邓效忠

期刊论文

1. Han Zhengyang, Jiang Chuang, Xiaozhong Deng, Su Jianxin, Yuan Julong, Zhang Yanzhen (2026). Research on precise modeling and grinding methods for full tooth surfaces of nonorthogonal face gears. Scientific Reports.DOI
2. Han Zhengyang, Jiang Chuang, Deng Jing, Xiaozhong Deng, Geng Longlong (2026). Optimization of tool design and cutting angles in face gear power skiving. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
3. 张聪聪，曹雪梅，邓效忠，韩正阳，安小涛，许浩（2025）. 基于圆柱内齿轮磨齿机磨削面齿轮方法及试验验证. 《西北工业大学学报》.
4. Congcong Zhang, Xuemei Cao, Xiaozhong Deng, Zhengyang Han, Xueli An, Hao Yu Xu (2025). A face gear grinding method and its experimental verification using cylindrical internal gear grinding machine. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
5. 张浩，苏建新，邓效忠，韩正阳（2024）. 修形斜齿轮成形磨削中齿廓精度补偿方法. 《机械传动》.
6. 耿龙龙，聂少武，蒋闯，邓效忠（2024）. 高阶数控运动轴的弧齿锥齿轮全工序法加工研究. 《机械科学与技术》.
7. 任明辉，魏冰阳，邓效忠，韩正阳（2024）. 面齿轮车齿加工偏差分析及比例修正方法研究. 《机械传动》.
8. Zhengyang Han, Chuang Jiang, Xiaozhong Deng, Congcong Zhang, Longlong Geng, Yong Feng (2024). The Grinding and Correction of Face Gears Based on an Internal Gear Grinding Machine. Machines.DOI
9. 杨帆，杨建军，邓效忠，李天兴，徐家科（2023）. 摆线轮孔型结构对摆线轮振动特性影响分析. 《机械强度》.DOI
10. 符云龙，邓效忠，刘赛赛（2023）. 直齿面齿轮热滚轧建模及工艺参数的优化. 《机械设计与制造》.
11. Yandong Xu, Guixiang Shen, Yingzhi Zhang, Xiaozhong Deng (2023). Analysis and experimental study of metal streamline structure of hot rolling forming of straight face gear. The International Journal of Advanced Manufacturing Technology.DOI
12. Shitao Wang, Zhenshan Gao, Xiaozhong Deng (2023). Gear Tooth‐Forming Mechanism and Experimental Research of a Spiral Bevel Gear Rolling Process Using Local Induction Heating. Mathematical Problems in Engineering.DOI
13. 朱德荣，李娜，聂福全，辛红敏，杨建军，邓效忠，赵利国（2022）. 弧齿锥齿轮阶梯形超声振动系统的参数设计与实验. 《工具技术》.
14. 朱德荣，李娜，李豪，杨建军，邓效忠，辛红敏，聂福全（2022）. 研齿振动系统开槽参数对振动特性的影响研究. 《机械传动》.
15. Yandong Xu, Guixiang Shen, Yingzhi Zhang, Xiaozhong Deng (2022). Forming numerical analysis and experiment research on hot rolling of straight face gear. The International Journal of Advanced Manufacturing Technology.DOI
16. Jing Deng, Chuang Jiang, Xiaozhong Deng, Sai-Sai Liu, Shao-Hang Liu (2022). Analysis and experimental study of metal streamline configuration in hot rolling forming of spiral bevel gears. The International Journal of Advanced Manufacturing Technology.DOI
17. Zhengyang Han, Chuang Jiang, Xiaozhong Deng (2022). Machining and meshing analysis of face gears by power skiving. Journal of Advanced Mechanical Design, Systems, and Manufacturing.DOI
18. 张明辉，邓效忠，苏建新（2021）. 偏心对摆线齿轮成形磨齿的影响及补偿. 《机械传动》.DOI
19. 蒋闯，苏建新，邓效忠，魏闯（2021）. 基于成形法的准双曲面齿轮齿形角等效修正. 《机械设计》.DOI
20. Long-Long Geng, Xiaozhong Deng, Jing Deng, Chuang Jiang, Zhengyang Han (2021). Calculation and experiment of spiral bevel gear by duplex helical method predesigned contact path. Journal of Advanced Mechanical Design, Systems, and Manufacturing.DOI
21. Long-Long Geng, Xiaozhong Deng, Hua Zhang, Shao-Wu Nie, Chuang Jiang (2021). Theory and experimental research on spiral bevel gear by double-side milling method. Mechanics & Industry.DOI
22. Chuang Jiang, Jing Deng, Xiaozhong Deng (2021). Optimal calculation and experimental study on cutting force of hypoid gear processed by generating method. The International Journal of Advanced Manufacturing Technology.DOI
23. 师恩冰，苏建新，张丽芳，邓效忠，任小中，程琛（2020）. 摆线轮多齿成形磨削热力耦合仿真分析. 《机械传动》.DOI
24. 李大庆，吴素珍，赵让乾，邓效忠（2020）. 面齿轮高阶曲线齿形设计及轮齿接触分析. 《机械设计》.
25. 魏冰阳，曹雪梅，邓效忠（2020）. 基于多项式拓扑修形的差齿面啮合仿真与解析. 《西北工业大学学报》.
26. 朱德荣，杨建军，邓效忠，李聚波（2020）. 复合结构研齿换能器的动力学特性与设计. 《振动、测试与诊断》.DOI
27. 胡晨辉，邓效忠，苏建新，柯庆勋（2020）. 针齿壳成形磨削砂轮廓形修整. 《河南科技大学学报(自然科学版)》.DOI
28. 刘大可，魏冰阳，邓效忠，向华安（2020）. 基于SYSWARE.IDE工业互联网平台的齿轮传动设计软件开发. 《机械传动》.DOI
29. Jianxin Su, Yanzhen Zhang, Xiaozhong Deng (2020). Analysis and experimental study of cycloid gear form grinding temperature field. The International Journal of Advanced Manufacturing Technology.DOI
30. Bingyang Wei, Xuemei Cao, Xiaozhong Deng (2020). Simulation and Analysis on Tooth Meshing Ease-Off Surface of Gears Based on Polynomial Topology Modification. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
31. Long-Long Geng, Xiaozhong Deng, Xue-Mei Cao, Jing Deng, Shao-Wu Nie, Chuang Jiang (2020). Research on calculation of machine-tool settings and flank modification for spiral bevel gear by duplex spread blade method based on 4-axis CNC milling machine.DOI
32. Jing Deng, Shao-Wu Nie, Xiaozhong Deng, Chuang Jiang (2020). Tooth surface mismatch modification method of cycloidal bevel gear based on conjugate tooth surface modification. Journal of Advanced Mechanical Design, Systems, and Manufacturing.DOI
33. Jing Deng, Chuang Jiang, Xiaozhong Deng, Ming-Zhuo Zhang, Shao-Wu Nie (2020). The optimal calculation and machining of the spiral bevel gear pinion based on the same cutter head. Journal of Advanced Mechanical Design, Systems, and Manufacturing.DOI
34. Tian-Xing Li, Meng Tian, Hang Xu, Xiaozhong Deng, Xiaotao An, Jian-Xin Su (2020). Meshing contact analysis of cycloidal-pin gear in RV reducer considering the influence of manufacturing error. Journal of the Brazilian Society of Mechanical Sciences and Engineering.DOI
35. Tian-Xin Li, Yulong Li, Xiaozhong Deng, Jinfan Li (2020). A measurement method for tooth surface errors of straight bevel gears based on 3D model. Measurement science and technology.DOI
36. Tian-Xin Li, Xiaotao An, Xiaozhong Deng, Jinfan Li, Yulong Li (2020). A New Tooth Profile Modification Method of Cycloidal Gears in Precision Reducers for Robots. Applied Sciences.DOI
37. Tian-Xin Li, Jinfan Li, Xiaozhong Deng, Meng Tian, Yulong Li (2020). Quantitative correction method for the grinding errors of cycloidal gears in precision reducer. Journal of Advanced Mechanical Design, Systems, and Manufacturing.DOI
38. 邓效忠，张青杰，高振山（2019）. 基于滚轧技术螺旋锥齿轮的加工方法研究. 《机械设计与制造》.DOI
39. 徐恺，程旭东，吴明远，张艳玲，邓效忠，王会良，苟晓玲（2019）. 纳米润滑添加剂对斜齿圆柱齿轮振动及噪声特性的试验分析. 《机械传动》.
40. 朱德荣，邓效忠，杨建军（2019）. 超声振动研齿对齿面加工质量的影响研究. 《机械传动》.
41. 党玉功，都德伟，邓效忠，高振山（2019）. 准双曲面齿轮冷摆辗加工模具寿命预测及其工艺. 《河南科技大学学报(自然科学版)》.DOI
42. 党玉功，高振山，卢杨奔，邓效忠（2019）. 准双曲面齿轮冷摆辗加工多目标工艺优化分析. 《机械传动》.DOI
43. 李大庆，邓效忠，魏冰阳（2019）. 蝶形砂轮安装误差对面齿轮齿面几何误差影响规律. 《机械设计与研究》.
44. 刘赛赛，邓效忠，高振山，符云龙，胡晨辉（2019）. 基于中频感应加热的热滚轧弧齿锥齿轮小轮工艺参数优化. 《机械传动》.DOI
45. Tianxing Li, Guofeng Wang, Xiaozhong Deng, Xiaotao An, Chunrong Xing, Wensuo Ma (2019). Contact Analysis of Cycloidal-pin Gear of RV Reducer Under the Influence of Profile Error. Journal of Physics Conference Series.DOI
46. Yu-Gong Dang, Yong-Yu Yao, Xiaozhong Deng, Geng-Geng Li, Chuang Jiang (2019). Compensation of springback error based on comprehensive displacement method in cold rotary forging for hypoid gear. Journal of Mechanical Science and Technology.DOI
47. 李阁强，张龙飞，韩伟锋，邓效忠，冯勇（2018）. 双圆弧斜齿齿轮泵脉动特性分析及齿形设计. 《中国机械工程》.
48. 柯庆勋，邓效忠，苏建新，聂少武，胡晨辉（2018）. 摆线齿轮成形磨削温度场数值模拟及分析. 《机械传动》.
49. 朱德荣，杨建军，邓效忠，郭浩杰（2018）. 超声研齿声学系统的非谐振设计与验证. 《振动工程学报》.
50. 柯庆勋，邓效忠，苏建新，聂少武（2018）. 摆线齿轮成形磨削温度场分布研究. 《机械传动》.
51. 魏冰阳，王俊恒，邓效忠，刘忠明，孟令先（2018）. 闭功率流锥齿轮试验台及传动齿轮箱的设计与分析. 《机械传动》.
52. 柯庆勋，邓效忠，苏建新，聂少武，耿龙龙，梁帅锋（2018）. 高精度RV减速器摆线轮修形理论研究. 《机械传动》.
53. 蒋闯，邓效忠，聂少武，耿龙龙（2018）. 摆线锥齿轮小轮粗切优化与仿真. 《机械传动》.
54. 杨婧钊，邓效忠，李天兴，王长路，王国峰，邢春荣（2018）. RV减速器摆线针轮传动的精确啮合间隙计算. 《机械传动》.
55. 夏贺鹏，邓效忠，徐爱军，刘赛赛（2018）. 基于轮齿接触分析的弧齿锥齿轮齿面磕碰点检测方法研究. 《机械传动》.DOI
56. Jianxin Su, QingXun Ke, Xiaozhong Deng, Xiaozhong Ren (2018). Numerical simulation and experimental analysis of temperature field of gear form grinding. The International Journal of Advanced Manufacturing Technology.DOI
57. Desen Zhu, Jianjun Yang, Xiaozhong Deng, Chuang Jiang, Ju-Bo Li (2018). Influence of gear parameters on dynamic characteristics of an ultrasonic vibration system. Transactions of the Canadian Society for Mechanical Engineering.DOI
58. Tian-Xing Li, Junxiang Zhou, Xiaozhong Deng, Ju-Bo Li, Chun-Rong Xing, Jian-Xin Su, Hui-Liang Wang (2018). A manufacturing error measurement methodology for a rotary vector reducer cycloidal gear based on a gear measuring center.DOI
59. Xue-Mei Cao, Xiaozhong Deng, Bingyang Wei (2018). A novel method for gear tooth contact analysis and experimental validation. Mechanism and Machine Theory.DOI
60. Zhen-Shan Gao, Ju-Bo Li, Xiaozhong Deng, Jianjun Yang, F. Chen, Ai-Jun Xu, Lei Li (2018). Research on gear tooth forming control in the closed die hot forging of spiral bevel gear.DOI
61. Shao-Wu Nie, Jing Deng, Xiaozhong Deng, Long-Long Geng (2018). A flank modification method for spiral bevel gears based on mismatch topography adjustment.DOI
62. 李阁强，刘威，韩伟锋，邓效忠（2017）. 电液负载模拟器同步结构解耦研究. 《中国机械工程》.
63. 曹雪梅，杨博会，邓效忠，聂少武，魏冰阳（2017）. 齿轮轮齿接触分析的分解算法. 《航空动力学报》.
64. 魏冰阳，杨建军，仝昂鑫，邓效忠（2017）. 基于等距Ease-off曲面的轮齿啮合仿真分析. 《航空动力学报》.
65. 汤红艳，邓效忠，高振山，张青杰（2017）. 弧齿锥齿轮小轮热滚轧成形工艺的数值模拟研究. 《机械传动》.
66. 周军香，李天兴，魏冰阳，邓效忠，周广才，王国峰，邢春荣（2017）. 机器人RV减速器摆线轮制造误差测量新方法. 《机械传动》.
67. 韩正阳，邓效忠，邓静，张明柱，耿龙龙（2017）. 基于四轴联动摆线齿锥齿轮切齿加工及试验验证. 《机械传动》.
68. 韩正阳，邓效忠，聂少武，耿龙龙（2017）. 摆线齿锥齿轮刀盘半径修正对齿面接触性能的影响. 《机械传动》.
69. 梁帅锋，邓效忠，李天兴，王长路，杨婧钊（2017）. 机器人RV减速器摆线针轮传动轮齿接触分析. 《机械传动》.
70. 曹雪梅，何昕，程琛，邓效忠（2017）. 等基圆曲线齿锥齿轮精确三维建模. 《机械设计与制造》.
71. 石锐，邓效忠，蒋闯，付愉（2017）. 弧齿锥齿轮铣齿机铣削力建模与切齿试验. 《河南科技大学学报(自然科学版)》.
72. 邓静，贾新杰，邓效忠（2017）. 切削参数对弧齿锥齿轮齿面平均残余高度的影响. 《航空动力学报》.
73. 汤红艳，邓效忠，高振山（2017）. 基于反共轭原理设计工具轮的准双曲面齿轮热滚轧成形数值模拟. 《机械传动》.DOI
74. 聂少武，邓静，邓效忠，张华，曹雪梅，李聚波（2017）. 弧齿锥齿轮齿面拓扑修形及加工参数计算. 《航空动力学报》.
75. Chuang Jiang, Xiaozhong Deng, Hua Zhang, Longlong Geng, Shaowu Nie (2017). Prediction and simulation of cutting force in hypoid gear machining using forming method. The International Journal of Advanced Manufacturing Technology.DOI
76. Tian-Xin Li, Ju-Bo Li, Xiaozhong Deng, Jianjun Yang, Geng-Geng Li, Wen-Suo Ma (2017). A new digitized reverse correction method for hypoid gears based on a one-dimensional probe.DOI
77. Tian-Xing Li, Jing-Zhao Yang, Xiaozhong Deng, Guo-Feng Wang, Chun-Rong Xing (2017). Calculation of the Meshing Point Position of Cycloidal-pin Wheel Drive for RV Reducer in Robot.DOI
78. 曹雪梅，孙宁，邓效忠（2016）. 直齿锥齿轮低安装误差敏感性设计与实验验证. 《航空动力学报》.
79. 聂少武，邓静，邓效忠，张明柱（2016）. 摆线锥齿轮数控成形铣齿机开发及切齿验证. 《制造技术与机床》.
80. 邓效忠，张艳珍，李天兴，苏建新（2016）. 机器人RV减速机摆线轮成形磨削砂轮廓形修整. 《机械传动》.
81. 聂少武，邓效忠，张华，魏冰阳，李聚波（2016）. 奥利康制摆线齿锥齿轮切齿计算与啮合仿真软件开发. 《机械传动》.
82. 聂少武，邓效忠，魏冰阳，李聚波（2016）. 弧齿锥齿轮与摆线齿锥齿轮统一数学模型及齿面比较. 《机械传动》.
83. 王磊，曹雪梅，邓效忠，雷保珍（2016）. 基于加工中心切齿的弧齿锥齿轮齿面修形技术研究. 《机械传动》.
84. Chuang Jiang, Xiaozhong Deng, Jing Deng, Hua Zhang, Yugong Dang, Shaowu Nie (2016). Face milling for hypoid internal bevel gear using new type of tilt milling machine. The International Journal of Advanced Manufacturing Technology.DOI
85. Jubo Li, Hui-Jie Ma, Xiaozhong Deng, Hua Zhang, J.J. Yang, Kai Xu, Tian-Xing Li, Ai-Jun Xu, Huiliang Wang (2016). An approach to realize the networked closed-loop manufacturing of spiral bevel gears. The International Journal of Advanced Manufacturing Technology.DOI
86. Chuang Jiang, R. Shi, Xiaozhong Deng, Zheng-Yang Han (2016). Milling force model of spiral bevel gear based on the theory of oblique cutting and cutting test.DOI
87. Chuang Jiang, Jing Deng, Xiaozhong Deng, Hua Zhang, Shao-Wu Nie, Long-Long Geng (2016). Study of motional parameters calculation and tooth cutting experiment based on the new type of tilt milling machine.DOI
88. 刘志平，苏建新，邓效忠，徐增军（2015）. 基于多目标优化的修形非圆行星齿轮水马达加工参数计算及仿真. 《机械传动》.
89. Jing Deng, Jubo Li, Xiaozhong Deng (2015). A network-based manufacturing model for spiral bevel gears. Journal of Intelligent Manufacturing.DOI
90. Hui-liang Wang, Xiaozhong Deng, Ju-bo Li, Jian-jun Yang (2015). Dynamic Assessment of Vibration of Tooth Modification Gearbox Using Grey Bootstrap Method. Shock and Vibration.DOI
91. Jing Deng, Wang Bi, Xiaozhong Deng, Jubo Li (2015). The theoretical and experimental research of machining equal base circle bevel gears with a pot-shaped milling cutter. Journal of Advanced Mechanical Design Systems and Manufacturing.DOI
92. Huiliang Wang, Xiaozhong Deng, Jianhai Han, Jubo Li, Jianjun Yang (2015). Mathematical Model of Helical Gear Topography Measurements and Tooth Flank Errors Separation. Mathematical Problems in Engineering.DOI
93. Xiaozhong Deng, Geng-Geng Li, Bingyang Wei, Jing Deng (2014). Face-milling spiral bevel gear tooth surfaces by application of 5-axis CNC machine tool.DOI
94. Yu-Gong Dang, Xiaozhong Deng, Bin Wang (2014). Elastic-Plastic Numerical Simulation of Cold Rotary Forging for Hypoid Gear and the Springback Error.DOI
95. 高振山，邓效忠，陈拂晓，李天兴（2013）. 基于局部应力应变法的弧齿锥齿轮锻造模具寿命预测. 《机械传动》.
96. 王斌，邓效忠，陈均，李更更（2013）. 基于VERICUT的指形铣刀数控加工等基圆锥齿轮仿真. 《制造技术与机床》.
97. 王斌，邓效忠，党玉功，李更更，李天兴（2013）. 盘刀加工等基圆锥齿轮干涉检验的截面曲线法. 《组合机床与自动化加工技术》.
98. Jianjun Yang, Hao Zhang, Xiaozhong Deng, Bingyang Wei (2013). Ultrasonic lapping of hypoid gear: System design and experiments. Mechanism and Machine Theory.DOI
99. Xiaozhong Deng (2013). The Virtual Machining Research of Hypoid Gears. Machinery Design and Manufacture.
100. 王会良，邓效忠（2012）. 数控磨齿机参数化编程软件开发. 《制造业自动化》.
101. 李更更，邓效忠，魏冰阳（2012）. 指形铣刀基于刀倾法数控加工准双曲面齿轮. 《河南科技大学学报(自然科学版)》.
102. Shao-Wu Nie, Xiaozhong Deng, Jian-Xin Su (2012). CNC Machine Model of Epicycloid Bevel Gear and Cutting Experiment Based on Formate Method.DOI
103. 王建华，陈拂晓，邓效忠，王建伟，郭俊卿（2011）. 准双曲面齿轮主动轮精锻的数值模拟. 《锻压技术》.
104. 王建华，陈拂晓，邓效忠，高振山，郭俊卿（2011）. 准双曲面齿轮制造技术. 《锻压技术》.
105. Yan-Hong Wan, Zong-He Peng, Zeng-Jun Xu, Jian-jun Yang, Xiaozhong Deng, Bingyang Wei (2011). Planetary transmission mechanism for bevel gears.
106. Bin Wang, Cheng Cheng, Jian-Xin Su, Xiaozhong Deng, Jian-Song Guo (2011). Gear grinding machine for numerical-control formed grinding wheel.
107. Ai-Jun Xu, Xiaozhong Deng, Jing Zhang, Ju-Bo Li (2011). Design of multichannel card oriented to hypoid gear measurement. International Conference on Computer Science and Service System.DOI
108. 李更更，邓效忠，魏冰阳（2010）. 准双曲面变性法小轮数控铣齿全程加工仿真. 《工具技术》.
109. Genggeng Li, Xiaozhong Deng, Bingyang Wei, Baozhen Lei (2010). Finger milling-cutter CNC generating hypoid pinion tooth surfaces based on modified-roll method and machining simulation. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
110. Jianjun Yang, Jubo Li, Xiaozhong Deng, Kai Xu, Hua Zhang (2010). A web services-based approach to develop a networked information integration service platform for gear enterprise. Journal of Intelligent Manufacturing.DOI
111. Xuemei Cao, Xiaozhong Deng (2010). Deviation and correction of tooth surface for spiral bevel gears. International Conference on Mechanic Automation and Control Engineering.DOI
112. Tianxing Li, Xiaozhong Deng, Bingyang Wei (2010). Notice of Retraction: Correction and data processing for tooth surface deviation of hypoid gear. International Conference on Advanced Computer Control.DOI
113. Jianjun Yang, Kai Xu, Xiaozhong Deng, Bingyang Wei (2010). Dynamics of spiral bevel gear rattling system. Modelling Autonomic Communications Environments.DOI
114. 王明海，邓效忠，杨桂香，郭建松（2009）. 数控机床中消除蜗轮副侧隙的几种结构. 《机械工程师》.
115. 王超俊，邓效忠（2009）. 基于SolidWorks对四轴数控螺旋锥齿轮铣齿机防护罩进行三维造型设计. 《机床与液压》.
116. Kai Xu, Jianjun Yang, Xiaozhong Deng, Jia Ping (2009). Dynamic Response Analysis for Non-smooth Gear Rattling System.DOI
117. 任小中，邓效忠，苏建新（2008）. 成型砂轮数控修整装置的研制与试验. 《工具技术》.
118. Bingyang Wei, Xiaozhong Deng, Zongde Fang (2008). The lapping mechanism of hypoid gears. Journal of Materials Processing Technology.DOI
119. Xiaozhong Deng (2008). Numerical control gear milling machine tool for processing helical beval gear.
120. 宋艳丽，魏冰阳，邓效忠（2007）. 超声研齿振动子系统的研究与变幅杆设计. 《工具技术》.
121. 赵让乾，邓效忠，杨丙乾（2007）. 基于Pro/E的热锻模数控加工工艺研究. 《模具工业》.
122. 张金良，方宗德，邓效忠（2007）. 大速比准双曲面齿轮的设计与分析. 《机床与液压》.
123. 张金良，方宗德，邓效忠（2007）. 突端刀具的最大刀尖圆角半径的计算. 《机床与液压》.
124. Bingyang Wei, Xiaozhong Deng, Zongde Fang (2007). Study on ultrasonic-assisted lapping of gears. International Journal of Machine Tools and Manufacture.DOI
125. Xiaozhong Deng (2007). Maximal Edge Radius of the Top-rem Profile Blades. Machine Tool & Hydraulics.
126. Jinliang Zhang, Zongde Fang, Xuemei Cao, Xiaozhong Deng (2006). The modified pitch cone design of the hypoid gear: Manufacture, stress analysis and experimental tests. Mechanism and Machine Theory.DOI
127. Hua Zhang, Xiaozhong Deng, Bingyang Wei (2006). Application of Genetic Algorithm to Intensity Optimization of Nonzero-coefficient Spiral Bevel Gears.
128. Xiaozhong Deng (2005). Interior Meshing Gear Wheel Transmission Analysis and Setting-up of the Parameter Three Dimensional Model. Coal Mine Machinery.
129. 张金良，方宗德，邓效忠（2004）. 高强度准双曲面齿轮的新设计方法. 《中国机械工程》.
130. Xiaozhong Deng (2004). DESIGN AND EXPERIMENT OF SPIRAL BEVEL GEARS WITH HIGH CONTACT RATIO.DOI
131. 魏冰阳，周彦伟，方宗德，邓效忠（2003）. 准双曲面齿轮CAD系统开发. 《机床与液压》.
132. 王军，曹雪梅，周彦伟，邓效忠，杜发荣（2003）. 弧齿锥齿轮的三维仿真. 《工具技术》.
133. 方宗德，刘涛，邓效忠（2002）. 基于传动误差设计的弧齿锥齿轮啮合分析. 《航空学报》.
134. 任东锋，邓效忠，任小中（2002）. 面向“非零”传动弧齿锥齿轮的CAD系统的开发. 《机床与液压》.
135. 吴云斌，兰新哲，邓效忠（2002）. CB3232程控车床降低噪声的实验研究. 《机床与液压》.
136. 塔静宁，邓效忠，丁浩（2002）. 整体加长小直径磨前滚刀的设计. 《机械工程师》.
137. 邓效忠，方宗德，杨宏斌（2001）. 准双曲面齿轮齿面接触应力过程计算. 《中国机械工程》.
138. 方宗德，杨宏斌，周彦伟，邓效忠（2001）. 高速弧齿锥齿轮动态啮合质量优化. 《航空学报》.
139. Xiaozhong Deng (2001). Calculation on Tooth Surface Contact Stress Course of Hypoid Gears.