王文权｜吉林大学｜学者主页

2026

镁合金表面超音速等离子喷涂Al-Al2O3/5YSZ涂层的组织与耐磨性能研究

任东亭，李健，王文权，张东，邵晓宙，尹厚，郝晓华，温毅，康文凯

《热加工工艺》

2026

The tribological mechanism and corrosion behavior of NiTi coating on 316L stainless steel substrate prepared by cold metal transfer arc

Xudong Liang, Xueyuan Zhao, Xinge Zhang, Wenquan Wang, Xiaohui Zhao, Tianyi Li, Zhihui Zhang

Materials Chemistry and Physics

DOI

2026

Microstructural and mechanical gradient mappings across ND–TD planes of ultra-thick 6061-T651 FSW joints

Hongyong Xu, Suyu Wang, Yuxin Xu, Wenquan Wang, Xinge Zhang

Journal of Materials Research and Technology

DOI

2026

CMT-based wire-arc directed energy deposition functional bimetallic components of NiTi alloy and 316L stainless steel with a Cu interlayer: Revealing the influence of manufacturing sequences on microstructure and mechanical properties

Xudong Liang, Xinge Diana Zhang, Wenquan Wang, Jingwei Liang, Xiaohui Zhao, Ke Wu, Haiyang Li, Zhihui Zhang

Journal of Manufacturing Processes

DOI

2026

Achieving superior mechanical properties in ultra-thick Al alloy friction stir welded joints

Hongyong Xu, Suyu Wang, Yuxin Xu, Wenquan Wang, Xinge Zhang

Materials Letters

DOI

2026

Investigation into the regulation of particle size and morphology of Nb521 alloy powders produced by ultra-high-speed plasma rotating electrode process

Zhongyi Luo, Wenquan Wang, Xinwei Bo, Binglang Ren, Xiaoyu Wang, Xinge Zhang

Powder Metallurgy

DOI

2026

Effects of Flat Energy Director Thickness and Welding Time on Interface Formation for Ultrasonic Welding of GF / PPS Composites

Zhuobin Sun, Xinge Zhang, Wenquan Wang, Hongen Wang, Yang Yang, Xueshan Zhao, Gang Deng, Zhihui Zhang

Journal of Applied Polymer Science

DOI

2026

Eliminating microstructural heterogeneity and overcoming the strength-ductility trade-off: Microstructural evolution and strengthening-toughening mechanisms of AFSD-processed AA7475 via hierarchical solid solution

Haohan Zhang, Wenquan Wang, Xinge Zhang, Xiaosong Feng, Wenxiao Li

Materials Science and Engineering A

DOI

2026

Elevated-temperature tensile behavior of additive friction stir deposition-processed Ti-6Al-4V: Gradient microstructure and deformation mechanisms

Haohan Zhang, Wenxiao Li, Wenquan Wang, Xinge Zhang, Xiaosong Feng, Bo Sun, Meihua Fan, Linchao Xu

Materials Science and Engineering A

DOI

2026

Synergistic enhancement of mechanical interlocking and chemical bonding in Al alloy/CFRTP joints prepared by friction stir lap welding: Effect of laser surface texturing

Lianhong Ge, Wenquan Wang, Zhuobin Sun, Kunpeng Wang, Jiaxuan Wu, Xiaosong Feng, Xueshan Zhao, Xinge Zhang

Journal of Materials Processing Technology

DOI

2026

Microstructure and mechanical properties of laser-welded titanium alloy/aluminum alloy joint with CoNiCu 1.25 Nb 0.5 V 1.25 HEA filler powder

Jiaxu Shao, Wenquan Wang, Wenquan Wang, Xiaoyan Gu, Lihui Zhang, Weihan Wang, Weihan Wang

Advances in Materials and Processing Technologies

DOI

2026

Study on vacuum gas nitriding process and surface properties of AISI 430 stainless steel

Jialong Zuo, Wenquan Wang, Xinge Diana Zhang

Surface Science and Technology

DOI

2025

工艺参数对22MnB5钢MAG焊接头成形及性能影响研究

韩团结，王铎，张新戈，夏昌兴，赵振洲，阮守新，路洪洲，冯毅，王文权

《电焊机》

2025

复合细化变质处理ADC12铝合金的微观组织与力学性能

郑道友，杨依帆，程煜刚，赵葵，王坤，王文权

《吉林大学学报(工学版)》

DOI

2025

冷却速率对ADC12合金凝固组织与性能的影响

程煜刚，李俊琛，郑道友，赵葵，钱琦嘉，王文权，王坤

《特种铸造及有色合金》

2025

Synergistic effect of interfacial silane film and laser texturing on joining characteristics of pretreated Al/CFRTP friction stir welded joints

Suyu Wang, Wenquan Wang, Yuhua Chen, Xinge Zhang, Shanlin Wang, Timing Zhang, Yuxin Xu

Materials & Design

DOI

2025

Microstructure and mechanical properties of AA6061/22MnB5 steel lap joints fabricated by friction element welding

Haohan Zhang, Haohan Zhang, Yandi Zhang, Yandi Zhang, Yandi Zhang, Ziqi He, Linchao Xu, Zerun Yu, Xinge Zhang, Wenquan Wang

Materials Today Communications

DOI

2025

Droplet control and grain refinement in magnetic-assisted CMT additive manufacturing of 2319 aluminum alloy

Xinge Diana Zhang, Wenquan Wang, Jianyang Zheng, Jingwei Liang, Xiaosong Feng, Hao Yi, Zhihui Zhang

Journal of Materials Research and Technology

DOI

2025

Microstructure and mechanical properties of NiTi/316L stainless steel dissimilar joint prepared by cold metal transfer welding

Xudong Liang, Xinge Diana Zhang, Wenquan Wang, Jingwei Liang, Xiaohui Zhao, Xueyuan Zhao, Ke Wu, Zhihui Zhang

Materials Letters

DOI

2025

Microstructure and mechanical properties of magnesium alloy to galvanized steel dissimilar lap joints fabricated by CMT weld-brazing process

Dandan Zhang, Xinge Diana Zhang, Wenquan Wang, Hongzhou Lu, Lei Cui, Jianhua Li

Journal of Materials Research and Technology

DOI

2025

Enhanced strength-ductility synergy of Mg-Nd-Zn-Zr alloys fabricated by wire-arc directed energy deposition and subsequent heat treatment

Ke Wu, Xinge Diana Zhang, Wenquan Wang, Faming Shen, Xin Zheng, Xuanyu Wei, Jingwei Liang, Xudong Liang, Derui Zhu, Zhi‐Hui Zhang

Journal of Alloys and Compounds

DOI

2025

Improving recrystallization of ultrasonic welded joint of SiCp/Al composites via pulsed current

Zhuobin Sun, Mengwei Shen, Zeyang Li, Yang Xiao, Jingwei Liang, Wenquan Wang, Zhimin Liang, Xinge Zhang, Yongmei Liang

Materials Characterization

DOI

2025

Exceptional strength and ductility in 18Ni300/316 L heterogeneous bionic structures through laser additive manufacturing

Xinge Zhang, Minglv Mao, Wenquan Wang, Jingwei Liang, Xudong Liang, Zhihui Zhang, Zhimin Liang

Materials Characterization

DOI

2025

Evolution of macro/mesoscopic thermal-mechanical fields in friction lap joining of surface-textured Al alloy to CFRTP

Suyu Wang, Yuxin Xu, Wenquan Wang, Xinge Zhang, Yuhua Chen, Peihao Geng, Ninshu Ma

Journal of Manufacturing Processes

DOI

2024

热处理工艺对锻造430F铁素体不锈钢组织和性能的影响

徐临超，叶赛男，王文权，张新戈，陆有，郭威

《特殊钢》

2024

表面喷丸及退火处理对Fe-30Mn-3Al-3Si TWIP钢组织与性能的影响

王坤，王邦林，廖兴利，卢承宏，蔡承宇，林继兴，童先，王文权

《材料保护》

2024

Corrosion Behavior of Pre-oxidized GH4169 Alloy with Solid NaCl Deposited in a Wet Oxygen Flow at 600 °C

Weidong Zhang, Yu Cui, Li Liu, Wenquan Wang, Wenzheng Chen, Rui Li, Fu-Hui Wang

Acta Metallurgica Sinica

DOI

2024

A new sight on the fracture behavior of GH4169 produced by NaCl-induced corrosion in a humid environment of 600 °C

Wenquan Wang, Yu Cui, Luchao Sun, Rui Liu, Fu-Hui Wang, Peiling Ke, Li Liu

Corrosion Science

DOI

2024

The effect of NaCl-induced corrosion on Ti60′s hot salt stress corrosion cracking

Wenzheng Chen, Wenquan Wang, Li Liu, Rui Liu, Yu Cui, Zhiyong Chen, Qing-Jiang Wang, Fu-Hui Wang

Corrosion Science

DOI

2024

Preparation and characterization of supersonic plasma sprayed Al–Al2O3–Cr2O3 composite coatings on magnesium alloy substrate

Wenquan Wang, Dongting Ren, Xinge Zhang, Wenbo Du, Sheng Li Zhu, Hongmei Li

Ceramics International

DOI

2024

Microstructure and mechanical properties of Mg-Nd-Zn-Zr alloy fabricated by TIG-based wire – Arc directed energy deposition with pulsed current

Ke Wu, Xinge Diana Zhang, Wenquan Wang, Jingwei Liang, Xin Zheng, Faming Shen, Xudong Liang, Zhihui Zhang

Thin-Walled Structures

DOI

2023

ZM6铸造镁合金氩弧焊补焊特性与接头组织及性能

张新戈，王文权，郑欣，陈健，申发明，李洪梅，孙大千

《电焊机》

2023

Nitrogen-induced optimization of corrosion resistance for nanocrystalline soft magnetic Fe-Zr-B alloys

Haoran Ma, Wenquan Wang, Yan-Xin Liu, Xiahe Liu, Aina He, Ya-Qiang Dong, Yong Wang, Jiawei Li

Journal of Materials Science & Technology

DOI

2023

Exploration on the Stress-induced Internal Corrosion of NaCl-Deposited GH4169 Under Humid Intermediate Temperature Environments

Wenquan Wang, Yu Cui, R. Liu, Li Liu, Fu-Hui Wang

Corrosion Science

DOI

2023

Microstructure and Mechanical Properties of Friction Stir Lap Welding Joint of Al/CU Dissimilar Metals

Fan Zhi Jiang, Wenquan Wang, Xinge Zhang, Wenbiao Gong

Metals

DOI

2023

Weld formation, microstructure and mechanical properties of magnesium alloy and Al-Si-coated steel dissimilar lap joints fabricated by the CMT weld-brazing process

Dandan Zhang, Xinge Zhang, Wenquan Wang, Jianyang Zheng, Juntong Chu, Lei Cui, YingtaoTian

Materials Characterization

DOI

2023

Enhancing bonding synergy and mechanical response of metal/composite hybrid joints through physicochemical surface pretreatment

Suyu Wang, Wenquan Wang, Wenquan Wang, Yuxin Xu, Yingtao Tian, Xinge Zhang, Hu Huang

Journal of Materials Processing Technology

DOI

2023

Microstructure and mechanical properties of ZrC modified Ni60 hard-facing alloy fabricated by laser metal deposition

Ming Rui Du, Wenquan Wang, Xinge Zhang, Liang Liu, Hongmei Li

Journal of Materials Research and Technology

DOI

2022

轨道客车铝车体用6005A-T6铝合金MIG焊接头的微观组织和力学性能

乔建毅，赵天光，王文权，文享龙，乔健

《材料热处理学报》

2022

Design and Fabrication of Aluminum Honeycomb Sandwich Structures by Atmosphere Protect Brazing: Microstructural Evolution and Mechanical Behavior

Suyu Wang, Yuxin Xu, Xinge Diana Zhang, Yingchao Bi, Wenquan Wang

Materialia

DOI

2021

H13钢表面电火花沉积WC-Ni基金属陶瓷涂层微观组织及摩擦磨损性能

王文权，杜明，张新戈，耿铭章

《金属学报》

2021

选区激光熔化成形TiN/Inconel 718复合材料的组织和力学性能

王文权，王苏煜，陈飞，张新戈，徐宇欣

《金属学报》

2021

Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process

Wenquan Wang, Ming Rui Du, Xinge Zhang, Chengqun Luan, Yingtao Tian

Materials

DOI

2021

Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro-textures

Wenquan Wang, Suyu Wang, Xinge Zhang, Yuxin Xu, Yingtao Tian, Hu Huang

Materials Letters

DOI

2021

Microstructures and mechanical properties of Nb nanoparticles modified Ni60 hard-facing alloy fabricated by laser metal deposition

Liang Liu, Wenquan Wang, Xinge Zhang, Xin Li, Yingtao Tian, Xiaohui Zhao

Materials Science and Engineering A

DOI

2021

Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties

Wenquan Wang, Suyu Wang, Xinge Zhang, Fei Chen, Yuxin Xu, Yingtao Tian

Journal of Manufacturing Processes

DOI

2021

Influence of Assembly Gap Size on the Structure and Properties of SUS301L Stainless Steel Laser Welded Lap Joint

Hongxiao Wang, Yanxin Wang, Xin Li, Wenquan Wang, Xiwei Yang

Materials

DOI

2020

电火花沉积Ni/Ti(C,N)金属陶瓷复合涂层的组织及性能研究

耿铭章，王文权，张新戈

《表面技术》

DOI

2020

不锈钢轨道客车侧墙激光焊接与电阻点焊数值模拟对比研究

王春生，王文权，王洪潇，徐国成

《电焊机》

2020

Aluminium nitride layers prepared by nitrogen arc discharge on Al-Si alloy substrate

Xin Li, Weida Xin, Zhenan Ren, Yanxin Wang, Wenquan Wang

Journal of Materials Processing Technology

DOI

2020

The mechanism of rotational and non-rotational shoulder affecting the microstructure and mechanical properties of Al-Mg-Si alloy friction stir welded joint

Hua Ji, Yunlai Deng, Hongyong Xu, Sen Lin, Wenquan Wang, Honggang Dong

Materials & Design

DOI

2020

Microstructures and mechanical properties of Ni60 alloy fabricated by laser metal deposition

Wenquan Wang, Liang Liu, Xinge Zhang, Zimu Shi, Yingtao Tian, Jixing Lin

Materials Research Express

DOI

2019

H13钢表面电火花沉积Nb涂层组织与性能研究

栾程群，王文权，邝厘祥

《表面技术》

DOI

2019

Effects of dopants Ti and Al on microstructure, mechanical and tribological behaviors of ZnO/MoS2 coating deposited by magnetron co-sputtering

Ming Zhou Cao, Lan Zhao, Wenquan Wang, Huifang Han, Wenchang Lang

AIP Advances

DOI

2018

Effects of Ultrasonic Stirring on Microstructures of Al-7wt%Si Alloy Ingot

Shucheng Dong, Wenquan Wang, Zimu Shi, Jianguo Li

Journal of Physics Conference Series

DOI

2018

Strain Rate Dependence of Tensile Properties of Extruded Mg–9Y–3Zn–1Mn Alloy

Xiaoru Zhang, Zehui Wang, Yue Jiang, Guixun Sun, Zhonghao Jiang, Chaojie Che, Guangli Bi, Jiaan Liu, Wenquan Wang, Daqing Fang

Advanced Engineering Materials

DOI

2018

Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition

Ming Zhou Cao, Lan Zhao, Libin Wu, Wenquan Wang

Coatings

DOI

2018

Effects of Ar and He on Microstructures and Properties of Laser Welded 800MPa TRIP Steel

Wenquan Wang, Shucheng Dong, Fan Zhi Jiang, Ming Zhou Cao

MATEC Web of Conferences

DOI

2017

Grain Refinement and Mechanical Properties of Cu–Cr–Zr Alloys with Different Nano-Sized TiCp Addition

Dongdong Zhang, Fang Bai, Yong Wang, Jinguo Wang, Wenquan Wang

Materials

DOI

2017

Microstructures and Properties of Plasma Sprayed Ni Based Coatings Reinforced by TiN/C1-xNxTi Generated from In-Situ Solid-Gas Reaction

Wenquan Wang, Wenmo Li, Hongyong Xu

Materials

DOI

2016

等离子喷焊原位生成TiC硬质增强镍基耐磨层组织与性能

徐红勇，王文权，黄诗铭，程祥霞，任美璇

《金属学报》

2016

Mo对等离子喷焊Ni60A涂层组织与性能的影响

张野，王文权，徐红勇

《材料热处理学报》

2016

Effect of the pretreatment of silicone penetrant on the performance of the chromium-free chemfilm coated on AZ91D magnesium alloys

Shiuan-Ho Chang, Liyuan Niu, Yichang Su, Wenquan Wang, Xian Tong, Guangyu Li

Materials Chemistry and Physics

DOI

2015

NiCr-Cr3C2/Ni60B等离子喷焊层的组织与性能

徐红勇，王文权，黄诗铭，方丽琴

《材料热处理学报》

2015

CeO2对不锈钢表面激光熔覆钴基层组织和耐腐蚀性能的影响

牛丽媛，曹云龙，童先，林继兴，李光玉，王文权

《应用激光》

2015

Microstructures and Properties of NiCrBSi/WC Biomimetic Coatings Prepared by Plasma Spray Welding

Shiming Huang, Daqian Sun, Desheng Xu, Wenquan Wang, Hongyong Xu

Journal of Bionic Engineering

DOI

2015

Microstructures and properties of in-situ TiC particles reinforced Ni-based composite coatings prepared by plasma spray welding

Shiming Huang, Daqian Sun, Wenquan Wang, Hongyong Xu

Ceramics International

DOI

2015

Microstructures and properties of Ni based composite coatings prepared by plasma spray welding with mixed powders

Shiming Huang, Daqian Sun, Wenquan Wang

International Journal of Refractory Metals and Hard Materials

DOI

2013

CeO2/ZrO2-Y2O3纳米结构热障涂层的高温稳定性及耐腐蚀性能

宫文彪，李任伟，李于朋，孙大千，王文权

《金属学报》

2013

超高强钢薄板CMT焊接工艺研究

李琳，王文权，孟庆亮

《建设机械技术与管理》

DOI

2013

低碳钢多层板点焊动态过程测试与分析

李桂中，丁建，秦玉蝉，王文权

《焊接学报》

2013

Test and analysis of dynamic process for spot welding of multilayer low carbon steel sheets

Wenquan Wang

Transactions of the China Welding Institution

2012

激光焊接650MPa相变诱发塑性钢的组织与性能

王文权，商延赓，李秀娟，王春生，张桂兰

《吉林大学学报(工学版)》

2011

TiNi形状记忆合金/不锈钢异种材料激光焊研究

李洪梅，孙大千，董鹏，王文权，殷世强

《材料工程》

2010

等离子喷涂参数对镍基合金涂层组织及冲蚀磨损性能的影响

韩耀武，孙大千，谷小燕，王文权，宣兆志

《吉林大学学报(工学版)》

2010

CO2激光焊接600MPa DP钢接头组织与性能

王文权，马凯，孙大千，姜春云

《焊接学报》

2010

采用纯铜中间层的TiNi形状记忆合金激光焊接

李洪梅，孙大千，王文权，韩耀武，董鹏

《材料工程》

2010

Nd:YAG激光焊接800 MPa TRIP钢的接头组织与性能

王文权，马凯，孙大千，姜春云

《焊接学报》

2010

CeO2/ZrO2-Y2O3纳米结构热障涂层的制备与高温性能

宫文彪，李于朋，刘威，孙大千，王文权

《无机材料学报》

2009

奥氏体不锈钢丝激光焊接头的组织与力学性能

李洪梅，孙大千，王文权，宣兆志

《焊接学报》

2009

掺杂纳米CeO2对ZrO2-Y2O3热障涂层隔热性能的影响

宫文彪，白晶，刘威，孙大千，王文权

《复合材料学报》

2009

Effect of doped nano-CeO_2 on thermal insulation properties of ZrO_2-Y_2O_3 thermal barrier coatings

Wenquan Wang

Fuhe cailiao xuebao

2005

等离子喷涂纳米陶瓷热障涂层组织与性能研究

王文权

《吉林大学》

2003

汽车齿轮轴的等离子喷涂修复

王文权，宣兆志，殷世强，孙大谦

《汽车工艺与材料》

精选作品

期刊论文

镁合金表面超音速等离子喷涂Al-Al2O3/5YSZ涂层的组织与耐磨性能研究

The tribological mechanism and corrosion behavior of NiTi coating on 316L stainless steel substrate prepared by cold metal transfer arc

Microstructural and mechanical gradient mappings across ND–TD planes of ultra-thick 6061-T651 FSW joints

CMT-based wire-arc directed energy deposition functional bimetallic components of NiTi alloy and 316L stainless steel with a Cu interlayer: Revealing the influence of manufacturing sequences on microstructure and mechanical properties

Achieving superior mechanical properties in ultra-thick Al alloy friction stir welded joints

Investigation into the regulation of particle size and morphology of Nb521 alloy powders produced by ultra-high-speed plasma rotating electrode process

Effects of Flat Energy Director Thickness and Welding Time on Interface Formation for Ultrasonic Welding of GF / PPS Composites

Eliminating microstructural heterogeneity and overcoming the strength-ductility trade-off: Microstructural evolution and strengthening-toughening mechanisms of AFSD-processed AA7475 via hierarchical solid solution

Elevated-temperature tensile behavior of additive friction stir deposition-processed Ti-6Al-4V: Gradient microstructure and deformation mechanisms

Synergistic enhancement of mechanical interlocking and chemical bonding in Al alloy/CFRTP joints prepared by friction stir lap welding: Effect of laser surface texturing

Microstructure and mechanical properties of laser-welded titanium alloy/aluminum alloy joint with CoNiCu 1.25 Nb 0.5 V 1.25 HEA filler powder

Study on vacuum gas nitriding process and surface properties of AISI 430 stainless steel

工艺参数对22MnB5钢MAG焊接头成形及性能影响研究

复合细化变质处理ADC12铝合金的微观组织与力学性能

冷却速率对ADC12合金凝固组织与性能的影响

Synergistic effect of interfacial silane film and laser texturing on joining characteristics of pretreated Al/CFRTP friction stir welded joints

Microstructure and mechanical properties of AA6061/22MnB5 steel lap joints fabricated by friction element welding

Droplet control and grain refinement in magnetic-assisted CMT additive manufacturing of 2319 aluminum alloy

Microstructure and mechanical properties of NiTi/316L stainless steel dissimilar joint prepared by cold metal transfer welding

Microstructure and mechanical properties of magnesium alloy to galvanized steel dissimilar lap joints fabricated by CMT weld-brazing process

Enhanced strength-ductility synergy of Mg-Nd-Zn-Zr alloys fabricated by wire-arc directed energy deposition and subsequent heat treatment

Improving recrystallization of ultrasonic welded joint of SiCp/Al composites via pulsed current

Exceptional strength and ductility in 18Ni300/316 L heterogeneous bionic structures through laser additive manufacturing

Evolution of macro/mesoscopic thermal-mechanical fields in friction lap joining of surface-textured Al alloy to CFRTP

热处理工艺对锻造430F铁素体不锈钢组织和性能的影响

表面喷丸及退火处理对Fe-30Mn-3Al-3Si TWIP钢组织与性能的影响

Corrosion Behavior of Pre-oxidized GH4169 Alloy with Solid NaCl Deposited in a Wet Oxygen Flow at 600 °C

A new sight on the fracture behavior of GH4169 produced by NaCl-induced corrosion in a humid environment of 600 °C

The effect of NaCl-induced corrosion on Ti60′s hot salt stress corrosion cracking

Preparation and characterization of supersonic plasma sprayed Al–Al2O3–Cr2O3 composite coatings on magnesium alloy substrate

Microstructure and mechanical properties of Mg-Nd-Zn-Zr alloy fabricated by TIG-based wire – Arc directed energy deposition with pulsed current

ZM6铸造镁合金氩弧焊补焊特性与接头组织及性能

Nitrogen-induced optimization of corrosion resistance for nanocrystalline soft magnetic Fe-Zr-B alloys

Exploration on the Stress-induced Internal Corrosion of NaCl-Deposited GH4169 Under Humid Intermediate Temperature Environments

Microstructure and Mechanical Properties of Friction Stir Lap Welding Joint of Al/CU Dissimilar Metals

Weld formation, microstructure and mechanical properties of magnesium alloy and Al-Si-coated steel dissimilar lap joints fabricated by the CMT weld-brazing process

Enhancing bonding synergy and mechanical response of metal/composite hybrid joints through physicochemical surface pretreatment

Microstructure and mechanical properties of ZrC modified Ni60 hard-facing alloy fabricated by laser metal deposition

轨道客车铝车体用6005A-T6铝合金MIG焊接头的微观组织和力学性能

Design and Fabrication of Aluminum Honeycomb Sandwich Structures by Atmosphere Protect Brazing: Microstructural Evolution and Mechanical Behavior

H13钢表面电火花沉积WC-Ni基金属陶瓷涂层微观组织及摩擦磨损性能

选区激光熔化成形TiN/Inconel 718复合材料的组织和力学性能

Preparation and Properties of Mo Coating on H13 Steel by Electro Spark Deposition Process

Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro-textures

Microstructures and mechanical properties of Nb nanoparticles modified Ni60 hard-facing alloy fabricated by laser metal deposition

Process parameter optimization for selective laser melting of Inconel 718 superalloy and the effects of subsequent heat treatment on the microstructural evolution and mechanical properties

Influence of Assembly Gap Size on the Structure and Properties of SUS301L Stainless Steel Laser Welded Lap Joint

电火花沉积Ni/Ti(C,N)金属陶瓷复合涂层的组织及性能研究

不锈钢轨道客车侧墙激光焊接与电阻点焊数值模拟对比研究

Aluminium nitride layers prepared by nitrogen arc discharge on Al-Si alloy substrate

The mechanism of rotational and non-rotational shoulder affecting the microstructure and mechanical properties of Al-Mg-Si alloy friction stir welded joint

Microstructures and mechanical properties of Ni60 alloy fabricated by laser metal deposition

H13钢表面电火花沉积Nb涂层组织与性能研究

Effects of dopants Ti and Al on microstructure, mechanical and tribological behaviors of ZnO/MoS2 coating deposited by magnetron co-sputtering

Effects of Ultrasonic Stirring on Microstructures of Al-7wt%Si Alloy Ingot

Strain Rate Dependence of Tensile Properties of Extruded Mg–9Y–3Zn–1Mn Alloy

Tribological Properties of New Cu-Al/MoS2 Solid Lubricant Coatings Using Magnetron Sputter Deposition

Effects of Ar and He on Microstructures and Properties of Laser Welded 800MPa TRIP Steel

Grain Refinement and Mechanical Properties of Cu–Cr–Zr Alloys with Different Nano-Sized TiCp Addition

Microstructures and Properties of Plasma Sprayed Ni Based Coatings Reinforced by TiN/C1-xNxTi Generated from In-Situ Solid-Gas Reaction

等离子喷焊原位生成TiC硬质增强镍基耐磨层组织与性能

Mo对等离子喷焊Ni60A涂层组织与性能的影响

Effect of the pretreatment of silicone penetrant on the performance of the chromium-free chemfilm coated on AZ91D magnesium alloys

NiCr-Cr3C2/Ni60B等离子喷焊层的组织与性能

CeO2对不锈钢表面激光熔覆钴基层组织和耐腐蚀性能的影响

Microstructures and Properties of NiCrBSi/WC Biomimetic Coatings Prepared by Plasma Spray Welding

Microstructures and properties of in-situ TiC particles reinforced Ni-based composite coatings prepared by plasma spray welding

Microstructures and properties of Ni based composite coatings prepared by plasma spray welding with mixed powders

CeO2/ZrO2-Y2O3纳米结构热障涂层的高温稳定性及耐腐蚀性能

超高强钢薄板CMT焊接工艺研究

低碳钢多层板点焊动态过程测试与分析

Test and analysis of dynamic process for spot welding of multilayer low carbon steel sheets

激光焊接650MPa相变诱发塑性钢的组织与性能

TiNi形状记忆合金/不锈钢异种材料激光焊研究

等离子喷涂参数对镍基合金涂层组织及冲蚀磨损性能的影响

CO2激光焊接600MPa DP钢接头组织与性能

采用纯铜中间层的TiNi形状记忆合金激光焊接

Nd:YAG激光焊接800 MPa TRIP钢的接头组织与性能