陶文铨

期刊论文

1. 王子星，陶文铨（2026）. 数据中心空气冷却器的通道传热强化技术研究. 《制冷学报》.
2. 蔡海鹏，李兆仁，冀文涛，陶文铨，朱江楠，温泉（2026）. 布西内斯克近似下速度-压力全耦合求解的伪瞬态延拓方法. 《西安交通大学学报》.
3. 冯相友，陶文铨（2026）. 有限容积方法数值求解声子玻尔兹曼方程中的偏置误差及其影响规律. 《西安交通大学学报》.
4. 姜东，陈满，张富，张楠楠，程玉霖，冀文涛，陶文铨（2026）. 制冷工质R245fa在水平不锈钢强化管外冷凝和沸腾换热性能的实验研究. 《西安交通大学学报》.
5. 马阳泽龙，程想，冀文涛，朱江楠，温泉，陶文铨（2026）. 涡轮叶片前缘冲击/气膜复合冷却特性实验研究. 《西安交通大学学报》.
6. 陶文铨，白帆，张卓，何璞，方文振，母玉同，陈磊，陈黎（2026）. 质子交换膜燃料电池的数值仿真及其工程应用综述. 《科学通报》.
7. Zhuo Zhang, Yang Wang, Qilin Luo, Qi-Rui Yang, Zi-Qian Fan, Li Chen, Wenquan Tao (2026). Topology optimization and performance simulation of the transition zone of the proton exchange membrane fuel cell flow field. International Journal of Heat and Mass Transfer.DOI
8. Li Chen, Wenquan Tao, M. Mobedi, K. Hooman (2026). Editorial for the special issue of “Heat and mass transfer in porous media: Fundamentals and Applications”. International Journal of Heat and Mass Transfer.DOI
9. Yi Yuan, Qirui Yang, Hanbing Ke, Wenquan Tao, Li Chen (2026). Multi-fidelity flow boiling heat transfer topology optimization for arbitrary design domain. International Journal of Heat and Mass Transfer.DOI
10. Kunying Gong, Ziyang Guo, Wei-Qiang Xu, Li Chen, Wenquan Tao (2026). Experimental study on flight characteristics of unmanned aerial vehicles powered by air-cooled proton exchange membrane fuel cells in high-altitude environments. Applied Energy.DOI
11. Pengcheng Liao, Xingbao Lyu, Wenjing Ning, Li Chen, Wenquan Tao (2026). Design and 4E analysis of a solar-driven distributed combined cooling, heating, and power system for zero-energy community. International journal of hydrogen energy.DOI
12. Wenjing Ning, Li Chen, Pengcheng Liao, Wenquan Tao (2026). Analysis and optimization of a 2-kW PEMFC-CHP system under different operating modes. International Journal of Green Energy.DOI
13. Sitong Li, Qirui Yang, Xinjian Zheng, Li Chen, Wenquan Tao (2026). Topology optimization of turbulent convective heat transfer processes in microchannels. International Communications in Heat and Mass Transfer.DOI
14. Sheng Song, Xin Sha, Shuxuan Zhang, Wenquan Tao, Li Chen (2026). Pore-scale investigation of three-phase immiscible and miscible displacement in a realistic three-dimensional porous medium. International Communications in Heat and Mass Transfer.DOI
15. Shuxuan Zhang, Sheng Song, Wenquan Tao, Li Chen (2026). Pore-scale mechanisms of phase transition and residual oil mobilization during CO2-oil displacement. International Communications in Heat and Mass Transfer.DOI
16. Tianyi Zhang, Yulong Yu, Hang Yu, Yifan Wang, Lei Chen, Wen-Quan Tao (2026). Intelligent predictive cooling strategy for liquid-cooled lithium-ion batteries under dynamic operating conditions. International Journal of Heat and Mass Transfer.DOI
17. Nan Qiao, Wen‐Zhen Fang, Yu-Han Xu, Kaibo An, Tao Huang, Fan Bai, Wen‐Quan Tao (2026). Multi-scale simulation of Pt degradation in PEMFC catalyst layers under nanoscale confinement and charge regulation. Chemical Engineering Journal.DOI
18. Xiao-Ming Gong, Hailong Li, Fan Bai, Xian-Hao Liu, Xin-Yu Xue, Hao-Yang Ying, Nan Li, Wen‐Quan Tao (2026). A comprehensive measurement of air temperature field and thermal performance study of a row-level laboratory data center. Applied Energy.DOI
19. Wen‐Zhen Fang, Kai-Bo An, Deng-Ke Hu, Zi-Hao Xuan, Nan Qiao, Yu-Han Xu, Wen‐Quan Tao (2026). Effects of interfacial confinement induced heterogeneous reconstruction of ionomer films on oxygen transport. Journal of Colloid and Interface Science.DOI
20. Wen‐Zhen Fang, Zi-Hao Xuan, Sheng-Yun Zhang, Sheng-Yue Shen, Kai-Bo An, Nan Qiao, Yu-Han Xu, Wen‐Quan Tao (2026). Freezing behaviors of supercooled water in PEMFC gas diffusion layers regulated by wettability and saturation: infrared-electrical diagnosis and physics-based predictions. International Communications in Heat and Mass Transfer.DOI
21. Zhuo Zhang, Ke Xue, Yin-Hao Li, Xiao-Shuai Bai, Yu‐Tong Mu, Nan Xin, Li Chen, Wen‐Quan Tao (2026). Compression behavior of gas diffusion layers and its impacts on mass transport and performance in multi-branch flow field fuel cells. International Communications in Heat and Mass Transfer.DOI
22. Haobo Guo, Mengwei Dai, Na Sun, Siyuan Yang, Jie Yu Wu, Junyu Chen, Mingyang Wang, Xian-Hao Liu, Wen‐Quan Tao (2026). Spatio-temporal heterogeneous graph-based modeling and temperature prediction for data center indoor system. Applied Energy.DOI
23. Zhengyan Li, Qiuyu Wang, Zihan Wang, Lei Xian, Lei Chen, Wen‐Quan Tao (2026). Asymmetric dual-segment power-law ionomer gradients for variable-humidity low-Pt PEMFCs: A mechanism-guided robust optimization study. Journal of Energy Chemistry.DOI
24. G W Liu, Ke Xue, Z K Li, L Chen, Wen‐Quan Tao (2026). Flow-field-dependent spatial freezing characteristics and amplification of flow-field effects by start-up conditions during self-cold start of a large-area PEM fuel cell. Chemical Engineering Journal.DOI
25. Zhuo Zhang, Bin Yuan, Yin-Hao Li, Eunseop Yeom, L Chen, Wen‐Quan Tao (2026). Multi-scale investigation of two-phase flow in gas diffusion layers: New correlation and PEMFC performance prediction. International Journal of Hydrogen Energy.DOI
26. Lei Xian, Jiazhen Kong, Ding Xirui, Zhengyan Li, Kai Jiao, Pu He, Lei Chen, Wen‐Quan Tao (2026). Pt loading-dependent effects of hot pressing on ultrasonic-sprayed membrane electrodes for PEM fuel cells. Applied Energy.DOI
27. Shuchang Li, Yuting Li, Shuangyu Lv, Yulong Yu, Junchen Dong, Lei Xian, Lei Chen, Wen‐Quan Tao (2026). A universal two-stage framework for gas diffusion layer reconstruction in proton exchange membrane fuel cells: Toward high-fidelity through-plane porosity distribution. Applied Energy.DOI
28. Ming-Jia Li, Chuan-Qi Zhang, Guang-Min Zhou, Wen‐Quan Tao, Dian-Wei Fu, Z P Huang (2026). Development and advancement of composite heat storage materials: Performance enhancement, functional optimization and material preparation of functional bionic phase change materials. Renewable and Sustainable Energy Reviews.DOI
29. Zheng-Dao Li, Xin-Yu Xue, Bin Liu, Zhuo Zhang, Wen‐Quan Tao (2026). Experimental and numerical investigation on polymer-based plate heat exchangers: A promising alternative to aluminum foil designs. International Communications in Heat and Mass Transfer.DOI
30. Zi-Xing Wang, Zeng-Qun Li, Ke Xue, Jia-Long Huang, Pu He, Ze-Hong He, Ruo-Xuan Fan, L Chen, Wen‐Quan Tao (2026). Experimental study on a complete system with hydrogen generation, storage, and utilization. International Journal of Hydrogen Energy.DOI
31. Guoqiu Liu, Ke Xue, LEI CHEN, Wen‐Quan Tao (2026). Comprehensive analysis of area effects and spatial non uniformity in a large area PEM fuel cell under different cold start strategies using a three dimensional non isothermal multi physics model. Applied Energy.DOI
32. Tao Huang, Yu-Han Xu, Wen‐Zhen Fang, Sheng-Yue Shen, Yi Zhun Zhu, Wen‐Quan Tao (2026). Effects of liquid water distributions on oxygen transport resistances in catalyst layers: A physics-based model based on pore-scale results. Electrochimica Acta.DOI
33. Peng Gao, Yi Liu, Qi Dong, Fu-Feng Zhao, Wen‐Tao Ji, Wen‐Quan Tao (2026). Comprehensive analysis of thermo-hydraulic performance for finless flat tube heat exchangers: a modeling and experimental approach. Experimental Heat Transfer.DOI
34. Shuangyu Lv, Yulong Yu, Lei Xian, Qiuyu Wang, L Chen, Wen‐Quan Tao (2026). Multi-parameter analysis and optimization of proton exchange membrane fuel cells with metal foam rib flow fields featuring gradient porosity designs. International Communications in Heat and Mass Transfer.DOI
35. Bin-Xin Qiao, Pu He, Yu-Chen Li, Xikui Wang, Kai Liu, Wen‐Quan Tao (2026). Investigation of the effects of the catalyst structure parameter of an agglomerate model on the performance of a PEM water electrolyzer. Applied Energy.DOI
36. Kai-Bo An, Deng-Ke Hu, Wen‐Zhen Fang, Yu-Han Xu, Zi-Hao Xuan, Yanan Zhu, Wen‐Quan Tao (2026). Interfacial Regulation of Oxygen Transport in PEMFC Catalyst Layers by Functionalized Carbon Supports. ACS Applied Materials & Interfaces.DOI
37. G. P. Zhao, Yu-Han Xu, Wen‐Zhen Fang, Zi-Hao Xuan, Kai-Bo An, Wen‐Quan Tao (2026). Optimization of gradient catalyst layers for enhancing performance and durability of PEMFCs. Journal of Power Sources.DOI
38. Fan Bai, Ruo-Xuan Fan, Si-Yuan Yang, Zhiyi Tang, Wei Zhu, Lei Chen, Li Jia Chen, Wen‐Zhen Fang, X. Q. Hao, Wen‐Quan Tao (2026). An improved multiphysics-integrated computational framework for 3D proton exchange membrane fuel cell modeling. Part II: Voltage and reference current density iteration strategies, framework validation and discussions. International Communications in Heat and Mass Transfer.DOI
39. Fan Bai, Si-Yuan Yang, Ruo-Xuan Fan, Zhiyi Tang, Manning Wang, Hui-Qin Zhang, Zhuo-Liang Yao, Liya Chen, Liya Chen, Wen‐Zhen Fang, X. Q. Hao, Wen‐Quan Tao (2026). An improved multiphysics-integrated computational framework for 3D proton exchange membrane fuel cell modeling. Part I: Architecture development. International Communications in Heat and Mass Transfer.DOI
40. Lei Xian, Zihan Wang, Boxi Chen, Boxi Chen, Zhengyan Li, Guoqiu Liu, Lei Chen, Wen‐Quan Tao (2026). Effect of ionomer content on fuel cell performance and mass transport under different Pt loadings: Experimental and molecular simulation study. Renewable Energy.DOI
41. Shuxuan Zhang, Sheng Song, Zhengxue Dai, Wen‐Quan Tao, Li Chen (2026). Microfluidic study of CO2-water-oil displacement in porous media with variable pore size and depth. International Communications in Heat and Mass Transfer.DOI
42. Shuangyu Lv, Yulong Yu, Shuchang Li, Changhan Li, Lei Xian, Lei Chen, Wen‐Quan Tao (2026). Structure design for the gas distribution zone of PEMFC bipolar plates: A data-driven multi-objective optimization framework integrating the Taguchi method and grey relational analysis. Chemical Engineering Journal.DOI
43. Yu-Han Xu, Wen‐Zhen Fang, Kai-Bo An, Zi-Hao Xuan, Deng-Ke Hu, Yi Zhu, Wen‐Quan Tao (2026). Rapid predictions of platinum degradation in cathode catalyst layers based on Ostwald ripening theory and numerical insights. Chemical Engineering Journal.DOI
44. Bowen Zuo, Lei Xian, Zhengyan Li, Boxi Chen, Shuangyu Lv, Lei Chen, Wen‐Quan Tao (2026). Molecular dynamics simulation of electroosmotic flow in sinusoidally rough nanochannels on interfacial and flow characteristics. Physics of Fluids.DOI
45. Zedong Wang, HE Yingqi, Yanjun Dai, Tao Wenquan, Wang Yungang (2026). Experimental Study on Cavitation Flow Characteristics in Orifice Plate under High Pressure Conditions. Journal of Mechanical Engineering.DOI
46. Yutong Mu, Zhixin Wu, Xue Du, Pu He, Fan Bai, Zhuo Zhang, Zhiguo Qu, Wen‐Quan Tao (2026). Experimental study on PEMFC durability of cathode catalyst layers with different carbon supports under accelerated aging conditions. Fuel.DOI
47. Y.T. Li, Shu-Chang Li, Run-Jie Zhang, Yan-Jun Dai, Wen‐Quan Tao (2026). Comparative analysis of annual energy consumption of air cooling and liquid cooling in data centers. International Journal of Heat and Mass Transfer.DOI
48. Kaibo An, Yi Zhu, Wen‐Zhen Fang, Nan Qiao, Tao Huang, Sheng-Yue Shen, Fan Bai, Wen‐Quan Tao (2026). Effects of platinum nanoparticle shape on mass transport performance of porous carbon catalysts in fuel cells. International Journal of Heat and Mass Transfer.DOI
49. Zhengyan Li, Lei Xian, Guoqiu Liu, Zihan Wang, Lei Chen, Wen‐Quan Tao (2026). Enhancement and mechanistic elucidation of thermal and electrochemical performance for proton exchange membrane fuel cells with wavy integrated cooling configurations under diverse coolant flow conditions. Energy Conversion and Management.DOI
50. Yi Zhu, Deng-Ke Hu, Wen‐Zhen Fang, Zi-Hao Xuan, Kai-Bo An, Yu-Han Xu, Wen‐Quan Tao (2026). A multi-field numerical study of freeze-induced interfacial damage in PEMFC catalyst layers during cold start. Applied Thermal Engineering.DOI
51. Zhuo Zhang, Yin-Hao Li, Ke Xue, Xiao-Shuai Bai, Yu‐Tong Mu, Nan Xin, Wen‐Quan Tao (2026). Compression–cooling coupled effects on transport characteristics and voltage losses in large‑area groove‑type PEMFCs. International Journal of Heat and Mass Transfer.DOI
52. Zhengyan Li, Lei Xian, Guoqiu Liu, Yulong Yu, Lei Chen, Wen‐Quan Tao (2026). Performance and uniformity enhancement in low‑platinum PEMFCs via synergistic dual‑segment power‑law platinum and ionomer gradients: A physics‑informed multi‑objective optimization approach. Energy Conversion and Management.DOI
53. Guoqiu Liu, Lei Xian, Bowen Zuo, Boxi Chen, Lei Chen, Wen‐Quan Tao (2026). Mechanistic study of stepwise loading in hydrogen fuel cell self-cold start at − 30 °C. Applied Thermal Engineering.DOI
54. G W Liu, Z K Li, L Chen, Wen‐Quan Tao (2026). Impact of cooling unit configuration on coupled thermal–hydration behavior in a PEM fuel cell short stack using a 3D multiphase non-isothermal model. Energy Conversion and Management.DOI
55. Yu-Zhong Ding, Dong Jiang, Wen‐Tao Ji, Li Jia Chen, Wen‐Quan Tao (2026). Systematic experimental investigation of the effects of geometric parameters on film-wise condensation of externally finned tubes. International Journal of Thermal Sciences.DOI
56. Kai-Bo An, Deng-Ke Hu, Wen‐Zhen Fang, Yu-Han Xu, Zi-Hao Xuan, Yanan Zhu, Wen‐Quan Tao (2026). Atomic-scale insights into how mechanical stress affects oxygen transport performances in fuel cells. International Journal of Heat and Mass Transfer.DOI
57. Yuqing Tang, Wen-Zhen Fang, Hongliang Du, Wen‐Quan Tao (2026). Physics-based two-scales reduced order model for real-time thermal management in immersion cooling data centers. Applied Thermal Engineering.DOI
58. Y.T. Li, Shu-Chang Li, Yan-Jun Dai, Wen‐Quan Tao (2026). Small channel cold plate flow field and bionic rib structure design for high heat flux electronic devices cooling. International Journal of Heat and Mass Transfer.DOI
59. Fan Bai, Bin-Xin Qiao, Ren-Jie Yin, Hong-Bing Quan, Xin-Qi Jiao, Lei Chen, Wen‐Zhen Fang, Wen‐Quan Tao (2026). A comparative research on the flow distribution characteristics of anode, cathode and coolant in a commercial-size PEMFC stack. Applied Thermal Engineering.DOI
60. Lei Xian, Zhengyan Li, Zihan Wang, Chenjie Li, Bowen Zuo, Lei Chen, Wen‐Quan Tao (2026). A novel gradient double-sided rectangular blockage cathode flow field for enhancing mass transport and output performance in PEMFCs. Fuel.DOI
61. 陈广亮，陶文铨，蔡德昌，殷新立，李锦超，谭港，蒙舒祺，叶国栋，郑雄（2025）. 四代堆热工水力CFD应用的综合分析. 《核技术》.
62. 宫小明，孙诚汇，冯相友，陶文铨（2025）. 单相浸没式液冷服务器冷却性能的数值模拟研究. 《低温与超导》.
63. 靳姝琦，陈宇杰，凌空，陶文铨（2025）. 三维矩形截面通道内不同流速下的过冷流动沸腾数值探究. 《西安交通大学学报》.
64. 蔡赛杰，朱昊宁，张卓，陈俊宏，陶文铨（2025）. 运行参数对质子交换膜燃料电池堆耐久性影响的实验研究. 《西安交通大学学报》.
65. 公昆颖，郭子阳，田晨琪，韦帅，何泽鸿，徐伟强，陈黎，陶文铨（2025）. 无人机用空冷燃料电池长时间运行特性研究. 《电源技术》.
66. 朱昊宁，袁斌，陈俊宏，黄嘉龙，何泽鸿，何璞，陶文铨（2025）. 高湿环境下质子交换膜燃料电池停机恢复的实验研究. 《西安交通大学学报》.
67. 尹仁杰，白帆，陶文铨（2025）. 采用偏心端头多几何参数耦合的商用质子交换膜燃料电池电堆阴极气体分配优化. 《西安交通大学学报》.
68. Chao Guo, Li Chen, Wenquan Tao (2025). Topology optimization of the gas distribution zone uniformity in proton exchange membrane fuel cells. Energy.DOI
69. Ji-Wang Luo, Li Chen, Kentaro Yaji, Wenquan Tao (2025). Improved adjoint lattice Boltzmann method for topology optimization of laminar convective heat transfer. International Journal of Heat and Mass Transfer.DOI
70. Zhiyi Tang, Xianhao Liu, Li Chen, Zhuo Zhang, Wenquan Tao (2025). Study on thermal and flow characteristics and correlations of single-phase laminar wavy microchannels. Journal of Thermal Analysis and Calorimetry.DOI
71. Ji-Wang Luo, K. Yaji, Li Chen, Wenquan Tao (2025). Data-driven multi-fidelity topology design of fin structures for latent heat thermal energy storage. Applied Energy.DOI
72. Shuxuan Zhang, Xin Sha, Hangkai Wei, Li Chen, Wenquan Tao (2025). Microfluidic experimental study of CO2-water-oil three-phase flow in porous media under both immiscible and miscible conditions. International Communications in Heat and Mass Transfer.DOI
73. Zhao‐Ren Li, Guo-Hui Ou, Li Chen, Wen-Tao Ji, Wenquan Tao (2025). An Implicit Scheme for Least‐Square Gradient in Coupled Algorithm. International Journal for Numerical Methods in Fluids.DOI
74. Wenjing Ning, Xingbao Lyu, Pengcheng Liao, Li Chen, Wenquan Tao (2025). Performance analysis of a 1-kW PEMFC-CHP system under different rule-based energy management strategies in China. Renewable Energy.DOI
75. Ruiyuan Zhang, Li Chen, Yi-Kun Wang, Guang-jing Sun, J.-H. You, Ting-ting Li, Wenquan Tao (2025). Multiscale study of carbon corrosion and Pt degradation in the cathode catalyst layer and their effects on PEMFC performance decay over 5000 h operation. Chemical Engineering Journal.DOI
76. Pu He, Qianxi Zhang, Yutong Mu, Zhiguo Qu, Jia Yin, Ziai Li, Junhong Chen, Wen‐Quan Tao (2025). Temperature-dependent cathode starvation effects on cold start behavior of PEMFC stacks: An experimental investigation. Applied Energy.DOI
77. Deng-Ke Hu, Wen-Zhen Fang, Kai-Bo An, Yi Zhu, Zi-Hao Xuan, Yu-Han Xu, Menglian Zheng, Wen‐Quan Tao (2025). Insights into how ionomer degradation affects oxygen transport resistance in catalyst layers. Journal of Colloid and Interface Science.DOI
78. Ling Han, Tao Huang, Wen‐Zhen Fang, Wen‐Quan Tao (2025). Numerical Modeling of Asymmetric-Temperature Cycling for Lithium-Ion Batteries Under Fast-Charging Conditions. Energies.DOI
79. Mazhar Hussain, Wen‐Quan Tao, Ya‐Ling He, Abdulmajeed Mohamed (2025). Lattice Boltzmann modeling with appropriate interface treatment for the transient heat and mass diffusion through multilayered multicomponent materials with irregular boundary. Engineering Computations.DOI
80. Wen‐Quan Tao, Fan Bai, Zhuo Zhang, Pu He, Wen‐Zhen Fang, Yu‐Tong Mu, Lei Chen, Li Chen (2025). Simulation of proton exchange membrane fuel cells and their engineering applications: a review. Chinese Science Bulletin (Chinese Version).DOI
81. Zi-Hao Xuan, Wen‐Zhen Fang, Guo-Rui Zhao, Kaibo An, Yunfei Xu, Tao Huang, Wen‐Quan Tao (2025). A physics-based design rule for boosting PEMFC performances via gradient catalyst layer designs. Applied Energy.DOI
82. Pu He, Qianxi Zhang, Yu‐Tong Mu, Zhiguo Qu, Ziai Li, Junhong Chen, Wen‐Quan Tao (2025). Numerical investigation of low-temperature cold start in PEM fuel cell stacks: Effects of initial hydration and current loading strategies. Case Studies in Thermal Engineering.DOI
83. Ren-Jie Yin, Fan Bai, Yu‐Tong Mu, Li Chen, Wen‐Quan Tao (2025). Investigation on PEMFC stack cathode gas maldistribution by an experiment-assisted improved flow network and computational fluid dynamics. International Communications in Heat and Mass Transfer.DOI
84. Chaoxiang Hu, Wen‐Zhen Fang, Guo-Rui Zhao, Fan Bai, Wen‐Quan Tao (2025). Fast predictions of cold start performances of fuel cells using data-driven assisted models. Journal of Power Sources.DOI
85. Faquan Shen, Wen‐Zhen Fang, Shengyun Zhang, Ding Zhang, Wen‐Quan Tao (2025). Freezing Patterns of Supercooled Binary Droplets on Cold Hydrophobic Surfaces. Langmuir.DOI
86. Junyu Chen, Xianhao Liu, Yuting Li, Xiangyou Feng, Junhong Chen, Haoning Zhu, Wen‐Quan Tao (2025). Numerical and experimental investigation of TPMS-structured cold plates for electronic device cooling. Applied Energy.DOI
87. Zi-Hao Xuan, Wen‐Zhen Fang, Guo-Rui Zhao, Yu-Hao Lu, Kai-Bo An, Yunfei Xu, Wen‐Quan Tao (2025). Fast predictions of ice melting during cold start of PEMFCs: Insights from pore-scale simulations. Renewable Energy.DOI
88. Zhichao Li, Zhiguo Qu, Zhiyuan Jiang, Hongbo Huang, Wen‐Quan Tao (2025). Degradation mechanism of lithium-ion battery under appropriate in-plane temperature gradient. Green Energy and Intelligent Transportation.DOI
89. Zhuo Zhang, Sai-Jie Cai, Cheng Jun-hong, Hao‐Bo Guo, Wen‐Quan Tao (2025). A comprehensive system simulation from PEMFC stack to fuel cell vehicle. Applied Energy.DOI
90. Kaibo An, Wen‐Zhen Fang, Guo-Rui Zhao, Zi-Hao Xuan, Yu-Han Xu, Menglian Zheng, Wen‐Quan Tao (2025). Effects of ice crystals on the proton transport in proton exchange membranes. Journal of Membrane Science.DOI
91. Yu-Hao Lu, Wen‐Zhen Fang, Tao Huang, Zi-Hao Xuan, Kaibo An, Wen‐Quan Tao (2025). Effects of microstructure of porous carbon supports on oxygen transport performance: A pore-scale study. International Communications in Heat and Mass Transfer.DOI
92. Guoqiu Liu, Shuangyu Lv, Lei Chen, Wen‐Quan Tao (2025). Optimization of self-cold start for PEM fuel cell with serpentine flow field based on three-dimensional transient model: synergy of initial conditions and start-up strategies. Renewable Energy.DOI
93. Guoqiu Liu, Zhengyan Li, Lei Chen, Wen‐Quan Tao (2025). Multi-objective optimization design and numerical analysis of air-cooled proton exchange membrane fuel cell with bamboo flow field based on neural network model. Applied Energy.DOI
94. Ning Wang, Tao Lai, Wenkai Wang, Zhiguo Qu, Xuhui Wen, Guangyou Xie, Wen‐Quan Tao (2025). Challenges and perspectives towards multi-physics modeling for porous electrode of ultrahigh performance durable polymer electrolyte membrane fuel cells. eTransportation.DOI
95. Xiang Cheng, Yuegeng Ma, Kun Huang, Wen‐Tao Ji, Jiang Lei, Wen‐Quan Tao (2025). Experimental investigation on the effect of internal rib turbulators on film cooling effectiveness with coolant cross-flow. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
96. Na Sun, Shuai Zhang, Nan Li, Zijian Li, Meng He, Zhengchun Shen, Ke Wang, Xiaoyong Guo, Wen‐Quan Tao (2025). Adaptive optimization decision system for plate-fin heat Exchangers: An integrated approach to enhancing efficiency and performance. Case Studies in Thermal Engineering.DOI
97. Guo-Rui Zhao, Wen‐Zhen Fang, Chaoxiang Hu, Kaibo An, Zi-Hao Xuan, Wen‐Quan Tao (2025). Contributions of gradient electrode designs to the performance of PEMFCs: Modeling and optimization. International Communications in Heat and Mass Transfer.DOI
98. Pu He, Qianxi Zhang, Yu‐Tong Mu, Zhiguo Qu, Jia Yin, Ziai Li, Weiwei Yang, Saijie Cai, Junhong Chen, Wen‐Quan Tao (2025). Experimental investigation on the impact of ambient temperature and current load rate on the cold start behavior of a short PEMFC stack. Applied Energy.DOI
99. Zhuo Zhang, Hong-Bing Quan, Sai-Jie Cai, Zheng-Dao Li, Wen‐Quan Tao (2025). Design strategies for mainstream flow channels in large-area PEMFC: From typical units to large areas. Applied Energy.DOI
100. Guo-Rui Zhao, Wen‐Zhen Fang, Ling Han, Kaibo An, Yu-Hao Lu, Wen‐Quan Tao (2025). Boosting Performance of PEMFCs via Optimization of Oxygen Transport Resistance in Catalyst Layers Using Mesoporous Carbons. ACS Applied Energy Materials.DOI
101. Lei Xian, Zhengyan Li, Qiuyu Wang, Xirui Ding, Jiazhen Kong, Bowen Zuo, Lei Chen, Wen‐Quan Tao (2025). Optimization of ionomer distribution and oxygen transport in hydrogen fuel cell electrodes through carbon support surface functionalization: A molecular perspective study. Renewable Energy.DOI
102. Fan Bai, Zhiyi Tang, Ren-Jie Yin, Shu-Qi Jin, Lei Chen, Wen-Zhen Fang, Yu‐Tong Mu, Wen‐Quan Tao (2025). Optimization of the operational conditions of PEMFC by a novel CFD-DT-GA approach. Applied Energy.DOI
103. Hao-Bo Guo, Junyu Chen, Zhuyan Li, Xian-Hao Liu, Nan Li, Wen‐Quan Tao (2025). FNM-based rack model and CFD-FNM coupling framework for data center rack-level simulation. Building and Environment.DOI
104. Na Sun, Shuai Zhang, Nan Li, Fan Zhao, Xiangmiao Hao, Meng He, Zijian Li, Ruochen Ma, Ke Wang, Wen‐Quan Tao (2025). A fast design tool for compact heat exchangers tube geometry to enhance thermohydraulic performance using various AI models. Expert Systems with Applications.DOI
105. Sai-Jie Cai, Muchen Wang, Junhong Chen, Zhuo Zhang, Pu He, Wen‐Quan Tao (2025). An efficient neural-network-based image processing method for water quantification in a transparent proton exchange membrane fuel cell. Applied Energy.DOI
106. Rui-Long Wang, Ming-Jia Li, Wen-Quan Tao (2025). Advanced technology and applications of small-scale, modular, and distributed biomass direct air capture systems. Applied Energy.DOI
107. Zhiguo Qu, Jian-jun Zhu, Xu Zhang, Ming-xuan Fu, Ya‐Ling He, Wen-Quan Tao (2025). A full-factor model for nano-confined osmotic energy conversion with ionic volume and dielectric effects. Science China Technological Sciences.DOI
108. Guo-Rui Zhao, Wen‐Zhen Fang, Zi-Hao Xuan, Wen-Quan Tao (2025). Optimization of Gradient Catalyst Layers in PEMFCs Based on Neural Network Models. Energies.DOI
109. J. Z. Hong, Haoshuang Hua, Dongsheng Zhang, Zhenhao Li, Wen-Quan Tao (2025). Numerical investigation of refrigerant flashing flow in electronic expansion valves. International Journal of Heat and Fluid Flow.DOI
110. Yulong Yu, Qiang Zheng, Tianyi Zhang, Zhengyan Li, Lei Chen, Wen-Quan Tao (2025). Forecasting the output performance of PEMFCs via a novel deep learning framework considering varying operating conditions and time scales. Applied Energy.DOI
111. Yi-Jia Chen, Wen‐Zhen Fang, Guo-Rui Zhao, Fan Bai, Wen‐Quan Tao (2025). Optimizing current loading strategies for PEMFC stacks and predictions of needed powers for successful cold starts. Applied Thermal Engineering.DOI
112. Zhiyi Tang, Yifan Wu, Zhu Yang, Fan Bai, Yansheng Cao, Wen‐Quan Tao (2025). Performance analysis of feedback-controlled preheating process for molten salt storage tanks. Applied Thermal Engineering.DOI
113. S.H. Zhang, Wen‐Zhen Fang, Chun Li Yang, Wen‐Quan Tao (2025). Exploring the freezing-induced stress behavior of water in a partially saturated capillary. Applied Thermal Engineering.DOI
114. Zhiyi Tang, Fan Bai, Yufan Cao, Yifan Wu, Zhu Yang, Zihao Deng, Xianhao Liu, Chang Su, Wen‐Quan Tao (2025). A review study for physical characteristics and engineering perspectives of dual molten salt tanks. Applied Thermal Engineering.DOI
115. Guoqiu Liu, Shuangyu Lv, Zhengyan Li, Shuchang Li, Lei Chen, Wen‐Quan Tao (2025). Effect of gradient porosity distribution in gas diffusion layer on mass transfer and performance of ten-flow channel proton exchange membrane fuel cell. Energy.DOI
116. Guoqiu Liu, Lei Xian, Lei Chen, Wen‐Quan Tao (2025). Development and evaluation of a novel two-stage exponential current ramping strategy for low-temperature self-cold start of PEM fuel cells. Energy Conversion and Management.DOI
117. Zi-Xing Wang, Wen‐Quan Tao (2025). Numerical study on an air-cooling and liquid-cooling combined server for high-temperature data center application. Applied Thermal Engineering.DOI
118. Zheng-Dao Li, Li Chen, Lei Chen, Ya‐Ling He, Wen‐Quan Tao (2025). Heat transfer and pressure drop characteristics of a new manifold microchannel heat sink with an ultra-high heat flux of 1425 W/cm2 cooled by water. International Journal of Heat and Mass Transfer.DOI
119. Kaibo An, Wen‐Zhen Fang, Yu-Han Xu, Guo-Rui Zhao, Zi-Hao Xuan, Menglian Zheng, Wen‐Quan Tao (2025). Insights into the oxygen transport through thin films on platinum surfaces: Effects of oxidation and dissolution. International Journal of Heat and Mass Transfer.DOI
120. Yuqing Tang, Xiaojun Hu, Z M Wang, Chenghui Sun, Wen-Zhen Fang, Wen‐Quan Tao (2025). Enhanced pool boiling of Novec-7100 using nano/micro structured surfaces. International Journal of Heat and Mass Transfer.DOI
121. Lingran Gu, Li Chen, Qirui Yang, Xinjian Zheng, Chao Guo, Wen‐Quan Tao (2025). Topology optimization of convective heat transfer in microchannels under different working modes. Applied Thermal Engineering.DOI
122. Y.T. Li, Shu-Qi Jin, Xiaojun Hu, Zhanjun Wang, Zhiyang Li, Ming-Jia Li, Wen‐Quan Tao (2025). Examining performance of microchannel cold plate heat sink from its three parts along coolant flow direction and new structure designs based on the new considerations. Applied Thermal Engineering.DOI
123. Gangan Zhang, Wei Li, Desong Yang, Zengchao Chen, Christos N. Markides, Wen‐Tao Ji, Wen‐Quan Tao (2025). Integrated machine learning model for condensation flow heat transfer in smooth and enhanced tubes. Energy.DOI
124. Ji‐Wang Luo, Kentaro Yaji, Li Chen, Wen‐Quan Tao (2025). Data-driven multifidelity topology design for enhancing turbulent natural convection cooling. International Journal of Heat and Mass Transfer.DOI
125. 丁俣中，程想，万红牛，冀文涛，陶文铨（2024）. 涡轮叶片前腔冲击/气膜复合冷却与单一气膜冷却结构对比实验研究. 《推进技术》.DOI
126. 王一帆，王秋雨，曹涛锋，陈晨，陈磊，陶文铨（2024）. 高温下平纹编织碳/酚醛复合材料等效热导率的理论预测及分析. 《固体火箭技术》.
127. 卢昱皓，轩梓灏，沈法权，胡成卓，方文振，陶文铨（2024）. 凝相粒子相变及微观传热对喷管内两相流动换热的影响规律研究. 《固体火箭技术》.
128. 陈广亮，章汉琦，陶文铨（2024）. 堆芯燃料组件域横流轮系结构与特性研究. 《原子能科学技术》.
129. 罗纪旺，陈黎，郑鑫建，杨骐瑞，陶文铨（2024）. 面向金属泡沫散热器设计的自然对流拓扑优化. 《西安交通大学学报》.
130. 张严心，王梦祎，陈黎，周宇昊，陶文铨（2024）. Ca（OH）2脱水过程数值研究及强化. 《工程热物理学报》.
131. 万红牛，丁俣中，程想，陈黎，王进，冀文涛，陶文铨（2024）. 宽雷诺数下肋参数对U型内冷通道流动与换热特性影响的实验研究. 《西安交通大学学报》.
132. 袁义，李晓宇，张雨，陈黎，陶文铨（2024）. 单柱微通道流动沸腾换热数值模拟研究. 《工程热物理学报》.
133. 陈晓晴，钱浩，陈广亮，陶文铨（2024）. 压水堆燃料棒束域精细流态模拟与构型. 《工程热物理学报》.
134. 缐磊，曹涛锋，陈磊，陶文铨（2024）. 高温多组分混合气体热导率理论预测. 《工程热物理学报》.
135. Ji-Wang Luo, Li Chen, Yang Xia, Xinjian Zheng, Wenquan Tao (2024). Three-dimensional multi-scale topology optimization of porous heat sink with predetermined unit cells for natural convection heat transfer. International Journal of Heat and Mass Transfer.DOI
136. Xiang-Hua Cheng, Yu-Zhong Ding, Wen-Tao Ji, Li Chen, Wenquan Tao (2024). Experimental investigation on the combined cooling methods of jet impingement and film cooling for the pressure surface of the turbine vane leading cavity. International Journal of Heat and Mass Transfer.DOI
137. Yang Xia, Chao Guo, Enci Dong, Li Chen, Wenquan Tao (2024). Topology optimization of gas channels in proton exchange membrane fuel cells. International Journal of Heat and Mass Transfer.DOI
138. Yi Yuan, Li Chen, Chuangde Zhang, Wenquan Tao (2024). Numerical investigation and data-driven prediction of flow boiling heat transfer in manifold microchannels with slopes. Applied Thermal Engineering.DOI
139. Qirui Yang, Li Chen, Hanbing Ke, Lingran Gu, Xinjian Zheng, Sitong Li, Wenquan Tao (2024). Multi-layer topology optimization of dual-fluid convective heat transfer in printed circuit heat exchangers. Applied Thermal Engineering.DOI
140. Yi Yuan, Li Chen, Chuangde Zhang, Wenquan Tao (2024). Multi-Fidelity Design of Flow Boiling Heat Transfer Processes in Microchannels. ASME 2024 7th International Conference on Micro/Nanoscale Heat and Mass Transfer.DOI
141. Wenjing Ning, Xingbao Lyu, Yi Yuan, Li Chen, Wenquan Tao (2024). Comprehensive evaluation of proton exchange membrane fuel cell-based combined heat and power system with Lithium-ion battery under rule-based strategy. Journal of Energy Storage.DOI
142. Hangkai Wei, Xin Sha, Li Chen, Zi Wang, Chuangde Zhang, Peng He, Wenquan Tao (2024). Visualization of Multiphase Reactive Flow and Mass Transfer in Functionalized Microfluidic Porous Media. Small.DOI
143. Ziyang Guo, Chenqi Tian, Kunying Gong, Wei-Qiang Xu, Li Chen, Wenquan Tao (2024). Experimental study on the dynamic response of voltage and temperature of an open-cathode air-cooled proton exchange membrane fuel cell. International journal of hydrogen energy.DOI
144. Enci Dong, S. Cao, Ruiyuan Zhang, Li Chen, Wenquan Tao (2024). A One-Dimensional Numerical Model of Carbon Corrosion in Catalyst Layers of Proton Exchange Membrane Fuel Cells. Electrochimica Acta.DOI
145. Enci Dong, Han-Chen Zhao, Ruiyuan Zhang, Li Chen, Wenquan Tao (2024). Effects of gradient structures of cathode catalyst layers on performance and durability of proton exchange membrane fuel cells. Electrochimica Acta.DOI
146. Yan-Jun Dai, Jie Zhao, Xiuli Zhang, Fan Bai, Wenquan Tao, Yungang Wang (2024). Thermal full-field prediction of an air-cooled data center using a novel multi-scale approach based on POD and CFD coupling. Energy and Buildings.DOI
147. Chuangde Zhang, Li Chen, Xin Sha, Q. Kang, Zhen-Xue Dai, Wenquan Tao (2024). Computational microfluidics of reactive transport processes with solid dissolution and self-induced multiphase flow. Advances in Water Resources.DOI
148. Xue-Liang Wang, Yuhao Wu, Hui Cai, Zhaoguo Jin, Zhiguo Qu, Wenquan Tao (2024). Achieving triple improvements in intrinsic properties for porous flow field materials and the proton exchange membrane fuel cell electrochemical performance. Journal of Power Sources.DOI
149. Kunying Gong, Chenqi Tian, Ziyang Guo, Li Chen, Wei-Qiang Xu, Wenquan Tao (2024). Experimental investigation on the open cathode air-cooled proton exchange membrane fuel cells: Optimum operating parameters and control strategies. International journal of hydrogen energy.DOI
150. Yujie Chen, Junhua Gong, Wei Lu, Bohong Wang, Dongliang Sun, Bo Yu, Wei Zhang, Wenquan Tao (2024). A circle-based interface reconstruction algorithm based on the coupled volume-of-fluid and level set method. The Physics of Fluids.DOI
151. Chuangde Zhang, Li Chen, Ting Min, Q. Kang, Wenquan Tao (2024). Pore-scale modeling of effects of multiphase reactive transport on solid dissolution in porous media with structural heterogeneity. Chemical Engineering and Science.DOI
152. Xinjian Zheng, Li Chen, Ji-Wang Luo, Qirui Yang, Wenquan Tao (2024). Topology optimization of diffusion–reaction processes in hierarchical porous structures. Chemical Engineering and Science.DOI
153. Ruiyuan Zhang, Li Chen, Ting Min, Yu-Tong Mu, Liang Hao, Wenquan Tao (2024). Multiscale study of reactive transport and multiphase heat transfer processes in catalyst layers of proton exchange membrane fuel cells. Carbon Neutrality.DOI
154. Jing Wang, Zheng Li, Peng-Yu Lai, Rui Wang, Di-Xiang Yang, De-Wu Yang, Hui Xu, Wenquan Tao (2024). A Novel Paradigm in Solving Multiscale Problems.
155. Zi-Xing Wang, Zeng-Qun Li, Nan Li, Pu He, Lei Chen, Wen-Quan Tao (2024). Numerical simulation of a hybrid energy system proposed for low carbon data center. Applied Thermal Engineering.DOI
156. Faquan Shen, Wen‐Zhen Fang, Shengyun Zhang, Xuan Zhang, Chun Yang, Wen-Quan Tao (2024). Numerical simulations of freezing behaviors of water droplets impacting cold hydrophobic surfaces. Applied Thermal Engineering.DOI
157. Nan Li, Haowei Li, Kaiwen Duan, Wen‐Quan Tao (2024). Evaluation of the cooling effectiveness of air-cooled data centers by energy diagram. Applied Energy.DOI
158. Lei Xian, Zhengyan Li, Qiuyu Wang, Shuangyu Lv, Shuchang Li, Yulong Yu, Lei Chen, Wen‐Quan Tao (2024). Atomic-scale insights into the structure-activity relationship between water transport and water phase structure in proton exchange membranes with deposited Pt particles. Applied Energy.DOI
159. Kai-Bo An, Wen‐Zhen Fang, Zi-Hao Xuan, Guo-Rui Zhao, Ling Han, Wen‐Quan Tao (2024). Mechanisms of oxygen transport resistance of mesoporous carbon-supported catalysts in fuel cells. Journal of Materials Chemistry A.DOI
160. Yifan Wang, Yulong Yu, Tianyi Zhang, Lei Chen, Wen‐Quan Tao (2024). Flow prediction and dimensionless feature analysis in orifice microchannels under cavitation conditions based on similarity criteria. Physics of Fluids.DOI
161. Chao Guo, Li Chen, Wen‐Quan Tao (2024). Topology optimization of microreactors for hydrogen production by ammonia catalytic decomposition. International Journal of Hydrogen Energy.DOI
162. Yifan Wang, Tianyi Zhang, Lei Chen, Wen‐Quan Tao (2024). Multi-objective optimization of laser perforated fuel filter parameters based on artificial neural network and genetic algorithm. Particuology.DOI
163. Yuhao Lu, Wen‐Zhen Fang, Zi-Hao Xuan, Guo-Rui Zhao, Kai-Bo An, Wen‐Quan Tao (2024). Pore-scale modelling of reactive transport processes in catalyst layers with mesoporous carbon supports. International Communications in Heat and Mass Transfer.DOI
164. Shu-Qi Jin, Yujie Chen, Kong Ling, Weidong Xu, Wen‐Quan Tao (2024). 3D numerical investigation of bubble upflow condensation behaviors during subcooled flow boiling in mini-channel with VOSET. International Journal of Multiphase Flow.DOI
165. Zi-Hao Xuan, Wen‐Zhen Fang, Guo-Rui Zhao, Wen‐Quan Tao (2024). Optimal gradient designs of catalyst layers for boosting performance: A data-driven-assisted model. Applied Energy.DOI
166. Nan Li, Yigang Li, Xiao-Ming Gong, Wen‐Quan Tao (2024). Innovative server simulator for data centers and critical indices of performance evaluation. Energy and Buildings.DOI
167. Qiuyu Wang, Zhengyan Li, Lei Xian, Yulong Yu, Lei Chen, Wen‐Quan Tao (2024). Lifetime and efficiency analysis and optimization of PEMFC-based combined heat and power system with auxiliary heating for battery. International Journal of Hydrogen Energy.DOI
168. C.P. Wang, Hang Yu, Lei Xian, Guoqiu Liu, Lei Chen, Wen‐Quan Tao (2024). Study on the operation strategy of the water cooling system in the single-phase immersion cooling data center considering cooling tower performance. Energy and Buildings.DOI
169. Yujie Chen, Junhua Gong, Dongliang Sun, Dongxu Han, Peng Wang, Bo Yu, Wen‐Quan Tao (2024). A three-dimensional curve interface reconstruction algorithm for two-phase fluid flow. Journal of Computational Physics.DOI
170. Xin Sha, Li Chen, Chuangde Zhang, Hangkai Wei, Wen‐Quan Tao (2024). Pore-scale study of three-dimensional three-phase dynamic behaviors and displacement processes in porous media. Physics of Fluids.DOI
171. Pu He, Junhong Chen, Chen-Zi Zhang, Ziyan Yu, Mingyang Wang, Junyu Chen, Jia-Le Song, Yu‐Tong Mu, Kunying Gong, Wen‐Quan Tao (2024). Optimization of modeling and temperature control of air-cooled PEMFC based on TLBO-DE. Energy and AI.DOI
172. Ducheng Sun, Ersheng You, Ting Zhang, Jianjun Xu, Xiaokai Wang, Xingjie Ren, Wen‐Quan Tao (2024). A review of thermal contact conductance research of conforming contact surfaces. International Communications in Heat and Mass Transfer.DOI
173. Li Chen, Pang-Chieh Sui, Wen‐Quan Tao, Ned Djilali (2024). Fuel Cells – Polymer-Electrolyte Membrane Fuel Cell | Modeling. Elsevier eBooks.DOI
174. Lei Xian, Qiuyu Wang, Zhengyan Li, Shuchang Li, Shuangyu Lv, Yulong Yu, Lei Chen, Wen‐Quan Tao (2024). Analyzing and optimizing cathode gas distribution uniformity in proton exchange membrane fuel cell stacks based on two-phase flow network model. Journal of Power Sources.DOI
175. Fan Bai, Xiao-Ming Gong, Hao-Wei Li, Hao‐Bo Guo, Wen‐Quan Tao (2024). An improved black box model and the details of its numerical treatments for rack in data center simulation. International Communications in Heat and Mass Transfer.DOI
176. Yuhao Lu, Han Ling, Wen‐Zhen Fang, Zi-Hao Xuan, Faquan Shen, Shengyun Zhang, Wen‐Quan Tao (2024). Numerical modeling of heat transfer behavior for two-phase flow in a nozzle considering phase change. Numerical Heat Transfer Part A Applications.DOI
177. Zi-Xing Wang, Hao Shu Ding, Le Lei, Nan Li, Wen‐Quan Tao (2024). Numerical simulation on the flow and heat transfer characteristics in dimple/protrusion enhanced air handling unit in data center. International Communications in Heat and Mass Transfer.DOI
178. Junhong Chen, Pu He, Sai-Jie Cai, Ze-Hong He, Hao-Ning Zhu, Ziyan Yu, Lu-Zheng Yang, Wen‐Quan Tao (2024). Modeling and temperature control of a water-cooled PEMFC system using intelligent algorithms. Applied Energy.DOI
179. Yujie Chen, Wei Lu, Dongliang Sun, Bo Yu, Junhua Gong, Wei Zhang, Wen‐Quan Tao (2024). A horizontal refined piecewise curve interface reconstruction (HOPCIR) algorithm for reconstructing the vapor-liquid interface. International Journal of Multiphase Flow.DOI
180. Yujie Chen, Kong Ling, Xiaoyu Zhang, Yue Xiang, Dongliang Sun, Bo Yu, Wei Zhang, Wen‐Quan Tao (2024). Application of IDEAL algorithm based on the collocated unstructured grid for incompressible flows. Computational Geosciences.DOI
181. Yujie Chen, Bohong Wang, Bo Gao, Wei Li, Dongliang Sun, Wei Zhang, Dongxu Han, Wen‐Quan Tao, Bo Yu (2024). Contributions of microlayer to flow boiling heat transfer in the mini-channel. Journal of Cleaner Production.DOI
182. Tianyu Wu, Jianfei Zhang, Yanjun Dai, Tao-Feng Cao, Kong Ling, Wen‐Quan Tao (2024). Implementation of IDEAL algorithm based on Delaunay triangular mesh for 2D-compressible flows. Engineering Computations.DOI
183. Chuang-Yao Zhao, Chen-Min Zheng, Xiaosong Wang, Di Qi, Jun-Min Jiang, Wen‐Tao Ji, Pu-Hang Jin, Wen‐Quan Tao (2024). Correlations of falling film hydrodynamics and heat transfer on horizontal tubes: A review. Renewable and Sustainable Energy Reviews.DOI
184. Peng He, Jing Ding, Le Lei, Wen‐Quan Tao (2024). A four-electrode droplet triboelectric nanogenerator providing multimodal output. Cell Reports Physical Science.DOI
185. Xiang-You Feng, Fan Bai, Hao Shu Ding, Wen‐Quan Tao (2024). An improved POD-Galerkin method for rapid prediction of three-dimensional temperature field for an IGBT module. International Communications in Heat and Mass Transfer.DOI
186. Yi Du, Guo‐Hui Ou, Pu-Hang Jin, Chuang-Yao Zhao, Wen‐Tao Ji, Ding-Cai Zhang, Wen‐Quan Tao (2024). EFFECT OF GEOMETRICAL PARAMETERS ON THE THERMAL-HYDRAULIC PERFORMANCE OF INTERNAL HELICALLY RIBBED TUBES. Enhanced heat transfer/Journal of enhanced heat transfer.DOI
187. Zhuo Zhang, Zhendao Li, Wanyu Lin, Junyu Chen, Wen‐Quan Tao (2024). Effect of Cooling Flow Channels on the In-plane Temperature Distribution in PEMFC. Lecture notes in mechanical engineering.DOI
188. Ruoxuan Fan, Zeng-Qun Li, Huiming Zhang, Wen‐Quan Tao (2024). Analysis of a combined heating and power system based on high-temperature proton exchange membrane fuel cell and steam methane reforming: From energy, exergy and economic point of views. Applied Thermal Engineering.DOI
189. Fan Bai, Pu He, Yu‐Tong Mu, Wen‐Quan Tao (2024). Comparison of the Three-Generation Numerical Models for Proton Exchange Membrane Fuel Cell Multi-physics Prediction. Lecture notes in mechanical engineering.DOI
190. Xiang-You Feng, Fan Bai, Hao Shu Ding, Wen‐Quan Tao (2024). A Preliminary Exploration of the Coupling Algorithm of the POD-Galerkin Method and FVM in the Temperature Simulation for an IGBT Module. Lecture notes in mechanical engineering.DOI
191. Zhiyi Tang, Li Chen, Zhuo Zhang, Wen‐Quan Tao (2024). Heat Transfer and Laminar Flow Characteristics and Correlations of Single-Phase Wavy Microchannel. Lecture notes in mechanical engineering.DOI
192. Tianyi Zhang, Yifan Wang, Yulong Yu, Lei Chen, Wen-Quan Tao (2024). Multi-objective optimization of hybrid preheating strategies for Lithium-ion batteries in low temperature. Journal of Energy Storage.DOI
193. Xiang-You Feng, Fan Bai, Hao Shu Ding, Wen-Quan Tao (2024). A coupling algorithm of the POD–Galerkin method and FVM for heat transfer problems. Journal of Thermal Analysis and Calorimetry.DOI
194. Junhong Chen, Pu He, Ze-Hong He, Jia-Le Song, Xianhao Liu, Yun-Tian Xiao, Mingyang Wang, Lu-Zheng Yang, Yu‐Tong Mu, Wen-Quan Tao (2024). Multi-objective decoupling control of thermal management system for PEM fuel cell. Energy and AI.DOI
195. Yulong Yu, Shuangyu Lv, Qiuyu Wang, Lei Xian, Lei Chen, Wen-Quan Tao (2024). A two-stage framework for quantifying the impact of operating parameters and optimizing power density and oxygen distribution quality of PEMFC. Renewable Energy.DOI
196. Yifan Wang, Qiuyu Wang, Shuangyu Lv, Bowen Zuo, Lei Chen, Tao-Feng Cao, Chen Chen, Wen-Quan Tao (2024). Investigation on thermal conductivities of plain-woven carbon/phenolic and silica/phenolic composites at high temperature: Theoretical prediction and experiment. Composites Science and Technology.DOI
197. Zhengyan Li, Lei Xian, Qiuyu Wang, Junwei Wang, Lei Chen, Wen-Quan Tao (2024). Performance enhancement of proton exchange membrane fuel cell by utilizing a blocked regulated tri-serpentine flow field: Comprehensive optimization with variable block heights and multiple auxiliary channels. Applied Energy.DOI
198. Shu-Qi Jin, Renjie Yin, Yuting Li, Wen-Quan Tao (2024). Numerical Investigation on Heat Transfer Performance of a Single-Phase Immersion Cooling System. Lecture notes in mechanical engineering.DOI
199. Yu-Qing Tang, Wen-Zhen Fang, Chun-Yu Zheng, Wen‐Quan Tao (2024). Applications of POD-based reduced order model to the rapid prediction of velocity and temperature in data centers. Applied Thermal Engineering.DOI
200. Yi Yuan, Li Chen, Qirui Yang, Hanbing Ke, Lingran Gu, Wen‐Quan Tao (2024). Multi-fidelity topology optimization of flow boiling heat transfer in microchannels. International Journal of Heat and Mass Transfer.DOI
201. Wei Ming Zhu, Wanyu Lin, Shuai Zhang, Siyuan Yang, Tianyu Wu, Ruochen Ma, Tao-Feng Cao, Yanjun Dai, Wen‐Quan Tao (2024). Modeling and analysis of fluid-solid coupling heat transfer and fluid flow in transonic nozzle. Applied Thermal Engineering.DOI
202. Yifan Wang, Qiuyu Wang, Lei Chen, Wen‐Quan Tao (2024). Numerical investigation of performance and multiparameter prediction model of high-pressure fuel filters and cavitation at filtration orifices considering variable fluid properties. International Journal of Heat and Mass Transfer.DOI
203. Yanjun Dai, Jie Zhao, Xiaoli Gui, Yungang Wang, Wen‐Quan Tao, Zhenhai Zou, Fan Bai (2024). A fast and high-fidelity multi-parameter thermal-field prediction system based on CFD and POD coupling: Application to the RPV insulation structure. International Journal of Heat and Mass Transfer.DOI
204. Guo‐Hui Ou, Zhao‐Ren Li, Wen‐Tao Ji, Wen‐Quan Tao (2024). A fully coupled Pressure-Based method for compressible flows at all Mach numbers. Applied Thermal Engineering.DOI
205. Zhuo Zhang, Sai-Jie Cai, Zheng-Dao Li, Wen‐Quan Tao (2024). Electrical and thermal performance analysis of PEMFC with coolant flow field under steady-state condition. Energy.DOI
206. Na Sun, Na Sun, Shuai Zhang, Haobo Guo, Fan Zhao, Nan Li, Meng He, Zijian Li, Ruochen Ma, Ke Wang, Wen‐Quan Tao, Wen‐Quan Tao (2024). A parametric optimization framework for fin-and-tube heat exchangers based on response surface methodology and artificial intelligence. Applied Thermal Engineering.DOI
207. Jinbo Li, Tianyi Zhang, Zheng-Dao Li, Lei Chen, Wen‐Quan Tao (2024). Multi-objective parameter optimization design of tapered-type manifold/variable cross-section microchannel heat sink. Applied Thermal Engineering.DOI
208. Qiuyu Wang, Zhengyan Li, Lei Xian, Yulong Yu, Lei Chen, Wen‐Quan Tao (2024). A current density distribution reconstruction method in proton exchange membrane fuel cell from external magnetic field based on convolutional neural network. Energy Conversion and Management.DOI
209. Yujie Chen, Bo Yu, Wei Lu, Bohong Wang, Dongliang Sun, Kaituo Jiao, Wei Zhang, Wen‐Quan Tao (2024). Review on numerical simulation of boiling heat transfer from atomistic to mesoscopic and macroscopic scales. International Journal of Heat and Mass Transfer.DOI
210. Zi-Hao Xuan, Wen‐Zhen Fang, Yu-Hao Lu, Chun Yang, Wen‐Quan Tao (2024). Significance of the natural convection to the heat transfer of porous media: A pore-scale study. International Journal of Heat and Mass Transfer.DOI
211. Zhengyan Li, Lei Xian, Yanyu Chen, Lei Chen, Wen‐Quan Tao (2024). Performance evaluation of a blocked regulated lateral release channel for proton exchange membrane fuel cell based on entropy generation analysis. Energy Conversion and Management.DOI
212. 何璞，夏强峰，蒋理想，陈黎，母玉同，和鹏，陶文铨（2023）. 阴极催化层铂载量对低温启动过程的影响. 《西安交通大学学报》.
213. 刘斌，耿士江，李政道，朱胜民，王子星，张卓，陶文铨（2023）. 酒窝型板式换热器流动换热特性分析及优化. 《暖通空调》.
214. 彭明，夏强峰，蒋理想，陈黎，陶文铨（2023）. 阴极过量系数与流场布置对风冷燃料电池性能影响的数值模拟. 《化工学报》.
215. 程想，丁俣中，万红牛，冀文涛，陶文铨（2023）. 冲击孔位置对涡轮叶片冲击/气膜复合冷却特性影响的实验研究. 《西安交通大学学报》.
216. 陈开元，陈磊，陶文铨（2023）. 燃料电池阴极扩散层扩散特性研究. 《工程热物理学报》.
217. Xiang Lin Cheng, Wen‐Tao Ji, Yu-Zhong Ding, Ya‐Ling He, Hong-Niu Wan, Wen-Quan Tao (2023). Experimental investigation on the effect of impingement hole location on vane impingement/film cooling. Proceedings.DOI
218. Guobin Zhang, Zhiguo Qu, Wen‐Quan Tao, Yu‐Tong Mu, Kui Jiao, Hui Xu, Yun Wang (2023). Advancing next-generation proton-exchange membrane fuel cell development in multi-physics transfer. Joule.DOI
219. Lei Xian, Shuchang Li, Shuangyu Lv, Lei Chen, Wen‐Quan Tao (2023). Impact of deposited Pt particles on water channel connectivity and proton conductivity in proton exchange membranes: A molecular dynamics study. International Journal of Hydrogen Energy.DOI
220. Xingbao Lyu, Yuan Yi, Wenjing Ning, Li Chen, Wen‐Quan Tao (2023). Investigation and optimization of PEMFC-CHP systems based on Chinese residential thermal and electrical consumption data. Applied Energy.DOI
221. Yujie Chen, Jun-Hua Gong, Jing Ding, Bo Yu, Ming-Jia Li, Yigang Li, Wen‐Quan Tao (2023). Lattice Boltzmann method study of pool boiling on an electrowetting substrate. International Communications in Heat and Mass Transfer.DOI
222. Ren-Jie Yin, Wen-Chao Zeng, Fan Bai, Li Chen, Wen‐Quan Tao (2023). Study on the effects of manifold structure on the gas flow distribution uniformity of anode of PEMFC stack with 140-cell. Renewable Energy.DOI
223. Yanjun Dai, Ji-Wei Shi, Xu-Liang Cheng, Zhuo Zhang, Ying-Qi He, Wen‐Quan Tao (2023). Numerical study on the cavitation flow characteristics of high-pressure fuel in injector orifices based on compressible non-isothermal model. AIP Advances.DOI
224. Yuan Yi, Li Chen, Xingbao Lyu, Wenjing Ning, Wenqi Liu, Wen‐Quan Tao (2023). Modeling and optimization of a residential PEMFC-based CHP system under different operating modes. Applied Energy.DOI
225. Ji‐Wang Luo, Li Chen, Xia Yang, Xinjian Zheng, Wen‐Quan Tao (2023). Topology optimization of natural convection using porous metal foam based on the adjoint lattice Boltzmann method and level set method. Computers & Fluids.DOI
226. Lei Chen, Kunfeng Zhao, Wen‐Quan Tao (2023). Research on one-dimensional digital twin algorithm of plate heat exchanger. Numerical Heat Transfer Part A Applications.DOI
227. Zi Wang, Hangkai Wei, Zhiwu He, Xiaochun Liu, Ming-Jia Li, Wen‐Quan Tao (2023). Effects of Cassie-Wenzel wetting transition on two-phase flow in porous media. International Communications in Heat and Mass Transfer.DOI
228. Yanyu Chen, Lei Chen, Wen‐Quan Tao (2023). Impact of Schroeder's paradox on cold start-up failure of proton exchange membrane fuel cells: Three-dimension simulation based on OpenFOAM. International Communications in Heat and Mass Transfer.DOI
229. Mengyi Wang, Li Chen, Yanxin Zhang, Wen‐Quan Tao (2023). Numerical study of the dehydration and hydration processes of the Ca(OH)2/CaO system in an indirect-direct reactor. Journal of Energy Storage.DOI
230. Baobao Hu, Zhiguo Qu, Wen‐Quan Tao (2023). A comprehensive system-level model for performance evaluation of proton exchange membrane fuel cell system with dead-ended anode mode. Applied Energy.DOI
231. Xing-Jie Ren, Qingfeng Tang, Heng Zhang, Jianrong Zhang, Mu Du, Wen‐Quan Tao (2023). Numerical study on the effect of thermal pad on enhancing interfacial heat transfer considering thermal contact resistance. Case Studies in Thermal Engineering.DOI
232. C. L. Wang, Wen‐Tao Ji, Chuang-Yao Zhao, Li Chen, Wen‐Quan Tao (2023). Experimental determination of the role of roughness and wettability on pool-boiling heat transfer of refrigerant. International Journal of Refrigeration.DOI
233. Fan Bai, Ren-Jie Yin, Jinyang Liao, Zhuo Zhang, Sai-Jie Cai, Yu‐Tong Mu, Li Chen, Lei Chen, Wen‐Quan Tao (2023). Eccentricity design for the coolant distribution optimization of a practical commercial-size proton exchange membrane fuel cell stack using a novel proper orthogonal decomposition based analysis model. Applied Energy.DOI
234. Xiang Cheng, Qiu-Nan Yu, Wen‐Tao Ji, Junmei Wu, Ya‐Ling He, Wen‐Quan Tao (2023). Numerical study on the effect of different internal angled ribs on the external film cooling performance. Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy.DOI
235. Zexi Li, Fan Bai, Pu He, Zhuo Zhang, Wen‐Quan Tao (2023). Three-dimensional performance simulation of PEMFC of metal foam flow plate reconstructed with improved full morphology. International Journal of Hydrogen Energy.DOI
236. Zhuo Zhang, Fan Bai, Pu He, Zexi Li, Wen‐Quan Tao (2023). A novel cathode flow field for PEMFC and its performance analysis. International Journal of Hydrogen Energy.DOI
237. Hang Yu, Tianyi Zhang, Lei Chen, Wen‐Quan Tao (2023). Refrigeration equipment model construction based in data center cooling station. International Journal of Green Energy.DOI
238. Hao Shu Ding, Yujie Chen, Wen‐Quan Tao (2023). The optimization of the compact upwind scheme for incompressible flow. Physics of Fluids.DOI
239. Zhuo Zhang, Wen‐Quan Tao (2023). Effect of assembly pressure on the performance of proton exchange membrane fuel cell. Energy Storage and Saving.DOI
240. Shu-Qi Jin, Nan Li, Fan Bai, Yujie Chen, Xiang-You Feng, Hao-Wei Li, Xiao-Ming Gong, Wen‐Quan Tao (2023). Data-driven model reduction for fast temperature prediction in a multi-variable data center. International Communications in Heat and Mass Transfer.DOI
241. Yanyu Chen, Lei Chen, Wen‐Quan Tao (2023). Modeling transport of membrane water in PEMFC and energy loss analysis at −20 °C based on mathematical boundedness. International Journal of Hydrogen Energy.DOI
242. Ya‐Ling He, Wenqi Wang, Rui Jiang, Ming-Jia Li, Wen‐Quan Tao (2023). Liquid-based high-temperature receiver technologies for next-generation concentrating solar power: A review of challenges and potential solutions. Frontiers in Energy.DOI
243. Zhiyi Tang, Wen‐Quan Tao (2023). THERMAL AND MECHANICAL DESIGN, ANALYSIS AND EVALUATION OF MOLTEN SALT TANKS FOR CONCENTRATING SOLAR POWER PLANTS. International Heat Transfer Conference (IHTC).DOI
244. Xiang-You Feng, Fan Bai, Wen‐Quan Tao (2023). A NEW EFFICIENT CONSERVATION-BASED METHOD FOR IMPLEMENTING POD-GALERKIN PROJECTION. International Heat Transfer Conference (IHTC).DOI
245. Umesh Madanan, Wojciech Lipiński, Terrence W. Simon, Alptekin Aksan, Faruk Arinç, Yıldız Bayazıtoğlu, John C. Bischof, Jaime G. Cervantes, Ping Cheng, Pedro Jorge Coelho, Renato M. Cotta, M. Cumo, Jane H. Davidson, Siaka Dembele, Paolo Di Marco, Leonid A. Dombrovsky, Ivan Vladimirovich Egorov, Timothy S. Fisher, Leroy S. Fletcher, Steven L. Girshick, Costas P. Grigoropoulos, Ulrich Groß, Kemal Hanjalić, Abel Hernández-Guerrero, John R. Howell, Sergey Aleksandrovich Isaev, Yogesh Jaluria, Артем Артемович Халатов, Thomas H. Kuehn, Francis A. Kulacki, Denis Lemonnier, Raj M. Manglik, Shigenao Maruyama, M. Pınar Mengüç, Josua Petrus Meyer, Wally J. Minkowycz, Michael F. Modest, Abdulmajeed A. Mohamad, Andrzej Józef Nowak, Helcio R. B. Orlande, Jacques Padet, Suhas V. Patankar, David Y.H. Pui, James Ramsey, Yelena Shafeyeva, Evgueni M. Smirnov, V. Srinivasan, Aldo Steinfeld, Peter Stephan, Janusz S. Szmyd, Kumar K. Tamma, Wen‐Quan Tao, Ilker Tari, John Thome, Victoria Timchenko, Leonard Leonardovich Vasiliev, Qiuwang Wang, Brent W. Webb, William M. Worek, Hideo Yoshida, Xing Zhang, Tianshou S. Zhao, G. Ziskind (2023). IN MEMORIAM: RICHARD J. GOLDSTEIN. Computational Thermal Sciences An International Journal.DOI
246. Zhao-Jun Liu, Wen‐Quan Tao, Ning Tian, Ling Juan Zhao (2023). THERMAL ENVIRONMENT PREDICTION AND PROTECTION DESIGN FOR HIGH TEMPERATURE SUPERSONIC COMBUSTION TUNNEL. International Heat Transfer Conference (IHTC).DOI
247. Shu-Qi Jin, Yujie Chen, Kong Ling, Yuan Zhou, Wen‐Quan Tao (2023). EXPERIMENTAL STUDY OF FLOW BOILING PATTERNS IN A VERTICAL RECTANGULAR CHANNEL UNDER HIGH-PRESSURE CONDITIONS. International Heat Transfer Conference (IHTC).DOI
248. Zhao‐Ren Li, Guo‐Hui Ou, Zihan Wang, Kong Ling, Wen‐Tao Ji, Wen‐Quan Tao (2023). Stability analysis of coupled Navier-Stokes solver in transient problems of incompressible flow. International Heat Transfer Conference (IHTC).DOI
249. Kun Huang, Xiang Cheng, Xi Yang, Jiang Lei, Wen‐Tao Ji, Wen‐Quan Tao (2023). Experimental and numerical investigation on the film-cooling a gas turbine vane pressure side with various internal rib angles. Applied Thermal Engineering.DOI
250. Ji‐Wang Luo, Li Chen, Hanbing Ke, Chuangde Zhang, Xia Yang, Wen‐Quan Tao (2023). Three-dimensional topology optimization of natural convection using double multiple-relaxation-time lattice Boltzmann method. Applied Thermal Engineering.DOI
251. Ming Peng, Li Chen, Kunying Gong, Wen‐Quan Tao (2023). Effects of cathode gas channel design on air-cooled proton exchange membrane fuel cell performance. Applied Thermal Engineering.DOI
252. Faquan Shen, Wen‐Zhen Fang, Fangqi Zhu, Delin Chai, Wen‐Quan Tao (2023). Freezing behaviors of an impacting droplet on subcooled hydrophobic surfaces. Applied Thermal Engineering.DOI
253. Zi-Xing Wang, Hao Shu Ding, Le Lei, Nan Li, Wen‐Quan Tao (2023). Designing air handling unit in data center and estimating its performance. International Journal of Heat and Mass Transfer.DOI
254. Xiang Cheng, Zhao‐Ren Li, Hong-Niu Wan, Wen‐Tao Ji, Ya‐Ling He, Wen‐Quan Tao (2023). Effect of mass flow ratios on the conjugate heat transfer of a metal turbine vane at medium temperature. International Journal of Heat and Mass Transfer.DOI
255. Lei Xian, Zhengyan Li, Shuchang Li, Lei Chen, Wen‐Quan Tao (2023). Elucidating the impact mechanism of temperature and water content on thermal conductivity of hydrated Nafion membranes by molecular dynamics simulation. International Journal of Heat and Mass Transfer.DOI
256. Yujie Chen, Shu-Qi Jin, Bo Yu, Kong Ling, Dongliang Sun, Wei Zhang, Kaituo Jiao, Wen‐Quan Tao (2023). Modeling and study of microlayer effects on flow boiling in a mini-channel. International Journal of Heat and Mass Transfer.DOI
257. Ibrahim Mostafa, Pu-Hang Jin, Wen‐Tao Ji, Wen‐Quan Tao (2023). An experimental study of the inundation effect on filmwise condensation heat transfer over horizontal smooth and enhanced tubes. International Journal of Heat and Mass Transfer.DOI
258. Dongliang Sun, Wen‐Quan Tao (2023). Performance analysis and comparison of IDEAL and SIMPLERR algorithms for incompressible fluid flow and heat transfer problems. International Journal of Heat and Mass Transfer.DOI
259. Wenqi Wang, Ming-Jia Li, Jiaqi Guo, Wen‐Quan Tao (2023). A feedforward-feedback control strategy based on artificial neural network for solar receivers. Applied Thermal Engineering.DOI
260. Ning Sun, Wan-Ruo Lu, Yuan Ma, Meng-Zheng Zhang, Li Chen, Wen‐Tao Ji, Ya‐Ling He, Wen‐Quan Tao (2023). An experimental and numerical study on the liquid cooling of a gas turbine blade. Applied Thermal Engineering.DOI
261. 陶文铨，靳姝琦，李楠，戴艳俊（2022）. 数据中心机房气流组织仿真技术探讨. 《邮电设计技术》.
262. 许伟东，陶文铨（2022）. “减碳”目标下制冷空调行业发展方向. 《制冷技术》.
263. 王晨洁，陶文铨，杨文刚，马奕新，秦德金，李福（2022）. 空间太阳观测入射窗组件热分析与试验验证. 《光子学报》.
264. 雷乐，李楠，赵波，陶文铨（2022）. 大型板翅式换热器出口温度均匀性的数值分析. 《计算机仿真》.
265. 刘丽娜，陈黎，陶文铨（2022）. 基于相场法的多孔介质三相相对渗透率的研究. 《工程热物理学报》.
266. 陈宇杰，凌空，靳姝琦，宇波，陶文铨（2022）. 一种基于VOSET方法的三维矩形截面通道内流动沸腾传热数值模拟方法. 《工程热物理学报》.
267. 彭明，夏强峰，蒋理想，张瑞元，郭凌燚，陈黎，陶文铨（2022）. 流道布置对风冷燃料电池性能影响的研究. 《化工学报》.
268. 李晓宇，陶文铨（2022）. 干湿工况平直翅片传热传质特性数值模拟. 《工程热物理学报》.
269. Guobin Zhang, Zhiguo Qu, Wen‐Quan Tao, Xueliang Wang, Lizhen Wu, Siyuan Wu, Xu Liang Xie, Chasen Tongsh, Wenming Huo, Zhiming Bao, Kui Jiao, Yun Wang (2022). Porous Flow Field for Next-Generation Proton Exchange Membrane Fuel Cells: Materials, Characterization, Design, and Challenges. Chemical Reviews.DOI
270. Mingjie Li, Xiangqiang Cheng, Jinjia Wei, Wen‐Quan Tao (2022). Lattice Boltzmann simulation of condensation on self-cleaning porous membrane. International Communications in Heat and Mass Transfer.DOI
271. Yujie Chen, Wei Lü, Bo Yu, Wen‐Quan Tao, Wenjing Zhou, Qun Cao (2022). A revised Lennard-Jones potential for bubble nucleation study of argon based on the molecular dynamics simulation method. Journal of Molecular Liquids.DOI
272. Fan Bai, Wen‐Quan Tao (2022). Projection Diagram for Determining Polarization Curves under Variation of Activation Criterion Using Similarity Theory. ACS Omega.DOI
273. Yang Xia, Li Chen, Ji‐Wang Luo, Wen‐Quan Tao (2022). Numerical investigation of microchannel heat sinks with different inlets and outlets based on topology optimization. Applied Energy.DOI
274. Xin Sha, Li Chen, Xiaofei Zhu, Sen Wang, Qihong Feng, Wen‐Quan Tao (2022). Pore-scale study of three-phase reactive transport processes in porous media. Physics of Fluids.DOI
275. Yu‐Tong Mu, Pu He, Fan Bai, Li Chen, Zhiguo Qu, Wen‐Quan Tao (2022). Numerical analyses on oxygen transport resistances in polymer electrolyte membrane fuel cells using a novel agglomerate model. International Journal of Hydrogen Energy.DOI
276. Wen‐Zhen Fang, Fangqi Zhu, Faquan Shen, Wen‐Quan Tao (2022). Asymmetric freezing behaviors of inclined impact of water droplets on cold hydrophobic surfaces. International Communications in Heat and Mass Transfer.DOI
277. Zi Wang, Li Chen, Hangkai Wei, Zhenxue Dai, Qinjun Kang, Wen‐Quan Tao (2022). Pore-scale study of mineral dissolution in heterogeneous structures and deep learning prediction of permeability. Physics of Fluids.DOI
278. Lei Chen, Yifan Wang, Jiří Jaromír Klemeš, Jin Wang, Wen‐Quan Tao (2022). Study on collision between single coarse particle and wall in viscous media using CFD–DEM. European Journal of Mechanics - B/Fluids.DOI
279. Chuang-Yao Zhao, Zhuo-Liang Yao, Di Qi, Wen‐Tao Ji, Wen‐Quan Tao (2022). Hydrodynamics and thermal performance of turbulent falling films through horizontal tube bundles. International Journal of Multiphase Flow.DOI
280. Yujie Chen, Ge-Ge Song, Kong Ling, Bo Yu, Dongliang Sun, Wei Lu, Wen‐Quan Tao (2022). Numerical investigation of subcooled flow boiling in an inclined rectangular mini-channel at a low flow rate. Physics of Fluids.DOI
281. Ji‐Wang Luo, Li Chen, An He, Wen‐Quan Tao (2022). Topology optimization of convective heat transfer by the lattice Boltzmann method. International Journal for Numerical Methods in Fluids.DOI
282. Fu Wang, Victor Nian, Pietro Elia Campana, Jakub Jurasz, Hailong Li, Ming-Jia Li, Wen‐Quan Tao, Jinyue Yan (2022). Do ‘green’ data centres really have zero CO2 emissions? Sustainable Energy Technologies and Assessments.DOI
283. Zi-Xiang Tong, Ming-Jia Li, Zhaolin Gu, Junjie Yan, Wen‐Quan Tao (2022). A Gaussian process regression accelerated multiscale model for conduction-radiation heat transfer in periodic composite materials with temperature-dependent thermal properties. Advances in Aerodynamics.DOI
284. Bing-Lin Bai, Shen Du, Ming-Jia Li, Xiaodai Xue, Wen‐Quan Tao (2022). A novel solar-driven water and electricity cogeneration integrated system by multistage vaporization enthalpy recycling. Desalination.DOI
285. Ming Peng, Enci Dong, Li Chen, Yu Wang, Wen‐Quan Tao (2022). Effects of Cathode Gas Diffusion Layer Configuration on the Performance of Open Cathode Air-Cooled Polymer Electrolyte Membrane Fuel Cell. Energies.DOI
286. Wen‐Zhen Fang, Yuqing Tang, Wen‐Quan Tao (2022). Transient thermal performance of multilayer thermal protection systems doped with phase change materials. Numerical Heat Transfer Part A Applications.DOI
287. Lei Xian, Lei Chen, Heqing Tian, Wen‐Quan Tao (2022). Enhanced thermal energy storage performance of molten salt for the next generation concentrated solar power plants by SiO2 nanoparticles: A molecular dynamics study. Applied Energy.DOI
288. Ruiyuan Zhang, Ting Min, Li Bo Chen, Hailong Li, Jinyue Yan, Wen‐Quan Tao (2022). Pore-scale study of effects of relative humidity on reactive transport processes in catalyst layers in PEMFC. Applied Energy.DOI
289. Xing-Jie Ren, Jian‐Jun Gou, Yanjun Dai, Wen‐Quan Tao (2022). Exploring thermal contact conductance between two contact solids by artificial neural network. International Communications in Heat and Mass Transfer.DOI
290. Chuang-Yao Zhao, Li-Wen Liang, Di Qi, Wen‐Tao Ji, Wen‐Quan Tao (2022). The effect of gas streams on the hydrodynamics, heat and mass transfer in falling film evaporation, absorption, cooling and dehumidification: A comprehensive review. Building and Environment.DOI
291. Pu-Hang Jin, Xiao Yan, Muhammad Jahidul Hoque, Kazi Fazle Rabbi, Soumyadip Sett, Jingcheng Ma, Jiaqi Li, Xiaolong Fang, James Carpenter, Saijie Cai, Wen‐Quan Tao, Nenad Miljkovic (2022). Ultra-low ice-substrate adhesion and self-deicing during droplet impact freezing. Cell Reports Physical Science.DOI
292. Zhuo Zhang, Ji-Wei Shi, Xu-Liang Cheng, Yanjun Dai, Wen‐Quan Tao (2022). Numerical examination of high-pressure fuel injection in common rail injector based on hydro-mechanical model. Physics of Fluids.DOI
293. Wei-Dong Xu, Zhaogang Qi, Lizhi Wang, Xiao-Dan Yang, Qiang Gao, Ling-Jie Huang, Wen‐Quan Tao (2022). Study of two-phase flow distribution in microchannel heat exchanger header - A numerical simulation. International Journal of Thermofluids.DOI
294. Zhuo Zhang, Fan Bai, Hong-Bing Quan, Ren-Jie Yin, Wen‐Quan Tao (2022). PEMFC Output Voltage Prediction Based on Different Machine Learning Regression Models. International Conference on Energy, Electrical and Power Engineering (CEEPE).DOI
295. Xiaofei Zhu, Li Chen, Sen Wang, Qihong Feng, Wen‐Quan Tao (2022). Pore-scale study of three-phase displacement in porous media. Physics of Fluids.DOI
296. Wen‐Zhen Fang, Fangqi Zhu, Lailai Zhu, Wen‐Quan Tao, Chun Yang (2022). Self-peeling of frozen water droplets upon impacting a cold surface. Communications Physics.DOI
297. Ming Peng, Li Chen, Ruiyuan Zhang, Weiqiang Xu, Wen‐Quan Tao (2022). Improvement of thermal and water management of air-cooled polymer electrolyte membrane fuel cells by adding porous media into the cathode gas channel. Electrochimica Acta.DOI
298. Mengyi Wang, Li Chen, Yuhao Zhou, Wen‐Quan Tao (2022). Numerical simulation of the calcium hydroxide/calcium oxide system dehydration reaction in a shell-tube reactor. Applied Energy.DOI
299. P. Yuan, Zeng Qinghui, Yongmei Wu, Yuling Lü, Chaolong Hu, H. C Sun, Wen‐Quan Tao (2022). Experimental study of using aerofoils in a refrigerated display cabinet. International Journal of Thermofluids.DOI
300. Hangkai Wei, Xiaofei Zhu, Xiaochun Liu, Haien Yang, Wen‐Quan Tao, Ming-Jia Li (2022). Pore-scale study of drainage processes in porous media with various structural heterogeneity. International Communications in Heat and Mass Transfer.DOI
301. Wen‐Quan Tao, Li Chen, Kong Ling, Yujie Chen (2022). SOME ADVANCES IN NUMERICAL SIMULATIONS OF MULTISCALE HEAT TRANSFER PROBLEMS AND PARTICULARLY FOR BOILING HEAT TRANSFER. Annual Reviews of Heat Transfer.DOI
302. Peng-Yi Cui, Feng Yang, Jiaqi Wang, Weiqiu Chen, Yuandong Huang, Wen-Quan Tao (2022). Numerical studies on Re-independence and influence region definition for flow and dispersion within street-indoor scale model. Building and Environment.DOI
303. Peng-Yi Cui, Jiaqi Wang, Feng Yang, Qingxia Zhao, Yuandong Huang, Yong Yang, Wen-Quan Tao (2022). Effects of Radiant Floor Heating Integrated with Natural Ventilation on Flow and Dispersion in a Newly Decorated Residence. International Journal of Environmental Research and Public Health.DOI
304. Lei Chen, Yanyu Chen, Wen-Quan Tao (2022). Schroeder's paradox in proton exchange membrane fuel cells: A review. Renewable and Sustainable Energy Reviews.DOI
305. Fan Bai, Hong-Bing Quan, Ren-Jie Yin, Zhuo Zhang, Shu-Qi Jin, Pu He, Yu‐Tong Mu, Xiao-Ming Gong, Wen-Quan Tao (2022). Three-dimensional multi-field digital twin technology for proton exchange membrane fuel cells. Applied Energy.DOI
306. Yujie Chen, Kong Ling, Shu-Qi Jin, Wei Lu, Bo Yu, Dongliang Sun, Wei Zhang, Wen‐Quan Tao (2022). Numerical investigation of critical heat flux during subcooled flow boiling in a vertical rectangular Mini-channel. Applied Thermal Engineering.DOI
307. Chuangde Zhang, Ming-Jia Li, Zi Wang, Feifei Qin, Yi Yuan, Luguo Liu, Wen‐Quan Tao (2022). Lattice Boltzmann mesoscopic study of effects of corrosion on flow boiling heat transfer in microchannels. Applied Thermal Engineering.DOI
308. Zhuo Zhang, Qiyao Wang, Fan Bai, Li Chen, Wen‐Quan Tao (2022). Performance simulation and key parameters in-plane distribution analysis of a commercial-size PEMFC. Energy.DOI
309. Wen‐Zhen Fang, Fangqi Zhu, Faquan Shen, Delin Chai, Wen‐Quan Tao (2022). Freezing behaviors of impacting water droplets on cold inclined surfaces. Applied Thermal Engineering.DOI
310. Le Lei, Pu He, Peng He, Wen‐Quan Tao (2022). Numerical Research on the Cold Start-up Strategy of a PEMFC Stack from −30°C. Journal of Thermal Science.DOI
311. Chuangde Zhang, Ming-Jia Li, Feifei Qin, Luguo Liu, Wen‐Tao Ji, Wen‐Quan Tao (2022). Lattice Boltzmann study of bubble dynamic behaviors and heat transfer performance during flow boiling in a serpentine microchannel. Applied Thermal Engineering.DOI
312. Yi Yuan, Ming-Jia Li, Chuangde Zhang, Xiaoyu Li, Wen‐Quan Tao (2022). Numerical investigation of flow boiling heat transfer in manifold microchannels. Applied Thermal Engineering.DOI
313. Ji‐Wang Luo, Li Chen, ZiHan Wang, Wen‐Quan Tao (2022). Topology optimization of thermal cloak using the adjoint lattice Boltzmann method and the level-set method. Applied Thermal Engineering.DOI
314. Lingyi Guo, Li Chen, Ruiyuan Zhang, Ming Peng, Wen‐Quan Tao (2022). Pore-scale simulation of two-phase flow and oxygen reactive transport in gas diffusion layer of proton exchange membrane fuel cells: Effects of nonuniform wettability and porosity. Energy.DOI
315. Ning Sun, Qiu-Nan Yu, Wen‐Tao Ji, Ya‐Ling He, Wen‐Quan Tao (2022). NUMERIAL SIMULATION OF TURBINE BLADE INTERNAL AND EXTERNAL HEAT TRANSFER WITH THE MULTI-LAYER COUPLING METHOD. Proceedings.DOI
316. Ji‐Wang Luo, Li Chen, MengYi Wang, Xia Yang, Wen‐Quan Tao (2022). Particle-scale study of coupled physicochemical processes in Ca(OH)2 dehydration using the lattice Boltzmann method. Energy.DOI
317. Teng Ma, Ming-Jia Li, Jinliang Xu, Jing-Wei Ni, Wen‐Quan Tao, Li Wang (2022). Study of dynamic response characteristics of S-CO2 cycle in coal-fired power plants based on real-time micro-grid load and a novel synergistic control method with variable working conditions. Energy Conversion and Management.DOI
318. Mingjie Li, Wenjing Zhou, Jinjia Wei, Wen‐Quan Tao (2022). Numerical Investigation on Dropwise Condensation on Rough Structures with and without Non-Condensable Gas. Journal of Thermal Science.DOI
319. 陶文铨，何雅玲（2021）. 场协同原理:它的科学之美及与(火积)的关系. 《中国科学:技术科学》.
320. 余远明，王明，陈志锋，方文振，陶文铨（2021）. 应用数值模拟方法研究微观因子对聚氨酯硬泡导热系数的影响. 《家电科技》.DOI
321. 陈宇杰，宇波，陶文铨（2021）. 亲水/疏水复合凹槽壁面上气泡成核的分子动力学模拟研究. 《工程热物理学报》.
322. 丁昊，陶文铨（2021）. 水平热板上液态金属自然对流的数值模拟. 《工程热物理学报》.
323. 黄明华，刘广新，何雅玲，李安桂，陶文铨（2021）. 基于遗传算法的太阳能烟囱发电站结构优化. 《西安交通大学学报》.
324. Jingguo Qu, Dewei Zhang, Jianfei Zhang, Wen-Quan Tao (2021). LED chip cooling system using ionic wind induced by multi-wire corona discharge. Applied Thermal Engineering.DOI
325. Yu‐Tong Mu, Pu He, Zhaolin Gu, Zhiguo Qu, Wen‐Quan Tao (2021). Modelling the reactive transport processes in different reconstructed agglomerates of a PEFC catalyst layer. Electrochimica Acta.DOI
326. Wen‐Zhen Fang, Rui Qiao, Qinjun Kang, Wen‐Quan Tao (2021). Pore-scale simulation of reactive transport processes in lithium-oxygen batteries. International Communications in Heat and Mass Transfer.DOI
327. Li Chen, An He, Jianlin Zhao, Qinjun Kang, Zeng-Yao Li, Jan Carmeliet, Naoki Shikazono, Wen‐Quan Tao (2021). Pore-scale modeling of complex transport phenomena in porous media. Progress in Energy and Combustion Science.DOI
328. Fan Bai, Le Lei, Zhuo Zhang, Li Chen, Lei Chen, Wen‐Quan Tao (2021). Application of similarity theory in the study of proton exchange membrane fuel cells: a comprehensive review of recent developments and future research requirements. Energy Storage and Saving.DOI
329. Wen‐Quan Tao, Qiuwang Wang, Wenxiao Chu (2021). Inaugural editorial for Energy Storage and Saving. Energy Storage and Saving.DOI
330. Chuang-Yao Zhao, Di Qi, Qiong-Tao Li, Pu-Hang Jin, Wen‐Tao Ji, Wen‐Quan Tao (2021). Peripheral heat transfer prediction of the subcooled falling liquid film on a horizontal smooth tube. Physics of Fluids.DOI
331. Fan Bai, Le Lei, Zhuo Zhang, Hailong Li, Jinyue Yan, Li Chen, Yanjun Dai, Lei Chen, Wen‐Quan Tao (2021). Application of similarity theory in modeling the output characteristics of proton exchange membrane fuel cell. International Journal of Hydrogen Energy.DOI
332. Lina Liu, Lingyi Guo, Ruiyuan Zhang, Li Chen, Wen‐Quan Tao (2021). Numerically investigating two-phase reactive transport in multiple gas channels of proton exchange membrane fuel cells. Applied Energy.DOI
333. Xun Liu, Li Chen, Ming Peng, Wen‐Tao Ji, Wen‐Quan Tao (2021). Topology optimization of the manifold microchannels with triple-objective functions. Numerical Heat Transfer Part B Fundamentals.DOI
334. Xiaofei Zhu, Sen Wang, Qihong Feng, Lei Zhang, Ming-Jia Li, Wen‐Quan Tao (2021). Pore-scale numerical prediction of three-phase relative permeability in porous media using the lattice Boltzmann method. International Communications in Heat and Mass Transfer.DOI
335. Wen‐Tao Ji, Xiaodong Lu, Dayong Cheng, Ning Sun, Ming-Jia Li, Wen‐Quan Tao (2021). Effect of wettability on nucleate pool boiling heat transfer of a low surface tension fluid outside horizontal finned tubes. International Communications in Heat and Mass Transfer.DOI
336. Yu‐Tong Mu, Shu-Ran Yang, Pu He, Wen‐Quan Tao (2021). Mesoscopic modeling impacts of liquid water saturation, and platinum distribution on gas transport resistances in a PEMFC catalyst layer. Electrochimica Acta.DOI
337. Fan Bai, Hao Shu Ding, Yu‐Tong Mu, Yan‐Jun Dai, Yinping Zhang, Wen‐Quan Tao (2021). Three‐dimensional non‐isothermal numerical model for predicting semi‐volatile organic compound transport process in a room. Indoor Air.DOI
338. Ruiyuan Zhang, Pu He, Fan Bai, Li Chen, Wen‐Quan Tao (2021). Multiscale modeling of proton exchange membrane fuel cells by coupling pore-scale models of the catalyst layers and cell-scale models. International Journal of Green Energy.DOI
339. Pu-Hang Jin, Ibrahim Mostafa, Peng He, Zhuo Zhang, Chuang-Yao Zhao, Wen‐Tao Ji, Wen‐Quan Tao (2021). Liquid film boiling on plain and structured tubular surfaces with and without hydrophobic coating. International Communications in Heat and Mass Transfer.DOI
340. Xing-Jie Ren, Hao Ding, Yanjun Dai, Jian-Yong Tu, Xu Chen, Jiangyi He, Wen‐Quan Tao (2021). Experimental study on thermal contact resistance of carbon fiber reinforced silicon carbide composite with 3D needled preform (3DN C/SiC). International Communications in Heat and Mass Transfer.DOI
341. Ruiyuan Zhang, Ting Min, Yan Liu, Li Chen, Wen‐Quan Tao (2021). Pore-scale study of effects of different Pt loading reduction schemes on reactive transport processes in catalyst layers of proton exchange membrane fuel cells. International Journal of Hydrogen Energy.DOI
342. Yujie Chen, Xue‐Jiao Chen, Bo Yu, Wenjing Zhou, Qun Cao, Wen‐Quan Tao (2021). Investigation of water bubble nucleation by using molecular dynamics simulation. Journal of Molecular Liquids.DOI
343. Li Chen, Qinjun Kang, Wen‐Quan Tao (2021). Pore-scale numerical study of multiphase reactive transport processes in cathode catalyst layers of proton exchange membrane fuel cells. International Journal of Hydrogen Energy.DOI
344. Ming-Hua Huang, Yu Hong Huang, Junji Cao, Wen‐Quan Tao (2021). Study on mitigation of automobile exhaust pollution in an urban street canyon: Emission reduction and air cleaning street lamps. Building and Environment.DOI
345. Shuai Zhang, Kong Ling, Na Sun, Siyuan Yang, Xiangmiao Hao, Xiaowei Sui, Wen‐Quan Tao (2021). 2-D numerical study of ferrofluid droplet formation from microfluidic T-junction using VOSET method. Numerical Heat Transfer Part A Applications.DOI
346. Kong Ling, Shuai Zhang, Wenxing Liu, Xiaowei Sui, Wen‐Quan Tao (2021). Interface Tracking Simulation for Subcooled Flow Boiling Using VOSET Method. Frontiers in Energy Research.DOI
347. Jian Li, Jakub Jurasz, Hailong Li, Wen‐Quan Tao, Yuanyuan Duan, Jinyue Yan (2021). Corrigendum to “A new indicator for a fair comparison on the energy performance of data centers” [Appl. Energy 276 (2020) 115497]. Applied Energy.DOI
348. Ji‐Wang Luo, Li Chen, Qinjun Kang, Wen‐Quan Tao (2021). TOPOLOGY OPTIMIZATION FOR THERMAL FLOW BASED ON ADJOINT LATTICE BOLTZMANN METHOD AND LEVEL SET METHOD. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
349. Peng-Yi Cui, Weiqiu Chen, Jiaqi Wang, Jinhao Zhang, Yuandong Huang, Wen-Quan Tao (2021). Numerical studies on issues of Re-independence for indoor airflow and pollutant dispersion within an isolated building. Building Simulation.DOI
350. Dong Huang, Ming-Jia Li, Ruilong Wang, Yiwen Yang, Wen-Quan Tao (2021). Advanced carbon sequestration by the hybrid system of photobioreactor and microbial fuel cell with novel photocatalytic porous framework. Bioresource Technology.DOI
351. Chuang-Yao Zhao, Di Qi, Wen‐Tao Ji, Pu-Hang Jin, Wen‐Quan Tao (2021). A comprehensive review on computational studies of falling film hydrodynamics and heat transfer on the horizontal tube and tube bundle. Applied Thermal Engineering.DOI
352. Le Lei, Pu He, Peng He, Wen‐Quan Tao (2021). A comparative study: The effect of current loading modes on the cold start-up process of PEMFC stack. Energy Conversion and Management.DOI
353. Yujie Chen, Kong Ling, Hao Shu Ding, Yun Wang, Shu-Qi Jin, Wen‐Quan Tao (2021). 3-D numerical study of subcooled flow boiling in a horizontal rectangular mini-channel by VOSET. International Journal of Heat and Mass Transfer.DOI
354. Chuang-Yao Zhao, Zhuo-Liang Yao, Di Qi, Wen‐Tao Ji, Angui Li, Wen‐Quan Tao (2021). Numerical investigation of tube bundle arrangement effect on falling film fluid flow and heat transfer. Applied Thermal Engineering.DOI
355. Chuangde Zhang, Li Chen, Wen‐Tao Ji, Yu Liu, Luguo Liu, Wen‐Quan Tao (2021). Lattice Boltzmann mesoscopic modeling of flow boiling heat transfer processes in a microchannel. Applied Thermal Engineering.DOI
356. Yiwen Yang, Ming-Jia Li, Wen‐Quan Tao, Dong Huang (2021). Study of carbon dioxide sequestration and electricity generation by a new hybrid bioenergy system with the novelty catalyst. Applied Thermal Engineering.DOI
357. Yanjun Dai, Jie Zhao, Ji-Wei Shi, Wei Wang, Wen‐Quan Tao (2021). A Multi-Scale Thermal Analysis Method for Data Centers with Application in a Ship Data Center. Journal of Thermal Science.DOI
358. Guo-Hun Chong, Xiaodong Lu, Wen‐Tao Ji, Li Chen, Chuang-Yao Zhao, Wen‐Quan Tao (2021). Deposition of nano-scale polymer film on micro-fins to enhance the film-wise condensation of very low surface tension substances. International Journal of Heat and Mass Transfer.DOI
359. Fan Yuan, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2021). A novel model for predicting the effective specific heat capacity of molten salt doped with nanomaterial for solar energy application. Applied Thermal Engineering.DOI
360. R.P. Fu, Z.G. Qu, Wen‐Quan Tao, X.B. Zhu, J.R. Liu (2021). Experimental and numerical study on performance of hybrid refrigeration system that combines vapor compression and thermoelectric systems. Applied Thermal Engineering.DOI
361. Wen‐Quan Tao (2021). My 50-year life in studying heat transfer. Applied Thermal Engineering.DOI
362. Ming-Hua Huang, Ya‐Ling He, Zhenping Feng, Junji Cao, Wen‐Quan Tao (2021). Numerical study of SALSCS demonstration unit in Xi 'an, China, with non-uniform solar irradiation. International Journal of Heat and Mass Transfer.DOI
363. Yanjun Dai, Xing-Jie Ren, Yungang Wang, Qi Xiao, Wen‐Quan Tao (2021). Effect of thermal expansion on thermal contact resistance prediction based on the dual-iterative thermal–mechanical coupling method. International Journal of Heat and Mass Transfer.DOI
364. Wang Gao, J.F. Zhang, Zhiguo Qu, Wen‐Quan Tao (2021). Numerical investigations of heat transfer in hybrid microchannel heat sink with multi-jet impinging and trapezoidal fins. International Journal of Thermal Sciences.DOI
365. 陶文铨（2020）. 传热学教材60年的主要变迁及《传热学》(第5版)简介——纪念杨世铭、陈大燮编《传热学》出版60周年. 《中国大学教学》, No. 1.下载原文
366. 赵创要，樊菊芳，李安桂，冀文涛，靳蒲航，陶文铨（2020）. 饱和温度及热流密度对水平管外降膜蒸发传热影响的实验研究. 《暖通空调》.
367. 刘丽娜，张瑞元，郭凌燚，陈黎，陶文铨（2020）. 质子交换膜燃料电池气水两相流动对三流道分配特性影响. 《第十一届全国流体力学学术会议论文摘要集》.DOI
368. Wei You, Zeng-Yao Li, Wen‐Quan Tao (2020). A general self-adaptive under-relaxation strategy for fast and robust convergence of iterative calculation of incompressible flow. Numerical Heat Transfer Part B Fundamentals.DOI
369. Yinan Nie, Lei Chen, Wen‐Quan Tao (2020). THERMAL CONDUCTIVITY OF NAFION MOLECULAR CHAIN BASED ON FIRST-PRINCIPLE CALCULATION. Heat Transfer Research.DOI
370. Shaolong Guo, Wen-Quan Tao (2020). A robustness-enhanced method for Riemann solver. International Journal of Heat and Mass Transfer.DOI
371. Jingguo Qu, Jianfei Zhang, Mingjie Li, Wen-Quan Tao (2020). Heat dissipation of electronic components by ionic wind from multi-needle electrodes discharge: Experimental and multi-physical analysis. International Journal of Heat and Mass Transfer.DOI
372. Ming Peng, Ming-Jia Li, Wen‐Tao Ji, Wen-Quan Tao (2020). Numerical study on flow and heat transfer in a multi-jet microchannel heat sink. International Journal of Heat and Mass Transfer.DOI
373. Pu-Hang Jin, Zhuo Zhang, Ibrahim Mostafa, Chuang-Yao Zhao, Wen‐Tao Ji, Wen-Quan Tao (2020). Experimental study of falling film evaporation in tube bundles of doubly-enhanced, horizontal tubes. Applied Thermal Engineering.DOI
374. XU Hai-xia, Yu‐Tong Mu, Yinping Zhang, Wen‐Quan Tao (2020). Numerical evaluation of contaminants mixing uniformity in a full-scale test chamber with mixing fan. Indoor and Built Environment.DOI
375. Mengyi Wang, Li Chen, Yuhao Zhou, Wen‐Quan Tao (2020). Numerical Simulation of the Physical–Chemical–Thermal Processes During Hydration Reaction of the Calcium Oxide/Calcium Hydroxide System in an Indirect Reactor. Transport in Porous Media.DOI
376. Mingjie Li, Jinjia Wei, Wen‐Quan Tao (2020). Numerical simulation of dropwise condensation on rough structures in the presence of non-condensable gas using LBM. Numerical Heat Transfer Part A Applications.DOI
377. Wen‐Zhen Fang, Jin Li, Wen‐Quan Tao (2020). Two-dimensional pore-scale investigation of liquid water evolution in the cathode of proton exchange membrane fuel cells. Numerical Heat Transfer Part A Applications.DOI
378. Yujie Chen, Xue‐Jiao Chen, Bo Yu, Yu Zou, Wen‐Quan Tao (2020). Molecular Dynamics Study of Bubble Nucleation on an Ideally Smooth Substrate. Langmuir.DOI
379. Wen‐Zhen Fang, Fangqi Zhu, Wen‐Quan Tao, Chun Yang (2020). How different freezing morphologies of impacting droplets form. Journal of Colloid and Interface Science.DOI
380. Lei Chen, Xing Xiang, Wen‐Quan Tao (2020). Study on thermal conductivity of proton exchange membrane containing platinum particle. Renewable and Sustainable Energy Reviews.DOI
381. Zi-Ai Li, Yu‐Tong Mu, Zhaolin Gu, Wen‐Quan Tao (2020). A multiscale method for predicting the long-term emission behaviors of semivolatile organic compounds. Building and Environment.DOI
382. Zhuo Zhang, Pu He, Yanjun Dai, Pu-Hang Jin, Wen‐Quan Tao (2020). Study of the mechanical behavior of paper-type GDL in PEMFC based on microstructure morphology. International Journal of Hydrogen Energy.DOI
383. Yinan Nie, Lei Chen, Wen‐Quan Tao (2020). Comparative study on the resistance of different catalysts to electrochemical damage of fuel cells. International Journal of Hydrogen Energy.DOI
384. Pu He, Yu‐Tong Mu, Jae Wan Park, Wen‐Quan Tao (2020). Modeling of the effects of cathode catalyst layer design parameters on performance of polymer electrolyte membrane fuel cell. Applied Energy.DOI
385. Zheng-Ji Chen, Zeng-Yao Li, Wen‐Quan Tao (2020). A two-level variational multiscale meshless local Petrov-Galerkin (VMS-MLPG) method for incompressible Navier-Stokes equations. Numerical Heat Transfer Part B Fundamentals.DOI
386. Jian Li, Jakub Jurasz, Hailong Li, Wen‐Quan Tao, Yuanyuan Duan, Jinyue Yan (2020). A new indicator for a fair comparison on the energy performance of data centers. Applied Energy.DOI
387. Lei Chen, Yifan Wang, Wen‐Quan Tao (2020). Experimental study on the effect of temperature and water content on the thermal conductivity of gas diffusion layers in proton exchange membrane fuel cell. Thermal Science and Engineering Progress.DOI
388. Yunfeng Mao, Zhuo Li, Ya‐Ling He, Wen‐Quan Tao (2020). Numerical investigation of dust sedimentation effects on wall adsorption of indoor SVOC by the immersed boundary-lattice Boltzmann method. Building and Environment.DOI
389. Wen‐Zhen Fang, Yuqing Tang, Chun Yang, Wen‐Quan Tao (2020). Pore scale investigations on melting of phase change materials considering the interfacial thermal resistance. International Communications in Heat and Mass Transfer.DOI
390. Ming-Hua Huang, Lei Chen, Le Lei, Peng He, Junji Cao, Ya‐Ling He, Zhenping Feng, Wen‐Quan Tao (2020). Experimental and numerical studies for applying hybrid solar chimney and photovoltaic system to the solar-assisted air cleaning system. Applied Energy.DOI
391. Yujie Chen, Qun Cao, Jingfa Li, Bo Yu, Wen‐Quan Tao (2020). Effects of simulation system on the phase transition behavior of liquid film: A molecular dynamics study. Journal of Molecular Liquids.DOI
392. Li Chen, Xun Liu, Wen‐Quan Tao (2020). EFFECTS OF PHYSICOCHEMICAL PARAMETERS ON THE OPTIMIZED TOPOLOGY OF CATALYST IN MICRO REACTORS. Frontiers in Heat and Mass Transfer.DOI
393. Yujie Chen, Bing-Nan Chen, Bo Yu, Wen‐Quan Tao, Yu Zou (2020). Molecular Dynamics Study of Bubble Nucleation on a Substrate with Nonuniform Wettability. Langmuir.DOI
394. Yu‐Tong Mu, Zi-Ai Li, Zhaolin Gu, Wen‐Quan Tao (2020). Computational fluid dynamics prediction of formaldehyde emission and sorption processes in a small test chamber with mixing fan and vents. Atmospheric Environment.DOI
395. Yujie Chen, Bo Yu, Yu Zou, Bing-Nan Chen, Wen‐Quan Tao (2020). Study on the effect of foreign particle on bubble nucleation by using molecular dynamics simulation. Journal of Molecular Liquids.DOI
396. Wen‐Zhen Fang, Seokgyun Ham, Rui Qiao, Wen‐Quan Tao (2020). Magnetic Actuation of Surface Walkers: The Effects of Confinement and Inertia. Langmuir.DOI
397. Hui Wang, Ming-Jia Li, Zhiguo Qu, Ying Yin, Qinjun Kang, Bo Yu, Wen‐Quan Tao (2020). Modeling of multi-scale transport phenomena in shale gas production — A critical review. Applied Energy.DOI
398. Jing Ding, Wen‐Quan Tao, Shih‐Kang Fan (2020). Study of vibrational droplet triboelectric nanogenerator on structural and operational parameters. Nano Energy.DOI
399. Wen‐Tao Ji, Shi-Ming Xiong, Ming-Jia Li, Chuang-Yao Zhao, Wen-Quan Tao (2020). Effect of subsurface tunnel on the nucleate pool boiling heat transfer of R1234ze(E), R1233zd(E) and R134a. International Journal of Refrigeration.DOI
400. Wen‐Tao Ji, Xiao-Dong Lu, Li Chen, Yi-Wei Zhang, Wen-Quan Tao (2020). Experimental investigation on the ice melting heat transfer with a steam jet impingement method. International Communications in Heat and Mass Transfer.DOI
401. Chuang-Yao Zhao, Wen‐Tao Ji, Pu-Hang Jin, Angui Li, Ju-Fang Fan, Shun Yoshioka, Wen-Quan Tao (2020). Falling film evaporation in a triangular tube bundle under the influence of cross vapor stream. International Journal of Refrigeration.DOI
402. Paweł Ocłoń, Stanisław Łopata, Tomasz Stelmach, Mingjie Li, Jianfei Zhang, Hocine Mzad, Wen‐Quan Tao (2020). Design optimization of a high-temperature fin-and-tube heat exchanger manifold – A case study. Energy.DOI
403. Xing-Jie Ren, Yanjun Dai, Jian‐Jun Gou, Wen‐Quan Tao (2020). Numerical study on thermal contact resistance of 8-harness satin woven pierced composite. International Journal of Thermal Sciences.DOI
404. Mingjie Li, Jingguo Qu, Paweł Ocłoń, Jinjia Wei, Wen‐Quan Tao (2020). 3D numerical simulation of condensation and condensate behaviors on textured structures using lattice Boltzmann method. International Journal of Heat and Mass Transfer.DOI
405. Zi-Xiang Tong, Ming-Jia Li, Dong Li, Zhaolin Gu, Wen‐Quan Tao (2020). Two-dimensional numerical model for predicting fouling shape growth based on immersed boundary method and lattice Boltzmann method. Applied Thermal Engineering.DOI
406. Lei Chen, Yinan Nie, Hang Yu, Wen‐Quan Tao (2020). Study on the mechanism of destruction triggering of membrane electrode assembly of hydrogen fuel cell. International Journal of Heat and Mass Transfer.DOI
407. Ibrahim Mostafa, Pu-Hang Jin, Zhuo Zhang, Wen‐Quan Tao (2020). Experimental study of the falling film evaporation coefficients of R290 in a horizontal enhanced tube array. International Journal of Heat and Mass Transfer.DOI
408. Yujie Chen, Bo Yu, Yu Zou, Bing-Nan Chen, Wen‐Quan Tao (2020). Molecular dynamics studies of bubble nucleation on a grooved substrate. International Journal of Heat and Mass Transfer.DOI
409. Xiaoyu Li, Yu‐Tong Mu, Zhaohui Li, Wen‐Quan Tao (2020). Numerical study on the heat transfer and pressure drop characteristics of fin-and-tube surface with four round-convex strips around each tube. International Journal of Heat and Mass Transfer.DOI
410. Mingjie Li, Jingguo Qu, Jianfei Zhang, Jinjia Wei, Wen‐Quan Tao (2020). Air side heat transfer enhancement using radiantly arranged winglets in fin-and-tube heat exchanger. International Journal of Thermal Sciences.DOI
411. Songzhen Tang, Ming-Jia Li, Feilong Wang, Ya‐Ling He, Wen‐Quan Tao (2020). Fouling potential prediction and multi-objective optimization of a flue gas heat exchanger using neural networks and genetic algorithms. International Journal of Heat and Mass Transfer.DOI
412. Pu He, Ming-Jia Li, Yu‐Tong Mu, Wen‐Quan Tao (2020). Lattice Boltzmann method simulation of ice melting process in the gas diffusion layer of fuel cell. International Journal of Heat and Mass Transfer.DOI
413. Hong-Yuan Shi, Ming-Jia Li, Wenqi Wang, Yu Qiu, Wen‐Quan Tao (2020). Heat transfer and friction of molten salt and supercritical CO2 flowing in an airfoil channel of a printed circuit heat exchanger. International Journal of Heat and Mass Transfer.DOI
414. Yu‐Tong Mu, Adam Z. Weber, Zhaolin Gu, Tobias Schuler, Wen‐Quan Tao (2020). Mesoscopic analyses of the impact of morphology and operating conditions on the transport resistances in a proton-exchange-membrane fuel-cell catalyst layer. Sustainable Energy & Fuels.DOI
415. 付雷，杨富鑫，唐桂华，陈磊，马挺，许清源，张丽娜，贺进，张力之，何雅玲，陶文铨，王秋旺（2019）. 具有人文数理信息基础、培养国际化一流热流人才——西安交通大学“新工科”人才培养模式实践与探索. 《高等工程教育研究》.
416. 李增耀，曾敏，王秋旺，陶文铨（2019）. 传热学MOOC的实践与思考. 《高等工程教育研究》.
417. 成岭，张婧，金璐，李克成，陶文铨（2019）. LiBr-H2O吸收式热泵的热力学分析. 《制冷学报》.
418. 杨富鑫，何坤，任秦龙，付雷，唐桂华，许清源，张丽娜，何雅玲，陶文铨，王秋旺（2019）. 培养具有国际视野的热流创新人才——西安交通大学“热流国际班”的探索与实践. 《高等工程教育研究》.
419. 唐于晴，丁靖，蔡赛杰，陶文铨（2019）. 薄膜热电偶的开发及其在燃料电池测试的应用. 《工程热物理学报》.
420. 何璞，母玉同，陈黎，陶文铨（2019）. 质子交换膜燃料电池多孔电极有效输运系数预测. 《工程热物理学报》.
421. Haiyi Wu, Wen‐Zhen Fang, Qinjun Kang, Wen‐Quan Tao, Rui Qiao (2019). Predicting Effective Diffusivity of Porous Media from Images by Deep Learning. Scientific Reports.DOI
422. Zexiao Wang, Jian Hui Guan, Lei Chen, Wen‐Quan Tao (2019). A study on thrombus influenced red blood cell flow in microvasculature using moving particle semi-implicit method. International Journal of Heat and Fluid Flow.DOI
423. Li Chen, Ruiyuan Zhang, Qinjun Kang, Wen‐Quan Tao (2019). Pore-scale study of pore-ionomer interfacial reactive transport processes in proton exchange membrane fuel cell catalyst layer. Chemical Engineering Journal.DOI
424. Wen‐Tao Ji, Shuai-Feng Mao, Guo-Hun Chong, Chuang-Yao Zhao, Hu Zhang, Wen‐Quan Tao (2019). Effect of Fin Structure on the Condensation of R-134a, R-1234ze(E), and R-1233zd(E) Outside the Titanium Tubes. ASME Journal of Heat and Mass Transfer.DOI
425. Yu‐Tong Mu, Adam Z. Weber, Zhaolin Gu, Wen‐Quan Tao (2019). Mesoscopic modeling of transport resistances in a polymer-electrolyte fuel-cell catalyst layer: Analysis of hydrogen limiting currents. Applied Energy.DOI
426. Lei Chen, Shanyou Wang, Xing Xiang, Wen‐Quan Tao (2019). Mechanism of surface nanostructure changing wettability: A molecular dynamics simulation. Computational Materials Science.DOI
427. Ruiyuan Zhang, Ting Min, Li Chen, Qinjun Kang, Ya‐Ling He, Wen‐Quan Tao (2019). Pore-scale and multiscale study of effects of Pt degradation on reactive transport processes in proton exchange membrane fuel cells. Applied Energy.DOI
428. Wen‐Zhen Fang, Yuqing Tang, Chunmei Ban, Qinjun Kang, Rui Qiao, Wen‐Quan Tao (2019). Atomic layer deposition in porous electrodes: A pore-scale modeling study. Chemical Engineering Journal.DOI
429. Kong Ling, Kaikai Guo, Shuai Zhang, Wen‐Quan Tao (2019). A numerical investigation on dynamics of ferrofluid droplet in nonuniform magnetic field. Numerical Heat Transfer Part A Applications.DOI
430. Jinping Wang, Jianfei Zhang, Zhiguo Qu, Wen‐Quan Tao (2019). An adaptive inner iterative pressure-based algorithm for steady and unsteady incompressible flows. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
431. Wenjing Zhou, Jinjia Wei, Wen‐Quan Tao (2019). A method for controlling absolute pressures at the entrance and exit of a nanochannel/nanotube. Microfluidics and Nanofluidics.DOI
432. Li Chen, Qinjun Kang, Wen‐Quan Tao (2019). Pore-scale study of reactive transport processes in catalyst layer agglomerates of proton exchange membrane fuel cells. Electrochimica Acta.DOI
433. Pu He, Li Chen, Yu‐Tong Mu, Wen‐Quan Tao (2019). Modeling of the effect of ionomer volume fraction on water management for proton exchange membrane fuel cell. Energy Procedia.DOI
434. Ting Min, Li Chen, Yimin Gao, Wen‐Quan Tao (2019). Pore-Scale Study of Gas Transport in Catalyst Layers of PEMFCs. Energy Procedia.DOI
435. Mengyi Wang, Chen Li, Pu He, Wen‐Quan Tao (2019). NUMERICAL STUDY OF CaO/Ca(OH)2 DEHYDRATION PROCESS WITH A POROUS CHANNEL. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
436. Ruiyuan Zhang, Chen Li, Wen‐Zhen Fang, Wen‐Quan Tao (2019). NUMERICAL PREDICTION OF EFFECTIVE THERMAL CONDUCTIVITY OF CATALYST LAYERS IN PROTON EXCHANGE MEMBRANE FUEL CELLS. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
437. Wen‐Tao Ji, Xiao-Dong Lu, Qiu-Nan Yu, Chuang-Yao Zhao, Hu Zhang, Wen-Quan Tao (2019). Film-wise condensation of R-134a, R-1234ze(E) and R-1233zd(E) outside the finned tubes with different fin thickness. International Journal of Heat and Mass Transfer.DOI
438. Shuai-Feng Mao, Wen‐Tao Ji, Guo-Hun Chong, Chuang-Yao Zhao, Hu Zhang, Wen-Quan Tao (2019). Numerical investigation on the nucleate pool boiling heat transfer of R134a outside the plain tube. Numerical Heat Transfer Part A Applications.DOI
439. Mazhar Hussain, Wen‐Quan Tao (2019). Thermal conductivity of composite building materials: A pore scale modeling approach. International Journal of Heat and Mass Transfer.DOI
440. Lei Chen, Xing Xiang, Shanyou Wang, Wen‐Quan Tao (2019). Effects of Pt particle on structure and protons transport of Nafion membrane. International Journal of Heat and Mass Transfer.DOI
441. Wen‐Zhen Fang, Yuqing Tang, Chun Yang, Wen‐Quan Tao (2019). Numerical simulations of the liquid-vapor phase change dynamic processes in a flat micro heat pipe. International Journal of Heat and Mass Transfer.DOI
442. Ji‐Wang Luo, Li Chen, Ting Min, Feng Shan, Qinjun Kang, Wen‐Quan Tao (2019). Macroscopic transport properties of Gyroid structures based on pore-scale studies: Permeability, diffusivity and thermal conductivity. International Journal of Heat and Mass Transfer.DOI
443. Ya‐Ling He, Songzhen Tang, Wen‐Quan Tao, Ming-Jia Li, Feilong Wang (2019). A general and rapid method for performance evaluation of enhanced heat transfer techniques. International Journal of Heat and Mass Transfer.DOI
444. Kong Ling, Shuai Zhang, Peng-Zhan Wu, Siyuan Yang, Wen‐Quan Tao (2019). A coupled volume-of-fluid and level-set method (VOSET) for capturing interface of two-phase flows in arbitrary polygon grid. International Journal of Heat and Mass Transfer.DOI
445. Yuqing Tang, Wen‐Zhen Fang, Hong Lin, Wen‐Quan Tao (2019). Thin film thermocouple fabrication and its application for real-time temperature measurement inside PEMFC. International Journal of Heat and Mass Transfer.DOI
446. Mengyi Wang, Li Chen, Pu He, Wen‐Quan Tao (2019). Numerical study and enhancement of Ca(OH)2/CaO dehydration process with porous channels embedded in reactors. Energy.DOI
447. Lei Chen, Shanyou Wang, Wen‐Quan Tao (2019). A study on thermodynamic and transport properties of carbon dioxide using molecular dynamics simulation. Energy.DOI
448. Wen‐Tao Ji, Ju-Fang Fan, Chuang-Yao Zhao, Wen‐Quan Tao (2019). A revised performance evaluation method for energy saving effectiveness of heat transfer enhancement techniques. International Journal of Heat and Mass Transfer.DOI
449. Mengjie Li, Mengjie Li, Ming-Jia Li, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2019). A novel semi-empirical model on predicting the thermal conductivity of diathermic oil-based nanofluid for solar thermal application. International Journal of Heat and Mass Transfer.DOI
450. Zi-Xiang Tong, Ya‐Ling He, Wen‐Quan Tao (2019). A review of current progress in multiscale simulations for fluid flow and heat transfer problems: The frameworks, coupling techniques and future perspectives. International Journal of Heat and Mass Transfer.DOI
451. Lei Chen, Dingbin Huang, Shanyou Wang, Yinan Nie, Ya‐Ling He, Wen‐Quan Tao (2019). A study on dynamic desorption process of methane in slits. Energy.DOI
452. Wenjing Zhou, Yang Li, Mingjie Li, Jinjia Wei, Wen‐Quan Tao (2019). Bubble nucleation over patterned surfaces with different wettabilities: Molecular dynamics investigation. International Journal of Heat and Mass Transfer.DOI
453. Wen‐Quan Tao, Ya‐Ling He, Lei Chen (2019). A comprehensive review and comparison on heatline concept and field synergy principle. International Journal of Heat and Mass Transfer.DOI
454. 陶文铨（2018）. 杨世铭传热学论文集. 《高等教育》.
455. 张艳秋，陶文铨，李卓（2018）. 基于细胞培养的新型微流体加热器的开发与应用. 《同济大学学报(自然科学版)》.
456. 宋晨希，宋留成，时希杰，李明佳，陶文铨（2018）. 工业行业能效评价方法的分析和比较. 《中国能源》.
457. 谷伟，张锦岚，彭亮，曹为午，邓海华，陶文铨（2018）. 不同尺寸、形状和组成的金纳米颗粒的光热特性:在癌症治疗中的应用（英文）. 《红外与激光工程》.
458. 庞昊强，张虎，李增耀，陶文铨（2018）. SiO2气凝胶复合材料隔热性能实验研究. 《工程热物理学报》.
459. 张虎，马奕新，王娴，冀文涛，李跃明，陶文铨（2018）. 添加物对氧化硅凝胶隔热性能影响的实验研究. 《工程热物理学报》.
460. Zheng-Ji Chen, Zeng-Yao Li, Wen‐Quan Tao (2018). A new stability parameter in streamline upwind meshless Petrov–Galerkin method for convection–diffusion problems at large Peclet number. Numerical Heat Transfer Part B Fundamentals.DOI
461. Yu‐Tong Mu, Zhaolin Gu, Pu He, Wen‐Quan Tao (2018). Lattice Boltzmann method for conjugated heat and mass transfer with general interfacial conditions. Physical review. E.DOI
462. Mazhar Hussain, Wen‐Quan Tao (2018). Numerical prediction of effective thermal conductivity of ceramic fiber board using lattice Boltzmann method. Numerical Heat Transfer Part A Applications.DOI
463. Jinping Wang, Jianfei Zhang, Zhiguo Qu, Wen‐Quan Tao (2018). Adaptive inner iteration processes in pressure-based method for viscous compressible flows. Numerical Heat Transfer Part B Fundamentals.DOI
464. Kong Ling, Wen‐Quan Tao (2018). A sharp-interface model coupling VOSET and IBM for simulations on melting and solidification. Computers & Fluids.DOI
465. Li Chen, Ruiyuan Zhang, Pu He, Qinjun Kang, Ya‐Ling He, Wen‐Quan Tao (2018). Nanoscale simulation of local gas transport in catalyst layers of proton exchange membrane fuel cells. Journal of Power Sources.DOI
466. Yanjun Dai, Jian‐Jun Gou, Xing-Jie Ren, Fan Bai, Wen‐Zhen Fang, Wen‐Quan Tao (2018). A test-validated prediction model of thermal contact resistance for Ti-6Al-4V alloy. Applied Energy.DOI
467. Li Chen, Ruiyuan Zhang, Ting Min, Qinjun Kang, Wen‐Quan Tao (2018). Pore-scale study of effects of macroscopic pores and their distributions on reactive transport in hierarchical porous media. Chemical Engineering Journal.DOI
468. Li Chen, Mengyi Wang, Qinjun Kang, Wen‐Quan Tao (2018). Pore scale study of multiphase multicomponent reactive transport during CO2 dissolution trapping. Advances in Water Resources.DOI
469. Jian‐Jun Gou, Chunlin Gong, Liangxian Gu, Shuguang Li, Wen‐Quan Tao (2018). The unit cell method in predictions of thermal expansion properties of textile reinforced composites. Composite Structures.DOI
470. Li Chen, Mengyi Wang, Qinjun Kang, Wen‐Quan Tao (2018). WITHDRAWN: Pore scale study of multiphase multicomponent reactive transport during CO2 dissolution trapping. Advances in Water Resources.DOI
471. Zeng-Yao Li, Zheng-Ji Chen, Xuehong Wu, Wen‐Quan Tao (2018). Coupled MLPG–FVM simulation of steady state heat conduction in irregular geometry. Engineering Analysis with Boundary Elements.DOI
472. Zheng-Ji Chen, Zeng-Yao Li, Xuehong Wu, Wen‐Quan Tao (2018). A meshless local Petrov–Galerkin approach for solving the convection-dominated problems based on the streamline upwind idea and the variational multiscale concept. Numerical Heat Transfer Part B Fundamentals.DOI
473. Le Lei, Kong Ling, Wen‐Quan Tao (2018). NUMERICAL SIMULATION OF BUBBLE GROWTH IN A RECTANGULAR MICROCHANNEL. International Heat Transfer Conference (IHTC).DOI
474. Shuang Wang, Jianfei Zhang, Lingjian Kong, Zhiguo Qu, Wen‐Quan Tao (2018). NUMERICAL INVESTIGATION ON COOLING OF A HEATED PLATE WITH HOT SPOTS USING ELECTROSTATIC AIR ACCELERATORS. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
475. Lei Chen, Kun Wang, Shanyou Wang, Yinan Nie, G.H. Tang, Wen‐Quan Tao (2018). A STUDY ON THERMAL CONDUCTIVITY AND FLOW OF COPPERARGON NANOFLUIDS IN MICROCHANNEL. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
476. Wen‐Quan Tao, Ya‐Ling He (2018). MULTISCALE SIMULATION FOR FLUID FLOW AND HEAT TRANSFER PROBLEMS: A BRIEF REVIEW AND FURTHER RESEARCH NEEDS. International Heat Transfer Conference (IHTC).DOI
477. Dong Li, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2018). A FRACTIONAL-STEP LATTICE BOLTZMANN MODEL FOR SOLIDLIQUID PHASE CHANGE. International Heat Transfer Conference (IHTC).DOI
478. Yu‐Tong Mu, Zhaolin Gu, Wen‐Quan Tao (2018). PERFORMANCE MODELING AND OPTIMIZATION OF A POLYMER ELECTROLYTE MEMBRANE FUEL CELL UNDER DEAD-ENDED ANODE CONDITIONS. International Heat Transfer Conference (IHTC).DOI
479. Shen Du, Ming-Jia Li, Zhan-Bin Liu, Ya‐Ling He, Wen‐Quan Tao (2018). PORE-SCALE NUMERICAL STUDY ON THE HEAT TRANSFER PROCESS IN POROUS MEDIA UNDER DIFFERENT THERMAL CONDITIONS. International Heat Transfer Conference (IHTC).DOI
480. Xing-Jie Ren, Yanjun Dai, Jian‐Jun Gou, Wen‐Quan Tao (2018). EXPERIMENTAL STUDY ON THERMAL CONTACT RESISTANCE OF NEEDLE-PUNCHED C/C-SIC COMPOSITES AT DIFFERENT TEMPERATURES AND PRESSURES. International Heat Transfer Conference (IHTC).DOI
481. Pu-Hang Jin, Zhuo Zhang, Ibrahim Mostafa, Chuang-Yao Zhao, Wen‐Tao Ji, Wen-Quan Tao (2018). Heat transfer correlations of refrigerant falling film evaporation on a single horizontal smooth tube. International Journal of Heat and Mass Transfer.DOI
482. Wen‐Tao Ji, Er-Tao Zhao, Chuang-Yao Zhao, Hu Zhang, Wen-Quan Tao (2018). Falling film evaporation and nucleate pool boiling heat transfer of R134a on the same enhanced tube. Applied Thermal Engineering.DOI
483. Shiyan Li, Wen‐Tao Ji, Chuang-Yao Zhao, Hu Zhang, Wen-Quan Tao (2018). Effects of magnetic field on the pool boiling heat transfer of water-based α-Fe2O3 and γ-Fe2O3 nanofluids. International Journal of Heat and Mass Transfer.DOI
484. Yongliang Feng, Shaolong Guo, Wen-Quan Tao, Pierre Sagaut (2018). Regularized thermal lattice Boltzmann method for natural convection with large temperature differences. International Journal of Heat and Mass Transfer.DOI
485. Pu-Hang Jin, Chuang-Yao Zhao, Wen‐Tao Ji, Wen-Quan Tao (2018). Experimental investigation of R410A and R32 falling film evaporation on horizontal enhanced tubes. Applied Thermal Engineering.DOI
486. Peng-Yi Cui, Yan Zhang, Jinhao Zhang, Yuandong Huang, Wen-Quan Tao (2018). Application and numerical error analysis of multiscale method for air flow, heat and pollutant transfer through different scale urban areas. Building and Environment.DOI
487. Wen‐Tao Ji, Zhao Peng-fei, Chuang-Yao Zhao, Jing Ding, Wen-Quan Tao (2018). Pool boiling heat transfer of water and nanofluid outside the surface with higher roughness and different wettability. Nanoscale and Microscale Thermophysical Engineering.DOI
488. Hu Zhang, Chao Zhang, Wen‐Tao Ji, Xian Wang, Yueming Li, Wen-Quan Tao (2018). Experimental Characterization of the Thermal Conductivity and Microstructure of Opacifier-Fiber-Aerogel Composite. Molecules.DOI
489. Wen‐Tao Ji, Guo-Hun Chong, Chuang-Yao Zhao, Hu Zhang, Wen-Quan Tao (2018). Condensation heat transfer of R134a, R1234ze(E) and R290 on horizontal plain and enhanced titanium tubes. International Journal of Refrigeration.DOI
490. Wen‐Tao Ji, Chuang-Yao Zhao, Jessica Lofton, Zeng-Yao Li, Ding-Cai Zhang, Ya‐Ling He, Wen-Quan Tao (2018). Condensation of R134a and R22 in Shell and Tube Condensers Mounted With High-Density Low-Fin Tubes. ASME Journal of Heat and Mass Transfer.DOI
491. Chuang-Yao Zhao, Wen‐Tao Ji, Pu-Hang Jin, Shun Yoshioka, Wen-Quan Tao (2018). Effect of downward vapor stream on falling film evaporation of R134a in a tube bundle. International Journal of Refrigeration.DOI
492. Shaolong Guo, Wen-Quan Tao (2018). A hybrid flux splitting method for compressible flow. Numerical Heat Transfer Part B Fundamentals.DOI
493. Qingfeng Cao, Minghua Huang, Thomas H. Kuehn, Lian Shen, Wen-Quan Tao, Junji Cao, David Y.H. Pui (2018). Urban-scale SALSCS, Part II: A Parametric Study of System Performance. Aerosol and Air Quality Research.DOI
494. Wen‐Tao Ji, Chuang-Yao Zhao, Er-Tao Zhao, Zeng-Yao Li, Wen-Quan Tao (2018). COMPARATIVE STUDY ON THE POOL BOILING AND FALLING FILM EVAPORATION OF REFRIGERANT R134A OUTSIDE THE SAME TUBES. International Heat Transfer Conference (IHTC).DOI
495. Yi Mao, Zhuo Li, Ya‐Ling He, Wen-Quan Tao (2018). LATTICE BOLTZMANN METHOD FOR UNDERSTANDING THE MASS TRANSFER MECHANISMS OF TWO-PHASE ORGANIC INDOOR-AIR POLLUTANTS. International Heat Transfer Conference (IHTC).DOI
496. Xing-Jie Ren, Yanjun Dai, Jian‐Jun Gou, Wen‐Quan Tao (2018). Numerical prediction of thermal contact resistance of 3D C/C-SiC needled composites based on measured practical topography. International Journal of Heat and Mass Transfer.DOI
497. Mingjie Li, Christian Huber, Wen‐Quan Tao, Jinjia Wei (2018). Study on nucleation position and wetting state for dropwise condensation on rough structures with different wettability using multiphase lattice Boltzmann method. International Journal of Heat and Mass Transfer.DOI
498. Ya‐Ling He, Qing Liu, Qing Li, Wen‐Quan Tao (2018). Lattice Boltzmann methods for single-phase and solid-liquid phase-change heat transfer in porous media: A review. International Journal of Heat and Mass Transfer.DOI
499. Mingjie Li, Wenjing Zhou, Jinjia Wei, Wen‐Quan Tao (2018). 3D numerical simulation of heat and mass transfer of fin-and-tube heat exchanger under dehumidifying conditions. International Journal of Heat and Mass Transfer.DOI
500. Xiaojuan Wang, Ya‐Ling He, Zhongdong Wang, Wen‐Quan Tao (2018). Microscopic expression of entransy in ideal gas system for diatomic molecules. International Journal of Heat and Mass Transfer.DOI
501. Wen‐Zhen Fang, Yuqing Tang, Ming-Jia Li, Qinjun Kang, Wen‐Quan Tao (2018). Influences of the perforation on effective transport properties of gas diffusion layers. International Journal of Heat and Mass Transfer.DOI
502. Jian‐Jun Gou, Chunlin Gong, Wen‐Quan Tao (2018). Appropriate utilization of the unit cell method in thermal calculation of composites. Applied Thermal Engineering.DOI
503. Wen‐Zhen Fang, Jian‐Jun Gou, Li Chen, Wen‐Quan Tao (2018). A multi-block lattice Boltzmann method for the thermal contact resistance at the interface of two solids. Applied Thermal Engineering.DOI
504. Mingxuan Li, Hu Zhang, J. Zhang, Yingjie Mu, Enbao Tian, Dechun Dan, X.D. Zhang, Wen‐Quan Tao (2018). Experimental and numerical study and comparison of performance for wavy fin and a plain fin with radiantly arranged winglets around each tube in fin-and-tube heat exchangers. Applied Thermal Engineering.DOI
505. 和鹏，粘权鑫，方文振，陶文铨（2017）. 冰箱冷量损失的实验测定与保温性能的改进. 《制冷学报》.
506. Wen‐Zhen Fang, Yuqing Tang, Hu Zhang, Wen‐Quan Tao (2017). Numerical predictions of the effective thermal conductivity of the rigid polyurethane foam. Journal of Wuhan University of Technology-Mater Sci Ed.DOI
507. 黄明华，陈磊，陶文铨（2017）. 太阳能热气流烟囱的实验和数值模拟. 《工程热物理学报》.
508. 方文振，任兴杰，陶文铨（2017）. 基于多块格子Boltzmann方法模拟接触热阻. 《工程热物理学报》.
509. Wenjing Zhou, Zhi-Qiang Yu, Zhongzhen Li, Jinjia Wei, Wen‐Quan Tao (2017). Atomistic-continuum hybrid simulations for compressible gas flow in a parallel nanochannel. International Journal of Heat and Mass Transfer.DOI
510. Hu Zhang, Yueming Li, Wen‐Quan Tao (2017). Theoretical accuracy of anisotropic thermal conductivity determined by transient plane source method. International Journal of Heat and Mass Transfer.DOI
511. Wen‐Zhen Fang, Li Chen, Qinjun Kang, Wen‐Quan Tao (2017). Lattice Boltzmann modeling of pool boiling with large liquid-gas density ratio. International Journal of Thermal Sciences.DOI
512. Hu Zhang, Wen‐Zhen Fang, Yueming Li, Wen‐Quan Tao (2017). Experimental study of the thermal conductivity of polyurethane foams. Applied Thermal Engineering.DOI
513. Yunfeng Mao, Zhuo Li, Yu‐Tong Mu, Ya‐Ling He, Wen‐Quan Tao (2017). Numerical investigation of SVOC mass transport in a tube by an axisymmetric lattice Boltzmann method. Building and Environment.DOI
514. Jian‐Jun Gou, Xing-Jie Ren, Wen‐Zhen Fang, Shuguang Li, Wen‐Quan Tao (2017). Two small unit cell models for prediction of thermal properties of 8-harness satin woven pierced composites. Composites Part B Engineering.DOI
515. Kun Wang, Ya‐Ling He, Peiwen Li, Ming-Jia Li, Wen‐Quan Tao (2017). Multi-objective optimization of the solar absorptivity distribution inside a cavity solar receiver for solar power towers. Solar Energy.DOI
516. En Tian, Ya‐Ling He, Wen‐Quan Tao (2017). Thermo-Hydraulic Performance Evaluation, Field Synergy, and Entransy Dissipation Analysis for Hexagon-Like and Circular-Like Pin Finned Tube Bundles. Heat Transfer Engineering.DOI
517. Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao, Piotr Zelenay, Rangachary Mukundan, Qinjun Kang (2017). Pore-scale study of multiphase reactive transport in fibrous electrodes of vanadium redox flow batteries. Electrochimica Acta.DOI
518. Ming-Hua Huang, Lei Chen, Ya‐Ling He, Junji Cao, Wen‐Quan Tao (2017). A two-dimensional simulation method of the solar chimney power plant with a new radiation model for the collector. International Communications in Heat and Mass Transfer.DOI
519. Yu‐Tong Mu, Pu He, Jing Ding, Li Chen, Wen‐Quan Tao (2017). Numerical Study of the Gas Purging Process of a Proton Exchange Membrane Fuel Cell. Energy Procedia.DOI
520. Wei You, Zeng-Yao Li, Wen‐Quan Tao (2017). A physically consistent FVM interpolation scheme based on the discretized convection–diffusion equation. Numerical Heat Transfer Part B Fundamentals.DOI
521. Yunfeng Mao, Zhuo Li, Yinping Zhang, Ya‐Ling He, Wen‐Quan Tao (2017). A review of mass-transfer models and mechanistic studies of semi-volatile organic compounds in indoor environments. Indoor and Built Environment.DOI
522. Zhao-Hui Li, Lei Chen, Wen‐Quan Tao (2017). A parallel scalable multigrid method and HOC scheme for anisotropy elliptic problems. Numerical Heat Transfer Part B Fundamentals.DOI
523. Yu‐Tong Mu, Pu He, Jing Ding, Wen‐Quan Tao (2017). Modeling of the operation conditions on the gas purging performance of polymer electrolyte membrane fuel cells. International Journal of Hydrogen Energy.DOI
524. Lei Chen, Peng-Fei Chen, Zhongzhen Li, Ya‐Ling He, Wen‐Quan Tao (2017). The study on interface characteristics near the metal wall by a molecular dynamics method. Computers & Fluids.DOI
525. Huibao Luan, J. P. Kuang, Zhen Cao, Zan Wu, Wen‐Quan Tao, Bengt Ake Sunden (2017). CFD analysis of two types of welded plate heat exchangers. Numerical Heat Transfer Part A Applications.DOI
526. Chuanyong Zhu, Zeng-Yao Li, Wen‐Quan Tao (2017). Theoretical and DSMC Studies on Heat Conduction of Gas Confined in a Cuboid Nanopore. ASME Journal of Heat and Mass Transfer.DOI
527. Lei Chen, Dingbin Huang, Shanyou Wang, Ya‐Ling He, Wen‐Quan Tao (2017). Study on Methane Adsorption in Graphite Slit-pores by Molecular Dynamics Simulation. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
528. Pu-Hang Jin, Chuang-Yao Zhao, J.X. Liu, Wen‐Tao Ji, Wen‐Quan Tao (2017). FALLING FILM EVAPORATION OF R410A OUTSIDE HORIZONTAL SINGLE TUBES AND A TUBE BUNDLE. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
529. Le Lei, Kong Ling, Wen‐Quan Tao (2017). NUMERICAL SIMULATION OF NUCLEATE BOILING IN SHALLOW LIQUID BY VOSET. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
530. Wen‐Tao Ji, Ding-Cai Zhang, Chuang-Yao Zhao, Zeng-Yao Li, Ya‐Ling He, Wen‐Quan Tao (2017). Pool boiling heat transfer of R134a outside enhanced tubes at higher heat flux. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
531. Hu Zhang, Yueming Li, Wen‐Quan Tao (2017). ANALYSIS OF RADIATIVE HEAT TRANSFER ON MEASURING THERMAL CONDUCTIVITY OF SEMI-TRANSPARENT MATERIALS USING TRANSIENT PLANE SOURCE METHOD. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
532. Pu He, Li Chen, Yu‐Tong Mu, Wen‐Quan Tao (2017). PORE-SCALE SIMULATION OF ICE MELTING PROCESS IN POROUS MEDIA. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
533. Zi-Xiang Tong, Ming-Jia Li, Junjie Yan, Wen-Quan Tao (2017). Optimizing thermal conductivity distribution for heat conduction problems with different optimization objectives. International Journal of Heat and Mass Transfer.DOI
534. Chuang-Yao Zhao, Wen‐Tao Ji, Pu-Hang Jin, Yingjie Zhong, Wen-Quan Tao (2017). Experimental study of the local and average falling film evaporation coefficients in a horizontal enhanced tube bundle using R134a. Applied Thermal Engineering.DOI
535. Wen‐Tao Ji, Chuang-Yao Zhao, Ding-Cai Zhang, Zhao Peng-fei, Zeng-Yao Li, Ya‐Ling He, Wen-Quan Tao (2017). Pool boiling heat transfer of R134a outside reentrant cavity tubes at higher heat flux. Applied Thermal Engineering.DOI
536. Ming-Jia Li, Han-Hui Zhu, Jiaqi Guo, Kun Wang, Wen-Quan Tao (2017). The development technology and applications of supercritical CO2 power cycle in nuclear energy, solar energy and other energy industries. Applied Thermal Engineering.DOI
537. Chuang-Yao Zhao, Wen‐Tao Ji, Pu-Hang Jin, Yingjie Zhong, Wen-Quan Tao (2017). The influence of surface structure and thermal conductivity of the tube on the condensation heat transfer of R134a and R404A over single horizontal enhanced tubes. Applied Thermal Engineering.DOI
538. Shuang Wang, Jianfei Zhang, Lingjian Kong, Zhiguo Qu, Wen-Quan Tao (2017). An numerical investigation on the cooling capacity of needle-ring type electrostatic fluid accelerators for round plate with uniform and non-uniform heat flux. International Journal of Heat and Mass Transfer.DOI
539. Wen‐Tao Ji, Anthony M. Jacobi, Ya-Ling He, Wen-Quan Tao (2017). Summary and evaluation on the heat transfer enhancement techniques of gas laminar and turbulent pipe flow. International Journal of Heat and Mass Transfer.DOI
540. Shancong Mou, Yuxuan Luan, Wen‐Tao Ji, Jianfei Zhang, Wen-Quan Tao (2017). An example for the effect of round-off errors on numerical heat transfer. Numerical Heat Transfer Part B Fundamentals.DOI
541. Chuang-Yao Zhao, Wen‐Tao Ji, Pu-Hang Jin, Wen-Quan Tao (2017). Cross Vapor Stream Effect on Falling Film Evaporation in Horizontal Tube Bundle Using R134a. Heat Transfer Engineering.DOI
542. Shaolong Guo, Yongliang Feng, Wen-Quan Tao (2017). Deviation analysis of loosely coupled quasi-static method for fluid-thermal interaction in hypersonic flows. Computers & Fluids.DOI
543. Jin Yu, G.H. Tang, Ya‐Ling He, Wen-Quan Tao (2017). Numerical Study of the Solid Particle Erosion on H-Type Finned Circular/Elliptic Tube Surface. Communications in Computational Physics.DOI
544. Shuang Wang, Jianfei Zhang, Wen-Quan Tao (2017). NUMERICAL PARAMETRIC STUDY ON THE PERFORMANCE AND OPTIMAL CONFIGURATIONS OF IONIC WIND GENERATORS WITH NEEDLE-TO-RING ELECTRODE. Proceeding of Second Thermal and Fluids Engineering Conference.DOI
545. Chuang-Yao Zhao, Wen‐Tao Ji, Ya‐Ling He, Yingjie Zhong, Wen‐Quan Tao (2017). A comprehensive numerical study on the subcooled falling film heat transfer on a horizontal smooth tube. International Journal of Heat and Mass Transfer.DOI
546. Chuang-Yao Zhao, Wen‐Tao Ji, Pu-Hang Jin, Yingjie Zhong, Wen‐Quan Tao (2017). Hydrodynamic behaviors of the falling film flow on a horizontal tube and construction of new film thickness correlation. International Journal of Heat and Mass Transfer.DOI
547. Xiaoyu Li, Zhaohui Li, Wen‐Quan Tao (2017). Experimental study on heat transfer and pressure drop characteristics of fin-and-tube surface with four convex-strips around each tube. International Journal of Heat and Mass Transfer.DOI
548. Zhi-Qiang Yu, Peng Wang, Wenjing Zhou, Zeng-Yao Li, Wen‐Quan Tao (2017). Study on the consistency between field synergy principle and entransy dissipation extremum principle. International Journal of Heat and Mass Transfer.DOI
549. Dong Li, Zi-Xiang Tong, Qinlong Ren, Ya‐Ling He, Wen‐Quan Tao (2017). Three–dimensional lattice Boltzmann models for solid–liquid phase change. International Journal of Heat and Mass Transfer.DOI
550. Yanjun Dai, Yuqing Tang, Wen‐Zhen Fang, Hu Zhang, Wen‐Quan Tao (2017). A theoretical model for the effective thermal conductivity of silica aerogel composites. Applied Thermal Engineering.DOI
551. Hu Zhang, Wen‐Zhen Fang, Xian Wang, Yueming Li, Wen‐Quan Tao (2017). Thermal conductivity of fiber and opacifier loaded silica aerogel composite. International Journal of Heat and Mass Transfer.DOI
552. Jian‐Jun Gou, Chunlin Gong, Liangxian Gu, Shuguang Li, Wen‐Quan Tao (2017). Unit cells of composites with symmetric structures for the study of effective thermal properties. Applied Thermal Engineering.DOI
553. Ming-Jia Li, Songzhen Tang, Fei-Long Wang, Qinxin Zhao, Wen‐Quan Tao (2017). Gas-side fouling, erosion and corrosion of heat exchangers for middle/low temperature waste heat utilization: A review on simulation and experiment. Applied Thermal Engineering.DOI
554. Jianfei Zhang, Yogendra Kumar Joshi, Wen‐Quan Tao (2017). Single phase laminar flow and heat transfer characteristics of microgaps with longitudinal vortex generator array. International Journal of Heat and Mass Transfer.DOI
555. Mingjie Li, Christian Huber, Yu‐Tong Mu, Wen‐Quan Tao (2017). Lattice Boltzmann simulation of condensation in the presence of noncondensable gas. International Journal of Heat and Mass Transfer.DOI
556. 陈磊，黄鼎斌，李仲珍，何雅玲，陶文铨（2016）. 微狭缝中甲烷吸附特性的分子动力学模拟. 《热科学与技术》.
557. 陶文铨，徐晋（2016）. 过渡季节某大型阶梯教室内热环境的数值分析. 《天津大学学报(自然科学与工程技术版)》.
558. 史广泽，李临平，崔思宇，陶文铨，何雅玲（2016）. 空心屋面热工性能的三维数值研究. 《建筑科学》.
559. 曹涛锋，丁靖，母玉同，何雅玲，陶文铨（2016）. 质子交换膜燃料电池动态响应性能实验研究. 《工程热物理学报》.
560. 朱传勇，李增耀，赵新朋，陶文铨（2016）. 纳米尺度下气体导热的DSMC模拟. 《工程热物理学报》.
561. 粘权鑫，郭少龙，方文振，陶文铨（2016）. 液化天然气浸没燃烧式气化器数值模拟方法研究. 《西安交通大学学报》.
562. 冀文涛，张定才，赵创要，何雅玲，陶文铨（2016）. 高热通量水平管外池沸腾传热. 《化工学报》.
563. Ming-Jia Li, Wei Zhao, Xi Chen, Wen‐Quan Tao (2016). Economic analysis of a new class of vanadium redox-flow battery for medium- and large-scale energy storage in commercial applications with renewable energy. Applied Thermal Engineering.DOI
564. Hu Zhang, Yueming Li, Wen‐Quan Tao (2016). Effect of radiative heat transfer on determining thermal conductivity of semi-transparent materials using transient plane source method. Applied Thermal Engineering.DOI
565. Zi-Xiang Tong, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2016). Analysis and numerical tests of lifting relations to reconstruct LBM distribution functions for coupling simulations. International Journal of Heat and Mass Transfer.DOI
566. Huang Zhen, Zeng-Yao Li, Guang-Lei Yu, Wen‐Quan Tao (2016). Numerical investigations on fully-developed mixed turbulent convection in dimpled parabolic trough receiver tubes. Applied Thermal Engineering.DOI
567. Yu‐Tong Mu, Ming-Jia Li, Ya‐Ling He, Qinjun Kang, Wen‐Quan Tao (2016). Nucleate boiling performance evaluation of cavities at mesoscale level. International Journal of Heat and Mass Transfer.DOI
568. Zhen Tang, Xinpeng Zhao, Zeng-Yao Li, Wen‐Quan Tao (2016). Multi-scale numerical analysis of flow and heat transfer for a parabolic trough collector. International Journal of Heat and Mass Transfer.DOI
569. Yu Qiu, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2016). Thermal performance analysis of a parabolic trough solar collector using supercritical CO2 as heat transfer fluid under non-uniform solar flux. Applied Thermal Engineering.DOI
570. Jing Ding, Yu‐Tong Mu, Shuang Zhai, Wen‐Quan Tao (2016). Numerical study of gas purge in polymer electrolyte membrane fuel cell. International Journal of Heat and Mass Transfer.DOI
571. Zeng-Yao Li, Zhen Huang, Wen‐Quan Tao (2016). Three-dimensional numerical study on fully-developed mixed laminar convection in parabolic trough solar receiver tube. Energy.DOI
572. Yunfeng Mao, Zhuo Li, Ya‐Ling He, Wen‐Quan Tao (2016). CFD analysis of SVOC mass transfer in different chambers. International Journal of Heat and Mass Transfer.DOI
573. Zhongzhen Li, Ting Min, Qinjun Kang, Ya‐Ling He, Wen‐Quan Tao (2016). Investigation of methane adsorption and its effect on gas transport in shale matrix through microscale and mesoscale simulations. International Journal of Heat and Mass Transfer.DOI
574. He Liu, Zeng-Yao Li, Xinpeng Zhao, Wen‐Quan Tao (2016). Investigation of the effect of the gas permeation induced by pressure gradient on transient heat transfer in silica aerogel. International Journal of Heat and Mass Transfer.DOI
575. Kong Ling, Wen‐Quan Tao (2016). Numerical simulation of nucleate boiling in shallow liquid. Computers & Fluids.DOI
576. En Tian, Ya‐Ling He, Wen‐Quan Tao (2016). Research on a new type waste heat recovery gravity heat pipe exchanger. Applied Energy.DOI
577. Jian‐Jun Gou, Wen‐Zhen Fang, Yanjun Dai, Shuguang Li, Wen‐Quan Tao (2016). Multi-size unit cells to predict effective thermal conductivities of 3D four-directional braided composites. Composite Structures.DOI
578. Zhuangde Jiang, Zhiguo Qu, Liang Zhou, Wen‐Quan Tao (2016). A microscopic investigation of ion and electron transport in lithium-ion battery porous electrodes using the lattice Boltzmann method. Applied Energy.DOI
579. Yu‐Tong Mu, Li Chen, Qinjun Kang, Wen‐Quan Tao (2016). EVALUATION OF THE PERFORMANCE OF CAVITIES IN NUCLEATE BOILING AT MICROSCALE LEVEL. Heat Transfer Research.DOI
580. Zhongzhen Li, Lei Chen, Wen‐Quan Tao (2016). Molecular dynamics simulation of water permeation through the Nafion membrane. Numerical Heat Transfer Part A Applications.DOI
581. Wen‐Zhen Fang, Jian‐Jun Gou, Hu Zhang, Qinjun Kang, Wen‐Quan Tao (2016). Numerical predictions of the effective thermal conductivity for needled C/C-SiC composite materials. Numerical Heat Transfer Part A Applications.DOI
582. Zhiguo Qu, A. Li, Wen‐Quan Tao (2016). A numerical study of film condensation on a metallic foam-sintered plate with considering convection and super-cooling effects. International Communications in Heat and Mass Transfer.DOI
583. Jian‐Jun Gou, Xing-Jie Ren, Yanjun Dai, Shuguang Li, Wen‐Quan Tao (2016). Study of thermal contact resistance of rough surfaces based on the practical topography. Computers & Fluids.DOI
584. Guangnan Shi, L. P. Li, Chongfang Song, Shaozhen Cheng, Wen‐Quan Tao, Y.L. He (2016). 3D numerical thermal optimization of the roofs constructed with cast-in-situ hollow concrete floor system by finite volume method. Energy and Buildings.DOI
585. Jin Yu, Zhi-Qiang Yu, G.H. Tang, Ya‐Ling He, Wen‐Quan Tao (2016). Parametric study and multiple correlations of an H-type finned tube bank in a fully developed region. Numerical Heat Transfer Part A Applications.DOI
586. Jing Zhang, Hong-Hu Zhang, Ya‐Ling He, Wen‐Quan Tao (2016). A comprehensive review on advances and applications of industrial heat pumps based on the practices in China. Applied Energy.DOI
587. Wen-Li Xie, Zheng-Ji Chen, Zeng Li, Wen‐Quan Tao (2016). Grand Canonical Monte Carlo Simulation of Nitrogen Adsorption in a Silica Aerogel Model. Computation.DOI
588. Wen‐Zhen Fang, Hu Zhang, Li Chen, Wen-Quan Tao (2016). Numerical predictions of thermal conductivities for the silica aerogel and its composites. Applied Thermal Engineering.DOI
589. Peng-Yi Cui, Zhuo Li, Wen-Quan Tao (2016). Numerical investigations on Re-independence for the turbulent flow and pollutant dispersion under the urban boundary layer with some experimental validations. International Journal of Heat and Mass Transfer.DOI
590. Chuang-Yao Zhao, Wen‐Tao Ji, Pu-Hang Jin, Wen-Quan Tao (2016). Heat transfer correlation of the falling film evaporation on a single horizontal smooth tube. Applied Thermal Engineering.DOI
591. P. Yuan, G.B. Jiang, Y.L. He, Wen-Quan Tao (2016). Performance simulation of a two-phase flow distributor for plate-fin heat exchanger. Applied Thermal Engineering.DOI
592. Chuang-Yao Zhao, Pu-Hang Jin, Wen‐Tao Ji, Ya‐Ling He, Wen-Quan Tao (2016). Experimental investigations of R134a and R123 falling film evaporation on enhanced horizontal tubes. International Journal of Refrigeration.DOI
593. Yu‐Tong Mu, Ming-Jia Li, Ya‐Ling He, Wen-Quan Tao (2016). Pore-scale modelling of dynamic interaction between SVOCs and airborne particles with lattice Boltzmann method. Building and Environment.DOI
594. Peng-Yi Cui, Ming-Jia Li, Wen-Quan Tao (2016). Buoyancy flows and pollutant dispersion through different scale urban areas: CFD simulations and wind-tunnel measurements. Building and Environment.DOI
595. Yongliang Feng, Pierre Sagaut, Wen-Quan Tao (2016). A compressible lattice Boltzmann finite volume model for high subsonic and transonic flows on regular lattices. Computers & Fluids.DOI
596. Ming-Jia Li, Chenxi Song, Wen-Quan Tao (2016). A hybrid model for explaining the short-term dynamics of energy efficiency of China’s thermal power plants. Applied Energy.DOI
597. 孙龙清，李临平，宋翀芳，程锁明，陶文铨，何雅玲（2015）. 高度尺寸不同的空心砖复合传热性能的数值研究. 《建筑科学》.
598. 刘峪良，李临平，王飞，陶文铨，何雅玲（2015）. 砖孔内贴保温层对空心砖外墙保温性能的影响. 《河南科技大学学报(自然科学版)》.
599. 张凡，李兆辉，李晓宇，丁靖，陈磊，陶文铨（2015）. 不同材料翅片管换热器特性的试验研究. 《西安交通大学学报》.
600. 方文振，粘权鑫，张虎，陈黎，陶文铨（2015）. 气凝胶及其纤维复合材料等效导热系数预测. 《西安交通大学学报》.
601. 曹涛锋，母玉同，丁靖，何雅玲，陶文铨（2015）. 接触热阻对燃料电池温度分布影响的数值模拟. 《工程热物理学报》.
602. 赵矗，张剑飞，李洪岩，陶文铨（2015）. 离子风强化通道内平板对流传热的数值模拟. 《工程热物理学报》.
603. 栾辉宝，陶文铨，江永军，钱效南，庄壮，雍晓静，罗春桃（2015）. 全焊接板式换热器发展现状及展望. 《第五届全国换热器学术会议》.
604. 赵奕萌，付锐朋，张嘉杰，屈治国，陶文铨（2015）. 相变微胶囊单体熔化传热过程研究. 《工程热物理学报》.
605. 赵越，唐桂华，陶文铨（2015）. 碳黑掺杂SiO2气凝胶热辐射特性的蒙特卡罗计算. 《工程热物理学报》.
606. 赵创要，冀文涛，陶文铨（2015）. R134a在水平管外降膜蒸发的实验研究. 《工程热物理学报》.
607. Ting Min, Yimin Gao, Li Chen, Qinjun Kang, Wen‐Quan Tao (2015). Mesoscale investigation of reaction–diffusion and structure evolution during Fe–Al inhibition layer formation in hot-dip galvanizing. International Journal of Heat and Mass Transfer.DOI
608. Wen‐Zhen Fang, Li Chen, Jian‐Jun Gou, Wen‐Quan Tao (2015). Predictions of effective thermal conductivities for three-dimensional four-directional braided composites using the lattice Boltzmann method. International Journal of Heat and Mass Transfer.DOI
609. Jian‐Jun Gou, Yanjun Dai, Shuguang Li, Wen‐Quan Tao (2015). Numerical study of effective thermal conductivities of plain woven composites by unit cells of different sizes. International Journal of Heat and Mass Transfer.DOI
610. G.H. Tang, C. Bi, Yue Yu Zhao, Wen‐Quan Tao (2015). Thermal transport in nano-porous insulation of aerogel: Factors, models and outlook. Energy.DOI
611. Mazhar Hussain, En Tian, Tao-Feng Cao, Wen‐Quan Tao (2015). Pore-scale modeling of effective diffusion coefficient of building materials. International Journal of Heat and Mass Transfer.DOI
612. Kong Ling, Gihun Son, Dongliang Sun, Wen‐Quan Tao (2015). Three dimensional numerical simulation on bubble growth and merger in microchannel boiling flow. International Journal of Thermal Sciences.DOI
613. Li Chen, Qinjun Kang, Zhenxue Dai, Hari Viswanathan, Wen‐Quan Tao (2015). Permeability prediction of shale matrix reconstructed using the elementary building block model. Fuel.DOI
614. Huan Xi, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2015). A graphical criterion for working fluid selection and thermodynamic system comparison in waste heat recovery. Applied Thermal Engineering.DOI
615. Li Chen, Qinjun Kang, Rajesh J. Pawar, Ya‐Ling He, Wen‐Quan Tao (2015). Pore-scale prediction of transport properties in reconstructed nanostructures of organic matter in shales. Fuel.DOI
616. Tao-Feng Cao, Yu‐Tong Mu, Jing Ding, Hong Lin, Ya‐Ling He, Wen‐Quan Tao (2015). Modeling the temperature distribution and performance of a PEM fuel cell with thermal contact resistance. International Journal of Heat and Mass Transfer.DOI
617. Li Chen, Qinjun Kang, Qing Hua Tang, Bruce A. Robinson, Ya‐Ling He, Wen‐Quan Tao (2015). Pore-scale simulation of multicomponent multiphase reactive transport with dissolution and precipitation. International Journal of Heat and Mass Transfer.DOI
618. Zhan-Bin Liu, Ya‐Ling He, Zhiguo Qu, Wen‐Quan Tao (2015). Experimental study of heat transfer and pressure drop of supercritical CO2 cooled in metal foam tubes. International Journal of Heat and Mass Transfer.DOI
619. Yu‐Tong Mu, Li Chen, Ya‐Ling He, Wen‐Quan Tao (2015). Numerical study on temperature uniformity in a novel mini-channel heat sink with different flow field configurations. International Journal of Heat and Mass Transfer.DOI
620. Xin Li, Ya‐Ling He, Wen‐Quan Tao (2015). Analysis and extension of field synergy principle (FSP) for compressible boundary-layer heat transfer. International Journal of Heat and Mass Transfer.DOI
621. Chenxi Song, Ming-Jia Li, Fan Zhang, Ya‐Ling He, Wen‐Quan Tao (2015). A data envelopment analysis for energy efficiency of coal-fired power units in China. Energy Conversion and Management.DOI
622. Huang Zhen, Zeng-Yao Li, Wen‐Quan Tao (2015). Numerical study on combined natural and forced convection in the fully-developed turbulent region for a horizontal circular tube heated by non-uniform heat flux. Applied Energy.DOI
623. Hui Wang, Zhiguo Qu, Wen Zhang, Wen‐Quan Tao (2015). Effective Thermal Conductivity of MOF-5 Powder under a Hydrogen Atmosphere. Computation.DOI
624. Zeng-Yao Li, He Liu, Xinpeng Zhao, Wen‐Quan Tao (2015). A multi-level fractal model for the effective thermal conductivity of silica aerogel. Journal of Non-Crystalline Solids.DOI
625. Hu Zhang, Wen‐Zhen Fang, Zeng-Yao Li, Wen‐Quan Tao (2015). The influence of gaseous heat conduction to the effective thermal conductivity of nano-porous materials. International Communications in Heat and Mass Transfer.DOI
626. Liang Zhou, Zhiguo Qu, Liang Chen, Wen‐Quan Tao (2015). Lattice Boltzmann simulation of gas–solid adsorption processes at pore scale level. Journal of Computational Physics.DOI
627. Dong Li, Zi-Xiang Tong, Ya‐Ling He, Wen‐Quan Tao (2015). Predicting the transport process of indoor semi-volatile organic compounds via lattice Boltzmann method. Building and Environment.DOI
628. Kong Ling, Zhaohui Li, Dongliang Sun, Ya‐Ling He, Wen‐Quan Tao (2015). A three-dimensional volume of fluid & level set (VOSET) method for incompressible two-phase flow. Computers & Fluids.DOI
629. En Tian, Ya‐Ling He, Wen‐Quan Tao (2015). Numerical Simulation of Finned Tube Bank Across a Staggered Circular-Pin-Finned Tube Bundle. Numerical Heat Transfer Part A Applications.DOI
630. Yu‐Tong Mu, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2015). Coupling finite volume and lattice Boltzmann methods for pore scale investigation on volatile organic compounds emission process. Building and Environment.DOI
631. Zuohua Huang, Guangliang Yu, Z.Y. Li, Wen‐Quan Tao (2015). Numerical Study on Heat Transfer Enhancement in a Receiver Tube of Parabolic Trough Solar Collector with Dimples, Protrusions and Helical Fins. Energy Procedia.DOI
632. D. L. Tang, L. P. Li, Chongfang Song, Wen‐Quan Tao, Ya‐Ling He (2015). Numerical Thermal Analysis of Applying Insulation Material to Holes in Hollow Brick Walls by the Finite-Volume Method. Numerical Heat Transfer Part A Applications.DOI
633. Wenjing Zhou, Zhi-Qiang Yu, Zhongzhen Li, Ya‐Ling He, Wen‐Quan Tao (2015). Molecular Dynamics–Continuum Hybrid Simulation for the Impingement of Droplet on a Liquid Film. Numerical Heat Transfer Part A Applications.DOI
634. Ya‐Ling He, Wen‐Quan Tao (2015). Numerical Solutions of Nano/Microphenomena Coupled With Macroscopic Process of Heat Transfer and Fluid Flow: A Brief Review. ASME Journal of Heat and Mass Transfer.DOI
635. Zhan-Bin Liu, Ya‐Ling He, Yinshi Li, Zhiguo Qu, Wen‐Quan Tao (2015). Heat transfer characteristics of supercritical CO2 flow in metal foam tubes. The Journal of Supercritical Fluids.DOI
636. Ming-Jia Li, Wen‐Zhen Fang, Qinjun Kang, Jeffrey De'Haven Hyman, Hari Viswanathan, Wen‐Quan Tao (2015). Generalized lattice Boltzmann model for flow through tight porous media with Klinkenberg's effect. Physical Review E.DOI
637. Jian‐Jun Gou, Hu Zhang, Yanjun Dai, Shuguang Li, Wen‐Quan Tao (2015). Numerical prediction of effective thermal conductivities of 3D four-directional braided composites. Composite Structures.DOI
638. Li Chen, Lei Zhang, Qinjun Kang, Hari Viswanathan, Jun Ping Yao, Wen‐Quan Tao (2015). Nanoscale simulation of shale transport properties using the lattice Boltzmann method: permeability and diffusivity. Scientific Reports.DOI
639. Li Chen, Gang Wu, Edward F. Holby, Piotr Zelenay, Wen‐Quan Tao, Qinjun Kang (2015). Lattice Boltzmann Pore-Scale Investigation of Coupled Physical-electrochemical Processes in C/Pt and Non-Precious Metal Cathode Catalyst Layers in Proton Exchange Membrane Fuel Cells. Electrochimica Acta.DOI
640. Yong Wang, Dong-Ke Sun, Ya‐Ling He, Wen‐Quan Tao (2015). Lattice Boltzmann study on thermoacoustic onset in a Rijke tube. The European Physical Journal Plus.DOI
641. Ya‐Ling He, Wen‐Quan Tao (2015). Multiscale simulation of energy transfer in concentrating solar collectors of solar power system. International Symposium on Advances in Computational Heat Transfer (CHT).DOI
642. Mazhar Hussain, Ya‐Ling He, Wen‐Quan Tao (2015). NUMERICAL PREDICTIONS OF THE EFFECTIVE THERMAL CONDUCTIVITY FOR MULTIPHASE POROUS BUILDING MATERIALS. International Symposium on Advances in Computational Heat Transfer (CHT).DOI
643. Wen‐Tao Ji, Chuang-Yao Zhao, Ding-Cai Zhang, Shun Yoshioka, Ya‐Ling He, Wen-Quan Tao (2015). Effect of vapor flow on the falling film evaporation of R134a outside a horizontal tube bundle. International Journal of Heat and Mass Transfer.DOI
644. Wen‐Tao Ji, Chuang-Yao Zhao, Ya‐Ling He, Wen-Quan Tao (2015). Experimental validation of Cooper correlation at higher heat flux. International Journal of Heat and Mass Transfer.DOI
645. Wen‐Tao Ji, Anthony M. Jacobi, Ya-Ling He, Wen-Quan Tao (2015). Summary and evaluation on single-phase heat transfer enhancement techniques of liquid laminar and turbulent pipe flow. International Journal of Heat and Mass Transfer.DOI
646. Wen‐Tao Ji, Mitsuharu Numata, Ya‐Ling He, Wen-Quan Tao (2015). Nucleate pool boiling and filmwise condensation heat transfer of R134a on the same horizontal tubes. International Journal of Heat and Mass Transfer.DOI
647. Ming-Jia Li, Ya‐Ling He, Wen-Quan Tao (2015). Modeling a hybrid methodology for evaluating and forecasting regional energy efficiency in China. Applied Energy.DOI
648. Peng-Yi Cui, Ming-Jia Li, Wen-Quan Tao (2015). Wind-tunnel measurements for thermal effects on the air flow and pollutant dispersion through different scale urban areas. Building and Environment.DOI
649. Yongliang Feng, Pierre Sagaut, Wen-Quan Tao (2015). A three dimensional lattice model for thermal compressible flow on standard lattices. Journal of Computational Physics.DOI
650. 栾辉宝，陈斌，朱国庆，王崧，陶文铨（2014）. 板式蒸发器微纳米强化换热表面研究进展. 《石油化工设备》.
651. 阳祥，陶文铨（2014）. 非能动冷却系统上升通道中湍流自然对流的直接数值模拟. 《核科学与工程》.
652. 张定才，田松娜，冀文涛，赵安利，范晓伟，陶文铨（2014）. R417A在水平双侧强化管外沸腾换热研究. 《制冷学报》.
653. 蔡林，张虎，陶文铨，宁志芳，赵士虎，朱洪阳，李彩侠（2014）. 环境气氛对冰箱发泡料隔热性能影响研究. 《2014年中国家用电器技术大会》.
654. 姜国宝，凌空，陈黎，张剑飞，李增耀，陶文铨（2014）. 新型安注箱水动力特性的数值模拟. 《工程热物理学报》.
655. 阳祥，陶文铨（2014）. 高瑞利数下封闭腔内自然对流的数值模拟. 《西安交通大学学报》.
656. 栾辉宝，陈斌，郑伟业，夏晓宇，陶文铨（2014）. 可拆全焊接板式换热器的传热特性. 《化学工程》.
657. 丁靖，曹涛锋，林鸿，母玉同，陶文铨（2014）. 质子交换膜燃料电池性能优化实验研究. 《工程热物理学报》.
658. 蔡林，张虎，方文振，宁志芳，李林峰，赵士虎，朱洪阳，李彩侠，陶文铨（2014）. 聚氨酯隔热材料导热系数与温度定性关系研究. 《2014.10家电科技增刊——第十二届全国电冰箱（柜）、空调器及压缩机学术交流大会论文集》.
659. 张定才，杜佳迪，冀文涛，张振，朱春洁，何雅玲，陶文铨（2014）. R134a/R125混合工质水平管外凝结换热. 《化工学报》.
660. 黄圳，李增耀，陶文铨（2014）. 槽式集热管管内混合对流换热的数值模拟. 《工程热物理学报》.
661. 方文振，张虎，屈肖迪，何雅玲，陶文铨（2014）. 遮光剂对气凝胶复合材料隔热性能的影响. 《化工学报》.
662. 李兆辉，封永亮，陶文铨（2014）. 非均匀网格泊松方程高阶紧致离散及加速方法. 《工程热物理学报》.
663. 赵创要，冀文涛，陶文铨（2014）. R404A在低导热系数管外凝结传热的实验研究. 《工程热物理学报》.
664. 栾辉宝，陈斌，郑伟业，陶文铨（2014）. 板壳式换热器传热与流动特性研究. 《热能动力工程》.
665. 张嘉杰，熊玉平，屈治国，陶文铨（2014）. 周期射流冲击下导流板流动换热特性数值研究. 《工程热物理学报》.
666. 凌空，陶文铨（2014）. VOSET方法计算膜态沸腾的不同流态. 《工程热物理学报》.
667. 谷伟，唐桂华，陶文铨（2014）. 隔热板对近场辐射影响的研究. 《工程热物理学报》.
668. 母玉同，陈黎，曹涛锋，张虎，陶文铨（2014）. PEMFC阳极间歇排氢电化学反应过程的MRTBoltzmann研究. 《工程热物理学报》.
669. 阳祥，陶文铨（2014）. 离心浮升力对湍流混合对流换热影响的数值模拟. 《西安交通大学学报》.
670. Wei Gu, G.H. Tang, Wen‐Quan Tao (2014). Thermal switch and thermal rectification enabled by near-field radiative heat transfer between three slabs. International Journal of Heat and Mass Transfer.DOI
671. J.J. Zhang, Zhiguo Qu, R.P. Fu, Wen‐Quan Tao (2014). Part II: Numerical study on the flow and thermal characteristics of an integrated deflector under the periodic impingement of a supersonic high temperature jet. International Journal of Heat and Mass Transfer.DOI
672. Hu Zhang, Wei Gu, Mingxuan Li, Z.Y. Li, Z.J. Hu, Wen‐Quan Tao (2014). Experimental study on the kinetics of water vapor sorption on the inner surface of silica nano-porous materials. International Journal of Heat and Mass Transfer.DOI
673. Zhihao Xu, Zhiguo Qu, Chuang-Yao Zhao, Wen‐Quan Tao (2014). Experimental correlation for pool boiling heat transfer on metallic foam surface and bubble cluster growth behavior on grooved array foam surface. International Journal of Heat and Mass Transfer.DOI
674. Y.B. Tao, Y.L. He, Y.K. Liu, Wen‐Quan Tao (2014). Performance optimization of two-stage latent heat storage unit based on entransy theory. International Journal of Heat and Mass Transfer.DOI
675. Li Chen, Qinjun Kang, Yu‐Tong Mu, Ya‐Ling He, Wen‐Quan Tao (2014). A critical review of the pseudopotential multiphase lattice Boltzmann model: Methods and applications. International Journal of Heat and Mass Transfer.DOI
676. Ming-Jia Li, Qinjun Kang, Bill Carey, Wen‐Quan Tao (2014). Pore-scale study of diffusion–reaction processes involving dissolution and precipitation using the lattice Boltzmann method. International Journal of Heat and Mass Transfer.DOI
677. Ya‐Ling He, Wen‐Quan Tao (2014). Numerical studies on the inherent interrelationship between field synergy principle and entransy dissipation extreme principle for enhancing convective heat transfer. International Journal of Heat and Mass Transfer.DOI
678. Jianfei Zhang, Jinping Wang, Zhiguo Qu, Ya‐Ling He, Wen‐Quan Tao (2014). The study of different discretized schemes for density and convection terms in high speed compressible flow using the pressure-based method. Applied Thermal Engineering.DOI
679. H.H. Xia, G.H. Tang, Yao Shi, Wen‐Quan Tao (2014). Simulation of heat transfer enhancement by longitudinal vortex generators in dimple heat exchangers. Energy.DOI
680. Qing Liu, Ya‐Ling He, Qing Li, Wen‐Quan Tao (2014). A multiple-relaxation-time lattice Boltzmann model for convection heat transfer in porous media. International Journal of Heat and Mass Transfer.DOI
681. Dan Dan, Hu Zhang, Wen‐Quan Tao (2014). Effective structure of aerogels and decomposed contributions of its thermal conductivity. Applied Thermal Engineering.DOI
682. Huijin Xu, Zhiguo Qu, Wen‐Quan Tao (2014). Numerical investigation on self-coupling heat transfer in a counter-flow double-pipe heat exchanger filled with metallic foams. Applied Thermal Engineering.DOI
683. Hu Zhang, Ming-Jia Li, Wen‐Zhen Fang, Dan Dan, Zeng-Yao Li, Wen‐Quan Tao (2014). A numerical study on the theoretical accuracy of film thermal conductivity using transient plane source method. Applied Thermal Engineering.DOI
684. Hui Han, Ya‐Ling He, Wen‐Quan Tao, Yinshi Li (2014). A parameter study of tube bundle heat exchangers for fouling rate reduction. International Journal of Heat and Mass Transfer.DOI
685. Y.B. Tao, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2014). Effects of parameters on performance of high temperature molten salt latent heat storage unit. Applied Thermal Engineering.DOI
686. Yun‐Han Li, Zeng-Yao Li, Wen‐Quan Tao (2014). An ideal nano-porous insulation material: Design, modeling and numerical validation. Applied Thermal Engineering.DOI
687. Mazhar Hussain, Ya‐Ling He, Abdulmajeed A. Mohamad, Wen‐Quan Tao (2014). A New Hybrid Algorithm for Numerical Simulation of VOC Emissions Using Single-Layer and Multilayer Approaches. Numerical Heat Transfer Part B Fundamentals.DOI
688. JiaJie Zhang, Zhiguo Qu, Huijin Xu, Wen‐Quan Tao (2014). Semi-analytical solution for fully developed forced convection in metal-foam filled tube with uniform wall temperature. Science China Technological Sciences.DOI
689. Li Chen, Qinjun Kang, Hari Viswanathan, Wen‐Quan Tao (2014). Pore‐scale study of dissolution‐induced changes in hydrologic properties of rocks with binary minerals. Water Resources Research.DOI
690. Zhiguo Qu, W. Q. Li, J. J. Zhang, Wen‐Quan Tao (2014). Numerical Study of Heat Conduction with a Chemical Reaction at the Moving Frontal Surface for a Graphite Plate. Numerical Heat Transfer Part A Applications.DOI
691. Zhiguo Qu, Huaibin Gao, Xiangbo Feng, Wen‐Quan Tao (2014). Premixed Combustion in a Porous Burner with Different Fuels. Combustion Science and Technology.DOI
692. Jinping Wang, Jianfei Zhang, Zhiguo Qu, Ya‐Ling He, Wen‐Quan Tao (2014). Comparison of Robustness and Efficiency for SIMPLE and CLEAR Algorithms with 13 High-Resolution Convection Schemes in Compressible Flows. Numerical Heat Transfer Part B Fundamentals.DOI
693. Xiaohan Zhao, G.H. Tang, Xianglin Ma, Yanke Jin, Wen‐Quan Tao (2014). Numerical investigation of heat transfer and erosion characteristics for H-type finned oval tube with longitudinal vortex generators and dimples. Applied Energy.DOI
694. Li Chen, Qinjun Kang, Hailin Deng, James William Carey, Wen‐Quan Tao (2014). Mesoscopic study of the formation of pseudomorphs with presence of chemical fluids. Geosciences Journal.DOI
695. Yu Shi, G.H. Tang, Wen‐Quan Tao (2014). Lattice Boltzmann Study of Non-Newtonian Blood Flow in Mother and Daughter Aneurysm and a Novel Stent Treatment. Advances in Applied Mathematics and Mechanics.DOI
696. Kong Ling, Zeng-Yao Li, Wen‐Quan Tao (2014). A Direct Numerical Simulation for Nucleate Boiling by the VOSET Method. Numerical Heat Transfer Part A Applications.DOI
697. Wen‐Tao Ji, Zeng-Yao Li, Zhiguo Qu, Jian-Fei Guo, Ding-Cai Zhang, Ya‐Ling He, Wen-Quan Tao (2014). Film condensing heat transfer of R134a on single horizontal tube coated with open cell copper foam. Applied Thermal Engineering.DOI
698. Peng-Yi Cui, Zhuo Li, Wen-Quan Tao (2014). Investigation of Re -independence of turbulent flow and pollutant dispersion in urban street canyon using numerical wind tunnel (NWT) models. International Journal of Heat and Mass Transfer.DOI
699. Wen‐Tao Ji, Chuang-Yao Zhao, Ding-Cai Zhang, Zeng-Yao Li, Ya‐Ling He, Wen-Quan Tao (2014). Condensation of R134a outside single horizontal titanium, cupronickel (B10 and B30), stainless steel and copper tubes. International Journal of Heat and Mass Transfer.DOI
700. Chao Wei, Zhao-Jun Liu, Zeng-Yao Li, Zhiguo Qu, Ya‐Ling He, Wen‐Quan Tao (2014). Numerical Study on Some Improvements in the Passive Cooling System of a Radio Base Station Base on Multiscale Thermal Modeling Methodology—Part II—Results of Multiscale Numerical Simulation and Subsequent Improvements of Cooling Techniques. Numerical Heat Transfer Part A Applications.DOI
701. Chao Fu Wei, Zhao-Jun Liu, Zeng-Yao Li, Zhiguo Qu, Ya‐Ling He, Wen‐Quan Tao (2014). Numerical Study on Some Improvements in the Passive Cooling System of a Radio Base Station Base on Multiscale Thermal Modeling Methodology–Part I: Confirmation of Simplified Models. Numerical Heat Transfer Part A Applications.DOI
702. Zhiguo Qu, W.Q. Li, Wen‐Quan Tao (2014). Numerical model of the passive thermal management system for high-power lithium ion battery by using porous metal foam saturated with phase change material. International Journal of Hydrogen Energy.DOI
703. Chenxi Song, Ming-Jia Li, Fan Zhang, Ya‐Ling He, Wen‐Quan Tao (2014). Analysis of Energy Efficiency for Coal-fired Power Units Based on Data Envelopment Analysis Model. Energy Procedia.DOI
704. Kun Wang, Ya‐Ling He, Ze-Dong Cheng, Ming-Jia Li, Wen‐Quan Tao (2014). Numerical Simulation of Parabolic Trough Receiver Under Non-Uniform and Fluctuant Solar Flux Condition. International Heat Transfer Conference (IHTC).DOI
705. Ya‐Ling He, Wen‐Quan Tao (2014). CONVECTIVE HEAT TRANSFER ENHANCEMENT: MECHANISM, TECHNIQUES AND PERFORMANCE EVALUATION. Proceeding of Proceedings of CONV-14: International Symposium on Convective Heat and Mass Transfer. June 8 - 13, 2014, Kusadasi, Turkey.DOI
706. Fan Zhang, Chenxi Song, Ming-Jia Li, Ya‐Ling He, Wen‐Quan Tao (2014). Study on Energy Efficiency Evaluation Index System for Fossil-fuel Power Plant. Energy Procedia.DOI
707. Xinpeng Zhao, Zeng-Yao Li, He Liu, Wen‐Quan Tao (2014). The influences of microstructural parameters on the gaseous thermal conductivity in nanoporous material. AIP conference proceedings.DOI
708. Xinpeng Zhao, Zengyao Y. Li, Zhen Tang, Wen‐Quan Tao (2014). DSMC Study on the Rarefied Gaseous Heat Transfer in Annulus Heated by Nonuniform Heat Flux. International Heat Transfer Conference (IHTC).DOI
709. Huibao Luan, Wen‐Quan Tao, Guoqing Zhu, Bin Chen, Song Wang (2014). Numerical Simulation of Complicated Chevron Plates Passage. International Heat Transfer Conference (IHTC).DOI
710. Zi-Xiang Tong, Ya‐Ling He, Weiwei Yang, Wen‐Quan Tao (2014). A Coupling Scheme of Lattice Boltzmann Method and Finite Volume Method for Multi-Component Diffusion Processes. International Heat Transfer Conference (IHTC).DOI
711. Hui Wang, Zhiguo Qu, Wen Zhang, Wen‐Quan Tao (2014). Effects of the Induced Charge on CO2 Adsorption in Cu-BTC at Different Temperature: A Combined Experimental and Molecular Simulation Study. International Heat Transfer Conference (IHTC).DOI
712. Wei You, Zengyao Y. Li, Wen‐Quan Tao (2014). A Two-Dimensional Numerical Method for Incompressible Flow Problem Based on SIMPLER Algorithm and Quadtree Grid with Collocated Arrangement. International Heat Transfer Conference (IHTC).DOI
713. Wen‐Tao Ji, Chuang-Yao Zhao, Qi-Bin Dai, Shu-Heng Han, Ding-Cai Zhang, Ya‐Ling He, Wen-Quan Tao (2014). Experimental Study of Water Cooled Condenser Made of Three Dimensional and High Fin Density Integral-Finned Tubes.DOI
714. Yongliang Feng, Wen-Quan Tao (2014). A Compressible Thermal Lattice Boltzmann Model with Factorization Symmetry. Numerical Heat Transfer Part B Fundamentals.DOI
715. Jianfei Zhang, Chu Zhao, Hongyan Li, Wen-Quan Tao (2014). 3D Numerical Simulation of Heat Transfer of a Heated Plate under the Electric Field Generated by a Needle Electrode. Mathematical Problems in Engineering.DOI
716. Ming-Jia Li, Chen-Xi Song, Ya‐Ling He, Wen-Quan Tao (2014). Examining the Volatility Degree of Mutual Influence among Different Variables: Thermal Power Plants. Energy Procedia.DOI
717. Wen‐Tao Ji, Chuang-Yao Zhao, Ya‐Ling He, Guannan Xi, Wen-Quan Tao (2014). Vapor Flow Effect on Falling Film Evaporation of R134a Outside Horizontal Tube Bundle. International Heat Transfer Conference (IHTC).DOI
718. Ding-Cai Zhang, Wen‐Tao Ji, Jiadi Du, Zhen Zhang, Xiaowei Fan, Ya‐Ling He, Wen-Quan Tao (2014). Parameter Comparison of Condensation Heat Transfer of R134a Outside Horizontal Low-Finned Tubes. International Heat Transfer Conference (IHTC).DOI
719. 唐桂华，盛强，叶培兴，陶文铨（2013）. 微多孔介质中复杂流体传输特性研究. 《中国力学大会——2013论文摘要集》.
720. 李文强，屈治国，陶文铨（2013）. 采用金属泡沫-相变材料复合结构的大功率锂离子蓄电池热管理系统实验研究. 《中国力学大会——2013论文摘要集》.
721. 李兆辉，张剑飞，陶文铨（2013）. DES湍流模型计算Re=3900的圆柱扰流. 《工程热物理学报》.
722. 张剑飞，陶文铨，何雅玲（2013）. 螺旋折流板换热器的协同角分布特性及局部换热特征. 《化工学报》.
723. 席奂，李明佳，何雅玲，陶文铨（2013）. CE图:一种余热利用循环及工质选择的定量评价方法. 《西安交通大学学报》.
724. 吴明，李明佳，何雅玲，陶文铨（2013）. 太阳能热发电用高温混凝土储热系统性能分析. 《西安交通大学学报》.
725. 吴志根，陶文铨（2013）. 金属矩阵材料在相变蓄热中的强化换热分析. 《工程热物理学报》.
726. 栾辉宝，陶文铨，朱国庆，陈斌，王崧（2013）. 全焊接板式换热器发展综述. 《中国科学:技术科学》.
727. 李仲珍，郭少龙，陶文铨（2013）. 超临界LNG管内流动与换热特性研究. 《工程热物理学报》.
728. 封永亮，喻志强，李增耀，陶文铨（2013）. LBM与ACM耦合求解多孔介质非稳态流动. 《工程热物理学报》.
729. 唐振，孙志新，李增耀，何雅玲，陶文铨（2013）. 槽式太阳能集热器真空夹层传热的数值模拟. 《工程热物理学报》.
730. 张虎，李增耀，丹聃，陶文铨（2013）. 气氛压力对纳米多孔材料等效热导率的影响. 《工程热物理学报》.
731. 封永亮，栾辉宝，陈黎，凌空，喻志强，李增耀，陶文铨（2013）. LBM与ACM多尺度耦合方法. 《工程热物理学报》.
732. 李文强，屈治国，陶文铨（2013）. 金属泡沫内固-液相变数值模拟研究. 《工程热物理学报》.
733. Mingxuan Li, Weijiang Zhou, J.F. Zhang, Jie Fan, Y.L. He, Wen‐Quan Tao (2013). Heat transfer and pressure performance of a plain fin with radiantly arranged winglets around each tube in fin-and-tube heat transfer surface. International Journal of Heat and Mass Transfer.DOI
734. Ya‐Ling He, Fuqing Cui, Ze-Dong Cheng, Zeng-Yao Li, Wen‐Quan Tao (2013). Numerical simulation of solar radiation transmission process for the solar tower power plant: From the heliostat field to the pressurized volumetric receiver. Applied Thermal Engineering.DOI
735. Liang-Dong Ma, Zeng-Yao Li, Wen‐Quan Tao (2013). Large eddy simulation of turbulent flow and heat transfer in a square duct with unstable natural convection on the cross section. International Journal of Heat and Mass Transfer.DOI
736. Hwataik Han, Y.L. He, Wen‐Quan Tao (2013). A numerical study of the deposition characteristics of sulfuric acid vapor on heat exchanger surfaces. Chemical Engineering Science.DOI
737. Huaibin Gao, Zhiguo Qu, Xiangbo Feng, Wen‐Quan Tao (2013). Methane/air premixed combustion in a two-layer porous burner with different foam materials. Fuel.DOI
738. Li Chen, Yong-Liang Feng, Chen-Xi Song, Lei Chen, Ya‐Ling He, Wen‐Quan Tao (2013). Multi-scale modeling of proton exchange membrane fuel cell by coupling finite volume method and lattice Boltzmann method. International Journal of Heat and Mass Transfer.DOI
739. Yungang Wang, Qinxin Zhao, Qulan Zhou, Zijin Kang, Wen‐Quan Tao (2013). Experimental and numerical studies on actual flue gas condensation heat transfer in a left–right symmetric internally finned tube. International Journal of Heat and Mass Transfer.DOI
740. Jianfei Zhang, Shaolong Guo, Zhongzhen Li, Jinping Wang, Ya‐Ling He, Wen‐Quan Tao (2013). Experimental performance comparison of shell-and-tube oil coolers with overlapped helical baffles and segmental baffles. Applied Thermal Engineering.DOI
741. W.Q. Li, Zhiguo Qu, Baogen Zhang, Kai Zhao, Wen‐Quan Tao (2013). Thermal behavior of porous stainless-steel fiber felt saturated with phase change material. Energy.DOI
742. C. Bi, G.H. Tang, Wen‐Quan Tao (2013). Heat transfer enhancement in mini-channel heat sinks with dimples and cylindrical grooves. Applied Thermal Engineering.DOI
743. Li Chen, Ya‐Ling He, Wen‐Quan Tao (2013). Effects of surface microstructures of gas diffusion layer on water droplet dynamic behaviors in a micro gas channel of proton exchange membrane fuel cells. International Journal of Heat and Mass Transfer.DOI
744. Jin Yu, G.H. Tang, Ya‐Ling He, Wen‐Quan Tao (2013). Parametric study and field synergy principle analysis of H-type finned tube bank with 10 rows. International Journal of Heat and Mass Transfer.DOI
745. Ya‐Ling He, Hanbing Ke, Fuqing Cui, Wen-Quan Tao (2013). Explanations on the onset and damping behaviors in a standing-wave thermoacoustic engine. Applied Thermal Engineering.DOI
746. Lei Chen, Ya‐Ling He, Wen‐Quan Tao (2013). The Temperature Effect on the Diffusion Processes of Water and Proton in the Proton Exchange Membrane Using Molecular Dynamics Simulation. Numerical Heat Transfer Part A Applications.DOI
747. Li Chen, Qinjun Kang, Yaling He, Wen‐Quan Tao, Piotr Zelenay (2013). Pore-Scale Simulation of Water Vapor Generation, Condensation, and Transport in the Cathode of a Proton Exchange Membrane Fuel Cell. ECS Meeting Abstracts.DOI
748. Wenjing Zhou, H. B. Luan, Yiannian He, Jie Sun, Wen‐Quan Tao (2013). A study on boundary force model used in multiscale simulations with non-periodic boundary condition. Microfluidics and Nanofluidics.DOI
749. Ming Wu, Ming-Jia Li, Chao Xu, Ya‐Ling He, Wen‐Quan Tao (2013). The impact of concrete structure on the thermal performance of the dual-media thermocline thermal storage tank using concrete as the solid medium. Applied Energy.DOI
750. Yanping Yuan, Nan Zhang, Wen‐Quan Tao, Xiaoling Cao, Ya‐Ling He (2013). Fatty acids as phase change materials: A review. Renewable and Sustainable Energy Reviews.DOI
751. Huaibin Gao, Zhiguo Qu, Xiangbo Feng, Wen‐Quan Tao (2013). Combustion of methane/air mixtures in a two-layer porous burner: A comparison of alumina foams, beads, and honeycombs. Experimental Thermal and Fluid Science.DOI
752. Ming-Jia Li, Ya‐Ling He, Qinjun Kang, Wen‐Quan Tao (2013). Coupled numerical approach combining finite volume and lattice Boltzmann methods for multi-scale multi-physicochemical processes. Journal of Computational Physics.DOI
753. Yu Zhao, Bo Yu, Wen‐Quan Tao (2013). An Improved Paving Method of Automatic Quadrilateral Mesh Generation. Numerical Heat Transfer Part B Fundamentals.DOI
754. Zhi-Qiang Yu, Yongliang Feng, Wenjing Zhou, Jin Yu, Mingjie Li, Zeng-Yao Li, Wen‐Quan Tao (2013). Study on flow and heat transfer characteristics of composite porous material and its performance analysis by FSP and EDEP. Applied Energy.DOI
755. Tao-Feng Cao, Hong Lin, Li Chen, Ya‐Ling He, Wen‐Quan Tao (2013). Numerical investigation of the coupled water and thermal management in PEM fuel cell. Applied Energy.DOI
756. Li Chen, Qinjun Kang, Bruce A. Robinson, Ya‐Ling He, Wen‐Quan Tao (2013). Pore-scale modeling of multiphase reactive transport with phase transitions and dissolution-precipitation processes in closed systems. Physical Review E.DOI
757. Defeng Sun, Jie Xu, P. Ding, Wen‐Quan Tao (2013). Implementation of the Ideal Algorithm on Unsteady Two-Phase Flows and Application Examples. Numerical Heat Transfer Part B Fundamentals.DOI
758. Lin Wang, Bo Yu, Xinran Wang, Peng Wang, Wen‐Quan Tao (2013). Study on the Second-Order Additional Source Term Method for Handling Boundary Conditions. Numerical Heat Transfer Part B Fundamentals.DOI
759. Zhiguo Qu, Huijin Xu, Wen‐Quan Tao (2013). CONJUGATED NATURAL CONVECTION IN HORIZONTAL ANNULI PARTIALLY FILLED WITH METALLIC FOAMS BY USING TWO-EQUATION MODEL. Journal of Porous Media.DOI
760. Lin Wang, Bo Yu, Yi Wang, Xin ran Wang, Jinjia Wei, Wen‐Quan Tao (2013). A technical note on stability analysis of the composite high-resolution schemes satisfying convective boundedness criteria. Progress in Computational Fluid Dynamics An International Journal.DOI
761. 陈则韶，陶文铨，朱延文，胡芃（2012）. 空气/水双源热泵废热再用热水装置的性能分析. 《中国科学:技术科学》.
762. 毕成，唐桂华，陶文铨（2012）. 微酒窝通道与圆柱面凹槽通道对流传热强化分析. 《工程热物理学报》.
763. 谷伟，张虎，李增耀，陶文铨（2012）. 多组分传质过程的Maxwell-Stefan方法模拟. 《工程热物理学报》.
764. 曹涛锋，林鸿，何雅玲，陶文铨（2012）. PEMFC气体扩散层内各向异性传递过程数值模拟. 《工程热物理学报》.
765. 谢涛，何雅玲，陶文铨（2012）. 随机结构多孔介质等效热导率数值计算. 《工程热物理学报》.
766. 凌空，封永亮，陶文铨（2012）. 带环状翅片管式相变储热器的数值模拟. 《工程热物理学报》.
767. 陈黎，林鸿，曹涛锋，陶文铨（2012）. 气体扩散层表面微观结构对液态水在气体通道中运动过程的影响. 《工程热物理学报》.
768. 周文静，栾辉宝，孙杰，何雅玲，陶文铨（2012）. FVM-MD耦合算法中非周期性边界条件的研究. 《工程热物理学报》.
769. 王世博，唐桂华，叶培兴，陶文铨（2012）. 微多孔介质非牛顿流体格子Boltzmann模拟. 《工程热物理学报》.
770. 马静，李临平，陶文铨，何雅玲（2012）. 保温层对空心砖当量导热系数影响的数值研究. 《工程热物理学报》.
771. 刘鹤，李增耀，胡子君，陶文铨（2012）. 气凝胶单元体模型结构参数与等效热导率研究. 《工程热物理学报》.
772. 谷伟，张虎，李增耀，陶文铨（2012）. 混合气体在典型多孔介质内扩散过程的数值模拟. 《西安交通大学学报》.
773. 孙东亮，徐进良，陶文铨（2012）. IDEAL算法在非稳态两相流问题中的性能分析. 《化工学报》.
774. 赵越，唐桂华，李增耀，陶文铨（2012）. 材料介电函数对两球形纳米颗粒间近场辐射特性的影响. 《化工学报》.
775. 李欣，张剑飞，何雅玲，陶文铨（2012）. 二维流场、热结构松耦合模拟研究. 《工程热物理学报》.
776. 张东伟，何雅玲，王勇，陶文铨（2012）. 平行板叠末端交变流场的可视化实验研究. 《工程热物理学报》.
777. Yungang Wang, Qinxin Zhao, Zhixiang Zhang, Zhichao Zhang, Wen‐Quan Tao (2012). Mechanism research on coupling effect between dew point corrosion and ash deposition. Applied Thermal Engineering.DOI
778. Zhiguo Qu, Huijin Xu, Wen‐Quan Tao (2012). Fully developed forced convective heat transfer in an annulus partially filled with metallic foams: An analytical solution. International Journal of Heat and Mass Transfer.DOI
779. Y.L. He, Hwataik Han, Wen‐Quan Tao, Yuwen Zhang (2012). Numerical study of heat-transfer enhancement by punched winglet-type vortex generator arrays in fin-and-tube heat exchangers. International Journal of Heat and Mass Transfer.DOI
780. Ming-Jia Li, Hui-Bao Luan, Yongliang Feng, Chenxi Song, Ya‐Ling He, Wen‐Quan Tao (2012). Coupling between finite volume method and lattice Boltzmann method and its application to fluid flow and mass transport in proton exchange membrane fuel cell. International Journal of Heat and Mass Transfer.DOI
781. Ya‐Ling He, Pan Chu, Wen‐Quan Tao, Yuwen Zhang, Tao Xie (2012). Analysis of heat transfer and pressure drop for fin-and-tube heat exchangers with rectangular winglet-type vortex generators. Applied Thermal Engineering.DOI
782. Zhiguo Qu, T. S. Wang, Wen‐Quan Tao, T.J. Lu (2012). A theoretical octet-truss lattice unit cell model for effective thermal conductivity of consolidated porous materials saturated with fluid. Heat and Mass Transfer.DOI
783. J M Wu, Wen‐Quan Tao (2012). Effect of longitudinal vortex generator on heat transfer in rectangular channels. Applied Thermal Engineering.DOI
784. Zhiguo Qu, Huijin Xu, Wen‐Quan Tao (2012). Numerical Simulation of Non-Equilibrium Conjugate Heat Transfer in Tubes Partially Filled with Metallic Foams. Journal of Thermal Science and Technology.DOI
785. Dongwei Zhang, Ya‐Ling He, Weiwei Yang, Yong Wang, Wen-Quan Tao (2012). Particle image velocimetry measurement on the oscillatory flow at the end of the thermoacoustic parallel stacks. Applied Thermal Engineering.DOI
786. Wen‐Tao Ji, Chuang-Yao Zhao, Ding-Cai Zhang, Ya‐Ling He, Wen-Quan Tao (2012). Influence of condensate inundation on heat transfer of R134a condensing on three dimensional enhanced tubes and integral-fin tubes with high fin density. Applied Thermal Engineering.DOI
787. C. Bi, G.H. Tang, Wen‐Quan Tao (2012). Prediction of the gaseous thermal conductivity in aerogels with non-uniform pore-size distribution. Journal of Non-Crystalline Solids.DOI
788. Zhiguo Qu, Tiansong Wang, Wen‐Quan Tao, Tianjian Lu (2012). Experimental study of air natural convection on metallic foam-sintered plate. International Journal of Heat and Fluid Flow.DOI
789. Guojun Yu, Bo Yu, Shuyu Sun, Wen‐Quan Tao (2012). Comparative Study on Triangular and Quadrilateral Meshes by a Finite-Volume Method with a Central Difference Scheme. Numerical Heat Transfer Part B Fundamentals.DOI
790. Huaibin Gao, Zhiguo Qu, Wen‐Quan Tao, Yaling He (2012). Experimental investigation of methane/(Ar, N2, CO2)–air mixture combustion in a two-layer packed bed burner. Experimental Thermal and Fluid Science.DOI
791. Zhiguo Qu, W.Q. Li, Jinglong Wang, Wen‐Quan Tao (2012). Passive thermal management using metal foam saturated with phase change material in a heat sink. International Communications in Heat and Mass Transfer.DOI
792. Li Chen, Hui-Bao Luan, Ya‐Ling He, Wen‐Quan Tao (2012). Effects of Roughness of Gas Diffusion Layer Surface on Liquid Water Transport in Micro Gas Channels of a Proton Exchange Membrane Fuel Cell. Numerical Heat Transfer Part A Applications.DOI
793. Jie Fan, Wancheng Ding, Y.L. He, Wen‐Quan Tao (2012). Three-Dimensional Numerical Study of Fluid and Heat Transfer Characteristics of Dimpled Fin Surfaces. Numerical Heat Transfer Part A Applications.DOI
794. Chao Fu Wei, Zhao-Jun Liu, Zeng-Yao Li, Zhiguo Qu, Wen‐Quan Tao (2012). Numerical Study on Some Improvements in the Passive Cooling System of a Radio Base Station. Numerical Heat Transfer Part A Applications.DOI
795. Li Chen, Qinjun Kang, Ya‐Ling He, Wen‐Quan Tao (2012). Pore-scale simulation of coupled multiple physicochemical thermal processes in micro reactor for hydrogen production using lattice Boltzmann method. International Journal of Hydrogen Energy.DOI
796. Huaibin Gao, Zhiguo Qu, Ya‐Ling He, Wen‐Quan Tao (2012). Experimental study of combustion in a double-layer burner packed with alumina pellets of different diameters. Applied Energy.DOI
797. Li Chen, Qinjun Kang, Ya‐Ling He, Wen‐Quan Tao (2012). Mesoscopic Study of the Effects of Gel Concentration and Materials on the Formation of Precipitation Patterns. Langmuir.DOI
798. Li Chen, Hui-Bao Luan, Ya‐Ling He, Wen‐Quan Tao (2012). Numerical investigation of liquid water transport and distribution in porous gas diffusion layer of a proton exchange membrane fuel cell using lattice Boltzmann method. Russian Journal of Electrochemistry.DOI
799. Wenjing Zhou, H. B. Luan, Jie Sun, Ya‐Ling He, Wen‐Quan Tao (2012). A Molecular Dynamics and Lattice Boltzmann Multiscale Simulation for Dense Fluid Flows. Numerical Heat Transfer Part B Fundamentals.DOI
800. Hong Lin, Tao-Feng Cao, Li Chen, Ya‐Ling He, Wen‐Quan Tao (2012). In situ measurement of temperature distribution within a single polymer electrolyte membrane fuel cell. International Journal of Hydrogen Energy.DOI
801. Zeshao Chen, Wen‐Quan Tao, YanWen Zhu, Peng Hu (2012). Performance analysis of air-water dual source heat pump water heater with heat recovery. Science China Technological Sciences.DOI
802. Lin Wang, Bo Yu, Yi Wang, Xinran Wang, Qingyuan Wang, Wen‐Quan Tao (2012). Study on General Governing Equations of Computational Heat Transfer and Fluid Flow. Communications in Computational Physics.DOI
803. Ya‐Ling He, Danhua Mei, Wen‐Quan Tao, Weiwei Yang, Huai-Liang Liu (2012). Simulation of the parabolic trough solar energy generation system with Organic Rankine Cycle. Applied Energy.DOI
804. Li Chen, Tao-Feng Cao, Zhaohui Li, Ya‐Ling He, Wen‐Quan Tao (2012). Numerical investigation of liquid water distribution in the cathode side of proton exchange membrane fuel cell and its effects on cell performance. International Journal of Hydrogen Energy.DOI
805. G.H. Tang, Yi Lu, Shuwen Zhang, F.F. Wang, Wen‐Quan Tao (2012). Experimental investigation of non-Newtonian liquid flow in microchannels. Journal of Non-Newtonian Fluid Mechanics.DOI
806. Ya‐Ling He, Wen‐Quan Tao (2012). Multiscale Simulations of Heat Transfer and Fluid Flow Problems. ASME Journal of Heat and Mass Transfer.DOI
807. Zirui Xu, Zhiguo Qu, Changying Zhao, Wen‐Quan Tao (2012). EXPERIMENTAL STUDY OF POOL BOILING HEAT TRANSFER ON METALLIC FOAM SURFACE WITH U-SHAPED AND V-SHAPED GROOVES. Enhanced heat transfer/Journal of enhanced heat transfer.DOI
808. Xuehong Wu, Yanjun Dai, Wen‐Quan Tao (2012). MLPG/SUPG Method for Convection-Dominated Problems. Numerical Heat Transfer Part B Fundamentals.DOI
809. Zhiguo Qu, Dachao Li, Jun Huang, Zhou Xu, Xianglei Liu, Wen‐Quan Tao (2012). Experimental Investigations of Pool Boiling Heat Transfer on Horizontal Plate Sintered with Metallic Fiber Felt. International Journal of Green Energy.DOI
810. Dongwei Zhang, Ya‐Ling He, Weiwei Yang, Xin Gu, Yong Wang, Wen-Quan Tao (2012). Experimental visualization and heat transfer analysis of the oscillatory flow in thermoacoustic stacks. Experimental Thermal and Fluid Science.DOI
811. Peng Yuan, G.B. Jiang, Yi He, X.L. Yi, Wen-Quan Tao (2012). Experimental study on the performance of a novel structure for two-phase flow distribution in parallel vertical channels. International Journal of Multiphase Flow.DOI
812. Qing Li, Kai Luo, Ya‐Ling He, Yuan Gao, Wen-Quan Tao (2012). Coupling lattice Boltzmann model for simulation of thermal flows on standard lattices. Physical Review E.DOI
813. Tao Wenquan (2012). Simulation on Diffusion Processes of Multicomponent Gas Mixture in Typical Porous Media. Xi'an Jiaotong Daxue xuebao.
814. Tao Wenquan (2012). Performance analysis of IDEAL algorithm on unsteady two-phase flows.
815. 汪天送，屈治国，陶文铨，卢天健（2011）. 烧结开孔金属泡沫壁的辐射和自然对流耦合换热试验研究. 《机械工程学报》.
816. 吴学红，朱兴旺，申胜平，陶文铨（2011）. 对流项占优问题的MLPG/SUPG方法数值模拟. 《计算力学学报》.
817. 栾辉宝，徐辉，陈黎，陶文铨（2011）. FVM与LBM分区耦合模拟圆柱绕流. 《计算力学学报》.
818. 李斌，陶文铨（2011）. 百叶窗肋片流动与传热数值模拟与结构优化. 《暖通空调》.
819. 李斌，陶文铨（2011）. 5mm管径百叶窗翅片流动与传热数值模拟. 《天津大学学报(自然科学与工程技术版)》.
820. 陈黎，栾辉宝，陶文铨（2011）. PEMFC中粗糙GDL表面对液态水在GC中传输过程的影响. 《化工学报》.
821. 徐会金，屈治国，杜艳平，何雅玲，陶文铨，卢天健（2011）. 内壁填充环状金属泡沫的管内流动凝结换热. 《化工学报》.
822. 袁培，姜国宝，张菲妮，何雅玲，谭民邦，陶文铨（2011）. 板翅式换热器两相流分配器. 《化工学报》.
823. 黄金印，屈治国，李定国，徐治国，陶文铨（2011）. 紫铜纤维毡水平表面的池沸腾换热性能. 《化工学报》.
824. 陈黎，栾辉宝，陶文铨（2011）. PEMFC气体通道表面润湿特性对气体扩散层中水分布的影响. 《化工学报》.
825. 栾辉宝，陈黎，周文静，孙杰，何雅玲，陶文铨（2011）. 格子Boltzmann方法分布函数重构算子的应用. 《工程热物理学报》.
826. 殷欣，何雅玲，陶文铨，孙杰（2011）. 粗糙微通道内液体流动的多尺度耦合模拟. 《工程热物理学报》.
827. 丁鹏，陶文铨（2011）. 管翅式换热器流动和换热的低阶模型模拟. 《中国石油大学学报(自然科学版)》.
828. 封永亮，喻志强，李增耀，陶文铨（2011）. 太阳能吸热器玻璃窗辐射与导热计算. 《工程热物理学报》.
829. 曹涛锋，林鸿，陶文铨（2011）. 质子交换膜燃料电池温度和电流分布同步测定. 《化工学报》.
830. 范宗良，张虎，陶文铨（2011）. 两种平直内翅管流动与换热实验研究. 《工程热物理学报》.
831. 周文静，栾辉宝，孙杰，何雅玲，陶文铨（2011）. FVM-MD耦合算法在碳纳米管绕流中的应用. 《工程热物理学报》.
832. 阳祥，李增耀，陶文铨（2011）. 浮升力在竖直通道湍流中的作用. 《西安交通大学学报》.
833. 栾辉宝，徐辉，陈黎，陶文铨（2011）. 有限体积法与LBM分区耦合模拟方腔自然对流. 《西安交通大学学报》.
834. 马良栋，李增耀，陶文铨（2011）. 矩形通道内具有Rayleigh-Benard对流的湍流换热大涡模拟. 《西安交通大学学报》.
835. 陈磊，林鸿，陶文铨（2011）. 温度对质子交换膜扩散性能影响的分子动力学模拟. 《西安交通大学学报》.
836. 戴艳俊，李欣，陶文铨（2011）. 几何参数对低波纹通道流动与换热特性的影响. 《工程热物理学报》.
837. 王杰利，屈治国，李文强，陶文铨，卢天健（2011）. 封装有相变材料的金属泡沫复合散热器实验研究. 《工程热物理学报》.
838. 汪天送，屈治国，何雅玲，陶文铨（2011）. 烧结金属纤维板大空间自然对流实验研究. 《工程热物理学报》.
839. 郭剑飞，李增耀，屈治国，冀文涛，陶文铨（2011）. 水平金属泡沫管外R134a凝结传热实验研究. 《工程热物理学报》.
840. Yuetao Shi, Ming Gao, G.H. Tang, Fengzhong Sun, Wen‐Quan Tao (2011). Experimental research of CFB ash deposition on helical finned tubes. Applied Thermal Engineering.DOI
841. W.Q. Li, Zhiguo Qu, Y.L. He, Wen‐Quan Tao (2011). Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin. Applied Thermal Engineering.DOI
842. G.H. Tang, Haowei Hu, Z.N. Zhuang, Wen‐Quan Tao (2011). Film condensation heat transfer on a horizontal tube in presence of a noncondensable gas. Applied Thermal Engineering.DOI
843. Wen‐Tao Ji, Ding-Cai Zhang, Ya‐Ling He, Wen‐Quan Tao (2011). Prediction of fully developed turbulent heat transfer of internal helically ribbed tubes ? An extension of Gnielinski equation. International Journal of Heat and Mass Transfer.DOI
844. Li Chen, Hui-Bao Luan, Ya‐Ling He, Wen‐Quan Tao (2011). Pore-scale flow and mass transport in gas diffusion layer of proton exchange membrane fuel cell with interdigitated flow fields. International Journal of Thermal Sciences.DOI
845. Huaibin Gao, Zhiguo Qu, Wen‐Quan Tao, Ya‐Ling He, Jian Hua Zhou (2011). Experimental Study of Biogas Combustion in a Two-Layer Packed Bed Burner. Energy & Fuels.DOI
846. Zirui Xu, Zhiguo Qu, Changying Zhao, Wen‐Quan Tao (2011). Pool boiling heat transfer on open-celled metallic foam sintered surface under saturation condition. International Journal of Heat and Mass Transfer.DOI
847. Huijin Xu, Zhiguo Qu, Wen‐Quan Tao (2011). Analytical solution of forced convective heat transfer in tubes partially filled with metallic foam using the two-equation model. International Journal of Heat and Mass Transfer.DOI
848. Jiangbo Wu, Wen‐Quan Tao (2011). Impact of delta winglet vortex generators on the performance of a novel fin-tube surfaces with two rows of tubes in different diameters. Energy Conversion and Management.DOI
849. Wancheng Ding, Jie Fan, Y.L. He, Wen‐Quan Tao, Y.X. Zheng, Yifeng Gao, Jian Song (2011). A general simulation model for performance prediction of plate fin-and-tube heat exchanger with complex circuit configuration. Applied Thermal Engineering.DOI
850. Hui-Bao Luan, Hui Xu, Li Chen, Dongliang Sun, Ya‐Ling He, Wen‐Quan Tao (2011). Evaluation of the coupling scheme of FVM and LBM for fluid flows around complex geometries. International Journal of Heat and Mass Transfer.DOI
851. Wen‐Tao Ji, Zhiguo Qu, Zeng-Yao Li, Jian-Fei Guo, Ding-Cai Zhang, Wen-Quan Tao (2011). Pool boiling heat transfer of R134a on single horizontal tube surfaces sintered with open-celled copper foam. International Journal of Thermal Sciences.DOI
852. Xuehong Wu, Zhijuan Chang, YanLi Lu, Wen‐Quan Tao, Shengping Shen (2011). An analysis of the convection–diffusion problems using meshless and meshbased methods. Engineering Analysis with Boundary Elements.DOI
853. Hui Xu, Hui-Bao Luan, Ya‐Ling He, Wen‐Quan Tao (2011). A lifting relation from macroscopic variables to mesoscopic variables in lattice Boltzmann method: Derivation, numerical assessments and coupling computations validation. Computers & Fluids.DOI
854. H. B. Luan, Haibo Xu, Liang Chen, Yongchang Feng, Y.L. He, Wen‐Quan Tao (2011). Coupling of finite volume method and thermal lattice Boltzmann method and its application to natural convection. International Journal for Numerical Methods in Fluids.DOI
855. D.L. Sun, Q.P. Liu, Jie Xu, Wen‐Quan Tao (2011). Effects of inner iteration times on the performance of IDEAL algorithm. International Communications in Heat and Mass Transfer.DOI
856. Huijin Xu, Zhiguo Qu, Tian Jian Lu, Ya‐Ling He, Wen‐Quan Tao (2011). Thermal Modeling of Forced Convection in a Parallel-Plate Channel Partially Filled With Metallic Foams. ASME Journal of Heat and Mass Transfer.DOI
857. Jie Sun, Ya‐Ling He, Wen‐Quan Tao, Xin Yin, Huasheng Wang (2011). Roughness effect on flow and thermal boundaries in microchannel/nanochannel flow using molecular dynamics‐continuum hybrid simulation. International Journal for Numerical Methods in Engineering.DOI
858. Yu Wang, Ya‐Ling He, Danhua Mei, Wen‐Quan Tao (2011). Optimization design of slotted fin by numerical simulation coupled with genetic algorithm. Applied Energy.DOI
859. Dagang Guo, D. L. Sun, Ze Li, Wen‐Quan Tao (2011). Phase Change Heat Transfer Simulation for Boiling Bubbles Arising from a Vapor Film by the VOSET Method. Numerical Heat Transfer Part A Applications.DOI
860. Yanjun Dai, Xuehong Wu, Wen‐Quan Tao (2011). Weighted Least-Squares Collocation Method (WLSCM) for 2-D and 3-D Heat Conduction Problems in Irregular Domains. Numerical Heat Transfer Part B Fundamentals.DOI
861. Liang Gong, Krishna M. Kota, Wen‐Quan Tao, Yogendra Kumar Joshi (2011). Thermal Performance of Microchannels With Wavy Walls for Electronics Cooling. IEEE Transactions on Components Packaging and Manufacturing Technology.DOI
862. Ju-Fang Fan, Ya‐Ling He, Wen‐Quan Tao (2011). Application of Combined Enhanced Techniques for Design of Highly Efficient Air Heat Transfer Surface. Heat Transfer Engineering.DOI
863. Zhixin Sun, Zhen Tang, Ya‐Ling He, Wen‐Quan Tao (2011). Proper cell dimension and number of particles per cell for DSMC. Computers & Fluids.DOI
864. Huijin Xu, Zhiguo Qu, Wen‐Quan Tao (2011). Thermal transport analysis in parallel-plate channel filled with open-celled metallic foams. International Communications in Heat and Mass Transfer.DOI
865. Jie Sun, Ya‐Ling He, Wen‐Quan Tao (2011). A molecular dynamics study on heat and mass transfer in condensation over smooth/rough surface. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
866. Zheng Miao, Ya‐Ling He, Tianshou S. Zhao, Wen‐Quan Tao (2011). NUMERICAL INVESTIGATION OF HEAT TRANSPORT IN A DIRECT METHANOL FUEL CELL WITH ANISOTROPIC GAS DIFFUSION LAYERS. Frontiers in Heat and Mass Transfer.DOI
867. Liang Gong, Krishna M. Kota, Wen‐Quan Tao, Yogendra Kumar Joshi (2011). Parametric Numerical Study of Flow and Heat Transfer in Microchannels With Wavy Walls. ASME Journal of Heat and Mass Transfer.DOI
868. Dong-Liang Son, Wen‐Quan Tao, Jinliang Xu, Zhiguo Qu (2011). Implementation of the IDEAL Algorithm on Nonorthogonal Curvilinear Coordinates for the Solution of 3-D Incompressible Fluid Flow and Heat Transfer Problems. Numerical Heat Transfer Part B Fundamentals.DOI
869. Dongliang Sun, Yongping Yang, Jinliang Xu, Wen‐Quan Tao (2011). An Improved Volume of Fluid Method for Two-Phase Flow Computations on Collocated Grid System. ASME Journal of Heat and Mass Transfer.DOI
870. Yubing Tao, Ya‐Ling He, Zhiguo Qu, Wen‐Quan Tao (2011). Numerical study on performance and fin efficiency of wavy fin-and-tube heat exchangers. Progress in Computational Fluid Dynamics An International Journal.DOI
871. Yang Du, Zhiguo Qu, Huijin Xu, Z.Y. Li, C.Y. Zhao, Wen‐Quan Tao (2011). Numerical simulation of film condensation on vertical plate embedded in metallic foams. Progress in Computational Fluid Dynamics An International Journal.DOI
872. Huaibin Gao, Zhiguo Qu, Wen‐Quan Tao, Tian Jian Lu (2011). Experimental Investigation of CH4 and C3H8 Combustion in a Packed Bed Burner. Volume 4: Energy Systems Analysis, Thermodynamics and Sustainability; Combustion Science and Engineering; Nanoengineering for Energy, Parts A and B.DOI
873. Yuan Yanping, Tao Wenquan, Cao Xiaoling, Bai Li (2011). Theoretic Prediction of Melting Temperature and Latent Heat for a Fatty Acid Eutectic Mixture. Journal of Chemical & Engineering Data.DOI
874. Tao Wenquan (2011). Numerical Simulation on Flow and Heat Transfer in Louver Fin Surface with Tube-Diameter of 5 mm. Journal of Tianjin University Science and Technology.
875. Tao Wenquan (2011). Buoyancy Effect on Turbulent Flow in a Vertical Channel. Xi'an Jiaotong Daxue xuebao.
876. Hui-Bao Luan, Hui Xu, Chen Li, Tao Wenquan (2011). Coupling of FVM and LBM for Natural Convection in a Square Cavity. Xi'an Jiaotong Daxue xuebao.
877. Tao Wenquan (2011). Heat transfer performance of pool boiling on horizontal surface sintered with copper fiber felt.
878. Tao Wenquan (2011). Molecular Dynamics Simulation of Temperture Effect on Diffusion Process of Water and Proton in Proton Exchange Membrane. Xi'an Jiaotong Daxue xuebao.
879. Tao Wenquan (2011). A method for measuring potential distribution of PEMFC. Chinese Journal of Power Sources.
880. Tao Wenquan (2011). Effects of gas channel wall wettability on liquid water distribution and transport in gas diffusion layer of proton exchange membrane fuel cell.
881. Tao Wenquan (2011). Numerical simulation of convection-domained problems using MLPG/SUPG method. Jisuan lixue xuebao.
882. Tao Wenquan (2011). Liquid water transport behaviors in micro PEMFC gas channels with rough gas diffusion layer surface.
883. Tao Wenquan (2011). Synchronous measurement of temperature and current density distribution of PEMFC.
884. 陶文铨（2010）. 场协同原理及其应用. 《新观点新学说学术沙龙文集38：热学新理论及其应用》.
885. 栾辉宝，徐辉，陈黎，陶文铨（2010）. FVM与LBM耦合模拟三维流动问题. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）论文集》.
886. 栾辉宝，徐辉，陈黎，陶文铨（2010）. FVM与LBM分区耦合模拟远场边界条件下的圆柱绕流. 《中国计算力学大会'2010（CCCM2010）暨第八届南方计算力学学术会议（SCCM8）论文集》.
887. 巩亮，何雅玲，丁文静，陶文铨（2010）. 3代脉管制冷机的工作原理和性能的全场数值模拟. 《航空学报》.
888. 李小飞，唐桂华，叶培兴，陶文铨（2010）. 圆管脉动流的轴对称格子Boltzmann模拟. 《工程热物理学报》.
889. 菅振，孙东亮，吴志根，李增耀，陶文铨（2010）. 一种处理不规则边界的二维切削网格方法. 《工程热物理学报》.
890. 阳祥，李增耀，陶文铨（2010）. 轴向旋转通道内浮升力对湍流影响的直接模拟. 《西安交通大学学报》.
891. 陶文铨，吴学红，戴艳俊（2010）. 无网格数值求解方法. 《中国电机工程学报》.
892. 陈磊，林鸿，陶文铨（2010）. PEM内水和质子扩散的分子动力学模拟. 《工程热物理学报》.
893. 唐桂华，王斐斐，毕成，陶文铨（2010）. 微尺度电渗混合强化的数值研究. 《工程热物理学报》.
894. 陈黎，栾辉宝，陶文铨（2010）. LBM模拟PEMFC阴极流动传质电化学反应过程. 《工程热物理学报》.
895. 阳祥，丁鹏，李增耀，陶文铨（2010）. 基于POD方法的湍流大尺度信息提取与分析. 《工程热物理学报》.
896. 高怀斌，屈治国，陶文铨，卢天健（2010）. 辐射模型和弥散效应对多孔介质内燃烧影响的数值模拟. 《工程热物理学报》.
897. 杜艳平，屈治国，徐会金，赵长颖，何雅玲，陶文铨（2010）. 部分填充金属泡沫水平管内沸腾实验研究. 《工程热物理学报》.
898. 冀文涛，屈治国，郭剑飞，张定才，陶文铨（2010）. 水平管外开孔铜泡沫R134a池沸腾换热实验研究. 《工程热物理学报》.
899. Xiang I. A. Yang, Zeng-Yao Li, Wen‐Quan Tao (2010). Direct numerical simulation of turbulent flow and combined convective heat transfer in a square duct with axial rotation. International Journal of Heat and Mass Transfer.DOI
900. Yang Du, Zhiguo Qu, Chuang-Yao Zhao, Wen‐Quan Tao (2010). Numerical study of conjugated heat transfer in metal foam filled double-pipe. International Journal of Heat and Mass Transfer.DOI
901. Sun-Xiao Zhang, Ya‐Ling He, Guy Lauriat, Wen‐Quan Tao (2010). Numerical studies of simultaneously developing laminar flow and heat transfer in microtubes with thick wall and constant outside wall temperature. International Journal of Heat and Mass Transfer.DOI
902. Zeng-Yuan Guo, Xiongbin Liu, Wen‐Quan Tao, R. K. Shah (2010). Effectiveness–thermal resistance method for heat exchanger design and analysis. International Journal of Heat and Mass Transfer.DOI
903. Jufang Fan, Weikun Ding, Zhi-Geng Wu, Ya‐Ling He, Wen‐Quan Tao, Yongxin Zheng, Yifeng Gao, Ji Song (2010). A new performance evaluation method and its application in fin-tube surface design of small diameter tube. Frontiers in Energy.DOI
904. G.H. Tang, S.B. Wang, P.X. Ye, Wen‐Quan Tao (2010). Bingham fluid simulation with the incompressible lattice Boltzmann model. Journal of Non-Newtonian Fluid Mechanics.DOI
905. X. F. Li, G.H. Tang, Tian-Yu Gao, Wen‐Quan Tao (2010). SIMULATION OF NEWTONIAN AND NON-NEWTONIAN AXISYMMETRIC FLOW WITH AN AXISYMMETRIC LATTICE BOLTZMANN MODEL. International Journal of Modern Physics C.DOI
906. G.H. Tang, P.X. Ye, Wen‐Quan Tao (2010). Pressure-driven and electroosmotic non-Newtonian flows through microporous media via lattice Boltzmann method. Journal of Non-Newtonian Fluid Mechanics.DOI
907. Xuehong Wu, Wen‐Quan Tao, Shengping Shen, Xingwang Zhu (2010). A stabilized MLPG method for steady state incompressible fluid flow simulation. Journal of Computational Physics.DOI
908. Li Chen, Hui-Bao Luan, Wen‐Quan Tao (2010). LIQUID WATER DYNAMIC BEHAVIORS IN THE GDL AND GC OF PEMFCS USING LATTICE BOLTZMANN METHOD. Frontiers in Heat and Mass Transfer.DOI
909. Liang Gong, Krishna M. Kota, Wen‐Quan Tao, Yogendra Kumar Joshi (2010). Thermal performance of microchannels with wavy walls for electronics cooling. I-THERM :/I-THERM - Intersociety Conference on Thermal Phenomena in Electronic Systems.DOI
910. Yu Tao, Y.L. He, Wen‐Quan Tao (2010). Exergetic analysis of transcritical CO2 residential air-conditioning system based on experimental data. Applied Energy.DOI
911. Jianfei Zhang, Ya‐Ling He, Wen‐Quan Tao (2010). A Design and Rating Method for Shell-and-Tube Heat Exchangers With Helical Baffles. ASME Journal of Heat and Mass Transfer.DOI
912. H. B. Luan, Haibo Xu, Liang Chen, Defeng Sun, Wen‐Quan Tao (2010). Numerical Illustrations of the Coupling Between the Lattice Boltzmann Method and Finite-Type Macro-Numerical Methods. Numerical Heat Transfer Part B Fundamentals.DOI
913. G.H. Tang, P.X. Ye, Wen‐Quan Tao (2010). Electroviscous effect on non-Newtonian fluid flow in microchannels. Journal of Non-Newtonian Fluid Mechanics.DOI
914. G.H. Tang, F. F. WANG, Wen‐Quan Tao (2010). LATTICE BOLTZMANN SIMULATION OF ELECTROOSMOTIC MICROMIXING BY HETEROGENEOUS SURFACE CHARGE. International Journal of Modern Physics C.DOI
915. Defeng Sun, Yili Yang, Jie Xu, Wen‐Quan Tao (2010). Performance Analysis of IDEAL Algorithm Combined with Bi-CGSTAB Method. Numerical Heat Transfer Part B Fundamentals.DOI
916. Wen‐Quan Tao, Ya‐Ling He (2010). Multiscale Simulations of Heat Transfer and Fluid Flow Problems. International Heat Transfer Conference (IHTC).DOI
917. Wenjing Zhou, Ju-Fang Fan, Zhi-Geng Wu, Ya‐Ling He, Wen‐Quan Tao (2010). An Efficient Approach for Performance Evaluation and Parameter Design of Heat Transfer Enhancing Structure. International Heat Transfer Conference (IHTC).DOI
918. Ya‐Ling He, Pan Chu, Wen‐Quan Tao (2010). Optimization and Development for Fin-and-Tube Heat Exchangers With Vortex Generators. International Heat Transfer Conference (IHTC).DOI
919. Ya‐Ling He, Zheng Miao, Wen‐Quan Tao (2010). Modeling of Heat Transport in a Direct Methanol Fuel Cell With Anisotropic Gas Diffusion Layers. International Heat Transfer Conference (IHTC).DOI
920. Qing Li, Y. L. He, G.H. Tang, Wen-Quan Tao (2010). Lattice Boltzmann modeling of microchannel flows in the transition flow regime. Microfluidics and Nanofluidics.DOI
921. Wen‐Tao Ji, Ding-Cai Zhang, Nan Feng, Jian-Fei Guo, Mitsuharu Numata, Guannan Xi, Wen-Quan Tao (2010). Nucleate Pool Boiling Heat Transfer of R134a and R134a-PVE Lubricant Mixtures on Smooth and Five Enhanced Tubes. ASME Journal of Heat and Mass Transfer.DOI
922. Yong Wang, Ya‐Ling He, Qing Li, G.H. Tang, Wen-Quan Tao (2010). LATTICE BOLTZMANN MODEL FOR SIMULATING VISCOUS COMPRESSIBLE FLOWS. International Journal of Modern Physics C.DOI
923. Tao Wenquan (2010). Direct Numerical Simulations on Influences of Buoyancy Forces on Turbulent Flow. Xi'an Jiaotong Daxue xuebao.
924. 谢旭良，陶文铨，杨洪武（2009）. 芯片冷却新型集成热管散热器的实验研究. 《华中科技大学学报(自然科学版)》.
925. 吴学红，李增耀，申胜平，陶文铨（2009）. 不规则区域热传导问题无网格Petrov-Galerkin方法的数值模拟. 《工程热物理学报》.
926. 马良栋，李增耀，陶文铨（2009）. 旋转矩形通道内湍流雷诺应力分析. 《西安交通大学学报》.
927. 马良栋，李增耀，陶文铨（2009）. 旋转矩形通道内湍流流动与换热的直接数值模拟. 《西安交通大学学报》.
928. 丁鹏，陶文铨（2009）. 求解对流换热反问题的低阶模型. 《西安交通大学学报》.
929. 屈治国，徐治国，陶文铨，卢天健（2009）. 通孔金属泡沫中的空气自然对流传热实验研究. 《西安交通大学学报》.
930. 卫星，樊进宣，林鸿，李增耀，陶文铨（2009）. 质子交换膜燃料电池动态启动特性的实验研究. 《工程热物理学报》.
931. 王勇，何雅玲，李庆，陶文铨（2009）. 热声起振现象的模拟研究. 《工程热物理学报》.
932. 孙东亮，屈治国，何雅玲，陶文铨（2009）. 求解流动与传热问题的一种高效稳定的分离式算法—IDEAL. 《工程热物理学报》.
933. 刘召军，谢旭良，李增耀，屈治国，陶文铨（2009）. 热管型散热器换热性能的实验研究及数值模拟. 《工程热物理学报》.
934. 陈鹏飞，何雅玲，陶文铨（2009）. 分子动力学模拟壁面附近流体特性及降温过程. 《工程热物理学报》.
935. 丁鹏，陶文铨（2009）. 建立低阶模型的POD方法. 《工程热物理学报》.
936. 冀文涛，冯楠，张定才，郭剑飞，陶文铨（2009）. 润滑油对水平管外R134a池沸腾换热的影响. 《工程热物理学报》.
937. 徐辉，陶文铨（2009）. 熵格子Boltzmann方法模拟高Reynolds数流动. 《工程热物理学报》.
938. 张剑飞，李斌，黄文江，雷勇刚，楚攀，李瑞，何雅玲，陶文铨（2009）. 螺旋折流板换热器流动与换热特性的试验分析. 《工程热物理学报》.
939. 陈黎，栾辉宝，陶文铨（2009）. 质子交换膜燃料电池阴极扩散层厚度方向液态水传输的格子-Boltzmann方法模拟. 《中国力学学会学术大会'2009》.
940. 徐辉，栾辉宝，陶文铨（2009）. LBM与宏观数值方法界面信息耦合的重构算子. 《西安交通大学学报》.
941. 孙杰，何雅玲，李印实，陶文铨（2009）. 水分子模型差异对汽液界面参数分布的影响. 《工程热物理学报》.
942. 张定才，冀文涛，陶文铨，何雅玲（2009）. 不凝气体对R123凝结换热的影响. 《工程热物理学报》.
943. 吴志根，戴艳俊，陶文铨（2009）. 小管径三排管开缝翅片传热特性的实验与数值研究. 《工程热物理学报》.
944. 孙杰，何雅玲，陶文铨（2009）. FV-MD耦合算法在微通道流动研究中的应用. 《工程热物理学报》.
945. 徐治国，屈治国，李定国，赵长颖，陶文铨，卢天健，王美琴（2009）. 通孔金属泡沫表面的池沸腾实验研究. 《工程热物理学报》.
946. 于乐，樊进宣，陶文铨（2009）. PEMFC局部电流密度实验研究. 《工程热物理学报》.
947. 黄志刚，李增耀，陶文铨（2009）. 太阳能高温电解水蒸气制氢系统热力学分析. 《工程热物理学报》.
948. Tao Wenquan (2009). A Reconstruction Operator for Interface Coupling Between LBM and Macro-Numerical Methods of Finite-Family. Xi'an Jiaotong Daxue xuebao.
949. Tao Wenquan (2009). Simulation of PEMFC cathode catalyst layer using LBM. Chinese Journal of Power Sources.
950. Tao Wenquan (2009). Fundamental Mechanism of Enhancing Single-phase Convective Heat Transfer.
951. D.L. Sun, Wen‐Quan Tao (2009). A coupled volume-of-fluid and level set (VOSET) method for computing incompressible two-phase flows. International Journal of Heat and Mass Transfer.DOI
952. Yonggang Lei, Ya‐Ling He, Li-Ting Tian, Pan Chu, Wen‐Quan Tao (2009). Hydrodynamics and heat transfer characteristics of a novel heat exchanger with delta-winglet vortex generators. Chemical Engineering Science.DOI
953. Yu Tao, Y.L. He, Wen‐Quan Tao, Z.G. Wu (2009). Experimental study on the performance of CO2 residential air-conditioning system with an internal heat exchanger. Energy Conversion and Management.DOI
954. Jianfei Zhang, Ya‐Ling He, Wen‐Quan Tao (2009). 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part I: Numerical model and results of whole heat exchanger with middle-overlapped helical baffles. International Journal of Heat and Mass Transfer.DOI
955. Jianfei Zhang, Ya‐Ling He, Wen‐Quan Tao (2009). 3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part II: Simulation results of periodic model and comparison between continuous and noncontinuous helical baffles. International Journal of Heat and Mass Transfer.DOI
956. Liting Tian, Ya‐Ling He, Yubing Tao, Wen‐Quan Tao (2009). A comparative study on the air-side performance of wavy fin-and-tube heat exchanger with punched delta winglets in staggered and in-line arrangements. International Journal of Thermal Sciences.DOI
957. Jie Sun, Ya‐Ling He, Wen‐Quan Tao (2009). Scale effect on flow and thermal boundaries in micro‐/nano‐channel flow using molecular dynamics–continuum hybrid simulation method. International Journal for Numerical Methods in Engineering.DOI
958. P. Chu, Y.L. He, Wen‐Quan Tao (2009). Three-Dimensional Numerical Study of Flow and Heat Transfer Enhancement Using Vortex Generators in Fin-and-Tube Heat Exchangers. ASME Journal of Heat and Mass Transfer.DOI
959. Liting Tian, Ya‐Ling He, Pan Chu, Wen‐Quan Tao (2009). Numerical Study of Flow and Heat Transfer Enhancement by Using Delta Winglets in a Triangular Wavy Fin-and-Tube Heat Exchanger. ASME Journal of Heat and Mass Transfer.DOI
960. Zhigen Wu, Jinzhao Zhang, Dongliang Sun, Wen‐Quan Tao (2009). An Efficient Solver for the Algebraic Equations Resulting from Discretization of the Governing Equations for Fluid Flow and Heat Transfer. Numerical Heat Transfer Part B Fundamentals.DOI
961. Ya‐Ling He, Jing Huang, YuBing Tao, Wen‐Quan Tao (2009). Extension of the pressure correction method to zero-Mach number compressible flows. Science China Technological Sciences.DOI
962. Zhixin Sun, Zeng-Yao Li, Ya‐Ling He, Wen‐Quan Tao (2009). Coupled solid (FVM)–fluid (DSMC) simulation of micro-nozzle with unstructured-grid. Microfluidics and Nanofluidics.DOI
963. Dongliang Sun, Zhiguo Qu, Ya‐Ling He, Wen‐Quan Tao (2009). Implementation of an efficient segregated algorithm-IDEAL on 3D collocated grid system. 《中国科学通报：英文版》.DOI
964. Dongliang Sun, Zhiguo Qu, Ya‐Ling He, Wen‐Quan Tao (2009). Performance analysis of IDEAL algorithm for three‐dimensional incompressible fluid flow and heat transfer problems. International Journal for Numerical Methods in Fluids.DOI
965. Jie Sun, Ya‐Ling He, Wen‐Quan Tao (2009). Molecular dynamics–continuum hybrid simulation for condensation of gas flow in a microchannel. Microfluidics and Nanofluidics.DOI
966. Hui Xu, Wen-Quan Tao, Yan Zhang (2009). Lattice Boltzmann model for three-dimensional decaying homogeneous isotropic turbulence. Physics Letters A.DOI
967. Tao Wenquan (2009). Reduced Order Model Based Algorithm for Inverse Convection Heat Transfer Problem. Xi'an Jiaotong Daxue xuebao.
968. 李盈海，陶文铨，孙东亮，赵长颖（2008）. 金属泡沫管内强制对流换热的数值模拟. 《西安交通大学学报》.
969. 林鸿，陶文铨（2008）. 质子交换膜燃料电池的三维数值模拟. 《西安交通大学学报》.
970. 刘启斌，何雅玲，张定才，陶文铨（2008）. R22在水平双侧强化管外池沸腾换热. 《化学工程》.
971. 张京兆，屈治国，何雅铃，陶文铨（2008）. CLEAR与SIMPLE系列的三种算法的收敛性和健壮性比较. 《工程热物理学报》.
972. 唐桂华，陶文铨，赵长颖（2008）. 微圆管进口区气体流动与换热特性研究. 《工程热物理学报》.
973. 樊菊芳，何雅铃，陶文铨（2008）. 球突翅片表面的数值模拟和特性分析. 《工程热物理学报》.
974. 林鸿，卫星，闵春华，李增耀，何雅玲，陶文铨（2008）. PEMFC的两种三维两相非等温数值计算的对比. 《工程热物理学报》.
975. 吴学红，李增耀，马良栋，陶文铨（2008）. 一种求解对流扩散问题的高精度无网格方法. 《工程热物理学报》.
976. 冀文涛，张定才，冯楠，陶文铨（2008）. 水平管外含油及纯R134a池沸腾换热特性比较. 《工程热物理学报》.
977. 杨茉，周方，赵婷，侯野，卢玫，陶文铨（2008）. 管内变密度流体流动与换热的充分发展及解析解. 《工程热物理学报》.
978. 孙杰，何雅玲，李印实，陶文铨（2008）. 固体表面不同微观形貌对冷凝过程的影响. 《工程热物理学报》.
979. 李临平，吴志根，李增耀，何雅玲，陶文铨（2008）. 粘土空心砖结构优化的数值模拟. 《工程热物理学报》.
980. 赵婷，杨茉，卢玫，单彦广，余敏，陶文铨（2008）. 自然对流的LB方法模拟及其非线性特性. 《工程热物理学报》.
981. Tao Wenquan (2008). Three-Dimensional Numerical Simulation of Polymer Electrolyte Membrane Fuel Cells. Xi'an Jiaotong Daxue xuebao.
982. Jianfei Zhang, Bin Li, Wen-Jiang Huang, Yonggang Lei, Ya‐Ling He, Wen‐Quan Tao (2008). Experimental performance comparison of shell-side heat transfer for shell-and-tube heat exchangers with middle-overlapped helical baffles and segmental baffles. Chemical Engineering Science.DOI
983. Huajun Zhang, Lan Dai, Guoquan Xu, Yong Li, Wei Chen, Wen‐Quan Tao (2008). Studies of air-flow and temperature fields inside a passenger compartment for improving thermal comfort and saving energy. Part I: Test/numerical model and validation. Applied Thermal Engineering.DOI
984. Huajun Zhang, Lan Dai, Guoquan Xu, Yong Li, Wei Chen, Wen‐Quan Tao (2008). Studies of air-flow and temperature fields inside a passenger compartment for improving thermal comfort and saving energy. Part II: Simulation results and discussion. Applied Thermal Engineering.DOI
985. Yuling Lü, W.H. Zhang, Peng Yuan, M.D. Xue, Zhiguo Qu, Wen‐Quan Tao (2008). Experimental study of heat transfer intensification by using a novel combined shelf in food refrigerated display cabinets (Experimental study of a novel cabinets). Applied Thermal Engineering.DOI
986. Jie Fan, Wancheng Ding, J.F. Zhang, Y.L. He, Wen‐Quan Tao (2008). A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving. International Journal of Heat and Mass Transfer.DOI
987. Jiangbo Wu, Wen‐Quan Tao (2008). Numerical study on laminar convection heat transfer in a channel with longitudinal vortex generator. Part B: Parametric study of major influence factors. International Journal of Heat and Mass Transfer.DOI
988. Z.G. Wu, Jing Zhang, Yu Tao, Y.L. He, Wen‐Quan Tao (2008). Application of artificial neural network method for performance prediction of a gas cooler in a CO2 heat pump. International Journal of Heat and Mass Transfer.DOI
989. L.P. Li, Zhaolong Wu, Z.Y. Li, Ya‐Ling He, Wen‐Quan Tao (2008). Numerical thermal optimization of the configuration of multi-holed clay bricks used for constructing building walls by the finite volume method. International Journal of Heat and Mass Transfer.DOI
990. Xiaolong Xie, Zhao-Jun Liu, Y.L. He, Wen‐Quan Tao (2008). Numerical study of laminar heat transfer and pressure drop characteristics in a water-cooled minichannel heat sink. Applied Thermal Engineering.DOI
991. Peng Ding, Wen‐Quan Tao (2008). Estimation of Unknown Boundary Heat Flux in Laminar Circular Pipe Flow Using Functional Optimization Approach: Effects of Reynolds Number. ASME Journal of Heat and Mass Transfer.DOI
992. Li-Ting Tian, Ya‐Ling He, Yonggang Lei, Wen‐Quan Tao (2008). Numerical study of fluid flow and heat transfer in a flat-plate channel with longitudinal vortex generators by applying field synergy principle analysis. International Communications in Heat and Mass Transfer.DOI
993. G.H. Tang, X.F. Li, Yingli He, Wen‐Quan Tao (2008). Electroosmotic flow of non-Newtonian fluid in microchannels. Journal of Non-Newtonian Fluid Mechanics.DOI
994. Chao Shen, Ya‐Ling He, Yingwen Liu, Wen‐Quan Tao (2008). Modelling and simulation of solar radiation data processing with Simulink. Simulation Modelling Practice and Theory.DOI
995. Peng Ding, Xuehong Wu, Ya‐Ling He, Wen‐Quan Tao (2008). A Fast and Efficient Method for Predicting Fluid Flow and Heat Transfer Problems. ASME Journal of Heat and Mass Transfer.DOI
996. Bin Li, Wen‐Quan Tao, Ya‐Ling He (2008). Study on forced air convection cooling for electronic assemblies. Frontiers of Energy and Power Engineering in China.DOI
997. Weiwei Jin, Wen‐Quan Tao, Yinnian He, Ze Li (2008). Analysis of Inconsistency of SIMPLE-like Algorithms and an Entirely Consistent Update Technique—The CUT Algorithm. Numerical Heat Transfer Part B Fundamentals.DOI
998. L.P. Li, Zhaolong Wu, Ya‐Ling He, Guy Lauriat, Wen‐Quan Tao (2008). Optimization of the configuration of 290×140×90 hollow clay bricks with 3-D numerical simulation by finite volume method. Energy and Buildings.DOI
999. Ya‐Ling He, Yubing Tao, Wen‐Quan Tao (2008). Numerical study on the performance of wavy fin heat exchangers with different elliptic tube patterns. Progress in Computational Fluid Dynamics An International Journal.DOI
1000. Wen‐Quan Tao, Ya‐Ling He, G.H. Tang, Zhuo Li (2008). No New Physics in Single-Phase Fluid Flow and Heat Transfer in Mini- and Micro-Channels: Is It a Conclusion? ASME 2008 First International Conference on Micro/Nanoscale Heat Transfer, Parts A and B.DOI
1001. Z.G. Wu, Zhiguo Qu, Ya Ling He, Wen‐Quan Tao (2008). A comprehensive performance comparison for segregated algorithms of flow and heat transfer in complicated geometries. Progress in Computational Fluid Dynamics An International Journal.DOI
1002. Zhixin Sun, Zeng-Yao Li, Ya‐Ling He, Wen‐Quan Tao (2008). Coupled FVM-DSMC Simulation of Micro-Nozzle With Unstructured-Grid. ASME International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM).DOI
1003. Jie Sun, Ya‐Ling He, Yinshi Li, Wen‐Quan Tao (2008). A Molecular Dynamics Study on Obstructed Flow Around Single and Two Paratactic Circular Cylinders. ASME International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM).DOI
1004. Wenjing Ding, Liang Gong, Ya‐Ling He, Wen-Quan Tao (2008). Three-dimensional numerical simulation of the basic pulse tube refrigerator. Frontiers of Energy and Power Engineering in China.DOI
1005. 何雅玲，陶文铨（2007）. 对我国热工基础课程发展的一些思考. 《中国大学教学》, No. 3.下载原文
1006. 闵春华，林鸿，缑志斌，李增耀，何雅玲，陶文铨（2007）. 阴极不同进气对PEMFC性能影响的实验研究. 《工程热物理学报》.
1007. 陶于兵，何雅玲，唐连伟，陶文铨（2007）. 管翅式换热器管路布置优化设计的数值研究. 《化工进展》.
1008. 张定才，王凯，何雅玲，陶文铨（2007）. R134a在水平双侧强化管外沸腾换热. 《化工学报》.
1009. 李斌，陶文铨，何雅玲（2007）. 螺旋折流板换热器螺距计算的通用公式. 《化工学报》.
1010. 李印实，何雅玲，孙杰，陶文铨（2007）. 纳米尺度并列双圆柱绕流的分子动力学模拟研究. 《西安交通大学学报》.
1011. 丁鹏，陶文铨（2007）. 一种预测流动和传热问题的快速算法. 《西安交通大学学报》.
1012. 李卓，唐桂华，陶文铨（2007）. 微通道中极性流体流动特性的研究. 《西安交通大学学报》.
1013. 马良栋，李增耀，陶文铨（2007）. 具有截面自然对流通道内湍流换热的直接数值模拟. 《西安交通大学学报》.
1014. 孙杰，何雅玲，李印实，陶文铨（2007）. 外力场对冷凝过程影响的分子动力学模拟研究. 《工程热物理学报》.
1015. 黄文江，张剑飞，陶文铨（2007）. 弓形折流板换热器中折流板对换热器性能的影响. 《工程热物理学报》.
1016. 姜炜，卫星，何雅玲，唐桂华，陶文铨（2007）. 工作角度对燃料电池性能影响的实验研究. 《工程热物理学报》.
1017. 张剑飞，李欣，吴扬，何雅玲，陶文铨（2007）. 螺旋折流板换热器层流流动与换热的数值模拟. 《工程热物理学报》.
1018. 马良栋，李增耀，陶文铨（2007）. 高精度有限差分在湍流直接数值模拟中的应用. 《工程热物理学报》.
1019. 李印实，何雅玲，孙杰，陶文铨（2007）. 纳米尺度圆柱绕流现象的分子动力学模拟研究. 《工程热物理学报》.
1020. 孙东亮，陶文铨（2007）. 高密度和高粘度比率下气液两相流动的数值模拟. 《工程热物理学报》.
1021. 金巍巍，孙东亮，陶文铨，何雅玲（2007）. Krylov子空间法在SIMPLER算法中的求解性能分析. 《工程热物理学报》.
1022. 杨卫卫，何雅玲，黄竞，赵春凤，陶文铨（2007）. 多孔材料强化管内对流换热的数值研究. 《工程热物理学报》.
1023. 孙杰，何雅玲，李印实，陶文铨（2007）. 膜状冷凝初期过程的分子动力学模拟研究. 《西安交通大学学报》.
1024. Xuehong Wu, Shengping Shen, Tao Wenquan (2007). Meshless Local Petrov-Galerkin Collocation Method for Two-dimensional Heat Conduction Problems.DOI
1025. Tao Wenquan (2007). Numerical study on optimization design of circuit arrangement for tube-fin heat exchanger. Huagong jinzhan.
1026. Xuehong Wu, Wen‐Quan Tao (2007). Meshless method based on the local weak-forms for steady-state heat conduction problems. International Journal of Heat and Mass Transfer.DOI
1027. Yuetao Shi, Fengzhong Sun, Wen‐Quan Tao (2007). An experimental study of gas–solid flow around helically finned tube. Applied Thermal Engineering.DOI
1028. Xiaolong Xie, Yi He, Wen‐Quan Tao, Hong Wu Yang (2007). An experimental investigation on a novel high-performance integrated heat pipe–heat sink for high-flux chip cooling. Applied Thermal Engineering.DOI
1029. J M Wu, Wen‐Quan Tao (2007). Numerical study on laminar convection heat transfer in a rectangular channel with longitudinal vortex generator. Part A: Verification of field synergy principle. International Journal of Heat and Mass Transfer.DOI
1030. Zhuo Li, Ya‐Ling He, G.H. Tang, Wen‐Quan Tao (2007). Experimental and numerical studies of liquid flow and heat transfer in microtubes. International Journal of Heat and Mass Transfer.DOI
1031. Liang-Dong Ma, Zeng-Yao Li, Wen‐Quan Tao (2007). Direct numerical simulation of turbulent flow and heat transfer in a square duct with natural convection. Heat and Mass Transfer.DOI
1032. J M Wu, Wen‐Quan Tao (2007). Investigation on laminar convection heat transfer in fin-and-tube heat exchanger in aligned arrangement with longitudinal vortex generator from the viewpoint of field synergy principle. Applied Thermal Engineering.DOI
1033. Wen‐Quan Tao, Yongpan Cheng, T. S. Lee (2007). 3D numerical simulation on fluid flow and heat transfer characteristics in multistage heat exchanger with slit fins. Heat and Mass Transfer.DOI
1034. Wen‐Quan Tao, Junmei Wu (2007). Numerical investigation and analysis of heat transfer enhancement in channel by longitudinal vortex based on field synergy principle. Frontiers of Energy and Power Engineering in China.DOI
1035. Defeng Sun, Zhiguo Qu, Yinnian He, Wen‐Quan Tao (2007). An Efficient Segregated Algorithm for Incompressible Fluid Flow and Heat Transfer Problems—IDEAL (Inner Doubly Iterative Efficient Algorithm for Linked Equations) Part I: Mathematical Formulation and Solution Procedure. Numerical Heat Transfer Part B Fundamentals.DOI
1036. C.H. Min, Wen‐Quan Tao (2007). An under‐relaxation factor control method for accelerating the iteration convergence of flow field simulation. Engineering Computations.DOI
1037. H. W. Zhang, Y. L. He, Wen‐Quan Tao (2007). Numerical Study of Film and Regenerative Cooling in a Thrust Chamber at High Pressure. Numerical Heat Transfer Part A Applications.DOI
1038. Liang Gong, Zeng-Yao Li, Ya‐Ling He, Wen‐Quan Tao (2007). Discussion on Numerical Treatment of Periodic Boundary Condition for Temperature. Numerical Heat Transfer Part B Fundamentals.DOI
1039. Wen‐Quan Tao, Yongpan Cheng, T. S. Lee (2007). The Influence of Strip Location on the Pressure Drop and Heat Transfer Performance of a Slotted Fin. Numerical Heat Transfer Part A Applications.DOI
1040. Weiwei Jin, Wen‐Quan Tao (2007). Design of High-Order Difference Scheme and Analysis of Solution Characteristics—Part I: General Formulation of High-Order Difference Schemes and Analysis of Convective Stability. Numerical Heat Transfer Part B Fundamentals.DOI
1041. Junmei Wu, Wen‐Quan Tao (2007). Numerical analysis on heat transfer enhancement by longitudinal vortex based on field synergy principle. Frontiers of Energy and Power Engineering in China.DOI
1042. G.H. Tang, Wen‐Quan Tao, Ya‐Ling He (2007). SIMULATING TWO- AND THREE-DIMENSIONAL MICROFLOWS BY THE LATTICE BOLTZMANN METHOD WITH KINETIC BOUNDARY CONDITIONS. International Journal of Modern Physics C.DOI
1043. Yu Tao, Y.L. He, Zhen Guo Wu, Wen‐Quan Tao (2007). Three-dimensional numerical study and field synergy principle analysis of wavy fin heat exchangers with elliptic tubes. International Journal of Heat and Fluid Flow.DOI
1044. Yongpan Cheng, T. S. Lee, H. T. Low, Wen‐Quan Tao (2007). Improvement of SIMPLER Algorithm for Incompressible Flow on Collocated Grid System. Numerical Heat Transfer Part B Fundamentals.DOI
1045. G.H. Tang, Y.L. He, Wen‐Quan Tao (2007). COMPARISON OF GAS SLIP MODELS WITH SOLUTIONS OF LINEARIZED BOLTZMANN EQUATION AND DIRECT SIMULATION OF MONTE CARLO METHOD. International Journal of Modern Physics C.DOI
1046. Z.G. Wu, J. Z. Zhang, Juntao Zhou, Wen‐Quan Tao (2007). A Simple and Effective Method for Enhancing Iteration Convergence of Incompressible Fluid Flow and Heat Transfer Simulations: Lagrange Interpolation for Initial Field. Numerical Heat Transfer Part B Fundamentals.DOI
1047. Yong Wang, Ying He, Tianshou S. Zhao, G.H. Tang, Wen-Quan Tao (2007). IMPLICIT-EXPLICIT FINITE-DIFFERENCE LATTICE BOLTZMANN METHOD FOR COMPRESSIBLE FLOWS. International Journal of Modern Physics C.DOI
1048. Qing Li, Ya‐Ling He, Yong Wang, Wen-Quan Tao (2007). Coupled double-distribution-function lattice Boltzmann method for the compressible Navier-Stokes equations. Physical Review E.DOI
1049. Yanli Lv, Wenhui Zhang, Yi Gong, Wen-Quan Tao (2007). Numerical Simulation of Refrigerated Display Cabinets. International Conference on Bio-Inspired Computing: Theories and Applications (BIC-TA).DOI
1050. Ding-Cai Zhang, Wen‐Tao Ji, Wen-Quan Tao (2007). Condensation heat transfer of HFC134a on horizontal low thermal conductivity tubes. International Communications in Heat and Mass Transfer.DOI
1051. 孙杰，何雅玲，李印实，陶文铨（2006）. 温度对Lennard-Jones流体凝结过程影响的研究. 《西安交通大学学报》.
1052. 赵春凤，何雅玲，丁文静，杨卫卫，陶文铨（2006）. 渐缩型锥形脉管制冷机的二维数值研究. 《工程热物理学报》.
1053. 唐桂华，何雅玲，陶文铨（2006）. 粗糙度与气体稀薄性对微尺度流动特性的影响. 《工程热物理学报》.
1054. 王勇，何雅玲，唐桂华，陶文铨（2006）. 二维管道内交变流动的格子-Boltzmann方法模拟研究. 《西安交通大学学报》.
1055. 武俊梅，陶文铨（2006）. 纵向涡强化换热的数值研究及场协同原理分析. 《西安交通大学学报》.
1056. 吕彦力，孙启鹏，陶文铨，徐斌（2006）. 旁路流对换热器壳侧气液两相流动特性的影响. 《河南科技大学学报(自然科学版)》.
1057. 谭雅巍，姜炜，李增耀，何雅玲，陶文铨（2006）. 流道结构和几何尺寸对燃料电池性能影响的实验研究. 《工程热物理学报》.
1058. 张定才，何雅玲，刘启斌，陶文铨（2006）. 内螺旋肋管流动与传热特性的实验研究. 《工程热物理学报》.
1059. 丁文静，何雅玲，陶文铨（2006）. 基本型脉管制冷机的全三维数值模拟计算. 《工程热物理学报》.
1060. 张宏伟，陶文铨，何雅玲，丰镇平（2006）. 液体火箭发动机燃烧室液膜冷却数值研究. 《西安交通大学学报》.
1061. 孙东亮，陶文铨，王良璧（2006）. 涡强化扁管管片散热器传热特性及场协同原理分析. 《工程热物理学报》.
1062. 曾敏，石磊，陶文铨（2006）. 波纹管管内层流流动和换热规律的实验研究及数值模拟. 《工程热物理学报》.
1063. 李卓，吕嘉喜，何雅玲，陶文铨（2006）. 微圆管内液体流动与换热特性的实验研究. 《工程热物理学报》.
1064. 武俊梅，陶文铨（2006）. 纵向涡强化通道内换热的数值研究及机理分析. 《西安交通大学学报》.
1065. 李印实，何雅玲，孙杰，陶文铨（2006）. 不同水分子模型凝结系数的分子动力学模拟对比研究. 《西安交通大学学报》.
1066. 史月涛，韩志航，孙奉仲，陶文铨（2006）. 螺旋翅片管防磨和防积灰特性的试验研究. 《动力工程学报》.
1067. 刘启斌，何雅玲，张定才，陶文铨（2006）. R123在水平双侧强化管外池沸腾换热. 《化工学报》.
1068. Tao Wenquan (2006). Boiling heat transfer of R123 outside single horizontal doubly-enhanced tubes. Journal of Chemical Industry and Engineering.
1069. Yu Tao, Y.L. He, Jun Huang, Z.G. Wu, Wen‐Quan Tao (2006). Three-dimensional numerical study of wavy fin-and-tube heat exchangers and field synergy principle analysis. International Journal of Heat and Mass Transfer.DOI
1070. Y.B. Tao, Y.L. He, Jun Huang, Z.G. Wu, Wen‐Quan Tao (2006). Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-and-tube heat exchangers. International Journal of Thermal Sciences.DOI
1071. Zhuo Li, Wen‐Quan Tao, Ya‐Ling He (2006). A numerical study of laminar convective heat transfer in microchannel with non-circular cross-section. International Journal of Thermal Sciences.DOI
1072. Bin Li, Bo Feng, Ya‐Ling He, Wen‐Quan Tao (2006). Experimental study on friction factor and numerical simulation on flow and heat transfer in an alternating elliptical axis tube. Applied Thermal Engineering.DOI
1073. Wen‐Quan Tao, Y. W. Tan, Weiwei Jiang, Ze Li, Y.L. He (2006). EFFECTS OF FLOW FIELD CONFIGURATION OF POLAR PLATES ON PEM FUEL CELL PERFORMANCE. Energy.DOI
1074. J. M. Wu, Wen‐Quan Tao (2006). Numerical Computation of Laminar Natural Convection Heat Transfer around a Horizontal Compound Tube with External Longitudinal Fins. Heat Transfer Engineering.DOI
1075. Liang-Dong Ma, Zeng-Yao Li, Wen‐Quan Tao (2006). Experimental verification of the field synergy principle. International Communications in Heat and Mass Transfer.DOI
1076. Zhiguo Qu, Wen‐Quan Tao, Yinnian He (2006). An Improved Numerical Scheme for the SIMPLER Method on NonOrthogonal Curvilinear Coordinates: SIMPLERM. Numerical Heat Transfer Part B Fundamentals.DOI
1077. Zhiguo Qu, Yinnian He, C. Y. Zhao, Wen‐Quan Tao (2006). Implementation of CLEAR algorithm on non‐orthogonal curvilinear co‐ordinates for solution of incompressible flow and heat transfer. International Journal for Numerical Methods in Fluids.DOI
1078. Wen‐Quan Tao, Weiwei Jin, Y.L. He, Zhiguo Qu, C. C. Zhang (2006). Optimum Design of Two-Row Slotted Fin Surface with X-Shape Strip Arrangement Positioned by “Front Coarse and Rear Dense” Princple, Part I: Physical/Mathematical Models and Numerical Methods. Numerical Heat Transfer Part A Applications.DOI
1079. Weiwei Jin, Y.L. He, Zhiguo Qu, C. C. Zhang, Wen‐Quan Tao (2006). Optimum Design of Two-Row Slotted Fin Surface with X-Shape Strip Arrangement Positioned by “Front Coarse and Rear Dense” Principle, Part II: Results and Discussion. Numerical Heat Transfer Part A Applications.DOI
1080. Wen‐Quan Tao, C.H. Min, X.L. Liu, Y.L. He, B.H. Yin, Wei Jiang (2006). Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Journal of Power Sources.DOI
1081. Zhuo Li, G.H. Tang, Ya‐Ling He, Wen‐Quan Tao (2006). Numerical Investigation of EDL Effects on the Flow Characters of Polar Fluids in Rectangular Microchannels. ASME International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM).DOI
1082. Jin‐Jia Wei, Bo Yu, Wen-Quan Tao, Yasuo Kawaguchi (2006). A New General Convective Boundedness Criterion. Numerical Heat Transfer Part B Fundamentals.DOI
1083. Yong Wang, Ya‐Ling He, G.H. Tang, Wen-Quan Tao (2006). SIMULATION OF TWO-DIMENSIONAL OSCILLATING FLOW USING THE LATTICE BOLTZMANN METHOD. International Journal of Modern Physics C.DOI
1084. 张定才，刘启斌，陶文铨，何雅玲（2005）. R22在水平双侧强化管外的凝结换热. 《化工学报》.
1085. 徐明海，陶文铨（2005）. 一种求解不可压N-S方程的非结构化网格方法. 《西安交通大学学报》.
1086. 周靖，陶文铨（2005）. 用直接模拟Monte Carlo方法计算微通道的流动与换热. 《西安交通大学学报》.
1087. 李惠珍，屈治国，程永攀，陶文铨（2005）. 开缝翅片流动和传热性能的实验研究及数值模拟. 《西安交通大学学报》.
1088. 李光熙，陶文铨，李增耀，宇波（2005）. 旋转对平板通道内湍流流动和换热影响的直接模拟. 《西安交通大学学报》.
1089. 马良栋，李增耀，陶文铨（2005）. 稳定性可保证二阶格式在多重网格中的有效性和经济性. 《西安交通大学学报》.
1090. 金巍巍，陶文铨，何雅玲（2005）. 代数方程求解方法收敛速度比较及对算法健壮性的影响. 《西安交通大学学报》.
1091. 王贤钢，俞茂铮，陶文铨（2005）. 一种稳定性与精度协调一致的二阶差分格式. 《西安交通大学学报》.
1092. 史月涛，孙奉仲，刘杰，韩志航，陶文铨（2005）. 气固两相流绕流螺旋翅片管的实验研究. 《西安交通大学学报》.
1093. 屈治国，何雅玲，陶文铨（2005）. 求解流动和传热问题的一种新的全隐算法-CLEAR(下). 《工程热物理学报》.
1094. 张伟，高亚甫，何雅玲，张宏伟，陶文铨（2005）. 超临界状态下液膜冷却的初步研究. 《中国动力工程学会第三届青年学术年会》.
1095. 谢公南，王秋旺，陶文铨（2005）. 环形通道内层流入口段换热及流体变物性的影响. 《化工学报》.
1096. 王秋旺，罗来勤，曾敏，王良，陶文铨，黄彦平（2005）. 交错螺旋折流板管壳式换热器壳侧传热与阻力性能. 《化工学报》.
1097. 何雅玲，唐连伟，高健，陶文铨（2005）. 一种新型车用柴油机中冷器的热力计算方法及分析. 《内燃机学报》.
1098. 屈治国，何雅玲，陶文铨（2005）. 求解流动和传热问题的一种新的全隐算法-CLEAR(上). 《工程热物理学报》.
1099. 李欣，邓斌，陶文铨（2005）. 翅片管束式管壳式换热器三维数值模拟研究. 《工程热物理学报》.
1100. 张伟，高亚甫，何雅玲，张宏伟，陶文铨（2005）. 超临界燃气热物性计算及分析. 《中国动力工程学会第三届青年学术年会》.
1101. 何雅玲，杨卫卫，赵春凤，陶文铨（2005）. 脉动流动强化换热的数值研究. 《工程热物理学报》.
1102. 贺群武，王秋旺，罗来勤，陶文铨（2005）. 子网格在DSMC中的作用及三角形子网格. 《工程热物理学报》.
1103. 周宇，李惠珍，陶文铨（2005）. 百叶窗翅片的传热与阻力特性的数值模拟. 《中国动力工程学会第三届青年学术年会》.
1104. Tao Wenquan (2005). Performance Evaluation of an Inter-Cooler for Turbo-Charger System of Internal Combustion Engine. Transactions of Csice.
1105. Tao Wenquan (2005). Experimental research on boiling heat transfer performance of alternative medium HCFC123 outside tube. Journal of North China Electric Power University.
1106. Tao Wenquan (2005). Laminar heat transfer inside concentric annular duct in en trance region and effects of variable fluid properties. Journal of Chemical Industry and Engineering.
1107. Huixiong Zhang, Wen‐Quan Tao, Y.L. He, Wanyu ZHANG (2005). Numerical study of liquid film cooling in a rocket combustion chamber. International Journal of Heat and Mass Transfer.DOI
1108. Wen‐Quan Tao, Ya‐Ling He, Z.Y. Li, Zhiguo Qu (2005). Some recent advances in finite volume approach and their applications in the study of heat transfer enhancement. International Journal of Thermal Sciences.DOI
1109. Zeng-Yuan Guo, Wen‐Quan Tao, R. K. Shah (2005). The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer. International Journal of Heat and Mass Transfer.DOI
1110. Junjie Zhou, Wen‐Quan Tao (2005). Three dimensional numerical simulation and analysis of the airside performance of slotted fin surfaces with radial strips. Engineering Computations.DOI
1111. G.H. Tang, Wen‐Quan Tao, Ya‐Ling He (2005). Gas slippage effect on microscale porous flow using the lattice Boltzmann method. Physical Review E.DOI
1112. Xunliang Liu, Wen‐Quan Tao, Zeng-Yao Li, Ya‐Ling He (2005). Three-dimensional transport model of PEM fuel cell with straight flow channels. Journal of Power Sources.DOI
1113. Y.L. He, Weibo Yang, Wen‐Quan Tao (2005). Three-Dimensional Numerical Study of Natural Convective Heat Transfer of Liquid in a Cubic Enclosure. Numerical Heat Transfer Part A Applications.DOI
1114. Y.L. He, Wen‐Quan Tao, F.Q. Song, Wei Zhang (2005). Three-dimensional numerical study of heat transfer characteristics of plain plate fin-and-tube heat exchangers from view point of field synergy principle. International Journal of Heat and Fluid Flow.DOI
1115. Hao Wu, Y.L. He, G.H. Tang, Wen‐Quan Tao (2005). Lattice Boltzmann simulation of flow in porous media on non-uniform grids. Progress in Computational Fluid Dynamics An International Journal.DOI
1116. W.J. Ding, Y.L. He, Wen‐Quan Tao (2005). Three dimensional numerical computation of the flow field in a pulse tube. Elsevier eBooks.DOI
1117. W.J. Ding, Peixuan Huang, Y.L. He, Y.W. Liu, Wen‐Quan Tao (2005). Factors influencing the lowest refrigerating temperature of the miniature co-axial pulse tube refrigerator. Heat Transfer-Asian Research.DOI
1118. G.H. Tang, Wen-Quan Tao, Y. L. He (2005). Thermal boundary condition for the thermal lattice Boltzmann equation. Physical Review E.DOI
1119. G.H. Tang, Wen-Quan Tao, Ya‐Ling He (2005). Three-dimensional lattice Boltzmann model for gaseous flow in rectangular microducts and microscale porous media. Journal of Applied Physics.DOI
1120. 贺群武，王秋旺，罗来勤，陶文铨（2004）. 压力边界条件下微通道内气体流动换热特性研究. 《工程热物理学报》.
1121. 邓斌，吴扬，陶文铨（2004）. 螺旋折流板换热器壳侧流动的数值模拟. 《西安交通大学学报》.
1122. 杨卫卫，何雅玲，陶文铨，赵春凤（2004）. 凹槽通道中脉动流动强化传质的数值研究. 《西安交通大学学报》.
1123. 邓斌，陶文铨（2004）. 管壳式换热器壳侧湍流流动与换热的三维数值模拟. 《化工学报》.
1124. 杨卫卫，何雅玲，徐超，陶文铨（2004）. 平直通道中层流脉动流动的数值模拟. 《西安交通大学学报》.
1125. 武俊梅，陶文铨（2004）. 具有纵向外肋片的水平复合管外表面自然对流换热的数值计算. 《工程热物理学报》.
1126. 刘训良，齐志鹏，谭雅巍，何雅玲，陶文铨（2004）. PEMFC插指型流道阴极中气体扩散特性的数值分析. 《工程热物理学报》.
1127. 邓斌，李欣，陶文铨（2004）. 多孔介质模型在管壳式换热器数值模拟中的应用. 《工程热物理学报》.
1128. 李光熙，陶文铨，宇波，李增耀（2004）. 平板通道内充分发展湍流直接数值模拟. 《工程热物理学报》.
1129. 张东升，李增耀，陶文铨，王秋旺（2004）. 对流项离散格式的对比与讨论. 《工程热物理学报》.
1130. 杨卫卫，何雅玲，徐超，陶文铨（2004）. 二维方腔非稳态自然对流数值模拟研究. 《工程热物理学报》.
1131. 修荣荣，徐明海，黄善波，陶文铨（2004）. 网格单元形状对数值计算的影响. 《工程热物理学报》.
1132. 何雅玲，陶文铨，吴明，刘迎文（2004）. 脉管制冷机性能数值模拟方法的研究进展及发展方向. 《工程热物理学报》.
1133. 丁文静，何雅玲，陶文铨（2004）. 基于脉管制冷机的二维可压缩流动数值计算程序的开发与应用. 《工程热物理学报》.
1134. 黄鹏波，丁文静，刘迎文，何雅玲，陶文铨（2004）. 微型同轴脉管制冷机最低制冷温度影响因素的实验研究. 《工程热物理学报》.
1135. 彭波涛，罗来勤，王秋旺，邓斌，罗行，陶文铨（2004）. 多股流板翅式换热器的微分与优化数值研究. 《化工学报》.
1136. 徐超，何雅玲，杨卫卫，陶文铨（2004）. 流体静态和动态平衡性质的分子动力学模拟. 《工程热物理学报》.
1137. 唐桂华，陶文铨，何雅玲，王秋旺（2004）. 微细管内气体流动特性实验研究及影响因素分析. 《工程热物理学报》.
1138. HE Ya-Ling, Ding Wen‐Jing, Tao Wenquan (2004). The effect of tube wall heat conduction on the natural convection in a long cylindrical envelope with an adiabatic lateral surface. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
1139. Y.L. He, Wen‐Quan Tao, Zhiguo Qu, Z.Q Chen (2004). Steady natural convection in a vertical cylindrical envelope with adiabatic lateral wall. International Journal of Heat and Mass Transfer.DOI
1140. Yu Bo, Wen‐Quan Tao (2004). Pressure drop and heat transfer characteristics of turbulent flow in annular tubes with internal wave-like longitudinal fins. Heat and Mass Transfer.DOI
1141. Zhiguo Qu, Wen‐Quan Tao, Y.L. He (2004). Three-Dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-Arrangement of Strips. ASME Journal of Heat and Mass Transfer.DOI
1142. J. H. Nie, Bassem F. Armaly, Wen‐Quan Tao, Qiuwang Wang (2004). Three-Dimensional Turbulent Flow in the Exit Head Section of a Heat Exchanger. Journal of Fluids Engineering.DOI
1143. G. X. Li, Wen‐Quan Tao, Ze Li, Boyang Yu (2004). Turbulent Statistics of Rarefield Flows in Microchannel Flow and Heat Transfer. ASME International Conference on Microchannels and Minichannels (ICMM).DOI
1144. Ya‐Ling He, Weiwei Yang, Wen‐Quan Tao (2004). THREE DIMENSIONAL NUMERICAL STUDY OF NATURAL CONVECTIVE HEAT TRANSFER OF LIQUID FOR TWO HEATERS INSTALLED IN A CUBIC ENCLOSURE.DOI
1145. 陶文铨，何雅玲（2003）. 关于编写传热学和工程热力学教材的浅见. 《中国大学教学》, No. 10.下载原文
1146. 何雅玲，陶文铨（2003）. 关于建设大机械类专业的探讨. 《中国大学教学》, No. 3.下载原文
1147. 王秋旺，屈治国，李惠珍，林梅，陶文铨（2003）. 空气横掠波纹管束的流动与传热性能. 《化工学报》.
1148. 武俊梅，黄翔，陶文铨（2003）. 单元式直接蒸发冷却空调机的优化设计. 《流体机械》.
1149. 李光熙，陶文铨，孙晓娟（2003）. 非典型肺炎病毒在空气中传播过程的初步数值模拟. 《西安交通大学学报》.
1150. 王娴，王秋旺，陶文铨，傅游，康继昌（2003）. 直接模拟蒙特卡罗方法的并行方案设计. 《西安交通大学学报》.
1151. 屈治国，何雅玲，陶文铨（2003）. 平直开缝翅片传热特性的三维数值模拟及场协同原理分析. 《工程热物理学报》.
1152. 何雅玲，黄鹏波，屈治国，陶文铨（2003）. 场协同理论在交变流动缝隙式回热器中的数值验证. 《工程热物理学报》.
1153. 王秋旺，王娴，陶文铨，郑平（2003）. 稀薄气体二维外部柱体绕流特性研究. 《工程热物理学报》.
1154. 丁文静，何雅玲，陶文铨（2003）. 管壁导热对脉管内自然对流换热影响的研究. 《工程热物理学报》.
1155. 李明秀，陶文铨，何雅玲，王秋旺（2003）. 格子—BOLTZMANN方法非均分网格的实施. 《工程热物理学报》.
1156. 吴峰，王秋旺，罗来勤，陶文铨（2003）. 空气横掠波纹管束流动与传热性能的数值模拟. 《工程热物理学报》.
1157. 曾科，陶文铨，贾斗南，邱立青，王秋旺，段天元（2003）. HFETR燃料元件稳态三维流场和温度场数值模拟程序的研制和应用. 《核动力工程》.
1158. 邓斌，陶文铨（2003）. 管壳式换热器壳侧湍流流动的数值模拟及实验研究. 《西安交通大学学报》.
1159. 刘训良，陶文铨，何雅玲，郑平（2003）. 用于粘性流场计算的一种改进的模糊控制方法. 《西安交通大学学报》.
1160. 唐桂华，何雅玲，伍华荣，陶文铨（2003）. 二维平板通道中流动与传热的格子-Boltzmann模拟. 《工程热物理学报》.
1161. Hou Ping-li, Tao Wenquan, Yu Mao‐Zheng (2003). Refinement of the convective boundedness criterion of Gaskell and Lau. Engineering Computations.DOI
1162. Ya‐Ling He, Ming Wu, Wen‐Quan Tao, Zhongqi Chen (2003). Improvement of the thermal performance of pulse tube refrigerator by using a general principle for enhancing energy transport and conversion processes. Applied Thermal Engineering.DOI
1163. T. T. Wong, C.W. Leung, Ze Li, Wen‐Quan Tao (2003). Turbulent convection of air-cooled rectangular duct with surface-mounted cross-ribs. International Journal of Heat and Mass Transfer.DOI
1164. S. F. Shen, W. Liu, Wen‐Quan Tao (2003). Analysis of field synergy on natural convective heat transfer in porous media. International Communications in Heat and Mass Transfer.DOI
1165. Y.L. He, Wen‐Quan Tao, Tianshou S. Zhao, Z. Q. Chen (2003). STEADY NATURAL CONVECTION IN A TILTED LONG CYLINDRICAL ENVELOPE WITH LATERAL ADIABATIC SURFACE, PART 1: THEORETICAL MODELING AND NUMERICAL TREATMENTS. Numerical Heat Transfer Part A Applications.DOI
1166. Min Zeng, Wen‐Quan Tao (2003). A comparison study of the convergence characteristics and robustness for four variants of SIMPLE‐family at fine grids. Engineering Computations.DOI
1167. Z.X. Yuan, Wen‐Quan Tao, Xiaojun Terry Yan (2003). Experimental Study on Heat Transfer in Ducts with Winglet Disturbances. Heat Transfer Engineering.DOI
1168. Jinjia Wei, Bo Yu, Wen‐Quan Tao, Yasuo Kawaguchi, Hua Sheng Wang (2003). A NEW HIGH-ORDER-ACCURATE AND BOUNDED SCHEME FOR INCOMPRESSIBLE FLOW. Numerical Heat Transfer Part B Fundamentals.DOI
1169. G.H. Tang, Wen‐Quan Tao, Y. L. He (2003). Gas Flow Study in MEMS Using Lattice Boltzmann Method.DOI
1170. Qunwu He, Qiuwang Wang, Laiqin Luo, Wen‐Quan Tao, Hiroyuki Ozoe (2003). 304 Numerical study on the pressure drop and heat transfer characteristics of internally finned tubes with blocked inserted tubes. Keisan Rikigaku Koenkai koen ronbunshu/Keisan Rikigaku Kouenkai kouen rombunshuu.DOI
1171. G.H. Tang, Wen-Quan Tao, Y. L. HE (2003). SIMULATION OF FLUID FLOW AND HEAT TRANSFER IN A PLANE CHANNEL USING THE LATTICE BOLTZMANN METHOD. International Journal of Modern Physics B.DOI
1172. 王娴，王秋旺，陶文铨，郑平（2002）. 直接模拟蒙特卡罗方法在微通道流动模拟中的应用. 《工程热物理学报》.
1173. 吴明，何雅玲，陶文铨，李惠珍，陈钟颀（2002）. 场协同理论在脉管制冷机研究中的推广. 《工程热物理学报》.
1174. 何雅玲，吴明，陶文铨，陈钟颀（2002）. 不同倾角的脉管制冷机内自然对流影响的研究. 《工程热物理学报》.
1175. 李增耀，陶文铨，王秋旺（2002）. 多块网格中的块隐式方法. 《工程热物理学报》.
1176. 王娴，宋富强，屈治国，李明秀，王秋旺，陶文铨（2002）. 场协同理论在椭圆型流动中的数值验证. 《工程热物理学报》.
1177. 郭航，马重芳，陶文铨，张东升，焦安军，吴江涛（2002）. SI MPLE算法的一个新的改进方案. 《西安交通大学学报》.
1178. 曾敏，王秋旺，屈治国，柏巍，陶文铨（2002）. 波纹管内强制对流换热与阻力特性的实验研究. 《西安交通大学学报》.
1179. 吴明，何雅玲，陶文铨，陈钟颀，潘雁频，王小军（2002）. 最佳脉管长径比优化设计的理论分析及数值模拟. 《西安交通大学学报》.
1180. 徐明海，陶文铨（2002）. 二维各向异性非结构化网格的自动生成与应用. 《西安交通大学学报》.
1181. 张东升，王秋旺，陶文铨（2002）. 具有移动边界平行平板通道内的层流对流换热. 《西安交通大学学报》.
1182. 宋富强，屈治国，何雅玲，陶文铨（2002）. 低速下空气横掠翅片管换热规律的数值研究. 《西安交通大学学报》.
1183. 邓斌，T.T.Wong，陶文铨（2002）. 带交叉肋方形截面通道内强制对流换热的实验研究. 《西安交通大学学报》.
1184. 何雅玲，陶文铨（2002）. 场协同原理在强化换热与脉管制冷机性能改进中的应用(下). 《西安交通大学学报》.
1185. 陶文铨，何雅玲（2002）. 场协同原理在强化换热与脉管制冷机性能改进中的应用(上). 《西安交通大学学报》.
1186. 黄伟，张文其，陶文铨，何劲松，黄海，张富源，刘小兵（2002）. 蒸汽发生器下封头/主泵连接处流动特性试验研究. 《核动力工程》.
1187. Wen‐Quan Tao, Zeng-Yuan Guo, Bu‐Xuan Wang (2002). Field synergy principle for enhancing convective heat transfer––its extension and numerical verifications. International Journal of Heat and Mass Transfer.DOI
1188. Jinjia Wei, Bo Yu, Hua Sheng Wang, Wen‐Quan Tao (2002). Numerical study of simultaneous natural convection heat transfer from both surfaces of a uniformly heated thin plate with arbitrary inclination. Heat and Mass Transfer.DOI
1189. Z.Y. Li, T. C. Hung, Wen‐Quan Tao (2002). Numerical simulation of fully developed turbulent flow and heat transfer in annular-sector ducts. Heat and Mass Transfer.DOI
1190. Lingxue Wang, Qiuwang Wang, Y.L. He, Wen‐Quan Tao (2002). Experimental and numerical study of developing turbulent flow and heat transfer in convergent/divergent square ducts. Heat and Mass Transfer.DOI
1191. Xunliang Liu, Wen‐Quan Tao, Zheng Ping, Ya‐Ling He, Qiuwang Wang (2002). Control of convergence in a computational fluid dynamic simulation using fuzzy logic. Science China Technological Sciences.DOI
1192. Huang Jun, Qiuwang Wang, Wen‐Quan Tao (2002). Numerical simulation of turbulent flow and heat transfer in multi‐channel, narrow‐gap fuel element. Engineering Computations.DOI
1193. Meng Li, Wen‐Quan Tao, Qiuwang Wang, Ya‐Ling He (2002). Simulation of natural convection flow in a square cavity by lattice-Boltzmann method within a wide range of Ra. International Heat Transfer Conference (IHTC).DOI
1194. Ya‐Ling He, Ming Wu, Wen‐Quan Tao, Zhongqi Chen (2002). Improvements of pulse tube refrigerator revisited: application of field synergy principle. International Heat Transfer Conference (IHTC).DOI
1195. 胡延东，何雅玲，王秋旺，陶文铨，陈钟颀（2001）. 脉管制冷机内自然对流影响的数值分析. 《西安交通大学学报》.
1196. 成昌锐，王秋旺，刘星，陶文铨（2001）. R407C在水平单管外凝结换热的实验研究. 《工程热物理学报》.
1197. 杨小玉，王秋旺，徐佳莹，陶文铨（2001）. 周期性通道内非牛顿流体的流动与换热的实验研究. 《工程热物理学报》.
1198. 王良，罗来勤，王秋旺，曾敏，陶文铨（2001）. 螺旋折流板换热器中阻流板对换热及沿程压降的影响. 《工程热物理学报》.
1199. 刘星，王秋旺，陶文铨（2001）. 边界条件对对流扩散方程数值稳定性的影响. 《工程热物理学报》.
1200. 王良，王秋旺，胡延东，张毅，盖平原，徐明海，陶文铨（2001）. 超临界注汽油井中蒸汽参数的数值计算. 《工程热物理学报》.
1201. 李明秀，陶文铨，王秋旺（2001）. LATTICE-BOLTZMANN方法及其在顶盖驱动流数值模拟中的应用. 《工程热物理学报》.
1202. 成昌锐，胡延东，赵长颖，王秋旺，陶文铨（2001）. 导热泥强化传热作用的数值模拟. 《工程热物理学报》.
1203. 何雅玲，许名尧，高成名，陈钟颀，陶文铨（2001）. 变截面脉管制冷机的实验研究. 《西安交通大学学报》.
1204. 何雅玲，高成名，陈钟颀，陶文铨，吴明（2001）. 两种锥形脉管制冷机的数值模拟及其实验验证. 《工程热物理学报》.
1205. 陈民，李沛文，王秋旺，陶文铨（2001）. 非共沸混合工质管内流动凝结换热系数的分析与计算. 《化工学报》.
1206. HE Ya-Ling, Gao Chengming, Mingyao Xu, Chen Zhongqi, Tao Wenquan (2001). Numerical simulation of convergent and divergent tapered pulse tube cryocoolers and experimental verification. Cryogenics.DOI
1207. Liang-Bi Wang, Wen‐Quan Tao, Qiuwang Wang, T. T. Wong (2001). Experimental study of developing turbulent flow and heat transfer in ribbed convergent/divergent square ducts. International Journal of Heat and Fluid Flow.DOI
1208. Liang-Bi Wang, Wen‐Quan Tao, Qiuwang Wang, Ya‐Ling He (2001). Experimental and Numerical Study of Turbulent Heat Transfer in Twisted Square Ducts. ASME Journal of Heat and Mass Transfer.DOI
1209. 王秋旺，陶文铨，等（2000）. 从国外传热学教材谈起. 《中国大学教学》, No. 6.下载原文
1210. 宇波，王秋旺，陶文铨（2000）. 波纹内翅片管换热与阻力特性的实验研究. 《工程热物理学报》.
1211. 徐佳莹，马雅玲，杨小玉，陶文铨（2000）. 非牛顿流体在周期性渐扩渐缩通道内层流流动与换热的实验研究. 《工程热物理学报》.
1212. 唐桂华，庄正宁，王建伟，陶文铨（2000）. 不凝气体存在时水平单管外膜状凝结换热的数值研究. 《西安交通大学学报》.
1213. 聂建虎，李增耀，陶文铨，王秋旺（2000）. 周期性三对角阵方法与反复迭代法的比较. 《西安交通大学学报》.
1214. 聂建虎，陶文铨，王秋旺（2000）. 具有复杂结构的换热器出水管段内湍流的数值模拟. 《西安交通大学学报》.
1215. 聂建虎，李淑艳，王秋旺，陶文铨（2000）. 压缩机中冷器计算机辅助热力设计计算. 《压缩机技术》.
1216. 杨茉，崔晓钰，陶文铨，OZOE Hiroyuki（2000）. 低Prandtl数水平流体层自然对流的振荡和分歧. 《工程热物理学报》.
1217. Tao Wenquan (2000). EXPERIMENTAL STUDY ON LAMINAR FLOW AND HEAT TRANSFER OF NON-NEWTONIAN FLUID IN PERIODICALLY CONVERGING- DIVERGING CHANNEL. Journal of Engineering Thermophysics.
1218. Wen‐Quan Tao, Shu-Shen Lu, H. J. Kang, Mingjie Lin (2000). Experimental Study on Developing and Fully Developed Fluid Flow and Heat Transfer in Annular-Sector Ducts. Enhanced heat transfer/Journal of enhanced heat transfer.DOI
1219. 张华俊，陶文铨，冯倩莹，董晓俊，邹挺，赵爱国，邱传惠（1999）. 风冷热电空调器实验研究. 《流体机械》.
1220. 杨茉，李学恒，陶文铨，OZOEHiroyuki（1999）. QUICK与多种差分方案的比较和计算. 《工程热物理学报》.
1221. 徐明海，王秋旺，林梅，陶文铨（1999）. 方腔尺寸对封闭方腔内多块孤立平板自然对流换热影响的数值分析. 《工程热物理学报》.
1222. 张华俊，陶文铨，冯倩莹，陈浩，董晓俊，邹挺（1999）. 风冷热电空调器变工况实验研究. 《流体机械》.
1223. 陈民，王秋旺，陶文铨（1999）. R32/R134a混合工质水平管内流动凝结换热的实验研究. 《化工学报》.
1224. 苑中显，阎小军，王秋旺，陶文铨（1999）. 实际叶型前缘冲击冷却换热的液晶显示实验研究. 《西安交通大学学报》.
1225. Ben‐Wen Li, Jicheng He, Wen‐Quan Tao (1999). Six convective difference schemes on different grid systems for fluid flow and heat transfer with SIMPLE algorithm. Journal of Thermal Science.DOI
1226. Boyang Yu, J. H. Nie, Qiuwang Wang, Wen‐Quan Tao (1999). Experimental study on the pressure drop and heat transfer characteristics of tubes with internal wave-like longitudinal fins. Heat and Mass Transfer.DOI
1227. C. M. Ling, Qiuwang Wang, Wen‐Quan Tao, Hiroyuki Ozoe (1999). Experimental study on transient natural convection in a cube enclosure with an isolated vertical cyclically heated plate. Journal of Thermal Science.DOI
1228. Qiuwang Wang, Wen‐Quan Tao, Z. Lin, T.T. Chow (1999). An Experimental Investigation of Natural Convection in a Cubic Inclined Enclosure With Multiple Isolated Plates. ASME Journal of Heat and Mass Transfer.DOI
1229. Jiashuai Liu, Wen‐Quan Tao (1999). Bifurcation to oscillatory flow of the natural convection around a vertical channel in rectangular enclosure. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
1230. 宇波，王秋旺，林明杰，陶文铨（1998）. 一种非结构化同位网格算法. 《工程热物理学报》.
1231. 宇波，林明杰，徐佳莹，陶文铨（1998）. 纵向波纹内翅片管中层流充分发展对流换热的数值模拟. 《西安交通大学学报》.
1232. 李芳明，李沛文，李妩，陶文铨（1998）. 新工质 R134a 在水平强化管外的池沸腾换热. 《西安交通大学学报》.
1233. 苑中显，王秋旺，马重芳，陶文铨（1998）. 带间断性矩肋的平行平板通道中三维流动与换热的数值模拟. 《工程热物理学报》.
1234. 王秋旺，宇波，马雅玲，陶文铨（1998）. 倾斜封闭立方腔内多块孤立平板自然对流换热的实验研究. 《工程热物理学报》.
1235. Ming‐Jiu Ni, Wen‐Quan Tao, Shangjin Wang (1998). Stability-Controllable Second-order Difference scheme for convection term. Journal of Thermal Science.DOI
1236. Z.X. Yuan, Wen‐Quan Tao, Qiuwang Wang (1998). Numerical prediction for laminar forced convection heat transfer in parallel-plate channels with streamwise-periodic rod disturbances. International Journal for Numerical Methods in Fluids.DOI
1237. L.B. Wang, Gang Jiang, Wen‐Quan Tao, Hiroyuki Ozoe (1998). Numerical Simulation on Heat Transfer and Fluid Flow Characteristics of Arrays With Nonuniform Plate Length Positioned Obliquely to the Flow Direction. ASME Journal of Heat and Mass Transfer.DOI
1238. Z.X. Yuan, Wuqiang Wang, Wen‐Quan Tao (1998). Experimental Study of Enhanced Heat Transfer in Ducts With Periodic Rectangular Fins Along the Main Flow Direction. International Heat Transfer Conference (IHTC).DOI
1239. Qiuwang Wang, Wen‐Quan Tao (1998). Natural Convection in Square Enclosure with an Internal Isolated Horizontal Plate. International Journal of Fluid Mechanics Research.DOI
1240. 王良壁，陶文铨（1997）. 正四边形截面90°扭转通道发展段传热与阻力特性的研究. 《工程热物理学报》.
1241. 彭海涛，李芳明，李女武，陶文铨（1997）. R22饱和蒸气在水平双侧强化管外凝结换热的实验研究. 《西安交通大学学报》.
1242. 李沛文，陈民，陶文铨（1997）. R134a水平管内流动凝结换热的实验研究. 《工程热物理学报》.
1243. 李少华，陶文铨，邹增家，杨沫（1997）. 圆内开缝八边形自然对流换热的数值分析. 《西安交通大学学报》.
1244. 康海军，马雅玲，陶文铨（1997）. 圆柱和圆台形空腔内冲击式传质的实验研究. 《西安交通大学学报》.
1245. Tao Wenquan (1997). DEVELOPING HEAT TRANSFER AND FRICTION CHARACTERISTICS OF SQUARE DUCT WITH 90 DEG.TWIST. Journal of Engineering Thermophysics.
1246. Ben‐Wen Li, Wen‐Quan Tao, Ri-Xin Liu (1997). Ray effect in ray tracing method for radiative heat transfer. International Journal of Heat and Mass Transfer.DOI
1247. Ben‐Wen Li, Wen‐Quan Tao, Yuhong Nie (1997). Uniform Deterministic Discrete Method for three dimensional systems. Journal of Thermal Science.DOI
1248. L.B. Wang, Wen‐Quan Tao (1997). Numerical analysis on heat transfer and fluid flow for arrays of non‐uniform plate length aligned at angles to the flow direction. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
1249. Chuang-Yao Zhao, Wen‐Quan Tao (1997). A three dimensional investigation of turbulent flow and heat transfer around sharp 180-deg turns in two-pass rib-roughened channels. International Communications in Heat and Mass Transfer.DOI
1250. 李女武，李惠珍，康海军，陶文铨，辛荣昌（1996）. 析湿正弦波纹翅片管束的热质交换特性研究. 《西安交通大学学报》.
1251. 李本文，陈海耿，宁宝林，陶文铨（1996）. 复杂炉型内有非均质参与的热过程数学模型. 《化工学报》.
1252. J. G. Wei, Wen‐Quan Tao (1996). Three-dimensional numerical simulation of natural convection heat transfer in an inclined cylindrical annulus. Journal of Thermal Science.DOI
1253. Jiashuai Liu, Wen‐Quan Tao (1996). Numerical analysis of natural convection around a vertical channel in a rectangular enclosure. Heat and Mass Transfer.DOI
1254. M. Chen, Peixuan Li, Wen‐Quan Tao (1996). Investigation on existing correlations for prediction of HFC-134A in-tube boiling heat transfer coefficients based on experiment.
1255. J. G. Wei, Wen‐Quan Tao (1996). A NUMERICAL STUDY OF NATURAL CONVECTION IN A VERTICAL ANNULUS WITH CONSTANT HEAT FLUX ON THE INNER WALL. International Journal of Numerical Methods for Heat &amp Fluid Flow.DOI
1256. Mo Yang, Wen‐Quan Tao (1995). Three-Dimensional Natural Convection in an Enclosure With an Internal Isolated Vertical Plate. ASME Journal of Heat and Mass Transfer.DOI
1257. H. Z. Li, Weixin Li, Wen‐Quan Tao (1995). Experimental study of natural convection heat transfer between an outer horizontal cylindrical envelope and an inner concentric heated square cylinder with two slots. Heat and Mass Transfer.DOI
1258. Mei Lin, Wen‐Quan Tao, S. S. Lue (1995). Study on friction factor of developing and developed laminar flow in annular-sector ducts. Journal of Thermal Science.DOI
1259. Chuang-Yao Zhao, Wen‐Quan Tao (1995). Pressure loss through sharp 180 deg turn in a relatively short two-pass smooth and rib-roughened channel. Journal of Thermal Science.DOI
1260. L.B. Wang, Wen-Quan Tao (1995). Heat transfer and fluid flow characteristics of plate-array aligned at angles to the flow direction. International Journal of Heat and Mass Transfer.DOI
1261. R. C. Xin, Zhe Dong, M. A. Ebadian, Wen‐Quan Tao (1995). Forced convection in ducts with a boundary condition of the third kind. Journal of Thermophysics and Heat Transfer.DOI
1262. Peixuan Li, Wen‐Quan Tao (1995). Experimental Study on Mass/Heat Transfer of Circular Jet Impingement in Cubical Cavities. Enhanced heat transfer/Journal of enhanced heat transfer.DOI
1263. H. J. Kang, Wen‐Quan Tao (1994). Discussion on the network method for calculating radiant interchange within an enclosure. Journal of Thermal Science.DOI
1264. B. Cheng, Wen‐Quan Tao (1994). Experimental Study of R-152a Film Condensation on Single Horizontal Smooth Tube and Enhanced Tubes. ASME Journal of Heat and Mass Transfer.DOI
1265. R. C. Xin, Wen‐Quan Tao (1994). Analytical Solution for Transient Heat Conduction in Two Semi-infinite Bodies in Contact. ASME Journal of Heat and Mass Transfer.DOI
1266. Qiuwang Wang, Mo Yang, Wen‐Quan Tao (1994). Natural convection in a square enclosure with an internal isolated vertical plate. Wärme- und Stoffübertragung.DOI
1267. 辛荣昌，陶文铨（1993）. 非稳态导热充分发展阶段的分析解. 《工程热物理学报》.
1268. C. M. Ling, Wen‐Quan Tao (1993). Two dimensional numerical simulation of transient natural convection in freezer. Journal of Thermal Science.DOI
1269. Mo Yang, Wen‐Quan Tao, Qiuwang Wang, S. S. Lue (1993). On identical problems of natural convection in enclosures and applications of the identity character. Journal of Thermal Science.DOI
1270. P.W. Li, Wen‐Quan Tao (1993). Numerical and experimental investigations on heat/mass transfer of slot-jet impingement in a rectangular cavity. International Journal of Heat and Fluid Flow.DOI
1271. Huai-Zhang Huang, Wen‐Quan Tao (1993). An Experimental Study on Heat/Mass Transfer and Pressure Drop Characteristics for Arrays of Nonuniform Plate Length Positioned Obliquely to the Flow Direction. ASME Journal of Heat and Mass Transfer.DOI
1272. S. S. Lue, Hongqian Huang, Wen‐Quan Tao (1993). Experimental study on heat transfer and pressure drop characteristics in the developing region for arrays of obliquely positioned plates of nonuniform length. Experimental Thermal and Fluid Science.DOI
1273. 李惠珍，李斌，辛荣昌，周平中，杨建，康海军，陶文铨（1992）. 正弦波纹翅片管换热器传热和阻力特性的试验研究. 《流体机械》.
1274. 杨沫，王育清，傅燕弘，陶文铨（1992）. 具有表面辐射的导热和对流耦合问题的数值计算方法. 《西安交通大学学报》.
1275. H. L. Zhang, Wen‐Quan Tao, Qianqiu Wu (1992). Numerical simulation of natural convection in circular enclosures with inner polygonal cylinders, with confirmation by experimental results. Journal of Thermal Science.DOI
1276. Mo Yang, Wen‐Quan Tao (1992). NUMERICAL STUDY OF NATURAL CONVECTION HEAT TRANSFER IN A CYLINDRICAL ENVELOPE WITH INTERNAL CONCENTRIC SLOTTED HOLLOW CYLINDER. Numerical Heat Transfer Part A Applications.DOI
1277. 杨沫，陶文铨，陈钟颀（1991）. 缝隙度对封闭圆内开缝圆环自然对流换热的影响. 《工程热物理学报》.
1278. H. L. Zhang, Qianqiu Wu, Wen‐Quan Tao (1991). Experimental Study of Natural Convection Heat Transfer Between a Cylindrical Envelope and an Internal Concentric Heated Octagonal Cylinder With or Without Slots. ASME Journal of Heat and Mass Transfer.DOI
1279. 康海军，陶文铨（1990）. 圆锥形空腔内冲击式传质(传热)的实验研究. 《工程热物理学报》.
1280. 陶文铨（1989）. 关于“充分发展”概念的讨论. 《中国大学教学》, No. 1.下载原文
1281. 尚欢民，吴清金，陶文铨（1989）. 竖环形夹层内自然对流换热的实验研究和数值计算. 《西安交通大学学报》.
1282. Q. Xiao, R. C. Xin, Wen‐Quan Tao (1989). Analysis of fully developed laminar flow and heat transfer in asymmetric wavy channels. International Communications in Heat and Mass Transfer.DOI
1283. Wen‐Quan Tao (1989). Heat/mass transfer for circular jet impingement in a cylindrical cavity with one end open to the ambient air. AIAA Aerospace Sciences Meeting.DOI
1284. 阎小军，张惠华，陶文铨（1987）. 空气横掠错排板簇换热与阻力特性的试验研究. 《工程热物理学报》.
1285. Wen‐Quan Tao (1987). Conjugated Laminar Forced Convective Heat Transfer From Internally Finned Tubes. ASME Journal of Heat and Mass Transfer.DOI
1286. Xiaojun Terry Yan, Huihua Zhang, Wen‐Quan Tao (1986). AN EXPERIMENTAL INVESTIGATION, OF HEAT TRANSFER AND PRESSURE DROP PERFORMANCE FOR ARRAYS OF STAGGERED PLATES ALIGNED WITH AIR FLOWS. International Heat Transfer Conference (IHTC).DOI
1287. 张惠华，王允中，陶文铨（1985）. 强制对流换热的萘昇华模拟研究. 《工程热物理学报》.
1288. 陶文铨，李斌（1985）. 处理区域内部导热与辐射联合作用的数值计算方法. 《西安交通大学学报》.
1289. Wen‐Quan Tao, Ephraim M. Sparrow (1985). Ambiguities related to the calculation of radiant heat exchange between a pair of surfaces. International Journal of Heat and Mass Transfer.DOI

预印本

1. Zhao‐Ren Li, Ding-Chen Fang, Wentao Ji, Li Chen, Wen‐Quan Tao (2026). A Second-Order Least-Squares Gradient Reconstruction Scheme on Unstructured Grids. SSRN Electronic Journal.DOI
2. Wen‐Tao Ji, Peng Gao, Qi Dong, Tengfei He, Fu-Feng Zhao, Rixin Li, Jinbo Li, Wen‐Quan Tao (2026). Gas-liquid two-phase flow distribution for different header configurations and perforated insertion tubes for micro-channel heat exchangers. SSRN Electronic Journal.DOI
3. Zhao‐Ren Li, Jiang Zhu, Quan Wen, Wen‐Tao Ji, Wen‐Quan Tao (2025). A New Least-Squares Gradient and Interpolation Scheme Based on the Finite Volume Method. SSRN Electronic Journal.DOI
4. Yi-Jia Chen, Wen‐Zhen Fang, Guo-Rui Zhao, Wen‐Quan Tao (2025). Optimizing the Cold Start Strategies for Pemfc Stacks Using Data-Driven Assisted Models. SSRN Electronic Journal.DOI
5. Wen‐Tao Ji, Peng Gao, Yi Liu, Dong Qi, Wen‐Quan Tao (2025). Modeling and Experimental Study on the Performance of New Finless Flat Tube Heat Exchanger Under Different Conditions. SSRN Electronic Journal.DOI
6. Ruoxuan Fan, Fan Bai, Siyuan Yang, Wen‐Quan Tao (2025). A three-dimensional multiphase model of proton exchange membrane electrolysis cell based on self-developed simulation platform. SSRN Electronic Journal.DOI
7. Hang Yu, Lei Chen, Yulong Yu, Tianyi Zhang, Shuangyu Lv, Wen‐Quan Tao (2025). A Fast Prediction Method for Multi-Physical Fields of Chip Heat Exchangers Based on CFD and Convolutional Neural Network. SSRN Electronic Journal.DOI
8. Ruiyuan Zhang, Li Bo Chen, Wen‐Quan Tao (2023). Analysis of Carbon Particle Overlap Effects on Oxygen Reactive Transport in Catalyst Layers of Proton Exchange Membrane Fuel Cells.DOI
9. Fan Bai, Zhiyi Tang, Ren-Jie Yin, Hong-Bing Quan, Lei Chen, David Dai, Wen‐Quan Tao (2023). A Novel "3d+Digital Twin+3d" Upscaling Strategy for Predicting the Detailed Multi-Physics Distributions in a Commercial-Size Proton Exchange Membrane Fuel Cell Stack. SSRN Electronic Journal.DOI
10. Lingyi Guo, Ming-Jia Li, Wen-Quan Tao (2023). Pore-scale Investigation of a Gas Diffusion Layer Model Coupled Mass Transfer and Two-phase Flow: Effects of the Compression Ratio.DOI
11. Zhuo Zhang, Fan Bai, Pu He, Wen‐Quan Tao (2022). Investigation of a Novel Cathode Flow Field of Proton Exchange Membrane Fuel Cell.DOI
12. Xia Yang, Li Chen, Ji‐Wang Luo, Wen‐Quan Tao (2022). Topology Optimization of Liquid-cooled Heat Sinks with Different Inlets and Outlets.DOI
13. Shu-Qi Jin, Nan Li, Fan Bai, Yujie Chen, Xiang-You Feng, Hao-Wei Li, Xiao-Ming Gong, Wen‐Quan Tao (2022). Fast Temperature Prediction in a Real Data Center Of Multi-Variables Based on the Reduced Order Model Combined with Data-Driven Method. SSRN Electronic Journal.DOI
14. Peng-Yi Cui, Jiaqi Wang, Feng Yang, Yuandong Huang, Yong Yang, Wen‐Quan Tao (2022). Reduced-Scale Numerical Study on the Effects of Radiant Floor Heating Integrated with Natural Ventilation on Indoor Flow and Dispersion. SSRN Electronic Journal.DOI
15. Ting Min, Yimin Gao, Ming-Jia Li, Qinjun Kang, Wen‐Quan Tao (2015). Changes in porosity, permeability and surface area during rock dissolution: effects of mineralogical heterogeneity. arXiv (Cornell University).DOI

书籍章节

1. Zi-Xiang Tong, Dong Li, Ya‐Ling He, Wen‐Quan Tao (2021). Modeling Fouling Process on Tubes with Lattice Boltzmann Method and Immersed Boundary Method. Springer eBooks.DOI
2. Songzhen Tang, Zhan-Bin Liu, Ming-Jia Li, Wen‐Quan Tao (2021). Experimental and Numerical Investigation on Fouling and Heat Transfer Performance of a Novel H-type Finned Heat Exchanger. Springer eBooks.DOI
3. Kai-Wen Duan, Ji-Wei Shi, Wen-Quan Tao (2021). Thermal Design for the Passive Cooling System of Radio Base Station with High Power Density. Springer eBooks.DOI
4. Ya‐Ling He, Wen‐Quan Tao (2014). Convective Heat Transfer Enhancement: Mechanisms, Techniques, and Performance Evaluation. Advances in heat transfer.DOI