Fengming Qiang, Pengfei Zheng, Pan He, Wen Wang, Ying Zhang, Han Peng, Kuaishe Wang (2024). Insight into Grain Refinement Mechanisms of WC Cemented Carbide with Al0.5CoCrFeNiTi0.5 Binder. Materials.DOI
185. Xudong Du, Qingjuan Wang, Congcong Yang, Zhiyi Li, Fengming Qiang, Wen Wang, Kuaishe Wang (2024). Effect of primary α phase fraction on deformation mechanism of Ti-1023 alloy at room temperature. Materials Science and Engineering A.DOI
186. Ke Qiao, Kuaishe Wang, Jia Wang, Zhengyang Hao, Kairui Xue, Jun Cai, Fengming Qiang, Wen Wang (2024). Microstructure Evolution and Recrystallized Behavior of Friction Stir Welding Twin-Induced Plasticity Steel. Acta Metallurgica Sinica (English Letters).DOI
187. Peng Han, Lijin Ni, Wen Wang, Kai Zhou, Hubin Yang, Lin Jia, Ke Qiao, Fengming Qiang, Jun Cai, Qingjuan Wang, Kuaishe Wang (2024). Superplastic deformation behaviors of fine-grained Ti-15 V-3Cr-3Al-3Sn alloy prepared via ultra-low heat input friction stir processing. Materials Characterization.DOI
188. 王伟，周山琦，宫鹏辉，张浩泽，史亚鸣，王快社（2023）. 退火温度对TC4钛合金热轧板材的显微组织、织构和力学性能影响. 《材料研究学报》.
189. 徐依，张兵，杨艳，陈乐，赵田丽，王奇，张志娟，杨奔，昝斌，蔡军，王快社（2023）. GH4169合金在冷轧和热处理过程中的组织演变和力学性能（英文）. 《稀有金属材料与工程》.
190. 祁凯，张兵，赵田丽，杨艳，张志娟，王快社，蔡军（2023）. 热处理对Cu/Ti层状异质结构复合材料组织及力学性能的影响. 《塑性工程学报》.
191. 何朝军，胡平，邢海瑞，杨帆，张向阳，林小辉，华兴江，白润，张文，王快社（2023）. 轧制Mo-14%Re合金的显微组织和室温拉伸性能（英文）. 《稀有金属材料与工程》.
192. 朱飞，胡平，葛松伟，杨帆，李泽林，尹霏，白润，王快社（2023）. Nb-Si基合金及其涂层的高温氧化行为研究进展. 《稀有金属材料与工程》.
193. 潘奘，高原，王伟，王快社，吴彤，王一童（2023）. 润滑效果对热挤压核级Zr-4合金显微组织的影响. 《稀有金属材料与工程》.
194. 王伟，程鹏，屈怡珅，辛社伟，邹德宁，王快社（2023）. Ni含量和烧结压力对SPS法制备NiTi合金显微组织及摩擦学性能的影响. 《稀有金属材料与工程》.
195. 刘志浩，韩鹏，王文，关肖虎，王智，方园，乔柯，叶东明，蔡军，谢迎春，王快社（2023）. 冷喷摩擦复合增材制造6061铝合金的显微组织、力学性能和腐蚀行为（英文）. Transactions of Nonferrous Metals Society of China.
196. 张晓，王快社，卜春阳，庄飞，武洲（2023）. 退火温度对钼锆合金组织和力学性能的影响. 《热加工工艺》.
197. 马艳恒，张兵，张志娟，赵田丽，王快社，蔡军（2023）. 冷轧对搅拌摩擦加工Al/Cu复合材料微观组织和力学性能的影响. 《塑性工程学报》.
198. 刘志浩，王文，韩鹏，王快社（2023）. 搅拌摩擦加工改性冷喷涂6061铝合金涂层的断裂行为. 《塑性工程学报》.
199. 王智，王文，张志娟，韩鹏，方园，张婷，王快社（2023）. 水下搅拌摩擦加工制备CoCrFeNiMn/6061Al复合材料组织和性能研究. 《塑性工程学报》.
200. 王佳，乔柯，王文，张婷，郝政扬，王快社（2023）. 强制冷却对搅拌摩擦加工QP1180钢组织与力学性能的影响. 《塑性工程学报》.
201. 张晓，王快社，牛帅，刘旭洋，李森，薛光弟（2023）. 400℃焙解二钼酸铵制备纯三氧化钼空气流量研究. 《中国钼业》.
202. 王文，方园，彭湃，张志娟，韩鹏，张婷，刘志浩，关肖虎，王智，乔柯，王快社（2023）. 搅拌摩擦加工制备AZ31/CoCrFeNi复合材料的组织、力学性能和磨损性能（英文）. Transactions of Nonferrous Metals Society of China.
203. 刘强，王文，彭湃，张婷，韩鹏，关肖虎，王智，乔柯，蔡军，王快社（2023）. 20 mm厚AZ31镁合金厚板搅拌摩擦焊接接头的显微组织演变及强化机制（英文）. Transactions of Nonferrous Metals Society of China.
204. Ying‐Ying Liu, Wan‐Tao Tian, Qihao Yang, Jian Yang, Kuaishe Wang (2023). Inertia radial friction welding of Ti60(near-α)/TC18(near-β) bimetallic components: Interfacial bonding mechanism, heterogenous microstructure and mechanical properties. Materials Characterization.DOI
205. Junzhou Yang, Kuaishe Wang, Jianjun Wu, Qianwen Zhang, Gang Lian Zhao, Ping Hu (2023). Effect of misorientation evolution on the fracture mechanism. Materials Letters.DOI
206. Ting Zhang, Zhengyang Hao, Kuaishe Wang, Kuaishe Wang, Ke Qiao, Kairui Xue, Qiang Liu, Peng Han, Wang Yong Wen, Pengfei Zheng (2023). Effect of Ni interlayer on interfacial microstructure and fatigue behavior of friction stir lap welded 6061 aluminum alloy and QP1180 steel. International Journal of Fatigue.DOI
207. Qingjuan Wang, Xinlong Ren, Lei Wang, Tianrong Yan, Kuaishe Wang, Bofan Xu (2023). Study on Hot Deformation Behavior and Dynamic Recrystallization Mechanism of Cu‐Ti‐Fe Alloy. Advanced Engineering Materials.DOI
208. Qiang Liu, Wen Wang, Pai Peng, Ting Zhang, Peng HAN, Xiaohu Guan, Zhi Wang, Ke Qiao, Jun Cai, Kuaishe Wang (2023). Microstructure evolution and strengthening mechanism of friction stir welded joint of 20 mm-thick AZ31 magnesium alloy. Transactions of Nonferrous Metals Society of China.DOI
209. Shiwei Xu, Peijie Xiao, Xiaofan Wu, John Holmes, F. Mompiou, Zhenyu Xiao, Chen Jin, Tianjiao Li, Kuaishe Wang, Zhuoran Zeng (2023). Mechanistic investigation of highly bendable magnesium alloy sheet fabricated by short-process manufacturing. Journal of Magnesium and Alloys.DOI
210. Zhihao Liu, Peng HAN, Wang Yong Wen, Xiaohu Guan, Zhi Wang, Yuan FANG, Ke Qiao, Dong-ming YE, Jun Cai, Yingchun Xie, Kuaishe Wang (2023). Microstructure, mechanical properties, and corrosion behavior of 6061Al alloy prepared by cold spray-friction stir processing composite additive manufacturing. Transactions of Nonferrous Metals Society of China.DOI
211. Fengming Qiang, Hongchao Kou, Yuqing Li, Nana Chen, Zhihong Wu, Yonghao Yu, Ke Qiao, Wen Wang, Kuaishe Wang (2023). Enhanced strength-ductility synergy of β-solidifying TiAl alloy with preferred lamellar orientation by texturing high-temperature α phase through hot extrusion. Materials Science and Engineering A.DOI
212. Wang Li, Meihui Sun, Jiayu Han, Weiguo Zhao, Junzhou Yang, Bo-Liang Hu, Wenjiang Li, Ping Hu, Kuaishe Wang, Chaofang Dong (2023). The effect of multiscale second-phase particles on the corrosion behavior of laser powder bed fusion high strength stainless steel. Materials Characterization.DOI
213. Zhijuan Zhang, Bing Zhang, Xiaohan Dang, Tianli Zhao, Yingchun Xie, Jun Cai, Kuaishe Wang (2023). Effect of Al2O3 particle content on microstructure and mechanical properties of 1060Al/Al–Al2O3 composites fabricated by cold spraying and accumulative roll bonding. Journal of Materials Research and Technology.DOI
214. Wen Wang, Yuan FANG, Pai Peng, Zhijuan Zhang, Peng HAN, Ting Zhang, Zhihao Liu, Xiaohu Guan, Zhi Wang, Ke Qiao, Kuaishe Wang (2023). Microstructure, mechanical and wear properties of AZ31/CoCrFeNi composites fabricated by friction stir processing. Transactions of Nonferrous Metals Society of China.DOI
215. Haonan Wang, Haonan Wang, Bowen Li, Wen Wang, Kuaishe Wang (2023). Preparation of ultrafine-grained Nb-1Zr alloy by increasing the time of large plastic deformation during friction stir processing. Materials Today Communications.DOI
216. Ke Qiao, Kuaishe Wang, Jia Wang, Zhengyang Hao, Yating Xiang, Peng Han, Jun Cai, Yang Qi, Wen Wang (2023). Microstructural evolution and deformation behavior of friction stir welded twin-induced plasticity steel. Journal of Material Science and Technology.DOI
217. Zhiqiang Lei, Bing Zhang, Guanglong Liu, Tianli Zhao, Zhijuan Zhang, Huan Bing Gao, Jun Cai, Kuaishe Wang (2023). Study on microstructure evolution and fracture behavior of Al/Al/Cu multilayer composites. Journal of Materials Research and Technology.DOI
218. Li Wang, Xing He, Ping Hu, Decheng Kong, Kuaishe Wang, Chaofang Dong (2023). Enhancing corrosion resistance of additive manufactured heterogeneous martensite stainless steel by hot isostatic pressing. Materials Characterization.DOI
219. Songwei Ge, Ping Hu, Jie Deng, Shi-Lei Li, Hairui Xing, Jiayu Han, Xing-Jiang Hua, Li Wang, Jun-Zhou Yang, Bo Jin, Wen Zhang, Kuaishe Wang (2023). The effect of secondary phase on corrosion behaviors of the titanium–zirconium–molybdenum alloy. Tungsten.DOI
220. Tong Liu, Ping Hu, Shilei Li, Qian-Shuang Shi, Run Bai, Bo Jin, Bo-Liang Hu, Xuan Wang, LiWang, Jun-Zhou Yang, Kuaishe Wang (2023). Oxygen content effect on mechanical properties and microstructure of TZM alloy. Materials Characterization.DOI
221. Ting Zhang, Kuaishe Wang, Ke Qiao, Bing Qi Wu, Qiang Liu, Han Peng, Wen Wang, Yuanyi Wang, Zhengyang Hao, Pengfei Zheng (2023). Evolution mechanism of intermetallic compounds and the mechanical properties of dissimilar friction stir welded QP980 steel and 6061 aluminum alloy. Materials Characterization.DOI
222. Hongduo Wang, Zhiyong Zhou, Kuaishe Wang, Wen Wang, Han Peng, Chengwen Zhang, Yongxin Lu, Guang Li, Yidi Lu, Xiao Li, Yanming Liu, Xiaoyong Zhang (2023). Microstructure and corrosion behaviors of friction stir-welded Q235 low-carbon steel joint. Journal of Iron and Steel Research International.DOI
223. Haonan Wang, Haonan Wang, Bowen Li, Wen Wang, Kuaishe Wang (2023). Texture evolution during friction stir processing of Nb-1Zr alloy. Materials Today Communications.DOI
224. Le Chen, Bing Zhang, Yan Ru Yang, Tianli Zhao, Yi Xu, Qi Wang, Bin Zan, Jun Cai, Kuaishe Wang, Xi Chen (2023). Evolution of hot processing map and microstructure of as-forged nickel-based superalloy during hot deformation. Journal of Materials Research and Technology.DOI
225. Beite Gao, Qingjuan Wang, Wei Wang, Shewei Xin, Yaling Sun, Kuaishe Wang (2023). Study on the deformation mechanism of Ti–10Mo–1Fe solid-solution alloys with different cooling rates. Journal of Materials Research and Technology.DOI
226. Shilei Li, Ping Hu, Tong Liu, Qian-Shuang Shi, Bo-Liang Hu, Xing-Jiang Hua, Songwei Ge, Jiayu Han, Wen Zhang, Kuaishe Wang, Alex A. Volinsky (2023). Micro-nano secondary phase greatly increases the plasticity of titanium-zirconium-molybdenum alloy. International Journal of Refractory Metals and Hard Materials.DOI
227. Qiang Liu, D.R. Ni, Wen Wang, Yating Xiang, Peng Han, Ting Zhang, Ke Qiao, Fengming Qiang, Liqiang Wang, Liqiang Wang, Kuaishe Wang (2023). Improved mechanical properties of magnesium alloy thick plate joint via uniform microstructure by differential double-shoulder friction stir welding. Materials Letters.DOI
228. Qingjuan Wang, Huijun Shao, Xi Zhang, Kuaishe Wang, Shifeng Liu, Congcong Yang, Wen Wang (2023). Study of thermal behavior and microstructure formation mechanism of CuCrZr alloy melted by laser powder bed fusion. Materials Characterization.DOI
229. Jiayu Han, Quan Cheng, Ping Hu, Hairui Xing, Shilei Li, Songwei Ge, Xing-Jiang Hua, Bo-Liang Hu, Wen Zhang, Kuaishe Wang (2023). Finite Element Analysis of Large Plastic Deformation Process of Pure Molybdenum Plate during Hot Rolling. Metals.DOI
230. 陈善勇，王快社，乔柯，王文（2022）. 碱热处理对搅拌摩擦加工AZ31镁合金耐腐蚀性能的影响. 《金属热处理》.
231. 强菲，王文，张婷，杨娟，蔡军，王快社（2022）. Al-Zn-Mg-Cu铝合金厚板搅拌摩擦焊接头搅拌区微观组织. 《金属热处理》.
232. 张兵，刘鹏茹，陈韩锋，杨艳，赵芬芬，党晓晗，王快社（2022）. 铸态GH2132合金热变形行为和热加工图. 《中国有色金属学报》.
233. 王伟，宫鹏辉，史亚鸣，张浩泽，张晓锋，王快社（2022）. 轧制火次对EB熔炼TC4钛合金显微组织、织构和力学性能的影响. 《中国有色金属学报》.
234. 周莎，王快社，王文，崔玉青，张晓，安耿（2022）. Cu-Cr-Zr合金搅拌摩擦焊接头微观组织与性能研究. 《热加工工艺》.
235. 方园，王快社，王文，张志娟（2022）. 搅拌摩擦加工Fe40Mn20Co20Cr15Si5高熵合金的疲劳行为. 《塑性工程学报》.
236. 杨清相，蔡军，王快社，李冲冲，鱼祎雯，李清阳（2022）. 基于修正Johnson-Cook本构模型的BFe10-1.6-1白铜合金高温流变行为. 《塑性工程学报》.
237. 杨娟，王文，蔡军，王快社，李冲冲，鱼祎雯（2022）. Al-Zn-Mg-Cu合金热变形行为. 《塑性工程学报》.
238. 邢海瑞，张向阳，杨帆，胡平，王快社（2022）. 金属氧化物增强钼合金组织性能研究进展. 《中国钼业》.
239. Qingjuan Wang, Yufeng Zhang, Kuaishe Wang, Shifeng Liu, Xi Zhang, Huijun Shao (2022). Effect of process parameters and heat treatment on the microstructure and properties of CuCrZr alloy by selective laser melting. Materials Science and Engineering A.DOI
240. Hairui Xing, Ping Hu, Chao-Jun He, Xiangyang Zhang, Fan Yang, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Wen Zhang, Kuaishe Wang, Alex A. Volinsky (2022). Exploring the Formation Mechanism, Evolution Law, and Precise Composition Control of Interstitial Oxygen in Body-Centered Cubic Mo. Metals.DOI
241. Wenjing Chen, Lina Gu, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Ping Hu, Run Bai, Wen Zhang, Tian Chang, Kuaishe Wang (2022). The Effect of Heat Treatment and Different Degrees of Deformation on the Microstructure and Mechanical Properties of Pure Mo Sheets. Metals.DOI
242. Junyi Feng, Daixiu Wei, Peilei Zhang, Zhishui Yu, Changxi Liu, Weijie Lü, Kuaishe Wang, Hua Yan, Lai‐Chang Zhang, Liqiang Wang (2022). Preparation of TiNbTaZrMo high-entropy alloy with tunable Young's modulus by selective laser melting. Journal of Manufacturing Processes.DOI
243. Tianli Zhao, Bing Zhang, Zhijuan Zhang, Le Chen, Yi Xu, Jun Cai, Kuaishe Wang (2022). Deformation behavior and microstructural evolution of pure Ti produced by hot compressing. Journal of Materials Research and Technology.DOI
244. Xiaohu Guan, Wen Wang, Ting Zhang, Pai Peng, Qiang Liu, Peng Han, Ke Qiao, Jun Cai, Liqiang Wang, Kuaishe Wang (2022). A new insight into LPSO phase transformation and mechanical properties uniformity of large-scale Mg-Gd-Y-Zn-Zr alloy prepared by multi-pass friction stir processing. Journal of Magnesium and Alloys.DOI
245. Jun Cai, Lin Chen, Peng Han, Juan Yang, Qingxiang Yang, Qingyang Li, Ben Ding, Ke Qiao, Jiang Li, Qian Zhao, Wen Chuang Wang, Kuaishe Wang (2022). Hot deformation behavior and microstructure evolutions of as-forged Mg-Gd-Y-Zn-Zr alloy. Journal of Materials Research and Technology.DOI
246. Jun Cai, Lin Chen, Juan Yang, Wen Wang, Ben Ding, Qingxiang Yang, Ke Qiao, Kuaishe Wang (2022). Hot Deformation Behavior and Microstructure Evolution of High-Strength Al-Zn-Mg-Cu Alloy. Metals.DOI
247. Qingjuan Wang, Congcong Yang, Jincheng Wu, Beite Gao, Zeen He, Kuaishe Wang (2022). Phase transformation behavior of Ti-1023 under static heat treatment and dynamic thermo-mechanical coupling. Materials Characterization.DOI
248. Yintao Zhang, Jia Liu, Liqiang Wang, Daixiu Wei, Changxi Liu, Kuaishe Wang, Yujin Tang, Ling Zhang, Weijie Lü (2022). Porous NiTiNb alloys with superior strength and ductility induced by modulating eutectic microregion. Acta Materialia.DOI
249. Shilei Li, Ping Hu, Tong Liu, Qian-Shuang Shi, Xiao-Ming Dang, Bo-Liang Hu, Wen Zhang, Kuaishe Wang (2022). Formation mechanism of coronal composite secondary phase in titanium-zirconium-molybdenum alloy. Materials Characterization.DOI
250. Han Peng, Jia Lin, Wen Wang, Zhihao Liu, Yating Xiang, Ting Zhang, Qiang Liu, Xiaohu Guan, Ke Qiao, Yingchun Xie, Kuaishe Wang (2022). Friction Stir Processing of Cold-Sprayed High-Entropy Alloy Particles Reinforced Aluminum Matrix Composites: Corrosion and Wear Properties. Metals and Materials International.DOI
251. M. Zhang, Yandong Wang, P. Xue, H. Zhang, D.R. Ni, Kuaishe Wang, Z.Y. Ma (2022). High-quality dissimilar friction stir welding of Al to steel with no contacting between tool and steel plate. Materials Characterization.DOI
252. Hongduo Wang, Chengwen Zhang, Zhiyong Zhou, Yunzi Zhang, Kuaishe Wang, Wen Wang, Han Peng, Yongxin Lu, Xiao Li, Yanming Liu, Xiaoyong Zhang, Yong Zhou, Xueli Xu (2022). Effect of the microstructure on the corrosion behavior of dissimilar friction stir-welded 304 austenitic stainless steel and Q235 low-carbon steel joints. Materials Research Express.DOI
253. Bing Zhang, Kai Qi, Zhijuan Zhang, Xiaohan Dang, Yanheng Ma, Jianping Wang, Kuaishe Wang, Wen Wang, Jun Cai (2022). Effect of Heterogeneous Ti Layers on Mechanical Properties of Cu/Ti Laminated Sheets Prepared by Accumulative Roll Bonding. physica status solidi (a).DOI
254. Haonan Wang, Wen Wang, Bowen Li, Peng Han, Hairui Xie, Kuaishe Wang (2022). Friction stir welding of Nb-1Zr alloy. Materials Letters.DOI
255. Tianli Zhao, Bing Zhang, Fenfen Zhao, Zhijuan Zhang, Xiaohan Dang, Yanheng Ma, Jun Cai, Kuaishe Wang (2022). Hot deformation behavior of multilayered Ti/Ni composites during isothermal compression. Journal of Materials Research and Technology.DOI
256. Ke Qiao, Ting Zhang, Kuaishe Wang, Shengnan Yuan, Liqiang Wang, Shanyong Chen, Yuhao Wang, Kairui Xue, Wen Wang (2022). Effect of multi-pass friction stir processing on the microstructure evolution and corrosion behavior of ZrO2/AZ31 magnesium matrix composite. Journal of Materials Research and Technology.DOI
257. Han Peng, Wen Wang, Zhihao Liu, Ting Zhang, Qiang Liu, Xiaohu Guan, Ke Qiao, Dongming Ye, Jun Cai, Yingchun Xie, Kuaishe Wang (2022). Modification of cold-sprayed high-entropy alloy particles reinforced aluminum matrix composites via friction stir processing. Journal of Alloys and Compounds.DOI
258. Xing-Jiang Hua, Ping Hu, Hairui Xing, Jiayu Han, Songwei Ge, Shilei Li, Chao-Jun He, Kuaishe Wang, Chunjuan Cui (2022). Development and Property Tuning of Refractory High-Entropy Alloys: A Review. Acta Metallurgica Sinica (English Letters).DOI
259. Shilei Li, Ping Hu, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Hairui Xing, Jie Deng, Bo-Liang Hu, Fan Yang, Kuaishe Wang (2022). The formation mechanism of micro-nano secondary phase in solid-liquid doped TZM alloy. Materials Characterization.DOI
260. Fei Qiang, Wen Wang, Ke Qiao, Pai Peng, Ting Zhang, Xiaohu Guan, Jun Cai, Qiang Meng, Huaxia Zhao, Kuaishe Wang (2022). Microstructure and Mechanical Properties in Friction Stir Welded Thick Al–Zn–Mg–Cu Alloy Plate. Acta Metallurgica Sinica (English Letters).DOI
261. 王伟，程鹏，李小磊，高原，王快社（2021）. Ni含量对镍钛合金的力学和摩擦学性能的影响. 《稀有金属材料与工程》.
262. 王伟，王萌，蔡军，张浩泽，史亚鸣，张晓锋，黄海广，王快社（2021）. 基于DMNR模型建立EB炉熔炼TC4钛合金的双重多元非线性回归本构方程. 《稀有金属材料与工程》.
263. Shilei Li, Ping Hu, Ye-gai Zuo, Hairui Xing, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Bo-Liang Hu, Chunjuan Cui, Kuaishe Wang (2021). Precise control of oxygen for titanium-zirconium-molybdenum alloy. International Journal of Refractory Metals and Hard Materials.DOI
264. Qingjuan Wang, Beite Gao, Wei Wang, Shewei Xin, Yaling Sun, Kuaishe Wang (2021). Effect of Primary α Phase on the Plastic Deformation Mechanism of Ti–10Mo–1Fe Alloys at Room Temperature. Advanced Engineering Materials.DOI
265. Hairui Xing, Ping Hu, Jiayu Han, Shilei Li, Songwei Ge, Xing-Jiang Hua, Bo-Liang Hu, Fan Yang, Kuaishe Wang, Pengfa Feng (2021). Effects of oxygen on microstructure and evolution mechanism of body-centred-cubic molybdenum. International Journal of Refractory Metals and Hard Materials.DOI
266. Bo-Liang Hu, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Shilei Li, Hairui Xing, Kuaishe Wang, Ping Hu, Jingbo Fu, Wen Zhang, Alex A. Volinsky, Ekaterina S. Marchenko (2021). Secondary phases strengthening-toughening effects in the Mo–TiC–La2O3 alloys. Materials Science and Engineering A.DOI
267. Bo-Liang Hu, Songwei Ge, Jiayu Han, Xing-Jiang Hua, Shilei Li, Hairui Xing, Long-Teng Yuan, Xiangyang Zhang, Kuaishe Wang, Ping Hu, Alex A. Volinsky (2021). ZrTiO4 secondary phase effects on ductility and toughness of molybdenum alloys. Materials Letters.DOI
268. Xiaohan Dang, Bing Zhang, Zhijuan Zhang, Pengcheng Hao, Yi Xu, Yingchun Xie, Renzhong Huang, Kuaishe Wang, Wen Wang, Qiang Wang (2021). Microstructural evolutions and mechanical properties of multilayered 1060Al/Al–Al2O3 composites fabricated by cold spraying and accumulative roll bonding. Journal of Materials Research and Technology.DOI
269. Wen Wang, Shanyong Chen, Ke Qiao, Pai Peng, Han Peng, Bing Wu, Chenxi Wang, Jia Wang, Yuhao Wang, Kuaishe Wang (2021). Microstructure, Mechanical Properties, and Corrosion Behavior of Mg–Al–Ca Alloy Prepared by Friction Stir Processing. Acta Metallurgica Sinica (English Letters).DOI
270. Pai Peng, Wen Wang, Ting Zhang, Qiang Liu, Xiaohu Guan, Ke Qiao, Jun Cai, Kuaishe Wang (2021). Effects of interlayer metal on microstructures and mechanical properties of friction stir lap welded dissimilar joints of magnesium and aluminum alloys. Journal of Materials Processing Technology.DOI
271. Jun Cai, Min Guo, Pai Peng, Han Peng, Xiaokang Yang, Ben Ding, Ke Qiao, Kuaishe Wang, Wen Wang (2021). Research on Hot Deformation Behavior of As-Forged TC17 Titanium Alloy. Journal of Materials Engineering and Performance.DOI
272. Qingjuan Wang, Beite Gao, Kuaishe Wang, Wei Wang, Libo Tong, Xiangjun Li (2021). Dynamic and static softening mechanisms of commercial-purity Zr during double-stage hot compressive deformation. Materials Science and Engineering A.DOI
273. Pai Peng, Wen Wang, Yuanyuan Jin, Qiang Liu, Ting Zhang, Ke Qiao, Jun Cai, Kuaishe Wang (2021). Experimental investigation on fatigue crack initiation and propagation mechanism of friction stir lap welded dissimilar joints of magnesium and aluminum alloys. Materials Characterization.DOI
274. Ke Qiao, Ting Zhang, Kuaishe Wang, Shengnan Yuan, Shengyi Zhang, Liqiang Wang, Zhi Wang, Pai Peng, Jun Cai, Chaozong Liu, Wen Wang (2021). Mg/ZrO2 Metal Matrix Nanocomposites Fabricated by Friction Stir Processing: Microstructure, Mechanical Properties, and Corrosion Behavior. Frontiers in Bioengineering and Biotechnology.DOI
275. Ping Hu, Ye-gai Zuo, Shilei Li, Hairui Xing, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Kuaishe Wang, Wen Zhang, Jingbo Fu (2021). Synthesis and oxygen evolution mechanism of hypoxia carbon-control titanium-zirconium-molybdenum alloy. Journal of Alloys and Compounds.DOI
276. Xiaoping Liu, Kuaishe Wang, Ping Hu, Xiaomei He, Baicheng Yan, Xuzhao Zhao (2021). Formability, Microstructure and Properties of Inconel 718 Superalloy Fabricated by Selective Laser Melting Additive Manufacture Technology. Materials.DOI
277. Ping Hu, Hui Li, Ye-gai Zuo, Songwei Ge, Shilei Li, Hairui Xing, Jiayu Han, Xing-Jiang Hua, Kuaishe Wang, Laiping Li (2021). Investigation of microstructure and tensile properties of as-processed TZM alloy at elevated temperature. Materials Characterization.DOI
278. 刘晓平，王快社，何晓梅，顾盼（2020）. 感应等离子体制备超细氮化钼粉研究. 《兵器材料科学与工程》.DOI
279. 张志娟，张兵，张诗林，杨晓康，赵田丽，程健，王快社（2020）. 热处理工艺对累积叠轧Ti/Ni多层复合材料界面结构的影响. 《稀有金属材料与工程》.
280. 李辉，胡平，邢海瑞，左烨盖，程权，胡卜亮，王快社，冯鹏发（2020）. 钼合金高温力学性能研究现状综述. 《功能材料》.
281. 王伟，韩子茹，王庆娟，周海雄，高原，王快社（2020）. TiB2增强Ti2AlNb基复合材料的放电等离子烧结制备及其摩擦学性能研究. 《稀有金属》.DOI
282. 王伟，宫鹏辉，张浩泽，史亚鸣，王萌，张晓锋，王快社（2020）. 电子束冷床熔炼TC4钛合金的热变形行为. 《材料研究学报》.
283. 王文，韩鹏，席小鹏，王快社，彭湃，李天麒，乔柯，强菲（2020）. 搅拌摩擦加工制备NiTip/WE43镁基复合材料（英文）. 《稀有金属材料与工程》.
284. 杨晓康，王快社，张志娟，郭敏，蔡军，杨清相（2020）. 铸态TC17钛合金流动应力预测（英文）. 《稀有金属材料与工程》.
285. 张兵，姚苏，王秋雨，李娟，张东，赵田丽，王文，蔡军，王快社（2020）. TA1/AZ31B多层复合材料在等温压缩过程中的变形行为（英文）. 《稀有金属材料与工程》.
286. 周莎，王快社，王文，彭湃，张升懿，黄丽颖（2020）. Cu-Cr-Zr合金搅拌摩擦焊接接头的组织和力学性能. 《金属热处理》.DOI
287. 张升懿，王快社，乔柯，王文，袁胜男（2020）. 转速对TRIP钢搅拌摩擦焊接头组织性能的影响. 《兵器材料科学与工程》.DOI
288. Libo Tong, J.H. Chu, Wanting Sun, Chao Xu, De Ning Zou, Kuaishe Wang, S. Kamado, Mingyi Y. Zheng (2020). Achieving an ultra-high strength and moderate ductility in Mg–Gd–Y–Zn–Zr alloy via a decreased-temperature multi-directional forging. Materials Characterization.DOI
289. Wen Wang, Shengnan Yuan, Ke Qiao, Kuaishe Wang, Shengyi Zhang, Pai Peng, Ting Zhang, Han Peng, Bing Qi Wu, Juan Yang (2020). Microstructure and nanomechanical behavior of friction stir welded joint of 7055 aluminum alloy. Journal of Manufacturing Processes.DOI
290. Pai Peng, Kuaishe Wang, Wen Wang, Tao Yang, Qiang Liu, Ting Zhang, Shengyi Zhang, Jun Cai, Ke Qiao, Liqiang Wang, Hongduo Wang, Jian Liu (2020). Intermetallic compounds: Formation mechanism and effects on the mechanical properties of friction stir lap welded dissimilar joints of magnesium and aluminum alloys. Materials Science and Engineering A.DOI
291. Bo-Liang Hu, Kuaishe Wang, Ping Hu, Hairui Xing, Shilei Li, Songwei Ge, Jiayu Han, Xing-Jiang Hua, Jingbo Fu, Alex A. Volinsky (2020). Secondary phases effects on microstructure and mechanical properties of lanthanum-doped titanium‑zirconium‑molybdenum alloy. International Journal of Refractory Metals and Hard Materials.DOI
292. Kuaishe Wang, Kuaishe Wang, Bing Wu, Ke Qiao, Hongduo Wang, Han Peng, Pai Peng, Peng Han, Liqiang Wang, Chenxi Wang, Shanyong Chen, Wen Wang, Liqiang Wang, Qiang Meng, Huaxia Zhao, Wen Wang (2020). Microstructure and mechanical properties of friction stir lap welded dissimilar zirconium-steel joint. Journal of Materials Research and Technology.DOI
293. Wei Wang, Ziru Han, Qingjuan Wang, Baojia Wei, Shewei Xin, Kuaishe Wang (2020). Influence of Heat Treatment on the Microstructure Evolution and Mechanical Properties of Graphene/Ti2AlNb Composites Synthesized via Spark Plasma Sintering. Journal of Materials Engineering and Performance.DOI
294. J.H. Chu, Libo Tong, Wenjingzi Wang, Z.H. Jiang, Ganghao Sun, De Ning Zou, Kuaishe Wang, Hongjie Zhang (2020). Sequentially bridged biomimetic graphene-based coating via covalent bonding with an effective anti-corrosion/wear protection for Mg alloy. Colloids and Surfaces A Physicochemical and Engineering Aspects.DOI
295. Qingjuan Wang, Tingli Hou, Wei Wang, Guoliang Zhang, Yuan Gao, Kuaishe Wang (2020). Tribological properties of black phosphorus nanosheets as oil-based lubricant additives for titanium alloy-steel contacts. Royal Society Open Science.DOI
296. Wei Wang, Haixiong Zhou, Qingjuan Wang, Ziru Han, Kuaishe Wang (2020). Preparation and Tribological Behavior of Ti2AlNb/Ag Self-Lubricating Composites. Journal of Materials Engineering and Performance.DOI
297. Ping Hu, Quan Cheng, Shilei Li, Hairui Xing, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Bo-Liang Hu, Kuaishe Wang, Laiping Li (2020). Rheological Behavior of Pure Molybdenum at High Temperature Considering Strain Compensation. Advanced Engineering Materials.DOI
298. Bo-Liang Hu, Kuaishe Wang, Ping Hu, Yutong Su, Shilei Li, Hairui Xing, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Jingbo Fu, Tian Chang (2020). Effect of secondary phases on the strength and elongation of a novel Mo-TiC-ZrC-C alloy. International Journal of Refractory Metals and Hard Materials.DOI
299. Hairui Xing, Ping Hu, Shilei Li, Ye-gai Zuo, Jiayu Han, Xing-Jiang Hua, Kuaishe Wang, Fan Yang, Pengfa Feng, Tian Chang (2020). Adsorption and diffusion of oxygen on metal surfaces studied by first-principle study: A review. Journal of Material Science and Technology.DOI
300. Xiaobo Zheng, Ting Zhang, Hejie Yang, Qiaoling Zheng, Yimin Gao, Zhiwei Liu, Wen Wang, Kuaishe Wang (2020). Friction stir processing induced elctrochemical performance improvement of commercial Al for Al-air battery. Electrochimica Acta.DOI
301. Wen Wang, Han Peng, Yinghui Wang, Ting Zhang, Pai Peng, Ke Qiao, Zhi Wang, Zhihao Liu, Kuaishe Wang (2020). High-performance bulk pure Al prepared through cold spray-friction stir processing composite additive manufacturing. Journal of Materials Research and Technology.DOI
302. Wen Wang, Shengyi Zhang, Ke Qiao, Kuaishe Wang, Pai Peng, Shengnan Yuan, Shanyong Chen, Ting Zhang, Qiang Wang, Tie Liu, Qi Yang (2020). Microstructure and mechanical properties of friction stir welded joint of TRIP steel. Journal of Manufacturing Processes.DOI
303. Hairui Xing, Ping Hu, Yuhang Zhou, Shilei Li, Ye-gai Zuo, Quan Cheng, Kuaishe Wang, Fan Yang, Pengfa Feng, Tian Chang (2020). The microstructure and texture evolution of pure molybdenum sheets under various rolling reductions. Materials Characterization.DOI
304. Wen Wang, Han Peng, Pai Peng, Hongju Guo, Liying Huang, Ke Qiao, Minna Hai, Qi Yang, Hongduo Wang, Kuaishe Wang, Liqiang Wang (2020). Superplastic deformation behavior of fine-grained AZ80 magnesium alloy prepared by friction stir processing. Journal of Materials Research and Technology.DOI
305. Pai Peng, Kuaishe Wang, Wen Wang, Han Peng, Ting Zhang, Qiang Liu, Shengyi Zhang, Hongduo Wang, Ke Qiao, Jian Liu (2020). Relationship between microstructure and mechanical properties of friction stir processed AISI 316L steel produced by selective laser melting. Materials Characterization.DOI
306. Fan Yang, Kuaishe Wang, Ping Hu, Xiaoyu Wang, Tian Chang, Zhenyu Chen, Jie Deng, Pengfa Feng, Alex A. Volinsky (2020). Detonation exfoliated mechanism of graphene-like MoS2 prepared by the intercalation-detonation method and promising exfoliation for 2D materials. Applied Surface Science.DOI
307. Wei Wang, Haixiong Zhou, Qingjuan Wang, Yuan Gao, Kuaishe Wang (2020). Influence of Mechanical Alloying and Sintering Temperature on the Microstructure and Mechanical Properties of a Ti-22Al-25Nb Alloy. Journal of Materials Engineering and Performance.DOI
308. Wen Wang, Han Peng, Ke Qiao, Tianqi Li, Kuaishe Wang, Jun Cai, Liqiang Wang (2020). Effect of the rotation rate on the low-cycle fatigue behavior of friction-stir welded AZ31 magnesium alloy. Engineering Fracture Mechanics.DOI
309. Libo Tong, J.H. Chu, Wanting Sun, Z.H. Jiang, De Ning Zou, Kuaishe Wang, S. Kamado, Mingyi Y. Zheng (2020). Development of high-performance Mg–Zn–Ca–Mn alloy via an extrusion process at relatively low temperature. Journal of Alloys and Compounds.DOI
310. Chong Chang Yang, B.B. Wang, Bo Yu, L.H. Wu, P. Xue, X.M. Zhang, G.Z. He, D.R. Ni, B.L. Xiao, Kuaishe Wang, Z.Y. Ma (2020). High-cycle fatigue and fracture behavior of double-side friction stir welded 6082Al ultra-thick plates. Engineering Fracture Mechanics.DOI
311. 张志娟，张兵，尚筱迪，王秋雨，王乐，王快社（2019）. Ti/Ni多层复合材料界面扩散行为研究. 《稀有金属材料与工程》.
312. 乔柯，王快社，王文，李天麒，王强，喻海良（2019）. 搅拌摩擦焊接AZ31镁合金低周疲劳性能（英文）. 《稀有金属材料与工程》.
313. 孟强，车倩颖，王快社，张坤，王文，黄丽颖，彭湃，乔柯（2019）. 铝铜异种材料搅拌摩擦焊接接头微观组织与性能. 《材料导报》.
314. 胡旭坤，王快社，张鹏飞，徐滨，孙国成（2019）. 锆合金相变温度的测定与分析. 《热加工工艺》.DOI
315. Ting Zhang, Qing Fan, Xiaoli Ma, Wen Wang, Kuaishe Wang, Pingquan Shen, Junlin Yang (2019). Microstructure and Mechanical Properties of Ti-35Nb-2Ta-3Zr Alloy by Laser Quenching. Frontiers in Materials.DOI
316. Wen Wang, Han Peng, Pai Peng, Ting Zhang, Qiang Liu, Shengnan Yuan, Liying Huang, Hailiang Yu, Ke Qiao, Kuaishe Wang (2019). Friction Stir Processing of Magnesium Alloys: A Review. Acta Metallurgica Sinica (English Letters).DOI
317. Yu Xia, Ping Hu, Kuaishe Wang, Shilei Li, Hairui Xing, Tian Chang, Pengfa Feng, Laiping Li (2019). Microstructure and texture evolution of pure molybdenum during hot deformation. Materials Characterization.DOI
318. Chunguang Yang, Junfan Zhang, Guannan Ma, L.H. Wu, X.M. Zhang, G.Z. He, P. Xue, D.R. Ni, Bin Xiao, Kuaishe Wang, Z.Y. Ma (2019). Microstructure and mechanical properties of double-side friction stir welded 6082Al ultra-thick plates. Journal of Material Science and Technology.DOI
319. Qingjuan Wang, Xiang-Jun Li, Kuaishe Wang, Bing Zhang, Jun Cai, Libo Tong, Yaojia Ren, Zhouyu Zeng, Jun Dang (2019). Elevated Temperature Compression Deformation Behavior of Commercial Pure Zr Combined with the Constitutive Equation and Processing Map. Advanced Engineering Materials.DOI
320. Wen Wang, Han Peng, Jie Yuan, Pai Peng, Qiang Liu, Fei Qiang, Ke Qiao, Kuaishe Wang (2019). Enhanced Mechanical Properties of Pure Zirconium via Friction Stir Processing. Acta Metallurgica Sinica (English Letters).DOI
321. Liying Huang, Kuaishe Wang, Wen Wang, Pai Peng, Ke Qiao, Qiang Liu (2019). Microstructural evolution and corrosion behavior of friction stir processed fine‐grained AZ80 Mg alloy. Materials and Corrosion.DOI
322. Shulin Dong, Tie Liu, Meng Dong, Shuang Wang, Wen Wang, Kuaishe Wang, Qiang Wang (2019). Crystallographic orientation of primary and eutectic phases in a hypoeutectic Mn–Sb alloy induced by solidification in high magnetic fields. Journal of Applied Crystallography.DOI
323. Ting Zhang, Qing Fan, Xiaoli Ma, Wen Wang, Kuaishe Wang, Pingquan Shen, Junlin Yang, Liqiang Wang (2019). Effect of laser remelting on microstructural evolution and mechanical properties of Ti-35Nb-2Ta-3Zr alloy. Materials Letters.DOI
324. Hongduo Wang, Kuaishe Wang, Wen Wang, Liying Huang, Pai Peng, Hailiang Yu (2019). Microstructure and mechanical properties of dissimilar friction stir welded type 304 austenitic stainless steel to Q235 low carbon steel. Materials Characterization.DOI
325. Bing Zhang, Zhijuan Zhang, Tianli Zhao, Dong Zhang, Jian Bing Cheng, Wen Wang, Ke Qiao, Yan Ru Yang, Kuaishe Wang (2019). Effect of temperature on the interfacial evolution of Ti/Ni multi-layered composites fabricated by ARB. Journal of Alloys and Compounds.DOI
326. Bo-Liang Hu, Kuaishe Wang, Ping Hu, Shilei Li, Jie Deng, Ye-gai Zuo, Hairui Xing, Pengfa Feng, Vladislav Paley, Alex A. Volinsky (2019). Fracture behavior of the La-doped molybdenum-titanium-zirconium alloy. Materials Science and Engineering A.DOI
327. Liqiang Wang, Lechun Xie, Pinquan Shen, Qing Fan, Wen Wang, Kuaishe Wang, Weijie Lü, Lin Hua, Lai‐Chang Zhang (2019). Surface microstructure and mechanical properties of Ti-6Al-4V/Ag nanocomposite prepared by FSP. Materials Characterization.DOI
328. Qiang Wang, Rui Si Xing, Qing-Juan Wang, Yu Bai, Zhongze Du, Wenjuan Niu, Wei Wang, Kuaishe Wang, Yuan Gao (2019). Bonding and wear behaviors of supersonic plasma sprayed Fe-based coatings on Al-Si alloy substrate. Surface and Coatings Technology.DOI
329. Qianying Che, Kuaishe Wang, Wen Wang, Liying Huang, Tianqi Li, Xiao-Peng Xi, Pai Peng, Ke Qiao (2019). Microstructure and mechanical properties of magnesium–lithium alloy prepared by friction stir processing. Rare Metals.DOI
330. Hao Gu, Zihao Ding, Zhi Yang, Weiqiang Yu, Wenjie Zhang, Weijie Lü, Lai‐Chang Zhang, Kuaishe Wang, Liqiang Wang, Yuanfei Fu (2019). Microstructure evolution and electrochemical properties of TiO2/Ti-35Nb-2Ta-3Zr micro/nano-composites fabricated by friction stir processing. Materials & Design.DOI
331. Yuanyuan Jin, Kuaishe Wang, Wen Wang, Pai Peng, Sha Zhou, Liying Huang, Tao Yang, Ke Qiao, Bing Zhang, Jun Cai, Hailiang Yu (2019). Microstructure and mechanical properties of AE42 rare earth-containing magnesium alloy prepared by friction stir processing. Materials Characterization.DOI
332. Liying Huang, Kuaishe Wang, Wen Wang, Kai Zhao, Jie Yuan, Ke Qiao, Bing Zhang, Jun Cai (2019). Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing. International Journal of Minerals Metallurgy and Materials.DOI
333. Tao Yang, Kuaishe Wang, Wen Wang, Pai Peng, Liying Huang, Ke Qiao, Yuanyuan Jin (2019). Effect of Friction Stir Processing on Microstructure and Mechanical Properties of AlSi10Mg Aluminum Alloy Produced by Selective Laser Melting. JOM.DOI
334. J.H. Chu, Libo Tong, Mao Wen, Z.H. Jiang, Kuaishe Wang, Hongjie Zhang (2019). Graphene oxide film as a protective barrier for Mg alloy: Worse or better is dependent on a chemical reduction process. Carbon.DOI
335. Bing Zhang, Xiaodi Shang, Su Juan Yao, Qiuyu Wang, Zhijuan Zhang, Xiaokang Yang, Jun Cai, Kuaishe Wang (2019). A Comparative Study on Johnson–Cook, Modified Johnson–Cook, Modified Zerilli–Armstrong and Arrhenius-Type Constitutive Models to Predict Hot Deformation Behavior of TA2. High Temperature Materials and Processes.DOI
336. 杨晓康，王快社，史佳敏，蔡军，王萌，王庆娟，刘莹莹，王文（2018）. TC17钛合金高温变形行为研究. 《稀有金属材料与工程》.
337. 周宇航，胡平，常恬，邓洁，胡卜亮，王快社，冯鹏发（2018）. 钼合金强韧化方式及机理研究进展. 《功能材料》.
338. 杨晓康，王快社，王萌，蔡军（2018）. TC17钛合金热变形行为及其修正J-C本构模型. 《金属热处理》.
339. 袁洁，赵凯，王快社，王文，黄丽颖（2018）. 搅拌摩擦加工Q235低碳钢的组织与性能. 《金属热处理》.
340. 王洪铎，王文，李霄，王快社（2018）. 亚共析钢搅拌摩擦加工组织与力学性能. 《焊接学报》.
341. X. H. Zeng, P. Xue, L.H. Wu, D.R. Ni, B.L. Xiao, Kuaishe Wang, Z.Y. Ma (2018). Microstructural evolution of aluminum alloy during friction stir welding under different tool rotation rates and cooling conditions. Journal of Material Science and Technology.DOI
342. Wei Wang, Haixiong Zhou, Qingjuan Wang, Jie Jin, Yaling Sun, Kuaishe Wang (2018). High-Temperature Tribological Behavior of the Ti-22Al-25Nb (at. %) Orthorhombic Alloy with Lamellar O Microstructures. Metals.DOI
343. Jun Cai, Meng Wang, Jiamin Shi, Kuaishe Wang, Wen Wang (2018). A Constitutive Equation for Predicting Elevated Temperature Flow Behavior of BFe10-1-2 Cupronickel Alloy through Double Multiple Nonlinear Regression. High Temperature Materials and Processes.DOI
344. Yan Wang, Bruno Lebon, Iakovos Tzanakis, Yongli Zhao, Kuaishe Wang, Jorge Stella, Thierry Poirier, Geoffrey Darut, Hanlin Liao, Marie-Pierre Planche (2018). Experimental and numerical investigation of cavitation-induced erosion in thermal sprayed single splats. Ultrasonics Sonochemistry.DOI
345. Yan Wang, Yongli Zhao, Geoffrey Darut, Thierry Poirier, Jorge Stella, Kuaishe Wang, Hanlin Liao, Marie-Pierre Planche (2018). A novel structured suspension plasma sprayed YSZ-PTFE composite coating with tribological performance improvement. Surface and Coatings Technology.DOI
346. Zhi Yang, Hao Gu, Gang Sha, Weijie Lü, Weiqiang Yu, Wenjie Zhang, Yuanfei Fu, Kuaishe Wang, Liqiang Wang (2018). TC4/Ag Metal Matrix Nanocomposites Modified by Friction Stir Processing: Surface Characterization, Antibacterial Property, and Cytotoxicity in Vitro. ACS Applied Materials & Interfaces.DOI
347. Pai Peng, Kuaishe Wang, Wen Wang, Liying Huang, Ke Qiao, Qianying Che, Xiaopeng Xi, Bing Zhang, Jun Cai (2018). High-performance aluminium foam sandwich prepared through friction stir welding. Materials Letters.DOI
348. Q. Shang, D.R. Ni, P. Xue, Bin Xiao, Kuaishe Wang, Z.Y. Ma (2018). An approach to enhancement of Mg alloy joint performance by additional pass of friction stir processing. Journal of Materials Processing Technology.DOI
349. Chen Yang, D.R. Ni, P. Xue, Bin Xiao, Wenjingzi Wang, Kuaishe Wang, Z.Y. Ma (2018). A comparative research on bobbin tool and conventional friction stir welding of Al-Mg-Si alloy plates. Materials Characterization.DOI
350. Qiang Wang, Qi Sun, Mingxing Zhang, Wenjuan Niu, Changbin Tang, Kuaishe Wang, Rui Si Xing, Le Zhai, Lu Wang (2018). The influence of cold and detonation thermal spraying processes on the microstructure and properties of Al-based composite coatings on Mg alloy. Surface and Coatings Technology.DOI
351. Lechun Xie, Liqiang Wang, Kuaishe Wang, Guilin Yin, Yuanfei Fu, Di Zhang, Weijie Lü, Lin Hua, Lai‐Chang Zhang (2018). TEM characterization on microstructure of Ti–6Al–4V/Ag nanocomposite formed by friction stir processing. Materialia.DOI
352. Liying Huang, Kuaishe Wang, Wen Wang, Jie Yuan, Ke Qiao, Tao Yang, Pai Peng, Tianqi Li (2018). Effects of grain size and texture on stress corrosion cracking of friction stir processed AZ80 magnesium alloy. Engineering Failure Analysis.DOI
353. Jie Deng, Kuaishe Wang, Ping Hu, Yuhang Zhou, Tian Chang, Bo-Liang Hu, Pengfa Feng, Rui Song, Geng An (2018). Electrochemical behavior and microstructural characterization of lanthanum-doped titanium-zirconium-molybdenum alloy. Journal of Alloys and Compounds.DOI
354. X. H. Zeng, P. Xue, D. Wang, D.R. Ni, B.L. Xiao, Kuaishe Wang, Z.Y. Ma (2018). Material flow and void defect formation in friction stir welding of aluminium alloys. Science and Technology of Welding & Joining.DOI
355. Bo-Liang Hu, Kuaishe Wang, Ping Hu, Yuhang Zhou, Jie Deng, Wenjing Chen, Pengfa Feng, Zhang Ju-ping, Alex A. Volinsky, Hailiang Yu (2018). Secondary phases formation in lanthanum-doped titanium-zirconium-molybdenum alloy. Journal of Alloys and Compounds.DOI
356. Ruoshi Ran, Yiwei Liu, Liqiang Wang, Eryi Lu, Lechun Xie, Weijie Lü, Kuaishe Wang, Lai‐Chang Zhang (2018). α″ Martensite and Amorphous Phase Transformation Mechanism in TiNbTaZr Alloy Incorporated with TiO2 Particles During Friction Stir Processing. Metallurgical and Materials Transactions A.DOI
357. Ping Hu, Yuhang Zhou, Jie Deng, Shilei Li, Wenjing Chen, Tian Chang, Bo-Liang Hu, Kuaishe Wang, Pengfa Feng, Alex A. Volinsky (2018). Crack initiation mechanism in lanthanum-doped titanium-zirconium-molybdenum alloy during sintering and rolling. Journal of Alloys and Compounds.DOI
358. Liying Huang, Kuaishe Wang, Wen Wang, Kai Zhao, Jie Yuan, Qiang Wang, Ke Qiao, Jun Cai (2018). Corrosion properties of low carbon steel prepared by submerged friction stir processing. Materials and Corrosion.DOI
359. 王艺超，谢英杰，邢秋丽，杨建朝，王快社（2017）. 初始状态对形变及热处理后工业纯钛组织和力学性能的影响. 《材料科学与工程学报》.
360. 胡平，宋瑞，王快社，杨帆，胡卜亮，陈震宇，李秦伟，曹维成，刘东新，郭磊，喻海良（2017）. TZM合金电化学腐蚀行为研究（英文）. 《稀有金属材料与工程》.
361. 胡平，于志涛，王快社，杨帆，胡卜亮，宋瑞，谭江飞，曹维成，安耿，郭磊（2017）. TZM合金在酸、碱腐蚀介质中的腐蚀行为研究. 《稀有金属材料与工程》.
362. 王栓强，王快社，张金龙（2017）. 轻质高强层状复合材料研究现状. 《轻金属》.
363. Wen Wang, Ruiqi Xu, Yaxin Hao, Qiang Wang, Liang Yu, Qianying Che, Jun Cai, Kuaishe Wang, Z.Y. Ma (2017). Corrosion fatigue behavior of friction stir processed interstitial free steel. Journal of Material Science and Technology.DOI
364. Ping Hu, Lu Kang, Tian Chang, Fan Yang, Hua Wang, Yang Zhang, Jun Yang, Kuaishe Wang, Jinjing Du, Zhanlin Yang (2017). High saturation magnetization Fe3O4 nanoparticles prepared by one-step reduction method in autoclave. Journal of Alloys and Compounds.DOI
365. Ping Hu, Zhenyu Chen, Tian Chang, Jie Deng, Fan Yang, Kuaishe Wang, Wei Li, Bo-Liang Hu, Hailiang Yu, Wenpeng Wang (2017). Magnetic properties of the nanoscale coral-shaped Ni-Co alloy powder with different Co contents. Journal of Alloys and Compounds.DOI
366. Fan Yang, Kuaishe Wang, Ping Hu, Zhenyu Chen, Jie Deng, Bo-Liang Hu, Weicheng Cao, Dongxin Liu, Geng An, Alex A. Volinsky (2017). Oxidation layering mechanism of graphene-like MoS2 prepared by the intercalation-detonation method. Nano Research.DOI
367. Bing Zhang, Zhijuan Zhang, Zhang Xunhui, Su Juan Yao, Xiaodi Shang, Wen Wang, Le Wang, Kuaishe Wang (2017). Influence of interface microstructure on the mechanical properties of Ti/Ni multi-layered composites. Materials Science and Technology.DOI
368. Jun Cai, Jiamin Shi, Kuaishe Wang, Fuguo Li, Wen Wang, Qingjuan Wang, Ying‐Ying Liu (2017). A modified parallel constitutive model for elevated temperature flow behavior of Ti-6Al-4V alloy based on multiple regression. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
369. Ping Hu, Fan Yang, Jie Deng, Tian Chang, Bo-Liang Hu, Jiang-fei Tan, Kuaishe Wang, Weicheng Cao, Pengfa Feng, Hailiang Yu (2017). High temperature mechanical properties of TZM alloys under different lanthanum doping treatments. Journal of Alloys and Compounds.DOI
370. Jun Cai, Kuaishe Wang, Jiamin Shi, Wen Wang, Ying‐Ying Liu (2017). A Modified Double Multiple Nonlinear Regression Constitutive Equation for Modeling and Prediction of High Temperature Flow Behavior of BFe10-1-2 Alloy. High Temperature Materials and Processes.DOI
371. Ping Hu, Rui Song, Xiaojing Li, Jie Deng, Zhen‐Yu Chen, Qin-wei Li, Kuaishe Wang, Wei-cheng Cao, Dongxin Liu, Hailiang Yu (2017). Influence of concentrations of chloride ions on electrochemical corrosion behavior of titanium-zirconium-molybdenum alloy. Journal of Alloys and Compounds.DOI
372. Ping Hu, Rui Song, Jie Deng, Zhen‐Yu Chen, Qinwei Li, Bo-Liang Hu, Kuaishe Wang, Wei-cheng Cao, Dongxin Liu, Hailiang Yu (2017). Electrochemical corrosion behavior of platinum-coated lanthanum doped titanium-zirconium-molybdenum alloy. Journal of Alloys and Compounds.DOI
373. Ping Hu, Yuhang Zhou, Tian Chang, Zhitao Yu, Kuaishe Wang, Fan Yang, Bo-Liang Hu, Weicheng Cao, Hailiang Yu (2017). Investigation on compression behavior of TZM and La 2 O 3 doped TZM Alloys at high temperature. Materials Science and Engineering A.DOI
374. Jun Cai, Kuaishe Wang, Bing Zhang, Wen Wang (2017). Study on the Influence of Processing Parameters on Piercing Extrusion Process of Large Diameter Cupronickel Alloy Pipes Using 3D FEM Analysis. Advances in Materials Science and Engineering.DOI
375. 高雪，张郑，王文，海敏娜，贾少伟，王快社（2016）. 搅拌摩擦加工AZ31细晶镁合金超塑性行为. 《稀有金属材料与工程》.
376. 郭洪举，王文，李天麒，贾少伟，乔柯，王快社（2016）. 变形速率对搅拌摩擦加工镁合金变形行为的影响. 《材料导报》.
377. 胡平，康路，杨军，杨帆，王快社，杜金晶，杨占林，曹维成，刘东新（2016）. 一步还原法制备纳米铁粉（英文）. 《稀有金属材料与工程》.
378. 蔡军，王快社，王文（2016）. 利用本构方程和加工图表征BFe10-1-2白铜合金的热变形行为（英文）. 《稀有金属材料与工程》.
379. 张兵，王乐，张巡辉，张仁杰，张志娟，王快社（2016）. 累积叠轧制备Ti/Ni多层复合材料的组织演变与力学性能. 《稀有金属材料与工程》.
380. 刘晓平，王快社，胡平，陈强（2016）. 感应等离子体制备高纯致密球形钼粉研究. 《稀有金属材料与工程》.
381. 乔柯，王文，吴楠，李天麒，王快社（2016）. 焊接速度对铝铜复合板搅拌摩擦焊接接头的影响. 《金属热处理》.
382. 郝亚鑫，王文，徐瑞琦，乔柯，李天麒，王快社（2016）. 焊后热处理对7A04铝合金水下搅拌摩擦焊接接头组织性能的影响. 《材料工程》.
383. Ping Hu, Tian Chang, Zhitao Yu, Fan Yang, Bo-Liang Hu, Yuhang Zhou, Kuaishe Wang, Wei-cheng Cao, Dongxin Liu, Alex A. Volinsky (2016). Synthesis of hypoxia-high density TZM alloy based on mechanochemistry and particle size distribution theories. Journal of Alloys and Compounds.DOI
384. Bo-Liang Hu, Kuaishe Wang, Ping Hu, Yuhang Zhou, Fan Yang, Qin-wei Li, Wei-cheng Cao, Dongxin Liu, Liu Ren-zhi, Hailiang Yu (2016). Effect of lanthanum in arc erosion of Titanium-Zirconium-Molybdenum alloy. Journal of Alloys and Compounds.DOI
385. Fan Yang, Ping Hu, Kuaishe Wang, Zhenyu Chen, Bo-Liang Hu, Rui Song, Wei Li, Wei-Cheng Cao, Dongxin Liu, Geng An, Zhou-Yue Jiang, Yifei Li, Alex A. Volinsky (2016). Graphene-like MoS 2 prepared by a novel intercalation-detonation method. Materials Letters.DOI
386. Ping Hu, Bo-Liang Hu, Kuaishe Wang, Rui Song, Fan Yang, Zhitao Yu, Jiang-fei Tan, Wei-cheng Cao, Dongxin Liu, Geng An, Lei Guo, Hailiang Yu (2016). Strengthening and elongation mechanism of Lanthanum-doped Titanium-Zirconium-Molybdenum alloy. Materials Science and Engineering A.DOI
387. Jun Cai, Kuaishe Wang, Xiaolu Zhang, Wen Wang (2016). Characterization of High Temperature Deformation Behavior of BFe10-1-2 Cupronickel Alloy Using Orthogonal Analysis. High Temperature Materials and Processes.DOI
388. Wenjingzi Wang, Ke Qiao, Jiaqi Wu, T.Q. Li, Jun Cai, Kuaishe Wang (2016). Fatigue properties of friction stir welded joint of ultrafine-grained 2024 aluminium alloy. Science and Technology of Welding & Joining.DOI
389. Ping Hu, Fan Yang, Rui Song, Kuaishe Wang, Bo-Liang Hu, Wei-Cheng Cao, Dong-Xin Liu, Xuan-Qi Kang, Alex A. Volinsky (2016). Pt-plating effect on La-TZM alloy high temperature oxidation behavior. Journal of Alloys and Compounds.DOI
390. Ping Hu, Bo-Liang Hu, Kuaishe Wang, Fan Yang, Rui Song, Zhitao Yu, Qiang Wang, Wei-Cheng Cao, Dong-Xin Liu, Geng An, Lei Guo, Hailiang Yu (2016). Arc erosion behavior of La-doping titanium-zirconium-molybdenum alloy. Journal of Alloys and Compounds.DOI
391. Jun Cai, Ying Lei, Kuaishe Wang, Xiaolu Zhang, Chengpeng Miao, Wenbing Li (2016). A Comparative Investigation on the Capability of Modified Zerilli-Armstrong and Arrhenius-Type Constitutive Models to Describe Flow Behavior of BFe10-1-2 Cupronickel Alloy at Elevated Temperature. Journal of Materials Engineering and Performance.DOI
392. Jun Cai, Xiaolu Zhang, Kuaishe Wang, Chengpeng Miao (2016). Physics-Based Constitutive Model to Predict Dynamic Recovery Behavior of BFe10-1-2 Cupronickel Alloy during Hot Working. High Temperature Materials and Processes.DOI
393. Wen Wang, Tianqi Li, Kuaishe Wang, Jun Cai, Ke Qiao (2016). Effect of Travel Speed on the Stress Corrosion Behavior of Friction Stir Welded 2024-T4 Aluminum Alloy. Journal of Materials Engineering and Performance.DOI
394. 康轩齐，王快社，张郑，胡平，何欢承，刘仁智，王鹏洲（2015）. 掺镧方式对La-TZM合金性能的影响. 《稀有金属材料与工程》.
395. 刘晓平，王快社，胡平，陈强（2015）. 感应等离子体工艺对制备致密球形钼粉的影响. 《金属热处理》.
396. 王敬忠，刘正东，包汉生，王快社（2015）. 中国超超临界电站锅炉关键材料用钢及合金的研究现状. 《钢铁》.
397. 王文，李瑶，郝亚鑫，王庆娟，王快社，海敏娜（2015）. 强制冷却对TC4钛合金搅拌摩擦焊接接头组织性能影响. 《稀有金属材料与工程》.
398. 张兵，林兆霞，郭强，王文，朱乐乐，王快社（2015）. 强制冷却搅拌摩擦加工2024铝合金晶粒特征. 《稀有金属材料与工程》.
399. 何欢承，王快社，胡平，康轩齐，王鹏洲，刘仁智（2015）. 掺杂稀土元素镧对TZM合金板材再结晶行为的影响. 《稀有金属材料与工程》.
400. 张兵，朱乐乐，王快社，王文，郝亚鑫（2015）. 纯镍的高温塑性变形行为及本构方程. 《稀有金属》.
401. 海敏娜，王快社，王文，郝亚鑫，徐瑞琦，李瑶（2015）. 纯锆R60702板材焊接接头的腐蚀性能研究. 《稀有金属》.
402. Xiaoping Liu, Kuaishe Wang, Ping Hu, Qiang Chen, Alex A. Volinsky (2015). Spheroidization of molybdenum powder by radio frequency thermal plasma. International Journal of Minerals Metallurgy and Materials.DOI
403. Ping Hu, Fan Yang, Kuaishe Wang, Zhitao Yu, Jiang-fei Tan, Rui Song, Bo-Liang Hu, Hua Wang, Huan-Cheng He, Alex A. Volinsky (2015). Preparation and ductile-to-brittle transition temperature of the La-TZM alloy plates. International Journal of Refractory Metals and Hard Materials.DOI
404. Jun Cai, Kuaishe Wang, Yingying Han (2015). A Comparative Study on Johnson Cook, Modified Zerilli–Armstrong and Arrhenius-Type Constitutive Models to Predict High-Temperature Flow Behavior of Ti–6Al–4V Alloy in α + β Phase. High Temperature Materials and Processes.DOI
405. Kuaishe Wang, Jiang-fei Tan, Ping Hu, Zhitao Yu, Fan Yang, Bo-Liang Hu, Rui Song, Huan-Cheng He, Alex A. Volinsky (2015). La2O3 effects on TZM alloy recovery, recrystallization and mechanical properties. Materials Science and Engineering A.DOI
406. 何欢承，王快社，胡平，康轩齐，王鹏洲，刘仁智（2014）. 掺镧TZM合金板材断口形貌和组织分析. 《稀有金属材料与工程》.
407. 王文，李瑶，王庆娟，王快社，海敏娜（2014）. TC4钛合金搅拌摩擦焊接接头组织转变特征. 《稀有金属材料与工程》.
408. 胡平，王快社，杨帆，何欢承，康轩齐，王华，于志涛，谭江飞（2014）. 有机碳源替代石墨制备TZM合金及其性能研究. 《稀有金属材料与工程》.
409. 胡平，王快社，杨帆，何欢承，康轩齐，王华，于志涛，谭江飞（2014）. La-TZM合金板材制备及其氧化行为. 《稀有金属材料与工程》.
410. 何欢承，王快社，胡平，康轩齐，王鹏洲，刘仁智（2014）. La2O3对TZM合金再结晶温度的影响. 《金属热处理》.
411. 刘仁智，王快社，孙院军，安耿（2014）. 不同团聚态钼粉制备板材的织构分析. 《粉末冶金技术》.
412. 刘仁智，王快社，孙院军（2014）. 钼靶材变形量及热处理对薄膜微观组织及性能的影响. 《粉末冶金技术》.
413. 海敏娜，曾永团，王文，李军献，苑晓刚，张永强，刘继雄，熊富仓，王快社（2014）. 工业级锆及锆合金焊接的最新研究进展. 《焊接技术》.
414. 孙美娜，王快社，徐瑞琦，王文，郝亚鑫，李瑶（2014）. 搅拌摩擦加工超细晶2024铝合金热稳定性研究. 《稀有金属》.
415. Jun Cai, Kuaishe Wang, Peng Cheng Zhai, Fuguo Li, Jie Yang (2014). A Modified Johnson-Cook Constitutive Equation to Predict Hot Deformation Behavior of Ti-6Al-4V Alloy. Journal of Materials Engineering and Performance.DOI
416. Jun Cai, Kuaishe Wang, Chengpeng Miao, Wenbing Li, Wen Wang, Jie Yang (2014). Constitutive analysis to predict high-temperature flow behavior of BFe10-1-2 cupronickel alloy in consideration of strain. Materials & Design (1980-2015).DOI
417. Fan Yang, Kuaishe Wang, Ping Hu, Huan-Cheng He, Xuan-Qi Kang, Hua Wang, Liu Ren-zhi, Alex A. Volinsky (2014). La doping effect on TZM alloy oxidation behavior. Journal of Alloys and Compounds.DOI
418. 王快社（2013）. 材料加工工程科技英语 = Special English for material processing engineering. 《冶金工业出版社》.
419. 王快社，王峰，张兵，林兆霞，孔亮，郭韡（2013）. Cu/Mo/Cu复合板界面变形及厚度配比. 《稀有金属材料与工程》.
420. 王快社，孔亮，王文，林兆霞，王峰（2013）. 强制冷却搅拌摩擦加工2024铝合金的组织性能研究. 《稀有金属材料与工程》.
421. 王快社，吴楠，王文，丁凯，郭强（2013）. 2024-T4铝合金水下搅拌摩擦焊接研究. 《稀有金属材料与工程》.
422. 胡平，王快社，康轩齐，何欢承，杨锋，王鹏洲，王华（2013）. 轧制方式对La-TZM合金板材力学性能的影响. 《金属热处理》.
423. 胡平，王快社，何欢承，杨帆，杨锋，康轩齐，王鹏洲，王华（2013）. TZM合金板材的制备及其再结晶行为. 《金属热处理》.
424. 王庆娟，高颀，王快社，王鼎春，李献民，丁长勤，石卫民（2013）. d-电子合金理论在钛合金设计中的应用. 《热加工工艺》.
425. 王快社，吴楠，王文，丁凯，郭强（2013）. 转速对2024-T4铝合金水下搅拌摩擦焊接接头组织与性能的影响. 《中国有色金属学报》.
426. Liu Ren-zhi, Kuaishe Wang, Pengfa Feng, Geng An, Qin-Li Yang, Hu Zhao (2013). Microstructure and tensile properties of Mo alloy synthetically strengthened by nano‐Y 2 O 3 and nano‐CeO 2. Rare Metals.DOI
427. Ping Hu, Kuaishe Wang, Huan Cheng He, Xuan-Qi Kang, Hua Wang, Peng Zhou Wang (2013). Preparation and Properties of La-TZM Alloy Plates. Applied Mechanics and Materials.DOI
428. 刘仁智，孙院军，王快社，安耿，李晶，王引婷（2012）. Mo靶材组织对溅射薄膜形貌及性能的影响. 《稀有金属材料与工程》.
429. 王文，王快社，郭强，吴楠（2012）. 搅拌摩擦加工铸态AZ31镁合金组织性能研究(英文). 《稀有金属材料与工程》.
430. 王鹏洲，王快社，张郑，胡平，刘仁智，康轩齐，何欢承（2012）. 掺镧TZM合金的组织结构. 《金属热处理》.
431. 王快社，周龙海，武佳蕾，王文（2012）. AZ31B镁合金水环境搅拌摩擦焊接研究. 《稀有金属材料与工程》.
432. 王快社，林兆霞，周龙海，孔亮，王文（2012）. 搅拌摩擦加工铸态铝铁合金的显微组织. 《中国有色金属学报》.
433. 杨洪波，王快社，王庆娟，朱伏先（2012）. GCr15轴承钢渗碳体球化的长大机制. 《材料热处理学报》.
434. 吴楠，王文，丁凯，王快社（2012）. 焊速对水下搅拌摩擦焊接铝合金组织性能的影响. 《兵器材料科学与工程》.
435. 王文，吴楠，孙美娜，王快社（2012）. 冷却介质对搅拌摩擦焊接铝合金焊核区组织性能影响. 《兵器材料科学与工程》.
436. 王峰，王快社，马林生，张兵，孔亮，林兆霞（2012）. 核级锆及锆合金研究状况及发展前景. 《兵器材料科学与工程》.
437. Kuaishe Wang, Jia-lei Wu, Wen Wang, Long-hai Zhou, Zhao-xia Lin, Liang Kong (2012). Underwater friction stir welding of ultrafine grained 2017 aluminum alloy. Journal of Central South University.DOI
438. Kuaishe Wang (2012). Effect of cooling medium on the microstructure and property of the nugget zone in friction stir welded aluminum alloy. Ordnance Material Science and Engineering.
439. Kuaishe Wang (2012). Microstructure of friction stir processed as-cast Al-Fe alloy. The Chinese Journal of Nonferrous Metals.
440. Kuaishe Wang (2012). Effect of welding speed on the microstructure and property of submerged friction stir welded aluminum alloy. Ordnance Material Science and Engineering.
441. 郭韡，王快社，王文，王峰，王文礼（2011）. 焊后热处理对镁合金搅拌摩擦焊接接头的影响. 《稀有金属材料与工程》.
442. 王快社，马宏刚，王文，郭韡（2011）. TA2工业纯钛表面搅拌摩擦加工组织及性能. 《稀有金属材料与工程》.
443. 王文礼，王文，王快社（2011）. Mg-Y-Ca-Zr合金板带材轧制实验研究. 《铸造技术》.
444. 张兵，王快社，孙院军，王莎（2011）. Cu/Mo/Cu轧制复合界面的结合特性. 《中国有色金属学报》.
445. Gui Zhi Xiao, Kuaishe Wang, Fu Xian Zhu, Hong Shuang Di (2011). Development of Direct Quenching Process for SPV490Q Steel Plate. Advanced materials research.DOI
446. Hong Bo Yang, Fu Xian Zhu, Xianghua Liu, Kuaishe Wang (2011). Effect of Divorced Eutectoid Transformation Temperature on Behaviour of Cementite Growth in GCr15 Steel. Advanced materials research.DOI
447. 张兵，孙院军，王快社，王莎（2010）. Cu/Mo/Cu轧制复合界面结合特性研究. 《第二届层压金属复合材料生产技术开发与应用学术研讨会文集》.
448. 王快社，王文，郭韡，张小龙，尹娟，王文礼（2010）. 搅拌摩擦焊与手工电弧焊接头电化学腐蚀性能研究. 《稀有金属材料与工程》.
449. 张娟，刘长瑞，王庆娟，王快社，马正强（2010）. 纯铝1A85连续变断面循环挤压过程的组织演变. 《材料科学与工程学报》.
450. 王莎，王快社，张兵，郭韡（2010）. 退火温度对Cu/Mo/Cu轧制复合板微观组织和力学性能的影响. 《稀有金属》.
451. W. L. Wang, Kuaishe Wang, Xin Lin (2010). Real time observation of nucleation and detachment of crystal from chilling surface Part I – effects of vibration. International Journal of Cast Metals Research.DOI
452. W. L. Wang, Kuaishe Wang, Xin Lin (2010). In situnucleation and detachment of dendrites to form equiaxed grains stirred by vibration. International Journal of Cast Metals Research.DOI
453. Kuaishe Wang (2010). Surface Modification of Magnesium Alloy Performed by Friction Stir Processing. Materials for Mechanical Engineering.
454. 王快社，张小龙，王训宏，徐可为（2009）. 搅拌摩擦与氩弧焊铝合金接头疲劳性能的比较. 《材料研究学报》.
455. 郭韡，王快社，王峰，王文，王文礼（2009）. 热处理对AZ31B镁合金搅拌摩擦焊焊接接头显微组织和显微硬度的影响. 《机械工程材料》.
456. 刘长瑞，王庆娟，杜忠泽，王快社，陈明（2009）. 连续变断面循环挤压制备细晶材料的新方法. 《稀有金属材料与工程》.
457. 郭韡，王快社，王文，王文礼（2009）. 搅拌摩擦加工铸态L2纯铝组织与性能研究. 《兵器材料科学与工程》.
458. 王快社，王训宏，王文，李有元，王勇（2009）. 0.2mm以下极薄料冷轧振动痕分析及对策. 《第七届(2009)中国钢铁年会大会论文集(中)》.
459. Wenli Wang, Kuaishe Wang, Xin Lin (2009). Crystal nucleation and detachment from a chilling metal surface with vibration. Materials Chemistry and Physics.DOI
460. Kuaishe Wang (2009). Resarch Progress of Stress Corrosion Behavior of Aluminum Alloys Friction Stir Welds. Rejiagong gongyi.
461. Kuaishe Wang (2009). Microstructure and properties of friction stir processed as-cast pure aluminum L2. Ordnance Material Science and Engineering.
462. Kuaishe Wang (2009). Effect of Accumulation of Friction Stir Processing on Microstructure and Properties of Cast Pure Aluminum L2. Hangkong cailiao xuebao.
463. 王文，王快社，武佳蕾，王文礼（2008）. H65铜合金搅拌摩擦焊接工艺研究. 《兵器材料科学与工程》.
464. 王快社，张小龙，沈洋，徐可为（2008）. TC4钛合金搅拌摩擦焊连接组织形貌研究. 《稀有金属材料与工程》.
465. 田景来，吕爽，王快社（2008）. 累积叠轧1060纯铝微观组织和力学性能的研究. 《铸造技术》.
466. 张娟，刘长瑞，王快社，任红霞（2008）. 制备块体细晶材料的大塑性变形方法. 《新技术新工艺》.
467. 王文，王快社，张兵，王文礼，王莎，姜炜（2008）. Cu/Mo/Cu电子封装材料复合轧制工艺研究. 《2008双（多）金属复合管/板材生产技术开发与应用学术研讨会》.
468. Xunhong Wang, Kuaishe Wang, Yang Shen, Kai Hu (2008). Comparison of fatigue property between friction stir and TIG welds. International Journal of Minerals Metallurgy and Materials.DOI
469. Kuaishe Wang (2008). Investigation on Microstructure and Mechanical Properties of 1060 Pure Aluminum after Accumulative Roll Bonding. Rejiagong gongyi.
470. 吕爽，王快社，刘明玮，张兵，李明山（2007）. 两种塑性变形加工1060纯铝的组织和性能研究. 《热加工工艺》.
471. 王快社，王训宏，苏晓莉，徐可为（2007）. 搅拌摩擦焊与氩弧焊接接头摩擦磨损性能研究. 《稀有金属材料与工程》.
472. 朱爱辉，王快社，吕新矿（2007）. 钼板轧制工艺的优化. 《机械工程材料》.
473. 王快社，王训宏，沈洋，徐可为，胡锴（2007）. 搅拌摩擦焊接接头的静载力学行为和疲劳特性. 《稀有金属材料与工程》.
474. 沈洋，王快社，吕爽，孙鹏（2007）. 7075铝合金搅拌摩擦焊研究. 《特种铸造及有色合金》.DOI
475. 王训宏，王快社，徐可为，徐烨明（2006）. LF2铝合金搅拌摩擦焊接接头磨损性能研究. 《轻金属》.
476. 王训宏，王快社，徐可为，胡锴（2006）. 搅拌摩擦焊接过程塑性流动形态与试验分析. 《兵器材料科学与工程》.
477. 朱爱辉，王快社，张兵（2006）. 钼在冶金工业中的应用. 《中国钼业》.
478. 朱爱辉，吕新矿，王快社（2006）. 钼板轧制实验研究. 《中国钼业》.
479. 王训宏，王快社（2006）. 搅拌摩擦焊的发展现状及存在的问题. 《焊接技术》.
480. 王训宏，王快社，沈洋，徐可为（2006）. 异种材料搅拌摩擦焊接头特点与脆性本征研究. 《焊接技术》.
481. 苏晓莉，王快社，周俊杰（2006）. 铝合金搅拌摩擦焊温度场检测. 《焊接技术》.
482. 朱爱辉，吕新矿，王快社（2006）. 轧制方式对Mo-1钼板组织和性能的影响. 《硬质合金》.
483. 王训宏，王快社，郑健峰，马叶红（2006）. 浅析铸造热轧带钢工作辊的剥落与断裂失效. 《甘肃冶金》.
484. 王训宏，王快社，沈洋，徐可为（2006）. 搅拌摩擦焊接头区域的摩擦磨损性能. 《热加工工艺(焊接版)》.
485. 王训宏，王快社，马叶红，袁嘉轩（2006）. 铸造热轧带钢工作辊的剥落失效与预防措施. 《铸造技术》.
486. 朱爱辉，吕新矿，王快社（2006）. 改善钼板轧制工艺提高钼板轧制质量. 《河南冶金》.
487. 王训宏，王快社，徐可为，胡锴（2006）. LF2铝合金搅拌摩擦焊接头的疲劳特性. 《特种铸造及有色合金》.DOI
488. 吕新矿，朱爱辉，王快社（2006）. 大尺寸Mo-1板轧制工艺研究. 《中国材料进展》.
489. 朱爱辉，吕新矿，王快社（2006）. 交叉轧制在Mo-1钼板生产中的应用. 《材料开发与应用》.
490. 王训宏，王快社，徐可为，王红霞（2006）. 工艺参数对ECAP镁合金焊接接头性能的影响. 《特种铸造及有色合金》.
491. Kuaishe Wang, Yang Shen, Xirong Yang, Xun-hong Wang, Kewei Xu (2006). Evaluation of Microstructure and Mechanical Property of FSW Welded MB3 Magnesium Alloy. Journal of Iron and Steel Research International.DOI
492. Kuaishe Wang (2006). Status quo and problems of friction stir welding. Welding Technology.
493. 王快社，沈洋，王训宏，徐可为（2005）. 1060/3003 铝合金搅拌摩擦焊焊接接头材料流动规律研究(英文). 《稀有金属材料与工程》.
494. 王快社，刘军帅，徐可为，沈洋（2004）. MB3镁合金固态塑性连接组织性能研究. 《稀有金属材料与工程》.
495. 王快社（2001）. 母材情况对冷轧带肋钢筋质量的影响. 《钢铁研究》.

预印本

1. Zhuang Sun, Wei Wang, Zelei Xie, Fanfan Lv, Binglong Zhang, Yuan GAO, Qianying Jia, Jiayu Yang, Kuaishe Wang (2026). High-temperature tribological behavior of sodium silicate composite coatings with Bi2O3–WO3 additions on the surface of Ti-6Al-4V alloy. SSRN Electronic Journal.DOI
2. Bing Zhang, Zhijuan Zhang, Zhaolin Wang, Zhaolin Wang, Zhiqiang Lei, Shancheng Zhan, Kuaishe Wang (2025). Effects of Layer Thickness Ratio on Deformation Coordination and Dynamic Softening Mechanisms of Hot-Compressed 1060al/Sic-6061al/1060al Composites. SSRN Electronic Journal.DOI
3. Chi Xu, Weitao Yang, Yixing Ma, Qi Yang, Kuaishe Wang (2024). A Microstructural Study of Ductile Martensitic Interface in a Multilayered Steel Composite. SSRN Electronic Journal.DOI
4. Xinyu Wu, Fengming Qiang, Yonghao Yu, Meina Cai, Lulu Li, Yi Liu, Wen Wang, Cai Jun, Hongchao Kou, Kuaishe Wang (2024). Effects of Pre-Deformation on Microstructure Evolution of Ti-43.5al-8.5nb-(W, B, Y) Alloy During Post-Heat Treatment. SSRN Electronic Journal.DOI
5. Ke Qiao, Kuaishe Wang, Jia Wang, Zhenyang Hao, Kairui Xue, Jun Cai, Fengming Qiang, Hongduo Wang, Wen Wang (2023). Clarification of Recrystallized Behavior and Grain Structure Evolution of Friction Stir Welding Twininduced Plasticity Steel by In-Situ Method. SSRN Electronic Journal.DOI
6. Hairui Xing, Ping Hu, Chao-Jun He, Xiangyang Zhang, Fan Yang, Jiayu Han, Songwei Ge, Xing-Jiang Hua, Wen Zhang, Kuaishe Wang, Volinsky Alex A (2022). Origin and Formation of Oxygen and its Effects on Microstructure Evolution and Properties of Molybdenum. SSRN Electronic Journal.DOI

书籍章节

1. Hongduo Wang, Kuaishe Wang, Wen Wang, Yongxin Lu, Pai Peng, Han Peng, Ke Qiao, Zhihao Liu, Lei Wang (2020). Microstructure and Mechanical Properties of Low-Carbon Q235 Steel Welded Using Friction Stir Welding. Acta Metallurgica Sinica (English Letters).DOI