张定华

期刊论文

1. 史恺宁，李虎虎，何喆，牛湛皓，张定华（2026）. γ-TiAl合金涡轮叶片榫头缓进成形磨削工艺参数对表面完整性的影响研究. 《燃气涡轮试验与研究》.
2. Shipeng Cao, You-Gang Bian, Guang-Cai Wang, Hong-Mao Qin, Manjiang Hu, Dinghua Zhang, Ding-Jie Wang, Rong-Jun Ding (2026). Joint calibration of DVL misalignment and anisotropic scale factors using lie algebra-based adaptive optimization. Ocean Engineering.DOI
3. Yifei Zhang, Chunhui He, Dinghua Zhang, Ming Luo (2026). Tool-wear-aware deformation prediction of thin-walled parts in multi-stage milling. International Journal of Mechanical Sciences.DOI
4. Yifei Zhang, Jiale Pan, Chunhui He, Ming Luo, Dinghua Zhang (2026). An adaptive control method of supporting force for fixtures in multi-process milling of thin-walled ring parts. Journal of Manufacturing Processes.DOI
5. Ying Zhang, Rui Pang, Dinghua Zhang, Weihong Xia (2025). Machining parameters optimization for free-form blade milling based on time-position mapping of process signals. International Journal Of Computer Integrated Manufacturing.DOI
6. 沈雪红，徐龙，韩栋，关艳英，张定华（2025）. TC17钛合金材料Johnson-Cook本构模型应用于切削加工的精确性研究. 《工具技术》.
7. Xuehong Shen, Hui Yang, Guan Yanying, Dong Hwan Han, Zhang Dinghua (2025). Influence of surface integrity on fatigue life of milling processing of thin walled titanium alloy blades. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
8. Zhijian Tao, Zenghuan Hou, Yanan Wang, Yu Xin Sun, Junde Qi, Dinghua Zhang (2025). On-machine measurement and quantitative evaluation of belt wear in robotic grinding using line structured light scanning. Journal of Manufacturing Processes.DOI
9. Zhuang Mao, Ming Luo, Dinghua Zhang (2025). Tool wear prediction through a physics-assisted method using few-sensor monitoring data. The International Journal of Advanced Manufacturing Technology.DOI
10. 张定华，何智伟，张学宝，罗明（2024）. 叶片多尺度表面对压气机气动性能影响及其高性能制造研究进展. 《航空学报》.
11. 罗健鑫，王彦菊，崔敏超，姚倡锋，沙爱学，张定华（2024）. 空化水喷丸表面改性技术研究进展综述. 《航空制造技术》.
12. 张仲玺，王帅钦，赵慧娟，张定华，汪龙皓（2024）. 薄壁零件残余应力演化机理及变形控制方法. 《航空学报》.
13. 池亚达，崔敏超，罗明，李文亚，张定华（2024）. 基于冷喷涂的航空再制造技术研究现状及展望. 《航空工程进展》.
14. Kunpeng Han, Liang Tan, Changfeng Yao, Dinghua Zhang (2024). Study on the surface state induced by ultrasonic impact treatment and its influence on high-temperature tension-tension fatigue behavior. Journal of Alloys and Compounds.DOI
15. Zhijian Tao, Zenghuan Hou, Yinghong Deng, Dinghua Zhang, Junde Qi (2024). Quantitative evaluation of pyramid belt wear using light-reflection characteristic of agglomerate coating and image processing. Measurement.DOI
16. Yada Chi, Zexuan Dong, Minchao Cui, Chenwei Shan, Yifeng Xiong, Dinghua Zhang, Ming Luo (2024). Comparative study on machinability and surface integrity of γ-TiAl alloy in laser assisted milling. Journal of Materials Research and Technology.DOI
17. Zhao Zhang, Long Jia, Ming Luo, Baohai Wu, Dinghua Zhang (2024). A data-driven method for prediction of surface roughness with consideration of milling tool wear. The International Journal of Advanced Manufacturing Technology.DOI
18. Changfeng Yao, Yunqi Sun, Liang Tan, Minchao Cui, Dinghua Zhang, Junxue Ren (2024). Investigation of control method on blade shape accuracy of blisk in vibration finishing. Advances in Manufacturing.DOI
19. Chang Fan, Zhao Zhang, Dinghua Zhang, Ming Luo (2024). Tool wear prediction based on a fusion model of data-driven and physical models in the milling process. The International Journal of Advanced Manufacturing Technology.DOI
20. Zhijian Tao, Zehang Qin, Xudong Luo, Junde Qi, Xiaolong Hu, Dinghua Zhang (2024). Analysis of abrasive belt wear effect on residual stress distribution in robotic belt grinding of GH4169. The International Journal of Advanced Manufacturing Technology.DOI
21. Wenguang Ye, Hao Dou, Jun Liu, Zhixiang Li, Yunyong Cheng, Dinghua Zhang, Fuqiang Yang, Shikai Jing (2024). Additive manufacture of programmable multi-matrix continuous carbon fiber reinforced gradient composites. Additive manufacturing.DOI
22. Kunpeng Han, Liang Tan, Changfeng Yao, Dinghua Zhang (2024). Evolution and anti-fatigue mechanism of surface characteristics of Ti60 alloy induced by ball burnishing and shot peening during tensile-compression fatigue. Engineering Failure Analysis.DOI
23. Huan Luo, Jing Li, Dinghua Zhang, Ming Luo (2024). Evolutions of multidimensional wear features in ball-end milling of Ni-based superalloy GH4169. The International Journal of Advanced Manufacturing Technology.DOI
24. Chang Fan, Wuyang Sun, Zhao Zhang, Dinghua Zhang, Zaifei Zhou, Ming Luo (2024). A research on metal sealing ring forming process database system and its application. International Journal of Manufacturing Research.DOI
25. Menghua Zhang, Chenwei Shan, Ziwen Xia, Ming Luo, Dinghua Zhang (2023). Scratch-induced surface formation mechanism in C/SiC composites. International Journal of Mechanical Sciences.DOI
26. Wenguang Ye, Hao Dou, Dinghua Zhang, Fuqiang Yang, Yunyong Cheng, Wenfeng Cai (2023). Effects of process parameters on mechanical properties and interface of 3D printed bamboo‐inspired CCFR‐PLA / TPU composites. Polymer Composites.DOI
27. Wenguang Ye, Yunyong Cheng, Hao Dou, Dinghua Zhang, Fuqiang Yang, Zhixiang Li, Wenfeng Cai (2023). Low-velocity impact response and compression behaviour after the impact of 3D-printed CCFR self-sensing honeycomb structures. Composites Part B Engineering.DOI
28. Chang Fan, Zhao Zhang, Dinghua Zhang, Ming Luo (2023). Research on tool wear modeling of superalloy based on evolutionary cluster analysis. The International Journal of Advanced Manufacturing Technology.DOI
29. Wenguang Ye, Hao Dou, Dinghua Zhang, Yunyong Cheng, Fuqiang Yang, Stephan Rudykh (2023). Compressive performance of 3D printed fault‐tolerant polymer lattice structures. Polymer Engineering and Science.DOI
30. Zhongxi Zhang, Longhao Wang, Shuaiqin Wang, Dinghua Zhang, Aituan Jiang (2023). A novel deflection control method for the asymmetric thin-walled component by optimizing the feed rate of the finishing process. The International Journal of Advanced Manufacturing Technology.DOI
31. Zequan Yao, Jingyuan Shen, Ming Wu, Dinghua Zhang, Ming Luo (2023). Position-dependent milling process monitoring and surface roughness prediction for complex thin-walled blade component. Mechanical Systems and Signal Processing.DOI
32. Guangxin Liu, Dinghua Zhang, Changfeng Yao (2023). Investigation of the grain refinement mechanism in machining Ti-6Al-4V: Experiments and simulations. Journal of Manufacturing Processes.DOI
33. Zhao Zhang, Feng JIANG, Ming Luo, Baohai Wu, Dinghua Zhang, Kai TANG (2023). Geometric error measuring, modeling, and compensation for CNC machine tools: A review. Chinese Journal of Aeronautics.DOI
34. Jia Ge, Ming Luo, Dinghua Zhang, G. Catalanotti, Brian George Falzon, John McClelland, Colm Higgins, Yan Jin, Dan Sun (2023). Temperature field evolution and thermal-mechanical interaction induced damage in drilling of thermoplastic CF/PEKK – A comparative study with thermoset CF/epoxy. Journal of Manufacturing Processes.DOI
35. Jia Ge, Wenchang Zhang, Ming Luo, G. Catalanotti, Brian George Falzon, Colm Higgins, Dinghua Zhang, Yan Jin, Dan Sun (2023). Multi-objective optimization of thermoplastic CF/PEKK drilling through a hybrid method: An approach towards sustainable manufacturing. Composites Part A Applied Science and Manufacturing.DOI
36. Wuyang Sun, Yifei Zhang, Ming Luo, Zhao Zhang, Dinghua Zhang (2022). A multi-criteria decision-making system for selecting cutting parameters in milling process. Journal Of Manufacturing Systems, Vol. 650.DOI
37. Jia Zheng, Yuanxi Sun, Zhiyong Luo, Dinghua Zhang (2022). High precision post-processing framework for industrial computed tomography detection. Expert Systems With Applications, Vol. 192.DOI
38. Fuqiang Yang, Dinghua Zhang, Kuidong Huang, Yao Yang, Zhixiang Li (2022). Complex artefact suppression for sparse reconstruction based on compensation approach in X‐ray computed tomography. IET Image Processing.DOI
39. Kuidong Huang, Zongzhao Gao, Fuqiang Yang, Hua Zhang, Dinghua Zhang (2022). An Improved Discrete Algebraic Reconstruction Technique for Limited-View Based on Gray Mean Value Guidance. Journal of Nondestructive Evaluation.DOI
40. Xuehong Shen, Changfeng Yao, Liang Tan, Dinghua Zhang (2022). Prediction model of surface integrity characteristics in ball end milling TC17 titanium alloy. Advances in Manufacturing.DOI
41. Hao Dou, Wenguang Ye, Dinghua Zhang, Chenhao Wu, Kuidong Huang, Tianyu Sun, Yunyong Cheng (2022). Three‐Point Bending Properties of 3D‐Printed Continuous Carbon Fiber Reinforced Heterogeneous Composites Based on Fiber Content Gradients. Advanced Engineering Materials.DOI
42. Wenguang Ye, Hao Dou, Yunyong Cheng, Dinghua Zhang, Sheng Yao Lin (2022). Mechanical and self‐sensing properties of 3D printed continuous carbon fiber reinforced composites. Polymer Composites.DOI
43. Huan Luo, Zhao Zhang, Ming Luo, Dinghua Zhang (2022). A comparative study of force models in monitoring the flank wear using the cutting force coefficients. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science.DOI
44. Fuqiang Yang, Dinghua Zhang, Kuidong Huang, Yao Yang (2022). Iterative excitation with noise rejection techniques for X-ray computed tomography of hollow turbine blades. Nondestructive Testing And Evaluation.DOI
45. Haorong Guo, Minchao Cui, Zhongqi Feng, Dacheng Zhang, Dinghua Zhang (2022). Classification of Aviation Alloys Using Laser-Induced Breakdown Spectroscopy Based on a WT-PSO-LSSVM Model. Chemosensors.DOI
46. Xuehong Shen, Dinghua Zhang, Changfeng Yao, Liang Tan, Xiangyu Li (2022). Research on parameter identification of Johnson–Cook constitutive model for TC17 titanium alloy cutting simulation. Materials Today Communications.DOI
47. Xi Chen, Zhao Zhang, Qi Wang, Dinghua Zhang, Ming Luo (2022). Cutting force prediction between different machine tool systems based on transfer learning method. The International Journal of Advanced Manufacturing Technology.DOI
48. Haorong Guo, Zhongqi Feng, Minchao Cui, Yoshihiro Deguchi, Liang Tan, Dacheng Zhang, Changfeng Yao, Dinghua Zhang (2022). Rapid Analysis of Steel Powder for 3D Printing Using Laser-Induced Breakdown Spectroscopy. ISIJ International.DOI
49. Hao Dou, Wenguang Ye, Dinghua Zhang, Yunyong Cheng, Chenhao Wu (2022). Comparative study on in-plane compression properties of 3D printed continuous carbon fiber reinforced composite honeycomb and aluminum alloy honeycomb. Thin-Walled Structures.DOI
50. Zhijian Tao, Shan Li, Lu Zhang, Junde Qi, Dinghua Zhang (2022). Surface roughness prediction in robotic belt grinding based on the undeformed chip thickness model and GRNN method. The International Journal of Advanced Manufacturing Technology.DOI
51. Wenguang Ye, Hao Dou, Yunyong Cheng, Dinghua Zhang (2022). Self-sensing properties of 3D printed continuous carbon fiber-reinforced PLA/TPU honeycomb structures during cyclic compression. Materials Letters.DOI
52. Zhuang Mao, Ming Luo, Dinghua Zhang (2022). Tool wear prediction at different cutting edge locations for ball-end cutter in milling of Ni-based superalloy freeform surface part. The International Journal of Advanced Manufacturing Technology.DOI
53. Kunpeng Han, Liang Tan, Changfeng Yao, Dinghua Zhang, Zheng Zhou (2022). Studies on the surface characteristics of Ti60 alloy induced by turning combined with ball burnishing. Journal of Manufacturing Processes.DOI
54. Xi Chen, Zhao Zhang, Qi Wang, Dinghua Zhang, Ming Luo (2022). A new method for prediction of cutting force considering the influence of machine tool system and tool wear. The International Journal of Advanced Manufacturing Technology.DOI
55. Dongsheng Liu, Ming Luo, Urbikain Pelayo, Daniel Olvera Trejo, Dinghua Zhang (2021). Position-oriented process monitoring in milling of thin-walled parts. Journal Of Manufacturing Systems, Vol. 600.DOI
56. 韩坤鹏，张定华，姚倡锋，谭靓，周征（2021）. 滚压强化表面状态特征的疲劳演化及抗疲劳机制研究进展. 《航空学报》.
57. LIU Guangxin, Zhang Dinghua, Yao Changfeng (2021). Research Progress of the Microstructure on Machined Surface of Titanium Alloys. Journal of Mechanical Engineering.DOI
58. Kunpeng Han, Dinghua Zhang, Changfeng Yao, Liang Tan, Zheng Zhou, Yu Feng Zhao (2021). Studies and Optimization of Surface Roughness and Residual Stress in Ball Burnishing of Ti60 Alloy. Journal of Materials Engineering and Performance.DOI
59. Hao Dou, Wenguang Ye, Dinghua Zhang, Yunyong Cheng, Kuidong Huang, Fuqiang Yang, Stephan Rudykh (2021). Research on drop-weight impact of continuous carbon fiber reinforced 3D printed honeycomb structure. Materials Today Communications.DOI
60. Hao Dou, Wenguang Ye, Dinghua Zhang, Yunyong Cheng, Yiran Tian (2021). Compression Performance with Different Build Orientation of Fused Filament Fabrication Polylactic Acid, Acrylonitrile Butadiene Styrene, and Polyether Ether Ketone. Journal of Materials Engineering and Performance.DOI
61. Dongsheng Liu, Ming Luo, Zhao Zhang, Yuan Hu, Dinghua Zhang (2021). Operational modal analysis based dynamic parameters identification in milling of thin-walled workpiece. Mechanical Systems and Signal Processing.DOI
62. Zequan Yao, Chang Fan, Zhao Zhang, Dinghua Zhang, Ming Luo (2021). Position-varying surface roughness prediction method considering compensated acceleration in milling of thin-walled workpiece. Frontiers of Mechanical Engineering.DOI
63. Zhao Zhang, Zepeng Liang, Ming Luo, Baohai Wu, Dinghua Zhang (2021). A general method for calibration of milling force coefficients and cutter runout parameters simultaneously for helical end milling. The International Journal of Advanced Manufacturing Technology.DOI
64. Liang Tan, Changfeng Yao, Dinghua Zhang, Minchao Cui, Xuehong Shen (2021). Effects of tool wear on machined surface integrity during milling of Inconel 718. The International Journal of Advanced Manufacturing Technology.DOI
65. Kunpeng Han, Dinghua Zhang, Changfeng Yao, Liang Tan, Zheng Zhou, Yu Feng Zhao (2021). Analytical modeling of through depth strain induced by deep rolling. The Journal of Strain Analysis for Engineering Design.DOI
66. Guangxin Liu, Dinghua Zhang, Changfeng Yao (2021). A modified constitutive model coupled with microstructure evolution incremental model for machining of titanium alloy Ti–6Al–4V. Journal of Materials Processing Technology.DOI
67. Junde Qi, Bing Chen, Dinghua Zhang (2021). A Calibration Method for Enhancing Robot Accuracy Through Integration of Kinematic Model and Spatial Interpolation Algorithm. Journal of Mechanisms and Robotics.DOI
68. Minchao Cui, Yoshihiro Deguchi, Guoxi Li, Zhenzhen Wang, Haorong Guo, Zixiong Qin, Changfeng Yao, Dinghua Zhang (2021). Determination of manganese in submerged steel using Fraunhofer-type line generated by long-short double-pulse laser-induced breakdown spectroscopy. Spectrochimica Acta Part B Atomic Spectroscopy.DOI
69. Baohai Wu, Hai Hui Zheng, Ying Zhang, Ming Luo, Dinghua Zhang (2021). A Model Reconstruction Method of Blade Repair Based on Linear Combination. International Journal of Precision Engineering and Manufacturing.DOI
70. Yaohua Hou, Dinghua Zhang, Ying Zhang, Baohai Wu (2021). The variable radial depth of cut in finishing machining of thin-walled blade based on the stable-state deformation field. The International Journal of Advanced Manufacturing Technology.DOI
71. Xuehong Shen, Dinghua Zhang, Changfeng Yao, Liang Tan, Hongjian Yao (2021). Formation mechanism of surface metamorphic layer and influence rule on milling TC17 titanium alloy. The International Journal of Advanced Manufacturing Technology.DOI
72. 王晶，罗明，张定华，陈冰（2020）. 自由曲面侧铣刀具轮廓与轨迹同步优化方法. 《航空学报》.
73. Zequan Yao, Ming Luo, Jiawei Mei, Dinghua Zhang (2020). Position dependent vibration evaluation in milling of thin-walled part based on single-point monitoring. Measurement.DOI
74. Xuehong Shen, Dinghua Zhang, Liang Tan (2020). Effects of cutter path orientations on milling force, temperature, and surface integrity when ball end milling of TC17 alloy. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
75. Bing Chen, Junde Qi, Dinghua Zhang (2020). An adaptive parameters adjustment and planning method for robotic belt grinding using modified quality model. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
76. Zhongxi Zhang, Zhao Zhang, Dinghua Zhang, Ming Luo (2020). Milling distortion prediction for thin-walled component based on the average MIRS in specimen machining. The International Journal of Advanced Manufacturing Technology.DOI
77. Zhongxi Zhang, Ming Luo, Kai Tang, Dinghua Zhang (2020). A new in-processes active control method for reducing the residual stresses induced deformation of thin-walled parts. Journal of Manufacturing Processes.DOI
78. Junde Qi, Bing Chen, Dinghua Zhang (2020). Multi-information fusion-based belt condition monitoring in grinding process using the improved-Mahalanobis distance and convolutional neural networks. Journal of Manufacturing Processes.DOI
79. Xiaodong Zhang, Ce Han, Ming Luo, Dinghua Zhang (2020). Tool Wear Monitoring for Complex Part Milling Based on Deep Learning. Applied Sciences.DOI
80. Hao Dou, Yunyong Cheng, Wenguang Ye, Dinghua Zhang, Junjie Li, Zhoujun Miao, Stephan Rudykh (2020). Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites. Materials.DOI
81. Kunpeng Han, Dinghua Zhang, Changfeng Yao, Liang Tan, Zheng Zhou, Yu Feng Zhao (2020). Investigation of residual stress distribution induced during deep rolling of Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
82. Zhao Zhang, Ming Luo, Baohai Wu, Dinghua Zhang (2020). Dynamic modeling and stability prediction in milling process of thin-walled workpiece with multiple structural modes. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
83. Ce Han, Ming Luo, Dinghua Zhang (2020). Optimization of varying-parameter drilling for multi-hole parts using metaheuristic algorithm coupled with self-adaptive penalty method. Applied Soft Computing.DOI
84. Liang Tan, Changfeng Yao, Dinghua Zhang, Junxue Ren, Xuehong Shen, Zheng Zhou (2020). Effects of different mechanical surface treatments on surface integrity of TC17 alloys. Surface and Coatings Technology.DOI
85. Fuqiang Yang, Dinghua Zhang, Hua Zhang, Kuidong Huang, You Du (2020). Fusion reconstruction algorithm to ill-posed projection (FRAiPP) for artifacts suppression on X-ray computed tomography. Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment.DOI
86. Liang Tan, Changfeng Yao, Dinghua Zhang, Junxue Ren, Zheng Zhou, Jiyin Zhang (2020). Evolution of surface integrity and fatigue properties after milling, polishing, and shot peening of TC17 alloy blades. International Journal of Fatigue.DOI
87. Wuyang Sun, Ming Luo, Dinghua Zhang (2020). Machining vibration monitoring based on dynamic clamping force measuring in thin-walled components milling. The International Journal of Advanced Manufacturing Technology.DOI
88. Junde Qi, Bing Chen, Dinghua Zhang (2020). Compensation for absolute positioning error of industrial robot considering the optimized measurement space. International Journal of Advanced Robotic Systems.DOI
89. Qi Yao, Ming Luo, Dinghua Zhang (2020). Milling dynamic model based on rotatory Euler–Bernoulli beam model under distributed load. Applied Mathematical Modelling.DOI
90. Fuqiang Yang, Dinghua Zhang, Hua Zhang, Kuidong Huang, Mingxuan Teng, You Wei Du (2019). High quality x-ray imaging based on cumulation of forward projection of computed tomography. Tenth International Conference on Information Optics and Photonics.DOI
91. Fuqiang Yang, Dinghua Zhang, Hua Zhang, Kuidong Huang (2019). Cupping artifacts correction for polychromatic X-ray cone-beam computed tomography based on projection compensation and hardening behavior. Biomedical Signal Processing and Control.DOI
92. Qi Wang, Dinghua Zhang, Kai Tang, Ying Zhang (2019). Energy consumption model for milling processes considering auxiliary load loss and its applications. The International Journal of Advanced Manufacturing Technology.DOI
93. Qi Wang, Dinghua Zhang, Bing Chen, Ying Zhang, Baohai Wu (2019). Energy Consumption Model for Drilling Processes Based on Cutting Force. Applied Sciences.DOI
94. Liang Tan, Dinghua Zhang, Changfeng Yao, Junxue Ren (2019). Effects of Ultrasonic Surface Rolling Parameters on Surface Integrity of TC17 Alloy. Journal of Materials Engineering and Performance.DOI
95. Fuqiang Yang, Dinghua Zhang, Hua Zhang, Kuidong Huang, You Wei Du, Mingxuan Teng (2019). Streaking artifacts suppression for cone-beam computed tomography with the residual learning in neural network. Neurocomputing.DOI
96. Fuqiang Yang, Dinghua Zhang, Hua Zhang, Kuidong Huang (2019). Scattering measurement and estimation in angular sequence for cone-beam CT based on projection structural tensor and modeling. Journal of X-Ray Science and Technology.DOI
97. Zhiyong Chang, Junjie Qian, Zezhong C. Chen, Neng Wan, Dinghua Zhang (2019). Geometrical theory of cutting stock with torus end mills in five-axis CNC machining and its applications in machining simulation. The International Journal of Advanced Manufacturing Technology.DOI
98. Qianrui Zhang, Ming Luo, Chenwei Shan, Dinghua Zhang (2019). Modelling of the Porousness inside 2.5D Carbon/Carbon Composites. Procedia CIRP.DOI
99. 王晶，罗明，吴宝海，张定华（2018）. 航空发动机机匣摆线粗加工轨迹规划方法. 《航空学报》.
100. Zhiyong Chang, Neng Wan, Zezhong C. Chen, Rong Mo, Dinghua Zhang (2018). Part localization theory and its application on near-net-shape machining. The International Journal of Advanced Manufacturing Technology.DOI
101. Jia Zheng, Dinghua Zhang, Kuidong Huang, Yuanxi Sun (2018). Cone-Beam Computed Tomography Image Pretreatment and Segmentation. International Symposium on Computational Intelligence and Design.DOI
102. Baohai Wu, Zezhong C. Chen, Ming Luo, Dinghua Zhang, Feiyan Han (2018). An automated approach to calculating the maximum diameters of multiple cutters and their paths for sectional milling of centrifugal impellers on a 4½-axis CNC machine. Chinese Journal of Aeronautics.DOI
103. Jia Zheng, Dinghua Zhang, Kuidong Huang, Yuanxi Sun (2018). Image segmentation framework based on optimal multi‐method fusion. IET Image Processing.DOI
104. Zheng Jia, Dinghua Zhang, Kuidong Huang, Yuanxi Sun (2018). A CBCT series slice image segmentation method. Journal of X-Ray Science and Technology.DOI
105. 韩飞燕，张定华，吴宝海，张莹（2017）. 基于变形映射的多轴粗加工工序模型建立方法. 《机械工程学报》.
106. Ya-Fei Yang, Dinghua Zhang, Kuidong Huang, Fuqiang Yang, Zongzhao Gao (2017). Three-dimensional weighting reconstruction algorithm for circular cone-beam CT under large scan angles. Nuclear Science and Techniques.DOI
107. Kuidong Huang, Wenlong Shi, Xinyu Wang, Yin Dong, Taoqi Chang, Hua Zhang, Dinghua Zhang (2017). Scatter measurement and correction method for cone-beam CT based on single grating scan. Optical Engineering.DOI
108. Zhiyong Chang, Jinan Wen, Zezhong C. Chen, Dinghua Zhang (2017). A Reliable and Efficient Approach to Numerically Controlled Programming Optimization for Multiple Largest Tools Cutting Blisks Patch by Patch in the Blisks' Four-Axis Rough Machining. Journal of Manufacturing Science and Engineering.DOI
109. Zhiyong Chang, Zezhong C. Chen, Rong Mo, Dinghua Zhang, Qi Deng (2017). An accurate and efficient approach to geometric modeling of undeformed chips in five-axis CNC milling. Computer-Aided Design.DOI
110. Fuqiang Yang, Dinghua Zhang, Kuidong Huang, Wenlong Shi, Zhang Caixin, Zongzhao Gao (2017). Projection matrix acquisition for cone-beam computed tomography iterative reconstruction. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
111. Junteng Wang, Dinghua Zhang, Baohai Wu, Ming Luo (2017). Numerical and Empirical Modelling of Machining-induced Residual Stresses in Ball end Milling of Inconel 718. Procedia CIRP.DOI
112. Jia Zheng, Dinghua Zhang, Kuidong Huang, Yuanxi Sun (2017). Adaptive image segmentation method based on the fuzzy c‐means with spatial information. IET Image Processing.DOI
113. Qi Yao, Ming Luo, Dinghua Zhang, Baohai Wu (2017). Identification of cutting force coefficients in machining process considering cutter vibration. Mechanical Systems and Signal Processing.DOI
114. Junteng Wang, Dinghua Zhang, Baohai Wu, Ming Luo (2017). Residual Stresses Analysis in Ball end Milling of Nickel-Based Superalloy Inconel 718. Materials Research.DOI
115. Ming Luo, Huan Luo, Dinghua Zhang, Kai Tang (2017). Improving tool life in multi-axis milling of Ni-based superalloy with ball-end cutter based on the active cutting edge shift strategy. Journal of Materials Processing Technology.DOI
116. 杨亚飞，张定华，黄魁东，时稳龙，张才鑫（2016）. 基于椭球包围盒的锥束CT三维加权重建算法. 《仪器仪表学报》.DOI
117. 周续，张定华，吴宝海，罗明（2016）. 材料切除对机匣铣削动力学与稳定性的影响. 《航空学报》.
118. 张定华，张仲玺，罗明，吴宝海（2016）. 面向航空复杂薄壁零件智能加工的进化建模方法. 《航空制造技术》.
119. 蒋睿嵩，汪文虎，王增强，张定华，卜昆（2016）. 航空发动机涡轮叶片精密成形技术及其发展趋势. 《航空制造技术》.
120. 周君，任景刚，廖铃吉，张定华（2016）. 航空发动机壳体2.5轴铣削加工刀具优选方法. 《航空制造技术》.
121. Junde Qi, Dinghua Zhang, Shan Li, Bing Chen (2016). Research on the adaptive adjustment of the parameters in grinding process. IEEE International Conference on Information and Automation (ICIA).DOI
122. Ming Luo, Yongfeng Hou, Dinghua Zhang (2016). Feedrate optimization for worn cutter with measured cutting force in rough milling. IEEE International Conference on Advanced Intelligent Mechatronics (AIM).DOI
123. Jia Zheng, Dinghua Zhang, Kuidong Huang, Yuanxi Sun, Shaojie Tang (2016). Adaptive windowed range-constrained Otsu method using local information. Journal of Electronic Imaging.DOI
124. Yongshou Liang, Dinghua Zhang, Junxue Ren, Zezhong C. Chen, Yingying Xu (2016). Accessible regions of tool orientations in multi-axis milling of blisks with a ball-end mill. The International Journal of Advanced Manufacturing Technology.DOI
125. Yaohua Hou, Ying Zhang, Dinghua Zhang (2016). Geometric Error Analysis of Compressor Blade Based on Reconstructing Leading and Trailing Edges Smoothly. Procedia CIRP.DOI
126. 韩飞燕，张定华，吴宝海，罗明，张晓东（2015）. 高缠绕叶轮流道4+1轴高效分段开槽方法. 《航空学报》.
127. 韩飞燕，张定华，张莹，吴宝海（2015）. 基于虚拟控制面约束的机匣类零件工序模型建立方法. 《航空学报》.
128. 史小强，吴宝海，张定华（2015）. 航空发动机叶片加工质量检测技术发展现状与趋势. 《航空制造技术》.
129. 张晓东，吴宝海，罗明，张定华（2015）. 航空发动机燃油控制系统复杂零件制造技术发展趋势. 《航空制造技术》.
130. 张莹，张定华，吴宝海（2015）. 焊接式整体叶盘加工余量自适应优化方法. 《航空制造技术》.
131. 张定华，黄新春（2015）. 航空发动机关键构件制造可靠性技术研究. 《航空制造技术》.
132. Kuidong Huang, Xiaofei Tian, Dinghua Zhang, Hua Zhang (2015). Performance evaluation and optimization of BM4D-AV denoising algorithm for cone-beam CT images. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
133. Ruisong Jiang, Wenhu Wang, Dinghua Zhang, Zengqiang Wang (2015). Wall thickness monitoring method for wax pattern of hollow turbine blade. The International Journal of Advanced Manufacturing Technology.DOI
134. Kuidong Huang, Wang Kun, Dinghua Zhang, Hua Zhang, Fuqiang Yang (2015). Rapid prejudgment of reconstructed object volume and its adaptive reconstruction for industrial cone-beam CT. IEEE International Conference on Electronic Measurement & Instruments.DOI
135. Ying Zhang, Dinghua Zhang, Baohai Wu (2015). An approach for machining allowance optimization of complex parts with integrated structure. Journal of Computational Design and Engineering.DOI
136. Dongqing Yan, Dinghua Zhang, Ming Luo (2015). Optimization of Barrel Cutter for Five-axis Flank-milling Based on Approximation of Tool Envelope Surface. Computer-Aided Design and Applications.DOI
137. Kaining Shi, Dinghua Zhang, Junxue Ren (2015). Optimization of process parameters for surface roughness and microhardness in dry milling of magnesium alloy using Taguchi with grey relational analysis. The International Journal of Advanced Manufacturing Technology.DOI
138. Junteng Wang, Dinghua Zhang, Baohai Wu, Ming Luo, Ying Zhang (2015). Kinematic analysis and feedrate optimization in six-axis NC abrasive belt grinding of blades. The International Journal of Advanced Manufacturing Technology.DOI
139. Yongshou Liang, Junxue Ren, Dinghua Zhang, Xiangyu Li, Jinhua Zhou (2015). Mechanics-based feedrate scheduling for multi-axis plunge milling. The International Journal of Advanced Manufacturing Technology.DOI
140. Yilong Liu, Baohai Wu, Ming Luo, Dinghua Zhang (2015). Modeling and Cutting Path Optimization of Shallow Shell Considering its Varying Dynamics During Machining. Procedia CIRP.DOI
141. 张定华，侯永锋，杨沫，吴宝海，刘智武（2014）. 智能加工工艺引领未来机床发展方向. 《航空制造技术》.
142. 杜随更，姜哲，张定华，巨江涛，李娜（2014）. GH4169DA磨削表面变质层软化机理. 《航空学报》.
143. 杨建华，张定华，吴宝海（2014）. 考虑加工过程的复杂薄壁件加工综合误差补偿方法. 《航空学报》.
144. Yongshou Liang, Dinghua Zhang, Junxue Ren, Yingying Xu (2014). Feedrate scheduling for multi-axis plunge milling of open blisks. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture.DOI
145. Shunli Zhang, Dinghua Zhang, Hao Gong, Omid Ghasemalizadeh, Ge Wang (2014). Fast and accurate computation of system matrix for area integral model-based algebraic reconstruction technique. Optical Engineering.DOI
146. Zhiyong Chang, Zezhong C. Chen, Zhao Jie, Dinghua Zhang (2014). A Generic Approach to Modeling Geometry of Un-Deformed Chip by Mathematical Representing Envelopes of Swept Cutter in Five-Axis CNC Milling.DOI
147. Ce Han, Dinghua Zhang, Baohai Wu, Kun Pu, Ming Luo (2014). Localization of freeform surface workpiece with particle swarm optimization algorithm.DOI
148. Yongfeng Hou, Dinghua Zhang, Ming Luo, Baohai Wu (2014). Tool flank wear recognition based on the variation of milling force vector in end milling. IEEE/ASME International Conference on Advanced Intelligent Mechatronics.DOI
149. Lei Zu, Sotiris Koussios, A. Beukers, Dinghua Zhang (2014). Development of Filament Wound Composite Isotensoidal Pressure Vessels. Polymers and Polymer Composites.DOI
150. 黄魁东，张定华，李明君，张华（2013）. DR/CT成像系统的曝光参数建模及快速优化方法. 《仪器仪表学报》.
151. 杨建华，张定华，张娟，吴宝海（2013）. 基于公差约束的复杂曲面宽行加工方法. 《机械工程学报》.
152. 胡述龙，张定华，张莹，吴宝海（2013）. 带公差约束的数字样板叶型检测方法. 《航空学报》.
153. 单晨伟，赵颖，刘维伟，张定华（2013）. 一种薄壁悬臂叶片数控加工非均匀余量刚度补偿方法. 《航空学报》.
154. 程云勇，朱真真，李维亮，张定华（2013）. 面向叶片弯扭变形分析的测量采样方法. 《计算机集成制造系统》.DOI
155. 王晶，张定华，罗明，吴宝海（2013）. 复杂曲面零件五轴加工刀轴整体优化方法. 《航空学报》.
156. Yongshou Liang, Dinghua Zhang, Zezhong C. Chen, Junxue Ren, Xiangyu Li (2013). Tool orientation optimization and location determination for four-axis plunge milling of open blisks. The International Journal of Advanced Manufacturing Technology.DOI
157. Jun Ma, Dinghua Zhang, Baohai Wu, Ming Luo (2013). Toolpath generation for four-axis electrical discharge rough milling of blisk. IEEE International Symposium on Assembly and Manufacturing.DOI
158. Ying Zhang, Dinghua Zhang, Baohai Wu, Jianhua Yang (2013). A unified geometric modeling method of process surface for precision machining of thin-walled parts. IEEE International Symposium on Assembly and Manufacturing.DOI
159. Chenwei Shan, Wei-Wei Liu, Xiaojun Lin, Dinghua Zhang (2013). Three half-axis tool orientation optimization for spiral machining of blades. The International Journal of Advanced Manufacturing Technology.DOI
160. Baohai Wu, Dinghua Zhang, Ming Luo, Ying Zhang (2013). Collision and interference correction for impeller machining with non-orthogonal four-axis machine tool. The International Journal of Advanced Manufacturing Technology.DOI
161. Baohai Wu, Ming Luo, Dinghua Zhang (2013). An Efficient Approach for Identifying Stable Lobes with Discretization Method. Advances in Mechanical Engineering.DOI
162. 查方龙，张定华，黄魁东，张亮，李明君（2012）. 基于预分割轮廓的CT图像亚体素表面检测方法. 《仪器仪表学报》.
163. 吴宝海，张娟，杨建华，张定华（2012）. 螺杆压缩机转子成形砂轮刃形计算. 《机械工程学报》.
164. 李继博，张定华，吴宝海，刘维伟（2012）. 薄壁叶片精密加工装夹方案设计与优化. 《中国机械工程》.
165. 王晶，张定华，吴宝海，罗明（2012）. 基于临界约束的四轴数控加工刀轴优化方法. 《机械工程学报》.
166. 黄新春，张定华，杨振朝，任敬心，姚倡锋（2012）. GH4169磨削表面粗糙度影响参数的敏感性研究. 《航空制造技术》.
167. 王佩，张定华，陈冰，李山，王明微（2012）. 基于动态Bayesian网络的叶片加工质量监控与溯源. 《航空学报》.
168. 李明君，张定华，黄魁东，张顺利，查方龙（2011）. 基于最小三维凸包的锥束CT快速重建方法. 《西北工业大学学报》.
169. 徐岳琳，卜昆，张定华，黄胜利，程云勇，索瑞（2011）. 内切圆弦长法计算空心涡轮叶片蜡模壁厚. 《航空学报》.
170. 于清超，黄魁东，张定华，李明君（2011）. 一种锥束CT散射场检测优化方法. 《仪器仪表学报》.
171. 张定华，董一巍，卜昆，窦杨青（2011）. 基于中弧线的叶片蜡模模具型面优化方法. 《计算机集成制造系统》.
172. Ting Yang, Dinghua Zhang, Bing Chen, Shan Li (2011). Non-cooperative game decision for capacity evaluation under output demand uncertainty.DOI
173. Yiwei Dong, Dinghua Zhang, Kun Bu, Yangqing Dou, Wenhu Wang (2011). Geometric parameter-based optimization of the die profile for the investment casting of aerofoil-shaped turbine blades. The International Journal of Advanced Manufacturing Technology.DOI
174. Lei Zu, Dinghua Zhang, Yingqiang Xu, Dongjuan Xiao (2011). Integral design and simulation of composite toroidal hydrogen storage tanks. International Journal of Hydrogen Energy.DOI
175. 李明君，张定华，黄魁东，张顺利，于清超（2010）. 锥束计算机断层成像系统快速定位方法. 《兵工学报》.
176. 张顺利，张定华，李明君，吉军（2010）. 基于SIMD技术的锥束ART算法快速并行图像重建. 《仪器仪表学报》.DOI
177. 敬石开，程云勇，张定华，杨海成（2010）. 一种区域公差约束的叶片模型配准方法. 《计算机集成制造系统》.DOI
178. 董一巍，卜昆，窦杨青，张定华（2010）. 精铸涡轮叶片虚拟修模系统的开发. 《2010年“航空航天先进制造技术”学术交流会》.
179. 南长峰，吴宝海，张定华（2010）. 复杂通道类零件五坐标加工全局干涉处理方法. 《航空学报》.
180. 田荣鑫，姚倡锋，黄新春，任军学，张定华（2010）. 面向加工表面粗糙度的钛合金高速铣削工艺参数区间敏感性及优选. 《航空学报》.
181. 张定华，罗明，吴宝海，唐明，齐国宁（2010）. 智能加工技术的发展与应用. 《航空制造技术》.
182. 吴宝海，严亚南，罗明，张定华（2010）. 车铣复合加工的关键技术与应用前景. 《航空制造技术》.
183. Xue Yan, Hua Tao, Dinghua Zhang, Baohai Wu (2010). Chip Thickness Analysis Based on Tooth Trajectory for Different End Milling Processes.DOI
184. Xu Zhou, Dinghua Zhang, Baohai Wu, Jianhua Yang, Ming Luo (2010). Spiral Tool Path Planning for Five-Axis Machining of Multi-patch Island Based on Point Model.DOI
185. Ting Yang, Dinghua Zhang, Bing Chen, Shan Li (2010). Research on Service Capacity of Production Line Based on Complex Weighted Network. International Conference on Management and Service Science (MASS).DOI
186. Ting Yang, Dinghua Zhang, Bing Chen, Shan Li (2010). Analysis of Mixed Production Line Based on Complex Weighted Network. International Conference on Intelligent Computation Technology and Automation.DOI
187. Zhang Dinghua (2010). A decoupling method for displacement field deformation characteristics of turbine blades. Machinery Design and Manufacture.
188. 张定华，程云勇，卜昆，张顺利（2009）. 考虑弯扭变形的叶片模型配准方法. 《航空学报》.
189. 张莹，吴宝海，李山，张定华，陈志强（2009）. 多曲面岛屿五轴螺旋刀位轨迹规划. 《航空学报》.
190. 卜昆，董一巍，姚倡锋，张定华（2009）. 精铸过程位移场的数值模拟方法. 《航空学报》.
191. 王苦愚，张定华，黄魁东，李明君（2009）. 一种锥束CT中平板探测器输出图像校正方法. 《计算机辅助设计与图形学学报》.
192. 杨振朝，张定华，姚倡锋，任军学，杜随更（2009）. TC4钛合金高速铣削参数对表面完整性影响研究. 《西北工业大学学报》.
193. 张顺利，张定华，赵歆波，黄魁东（2009）. 基于最小区域的快速CT图像重建. 《计算机辅助设计与图形学学报》.
194. 董一巍，卜昆，窦杨青，张定华（2009）. 基于ProCAST仿真文件的精铸模具反变形方法. 《航空制造技术》.
195. 冯涛，张定华，陈冰，李山（2009）. 数据模型驱动的复杂产品虚拟制造. 《航空制造技术》.
196. 蒋睿嵩，张定华，汪文虎，史华杰（2009）. 基于知识的涡轮叶片精铸模具智能设计系统框架. 《航空制造技术》.
197. 史华杰，张定华，汪文虎，卜昆，蒋睿嵩（2009）. 涡轮叶片精铸模具知识模板构建及应用. 《航空制造技术》.
198. 姚倡锋，张定华，卜昆，王增强（2009）. 复杂零件协同制造任务信息模型及建模方法. 《计算机集成制造系统》.
199. 杨振朝，张定华，姚倡锋，任军学，田卫军（2009）. TC11钛合金插铣加工铣削力影响参数的灵敏度分析. 《航空学报》.
200. 张顺利，张定华，黄魁东，程云勇（2009）. 锥束ART算法快速图像重建. 《仪器仪表学报》.DOI
201. 李山，罗明，吴宝海，张定华（2009）. 一种利用点搜索的多曲面体清根轨迹生成方法. 《西北工业大学学报》.
202. Kuidong Huang, Dinghua Zhang, Kai Wang (2009). Non-local means denoising algorithm accelerated by GPU. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
203. Mingjun Li, Dinghua Zhang, Kuidong Huang, Qingchao Yu, Shunli Zhang (2009). Multi-core parallel reconstruction method for cone-beam computed tomography. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
204. Kuidong Huang, Dinghua Zhang, Mingjun Li (2009). Noise Suppression Methods in Beam Hardening Correction for X-Ray Computed Tomography. International Congress on Image and Signal Processing (CISP).DOI
205. Kuidong Huang, Dinghua Zhang, Kuyu Wang, Mingjun Li (2009). Adaptive Non-local Means Denoising Algorithm for Cone-Beam Computed Tomography Projection Images. International Conference on Image and Graphics.DOI
206. Kuidong Huang, Dinghua Zhang, Mingjun Li, Kuyu Wang (2009). Detection model modeling and application for batch scans of cone-beam computed tomography. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
207. Tao Feng, Bing Chen, Dinghua Zhang, Shan Li (2009). Products Development Process Based on DSM and Its Optimization. International Conference on Measuring Technology and Mechatronics Automation (ICMTMA).DOI
208. Cheng Yunyong, Zhang Dinghua, Huang Sheng-li, Kun Bu (2009). Research on a weighting alignment method for investment casting turbine blade shape inspection. International Technology and Innovation Conference (ITIC).DOI
209. Wang Youjun, Zhang Dinghua, WU Fu-jia, Yao Kai, Hou Zhongming (2009). Simulation of Cutting Force Based on Software Deform. International Conference on Intelligent Computation Technology and Automation.DOI
210. 单晨伟，张定华，刘维伟（2008）. 组合曲面叶片的螺旋加工刀位轨迹生成. 《计算机集成制造系统》.DOI
211. 胡栋材，赵歆波，张定华，李明君，孔永茂（2008）. 自适应遗传算法配准三维数字样品模型及其CAD模型. 《CT理论与应用研究》.
212. 黄魁东，张定华，孔永茂，王凯（2008）. 基于切片轮廓重投影的锥束CT射束硬化校正方法. 《仪器仪表学报》.DOI
213. 马建宁，张定华，王增强，李山，吴宝海（2008）. 大型飞机用发动机的特点及关键制造技术. 《航空制造技术》.
214. 张定华，张莹，吴宝海，李山，张莎莎（2008）. 自适应加工技术在整体叶盘制造中的应用. 《航空制造技术》.
215. 姚倡锋，张定华，卜昆，汪文虎，任军学（2008）. 基于物理制造单元的网络化制造资源建模及信息集成. 《计算机集成制造系统》.
216. 姚倡锋，张定华，卜昆，汪文虎，任军学（2008）. 异地协同制造资源优化配置过程模型及实现. 《计算机集成制造系统》.DOI
217. Kuidong Huang, Dinghua Zhang, Yanfang Jin (2008). Topological region defect segmentation algorithm for cone-beam computed tomography slice images. Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE.DOI
218. Ting Yang, Dinghua Zhang, Bing Chen, Shan Li (2008). Research on Plant Layout and Production Line Running Simulation in Digital Factory Environment.DOI
219. Jibo Li, Dinghua Zhang, Shan Li (2008). Engineering Change Management Based on Weighted Complex Networks.DOI
220. Yiwei Dong, Kun Bu, Dinghua Zhang (2008). Numerical simulation of displacement field of solidification process for investment casting.DOI
221. Jun Ji, Dinghua Zhang, Shan Li, Baohai Wu, Bing Chen (2008). Complex Product Collaborative Design and Simulation Based on Product Master Model Technology. International Conference on Intelligent Computation Technology and Automation.DOI
222. Chenwei Shan, Dinghua Zhang, Weiwei Liu, Junxue Ren, Xiaojun Lin (2008). A novel spiral machining approach for blades modeled with four patches. The International Journal of Advanced Manufacturing Technology.DOI
223. Ming Luo, Baohai Wu, Dinghua Zhang, Shan Li, Ying Zhang (2008). Toolpath Generation for Four-Axis Rough Milling of Sculptured Surface Turbine Blade. Lecture notes in computer science.DOI
224. Zhang Dinghua (2008). PLM-oriented domain-specific modeling method.
225. 赵歆波，邹晓春，张定华，张顺利（2007）. 一种基于梯度下降的图像配准算法. 《西北工业大学学报》.
226. 刘元朋，张定华，张力宁，敖波（2007）. 基于UGⅡ的曲线光顺方法. 《航空制造技术》.
227. 王凯，张定华，刘晶，张顺利，赵歆波（2007）. 采用3D Gaussian Facet模型的亚体素表面检测. 《计算机辅助设计与图形学学报》.
228. 黄魁东，张定华，毛海鹏，刘远（2007）. 理想材料零件的锥束CT投影仿真. 《计算机辅助设计与图形学学报》.
229. 卜昆，赵杰，王继锋，张丹，张定华（2006）. 虚拟修模技术在涡轮叶片模具优化设计中的应用研究. 《西北工业大学学报》.
230. 刘晶，张定华，张东平，王凯（2006）. 产品模型定位系统核心技术研究. 《中国机械工程》.
231. 赵杰，张定华，卜昆（2006）. 基于自组织网格的涡轮叶片NURBS曲面重构. 《制造业自动化》.
232. 杨旭东，张丰收，张定华（2006）. 基于PMAC的锥束体积CT工作台控制系统设计. 《制造业自动化》.
233. 姚倡锋，张定华，彭文利，李山（2006）. 面向复杂零件网络化制造的资源优化配置方法. 《计算机集成制造系统》.DOI
234. Kai Wang, Dinghua Zhang, Xinbo Zhao, Kuidong Huang, Yunyong Cheng (2006). Surface detection with subvoxel accuracy using facet model and IDDG operator. International Conference on Computer-Aided Industrial Design and Conceptual Design (CAIDCD).DOI
235. Zhao Jie, Kun Pu, Zhang Dinghua (2006). The Nurbs Surface Reconstruction for the Turbine Blade Scatted Points Based on FEM. Manufacture Information Engineering of China.
236. Zhang Dinghua (2006). Design of control system for table of cone beam volume computed tomography based on PMAC. Manufacturing Automation.
237. 彭文利，张定华，姚倡锋，党新安（2005）. 面向制造资源优化配置的制造过程协同管理研究. 《制造业自动化》.
238. 程云勇，张定华，王凯，刘晶，赵歆波（2005）. 基于CBVCT图像序列的空心涡轮叶片壁厚检测技术. 《航空制造技术》.
239. 姚倡锋，张定华，彭文利，任军学（2005）. 基于Web Service的网络化制造应用系统集成. 《航空制造技术》.
240. 张定华，Ruola Ning，卜昆，毛海鹏（2005）. 体积CT系统中的平板探测器校正方法. 《仪器仪表学报》.DOI
241. 刘元朋，张定华，张力宁（2005）. 逆向工程中圆柱体提取方法的研究. 《计算机辅助设计与图形学学报》.
242. 任军学，张定华，王增强，刘维伟，汪文虎（2004）. 整体叶盘数控加工技术研究. 《航空学报》.
243. 侯增选，F.-L.Krause，张定华，张树生，王增强（2004）. 一种新的压缩体素模型及其应用. 《西北工业大学学报》.
244. 刘元朋，张定华，桂元坤，李永奇（2004）. 用带约束的最小二乘法拟合平面圆曲线. 《计算机辅助设计与图形学学报》.
245. 刘晶，张定华，毛海鹏（2004）. CT切片重构的STL模型与CAD模型之间的误差彩色云图显示. 《组合机床与自动化加工技术》.
246. 任军学，胡创国，张定华，徐夏刚（2004）. 航空发动机材料切削参数优化模型. 《航空制造技术》.
247. 彭文利，张定华，姚倡锋，胡创国（2004）. 基于网络的可重构制造资源优化配置平台. 《航空制造技术》.
248. 姚倡锋，张定华，彭文利（2004）. 基于遗传算法的网络化制造单元选择问题研究. 《计算机集成制造系统》.
249. 刘晶，张定华，毛海鹏，赵歆波（2004）. 基于SVD-ICP算法配准CT切片重构模型与CAD模型. 《计算机工程与应用》.
250. 汪文虎，王增强，任军学，张定华（2003）. 导向器类零件精铸模具CAD/CAM系统开发应用. 《航空制造技术》.
251. 刘晶，张定华，毛海鹏，曹华（2003）. 空心涡轮叶片CAD模型与CT切片模型的配准研究. 《计算机工程与应用》.
252. 姚倡锋，彭文利，张定华，刘红军（2003）. 基于Internet的制造单元建模研究. 《制造业自动化》.
253. Hongming Cai, Weiping He, Dinghua Zhang (2003). A semantic style driving method for products’ appearance design. Journal of Materials Processing Technology.DOI
254. 邱泽阳，肖双九，宋晓宇，杨海成，张树生，张定华（2002）. 基于三角Bézier曲面局部逼近的3D点插补算法. 《西北工业大学学报》.
255. 邱泽阳，肖双九，杨海成，张树生，张定华（2001）. 一种基于逼近理论的曲面重构方法. 《计算机辅助设计与图形学学报》.
256. 张萍，莫蓉，王增强，张定华（2000）. 基于规则的发动机叶片模具自动分模设计. 《西北工业大学学报》.
257. 张定华，赵歆波（2000）. 基于数字样品虚拟测量的反求工程CAD建模技术. 《西部大开发 科教先行与可持续发展——中国科协2000年学术年会文集》.
258. Zhang Dinghua (2000). Process Modeling of Concurrent Engineering Based on IDEF3. Mechanical Science and Technology.
259. 王广，张树生，王健，张定华（1999）. 基于ICT图象的实体建模研究. 《制造业自动化》.
260. 吴勇，周西军，张定华，杨海成（1999）. 基于特征的三维零件工程图表示. 《西北工业大学学报》.
261. 谢红，张定华，张树生（1998）. 基于 ICT 的 CAD 建模技术中切片采样问题的探讨. 《机械科学与技术》.
262. 沈自林，莫蓉，张定华（1997）. 基于 AUTOCAD 的面向机械装配图的关键技术及其应用. 《机械科学与技术》.
263. 姬连俊，莫蓉，张定华（1997）. 基于 AUTOCAD 带约束的图形参数化建库工具研究. 《机械科学与技术》.
264. 谢红，张树生，张定华，杨彭基（1997）. 一种基于 ICT 的工件模型三维重建方法. 《航空学报》.
265. 谢红，张定华，张树生，杨彭基（1997）. 基于 ICT 和 RP&M 的计算机辅助产品快速仿制系统研究. 《西北工业大学学报》.
266. 禹涌，张铁昌，张定华（1997）. 回转类零件表面特征多轴数控加工编程技术研究. 《西北工业大学学报》.
267. 莫蓉，沈自林，张定华（1997）. 通用多边形的线裁剪及其在二维零件装配图消隐中的应用. 《西北工业大学学报》.
268. 刘晓婷，莫蓉，张定华（1997）. 基于AutoCAD的工程图功能扩充. 《智能制造》.
269. 谢红，张定华，张树生（1996）. ICT和RP＆M在CAD／CAM中的应用. 《制造业自动化》.
270. 张定华，魏生民，杨海成（1993）. 一个缺省用户接口原型自动生成系统. 《西北工业大学学报》.
271. 张定华，杨彭基，杨海成（1993）. 雕塑曲面多轴加工的干涉处理. 《西北工业大学学报》.
272. 张定华（1987）. 图象编程数据结构的指点查询接口. 《西北工业大学学报》.
273. 张定华（1987）. 多轴刀具轨迹的偏置计算方法. 《航空学报》.

预印本

1. Jia Ge, Ming Luo, G. Catalanotti, Brian George Falzon, Colm Higgins, Caroline McClory, Jean-Aubin Thiebot, Li Zhang, Miaomiao He, Dinghua Zhang, Yan Jin, Dan Sun (2023). Process characteristics, damage mechanisms and challenges in machining of fibre reinforced thermoplastic polymer (FRTP) composites: A review. ChemRxiv.DOI

书籍章节

1. Dinghua Zhang, Ming Luo, Baohai Wu, Ying Zhang (2021). Polymorphic Evolution Process Model for Time-Varying Machining Process. Research on intelligent manufacturing.DOI
2. Dinghua Zhang, Ming Luo, Baohai Wu, Ying Zhang (2021). Clamping Perception for Residual Stress-Induced Deformation of Thin-Walled Parts. Research on intelligent manufacturing.DOI
3. Dinghua Zhang, Ming Luo, Baohai Wu, Ying Zhang (2021). Learning and Optimization of Process Model. Research on intelligent manufacturing.DOI
4. Dinghua Zhang, Ming Luo, Baohai Wu, Ying Zhang (2021). Machining Process Monitoring and the Data Processing Method. Research on intelligent manufacturing.DOI
5. Dinghua Zhang, Ming Luo, Baohai Wu, Ying Zhang (2021). Dynamic Response Prediction and Control for Machining Process. Research on intelligent manufacturing.DOI
6. Dinghua Zhang, Ming Luo, Baohai Wu, Ying Zhang (2021). Introduction. Research on intelligent manufacturing.DOI
7. Dinghua Zhang, Yunyong Cheng, Ruisong Jiang, Neng Wan (2017). Cavity Design Method for Investment Casting Die of Turbine Blade. Springer eBooks.DOI
8. Dinghua Zhang, Yunyong Cheng, Ruisong Jiang, Neng Wan (2017). Deformation Simulation of Investment Casting and Die Cavity Optimization of Turbine Blade. Springer eBooks.DOI
9. Dinghua Zhang, Yunyong Cheng, Ruisong Jiang, Neng Wan (2017). Design of the Die Base for the Investment Casting Turbine Blade. Springer eBooks.DOI
10. Dinghua Zhang, Yunyong Cheng, Ruisong Jiang, Neng Wan (2017). Introduction. Springer eBooks.DOI
11. Dinghua Zhang, Yunyong Cheng, Ruisong Jiang, Neng Wan (2017). Turbine Blade Investment Casting Experiment and Measurement Evaluation. Springer eBooks.DOI
12. Dinghua Zhang, Wenhu Wang, Kun Bu, Yunyong Cheng (2017). Digitized Modeling Technology of Turbine Blade. Springer eBooks.DOI
13. Dinghua Zhang, Yunyong Cheng, Ruisong Jiang, Neng Wan (2017). The Manufacturing and Finalization of the Turbine Blade Investment Casting Die. Springer eBooks.DOI
14. Ming Luo, Dinghua Zhang, Baohai Wu, Shan Li (2008). Clean-up Tool-path Generation for Multi-patch Solid Model by Searching Approach. Springer eBooks.DOI
15. Xiaolong Liu, Xitian Tian, Zhenming Zhang, Dinghua Zhang (2008). Process Routing Planning System Based on PDM. Springer eBooks.DOI
16. Baohai Wu, Shan Li, Dinghua Zhang (2008). Automatic Adaptive Triangulation of Surfaces in Parametric Space. Springer eBooks.DOI

书籍

1. Dinghua Zhang, Ming Luo, Baohai Wu, Ying Zhang (2021). Intelligent Machining of Complex Aviation Components. Research on intelligent manufacturing.DOI
2. Dinghua Zhang, Yunyong Cheng, Ruisong Jiang, Neng Wan (2017). Turbine Blade Investment Casting Die Technology. Springer eBooks.DOI