邹斌｜山东大学｜学者主页

2026

邹斌，全涛，张广旭，王鑫锋，孙赫武，马贤骅

《航空制造技术》

DOI

2025

Advanced materials research

DOI

2011

C.Z. Huang, L. Zhang, Lei He, Junlong Sun, Bin Fang, Bin Zou, Zhaofeng Li, Xing Ai

Journal of Materials Processing Technology

DOI

精选作品

期刊论文

Integrated Computer‐Aided Hybrid Additive Manufacturing of Multimaterial Ceramics via Stereolithography and Material Extrusion Compound Process

Preparation and precision control of alumina-based ceramic core using the SLA-Micromilling hybrid process

Non-planar additive manufacturing continuous fiber reinforced composite curved grid structure and its impact characterization

Influence of FDM-3D Printing Parameters on the Tensile Property and ILSS of CCF/PA and CF/PEEK Composites

Study on Inter/Intralayer Layout and Mechanical Behavior of 3D Printed Hybrid Continuous Carbon/Glass Fiber Composites

Electromagnetic absorption performance of Mn-Zn ferrite prepared by light-curing 3D printing

材料体系和孔隙率梯度增强结构对3D打印氧化铝多孔陶瓷的性能影响

增减材复合制造技术

A level set-based process planning method for the additive and subtractive hybrid manufacturing of a flow channel with an inner cavity

Multi-material hybrid additive manufacturing of polymer-derived SiC ceramic composites

Shape memory polyurethane material with programmable interface promotes osteogenesis in vitro

A high-performance longitudinal–bending ultrasonic vibration horn: structural innovation and dynamic testing

Microstructure and Mechanical Properties of 316L Stainless Steel Components Fabricated via Direct Energy Deposition: An Additive Manufacturing Approach

Wet etching after femtosecond laser machining for efficient fabrication of consistent inverted pyramid microstructures on monocrystalline silicon surfaces

The evolution mechanism of femtosecond laser-induced periodic structure on monocrystalline silicon with scanning rate and the associated material rearrangement process

Laser-Based Two-Step Fabrication Method of Near-Damage-Free Controllably Superhydrophobic Antireflection Micronano Structures of Monocrystalline Silicon

Study of a high solid content Mn-Zn ferrite ceramic paste system based on SLA printing and its light curing mechanism

Enhanced strength, ductility and high-temperature behavior of GH4169-TiB2/TiC gradient materials through a dual gradient printing strategy

Graphene oxide and in-situ carbon reinforced hydroxyapatite scaffolds via ultraviolet-curing 3D printing technology with high osteoinductivity for bone regeneration

Multi-material ceramic hybrid additive manufacturing based on vat photopolymerization and material extrusion compound process

Non-planar additive manufacturing of pre-impregnated continuous fiber reinforced composites using a three-axis printer

Advancements in multi-material additive manufacturing of advanced ceramics: A review of strategies, techniques and equipment

Effects of Surface-Modified Hap on the Properties of Bioceramic Paste for Sla-3D Printing

Recent Advancements in the Additive Manufacturing of Mullite Ceramic Filter Elements for High-Temperature Melt Filtration

Tailored microstructure and enhanced high temperature behavior of TiC/Inconel 718 composites through dual-gradient printing strategy in direct energy deposition

Construction of bilayer biomimetic periosteum based on SLA-3D printing for bone regeneration

3D-printed laponite bioceramic triply periodic minimal surface scaffolds with excellent bioactivity for bone regeneration

Stereolithography Printing and Mechanical Properties of Polyethylene Glycol Diacrylate/Hexagonal Boron Nitride Ceramic Composites

Enhanced high temperature mechanical and oxidation behavior of direct energy deposited TiC/Inconel 718 gradient coatings

Study on liquid-phase sintering and magnetic properties of SLA-printed Mn-Zn ferrite ceramics

Modeling and optimizing of laser-assisted waterjet process parameters for near-damage-free micromachining of monocrystalline silicon

3D printing of PEGDA/bioceramic for guiding cell adhesion and migration

SLA-3d printed building and characteristics of GelMA/HAP biomaterials with gradient porous structure

Layer thickness and path width setting in 3D printing of pre-impregnated continuous carbon, glass fibers and their hybrid composites

Layout design and mechanical behavior of 3D printed intralayer hybrid continuous carbon/glass fiber composites

Grinding damage mechanisms and wear mechanisms of the new cermet micro-milling cutters

Polyelectrolyte Multilayer Coating on 3D Printed PEGDA/TCP Scaffold with Improved Cell Proliferation

Topology optimisation for vat photopolymerization 3D printing of ceramics with flushing jet accessibility constraint

A real-time detection system for multiscale surface defects of 3D printed ceramic parts based on deep learning

连续纤维增强复合材料3D打印技术现状及展望

Special issue on machine learning in additive manufacturing

Hybrid layout and additive manufacturing of continuous carbon/glass fibers reinforced composites, and its effect on mechanical properties

Research on rapid detection of cross-scale defects in surface based on deep learning

Chatter failure comparison for high-speed milling of aerospace GH4099 with silicon nitride ceramic end mills: A laboratory scale investigation

Study on anti-interference detection of machining surface defects under the influence of complex environment

Study on the 3D-printed surface defect detection based on multi-row cyclic scanning method

Research on reconstruction and high-precision detection of tool wear edges under complex lighting environmental influences

Array structure of monocrystalline silicon surface processed by femtosecond laser machining assisted with anisotropic chemical etching

Study on the hot isostatic pressing post-treatment of FDM-3D printed continuous carbon fiber reinforced composites

Cutting Performance and Wear Behavior of Self‐Developed Silicon Nitride Ceramic End Mills with Optimized Structure for High‐Speed Machining of GH4099

Geometric Structures for Sialon Ceramic Solid End Mills and Its Performance in High-Speed Milling of Nickel-Based Superalloys

Research on Curved Parts Surface Quality Detection during Laser‐Directed Energy Deposition Based on Blurry Inpainting Network

Effect of printing design and forming thermal environment on pseudo-ductile behavior of continuous carbon/glass fibers reinforced nylon composites

Study on the Sustainable Detection of Machining Surface Defects under the Influence of Environmental Interference

The 3D-Printed building and performance of Al2O3 ceramic filters with gradient hole density structures

Effect of TiC Content on Mechanical Properties and Microstructure Evolution of TiC/Inconel 718 Functionally Gradient Materials by Direct Energy Deposition

Research on the sustainable measurement of machined surface roughness under the influence of cutting environment

Preparation of pre-impregnated continuous carbon fiber reinforced nylon6 filaments and the mechanical properties of 3D printed composites

Research on anti-interference detection of 3D-printed ceramics surface defects based on deep learning

Challenges in topology optimization for hybrid additive–subtractive manufacturing: A review

Microstructure Evolution of TiC/Inconel 718 Composites Prepared by Direct Energy Deposition

Modeling and prediction for frequency response functions of parameter-varying mechanical systems based on generalized receptance coupling substructure analysis

Effect of process parameters on mechanical properties of Inconel718 superalloy fabricated by directional energy deposition

Microstructure, mechanical properties and machinability of 316L stainless steel fabricated by direct energy deposition

Preparation, characterization and coloring mechanism of 3D printed colorful ZrO2 ceramics parts

A study on the roughness detection for machined surface covered with chips based on deep learning

Additive manufacturing of graphene oxide/hydroxyapatite bioceramic scaffolds with reinforced osteoinductivity based on digital light processing technology

The defect detection of 3D-printed ceramic curved surface parts with low contrast based on deep learning

Design, manufacturing and properties of controllable porosity of ceramic filters based on SLA-3D printing technology

Influence of irradiation parameters on the curing and interfacial tensile strength of HAP printed part fabricated by SLA-3D printing

Shear and Tensile Behaviors of Fiber-Reinforced Resin Matrix Composites Printed by the FDM Technology

SLA-3d printing and compressive strength of PEGDA/nHAP biomaterials

Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites

The machined surface defect detection of improved superpixel segmentation and two-level region aggregation based on machine vision

Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing

Functionally graded polyetheretherketone-based composites additively manufactured by material extrusion using a transition interface design method

Intelligent Design Optimization System for Additively Manufactured Flow Channels Based on Fluid–Structure Interaction

Mechanically robust Ti3C2Tx MXene/Carbon fiber fabric/Thermoplastic polyurethane composite for efficient electromagnetic interference shielding applications