衣海龙｜东北大学｜学者主页

2026

焊接热输入对工程装备用高强钢CGHAZ组织及性能的影响

卢志文，陈尹泽，衣海龙，上官林建，高岩，陶振，李静宇，刘鹏

《河南冶金》

2026

Si/V ratio regulation enables enhanced cryogenic strength–ductility synergy in Fe–Co–Cr–V–Ni–Si metastable high entropy alloys

Hongbing Yang, Zhehao Ren, Yize Fu, Hailong Yi

Journal of Alloys and Compounds

DOI

2025

Heterogeneous microstructure fabricated by cryogenic rolling and annealing reinforced TRIP effect for superior cryogenic strength-ductility in Fe44Co36Cr10V10 HEA

Hailong Yi, Hongbing Yang, Jiarui Fan

Materials Science & Engineering: A

DOI

2025

Enhanced cryogenic tensile properties in a Fe-high-entropy alloy

Hailong Yi, Cheng Tao, Chao Chen, Jiarui Fan, Shi-Wei Wang

Journal of Alloys and Compounds

DOI

2025

Effect of Niobium Content on Microstructure Evolution, Mechanical Properties, and Phase Transformation Kinetics of an Automotive Beam Steel Under Continuous Cooling Conditions

Zhong Ming Huang, Yinze Chen, Shaohua Liu, Jinhua Zhou, Hailong Yi

steel research international

DOI

2025

The Influence of Welding Heat Input on the Impact Performance of an Automotive Beam Steel

Hailong Yi, Dianshuang Wu, Shaohua Liu, Jiwen Cheng, Jinhua Zhou, Yifu Jiang, Lu Zhao

Journal of Materials Engineering and Performance

DOI

2024

Outstanding cryogenic tensile properties achieved in a Fe-high-entropy alloy

Hailong Yi, Jiarui Fan, Cheng Tao, Chao Chen

Materials Today Communications

DOI

2024

Cryo-pre-straining contributes to achieving high yield strength in high-entropy alloys

Cheng Tao, Chao Chen, Jiarui Fan, Wei Luo, Hailong Yi

Intermetallics (Barking)

DOI

2024

Grain refinement and strain delocalization in TRIP high-entropy alloys during hot deformation

Cheng Tao, Jiarui Fan, Lingyan Wu, Hailong Yi

Materials Today Communications

DOI

2024

Good strength-ductility synergy achieved in a Fe62Ni16Co9Mn9Ti3Si1 Fe-high-entropy alloy with heterogeneous structures

Hailong Yi, Chao Chen, Cheng Tao, Jiarui Fan

Journal of Materials Research and Technology

DOI

2022

低成本900MPa级工程机械用钢连续冷却转变行为的研究

方明阳，杨康，孙斌，陈尹泽，宋立伟，衣海龙

《轧钢》

2022

Tuning Microstructure and Mechanical Performance of a Co-Rich Transformation-Induced Plasticity High Entropy Alloy

Hailong Yi, Renyi Xie, Yifan Zhang, Liqiang Wang, Min Tan, Tao Li, Daixiu Wei

Materials

DOI

2021

CoCrFeNi高熵合金组织演变规律及再结晶动力学

毕梦园，谢仁义，张艺凡，衣海龙

《东北大学学报(自然科学版)》

2021

High-Temperature Deformation Behaviors of the C-Doped and N-Doped High Entropy Alloys

Hailong Yi, Yifan Zhang, Renyi Xie, Mengyuan Bi, Daixiu Wei

Metals

DOI

2021

A strategy for enhancing the mechanical property of the precipitation-strengthened medium-entropy alloy

Hailong Yi, Daixiu Wei, Renyi Xie, Yi-Fan Zhang, Hidemi Kato

Materials Science and Engineering A

DOI

2021

Study on Diversified Carbide Precipitation in High‐Strength Low‐Alloy Steel during Tempering

Wei Zhao, Hongwei Zhou, Liangwei Fang, Fengmei Bai, Hailong Yi, Naqash Ali, Liqiang Zhang, Guangwen Zhen

steel research international

DOI

2021

Suppression of Austenite Grain Coarsening by Ferrite Pinning during Pseudo-carburizing Treatment

L. Q. Liu, X. C. Xiong, G. D. Wang, Hailong Yi

Journal of Materials Engineering and Performance

DOI

2021

Microstructure Refinement of a Transformation-Induced Plasticity High-Entropy Alloy

Hailong Yi, Daixiu Wei, Renyi Xie, Yi-Fan Zhang, Hidemi Kato

Materials

DOI

2020

1100 MPa级高强钢的低周疲劳行为

周红伟，白凤梅，杨磊，陈艳，方俊飞，张立强，衣海龙，何宜柱

《金属学报》

2020

Significant Improvement the Mechanical Properties of CoCrNi Alloy by Tailoring a Dual FCC-Phase Structure

Hailong Yi, Mengyuan Bi, Kang Yang, Bing Zhang

Materials

DOI

2020

The microstructure evolution and tensile properties of medium-Mn steel heat-treated by a two-step annealing process

Dapeng Yang, Pengfei Du, Di Wu, Hailong Yi

Journal of Material Science and Technology

DOI

2020

Hot Deformation and Dynamic Recrystallization Behavior of CoCrNi and (CoCrNi)94Ti3Al3 Medium Entropy Alloys

Hailong Yi, Daixiu Wei, Yingchen Wang, Liqiang Wang, Ming-yang Fang, Kang Yang, Hidemi Kato

Metals

DOI

2020

Effect of austenite stability on the hole expansion behavior of δ-TRIP steels

Xinyang Xu, B. Y. Xu, Peng Chen, R. D. Liu, Guodong Wang, Hailong Yi

Materials Today Communications

DOI

2019

C-Mn-Ni高强钢的连续冷却相变研究

衣海龙，韦弦，王宏，徐党委，赵连瑞

《轧钢》

DOI

2019

合金元素Cr、Ni和Mo对钒微合金钢动态再结晶行为的影响

吴俊平，潘中德，梁新增，衣海龙

《金属热处理》

DOI

2019

Microstructure–mechanical property relationship in Ti–Mo microalloyed steel with random and interphase precipitates

Hailong Yi, Lu-ran Zhang, Rui-hai Duan, Xinzeng Liang

Journal of Iron and Steel Research International

DOI

2019

Masing Behavior and Microstructural Change of Quenched and Tempered High-Strength Steel Under Low Cycle Fatigue

Fengmei Bai, Hongwei Zhou, Liu Xiang-hua, Meng Song, Yaxin Sun, Hailong Yi, Zhenyi Huang

Acta Metallurgica Sinica (English Letters)

DOI

2018

温度参数对Ti/Ti-Mo微合金钢力学性能及强化机制的影响

衣海龙，毕梦园，方明阳，张新，李鹏伟，周永康

《材料热处理学报》

2018

Influence of rolling temperature and cooling rate on nano-size carbides in a Ti-Mo microalloyed steel

Hailong Yi, Luran Zhang, Zikun Yang

SN Applied Sciences

DOI

2017

Yield Strength Enhancement by Carbon Trapping in Ferrite of the Quenching and Partitioning Steel

Peng Chen, G. D. Wang, Anna V. Ceguerra, Andrew Breen, Simon Peter Ringer, X. C. Xiong, Qi Lu, Jeff Wang, Hailong Yi

Metallurgical and Materials Transactions A

DOI

2016

淬火及回火工艺对中锰钢组织和性能的影响

衣海龙，韦弦，王宏，赵连瑞

《材料热处理学报》

2016

钒微合金化中锰钢组织与性能研究

衣海龙，张路冉，余宣询，刘振宇

《华中科技大学学报(自然科学版)》

2015

Ti-Mo微合金钢铁素体中的析出物

衣海龙，龙雷周，刘振宇，王国栋

《材料热处理学报》

2015

Mo-Ti微合化热轧高强钢的组织与性能

衣海龙，龙雷周，刘振宇，王国栋

《材料热处理学报》

2015

钛微合金化热轧双相钢的工艺研究

衣海龙，徐薇，龙雷周，刘振宇，王国栋

《工程科学学报》

2015

钛微合金化热轧TRIP钢的连续冷却相变研究

衣海龙，徐薇，龙雷周，刘振宇

《材料工程》

2015

Effects of Deformation Temperature on Microstructure Evolution of a Nb and Ti Micro-alloyed TRIP Steel

Gongting Zhang, Zhiwang Zheng, Hailong Yi

DOI

2014

热轧钛微合金化TRIP钢的组织与性能研究

衣海龙，徐薇，龙雷周，刘振宇，王国栋

《材料工程》

2014

超快冷+层流冷却工艺对Mn-Ti钢组织与性能影响

衣海龙，徐洋，刘振宇，王国栋

《材料热处理学报》

2014

The blocking effects of interphase precipitation on dislocations’ movement in Ti-bearing micro-alloyed steels

Yang Xu, Weina Zhang, Mingxue Sun, Hailong Yi, Zhenyu Liu

Materials Letters

DOI

2014

Influence of Finishing Cooling Temperature and Holding Time on Nanometer-size Carbide of Nb-Ti Microalloyed Steel

Hailong Yi, Yang Xu, Mingxue Sun, Zhenyu Liu, Guodong Wang

Journal of Iron and Steel Research International

DOI

2014

Investigation of Precipitate in Polygonal Ferrite in a Ti-Microalloyed Steel Using TEM and APT

Hailong Yi, Lei-Zhou Long, Zhenyu Liu, Guodong Wang

steel research international

DOI

2013

回火温度对低碳贝氏体高强度钢组织性能的影响

孙明雪，王猛，衣海龙，刘振宇

《东北大学学报(自然科学版)》

2013

新一代TMCP工艺下热轧钢材显微组织的基本原理

刘振宇，唐帅，周晓光，衣海龙，王国栋

《中国冶金》

2013

轧后冷却方式对钛微合金高强钢组织性能的影响

徐洋，李凡，孙明雪，周砚磊，衣海龙，刘振宇

《轧钢》

2013

超快冷工艺下600MPa高强钢的组织与性能

衣海龙，徐洋，孙明雪，刘振宇

《钢铁》

2013

轧制工艺对Q690工程机械用钢低温冲击功的影响

衣海龙，孙明雪，徐洋，刘振宇

《材料热处理学报》

2012

超快冷工艺下780MPa级工程机械用钢的组织与性能

衣海龙，徐洋，肖爱达，刘振宇

《东北大学学报(自然科学版)》

2012

不同工艺下Nb-Ti微合金钢组织演变和析出行为

徐洋，衣海龙，孙明雪，刘振宇

《东北大学学报(自然科学版)》

2012

超快冷工艺下工程机械用550MPa级钢的组织与性能

李凡，衣海龙，刘振宇，王国栋

《机械工程材料》

2012

钼对铌钛微合金钢高温变形行为的影响

徐洋，衣海龙，刘振宇，王国栋

《机械工程材料》

2011

硼含量及热处理对低碳贝氏体钢组织与性能的影响

张涛，侯华兴，衣海龙，陈军平，王小强，刘明

《金属热处理》

2011

超快冷技术在鞍钢Q550工程机械用钢生产中的应用

李凡，衣海龙，陈军平，刘振宇，王国栋

《轧钢》

DOI

2010

TT610L大梁钢冷弯裂纹原因分析

衣海龙，宋勇军，徐兆国，王国栋

《东北大学学报(自然科学版)》

2010

X100管线钢中的异常偏析带分析

周民，衣海龙，杜林秀，刘相华

《东北大学学报(自然科学版)》

2010

X100管线钢断口分层机理分析

任洪彪，周民，衣海龙，杜林秀，吴迪

《钢铁研究》

2010

控轧控冷双相高强度X100管线钢的组织与性能

周民，杜林秀，衣海龙，刘相华

《机械工程材料》

2010

低成本780 MPa级热轧高强钢的组织与性能

衣海龙，徐洋，徐兆国，刘振宇，王国栋

《机械工程材料》

2010

Development of Ti-Microalloyed 600 MPa hot rolled high strength steel

Hailong Yi, Zhenyu Liu, Guodong Wang, Di Wu

Journal of Iron and Steel Research International

DOI

2009

710MPa级热轧高强钢的组织性能

衣海龙，王晓南，杜林秀，王国栋

《东北大学学报(自然科学版)》

2009

X80管线钢落锤撕裂性能的影响因素分析

周民，杜林秀，衣海龙，刘相华

《钢铁研究学报》

2009

待温厚度与终轧温度对X80管线钢组织中马氏体/奥氏体岛的影响

衣海龙，麻庆申，杜林秀，刘相华，王国栋

《机械工程材料》

2009

显微组织对X80管线钢冲击性能的影响

衣海龙，麻庆申，杜林秀，刘相华，王国栋

《机械工程材料》

2009

Development of Nb-V-Ti hot-rolled high strength steel with fine ferrite and precipitation strengthening

Hailong Yi, Linxiu Du, Guodong Wang, Xianghua Liu

Journal of Iron and Steel Research International

DOI

2008

X80管线钢的组织与性能研究

衣海龙，杜林秀，王国栋，刘相华

《东北大学学报(自然科学版)》

2008

Strengthening Mechanism of a New 700 MPa Hot Rolled High Strength Steel

Hailong Yi, Linxiu Du, Guodong Wang, Xianghua Liu

Journal of Iron and Steel Research International

DOI

2007

铌钒钛与含钛高强钢的高温变形行为

衣海龙，杜林秀，王国栋，刘相华

《东北大学学报(自然科学版)》

2007

Influence of Holding Time After Deformation on Bainite Transformation in Niobium Microalloyed Steel

Hailong Yi, Linxiu Du, Guodong Wang, Xianghua Liu

Journal of Iron and Steel Research International

DOI

2006

Bainite Transformation Under Continuous Cooling of Nb-Microalloyed Low Carbon Steel

Hailong Yi, Linxiu Du, Guodong Wang, Xianghua Liu

Journal of Iron and Steel Research International

DOI

2006

Effects of Deformation on Bainite Transformation During Continuous Cooling of Low Carbon Steels

Linxiu Du, Hailong Yi, Hua Ding, Xianghua Liu, Guodong Wang

Journal of Iron and Steel Research International

DOI

2006

Development of a Hot-rolled Low Carbon Steel with High Yield Strength

Hailong Yi, Linxiu Du, Guodong Wang, Xianghua Liu

ISIJ International

DOI

2005

含铌微合金低碳钢的连续冷却过程的相变

衣海龙，杜林秀，王国栋，刘相华

《东北大学学报(自然科学版)》

精选作品

期刊论文

焊接热输入对工程装备用高强钢CGHAZ组织及性能的影响

Si/V ratio regulation enables enhanced cryogenic strength–ductility synergy in Fe–Co–Cr–V–Ni–Si metastable high entropy alloys

Heterogeneous microstructure fabricated by cryogenic rolling and annealing reinforced TRIP effect for superior cryogenic strength-ductility in Fe44Co36Cr10V10 HEA

Enhanced cryogenic tensile properties in a Fe-high-entropy alloy

Effect of Niobium Content on Microstructure Evolution, Mechanical Properties, and Phase Transformation Kinetics of an Automotive Beam Steel Under Continuous Cooling Conditions

The Influence of Welding Heat Input on the Impact Performance of an Automotive Beam Steel

Outstanding cryogenic tensile properties achieved in a Fe-high-entropy alloy

Cryo-pre-straining contributes to achieving high yield strength in high-entropy alloys

Grain refinement and strain delocalization in TRIP high-entropy alloys during hot deformation

Good strength-ductility synergy achieved in a Fe62Ni16Co9Mn9Ti3Si1 Fe-high-entropy alloy with heterogeneous structures

低成本900MPa级工程机械用钢连续冷却转变行为的研究

Tuning Microstructure and Mechanical Performance of a Co-Rich Transformation-Induced Plasticity High Entropy Alloy

CoCrFeNi高熵合金组织演变规律及再结晶动力学

High-Temperature Deformation Behaviors of the C-Doped and N-Doped High Entropy Alloys

A strategy for enhancing the mechanical property of the precipitation-strengthened medium-entropy alloy

Study on Diversified Carbide Precipitation in High‐Strength Low‐Alloy Steel during Tempering

Suppression of Austenite Grain Coarsening by Ferrite Pinning during Pseudo-carburizing Treatment

Microstructure Refinement of a Transformation-Induced Plasticity High-Entropy Alloy

1100 MPa级高强钢的低周疲劳行为

Significant Improvement the Mechanical Properties of CoCrNi Alloy by Tailoring a Dual FCC-Phase Structure

The microstructure evolution and tensile properties of medium-Mn steel heat-treated by a two-step annealing process

Hot Deformation and Dynamic Recrystallization Behavior of CoCrNi and (CoCrNi)94Ti3Al3 Medium Entropy Alloys

Effect of austenite stability on the hole expansion behavior of δ-TRIP steels

C-Mn-Ni高强钢的连续冷却相变研究

合金元素Cr、Ni和Mo对钒微合金钢动态再结晶行为的影响

Microstructure–mechanical property relationship in Ti–Mo microalloyed steel with random and interphase precipitates

Masing Behavior and Microstructural Change of Quenched and Tempered High-Strength Steel Under Low Cycle Fatigue

温度参数对Ti/Ti-Mo微合金钢力学性能及强化机制的影响

Influence of rolling temperature and cooling rate on nano-size carbides in a Ti-Mo microalloyed steel

Yield Strength Enhancement by Carbon Trapping in Ferrite of the Quenching and Partitioning Steel

淬火及回火工艺对中锰钢组织和性能的影响

钒微合金化中锰钢组织与性能研究

Ti-Mo微合金钢铁素体中的析出物

Mo-Ti微合化热轧高强钢的组织与性能

钛微合金化热轧双相钢的工艺研究

钛微合金化热轧TRIP钢的连续冷却相变研究

Effects of Deformation Temperature on Microstructure Evolution of a Nb and Ti Micro-alloyed TRIP Steel

热轧钛微合金化TRIP钢的组织与性能研究

超快冷+层流冷却工艺对Mn-Ti钢组织与性能影响

The blocking effects of interphase precipitation on dislocations’ movement in Ti-bearing micro-alloyed steels

Influence of Finishing Cooling Temperature and Holding Time on Nanometer-size Carbide of Nb-Ti Microalloyed Steel

Investigation of Precipitate in Polygonal Ferrite in a Ti-Microalloyed Steel Using TEM and APT

回火温度对低碳贝氏体高强度钢组织性能的影响

新一代TMCP工艺下热轧钢材显微组织的基本原理

轧后冷却方式对钛微合金高强钢组织性能的影响

超快冷工艺下600MPa高强钢的组织与性能

轧制工艺对Q690工程机械用钢低温冲击功的影响

超快冷工艺下780MPa级工程机械用钢的组织与性能

不同工艺下Nb-Ti微合金钢组织演变和析出行为

超快冷工艺下工程机械用550MPa级钢的组织与性能

钼对铌钛微合金钢高温变形行为的影响

硼含量及热处理对低碳贝氏体钢组织与性能的影响

超快冷技术在鞍钢Q550工程机械用钢生产中的应用

TT610L大梁钢冷弯裂纹原因分析

X100管线钢中的异常偏析带分析

X100管线钢断口分层机理分析

控轧控冷双相高强度X100管线钢的组织与性能

低成本780 MPa级热轧高强钢的组织与性能

Development of Ti-Microalloyed 600 MPa hot rolled high strength steel

710MPa级热轧高强钢的组织性能

X80管线钢落锤撕裂性能的影响因素分析

待温厚度与终轧温度对X80管线钢组织中马氏体/奥氏体岛的影响

显微组织对X80管线钢冲击性能的影响

Development of Nb-V-Ti hot-rolled high strength steel with fine ferrite and precipitation strengthening

X80管线钢的组织与性能研究

Strengthening Mechanism of a New 700 MPa Hot Rolled High Strength Steel

铌钒钛与含钛高强钢的高温变形行为

Influence of Holding Time After Deformation on Bainite Transformation in Niobium Microalloyed Steel

Bainite Transformation Under Continuous Cooling of Nb-Microalloyed Low Carbon Steel

Effects of Deformation on Bainite Transformation During Continuous Cooling of Low Carbon Steels

Development of a Hot-rolled Low Carbon Steel with High Yield Strength

含铌微合金低碳钢的连续冷却过程的相变

会议论文

Cr含量对钒氮微合金钢动态再结晶的影响

Ti-Nb微合金化热轧TRIP钢工艺模拟研究

Ti微合金化低碳钢的热变形抗力研究