岳珠峰

期刊论文

1. 李飞，温志勋，罗磊，岳珠峰，刘智名（2026）. 镍基单晶飞秒激光制造气膜孔疲劳断裂行为. 《航空学报》.
2. 金则安，史文昊，刘智泉，刘伟，岳珠峰（2026）. 复杂管系“管形布局-卡箍位置”建模与协同优化方法. 《西北工业大学学报》.
3. Ya-Jie Bao, Shou-Yi Sun, F. Tian, Honglin Li, Zhufeng Yue (2026). Fatigue life prediction of aero engine blade tenons based on the second-order HDMR-SCN method. Aerospace Science and Technology.DOI
4. Ya-Jie Bao, Shou-Yi Sun, Hong-Lin Li, Zhufeng Yue, Wei-Zhu Yang, Xing Ai, Yong Tang (2026). Data-driven dual-stage optimization method and its application in compressor blade design. International Communications in Heat and Mass Transfer.DOI
5. Qi Wang, Zhiquan Liu, Zean Jin, Wei Liu, Zhufeng Yue (2026). Availability-Aware Remaining Useful Life Prediction for Aero-Engines with Unavailable Sensor Channels. Aerospace.DOI
6. Jundong Wang, Xinyi Li, Jian Wu, Yuanmin Tu, Song Wu, Zhixun Wen, Zhufeng Yue (2026). Thermo-mechanical fatigue of nickel-based single crystal superalloys: Experiments, mechanisms, and theoretical models. Aerospace Science and Technology.DOI
7. Zhen Qin, Yanchao Zhao, Zhixun Wen, Zhenwei Li, Lu Cheng, Xipeng Yin, Zhufeng Yue (2026). Effect of inter-hole interference on creep rupture behavior and microstructural evolution of a nickel-based single crystal superalloy. Engineering Failure Analysis.DOI
8. Tao Zuo, Haiqing Pei, Zhixun Wen, Shuaishuai Wang, Mengshuai Liu, Kuahai Yu, Zhufeng Yue (2026). Long-term oxidation mechanism of a precipitation-strengthened Ni-based superalloy with coupled modeling of oxide growth and stress evolution. Corrosion Science.DOI
9. Lijian Shi, Zhixun Wen, Meng Li, Yizhe Yang, Jianhui Wang, Zhufeng Yue (2026). Intermediate‑temperature creep behavior of Ni-based single crystal superalloy with fan‑shaped film cooling holes: Fracture mechanism, constitutive model and life prediction. Thin-Walled Structures.DOI
10. Jieyu Dai, Jundong Wang, Laohu Long, Xing Ai, Jiaxun Zeng, Zhixun Wen, Zhufeng Yue (2026). Creep notch strengthening and equivalent uniaxial life mapping of notched plate specimens in a nickel-based single-crystal superalloy. Engineering Fracture Mechanics.DOI
11. Z M Li, Zhixun Wen, Yuyao Gong, Shiyang Li, Zhufeng Yue (2026). Fatigue behavior and failure mechanism of diffusive film cooling holes considering metering angle effect. International Journal of Fatigue.DOI
12. Fei Li, Hao Zhang, Haiqing Pei, 李高友, Zhixun Wen, Xing Ai, Zhufeng Yue (2026). Corrosion-induced failure mechanism and life model of low-cycle fatigue in Nickel-based single crystal superalloys. International Journal of Fatigue.DOI
13. Hang. Meng, Peiyan Wang, Jianyu Wang, Yanjun Guo, Weizhu Yang, Shihui Huo, Jianglin Dong, Ping Zhang, Ke Zhang, Zhufeng Yue (2026). Enhancing fatigue resistance of additively manufactured novel Ni-based superalloy via crystal orientation and intergranular strain compatibility: An experimental and numerical investigation. Additive manufacturing.DOI
14. Yanchao Zhao, Hao Cheng, Ping Wang, LI HAITAO, Xi Ren, Zhixun Wen, Ziyan Wu, Zhufeng Yue (2026). Multi-objective optimization framework based on SACGAN-NSGA-II for film cooling performance of conical holes on the leading edge of turbine blades. International Communications in Heat and Mass Transfer.DOI
15. Qiyan Shi, Jundong Wang, Zhixun Wen, Zhufeng Yue (2026). Unveiling the temperature-dependent fatigue mechanisms of LPBF Inconel 718 with experiments and crystal plasticity simulations. International Journal of Fatigue.DOI
16. Zhenwei Li, Zhixun Wen, Yi Yuan, Zhufeng Yue (2026). Influence of primary crystal orientation on deformation and crack nucleation around dense film cooling holes in Ni-based single crystal superalloy. Materials Characterization.DOI
17. Zean Jin, Wenhao Shi, Zhiquan Liu, Wei Liu, Zhufeng Yue (2026). A modeling and collaborative optimization method for pipe shape layout and clamp position in complex piping system. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
18. Haiqing Pei, Haoyu Yu, Shizhi Zhao, Xiaonan Gao, Zhixun Wen, Zhufeng Yue, Laohu Long, Tianjian Wang (2026). Effect of Water Vapor on the Oxidation Behavior of Ni-Based Superalloys Under the Coupling Conditions of Thermal Shock and Creep. High Temperature Corrosion of Materials.DOI
19. Qiyan Shi, Jundong Wang, Jun Yu, Yun Liu, Zhixun Wen, Zhufeng Yue (2026). Microstructural versus thermal activation: Unveiling the competitive mechanisms and constitutive modeling of creep anisotropy in WAAM titanium alloy. Engineering Fracture Mechanics.DOI
20. Guangxian Lu, Zhixun Wen, Tingting Zhao, Yunsong Zhao, Zhufeng Yue (2026). Effect of microstructural degradation on the hydrogen embrittlement susceptibility and mechanism of a Ni-based single crystalline superalloy. Materials Science and Engineering A.DOI
21. Jundong Wang, Xiaolei Gu, Xiangqian Xu, Zhixun Wen, Zhufeng Yue (2026). Influence of stress dwell location on the creep–fatigue behavior of notched nickel-based single-crystal superalloy specimens at 900 °C. Theoretical and Applied Fracture Mechanics.DOI
22. 赵玉杰，李磊，孙守义，伍佳伟，宋誉宇，岳珠峰（2025）. 20 kHz空气射流激振技术及涡轮叶片高阶振动研究. 《推进技术》.
23. 裴海清，肖竞博，李微，于昊玉，温志勋，岳珠峰（2025）. Al-O元素聚集对镍基单晶高温合金氧化影响的第一性原理研究. 《中国腐蚀与防护学报》.
24. 李世洋，裴海清，李振威，赵彦超，温志勋，岳珠峰（2025）. 镍基单晶涡轮叶片气膜孔结构等寿命疲劳强度评估. 《力学季刊》.
25. 岳珠峰（2025）. 镍基单晶叶片原始疲劳质量评估.
26. 岳珠峰（2025）. 涡轮叶片本征力学性能测试及评估. 《科学出版社》.
27. 岳珠峰（2025）. 空天飞行器材料与结构高温试验技术.
28. Lu Liu, Shou-Yi Sun, Huitao Chen, Huahui Yi, Min Dou, Zhufeng Yue, Lei Li (2025). Enhanced tribological performance of shot peened nickel-based single crystal superalloy with heterogeneous gradient nanostructure at elevated temperature. Wear.DOI
29. Xiangyu Cai, Hong-Jiao Lin, Zhongyuan Sun, Lu Zhang, Songshan Jiang, Nan Meng, Zhixun Wen, Tao Feng, Shouyi Sun, Zhufeng Yue (2025). Anomalous High-Temperature Oxidation Behavior of SiC Coatings on Cf/SiC Composites: Degradation Mechanisms and Microstructural Evolution from 1200 °C to 1400 °C. Composites Part B: Engineering.DOI
30. Ming-De Tong, Han-Xiang Li, Wan-Bo Hou, Tao Feng, Hong-Jiao Lin, Xinhao Shi, Zhufeng Yue, Qiangang Fu (2025). Research on 3D printing and mechanical behavior of continuous-fiber reinforced C/SiC composites with negative Poisson’s ratio. Composites. Part A, Applied science and manufacturing.DOI
31. Haizheng Song, Huagang Lin, Chang-Cong Zhou, Lei Li, Zhufeng Yue (2025). A new fully decoupled strategy for reliability optimization based on adaptive Kriging with improved efficient global optimization and weighted K-means clustering. Mechanical systems and signal processing.DOI
32. Wei-Zhu Yang, Tian-Kai Li, Hao-Wei Yang, Zhenan Zhao, Shou-Yi Sun, Lei Li, Zhufeng Yue (2025). Additively manufactured mechanical meta-materials: manufacturing defects, process-defect relationship and evaluation of mechanical properties considering defects. International Journal of Structural Integrity.DOI
33. Huagang Lin, Hui Feng, Haizheng Song, Zhufeng Yue, Zhichun Yang (2025). A flutter reliability optimization approach for aerospace composite structures based on adaptive ensemble model. Composite structures.DOI
34. Wei-Zhu Yang, Hao-Wei Yang, Tian-Kai Li, Pan Wang, Xin-Mei Wang, Lei Li, Zhufeng Yue (2025). Additively manufactured mechanical meta-materials: design and applications to aeroengine structures. International Journal of Structural Integrity.DOI
35. Haizheng Song, Huagang Lin, Chang-Cong Zhou, Lei Li, Zhufeng Yue (2025). Adaptive ensemble model-based approach for estimating failure probability function using global error measures with application in reliability optimization. Engineering structures.DOI
36. Wei Huang, Shou-Yi Sun, Ya‐Jun Zeng, Lei Li, Zhufeng Yue (2025). Investigating the Influence of Boring Speed on Fatigue Life and Damage Mechanisms of Ferritic Ductile Cast Iron. Fatigue & Fracture of Engineering Materials & Structures.DOI
37. Yu-xing Liu, Zhixun Wen, Meng Li, Cheng Wang, Zhenwei Li, Ming Li, Zhufeng Yue (2025). A comparative study of auxiliary gases’ effects on film cooling hole machining quality in femtosecond laser helical drilling. Optics & Laser Technology.DOI
38. Yanjun Guo, Hang Meng, Zihao Zhu, Jianyu Wang, Peiyan Wang, Peiyan Wang, Tao Zuo, Shihui Huo, Zhufeng Yue (2025). Physics-informed neural network-based life prediction for copper alloy under low-cycle fatigue and creep-fatigue interaction. International Journal of Fatigue.DOI
39. Jundong Wang, Xiangqian Xu, Jian Qing Wu, Xun Wendy Gu, Zhixun Wen, Zhufeng Yue (2025). Stress or strain? Appropriate parameters for predicting the fatigue life of single-crystal nickel-based alloys. Engineering Failure Analysis.DOI
40. Haiqing Pei, Shuaishuai Wang, Hao Zhang, Haoyu Yu, Xiaoyi Shi, Yanqiu Yang, Zhixun Wen, Zhufeng Yue (2025). Oxidation-creep damage assessment of Ni-based single-crystal superalloy and coated system. Journal of Material Science and Technology.DOI
41. Yuxing Liu, Zhixun Wen, Meng Li, Meng Li, Chengen Wang, Ming Li, Ming Li, Zhenwei Li, Zhufeng Yue (2025). Femtosecond laser helical drilling on nickel-based single crystal superalloy: Parameter influence laws, surface integrity and formation mechanisms. Precision Engineering.DOI
42. Yujie Zhao, Yixin Qu, Honglin Li, Honglin Li, Shouyi Sun, Lei Li, Zhufeng Yue (2025). Global-local hierarchical anti-vibration optimization of turbine blade based on adaptive multi-Kriging model. Applied Mathematical Modelling.DOI
43. 旭光 鄭，Xiangqian Xu，Zhixun Wen，Zhufeng Yue (2025). Research on Creep–Fatigue Interaction and Constitutive Model of Micro Sampling of Superalloy Blades. Fatigue & Fracture of Engineering Materials & Structures.DOI
44. Meng Li, Zhixun Wen, Ping Wang, Yuxing Liu, Zhufeng Yue (2025). Ultrafast laser processing of shaped film cooling holes for aero-turbine blades: Surface integrity, parameter influence and forming mechanism. Journal of Manufacturing Processes.DOI
45. Zhenwei Li, Cheng Wang, Zhixun Wen, Zhufeng Yue (2025). Surface integrity and low cycle fatigue behavior of Ni-based single-crystal film cooling holes processed by ECM, EDM and PLM. Engineering Fracture Mechanics.DOI
46. Qiyan Shi, Jundong Wang, Xiaojun Xu, Yun Liu, Zhixun Wen, Zhufeng Yue (2025). Temperature-dependent tensile anisotropic behavior of WAAM-TC4 dual-phase titanium alloy: Microstructural evolution, deformation mechanisms, and fracture characteristics. Materials Science and Engineering A.DOI
47. Lijian Shi, Zhixun Wen, Haiqing Pei, Ming Li, Meng Li, Xing Ai, Jianhui Wang, Zhufeng Yue (2025). Creep failure mechanisms and lifetime prediction of directionally solidified superalloy turbine blades. Engineering Failure Analysis.DOI
48. Hongyan Zhu, Shuhua Wang, Ze’an Jin, Wei Liu, Zhufeng Yue (2025). Research Progress in Aircraft Pipeline Dynamics Characterization: a Review. Journal of Vibration Engineering & Technologies.DOI
49. Yizhe Yang, Zhixun Wen, Haiqing Pei, Lijian Shi, Jingbo Xiao, Zhufeng Yue (2025). Effect of creep behavior on the Ni-based single crystal blade structure under abrupt loading conditions. Thin-Walled Structures.DOI
50. Jundong Wang, Wenqing Wu, Xiangqian Xu, Zhixun Wen, Zhufeng Yue (2025). Effect of thickness on fatigue crack initiation of nickel-based single crystal superalloy micro notched specimens at 850 °C. Engineering Fracture Mechanics.DOI
51. Fei Li, Zhixun Wen, Lei Luo, Xi Ren, Yuan Li, Haiqing Pei, Zhufeng Yue (2025). Fatigue fracture mechanism and life prediction of nickel-based single crystal superalloy with film cooling holes considering initial manufacturing damage. International Journal of Fatigue.DOI
52. Guangxian Lu, Yunsong Zhao, Zhixun Wen, Tingting Zhao, William Yi Wang, Zhufeng Yue (2025). Temperature dependence of hydrogen embrittlement susceptibility of nickel-based single crystal superalloy. Journal of Alloys and Compounds.DOI
53. Jundong Wang, Jun Yu, Zhixun Wen, Xiangqian Xu, Yanqi Shi, Zhufeng Yue (2025). Cyclic Mechanical Behavior, Damage‐Coupled Constitutive Model, and Remaining Life Prediction Model of QCr0.8 at High Temperature. Fatigue & Fracture of Engineering Materials & Structures.DOI
54. 杨未柱，樊哲铭，李磊，王心美，曾延，岳珠峰（2024）. 融合增材制造技术的工程力学专业课程创新实验教学实践. 《大学教育》.
55. 朱西点，杨未柱，孙培杰，李磊，岳珠峰（2024）. 基于晶体塑性理论和XFEM的镍基单晶三维裂纹扩展仿真研究. 《航空科学技术》.
56. 杨未柱，何新党，李磊，李朗，敖良波，岳珠峰（2024）. 基于虚拟仿真实验的实验力学混合式一流课程建设. 《实验科学与技术》.
57. Lu Liu, Shou-Yi Sun, Tian-Yu Yuan, Huitao Chen, Jie Li, Zhufeng Yue, Lei Li (2024). Effects of thermal exposure on microstructure deformation and evolution of shot peened nickel-based single crystal superalloy. Surface & Coatings Technology.DOI
58. Yujie Zhao, Yuyu Song, Wei-Zhu Yang, Yixin Qu, Lei Li, Zhufeng Yue (2024). Vibration fatigue of film cooling hole structure of Ni-based single crystal turbine blade: Failure behavior and life prediction. Engineering Fracture Mechanics.DOI
59. Zhu-Feng Yue (2024). Utilization of High-Temperature miniaturized testing to Assist in life management for gas turbine Blades: An Overview. Theoretical and applied fracture mechanics (Print).DOI
60. Zhu-Feng Yue (2024). The recent progress in the design of structural strength and life assessment for aero-engine single crystal turbine blades. Materials at High Temperature.DOI
61. Hongyan Zhu, Wei Liu, Liu Yang, Chenchen Lian, Zhufeng Yue (2024). Numerical and experimental research on the fracture damage mechanism of composite clamps for aircraft engine pipeline system. Engineering Fracture Mechanics.DOI
62. Tao Zhang, Zhao Wei, Liping Wang, Liping Wang, Zhuo Xue, Peiyan Wang, Suian Wang, Peiyan Wang, Bowen Qi, Zhufeng Yue (2024). Multi-objective optimization of composite stiffened panels for mass and buckling load using PNN-NSGA-III algorithm and TOPSIS method. Thin-Walled Structures.DOI
63. Wei Zhao, Chenchen Lian, Wenxu Zhang, Hong-Fei Zhang, Tao Zhang, Peiyan Wang, Zhufeng Yue (2024). Test and simulation of high temperature resistant polyamide composite with single lap single bolt connection. Thin-Walled Structures.DOI
64. Jundong Wang, Xiangqian Xu, Hao Lu, Lu Zhang, Yeda Lian, Zhixun Wen, Zhufeng Yue (2024). Fatigue notch strengthening effect of nickel-based single crystal superalloys under different stress ratios. European Journal of Mechanics - A/Solids.DOI
65. Fei Li, Zhixun Wen, Lei Luo, Xi Ren, Zhufeng Yue (2024). Fatigue life prediction of film-cooling Hole specimens with initial damage. International Journal of Mechanical Sciences.DOI
66. Ping Wang, Zhixun Wen, Meng Li, Guangxian Lu, Hao Cheng, Pengfei He, Zhufeng Yue (2024). Modified crystal plasticity constitutive model considering tensorial properties of microstructural evolution and creep life prediction model for Ni-based single crystal superalloy with film cooling hole. International Journal of Plasticity.DOI
67. Xi Ren, Fei Li, Zhixun Wen, Hao Cheng, Zhufeng Yue (2024). Calibrated the direct current potential drop method for fatigue crack propagation testing of nickel-based superalloy with film cooling hole. Theoretical and Applied Fracture Mechanics.DOI
68. Chenchen Lian, Yingying Yi, Peiyan Wang, Shizhen Zhao, Changwei Zhou, Tao Zhang, Zhuo Xue, Ke Zhang, Zhufeng Yue (2024). Experimental and numerical research of aircraft tire debris impact on landing gear brake pipe. Aerospace Science and Technology.DOI
69. Hao Lu, Yeda Lian, Jundong Wang, Zhixun Wen, Leike Yang, Zhufeng Yue (2024). Fatigue assessment of directionally solidified superalloy thin plates under bimodal random processes. Thin-Walled Structures.DOI
70. Hao Cheng, Zhixun Wen, Yanchao Zhao, Ziyan Wu, Xi Ren, Zhufeng Yue (2024). Effect and optimization of geometric parameters and arrangement on film cooling performance of fan-shaped holes based on generalized regression neural network. International Communications in Heat and Mass Transfer.DOI
71. Zhenwei Li, Cheng Wang, Zhixun Wen, Yi Yuan, Haiqing Pei, Pengfei He, Zhufeng Yue (2024). Investigation on high temperature fatigue-oxidation behavior of Ni-based single crystal with film cooling holes considering arrangement effect. Engineering Fracture Mechanics.DOI
72. Qian Yin, Ming Li, Zhixun Wen, Xiufang Gong, Jundong Wang, Fei Li, Wei Sun, Zhufeng Yue (2024). Physically based modelling of orientation deviation effect on mechanical behavior for dual‐phase single‐crystal superalloy. Fatigue & Fracture of Engineering Materials & Structures.DOI
73. Hao Lu, Yeda Lian, Jundong Wang, Zhixun Wen, Zhenwei Li, Zhufeng Yue (2024). Vibration fatigue assessment and crack propagation mechanism of directionally solidified superalloy with film cooling holes. International Journal of Fatigue.DOI
74. Zhuo Xue, Peiyan Wang, Zhufeng Yue, Chenchen Lian, Tao Zhang, Mengke Gao (2024). Advanced cooling channel structures for enhanced heat dissipation in aerospace. Applied Thermal Engineering.DOI
75. Fei Li, Zhixun Wen, Lei Luo, Zhufeng Yue, Ziqi Zang, Meng Li, Zhenwei Li, Yanchao Zhao (2024). Fatigue life estimation of nickel-based single crystal superalloy with different inclined film cooling holes: Initial damage quantification and coupling of damage-fracture mechanics models. International Journal of Plasticity.DOI
76. Jundong Wang, Leike Yang, Yeda Lian, Zhixun Wen, Hao Feng Lu, Zhuobin Ma, Zhufeng Yue (2024). The low-cycle fatigue behavior and an entropy-based life prediction model for Nickel-based single crystal superalloy across an extensive temperature range. Engineering Fracture Mechanics.DOI
77. Jundong Wang, Tianyu Liu, Leike Yang, Zhixun Wen, Zhufeng Yue, Qianzhu Mao (2024). Stress redistribution and stress triaxiality effect on the fatigue life of notched Ni-based single crystal superalloy at 760℃. Theoretical and Applied Fracture Mechanics.DOI
78. Meng Li, Zhixun Wen, Ping Wang, Zhenwei Li, Guangxian Lu, Yuxing Liu, Zhufeng Yue (2024). Size effect of femtosecond laser helical drilling on nickel-based single crystal superalloy. Journal of Manufacturing Processes.DOI
79. Chenchen Lian, Peiyan Wang, Ke Zhang, Kangbo Yuan, Jie Zheng, Zhufeng Yue (2024). Experimental and numerical research on the calculation methods for buckling and post-buckling of aircraft tail inclined stiffened panel under compression load. Aerospace Science and Technology.DOI
80. Wei Wang, Zhufeng Yue, Junfeng Zhang, Yixiong Liu, Yunwu Wu (2024). Steady-State Stress Prediction of Engine Components Using the State Function Method. Lecture notes in electrical engineering.DOI
81. Peiyan Wang, Haoyu Wang, Minghui Liu, F Liu, Zhufeng Yue (2024). A Study on the Extraction and Evaluation Method of Virtual Strain. International Conference on Computational & Experimental Engineering and Sciences.DOI
82. Qi Chang, Changcong Zhou, Haodong Zhao, Wenxuan Wang, Zhufeng Yue (2023). How dependent basic events with interval-valued probabilities affect fault tree analysis. Quality And Reliability Engineering International, Vol. 390, No. 10.DOI
83. 任博，岳珠峰，司勇，崔利杰，曾航（2023）. 基于随机森林的航空安全因果预测新方法. 《系统工程与电子技术》.
84. Xiang-Lei Liu, Jiahui Ding, Wan-Bo Hou, Xinhao Shi, Tao Feng, Xiang-Yuan Meng, Shifeng Wen, Ming-De Tong, Zhufeng Yue (2023). Microstructural, mechanical and corrosion characterization of (C-HA)SiCnws coating on AZ31 magnesium alloy surface. Surface & Coatings Technology.DOI
85. Haozhe Zhang, Wei-Zhu Yang, Qingchang Liu, Yuan Gao, Zhufeng Yue, Baoxing Xu (2023). Mechanical Janus Structures by Soft–Hard Material Integration (Adv. Mater. 6/2023). Advances in Materials.DOI
86. Hongyan Zhu, Xiaochong Wu, Pengzhen Lv, Yuansheng Wang, Huagang Lin, Wei Liu, Zhufeng Yue (2023). Optimization design of a two-stage multidirectional vibration isolation system for large airborne equipment. Multidiscipline Modeling in Materials and Structures.DOI
87. Zhenwei Li, Zhixun Wen, Yuxing Liu, Pengfei He, Ying Dai, Ruiqing Chen, Zhufeng Yue (2023). Low cycle fatigue behavior and crack initiation mechanism of Ni-based single crystal curved thin-walled blade simulator specimen with film cooling holes. International Journal of Fatigue.DOI
88. Chenchen Lian, Peiyan Wang, Xin Chen, Fuchao Liu, Kangbo Yuan, Jie Zheng, Zhufeng Yue (2023). Experimental and numerical research on the analysis methods for buckling and post-buckling of inclined stiffened panel under shear load. Thin-Walled Structures.DOI
89. Zhenwei Li, Zhixun Wen, Meng Li, Pei Haiqing, Fei Li, Wang Jun-dong, Pengfei He, Zhufeng Yue (2023). Research on low‐cycle fatigue behavior of Ni‐based single crystal superalloy with shaped film cooling holes at high temperature. Fatigue & Fracture of Engineering Materials & Structures.DOI
90. Chenchen Lian, Pengyu Ye, Peiyan Wang, Zhufeng Yue, Haowei Yang, Ke Zhang, Jianmin Zhang (2023). Hydrodynamic Effects in Wing Fuel Tank Caused by Debris Impact. Journal of Aerospace Engineering.DOI
91. Haiqing Pei, Shuaishuai Wang, Shuaishuai Wang, Xiaonan Gao, Zhixun Wen, Jundong Wang, Xing Ai, Zhufeng Yue (2023). Thermomechanical fatigue behavior and failure mechanism of a nickel-based directional solidification column crystal superalloy. Engineering Fracture Mechanics.DOI
92. Chenchen Lian, Peiyan Wang, Jingwei Dang, Xiaoyang Wu, Zhufeng Yue, Yongshun Chen, Haowei Yang, Jianmin Zhang (2023). Experimental and numerical analysis of composite fuselage panel impacted by tire burst debris under airworthiness clause. International Journal of Impact Engineering.DOI
93. Hao Lu, Jundong Wang, Yeda Lian, Zhixun Wen, Tianyu Liu, Zhufeng Yue (2023). Effect of orientation deviation on random vibration fatigue behavior of nickel based single crystal superalloy. International Journal of Fatigue.DOI
94. Jundong Wang, Leike Yang, Hao Lu, Zhixun Wen, Tianyu Liu, Qian Yin, Zhufeng Yue (2023). Research on low cycle fatigue damage and macroscopic anisotropic constitutive model of Ni-based single crystal superalloy at different temperatures. International Journal of Fatigue.DOI
95. Hongyan Zhu, Pengzhen Lv, Xiaochong Wu, Yuansheng Wang, Wei Liu, Huagang Lin, Zhufeng Yue (2023). Vibration response analysis of a two-stage vibration isolation system for large airborne equipment. Multidiscipline Modeling in Materials and Structures.DOI
96. Shuning Gu, Hangshan Gao, Zhixun Wen, Zhenwei Li, Chengjiang Zhang, Zhufeng Yue (2023). Creep properties and life model of anisotropic Ni-based single crystal superalloys over a wide temperature range. International Journal of Mechanical Sciences.DOI
97. Ming Li, Alok Gupta, C.J. Bennett, Zhufeng Yue, Wei Sun, Shan‐Tung Tu (2023). Cyclic plasticity of additively manufactured Ti-6Al-4V bracket for aeroengine application. International Journal of Mechanical Sciences.DOI
98. Shuning Gu, Hangshan Gao, Jundong Wang, Zhenwei Li, Xiaoshuai Wang, Qiyan Shi, Zhixun Wen, Zhufeng Yue (2023). Anisotropy of Young's Modulus of DD6 from 25 to 1200 °C Based on Nondestructive Dynamic Method. Advanced Engineering Materials.DOI
99. Wei Sun, Ming Li, Zhixun Wen, Guo‐Yan Zhou, Zhufeng Yue, Shan‐Tung Tu (2023). Uncertainties in and recommendations to small punch tensile and creep tests for ductile materials. Engineering Fracture Mechanics.DOI
100. Hao Lü, Jundong Wang, Yeda Lian, Zhixun Wen, Tianyu Liu, Zhufeng Yue (2023). Random vibration fatigue behavior of directionally solidified superalloy: Experiments and evaluation of life prediction methods. International Journal of Fatigue.DOI
101. Yizhe Yang, Zhixun Wen, Haiqing Pei, Yunsong Zhao, Xipeng Yin, Shuaishuai Wang, Zhufeng Yue (2023). Effect of the withdrawal rate on the microstructure and creep behavior of the directionally solidified nickel-based superalloy. Progress in Natural Science Materials International.DOI
102. Shuning Gu, Hangshan Gao, Jundong Wang, Chengjiang Zhang, Zhixun Wen, Ai Xing, Zhufeng Yue (2023). A non-isothermal creep fracture prediction method of DS superalloy considering microstructural damage. Engineering Fracture Mechanics.DOI
103. Lei Li, Yan Zeng, Jie Li, Yanchao Zhao, Tianyu Yuan, Zhufeng Yue (2023). Effect of crystal orientation on elastic stresses and vibration characteristics of nickel-based single crystal turbine blade. Materials Today Communications.DOI
104. Wei Sun, Suo Li, Guo‐Yan Zhou, Ming Li, Zhixun Wen, Zhufeng Yue, Shan‐Tung Tu (2023). Interpretation of non-conventional miniaturized creep test: derivation of equivalent gauge length. Journal of Materials Research and Technology.DOI
105. Ming Li, Hongwei Liu, Juan Du, Zhixun Wen, Zhufeng Yue, Wei Sun (2023). Analytical and inverse method for determining high temperature properties of materials using small punch creep: a review. Multidiscipline Modeling in Materials and Structures.DOI
106. Hao Lü, Jundong Wang, Zhixun Wen, Tianyu Liu, Yeda Lian, Zhufeng Yue (2023). Vibration fatigue behavior and life prediction of directionally solidified superalloy based on the phase transformation theory. Engineering Fracture Mechanics.DOI
107. Xiaoyang Wu, Ke Zhang, Bin Zhao, Peiyan Wang, Wei Zhao, Zhufeng Yue (2023). Dynamic response and safety assessment of cabin door under the tire burst based on CFD method. International Journal of Impact Engineering.DOI
108. Haihe Li, Haihe Li, Pan Wang, Zhuo Su, Zhuo Su, Lei Li, Zhufeng Yue (2023). Data-driven reliability assessment with scarce samples considering multidimensional dependence. Probabilistic Engineering Mechanics.DOI
109. Yamin Zhang, Xinzhe Zhang, Jiajia Wang, Xi Ren, Xiaoshuai Wang, Ruiqing Chen, Zhufeng Yue (2023). High cycle fatigue life prediction model based on crystal plasticity and continuum damage mechanics for Ni-based single crystal superalloys under a multiaxial stress state. International Journal of Plasticity.DOI
110. CHANG Qi, ZHOU Zhang-cong, LIU Fu-chao, Hao Zhang, Yue Zhu-feng (2023). Reliability Analysis of Aircraft Door Lock Mechanism with Interval Joint Clearance Uncertainties. Journal of Mechanical Engineering.DOI
111. Zheng Zhang, Pan Wang, Huanhuan Hu, Lei Li, Haihe Li, Zhufeng Yue (2022). Efficient reliability-based design optimization for hydraulic pipeline with adaptive sampling region. Reliability Engineering & System Safety, Vol. 226.DOI
112. 岳珠峰（2022）. 飞行器先进液压管路系统流固耦合动力学与控制. 《科学出版社》.
113. 杨一哲，杨昭，赵云松，裴海清，李萌，杨艳秋，温志勋，岳珠峰（2022）. 不同激光加工工艺的DD406单晶高温合金气膜孔高温氧化行为. 《航空材料学报》.
114. 任博，岳珠峰，崔利杰，王新河，张峰（2022）. 混合数据信息下不确定性描述的改进最大熵函数法. 《西北工业大学学报》.
115. 党乐，郑洁，杜凯，岳春霞，王佩艳，张柯，岳珠峰（2022）. 复合材料多墙盒段弯扭耦合下的屈曲和后屈曲. 《力学季刊》.
116. Peiyan Wang, Yongshun Chen, Chunxia Yue, Wei Zhao, Chenchen Lian, Ke Zhang, Jie Zheng, Zhufeng Yue (2022). An Experimental and Numerical Study on Impact and Compression after Impact of Stiffened Composite Panels. Polymers.DOI
117. Wei Sun, Zhufeng Yue, Zhixun Wen, Ming Li (2022). An overview on material parameter inverse and its application to miniaturized testing at elevated temperature. Journal of Materials Research and Technology.DOI
118. Hongyan Zhu, Wei Liu, Meng Wu, Wangzhen Li, Zhufeng Yue (2022). Experimental Study on Dynamic Responses Characteristics of Straight Pipe Under Equidirectional Two-Point Excitations. Iranian Journal of Science and Technology Transactions of Mechanical Engineering.DOI
119. Zhenan Zhao, Weizhu Yang, Lei Li, Shouyi Sun, Yan Ping Zeng, Zhufeng Yue (2022). Improved high-temperature fatigue performance of laser directed energy deposited Ni-based superalloy by regulating the heat treatment. International Journal of Fatigue.DOI
120. Jundong Wang, Yali Zhang, Xiaoshuai Wang, Zhixun Wen, Zhufeng Yue (2022). Thermodynamics-based method considering orientation and notch effect to predict the high cycle fatigue life of a nickel-based single crystal superalloy. International Journal of Fatigue.DOI
121. Meng Li, Zhixun Wen, Ping Wang, Yu-xing Liu, Zhenwei Li, Zhufeng Yue (2022). Femtosecond laser high-quality drilling of film cooling holes in nickel-based single superalloy for turbine blades with a two-step helical drilling method. Journal of Materials Processing Technology.DOI
122. Fei Li, Zhixun Wen, Ziyan Wu, Zhenwei Li, Haiqing Pei, Qian Yin, Qianzhu Mao, Zhufeng Yue (2022). The EIFS-based fatigue life prediction approach of nickel-based single crystals with film cooling holes at elevated temperature. International Journal of Fatigue.DOI
123. Jundong Wang, Hao Feng Lu, Zhixun Wen, Yeda Lian, Zhenwei Li, Zhufeng Yue (2022). Prediction of fatigue life of TC4 titanium alloy based on normalized equivalent initial flaw size model. Theoretical and Applied Fracture Mechanics.DOI
124. Qi Chang, Changcong Zhou, Marcos A. Valdebenito, Hongwei Liu, Zhufeng Yue (2022). A novel sensitivity index for analyzing the response of numerical models with interval inputs. Computer Methods in Applied Mechanics and Engineering.DOI
125. Jundong Wang, Hao Feng Lu, Zhixun Wen, Yeda Lian, Yingying Wang, Zhufeng Yue (2022). Crystal plasticity theory coupled with meso-damage to predict the ratchetting behavior of nickel-based single crystal superalloy. International Journal of Fatigue.DOI
126. Zhufeng Yue, Ming Li, Lei Li, Zude Zhou (2022). Physical manufacturing: the basic theory and technical system. Multidiscipline Modeling in Materials and Structures.DOI
127. Qian Yin, Zhixun Wen, Jundong Wang, Yeda Lian, Guangxian Lu, Chengjiang Zhang, Zhufeng Yue (2022). Microstructure characterization and damage coupled constitutive modeling of nickel-based single-crystal alloy with different orientations. Materials Science and Engineering A.DOI
128. Xiaoyang Wu, Qing Chen, Bin Zhao, Ke Zhang, Peiyan Wang, Zhufeng Yue (2022). Experimental behavior and shear bearing capacity simulation of stiffened composite panels subjected to invisible damage impact. Thin-Walled Structures.DOI
129. Shile Yao, Kuahai Yu, Shihong Xin, Kai Ran, Zhufeng Yue (2022). Numerical study on dynamic response of hydraulic pipe subjected to the blast pressure of aircraft tire blowout. Engineering Failure Analysis.DOI
130. Bo Ren, Zhufeng Yue, Lijie Cui, Xinhe WANG, Feng Zhang (2022). An improved entorpy-based representation for mixed uncertainty about intervals and points data. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
131. Fei Li, Zhixun Wen, Ziyan Wu, Haiqing Pei, Zhufeng Yue (2022). Fatigue life assessment of nickel-based single crystals considering equivalent initial flaw size model and anisotropy. International Journal of Fatigue.DOI
132. Yan Ping Zeng, Lei Li, Wei Dong Huang, Zhenan Zhao, Weizhu Yang, Zhufeng Yue (2022). Effect of thermal cycles on laser direct energy deposition repair performance of nickel-based superalloy: Microstructure and tensile properties. International Journal of Mechanical Sciences.DOI
133. Xiaoyang Wu, Qing Chen, Ke Zhang, Peiyan Wang, Zhufeng Yue (2022). Experimental and Numerical Analysis of Pressure-Effect Threat Model Based on SPH Method. Journal of Aerospace Engineering.DOI
134. Haiqing Pei, Yizhe Yang, Shuning Gu, Yanchao Zhao, Xiaohu Yao, Zhixun Wen, Zhufeng Yue (2022). Study on oxidation-creep behavior of a Ni-based single crystal superalloy based on crystal plasticity theory. Materials Science and Engineering A.DOI
135. Ming Li, S. Maskill, Zhixun Wen, Zhufeng Yue, Wei Sun (2022). A miniaturized thin‐plate low cycle fatigue test method at elevated temperature. Fatigue & Fracture of Engineering Materials & Structures.DOI
136. Huan Liu, Xindang He, Pan Wang, Zhenzhou Lü, Zhufeng Yue (2022). Time-dependent reliability analysis method based on ARBIS and Kriging surrogate model. Engineering With Computers.DOI
137. Meng Li, Ping Wang, Yan-Qiu Yang, Yizhe Yang, Haiqing Pei, Zhixun Wen, Zhufeng Yue (2022). Oxidation behavior of a nickel-based single crystal superalloy at 1100 °C under different oxygen concentration. Journal of Materials Science.DOI
138. Jiapo Wang, Jianwei Liang, Zhixun Wen, Zhufeng Yue, Yan Peng (2022). Unveiling the local deformation behavior of typical microstructures of nickel-based single crystals under nanoindentation. Mechanics of Materials.DOI
139. YANG Yizhe, YANG Zhao, ZHAO Yunsong, Pei Haiqing, Meng Li, YANG Yanqiu, WEN Zhixun, Yue Zhu-feng (2022). High temperature oxidation behavior of DD406 SX superalloy film cooling holes with different laser drilling processes. DOAJ (DOAJ: Directory of Open Access Journals).DOI
140. Qi Chang, Changcong Zhou, Pengfei Wei, Yishang Zhang, Zhufeng Yue (2021). A new non-probabilistic time-dependent reliability model for mechanisms with interval uncertainties. Reliability Engineering & System Safety, Vol. 215.DOI
141. Haihe Li, Pan Wang, Xiaoyu Huang, Zheng Zhang, Changcong Zhou, Zhufeng Yue (2021). Vine copula-based parametric sensitivity analysis of failure probability-based importance measure in the presence of multidimensional dependencies. Reliability Engineering & System Safety, Vol. 215.DOI
142. 刘伟，朱宏彦，赵玉杰，岳珠峰（2021）. 发动机机匣弧面不规则管路的布局参数多目标优化设计. 《航空动力学报》.
143. 徐鑫东，虞跨海，姚世乐，岳珠峰（2021）. 微米沙尘高温气-粒两相流平板沉积特性研究. 《热能动力工程》.DOI
144. Zhengxing Feng, Zhixun Wen, Meng Li, Yanchao Zhao, Zhufeng Yue (2021). Effect of aging heat treatment on microstructure of Ni-based single crystal superalloys. AIP Advances.DOI
145. Zhenan Zhao, Lei Li, Weizhu Yang, Yan Ping Zeng, Yeda Lian, Zhufeng Yue (2021). A comprehensive study of the anisotropic tensile properties of laser additive manufactured Ni-based superalloy after heat treatment. International Journal of Plasticity.DOI
146. Shuning Gu, Hangshan Gao, Haiqing Pei, Chengjiang Zhang, Zhixun Wen, Zhenwei Li, Zhufeng Yue (2021). Degradation of microstructural and mechanical properties with serviced turbine blades. Materials Characterization.DOI
147. Fei Li, Yali Zhang, Ziyan Wu, Xi Ren, Xiaowei Yue, Haiqing Pei, Zhufeng Yue (2021). Fatigue crack initiation and propagation behavior of nickel-based single crystal DD6 under different drilling processes. Materials Science and Engineering A.DOI
148. Qian Yin, Yeda Lian, Zhixun Wen, Haiqing Pei, Jundong Wang, Zhufeng Yue (2021). Atomic simulation of the effect of orientation on tensile/compressive properties in nickel-based single crystal superalloys. Journal of Alloys and Compounds.DOI
149. Zhen Li, Zhixun Wen, Haiqing Pei, Xiaowei Yue, Pu Wang, Changsheng Ai, Zhufeng Yue (2021). Creep life prediction for a nickel-based single crystal turbine blade. Mechanics of Advanced Materials and Structures.DOI
150. Xiaoyang Wu, Qing Chen, Ke Zhang, Peiyan Wang, Zhufeng Yue (2021). A Study on the Harmfulness of Tire Fragments Impact on Panel Structure Angle and Postures. Journal of Physics Conference Series.DOI
151. Ke Zhang, Qing Chen, Xiaoyang Wu, Peiyan Wang, Zhufeng Yue (2021). Study on the Dynamic Behavior and Impact of Tire Fragments on Aviation Aluminum Alloy Plates. Journal of Physics Conference Series.DOI
152. Chengjiang Zhang, Ping Wang, Zhixun Wen, Zhuangzhuang Xu, Pengfei He, Zhufeng Yue (2021). Study on creep properties of nickel-based superalloy blades based on microstructure characteristics. Journal of Alloys and Compounds.DOI
153. Qian Li, Wei Liu, Kuan Lu, Zhufeng Yue (2021). Flow-induced buckling statics and dynamics of imperfect pipes. Archive of Applied Mechanics.DOI
154. Haiqing Pei, Meng Li, Ping Wang, Xiaohu Yao, Zhixun Wen, Zhufeng Yue (2021). The effect of tensile stress on oxidation behavior of nickel-base single crystal superalloy. Corrosion Science.DOI
155. Fei Li, Zhixun Wen, Ziyan Wu, Shuangbo Liu, Zhenwei Li, Haiqing Pei, Zhufeng Yue (2021). Evaluation of different drilling quality and fatigue life prediction of nickel-based superalloy using equivalent initial flaw size. Engineering Fracture Mechanics.DOI
156. Zhiliang Hong, Xiaowei Yue, Ziyuan Wang, Zhixun Wen, Yi Zhang, Zhen Li, Changsheng Ai, Pu Wang, Xuhui Zhang, Zhufeng Yue (2021). Mechanical properties degradation and microstructure evolution of 2D-SiCf / SiC composites in combustion gas environment. Journal of the European Ceramic Society.DOI
157. Peiyan Wang, Chenchen Lian, Chunxia Yue, Xiaoyang Wu, Jian‐Min Zhang, Ke Zhang, Zhufeng Yue (2021). Experimental and numerical study of tire debris impact on fuel tank cover based on coupled Eulerian-Lagrangian method. International Journal of Impact Engineering.DOI
158. Shuning Gu, Hangshan Gao, Zhixun Wen, Haiqing Pei, Zhenwei Li, Yanchao Zhao, Zhufeng Yue (2021). Creep characteristics of directionally solidified turbine blades based on the difference in original casting characteristics. Journal of Alloys and Compounds.DOI
159. Xindong Xu, Kuahai Yu, Shile Yao, Shihong Xin, Zhufeng Yue, Lei Li (2021). Numerical investigation of impact of non-spherical particles with spin and multi-point contact. Journal of Theoretical and Applied Mechanics/Mechanika Teoretyczna i Stosowana.DOI
160. Haiqing Pei, Jiajia Wang, Zhen Li, Zhenwei Li, Xiaohu Yao, Zhixun Wen, Zhufeng Yue (2021). Oxidation behavior of recast layer of air-film hole machined by EDM technology of Ni-based single crystal blade and its effect on creep strength. Surface and Coatings Technology.DOI
161. Zhixun Wen, Xuhui Zhang, Xiaowei Yue, Xiaoyan Wang, Chengjiang Zhang, Zhufeng Yue (2021). FEM analysis of the stress response and failure mechanism of SiC-coated Cf/SiC composites during thermal shock. Ceramics International.DOI
162. Zhixun Wen, Changsheng Ai, Jundong Wang, Yating Liu, Zhufeng Yue, Xing Ai (2021). A novel extrinsic Fabry-Perot interferometric sensor for Inconel 718 tensile properties measurement. Measurement.DOI
163. Miaomiao Duan, Zhufeng Yue, Qianguang Song (2021). Effect of Superficial Scratch Damage on Tension Properties of Carbon/Epoxy Plain Weave Laminates. Advances in Civil Engineering.DOI
164. 王佩艳，岳春霞，张柯，陈青，岳珠峰（2020）. 复合材料加筋壁板屈曲与后屈曲试验及仿真. 《第二十一届全国复合材料学术会议（NCCM-21)》.DOI
165. 周思博，吴敬涛，邓文亮，岳珠峰（2020）. EB-PVD热障涂层系统界面应力的理论分析. 《表面技术》.DOI
166. Qian Li, Wei Liu, Kuan Lu, Zhufeng Yue (2020). Three-dimensional parametric resonance of fluid-conveying pipes in the pre-buckling and post-buckling states. International Journal of Pressure Vessels and Piping.DOI
167. Huan Li, Lei Li, Jiangkun Fan, Zhufeng Yue (2020). Verification of a cohesive model‐based extended finite element method for ductile crack propagation. Fatigue & Fracture of Engineering Materials & Structures.DOI
168. Xiaochao Liu, Yunqian Zhen, Zhikang Shen, Haiyan Chen, Wenya Li, Wei Guo, Zhufeng Yue (2020). A Modified Friction Stir Welding Process Based on Vortex Material Flow. Chinese Journal of Mechanical Engineering.DOI
169. Zhiyuan Yu, Xinmei Wang, Fuqian Yang, Zhufeng Yue, James C. M. Li (2020). Review of γ’ Rafting Behavior in Nickel-Based Superalloys: Crystal Plasticity and Phase-Field Simulation. Crystals.DOI
170. Zheng Zhang, Changcong Zhou, Qi Chang, Haihe Li, Zhufeng Yue (2020). Time-dependent mechanism reliability analysis with imprecise probability distributions based on envelope function. Mechanics Based Design of Structures and Machines.DOI
171. Wenjing Gao, Honglin Li, Lei Li, Zhenan Zhao, Zhufeng Yue (2020). Numerical simulation of broken pin effects on the flow field and cooling performance of a double-wall cooling configuration. Chinese Journal of Aeronautics.DOI
172. Fei Li, Zhixun Wen, Ziyan Wu, Shuangbo Liu, Zhenwei Li, Haiqing Pei, Zhufeng Yue (2020). A safe fracture fatigue life prediction based on equivalent initial flaw size. International Journal of Fatigue.DOI
173. Shouyi Sun, Lei Li, Zhufeng Yue, Weizhu Yang, Zhenan Zhao, Rui Cao, Songwei Li (2020). Experimental and numerical investigation on fretting fatigue behavior of Nickel-based single crystal superalloy at high temperature. Mechanics of Materials.DOI
174. Zhongkui Zhang, Zhixun Wen, Zhufeng Yue (2020). Nanoindentation study and mechanical property analysis of nickel-based single crystal superalloys. Materials Research Express.DOI
175. Zhongkui Zhang, Zhixun Wen, Zhufeng Yue (2020). Effects of tensile/compressive creeps on microstructure evolution of nickel-based single crystal superalloys. Journal of Alloys and Compounds.DOI
176. Zhongkui Zhang, Zhixun Wen, Zhufeng Yue (2020). Effects of Re on microstructure evolution of nickel-based single crystal superalloys. Applied Physics A.DOI
177. Qian Li, Wei Liu, Kuan Lu, Zhufeng Yue (2020). Nonlinear Parametric Vibration of the Geometrically Imperfect Pipe Conveying Pulsating Fluid. International Journal of Applied Mechanics.DOI
178. Zhenwei Li, Hangshan Gao, Zhaohan Wang, Yanchao Zhao, Zhixun Wen, Zhufeng Yue (2020). Experimental investigation on low cycle fatigue properties of Ni-based alloy with single hole. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde).DOI
179. Haihe Li, Pan Wang, Qi Chang, Changcong Zhou, Zhufeng Yue (2020). Hybrid multiplicative dimension reduction method for uncertainty analysis of engineering structures. Proceedings of the Institution of Mechanical Engineers Part O Journal of Risk and Reliability.DOI
180. Shouyi Sun, Lei Li, Kun He, Zhufeng Yue, Weizhu Yang, Zhiyuan Yu (2020). Fretting fatigue damage mechanism of Nickel-based single crystal superalloys at high temperature. International Journal of Mechanical Sciences.DOI
181. Fuchao Liu, Pengfei Wei, Changcong Zhou, Zhufeng Yue (2020). Reliability and reliability sensitivity analysis of structure by combining adaptive linked importance sampling and Kriging reliability method. Chinese Journal of Aeronautics.DOI
182. Wenyan Gan, Hangshan Gao, Yanchao Zhao, Zhixun Wen, Guangxian Lu, Bo Jiang, Zhufeng Yue (2020). Influence of microstructure degradation induced by pretreatment on the creep behavior in Ni-based single-crystal superalloy with different orientations. Journal of materials research/Pratt's guide to venture capital sources.DOI
183. Lei Li, Zhonghao Tang, Honglin Li, Wenjing Gao, Zhufeng Yue, Gongnan Xie (2020). Convective heat transfer characteristics of twin-web turbine disk with pin fins in the inner cavity. International Journal of Thermal Sciences.DOI
184. Lei Li, Kun He, Shouyi Sun, Weizhu Yang, Zhufeng Yue, Huan Wan (2020). High-Temperature Friction and Wear Features of Nickel-Based Single Crystal Superalloy. Tribology Letters.DOI
185. Yang Yanqiu, Wen Zhixun, Zhao Yanchao, Wang Jiapo, Zhenwei Li, Yue Zhu-feng (2020). Effect of crystallographic orientation on the corrosion resistance of Ni-based single crystal superalloys. Corrosion Science.DOI
186. Fuchao Liu, Pengfei Wei, Chenghu Tang, Pan Wang, Zhufeng Yue (2019). Global sensitivity analysis for multivariate outputs based on multiple response Gaussian process model. Reliability Engineering & System Safety, Vol. 189.DOI
187. 张诚江，胡卫兵，王佳坡，童文伟，温志勋，岳珠峰（2019）. 基于位错运动的镍基单晶各向异性蠕变寿命预测. 《稀有金属材料与工程》.
188. 王佩艳，岳春霞，耿小亮，杨白凤，岳珠峰（2019）. 基于层合参数的工字型加筋壁板稳定性设计. 《材料科学与工程学报》.DOI
189. 余知朴，岳珠峰，刘伟（2019）. 多工况飞机货舱门开启功能的可靠性优化设计. 《机械设计与制造》.DOI
190. 华林，康建雄，王富生，岳珠峰（2019）. 基于混合算法的机翼多功能盒段传感器优化布置. 《科学技术与工程》.
191. Yamin Zhang, Zhixun Wen, Haiqing Pei, Jiapo Wang, Zhenwei Li, Zhufeng Yue (2019). Equivalent method of evaluating mechanical properties of perforated Ni-based single crystal plates using artificial neural networks. Computer Methods in Applied Mechanics and Engineering.DOI
192. Zhenwei Li, Hangshan Gao, Zhixun Wen, Y.Q. Yang, Yamin Zhang, Xing Ai, Zhufeng Yue (2019). Microcrack initiation behavior around film cooling holes in a Ni-based single crystal: In situ observation and crystal plastic analysis. Materials Science and Engineering A.DOI
193. Liyang Liu, Mengfei Cai, Xiaoliang Geng, Peiyan Wang, Zhufeng Yue (2019). Assessment of the load carrying performance of composite cross joints. Journal of Composite Materials.DOI
194. Qian Li, Wei Liu, Kuan Lu, Zhufeng Yue (2019). Nonlinear Parametric Vibration of a Fluid-Conveying Pipe Flexibly Restrained at the Ends. Acta Mechanica Solida Sinica.DOI
195. Haiqing Pei, Zhixun Wen, Zhaohan Wang, Wenyan Gan, Guang Xian Lu, Zhufeng Yue (2019). Transient thermal fatigue crack propagation behavior of a nickel-based single-crystal superalloy. International Journal of Fatigue.DOI
196. Shouyi Sun, Lei Li, Zhufeng Yue, Weizhu Yang, Kun He, Songwei Li (2019). Fretting fatigue failure behavior of Nickel-based single crystal superalloy dovetail specimen in contact with powder metallurgy pads at high temperature. Tribology International.DOI
197. Fujuan Tong, Wenxuan Gou, Lei Li, Zhufeng Yue, Wenjing Gao, Honglin Li (2019). Numerical investigation of high pressure turbine blade tip-shaping effects on the aerothermal and dynamic performance. Multidiscipline Modeling in Materials and Structures.DOI
198. Jiapo Wang, Jianwei Liang, Zhixun Wen, Zhufeng Yue (2019). Void configuration-induced change in microstructure and deformation mechanisms of nano-porous materials. Journal of Applied Physics.DOI
199. Jiapo Wang, Jianwei Liang, Zhixun Wen, Y.Q. Yang, Zhufeng Yue (2019). The inter-hole interference on creep deformation behavior of nickel-based single crystal specimen with film-cooling holes. International Journal of Mechanical Sciences.DOI
200. Weizhu Yang, Zongzhan Gao, Zhufeng Yue, Xiaodong Li, Baoxing Xu (2019). Hard-particle rotation enabled soft–hard integrated auxetic mechanical metamaterials. Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences.DOI
201. Yamin Zhang, Zhixun Wen, Haiqing Pei, Yanchao Zhao, Zhenwei Li, Zhufeng Yue (2019). Microstructure evolution mechanisms in nickel-based single crystal superalloys under multiaxial stress state. Journal of Alloys and Compounds.DOI
202. Yanchao Zhao, Hangshan Gao, Zhixun Wen, Xuhui Zhang, Y.Q. Yang, Zhufeng Yue (2019). Combined elastic-plastic energy driving criteria of rafting behavior for nickel-based single crystal superalloys. Materials Science and Engineering A.DOI
203. Wenjing Gao, Lei Li, Zhufeng Yue, Honglin Li, Gongnan Xie, Fujuan Tong (2019). Research on the Influence of Guide Blade Trailing Edge Structure on Turbine Performance. Journal of Thermal Science.DOI
204. Chengjiang Zhang, Weibing Hu, Zhixun Wen, Wenwei Tong, Yamin Zhang, Zhufeng Yue, Pengfei He (2019). Creep residual life prediction of a nickel-based single crystal superalloy based on microstructure evolution. Materials Science and Engineering A.DOI
205. Haiqing Pei, Yamin Zhang, Zhixun Wen, Jiapo Wang, Xing Ai, Zhufeng Yue (2019). Crack initiation behavior of a Ni-based SX superalloy under transient thermal stress. Materials Science and Engineering A.DOI
206. Shile Yao, Zhufeng Yue, Xiaoliang Geng, Peiyan Wang (2019). Safety Assessment of Aircraft Fuel Tank Access Cover under the Impact Load by Tire Fragments. Chinese Journal of Mechanical Engineering.DOI
207. Pengfei Wei, Jingwen Song, Sifeng Bi, Matteo Broggi, Michael Beer, Zhenzhou Lü, Zhufeng Yue (2019). Non-intrusive stochastic analysis with parameterized imprecise probability models: II. Reliability and rare events analysis. Mechanical Systems and Signal Processing.DOI
208. Zheng Zhang, Changcong Zhou, Wenxuan Wang, Zhufeng Yue (2019). Optimization design of aeronautical hydraulic pipeline system based on non-probabilistic sensitivity analysis. Proceedings of the Institution of Mechanical Engineers Part O Journal of Risk and Reliability.DOI
209. Yamin Zhang, Zhixun Wen, Haiqing Pei, Zhufeng Yue (2019). Equivalent model of close-packed film cooling holes in nickel-based single crystal cooled blade based on crystallographic theory. Chinese Journal of Aeronautics.DOI
210. Pengfei Wei, Jingwen Song, Sifeng Bi, Matteo Broggi, Michael Beer, Zhenzhou Lü, Zhufeng Yue (2019). Non-intrusive stochastic analysis with parameterized imprecise probability models: I. Performance estimation. Mechanical Systems and Signal Processing.DOI
211. Shouyi Sun, Lei Li, Weizhu Yang, Zhufeng Yue, Huan Wan (2019). RA-based fretting fatigue life prediction method of Ni-based single crystal superalloys. Tribology International.DOI
212. Xiaoliang Geng, Yahui Lu, Chao Liu, Weinan Li, Zhufeng Yue (2019). Fracture characteristic analysis of cellular lattice structures under tensile load. International Journal of Solids and Structures.DOI
213. Wang Yuan-sheng, Chunbo Lan, Qin Wei-Yang, Yue Zhu-feng (2019). Predicting Structure Dynamic Acceleration Based on Measured Strain. Mechanisms and machine science.DOI
214. Shouyi Sun, Yue Zhu-feng, Li Lei, Mengchuang Zhang, Yang Weizhu (2019). Preliminary design of centrifugal compressor using multidisciplinary optimization method. Mechanics & Industry.DOI
215. Pan Wang, Zhenzhou Lu, Kaichao Zhang, Sinan Xiao, Zhufeng Yue (2018). Copula-based decomposition approach for the derivative-based sensitivity of variance contributions with dependent variables. Reliability Engineering & System Safety, Vol. 169.DOI
216. 王文浩，苟文选，王富生，刘伟，岳珠峰（2018）. 某输流管道两种管壁应力作用下的屈曲分析. 《西北工业大学学报》.
217. 闫五柱，赵万嘉，岳珠峰（2018）. 沉积态增材制造过程中的沉积路径影响研究. 《航空科学技术》.
218. 王攀，张磊刚，吕震宙，程蕾，岳珠峰（2018）. 基于Copula函数的失效概率灵敏度分解方法. 《机械工程学报》.
219. 杨白凤，岳珠峰，耿小亮，王佩艳（2018）. 热循环对碳纤维/双马来酰亚胺复合材料的影响. 《实验力学》.
220. 王佩艳，杨白凤，耿小亮，岳珠峰（2018）. 复合材料加筋壁板灵敏度分析及优化设计. 《强度与环境》.
221. 张政，周长聪，戴志豪，任哲先，岳珠峰（2018）. 基于重要性测度降维的液压管路稳健优化设计. 《航空学报》.
222. 刘付超，魏鹏飞，周长聪，张政，岳珠峰（2018）. 含旋转铰间隙平面运动机构可靠性灵敏度分析. 《航空学报》.
223. 陈汉，王富生，贾森清，岳珠峰（2018）. 含冲击损伤复合材料油箱口盖剩余强度研究. 《强度与环境》.
224. Han Chen, Fusheng Wang, Xiong Xiu, Zheng HE, Zhufeng Yue (2018). Plasma discharge characteristics of segmented diverter strips subject to lightning strike. Plasma Science and Technology.DOI
225. 曹刚，甘文艳，刘军，温志勋，岳珠峰（2018）. 带V型缺口圆棒试样三轴应力状态下的蠕变性能. 《热加工工艺》.
226. X.H. Zhang, Hangshan Gao, Zhixun Wen, Haocheng Zhang, Zhufeng Yue (2018). Low Cycle Fatigue Failure Analysis of a Ni‐Based Single Crystal Superalloys at 850 °C. Advanced Engineering Materials.DOI
227. Wenhao Wang, Wenxuan Gou, Fusheng Wang, Wei Liu, Zhufeng Yue (2018). Buckling Analysis on a Pipe Conveying Fluid under Two Stresses. Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University.DOI
228. Ronghai Wu, Zhufeng Yue, Meng Wang (2018). Effect of initial γ/γ′ microstructure on creep of single crystal nickel-based superalloys: A phase-field simulation incorporating dislocation dynamics. Journal of Alloys and Compounds.DOI
229. Zhixun Wen, Yamin Zhang, Zhenwei Li, Zhufeng Yue (2018). Equivalent and simplification of nickel-based single crystal plates with film cooling holes. Aerospace Science and Technology.DOI
230. Weizhu Yang, Qingchang Liu, Zongzhan Gao, Zhufeng Yue, Baoxing Xu (2018). Theoretical search for heterogeneously architected 2D structures. Proceedings of the National Academy of Sciences.DOI
231. Fujuan Tong, Wenxuan Gou, Wenjing Gao, Lei Li, Zhufeng Yue (2018). Numerical Investigation of Impinging-Film Heat Transfer and Flow Characteristics of Turbine Inner Casing.DOI
232. Weizhu Yang, Jia Yang, Yize Dong, Shimin Mao, Zongzhan Gao, Zhufeng Yue, Shen J. Dillon, Hangxun Xu, Baoxing Xu (2018). Probing buckling and post-buckling deformation of hollow amorphous carbon nanospheres: In-situ experiment and theoretical analysis. Carbon.DOI
233. Fan Yang, Zhufeng Yue, Tian Jian Lu (2018). Non-matching meshes data transfer using Kriging model and greedy algorithm. Advances in Engineering Software.DOI
234. Zhixun Wen, Jianwei Liang, Chen-Yu Liu, Haiqing Pei, Shifeng Wen, Zhufeng Yue (2018). Prediction method for creep life of thin-wall specimen with film cooling holes in Ni-based single-crystal superalloy. International Journal of Mechanical Sciences.DOI
235. Qian Li, Wei Liu, Zijun Zhang, Zhufeng Yue (2018). Parametric Resonance of Pipes with Soft and Hard Segments Conveying Pulsating Fluids. International Journal of Structural Stability and Dynamics.DOI
236. Zhixun Wen, Zhenwei Li, Yamin Zhang, Shifeng Wen, Zhufeng Yue (2018). Surface slip deformation characteristics for perforated Ni-based single crystal thin plates with square and triangular penetration patterns. Materials Science and Engineering A.DOI
237. Zhixun Wen, Haiqing Pei, Huan Ping Yang, Yunwu Wu, Zhufeng Yue (2018). A combined CP theory and TCD for predicting fatigue lifetime in single-crystal superalloy plates with film cooling holes. International Journal of Fatigue.DOI
238. Zhongkui Zhang, Zhufeng Yue (2018). TCP phases growth and crack initiation and propagation in nickel-based single crystal superalloys containing Re. Journal of Alloys and Compounds.DOI
239. Haiqing Pei, Zhixun Wen, Zhenwei Li, Yamin Zhang, Zhufeng Yue (2018). Influence of surface roughness on the oxidation behavior of a Ni-4.0Cr-5.7Al single crystal superalloy. Applied Surface Science.DOI
240. 段苗苗，岳珠峰，贾坤荣（2017）. 蜂窝夹层共形承载天线结构的力电性能. 《材料科学与工程学报》.
241. 姚世乐，岳珠峰，耿小亮，王佩艳，刘军（2017）. 铝合金薄板在轮胎碎片冲击作用下的动态响应分析. 《热加工工艺》.
242. 姚世乐，岳珠峰，耿小亮，王佩艳，刘军（2017）. 基于大尺寸轮胎碎片冲击分析的航空铝合金选型研究. 《热加工工艺》.
243. Baifeng Yang, Zhufeng Yue, Xiaoliang Geng, Peiyan Wang (2017). Aging effects of carbon fiber/bismaleimide composite subjected to thermal cycling. 《第二十一届国际复合材料大会摘要集—专题四》.
244. 曹刚，张旭辉，徐涛，刘军，温志勋，岳珠峰（2017）. 镍基单晶合金高温低周疲劳微观损伤及断裂机制. 《热加工工艺》.
245. 曹刚，张浩成，温志勋，岳珠峰（2017）. DZ125定向凝固涡轮叶片不同部位力学性能研究. 《热加工工艺》.
246. 王佩艳，张建敏，岳珠峰，耿小亮，杨浩，王勤超，冯彪（2017）. 航空轮胎爆破防护设计研究. 《力学季刊》.
247. Shile Yao, Zhufeng Yue, Jian‐Min Zhang, Xiaoliang Geng, Peiyan Wang, Hao Yang (2017). Safety Assessment of Protection Cover under the Blast Pressure of Aircraft Tire Blowout. Journal of Aerospace Engineering.DOI
248. Xiaoliang Geng, Liyang Ma, Chao Liu, Zhao Chen, Zhufeng Yue (2017). A FEM study on mechanical behavior of cellular lattice materials based on combined elements. Materials Science and Engineering A.DOI
249. Fan Yang, Zhufeng Yue, Lei Li, Dong Guan (2017). Hybrid reliability-based multidisciplinary design optimization with random and interval variables. Proceedings of the Institution of Mechanical Engineers Part O Journal of Risk and Reliability.DOI
250. Bai‐Feng Yang, Zhufeng Yue, Xiaoliang Geng, Peiyan Wang, Jian Gan, Baohua Liao (2017). Effects of space environment temperature on the mechanical properties of carbon fiber/bismaleimide composites laminates. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
251. Wuzhu Yan, Zhufeng Yue, Jianwen Feng (2017). Study on the role of deposition path in electron beam freeform fabrication process. Rapid Prototyping Journal.DOI
252. Gang Cao, Zhixun Wen, Dashun Liu, Zhufeng Yue (2017). Effect of Secondary Orientation on the Mechanical Behavior of a Unit Cell Model with a Film-cooling Hole in Single Crystal. IOP Conference Series Materials Science and Engineering.DOI
253. Jianwei Liang, Jiapo Wang, Zhixun Wen, Zhufeng Yue (2017). Analysis and prediction of non-isothermal creep behavior in Ni-based single crystal superalloy. Materials Science and Engineering A.DOI
254. Zhixun Wen, Shan Huang, Hangshan Gao, Zhufeng Yue (2017). Experimental investigation on low cycle fatigue properties of GH3536 alloy with film cooling holes in different drilling processes. Engineering Failure Analysis.DOI
255. Wuzhu Yan, Xin Yuan, Wanjia Zhao, Zhufeng Yue (2017). Effect of crystallographic orientation on impression creep behaviors of single crystal based on crystal plasticity theory. Materials Science and Engineering A.DOI
256. Wenjing Gao, Zhufeng Yue, Lei Li, Zhenan Zhao, Fujuan Tong (2017). Numerical simulation on film cooling with compound angle of blade leading edge model for gas turbine. International Journal of Heat and Mass Transfer.DOI
257. Mengchuang Zhang, Wenxuan Gou, Qin Yao, Lei Li, Zhufeng Yue (2017). Investigation on heat transfer characteristic and optimization of the cooling air inlet for the twin-web turbine disk. Journal of Physics Conference Series.DOI
258. Changcong Zhou, Chenghu Tang, Fuchao Liu, Wenxuan Wang, Zhufeng Yue (2017). Regional moment-independent sensitivity analysis with its applications in engineering. Chinese Journal of Aeronautics.DOI
259. Xinting Huang, Zhufeng Yue, Peiyan Wang, Xin Chen, Xiaoliang Geng (2017). Molding process influence on pull-off performance of composite stiffened panels. Fibers and Polymers.DOI
260. Yi Wang, Fusheng Wang, Senqing Jia, Zhufeng Yue (2017). Experimental and numerical studies on the stability behavior of composite panels stiffened by tilting hat-stringers. Composite Structures.DOI
261. Shile Yao, Zhufeng Yue, Xiaoliang Geng, Peiyan Wang (2017). An Experimental Investigation of Pressure Distribution in the Flow Field of Aircraft Radial Tire Blowout. Journal of Aerospace Engineering.DOI
262. Haiqing Pei, Zhixun Wen, Yamin Zhang, Zhufeng Yue (2017). Oxidation behavior and mechanism of a Ni-based single crystal superalloy with single α-Al 2 O 3 film at 1000 °C. Applied Surface Science.DOI
263. Xiaoliang Geng, Fanfan Ji, Jiu Wang, Dou Wang, Peiyan Wang, Zhufeng Yue (2017). Experimental and numerical investigations of compression stability of stiffened composite panel with ply interleaving. Journal of Composite Materials.DOI
264. Haiqing Pei, Zhixun Wen, Zhufeng Yue (2017). Long-term oxidation behavior and mechanism of DD6 Ni-based single crystal superalloy at 1050 °C and 1100 °C in air. Journal of Alloys and Compounds.DOI
265. Weizhu Yang, Qingchang Liu, Zhufeng Yue, Xiaodong Li, Baoxing Xu (2017). Rotation of hard particles in a soft matrix. Journal of the Mechanics and Physics of Solids.DOI
266. Zhixun Wen, Haiqing Pei, Hai Liu, Zhufeng Yue (2016). A Sequential Kriging reliability analysis method with characteristics of adaptive sampling regions and parallelizability. Reliability Engineering & System Safety, Vol. 153.DOI
267. Pengfei Wei, Jingwen Song, Zhenzhou Lu, Zhufeng Yue (2016). Time-dependent reliability sensitivity analysis of motion mechanisms. Reliability Engineering & System Safety, Vol. 149.DOI
268. Weizhu Yang, Zhufeng Yue, Lei Li, Peiyan Wang (2016). Aircraft wing structural design optimization based on automated finite element modelling and ground structure approach. Engineering Optimization, Vol. 480, No. 1.DOI
269. 闫五柱，张嘉振，周振功，岳珠峰（2016）. 镍基单晶合金压痕蠕变研究. 《稀有金属材料与工程》.
270. 史振海，杨未柱，路秀儒，岳珠峰（2016）. 串列式扇翼布局流动特性数值研究. 《航空学报》.
271. 杨彪，郑百林，胡兴健，贺鹏飞，岳珠峰（2016）. 空洞对镍基单晶合金纳米压痕过程的影响. 《金属学报》.
272. 张世明，余金桂，黄泽银，黄荣，刘生发，章桥新，岳珠峰，李雪伍（2016）. DD6单晶合金筏化过程中元素定向迁移行为（英文）. 《稀有金属材料与工程》.
273. 贾森清，王富生，虞跨海，岳珠峰（2016）. 高速火箭弹侵彻过程引信过载特性研究. 《强度与环境》.
274. 高靖云，张成成，侯乃先，任远，李颖，温志勋，岳珠峰（2016）. 考虑应力松弛的单晶涡轮叶片蠕变疲劳寿命预测. 《航空动力学报》.
275. 赵海龙，岳珠峰，刘伟（2016）. 矩独立重要性分析的Kriging代理模型方法. 《航空学报》.
276. 张建敏，岳珠峰，鲁静，王佩艳，耿小亮，杨浩，王勤超，冯彪（2016）. 起落架舱抗爆防护罩工艺选材及验证. 《热加工工艺》.
277. 张建敏，岳珠峰，耿小亮，王佩艳，姚世乐，马小庆（2016）. 航空轮胎爆破气流场测试方法. 《工程爆破》.
278. Zhang Shiming, Jingui Yu, Huang Zeyin, Huang Rong, Shengfa Liu, Zhang Qiaoxin, Yue Zhu-feng, Xuewu Li (2016). Directional Migration Behavior of Alloying Elements in the Rafting Process of the Single Crystal Superalloy DD6. 《稀有金属材料与工程》.DOI
279. Bai‐Feng Yang, Zhufeng Yue, Xiaoliang Geng, Xin Guan, Peiyan Wang (2016). Experimental and numerical study on bearing failure of countersunk composite–composite and composite–steel joints. Journal of Composite Materials.DOI
280. Fan Yang, Zhufeng Yue, Lei Li, Weizhu Yang (2016). Aerodynamic optimization method based on Bezier curve and radial basis function. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
281. Xiaoliang Geng, Dou Wang, Junyan Deng, Fanfan Ji, Zhufeng Yue (2016). Simulation of the orthogonal cutting of OFHC copper based on the smoothed particle hydrodynamics method. The International Journal of Advanced Manufacturing Technology.DOI
282. Anqiang Wang, Liu Lu, Zhixun Wen, Zhenwei Li, Zhufeng Yue (2016). The Influence of Dwell Time on Low Cycle Fatigue Behavior of Ni-base Superalloy IC10. High Temperature Materials and Processes.DOI
283. Zhixun Wen, Dongxu Zhang, Songwei Li, Zhufeng Yue, Jingyun Gao (2016). Anisotropic creep damage and fracture mechanism of nickel-base single crystal superalloy under multiaxial stress. Journal of Alloys and Compounds.DOI
284. Dongfan Li, Hangshan Gao, Zhixun Wen, Zhenwei Li, Zhufeng Yue (2016). The Effect of Post-heat Treatment on the Microstructures of Single Crystal DD6 Superalloy. High Temperature Materials and Processes.DOI
285. Xiaoliang Geng, Dou Wang, Junyan Deng, Zhufeng Yue (2016). Simulation of the cutting sequence of AISI 316L steel based on the smoothed particle hydrodynamics method. The International Journal of Advanced Manufacturing Technology.DOI
286. Dongfan Li, Zhixun Wen, Shaofei Wang, Chenyu Liu, Zhufeng Yue (2016). The Effect of Multi-inclined Holes on the Creep Properties of Nickel-Based Superalloy. High Temperature Materials and Processes.DOI
287. Weizhu Yang, Zhufeng Yue, Lei Li, Fan Yang, Peiyan Wang (2016). Optimization design of unitized panels with stiffeners in different formats using the evolutionary strategy with covariance matrix adaptation. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
288. Mengchuang Zhang, Wenxuan Gou, Lei Li, Fan Yang, Zhufeng Yue (2016). Multidisciplinary design and multi-objective optimization on guide fins of twin-web disk using Kriging surrogate model. Structural and Multidisciplinary Optimization.DOI
289. Fusheng Wang, Senqing Jia, Yi Wang, Zhufeng Yue (2016). Impact Response Study on Covering Cap of Aircraft Big-Size Integral Fuel Tank. Applied Composite Materials.DOI
290. Weizhu Yang, Zhufeng Yue, Baoxing Xu (2016). A hybrid elastomeric foam-core/solid-shell spherical structure for enhanced energy absorption performance. International Journal of Solids and Structures.DOI
291. Weizhu Yang, Shimin Mao, Jia Yang, Tao Shang, Hongguang Song, James C. Mabon, Wacek Swiech, John R. Vance, Zhufeng Yue, Shen J. Dillon, Hangxun Xu, Baoxing Xu (2016). Large-deformation and high-strength amorphous porous carbon nanospheres. Scientific Reports.DOI
292. Hailong Zhao, Zhufeng Yue, Yongshou Liu, Wei Liu, Zongzhan Gao (2016). Structural reliability assessment based on low-discrepancy adaptive importance sampling and artificial neural network. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
293. Bai‐Feng Yang, Zhufeng Yue, Xiaoliang Geng, Peiyan Wang (2016). Temperature effects on transverse failure modes of carbon fiber/bismaleimides composites. Journal of Composite Materials.DOI
294. Wenhao Wang, Wenxuan Gou, Fusheng Wang, Jiu Wang, Zhufeng Yue (2016). Effects of connective parts on stability of folded stringers stiffened composite panel. Composite Structures.DOI
295. Fan Yang, Zhufeng Yue, Lei Li (2016). The aeroelastic characteristics of high aspect ratio wing. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
296. Biao Yang, Bailin Zheng, Xingjian Hu, Kai Zhang, Yong Li, Pengfei He, Zhufeng Yue (2016). Atomistic simulation of nanoindentation on incipient plasticity and dislocation evolution in γ/γ′ phase with interface and void. Computational Materials Science.DOI
297. Zhixun Wen, Haiqing Pei, Baizhi Wang, Dongxu Zhang, Zhufeng Yue (2016). The tension/compression asymmetry of a high γ′ volume fraction Nickel-based single-crystal superalloy. Materials at High Temperatures.DOI
298. 赵海龙，岳珠峰，刘伟（2015）. 变量相关情况下基于响应面进行全局灵敏度分析的半解析法. 《中国力学大会-2015论文摘要集》.
299. 谯盛军，高行山，张钧然，王富生，岳珠峰（2015）. 飞机系统包装运输快速优化布置研究. 《航空计算技术》.
300. 杨帆，岳珠峰，李磊（2015）. 基于弧长法的加筋板后屈曲特性分析及试验. 《应用力学学报》.
301. 徐涛，高行山，温志勋，岳珠峰（2015）. 镍基单晶高温合金热机械疲劳本构模型研究. 《稀有金属材料与工程》.
302. 刘畅，岳珠峰，耿小亮，王佩艳，李德勇（2015）. PMI复合材料泡沫夹层结构小能量冲击后回弹规律研究. 《实验力学》.
303. 卢绪平，温志勋，岳珠峰，张晓兵（2015）. 镍基单晶气膜孔模拟试样的低周疲劳断裂机理. 《稀有金属材料与工程》.
304. 张钧然，王富生，岳珠峰（2015）. 基于CFD/CSD耦合技术的复合材料机翼操纵效率分析. 《强度与环境》.
305. 王少飞，温志勋，郜玉芬，刘海，岳珠峰（2015）. 配合间隙对涡轮叶片榫头/榫槽接触的影响. 《推进技术》.
306. 刘志强，岳珠峰，王富生，姬尧尧（2015）. 不同防护形式复合材料板雷击损伤分区特性. 《复合材料学报》.
307. 钟安彪，岳珠峰，耿小亮，王犇（2015）. 错位铺层拼接层合板力学性能分析与模拟方法探索. 《固体力学学报》.
308. 温志勋，裴海清，王少飞，李振威，岳珠峰（2015）. 长期时效对镍基单晶合金微结构演化和拉伸性能的影响（英文）. 《稀有金属材料与工程》.
309. 王佰智，温志勋，刘大顺，岳珠峰（2015）. 镍基单晶高温合金沉淀相尺度效应研究. 《稀有金属材料与工程》.
310. 梁建伟，温志勋，岳珠峰（2015）. 倾角对含气膜孔镍基单晶试件的蠕变损伤影响的数值模拟（英文）. 《稀有金属材料与工程》.
311. 张冬旭，温志勋，岳珠峰（2015）. 应变速率及温度对GH3230镍基高温合金力学性能的影响（英文）. 《稀有金属材料与工程》.
312. 闫五柱，张嘉振，周振功，岳珠峰（2015）. 基于晶体塑性理论的晶界压痕行为研究. 《金属学报》.
313. Dongxu Zhang, Wen Zhixun, Yue Zhu-feng (2015). Effects of Strain Rate and Temperature on Mechanical Property of Nickel-based Superalloy GH3230. 《稀有金属材料与工程》.DOI
314. Liang Jianwei, Wen Zhixun, Yue Zhu-feng (2015). Numerical Simulation on the Creep Damage Evolution of Nickel-Based Single Crystal Specimens with Slant-Angled Film Cooling Holes. 《稀有金属材料与工程》.DOI
315. Wen Zhixun, Pei Haiqing, Shaofei Wang, Zhenwei Li, Yue Zhu-feng (2015). Effects of Long-Term Aging on the Microstructures and Tensile Properties of Ni-Based Single Crystal Superalloy. 《稀有金属材料与工程》.DOI
316. Mengchuang Zhang, Wenxuan Gou, Lei Li, Xinmei Wang, Zhufeng Yue (2015). Multidisciplinary design and optimization of the twin-web turbine disk. Structural and Multidisciplinary Optimization.DOI
317. Zhixun Wen, Haiqing Pei, Dongfan Li, Zhufeng Yue, Jingyun Gao (2015). Thickness Influence on the Creep Response of DD6 Ni-Based Single-Crystal Superalloy. High Temperature Materials and Processes.DOI
318. Jianwei Liang, Xing Ai, Zhixun Wen, Zhufeng Yue (2015). Experimental investigation on low cycle fatigue of DZ125 with film cooling holes in different processes of laser drilling. Engineering Failure Analysis.DOI
319. Wuzhu Yan, Zhufeng Yue, Jiazhen Zhang (2015). Study on the residual stress and warping of stiffened panel produced by electron beam freeform fabrication. Materials & Design.DOI
320. Jun Liu, Jing Lu, Xing Wang, Xiaosen Wang, Zhufeng Yue (2015). Corrosion fatigue performance of TC4 plates with holes in aviation kerosene. Aerospace Science and Technology.DOI
321. Chengjiang Zhang, Weibing Hu, Zhixun Wen, Haocheng Zhang, Zhufeng Yue (2015). Influence of hot isostatic pressing on fatigue performance of K403 nickel-based superalloy. Journal of Alloys and Compounds.DOI
322. H. C. Zhang, Anqiang Wang, Zhixun Wen, Zhufeng Yue, Chengjiang Zhang (2015). Effects of Hot Isostatic Pressing (HIP) on Microstructure and Mechanical Properties of K403 Nickel-Based Superalloy. High Temperature Materials and Processes.DOI
323. Xinhong Xiong, Pengdan Dai, Dun Miao Quan, Zhiping Wang, Qiaoxin Zhang, Zhufeng Yue (2015). Intermediate temperature brittleness and directional coarsening behavior of nickel-based single-crystal superalloy DD6. Materials & Design.DOI
324. Xinhong Xiong, Dun Miao Quan, Pengdan Dai, Zhiping Wang, Qiaoxin Zhang, Zhufeng Yue (2015). Tensile behavior of nickel-base single-crystal superalloy DD6. Materials Science and Engineering A.DOI
325. Langquan Shui, Zhufeng Yue, Yongshou Liu, Qingchang Liu, Jiaojiao Guo, Xindang He (2015). Novel composites with asymmetrical elastic wave properties. Composites Science and Technology.DOI
326. Lizhou Li, Jun Zhang, Junli Zhao, Zhufeng Yue (2015). An enhanced 3D data transfer method for fluid–structure interface by ISOMAP nonlinear space dimension reduction. Advances in Engineering Software.DOI
327. Zhiqiang Liu, Junping Shi, Fusheng Wang, Zhufeng Yue (2015). Normal contact stiffness of the elliptic area between two asperities. Acta Mechanica Solida Sinica.DOI
328. Fujuan Tong, Wenxuan Gou, Lei Li, Qingchang Liu, Zhufeng Yue, Gongnan Xie (2015). Investigation on heat transfer of a rotor blade tip with various film cooling holes arrangements and groove depths. Advances in Mechanical Engineering.DOI
329. Xindang He, Zongzhan Gao, Xiaoliang Geng, Zhufeng Yue (2015). Structural Robust Optimal Design based on Orthogonal Experimental and Parametric Finite Element Analysis. MATEC Web of Conferences.DOI
330. Zhou Changcong, Lü Zhenzhou, Feng Zhang, Yue Zhu-feng (2015). An adaptive reliability method combining relevance vector machine and importance sampling. Structural and Multidisciplinary Optimization.DOI
331. 余知朴，岳珠峰，刘伟（2014）. 虚拟风场中运输机舱门电液控制系统分析研究. 《系统仿真学报》.DOI
332. 刘军，朱星名，胡伯仁，岳珠峰（2014）. 基于超声引导法的薄层化碳纤维性能研究. 《热加工工艺》.
333. 王富生，王佩艳，姬尧尧，刘志强，岳珠峰 (2014). Mechanical property of single-bolted composite laminates. Journal of Central South University.
334. 岳珠峰（2014）. 飞机舱门系统可靠性分析、设计与实验. 《科学出版社》.
335. 胡腾越，郑百林，胡牧原，贺鹏飞，岳珠峰（2014）. 纳米压痕中位错运动的原子模拟. 《力学季刊》.
336. 王帅培，高行山，甘建，王富生，岳珠峰（2014）. 飞机复合材料气密舱门布局和铺层的两级优化设计. 《应用力学学报》.
337. 钟安彪，岳珠峰，耿小亮，王犇，黄剑贤，梁恒亮（2014）. 复合材料后压力框加筋元件双轴拉伸试验与模拟. 《实验力学》.
338. 张中奎，岳珠峰，温志勋，王佰智，刘大顺（2014）. GH4720合金涡轮盘榫槽模拟件疲劳性能研究(英文). 《稀有金属材料与工程》.
339. 王佰智，刘大顺，温志勋，岳珠峰（2014）. 镍基单晶高温合金[111]取向拉压不对称分析. 《稀有金属材料与工程》.
340. 刘浩，王心美，刘大顺，温志勋，岳珠峰（2014）. 缺口对GH3536镍基高温合金蠕变性能的影响. 《稀有金属材料与工程》.
341. 毛焕泽，温志勋，王佰智，岳珠峰（2014）. 晶体随机取向对单晶切口试样尖端滑移特性的影响. 《稀有金属材料与工程》.
342. 解鹏飞，元辛，慕仙莲，温世峰，李磊，岳珠峰（2014）. 有机硅环氧涂层/LY12铝合金在海水中电化学腐蚀行为. 《腐蚀与防护》.
343. 余知朴，岳珠峰，刘永寿，刘伟（2014）. 飞行环境下飞机货舱门电液系统的开启功能分析. 《机械工程学报》.
344. 艾兴，高行山，温志勋，刘大顺，岳珠峰（2014）. DD6镍基单晶合金气膜孔薄壁平板高温蠕变性能. 《航空动力学报》.
345. 杨未柱，岳珠峰，王富生（2014）. 结构参数对飞机高平尾振动模态局部化的影响. 《应用力学学报》.
346. 郜玉芬，胡卫兵，温志勋，岳珠峰，陈龙（2014）. 镍基单晶合金涡轮叶片榫头裂纹尖端应力场及扩展趋势. 《航空动力学报》.
347. 高波，赵彬，甘建，王富生，岳珠峰（2014）. 飞机复合材料起落架舱门优化设计. 《航空计算技术》.
348. 元辛，岳珠峰，温世峰，李磊（2014）. 铝合金表面有机硅环氧涂层的腐蚀电化学行为. 《中国腐蚀与防护学报》.
349. 张冬旭，温志勋，岳珠峰（2014）. GH3230高温合金热变形行为及本构模型研究. 《稀有金属》.
350. 胡兴健，郑百林，杨彪，胡腾越，余金桂，贺鹏飞，岳珠峰（2014）. 压头对Ni基单晶合金纳米压痕结果的影响. 《材料科学与工程学报》.
351. 姬尧尧，王富生，岳珠峰，刘志强（2014）. 金属聚合物复合材料的电树枝生长模拟. 《航空学报》.
352. Zhongkui Zhang, Yue Zhu-feng, Wen Zhixun, Baizhi Wang, Dashun Liu (2014). Study on Fatigue Properties of Turbine Disk Groove Modeling Specimens of GH4720 Alloy. 《稀有金属材料与工程》.DOI
353. Xufeng Yang, Yongshou Liu, Yishang Zhang, Zhufeng Yue (2014). Probability and convex set hybrid reliability analysis based on active learning Kriging model. Applied Mathematical Modelling.DOI
354. Xufeng Yang, Yongshou Liu, Yishang Zhang, Zhufeng Yue (2014). Hybrid reliability analysis with both random and probability-box variables. Acta Mechanica.DOI
355. Hailong Zhao, Zhufeng Yue, Yongshou Liu, Zongzhan Gao, Yishang Zhang (2014). An efficient reliability method combining adaptive importance sampling and Kriging metamodel. Applied Mathematical Modelling.DOI
356. Fan Yang, Zhufeng Yue (2014). Kernel density estimation of three-parameter Weibull distribution with neural network and genetic algorithm. Applied Mathematics and Computation.DOI
357. Miaomiao Duan, Zhufeng Yue, Qianguang Song (2014). Investigation of damage to thick composite laminates under low-velocity impact and frequency-sweep vibration loading conditions. Advances in Mechanical Engineering.DOI
358. Langquan Shui, Zhufeng Yue, Yongshou Liu, Qingchang Liu, Jiaojiao Guo (2014). One-dimensional linear elastic waves at moving property interface. Wave Motion.DOI
359. Jingui Yu, Qiaoxin Zhang, Rong Liu, Zhufeng Yue, Mingkai Tang, Xuewu Li (2014). Molecular dynamics simulation of crack propagation behaviors at the Ni/Ni 3 Al grain boundary. RSC Advances.DOI
360. Yishang Zhang, Yongshou Liu, Xufeng Yang, Zhufeng Yue (2014). A global nonprobabilistic reliability sensitivity analysis in the mixed aleatory–epistemic uncertain structures. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
361. Fusheng Wang, Shihui Huo, Shengjun Qiao, Junran Zhang, Zhufeng Yue (2014). An effective computer modelling approach to the study of aeroelastic characteristics of an aircraft composite wing with high aspect ratio. Mathematical and Computer Modelling of Dynamical Systems.DOI
362. Dashun Liu, Zhixun Wen, Zhufeng Yue (2014). Creep damage mechanism and γ′-phase morphology of a V-notched round bar in Ni-based single crystal superalloys. Materials Science and Engineering A.DOI
363. Jingui Yu, Qiaoxin Zhang, Zhufeng Yue (2014). Tensile mechanical properties of Ni 3 Al nanowires at intermediate temperature. RSC Advances.DOI
364. Peiyan Wang, Shile Yao, Xinmei Wang, Zhufeng Yue (2014). Experimental Research and Numerical Simulation of Wing Boxes under Pure Bending Load. Advances in Mechanical Engineering.DOI
365. 胡腾越，郑百林，贺鹏飞，岳珠峰（2013）. 压头速度对Ni3Al纳米压痕过程影响的数值仿真. 《计算机辅助工程》.
366. 段苗苗，耿小亮，张永久，黄剑贤，岳珠峰（2013）. 孔挤压过程中孔边应力应变演化规律的试验与模拟研究. 《工程力学》.
367. Shihui Huo, Zhe Jun Yuan, Fusheng Wang, Zhufeng Yue (2013). Effects of static aeroelasticity on composite wing characteristics under different flight attitudes. Journal of Central South University.DOI
368. 刘志强，岳珠峰，王晓森，王富生（2013）. 典型加筋壁板纯剪切工况有限元模拟. 《机械强度》.DOI
369. 李磊，侯乃先，敖良波，王心美，岳珠峰（2013）. 不同孔间距下镍基单晶叶片气膜孔弹塑性行为研究. 《稀有金属材料与工程》.
370. 闫五柱，高行山，岳珠峰（2013）. 应力松弛法确定材料蠕变参数. 《稀有金属材料与工程》.
371. 刘志群，岳珠峰，支希哲，侯乃先（2013）. 单晶冷却叶片强度与疲劳寿命的尺寸效应研究. 《稀有金属材料与工程》.
372. 黄剑贤，耿小亮，张永久，段苗苗，岳珠峰，甘建（2013）. 错位铺层拼接层合板承载机制的试验与模拟研究. 《应用力学学报》.
373. 张冬旭，刘大顺，朱西平，温志勋，岳珠峰，陆波（2013）. GH3230高温合金氩弧焊接接头的组织与高温性能. 《机械工程材料》.
374. 张永久，耿小亮，甘建，岳珠峰（2013）. 考虑损伤和界面脱粘的复合材料加筋板稳定性试验与模拟研究. 《应用力学学报》.
375. 王佩艳，李晓宇，岳珠峰（2013）. 泡沫增强玻璃纤维夹芯复合材料疲劳性能研究和仿真分析. 《中国力学大会——2013论文摘要集》.
376. 李磊，李立州，敖良波，周啟涛，岳珠峰（2013）. 基于曲率优化的14参数平面叶栅设计方法. 《推进技术》.
377. 敖良波，李磊，王宇魁，岳珠峰（2013）. 局部冷却特征对高温合金叶片强度影响规律的研究. 《热加工工艺》.
378. Liu Zhiqun, Yue Zhu-feng, Zhi Xi-zhe, Hou Naixian (2013). Influence of Dimension Variation on Strength and Fatigue Life of Single Crystal Cooled Blade. 《稀有金属材料与工程》.DOI
379. Zhixun Wen, Huanze Mao, Zhufeng Yue, Baizhi Wang (2013). The Influence of Crystal Orientation on Vibration Characteristics of DD6 Nickel-Base Single Crystal superalloy Turbine Blade. Journal of Materials Engineering and Performance.DOI
380. Hongbo Zhai, Ziyan Wu, Yongshou Liu, Zhufeng Yue (2013). The dynamic reliability analysis of pipe conveying fluid based on a refined response surface method. Journal of Vibration and Control.DOI
381. Jun Liu, Henggui Wu, Jinjie Yang, Zhufeng Yue (2013). Effect of edge distance ratio on residual stresses induced by cold expansion and fatigue life of TC4 plates. Engineering Fracture Mechanics.DOI
382. Xiukai Yuan, Zhenzhou Lü, Changcong Zhou, Zhufeng Yue (2013). A novel adaptive importance sampling algorithm based on Markov chain and low-discrepancy sequence. Aerospace Science and Technology.DOI
383. Hongbo Zhai, Ziyan Wu, Yongshou Liu, Zhufeng Yue (2013). In-plane dynamic response analysis of curved pipe conveying fluid subjected to random excitation. Nuclear Engineering and Design.DOI
384. Peiyan Wang, Yin Lei, Zhufeng Yue (2013). Experimental and numerical evaluation of the flexural properties of stitched foam core sandwich structure. Composite Structures.DOI
385. Yue Zhu-feng (2013). Dynamic response of a composite reinforced panel to bird Strike. Zhendong yu chongji.
386. Jianxiong Kang, Gao Hangshan, Wang Fusheng, Yue Zhu-feng (2013). Effect of Detail Design on Fatigue Performance of Aircraft Door Frame. Advances in Mechanical Engineering.DOI
387. Yue Zhu-feng (2013). Comprehensive optimization design of a composite radome for its anti-bird strike and electromagnetic performance. Zhendong yu chongji.
388. 张屹尚，刘永寿，赵彬，岳珠峰（2012）. 基于Kriging模型的充液管道共振非概率可靠性分析. 《振动工程学报》.
389. 李元生，于明，敖良波，岳珠峰（2012）. 基于热流体动力润滑分析的滑动轴承平衡位置和动力特性系数研究(英文). Transactions of Nanjing University of Aeronautics and Astronautics.
390. 李宝辉，高行山，刘永寿，岳珠峰（2012）. 含有非均匀轴向流的输液管道自由振动分析. 《机械科学与技术》.
391. Fusheng Wang, Junran Zhang, Peiyan Wang, Shihui Huo, Zhufeng Yue (2012). Reliability analysis of laminated composite under compression and shear loads. Journal of Central South University.DOI
392. 邹学锋，王安强，刘永寿，翟红波，岳珠峰（2012）. 基于改进粒子群算法的管道动强度可靠性优化设计. 《航空制造技术》.
393. 于明，刘永寿，李磊，岳珠峰（2012）. 基于可靠性的飞机风挡抗鸟撞优化设计. 《航空制造技术》.
394. 何勇，刘永寿，曹刚，岳珠峰（2012）. 风载和冲击载荷下系留塔强度可靠性灵敏度分析. 《航空制造技术》.
395. 刘志群，周红，刘伟，岳珠峰（2012）. 某型飞机舱门锁机构卡滞可靠性分析. 《机械设计》.
396. 张峰，唐樟春，任昊，岳珠峰（2012）. 含间隙曲柄滑块机构可靠性灵敏度分析. 《机械设计》.
397. 虞跨海，杨茜，岳珠峰（2012）. 变壁厚涡轮冷却叶片参数化造型设计. 《机械设计》.
398. 刘伟，刘志群，赵晓博，席宝安，岳珠峰（2012）. 飞机舱门密封结构的气密可靠性研究. 《材料工程》.
399. 于明，刘永寿，李磊，王新军，岳珠峰（2012）. 基于MDO方法的离心式压气机设计系统. 《机械强度》.
400. 李磊，敖良波，王心美，岳珠峰（2012）. 航空发动机涡轮动叶设计平台的构建与验证. 《航空发动机》.
401. 翟红波，吴子燕，李宝辉，刘永寿，岳珠峰（2012）. 含非均匀轴向流的输液管道共振可靠性灵敏度分析. 《固体力学学报》.
402. 吴国夫，朱西平，高宗战，岳珠峰（2012）. 蠕变载荷下有机玻璃银纹萌生及损伤研究. 《航空材料学报》.
403. 张中奎，王佰智，刘大顺，温志勋，岳珠峰（2012）. DD6单晶合金蠕变特性及断裂机理. 《材料科学与工程学报》.
404. 虞跨海，杨茜，岳珠峰（2012）. 高压涡轮冷却叶片叶顶结构气动与传热. 《推进技术》.
405. 邓晓涛，高行山，张奔，岳珠峰（2012）. 基于有限单元法的液体晃荡数值模拟. 《机械设计与制造》.
406. 袁修开，吕震宙，岳珠峰（2012）. 小样本下分位数函数的Bootstrap置信区间估计. 《航空学报》.
407. 于明，刘永寿，李磊，李元生，岳珠峰（2012）. 基于双循环的离心叶轮多学科可靠性优化设计. 《航空学报》.
408. 刘大顺，王佰智，韩建锋，温志勋，岳珠峰（2012）. DD6单晶冷却涡轮叶片模拟试样拉伸性能. 《稀有金属材料与工程》.
409. 张峰，唐樟春，刘永寿，岳珠峰（2012）. 基于分层抽样法的可靠性灵敏度分析. 《计算力学学报》.
410. 王富生，张钧然，霍世慧，岳珠峰（2012）. 大开口复合材料加筋壁板稳定性分析. 《应用力学学报》.
411. 王富生，谯盛军，华林，岳珠峰（2012）. 复合材料双曲度大网格高精度单元研究. 《复合材料学报》.
412. 王晓森，高行山，孙贤，韩鹍，岳珠峰（2012）. 冷挤压对钛合金紧固结构件的耐久性影响研究. 《机械科学与技术》.
413. 李立州，李磊，王心美，岳珠峰（2012）. 基于名称标识的多学科数据链构成方法. 《航空动力学报》.
414. 赵辉，温志勋，岳珠峰（2012）. 离散叉排肋化内冷通道流动与传热的数值模拟. 《机械强度》.
415. 董永朋，霍世慧，华林，王富生，岳珠峰（2012）. 复合材料机翼刚心轴线影响因素分析. 《航空制造技术》.
416. 李元生，任昊，温志勋，岳珠峰（2012）. 基于可靠性的弹性折叠机构设计优化方法研究. 《强度与环境》.
417. 李宝辉，高行山，刘永寿，鲁华平，岳珠峰（2012）. 输液曲管平面内振动的波动方法研究. 《固体力学学报》.
418. Shifeng Wen, Xianlian Mu, Xin Yuan, Zhufeng Yue (2012). Investigation of bending creep tests. Part I: Effect of residual stress. Measurement.DOI
419. Yangjun Luo, Zhan Kang, Zhufeng Yue (2012). Maximal Stiffness Design of Two-Material Structures by Topology Optimization with Nonprobabilistic Reliability. AIAA Journal.DOI
420. Xiong Fang, Wuzhu Yan, Hangshan Gao, Zhufeng Yue, Jun Liu, Fusheng Wang (2012). Finite element simulation of surface deformation of polycrystal with a rough surface under repeated load. Finite Elements in Analysis and Design.DOI
421. Baohui Li, Hangshan Gao, Yongshou Liu, Yue Zhu-feng (2012). Transient response analysis of multi-span pipe conveying fluid. Journal of Vibration and Control.DOI
422. Baohui Li, Gao Hangshan, Liu Yongshou, Yue Zhu-feng (2012). Free vibration analysis of micropipe conveying fluid by wave method. Results in Physics.DOI
423. Yue Zhu-feng (2012). Reliability-based Multidisciplinary Design Optimization of Centrifugal Impeller with Double-loop Strategy. Acta Aeronautica Et Astronautica Sinica.
424. Yue Zhu-feng (2012). Research on composite double-curved element with big grid and high precision. Fuhe cailiao xuebao.
425. Yue Zhu-feng (2012). Reliability sensitivity analysis for slider-crank mechanism with clearance. Journal of Machine Design.
426. Yue Zhu-feng (2012). Seizure reliability analysis of lock machine for aircraft hatch door. Journal of Machine Design.
427. Yue Zhu-feng (2012). Dynamic response analysis for damage of a composite radome due to bird striking based on fluid-solid coupling method. Zhendong yu chongji.
428. Yue Zhu-feng (2012). Stratified sampling algorithm based reliability sensitivity. Jisuan lixue xuebao.
429. Yue Zhu-feng (2012). Non-probabilistic reliability analysis on resonance of fluid-filled pipeline based on Kriging model.
430. Yue Zhu-feng (2012). Parameterized molding design for variable thickness cooling turbine blade. Journal of Machine Design.
431. Yue Zhu-feng (2012). Camber Modeling Method for Centrifugal Blade Profile Design Based on z-θ Rule.
432. Yue Zhu-feng (2012). Analysis of resonance reliability for a simply supported pipe conveying fluid. Zhendong yu chongji.
433. Yue Zhu-feng (2012). Tip Flow and Heat Transfer Prediction of Cooling Blade with Dirt Purge Holes.
434. Yue Zhu-feng (2012). Establishment and Verification of Aeroengine Turbine Rotor Blade Design Platform. Aeroengine.
435. 何新党，刘永寿，高宗战，岳珠峰（2011）. 基于PCL的导弹吊挂强度分析的参数化方法. 《航空计算技术》.
436. 翟红波，刘军，刘永寿，岳珠峰（2011）. 连接方式对紧固孔疲劳性能的影响. 《机械强度》.
437. 李磊，李元生，敖良波，王新军，岳珠峰（2011）. 基于NURBS离心式压气机参数化造型设计及气动优化. 《机械强度》.
438. 韩建锋，朱西平，温志勋，岳珠峰（2011）. 镍基单晶合金基体相γ在不同应力状态蠕变的扩散分析. 《热加工工艺》.
439. 邵辉成，康建雄，刘庆华，岳珠峰（2011）. 焊缝余高对焊接接头疲劳性能影响的定量分析. 《热加工工艺》.
440. 朱江辉，王富生，王安强，岳珠峰（2011）. 大展弦比复合材料机翼静气动弹性参数分析. 《机械设计与制造》.
441. 罗阳军，王彦飞，岳珠峰（2011）. 双材料结构非概率可靠性拓扑优化设计. 《机械工程学报》.
442. 李磊，李元生，于明，敖良波，岳珠峰（2011）. 离心式压气机耦合松弛多学科设计优化方法. 《推进技术》.
443. 贺谦，李元生，敖良波，温志勋，岳珠峰（2011）. 基于单循环方法的涡轮叶片可靠性及多学科设计优化. 《推进技术》.
444. 翟红波，刘永寿，李宝辉，吴子燕，岳珠峰（2011）. 基于动强度可靠性的输流管道动力优化设计. 《西北工业大学学报》.
445. 谯盛军，王富生，赵彬，岳珠峰（2011）. 纵横加筋对复合材料单元在大网格下高精度计算的影响. 《材料工程》.
446. 岳珠峰（2011）. 飞机复合材料结构分析与优化设计. 《科学出版社》.
447. 罗阳军，高宗战，岳珠峰，吴子燕（2011）. 随机-有界混合不确定性下结构可靠性优化设计. 《航空学报》.
448. 董永朋，王佩艳，刘洋，王富生，岳珠峰（2011）. 基于三维等效弹性模量的复合材料中厚层合板稳定性分析. 《材料科学与工程学报》.
449. 刘华峰，赵凯辉，王佩艳，岳珠峰（2011）. 缝合复合材料泡沫夹层结构侧压剪切力学性能试验研究. 《郑州大学学报(工学版)》.
450. 周红，刘永寿，高宗战，岳珠峰（2011）. 某型导弹舱段连接结构强度可靠性灵敏度分析. 《固体火箭技术》.
451. 姚世乐，王安强，方雄，岳珠峰（2011）. 两种新型航空铝合金平面应变断裂韧性KIC研究. 《热加工工艺》.
452. 李宝辉，高行山，刘永寿，岳珠峰（2011）. 变截面输液管道流固耦合振动特性研究. 《机械科学与技术》.
453. 刘洋，王富生，岳珠峰（2011）. 基于等效刚度矩阵的T型加筋层合板有限元分析. 《机械强度》.
454. 董永朋，王佩艳，王富生，岳珠峰（2011）. 考虑稳定性的复合材料机翼盒段优化分析. 《机械设计与制造》.
455. Fusheng Wang, Shihui Huo, Zhufeng Yue, Wei Qian (2011). Further study on aeroelastic response of aircraft wing with freeplay. Journal of Vibration and Control.DOI
456. Hongbo Zhai, Ziyan Wu, Yongshou Liu, Zhufeng Yue (2011). Dynamic response of pipeline conveying fluid to random excitation. Nuclear Engineering and Design.DOI
457. Lu Huaping, Purong Jia, Yongshou Liu, Yingjun Lv, Zhufeng Yue (2011). Dynamic response test and analysis of a typical aviation pipeline. International Conference on Mechanic Automation and Control Engineering.DOI
458. Baohui Li, Hangshan Gao, Hongbo Zhai, Yongshou Liu, Zhufeng Yue (2011). Free vibration analysis of multi-span pipe conveying fluid with dynamic stiffness method. Nuclear Engineering and Design.DOI
459. Yuansheng Li, Lei Li, Ming Yu, Yue Zhu-feng (2011). Adaptive Multi-Objective Optimum Design of Journal Bearing Based on a Back-Stepping Approach. Tribology Transactions.DOI
460. L Yongshou, H Xindang, Zhi You-hai, Yue Zhu-feng (2011). Dynamical strength and design optimization of pipe-joint system under pressure impact load. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering.DOI
461. Yue Zhu-feng (2011). Spring analogy method for generating of 2D unstructured dynamic meshes. Zhendong yu chongji.
462. Yue Zhu-feng (2011). The parameters of aeroelastic characteristics analysis of high-aspect-ratio composite wings using nastran. Machinery Design and Manufacture.
463. Yue Zhu-feng (2011). Influence of Stiffener on High Precision Calculation Using Big Grid Composite Element. Cailiao gongcheng.
464. Yue Zhu-feng (2011). Energy conversion and residual stress distribution in shot peening process. Zhendong yu chongji.
465. Yue Zhu-feng (2011). Analysis of Stability of Moderately Thick Composite Laminates Based on Three-dimensional Effective Elastic Modulus. Cailiao kexue yu gongcheng xuebao.
466. Yue Zhu-feng (2011). Failure model analysis and simulation of laminated composite plate under hailstone impacting. Zhendong yu chongji.
467. Yue Zhu-feng (2011). Diffusing Analysis of Matrix γ in Nickel-base Single Crystal Superalloy During Different Stress Creep. Rejiagong gongyi.
468. Yue Zhu-feng (2011). Analysis on strength reliability and parameter sensitivity of a missile cabin structure. Journal of Solid Rocket Technology.
469. Yue Zhu-feng (2011). PCL-based Parameter Method for Structural Strength Analysis of Missile Hanging. Aeronautical Computing Technique.
470. Yue Zhu-feng (2011). Multidisciplinary Design Optimization of Cooling Turbine Blade Profiles Based on Surrogate Model.
471. Yue Zhu-feng (2011). Comparison of Three Electromagnetic Simulation Methods of Variable Wall Thickness Radome. Aeronautical Computing Technique.
472. Yue Zhu-feng (2011). Optimization analysis on box of composite wing based on stability. Machinery Design and Manufacture.
473. Yue Zhu-feng (2011). Non-probabilistic Reliability Based Topology Optimization Design of Two-material Structures.
474. YU Kua-hai, Yue Zhu-feng (2011). Numerical Simulation of the Fluid/heat Coupling in Return Flow Type Cooling Blades. Journal of Engineering for Thermal Energy and Power.
475. Yue Zhu-feng (2011). Numerical Study on Pin Load Distribution of Scarfed Lap Joint of Airfoil. Science Technology and Engineering.
476. 朱振涛，王佩艳，王富生，岳珠峰（2010）. 复合材料层合板拉压和面内剪切性能的分散性实验研究. 《材料工程》.
477. 温志勋，侯乃先，岳珠峰（2010）. 含铸造微孔镍基单晶合金蠕变损伤和裂纹萌生的模拟计算. 《稀有金属材料与工程》.
478. 王佩艳，王富生，朱振涛，岳珠峰（2010）. 复合材料机械连接件的三维累积损伤研究. 《机械强度》.DOI
479. 王晓森，刘庆华，王宇魁，岳珠峰（2010）. Ti-6Al-4V钛合金紧固孔件原始疲劳质量评定和符合性检查. 《热加工工艺》.
480. 虞跨海，岳珠峰，杨茜（2010）. 涡轮冷却叶片气动与传热设计优化. 《计算力学学报》.
481. 华林，张娟，朱江辉，王富生，岳珠峰（2010）. 一种应用于双曲度复合材料层合板的应力修正方法. 《航空计算技术》.
482. 赵海龙，高宗战，刘伟，岳珠峰（2010）. 复合材料与金属榫槽粘接结构强度可靠性分析. 《机械设计》.
483. 贺谦，李元生，温志勋，岳珠峰（2010）. 涡轮叶片多学科可靠性及稳健设计优化. 《推进技术》.
484. 王佩艳，董永朋，王富生，岳珠峰（2010）. 大展弦比复合材料机翼分区分级优化. 《复合材料：创新与可持续发展(下册)》.
485. 王富生，岳珠峰，张红运（2010）. 基于三维模型的复合材料层合板单钉螺栓连接件力学性能分析. 《航空制造技术》.
486. 王佩艳，王富生，岳珠峰（2010）. 石英纤维布氰酸酯树脂基复合材料的环境试验性能研究. 《实验力学》.
487. 贺谦，李元生，温志勋，岳珠峰（2010）. 基于分解策略的涡轮叶片可靠性及多学科设计优化. 《航空动力学报》.
488. 邓丁元，高行山，虞跨海，岳珠峰（2010）. 椭圆形扰流柱冷却通道流动与换热数值研究. 《航空动力学报》.
489. 闫五柱，温世峰，刘军，岳珠峰（2010）. 压痕法确定热障涂层蠕变参数. 《稀有金属材料与工程》.
490. 李宝辉，高行山，刘永寿，岳珠峰（2010）. 两端固支输流管道流固耦合振动的稳定性分析. 《机械设计与制造》.
491. 董永朋，王佩艳，刘洋，王富生，岳珠峰（2010）. 采用Beam单元模拟复合材料加筋桁条的优化分析. 《材料科学与工程学报》.
492. 王富生，刘洋，岳珠峰（2010）. 复合材料层合板连接件力学性能影响因素分析. 《材料科学与工程学报》.
493. 付春艳，高行山，王佩艳，王富生，岳珠峰（2010）. 基于细观力学的缠绕复合材料弹性模量的预测分析. 《材料科学与工程学报》.
494. 霍世慧，王富生，王佩艳，岳珠峰（2010）. 复合材料机翼加筋壁板稳定性分析. 《应用力学学报》.
495. 李宝辉，高行山，刘永寿，黄益民，岳珠峰（2010）. 多跨管道流固耦合振动的波传播解法. 《固体力学学报》.
496. Zhixun Wen, N. S. Hou, Baizhi Wang, Zhufeng Yue (2010). Crystallographic life model for single crystal turbine blade and validation by the miniature specimens cut from the turbine blades. Multidiscipline Modeling in Materials and Structures.DOI
497. Wei Liu, Yongshou Liu, Zhufeng Yue (2010). Dynamic reliability of aircraft hydraulic pipelines under random pressure pulsation and vibration. Multidiscipline Modeling in Materials and Structures.DOI
498. Kuahai Yu, Xi Yang, Zhufeng Yue (2010). Aerodynamic and heat transfer design optimization of internally cooling turbine blade based different surrogate models. Structural and Multidisciplinary Optimization.DOI
499. Baoxing Xu, Zhufeng Yue, Xi Chen (2010). Characterization of strain rate sensitivity and activation volume using the indentation relaxation test. Journal of Physics D Applied Physics.DOI
500. Bin Zhao, Baoxing Xu, Zhufeng Yue (2010). Indentation creep-fatigue test on aluminum alloy 2A12. Materials Science and Engineering A.DOI
501. Liu Yongshou, Xindang He, Shao Xiaojun, Jun Liu, Yue Zhu-feng (2010). Analytical and experimental investigation of fatigue and fracture behaviors for anti-double dog-bone riveted joints. Engineering Failure Analysis.DOI
502. Huang Yi-min, Yongshou Liu, Baohui Li, Li Yan-jiang, Yue Zhu-feng (2010). Natural frequency analysis of fluid conveying pipeline with different boundary conditions. Nuclear Engineering and Design.DOI
503. Yue Zhu-feng (2010). Numerical simulation on flow and heat transfer of elliptical pin-fins in cooling channel. Journal of Aerospace Power.
504. Yue Zhu-feng (2010). Parameter sensitivity and resonance reliability of a fluid-filled pipeline. Zhendong yu chongji.
505. Yue Zhu-feng (2010). Analysis of the Influence factors on the Mechanical Properties of Single-bolted Composite Laminates. Cailiao kexue yu gongcheng xuebao.
506. Yue Zhu-feng (2010). The Analysis of Dynamic Reliability Sensitivity for Stochastic Structures on the Bases of Fatigue Damage Accumulative Principle. Aircraft Design.
507. Yue Zhu-feng (2010). Study of Experimental Investigation of Tensile Compress and In-plane Shear Properties Dispersibility of Composite Laminate. Cailiao gongcheng.
508. Yue Zhu-feng (2010). Elastic Modulus Prediction of Filament Winding Composites Based on Micromechanical Model. Cailiao kexue yu gongcheng xuebao.
509. Yue Zhu-feng (2010). Vibration Analysis of a Pipe Conveying Fluid Under Harmonic Excitation. 《国际设备工程与管理：英文版》.
510. Yue Zhu-feng (2010). The stability analysis of liquid-filled pipes with fixed bearing at both ends under FSI vibration. Machinery Design and Manufacture.
511. Yue Zhu-feng (2010). Optimization Analysis of the Composite Stiffeners Based on Beam Elements. Cailiao kexue yu gongcheng xuebao.
512. Yue Zhu-feng (2010). On dynamic structural response of an airplane landing onto water. Baozha yu chongji.
513. Yue Zhu-feng (2010). A Stress Amendment Methodology Used in Doubly Curved Laminate Composite. Aeronautical Computing Technique.
514. Yue Zhu-feng (2010). Experimental Study of Quartz Fibre Cyanate Resin Matrix GFRP Performance in Variant Environment. Journal of Experimental Mechanics.
515. Yue Zhu-feng (2010). Analysis the temperature to the vibration characteristics of pipeline with both ends clamped Impact. Machinery Design and Manufacture.
516. Yue Zhu-feng (2010). Reliability and multidisciplinary design optimization for turbine blade based on decoupled method. Journal of Aerospace Power.
517. Yue Zhu-feng (2010). Effect of clamp assembly defect to the strength of pipelines. Machinery Design and Manufacture.
518. Yue Zhu-feng (2010). Concurrent Subspace Multidisciplinary Design Optimization for Turbine Blade. Machine Design and Research.
519. Yue Zhu-feng (2010). Dynamical optimization design on pipe diameter and pipeline support of the hydraulic pressured/fuel oil pipeline system. Journal of Machine Design.
520. Yue Zhu-feng (2010). Critical Technologies of Simulation Analysis on Thermal-Loads of the Radome in Flight. Aircraft Design.
521. Yue Zhu-feng (2010). Strength reliability analysis of adhesive tongue-and-groove joints for composite laminate and alloy structure. Journal of Machine Design.
522. Yue Zhu-feng (2010). Multidisciplinary Design Optimization for Marine Supercharger Turbo. Acta Armamentarii.
523. Yue Zhu-feng (2010). Application of multidisciplinary design optimization in windshield and canopy system. Journal of Machine Design.
524. 闫五柱，岳珠峰（2009）. 平头压痕试验确定蠕变参数的一种新方法. 《强度与环境》.
525. 于庆民，岳珠峰（2009）. 镍基单晶合金中空穴绕夹杂形核及后续演化的有限元分析. 《航空学报》.
526. 虞跨海，杨茜，倪俊，岳珠峰（2009）. 基于响应面的涡轮叶片冷却通道设计优化. 《航空学报》.
527. 霍世慧，王富生，岳珠峰（2009）. 压缩载荷作用下复合材料开孔补强稳定性分析. 《应用力学学报》.
528. 王想生，赵彬，李永刚，岳珠峰（2009）. 机翼机身对接接头非线性有限元分析. 《计算机仿真》.
529. 虞跨海，岳珠峰，杨茜（2009）. 涡轮叶片转弯流道换热分析与优化设计. 《推进技术》.
530. 李磊，李元生，敖良波，岳珠峰（2009）. 离心式压气机流-热-固耦合分析. 《推进技术》.
531. 倪俊，虞跨海，岳珠峰（2009）. 基于可靠性的涡轮叶片双循环多学科设计优化. 《航空动力学报》.
532. 敖良波，温志勋，李磊，虞跨海，岳珠峰（2009）. 粉末冶金涡轮盘寿命研究进展. 《航空制造技术》.
533. 智友海，史向平，刘永寿，岳珠峰（2009）. SMA管接头系统的蠕变及热应力分析. 《强度与环境》.
534. 李宝辉，高行山，刘永寿，岳珠峰（2009）. 载流管道振动频率计算的有限元-传递矩阵法. 《强度与环境》.
535. 贺谦，陈效鹏，李磊，岳珠峰（2009）. 飞机水面降落的机身载荷研究. 《强度与环境》.
536. 章刚，闫五柱，王晓森，刘军，岳珠峰（2009）. 铝合金点蚀对应力集中系数影响的分析. 《强度与环境》.
537. 智友海，刘永寿，岳珠峰（2009）. 不同载荷下形状记忆合金管接头性能的有限元分析. 《机械设计与制造》.
538. 贾坤荣，刘军，岳珠峰（2009）. 厚板焊接温度场和残余应力场的数值模拟. 《热加工工艺》.
539. Zhenzhou Lü, Jun Yeob Song, Shufang Song, Zhufeng Yue, Jian Wang (2009). Reliability sensitivity by method of moments. Applied Mathematical Modelling.DOI
540. Weiping Gu, Honglu Xu, Jun Liu, Zhufeng Yue (2009). Effect of drilling process on fatigue life of open holes. Tsinghua Science & Technology.DOI
541. Wuzhu Yan, Shifeng Wen, Jun Liu, Zhufeng Yue (2009). Determination of reduced Young's modulus of thin films using indentation test. Acta Metallurgica Sinica (English Letters).DOI
542. Wuzhu Yan, Shifeng Wen, Jun Liu, Zhufeng Yue (2009). Comparison between impression creep and uni-axial tensile creep performed on nickel-based single crystal superalloys. Materials Science and Engineering A.DOI
543. Wan Jian-song, Zhenzhou Lü, Zhufeng Yue (2009). Growth of Casting Microcrack and Micropore in Single-crystal Superalloys Analysed by Three-Dimensional Unit Cell. Journal of Material Science and Technology.
544. Baoxing Xu, Akio Yonezu, Zhufeng Yue, Xi Chen (2009). Indentation creep surface morphology of nickel-based single crystal superalloys. Computational Materials Science.DOI
545. Baoxing Xu, Zhufeng Yue, Xi Chen (2009). An indentation fatigue depth propagation law. Scripta Materialia.DOI
546. Wuzhu Yan, Bin Zhao, Zhufeng Yue (2009). Effect of Surface Roughness on Determination of Creep Parameter using Impression Creep Technique. MRS Proceedings.DOI
547. Liu Yongshou, Shao Xiaojun, Jun Liu, Yue Zhu-feng (2009). Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole. Materials & Design (1980-2015).DOI
548. Yue Zhu-feng (2009). Research on the load of aircraft landed on water. Structure & Environment Engineering.
549. Yue Zhu-feng (2009). Reliability-based multidisciplinary design optimization for turbine blade using double loop approach. Journal of Aerospace Power.
550. Yue Zhu-feng (2009). Experimental Study of Creep Behaviors of MDYB-3 PMMA Under Different Temperatures. Cailiao gongcheng.
551. Yue Zhu-feng (2009). Fatigue Life(S-N)Analysis of Ti-Ni Pipe Joint for the Piping System. Aircraft Design.
552. Yue Zhu-feng (2009). Testing study on low cycle fatigue of 1Cr11Ni2W2MoV steel welding joint at middle temperature. Xi'an Gongcheng Keji Xueyuan xuebao.
553. Yue Zhu-feng (2009). Analysis of Functional Reliability and its Parameter Sensitivity in Aircraft Fuel Pipelines. Aeronautical Computing Technique.
554. Yue Zhu-feng (2009). Finite element analysis of shape memory alloy joint under different loads. Machinery Design and Manufacture.
555. Yue Zhu-feng (2009). The finite element-transfer matrix method for calculating natural frequencies of pipe conveying fluid. Structure & Environment Engineering.
556. Yue Zhu-feng (2009). A new method to determine material creep parameters based flat cylindrical indentation test. Structure & Environment Engineering.
557. Yue Zhu-feng (2009). Effect of pitting corrosion on surface stress concentration factor of aluminium alloy. Structure & Environment Engineering.
558. Yue Zhu-feng (2009). Creep and thermal stress analysis of the SMA joint system. Structure & Environment Engineering.
559. Yue Zhu-feng (2009). Analasis of Pressure Surge in Aircraft Fuel Pipelines. Aircraft Design.
560. Yue Zhu-feng (2009). Analysis on the vibration characteristics of cracked beams subjected to axial force. Machinery Design and Manufacture.
561. Yue Zhu-feng (2009). Effects of Coefficient of Corrosion on Long Crack Expansion after Chemical Milling. Aircraft Design.
562. 韩小平，曹效昂，朱西平，岳珠峰（2008）. 复合材料开口缝合补强结构力学性能实验研究. 《工程力学》.
563. 刘伟，高宗战，岳珠峰（2008）. 不同温度下MDYB-3有机玻璃的棘轮效应. 《材料科学与工程学报》.
564. 侯乃先，虞跨海，岳珠峰（2008）. 单晶冷却叶片气膜孔附近的蠕变持久寿命分析. 《稀有金属材料与工程》.
565. 杜正兴，温志勋，侯乃先，岳珠峰（2008）. 考虑两种晶界的各向异性双晶和三晶体晶界附近弹塑性应力场分析. 《计算力学学报》.
566. 崔伟华，岳珠峰，温志勋（2008）. FGH95缺口小试样高温拉伸和蠕变断裂性能. 《材料科学与工程学报》.
567. 刘永寿，王文，冯震宙，王富生，岳珠峰（2008）. 腐蚀管道的剩余强度与可靠性分析. 《强度与环境》.
568. 徐红炉，王富生，岳珠峰（2008）. 失效准则和非线性对复合材料层合板螺栓连接失效强度的影响. 《强度与环境》.
569. 朱江辉，王志华，王富生，王安强，岳珠峰（2008）. 冲击载荷作用下泡沫铝材料模型的参数研究. 《强度与环境》.
570. 赵彬，许宝星，岳珠峰（2008）. 平头压痕蠕变试验确定铝合金2A12蠕变剩余寿命研究. 《机械强度》.DOI
571. 崔伟华，万建松，温志勋，岳珠峰（2008）. 应变率及温度对FGH95粉末高温合金塑性变形性能影响的实验研究. 《实验力学》.
572. 贾坤荣，刘军，岳珠峰（2008）. 非封闭环焊热力学过程的数值模拟. 《热加工工艺》.
573. 温志勋，于庆民，岳珠峰（2008）. 含与不含晶界空穴的双晶体蠕变行为研究. 《计算力学学报》.
574. 王佩艳，朱振涛，王富生，岳珠峰（2008）. 复合材料螺栓连接性能的分散性和可靠性分析. 《力学季刊》.DOI
575. 李立州，王婧超，吕震宙，岳珠峰（2008）. 涡轮叶片流固耦合协作优化方法. 《推进技术》.
576. 宋迎东，张福军，岳珠峰，蔡显新（2008）. 一类冷却导向叶片的多学科设计优化. 《航空动力学报》.
577. 赵彬，许宝星，岳珠峰（2008）. 平头压痕试验确定铝合金2A12的蠕变剩余寿命研究. 《材料工程》.
578. 李立州，王婧超，吕震宙，岳珠峰（2008）. 基于网格重生成的涡轮叶片变形传递方法. 《航空动力学报》.
579. 高宗战，刘伟，岳珠峰，杨治国（2008）. 有机玻璃疲劳裂纹扩展. 《材料科学与工程学报》.
580. 朱西平，韩小平，岳珠峰（2008）. 复合材料开口缝合补强结构力学性能的实验研究. 《航空材料学报》.
581. Wei Liu, Zongzhan Gao, Zhufeng Yue (2008). Steady ratcheting strains accumulation in varying temperature fatigue tests of PMMA. Materials Science and Engineering A.DOI
582. GAO Hangshan, Yongzhi Han, ZHANG Juan, Yue Zhu-feng (2008). Aerodynamic Optimization Based on Approximation Method for Turbine Blade. Multidiscipline Modeling in Materials and Structures.DOI
583. Yue Zhu-feng (2008). The effects of criterions and nonlinear on the failure strength for bolted joint in composite laminates. Structure & Environment Engineering.
584. Yue Zhu-feng (2008). Reliability and residual strength analysis of corroded pipeline. Structure & Environment Engineering.
585. Yue Zhu-feng (2008). Dispersibility and Reliability Analysis of Composite Laminates Bolted Joint. Chinese Quarterly of Mechanics.
586. Yue Zhu-feng (2008). A numerical Study of Indentation Creep Using Indenters of Different Geometry. Chinese Quarterly of Mechanics.
587. Yue Zhu-feng (2008). Elastic-plastic stress distribution near grain boundary in anisotropic bicrystals and tricrystals considering two kinds of grain boundaries. Jisuan lixue xuebao.
588. Yue Zhu-feng (2008). Prediction of Creep Residual Life of Aluminum Alloy 2A12 by Using Indentation Test Method with Flat Cylindrical Indenters. Cailiao gongcheng.
589. Yue Zhu-feng (2008). A CONTACT-IMPACT COUPLED SIMULATION FOR FAILURE OF AIRCRAFT WINDSHIELD AGAINST BIRD STRIKE. Zhendong yu chongji.
590. Yue Zhu-feng (2008). Turbine blade displacement transfer based on mesh regeneration method. Journal of Aerospace Power.
591. Yue Zhu-feng (2008). Research on structure detail fatigue rating DFR and testing method. Experimental Technology and Management.
592. Yue Zhu-feng (2008). Experimental Studies on Influence of Strain Rate and Temperature on the Plastic Deformation Performance of PM FGH95. Journal of Experimental Mechanics.
593. Yue Zhu-feng (2008). Study on creep behavior of the bi-crystal with or without void in the grain boundary. Jisuan lixue xuebao.
594. Yue Zhu-feng (2008). Experimental Behaviour of Composite Laminates Containing a Hole. Hangkong cailiao xuebao.
595. Yue Zhu-feng (2008). Effect of Drilling Processes on Fatigue Performance for Fasten Holes. Aircraft Design.
596. Yue Zhu-feng (2008). The Detail Analysis for Primary Load-carrying Structure of the Aerocraft. Aircraft Design.
597. 刘军，岳珠峰，刘永寿（2007）. 孔口划痕对紧固孔疲劳寿命的影响. 《材料科学与工程学报》.
598. 王毅，孙新，岳珠峰，候乃先（2007）. 复合材料开口缝合补强试验及模拟. 《材料科学与工程学报》.
599. 王富生，李立州，王新军，张健锋，岳珠峰（2007）. 鸟体材料参数的一种反演方法. 《航空学报》.
600. 毛坤，朱西平，李磊，胡伟鹏，岳珠峰（2007）. 某型飞机风挡及舱盖系统减重多学科设计优化方法研究. 《材料科学与工程学报》.
601. 邵小军，岳珠峰，王毅，张庆茂（2007）. 复合材料大斜削结构压缩试验和损伤模拟研究. 《航空材料学报》.
602. 虞跨海，李立州，岳珠峰（2007）. 基于解析及特征造型的涡轮冷却叶片参数化设计. 《推进技术》.
603. 王新军，岳珠峰，王富生，冯震宙（2007）. 飞机风挡结构抗鸟撞动响应数值模拟. 《强度与环境》.
604. 王富生，张洵安，岳珠峰（2007）. M.Shinozuka方法在风荷载模拟中的应用. 《强度与环境》.
605. 朱振涛，侯乃先，岳珠峰，温志勋，李磊（2007）. 高温下薄壁圆筒拉伸试样的应力-应变关系研究. 《强度与环境》.
606. 崔伟华，岳珠峰，杨莉（2007）. 界面拉伸强度对含夹杂粉末高温合金断裂性能的影响. 《热加工工艺》.
607. 温志勋，苟文选，岳珠峰（2007）. 镍基单晶裂纹扩展路径研究. 《稀有金属材料与工程》.
608. 崔伟华，万建松，岳珠峰，杨治国（2007）. 镍基粉末冶金FGH95高温合金的拉伸及低周疲劳性能研究(英文). 《稀有金属材料与工程》.
609. 冯震宙，王新军，王富生，高行山，岳珠峰（2007）. 朱-王-唐非线性粘弹性本构模型在有限元分析中的实现及其应用. 《材料科学与工程学报》.
610. 王佩艳，岳珠峰（2007）. 大子样下复合材料层合板拉伸性能分散性研究. 《机械强度》.
611. 刘勇俊，赵彬，许宝星，岳珠峰（2007）. 平头压痕试验结合有限元法确定材料蠕变参数. 《稀有金属材料与工程》.
612. 王婧超，李立州，岳珠峰（2007）. 涡轮叶片多学科设计优化中的多学科可行解耦. 《推进技术》.
613. 刘伟，高宗战，岳珠峰（2007）. MDYB-3有机玻璃疲劳性能温度效应研究. 《航空学报》.
614. 温志勋，岳珠峰，于庆民，侯乃先（2007）. 镍基单晶合金CT试样裂纹尖端应力结构及晶体滑移特性. 《航空学报》.
615. 李立州，王婧超，吕震宙，岳珠峰（2007）. 学科间载荷参数空间插值传递方法. 《航空动力学报》.
616. 韩永志，高行山，李立州，岳珠峰（2007）. 基于Kriging模型的涡轮叶片多学科设计优化. 《航空动力学报》.
617. 王婧超，李立州，岳珠峰（2007）. 涡轮叶片的多学科设计优化系统. 《航空动力学报》.
618. 虞跨海，岳珠峰（2007）. 涡轮冷却叶片参数化建模及多学科设计优化. 《航空动力学报》.
619. 李立州，王婧超，韩永志，吕震宙，岳珠峰（2007）. 基于网格变形技术的涡轮叶片变形传递. 《航空动力学报》.
620. 温志勋，岳珠峰，万建松，于庆民（2007）. 粉末冶金涡轮盘简单模拟件低周疲劳寿命研究. 《实验力学》.
621. Zhenzhou Lü, Shufang Song, Zhufeng Yue, Jian Wang (2007). Reliability sensitivity method by line sampling. Structural Safety.DOI
622. Xinmei Wang, Baoxing Xu, Zhufeng Yue (2007). Phase transformation behavior of pseudoelastic NiTi shape memory alloys under large strain. Journal of Alloys and Compounds.DOI
623. Yongshou Liu, Zongzhan Gao, Wei Liu, Zhufeng Yue (2007). Analytical and experimental investigation of fatigue crack propagation for polyethylene methacrylate. Materials Science and Engineering A.DOI
624. Kuahai Yu, Zhufeng Yue, Jian Wang (2007). Parametric Modeling and Multidisciplinary Design Optimization of 3-D Internally Cooled Turbine Blades. 7th AIAA ATIO Conf, 2nd CEIAT Int'l Conf on Innov and Integr in Aero Sciences,17th LTA Systems Tech Conf; followed by 2nd TEOS Forum.DOI
625. Yongshou Liu, Zhen-zhou Feng, Kuahai Yu, Zhufeng Yue, Jian Wang (2007). Influence of Fuel Pump Failure on the Fuel Feeding Stability of an Aircraft Fuel System. 7th AIAA ATIO Conf, 2nd CEIAT Int'l Conf on Innov and Integr in Aero Sciences,17th LTA Systems Tech Conf; followed by 2nd TEOS Forum.DOI
626. Xinmei Wang, Baoxing Xu, Zhufeng Yue, Xiaoyan Tong (2007). Fracture behavior of the compact tension specimens in NiTi shape memory alloys. Materials Science and Engineering A.DOI
627. Lizhou Li, Zhenzhou Lü, Jingchao Wang, Zhufeng Yue (2007). Turbine blade temperature transfer using the load surface method. Computer-Aided Design.DOI
628. Xu Baoxing, Xinmei Wang, Zhufeng Yue (2007). Determination of Residual Stress and Yield Stress Simultaneously by Indentation Method with Dual Indenters. MRS Proceedings.DOI
629. Xinjun Wang, Feng Zhen-zhou, Wang Fusheng, Yue Zhu-feng (2007). Dynamic Response Analysis of Bird Strike on Aircraft Windshield Based on Damage-modified Nonlinear Viscoelastic Constitutive Relation. Chinese Journal of Aeronautics.DOI
630. Yue Zhu-feng (2007). Implementation and its Application in Finite Element Analysis of Constitutive Model for ZWT Nonlinear Viscoelastic Material. Cailiao kexue yu gongcheng xuebao.
631. Yue Zhu-feng (2007). Parametric design for cooling turbine blades based on analytic and feature modeling. Journal of Propulsion Technology.
632. YU Kua-hai, Yue Zhu-feng (2007). Parametric modeling and multidisciplinary design optimization for cooling turbine blade. Journal of Aerospace Power.
633. Yue Zhu-feng (2007). Kriging model-based multidisciplinary design optimization for turbine blade. Journal of Aerospace Power.
634. Yue Zhu-feng (2007). A Method to Identify Bird’s Material Parameters. Acta Aeronautica Et Astronautica Sinica.
635. Yue Zhu-feng (2007). The Fatigue Performance of MDYB-3 PMMA Under Different Temperature. Acta Aeronautica Et Astronautica Sinica.
636. Yue Zhu-feng (2007). Modeling and Simulation Analysis of an Airplane Fuel System. Aircraft Design.
637. Yue Zhu-feng (2007). Multi-disciplinary feasible decoupling in multidisciplinary design optimization for turbine blade. Journal of Propulsion Technology.
638. Yue Zhu-feng (2007). Displacement transfer with the mesh deformation method in multidisciplinary optimization of turbine blades. Journal of Aerospace Power.
639. Yue Zhu-feng (2007). Weight Optimization of Windshield and Canopy System with MDO Method. Cailiao kexue yu gongcheng xuebao.
640. 万建松，吕震宙，岳珠峰（2006）. 单晶高温合金中铸造微孔洞的扩长. 《应用力学学报》.
641. 许宝星，李立州，赵彬，岳珠峰（2006）. 平头压痕试验确定热障涂层弹性模量的方法研究. 《应用力学学报》.
642. 韩小平，曹效昂，朱西平，岳珠峰（2006）. 孔口缝合补强对含孔层板应变集中影响的实验研究. 《复合材料学报》.
643. 邵小军，岳珠峰，刘永寿（2006）. 对称削层复合材料结构的有限元分析. 《强度与环境》.
644. 王毅，岳珠峰，Stein MP（2006）. 镍基单晶超合金中孔洞长大的试验和有限元分析(英文). 《稀有金属材料与工程》.
645. 朱西平，毛坤，韩小平，岳珠峰（2006）. 含孔复合材料层板的力学性能研究. 《机械科学与技术》.
646. 姜云鹏，岳珠峰（2006）. 单剪螺栓连接复合材料叠层板螺栓孔周边应力场分布. 《机械强度》.
647. 王毅，姜云鹏，岳珠峰（2006）. 压缩载荷作用下复合材料层合板结构开口翻边补强试验及数值模拟. 《机械强度》.
648. 李棠，王清远，岳珠峰（2006）. 铝合金2A12韧性断裂机制的实验研究. 《实验力学》.
649. 邵小军，岳珠峰，王毅，张庆茂（2006）. 复合材料斜削结构试验和损伤模拟研究. 《材料科学与工程学报》.
650. 邵小军，岳珠峰，李立州，张庆茂（2006）. 复合材料中厚层合板在轴压位移和剪切作用下的稳定性研究. 《机械强度》.DOI
651. 万建松，吕震宙，岳珠峰（2006）. 单晶高温材料中铸造微孔洞的扩长. 《计算力学学报》.
652. Yue Zhu-feng (2006). Experimental Study of Fatigue Life of GH2132 Butt Weld Joint at Different Temperatures. Gas Turbine Experiment and Research.
653. 岳珠峰（2005）. 薄膜多层滚压的表面粗糙度晶体学分析. 《计算力学学报》.
654. 赵彬，许宝星，岳珠峰（2005）. 平头压痕试验确定薄膜弹塑性参数的研究. 《材料科学与工程学报》.
655. 肖纳敏，岳珠峰，兰勇军，佟铭明，李殿中（2005）. 介观尺度上热变形奥氏体储存能演化的计算机模拟. 《金属学报》.
656. 岳珠峰（2005）. 平头压痕蠕变损伤实验的有限元模拟分析. 《金属学报》.
657. 岳珠峰，邵小军（2005）. 短纤维增强复合材料(MMC)的蠕变损伤失效的微观数值模拟(英文). 《稀有金属材料与工程》.
658. 姜云鹏，张庆茂，王毅，岳珠峰（2005）. 复合材料层合板开口翻边补强试验和数值研究. 《复合材料学报》.
659. 姜云鹏，岳珠峰（2005）. 复合材料层合板螺栓连接失效的数值模拟. 《复合材料学报》.
660. 王安强，岳珠峰，杨治国（2005）. 镍基粉末冶金高温合金的压缩疲劳性能研究. 《航空动力学报》.
661. 于庆民，邵小军，岳珠峰（2005）. 镍基单晶合金DD3切口圆棒试样的蠕变响应有限元分析. 《材料工程》.
662. 姜云鹏，岳珠峰，卢文书，靳诚忠（2005）. 计入纤维交叉影响的缠绕复合材料等效模量计算方法. 《燃气涡轮试验与研究》.
663. Yue Zhu-feng (2005). FINITE ELEMENT ANALYSIS OF THE CREEP DAMAGE INDENTATION TESTING WITH FLAT INDENTER. Acta Metallurgica Sinica.
664. Yue Zhu-feng (2005). Study on Creep Response of Nickel-base Single Crystal Circular Notched Specimens. Cailiao gongcheng.
665. Yue Zhu-feng (2005). Experimental Study of Dynamic Mechanical Properties of Composite Laminate Plate under the Impact Loading. Science Technology and Engineer.
666. Yue Zhu-feng (2005). Crystallographic study of surface finish in pack rolling of thin sheets. Jisuan lixue xuebao.
667. Yue Zhu-feng (2005). A New Method to Determinate the Material Creep Parameters by the Flat Cylindrical Indenter. Science Technology and Engineer.
668. Yue Zhu-feng (2005). The Progess Report of the MDO of Turbo-machinery Blades. Science Technology and Engineer.
669. Yue Zhu-feng (2005). Experimental Study of Dynamic Tensile Properties of CFRP、GFRP Laminates under Shock Stress Waves. Mechanical Science and Technology.
670. 吕震宙，岳珠峰（2004）. 模糊随机可靠性分析的统一模型. 《力学学报》.
671. 吕震宙，徐有良，杨治国，岳珠峰（2004）. 粉末冶金涡轮盘寿命稳健性分析与设计. 《稀有金属材料与工程》.
672. 于庆民，岳珠峰（2004）. 镍基单晶合金切口圆棒试样三维晶体弹塑性应力场的数值模拟. 《材料科学与工程学报》.
673. 王万鹏，岳珠峰，杨治国（2004）. 含夹杂粉末冶金材料拉伸试件的损伤分析. 《中国有色金属学报》.
674. 王心美，姜云鹏，王亚芳，王建方，岳珠峰（2004）. 圆棒拉伸试样蠕变过程中的应力应变分布分析. 《航空材料学报》.
675. 刘永寿，支希哲，顾致平，王三舟，岳珠峰（2004）. 转子振动的灰色Verhuslt预测优化控制研究. 《应用力学学报》.
676. Yue Zhu-feng (2004). On the study of the initiation of the micro crack on the smooth surface of polycrystalline. Applied Mathematics and Mechanics.DOI
677. Wan Jian-song, Yue Zhu-feng (2004). Stress distribution near grain boundary in anisotropic bicrystals and tricrystals. Applied Mathematics and Mechanics.DOI
678. Yue Zhu-feng (2004). A study of the creep stress and strain characteristics of smooth and notched bars. Hangkong cailiao xuebao.
679. Yue Zhu-feng (2004). Study on the Necking of Orthotropic Smooth Tensile Bars. Gas Turbine Experiment and Research.
680. Yue Zhu-feng (2004). Development of MARC User Subroutine for Creep Analysis of Nickel-based Single Crystal Blade. Gas Turbine Experiment and Research.
681. 韩红梅，张秀莲，李贺军，岳珠峰，李克智（2003）. 炭/炭复合材料高温力学行为研究. 《新型炭材料(中英文)》.
682. 万建松，岳珠峰，耿晓亮，卢智先（2003）. 一种镍基双晶材料疲劳裂纹扩展效应. 《固体力学学报》.DOI
683. 万建松，岳珠峰（2003）. 正交各向异性韧性材料应力-应变关系. 《力学学报》.
684. 姜云鹏，岳珠峰（2003）. 高温下的金属基复合材料双剪切试样应力应变有限元分析. 《材料工程》.
685. 岳珠峰，吕震宙，杨治国，尹泽勇（2003）. 镍基单晶结构的蠕变损伤寿命研究. 《推进技术》.
686. 岳珠峰，吕震宙，杨治国，成晓鸣，尹泽勇（2003）. 晶体取向的偏差和随机性对镍基单晶叶片强度与蠕变寿命的影响. 《航空动力学报》.
687. 杨治国，岳珠峰，尹泽勇，魏鹏义，成晓鸣（2003）. 单晶涡轮叶片材料本构模型及应用研究. 《航空动力学报》.
688. 王安强，万建松，苟文选，矫桂琼，岳珠峰（2003）. 单纤维界面强度光弹性实验和理论研究. 《复合材料学报》.
689. 岳珠峰，胡卫兵，吕震宙（2003）. 双剪切试样用于短纤维金属基复合材料的蠕变响应研究. 《金属学报》.
690. 姜云鹏，岳珠峰，王心美，王亚芳（2003）. 金属基复合材料的蠕变力学研究进展. 《燃气涡轮试验与研究》.
691. 岳珠峰，胡卫兵，吕震宙（2003）. 热处理对金属基短纤维复合材料蠕变性能影响的试验和理论研究. 《稀有金属材料与工程》.
692. 岳珠峰，万建松，张庆茂（2003）. 一种形状记忆合金的本构模型及其应用(英文). 《稀有金属材料与工程》.
693. 高宗战，岳珠峰（2003）. 带孔复合材料板和螺栓连接复合材料板的有限元计算分析. 《飞机设计》.
694. 岳珠峰，吕震宙（2003）. 压痕法确定纤维复合材料界面影响区蠕变特性的数值模拟法. 《纤维复合材料》.
695. Lü Zhenzhou, Yue Zhu-feng, Feng Yun-wen (2003). Random-fuzzy model for the ductile/brittle transition. Applied Mathematics and Mechanics.DOI
696. Yue Zhu-feng, Wan Jian-song, Lü Zhenzhou (2003). Determination of creep parameters from indentation creep experiments. Applied Mathematics and Mechanics.DOI
697. 岳珠峰（2002）. 基于有限元的金属基短纤维复合材料MMC的一种统计蠕变模型. 《应用数学和力学》.
698. 岳珠峰，吕震宙（2002）. 双剪切试样在镍基单晶合金蠕变变形损伤和寿命研究中的应用. 《金属学报》.
699. 万建松，岳珠峰（2002）. 采用压痕实验获得材料性能的研究现状. 《实验力学》.
700. 岳珠峰，胡卫兵，吕震宙（2002）. 镍基单晶合金筏化规律及蠕变持久寿命模型在复杂应力状态下的考核. 《稀有金属材料与工程》.
701. 万建松，岳珠峰，张克实（2002）. 用能量法分析层状材料弹性接触问题. 《应用力学学报》.
702. Zhufeng Yue, Zhiguo Yang, Zhenzhou Lü (2002). Life Prediction Model for a Nickel-base Single Crystal Superalloy DD3. Chinese Journal of Aeronautics.DOI
703. Yue Zhu-feng (2002). Statistic modeling of the creep behavior of metal matrix composites based on finite element analysis. Applied Mathematics and Mechanics.DOI
704. Yue Zhu-feng (2002). APPLICATION OF THE DOUBLE SHEAR SPECIMENS IN THE STUDY OF THE CREEP DAMAGE AND RUPTURE OF THE NICKEL-BASE SINGLE CRYSTAL SUPERALLOYS. Acta Metallurgica Sinica.
705. 岳珠峰，G.Eggeler，胡卫兵（2001）. 双剪切试样的应力应变分析及其在镍基单晶超合金上的应用(英文). 《稀有金属材料与工程》.
706. 万建松，岳珠峰，吴德强（2001）. 镍基双晶体晶界断裂特性研究. 《实验力学》.
707. 岳珠峰，吕震宙（2000）. 复杂应力状态下镍基单晶合金低周疲劳寿命预测模型. 《稀有金属材料与工程》.
708. 岳珠峰，陶仙德，吕震宙（2000）. 镍基单晶超合金的剪切强度研究. 《稀有金属材料与工程》.
709. 吕震宙，岳珠峰（2000）. 结构体系随机模糊失效模式的确定方法. 《西北工业大学学报》.
710. 吕震宙，岳珠峰，冯蕴雯（2000）. 多模式广义失效概率计算的数值模拟法及其工程应用. 《应用数学和力学》.
711. Yue Zhu-feng, Tao Xiande, Ying Zeyong, Haiyan Li (2000). A crystallographic model for the orientation dependence of low cyclic fatigue property of a nickel-base single crystal superalloy. Applied Mathematics and Mechanics.DOI
712. Lü Zhenzhou, Yue Zhu-feng, Feng Yunwen (2000). General failure probability simulation and application for multi-mode. Applied Mathematics and Mechanics.DOI
713. 岳珠峰，吕震宙，何健（1999）. 镍基单晶合金的γ'相筏化准则及蠕变性能的晶体取向相关性. 《金属学报》.
714. Yue Zhu-feng, Lü Zhenzhou, Zheng Chang-qing (1999). Meso approaches for the creep damage behavior of nickel-base directionally solidified superalloys. Applied Mathematics and Mechanics.DOI
715. 岳珠峰，韩宏宪，吕震宙（1997）. 模拟镍基单晶合金复杂应力状态试样型式分析设计. 《航空材料学报》.
716. 岳珠峰，吕震宙，周利，郑长卿（1997）. 镍基单晶合金的厚度效应. 《金属学报》.
717. 岳珠峰，吕震宙，郑长卿（1997）. 复杂应力状态下镍基单晶合金蠕变损伤规律研究. 《机械工程材料》.
718. Yue Zhu-feng, Zheng Chang-qing (1993). The analyses of the three-dimensional stress structure near the crack tip of mode I CT specimens in elastic-plastic state (II)—The analyses of the stress structure. Applied Mathematics and Mechanics.DOI
719. Yue Zhu-feng, Zheng Chang-qing (1993). The analyses of the three-dimensional stress structure near the crack tip of mode I CT specimens in elastic-plastic state (I)—The analyses of constraint parameters and fracture parameters. Applied Mathematics and Mechanics.DOI
720. 岳珠峰，张克实，郑长卿（1992）. 不同应力三维度下空穴缩胀的模拟计算与分析. 《航空学报》.

预印本

1. Ling-ru WANG, Shuxin Wei, Fuchao Liu, Peiyan Wang, Zhufeng Yue (2026). A Physics-Bayesian Collaborative Inversion Framework for Small-Sample Structural Model Calibration. SSRN Electronic Journal.DOI
2. Haiqing Pei, Zhixun Wen, T. Zuo, Hao Zhang, Zhixun Wen, S.F. Wen, Zhufeng Yue (2025). Stress-Medium Synergistic Hot Corrosion Failure Mechanism and Kinetics Model of a Ni-Based Superalloy. SSRN Electronic Journal.DOI
3. Haiqing Pei, Shuaishuai Wang, Yizhe Yang, Xiaohu Yao, Yanchao Zhao, Zhufeng Yue (2023). Study of Thermomechanical Fatigue Behavior of Directional Solidification Column Crystal Alloy Dz406. SSRN Electronic Journal.DOI
4. Wei Sun, Guo‐Yan Zhou, Ming Li, Zhixun Wen, Zhufeng Yue, S.T. Tu (2023). Recent Development of Impression Creep Test. SSRN Electronic Journal.DOI
5. Wei Sun, Ming Li, Shi Xiaoyi, Wen Wu, Xu Xu, Zhixun Wen, Zhufeng Yue, Shan‐Tung Tu (2023). Identification of Creep Damage Properties of Coating Via a Compound Miniaturized Testing Method and an Inverse Approach. SSRN Electronic Journal.DOI
6. Yanqiu Yang, Zhixun Wen, Yanchao Zhao, Guangxian Lu, Xiaohu Yao, Zhufeng Yue (2022). Synergistic Effect between Hot Corrosion Behaviour of Ni-Based Single Crystal Superalloy Under Multiple Molten Salts. SSRN Electronic Journal.DOI
7. Jundong Wang, Zhixun Wen, 旭光 鄭, Changsheng Ai, Yating Liu, Zhufeng Yue (2022). Large-Scale Strain Measurement of Micro-Specimens in High-Temperature Environments Based on Efpi. SSRN Electronic Journal.DOI
8. Xiaoyang Wu, Bin Zhao, Qing Chen, Ke Zhang, Peiyan Wang, Zhufeng Yue (2022). Dynamic Response Analysis of Fuselage Panel Based on Tire Fragment Hazard Mode. SSRN Electronic Journal.DOI

书籍章节

1. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Miniature thin-plate specimen tests. Elsevier eBooks.DOI
2. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Introduction. Elsevier eBooks.DOI
3. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Miniature bending creep tests. Elsevier eBooks.DOI
4. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Small two-bar specimen creep test. Elsevier eBooks.DOI
5. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Indentation creep test with a spherical indenter. Elsevier eBooks.DOI
6. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Impression creep test with a rectangular indenter. Elsevier eBooks.DOI
7. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Opportunities for future development. Elsevier eBooks.DOI
8. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Small ring-type specimen creep tests. Elsevier eBooks.DOI
9. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Determination of material properties via inverse techniques. Elsevier eBooks.DOI
10. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Equivalent gauge length under steady-state creep. Elsevier eBooks.DOI
11. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Small punch test. Elsevier eBooks.DOI
12. Wei Sun, Zhufeng Yue, Guo‐Yan Zhou, Zhixun Wen, Ming Li (2024). Basic material behavior models for creep and viscoplasticity. Elsevier eBooks.DOI
13. Baoxing Xu, Xi Chen, Zhufeng Yue (2018). Indentation Fatigue Mechanics. Springer eBooks.DOI
14. Jun Liu, Zhufeng Yue, Xiaoliang Geng, Shifeng Wen, Wuzhu Yan (2018). Effect of Surface Quality of Open Holes on Fatigue Life. Springer eBooks.DOI
15. Jun Liu, Zhufeng Yue, Xiaoliang Geng, Shifeng Wen, Wuzhu Yan (2018). Anti-fatigue Strengthening Technology of Holes. Springer eBooks.DOI
16. Jun Liu, Zhufeng Yue, Xiaoliang Geng, Shifeng Wen, Wuzhu Yan (2018). Fatigue Test and Analysis of Box Section. Springer eBooks.DOI
17. Jun Liu, Zhufeng Yue, Xiaoliang Geng, Shifeng Wen, Wuzhu Yan (2018). Shot Peening Strengthening Technology. Springer eBooks.DOI
18. Jun Liu, Zhufeng Yue, Xiaoliang Geng, Shifeng Wen, Wuzhu Yan (2018). Outline of Fatigue and Fracture Mechanics. Springer eBooks.DOI
19. Jun Liu, Zhufeng Yue, Xiaoliang Geng, Shifeng Wen, Wuzhu Yan (2018). Anti-fatigue Design and Analysis of Joints. Springer eBooks.DOI
20. Zhixun Wen, Yamin Zhang, Youliang Li, Zhufeng Yue (2017). Effects of Blade Curvature on Fatigue Life of Nickel-Based Single Crystal Structures with Film-Cooling Holes. ˜The œminerals, metals & materials series.DOI

书籍

1. Jun Liu, Zhufeng Yue, Xiaoliang Geng, Shifeng Wen, Wuzhu Yan (2018). Long-Life Design and Test Technology of Typical Aircraft Structures. Springer eBooks.DOI