陈淑江｜山东大学｜学者主页

2024

Analysis of load distribution for ball screws with circulation modes and geometric errors

Lei Lv, Shujiang Chen, Changhou Lu, Weike Wang

Mechanism and Machine Theory

DOI

2024

Research on trajectory control of rotor systems supported by a combination of rolling and hydrostatic bearings

Yixin Zhang, Wei Pan, Shujiang Chen, Changhou Lu, Yongtao Zhang

Precision Engineering

DOI

2024

Study on Load Distribution and Fatigue Elastic Life of Ball Screw under Ultimate Conditions

Lei Lv, Changhou Lu, Shujiang Chen, Weike Wang

Applied Sciences

DOI

2023

主控型液体静压轴承转子系统的模型辨识

王康，陈淑江，徐春望，路长厚

《轴承》

2023

基于重复控制的静压轴承-主轴系统非圆轴心轨迹成型技术研究

向绍通，潘伟，张艺馨，陈淑江，路长厚

《机械工程学报》

2023

嵌入控制油腔的静压主轴轴心运动主动控制分析与试验

陈淑江，徐春望，路长厚，王康

《吉林大学学报(工学版)》

2023

Mathematical Modeling and Experimental Characterization of the Piezoelectric Servo Valve System

Yixin Zhang, Wei Pan, Shujiang Chen, Yong‐Tao Zhang, Changhou Lu

Journal of Tribology

DOI

2023

Stability and infinite static stiffness of hydrostatic lead screw compensated with a single-action membrane restrictor

Yuanpeng Sha, Changhou Lu, Wei Pan, Shujiang Chen

Nonlinear Dynamics

DOI

2023

Surface modeling and load distribution analysis of ball screw formed by whirling milling

Lei Lv, Changhou Lu, Shujiang Chen

The International Journal of Advanced Manufacturing Technology

DOI

2022

基于EHNR与PSO-MOMEDA的轴承故障诊断

张蓝宁，马金奎，陈淑江

《组合机床与自动化加工技术》

2022

Discussion on Ball Screw Slide–Roll Ratio and Entrainment Velocity Calculation

Weike Wang, Shujiang Chen, Changhou Lu, Lei Lv

Machines

DOI

2021

不同坐标系下滑动轴承动特性系数计算方法的相互转换

王蕴馨，马金奎，陈淑江，路长厚，李佳，刘志颖

《润滑与密封》

2021

嵌入控制油腔的静压滑动轴承可控性研究

陈淑江，孙嘉珩

《北京理工大学学报》

DOI

2021

微织构对三油楔滑动轴承动静特性的影响

张扬，陈淑江

《制造技术与机床》

2021

新型动静压差速转台低速运动平稳性实验研究

王蕴馨，马金奎，陈淑江，路长厚，聂玉龙

《制造技术与机床》

DOI

2021

Investigating the Dynamic Characteristics of the Hydrostatic Bearing Spindle System With Active Piezoelectric Restrictors

Yixin Zhang, Wei Pan, Shuo Zhan, Ran Huang, Shujiang Chen, Changhou Lu

Journal of Tribology

DOI

2021

Direct compensation of the spindle rotation error with an active hydrostatic journal bearing system

Chunwang Xu, Shujiang Chen, Changhou Lu, Kang Wang, Jiaheng Sun

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

DOI

2021

Difference Between SFMR and SITMR Compensation for Hydrostatic Thrust Bearing

Yuanpeng Sha, Shujiang Chen, Changhou Lu, Wei Pan

Journal of Tribology

DOI

2020

Nonlinear Control System Design for Active Lubrication of Hydrostatic Thrust Bearing

Yuanpeng Sha, Changhou Lu, Wei Pan, Shujiang Chen, Peiqi Ge

Coatings

DOI

2020

The arbitrary boundary method to determine the performance of membrane-type restrictors

Yuanpeng Sha, Changhou Lu, Wei Pan, Shujiang Chen

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2020

An improved three-point method based on a difference algorithm

Ran Huang, Wei Pan, Changhou Lu, Yixin Zhang, Shujiang Chen

Precision Engineering

DOI

2019

新型动静压转台油膜力及动态特性研究

聂玉龙，马金奎，陈淑江，田再浩

《润滑与密封》

2019

新型动静压转台螺旋油楔几何参数优化

田再浩，马金奎，路长厚，陈淑江，聂玉龙

《组合机床与自动化加工技术》

DOI

2019

轴承-转子系统运动分析及主轴振动的相位控制

于哲，陈淑江，马金奎，路长厚，李昊

《北京理工大学学报》

DOI

2018

端面波对液体静压止推轴承静态特性的影响

张磊，路长厚，陈淑江，马金奎

《润滑与密封》

2018

新型动静压转台性能分析及参数优化

马金奎，田再浩，路长厚，陈淑江，聂玉龙

《华南理工大学学报(自然科学版)》

2018

柔性铰链可倾瓦轴承动静态特性研究

陈淑江，熊文涛，路长厚，马金奎

《振动与冲击》

2018

多项式函数结合对数螺旋线方程的织构型线优化

田再浩，马金奎，路长厚，陈淑江，聂玉龙

《表面技术》

2017

动静压柔性铰链可倾瓦轴承的阶跃载荷动态响应

李昊，陈淑江，马金奎，路长厚

《西安交通大学学报》

2017

传递函数法轴承-转子系统不平衡响应抑制

李昊，陈淑江，马金奎，路长厚

《西安交通大学学报》

2017

柔性铰链可倾瓦轴承不平衡响应的主动控制

常江，马金奎，路长厚，陈淑江

《组合机床与自动化加工技术》

2017

新型动静压转台承载特性分析及结构改进

刘云鹏，马金奎，陈淑江，路长厚

《组合机床与自动化加工技术》

2016

Performance Analysis of Capillary-Compensated Hydrostatic Lead Screws with Discontinuous Helical Recesses Including Influence of Pitch Errors in Nut

Yongtao Zhang, Shujiang Chen, Changhou Lu, Zichao Liu

Tribology Transactions

DOI

2016

Transient Motion of Hydrostatic Lead Screws With Continuous Helical Recesses

Yongtao Zhang, Changhou Lu, Wei Pan, Shujiang Chen, Yunpeng Liu

Journal of Tribology

DOI

2015

Averaging Effect on Pitch Errors in Hydrostatic Lead Screws With Continuous Helical Recesses

Yongtao Zhang, Changhou Lu, Wei Pan, Shujiang Chen, Zichao Liu

Journal of Tribology

DOI

2013

A method for measuring the hydrodynamic effect on the bearing land

Peng Liang, Changhou Lu, Jie Ding, Shujiang Chen

Tribology International

DOI

2012

Study on the influence of critical shear stress on wall slip of spiral oil wedge journal bearing

Lili Wang, Changhou Lu, Peiqi Ge, Shujiang Chen

Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology

DOI

2012

The Stability’s Influencing Factors and Active Control of Hydrostatic Journal Bearing

Peng Liang, Changhou Lu, Shujiang Chen, Jie Ding

DOI

2010

瞬变载荷作用下滑动轴承轴心轨迹计算仿真

马金奎，路长厚，陈淑江

《振动、测试与诊断》

2007

螺旋油楔滑动轴承润滑机理的理论与实验研究

陈淑江

《山东大学》

2007

出油孔对螺旋油楔动静压滑动轴承性能的影响

陈淑江，路长厚，马金奎

《润滑与密封》

2007

螺旋油腔动静压滑动轴承各向异性研究

陈淑江，路长厚，马金奎

《润滑与密封》

2006

新型螺旋油楔动静压滑动轴承的油腔结构研究

陈淑江，路长厚

《润滑与密封》

精选作品

期刊论文

Analysis of load distribution for ball screws with circulation modes and geometric errors

Research on trajectory control of rotor systems supported by a combination of rolling and hydrostatic bearings

Study on Load Distribution and Fatigue Elastic Life of Ball Screw under Ultimate Conditions

主控型液体静压轴承转子系统的模型辨识

基于重复控制的静压轴承-主轴系统非圆轴心轨迹成型技术研究

嵌入控制油腔的静压主轴轴心运动主动控制分析与试验

Mathematical Modeling and Experimental Characterization of the Piezoelectric Servo Valve System

Stability and infinite static stiffness of hydrostatic lead screw compensated with a single-action membrane restrictor

Surface modeling and load distribution analysis of ball screw formed by whirling milling

基于EHNR与PSO-MOMEDA的轴承故障诊断

Discussion on Ball Screw Slide–Roll Ratio and Entrainment Velocity Calculation

不同坐标系下滑动轴承动特性系数计算方法的相互转换

嵌入控制油腔的静压滑动轴承可控性研究

微织构对三油楔滑动轴承动静特性的影响

新型动静压差速转台低速运动平稳性实验研究

Investigating the Dynamic Characteristics of the Hydrostatic Bearing Spindle System With Active Piezoelectric Restrictors

Direct compensation of the spindle rotation error with an active hydrostatic journal bearing system

Difference Between SFMR and SITMR Compensation for Hydrostatic Thrust Bearing

Nonlinear Control System Design for Active Lubrication of Hydrostatic Thrust Bearing

The arbitrary boundary method to determine the performance of membrane-type restrictors

An improved three-point method based on a difference algorithm

新型动静压转台油膜力及动态特性研究

新型动静压转台螺旋油楔几何参数优化

轴承-转子系统运动分析及主轴振动的相位控制

端面波对液体静压止推轴承静态特性的影响

新型动静压转台性能分析及参数优化

柔性铰链可倾瓦轴承动静态特性研究

多项式函数结合对数螺旋线方程的织构型线优化

动静压柔性铰链可倾瓦轴承的阶跃载荷动态响应

传递函数法轴承-转子系统不平衡响应抑制

柔性铰链可倾瓦轴承不平衡响应的主动控制

新型动静压转台承载特性分析及结构改进

Performance Analysis of Capillary-Compensated Hydrostatic Lead Screws with Discontinuous Helical Recesses Including Influence of Pitch Errors in Nut

Transient Motion of Hydrostatic Lead Screws With Continuous Helical Recesses

Averaging Effect on Pitch Errors in Hydrostatic Lead Screws With Continuous Helical Recesses

A method for measuring the hydrodynamic effect on the bearing land

Study on the influence of critical shear stress on wall slip of spiral oil wedge journal bearing

The Stability’s Influencing Factors and Active Control of Hydrostatic Journal Bearing

瞬变载荷作用下滑动轴承轴心轨迹计算仿真

螺旋油楔滑动轴承润滑机理的理论与实验研究

出油孔对螺旋油楔动静压滑动轴承性能的影响

螺旋油腔动静压滑动轴承各向异性研究

新型螺旋油楔动静压滑动轴承的油腔结构研究

研究方向