陈湘茹｜上海大学｜学者主页

2026

船舶气缸套用灰铸铁成分对其微观组织的影响

姚李斌，牟乃健，郭佳琪，陈湘茹

《铸造工程》

2026

离心铸造球墨铸铁管的研究和生产现状及发展趋势

朱共澳，翟敢超，胡绍东，刘俊峰，薛纪二，陈湘茹，翟启杰

《上海金属》

DOI

2026

应用PMO改善ϕ250 mm SWRH82B硬线钢连铸坯质量

刘星辰，皮鹏飞，徐智帅，陈湘茹，翟启杰，刘海宁，刘键

《连铸》

2026

船舶动力缸套用材料研究与应用进展

薛宇杰，郑桦玲，孙腾腾，陈湘茹

《铸造工程》

2026

日韩船舶动力缸套力学性能对比研究

郑桦玲，孙腾腾，薛宇杰，陈湘茹

《铸造工程》

2026

船舶气缸套灰铸铁件的研究与生产

牟乃健，郭佳琪，姚李斌，陈湘茹

《铸造工程》

2026

船用缸套铸造工艺设计及生产实践

任建军，郭佳琪，张延泽，陈湘茹

《铸造工程》

2025

PMO对M2高速钢连铸坯凝固组织及碳化物析出的影响

朱守豪，刘海宁，徐智帅，李志聪，陈湘茹，翟启杰

《上海大学学报(自然科学版)》

2025

PMO对Cr8Mo2SiV钢锭凝固组织和偏析的影响

徐凡，陈湘茹，翟启杰

《上海大学学报(自然科学版)》

2025

不同微区分析方法在2205不锈钢固液界面偏析中的应用

张洪瑞，侯智伦，汪国祥，Hu Henry，陈湘茹，翟启杰

《热加工工艺》

DOI

2025

热处理工艺对ZGMn13Cr2高锰钢显微组织与力学性能的影响

左万基，陈湘茹

《上海金属》

DOI

2025

合金元素对高速钢中碳化物的影响研究进展

张世民，叶承欢，陈杨珉，陈湘茹，翟启杰

《中国材料进展》

2024

冷却速率对ZG40CrNi2Mo大型铸件凝固组织及元素偏析的影响

邹富康，仲红刚，李莉娟，龚永勇，陈湘茹，翟启杰

《热加工工艺》

2024

PMO对高速钢枝晶组织及碳化物的影响

刘海宁，陈杨珉，陈湘茹，李莉娟，翟启杰

《钢铁》

2024

电磁辅助优化高速钢组织与性能研究进展

叶承欢，张世民，朱守豪，陈湘茹，翟启杰

《中国冶金》

2024

Effect of Alloying and Microalloying Elements on Carbides of High-Speed Steel: An Overview

Yang-Min Chen, Chenghua Ye, Xiangru Chen, Qijie Zhai, Henry Hu

Metals

DOI

2024

Microstructure and wear resistance of high-carbon pearlitic CrMo wear-resistant cast steels containing submicron-sized precipitates

Long Zhao, Haining Liu, Yu Song, Ganchao Zhai, Xiangru Chen, Qijie Zhai

Journal of Materials Research and Technology

DOI

2024

Hot Tearing of Steel Under Different Dendritic Growth Directions

Zenghuang Lin, Tianyu Li, Xiangru Chen, Lijuan Li, Yu Zhao, Huazhi Yuan, Honggang Zhong, Qi-Jie Zhai, Qingyou Han

Metallurgical and Materials Transactions B

DOI

2024

Effect of cooling rate on solidification microstructure, microsegregation, and nanoprecipitates in medium carbon CrMo cast steel

Long Zhao, Yu Song, Ganchao Zhai, Haining Liu, Xiangru Chen, Qi-Jie Zhai

Journal of Materials Research and Technology

DOI

2024

Precipitation Behavior of TiN During the Solidification of High-Titanium Steel

Huazhi Yuan, Xiangru Chen, Lijuan Li, Xiangru Chen, H. Zhong, Qi-Jie Zhai

Metallurgical and Materials Transactions B

DOI

2024

Mechanical properties and impact abrasive wear resistance in vanadium microalloyed medium carbon CrMo cast steel strengthened with nanoprecipitates

Long Zhao, Haining Liu, Xiangru Chen, Ganchao Zhai, Qijie Zhai

Wear

DOI

2023

2205双相不锈钢连铸坯凝固组织热模拟实验设计

陈湘茹，赵龙，余海峰，翟启杰

《实验室研究与探索》

DOI

2023

Nb对高碳铬钼铸钢组织及性能的影响

侯智伦，赵龙，翟敢超，胡宏发，陈湘茹，翟启杰

《特种铸造及有色合金》

2023

连铸M2高速钢碳化物和宏观偏析热模拟

李志聪，陈杨珉，陈湘茹，仲红刚，李莉娟，翟启杰

《钢铁研究学报》

2023

Hot tearing behavior of AZ91D magnesium alloy

H. Zhong, Zenghuang Lin, Qing-You Han, Jiang-Feng Song, Meicheng Chen, Xiangru Chen, Lijuan Li, Qi-jie Zhai

Journal of Magnesium and Alloys

DOI

2023

A Homogenization Technology for Heavy Ingots – Hot-Top Pulsed Magneto-Oscillation

H. Zhong, Jian Huang, Ke Han, Xiangru Chen, Lixin Zhou, Zhi-Shuai Xu, Lijuan Li, Fan Zhang, Hua-Zhi Yuan, Ren-Xing Li, Qi-jie Zhai

Social Science Research Network

DOI

2022

激光诱导击穿光谱原位分析仪和电子探针在CrMo耐磨铸钢元素偏析分析中的联合应用

赵龙，张洪瑞，翟敢超，余海峰，陈湘茹，翟启杰

《冶金分析》

2022

钼、钒复合强化灰铸铁组织和性能研究

裴慧雯，李莉娟，李仁兴，陈湘茹，翟启杰

《铸造》

2022

铸铁物理冶金及铌微合金化

陈湘茹

《冶金工业出版社》

2021

回火后冷却方式对铬钼耐磨铸钢力学性能和显微组织的影响

马文高，陈湘茹，翟启杰

《上海金属》

2021

铌对球墨铸铁共晶温度和铸态组织的影响

吴家栋，陈杨珉，刘海宁，张云虎，陈湘茹，翟启杰

《上海金属》

2021

Influences of superheat and cooling intensity on macrostructure and macrosegregation of duplex stainless steel studied by thermal simulation

H. Zhong, Xiangru Chen, Yan-jie Liu, Zhiyuan Wei, Hai-feng Yu, Qi-jie Zhai

Journal of Iron and Steel Research International

DOI

2020

Study on Strengthening Mechanism of 9Cr-1.5Mo-1Co and 9Cr-3W-3Co Heat Resistant Steels

Long Zhao, Xiangru Chen, Tie-Ming Wu, Qi-jie Zhai

Materials

DOI

2019

Cr/C比对中铬铸铁复合抗磨辊圈组织和耐磨性的影响

翟晨晨，苏恒渤，郭嘉，苏月莹，陈湘茹，翟启杰

《铸造技术》

DOI

2019

Molybdenum alloying in cast iron and steel

Xiangru Chen, Q. Zhai, Han Dong, Bao-Ying Dai, H. Mohrbacher

Advances in Manufacturing

DOI

2019

Hexagonal Closed-Packed Precipitation Enhancement in a NbTiHfZr Refractory High-Entropy Alloy

Yu.E. Ma, Shi-Wei Wu, Y. Jia, P. Hu, Ye-Qiang Bu, Xiangru Chen, G. Wang, Jia-Bin Liu, Hongtao Wang, Qi-jie Zhai

Metals

DOI

2019

Grain Refinement of AZ91 Magnesium Alloy Induced by Al-V-B Master Alloy

W. Chang, Yanping Shen, Yu-Ping Su, Long Zhao, Yun-Hu Zhang, Xiangru Chen, Ming Sun, Ji-Chun Dai, Qi-jie Zhai

Metals

DOI

2019

Effects of niobium alloying on microstructure, toughness and wear resistance of austempered ductile iron

Xiangru Chen, Long Zhao, Wei Zhang, H. Mohrbacher, Wen-Jun Wang, Ai'min Guo, Qi-jie Zhai

Materials Science & Engineering: A

DOI

2018

N含量对Fe-21Cr-3Ni-1Mo-N双相不锈钢组织的影响

危志强，陈湘茹，仲红刚，翟启杰

《上海大学学报(自然科学版)》

2018

中铬铸铁磨辊成分优化前后的组织与性能

吴铁明，徐阳，陈湘茹

《上海金属》

2017

热处理工艺对耐磨Cr-Mo铸钢组织和硬度的影响

许婕，陈湘茹，刁晓刚，张伟，郭爱民

《上海金属》

2017

CB2耐热铸钢非金属夹杂物研究

吴铁明，徐阳，徐德民，陈湘茹

《上海金属》

2017

GX4CrNi13-4铸钢非金属夹杂物的消除及其对性能的影响

吴铁明，徐阳，任朝阳，张伟，陈湘茹，翟启杰

《铸造》

2017

Effects of niobium addition on microstructure and tensile behavior of as-cast ductile iron

Xiangru Chen, Jie Xu, Henry Hu, H. Mohrbacher, Ming Kang, Wei Zhang, Ai'min Guo, Qi-jie Zhai

DOI

2017

鋳放し球状黒鉛鋳鉄のミクロ組織と引張挙動に及ぼすニオブ添加の影響【Powered by NICT】

Xiangru Chen, Jie Xu, H. Henry, M. Hardy, Ming Kang, Wei Zhang, Ai'min Guo, Qi-jie Zhai

2017

Reduced Fracture Toughness of Metallic Glass at Cryogenic Temperature

Yi-Hao Zhou, Jiaxin Liu, Dong-Xue Han, Xiangru Chen, Gang Wang, Qi-jie Zhai

DOI

2017

Hot tearing susceptibility of Fe-20. 96Cr-2. 13Ni-0. 15N-4. 76Mn-0. 01Mo duplex stainless steel

Zhi-Qiang Wei, Xiangru Chen, H. Zhong, Qi-jie Zhai, G. Wang

DOI

2017

Influence of Growth Velocity on the Separation of Primary Silicon in Solidified Al-Si Hypereutectic Alloy Driven by a Pulsed Electric Current

Yun-Hu Zhang, Chun-Yang Ye, Yan-Yi Xu, H. Zhong, Xiangru Chen, X. Miao, Chang-Jiang Song, Qi-jie Zhai

DOI

2016

In Situ Observation of Crystal Rain and Its Effect on Columnar to Equiaxed Transition

H. Zhong, Yun-Hu Zhang, Xiangru Chen, Cong-Sen Wu, Zhi-Qiang Wei, Qi-jie Zhai

DOI

2016

Niobium in cast irons

Xiangru Chen, Yang Xu, Wei Zhang, Ai'min Guo, Qi-jie Zhai

DOI

2016

Thermal simulation of continuous casting solidification process for a 2205 duplex stainless steel

Xiangru Chen, Qi-jie Zhai

2016

A Thermal Simulation Method for Solidification Process of Steel Slab in Continuous Casting

H. Zhong, Xiangru Chen, Qingyou Han, K. Han, Qi-jie Zhai

Metallurgical and Materials Transactions B

DOI

2015

铌对高性能球墨铸铁微观组织的影响

常亮，张伟，杨超，陈湘茹，华勤，翟启杰

《上海金属》

2015

72. The Influence of Niobium on the Microstructure and Properties of Crmo Steel

Xiangru Chen, Ming You, Ai'min Guo, Wei Zhang, Haicheng Li, Yang Xu, Qi-jie Zhai

DOI

2015

Effects of Niobium Microalloying on the Pearlite of Ductile Iron

Chao Yang, Wei Zhang, Haicheng Li, Xiangru Chen, Qi-jie Zhai

DOI

2014

不同冷却速率下低压转子钢30Cr2Ni4MoV的凝固组织

叶经政，陈湘茹，仲红刚，翟启杰

《上海金属》

2014

Effect of Niobium on the Morphology of Nodular Graphite in Ductile Iron

Yong-Shen Yan, Liang Chang, Xiangru Chen, Q. Hua, Qi-jie Zhai

DOI

2014

Effects of Niobium Alloying on the Micostructure and Mechanical Properties of Bainite Ductile Iron

Liang Chang, Yong-Shen Yan, Xiangru Chen, Q. Hua, Qi-jie Zhai

DOI

2013

Al-Cu合金水平单向凝固组织预测及实验观察

仲红刚，曹欣，陈湘茹，张捷宇，翟启杰

《中国有色金属学报》

2013

2205双相不锈钢连铸凝固组织热模拟研究

陈湘茹

《上海大学》

2013

Effect of Forced Convection on Grain Refinement of S32205 Duplex Stainless Steel

Xiangru Chen, H. Zhong, Chang-Jiang Song, Q. Zhai

DOI

2012

节约型双相不锈钢性能与研究状况

孙卿卿，仲红刚，曹欣，陈湘茹，翟启杰

《上海金属》

2012

Continuous Casting Simulation of 2304 Duplex Stainless Steel Via Horizontal Directional Solidification Technique

Qing-Qing Sun, H. Zhong, Xiangru Chen, Qi-jie Zhai

DOI

2011

双相不锈钢的研究与发展

李志军，陈湘茹，孙卿卿，张文竹，翟启杰，王玉柱

《铸造技术》

2011

Experimental Simulation on the Continuous Casting Solidified Structure of S32205 Duplex Stainless Steel

Xiangru Chen, Qing-Qing Sun, L. Ao, H. Zhong, Hong-Xing Zheng, Zhi-Jun Li, Qi-jie Zhai

DOI

2011

Effect of Stirring on the Solidification Structure and Segregation of 60Si2MnA Spring Steel during Continuous Casting

L. Ao, Xiangru Chen, H. Zhong, Qing-Qing Sun, Hong-Xing Zheng, Zhi-Jun Li, Qi-jie Zhai

DOI

2010

过热度对60Si2MnA弹簧钢连铸坯凝固组织的影响

敖鹭，仲红刚，陈湘茹，宋长江，翟启杰

《钢铁》

2008

球墨铸铁的脉冲电流退火处理

李青春，常国威，李仁兴，陈湘茹，翟启杰

《材料热处理学报》

DOI

2008

脉冲电流对球墨铸铁退火组织与性能的影响

李青春，陈湘茹，常国威，翟启杰

《工程科学学报》

精选作品

期刊论文

船舶气缸套用灰铸铁成分对其微观组织的影响

离心铸造球墨铸铁管的研究和生产现状及发展趋势

应用PMO改善ϕ250 mm SWRH82B硬线钢连铸坯质量

船舶动力缸套用材料研究与应用进展

日韩船舶动力缸套力学性能对比研究

船舶气缸套灰铸铁件的研究与生产

船用缸套铸造工艺设计及生产实践

PMO对M2高速钢连铸坯凝固组织及碳化物析出的影响

PMO对Cr8Mo2SiV钢锭凝固组织和偏析的影响

不同微区分析方法在2205不锈钢固液界面偏析中的应用

热处理工艺对ZGMn13Cr2高锰钢显微组织与力学性能的影响

合金元素对高速钢中碳化物的影响研究进展

冷却速率对ZG40CrNi2Mo大型铸件凝固组织及元素偏析的影响

PMO对高速钢枝晶组织及碳化物的影响

电磁辅助优化高速钢组织与性能研究进展

Effect of Alloying and Microalloying Elements on Carbides of High-Speed Steel: An Overview

Microstructure and wear resistance of high-carbon pearlitic CrMo wear-resistant cast steels containing submicron-sized precipitates

Hot Tearing of Steel Under Different Dendritic Growth Directions

Effect of cooling rate on solidification microstructure, microsegregation, and nanoprecipitates in medium carbon CrMo cast steel

Precipitation Behavior of TiN During the Solidification of High-Titanium Steel

Mechanical properties and impact abrasive wear resistance in vanadium microalloyed medium carbon CrMo cast steel strengthened with nanoprecipitates

2205双相不锈钢连铸坯凝固组织热模拟实验设计

Nb对高碳铬钼铸钢组织及性能的影响

连铸M2高速钢碳化物和宏观偏析热模拟

Hot tearing behavior of AZ91D magnesium alloy

A Homogenization Technology for Heavy Ingots – Hot-Top Pulsed Magneto-Oscillation

激光诱导击穿光谱原位分析仪和电子探针在CrMo耐磨铸钢元素偏析分析中的联合应用

钼、钒复合强化灰铸铁组织和性能研究

铸铁物理冶金及铌微合金化

回火后冷却方式对铬钼耐磨铸钢力学性能和显微组织的影响

铌对球墨铸铁共晶温度和铸态组织的影响

Influences of superheat and cooling intensity on macrostructure and macrosegregation of duplex stainless steel studied by thermal simulation

Study on Strengthening Mechanism of 9Cr-1.5Mo-1Co and 9Cr-3W-3Co Heat Resistant Steels

Cr/C比对中铬铸铁复合抗磨辊圈组织和耐磨性的影响

Molybdenum alloying in cast iron and steel

Hexagonal Closed-Packed Precipitation Enhancement in a NbTiHfZr Refractory High-Entropy Alloy

Grain Refinement of AZ91 Magnesium Alloy Induced by Al-V-B Master Alloy

Effects of niobium alloying on microstructure, toughness and wear resistance of austempered ductile iron

N含量对Fe-21Cr-3Ni-1Mo-N双相不锈钢组织的影响

中铬铸铁磨辊成分优化前后的组织与性能

热处理工艺对耐磨Cr-Mo铸钢组织和硬度的影响

CB2耐热铸钢非金属夹杂物研究

GX4CrNi13-4铸钢非金属夹杂物的消除及其对性能的影响

Effects of niobium addition on microstructure and tensile behavior of as-cast ductile iron

鋳放し球状黒鉛鋳鉄のミクロ組織と引張挙動に及ぼすニオブ添加の影響【Powered by NICT】

Reduced Fracture Toughness of Metallic Glass at Cryogenic Temperature

Hot tearing susceptibility of Fe-20. 96Cr-2. 13Ni-0. 15N-4. 76Mn-0. 01Mo duplex stainless steel

Influence of Growth Velocity on the Separation of Primary Silicon in Solidified Al-Si Hypereutectic Alloy Driven by a Pulsed Electric Current

In Situ Observation of Crystal Rain and Its Effect on Columnar to Equiaxed Transition

Niobium in cast irons

Thermal simulation of continuous casting solidification process for a 2205 duplex stainless steel

A Thermal Simulation Method for Solidification Process of Steel Slab in Continuous Casting

铌对高性能球墨铸铁微观组织的影响

72. The Influence of Niobium on the Microstructure and Properties of Crmo Steel

Effects of Niobium Microalloying on the Pearlite of Ductile Iron

不同冷却速率下低压转子钢30Cr2Ni4MoV的凝固组织

Effect of Niobium on the Morphology of Nodular Graphite in Ductile Iron

Effects of Niobium Alloying on the Micostructure and Mechanical Properties of Bainite Ductile Iron

Al-Cu合金水平单向凝固组织预测及实验观察

2205双相不锈钢连铸凝固组织热模拟研究

Effect of Forced Convection on Grain Refinement of S32205 Duplex Stainless Steel

节约型双相不锈钢性能与研究状况

Continuous Casting Simulation of 2304 Duplex Stainless Steel Via Horizontal Directional Solidification Technique

双相不锈钢的研究与发展

Experimental Simulation on the Continuous Casting Solidified Structure of S32205 Duplex Stainless Steel

Effect of Stirring on the Solidification Structure and Segregation of 60Si2MnA Spring Steel during Continuous Casting

过热度对60Si2MnA弹簧钢连铸坯凝固组织的影响

球墨铸铁的脉冲电流退火处理

脉冲电流对球墨铸铁退火组织与性能的影响

会议论文

连铸钢坯凝固过程热模拟